بر اساس عنوان

1
Modelling of the age hardening behaviour of Al–Mg–Si alloys Original Research Article
2
Modelling of the agglomeration in suspension process with multidimensional kernels
3
Modelling of the April 5, 2003, Stromboli (Italy) paroxysmal eruption from the inversion of broadband seismic data
4
Modelling of the association mechanism of a series of rodenticide molecules with lipid membrane investigated by computational chemistry and biochromatography Original Research Article
5
Modelling of the atomization of a plain liquid fuel jet in crossflow at gas turbine conditions
6
Modelling of the auto-ignition angle in diesel HCCI engines through D-optimal design
7
Modelling of the available latent heat of a CO2 hydrate slurry in an experimental loop applied to secondary refrigeration
8
Modelling of the batch treatment of wet granular solids with superheated steam in fluidized beds
9
Modelling of the bedrock response to glacial loading at the Olkiluoto site, Finland
10
Modelling of the behaviour of gas-solid two-phase mixtures flowing through packed beds
11
Modelling of the behaviour of seismically strengthened masonry walls subjected to cyclic in-plane shear
12
Modelling of the bioleaching of sulphide ores: application for the simulation of the bioleaching/gravity section of the Kasese Cobalt Company Ltd process plant
13
Modelling of the bond–slip behavior in FRP reinforced masonry
14
Modelling of the borehole filling of double U-pipe heat exchangers
15
Modelling of the bottom water flow through the Romanche Fracture Zone with a primitive equation model––Part 2: Comparison of vertical mixing parameterisations with observations
16
Modelling of the break up mechanism in gas atomization of liquid metals Part II. The gas flow model
17
Modelling of the break up mechanism in gas atomization of liquid metals. Part I: The surface wave formation model
18
Modelling of the canopy conductance of potted cherry trees based on an artificial neural network
19
Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verification
20
Modelling of the cation binding properties of fulvic acids: an extension of the RANDOM algorithm to include nitrogen and sulphur donor sites
21
Modelling of the CCK antagonist activity of benzodiazepines on gastrin receptors
22
Modelling of the change in national exchange rate model depending on the economic parameters of a natural gas cogeneration system: Turkey case
23
Modelling of the coefficient of performance of an air-cooled screw chiller with variable speed condenser fans
24
Modelling of the combined late-winter ice cap edge and slope winds in Mars Hellas and Argyre regions
25
Modelling of the combustion process and NOx emission in a utility boiler
26
Modelling of the compression behaviour of metallic hollow-sphere structures: About the influence of their architecture and their constitutive material’s equations
27
Modelling of the concentration polarization of the bivalents salts using a Nanomax50 membrane in nanofiltration process Original Research Article
28
Modelling of the conductive heat transfer through nano-structured porous silica materials
29
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
30
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
31
Modelling of the conversion of weak organic acids by bipolar membrane electrodialysis Original Research Article
32
Modelling of the coolant flow with heat flow controlled temperature sources in thermal networks [in induction motors]
33
Modelling of the crack growth initiation in viscoelastic media by the Gθv-integral
34
Modelling of the Current Density Distributions during Cortical Electric Stimulation for Neuropathic Pain Treatment
35
Modelling of the cutting tool stresses in machining of Inconel 718 using artificial neural networks
36
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
37
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
38
Modelling of the deformation process under thermo-mechanical fatigue conditions
39
Modelling of the deposition of retardant in a tree crown during fire fighting
40
Modelling of the dispersion and deposition of coarse particulate matter under neutral atmospheric conditions
41
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
42
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
43
Modelling of the dynamic behaviour of profiled composite floors
44
MODELLING OF THE DYNAMIC LOAD PLATE TEST WITH THE LIGHT FALLING WEIGHT DEVICE
45
Modelling of the dynamic threshold MOSFET
46
Modelling of the dynamic tool–chip interface in metal cutting
47
MODELLING OF THE DYNAMICS OF A DROPLET USING THE LATTICE BOLTZMANN METHOD
48
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method
49
Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading
50
Modelling of the effect of dislocation channel on intergranular microcrack nucleation in pre-irradiated austenitic stainless steels during low strain rate tensile loading
51
Modelling of the effect of dry periods on yielding of spring barley
52
Modelling of the effect of friction on cold strip rolling
53
Modelling of the effect of precipitates on work-hardening, ductility and impact behaviour of ferritic–martensitic Cr steels
54
Modelling of the effect of solute structure and mobile phase pH and composition on the retention of phenoxy acid herbicides in reversed-phase high-performance liquid chromatography Original Research Article
55
Modelling of the effectiveness of bicycle helmets under impact
56
Modelling of the effectiveness of bicycle helmets under impact
57
Modelling of the effectiveness of bicycle helmets under impact
58
Modelling of the effects of welding conditions on dilution of stainless steel claddings produced by gas metal arc welding procedures
59
Modelling of the elasto-viscoplastic damage behaviour of glassy polymers
60
Modelling of the Electric Field Distribution in Deep Transcranial Magnetic Stimulation in the Adolescence, in the Adulthood, and in the Old Age
61
Modelling of the electrochemical machining process by the boundary element method
62
Modelling of the elution behaviour in hybrid micellar eluents with different organic modifiers Original Research Article
63
Modelling of the energy absorption by polymer composites upon ballistic impact
64
Modelling of the enzymatic synthesis of taste dipeptides with simultaneous extraction in a membrane phase contactor Original Research Article
65
Modelling of the equilibrium properties of the system H3PO4–H2O: representation of VLE and liquid phase composition
66
Modelling of the evolution of crack of nanoscale in iron
67
Modelling of the evolution of micro-grain misorientations during creep of tempered martensite ferritic steels
68
Modelling of the excitation and the propagation of nerve impulses by natural and artificial stimulations Original Research Article
69
Modelling of the fate of selected endocrine disruptors in a municipal wastewater treatment plant in South East Queensland, Australia Original Research Article
70
Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties
71
Modelling of the field emission microtriode with emitter covered with porous silicon
72
Modelling of the film thickness effecton the carrier’s mobility in polysilicon thin film transistors
73
Modelling of the fin type heat exchanger for the HTS current leads of W7-X and JT-60SA Original Research Article
74
Modelling of the finned convection section of a biomass boiler
75
Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion
76
Modelling of the flooding in the Okavango Delta, Botswana, using a hybrid reservoir-GIS model
77
Modelling of the flow at the rotor disc in a geothermal turbine of 110 MW
78
Modelling of the flow behavior of activated carbon cloths using a neural network approach
79
Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation
80
Modelling of the formation conditions of structure-H hydrates
81
Modelling of the Forming Limit Band –A new Method to Increase the Robustness in the Simulation of Sheet Metal Forming Processes
82
Modelling of the Frame “Russia” In the French Newspaper Discourse
83
Modelling of the fuel mechanical behavior: from creep laws to internal variable models Original Research Article
84
Modelling of the gas to fuel droplets radiative exchange
85
Modelling of the grain growth and the densification of SnO2-based ceramics
86
Modelling of the grain size probability distribution in polycrystalline nanomaterials
87
Modelling of the growth of populations of Listeria monocytogenes and a bacteriocin-producing strain ofLactobacillus in pure and mixed cultures Original Research Article
88
Modelling of the growth/no growth interface of Wallemia sebi and Eurotium herbariorum as a function of pH, aw and ethanol concentration
89
Modelling of the growth–no growth interface of Issatchenkia occidentalis, an olive spoiling yeast, as a function of the culture media, NaCl, citric and sorbic acid concentrations: Study of its inactivation in the no growth region
90
Modelling of the hamstring muscle group by use of fractional derivatives
91
Modelling of the hardness of electroplated nickel coatings on copper substrates
92
Modelling of the heat exchangers of a small capacity, hot water driven, air-cooled H2O–LiBr absorption cooling machine
93
Modelling of the heat input for face-milling processes
94
Modelling of the heat transfer of transport rollers in kilns
95
Modelling of the HFR-EU1BIS experiment and thermomechanical evaluation Original Research Article
96
Modelling of the high pressure–temperature effects on naringin hydrolysis based on response surface methodology
97
Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network
98
Modelling of the humidity effect on the barrier height in SnO2 varistors
99
Modelling of the hydrogen distribution at a crack tip
100
Modelling of the hydrogen distribution at a crack tip
101
Modelling of the hydro-mechanical response of sedimentary rocks of southern Ontario to past glaciations
102
Modelling of the hygroelastic behaviour of a wood-based composite for construction
103
Modelling of the hysteresis effect of target voltage in reactive magnetron sputtering process by using neural networks
104
Modelling of the impact of air shock wave on obstacle covered by porous screen
105
Modelling of the implantation and the annealing stages of 800 keV 3He implanted tungsten: Formation of nanovoids in the near surface region
106
Modelling of the indentation response of coatings and surface treatments
107
Modelling of the individual and combined effects of water activity and temperature on the radial growth of Aspergillus flavus and A. parasiticus on corn Original Research Article
108
Modelling of the inelastic behavior of powder based AlFe9V1Si2 alloy with intermetallic phase
109
Modelling of the influence of aerosol processes for the dispersion of vehicular exhaust plumes in street environment
110
Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids Original Research Article
111
Modelling of the initial stages of the electropolymerization mechanism of o-phenylenediamine
112
Modelling of the interaction between phase transformation and precipitation: Coupled kinetics in microalloyed multiphase steels
113
Modelling of the interaction of lower and higher modes in two-dimensional MHD-equations Original Research Article
114
Modelling of the interface between a thin film and a substrate within a strain gradient plasticity framework
115
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
116
