<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
The author´s reply to the discussion on "A general theory of depreciation of engineering plant"
2
The author´s reply to the discussion on "A graphical analysis for non-linear systems"
3
The author´s reply to the discussion on "A million-volt resonant-cavity X-ray tube"
4
The author´s reply to the discussion on "A new approach to the design of pulse-monitored servo systems"
5
The author´s reply to the discussion on "A new approach to the theory and operation of electrostatic precipitators for use on pulverized-fuel-fired boilers"
6
The author´s reply to the discussion on "A new precision a.c. voltage stabilizer"
7
The author´s reply to the discussion on "A simplified method for checking the orientation of the optic axis of meter jewels"
8
The author´s reply to the discussion on "A single-sideband controlled-carrier system for aircraft communication"
9
The author´s reply to the discussion on "A study of some of the properties of materials affecting valve reliability"
10
The author´s reply to the discussion on "A study of the long-term emission behaviour of an oxide-cathode valve"
11
The author´s reply to the discussion on "A survey of external and suppressed aircraft aerials for use in the high-frequency band"
12
The author´s reply to the discussion on "A survey of performance criteria and design considerations for high-quality monitoring loudspeakers"
13
The author´s reply to the discussion on "A survey of present knowledge of thermionic emitters"
14
The author´s reply to the discussion on "A system utilizing coarse and fine position-measuring elements simultaneously in remote-position-control servo mechanisms"
15
The author´s reply to the discussion on "A vector method for amplitude-modulated signals"
16
The author´s reply to the discussion on "A.C. railway electrification at 50 c/s in Great Britain"
17
The author´s reply to the discussion on "Aids to training""the design of radar synthetic training devices for the R.A.F."
18
The author´s reply to the discussion on "Alternating-current-instrument testing equipment"
19
The author´s reply to the discussion on "An 8-MeV linear accelerator for X-ray therapy"
20
The author´s reply to the discussion on "An analogue computer for nuclear power studies" and "The application of analogue methods to compute and predict xenon poisoning in a high-flux nuclear reactor"
21
The author´s reply to the discussion on "An analogue electronic multiplier using transistors as square-wave modulators"
22
The author´s reply to the discussion on "An attracted-disc absolute voltmeter"
23
The author´s reply to the discussion on "An electrolytic-tank equipment for the determination of electron trajectories, potential and gradient" and "A method of tracing electron trajectories in crossed electric and magnetic fields"
24
The author´s reply to the discussion on "An electrostatic dust monitor"
25
The author´s reply to the discussion on "An investigation into the mechanism of magnetic-tape recording"
26
The author´s reply to the discussion on "An investigation of the usefulness of back-scatter sounding in the operation of h.f. broadcast services"
27
The author´s reply to the discussion on "Broad-band slot-coupled microstrip directional couplers", "The application of printed-circuit techniques to the design of microwave components" and "Re-entrant transmission-line filter using printed conductors"
28
The author´s reply to the discussion on "Cathode-spot behaviour and the thermal control of the emission zone in mercury-arc rectifiers"
29
The author´s reply to the discussion on "Conversion of a railway system from d.c. to a.c. high-voltage operation"
30
The author´s reply to the discussion on "Design considerations for a radiotelegraph receiving system"
31
The author´s reply to the discussion on "Development of the formulae of electromagnetism in the M.K.S. system"
32
The author´s reply to the discussion on "Dielectric admittances in current transformers"
33
The author´s reply to the discussion on "Discrete analogue-computer compensation of sampled-data control systems"
34
The author´s reply to the discussion on "Domestic electrical installationsߝsome safety aspects"
35
The author´s reply to the discussion on "Domestic electrical installationsߝsome safety aspects"
36
The author´s reply to the discussion on "Earth-electrode systems for large electric stations"
37
The author´s reply to the discussion on "Earthing of low- and medium-voltage distribution systems and equipment"
38
The author´s reply to the discussion on "Electric lifts in post-war housing"
39
The author´s reply to the discussion on "Electrical and magnetic measurements in an electrical engineering factory"
40
The author´s reply to the discussion on "Electrical control of dangerous machinery and processes. Part 2: Electrically interlocked guards on machines"
41
The author´s reply to the discussion on "Electrical control of dangerous machinery and processes. Part 3: Remote and supervisory control"
42
The author´s reply to the discussion on "Electrical weighing"
43
The author´s reply to the discussion on "Electricity in newspaper printing"
44
The author´s reply to the discussion on "Electricity supplyߝa statistical approach to some particular problems"
45
The author´s reply to the discussion on "Electronic telephone exchanges"
46
The author´s reply to the discussion on "Equipment of instrumental accuracy for recording and reproduction of electrical signals, using cinematographic film"
47
The author´s reply to the discussion on "Examples of geoelectric surveys"
48
The author´s reply to the discussion on "Fixed resistors for use in communication equipment"
49
The author´s reply to the discussion on "Fluorescent discharge-tube circuits and operating problems"
50
The author´s reply to the discussion on "Fluorescent discharge-tube circuits and operating problems"
51
The author´s reply to the discussion on "Frequency patterns for multiple-radio-channel routes"
52
The author´s reply to the discussion on "Frequency-modulation radar for use in the mercantile marine"
53
The author´s reply to the discussion on "Generator/motor problems in pumped-storage installations"
54
The author´s reply to the discussion on "High-current-density thermionic emitters: a survey"
55
The author´s reply to the discussion on "High-quality microphones"
56
The author´s reply to the discussion on "High-speed electronic-analogue computing techniques"
57
The author´s reply to the discussion on "Hot-cathode thyratrons: practical studies of characteristics"
58
The author´s reply to the discussion on "Industrial applications of electronic techniques"
59
The author´s reply to the discussion on "Industrial applications. Part I"
60
The author´s reply to the discussion on "Instrument transformers"
61
The author´s reply to the discussion on "Instruments for use in the microwave band"
62
The author´s reply to the discussion on "Joints, sealing ends and accessories for pressure cable"
63
The author´s reply to the discussion on "Joints, sealing ends and accessories for pressure cable"
64
The author´s reply to the discussion on "Lightning surges on transmission lines in Ireland"
65
The author´s reply to the discussion on "Load dispatching and the reasons for it, with special reference to the British grid system"
66
The author´s reply to the discussion on "Low-frequency radio-wave propagation by the ionosphere, with particular reference to long-distance navigation"
67
The author´s reply to the discussion on "Magnetic tape for data recording"
68
The Author´s Reply to the Discussion on "Mechanical Strength of Power Transformers in Service"
69
The author´s reply to the discussion on "Meter and instrument jewels and pivots"
70
The author´s reply to the discussion on "Microwave apparatus-II"
71
The author´s reply to the discussion on "Mine locomotives"
72
The author´s reply to the discussion on "Molecular interaction"
73
The author´s reply to the discussion on "New possibilities in speech transmission"
74
The author´s reply to the discussion on "Selection of transformers for use in distribution networks"
75
The author´s reply to the discussion on "Silicone electrical insulation"
76
The author´s reply to the discussion on "Small power transformers for aircraft electrical equipments"
77
The author´s reply to the discussion on "Small power transformers for aircraft electrical equipments"
78
The author´s reply to the discussion on "Solar radio-frequency radiation"
79
The author´s reply to the discussion on "Some aspects of the design of balanced rectifier modulators for precision applications" and "The effects of an unwanted signal mixed with the carrier supply of ring and Cowan modulators"
80
The author´s reply to the discussion on "Some aspects of the design of v.h.f. mobile radio systems"
81
The author´s reply to the discussion on "Some considerations in the design of negative-feedback amplifiers"
82
The author´s reply to the discussion on "Some design features of the semi-outdoor power station at Ince"
83
The author´s reply to the discussion on "Some notes on electrical installations in large chemical factories"
84
The author´s reply to the discussion on "Some notes on the design of h.v. transmission lines, with special reference to conditions in India and Pakistan"
85
The author´s reply to the discussion on "Some researches on current chopping in high-voltage circuit-breakers"
86
The author´s reply to the discussion on "Standardization and simplification in the electrical industry"
87
The author´s reply to the discussion on "Technical colleges and education for the electrical industry"
88
The author´s reply to the discussion on "The acoustic design of talks studios and listening rooms"
89
The author´s reply to the discussion on "The adhesion of electric locomotives"
90
The author´s reply to the discussion on "The analogies between the vibrations of elastic membranes and the electromagnetic fields in guides and cavities"
91
The author´s reply to the discussion on "The characteristics and control of rectifier-motor variable-speed drives"
92
The author´s reply to the discussion on "The computer in a non-arithmetic role"
93
The author´s reply to the discussion on "The co-ordination of insulation of high-voltage electrical installations"
94
The author´s reply to the discussion on "The co-ordination of insulation of high-voltage electrical installations"
95
The author´s reply to the discussion on "The cost and efficiency of earthing on low- and medium-voltage overhead line systems"
96
The author´s reply to the discussion on "The Deltic locomotive"
97
The author´s reply to the discussion on "The design and performance of surge diverters for the protection of alternating-current systems"
98
The author´s reply to the discussion on "The development and design of electrical control-gear for machine tools"
99
The author´s reply to the discussion on "The dimming of low-pressure discharge lamps"
100
The author´s reply to the discussion on "The economics of low-voltage electricity supplies to new housing estates"
101
The author´s reply to the discussion on "The electrical engineering industry in the post-war economy. Part II"
102
The author´s reply to the discussion on "The field strengths required for the reception of television in bands I, III, IV and V"
103
The author´s reply to the discussion on "The future of electrics and electronics in aircraft"
104
The author´s reply to the discussion on "The inductor compass"
105
The author´s reply to the discussion on "The influence of consumers´ load/consumption characteristics on metering practice"
106
The author´s reply to the discussion on "The influence of irradiation on the measurement of impulse voltages with sphere-gaps"
107
The author´s reply to the discussion on "The influence of maintenance requirements on the design of electrical installation equipment"
108
The author´s reply to the discussion on "The lightning protection of high-voltage overhead transmission and distribution systems"
109
The author´s reply to the discussion on "The lightning strength of power transformers"
110
The author´s reply to the discussion on "The logical approach to the problems of space warming by electricity"
111
The author´s reply to the discussion on "The logical approach to the problems of space warming by electricity"
112
The author´s reply to the discussion on "The measurement of balanced and unbalanced impedences at frequencies near 500 Mc/s, and its application to the determination of the propagation constants of cables"
113
The author´s reply to the discussion on "The measurement of interlaminar resistance of varnish-insulated silicon-steel sheet for large electrical machines"
114
The author´s reply to the discussion on "The measurement of light and colour"
115
The author´s reply to the discussion on "The motor uniselector and the technique of its application in telecommunication"
116
The author´s reply to the discussion on "The motor uniselector and the technique of its application in telecommunication"
117
The author´s reply to the discussion on "The operational characteristics of modern h.v. wood-pole lines"
118
The author´s reply to the discussion on "The operational characteristics of modern h.v. wood-pole lines"
119
The author´s reply to the discussion on "The organization of industrial electrical maintenance"
120
The author´s reply to the discussion on "The organization of industrial electrical maintenance"
121
The author´s reply to the discussion on "The parallel-T d.c. amplifier: a low-drift amplifier with wide frequency response"
122
The author´s reply to the discussion on "The performance of the British grid system in thunderstorms"
123
The Author´s Reply to the Discussion on "The Planning and Construction of Large Modern Thermal Generating Stations"
124
The author´s reply to the discussion on "The planning of an electricity board´s distribution system´"
125
The author´s reply to the discussion on "The propagation of surge voltages through turbo-alternators with concentric-conductor-type windings"
126
The author´s reply to the discussion on "The protection of structures against lightning"
127
The author´s reply to the discussion on "The relation between picture size, viewing distance and picture quality"
128
The author´s reply to the discussion on "The reliability and life of impregnated-paper capacitors"
129
The author´s reply to the discussion on "The resistance of sheet insulation to surface discharges"
130
The author´s reply to the discussion on "The Royal Festival Hall: electrical installation"
131
The author´s reply to the discussion on "The shielding of overhead lines against lightning"
132
The author´s reply to the discussion on "The signalling problems associated with register-controlled automatic telephone exchanges"
133
The author´s reply to the discussion on "The study of a magnetic inverter for amplification of low-input-power d.c. signals"
134
The author´s reply to the discussion on "The supply of electricity in the London area"
135
The author´s reply to the discussion on "The teaching of the principles of electrical machine design"
136
