عنوان مقاله :
بررسي تأثيرات ايجاد لين در پروانه يك پمپ گريز از مركز بر عملكرد آيروديناميكي آن
عنوان به زبان ديگر :
INVESTIGATION THE EFFECTS OF LEAN IN A CENTRIFUGAL PUMP IMPELLER ON ITS AERODYNAMIC PERFORMANCE
پديد آورندگان :
عسگرشمسي، ابوالحسن دانشگاه گلپايگان - دانشكده ي فني و مهندسي مكانيك , رضازاده، مرضيه دانشگاه گلپايگان - دانشكده ي فني و مهندسي مكانيك , ايرواني، آرش دانشگاه گلپايگان - دانشكده ي فني و مهندسي مكانيك
كليدواژه :
بازده , پمپ گريز از مركز , پروانه , حل عددي , زاويهي لين
چكيده فارسي :
پمپهاي گريز از مركز در اكثر صنايع بهعنوان يكي از اجزاي مهم براي انتقال مايعات كاربرد دارند. در اين پژوهش جريان سيال تراكمناپذير در شرايط پايا و مغشوش با استفاده از مدل آشفتگي rmk−omegaSST در نرمافزار rmANSYSY16.0 و با استفاده از شرط عدم لغزش روي ديوارهها، بهصورت عددي مدلسازي ميشود. يكي از عوامل مؤثر در افزايش بازدهي پروانهي پمپ گريز از مركز، تغيير توزيع شعاعي مراكز سطح پروفيلهاي دوبعدي است. در اين نوشتار، اين تغييرات در راستاي مماسي انجام شده و تغيير زاويهي لين در دو حالت ريشه ثابت و نوكثابت بررسي ميشود. با شبيهسازي ميدان جريان براي زواياي لين مختلف مشاهده ميشود كه ايجاد زاويهي لين منفي باعث افزايش بازدهي به ميزان 0٫51 درصد براي حالت ريشه ثابت و 1٫34 درصد براي حالت نوك ثابت ميشود.
چكيده لاتين :
Centrifugal pumps are used in the various industries as one of the important
components responsible for the movement of the incompressible fluids. In this
paper, the fluid flow of water in a centrifugal pump is simulated with a three-dimensional numerical solution. The operating fluid is considered to be
incompressible and in steady state condition. The numerical solution is
performed using a ANSYSY 16.0 software. The provided results are validated by
the pump manufacturer's characteristic curves. One of the effective factors in
increasing the efficiency of the centrifugal pump impeller is the change in
radial distribution of surface centers of two-dimensional profiles. In this
research, these changes have been done in tangential direction. The change of
the lean angle in two modes of fixed hub and fixed shroud has been performed.
The simulation of the flow field for various lean angles showed that the creation of a negative lean angle has been increased the efficency by 0.51% for the fixed hub and 1.34% for the fixed shroud.
عنوان نشريه :
مهندسي مكانيك شريف