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
117
Modelling of the interline power flow controller and the generalised unified power flow controller in Newton power flow
118
Modelling of the internal stress in dislocation cell structures
119
Modelling of the investment casting process
120
Modelling of the ion-exchange properties and indirect determination of the interstitial water composition of an argillaceous rock. Application to the Callovo-Oxfordian low-water-content formation
121
Modelling of the ionosphere/thermosphere behaviour during the April 2002 magnetic storms: A comparison of the UAM results with the ISR and NRLMSISE-00 data Original Research Article
122
Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France
123
Modelling of the kinetics of colour change in hazelnuts during air roasting Original Research Article
124
Modelling of the kinetics of thermal inactivation of glucoamylase from Aspergillus niger
125
Modelling of the Lenzing SO2 recovery process and validation with plant data
126
Modelling of the life cycle of Chironomus species using an energy-based model
127
Modelling of the life cycle of products with data acquisition features
128
Modelling of the loading rate in facultative wastewater stabilization ponds and the assessment of organic matter decline
129
Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects
130
Modelling of the long term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part I. Model description and evaluation
131
Modelling of the long-term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part II. Projected long-term fate of pesticide residues
132
Modelling of the Mannesmann effect
133
Modelling of the mass flow distribution around an array of rectangular blocks in-line arranged and simulating the cross-section of a winding disc-type transformer
134
Modelling of the mechanical behavior and damage processes of fibrous ceramic matrix composites: application to a 2-D SiC/SiC
135
Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure
136
Modelling of the mesophilic anaerobic co-digestion of olive mill wastewater with olive mill solid waste using anaerobic digestion model No. 1 (ADM1)
137
Modelling of the metallic phases of different Pt–Rh/Al2O3–CeO2 catalysts: influence of the rhodium loading and nature of the metallic precursors Original Research Article
138
Modelling of the micro-segregation of twin-roll thin strip casting
139
Modelling of the microstructure and strength evolution in Al–Mg–Si alloys during multistage thermal processing Original Research Article
140
Modelling of the microstructure and transport properties of concrete
141
Modelling of the microstructure: From classical cellular automata approach to the frontal one
142
Modelling of the migration of trace elements along groundwater flowpaths by using a steady state approach application to the site at El Berrocal (Spain)
143
Modelling of the mixed convection in the windings of a disc-type power transformer
144
Modelling of the moisture concentration field due to cyclical hygrothermal conditions in thick laminated pipes
145
Modelling of the monthly and daily behaviour of the runoff of the Xallas river using Box–Jenkins and neural networks methods
146
Modelling of the motion of a cart on a smooth rigid surface
147
Modelling of the motion of a disk rolling on a curve in
148
Modelling of the motion of a disk rolling on a smooth rigid surface Original Research Article
149
Modelling of the motion of a disk rolling on a torus
150
Modelling of the multiaxial elasto-plastic behaviour of porous metals with internal gas pressure
151
Modelling of the nitriding process
152
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
153
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
154
Modelling of the operation process of repairable technical objects with the use information from an artificial neural network
155
Modelling of the outer electron belt flux dropout and losses during magnetic storm main phase Original Research Article
156
Modelling of the panel zone in steel and composite moment frames
157
Modelling of the particle size distribution function in the nucleation and early stages of thin film growth
158
Modelling of the Pb17Li/water interaction within a blanket module
159
Modelling of the performance of asphalt pavement using response surface methodology
160
Modelling of the performance of asphalt pavement using response surface methodology—the kinetics of the aging
161
Modelling of the performance of industrial HDS reactors using a hybrid neural network approach
162
Modelling of the perimeter recombination effect in GaAs-based micro-solar cell
163
Modelling of the periodic anaerobic baffled reactor (PABR) based on the retaining factor concept
164
MODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
165
Modelling of the phase behaviour for vegetable oils at supercritical conditions
166
Modelling of the physical behaviour of clay barriers close to water saturation
167
Modelling of the planar motion of a rolling four links robot
168
Modelling of the plasma spray process with liquid feedstock injection
169
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
170
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
171
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
172
Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach
173
Modelling of the plastification near the rough surface of a rail by the wheel–rail contact
174
Modelling of the pore flow in capillary electrochromatography
175
Modelling of the pore structure variation with pH for pore-filled pH-sensitive poly(vinylidene fluoride)–poly(acrylic acid) membranes
176
Modelling of the porous anodizing of aluminium: Generation of experimental input data and optimization of the considered model
177
Modelling of the post-localization behaviour in tube hydroforming of low carbon steels
178
Modelling of the prediction of tensile and density properties in particle reinforced metal matrix composites by using neural networks
179
Modelling of the Process of Solid-Liquid Extraction of Total Polyphenols from Soybeans
180
Modelling of the pyrolysis of high density polyethylene: Product distribution in a fluidized bed reactor
181
Modelling of the pyrolysis of wet wood
182
Modelling of the quasisaturation behaviour in the high-voltage MOSFET with vertical trench gate
183
Modelling of the rate of oil spill disappearance from seawater for Kuwaiti crude and its products
184
Modelling of the reaction of N-oxidation of 2-methylpyridine using hydrogen peroxide and a complex metal catalyst
185
Modelling of the receiver transient flux distribution due to cloud passages on a solar tower thermal power plant
186
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
187
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
188
Modelling of the residence time distribution in micromixers
189
Modelling of the residual state of friction stir welded plates Review Article
190
Modelling of the resuspension of particle clusters from multilayer aerosol deposits with variable porosity
191
Modelling of the retention of uncharged molecules with nanofiltration
192
Modelling of the Reynolds stress redistribution with a wall effect vector
193
Modelling of the rheological behaviour of aluminium alloys in multistep hot deformation using the multiple regression analysis and artificial neural network techniques
194
Modelling of the river flowrate: the influence of the training set selection
195
Modelling of the rock structure stress field near the cavities and estimation of the cavity effect influence on the tidal measurements Original Research Article
196
Modelling of the rolling processes by a 3-D rigid plastic/visco-plastic finite element method with shifted ICCG method
197
Modelling of the scatter in short fatigue cracks growth kinetics in relation with the polycrystalline microstructure
198
Modelling of the signal processing electronics of JET interferometer-polarimeter
199
Modelling of the signal processing electronics of JET interferometer-polarimeter
200
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
201
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
202
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
203
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
204
MODELLING OF THE SPALLED ROLLING ELEMENT BEARING VIBRATION SIGNAL: AN OVERVIEW AND SOME NEW RESULTS
205
Modelling of the spent fuel oxidation: Toward the operational model
206
Modelling of the static synchronous series compensator (SSSC) in three-phase Newton power flow
207
Modelling of the stiffness of elastic body
208
Modelling of the strand and mold temperature in the continuous steel caster
209
Modelling of the stress-strain state of block rock mass of ore deposits during development by caving mining systems
210
Modelling of the structure and vibrational properties of LDA, HDA, and VHDA amorphous ices
211
Modelling of the substrate heterogeneities experienced by a limited microbial population in scale-down and in large-scale bioreactors
212
Modelling of the sulfuric acid leaching of mechanically activated titanite
213
Modelling of the surface tension of binary and ternary mixtures with the gradient theory of fluid interfaces
214
Modelling of the surface tension of pure components with the gradient theory of fluid interfaces: a simple and accurate expression for the influence parameters
215
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
216
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
217
Modelling of the temperature distribution during field assisted sintering
218
Modelling of the temperature distribution during field assisted sintering Original Research Article
219
Modelling of the ternary system H3PO4/H2O/TBP
220
Modelling of the thermal behaviour of an ultracapacitor for a 42-V automotive electrical system
221
Modelling of the thermal-mechanical behaviour of a single size beryllium pebble bed
222
Modelling of the thermic exchanges during a drilling. Resolution with Adomianʹs decomposition method
223
Modelling of the thermodynamic properties of ionic solutions using a stepwise solvation-equilibrium model
224
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
225
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
226
Modelling of the thermodynamic properties of the water–ammonia mixture by three different approaches
227
Modelling of the three phase LLV region for ternary hydrocarbon mixtures with the Soave-Redlich-Kwong equation of state
228
Modelling of the three-dimensional creep behavior of non-reinforced thermoplastics
229
Modelling of the transport of methane and higher hydrocarbons in fusion devices
230
Modelling of the tumor growth under oncolytic virotherapy with piecewise differential operators: The effects of combinations of specialist viruses
231
Modelling of the variant selection mechanism in the phase transformation of HSLA steel produced by compact strip production Original Research Article
232
Modelling of the Vickers hardness of paint coatings deposited on metallic substrates
233
Modelling of thermal and flow stratification for reactor pressure vessel pressurised thermal shock Original Research Article
234
Modelling of thermal conductivity of porous materials: application to thick thermal barrier coatings
235
Modelling of thermal desorption of hydrogen from metals
236
Modelling of thermal desorption of hydrogen from metals
237
Modelling of thermal energy storage in industrial energy systems the method development of MIND