The author´s reply to the discussion on "The testing, reconditioning and servicing of domestic appliances"
137
The author´s reply to the discussion on "The training of oversea graduate engineers, with particular reference to the F.B.I. Scholarships Scheme"
138
The author´s reply to the discussion on "The use of saturable reactors as discharge devices for pulse generators"
139
The author´s reply to the discussion on "The valuation and capitalization of transformer losses"
140
The author´s reply to the discussion on "Theory of servo systems, with particular reference to stabilization"
141
The author´s reply to the discussion on "Thermionic valves of improved quality for government and industrial purposes"
142
The author´s reply to the discussion on "Tidal power and the Severn Barrage"
143
The author´s reply to the discussion on "Tidal power and the Severn Barrage"
144
The author´s reply to the discussion on "Time sharing as a basis for electronic telephone switching. A switched-highways system"
145
The author´s reply to the discussion on "Transformer economic efficiency"
146
The author´s reply to the discussion on "Transient theory of synchronous generators connected to power systems"
147
The author´s reply to the discussion on "Transistor circuits and applications"
148
The author´s reply to the discussion on "Transmission and distribution of electricity to mines"
149
The author´s reply to the discussion on "Tuning devices for broadcast radio receivers"
150
The author´s reply to the discussion on "Underground lighting in coal mines"
151
The author´s reply to the discussion on "User experience with powerful Ward Leonard d.c. machine drives for gas circulators at Calder Hall"
152
The author´s reply to the discussion on "V.H.F. sound broadcasting. Subjective appraisal of distortion due to multi-path propagation in f.m. reception"
153
The author´s reply to the discussion on "Variable-voltage generation applied to a.c. power systems"
154
The author´s reply to the discussion on "Voltage-operated earth-leakage protection"
155
The author´s reply to the discussion on "War-time broadcasting"
156
The author´s reply to the discussion on "Water-turbine-driven induction generators"
157
The author´s reply to the discussion on "Waterworks power-plant practice: the comparative costs of steam-, Diesel- and electrically-operated machinery"
158
The author´s reply to the discussion on ´´Economics of high-voltage transmission by underground cables´
159
The author´s reply to the discussion on ´A basis for the prediction of performance of hearing aids´
160
The author´s reply to the discussion on ´A method of increasing the range of V.H.F. communication systems by multi-carrier amplitude modulation´
161
The author´s reply to the discussion on ´A new type of electron-optical voltmeter´
162
The author´s reply to the discussion on ´A sensitive recording magnetometer´
163
The author´s reply to the discussion on ´A survey of electrical sheet steels for power plant and the factors affecting their magnetic properties´
164
The author´s reply to the discussion on ´A survey of metering practice on the British grid system´
165
The author´s reply to the discussion on ´A survey of the telephone transmission-rating problem´
166
The author´s reply to the discussion on ´A survey of X-rays in engineering and industry´
167
The author´s reply to the discussion on ´A survey of X-rays in engineering and industry´
168
The author´s reply to the discussion on ´Aerials for use on aircraft: a comparison between fixed and trailing types on the 900-metre waveband´
169
The author´s reply to the discussion on ´Age and the incidence of fires in electrical installations´
170
The author´s reply to the discussion on ´Air-blast circuit-breakers´
171
The author´s reply to the discussion on ´An analysis of the load on a modern electricity-supply system´
172
The author´s reply to the discussion on ´An analysis of the problems of long-line telephone signalling´
173
The author´s reply to the discussion on ´An introduction to hyperbolic navigation, with particular reference to Loran´
174
The author´s reply to the discussion on ´Cable terminations´
175
The author´s reply to the discussion on ´Cable Terminations´
176
The author´s reply to the discussion on ´Comparisons between gas and electricity on the basis of coal economy´
177
The author´s reply to the discussion on ´Comparisons between gas and electricity on the basis of coal economy´
178
The author´s reply to the discussion on ´Computer input and output, including analogue-digital conversion´
179
The author´s reply to the discussion on ´Coreless induction furnaces´
180
The author´s reply to the discussion on ´Developments in railway signalling on London Transport´
181
The author´s reply to the discussion on ´Distribution of tensile load in relation to temperature and sag of steel-cored aluminium conductors´
182
The author´s reply to the discussion on ´Electrical control of dangerous machinery and processes´
183
The author´s reply to the discussion on ´Electrical engineering problems in the tropics´
184
The author´s reply to the discussion on ´Electro-farming, or the applications of electricity to agriculture´
185
The author´s reply to the discussion on ´Electrostatic precipitation of dust from boiler-plant flue gases´
186
The author´s reply to the discussion on ´Energy conversion in electronic devices´
187
The author´s reply to the discussion on ´Engineering and scientific applications of digital computers´
188
The author´s reply to the discussion on ´Factors governing specifications for electric power cables´
189
The author´s reply to the discussion on ´Fluorescent lamps´
190
The author´s reply to the discussion on ´Frequency modulation´
191
The author´s reply to the discussion on ´Frequency modulation´
192
The author´s reply to the discussion on ´Fundamental legislation for electricity supply to consumers´
193
The author´s reply to the discussion on ´Fundamental principles of automatic regulators and servo mechanisms´
194
The author´s reply to the discussion on ´General factors affecting the unification of electricity supply tariffs´
195
The author´s reply to the discussion on ´Generating plant for military equipment´
196
The author´s reply to the discussion on ´Industrial applications of electronic techniques´
197
The author´s reply to the discussion on ´Lightning´ before the Institution
198
The author´s reply to the discussion on ´Long-distance point-to-point communication´
199
The author´s reply to the discussion on ´Materials for electrical contacts´
200
The author´s reply to the discussion on ´Maximum-demand metering: a study of the timing and length of the integration period´
201
The author´s reply to the discussion on ´Mechanical stresses in transformer windings´
202
The author´s reply to the discussion on ´Modern electric lift practice´
203
The author´s reply to the discussion on ´Modern electric lift practice´
204
The author´s reply to the discussion on ´Multipath interference in television transmission´
205
The author´s reply to the discussion on ´Naval communication´
206
The author´s reply to the discussion on ´Notes on the stability of LC oscillators´
207
The author´s reply to the discussion on ´Numerical analysis II´
208
The author´s reply to the discussion on ´Operational experience at Calder Hall´
209
The author´s reply to the discussion on ´Parasitic forces existing in induction watt-hour meters´
210
The author´s reply to the discussion on ´Performance of natural-draught water-cooling towers´
211
The author´s reply to the discussion on ´Planning the future electricity meter´
212
The author´s reply to the discussion on ´Progress in aircraft aerials´
213
The author´s reply to the discussion on ´Pulse-time-modulation terminals for music transmission over radio links´
214
The author´s reply to the discussion on ´Quantitative tests on finished mouldings´
215
The author´s reply to the discussion on ´Radar echoes from meteorological precipitation´
216
The author´s reply to the discussion on ´Radio valve life testing´
217
The author´s reply to the discussion on ´Radiocommunication in the power industry´
218
The author´s reply to the discussion on ´Railway electrification in Great Britain´
219
The author´s reply to the discussion on ´Recent progress in the design of the high-voltage overhead lines of the British grid system´
220
The author´s reply to the discussion on ´Reference-crystal-controlled v.h.f. equipment´
221
The author´s reply to the discussion on ´Remote switching by superimposed currents´
222
The author´s reply to the discussion on ´Safety in the use of portable and transportable electrical equipment in industry´
223
The author´s reply to the discussion on ´Sealed transformers´
224
The author´s reply to the discussion on ´Some factors affecting the design of electric lighting installations for building interiors´
225
The author´s reply to the discussion on ´Some notes on transformer practice with reference to standardization´
226
The author´s reply to the discussion on ´Some notes on transformer practice with reference to standardization´
227
The author´s reply to the discussion on ´Speech communication under conditions of deafness or loud noise´
228
The author´s reply to the discussion on ´Speech communication under conditions of deafness or loud noise´
229
The author´s reply to the discussion on ´Standardization and design of A.C. turbo-type generators´
230
The author´s reply to the discussion on ´Standardization as applied to industrial electrical instruments´
231
The author´s reply to the discussion on ´Standardization of power cables´
232
The author´s reply to the discussion on ´Steel tower economics´
233
The author´s reply to the discussion on ´Stray losses in synchronous electrical machinery´
234
The author´s reply to the discussion on ´Stray losses in synchronous electrical machinery´
235
The author´s reply to the discussion on ´Street lighting´
236
The author´s reply to the discussion on ´Television broadcasting practice in America´1927 to 1944´
237
The author´s reply to the discussion on ´Temperature compensation in indicating and recording instruments´
238
The author´s reply to the discussion on ´Tests for the selection of components for broadcast receivers´
239
The author´s reply to the discussion on ´The aeronautical aspect´
240
The author´s reply to the discussion on ´The analysis of vibration problems´
241
The author´s reply to the discussion on ´The application and use of quartz crystals in telecommunications´
242
The author´s reply to the discussion on ´The characteristics and errors of capacitors used for measurement purposes´
243
The author´s reply to the discussion on ´The control of electrical installation work´
244
The author´s reply to the discussion on ´The control of electrical installation work´, North-Western Centre, at Manchester, 15th October, 1946
245
The author´s reply to the discussion on ´The design and operation of high-power broadcast transmitter units with their outputs combined in parallel´
246
The author´s reply to the discussion on ´The design of a high-fidelity disc recording equipment´
247
The author´s reply to the discussion on ´The design of an ellipsoid voltmeter for the precision measurement of high alternating voltages´ and ´Calibration of uniform-field spark-gaps for high-voltage measurement at power frequencies´
248
The author´s reply to the discussion on ´The design of contactors with regard to their industrial application´
249
The author´s reply to the discussion on ´The design, testing and calibration of a combustible-gas detector´
250
The author´s reply to the discussion on ´The development of motor control-gear´
251
The author´s reply to the discussion on ´The development of polythene as a high-frequency dielectric´
252
The author´s reply to the discussion on ´The development of the gas-cushion cable system for the highest voltages´
253
The author´s reply to the discussion on ´The economic rating of motors and transformers´ and ´The economic flux density in large supply transformers´
254
The author´s reply to the discussion on ´The economic utilization of electricity in Great Britain´
255
The author´s reply to the discussion on ´The effect of the National Grid on the operation and maintenance of secondary power stations´
256
The author´s reply to the discussion on ´The electric spark in air´
257
The author´s reply to the discussion on ´The electrical aspect of farm mechanization´
258
The author´s reply to the discussion on ´The electrical measurement of pressure and strain, with particular reference to the testing of circuit breakers´
259
The author´s reply to the discussion on ´The Electricity Supply (Meters) Act, 1936-its legal and technical implications´
260
The author´s reply to the discussion on ´The Electricity Supply (Meters) Act, 1936-its legal and technical implications´
261
The author´s reply to the discussion on ´The electrification of the Warsaw railway junction´
262
The author´s reply to the discussion on ´The fixing of confidence limits to measurements´
263
The author´s reply to the discussion on ´The future of pulverized-coal firing in Great Britain´ at a joint meeting of the Institution with the Institution of Mechanical Engineers, 19th December, 1946
264
The author´s reply to the discussion on ´The growing importance of plastics in the electrical industry´
265
The author´s reply to the discussion on ´The high-pressure mercury-vapour discharge and its applications´
266
The author´s reply to the discussions at Liverpool, Birmingham and Glasgow on "Wave guides in electrical communication"
267
The author´s reply to the discussions at London and Leeds on "The characteristics and performance in service of high-voltage porcelain insulators"
268
The author´s reply to the discussions at London, Liverpool and Manchester on "The electrical heating of buildings"
269
The author´s reply to the discussions at Newcastle and Manchester on "Voltage control of large alternators"
270
The author´s reply to the discussions at Newcastle, Manchester and Liverpool on "Outdoor bushings?their construction, testing and standardization"
271
The author´s reply to the discussions in London and Manchester on "Wave guides in electrical communication"
272
The author´s reply to the discussions on "33,000-volt cables with metal-sheathed cores, with special reference to the S.L. type" at London, Newcastle and Birmingham
273
The author´s reply to the discussions on "A survey of metering practice on the British grid system"
274
The author´s reply to the discussions on "A survey of metering practice on the British grid system"
275
The author´s reply to the discussions on "A survey of the problem of post-war television"
276
The author´s reply to the discussions on "A survey of the problem of post-war television"
277
The author´s reply to the discussions on "Air-blast circuit-breakers"
278
The author´s reply to the discussions on "An all-electric house" at London, Birmingham, Leeds and Manchester
279
The author´s reply to the discussions on "An all-electric house" at Newcastle, Glasgow, Edinburgh and Liverpool
280
The author´s reply to the discussions on "An analysis of the load on a modern electricity-supply system"
