Title :
Current Limiting Characteristics of Integrated Three-Phase Flux-Lock Type SFCL
Author :
Lim, Sung-Hun ; Choi, Hyo-Sang ; Han, Byoung-Sung
Author_Institution :
Res. Center of Ind. Technol., Chonbuk Nat. Univ., Jeonju
fDate :
6/1/2006 12:00:00 AM
Abstract :
The short circuit analysis of the integrated three phase flux-lock type superconducting fault current limiter (SFCL), which consisted of three-phase flux-lock reactor wound on an iron core with the same turn´s ratio between coil 1 and coil 2 for each single phase, was performed. In a normal time, the flux generated in the iron core is zero because the flux generated between two coils of each single-phase is canceled out. In a fault time, the integrated three-phase flux-lock type SFCL showed the different fault current limiting characteristics from other three-phase SFCLs with the separated three iron cores. Through the computer simulation for the three-phase circuit with its equivalent circuit, the current limiting characteristics of the integrated three-phase flux-lock type SFCL were analyzed
Keywords :
cores; digital simulation; fault current limiters; reactors (electric); short-circuit currents; superconducting coils; coil; computer simulation; current limiting characteristics; equivalent circuit; fault type; flux-lock reactor; iron core; short circuit analysis; superconducting fault current limiter; three-phase flux-lock type SFCL; Circuit analysis; Circuit faults; Computer simulation; Current limiters; Fault current limiters; Fault currents; Inductors; Iron; Superconducting coils; Wounds; Current limiting characteristics; fault types; integrated three-phase flux-lock type SFCL; iron core;
Journal_Title :
Applied Superconductivity, IEEE Transactions on
DOI :
10.1109/TASC.2006.871269
