شماره ركورد :
1006533
عنوان مقاله :
پيش بيني عددي ويژگي هاي الاستيك كامپوزيت هاي تقويت شده با نانولوله كربني با روش چندمقياسي
عنوان به زبان ديگر :
Numerical prediction of elastic properties of carbon nanotube reinforced composites using multi-scale method
پديد آورندگان :
عالمي پروين، سينا دانشگاه آزاد اسلامي، واحد تبريز , محمدپور فتاحي، اصغر دانشگاه آزاد اسلامي، واحد تبريز - دانشكده فني و مهندسي
تعداد صفحه :
12
از صفحه :
117
تا صفحه :
128
كليدواژه :
نانولوله كربني , نانوكامپوزيت , لنارد جونز , چندمقياسي , واندروالسي
چكيده فارسي :
هدف اصلي اين پژوهش بررسي مدول الاستيك طولي نانوكامپوزيت هاي تقويت شده با نانولوله هاي كربني زيگزاگ و آرمچير در نسبت هاي حجمي و منظري متفاوت با شبيه سازي المان محدود است. براي اين منظور، يك المان حجمي سه فازي براي مدلسازي رفتار نانوكامپوزيت به كار گرفته شد و از المان هاي فنري غيرخطي براي مدلسازي اتصالات محيط فاز واسط استفاده و نيروي موثر بين نانولوله و رزين براساس پتانسيل لنارد - جونز تعيين شد. پس از ارزيابي و صحت سنجي مدل، مدول الاستيك و ضريب پواسون نانوكامپوزيت هاي تقويت شده با نانولوله هاي كربني زيگزاگ و آرمچير در نسبت هاي حجمي و منظري متفاوت استخراج گرديد. با افزايش نسبت هاي حجمي و منظري نانولوله، مقدار مدول الاستيك المان حجمي كامپوزيت افزايش و ضريب پواسون كاهش يافت. در نسبت هاي منظري و حجمي يكسان، مدول الاستيك كامپوزيت هاي تقويت شده با نانولوله هاي آرمچير و ضريب پواسون كامپوزيت هاي تقويت شده با نانولوله هاي زيگزاگ بيشتر مي باشد. همين طور نتايج تحقيق نشان مي دهد كه مدول الاستيك كامپوزيت مستقل از مدول الاستيك فاز واسط است.
چكيده لاتين :
The main goal of this research is study on longitudinal elastic modulus of nanocomposites reinforced with Zigzag and Armchair carbon nanotubes in different volume fractions and aspect ratios with finite element simulation. A three-phase volumetric element was used to model the behavior of the nanocomposite and used nonlinear spring strain elements to model the interfacial phase interface and the effective force between the nanotube and the resin based on the Lenard-Jones potential. After evaluation and validation of the model, the elastic modulus and Poisson coefficient were extracted from nanocomposites reinforced with Zigzag and Armchair carbon nanotubes in different volume fractions and aspect ratios. By increasing the nanotube volume fraction and aspect ratio, the amount of the elastic modulus of the composite increases. In the same aspect ratio and volume fraction, the modulus of elastic composites reinforced with armchair nanotubes and the Poisson coefficient of composites reinforced with zigzag nanotubes is higher. Also, the results of the study showed that the elastic modulus of the composite is independent of the elastic modulus of intermediate phase.
سال انتشار :
1397
عنوان نشريه :
دانش و فناوري هوافضا
فايل PDF :
7444639
عنوان نشريه :
دانش و فناوري هوافضا
لينک به اين مدرک :
بازگشت