شماره ركورد :
1233876
عنوان مقاله :
طراحي و ساخت آنتن پهن باند با قابليت تنظيم پذيري در قطبش دايروي براي استفاده در لينك هاي ارتباطي در باندهاي L و S
عنوان به زبان ديگر :
Design and Fabrication of the Wideband Circular-Polarization Antenna with Reconfigurable Capability for Communication Links in L and S Bands
پديد آورندگان :
محمدي شيركلايي، مرتضي داﻧﺸﮕﺎه ﻫﻮاﯾﯽ ﺷﻬﯿﺪ ﺳﺘﺎري - داﻧﺸﮑﺪه ﻣﻬﻨﺪﺳﯽ ﺑﺮق , جعفري، مجيد داﻧﺸﮕﺎه ﺷﺎﻫﺪ - داﻧﺸﮑﺪه ﻣﻬﻨﺪﺳﯽ ﺑﺮق
تعداد صفحه :
6
از صفحه :
65
از صفحه (ادامه) :
0
تا صفحه :
70
تا صفحه(ادامه) :
0
كليدواژه :
آنتن پچ هلالي شكل , تغذيه L-شكل , قطبش دايروي , تنظيم پذير
چكيده فارسي :
اين مقاله ، آنتن هاي پهن باند با قابليت تنظيم پذيري در قطبش دايروي براي استفاده در لينك هاي ارتباطي پيشنهاد شده است. براي دستيابي به پهناي باند امپدانسي وقطبش دايروي نسبتا خوب، الماني پيشنهاد شده ست كه داراي يك پچ هلالي شكل و دوخط تغذيه L-شكل مي باشد. آنتن هاي پيشنهادي اين قابليت را دارند كه مي توانند با استفاده از يك سوييچ RF كه در شبكه تغذيه قرار مي گيرد، قطبش دايروي چپ-گرد يا راست-گرد ايجاد كنند. دو ساختار تحليل و شبيه سازي شده اند. ساختار اول كه يك آنتن منفرد مي باشد و يك نمونه از آن نيز ساخته شد، داراي پهناي باند اندازه گيري شده امپدانسي 62% (S11<-10dB)و نسبت محوري 49% (AR<3dB) مي باشد. ساختار دوم يك آنتن آرايه اي 2 عنصره با پچ هلالي شكل و تغذيه L-شكل مي باشد. در اين آرايه از روش تغذيه چرخش متوالي استفاده شده است. با توجه به نتايج شبيه سازي شده ارايه شده، پهناي باند امپدانسي و AR آنتن آرايه اي به ترتيب 67% (1.31-2.62GHz) و 60% (1.3-2.4GHz) بدست آمده كه نسبت به آنتن واحد بيشتر هست. ماكزيمم گين آنتن آرايه اي حدود 10dB در پهناي باند موثر مي باشد. اين آنتن ها مي توانند در لينك هاي ارتباطي، سيستم هاي شنود و فريب باندهاي L و S استفاده شوند.
چكيده لاتين :
In this paper, broadband antennas with reconfigurable capability in circular polarization are presented for use in communication links. To achieve the impedance bandwidth and its relatively good circular motion, a German has been proposed that has a falcate patch and two L-shaped probes for feed lines. The proposed antennas can create a left-hand or right-hand circular polarization using an RF switch located in the feeding network. The two structures are analyzed and simulated. The first structure, which is a single antenna and a sample of which was made, has a measured impedance bandwidth 62% (S11 <-10dB) and 3dB axial ratio 49% (AR <3dB). The second structure is an array antenna 1*2 with two falcate patches, four L-shaped probes, and two Wilkinson power dividers. In this array, sequential rotation feeding networks used for enhancement axial ratio bandwidth. According to the simulated results, the impedance bandwidth and AR of the array antenna are 67% (1.31-2.62GHz) and 60% (1.3-2.4GHz), respectively, which is wider than the single antenna. The maximum gain of the array antenna is 10dB in effective bandwidth. These antennas can be used in communication links, electronic support measurement, jamming systems in L and S bands.
سال انتشار :
1399
عنوان نشريه :
صنايع الكترونيك
فايل PDF :
8449948
لينک به اين مدرک :
بازگشت