شماره ركورد :
1302241
عنوان مقاله :
بررسي فاز دوم جابه‌جايي سه‌بعدي نانوذره‌ي طلا با استفاده از ميكروسكوپ نيروي اتمي و در سطوح زبر و صاف
عنوان به زبان ديگر :
Investigation of the second phase of three-dimensional manipulation of gold nanoparticles using atomic force microscope on rough and smooth surfaces
پديد آورندگان :
طاهري، معين دانشگاه اراك - دانشكده فني و مهندسي اراك - گروه مهندسي مكانيك، اراك، ايران , كريمي، پيمان دانشگاه اراك - دانشكده فني و مهندسي اراك - گروه مهندسي مكانيك، اراك، ايران , مرادزاده، حسن دانشگاه اراك - دانشكده فني و مهندسي اراك - گروه مهندسي برق، اراك، ايران
تعداد صفحه :
8
از صفحه :
199
از صفحه (ادامه) :
0
تا صفحه :
206
تا صفحه(ادامه) :
0
كليدواژه :
جابه‌جايي سه‌بعدي , نانوذره‌ي طلا , ميكروسكوپ نيروي اتمي , سطوح زبر , فاز دوم , هندسه‌ي ذره
چكيده فارسي :
مطالعه‌ي مواد در فرآيند نانوجابه‌جايي در دو فاز و با هدف بررسي حركت ذره قبل از شروع حركت و بعد از آن، صورت مي‌پذيرد. بررسي‌هاي صورت گرفته بر روي ذراتي همچون طلا در فاز نخست انجام شده و نيرو و زمان بحراني براي اين ذره با توجه به شرايط مختلف محيطي و هندسي محاسبه شده است. به‌منظور تكميل فرآيند در اين مقاله جابه‌جايي ذره‌ي طلا در فاز دوم مورد بررسي قرار گرفته است. در اين تحقيق مدل‌سازي حركت به صورت سه‌بعدي انجام شده و حركت ذره در سطوح زبر و صاف مورد مشاهده قرار گرفته است. در نهايت با استفاده از نتايج حاصل از مدل‌سازي و جابه‌جايي ذره‌ي طلا با استفاده از ميكروسكوپ نيروي اتمي و با توجه به وجود پستي و بلندي‌ها در ابعاد نانو، نتايج نشان‌دهنده‌ي جابه‌جايي بيشتر در سطوح صاف نسبت به خشن بوده و همچنين با توجه به بررسي حركت در دو راستاي x و y، جابه‌جايي در راستاي y بيشتر بوده است. از ديگر نتايج محاسبه شده در اين تحقيق، مي‌توان به بررسي پارامترهاي سطح و هندسه‌ي ذره‌ي طلا اشاره نمود.
چكيده لاتين :
The study of materials in nanomanipulation process is done in two phases with the aim of examining the motion of the particle before and after the motion. Studies have been performed on particles such as gold in the first phase and the critical force and time for this particle has been calculated according to different environmental and geometric conditions. In order to complete the process, in this paper, gold particle manipulation in the second phase is investigated. In this research, motion modeling has been done in three dimensions and particle motion has been observed on rough and smooth surfaces. Finally, using the results of modeling and manipulation of gold particles using atomic force microscope and due to the presence of elevations and heights in the nanoscale, the results show more displacement on smooth than rough surfaces and also according to the motion study. In both x and y directions, the displacement in the y direction was greater. Other results calculated in this study include the study of surface parameters and geometry of gold particles.
سال انتشار :
1401
عنوان نشريه :
مهندسي مكانيك دانشگاه تبريز
فايل PDF :
8730439
لينک به اين مدرک :
بازگشت