281
The author´s reply to the discussions on "Apparatus standards of telephonic transmission, and the technique of testing microphones and receivers" at London and Newcastle
282
The author´s reply to the discussions on "Apparatus standards of telephonic transmission, and the technique of testing microphones and receivers" at London and Newcastle
283
The author´s reply to the discussions on "Applications and construction of transformer on-load tap-changing gear" at London, Leeds and Manchester
284
The author´s reply to the discussions on "Automatic and semi-automatic mercury-vapour rectifier substations" at London, Leeds, Birmingham, Liverpool and Manchester
285
The author´s reply to the discussions on "Characteristics and control of rectifier-motor variable-speed drives"
286
The author´s reply to the discussions on "City distribution by solid low-voltage networks" at London, Newcastle, Birmingham and Leeds
287
The author´s reply to the discussions on "Coal for steam raising" and to the discussions before the Institution and at Birmingham
288
The author´s reply to the discussions on "Coil ignition systems" at London and Birmingham
289
The author´s reply to the discussions on "Commercial cooking by electricity" at London, Birmingham and Edinburgh
290
The author´s reply to the discussions on "Commercial development of electricity supply as a consumer-service"
291
The author´s reply to the discussions on "Continuous extrusion of lead cable-sheaths" at London and Leeds
292
The author´s reply to the discussions on "Control rooms and control equipment of the grid system"
293
The author´s reply to the discussions on "Coreless induction furnaces"
294
The author´s reply to the discussions on "Current summations with current transformers"
295
The author´s reply to the discussions on "Design and application of large solid-rotor asynchronous generators"
296
The author´s reply to the discussions on "Developments in machine telegraph systems and methods of operation"
297
The author´s reply to the discussions on "Dielectric problems in high-voltage cables" at London, Newcastle and Manchester
298
The author´s reply to the discussions on "Economics of high-voltage transmission by underground cables"
299
The author´s reply to the discussions on "Electric and Diesel-electric traction on the Netherlands Railways"
300
The author´s reply to the discussions on "Electric heating for merchant ships"
301
The author´s reply to the discussions on "Electric traction on the southern railway"
302
The author´s reply to the discussions on "Electric traction on the Southern Railway"
303
The author´s reply to the discussions on "Electric traction on the Southern Railway"
304
The author´s reply to the discussions on "Electrical aspects of overhead travelling cranes"
305
The author´s reply to the discussions on "Electrical aspects of overhead travelling cranes"
306
The author´s reply to the discussions on "Electrical control of dangerous machinery and processes"
307
The author´s reply to the discussions on "Electrical control of dangerous machinery and processes. Part 2: Electrically interlocked guards on machines"
308
The author´s reply to the discussions on "Electrical control of dangerous machinery and processes. Part 3: Remote and supervisory control"
309
The author´s reply to the discussions on "Electrical control of road traffic by vehicle actuation" at London, Leeds and Edinburgh
310
The author´s reply to the discussions on "Electrical developments in the U.S.S.R." at London, Liverpool, Manchester, Nottingham, Leeds, Edinburgh and Birmingham
311
The author´s reply to the discussions on "Electrical equipment of track on the underground railways of London" at London, Birmingham and Manchester
312
The author´s reply to the discussions on "Electrical weighing"
313
The author´s reply to the discussions on "Electrically manufactured steels"
314
The author´s reply to the discussions on "Electricity in coal mines: a retrospect and a forecast" at London, Nottingham, Newcastle, Manchester, Birmingham, Cardiff, Liverpool, Edinburgh and Leeds
315
The author´s reply to the discussions on "Electricity in mines" before the Institution and at Manchester, Newcastle, Birmingham, Nottingham and Liverpool
316
The author´s reply to the discussions on "Electricity in newspaper printing"
317
The author´s reply to the discussions on "Electricity in the cotton industry"
318
The author´s reply to the discussions on "Electromagnetic phenomena in high-voltage testing equipment" at London, Manchester and Newcastle
319
The author´s reply to the discussions on "Electrostatic precipitation of dust from boiler-plant flue gases"
320
The author´s reply to the discussions on "Empire telegraph communications"
321
The author´s reply to the discussions on "Enemy airborne radio equipment"
322
The author´s reply to the discussions on "Energy conversion in electronic devices"
323
The author´s reply to the discussions on "Engineering economics"
324
The author´s reply to the discussions on "Equipment and performance of steel-tank rectifier traction substations operating on the underground railways of the London Passenger Transport Board" at London, Newcastle, Birmingham, Manchester, Liverpool and Lou
325
The author´s reply to the discussions on "Excess-current protection by H.R.C. fuses on medium-voltage circuits"
326
The author´s reply to the discussions on "Excess-current protection by h.r.c. fuses on medium-voltage circuits"
327
The author´s reply to the discussions on "Fire precautions in major electrical stations" at London, Newcastle, Leeds, Manchester, Birmingham and Middlesbrough
328
The author´s reply to the discussions on "Frequency modulation"
329
The author´s reply to the discussions on "Grid metering" at London, Edinburgh and Birmingham
330
The author´s reply to the discussions on "High-power fusible cut-outs" at London, Manchester and Newcastle
331
The author´s reply to the discussions on "Hot-cathode thyratrons: practical studies of characteristics"
332
The author´s reply to the discussions on "Industrial research, with special reference to electrical engineering development" at London, Newcastle, Birmingham, Liverpool and Leeds
333
The author´s reply to the discussions on "Insulation stresses in transformers, with special reference to surges and electrostatic shielding"
334
The author´s reply to the discussions on "Ionization in cable dielectrics" at London, Loughborough, Newcastle, Manchester and Edinburgh
335
The author´s reply to the discussions on "Large electric baking ovens" at London, Birmingham and Newcastle
336
The author´s reply to the discussions on "Layout and rupturing capacity of protective devices in motor circuits" at London, Liverpool, Manchester, Belfast, Newcastle and Swindon
337
The author´s reply to the discussions on "Lightning surges on transmission lines in Ireland"
338
The author´s reply to the discussions on "Lightning" at Glasgow, Newcastle, Belfast, Manchester, Birmingham, Loughborough, Bristol and Middlesbrough
339
The author´s reply to the discussions on "Load dispatching and the reasons for it, with special reference to the British grid system"
340
The author´s reply to the discussions on "Load dispatching and the reasons for it, with special reference to the British grid system"
341
The author´s reply to the discussions on "Localization of faults in low-voltage cables, with special reference to factory technique"
342
The author´s reply to the discussions on "Main-line electrification throughout the world, with special reference to the Austrian Federal Railways" at London and Liverpool
343
The author´s reply to the discussions on "Maintenance of relays and associated equipment"
344
The author´s reply to the discussions on "Metal-clad switchgear, automatic protection, and remote control, with particular reference to developments during the last seven years" at London, Newcastle and Manchester
345
The author´s reply to the discussions on "Mineral-insulated metal-sheathed conductors"
346
The author´s reply to the discussions on "Modern boiler plant" at London, Manchester, Liverpool, Cardiff and Loughborough
347
The author´s reply to the discussions on "Modern communication systems" at London and Manchester
348
The author´s reply to the discussions on "Modern developments in railway signalling" at London, Leeds and Birmingham
349
The author´s reply to the discussions on "Modern factors affecting electricity costs and charges" at London, Leeds, Edinburgh, Birmingham and Newcastle
350
The author´s reply to the discussions on "Modern factors affecting electricity costs and charges" at Nottingham, Manchester and Bristol
351
The author´s reply to the discussions on "Modern submarine cable telephony and the use of submerged repeaters"
352
The author´s reply to the discussions on "New methods for locating cable faults, particularly on high-frequency cables"
353
The author´s reply to the discussions on "Notes on the 60,000-volt underground network of the Union d´?lectricit?" at London and Newcastle
354
The author´s reply to the discussions on "Operating experience with high-voltage alternators"
355
The author´s reply to the discussions on "Organization of a meter test department of a large supply undertaking, with special reference to the Electricity Supply (Meters) Act, 1936" at London and Manchester
356
The author´s reply to the discussions on "Overhead electric lines" at Cardiff, Liverpool, Glasgow and Nottingham
357
The author´s reply to the discussions on "Overhead line regulations"
358
The author´s reply to the discussions on "Overhead line regulations"
359
The author´s reply to the discussions on "Parasitic forces existing in induction watt-hour meters"
360
The author´s reply to the discussions on "Planning the future electricity meter"
361
The author´s reply to the discussions on "Power factor and tariff" at London, Manchester and Birmingham
362
The author´s reply to the discussions on "Power supply for generating station auxiliary services"
363
The author´s reply to the discussions on "Practice and progress in combustion of coal as applied to steam generation" at Birmingham and Derby
364
The author´s reply to the discussions on "Practice and progress in combustion of coal as applied to steam generation" at London, Edinburgh, Manchester and Newcastle
365
The author´s reply to the discussions on "Private plants and public supply tariffs" at London, Manchester, Newcastle and Liverpool
366
The author´s reply to the discussions on "Pulverized fuel and efficient steam generation"
367
The author´s reply to the discussions on "Railway electrification in Great Britain"
368
The author´s reply to the discussions on "Railway traction control-equipment on Suburban London Transport"
369
The author´s reply to the discussions on "Rationalization of colliery electrical equipment"
370
The author´s reply to the discussions on "Recent developments in turbo-generators" at London, Manchester and Birmingham
371
The author´s reply to the discussions on "Recent progress in power rectifiers and their applications" at London, Newcastle, Birmingham and Middlesbrough
372
The author´s reply to the discussions on "Recent progress in power rectifiers and their applications" at Loughborough, Liverpool and Leeds
373
The author´s reply to the discussions on "Recent progress in the design of the high-voltage overhead lines of the British grid system"
374
The author´s reply to the discussions on "Remote switching by superimposed currents"
375
The author´s reply to the discussions on "Resistance heating of mild-steel containers at power frequencies"
376
The author´s reply to the discussions on "Rural electrification" at London, Manchester, Leeds, Derby and Birmingham
377
The author´s reply to the discussions on "Safety in the use of portable and transportable electrical equipment in industry"
378
The author´s reply to the discussions on "Selection of transformers for use in distribution networks"
379
The author´s reply to the discussions on "Some aspects of heat pump operation in Great Britain"
380
The author´s reply to the discussions on "Some aspects of the electrical transmission of power by means of direct current at very high voltages" at London, Manchester, Birmingham, Newcastle, Glasgow, Swansea, Loughborough and Leeds
381
The author´s reply to the discussions on "Some considerations in the application of power rectifiers and convertors"
382
The author´s reply to the discussions on "Some data concerning railway electrification in Italy" at London, Birmingham, Manchester and Edinburgh
383
The author´s reply to the discussions on "Some electrical methods of measuring mechanical quantities"
384
The author´s reply to the discussions on "Some experience with a British a.c. network analyser"
385
The author´s reply to the discussions on "Some experience with a British a.c. network analyser"
386
The author´s reply to the discussions on "Some factors affecting the design of electric lighting installations for building interiors"
387
The author´s reply to the discussions on "Some notes on electrical installations in large chemical factories"
388
The author´s reply to the discussions on "Some notes on the design of h.v. transmission lines, with special reference to conditions in India and Pakistan"
389
The author´s reply to the discussions on "Some notes on transformer practice with reference to standardization"
390
The author´s reply to the discussions on "Some practical considerations in the design of automatic equipments for heavy traction substations" at London, Newcastle, Loughborough and Manchester
391
The author´s reply to the discussions on "Some projects favourable to direct-current transmission, and the role of the British electrical industry in relation thereto"
392
The author´s reply to the discussions on "Some recent advances in alternating-current measuring instruments" at London and Newcastle
393
The author´s reply to the discussions on "Some researches on the safe use of electricity in coal mines"
394
The author´s reply to the discussions on "Space heating by means of electrically warmed floors, as applied to surface-type air-raid shelters"
395
The author´s reply to the discussions on "Squirrel-cage induction motors" at London, Newcastle and Manchester
396
The author´s reply to the discussions on "Stability of large power systems" at Glasgow and Leeds
397
The author´s reply to the discussions on "Standardization and design of a.c. turbo-type generators"
398
The author´s reply to the discussions on "Standardization of power cables"
399
The author´s reply to the discussions on "Storage batteries in relation to modern supply of electric lighting and power" at London, Newcastle, Edinburgh, Birmingham, Manchester and Dundee
400
The author´s reply to the discussions on "Storage batteries: a review of their application"
401
The author´s reply to the discussions on "Street lighting"
402
The author´s reply to the discussions on "Street lighting"
403
The author´s reply to the discussions on "Street traffic signals, with particular reference to vehicle actuation" at London, Birmingham, Manchester, Belfast and Dublin
