بر اساس عنوان

1
Development of a light duty arm with an active-fingertip gripper for handling discoid objects
2
Development of a light source with a sub-hertz linewidth for an Yb optical lattice clock
3
Development of a light weight mechanical link-type sensor to measure the motion of mastication
4
Development of a light weight torque limiting M-Drive actuator for hyper-redundant manipulator Float Arm
5
Development of a Light Weight, Military, Cesium Standard
6
Development of a lightning current waveform measuring system for 500 kV overhead transmission lines
7
Development of a Lightning Current Waveform Measuring System for 500 kV Overhead Transmission Lines
8
Development of a lightning recording and location system
9
Development of a light-weight biped humanoid robot
10
Development of a lightweight manipulator with constraint mechanism
11
Development of a light-weight robot end-effector using polymeric piezoelectric bimorph
12
Development of a lightweight, underactuated exoskeleton for load-carrying augmentation
13
Development of a line pressure control algorithm for reducing the power loss in hybrid electric vehicle
14
Development of a linear alternator-engine for hybrid electric vehicle applications
15
Development of a linear brushless DC motor drive with robust position control
16
Development of a Linear Electromagnetic Actuator for Implantable Artifical Heart
17
Development of a linear fiber optic pressure sensor
18
Development of a linear high-gradient magnetic separator
19
Development of a linear induction motor based artificial muscle system
20
Development of a Linear Micro Inductosyn Sensor
21
Development of a Linear Micro-Inductosyn Sensor
22
Development of a linear piston-type pulse power electric generator for powering electric guns
23
Development of a linear position independent Inductive Energy Transfer system
24
Development of a linear power amplifier for high frame rate imaging system [biomedical ultrasound imaging applications]
25
Development of a linearized model of a pressurized water reactor generating station for power system dynamic simulations
26
Development of a Linearly Polarized Cavity-Backed Antenna Using HMSIW Technique
27
Development of a line-focus refractive concentrator array for space applications
28
Development of a line-walking mechanism for power transmission line inspection purpose
29
Development of a link layer protocol using UML
30
Development of a Liquid Crystal Polymer low noise amplifier module at Ka-band
31
Development of a Liquid Flow Meter for Aerospace Instrumentation
32
Development of a liquid nitrogen pump using superconducting bulk motor
33
Development of a liquid oxygen density reference system
34
Development of a Liquid Scintillator Neutron Multiplicity Counter (LSMC)
35
Development of a liquid scintillator-based active interrogation system for LEU fuel assemblies
36
Development of a liquid Xe photon detector for μ→eγ decay search experiment at PSI
37
Development of a liquid Xe photon detector for μ→eγ decay search experiment at PSI
38
Development Of A Liquid-cooled Phosphoric Acid Fuel Cell/battery Power Plant For Transit Bus Applications
39
Development of a liquid-type human-body equivalent antenna using NaCl solution
40
Development of a list-mode ideal observer to perform classification tasks when imaging nuclear inspection objects under signal-known-exactly conditions
41
Development of a literature monitoring system for clinical engineers
42
Development of a lithium/thionyl chloride battery for the Mars Microprobe Program
43
Development of a liver model using PAM scaffolds in static and dynamic conditions
44
Development of a load balancing tool for the GRAPE rapid prototyping environment
45
Development of a load detecting system with three-valued output for construction manipulator
46
Development of a Local Web Server Linked to Malaysian Research and Education Network (MyREN)
47
Development of a localisation strategy for the South African wind energy industry
48
Development of a localised surface plasmon resonance sensor based on gold nanoparticles
49
Development of a localization arm for neurosurgery
50
Development of a localized e-commerce for music using indigenous knowledge - a South African experience
51
Development of a localized surface plasmon resonance platform for Candida albicans antigen identification
52
Development of a location-aware speech control and audio feedback system
53
Development of a locust-like jumping mechanism
54
Development of a Logic Layer in the Semantic Web: Research Issues
55
Development of a logical rule-based islanding detection method for distributed resources
56
Development of a long cycle life sealed nickel-zinc battery for high energy-density applications
57
Development of a long cycle life sealed nickel-zinc battery for high energy-density applications
58
Development of a long endurance autonomous underwater vehicle for ocean science exploration
59
Development of a Long Life Ka-band Inverted Coaxial Magnetron for Use in an Airborne Military Radar System
60
Development of a Long Life Triggered Spark Gap
61
Development of a long range autonomous underwater vehicle ≫OPEN"/AUV-EX1”
62
Development of a long term database for assessing the performance of transient ischemia detectors
63
Development of a long wavelength InGaAsP bottom solar cell for multijunction stacks
64
Development of a Long-Distance-Controlled Robot System for Engineering Education
65
Development of a Long-Distance-Controlled Robot System Using the Web for International Exchange
66
Development of a long-gauge distributed vibration sensor
67
Development of a longitudinal density monitor for storage rings
68
Development of a long-life triggered spark gap
69
Development of a long-life VRLA battery for communications
70
Development of a long-lifetime spark gap switch and its trigger generator for 2.0 MJ capacitive pulsed power supply module
71
Development of a Long-Lifetime Spark Gap Switch and Its Trigger Generator for 2.0-MJ Capacitive Pulsed Power Supply Module
72
Development of a long-pulse 1.3 GHz relativistic klystron amplifier
73
Development of A Long-Stroke Precision Positioning System with Force Feedback Effect
74
Development of a loop-type partial discharge sensor embedded in insulation material of a 245 kV-class GIS
75
Development of a lorentz-force actuated intravitreal jet injector
76
Development of a lorry monitoring and identification system
77
Development of a Low "G" Sensitivity Missile Clock
78
Development of a low backlash Crown Reducer
79
Development of a low complexity image compression engine on the stamp 2 module
80
Development of a low cost 3D optical compliant tactile force sensor
81
Development of a low cost 5-bit Ku-band phase shifter using HJ-FET packaged devices for DBS mobile reception
82
Development of a low cost 94ghz imaging receiver using multilayer Liquid Crystal Polymer technology
83
Development of a low cost and reliable power MOSFET gate driver for bridge configuration
84
Development of a low cost anthropomorphic robot hand with high capability
85
Development of a low cost Autonomous Underwater Vehicle for Antarctic exploration
86
Development of a low cost control workstation
87
Development of a low cost CSI-fed self controlled medium voltage synchronous machine drive system
88
Development of a low cost data acquisition system for the Space Shuttle solid rocket booster program
89
Development of a low cost dataglove based on arduino for virtual reality applications
90
Development of a low cost diagnostic system for dental therapy
91
Development of a low cost dielectric permittivity sensor for organic and inorganic materials in the microwave frequency range
92
Development of a low cost differential drive Intelligent Ground Vehicle
93
Development of a low cost embedded diagnosis system for servo controlled drives including data mining technologies
94
Development of a Low Cost Eye Diagram Analyzer for Optical Network Performance Monitoring Based on Q-Factor BER Estimation
95
Development of a low cost force sensor for wearable robotic systems
96
Development of a low cost fuel cell inverter system with DSP control
97
Development of a low cost fuel cell inverter system with DSP control
98
Development of a Low Cost Gamma-Ray Imaging System Using Handheld Scintillation Detectors for Visual Surveying of Radiation Fields with Robots
99
Development of a low cost Hemin based dissolved oxygen sensor with anti-biofouling coating for water monitoring
100
Development of a low cost induction motor drive system using a PVM, boost converter and three
101
Development of a low cost inertial measurement unit for UAV applications with Kalman Filter based attitude determination
102
Development of a low cost instructional platform for submersible design
103
Development of a low cost integrated 15 kW AC solar tracking subarray for grid connected PV power system applications
104
Development of a low cost microwave mixer using a broad-band substrate integrated waveguide (SIW) coupler
105
Development of a low cost motion actuator as an artificial joint for the physically handicapped person
106
Development of a Low Cost Motion Capture System to Analyze Wrist-Hand Complex
107
Development of a low cost optical tilt sensor
108
Development of a low cost precision blood resistivity measurement device based on Thompson Lampard theorem
109
Development of a Low Cost Printable Chipless RFID Humidity Sensor
110
Development of a low cost printable humidity sensor for chipless RFID technology
111
Development of a Low Cost Programmable Logic Controller
112
Development of a low cost quadrotor platform for swarm experiments
113
Development of a low cost real time strain monitoring system using DSP technique
114
Development of a low cost self-sensing Piezoresistive Microcantilever biosensor and read-out circuitry for measuring salivary-amylase activity
115
Development of a low cost sensor for measuring angle of irradiation
116
Development of a low cost SFCW ground penetrating radar
117
Development of a low cost smart meter to collecting data and in-place tests
118
Development of a low cost software package for the design of a brushless DC motor controller
119
Development of a low cost sun sensor using quadphotodiode
120
Development of a low cost system for nitrate and contamination detections in natural water supply based on a planar electromagnetic sensor
121
Development of a low cost thermal feedback system for basic control education
122
Development of a low cost vertical axis wind turbine to study the prospect of wind power in Dhaka, Bangladesh
123
Development of a low cost wearable prototype for long-term vital signs monitoring based on embedded integrated wireless module
124
Development of a low cost X-band solid state transmitter for low volume commercial applications
125
Development of a low cost, fault tolerant, and highly reliable command and data handling computer (PulseTM)
126
Development of a low cost, FM/CW transmitter for remote sensing
127
Development of a Low CTE chip scale package
128
Development of a Low EMI Micro-controller Package for Automobile Applications
129
Development of a low emittance electron gun based on field emission cathodes
130
Development of a low heat leak current-lead system
131
Development of a low impedance pulse generator for the anode plasma generation in B/sub APPL/ diodes used on the KALIF-accelerator
132
Development of a Low Loss, High Dielectric Strength Microwave Substrate
133
Development of a low motion-noise humanoid neck: Statics analysis and experimental validation