238
Modelling of thermal phenomena in electric arc during surfacing
239
Modelling of thermal pressure forming of starch-based materials Original Research Article
240
Modelling of thermal removal of tars in a high temperature stage fed by a plasma torch
241
Modelling of thermal response of oil-heated tools due to different flow rates for the manufacture of composite structures
242
Modelling of thermal shock experiments of carbon based materials in JUDITH
243
Modelling of thermally detected optical absorption and luminescence of (In,Ga)N/GaN heterostructures
244
Modelling of thermally enhanced erosion of beryllium
245
Modelling of thermochemical plumes and implications for the origin of the Siberian traps
246
Modelling of thermomechanical fatigue stress relaxation in a single-crystal nickel-base superalloy
247
Modelling of Thin Elastic Plates with Small Piezoelectric Inclusions and Distributed Electronic Circuits. Models for Inclusions that Are Small with Respect to the Thickness of the Plate
248
MODELLING OF THIN LAYER DRYING KINETICS OF COCOA BEANS DURING ARTIFICIAL AND NATURAL DRYING
249
Modelling of thin layer drying kinetics of some fruits under open-air sun drying process Original Research Article
250
Modelling of thin layer drying of parsley leaves in a convective dryer and under open sun Original Research Article
251
Modelling of thin-film silicon solar cells
252
Modelling of thin-layer drying kinetics of red chillies Original Research Article
253
Modelling of Thrace Basin, NW Turkey using gravity and magnetic anomalies with control of seismic and borehole data
254
Modelling of Three-dimensional Air Temperature Distributions in Porous Media
255
Modelling of three-dimensional jet array impingement and heat transfer on a concave surface
256
Modelling of three-dimensional mechanical systems using point coordinates with a recursive approach
257
Modelling of three-dimensional temperature field inside the mould during continuous casting of steel
258
Modelling of three-layered piezoelectric plates
259
Modelling of thunderclouds and lightning generation on Titan
260
Modelling of tide and surge elevations in the Solent and surrounding waters: The importance of tide–surge interactions
261
Modelling of time related drying changes on matte coated paper with artificial neural networks
262
Modelling of time resolved and long contact time dissolution studies of spent nuclear fuel in 10 mM carbonate solution – A comparison between two different models and experimental data
263
Modelling of time-dependent behavior of the basal sliding surface of the إknes rockslide area in western Norway
264
Modelling of time-dependent biome shifts under global climate changes
265
Modelling of time-dependent biome shifts under global climate changes
266
Modelling of tonal noise control from subsonic axial fans using flow control obstructions
267
Modelling of tornado and microburst-induced wind loading and failure of a lattice transmission tower
268
Modelling of traffic flow and air pollution emission with application to Hong Kong Island
269
Modelling of transient liquid phase bonding in binary systems—A new parametric study
270
Modelling of transient moisture concentration of semolina pasta during air drying Original Research Article
271
Modelling of transient temperature fields during filling stage of powder injection moulding
272
Modelling of transport and biogeochemical processes in pollution plumes: literature review and model development
273
Modelling of transport and biogeochemical processes in pollution plumes: Vejen landfill, Denmark
274
Modelling of transport and dispersion of arbitrary-density particles in turbulent flows
275
Modelling of transport phenomena in laser surface alloying with distributed species mass source
276
Modelling of transport processes in soils at various scales in space and time: J. Feyen and K. Wiyo (Eds.), Wageningen Pers, Wageningen, The Netherlands, 1999. Softcover 794 pp. US$ 149. ISBN 90-74134-76-9
277
Modelling of transport properties and state of water of polyelectrolytes containing various amounts of water
278
Modelling of Transportation Policies to Encourage Shifting from Private Car to the Public Transport Usage in Putrajaya
279
MODELLING OF TRANSVERSE VIBRATION OF SHORT BEAMS FOR CRACK DETECTION AND MEASUREMENT OF CRACK EXTENSION
280
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
281
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
282
Modelling of Trickle Bed Reactor for the Catalytic Wet Air Oxidation of Phenol
283
Modelling of tritium retention and target lifetime of the ITER divertor using the ERO code
284
Modelling of trona based spray dry scrubbing of SO2
285
Modelling of tropical greenhouse temperature by auto regressive and neural network models
286
Modelling of Tsunami Waves
287
Modelling of tubes subjected to axial crushing
288
Modelling of Tudung Saji Weaving Using Elements in Group Theory
289
Modelling of turbulent gas-particle flows with focus on two-way coupling effects on turbophoresis
290
Modelling of turbulent mixing at the shelf edge
291
Modelling of turbulent molten pool convection in laser welding of a copper–nickel dissimilar couple
292
Modelling of turbulent scalar transport in homogeneous turbulence
293
Modelling of TWIP effect on work-hardening
294
Modelling of TWIP effect on work-hardening
295
MODELLING OF TWO PHASE FLOW PRESSURE DROP OF REFRIGERANT MIXTURES UNDER LIQUID/GAS INJECTION CONDITIONS
296
Modelling of two wave mixing experiments in sillenite crystals Original Research Article
297
Modelling of two-dimensional spatial effects on the spread of forest pests and their management
298
Modelling of two-dimensional spatial effects on the spread of forest pests and their management
299
Modelling of two-phase flow under accidental conditions fusion codes benchmark
300
Modelling of two-phase thermal conductivity
301
Modelling of two-stage anaerobic digestion using the IWA Anaerobic Digestion Model No. 1 (ADM1
302
Modelling of Type I fracture network: Objective function formulation by fuzzy sensitivity analysis
303
Modelling of U, Th, Ra and 137Cs radionuclides behaviour in rivers. Comparison with field observations
304
Modelling of UAV formation flight using 3D potential field
305
Modelling of ultrafiltration of non-sucrose compounds in sugar beet processing Original Research Article
306
Modelling of ultrasound therapeutic heating and numerical study of the dynamics of the induced heat shock response
307
Modelling of uncertain systems via linear programming
308
Modelling of uncertain systems with application to robust process control
309
Modelling of Uncertainties and Price Elastic Demands in Energy-environment Planning for India
310
Modelling of unclosed nonlinear terms in a pdf closure for turbulent flames
311
Modelling of unlubricated oscillating sliding wear of DLC-coatings considering surface topography, oxidation and graphitisation
312
Modelling of Updating Moving Object Database Using Timed Petri Net Model
313
Modelling of upwelling–downwelling cycles caused by variable wind in a very sensitive coastal system
314
Modelling of urban background pollution in Buenos Aires City (Argentina)
315
Modelling of urban sensible heat flux at multiple spatial scales: A demonstration using airborne hyperspectral imagery of Shanghai and a temperature–emissivity separation approach
316
Modelling of urea-EnFETs for haemodialysis applications
317
Modelling of vacuum membrane distillation
318
Modelling of value creation based on Emergent Synthesis
319
Modelling of vapour-compression liquid chillers with neural networks
320
Modelling of vehicular exhausts – a review
321
MODELLING OF VIBRATING SYSTEMS USING TIME-DOMAIN FINITE ELEMENT METHOD
322
Modelling of vibrational Davydov splittings in α-T6 single crystal
323
Modelling of vibro-impact penetration of self-exciting percussive-rotary drill bit
324
Modelling of vibro-impact system driven by beat frequency
325
Modelling of vibro-impact system driven by beat frequency
326
Modelling of vibro-impact system driven by beat frequency
327
Modelling of void formation in the subcooled boiling regime in the athlet code to simulate flow instability for research reactors Original Research Article
328
Modelling of volatile organic compounds emission from dry building materials
329
Modelling of volatile organic compounds emission from dry building materials
330
Modelling of volatile product evolution in coal pyrolysis. The role of aerial oxidation
331
Modelling of wall and SOL processes and contamination of ITER plasma after impurity injection with the tokamak code TOKES
332
Modelling of waste heat recovery for combined heat and power applications
333
Modelling of water adsorption by activated carbons: effects of microporous structure and oxygen content Original Research Article
334
Modelling of water and nitrogen balances in the ponded water and soil profile of rice fields in Northern Greece
335
Modelling of water and sediment transport over grassed areas
336
Modelling of water exchange through the Strait of the Dardanelles
337
Modelling of Water Flows and Cohesive Sediment Fluxes in the Humber Estuary, UK
338
Modelling of water mist fire suppression systems by a one-zone model
339
Modelling of water pollution in the Thermaikos Gulf with fuzzy parameters
340
Modelling of water pollution in the Thermaikos Gulf with fuzzy parameters
341
MODELLING OF WATER QUALITY-BASED EMISSION LIMITS FOR INDUSTRIAL DISCHARGES IN RIVERS
342
MODELLING OF WATER QUALITY-BASED EMISSION LIMITS FOR INDUSTRIAL DISCHARGES IN RIVERS
343
Modelling of water sorption isotherms of macaroni stored in a chamber under controlled humidity and thermodynamic approach Original Research Article
344
Modelling of water sump evaporation in a CFD code for nuclear containment studies
345
Modelling of water transport and swelling associated with starch gelatinization during rice cooking Original Research Article
346
Modelling of water transport in osmotic distillation using asymmetric membrane
347
Modelling of water vapour adsorption on foods products by a statistical physics treatment using the grand canonical ensemble
348
Modelling of water wave interaction with multiple cylinders of arbitrary shape
349
Modelling of water/organic vapor dehydration by glassy polymer membranes Original Research Article
350
Modelling of water–energy systems. The case of desalination
351
Modelling of wave climate and sediment transport patterns at a tideless embayed beach, Pirita Beach, Estonia
352
Modelling of wave propagation in composite plates using the time domain spectral element method
353
Modelling of wavelength cut-off filters and polarising mirrors in a neutron guide
354
Modelling of wavelength cut-off filters and polarising mirrors in a neutron guide
355
Modelling of weakly bonded laminated composite plates at large deflections
356
MODELLING OF WEATHER CHARACTERISTICS AND WIND POWER IN THE EASTERN PART OF SAUDI ARABIA
357
MODELLING OF WEATHER CHARACTERISTICS AND WIND POWER IN THE EASTERN PART OF SAUDI ARABIA
358
Modelling of weather variability effect on fitophenology
359
Modelling of weather variability effect on fitophenology
360
Modelling of westinghouse and sulphur-iodine water splitting cycles for hydrogen production
361
Modelling of wildlife fatality hotspots along the Snowy Mountain Highway in New South Wales, Australia Original Research Article
362
Modelling of wind/Diesel/battery hybrid power systems for far North Cameroon