404
The author´s reply to the discussions on "Substations, with particular reference to Yorkshire practice"
405
The author´s reply to the discussions on "Superimposed control applications, with special reference to tariffs and load-levelling"
406
The author´s reply to the discussions on "The analysis of vibration problems"
407
The author´s reply to the discussions on "The application of a gas-cooled arc to current conversion, with special reference to the Marx-type rectifier" at Leeds and Newcastle
408
The author´s reply to the discussions on "The application of a gas-cooled arc to current conversion, with special reference to the Marx-type rectifier" at London and Manchester
409
The author´s reply to the discussions on "The application of electric heating to domestic hot-water supply system" at London, Gloucester, Manchester, Belfast, Newcastle, Birmingham and Leeds
410
The author´s reply to the discussions on "The application of irradiation in industry"
411
The author´s reply to the discussions on "The applications of electricity in warships"
412
The author´s reply to the discussions on "The applications of electricity in warships" at London, Newcastle and Birmingham
413
The author´s reply to the discussions on "The automatic control of lead-acid-battery charging equipment"
414
The author´s reply to the discussions on "The automatic control of lead-acid-battery charging equipment"
415
The author´s reply to the discussions on "The breaking performance of high-power switchgear and of a new form of quenched-arc switch" at London, Loughborough, Newcastle and Cardiff
416
The author´s reply to the discussions on "The change-over of low-tension distribution systems from direct current to alternating current" at London, Birmingham and Manchester
417
The author´s reply to the discussions on "The continental development of single-anode mercury-arc-rectifier valves of high power"
418
The author´s reply to the discussions on "The continental development of single-anode mercury-arc-rectifier valves of high power"
419
The author´s reply to the discussions on "The cooling of electrical machines" at London and Newcastle
420
The author´s reply to the discussions on "The cooling of electrical machines" at Manchester, Leeds, Birmingham, Glasow, Liverpool and Cardiff
421
The author´s reply to the discussions on "The cost and efficiency of earthing on low- and medium-voltage overhead line systems"
422
The author´s reply to the discussions on "The design and installation of electrical accessories for domestic purposes"
423
The author´s reply to the discussions on "The design and operation of Hams Hall power station" at London, Birmingham and Newcastle
424
The author´s reply to the discussions on "The design of a high-fidelity disc recording equipment"
425
The author´s reply to the discussions on "The design of apparatus for the protection of alternating-current circuits"
426
The author´s reply to the discussions on "The design of contactors with regard to their industrial application"
427
The author´s reply to the discussions on "The design of electrical plant, control gear and connections for protection against shock, fire and faults" before the Institution and at Birmingham and Manchester
428
The author´s reply to the discussions on "The design of fractional horse-power induction motors" at London and Birmingham
429
The author´s reply to the discussions on "The development and design of electrical control gear for machine tools"
430
The author´s reply to the discussions on "The development of motor control-gear"
431
The author´s reply to the discussions on "The development of the electrical system on the Bristol Brabazon I Mark I Aircraft"
432
The author´s reply to the discussions on "The development of the gas-cushion cable system for the highest voltages"
433
The author´s reply to the discussions on "The development of the gas-cushion cable system for the highest voltages"
434
The author´s reply to the discussions on "The economic flux density in large supply transformers"
435
The author´s reply to the discussions on "The economic problems of the Swedish State Railway electrification" at London, Newcastle and Manchester
436
The author´s reply to the discussions on "The economic utilization of electricity in Great Britain"
437
The author´s reply to the discussions on "The economic utilization of modern permanent magnets"
438
The author´s reply to the discussions on "The economics of low-voltage electricity supplies to new housing estates"
439
The author´s reply to the discussions on "The effect of legislation and regulations upon electricity distribution" at Manchester, Liverpool, Edinburgh, Birmingham and Derby
440
The author´s reply to the discussions on "The effects of impulse voltages on transformer windings" at Middlesbrough and Newcastle
441
The author´s reply to the discussions on "The efficient rating and disposition of supply apparatus on high-voltage urban systems" at London, Glasgow and Liverpool
442
The author´s reply to the discussions on "The electric supply system in Berlin" at Gloucester and Plymouth
443
The author´s reply to the discussions on "The electrical aspect of farm mechanization"
444
The author´s reply to the discussions on "The electrical equipment of the Toronto subway cars"
445
The author´s reply to the discussions on "The electrical equipment of X-ray apparatus" at London and Glasgow
446
The author´s reply to the discussions on "The electrical heating of buildings" at Newcastle, Leeds, Birmingham, Glasgow, Bristol and Loughborough
447
The author´s reply to the discussions on "The electrical high-pressure testing of cables and the localization of faults"
448
The author´s reply to the discussions on "The electrification of the Manchester, south junction and Altrincham Railway" at London, Birmingham and Manchester
449
The author´s reply to the discussions on "The electrification of the Pietermaritzburg-Glencoe section of the South African Railways" at London, Birmingham and Newcastle
450
The author´s reply to the discussions on "The electrification of the Pietermaritzburg-Glencoe section of the South African Railways" at Manchester and Edinburgh
451
The author´s reply to the discussions on "The engineer administrator" at London and Manchester
452
The author´s reply to the discussions on "The engineer administrator" at Loughborough and Cheltenham
453
The author´s reply to the discussions on "The engineer: his due and his duty in life" at Dundee and Cardiff
454
The author´s reply to the discussions on "The generation of electricity in the London area"
455
The author´s reply to the discussions on "The growing importance of plastics in the electrical industry"
456
The author´s reply to the discussions on "The growth of electrical measurement from its commencement" at Edinburgh, Liverpool and Cheltenham
457
The author´s reply to the discussions on "The high-rupturing-capacity cartridge fuse, with special reference to short-circuit performance" at Leeds, Swansea, Cardiff, Liverpool and Derby
458
The author´s reply to the discussions on "The high-rupturing-capacity cartridge fuse, with special reference to short-circuit performance" at London, Birmingham and Newcastle
459
The author´s reply to the discussions on "The influence of maintenance requirements on the design of electrical installation equipment"
460
The author´s reply to the discussions on "The influence of the Benson boiler on the development of power stations" at London, Newcastle and Manchester
461
The author´s reply to the discussions on "The jet-wave rectifier: the experimental and theoretical basis of its design"
462
The author´s reply to the discussions on "The jointing and terminating of high-voltage cables" at London, Liverpool and Newcastle
463
The author´s reply to the discussions on "The Kemano hydro-electric development and associated Kitimat aluminium-reduction works"
464
The author´s reply to the discussions on "The lighting load: its characteristics and development" at London and Derby
465
The author´s reply to the discussions on "The lightning protection of high-voltage overhead transmission and distribution systems"
466
The author´s reply to the discussions on "The lightning strength of power transformers"
467
The author´s reply to the discussions on "The lower-voltage sections of the British grid system"
468
The author´s reply to the discussions on "The lower-voltage sections of the British grid system" at Swansea and Gloucester
469
The author´s reply to the discussions on "The measurement of earth-loop resistance"
470
The author´s reply to the discussions on "The measurement of light and colour"
471
The author´s reply to the discussions on "The measurement of light and colour"
472
The author´s reply to the discussions on "The mechanism of the long spark" at London, Manchester and Edinburgh
473
The author´s reply to the discussions on "The medical and surgical applications of electricity" at London and Birmingham
474
The author´s reply to the discussions on "The metering of mercury-arc rectifier supplies and outputs" at London and Manchester
475
The author´s reply to the discussions on "The modern use of pulverized fuel in power stations" at Manchester and Birmingham
476
The author´s reply to the discussions on "The moving-coil voltage regulator" at London, Glasgow, Leeds and Middlesbrough
477
The author´s reply to the discussions on "The operational characteristics of modern h.v. wood-pole lines"
478
The author´s reply to the discussions on "The optional-control system of domestic electricity supply" and "The control of the domestic load"
479
The author´s reply to the discussions on "The organization of electricity supply in New Zealand" at London and Manchester
480
The author´s reply to the discussions on "The organization of industrial electrical maintenance"
481
The author´s reply to the discussions on "The performance of the British grid system in thunderstorms"
482
The author´s reply to the discussions on "The performance of the British grid system in thunderstorms"
483
The author´s reply to the discussions on "The planning of an electricity board´s distribution system"
484
The author´s reply to the discussions on "The Post Office and automatic telephones" before the Institution and at Manchester, Newcastle and Birmingham
485
The author´s reply to the discussions on "The present practical limits of power station efficiency" at London, Edinburgh, Leeds, Newcastle, Manchester and Birmingham
486
The author´s reply to the discussions on "The protection of high-voltage insulators from power-arc damage"
487
The author´s reply to the discussions on "The relative fuel economy of electricity, gas, oil, and solid fuel, as heating agents" at London, Manchester, Newcastle, Edinburgh, Birmingham and Liverpool
488
The author´s reply to the discussions on "The solution of transmission-line problems by use of the circle diagram of impedance"
489
The author´s reply to the discussions on "The stability characteristics of alternators and of large interconnected systems" at London, Manchester and Newcastle
490
The author´s reply to the discussions on "The teaching of the principles of electrical machine design"
491
The author´s reply to the discussions on "The teaching of the principles of electrical machine design"
492
The author´s reply to the discussions on "The testing of porcelain insulators" at London and Newcastle
493
The author´s reply to the discussions on "The testing, reconditioning and servicing of domestic appliances"
494
The author´s reply to the discussions on "The trend of design of electric locomotives"
495
The author´s reply to the discussions on "The trend of design of electric locomotives" at Derby and Liverpool
496
The author´s reply to the discussions on "The trolleybus"
497
The author´s reply to the discussions on "The university education and industrial training of engineers, with particular reference to telecommunications"
498
The author´s reply to the discussions on "The use of electricity in the production of calcium carbide"
499
The author´s reply to the discussions on "The use of protective multiple earthing and earth-leakage circuit-breakers in rural areas" at Leeds and Newcastle
500
The author´s reply to the discussions on "The uses of earthed signal conductors on transmission circuits"
501
The author´s reply to the discussions on "Theory of servo systems, with particular reference to stabilization"
502
The author´s reply to the discussions on "Thermal power plants for peak-load and emergency service" at London, Cardiff, Leeds, and Newcastle
503
The author´s reply to the discussions on "Three-wire direct-current distribution networks: Some comparisons in costs and operation" at London, Dublin, Birmingham, Manchester and Glasgow
504
The author´s reply to the discussions on "Tidal power and the Severn Barrage"
505
The author´s reply to the discussions on "Tidal power and the Severn Barrage"
506
The author´s reply to the discussions on "Tidal power and the Severn Barrage"
507
The author´s reply to the discussions on "Transients in electric mine-winders and their effects on rope stresses"
508
The author´s reply to the discussions on "Transmission and distribution of electricity to mines"
509
The author´s reply to the discussions on "Two transmission-line problems–suspension insulators for industrial areas in Great Britain; conductor vibration" at London, Newcastle and Manchester
510
The author´s reply to the discussions on "Variable-speed alternating-current motors without commutators" at London, Leeds, Birmingham and Newcastle
511
The author´s reply to the discussions on "Voice-frequency telegraphs" at London and Manchester
512
The author´s reply to the discussions on "Voltage control of large alternators" at London and Birmingham
513
The author´s reply to the discussions on "Waterworks power-plant practice: the comparative costs of steam-, Diesel- and electrically-operated machinery"
514
The author´s reply to the discussions on "Waterworks power-plant practice: the comparative costs of steam-, Diesel-, and electrically-operated machinery"
515
The author´s reply to the discussions on "Wire broadcasting investigations at audio and carrier frequencies"
516
The author´s reply to the discussions on "Wire broadcasting investigations at audio and carrier frequencies"
517
The author´s reply to the discussions on ?Some observations on oil deterioration in transformers and switchgear"
518
The author´s reply to the discussions on ´The dynamic braking of induction motors"
519
The author´s reply to the discussions on ´Three-phase distribution and electric welding and furnace loads"
520
The author´s reply to the disscussion on "Electronic telephone exchanges"
521
The author´s reply to the general discussion on "High-voltage distribution in rural areas" and to the discussion before the Northern Ireland Sub-Centre
522
The author´s reply to the general discussion on "Operating experience with high-voltage alternators" and to the discussions at Liverpool and Newcastle
523
The author´s reply to the general discussion on "Outdoor bushings" Their construction, testing and standardization?