134
Development of a Low Noise FOA Tranformer Cooler Part I: Fan and Heat Exchanger Design
135
Development of a Low Noise FOA Transformer Cooler Part I: Fan and Heat Exchanger Design
136
Development of a Low Noise FOA Transformer Cooler Part II: Acoustic Design
137
Development of a Low Noise FOA Transformer Cooler Part II: Acoustic Design
138
Development of a low noise heterodyne receiver at 3THz
139
Development of a low noise L-band dielectric resonator oscillator
140
Development of a low noise preamplifier for the detection and position determination of single electrons in a Cerenkov ring imaging detector by charge division
141
Development of a low power wireless network to support elderly people based on eZ430-Chronos and SimpliciTI
142
Development of a low pressure driven pneumatic actuator and its application to a robot hand
143
Development of a low profile conformal UHF RFID tag antenna for identification of water bottles
144
Development of a low stress silicon-carbon liquid encapsulant
145
Development of a low temperature PZT/polymer paste for screen printed flexible electronics applications
146
Development of a low viscosity insulating fluid based on vegetable oil
147
Development of a low viscosity insulating liquid based on natural esters for distribution transformers
148
Development of a low voltage power booster TWT for a Q-band MMPM
149
Development of a low voltage power booster TWT for a Q-band MMPM
150
Development of a low voltage source driver for large TFT-LCD system for computer applications
151
Development of a Low-altitude Hyperspectral Imaging System for Measuring Ground Truth in Agricultural Fields
152
Development of a low-cost 8/spl times/8 optical switch using micro hot embossing
153
Development of a Low-cost Active RFID Platform
154
Development of a low-cost and portable device controller for point-of-care medical diagnostics
155
Development of a low-cost anthropomorphic manipulator for commercial usage
156
Development of a low-cost application of virtual reality for the promotion of cultural heritage
157
Development of a low-cost autonomous oceanographic observation vehicle
158
Development of a low-cost device to detect blood backflow in catheters
159
Development of a low-cost embedded system for an optical-forensic device
160
Development of a low-cost extruded scintillator with co-extruded reflector for the MINOS experiment
161
Development of a low-cost fall intervention system for hospitalized dementia patients
162
Development of a low-cost FES-bicycle system
163
Development of a low-cost flexible modular robot GZ-I
164
Development of a Low-Cost FPGA-Based SSVEP BCI Multimedia Control System
165
Development of a Low-Cost Hemin-Based Dissolved Oxygen Sensor With Anti-Biofouling Coating for Water Monitoring
166
Development of a Low-Cost High-Fidelity Simulator for Search and Rescue Robot
167
Development of a Low-Cost Insulin Infusion Pump: Lessons Learned from an Industry Case
168
Development of a low-cost integrated GPS/IMU system
169
Development of a low-cost low-loss polymer waveguide technology for parallel optical interconnect applications
170
Development of a low-cost magnetic microfluidic chip for circulating tumour cell capture
171
Development of a low-cost medical image processing system
172
Development of a Low-Cost Microwave Radiometer for the Early Detection of Fire in Forest Environments
173
Development of a low-cost modular pole climbing robot
174
Development of a low-cost optical fibre colour and displacement sensor measuring instrument
175
Development of a low-cost packaging for MEMS pressure sensors
176
Development of a Low-cost PC-based Endoscope System
177
Development of a low-cost pH sensor based on plastic optical fibers
178
Development of a low-cost platform for control engineering education
179
Development of a low-cost portable Surface Plasmon Resonance biosensor
180
Development of a low-cost profile scanner using DVD pickup head and CCD image sensor
181
Development of a low-cost remotely operated vehicle for ocean exploration
182
Development of a Low-Cost Self-Diagnostic Module for Oil-Immerse Forced-Air Cooling Transformers
183
Development of a low-cost semi-passive transponder for sensor applications at 2.4GHz
184
Development of a low-cost system for temperature monitoring
185
Development of a low-cost tactile sleeve for autism intervention
186
Development of a low-cost Unmanned Surface Vehicle for digital survey
187
Development of a Low-cost Upper-limb Myoelectrical Prosthestis and its Open Source Training System
188
Development of a low-cost water treatment technology using Moringa oleifera seeds
189
Development of a low-cost wireless monitoring System supporting the Continuity of Medical Care of the Patient at home
190
Development of a low-cost, adaptive, clinician-friendly virtual rehabilitation system
191
Development of a low-cost, compact planar synchronous receiver for UWB systems
192
Development of a low-cost, man-portable, Phased Array X-Band Radar
193
Development of a low-cost, modular, reliable, Shuttle-launched payload booster
194
Development of a low-cost, self-contained, combined vision and inertial navigation system
195
Development of a Low-EMI Advanced Variable Speed Drive for Shipboard Applications
196
Development of a Low-Energetic Metastable Helium Beam Injector for Electric Field Diagnostics by Laser-Induced Fluorescence Method in Inertial Electrostatic Confinement Plasmas
197
Development of a low-energy gamma CT system: Application to two-phase pipe flow visualization
198
Development of a low-energy large-aperture electron beam generator
199
Development of a low-energy proton accelerator system for the Proton Engineering Frontier Project (PEFP)
200
Development of a Lower Body Negative Pressure Box with an Environmental Control System for Physiological Studies
201
Development of a lower confidence limit for the number of signals
202
Development of a lower extremity exoskeleton - preliminary study for dynamic walking
203
Development of a lower extremity exoskeleton for human performance enhancement
204
Development of a lower extremity Exoskeleton Robot with a quasi-anthropomorphic design approach for load carriage
205
Development of a lower extremity exoskeleton suit actuated by hydraulic
206
Development of a lower extremity exoskeleton system for human-robot interaction
207
Development of a Lower Extremity Rehabilitation Aid Utilizing an Insole-Integrated Load Sensor Matrix and a Sole-Embedded Measurement Node
208
Development of a lower limb rehabilitation robot based on free gait and virtual reality
209
Development of a low-frequency high purity A0 mode transducer for SHM applications
210
Development Of A Low-frequency Plasma Torch For The Destruction Of Toxic Solvents
211
Development of a low-frequency quantum-based AC Power Standard at NRC Canada
212
Development Of A Low-frequency, Deep-towed Geoacoustics System
213
Development of a low-IF receiver and a fixed wireless utility network
214
Development of a low-impedance traveling wave amplifier based on InAlAs/InGaAs/InP-HFET for 20 Gb/s optoelectronic receivers
215
Development of a low-loss multilayered broadband balun using twin-thickness thin-film
216
Development of a low-loss, non-critically phase-matched, 1-μm-pumpable ZGP analog for the mid-infrared
217
Development of a low-noise active balun for a dual-polarized planar connected array antenna for ASKAP
218
Development of a low-noise analog front-end ASIC for CdTe detectors
219
Development of a low-noise front-end electronics for a multi-channel APD readout system
220
Development of a Low-Noise Front-End Readout Chip Integrated With a High-Resolution TDC for APD-Based Small-Animal PET
221
Development of a low-noise wide-band phased-array feed
222
Development of a low-noise X-band CW klystron power oscillator
223
Development of a Low-Power Digital Inertial Reference Assembly
224
Development of a low-power high-sensitivity cloud profiling FM-CW radar at 95 GHz
225
Development of a low-power SRAM compiler
226
Development of a low-power, hazardfree t-gate
227
Development of a Low-Profile Circularly Polarized Cavity-Backed Antenna Using HMSIW Technique
228
Development of a low-profile sensor using electro-conductive yarns in recognition of slippage
229
Development of a low-speed multi-pole synchronous machine with a field winding on the stator side
230
Development of a low-temperature electro-mechanical testing device
231
Development of a LPP EUV light source for below-32nm Node Lithography
232
Development of a LSO based quality check procedure for the microPET® animal scanner
233
Development of a LTCC Micro Spray Dryer
234
Development of a lumped constant type optical modulator in the microwave band for digital terrestrial TV broadcasting
235
Development of a Lunar Rock Drill and Subsurface Sampling System
236
Development Of A Lung Imaging Fluorescence Endoscope
237
Development of a Lung Magnetic Field Measurement Car
238
Development of a Mach–Zehnder Modulator Photonic Local Oscillator Source
239
Development of a Machine-Road Simulator for Performance Investigation of Height Measuring Sensors in Earth Moving Machinery
240
Development of a macro/micro mechanism for human scale teleoperating system
241
Development of a made to measure process for customizing lumbar orthotics for obese people
242
Development of a Maglev Propulsion System Based on the Halbach Magnet Arrays
243
Development of a MAGLEV superconducting magnet for the Yamanashi test line in Japan: vibration characteristics and analysis for design
244
Development of a magnet-assisted autopuffer GCB
245
Development of a magnetic control system for an electric wheelchair using the tongue
246
Development of a Magnetic Cusp Gun for Terahertz Harmonic Gyrodevices
247
Development of a magnetic diagnostic suitable for the ITER radiation environment
248
Development of a magnetic field measurement system using a tri-axial search coil
249
Development of a magnetic force booster
250
Development of a magnetic inductance tomography system
251
Development of a magnetic linear motor based on a friction drive
252
Development of a magnetic linear motor based on a friction drive
253
Development of a magnetic measurement system for mandibular movement using neural networks
254
Development of a Magnetic Planetary Gearbox
255
Development of a magnetic pulse compression modulator for flue gas treatment
256
Development of a magnetic pulse compression modulator for flue gas treatment
257
Development of a magnetic pulse compression modulator for flue gas treatment
258
Development of a magnetic resonance elastic microscope system
259
Development of a magnetic resonance-compatible tactile orientation delivery system
260
Development of a magnetic seat sensor for monitoring condition of a car driver
261
Development of a magnetic sensing device for tooth displacement under orthodontic forces
262
Development of a magnetic Single Cell Micro Array
263
Development of a magnetically suspended centrifugal blood pump using optimal control theory
264
Development of a magnetic-field generator at 20 kHz using a Voltage-Source Inverter for biological research
265
Development of a Magnetic-Geared Permanent-Magnet Brushless Motor
266
Development of a magnetized coaxial plasma gun for simulation experiment of type-I ELM heat loads
267
Development of a Magnetless Flux Switching Machine for Rooftop Wind Power Generation
268
Development of a magneto-hydrodynamic solver for anatomical models