363
Modelling of wind-driven rain and its soil detachment effect on hill slopes
364
Modelling of work hardening
365
Modelling of work hardening
366
Modelling of work hardening and stress saturation in FCC metals
367
Modelling of work roll edge contact in thin strip rolling
368
Modelling of wrinkling in deep drawing of different grades of annealed commercially pure aluminium sheets when drawn through a conical die using artificial neural network
369
Modelling of xyloglucan, pectins and pectic side chains binding onto cellulose microfibrils
370
Modelling of xyloglucan, pectins and pectic side chains binding onto cellulose microfibrils
371
Modelling of yeast inactivation in sonicated tomato juice
372
Modelling of yield length in the mould of commercial plastics using artificial neural networks
373
Modelling of zinc (II) transport through a PC-88A supported liquid membrane Original Research Article
374
Modelling of zinc extraction from sulphate solutions with bis(2-ethylhexyl)thiophosphoric acid by emulsion liquid membranes
375
Modelling of zinc transport through a supported liquid membrane
376
Modelling of z-potential of the montmorillonite/electrolyte solution interface
377
Modelling of ZrO2 deposition from ZrCl4 and H2O on the Si(1 0 0) surface: initial reactions and surface structures
378
Modelling of Zry-4 cladding oxidation by air, under severe accident conditions using the MAAP4 code
379
Modelling of β-d-glucopyranose ring distortion in different force fields: a metadynamics study Original Research Article
380
Modelling off-axis ply matrix cracking in continuous fibre-reinforced polymer matrix composite laminates
381
Modelling official and parallel exchange rates in Colombia under alternative regimes: a non-linear approach
382
Modelling offshore sand wave evolution
383
Modelling oil price volatility with structural breaks
384
Modelling oil price volatility
385
Modelling oil-shale integrated tri-generator behaviour: predicted performance and financial assessment
386
Modelling oligomer formation in chromatographic separations
387
Modelling olive flowering date using chilling for dormancy release and thermal time
388
Modelling olive phenological response to weather and topography
389
Modelling on the effect of diffusive and convective substrate transport for biofilm
390
Modelling on-farm costs of soil conservation policies with MODAM
391
Modelling operational adaptations of tactical production plans on pot plant nurseries: a simulation approach
392
Modelling operational, economic and environmental performance of an air transport network
393
Modelling operator rediagnosis during an SGTR event
394
Modelling opinion formation driven communities in social networks Original Research Article
395
Modelling Optimal Control of In-Host HIV Dynamics Using Different Control Strategies
396
Modelling optimal crop sequences using network flows
397
Modelling optimal exploitation of petroleum resources in India
398
Modelling Optimal Predicting Future Cash Flows Using New Data Mining Methods (A Combination of Artificial Intelligence Algorithms)
399
Modelling optimal retirement decisions in Australia : 074058 (E10, B81) Atkinson M.E., Creedy J., The University of Melbourne, Centre for Actuarial Studies, Research Paper, nr. 21, 1995, pp. 30
400
Modelling optimal risk allocation in PPP projects using artificial neural networks
401
Modelling optimal strategies for decreasing nitrate loss with variation in weather – a farm-level approach
402
Modelling optimal strategies for the allocation of wealth in multicurrency investments
403
Modelling Optimum Sites for Locating Reservoirs in Tropical Environments
404
Modelling oral malodour in a longitudinal study
405
Modelling ordinal recurrent events
406
Modelling organic alkalinity in the Baltic Sea using a Humic-Pitzer approach
407
Modelling organic matter dynamics in headwater streams of south-western British Columbia, Canada
408
Modelling organic matter dynamics in headwater streams of south-western British Columbia, Canada
409
Modelling organic molecular crystals by hybrid quantum mechanical/molecular mechanical embedding
410
Modelling orthogonal machining of carbon steels. Part I: Strain hardening and yield delay effects
411
Modelling orthogonal machining of carbon steels. Part I: Strain hardening and yield delay effects
412
Modelling orthogonal machining of carbon steels. Part II: Comparisons with experiments
413
Modelling orthogonal machining of carbon steels. Part II: Comparisons with experiments
414
Modelling orthogonal strip HPGe detector systems
415
Modelling orthogonal strip HPGe detector systems
416
Modelling orthophosphate evolution in a high rate algal pond
417
Modelling orthophosphate evolution in a high rate algal pond
418
Modelling oscillations and waves of cytosolic calcium Original Research Article
419
Modelling osmotic stress by Flux Balance Analysis at the genomic scale
420
Modelling our selves: Being No One: The Self-Model Theory of Subjectivity by Thomas Metzinger, MIT Press, 2003. $55.00/£34.95 (hbk) (634 pages) ISBN 0 262 13417 9
421
Modelling outburst floods from moraine-dammed glacial lakes
422
Modelling outflow following rupture in pipeline networks
423
Modelling output and retention of suspended solids in an integrated salmon–mussel culture
424
Modelling output and retention of suspended solids in an integrated salmon–mussel culture
425
Modelling output waveform and propagation delay of a CMOS inverter in the submicron range
426
Modelling over- and underdispersed frequencies of successful ink transmissions onto paper
427
Modelling Overdispersion for Complex Survey Data
428
Modelling oxygen deficits in the Seine River downstream of combined sewer overflows
429
Modelling oxygen deficits in the Seine River downstream of combined sewer overflows
430
Modelling Oxygen Dynamics in an Intermittently Stratified Estuary: Estimation of Process Rates Using Field Data
431
Modelling Oxygen Transport in a Reedbed-constructed Wetland Purification System for Dilute Effluents
432
Modelling Oyster Population Response to Variation in Freshwater Input
433
Modelling ozone deposition fluxes: The relative roles of deposition and detoxification processes
434
Modelling ozone fluxes over Hungary
435
Modelling ozone stomatal flux of wheat under mediterranean conditions
436
Modelling PAHs adsorption and sequestration in freshwater and marine sediments
437
Modelling pairwise comparisons on ratio scales
438
Modelling palaeostress magnitude and age in extensional basins: a case study from the Mesozoic Bristol Channel Basin, U.K.
439
Modelling paper as a two-dimensional elastic–plastic stochastic network
440
Modelling partially-emptied compaction bands induced by borehole drilling
441
Modelling particle dispersion within a ventilated airspace
442
Modelling particle disruption of an organic fine chemical compound using Lasentec focussed beam reflectance monitoring (FBRM) in agitated suspensions
443
Modelling particle emissions from traffic flows at a freeway in Brisbane, Australia
444
Modelling particle random walk in a confined environment for inclusion in fluidised bed applications
445
Modelling particle size distribution dynamics in marine waters
446
Modelling particle transformations and the downward organic carbon flux in the NE Atlantic Ocean
447
Modelling particulate erosion–corrosion in aqueous slurries: some views on the construction of erosion–corrosion maps for a range of pure metals
448
Modelling particulate erosion–corrosion regime transitions for Al/Al2O3 and Cu/Al2O3 MMCs in aqueous conditions
449
Modelling partitioning and distribution of micropollutants in the lagoon of Venice: a first step towards a comprehensive ecotoxicological model
450
Modelling partitioning and distribution of micropollutants in the lagoon of Venice: a first step towards a comprehensive ecotoxicological model
451
Modelling passive modified atmosphere packaging of strawberries: Numerical analysis and model validation
452
Modelling pasture mass through time in a managed grazing system subject to perturbations resulting from complexity in natural biological processes
453
Modelling pattern formation in CO + O2 on Pt{1 0 0}
454
Modelling Pb, Zn and As transfer from terrestrial to aquatic ecosystems during the ice-free season in three Pyrenean catchments Original Research Article
455
Modelling PCB bioaccumulation in a Baltic food web
456
Modelling peak-hour urban freight movements with limited data availability
457
Modelling pedogenesis: Purpose and overview of the Special Issue
458
Modelling perceived quality, visitor satisfaction and behavioural intentions at the destination level
459
Modelling perceptions of building quality—A neural network approach
460
Modelling percolation in fibre and sphere mixtures: Routes to more efficient network formation
461
Modelling periphyton dynamics in running water
462
Modelling periphyton dynamics in running water
463
Modelling periphyton in irrigation canals
464
Modelling periphyton in irrigation canals
465
Modelling permanent deformation behaviour of unbound granular materials
466
Modelling Perspectives on Aging: Can Mathematics Help us Stay Young?
467
Modelling pesticide flow and deposition from air-assisted orchard spraying in orchards: A new integrated CFD approach
468
Modelling pesticide leaching in a sandy soil with the VARLEACH model
469
Modelling pesticide transport in a shallow groundwater catchment using tritium and helium-3 data
470
Modelling pesticide volatilization after soil application using the mechanistic model VoltʹAir
471
Modelling petroleum formation from heterogeneous source rocks: the influence of frequency factors on activation energy distribution and geological prediction
472
Modelling petroleum generation of Late Cretaceous Dabut Formation in the Jiza-Qamar Basin, Eastern Yemen
473
Modelling Petroleum Prices in Tanzania: A Comparative Analysis between ARIMA and Holt’s Method
474
Modelling pH evolution and lactic acid production in the growth medium of a lactic acid bacterium: Application to set a biological TTI
475
Modelling Phase Change with Dissipative Particle Dynamics Using a Consistent Boundary Condition
476
Modelling phase separation in Fe–Cr system using different atomistic kinetic Monte Carlo techniques
477
Modelling phase shifts, peak shifts and peak width variations in spectral data sets: its value in multivariate data analysis
478
Modelling phase shifts, peak shifts and peak width variations in spectral data sets: its value in multivariate data analysis Original Research Article
479
Modelling phase–assemblage diagrams for magnesian metapelites in the system K2O–FeO–MgO–Al2O3–SiO2–H2O: geodynamic consequences for the Monte Rosa nappe, Western Alps
480
Modelling phenolic and technological maturities of grapes by means of the multivariate relation between organoleptic and physicochemical properties Original Research Article
481
Modelling pheromone anemotaxis for biosecurity surveillance: Moth movement patterns reveal a downwind component of anemotaxis
482
Modelling pheromone anemotaxis for biosecurity surveillance: Moth movement patterns reveal a downwind component of anemotaxis
483
Modelling phosphate adsorption to the soil: Application of the non-ideal competitive adsorption model
484
Modelling phosphate transport and assimilation in microalgae; how much complexity is warranted?
485
Modelling phosphate transport and assimilation in microalgae; how much complexity is warranted?