524
The author´s reply to the general discussion on "Standardization of distribution in densely loaded areas"
525
The author´s reply to the general discussion on "The control of the domestic load" and to the discussions at Bristol and Leeds
526
The author´s reply to the written communication and to the discussion on "Statistical methods and factors of safety: an argument for the revision of existing standards" before the Mersey and North Wales (Liverpool) Centre
527
The authoring and delivery challenges for industrial strength hypermedia
528
The authority structure of agri-food supply chain
529
The authority structure problem of computer supported collaborative concept mapping system for elementary students
530
The authorization service in dynamic trust domains
531
The Authorization Service of Tivoli Policy Director
532
The authors
533
The authors
534
The authors
535
The authors
536
The authors
537
The authors
538
The authors
539
The authors
540
The authors´ replies to the discussion on "A digital computer store with very short read time", "A parallel arithmetic unit using a saturated-transistor fast-carry circuit", and "Ferrite-core memory systems with rapid cycle times"
541
The authors´ replies to the discussion on "A ferrometer for the determination of the a.c. magnetization curve and the iron losses of small ferromagnetic sheet samples", "Direct-reading iron-loss testing equipment for single sheets, single strips and test
542
The authors´ replies to the discussion on "A general method of digital network analysis particularly suitable for use with low-speed computers" and "Digital computers in power system analysis"
543
The authors´ replies to the discussion on "A method of measuring and displaying generator rotor angle", "Generator rotor angle measurement by stroboscopic means" and "Power-system phase-angle measurements"
544
The authors´ replies to the discussion on "A quadrature network for generating vestigial-sideband signals", "Rectifier modulators with frequency-selective terminations" and "The input impedance of rectifier modulators"
545
The authors´ replies to the discussion on "A review of some television pick-up tubes" and "The design of a television camera channel for use with the C.P.S. Emitron"
546
The authors´ replies to the discussion on "A simple investigation of the cross-modulation distortion arising from the pulling effect in a frequency-modulated klystron", "Theory and behaviour of helix structures for a high-power pulsed travelling-wave tube
547
The authors´ replies to the discussion on "A study of commercial time lost on transatlantic radio circuits due to disturbed ionospheric conditions" and "Performance characteristics of high-frequency radiotelegraph circuits"
548
The authors´ replies to the discussion on "A study of ionospheric propagation by means of ground back-scatter", "The technique of ionospheric investigation using ground back-scatter", "An experiment to test the reciprocal radio transmission conditions ove
549
The authors´ replies to the discussion on "A v.h.f. field-strength survey on 90 Mc/s" and "The propagation of metre radio waves beyond the normal horizon"
550
The authors´ replies to the discussion on "Aircraft electrical systems"
551
The authors´ replies to the discussion on "Airfield and harbour approach"
552
The authors´ replies to the discussion on "An accurate electroluminescent graphical-output unit for a digital computer"
553
The authors´ replies to the discussion on "An analogue computer for use in the design of servo systems" and "The design and testing of an electronic simulator for a hydraulic remote-position-control servo mechanism"
554
The authors´ replies to the discussion on "An electrical resistance test for insulating oils"
555
The authors´ replies to the discussion on "An electrostatic particle accelerator" and "An electrostatic analyser for the absolute measurement of proton energies and the establishment of fixed points on the high-voltage scale"
556
The authors´ replies to the discussion on "An objective noise-meter for the measurement of moderate and loud, steady and impulsive noises" and "The circuit noise-meter (psophometer) and its applications"
557
The authors´ replies to the discussion on "Applications in the military sphere"
558
The authors´ replies to the discussion on "Aspects of possible systems"
559
The authors´ replies to the discussion on "Automatic setting of the flexible walls of a large wind tunnel"
560
The authors´ replies to the discussion on "Auto-self-excited transductors and push-pull circuit theory" and "Composite cores for instrument transductors"
561
The authors´ replies to the discussion on "Broadcasting stations"
562
The authors´ replies to the discussion on "Business applications of digital computers"
563
The authors´ replies to the discussion on "C.W. navigational aids"
564
The authors´ replies to the discussion on "Capacitor voltage transformers", by Messrs. Wellings, Mortlock and Mathews, and "A thyratron stroboscope"
565
The authors´ replies to the discussion on "Carrier-frequency applications"
566
The authors´ replies to the discussion on "Chemical and physical properties and preparation"
567
The authors´ replies to the discussion on "Circuit techniques and components of computers"
568
The authors´ replies to the discussion on "Classification, specification and testing of insulating materials"
569
The authors´ replies to the discussion on "Comparison of argon, krypton and xenon as admixtures in neon glow-discharge reference tubes", "The corona discharge and its application to voltage stabilization" and "Impedance/frequency characteristics of glow-d
570
The authors´ replies to the discussion on "Construction and performance of commercially available computers-II"
571
The authors´ replies to the discussion on "Construction and performance of experimental computers"
572
The authors´ replies to the discussion on "Construction"
573
The authors´ replies to the discussion on "Control and auxiliary equipment"
574
The authors´ replies to the discussion on "Control of hydro-electric plant"
575
The authors´ replies to the discussion on "Copper-oxide rectifiers in ammeters and voltmeters" and "A direct-reading form factor meter"
576
The authors´ replies to the discussion on "Dekatrons and electro-mechanical registers operated by transistors", "Some aspects of half-wave magnetic amplifiers", "Some transistor input stages for high-gain d.c. amplifiers" and "A transistor high-gain chopp
577
The authors´ replies to the discussion on "Design and maintenance of stock"
578
The authors´ replies to the discussion on "Determination of the static and dynamic elastic properties of resilient materials", "A method of using microwaves for measuring small displacements, and a torque-meter using this principle" and "Magnetic measurem
579
The authors´ replies to the discussion on "Development of locators of small metallic bodies buried in the ground"
580
The authors´ replies to the discussion on "Direct-current and low-frequency properties"
581
The authors´ replies to the discussion on "Direction-finding"
582
The authors´ replies to the discussion on "Diversity reception and automatic phase correction" and "A diversity combiner giving total power transfer"
583
The authors´ replies to the discussion on "Double-ratio a.c. bridges with inductively-coupled ratio arms" and "A direct-capacitance aircraft altimeter"
584
The authors´ replies to the discussion on "Double-ratio a.c. bridges with inductively-coupled ratio arms" and "A direct-capacitance aircraft altimeter"
585
The authors´ replies to the discussion on "Electric strength and breakdown mechanisms"
586
The authors´ replies to the discussion on "Electrical equipment of battery road vehicles" and "The economic basis of battery electric road vehicle operation and manufacture"
587
The authors´ replies to the discussion on "Engineering and scientific applications of digital computers"
588
The authors´ replies to the discussion on "Errors in direction-finding calibrations in steel ships due to the shape and orientation of the aerial of the transmitting station" and "A radio compass developed in H.M. Signal School"
589
The authors´ replies to the discussion on "Excess-current protection by over-current relays on medium-voltage circuits"
590
The authors´ replies to the discussion on "Flight information processing"
591
The authors´ replies to the discussion on "General properties and stability of insulation: current problems in insulation design for high frequencies and lower frequencies"
592
The authors´ replies to the discussion on "General survey of stereophonic sound"
593
The authors´ replies to the discussion on "General system aspects"
594
The authors´ replies to the discussion on "Grounded-grid amplifier valves for very short waves" and "Triodes for very short waves-oscillators"
595
The authors´ replies to the discussion on "Ground-wave propagation over an inhomogeneous smooth earth. Part 2: Experimental evidence and practical implications"
596
The authors´ replies to the discussion on "High-voltage steel-tank mercury-arc rectifier equipments for radio transmitters" and "The application of high-voltage steel-tank mercury-arc rectifiers to broadcast transmitters"
597
The authors´ replies to the discussion on "Improvements in the precision measurement of capacitance", "The design of an audio-frequency amplifier for high-precision voltage measurement", "The design and performance of high-precision audio-frequency curren
598
The authors´ replies to the discussion on "Industrial applications. Part II"
599
The authors´ replies to the discussion on "Industrial television"
600
The authors´ replies to the discussion on "Inhibited transformer oil" and "The stability of oil in transformers"
601
The authors´ replies to the discussion on "Insulation properties of compressed electronegative gases" and "The electric strength of highly compressed gases"
602
The authors´ replies to the discussion on "Ionospheric forward-scatter propagation"
603
The authors´ replies to the discussion on "Iron losses at high magnetic flux densities in electrical sheet steels" and "An improved precision permeameter"
604
The authors´ replies to the discussion on "Junction-transistor bootstrap linear-sweep circuits", "Design considerations of junction-transistor oscillators for the conversion of power from direct to alternating current" and "Minority-carrier storage in sem
605
The authors´ replies to the discussion on "Logical design"
606
The authors´ replies to the discussion on "Long feeders for transmitting wide side-bands, with reference to the Alexandra Palace aerial-feeder system" and "E.M.I. cathode-ray television transmission tubes"
607
The authors´ replies to the discussion on "Long feeders for transmitting wide side-bands, with reference to the Alexandra Palace aerial-feeder system" and "E.M.I. cathode-ray television transmission tubes"
608
The authors´ replies to the discussion on "Low-temperature carbonization of fuel, with special reference to its combination with the production of electricity"
609
The authors´ replies to the discussion on "Low-temperature carbonization of fuel, with special reference to its combination with the production of electricity" at Liverpool
610
The authors´ replies to the discussion on "Machine equipment"
611
The authors´ replies to the discussion on "Magnetic amplifiers" and "A theoretical and experimental study of the series-connected magnetic amplifier"
612
The authors´ replies to the discussion on "Magnetic amplifiers" and "A theoretical and experimental study of the series-connected magnetic amplifier"
613
The authors´ replies to the discussion on "Magnetic spectra"
614
The authors´ replies to the discussion on "Magnetic tape: input, output and auxiliary storage"
615
The authors´ replies to the discussion on "Marine and ground radar"
616
The authors´ replies to the discussion on "Measurement techniques"
617
The authors´ replies to the discussion on "Measurements of junction-transistor noise in the frequency range 7-50 kc/s", "A germanium diffused-junction photo-electric cell", "Transistor power amplifiers", "Transistor d.c. convertors" and "Noise in silicon
618
The authors´ replies to the discussion on "Medium- and long-range aids"
619
The authors´ replies to the discussion on "Microwave apparatus-I"
620
The authors´ replies to the discussion on "Microwave measurements and properties"
621
The authors´ replies to the discussion on "Microwave theory and measurements"
622
The authors´ replies to the discussion on "Military and aeronautical communication"
623
The authors´ replies to the discussion on "New materials"
624
The authors´ replies to the discussion on "New principles in electrical instruments" and "A survey of modern methods of presentation of instrument readings and recordings"
625
The authors´ replies to the discussion on "Numerical analysis I"
626
The authors´ replies to the discussion on "Operating experience with a transistor digital computer" and "A new high-speed digital technique for computer use"
627
The authors´ replies to the discussion on "Permittivity and dielectric losses in liquids"
628
The authors´ replies to the discussion on "Permittivity and dielectric losses in solids"
629
The authors´ replies to the discussion on "Physical properties and impulse strength of paper", "The impulse strength of lapped impregnated paper dielectric" and "Breakdown under impulse voltages of solid and liquid dielectrics in combination"
630
The authors´ replies to the discussion on "Point-to-point transmission"
631
The authors´ replies to the discussion on "Power system automatic frequency control techniques" and "Power/frequency characteristics of the British grid system"
632
The authors´ replies to the discussion on "Programme origination"
633
The authors´ replies to the discussion on "Propagation"
634
The authors´ replies to the discussion on "Propagation"
635
The authors´ replies to the discussion on "Propagation"
636
The authors´ replies to the discussion on "Protective systems. Part I: Protective systems for rural distribution up to 33 kV"
637
The authors´ replies to the discussion on "Radar data handling"
638
The authors´ replies to the discussion on "Radiation measuring instruments for the infra-red to ultra-violet waveband" and "Instruments for use in the microwave band"
639
The authors´ replies to the discussion on "Radio and television applications"
640
The authors´ replies to the discussion on "Radio components"
641
The authors´ replies to the discussion on "Radio noise"
642
The authors´ replies to the discussion on "Radio physics"
643
The authors´ replies to the discussion on "Range and bearing systems"
644
The authors´ replies to the discussion on "Rapid-access storage, including the use of magnetic cores for storage and switching"
645
The authors´ replies to the discussion on "Receiving equipment: cathode-ray tubes and valves"
646
The authors´ replies to the discussion on "Receiving equipment: circuit techniques"
647
The authors´ replies to the discussion on "Recent advances in cathode-ray-tube storage"
648
The authors´ replies to the discussion on "Recent progress in the design of the high-voltage overhead lines of the British grid system" and "Cable terminations"
649
The authors´ replies to the discussion on "Review of electric railway traction"
650
