عنوان مقاله :
طراحي و شبيه سازي آنتن آرايه اي در باند Ku با گين بالا و سطح گلبرگ جانبي بسيار كم براي كاربردهاي فضايي و راداري
عنوان به زبان ديگر :
Design and Simulation of Array Antenna in Ku Band with High Gain and Very Low Sidelobe Level for Space and Radar Applications
پديد آورندگان :
آبشت، محمد فاقد وابستگي , آزادي طينت، نيما دانشگاه صنعتي شاهرود , عريضي، همايون دانشگاه علم و صنعت، تهران، ايران
كليدواژه :
آنتن هاي آرايه اي , رادار , پهن باند , بهره بالا , سطح گلبرگ جانبي , توزيع غير يكنواخت
چكيده فارسي :
تمركز اين مقاله بر طراحي و توسعه ي يك آنتن مايكرواستريپ آرايه اي با تغذيه تزويج روزنهاي با بهره بالا، پهناي باند زياد، سطح گلبرگ جانبي بسيار كم است. اين مشخصات و ويژگي ها از آنتن، كاربرد گسترده اي در صنايع نظامي و راداري و همچنين پروژه هاي فضايي دارد. شروع كار با طراحي تك عنصر به صورت بهينه آغاز شده و سپس آرايه ي كامل 512 عنصري با تغذيه و توزيع يكسان توان بين همه عناصر انجام شد و بهره بيش از 30 dB به دست آمد. براي كاهش سطح گلبرگ جانبي، شبكه تغذيه با استفاده از توزيع تيلور طوري طراحي شده تا دامنه مشخص مورد نياز هر عنصر كه متفاوت با ساير عناصر است، بهدست آيد و همچنين تمام عناصر آرايه به صورت هم فاز تغذيه شده اند. عناصري كه در ميان آرايه هستند بيش ترين توان و عناصري كناري توان كم تري را دريافت مي كنند. اين ساختار با 512 عنصر به صورت آرايه ي 16×32 طراحي شده و فركانس كاري اين آنتن از 5/12 تا 9/14 گيگاهرتز، معادل 17 درصد پهناي باند در باند Ku است. بهره اين آنتن 29 dB و تغييرات بهره در تمام طول بازه فركانسي اندك بوده كه مطلوب ما است و همچنين سطح گلبرگ جانبي بينdB -22 تا -29 dB در دو صفحه E و H است. در نهايت براي كاهش سطح گلبرگ پشتي از يك صفحه ي بازتابنده ي فلزي استفاده شد كه سطح F/B به بيش از 35 dB رسيد. ابعاد كلي آنتن 576 mm × 287 mm است.
چكيده لاتين :
The purpose of this article is design and development of an aperture coupling microstrip array antenna with high gain, high bandwidth, low side-lobe level. work with optimally design of element started. Then, the complete 512 element array was fed to all the elements by feeding and distributing the same power and gain was obtained over 30 dB. To reduce the side-lobe level, the feed network is designed with Taylor distribution so that the specific range required for each element, which is different from the other elements, is obtained and also, all elements of the array are fed in phase. The elements that are in the middle of the array receive the most power and the elements that are in the besides of the array receive the least power. This structure is designed with 512 elements in an array of 32 × 16, and the operating frequency of the antenna is 12.5 to 14.9 GHz, equivalent to 17% of bandwidth in the Ku band. The gain of this antenna is 29 dB and gain variations over the entire frequency range is low, which is desirable and the side-lobe level also varies between -22 dB and -29 dB on both of the E-plane and H-plane. Finally, a metal reflector plate was used to lower the Backlobe level, reaching F/B levels above 35 dB. The overall dimensions of the antenna are 576 mm × 288 mm.