486
Modelling phosphorus and suspended particulate matter in Ringkøbing Fjord in order to understand regime shifts
487
Modelling phosphorus dynamics in multi-branch river systems: A study of the Black River, Lake Simcoe, Ontario, Canada Original Research Article
488
Modelling phosphorus transport in a surface irrigation drain
489
Modelling photochemical oxidant formation, transport, deposition and exposure of terrestrial ecosystems
490
Modelling photochemical reactions in atmospheric water droplets: An assessment of the importance of surface processes
491
Modelling photochemical smog in the Perth region
492
Modelling photodegradation in the global carbon cycle
493
Modelling photodegradation in the global carbon cycle
494
Modelling photonic crystal fibres
495
Modelling photoreactions in proteins by density functional theory
496
Modelling photovoltaic water pumping systems and evaluation of their CO2 emissions mitigation potential
497
Modelling phylogenetic diversity
498
Modelling physical activity participation in the 50+ age group
499
Modelling physical processes of haline stratification in ROFIs with application to the Rhine outflow region
500
Modelling physical properties of highly crystallized polyester reinforced with multiwalled carbon nanotubes
501
Modelling physical properties of mixtures of clays: example of a two-component mixture of kaolinite and montmorillonite
502
Modelling physics detectors in a computer aided design system for simulation purposes
503
Modelling phytate degradation kinetics in soaked wheat and barley
504
Modelling phytoclimatic versatility as a large scale indicator of adaptive capacity to climate change in forest ecosystems
505
Modelling phytoclimatic versatility as a large scale indicator of adaptive capacity to climate change in forest ecosystems
506
Modelling phytoplankton allelopathy in a nutrient-plankton model with spatial heterogeneity
507
Modelling phytoplankton allelopathy in a nutrient-plankton model with spatial heterogeneity
508
Modelling phytoplankton deposition to Chesapeake Bay sediments during winter–spring: interannual variability in relation to river flow
509
Modelling phytoplankton dynamics in the River Swale, an upland river in NE England
510
MODELLING PHYTOPLANKTON IN THE VAAL RIVER (SOUTH AFRICA)
511
MODELLING PHYTOPLANKTON IN THE VAAL RIVER (SOUTH AFRICA)
512
Modelling phytoplankton succession on the Bering Sea shelf: role of climate influences and trophic interactions in generating Emiliania huxleyi blooms 1997–2000
513
Modelling piezoelectric energy harvesting potential in an educational building
514
Modelling piezoelectric modules with interdigitated electrode structures
515
Modelling pin-point plant cover data along an environmental gradient
516
Modelling pin-point plant cover data along an environmental gradient
517
Modelling planetary boundary layer ozone, using meteorological parameters at Uccle and Payerne
518
Modelling planktonic ecosystems: parameterizing complexity
519
Modelling planning control decisions: a logistic regression analysis on office development applications in urban Kowloon, Hong Kong
520
Modelling plant and soil water dynamics in semi-arid ecosystems with limited site data
521
Modelling plant and soil water dynamics in semi-arid ecosystems with limited site data
522
Modelling plant canopy effects on variability of soil temperature and water: model calibration and validation
523
Modelling plant carbon and nitrogen dynamics of a boreal aspen forest in CLASS — the Canadian Land Surface Scheme
524
Modelling plant carbon and nitrogen dynamics of a boreal aspen forest in CLASS — the Canadian Land Surface Scheme
525
Modelling Plant Disease Epidemics
526
Modelling plant growth dynamics in sagebrush steppe communities affected by fire
527
Modelling plant population size and extinction thresholds from habitat loss and habitat fragmentation: Effects of neighbouring competition and dispersal strategy
528
Modelling plant population size and extinction thresholds from habitat loss and habitat fragmentation: Effects of neighbouring competition and dispersal strategy
529
Modelling plant resource allocation and growth partitioning in response to environmental heterogeneity
530
Modelling plant resource allocation and growth partitioning in response to environmental heterogeneity
531
Modelling plant species richness using functional groups
532
Modelling plant species richness using functional groups
533
Modelling Plant Variation Through Growth
534
Modelling plastic deformation in BCC metals: Dynamic recovery and cell formation effects
535
Modelling Pliocene warmth: contribution of atmosphere, oceans and cryosphere
536
Modelling plume rise and dispersion from pool fires
537
Modelling plume-related uplift, gravity and melting on Venus
538
Modelling PM10 aerosol data from the Qalabotjha low-smoke fuels macro-scale experiment in South Africa
539
Modelling PM10 aerosol data from the Qalabotjha low-smoke fuels macro-scale experiment in South Africa
540
Modelling PM10 concentrations and carrying capacity associated with woodheater emissions in Launceston, Tasmania
541
Modelling point and diffuse source pollution of nitrate in a rural lowland catchment using the SWAT model
542
Modelling police success in catching burglars in the act
543
Modelling policies and decisions: A case study in mineral extraction
544
Modelling policies and decisions: A case study in mineral extraction
545
Modelling Political Trust in a Developing Country
546
Modelling pollutants dispersion and plume rise from large hydrocarbon tank fires in neutrally stratified atmosphere
547
Modelling pollution dispersion, the ecosystem and water quality in coastal waters: a review
548
Modelling polylactide/water/dioxane systems for TIPS scaffold fabrication
549
Modelling polymer interactions of the ‘molecular Velcro’ type in wood under mechanical stress
550
Modelling polymer-derived ceramics
551
Modelling population and community dynamics with qualitative reasoning
552
Modelling population and community dynamics with qualitative reasoning
553
Modelling population dynamics of aquatic insects with artificial neural networks
554
Modelling population dynamics of aquatic insects with artificial neural networks
555
Modelling population dynamics of banana plant-parasitic nematodes: A contribution to the design of sustainable cropping systems
556
Modelling population dynamics of banana plant-parasitic nematodes: A contribution to the design of sustainable cropping systems
557
Modelling population dynamics of the Common hamster (Cricetus cricetus): Timing of harvest as a critical aspect in the conservation of a highly endangered rodent
558
Modelling population growth vialaguerre-type exponentials
559
Modelling population processes with random initial conditions
560
Modelling population-level consequences of chronic external gamma irradiation in aquatic invertebrates under laboratory conditions Original Research Article
561
Modelling populations of Erigone atra and E. dentipalpis (Araneae: Linyphiidae) across an agricultural gradient in Scotland
562
Modelling populations of long-lived birds of prey for conservation: A study of imperial eagles (Aquila heliaca) in Kazakhstan Original Research Article
563
Modelling porous structures by repeated Sierpinski carpets
564
Modelling post-deformation softening kinetics of 304 austenitic stainless steel using cellular automata
565
Modelling post-fire soil erosion hazard using ordinal logistic regression: A case study in South-eastern Spain
566
Modelling potassium uptake by wheat
567
Modelling potential crop growth processes : J. Goudriaan and H. H. van Laar. Kluwer Academic Publishers, Dordrecht, The Netherlands, 1994. pp. 238. Price: £75.50, $115, Dfl 180. ISBN 0 79233 2199
568
Modelling potential dispersal corridors for cougars in midwestern North America using least-cost path methods
569
Modelling potential dispersal corridors for cougars in midwestern North America using least-cost path methods
570
Modelling potential distribution of fluvial fish species for expanding conservation knowledge: Case study of the genus Barbus in Iran
571
Modelling potential effects of petroleum exploration drilling on northeastern Georges Bank scallop stocks
572
Modelling potential effects of petroleum exploration drilling on northeastern Georges Bank scallop stocks
573
Modelling potential evapotranspiration of potential vegetation
574
Modelling potential evapotranspiration of potential vegetation
575
Modelling Potential Field Sources in the Gelibolu Peninsula (Western Turkey) Using a Markov Random Field Approach
576
Modelling potential habitat for cougars in midwestern North America
577
Modelling potential habitat for cougars in midwestern North America
578
Modelling powder compaction and pressure cycling
579
Modelling powder mixing in mass flow discharge: A kinematic approach
580
Modelling power output in photovoltaic modules for outdoor operating conditions
581
Modelling precipitate distribution in reduced-activation steels
582
Modelling precipitate nucleation and growth with multiple precipitate species under isothermal conditions: Formulation and analysis
583
Modelling precipitation in binary alloys by cluster dynamics Original Research Article
584
Modelling precipitation in Sweden using multiple step markov chains and a composite model
585
Modelling precipitation in zirconium niobium alloys
586
Modelling precipitation-streamflow processes in karst basin: The case of the Jordan River sources, Israel
587
Modelling pre-clearing vegetation distribution using GIS-integrated statistical, ecological and data models: A case study from the wet tropics of Northeastern Australia
588
Modelling pre-clearing vegetation distribution using GIS-integrated statistical, ecological and data models: A case study from the wet tropics of Northeastern Australia
589
Modelling predation by transient leopard seals for an ecosystem-based management of Southern Ocean fisheries
590
Modelling predation by transient leopard seals for an ecosystem-based management of Southern Ocean fisheries
591
Modelling predation in functional response
592
Modelling predation in functional response
593
Modelling prediction of the microcapsule size of polyelectrolyte complexes produced by atomization
594
Modelling predictors of adolescents’ attitude towards a cyber lives index
595
Modelling Predictors of Students’ Learning Gain - An Empirical Evidence using Structural Equation Modelling
596
Modelling preferences in multi-objective engineering design
597
Modelling preferences in multi-objective engineering design
598
Modelling prehispanic Pueblo societies in their ecosystems
599
Modelling prehispanic Pueblo societies in their ecosystems
600
Modelling pressure distribution and anode/cathode streams vapour–liquid equilibrium composition in liquid feed direct methanol fuel cells
601
Modelling pressure drop evolution on high temperature filters
602
Modelling pressure drop in hepa filters during dynamic filtration
603
Modelling Pressurized Water Reactor cores in terms of porous media
604
Modelling PRI for water stress detection using radiative transfer models
605
Modelling price competition across many markets (An application to the Spanish loans market)
606
Modelling price dynamics: A hybrid truncated Lévy Flight–GARCH approach
607
modelling price formation and dynamics in the ethiopian maize market
608
modelling price formation and dynamics in the ethiopian maize market
609
Modelling primary production in a coastal embayment affected by upwelling using dynamic ecosystem models and artificial neural networks
610
Modelling primary production in a coastal embayment affected by upwelling using dynamic ecosystem models and artificial neural networks
611
Modelling procedures for directed network of data blocks
612
Modelling processes influencing shelf edge exchange of water and suspended sediment
613
Modelling processes influencing wind-induced internal wave generation and propagation
614
Modelling produced water dispersion and its direct toxic effects on the production and biomass of the marine copepod Calanus finmarchicus
615
Modelling production and biomasses of herbivorous and predatory zooplankton in lakes
616
