شماره ركورد :
1196965
عنوان مقاله :
استفاده از ابعاد و شكل هندسي دانه هاي سنگ مخزن براي تصحيح مقادير پتروفيزيكي با شبيه سازي فضاي متخلخل بين دانه اي
عنوان به زبان ديگر :
Use of Dimensions and Geometrical Shape of Reservoir Rock Grains for Correction of Petrophysical Values Through Simulation of Interparticle Pore Space
پديد آورندگان :
رحيمي, مجتبي دانشگاه آزاد اسلامي واحد خميني شهر اصفهان - گروه مهندسي نفت , قاسمي, خسرو دانشگاه آزاد اسلامي واحد خميني شهر اصفهان - گروه مهندسي نفت
تعداد صفحه :
15
از صفحه :
21
از صفحه (ادامه) :
0
تا صفحه :
35
تا صفحه(ادامه) :
0
كليدواژه :
ريز پرتو ايكس , تخلخل , تراوايي , شبيه سازي , سنگ مخزن
چكيده فارسي :
در سال هاي اخير استفاده از تصاوير اسكن شده ريز پرتو ايكس در حد 100 نانومتر در زمينه هاي مختلف علمي، سبب به وجود آمدن روش هاي نوين براي انجام برخي محاسبات و اندازه گيري ها شده است. استفاده از اين تصاوير توسط پژوهش گران براي به دست آوردن برخي از مقادير مرتبط با سنگ مخزن مانند خواص پتروفيزيكي و نيز موارد مرتبط با سنگ و سيال مخزن به طور هم زمان مانند فرآيند ريزش و آشام در سنگ جايگاه ويژه اي پيدا كرده است. به اين منظور، ابتدا با استفاده از تصاوير ريز پرتو ايكس و با به كار بردن نرم افزارهاي لازم، برخي مقادير هندسي مربوط به دانه هاي سنگ دو نمونه مغزه محاسبه و نتايج به دست آمده با يكديگر مقايسه مي شوند. سپس با استفاده از همين تصاوير، اطلاعات لازم براي شبيه سازي فضاي متخلخل بين دانه هاي سنگ به دست مي آيد. در ادامه، با استفاده از اطلاعات حاصل و نرم افزارهاي ديگر، فضاي متخلخل مرتبط با هر يك از اين سنگ ها، شبيه سازي شده و با استفاده از آن ها، مقادير تخلخل و تراوايي هر سنگ محاسبه مي شود. در فرآيند شبيه سازي براي جلوگيري از پيچيده شدن محاسبات، از برخي فرضياتي استفاده مي شود كه سبب انحراف مقادير به دست آمده نسبت به مقادير حقيقي (آزمايشگاهي) مي شود. به همين دليل با استفاده از مقادير هندسي به دست آمده در بخش اول، رابطه اي را به دست مي آوريم كه اين مقادير را از طريق شبيه سازي، تا حد امكان به مقادير حقيقي نزديك كند. در اين پژوهش، براساس مراحل ذكر شده و بر مبناي كرويت، تحدب و نسبت تصوير حاصله از تصاوير دو بعدي، رابطه اي توسعه داده شد كه خواص اندازه گيري شده از تصاوير را با خواص اندازه گيري شده آزمايشگاهي مغزه مرتبط مي سازد.
چكيده لاتين :
In recent years, the use of micro X-Ray images with very high resolution (as low as 100 nm) in different scientific fields has led to the development of modern methods for performing various calculations and measurements. The use of these images has become quite popular among petroleum engineers. This is because the reservoir rock-related properties like petrophysical properties and the properties that are simultaneously related to reservoir rock and fluid such as drainage and imbibition phenomena can be estimated using micro X-Ray images. To estimate these properties, some geometrical properties of grainsof two different cores are calculated and compared to each other through micro X-Ray images and somesoftware. Then, with the help of the micro X-Ray images, the necessary information for simulation of thepore network of the rock is gathered. Afterward, with the use of this information and some other software, the pore network of each of these rocks is simulated and consequently, the porosity and permeability of each of these rocks are estimated. In the simulation process, some assumptions are made to prevent the complexity of the calculations. These assumptions result in a deviation of the calculated values from real (laboratory) values. Therefore, using the calculated geometrical values obtained in the first step, a relationship is achieved by which the calculated values of the simulation are brought closer to those of the laboratory. In this research, based on the aforementioned steps and by using the sphericity, convexity, and aspect ratio of grains obtained from 2D images, a correlation is developed. Ultimately, the estimated rock properties procured by simulation are related to measured laboratory data through this correlation
سال انتشار :
1399
عنوان نشريه :
مهندسي منابع معدني
فايل PDF :
8274201
لينک به اين مدرک :
بازگشت