A perturbation method for finite element modeling of piezoelectric vibrations in quartz plate resonators

When the piezoelectric stiffening matrix is added to the mechanical stiffness matrix of a finite element model, its sparse matrix structure is destroyed. A direct consequence of this loss in sparseness is a significant rise in memory and computational time requirements for the model. For weakly coupled piezoelectric materials, the matrix sparseness can be retained by a perturbation method which separates the mechanical eigenvalue solution from its piezoelectric effects. Using this approach, a perturbation and finite element scheme for weakly coupled piezoelectric vibrations in quartz plate resonators has been developed. Finite-element matrix equations were derived specifically for third-overtone thickness-shear, SC-cut quartz plate resonators with electrode platings. High-frequency piezoelectric plate equations were employed in the formulation of the finite element matrix equation. Results from the perturbation method compared well with the direct solution of the piezoelectric finite element equations. This method will result in significant savings in the computer memory and computational time. Resonance and antiresonance frequencies of a certain mode could be calculated easily by using the same eigenpair from the purely mechanical stiffness matrix. Numerical results for straight crested waves in a third overtone SC-cut quartz strip with and without electrodes are presented. The steady-state response to an electrical excitation is calculated.<>