The authors´ replies to the discussion on "Rotating-loop radio transmitters, and their application to direction-finding and navigation", "Some experiments on the applications of the rotating-beacon transmitter to marine navigation" and "A theoretical disc
651
The authors´ replies to the discussion on "Some comments on the classification of waveguide modes" and "Some comments on quasi-optical methods at millimetre wavelengths"
652
The authors´ replies to the discussion on "Some considerations relating to the totally electrified cane-sugar factory" and "Electricity in a beet-sugar factory"
653
The authors´ replies to the discussion on "Some developments in commercial point-to-point radiotelegraphy" and "Carrier-frequency-sheet telegraphy"
654
The authors´ replies to the discussion on "Some naval applications"
655
The authors´ replies to the discussion on "Some special characteristics of soft magnetic materials used in instrument manufacture", "The properties of insulating materials used in instruments" and "Components for instruments"
656
The authors´ replies to the discussion on "Special microwave equipment"
657
The authors´ replies to the discussion on "Square-loop applications-I"
658
The authors´ replies to the discussion on "Square-loop applications-II"
659
The authors´ replies to the discussion on "Square-loop materials"
660
The authors´ replies to the discussion on "Standardization of control facilities for the British grid: communications, indications and telemetering" and "The development of communication, indication and telemetering equipment for the British grid"
661
The authors´ replies to the discussion on "Standards and measurements"
662
The authors´ replies to the discussion on "Stereophonic broadcasting"
663
The authors´ replies to the discussion on "Stereophonic gramophone records (systems and recording)"
664
The authors´ replies to the discussion on "supervisory equipment for the indication of shaft distortion in steam turbines" and "the electrical measurement of steam-turbine rotor movements, with special reference to the operation and design of modern power
665
The authors´ replies to the discussion on "System equipment"
666
The authors´ replies to the discussion on "Tape and film stereophony"
667
The authors´ replies to the discussion on "Tariffs for domestic and business premises" and "The prices for electric supply"
668
The authors´ replies to the discussion on "telegraph codes and code convertors" and "code convertors for the interconnection of morse and teleprinter systems"
669
The authors´ replies to the discussion on "temperature rises in electrical machines as related to the properties of thermal networks", "temperature rises in electrical machines on variable load and with variable speed" and "performance and heating curves
670
The authors´ replies to the discussion on "The accuracy of measurement of electrical standards" and "Performance limits in electrical instruments"
671
The authors´ replies to the discussion on "The accurate mapping of electric fields in an electrolytic tank"
672
The authors´ replies to the discussion on "The application of digital computers in industrial control"
673
The authors´ replies to the discussion on "The application of digital computers to nuclear-reactor design", "Temperature transients in gas-cooled thermal nuclear reactors", "The design, performance and use of fission counters" and "Boron trifluoride propo
674
The authors´ replies to the discussion on "The application of transistors to line communication equipment" and "The application of junction transistors to audio-frequency telephone line amplifiers"
675
The authors´ replies to the discussion on "The applications of machinery at the coal face", "The design of storage-battery locomotives for use in coal mines", and "Electricity in mines: a short survey"
676
The authors´ replies to the discussion on "the automatic compensation of zero-drift errors in direct-coupled feedback systems", "high-gain d.c. amplifiers" and "the design of a practical d.c. amplifier based on the second-harmonic type of magnetic modulat
677
The authors´ replies to the discussion on "The automatic solution of power-system swing-curve equations", "Electronic-analogue-computer study of synchronous-machine transient stability" and "Dynamic operation of an a.c. network analyser"
678
The authors´ replies to the discussion on "the b.b.c. sound broadcasting service on very high frequencies", "frequency-modulated v.h.f. transmitter technique, with particular reference to the b.b.c. united kingdom service" and "frequency-modulated quartz
679
The authors´ replies to the discussion on "The breakdown mechanism of impregnated paper cables" and "The breakdown of cables by thermal instability"
680
The authors´ replies to the discussion on "The breakdown mechanism of impregnated paper cables" and "The breakdown of cables by thermal instability" at Liverpool
681
The authors´ replies to the discussion on "The cavity magnetron", "The high-power pulsed magnetron: a review of early developments" and "The high-power pulsed magnetron: development and design for radar applications"
682
The authors´ replies to the discussion on "The construction and operation of a simple neon-tube high-tension crest voltmeter", "Sphere-gap calibration", and "The measurement of high voltages, with special reference to the measurement of peak voltages"
683
The authors´ replies to the discussion on "The control of a thermal neutron reactor", "Automatic control characteristics of thermal neutron reactors" and "Neutron detectors for reactor instrumentation"
684
The authors´ replies to the discussion on "the crystal palace television transmitting station", "the broadcasting house-crystal palace television link" and "band i television-transmitter design, with particular reference to the transmitters at crystal pal
685
The authors´ replies to the discussion on "The design and operation of a 30-MeV synchrotron" and "The design of electron synchrotrons"
686
The authors´ replies to the discussion on "The design of housing-estate distribution systems using a digital computer" and "The logical design of electrical networks using linear programming methods"
687
The authors´ replies to the discussion on "The design of semi-conductor wattmeters for power-frequency and audio-frequency applications" and "Audio-frequency power measurements by dynamometer wattmeters"
688
The authors´ replies to the discussion on "The determination of time and frequency" and "Frequency standardization"
689
The authors´ replies to the discussion on "The economic selection of cooling towers for generating stations" and "The application of friction/heat-transfer correlations to cooling-tower design" before the Supply Section, 5th January, 1955
690
The authors´ replies to the discussion on "The effect of friction on the behaviour of servo mechanisms at creep speeds"
691
The authors´ replies to the discussion on "The extinction of arcs in air-blast circuit-breakers" and "The performance of high-voltage oil circuit-breakers incorporating resistance switching"
692
The authors´ replies to the discussion on "The fundamental limitations of the second-harmonic type of magnetic modulator as applied to the amplification of small d.c. signals" and "A new theory of the magnetic amplifier"
693
The authors´ replies to the discussion on "The Holweck demountable type valve", "Silica valves in wireless telegraphy" and "Cooled-anode valves, and lives of transmitting valves"
694
The authors´ replies to the discussion on "The Holweck demountable type valve", "Silica valves in wireless telegraphy" and "Cooled-anode valves, and lives of transmitting valves"
695
The authors´ replies to the discussion on "The indirectly heated thermistor as a precise a.c.-d.c. transfer device" and "A bridge for the measurement of permittivity"
696
The authors´ replies to the discussion on "The London television service" and "The Marconi-E.M.I. television system"
697
The authors´ replies to the discussion on "The magnetic field of a ship and its neutralization by coil degaussing" and "The electrical engineering aspect of degaussing" before the Scottish Centre
698
The authors´ replies to the discussion on "The minimum-moment-of-error-squared criterion: a new performance criterion for servo mechanisms" and "The behaviour of a remote-position-control servo mechanism with hard-spring non-linear characteristics"
699
The authors´ replies to the discussion on "The recurrent-surge oscillograph and its application to the study of surge phenomena in transformers" and "An oscillograph for the automatic recording of disturbances on electric supply systems"
700
The authors´ replies to the discussion on "The relative merits of presentation of bearings by aural-null and twin-channel cathode-ray direction-finders" and "Some experiments on the accuracy of bearings taken on an aural-null direction-finder"
701
The authors´ replies to the discussion on "The selenium rectifier photocell: manufacture, properties, and use in photometry" and "The selenium rectifier photo-electric cell: its characteristics and response to intermittent illumination"
702
The authors´ replies to the discussion on "The standard frequency monitor at the National Physical Laboratory", "Standard frequency transmission equipment at Rugby Radio Station" and "Standard frequency transmissions"
703
The authors´ replies to the discussion on "The theoretical and practical sensitivities of gas-focused cathode-ray oscillographs, and the effects of the gas on their performance" and "A cathode-ray oscillograph equipment embodying a high-voltage, gas-fille
704
The authors´ replies to the discussion on "The theory and characteristics of the 3:1 pole-changing induction motor", "Applications of the 3:1 pole-changing motor" and "The development of a new 3:1 pole-changing motor"
705
The authors´ replies to the discussion on "The transistor as a computing element-I"
706
The authors´ replies to the discussion on "The transmission of pictures by radio", "A photo-telegraph transmitter-receiver utilizing sub-carrier frequency modulation" and "Some recent developments in photo-telegraphy and facsimile transmission"
707
The authors´ replies to the discussion on "The use of the high-vacuum cathode-ray tube for recording high-speed transient phenomena" and "Recurrent-surge oscillographs, and their application to short-time transient phenomena"
708
The authors´ replies to the discussion on "Theory and performance of corner reflectors for aerials" and "The measured performance of horizontal dipole transmitting arrays"
709
The authors´ replies to the discussion on "Theory and performance"
710
The authors´ replies to the discussion on "Theory of the travelling-wave parametric amplifier", "Saturation effects in a travelling-wave parametric amplifier", and "The gain of travelling-wave ferromagnetic amplifiers"
711
The authors´ replies to the discussion on "Thermionic peak voltmeters for use at very high frequencies", "The theory and design of hot-wire ammeters for frequencies of 25 to 100 megacycles" and "An improved form of response-curve projection apparatus"
712
The authors´ replies to the discussion on "Thermionic peak voltmeters for use at very high frequencies", "The theory and design of hot-wire ammeters for frequencies of 25 to 100 megacycles" and "An improved form of response-curve projection apparatus"
713
The authors´ replies to the discussion on "Three-dimensional cathode-ray tube displays"
714
The authors´ replies to the discussion on "Tooth-ripple losses in unwound pole-shoes" and "Parasitic losses in synchronous-machine damper windings"
715
The authors´ replies to the discussion on "Trophospheric propagation beyond the horizon-II"
716
The authors´ replies to the discussion on "Tropospheric propagation beyond the horizon-I"
717
The authors´ replies to the discussion on "Two electronic resistance or conductance meters" and "A bridge for the measurement of the dielectric constants of gases"
718
The authors´ replies to the discussion on on "Electricity in aircraft"
719
The authors´ replies to the discussion on on "Electronic servo systems"
720
The authors´ replies to the discussion on Session I
721
The authors´ replies to the discussion on Session I
722
The authors´ replies to the discussion on Session I
723
The authors´ replies to the discussion on Session II
724
The authors´ replies to the discussion on Session II
725
The authors´ replies to the discussion on Session II
726
The authors´ replies to the discussion on Session III
727
The authors´ replies to the discussion on Session IV
728
The authors´ replies to the discussion on six papers on radiotelegraphy and fading
729
The authors´ replies to the discussion on the "Symposium of papers on microwave links"
730
The authors´ replies to the discussion on the "Symposium of papers on the Sutton Coldfield television station"
731
The authors´ replies to the discussion on the Banana Tube
732
The authors´ replies to the discussion on the ionospheric absorption and reflection of radio waves
733
The authors´ replies to the discussion on the papers "Errors in direction-finding calibrations in steel ships due to the shape and orientation of the aerial of the transmitting station? and ?A radio compass developed in H.M. Signal School"
734
The authors´ replies to the discussion on the papers "Rotating-loop radio transmitters, and their application to direction-finding and navigation", "Some experiments on the application of the rotating-beacon transmitter to marine navigation", and "A theor
735
The authors´ replies to the discussion on the papers "The London Television Service" and "The Marconi-E.M.I. television system" before the Institution
736
The authors´ replies to the discussion on the Symposium of papers on "Insulating oils"
737
The authors´ replies to the discussion on their papers "Recent developments in cathode-ray oscillographs" by Dr. Wood, and "Accuracy of measurements made with hot-filament cathode-ray tubes of the gas-focused type"
738
The authors´ replies to the discussions at London, Newcastle, Manchester and Glasgow
739
The authors´ replies to the discussions on "A versatile transistor circuit", "The measurement of the small-signal characteristics of transistors", "A bridge for measuring the a.c. parameters of point-contact transistors" and "The transistor regenerative a
740
The authors´ replies to the discussions on "Crystal diodes" and "Crystal triodes"
741
The authors´ replies to the discussions on "Design data in rural distribution lines" and "A review of recent developments in rural electrification"
742
The authors´ replies to the discussions on "Development of transportable thermal-storage space heaters" and "Electrical floor warming"
743
The authors´ replies to the discussions on "Electrical insulating papers for the manufacture of power cables" and "The prevention of ionization in impregnated paper dielectrics" at London and Manchester
744
The authors´ replies to the discussions on "Excess-current protection by h.r.c. fuses on medium-voltage circuits" and "Excess-current protection by over-current relays on medium-voltage circuits"
745
The authors´ replies to the discussions on "Heavy-duty rectifiers and their application to traction substations" at London, Bristol, Newcastle, Birmingham and Manchester
746
The authors´ replies to the discussions on "Illuminating engineering" and "The problems of public lighting by electricity" at London, Manchester, Birmingham and Liverpool