269
Development of a Magnetostrictive Linear Motor for Microrobots Using Fe-Ga (Galfenol) Alloys
270
Development of a magnetron-enhanced plasma process for tungsten etchback with response-surface methodology
271
Development of a maintenance free lead acid battery for inertial navigation systems in large military aircraft
272
Development of a Malaysian Currency Note Recognizer for the Vision Impaired
273
Development of a man/machine interface system for the JT-60 upgrade
274
Development of a management information system at South Bank Polytechnic
275
Development of a management system of laboratory equipment based on UHF RFID
276
Development of a manipulator suspended by parallel wire structure
277
Development of a manipulator with straight-fiber-type artificial muscle and differential gear mechanism
278
Development of a Manipuri stemmer: A hybrid approach
279
Development of a man-portable microclimate adsorption cooling device
280
Development of a manufacturable low pressure ROXNOX oxidation process [for CMOS technology]
281
Development of a manufacturing engineering system for the motor industry
282
Development of a manufacturing industry success rate analyzer using data mining technique
283
Development of a manufacturing workcell management system
284
Development of a map matching method using the multiple hypothesis technique
285
Development of a map vectorization method involving a shape reforming process
286
Development of a mapping and guidance database for automobile navigation system
287
Development of a marine current turbine simulator based on HILS concept
288
Development of a marine diesel particulate filter (M-DPF) applied for high frequency induction heating
289
Development of a marine ecosystem and micro structure monitoring AUV for plankton environment
290
Development of a marine G.I.S. with the view on the monitoring and modelling of the Guayas estuary and the Estero Salado in Ecuador
291
Development of a marine geographic information system for various data analysis and data integration in the Hawaiian exclusive economic zone
292
Development of a Maritime Electronic Warfare and Sensor Systems EMI Mathematical Assessment Capability
293
Development of a market approach to integrate microsources in LV distribution networks
294
Development of a Marketable Small Commercial Electric Vehicle in India
295
Development of a Markov-Chain-Based Energy Storage Model for Power Supply Availability Assessment of Photovoltaic Generation Plants
296
Development of a maskless microplasma surface patterning system for biologics printing
297
Development of a massage robot for medical therapy
298
Development of a massively-parallel, biological circuit simulator
299
Development of a mass-producible waveguide lens antenna
300
Development of a Master Oscillator using Active Multipliers for Intelsat VIII Satellites
301
Development of a Master Slave System with Force Sensing Using Pneumatic Servo System for Laparoscopic Surgery
302
Development of a master station for the remote control of rescue robots
303
Development of a masters program in engineering management
304
Development of a mastication robot using nonlinear viscoelastic mechanism
305
Development of a matching optics unit (MOU) for the coaxial ITER gyrotron at KIT
306
Development of a material flow control system with Kyrie: a language for integrating rule-based programming and object-oriented programming
307
Development of a material heating system by using a 300 GHz gyrotron FU CW I
308
Development of a material phase detection system using capacitance tomography
309
Development of a Materials-Oriented General Chemistry Course: Concepts and Examples
310
Development of a Mathematical Model for Ion Exchange Process for Desalination of Water
311
Development of a mathematical model for solar module in photovoltaic systems
312
Development of a mathematical model for VARS transmission in electric power systems
313
Development of a mathematical model of a train in the energy point of view for the international conference on control, automation and systems 2007 (ICCAS 2007)
314
Development of a mathematical model of the system receiver-emitter optical sensors for effectively measuring small linear displacement
315
Development of a Mathematical Model to Estimate Ice Loading on Transmission Lines by Use of General Climatological Data
316
Development of a Mathematical Model to Estimate Ice Loading on Transmission Lines by Use of General Climatological Data
317
Development of a mathematical model to estimate negative impacts on human health with the help of risk maps and Fuzzy membership functions
318
Development of a MATLAB based model for the biological water processor of the water recovery system of an advanced life support program
319
Development of a MATLAB Based Target Tracking Simulation Environment
320
Development of a Matlab software for analysis of heart rate variability
321
Development of a MATLAB tool based on graph theory for evaluating reliability of complex mechatronic systems
322
Development of a MATLAB toolbox for parametric robust control - new algorithms and functions -
323
Development of a MATLAB/Simulink Model of a Single-Phase Grid-Connected Photovoltaic System
324
Development of a Matlab-based brain mapping software system
325
Development of a MATLAB-based toolbox for brain computer interface applications in virtual reality
326
Development of a matrix converter induction motor drive
327
Development of a Maxillofacial Multi-arm Surgery Robot
328
Development of a maximum power tracking unit integrated in wind turbine simulator
329
Development of a maximum-power-point tracking algorithm for direct methanol fuel cell and its realization in a fuel cell/supercapacitor hybrid energy system
330
Development of A Meal Assistive Exoskeleton made of Soft Materials for polymyositis patients
331
Development of a measure to assess the quality of user-developed applications
332
Development of a measurement and autonomous control system for wave-powered boats
333
Development of a measurement and real-time display system for kinematics and muscle synergy of gait
334
Development of a measurement platform for indoor photovoltaic energy harvesting in materials handling applications
335
Development of a measurement robot for identifying all inertia parameters of a rigid body in a single experiment
336
Development of a Measurement Setup for High Impulse Currents
337
Development of a measurement system for high-speed spindle displacement
338
Development of a measurement system for power quantities in electrical energy distribution systems
339
Development of a measurement system for spectrum awareness
340
Development of a measurement system to test the efficiency of electrical generators for energy recovery on aircraft actuators
341
Development of a measurement technique for high frequency characterization of insulation materials [power cable insulation applications]
342
Development of a measurement technique for highly conductive CVD diamonds and analysis of uncertanties due to 3D heat losses
343
Development of a Measuring Device for the Parasitic Inductance of the DC-link Backplane of an Inverter
344
Development of a measuring system for shoulder abduction and adduction
345
Development of a Measuring System of Contact Force during Braille Reading Using an Optical 6-Axis Force Sensor
346
Development of a Mechanical Component Failure Database
347
Development of a mechanical strain sensor based on time reversal of ultrasonic guided waves
348
Development of a mechanical stress-analysing-tool to characterize packaging processes
349
Development of a mechanical talking robot that produces natural vowels and consonant sounds
350
Development of a mechanically coupled, six degree-of-freedom load platform for biomechanics and sports medicine
351
Development of a Mechanically Scanned Doppler Blood Flow Catheter
352
Development of a mechanically similar composite bone replica
353
Development of a mechanotherapy unit for examining the possibility of an intelligent massage robot
354
Development of a mechatronic device for high-speed coin sorting
355
Development of a mechatronic sorting system for removing contaminants from wool
356
Development of a mechatronic unit applied to the manipulation of explosives
357
Development of a Mechatronical Device to Measure Plantar Pressure for Medical Prevention of Gait Issues
358
Development of a mechatronics course at Monash University, Australia
359
Development of a mechatronics laboratory-eliminating barriers to manufacturing instrumentation and control
360
Development of a mechatronics platform for automotive collision free maneuvers
361
Development of a Mechatronics-Based Citizen Science Platform for Aquatic Environmental Monitoring
362
Development of a media server system based on the DAVIC standard
363
Development of a medical fiber-optic oxygen sensor based on optical absorption change
364
Development of a medical fiber-optic pH sensor based on optical absorption
365
Development of a medical implant coating with bioactive glass for temperature sensitive materials using a pulsed electron beam device
366
Development of a medical robot system for pedicle screw surgery assisted by fluoroscopic X-ray image
367
Development of a medical tele-analyzer for abdominal mass analysis
368
Development of a Medical Telediagnostic System with Tactile Haptic Interfaces
369
Development of a medium power L-band traveling-wave amplifier
370
Development of a medium power L-band traveling-wave amplifier
371
Development of a medium-/small-scale local area optical fiber loop network
372
Development of a medium-bore high-efficiency helical coil electromagnetic launcher
373
Development of a Meeting Browser towards Supporting Public Involvement
374
Development of a Megahertz High-Voltage Switching Pulse Modulator Using a SiC-JFET for an Induction Synchrotron
375
Development of a mega-pixel and milli-second vision system using intelligent pixel selection
376
Development of a megawatt C-band klystron for radar
377
Development of a Megawatt-class multi-beam inductive output tube
378
Development of a melt processing route for the fabrication of Tl-1223 coils
379
Development of a memetic algorithm for Dynamic Multi-Objective Optimization and its applications for online neural network modeling of UAVs
380
Development of a memory label system for consumer VCRs
381
Development of a memory-dynamic NU-FDTD Maxwell´s solver for wireless communications applications
382
Development of a MEMS based wearable motion capture system
383
Development of a MEMS DC electric current sensor applicable to two-wire electrical appliance cord
384
Development of a MEMS gyroscope for northfinding applications
385
Development of a MEMS microsystem to study the effect of mechanical tension on cerebral cortex neurogenesis
386
Development of a MEMS microvalve array for fluid flow control
387
Development of a MEMS microwave switch and application to adaptive integrated antennas
388
Development of a MEMS position transducer using bulk piezoresistivity of suspensions
389
Development of a MEMS rotation sensor for oilfield applications
390
Development of a MEMS technology CSFH based microgripper
391
Development of a MEMS test platform for investigating the use of multi-walled CNT composites electric contacts
392
Development of a MEMS testing methodology
393
Development of a MEMS-based control system for compressible flow separation
394
Development of a MEMS-based electro-rheological microfinger system with an alternating pressure source
