شماره ركورد :
1041186
عنوان مقاله :
مقايسۀ دو كارنده جهت كشت سبزيها در خوزستان
عنوان به زبان ديگر :
Comparison of two Planter for Vegetable Cultivation in Khuzestan Province
پديد آورندگان :
محمدي اميني، زهرا دانشگاه شهيد چمران اهواز , منصوري، يعقوب دانشگاه شهيد چمران اهواز , ذكي ديسجي، حسن دانشگاه شهيد چمران اهواز
تعداد صفحه :
14
از صفحه :
15
تا صفحه :
28
كليدواژه :
ارزيابي , بذر , سبزي ها , سرعت پيشروي , كارنده , كشت سبزي
چكيده فارسي :
در اين پژوهش، رديف‌كار نيوماتيكي ساخت شركت تراشكده كرج و خطي‌كار ساخت شركت صنعت‌كاران دزفول ارزيابي و مقايسه شدند. پارامترهاي مستقل شامل نوع كارنده در دو سطح(رديف‌كار تراشكده و خطي‌كار صنعت‌كاران)، دو نوع سطح بستر(سطح صاف آزمايش و زمين شخم خورده)، سه سرعت پيشروي(3، 5 و 7 كيلومتر بر ساعت) و چهار نوع بذر(گوجه‌فرنگي، پياز، تربچه، كاهو) بوده و پارامترهاي وابسته شامل: ضريب پراكندگي جانبي بذرها نسبت به خط مستقيم كشت، درصد شكستگي و تاثير موزع روي قوه ناميه بذرها و ميزان مصرف بذر در واحد سطح بوده است. در اين آزمون‌ها از نرم افزار MSTATCو طرح‌ هاي آماري كرت‌هاي خردشده در قالب طرح پاية بلوك‌هاي كامل تصادفي در سه تكرار استفاده شد. مقادير بهينه براي شاخص ميزان كاشت بذر در هكتار (0/07 كيلوگرم) براي شاخص ضريب پراكندگي جانبي بذرها نسبت به خط مستقيم كشت (2/5ميلي متر)، براي شاخص درصد شكستگي بذر و شاخص درصد تاثير موزع روي قوه ناميه (صفر درصد) به دست آمد. بر اساس نتايج به دست آمده، از نظر شاخص ميزان بذر مصرفي در واحد سطح و پراكندگي جانبي بذر‌ها از خط مستقيم كشت، رديف‌كار تراشكده بهتر از كارنده صنعت‌كاران دزفول بوده است. از نظر شاخص درصد شكستگي بذر پس از عبور از موزع، به خاطر عدم تناسب برخي بذور با سلول‌هاي صفحه موزع، رديف‌كار تراشكده شكستگي بيشتري از خطي‌كار صنعت‌كاران داشته است كه دليل آن نامتناسب بودن اندازه سلول هاي صفحۀ موزع با اندازۀ برخي بذرها بوده است. از نظر شاخص درصد تاثير موزع روي قوه ناميه دو كارنده تفاوت معني‌داري نداشته اند.
چكيده لاتين :
In this research, the pneumatic planter made in karaj Tarashkade company and the driller made in Dezful Sanatkaran company, was compared and evaluated. The independent variables include, the type of planter at two levels (row crop planter and driller), two types of seed bed (smooth bed and plowed land), three ground speed (3, 5 and 7 km/h), 4 seed type (tomato, onion, radish and lettuce). The dependent variables include the seed’s lateral dispersion coefficient compared to the straight line, the seeds breakage percentage and the effect of metering devise on seed breakage and viability and the rate of seed shattering losses per hectare. In this test, a statistical software program MSTATC and split plot based on randomized complete block design with three replications was used. The results showed that: The optimal Index values for the rate of seeding per hectare is obtained was (0.07 kg), seed’s lateral dispersion coefficient in the straight line obtained (2.5 mm), percentage of seeds breakage and effect of the metering device on viability after passing the metering device was (0%). Therefore with respect to the seed’s lateral dispersion coefficient compared to the straight line and the rate of seed shattering losses per hectare index, row crop planter is better than driller. With respect to the seeds breakage percentage index and due to the misalignment of the cell's seed planters, row crop planter had more breakage than driller. With respect to the effect of metering devise on seed viability index, there was no significant difference between the two planters.
سال انتشار :
1395
عنوان نشريه :
تحقيقات سامانه ها و مكانيزاسيون كشاورزي
فايل PDF :
7566940
عنوان نشريه :
تحقيقات سامانه ها و مكانيزاسيون كشاورزي
لينک به اين مدرک :
بازگشت