747
The authors´ replies to the discussions on "Inhibited transformer oil" and "The stability of oil in transformers"
748
The authors´ replies to the discussions on "Insulating oils for high-voltage cables" at London and Newcastle
749
The authors´ replies to the discussions on "Modern electric wiring, particularly as applied to small houses" and "The domestic applications of electricity"
750
The authors´ replies to the discussions on "Notes on the testing of static transformers" at London, Bristol, Newcastle and Manchester
751
The authors´ replies to the discussions on "Restriking voltage as a factor in the performance, rating and selection of circuit-breakers" and "The influence of resistance switching on the design of high-voltage air-blast circuit-breakers"
752
The authors´ replies to the discussions on "Restriking voltage as a factor in the performance, rating and selection of circuit-breakers" and "The influence of resistance switching on the design of high-voltage air-blast circuit-breakers"
753
The authors´ replies to the discussions on "The anticipation of demand, and the economic selection, provision and lay-out of plant" at London, Newcastle, Liverpool, Manchester and Birmingham
754
The authors´ replies to the discussions on "The control and instrumentation of a nuclear reactor", "The control of nuclear reactors", "Nuclear-reactor-control ionization chambers" and "Some design aspects of nuclear-reactor control mechanisms"
755
The authors´ replies to the discussions on "The cost and efficiency of earthing on low- and medium-voltage overhead line systems"
756
The authors´ replies to the discussions on "The design of domestic electric cookers" and "Electric cookers for domestic purposes, with special reference to maintenance costs" at Liverpool and Newport
757
The authors´ replies to the discussions on "The design of domestic electric cookers" and "Electric cookers for domestic purposes, with special reference to maintenance costs" at London, Birmingham, Newcastle, Leeds and Manchester
758
The authors´ replies to the discussions on "The development of a pre-stressed (´toughened´) glass insulator" and "The performance of glass insulators, and comparisons with porcelain"
759
The authors´ replies to the discussions on "The electrical ignition of mixtures of ether vapour, air, and oxygen" and "The risk of explosion due to electrification in operating theatres of hospitals"
760
The authors´ replies to the discussions on "The electrical protection of cold-cathode luminous discharge-tube installations" and "An electrostatic analyser for complex waves of small amplitude"
761
The authors´ replies to the discussions on "The future of the domestic wiring installation"
762
The authors´ replies to the discussions on "The heating of buildings electrically by means of thermal storage" and "The heat pump–an economical method of producing low-grade heat from electricity"
763
The authors´ replies to the discussions on "The influence of certain transmission-line associated apparatus on travelling waves" and "The design and operation of a high-speed cathode-ray oscillograph" at London, Liverpool, Newcastle and Dundee
764
The authors´ replies to the discussions on "The lightning discharge" and "The measurement of lightning voltages and currents in South Africa and Nigeria–1935 to 1937"
765
The authors´ replies to the discussions on "The London television service" and "The Marconi-E.M.I. television system" at Liverpool and Birmingham
766
The authors´ replies to the discussions on "The London television service" and "The Marconi-E.M.I. television system" at Liverpool and Birmingham
767
The authors´ replies to the discussions on "The micro-gap switch" and "Restriking voltage, and its import in circuit-breaker operation" at London, Manchester and Newcastle
768
The authors´ replies to the discussions on "Towards the ´correct´ domestic multi-part tariff" and "General factors affecting the unification of electricity supply tariffs"
769
The authors´ replies to the discussions on the M.K.S. system of units before the Institution and the North-Western Centre
770
The authors´ replies to the general discussion
771
The authors´ reply to the above discussion on "Busbar protection: A critical review of methods and practice"
772
The authors´ reply to the above discussion on "The influence of rectifier harmonics in a railway system on the dielectric stability of 33-kV cables"
773
The authors´ reply to the discussion "The testing of communication-type radio receivers"
774
The authors´ reply to the discussion at the Microwave Introductory Session
775
The authors´ reply to the discussion on "275-kV developments on the British grid system"
776
The authors´ reply to the discussion on "A brushless variable-speed induction motor"
777
The authors´ reply to the discussion on "A cyclotron for medical research"
778
The authors´ reply to the discussion on "A deep electrolytic tank for the solution of 2- and 3-dimensional field problems in engineering"
779
The authors´ reply to the discussion on "A dynamic model for studying the behaviour of the overhead equipment used in electric railway traction"
780
The authors´ reply to the discussion on "A flying-spot film scanner for colour television"
781
The authors´ reply to the discussion on "A low-drift transistor chopper-type d.c. amplifier with high gain and large dynamic range"
782
The authors´ reply to the discussion on "A method of designing transistor trigger circuits´
783
The authors´ reply to the discussion on "A method of transmitting sound on the vision carrier of a television system"
784
The authors´ reply to the discussion on "A millisecond chronoscope"
785
The authors´ reply to the discussion on "A modern earth-fault relay equipment for use on systems protected by Petersen coils"
786
The authors´ reply to the discussion on "A new cathode-ray tube for monochrome and colour television"
787
The authors´ reply to the discussion on "A new power stroboscope for high-speed flash photography"
788
The authors´ reply to the discussion on "A new testing station for high-power circuit-breakers"
789
The authors´ reply to the discussion on "A precision A.C./D.C. comparator for power and voltage measurements"
790
The authors´ reply to the discussion on "A precision a.c./d.c. comparator for power and voltage measurements"
791
The authors´ reply to the discussion on "A short modern review of fundamental electromagnetic theory"
792
The authors´ reply to the discussion on "A simple connection between closed-loop transient response and open-loop frequency response"
793
The authors´ reply to the discussion on "A standard of frequency and its applications"
794
The authors´ reply to the discussion on "A storage system for use with binary-digital computing machines"
795
The authors´ reply to the discussion on "A storage system for use with binary-digital computing machines"
796
The authors´ reply to the discussion on "A theoretical and experimental investigation of anisotropic-dielectric-loaded linear electron accelerators"
797
The authors´ reply to the discussion on "A train performance computer"
798
The authors´ reply to the discussion on "A transatlantic telephone cable"
799
The authors´ reply to the discussion on "Absolute measurement of high voltages by oscillating electrode systems"
800
The authors´ reply to the discussion on "Accurate measurement of the group velocity of radio waves in the atmosphere, using radar technique", on "A method of determining the velocity of radio waves over land on frequencies near 100 kc/s" and on "The measu
801
The authors´ reply to the discussion on "Aluminium-sheathed cables"
802
The authors´ reply to the discussion on "An assessment of the impregnated pressure cable"
803
The authors´ reply to the discussion on "An electrical moisture meter"
804
The authors´ reply to the discussion on "An electronic process-controller"
805
The authors´ reply to the discussion on "An electron-trajectory tracer for use with the resistance network analogue"
806
The authors´ reply to the discussion on "An examination of high-voltage D.C. testing applied to large stator windings"
807
The authors´ reply to the discussion on "An experimental spaced-loop direction-finder for very high frequencies"
808
The authors´ reply to the discussion on "An investigation of the characteristics of cylindrical surface waves" and "Surface waves"
809
The authors´ reply to the discussion on "An on-off servo mechanism with predicted change-over"
810
The authors´ reply to the discussion on "An organization for internal standardization in a large manufacturing company" and "Standardization and simplification in the electrical industry"
811
The authors´ reply to the discussion on "Analysis-synthesis telephony, with special reference to the vocoder"
812
The authors´ reply to the discussion on "Artificial reverberation"
813
The authors´ reply to the discussion on "Assessment of speech communication links" and "Rating of speech links and performance of telephone networks"
814
The authors´ reply to the discussion on "Automatic circuit reclosers"
815
The authors´ reply to the discussion on "Basic ground-wave propagation characteristics in the frequency band 50-800 Mc/s" and "Ground-wave field-strength surveys at 100 and 600 Mc/s"
816
The authors´ reply to the discussion on "Boiler-house measurement and control for efficient fuel utilisation"
817
The authors´ reply to the discussion on "Busbar protection: a critical review of methods and practice"
818
The Authors´ Reply to the Discussion on "Cathodic Protection"
819
The authors´ reply to the discussion on "Comparison of ionospheric radio transmission forecasts with practical results"
820
The authors´ reply to the discussion on "Computer input and output, including analogue-digital conversion" at the Convention on Computer-Digital Techniques, 12th April, 1956
821
The authors´ reply to the discussion on "Construction and performance of commercially available computers-I"
822
The authors´ reply to the discussion on "Copper conductors for overhead lines"
823
The authors´ reply to the discussion on "Crystal valves"
824
The authors´ reply to the discussion on "D.C. winder drives using mercury-arc rectifier/inverters"
825
The authors´ reply to the discussion on "Design features of certain British power stations"
826
The authors´ reply to the discussion on "Design features of certain British power stations"
827
The authors´ reply to the discussion on "Design of power transformers to withstand surges due to lightning, with special reference to a new type of winding"
828
The authors´ reply to the discussion on "Development and utilization of hydro-electric power in Uganda"
829
The authors´ reply to the discussion on "Direct-current arc-welding generators and systems"
830
The authors´ reply to the discussion on "Direct-current arc-welding generators and systems"
831
The authors´ reply to the discussion on "Economic aspects of overhead equipment for d.c. railway electrification"
832
The authors´ reply to the discussion on "Economic plant sizes and boiler-set groupings on the British grid"
833
The authors´ reply to the discussion on "efficiency and reciprocity in pulse-amplitude modulation" and "transistor pulse generators for time-division multiplex"
834
The authors´ reply to the discussion on "Electric traction using 50-c/s current" and "Electric locomotives on the Valenciennes-Thionville line"
835
The authors´ reply to the discussion on "Electrical equipment for rectifier locomotives" and "Circuit calculations for rectifier locomotives and motor-coaches"
836
The authors´ reply to the discussion on "Electricity for world agriculture"
837
The authors´ reply to the discussion on "Electricity in farm crop-drying"
838
The authors´ reply to the discussion on "Electricity in the cotton industry"
839
The authors´ reply to the discussion on "Electricity in the manufacture of hydrogen peroxide"
840
The authors´ reply to the discussion on "Electricity in the wool-textile industry"
841
The authors´ reply to the discussion on "Electricity in the wool-textile industry"
842
The authors´ reply to the discussion on "Engine ignition faults, and a new method of diagnosis and location during running"
843
The authors´ reply to the discussion on "Engine ignition faults, and a new method of diagnosis and location during running"
844
The authors´ reply to the discussion on "Engineering principles applied to the design of domestic water-heating installations of the solid-fuel/electric type"
845
The authors´ reply to the discussion on "Factors affecting the design of an automatic electron-trajectory tracer"
846
The authors´ reply to the discussion on "Factors influencing the design of high-voltage air-blast circuit-breakers"
847
The authors´ reply to the discussion on "Fault-throwing tests on the 132-kV grid system under normal working conditions"
848
The authors´ reply to the discussion on "Frequency variations of quartz oscillators and the Earth´s rotation in terms of the N.P.L. caesium standard"
849
The authors´ reply to the discussion on "Gaseous discharge phenomena in high-voltage d.c. cable dielectrics"
850
The authors´ reply to the discussion on "Germanium and silicon power rectifiers"
851
The authors´ reply to the discussion on "High-speed recording of radio-telegraph signals"
852
The authors´ reply to the discussion on "Industrial applications. Part III"
853
The authors´ reply to the discussion on "Industrial fire risks"
854
The authors´ reply to the discussion on "Industrial fire risks"
855
The authors´ reply to the discussion on "Influence of humidity on the breakdown voltage of sphere-gaps and uniform-field gaps", "The influence of nearby earthed objects and of the polarity of the voltage on the direct-voltage breakdown of horizontal spher
856
The authors´ reply to the discussion on "Inherent current, voltage and speed control in dynamo-electric machinery"
857
The authors´ reply to the discussion on "Inherent current, voltage and speed control in dynamo-electric machinery"
858
The authors´ reply to the discussion on "Intensification of the X-ray image in industrial radiology"
859
The authors´ reply to the discussion on "Internal discharges in dielectrics: their observation and analysis"
860
The authors´ reply to the discussion on "Iron-loss measurements by a.c. bridge and calorimeter"
861
The authors´ reply to the discussion on "Laboratory and field tests on 132 kV synthetic-resin bonded-paper condenser bushings"
862
The authors´ reply to the discussion on "Localization of faults in low-voltage cables, with special reference to factory technique"
863
The authors´ reply to the discussion on "Low-level-modulation vision transmitters, with special reference to the Kirk O´Shotts and Wenvoe stations"
864
The authors´ reply to the discussion on "Maintenance of distribution plant and mains on a.c. networks"
865
The authors´ reply to the discussion on "Metal rectifiers"
866
The authors´ reply to the discussion on "Mineral-insulated metal-sheathed conductors"
867
The authors´ reply to the discussion on "Modern electric lift practice"
868
The authors´ reply to the discussion on "Multi-channel measurement of physical effects by confluent pulse technique, with particular reference to the analysis of strain"
869
The authors´ reply to the discussion on "Neutral earthing of three-phase systems, with particular reference to large power stations"