395
Development of a MEMS-based gate to enhance cold-cathode electron field emission for space applications
396
Development of a MEMs-based IMU Unit
397
Development of a MEMS-based Raman spectrometer
398
Development of a MEMS-enabled frequency selective surface
399
Development of a MEMS-Scale Photoacoustic Chemical Sensor Using a Quantum Cascade Laser
400
Development of a mental stress relaxation tool based on guided imagery and Microsoft Kinect
401
Development of a mercury battery voltage standard operated at 0/spl deg/C
402
Development of a mesoscale self-contained bounding robot
403
Development of a meta-blackboard shell
404
Development of a metal anode ignitron switch tube
405
Development of a metal homogenizer for concentrator monolithic multi-junction-cells
406
Development of a metal hydride actuator driven only by solar heat
407
Development of a Metamodel for Medical Database Management on a Grid Network: Application to Health Watch and Epidemiology for Cancer and Perinatal Health
408
Development of a meteorological and oceanographic drifting buoy system
409
Development of a meteorology and remote sensing experimental platform: The LAICAnSat-1
410
Development of a method and software for human motion training based on an inertial measurement units system
411
Development of a method correcting O-D matrix with biased error using screen line traffic
412
Development of a method for data integration to aid in decision making in coronary patients with non-malignant ventricular arrhythmias
413
Development of a method for determining arterial pulse propagation times and influence of arterial compliance
414
Development of a method for direct conversion of a photogrammetric point cloud, to points of head´s movement of a CNC milling machine: (or 3D printer), for reproduction and conservation of the architectural and archaeological heritage, applied to the repr
415
Development of a method for estimating motor efficiency and analyzing motor condition
416
Development of a method for estimating the probability of detecting fish through a hydroacoustic beam
417
Development of a method for extracting graph elements from mathematical graphs
418
Development of a method for image-based motion estimation of a VTOL-MAV on FPGA
419
Development of a method for left ventricular shape evaluation based on surfaces obtained by real-time 3D echocardiographic images
420
Development of a method for marine accident analysis with bridge simulator
421
Development of a method for marine accident analysis with concepts of PRA
422
Development of a method for measuring thermal comfort in medical clothing through the hot plate apparatus
423
Development of a Method for Passive Measurement of Radiation Doses at Ultra-High Dose Range
424
Development of a method for remote sensing of land-cover change 1980-2000 in the USFS North Central Region using heterogeneous USGS LUDA and NOAA AVHRR 1 km data
425
Development of a method for the implementation of interoperable tool chains applying mechatronical thinking — Use case engineering of logic control
426
Development of a method for the synthesis of topology in infocommunication systems
427
Development of a method for ultrasound-guided placement of pedicle screws
428
Development of a Method of Calculating the Melting Characteristics of OPGW Strands Due to DC Arc Simulating Lightning Strike
429
Development of a Method of Construction Radar-Tracking Images of the Air Targets
430
Development of a method of harmonic balance for multi-periodic solutions of the nonlinear equations
431
Development of a method of optimising data distribution on a loosely coupled multiprocessor system
432
Development of a method of partial discharge detection in extra-high voltage cross-linked polyethylene insulated cable lines
433
Development of a method of passive measurement of radiation doses at ultra-high dose range
434
Development of a method to analyze the impact of manufacturing systems engineering on product quality
435
Development of a method to construct three-dimensional finite element models of thoracic aortic aneurysms from MRI images
436
Development of a method to detect coral bleaching using airborne hyperspectral sensor
437
Development of a method to determine operator location using electromagnetic proximity detection
438
Development of a method to determine the dependencies of load moments and elastic moments on element parameters during the rolling process for dynamical states of a drive system for the rolling machine- roller table
439
Development of a method to evaluate deterioration degree of low-voltage PVC sheathed cable
440
Development of a method to grasp the corporate profit contribution rate of eco-friendly products
441
Development of a Method to Identify in-Plane Anisotropy Axes in Soft Magnetic Materials Using a Standard Vibrating Sample Magnetometer
442
Development of a method to measure knee joint sounds
443
Development of a method to quantify inter-limb coupling in individuals with hemiparetic stroke
444
Development of a Methodological Framework for the Self Reconfiguration of Automated Visual Inspection Systems
445
Development of a methodology for clustering electricity-price series to improve customer response initiatives
446
Development of a methodology for cost-oriented ramp-up design
447
Development of a methodology for flood hazard detection in urban areas from RADARSAT-2 imagery
448
Development of a methodology for forecasting electricity-price series to improve Demand Response Initiatives
449
Development of a Methodology for Improving Photovoltaic Inverter Reliability
450
Development of a methodology for improving the effectiveness of customer response policies through electricity-price patterns
451
Development of a methodology for knowledge engineering in the work-place
452
Development of a Methodology for Piracy Protection of Software Installations
453
Development of a methodology for studying the bending angle of head and neck
454
Development of a methodology for transmission planning in deregulated electric sectors
455
Development of a methodology to forecast time series using few input variables
456
Development of a methodology to improve the sourcing process
457
Development of a Methodology, Software -- Suite and Service for Supporting Software Architecture Reconstruction
458
Development of a metrological scanning probe microscope incorporating a quartz tuning fork sensor and heterodyne laser interferometry
459
Development of a MHz RF leak detector technique for aircraft hardness surveillance
460
Development of a micro accelerometer based MOEMS
461
Development of a micro array type electron multiplier
462
Development of a micro array type electron multiplier
463
Development of a micro autonomous underwater vehicle for complex 3-D sensing
464
Development of a micro displacement sensor with monolithic-integrated two-dimensionally distributed photodiodes
465
Development of a micro force sensor for conduit guided wire and its application to micro master-slave systems
466
Development of a micro lancet needle made of biodegradable polymer for low-invasive medical treatment
467
Development of a micro manipulator using a microgripper and PZT actuator for microscopic operations
468
Development of a micro manufacturing system and its efficiency evaluation method
469
Development of a micro mobile robot in the abdominal cavity
470
Development of a micro positioning stage for lab on a chip applications
471
Development of a micro seismometer based on molecular electronic transducer technology for planetary exploration
472
Development of a Micro Self-Focusing Ultrasound Transducer for Treating Cervical Lesions
473
Development of a micro transfer arm for a microfactory
474
Development of a Micro Vertex Detector for the PANDA-Experiment at the FAIR Facility
475
Development of a microbicide-releasing diaphragm as an HIV prevention strategy
476
Development of a microcalorimeter for measurement of L X-rays emitted from transuranium elements
477
Development of a microcamera with embedded image processor using panel level packaging
478
Development of a microchannel plate based gated x-ray imager for imaging and spectroscopy experiments on z
479
Development of a microcomputer system for assessment of chronic compartment syndrome
480
Development of a microcontrolled bioinstrumentation system for active control of leg prostheses
481
Development of a microcontrolled data acquisition system to optimize INPE´s data collecting station, via satellite
482
Development of a microcontroller based electrical impedance tomography system
483
Development of a microcontroller-based automatic control system for the electrohydraulic total artificial heart
484
Development of a Microcontroller-Based Frequency Synthesizer cum Vector Voltmeter
485
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
486
Development of a Micro-diaphragm Pump with Piezoelectric Device
487
Development of a micro-electro-rnechanical deformable mirror for fiber laser emission modulation
488
Development of a Microfabricated Flat Interface Nerve Electrode Based on Liquid Crystal Polymer and Polynorbornene Multilayered Structures
489
Development of a Microfabricated Optical Bend Loss Sensor for Distributive Pressure Measurement
490
Development of a microfine active bending catheter equipped with MIF tactile sensors
491
Development of a microfluidic device with integrated high frequency ultrasound probe for particle characterization
492
Development of a microfluidic device with microcantilever sensor array for probing single cancer cells mechanics
493
Development of a microfluidic perfusion system for patch clamp recording
494
Development of a Microfluidic Sensing Platform by Integrating PCB Technology and Inkjet Printing Process
495
Development of a micro-generator based on Bi2Te3 thin films
496
Development of a micromachined pressure transducer for biomedical device/tissue interfaces
497
Development of a micromachined THz nanoklystron: a status report
498
Development of a Micro-Macro Neural Network to recognize rollover movement
499
Development of a micromanipulation mystem with force sensing
500
Development of a micromanipulation system for special applications in handling of microcomponents
501
Development of a micro-manipulation system having a two-fingered micro-hand
502
Development of a Micromechanical Grating Optical Modulator for Optical Network
503
Development of a Micro-mechanical Logic Inverter for Low Frequency MEMS Sensor Interfacing
504
Development of a Micromegas micro pattern charge readout device for use in two phase xenon dark matter detectors
505
Development of a micromirror based laser vector scanning automotive HUD
506
Development of a micromotions detection technique for 16 locations in bladder wall
507
Development of a micro-nozzle and ion mobility spectrometer in LTCC
508
Development of a microphotocantilever for near-field scanning optical microscopy
509
Development of a microprocessor controlled cryosurgical system
510
Development of a microprocessor interface to a scanning electron microscope
511
Development of a microprocessor-based four probe DC resistivity setup for Tc measurement of superconducting materials
512
Development of a micro-processor-based transient data recording system for load behavior analysis
513
Development of a microreactor for rapid analysis of chemical reaction kinetics with absorption specrtoscopy
514
Development of a microreactor for rapid analysis of chemical reaction kinetics.