Modelling production and biomasses of herbivorous and predatory zooplankton in lakes
617
Modelling production cost scenarios for biofuels and fossil fuels in Europe
618
Modelling profitability using survival combination scores
619
Modelling prognostic power of cardiac tests using rough sets
620
Modelling programme costs in economic evaluation
621
Modelling property management decisions using ‘iconCUR’
622
Modelling provenance of DBpedia resources using Wikipedia contributions
623
Modelling Pseudocalanus elongatus stage-structured population dynamics embedded in a water column ecosystem model for the northern North Sea
624
Modelling psychiatric and cultural possession phenomena with suggestion and fMRI
625
Modelling public transport trips by radial basis function neural networks
626
Modelling purine derivative excretion in dairy goats: endogenous excretion and the relationship between duodenal input and urinary output
627
Modelling quality variations in commercial Ontario pork production
628
Modelling quasi-stationary behaviour in metapopulations Original Research Article
629
Modelling radially symmetric impact craters with Zernike polynomials
630
Modelling radiation damage effects on a bcc iron lattice containing phosphorous impurity atoms near symmetrical tilt boundaries
631
Modelling radiation interception and radiation use efficiency for sugar beet under variable climatic stress
632
Modelling radiative balance in a row-crop canopy: Cross-row distribution of net radiation at the soil surface and energy available to clusters in a vineyard
633
Modelling radiative balance in a row-crop canopy: Cross-row distribution of net radiation at the soil surface and energy available to clusters in a vineyard
634
Modelling radiative balance in a row-crop canopy: Row–soil surface net radiation partition
635
Modelling radiative balance in a row-crop canopy: Row–soil surface net radiation partition
636
Modelling radiative heat transfer inside a basin type solar still
637
Modelling radioactivity in the environment: E.M. Scott (ed)., Radioactivity in the Environment, Volume 4, Elsevier Science Ltd. Oxford UK
638
Modelling radioactivity in the environment: E.M. Scott (Ed.); Elsevier B.V., Amsterdam, 2003, 450pp., price 150, US$150, ISBN 0080436633
639
Modelling radiocaesium transfer and long-term changes in reindeer
640
Modelling radioiodine transport across a capillary fringe
641
Modelling radionuclide distribution and transport in the environment Original
642
Modelling radionuclide transport for time varying flow in a channel network
643
Modelling radon progeny concentration variations in thermal spas
644
Modelling rail steel microstructure and its effect on crack initiation
645
Modelling rail wear transition and mechanism due to frictional heating
646
Modelling rain forest diversity: The role of competition
647
Modelling rain forest diversity: The role of competition
648
Modelling rainfall interception by vegetation of variable density using an adapted analytical model. Part 1. Model description
649
Modelling rainfall interception by vegetation of variable density using an adapted analytical model. Part 2. Model validation for a tropical upland mixed cropping system
650
Modelling rainfall interception in a mediterranean Quercus ilex ecosystem: Lesson from a throughfall exclusion experiment
651
Modelling rainfall-discharge at a mean inter-yearly scale in northern Algeria
652
Modelling rainfall-runoff using genetic programming
653
Modelling reacting localized air pollution using Computational Fluid Dynamics (CFD)
654
Modelling real world industrial systems: an inter-disciplinary approach based on petri nets Original Research Article
655
Modelling reality in mathematics classrooms: The case of word problems
656
Modelling real-time simultaneous saccharification and fermentation of lignocellulosic biomass and organic acid accumulation using dielectric spectroscopy
657
Modelling recombination current in polysilicon solar cell grain boundaries
658
Modelling recovery from soil acidification in European forests under climate change Original Research Article
659
Modelling recruitment of Populus tremuloides, Pinus banksiana, and Picea mariana following fire in the mixedwood boreal forest
660
Modelling recrystallization kinetics during hot rolling of AA5083
661
Modelling rectangular overfalls using Boussinesq equations
662
Modelling rectangular overfalls using Boussinesq equations
663
Modelling redundancy allocation for a fuzzy random parallel–series system
664
Modelling redundant structure in ecosystem by type-2 fuzzy logic system
665
Modelling redundant structure in ecosystem by type-2 fuzzy logic system
666
Modelling reef zonation in the Greater St Lucia Wetland Park, South Africa
667
Modelling Referencing Competency and Individual Performance
668
Modelling reflective practice for pre-service teachers: The role of teacher educators
669
Modelling refractory soil organic matter
670
Modelling refrigerant distribution in microchannel evaporators
671
Modelling regime shift behaviour in Asian real interest rates
672
Modelling regional markets for co-produced timber and biofuel
673
Modelling regressive and progressive effects of assimilation in speech perception
674
Modelling regulating ecosystem services trade-offs across landscape scenarios in Třeboňsko Wetlands Biosphere Reserve, Czech Republic
675
Modelling regulating ecosystem services trade-offs across landscape scenarios in Třeboňsko Wetlands Biosphere Reserve, Czech Republic
676
Modelling relationship between angiotensin-(I)-converting enzyme inhibition and the bitter taste of peptides
677
Modelling relationships between cognitive variables during and following public speaking in participants with social phobia
678
Modelling relative motion to facilitate intra-limb coordination
679
Modelling relative recency discrimination tasks using a stochastic working memory model
680
Modelling relaxation following T1 transformations of foams incorporating surfactant mass transfer by the Marangoni effect
681
Modelling representative and coherent Danish farm types based on farm accountancy data for use in environmental assessments
682
Modelling residence time distribution in chemical reactors: A novel generalised n-laminar model: Application to supercritical CO2 and subcritical water tubular reactors
683
Modelling residential property markets
684
Modelling residuals dependence in dynamic life tables: A geostatistical approach
685
Modelling resonances of the standing body exposed to vertical whole-body vibration: Effects of posture
686
Modelling resource availability in general hospitals design and implementation of a decision support model
687
Modelling respiration of packaged fresh-cut ‘Rocha’ pear as affected by oxygen concentration and temperature Original Research Article
688
Modelling respiration rate and nitrate removal in a nitrifying-denitrifying SBR treating domestic wastewater
689
Modelling respiration rate of fresh fruits and vegetables for modified atmosphere packages: a review Review Article
690
Modelling respiration rate of shredded Galega kale for development of modified atmosphere packaging Original Research Article
691
Modelling response of insect trap captures to pheromone dose
692
Modelling response of insect trap captures to pheromone dose
693
Modelling response of single-species populations to microcontaminants as a function of species size with examples for waterfleas (Daphnia magna) and cormorants (Phalacrocorax carbo)
694
Modelling response of single-species populations to microcontaminants as a function of species size with examples for waterfleas (Daphnia magna) and cormorants (Phalacrocorax carbo)
695
Modelling responses to nutritional, endocrine and genetic strategies to increase fertility in the UK dairy herd
696
Modelling results for the thermal management sub-system of a combined heat and power (CHP) fuel cell system (FCS)
697
Modelling results of avalanche multiplication in AlGaAs soft X-ray APDs
698
Modelling results of avalanche multiplication in AlGaAs soft X-ray APDs
699
Modelling retention and dispersion mechanisms of bluefin tuna eggs and larvae in the northwest Mediterranean Sea
700
Modelling retention in liquid chromatography as a function of solvent composition and pH of the mobile phase
701
Modelling retention in liquid chromatography of polyphenolic acids: Prediction of solvent composition and pH of the mobile phase Original Research Article
702
Modelling retention of heavy metals in the Oostriku peat bog, Estonia: Comparison of predicted and observed results
703
Modelling reversible cyclic voltammetry at the one-dimensional junction established by three phases: an organic liquid containing a neutral electroactive solute, an aqueous electrolyte solution, and an electronic conductor
704
Modelling rhetorical legal "logic" a double syllogism
705
Modelling rhetorical legal "logic" a double syllogism
706
Modelling rice and cotton acreage response in the Murray Darling Basin in Australia
707
Modelling ripple development under non-uniform flow and sediment supply-limited conditions in a laboratory flume
708
Modelling risk factors for injuries from dog bites in Greece: a case-only design and analysis
709
Modelling Risk to US Military Populations from Stopping Blanket Mandatory Polio Vaccination
710
Modelling risk, trade, agricultural and environmental policies to assess trade-offs between water quality and welfare in the hog industry
711
Modelling risk, trade, agricultural and environmental policies to assess trade-offs between water quality and welfare in the hog industry
712
Modelling river and floodplain interactions for ecological response
713
Modelling Robust Optimization in DEA With Ratio Data: A Case Study of Commercial Banks
714
Modelling Rooting Depth and Soil Strength in a Drying Soil Profile
715
Modelling rotary sweeping brushes and analyzing brush characteristic using finite element method
716
Modelling rotating stratified flows at laboratory-scale using spectrally-based DNS
717
Modelling route for abradable coatings
718
Modelling rumors: the no plane Pentagon French hoax case
719
MODELLING RUNOFF AND DIFFUSE POLLUTION LOADS IN URBAN AREAS
720
MODELLING RUNOFF AND DIFFUSE POLLUTION LOADS IN URBAN AREAS
721
Modelling runoff and erosion for a semi-arid catchment using a multi-scale approach based on hydrological connectivity
722
Modelling runoff and soil erosion in logged forests: Scope and application of some existing models
723
Modelling runoff with statistically downscaled daily site, gridded and catchment rainfall series
724
Modelling Rupture Dynamics of a Planar Fault in 3-D Half Space by Boundary Integral Equation Method: An Overview
725
Modelling Rural Residential Settlement Patterns with Cellular Automata
726
Modelling S&P 100 volatility: The information content of stock returns
727
Modelling safety-related driving behaviour—impact of parameter values
728
Modelling SAG milling power and specific energy consumption including the feed percentage of intermediate size particles
729
Modelling Saharan dust transport into the Mediterranean basin with CMAQ
730
Modelling salmon lice dispersal in Loch Torridon, Scotland
731
Modelling Salt Intrusion and Nitrate Concentrations in the Ythan Estuary
732
Modelling Sand Resuspension by Waves over a Rippled Bed
733
Modelling sand wave migration in shallow shelf seas
734
Modelling scenarios to assess the effects of different agricultural management and land use options to reduce diffuse nitrogen pollution into the river Elbe
735
Modelling sea level rise (SLR) impacts on salt marsh detrital outwelling C and N exports from an estuarine coastal lagoon to the ocean (Ria de Aveiro, Portugal)
736
Modelling sea level rise (SLR) impacts on salt marsh detrital outwelling C and N exports from an estuarine coastal lagoon to the ocean (Ria de Aveiro, Portugal)
737
Modelling seasonal and multi-annual variation in bank vole populations and nephropathia epidemica
738
Modelling seasonal dynamics of biomasses and nitrogen contents in a seagrass meadow (Zostera noltii Hornem.): application to the Thau lagoon (French Mediterranean coast)
739