870
The authors´ reply to the discussion on "Operational control of electricity supply systems"
871
The authors´ reply to the discussion on "Owen Falls, Uganda, hydro-electric development"
872
The authors´ reply to the discussion on "Photographic exposure timers providing compensation for supply voltage variations"
873
The authors´ reply to the discussion on "Planning and Installation of the sound broadcasting headquarters for the B.B.C.´s overseas and European services"
874
The authors´ reply to the discussion on "Polyphase commutator machines"
875
The authors´ reply to the discussion on "Post-graduate activities in electrical engineering"
876
The authors´ reply to the discussion on "Practical aspects of telephone interference arising from power systems"
877
The authors´ reply to the discussion on "Printed and potted electronic circuits"
878
The authors´ reply to the discussion on "Progress report on the development of a photo-electric beam-index colour-television tube and system"
879
The authors´ reply to the discussion on "Protective finishing of electrical equipment"
880
The authors´ reply to the discussion on "Pulse communication"
881
The authors´ reply to the discussion on "Radio measurements in the decimetre and centimetre wavebands"
882
The authors´ reply to the discussion on "Radio telemetering"
883
The authors´ reply to the discussion on "Rapid methods for ascertaining whether the activity of a weak radioactive sample exceeds a predetermined level"
884
The authors´ reply to the discussion on "Recent developments in comparative methods of testing a.c. electricity meters"
885
The authors´ reply to the discussion on "Record of experience on the Irish electricity supply system"
886
The authors´ reply to the discussion on "Reinforced-concrete transmission line supports"
887
The authors´ reply to the discussion on "Reinforced-concrete transmission line supports"
888
The authors´ reply to the discussion on "Relaxation methods applied to the problem of a.c. magnetization of ferromagnetic laminae"
889
The authors´ reply to the discussion on "Restriking voltage as a factor in the performance, rating and selection of circuit-breakers"
890
The authors´ reply to the discussion on "Rural electrification: The use of the single-phase system of supply"
891
The authors´ reply to the discussion on "Selection of staff by means of intelligence and aptitude tests"
892
The authors´ reply to the discussion on "Service experience of the effect of corrosion on steel-cored-aluminium overhead-line conductors"
893
The authors´ reply to the discussion on "Short-circuit forces on turbo-alternator end-windings"
894
The authors´ reply to the discussion on "Short-distance communication—I"
895
The authors´ reply to the discussion on "Short-distance communication—II"
896
The authors´ reply to the discussion on "Silicon carbide non-ohmic resistors"
897
The authors´ reply to the discussion on "Silicon carbide non-ohmic resistors"
898
The authors´ reply to the discussion on "Silicon power rectifiers"
899
The authors´ reply to the discussion on "Some applications of the electrolytic tank to engineering design problems"
900
The authors´ reply to the discussion on "Some problems in aircraft magneto development"
901
The authors´ reply to the discussion on "Some projects favourable to direct-current transmission, and the role of the British electrical industry in relation thereto"
902
The authors´ reply to the discussion on "Some projects favourable to direct-current transmission, and the role of the British electrical industry in relation thereto"
903
The authors´ reply to the discussion on "Special effects for television studio productions"
904
The authors´ reply to the discussion on "Special requirements of a single-phase 25 kV traction feed from the National Grid"
905
The authors´ reply to the discussion on "Standardization of Switchgear"
906
The authors´ reply to the discussion on "Standardization of switchgear"
907
The authors´ reply to the discussion on "Standards of performance of generating plant, based on five years´ operating data"
908
The authors´ reply to the discussion on "Studies of telephone traffic with the aid of a machine"
909
The authors´ reply to the discussion on "Studio technique in television"
910
The authors´ reply to the discussion on "Submerged telephone repeaters for shallow water", "The Netherlands-Denmark submerged-repeater system" and "The British Post Office standard submerged-repeater system for shallow-water cables, with special mention o
911
The authors´ reply to the discussion on "Submersible pumping plant"
912
The authors´ reply to the discussion on "Substations, with particular reference to Yorkshire practice"
913
The authors´ reply to the discussion on "Technical arrangements for the sound and television broadcasts of the coronation ceremonies on 2nd June, 1953"
914
The authors´ reply to the discussion on "Tendencies in the design of the communication type of receiver"
915
The authors´ reply to the discussion on "Tendencies in the design of the communication type of receiver"
916
The authors´ reply to the discussion on "Tests of three systems of bandwidth compression of television signals"
917
The authors´ reply to the discussion on "The ´stereosonic´ recording and reproducing system. A two-channel system for domestic tape records"
918
The authors´ reply to the discussion on "The 400 kV grid system for England and Wales"
919
The authors´ reply to the discussion on "The absolute calibration of voltage transformers"
920
The authors´ reply to the discussion on "The application of electric discharge lamps to daylight signalling"
921
The authors´ reply to the discussion on "The application of electrical technique to the service of some other industries"
922
The authors´ reply to the discussion on "The application of electricity to horticulture"
923
The authors´ reply to the discussion on "The application of frequency modulation to v.h.f. multi-channel radiotelephony"
924
The authors´ reply to the discussion on "The application of low-pressure resins to some high-voltage switchgear designs"
925
The authors´ reply to the discussion on "The application of power transistors to the operation of gas-discharge lamps from d.c. supplies"
926
The authors´ reply to the discussion on "The application of transistors to the trigger, ratemeter and power-supply circuits of radiation monitors", "A point-contact transistor scaling circuit with 0.4 microsec resolution" and "A junction-transistor scalin
927
The authors´ reply to the discussion on "The automatic monitoring of broadcast programmes"
928
The authors´ reply to the discussion on "The B.B.C. television centre and its technical facilities"
929
The authors´ reply to the discussion on "The British grid system in war time"
930
The authors´ reply to the discussion on "The calculation of field strengths over a spherical earth"
931
The authors´ reply to the discussion on "The characteristics and protection of semiconductor rectifiers"
932
The authors´ reply to the discussion on "The design and performance of a new experimental single-transient oscillograph with very high writing speed"
933
The authors´ reply to the discussion on "The design and performance of domestic electric appliances"
934
The authors´ reply to the discussion on "The design and use of radio-frequency open-wire transmission lines and switchgear for broadcasting systems"
935
The authors´ reply to the discussion on "The design of high-speed salient-pole a.c. generators for water power plants"
936
The authors´ reply to the discussion on "The design of high-speed salient-pole a.c. generators for water-power plants"
937
The authors´ reply to the discussion on "The design, specification and performance of high-voltage surge diverters"
938
The authors´ reply to the discussion on "The determination of optimum process-controller settings and their confirmation by means of an electronic simulator", "The effects of the addition of some non-linear elements on the transient performance of a simpl
939
The authors´ reply to the discussion on "The development of and field tests on different types of high-voltage overhead traction equipment"
940
The authors´ reply to the discussion on "The development of Q-meter methods of impedance measurement"
941
The authors´ reply to the discussion on "The development of Q-meter methods of impedance measurement"
942
The authors´ reply to the discussion on "The digital computer applied to the design of large power transformers"
943
The authors´ reply to the discussion on "The effects of impulse voltages on transformer windings" before the Institution
944
The authors´ reply to the discussion on "The electrical engineering industry in the post-war economy"
945
The authors´ reply to the discussion on "The electrical installation in a viscose rayon factory"
946
The authors´ reply to the discussion on "The electrification of the Manchester-Sheffield-Wath lines, Eastern and London Midland Regions, British Railway"?
947
The authors´ reply to the discussion on "The electrification of the Manchester-Sheffield-Wath lines, Eastern and London Midland Regions, British Railways"
948
The authors´ reply to the discussion on "The elements of wave propagation using the impedance concept"
949
The authors´ reply to the discussion on "The extinction of arcs in air-blast circuit-breakers" and "The performance of high-voltage oil circuit-breakers incorporating resistance switching"
950
The authors´ reply to the discussion on "The first stage of the electrification of the Estrada de Ferro Santos a Jundiai (late Sao Paulo Railway)"
951
The authors´ reply to the discussion on "The flash tube and its applications"
952
The authors´ reply to the discussion on "The general planning and organization of colonial telecommunication systems"
953
The authors´ reply to the discussion on "The history of television"
954
The authors´ reply to the discussion on "The influence of inverse time-relay characteristics on discriminative time"
955
The authors´ reply to the discussion on "The installation of metal-sheathed cables on spaced supports"
956
The authors´ reply to the discussion on "The instrumentation of a 14-inch experimental rolling mill"
957
The authors´ reply to the discussion on "The London-Birmingham television radio-relay link"
958
The authors´ reply to the discussion on "The London-Birmingham television-cable system"
959
The authors´ reply to the discussion on "The Manchester?Kirk O´Shotts television radio-relay system"
960
The authors´ reply to the discussion on "The operation of large turbo-alternators to reduce rotor winding deformation"
961
The authors´ reply to the discussion on "The operation, maintenance and testing of overhead lines and associated outdoor equipment on a.c. systems"
962
The authors´ reply to the discussion on "The place of radiant, dielectric and eddy-current heating in the process heating field"
963
The authors´ reply to the discussion on "The place of radiant, dielectric and eddy-current heating in the process heating field"
964
The authors´ reply to the discussion on "The pulse-testing of wide-band networks"
965
The authors´ reply to the discussion on "The ventilation of substations"
966
The authors´ reply to the discussion on "The voltage characteristics of polythene cables"
967
The authors´ reply to the discussion on "Thermoplastic cables"
968
The authors´ reply to the discussion on "Three-phase distribution and electric welding and furnace loads"
969
The authors´ reply to the discussion on "Transformer-analogue network analysers"
970
The authors´ reply to the discussion on "Ultra-high-speed relays in the fields of protection and measurement"
971
The authors´ reply to the discussion on "V.H.F. propagation by ionospheric scattering and its application to long-distance communication"
972
The authors´ reply to the discussion on "Velocity-modulation valves"
973
The authors´ reply to the discussion on "Weather and electric power systems"
974
The authors´ reply to the discussion on ?A moving-coil relay applied to modern high-speed protective systems?
975
The authors´ reply to the discussion on ?Electrical installation at Calder Hall nuclear power station?
976
The authors´ reply to the discussion on ?Problems of hydro-electric design in mixed thermal-hydro-electric systems?
977
The authors´ reply to the discussion on ?Project considerations?
978
The authors´ reply to the discussion on ?Universal high-speed digital computers: a magnetic store?, ?Universal high-speed digital computers: serial computing circuits?, ?Universal high-speed digital computers: a small-scale experimental machine? and ?The
979
The authors´ reply to the discussion on ´"Direction-finding site errors at very high frequencies" and"Scattering of radio waves by metal wires and sheets"
980
The authors´ reply to the discussion on ´The life of oxide cathodes in modern receiving valves´
981
The authors´ reply to the discussion on ´The measurement of blade-tip clearances in aircraft turbines by a capacitance method´
982
The authors´ reply to the discussion on ´The measurement of steam temperatures in power stations´
983
The authors´ reply to the discussion on ´The mechanism of sub-harmonic generation in a feedback system´ and ´The response of remote-position-control systems with hard-spring non-linear characteristics to step-function and random inputs´
984
The authors´ reply to the discussion on ´The new high-frequency transmitting station at Rugby´
985
The authors´ reply to the discussion on ´The overhaul and maintenance of direct-current traction motors´
986
The authors´ reply to the discussion on ´The performance of directive aerials in complex u.h.f. fields´
987
The authors´ reply to the discussion on ´The phase/neutral system of supply for rural h.v. distribution´
988
The authors´ reply to the discussion on ´The place of formal study in the post-graduate training of an electrical engineer´
989
The authors´ reply to the discussion on ´The possibilities of a cross-channel power link between the British and French supply systems´
990
The authors´ reply to the discussion on ´The recognition of moving vehicles by electronic means´
991
The authors´ reply to the discussion on ´The standardization of retail electricity tariffs´
992
The authors´ reply to the discussion on ´The testing and specification of bushings in relation to service conditions´
993
The authors´ reply to the discussion on ´The testing and specification of bushings in relation to service conditions´
994
The authors´ reply to the discussion on ´The testing of fine wires for telecommunication apparatus´
995
The authors´ reply to the discussion on ´The transistor as a computing element-II´
996
The authors´ reply to the discussion on ´The transport, preparation and utilization of colliery tailings at the Emile Huchet power station´
997
The authors´ reply to the discussion on ´The use of an electron velocity analyser to stabilize a 50-kV direct-voltage source to a few parts in a million´ and ´A precision direct-current stabilizer´
998
The authors´ reply to the discussion on ´The use of an electrostatic wattmeter for magnetic-loss measurements´
999
The authors´ reply to the discussion on ´The use of steel-tank mercury-arc inverters for generating medium frequencies for induction heating´
1000
The authors´ reply to the discussion on ´The vertical radiation patterns of medium-wave broadcasting aerials´