515
Development of a Microscale Implantable Neural Interface (MINI) Probe System
516
Development of a microscopic traffic simulator for inter-vehicle communication application research
517
Development of a microspectrometer for the infrared range
518
Development of a microstrip array antenna for L-band radiometer
519
Development of a micro-strip resonator soil moisture sensor
520
Development of a microstructurally adaptive unified primary-cumsecondary creep model for SAC387 solder joints
521
Development of a microsurgery training system
522
Development of a microtribological tester with sliding condition of a small contact load and large velocity
523
Development of a microwave clothes dryer
524
Development of a microwave cusp accelerator driven by electron cyclotron resonance
525
Development of a microwave design program for undergraduate engineering
526
Development of a microwave displacement sensor for hydraulic devices
527
Development of a microwave enhanced bagasse hydrolysis process for ethanol production
528
Development of a microwave PHEMT device model
529
Development of a Microwave Proximity Sensor for Industrial Applications
530
Development of a microwave proximity sensor for industrial applications
531
Development of a microwave radiative transfer simulation tool for the NPOESS program
532
Development of a microwave receiving and transmission system using an optical modulator
533
Development of a Microwave—Accelerated Metal-Enhanced Fluorescence 40 Second, <100 cfu/mL Point of Care Assay for the Detection of Chlamydia Trachomatis
534
Development of a middleware for exploring practicality of IEEE 1451 protocol family
535
Development of a mid-infrared optical frequency synthesizer
536
Development of a mid-power core (35 kW) dedicated to inverters for aerospace applications
537
Development of a mid-size compound type hybrid electric excavator
538
Development of a millimeter and submillimeter wave ESR measurement system
539
Development of a millimeter wave magnetic resonance force microscopy probe
540
Development of a millimeter wave system-on-a-package utilizing MCM integration
541
Development of a millimeter-wave exposure setup for rabbit eyes
542
Development of a millimeter-wave ferrite-filled antisymmetrically biased rectangular waveguide phase shifter embedded in low-temperature cofired ceramic
543
Development of a Millimeter-Wave Measurement Setup and Dedicated Techniques to Characterize the Matching and Radiation Performance of Probe-Fed Antennas [Measurements Corner]
544
Development of a millimeter-wave system-on-a-package utilizing MCM integration
545
Development of a MIMO QFT CAD Package (Version 2)
546
Development of a MIMO Radar System demonstrator - Calibration and demonstration of first results
547
Development of a mind-controlled Android racing game using a brain computer interface (BCI)
548
Development of a mini gamma camera for prostate imaging
549
Development of a miniature axial-field spindle motor
550
Development of a miniature cold-cathode electron gun
551
Development of a miniature foil type ultrasonic motor
552
Development of a miniature gamma-ray endoscopic probe for tumor localization in nuclear medicine
553
Development of a miniature Joule-Thomson refrigerator using LTCC (Low Temperature Co-fired Ceramic) technique
554
Development of a miniature laser-cooled Cs fountain frequency standard at NIST
555
Development of a miniature microwave-multicusp plasma source as an electron neutralizer for space propulsion
556
Development of a miniature pair of eyes with camera for the humanoid robot Robota
557
Development of a miniature piezoelectric mixer
558
Development of a miniature pin-array tactile module using elastic and electromagnetic force for mobile devices
559
Development of a miniature plantar shear force sensing transducer
560
Development of a miniature pressure transducer for biomedical applications
561
Development of a miniature robot for hearing aid implantation
562
Development of a miniature self-stabilization jumping robot
563
Development of a miniature shear sensing transducer
564
Development of a Miniature Shear Sensor for Direct Comparison of Skin-Friction Drags
565
Development of a miniature surface mount system using injection molding pantograph mechanisms
566
Development of a miniature ultrasonic motor using a helical coil as a stator
567
Development of a miniature vacuum arc source as a space satellite thruster
568
Development of a Miniature Vertical Milling Machine for Automation Used in a Microfactory
569
Development of a miniature, low-cost wave measurement solution
570
Development of a Miniature, Sealed, Magnetic Circuit Breaker
571
Development of a miniaturised drug delivery system with wireless power transfer and communication
572
Development of a miniaturized 3-DOF force sensing instrument for robotically assisted retinal microsurgery and preliminary results
573
Development of a miniaturized bioreactor for neural culture and axon stretch growth
574
Development of a miniaturized Dynatron THz-Oscillator with a FEBIP system
575
Development of a miniaturized IV drip rate meter using optical sensors and fuzzy rule based detection algorithm
576
Development of a miniaturized laser Doppler velocimeter for use as a slip sensor for robot hand control
577
Development of a Miniaturized Liquid Core Waveguide System With Nanoporous Dielectric Cladding—A Potential Biosensing Platform
578
Development of a miniaturized model of a finger shaped tactile sensor using an optical waveguide
579
Development of a miniaturized NO2 gas sensor based on nanoparticles WO3 thin film on interdigitated electrodes
580
Development of a miniaturized piezoelectric ultrasonic transducer
581
Development of a mini-humanoid pianist
582
Development of a minimal İnflation pressure pneumatic tourniquet for extremity surgeries
583
Development of a minimal IEEE 1451.1 model for microcontroller implementation
584
Development of a minimalistic pneumatic quadruped robot for fast locomotion
585
Development of a minimally invasive microvascular ischemia monitor: analysis of noise and artifact components
586
Development of a minimally invasive microvascular ischemia monitor: clinical detection of ischemia
587
Development of a minimally invasive microvascular ischemia monitor: drift reduction results
588
Development of a minimally invasive microvascular ischemia monitor: noise and artifact extraction
589
Development of a minimally invasive Robotic Interventional Radiology for treatment of lung cancer -Manufacture of a basic mechanism and verification experiment-
590
Development of a minor program of study in Management of Technology
591
Development of a mist singlet oxygen generator for chemical oxygen iodine laser
592
Development of a mix-design based Rapid Chloride Permeability assessment model using neuronets
593
Development of a mixed MIMD-SIMD architecture using the AMT DAP
594
Development of a mixed signal LSI for tactile data processing
595
Development of a Mixed-Mode Pixel Array Detector for macromolecular crystallography
596
Development of a mixed-signal PFC control IC with fast dynamic response
597
Development of a MMIC chip set and a MMCM for cellular communication
598
Development of a Mobile Application Advertisement System That Lead a Health Care Function and the Advertisement
599
Development of a mobile application for customer data capture: A case of CIC insurance group limited
600
Development of a mobile application for home energy management in smart grids
601
Development of a mobile application for people with panic disorder as augmentation for an internet-based intervention
602
Development of a mobile application in augmented reality to improve the communication field of autistic children at a Neurorehabilitar Clinic
603
Development of a Mobile Arm Support (Armon): Design Evolution and Preliminary User Experience
604
Development of a mobile ecogenomic sensor
605
Development of a mobile e-Health care system for rapid detection of emergent situations
606
Development of a Mobile Health Architecture to Prevent Childhood Obesity
607
Development of a mobile inverted pendulum robot system as a personal transportation vehicle with two driving modes :TransBOT
608
Development of a mobile learning framework for an analog electronics course
609
Development of a mobile mapping system for use in emergency gas line maintenance vehicles
610
Development of a mobile phone based beat-by-beat sphygmomanometer
611
Development of a mobile phone based ophthalmoscope for telemedicine
612
Development of a Mobile Platform for Security Robot
613
Development of a Mobile Platform to Support Building Maintenance Engineering
614
Development of a mobile robot controlled by three motors for hostile environment
615
Development of a mobile robot controller based on PC and PLC
616
Development of a mobile robot for transmission line
617
Development of a mobile robot for visually guided handling of material
618
Development of a mobile robot moving on a handrail —Control for preceding a person keeping a distance
619
Development of a mobile robot to study the collective behavior of zebrafish
620
Development of a mobile robot which embodies a remote instructor
621
Development of a mobile robotic platform for the underground distribution lines
622
Development of a mobile spreadsheet-based PID control simulation system
623
Development of a mobile surveillance robot
624
Development of a Mobile Two-Wheel Balancing Platform for Autonomous Applications
625
Development of a Mobile Video Learning System for Cellular Phone
626
Development of a mobile wind laboratory for teaching purposes in emerging countries
627
Development of a mobility assist for the paralyzed, amputee, and spastic patient
628
Development of a mobility management simulator for 3G cellular network
629
Development of a modal analysis accelerometer based on a tunneling displacement transducer
630
Development of a mode stirred EMC facility
631
Development of a model based efficiency optimization for IPMSM drive
632
Development of a Model for a Microwave GaInP/GaAs HBT
633
Development of a model for an air brake system with leaks
634
Development of a Model for Control of the NASA CELSS Crop Growth Research Chamber
635
Development of a Model for Flipped Classroom Supported by PLS: A Case Study
636
Development of a model for photovoltaic arrays suitable for use in simulation studies of solar energy conversion systems
637
Development of a model for predicting flicker from electric arc furnaces
638
Development of a model for representing dynamic behaviour of synchronous motor variable speed drives
639
Development of a model for short-term load forecasting with neural networks and its application to the electrical Spanish market