Modelling seasonal dynamics of biomasses and nitrogen contents in a seagrass meadow (Zostera noltii Hornem.): application to the Thau lagoon (French Mediterranean coast)
740
Modelling seasonal flow variability of European rivers
741
Modelling seasonal flow variability of European rivers
742
Modelling seasonal nitrogen, carbon, water and heat dynamics of the Solling spruce stand
743
Modelling seasonal nitrogen, carbon, water and heat dynamics of the Solling spruce stand
744
Modelling seasonal patterns and long-run trends in U.S. time series
745
Modelling Seasonal Predator-Prey Interactions
746
Modelling seasonally varying data: A case study for Sudden Infant Death Syndrome (SIDS)
747
Modelling seawater intrusion in the Burdekin Delta Irrigation Area, North Queensland, Australia
748
Modelling secondary particle formation in emulsion polymerisation: application to making core–shell morphologies
749
Modelling security market events in continuous time: Intensity based, multivariate point process models
750
Modelling sediment delivery ratio over the Murray Darling Basin
751
Modelling sediment fluxes in estuarine waters using a curvilinear coordinate grid system
752
Modelling sediment load in a glacial meltwater stream in western Norway
753
Modelling sediment transport beneath regular symmetrical and asymmetrical waves above a plane bed
754
Modelling sediment transport from bare rilled hillslopes by areally averaged transport equations
755
Modelling sedimentation processes in a constructed stormwater wetland
756
Modelling seed dispersal to predict seedling recruitment: Recolonization dynamics in a plantation forest
757
Modelling seed dispersal to predict seedling recruitment: Recolonization dynamics in a plantation forest
758
Modelling seedbank dynamics of volunteer oilseed rape (Brassica napus)
759
Modelling seedling emergence in chickpea as influenced by temperature and sowing depth
760
Modelling seismic anisotropy variations across the Hikurangi subduction margin, New Zealand
761
Modelling Seismic Waves Around Underground Openings in Fractured Rock
762
Modelling selective H2S absorption and desorption in an aqueous MDEA-solution using a rate-based non-equilibrium approach
763
Modelling self- and shear-noise mechanisms in inhomogeneous, anisotropic turbulence
764
Modelling self-assembling of colloid particles in multilayered structures
765
Modelling self-design of the aquatic community in a newly created freshwater wetland
766
Modelling self-design of the aquatic community in a newly created freshwater wetland
767
Modelling self-ordering behaviour on Ag covered Pt vicinal surfaces
768
Modelling self-ordering behaviour on Ag covered Pt vicinal surfaces
769
Modelling semi-aquatic vertebrates’ distribution at the drainage basin scale: The case of the otter Lutra lutra in Italy
770
Modelling semi-aquatic vertebrates’ distribution at the drainage basin scale: The case of the otter Lutra lutra in Italy
771
Modelling semi-natural habitat area on lowland farms in western Ireland
772
Modelling series of studies with a common structure
773
Modelling settlement in open populations of reef fishes
774
Modelling settlement in open populations of reef fishes
775
Modelling setup times, process batches and transfer batches using activity network logic
776
Modelling sexual segregation in ungulates: effects of group size, activity budgets and synchrony
777
Modelling sexually transmitted infections: The effect of partnership activity and number of partners on R0
778
Modelling SF-6D health state preference data using a nonparametric Bayesian method
779
Modelling shallow mixed layers in the northeast Atlantic
780
Modelling shear bands in a volcanic conduit: Implications for over-pressures and extrusion-rates
781
Modelling sheath blight epidemics on rice tillers
782
Modelling sheltering effects of trees on reducing space heating in office buildings in a windy city
783
Modelling shifts in the wage–price and unemployment–inflation relationships in Italy, Poland and the UK
784
Modelling short and long-term risks in power markets: Empirical evidence from Nord Pool
785
Modelling short rotation forestry growth (Uppsala, Sweden, 24–26 October 1994)
786
Modelling short-term CO2 fluxes and long-term tree growth in temperate forests with ASPECTS
787
Modelling short-term CO2 fluxes and long-term tree growth in temperate forests with ASPECTS
788
Modelling short-term dynamics of suspended particulate matter in Venice Lagoon, Italy
789
Modelling shrinkage during convective drying of food materials: a review Original Research Article
790
Modelling Siberian river runoff — implications for contaminant transport in the Arctic Ocean
791
Modelling side-effect spray drying in top-spray fluidised bed coating processes Original Research Article
792
Modelling sieve tray hydraulics using computational fluid dynamics
793
Modelling silicitation of a clay buffer subject to opposing temperature and hydration gradients
794
Modelling silicon carbide formation during heating at constant rate
795
Modelling simultaneous precipitation reactions in austenitic stainless steels
796
Modelling simultaneous precipitation reactions in austenitic stainless steels
797
Modelling single and double-lap repairs on composite materials
798
Modelling single cell electroporation with bipolar pulse parameters and dynamic pore radii
799
Modelling SIR-type epidemics by ODEs, PDEs, difference equations and cellular automata – A comparative study
800
Modelling situation awareness for Context-aware Decision Support
801
Modelling skewness and kurtosis with the BCPE density in GAMLSS
802
Modelling skin permeability in risk assessment––the future
803
Modelling slit tape buckling during automated prepreg manufacturing: A local approach
804
Modelling slow wave activity in the small intestine
805
Modelling small-angle scattering data from micelles
806
MODELLING SMART STRUCTURES WITH SEGMENTED PIEZOELECTRIC SENSORS AND ACTUATORS
807
Modelling SMP and EPS formation and degradation kinetics with an extended ASM3 model Original Research Article
808
Modelling SN2 nucleophilic substitution at silicon by structural correlation with X-ray crystallography and NMR spectroscopy
809
Modelling Snow Slab Release Using a Temperature-Dependent Viscoelastic Finite Element Model with Weak Layers
810
Modelling SO2 concentration at a point with statistical approaches
811
Modelling socio-ecological tourism-based systems for sustainability
812
Modelling socio-ecological tourism-based systems for sustainability
813
Modelling sociophonetic variation
814
Modelling socio-technical transformations in wastewater treatment—A methodological proposal
815
Modelling soft body impact on composite structures
816
Modelling software development across time zones
817
Modelling soil anaerobiosis from water retention characteristics and soil respiration
818
Modelling soil anaerobiosis from water retention characteristics and soil respiration
819
Modelling soil carbon and nitrogen dynamics using measurable and conceptual soil organic matter pools in APSIM
820
Modelling soil carbon development in Swedish coniferous forest soils—An uncertainty analysis of parameters and model estimates using the GLUE method
821
Modelling soil carbon development in Swedish coniferous forest soils—An uncertainty analysis of parameters and model estimates using the GLUE method
822
Modelling soil detachment rates in rainfed agrosystems in the south-central Pyrenees
823
Modelling soil erosion in a clayey, subsurface-drained agricultural field with a three-dimensional FLUSH model
824
Modelling soil erosion reduction by Mahonia aquifolium on hillslopes in Hungary: The impact of soil stabilization by roots
825
Modelling soil fragmentation: the pore solid fractal approach
826
Modelling soil genesis in calcareous loess
827
Modelling soil landscape genesis — A “time split” approach for hummocky agricultural landscapes
828
Modelling soil nutrient dynamics under alternative farm management practices in the Northern Highlands of Ethiopia
829
Modelling soil organic carbon distribution in blanket peatlands at a landscape scale
830
Modelling soil organic carbon dynamics in the major agricultural regions of China
831
Modelling soil organic carbon dynamics in two long-term experiments of north-eastern Italy
832
Modelling soil physical behaviour with particular reference to soil science
833
Modelling soil quality changes in Europe. An impact assessment of land use change on soil quality in Europe
834
Modelling soil removal from snow avalanches: A case study in the North-Western Italian Alps
835
Modelling soil series data to facilitate targeted habitat restoration: a polytomous logistic regression approach
836
Modelling soil surface charge density using mineral composition
837
Modelling soil variation: past, present, and future
838
Modelling soil water dynamics in winter wheat using different estimates of canopy development
839
Modelling soil water dynamics in winter wheat using different estimates of canopy development
840
Modelling Soil Water Dynamics under Trickle Emitters - a Review
841
Modelling soil water retention scaling. Comparison of a classical fractal model with a piecewise approach
842
Modelling soil–sweep interaction with discrete element method
843
Modelling SOL flow pattern spreading in the edge plasma
844
Modelling solar effects on the heat and mass transfer in a street canyon, a simplified approach
845
Modelling solid solution hardening in stainless steels
846
Modelling solid-convective flash pyrolysis of straw and wood in the Pyrolysis Centrifuge Reactor
847
Modelling solitons under the hydrostatic and Boussinesq approximations
848
Modelling solubility of solid sulphur in natural gas
849
Modelling solubility of solids in supercritical fluids using fusion properties
850
Modelling solute transport in structured soils: performance evaluation of the ADR and TRM models
851
Modelling solute transport in the Tweed Estuary, UK using ECoS
852
Modelling solutions of hydrocarbons in dense CO2 gas
853
Modelling solvent effects on the absorption and emission spectra of constrained cyanines with both implicit and explicit QM/EFP models
854
Modelling some aspects of ion migration in a compacted bentonitic clay
855
Modelling Some Physical Characteristics of Pomegranate (Punica granatum L.) Fruit during Ripening Using Artificial Neural Network
856
Modelling some stationary Markov processes and related characterizations
857
Modelling soot and SOF emissions from a diesel engine
858
Modelling sorption and diffusion in activated carbon: a novel low pressure pulse-response technique Original Research Article
859
Modelling source rock production potentials for short-chain organic acids and CO2 — a multivariate approach
860
Modelling sources of sediment at sub-catchment scale: An example from the Burdekin catchment, North Queensland, Australia Original Research Article
861
Modelling sovereign credit ratings: Neural networks versus ordered probit
862
Modelling space-charge limited transport in discotic liquid crystals
863
Modelling space-time HIV/AIDS dynamics: Applications to disease control
864
Modelling spatial and temporal scales for spill-over and biomass exportation from MPAs and their potential for fisheries enhancement
865
Modelling spatial and temporal variability in a zero-inflated variable: The case of stone pine (Pinus pinea L.) cone production
866
Modelling spatial and temporal variability in a zero-inflated variable: The case of stone pine (Pinus pinea L.) cone production
867
Modelling spatial and temporal variations in the water quality of an artificial water reservoir in the semiarid Midwest of Argentina Original Research Article
868
Modelling spatial closures and fishing effort restrictions in the Faroe Islands marine ecosystem
869
Modelling spatial closures and fishing effort restrictions in the Faroe Islands marine ecosystem
870
Modelling spatial distribution of defects and estimation of electrical degradation of silicon detectors in radiation fields at high luminosity
871
Modelling spatial distribution of epibenthic communities in the Gulf of St. Lawrence (Canada)
872
Modelling spatial distribution of hard bottom benthic communities and their functional response to environmental parameters
873