640
Development of a model for testing to reduce the spatial separation requirements of IEEE standard 384 for physical independence
641
Development of a model for the potential distribution on a spherical intracardiac catheter within a three compartment ellipsoidal ventricle
642
Development of a model for the simulation of a clean-coal pressurized oxy-combustion plant
643
Development of a Model for Voltage Degradation of Various Dielectric Materials
644
Development of a model of an X-ray tube transmission source
645
Development of a model of decision support for optimization of physical flows in a container terminal
646
Development of a model of the infarcted canine heart that predicts arrhythmia generation from specific cardiac geometry and scar distribution
647
Development of a Model Osseo-Magnetic Link for Intuitive Rotational Control of Upper-Limb Prostheses
648
Development of a Model Output Statistic and implementation of an operational solar photovoltaic energy forecast model based in WRF
649
Development Of A Model Rehabilitation Engineering Program
650
Development of a MODEL superconducting helical undulator for the ILC positron source
651
Development of a model to describe the stiffness of an electric motor lamination stack
652
Development of a model-based controller prototype for a PEM fuel cell engine with ASCET-MD
653
Development of a Model-Based Dynamic Recurrent Neural Network for Modeling Nonlinear Systems
654
Development of a model-based inference approach to detect malfunctioned components in biological systems from clinical data
655
Development of a Model-Based Nested Controller for Electrohydraulic Servos
656
Development of a model-based remote maintenance robot system. II. Environment measuring methods
657
Development of a model-based remote maintenance robot system. III. Task planner
658
Development of a model-free clutter description based on a coherency matrix formulation
659
Development of a modeling framework for Future Internet enterprise systems
660
Development of a Modeling Method for Monitoring Tunnel Deformation Based on Active Panoramic Vision Technology
661
Development of a modeling platform for 4.5 kV IGBT power modules
662
Development of a moderate rate lithium/thionyl-chloride `D´ cell
663
Development of a Modern Amplidyne Voltage Regulator for Large Turbine Generators [includes discussion]
664
Development of a modern biosystems based undergraduate bioengineering program at Binghamton
665
Development of a Modern Communication Laboratory
666
Development of a Modern Pressurized Water Reactor Simulator: Instrumentation, Design and Data Acquisition
667
Development of a modern telecommunications infrastructure in the new federal states in eastern Germany
668
Development of a modern training system for converter-fed electrical drives in an automation compound
669
Development of a Modern Watt-Hour Meter
670
Development of a modern watt-hour meter
671
Development of a modern watt-hour meter
672
Development of a modified superconducting magnet for Maglev vehicles
673
Development of a MODIS direct broadcast reception and processing system
674
Development of a modular acoustic velocity sensor
675
Development of a modular and upgradeable fast kicker magnet system for the Duke Storage Ring
676
Development of a modular anthropomorphic robot hand using servohydraulic actuators
677
Development of a modular command and data handling architecture for the KySat-2 CubeSat
678
Development of a modular configurable multi-megawatt power amplifier
679
Development of a modular detector system for C-SPECT
680
Development of a modular docking sub-system for 12" class autonomous underwater vehicles
681
Development of a modular electromagnetic launcher system for the air force armament laboratory
682
Development of a modular general purpose controller board for biologically inspired robot
683
Development of a modular high-power converter system for battery energy storage systems
684
Development of a modular inertial sensor package and its application for improvement of handheld grenade launcher
685
Development of a modular linear magnetic gear as a project in the electrical engineering education
686
Development of a modular master-slave instrument cluster
687
Development of a Modular Mobile Robot Platform: Applications in Motion-Control Education
688
Development of a modular on-orbit serviceable satellite architecture
689
Development of a modular simulation system for power electronics and control applications
690
Development of a Modulation Strategy for a PWM Inverter Drive
691
Development of a modulator pulse stability measurement device and test results at SLAC
692
Development of a module based platform for mobile robots
693
Development of a module integrated photovoltaic monitoring system
694
Development of a MOEMS sun sensor for space applications
695
Development of a mold resin for molded transformers and its mechanical and insulating characteristics
696
Development of a Monitoring and Control Platform for Honeycomb Ceramics Resistance Test
697
Development of a monitoring system for evaluation of the mental health program in the city of Santarém, State of Pará, Brazil
698
Development of a monitoring system for honeybee activities
699
Development of a Monitoring System for Multichannel Cables Using TDR
700
Development of a monitoring system for physical frailty in independent elderly
701
Development of a monitoring system to improve ampacity in 138kV transmission lines using photonic technology
702
Development of a monochromatic X-ray source
703
Development of a monoclonal antibody that is specific for the Rabies virus phosphoprotein
704
Development of a Monolithic Active Pixel Sensor Using SOI Technology With a Thick Device Layer
705
Development of a monolithic constant fraction discriminator
706
Development of a monolithic constant fraction discriminator
707
Development of a monolithic FET Ka-band single side band upconverter and image reject downconverter
708
Development of a Monolithic PMMA Comb-Drive Micro Actuator Utilizing Hot Embossing and Ultra-Precision Machining
709
Development of a monolithic, programmable SAW filter in silicon
710
Development of A Monopulse Radar System
711
Development of a Monte Carlo simulation for APD based PET detectors using continuous scintillation crystal
712
Development of a Monte Carlo Simulation for APD-Based PET Detectors Using a Continuous Scintillating Crystal
713
Development of a Monte Carlo simulation to study linear radiation position sensitive detectors
714
Development of a Monte Carlo Simulator for the Astro-E2 Hard X-Ray Detector (HXD-II)
715
Development of a monte carlo simulator for the Astro-E2 hard X-ray detector (HXD-II)
716
Development of a Morph Analyser for Nepali noun token
717
Development of a MOS estimation model for G.729 using listening-opinion tests with Thai speech referring to packet loss effects
718
Development of a MOT-based continuous cold Cs-beam atomic clock
719
Development of a mote for horticulture based on the SDI-12 standard
720
Development of a motion analysis system and human-machine interaction through digital image processing and virtual reality
721
Development of a motion capture system based on uncalibrated cameras
722
Development of a motion capture system that uses alternating field
723
Development of a Motion Control Fault Detector for a Series Hybrid Vehicle
724
Development of a motion control method for a towed vehicle with a long cable
725
Development of a motion correction system for respiratory-gated PET study
726
Development of a motion detecting system for respiratory-gated PET using laser optical displacement sensor
727
Development of a motion planning system for an agricultural mobile robot
728
Development of a motion support system by using an electromyogram - signal processing of an electromyogram to estimate the biomechanical characteristics of joints
729
Development of a motion system for a training simulator based on Stewart platform
730
Development of a Motion Teaching System Using an Immersive Projection Display and a Haptic Interface
731
Development of a motion training support system for hemiplegic upper extremity
732
Development of a motor-driven powertrain for hydraulic lift system of aerial work platform
733
Development of a Motorized Device for Quantitative Investigation of Articulated AFO Misalignment
734
Development of a Motorway Simulator for Vehicular Multimedia Communications
735
Development of a Mouse Biomagnetic Measurement System by Using a High- T_{\\rm C} SQUID Magnetometer
736
Development of a mouse-shaped haptic device with multiple finger inputs
737
Development of a mouth-mouse for quadriplegics
738
Development of a movable collimator with low beam impedance
739
Development of a Movable HTS SMES System
740
Development of a movable plunger tuner for the high-power RF cavity for the PEP-II B factory
741
Development of a movable RF screening wall for the DSTO Combined Mode Chamber
742
Development of a Movable Service Robot with Double Working Arms for the Elderly and the Disabled
743
Development of a Moving Magnetic Flux Type sensor Using Shading Coils for Ect
744
Development of a moving magnetic flux type sensor using shading coils for ECT
745
Development of a MPPC-based DOI-PET module with submillimeter 3-D resolution
746
Development of a MPPT controller for hybrid wind/photovoltaic system based on SOPC and NIOS II
747
Development of a MPPT method for photovoltaic systems
748
Development of a MR compatible brain PET II using 4-side tileable GAPD arrays
749
Development of a MR-compatible cable-driven manipulator: Design and technological issues
750
Development of a multi — Electrode electrical stimulation device to improve chronic wound healing
751
Development of a multi level data generation application for GEMSOS
752
Development of a multi magnetic property member for permanent magnet motor
753
Development of a multi-agent information management system for Iran power industry. A case study
754
Development of a multiagent robotic system with application to space exploration
755
Development of a multiagent system for identification and control
756
Development of a multi-agent system for robot soccer game
757
Development of a Multi-Agent System for Travel Industry Support
758
Development of a multiattribute value function for long-range electrical generation expansion
759
Development of a multi-AUV SLAM testbed at the University of Michigan
760
Development of a multi-behavior based mobile robot for remote supervisory control through the Internet
761
Development of a multibody computational model of the lumbar spine with simulink
762
Development of a multi-channel 2/spl times/2 optical switch
763
Development of a multichannel data system
764
Development of a multichannel fiber-to-fiber optical connector for the D0 upgrade tracker
765
Development of a multichannel fiber-to-fiber optical connector for the DO upgrade tracker
766
Development of a multi-channel immunosensor for determnination of serum hepatic fibrosis markers
767
Development of a multichannel implantable connector
768
Development of a multichannel lock-in amplifier for Terahertz time-domain systems
769
Development of a Multichannel PAM Telephone Transmission System
770
Development of a multi-channel PC-based hard disk drive Bode-plot generator
771
Development of a Multi-channel System for Intrinsic Cardiac Neural Recording
772
Development of a multichannel taste sensor chip for a portable taste sensor
773
Development of a Multi-Channel Telemetry System with 256 Data Channels
774
Development of a Multi-Channel Telemetry System with 256 Data Channels
775
Development of a multichannel temperature and humidity monitoring device
776
Development of a multichannel ultrasonic interferometer for the measurements under high pressures and its application to biomolecular studies
777
Development of a multichannel vector network analyzer for "In Situ" measurement of radar antennas
778
Development of a Multichannel Vestibular Prosthesis Prototype by Modification of a Commercially Available Cochlear Implant
779
Development of a multi-channel waveform-sampling front-end ASIC and DOI detector for APD based animal PET
780
Development of a Multi-channel, Portable Optical Topography System
781
Development of a Multi-characteristic Distance Relay
782
Development of a multichip module DSP
783
Development of a Multicoil Medium-Sized Superconducting Magnet With Zero-Vapor LHe
784
Development of a multi-component CAD model of human elbow structure
785
Development of a multicore power system simulator for ship systems
786
Development of a Multi-Dimensional SVD based Technique for Multi-Receivers Ultrasound used in Bone Status Characterization
787
Development of a multidisciplinary design course via NASA´s Human-Powered Lunar Rover Design Competition
788
Development of a multi-disciplinary framework for studying generation of new product concepts
789
Development of a multidisciplinary hands-on training test-bench for an Electronic Engineering master
790
Development of a multidisciplinary, laboratory-based curriculum on the properties and processing of electronic materials and devices
791
Development of a Multi-DOF Anthropomorphic Prosthetic Hand
792
Development of a multi-DOF exoskeleton based machine for injured fingers
793
Development of a Multi-DOF Robotic Controller for Academic Purposes
794
Development of a multi-drive submersible platform for deep seabed research
795
Development of a Multi-Energy CT for Small Animals: Characterization of the Quasi-Monochromatic X-Ray Source
796
Development of a multi-energy CT for small animals: Characterization of the quasi-monochromatic X-ray source
797
Development of a Multifilament PIT {\\rm V}_{3}{\\rm Ga} Conductor for Fusion Applications
798
Development of a multi-fingered robot hand with fingertip tactile sensors
799
Development of a multifingered robotic hand
800
Development of a multifingered robotic human upper limb as an inverse haptic interface
801
Development of a multi-frequency airborne radar instrumentation package for ice sheet mapping and imaging
802
Development of a multi-frequency airborne radar instrumentation package for ice sheet mapping and imaging
803
Development of a multi-frequency system for medical applications of focused electrical impedance method (FIM) appropriate for developing countries
804
Development of a Multifunctional Cosmetic Prosthetic Hand
805
Development of a multifunctional electric power storage device [News from Japan]
806
Development of a multifunctional multiphase DC/DC-converter for traction battery coupling with integrated charging function
807
Development of a multifunctional platform for extra- and intracellular ionic activities recording
808
Development of a multifunctional robot end- effector system for automated manufacture of textile preforms
809
Development of a multifunctional robotic arm for in-pipe robots
810
Development of a Multi-Funiction Signal Generator Based on STM32 with High Performance
811
Development of a multi-granularity design support system using hierarchical clustering for non-dominated solutions
812
Development of a multigrid FDTD code for three-dimensional applications
813
Development of a multi-grid type microstrip gas chamber
814
Development of a multigrid-type microstrip gas chamber
815
Development of a multi-layer genetic algorithm for maintenance scheduling in power systems
816
Development of a Multilayer Hierarchical Scheduling Algorithm for Manufacturing Systems with Identical Machines
817
Development of a multi-layer neural network for incomplete data set of environmental problems
818
Development of a multilayer organic packaging technique for a fully embedded T/R module
819
Development of a multi-layer SU-8 process for terahertz frequency waveguide blocks
820
Development of a multi-leg type micro rescue robot for disaster victim search
821
Development of a multi-level repulsive force out-of-plane micro electrostatic actuator
822
Development of a multi-line laser sensor based robotic 3D measurement system
823
Development of a multilingual text mining approach for knowledge discovery in patents
824
Development of a multi-linked tracked jack robot
825
Development of a Multimagnetic Property Member for Permanent Magnet Motor
826
Development of a multi-media based teaching programme to support a first year electronic engineering teaching laboratory
827
Development of a multimedia document management system for cooperative work environment
828
Development of a multimedia interactive system for virtual heart animation based on phono-electrocardiography for educational purposes
829
Development of a multimedia mobile processor
830
Development of a Multimedia Stream Cipher Engine
831
Development of a Multimedia-Based Vehicle Lane Departure Warning, Forward Collision Warning and Event Video Recorder Systems
832
Development of a multi-megawatt circulator for X-band
833
Development of a multi-megawatt circulator for X-Band
834
Development of a multimodal biofeedback system for balance training
835
Development of a multi-modal haptic feedback system for dexterous robotic telemanipulation
836
Development of a multimodal monitoring platform for medical research
837
Development of a Multi-modal Sensor for in vivo Monitoring of Tumor Oxygen Dynamics
838
Development of a multi-modal tissue diagnostic system combining high frequency ultrasound and photoacoustic imaging with lifetime fluorescence spectroscopy
839
Development of a multi-modal, flexible tactile sensing skin using polymer micromachining
840
Development of a multimode navigation system for an assistive robotics project
841
Development of a multi-mode self-adaptive traffic shaping algorithm for an efficient wireless network
842
Development of a Multi-motor Transmission and Control System of Latest-Twisting Machine Based on PCI Bus
843
Development of a multi-nozzle bioprinting system for 3D tissue structure fabrication
844
Development of a multi-nutrient fertilizer from liquid waste of solar salt manufacturing process
845
Development of a multiparametric handheld biosensor for use in mobile applications
846
Development of a multi-pinhole brain SPECT system with CdZnTe semiconductor detectors
847
Development of a multi-pinhole detector for high-sensitivity SPECT imaging
848
Development of a multi-pitch unequal-turn-coil wound rotor for the brushless doubly-fed generator
849
Development of a multipixel hybrid photodetector with high quantum efficiency and gain
850
Development of a multi-pixel hybrid photodetector with high quantum efficiency and gain
851
Development of a Multi-Pixel Photon Counter Module for Positron Emission Tomography
852
Development of a Multiplayer Online Game-Based Learning System Based on ARCS Motivation Model
853
Development of a Multiplayer Online Role-Playing Game-based Learning System for Multiple Curriculums
854
Development of a multiple adjustment processor for generation of DEMs over large areas using SAR data
855
Development of a Multiple Mobile Robotic System for Team Work
856
Development of a multiple output resonant converter for space applications
857
Development of a multiple parallel link rotor for flying robots
858
Development of a multiple regression equation to predict judo performance with the help of selected structural and body composition variables
859
Development of a Multiple Row Pre-Angled MT Low Loss Connector
860
Development of a multiple series-connected IGBT converter for large-capacity STATCOM
861
Development of a multiple stage depressed collector system for 1 MW CW gyrotrons
862
Development of a multiple stage depressed collector system for 2 MW CW gyrotrons
863
Development of a multiple thin-film semimicro DC-probe for intracerebral recordings (during surgery)
864
Development of a Multiple User Quiz System on a Shared Display
865
Development of a multiple-choice MATLAB theory and syntax exam
866
Development of a multiple-frequency gyrotron, gyrotron FU CW GV
867
Development of a multiple-row MT connector for 80 µm diameter optical fibers
868
Development of a Multi-point Multi-parametric Sensor for Structural Health Monitoring
869
Development of a multiprocessor architecture for efficient processing allocation in electronic musical instruments
870
Development of a multi-purpose display and a timer for athletics
871
Development of a multi-purpose portable electrical UAV system, fixed & rotative wing
872
Development of a multipurpose tactical surveillance system using UAV´s
873
Development of a multi-purpose wireless network for the structural health monitoring of a suspension bridge
874
Development of a multi-purpose, pulsed-laser system for solar cell processing applications
875
Development of a multi-resolution parallel genetic algorithm for autonomous robotic path planning
876
Development of a multiresolution time domain EMI measurement system that fulfills CISPR 16-1
877
Development of a Multisegment Coal Mill Model Using an Evolutionary Computation Technique
878
Development of a multi-segmented linear Paul trap and reduction of ion micromotion towards quantum-state manipulation
879
Development of a multi-sensor perceptual system for mobile robot and EKF-based localization
880
Development of a multisensor road surveying measurement system
881
Development of a multisensor-based residual power prediction system for mobile robots
882