Modelling spatial distribution of hard bottom benthic communities and their functional response to environmental parameters
874
Modelling spatial distribution of the Croatian marine benthic habitats
875
Modelling spatial distribution of the Croatian marine benthic habitats
876
Modelling spatial heterogeneity in grazed grassland and its effects on nitrogen cycling and greenhouse gas emissions
877
Modelling spatial heterogeneity of phytoplankton in Lake Mangueira, a large shallow subtropical lake in South Brazil
878
Modelling spatial heterogeneity of phytoplankton in Lake Mangueira, a large shallow subtropical lake in South Brazil
879
Modelling spatial intensity for replicated inhomogeneous point patterns in brain imaging
880
Modelling spatial scales of water erosion in the West Usambara Mountains of Tanzania
881
Modelling spatial variability and uncertainty of cadmium leaching to groundwater in an urban region
882
Modelling Spatial Whole–Part relationships using an ISO-TC211 conformant approach
883
Modelling spatial–temporal covariance structures in monocropping barley trials
884
Modelling spatio-temporal data: A new variogram and covariance structure proposal
885
Modelling spatio-temporal environmental data
886
Modelling spatio-temporal movement of tourists using finite Markov chains Original Research Article
887
Modelling spatio-temporal near-surface temperature variation in high mountain landscapes
888
Modelling spatio-temporal near-surface temperature variation in high mountain landscapes
889
Modelling spatiotemporal olfactory data in two steps: from binary to Hodgkin-Huxley neurones
890
Modelling spatiotemporal olfactory data in two steps: from binary to Hodgkin–Huxley neurones
891
Modelling spatio-temporal variability of Mytilus edulis (L.) growth by forcing a dynamic energy budget model with satellite-derived environmental data
892
Modelling species and spacing effects on root zone water dynamics using Hydrus-2D in an Amazonian agroforestry system
893
Modelling species distributions with penalised logistic regressions: A comparison with maximum entropy models
894
Modelling species distributions with penalised logistic regressions: A comparison with maximum entropy models
895
Modelling species extinction: the case for non-consumptive values
896
Modelling species richness and life form composition in Sahelian Burkina Faso with remote sensing data
897
Modelling species’ range shifts in a changing climate: The impacts of biotic interactions, dispersal distance and the rate of climate change
898
Modelling spectral irradiance in freshwater in relation to phytoplankton and solar radiation
899
Modelling spectral irradiance in freshwater in relation to phytoplankton and solar radiation
900
Modelling spectral properties of non-equilibrium atomic hydrogen plasma
901
Modelling spectral properties of non-equilibrium atomic hydrogen plasma
902
Modelling spikes in electricity markets using excitable dynamics
903
Modelling spoilage of fresh turbot and evaluation of a time–temperature integrator (TTI) label under fluctuating temperature
904
Modelling sponge species diversity using a morphological predictor: a tropical test of a temperate model
905
Modelling spontaneous afforestation in Postojna area, Slovenia
906
Modelling spontaneous ignition of wood, char and RDF in a lab-scale packed bed
907
Modelling squared returns using a SETAR model with long-memory dynamics
908
Modelling stand development after partial harvests: An empirically based, spatially explicit analysis for lowland black spruce
909
Modelling stand development after partial harvests: An empirically based, spatially explicit analysis for lowland black spruce
910
Modelling starch digestion in sweetpotato with biphasic digestograms Original Research Article
911
Modelling start of oak pollen season in different climatic zones in Spain
912
Modelling static and dynamic behaviour of proton exchange membrane fuel cells on the basis of electro-chemical description
913
Modelling stiffness of polymer/clay nanocomposites
914
Modelling stiffness-damage behaviour of (± 45/90)s and (90/±45)s glass fibre reinforced polymer laminates
915
Modelling stiffness-damage behaviour of (± 45/90)s and (90/±45)s glass fibre reinforced polymer laminates
916
Modelling STM images of TiO2(1 1 0) from first-principles: Defects, water adsorption and dissociation products
917
Modelling stochastic decision systems using dependent-chance programming
918
Modelling stochastic mortality for dependent lives
919
Modelling stomatal ozone flux across Europe
920
Modelling stomatal ozone flux and deposition to grassland communities across Europe
921
Modelling stomatal responses of spring wheat (Triticum aestivum L. cv. Turbo) to ozone and different levels of water supply
922
Modelling storm-induced beach/dune evolution: Sefton coast, Liverpool Bay, UK
923
Modelling strain-rate-dependency of natural soft clays combined with anisotropy and destructuration
924
Modelling strategic alliances in the wide-body long-range aircraft market
925
Modelling strategies for the management of the critically endangered Carpentarian rock-rat (Zyzomys palatalis) of northern Australia
926
Modelling stream recession flows
927
Modelling stream sediment concentration: An assessment of enhanced rainfall and storm frequency
928
Modelling stream–aquifer seepage in an alluvial aquifer: an improved loosing-stream package for MODFLOW
929
Modelling streamflow in a large anastomosing river of the arid zone, Diamantina River, Australia
930
Modelling streaming potential (SP) signals induced by water movement in the vadose zone
931
Modelling streamline curvature effects in explicit algebraic Reynolds stress turbulence models
932
Modelling strength of cracked friction stir welded panels by means of the crack tip opening angle (CTOA)
933
Modelling stress reduction techniques of cold compression and stretching in wrought aluminium alloy products
934
Modelling stress–strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach
935
Modelling stress–strain and volume change behaviour of unsaturated soils using an evolutionary based data mining technique, an incremental approach
936
MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS
937
MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 2: NUMERICAL SIMULATION
938
Modelling structural and plasma facing materials for fusion power plants: Recent advances and outstanding issues in the EURATOM fusion materials programme
939
Modelling structural breaks, long memory and stock market volatility: an overview
940
Modelling structural change in the UK housing market: A comparison of alternative house price models
941
Modelling structural recovery in amorphous polymers
942
Modelling structured geothermal systems II: Application of linear stability analysis
943
Modelling structured geothermal systems: Application of dimensional methods
944
Modelling structures in generic space, a condition for adaptiveness of monitoring cognitive agent
945
Modelling studies for high temperature aerosol formation in laminar flow reactors
946
Modelling studies of amorphous In–Se films
947
Modelling studies of NO3 nighttime chemistry and its effects on subsequent ozone formation
948
Modelling studies of sheet metal formability of friction stir processed Mg AZ31B alloy under stretch forming
949
Modelling studies of the active site of human sorbitol dehydrogenase: an approach to structure-based inhibitor design of the enzyme
950
Modelling studies on neurodegenerative disease-causing triplet repeat sequences d(GGC/GCC)n and d(CAG/CTG)n
951
Modelling studies on the binding of substrate and inhibitor to the active site of human sorbitol dehydrogenase
952
Modelling studies on the processes that influence matter transfer on the Gulf of Thermaikos (NW Aegean Sea)
953
Modelling study of CO2 poisoning on PEMFC anodes
954
Modelling study of microscopic sliding on irregular substrates
955
Modelling study of sea breezes in a complex coastal environment
956
Modelling study of the impact of isoprene and terpene biogenic emissions on European ozone levels
957
Modelling study of the optimal operation conditions of CO2 capture from natural gas using activated Methyldiethanol amine.
958
Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials
959
Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials
960
Modelling study, analysis and robust servo control of pneumatic cylinder actuator systems
961
Modelling subaqueous bipartite sediment gravity flows on the basis of outcrop constraints: first results
962
Modelling subdivided populations: Genetic Structure and Selection in Subdivided Populations by F. Rousset. Princeton University Press, 2003. £26.95 pbk (288 pages) ISBN 0 691 08817 9
963
Modelling subgrid scale dry deposition velocity of O3 over the Swedish west coast with MM5-PX model
964
Modelling subjectivity in visual perception of orientation for image retrieval
965
Modelling submarine groundwater discharge: an example from the western Baltic Sea
966
Modelling substitution between domestic and outbound tourism in Australia: A system-of-equations approach
967
Modelling subsurface drainage pathways in an artificial catchment
968
Modelling Subsurface Heterogeneity by Coupled Markov Chains: Directional Dependency, Walther’s Law and Entropy
969
Modelling subsurface temperatures in a heat producing coal waste rock pile, Svalbard (78°N)
970
Modelling succession to include a herbivore effect
971
Modelling succession to include a herbivore effect
972
Modelling successive h-indices
973
Modelling suicide risk in later life
974
Modelling suitable estuarine habitats for Zostera noltii, using Ecological Niche Factor Analysis and Bathymetric LiDAR
975
Modelling supercooling in frozen strawberries: Experimental analysis, cellular automation and inverse problem methodology Original Research Article
976
Modelling super-equilibrium in biomass gasification with the constrained Gibbs energy method
977
Modelling supervisory control systems using fuzzy cognitive maps
978
Modelling supply and demand of bioenergy from short rotation coppice and Miscanthus in the UK
979
Modelling surface drifting of buoys during a rapidly-moving weather front in the Gulf of Finland, Baltic Sea
980
Modelling surface energy fluxes over maize using a two-source patch model and radiometric soil and canopy temperature observations
981
Modelling surface pH and emissions of hydrogen sulphide, ammonia, acetic acid and carbon dioxide from a pig waste lagoon
982
Modelling surface pressure fluctuations on medium-rise buildings
983
Modelling surface radioactive spill dispersion in the Alborán Sea
984
Modelling surface radioactive, chemical and oil spills in the Strait of Gibraltar
985
Modelling surface resistance from climatic variables?
986
Modelling surface rheology of complex interfaces with extended irreversible thermodynamics
987
Modelling surface thermal damage to hot mill rolls
988
Modelling surfaces from planar irregular meshes Original Research Article
989
Modelling surfactant-enhanced remediation of polycyclic aromatic hydrocarbons
990
Modelling survival kinetics of Staphylococcus aureus and Escherichia coli O157:H7 on stainless steel surfaces soiled with different substrates under static conditions of temperature and relative humidity Original Research Article
991
Modelling survival probability of individual trees in Norway spruce stands under different thinning regimes
992
Modelling susceptibility of coral reefs to environmental stress using remote sensing data and GIS models
993
Modelling susceptibility of coral reefs to environmental stress using remote sensing data and GIS models
994
Modelling Suspended Sediment Concentrations in the Firth of Forth
995
Modelling suspended sediment deposition on a fluvial floodplain using a two-dimensional dynamic finite element model
996
Modelling sustainability Original Research Article
997
Modelling sustainability: Comparing an econometric (PANTA RHEI) and a systems dynamics model (SuE)
998
Modelling sustainable bioenergy potentials from agriculture for Germany and Eastern European countries
999
Modelling sustainable development as a problem in earth science
1000
Modelling sustainable development: An economy-ecology integrated model