Development of a Multi-Shaped Beam Antenna in C-Band
883
Development of a multi-source solar simulator for spatial uniformity and close spectral matching to AM0 and AM1.5
884
Development of a multi-source visualization prototype
885
Development of a multispectral imaging system for apple firmness prediction
886
Development of a multispectral polarimeter dedicated to aerosol characterization - preliminary results
887
Development of a multispectral tissue characterization system for optimization of an implantable perfusion status monitor for transplanted liver
888
Development of a multi-spiral gripper for leather industry
889
Development of a multistage current-controlled switched-capacitor step-down DC/DC converter with continuous input current
890
Development of a Multistep Parallel-Plate Chamber as Time Projection Chamber End-Cap or Vertex Detector
891
Development of a multi-switch input controller of the electronic devices for the motor-disabled-person
892
Development of a multi-target tracking system for paramecia
893
Development of a multitasking mobile robot for the construction of educational robotics kits
894
Development of a multi-telerobot system for remote collaboration
895
Development of a multi-temperature calibration method for measuring dielectric properties of food
896
Development of a multi-terawatt few cycle optical parametric chirped pulse amplifier
897
Development of a multi-terminal crimp package for smart textile integration
898
Development of a multi-touch table for natural user interface
899
Development of a Multi-train Operation Simulator with Interactive Human Computer Interfaces
900
Development of a multi-use construction engineering and management classroom/laboratory
901
Development of a multiuser and multimedia game engine based on TCP/IP
902
Development of a multi-user electronic conference system DEMPO III for supporting new ideas
903
Development of a multivariable control system on an experimental platform dedicated to the study of fouling phenomena
904
Development of a multivariable test facility for the evaluation of iterative learning controllers
905
Development of a Multi-viewpoint AR-Based Mobile Learning System for Supporting Lunar Observation
906
Development of a multi-year deep sea bottom pressure recorder
907
Development of a muscle spindle model
908
Development of a muscle suit for realizing all motion of the upper limb
909
Development of a Muscle Suit for the Upper Limb - Proposal of Posture Control Methods
910
Development of a Muscle Suit for the Upper Limb Motion Support A New Shoulder Mechanism and Posture Measurement
911
Development of a musculoskeletal model of the hind legs of the rat based on anatomical data and generation of locomotion based on kinematic data
912
Development of a MUSE-to-NTSC converter
913
Development Of A MUSE-to-NTSC Converter
914
Development of a MV IGBT based solid-state tap changer
915
Development of a myoelectric control scheme based on a time delayed neural network
916
Development of a myoelectric discrimination system for a multi-degree prosthetic hand
917
Development of a myoelectric joystick: A preliminary study
918
Development of a name translation system using CRAY T94
919
Development of a Nanohandling Robot Station for Nanocharacterization by an AFM Probe
920
Development of a nanoparticle time-temperature sensor for passive and active RFID
921
Development of a nano-positioning planar motion stage
922
Development of a Nanoprecision 3-DOF Vertical Positioning System With a Flexure Hinge
923
Development of a nanorobotic station for electrophysiology under nanomechanical stimulation
924
Development of a nanoscale directionally sensitive optical radiation sensor for guidance and control of nanorobotic space exploration systems -the VCELL
925
Development of a nanosecond high energy KTA OPO system operating 2.9 /spl mu/m
926
Development of a natural cooled axial flux permanent magnet generator for wind turbine
927
Development of a natural ester liquid with significantly enhanced dielectric characteristics
928
Development of a naval railgun
929
Development of a naval railgun
930
Development of a Navigation System for Mobile Robots Using Different Patterns of Behavior Based on Fuzzy Logic
931
Development of a navigation system for semi-autonomous operation of wheelchairs
932
Development of a navigation system for the blinds
933
Development of a navigation system for the SnowEater robot
934
Development of a navigation system for visually impaired persons by using optical beacons
935
Development of a navy dental epidemiology information system
936
Development of a Nb/sub 3/Sn superconducting strand with tie-processed Nb surface coating to limit inter-strand eddy currents in cables
937
Development of a Nb3Sn composite conductor with very fine filaments and basic studies on its power frequency applications
938
Development of a Nb3Al conductor for toroidal field coils
939
Development of a Nb3Sn conductor containing Ga and Mg dopants
940
Development of a Nb3Sn quadrupole magnet model
941
Development of a NCT probing system for SINCGARS radio systems
942
Development of a NDT toolbox dedicated to the conservation of wall paintings: Application to the frescoes chapel in the Charterhouse of Villeneuve-lez-Avignon (France)
943
Development of a near lossless image compression technique using mixed transforms
944
Development of a near-dead-ended fuel cell stack operation in an automotive drive system
945
Development of a needle insertion end-effector for interventional radiology
946
Development of a need-oriented steam turbine cycle simulation toolbox
947
Development of a negative pressure based active lung simulator
948
Development of a nerve model of eyeball motion nerves to simulate the disorders of eyeball movements for neurologic examination training
949
Development of a network application-based notetaking support system
950
Development of a network distributed telecare robotic system using CORBA
951
Development of a network FES system for stroke rehabilitation
952
Development of a network model for the total health care management on multi-vendor environment
953
Development of a network system combined with ambulatory and non-conscious physiological measurements for supporting challenged kids -A new proposal of a gait monitoring system for use in rehabilitation
954
Development of a network/multimedia projector system
955
Development of a Network-Based Method for Unmixing of Hyperspectral Data
956
Development of a Network-based Real-Time Robot Control System over IEEE 1394: Using Open Source Software Platform
957
Development of a network-based simulation system for protective relaying algorithms
958
Development of a network-based: Intrusion Prevention System using a Data Mining approach
959
Development of a networked and sensorized environment
960
Development of a Networked Blood Pressure Monitoring System
961
Development of a networked control system platform for unmanned aerial vehicles
962
Development of a Networked Robotic System for Disaster Mitigation, -Navigation System based on 3D Geometry Acquisition
963
Development of a network-enabled traffic light system
964
Development of a networking education portal for secondary education communities in Malaysia
965
Development of a Network-Wide Harmonic Control Scheme Using an Active Filter
966
Development of a neural approach for bias-dependent scalable small-signal equivalent circuit modeling of GaAs HEMTs
967
Development of a neural classifier with genetic algorithm for structural vibration suppression
968
Development of a neural controller applied in a 5 DOF robot redundant
969
Development of a neural controller for motion control of a piezoelectric three-legged micromanipulation robot
970
Development of a neural network algorithm for unsupervised competitive learning
971
Development of a neural network based algorithm for radar snowfall estimation
972
Development of a neural network based algorithm for rainfall estimation from radar observations
973
Development of a neural network based saturation model for synchronous generator analysis
974
Development of a neural network based surface roughness prediction system using cutting parameters and an accelerometer in turning
975
Development of a neural network based virtual sensor for automatic transmission slip
976
Development of a neural network building tool for pattern clustering/classification
977
Development of a neural network derived index for early detection of prostate cancer
978
Development of a neural network for precipitable water vapor retrieval over ocean and land
979
Development Of A Neural Network Model Based Controller For A Non-linear Process Application
980
Development of a Neural Network Model for Controlling Horizontal Saccadic Eye Movements
981
Development of a neural network Predictive Emission Monitoring System for flue gas measurement
982
Development of a neural probe to measure potassium during a cortical spreading depression in-vivo
983
Development of a Neural-Net Based Decision Support System of Mattress Patterns
984
Development of a Neurocognitive Remediation System by Virtual Reality
985
Development of a neuro-fuzzy controller for induction motor
986
Development of a neuro-fuzzy integrating multi-tendency indices system for countering driver fatigue
987
Development of a neuro-fuzzy system for structural vibration suppression
988
Development of a neuromorphic computing system
989
Development of a Neuron Based Internet Game Driven by a Brain-Computer Interface System
990
Development of a neuron chip based smart embedded fuzzy logic controller with intelligent control strategies for process control
991
Development of a neuroprosthesis for restoring arm and hand function via functional electrical stimulation following high cervical spinal cord injury
992
Development of a neuroprosthesis for restoring arm and hand function via functional electrical stimulation following high cervical spinal cord injury
993
Development of a neutral strontium lattice trap optical clock at the National Physical Laboratory
994
Development of a neutron flux monitor using a small scintillator coupled with quartz fiber for a Cyclotron-Based Boron Neutron Capture Therapy
995
Development of a neutron imaging detector based on the μPIC micro-pixel gaseous chamber
996
Development of a neutron imaging facility at the CENM Al Maâmora TRIGA
997
Development of a neutron imaging facility at the University of Texas TRIGA reactor
998
Development of a Neutron Scatter Camera for Fission Neutrons
999
Development of a neutron tagger module using a digital pulse shape discrimination method
1000
Development of a neutron-sensitive anger camera for neutron scattering instruments