<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Experimental and DFT study of the aza-Diels–Alder reaction between cyclopentadiene and protonated benzylimine derivated from glyoxylates
2
Experimental and DFT study of the conversion of ephedrine derivatives into oxazolidinones. Double SN2 mechanism against SN1 mechanism
3
Experimental and DFT study on a newly synthesized ethyl 2-cyano-3-[5-(phenyl-hydrazonomethyl)-1H-pyrrol-2-yl]-acrylate
4
Experimental and DFT study on pyrrole tosylhydrazones
5
Experimental and DFT study on the complexation of with a hexaarylbenzene-based receptor
6
Experimental and DFT theoretical studies of SERS effect on gold nanowires array
7
Experimental and dynamic system simulation and optimization of a centrifugal pump-coupling-engine system. Part 1: Failure identification
8
Experimental and dynamic system simulation and optimization of a centrifugal pump-coupling-engine system. Part 2: System design
9
Experimental and economic study of a greenhouse thermal control system using aquifer water
10
Experimental and economical evaluation of a novel biogas digester
11
Experimental and epidemiological data on particulates come together
12
Experimental and estimated saturated vapour pressures of aroma compounds
13
Experimental and FDM Study on Geogrid-Soil Interaction by Reformed Direct Shear Test Apparatus
14
Experimental and FDTD-computed radiation patterns of cellular telephones held in slanted operational conditions
15
Experimental and FE displacement and polymerization stress of bonded restorations as a function of the C-Factor, volume and substrate stiffness
16
Experimental and FE displacement and polymerization stress of bonded restorations as a function of the C-Factor, volume and substrate stiffness
17
Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics
18
Experimental and FEM analysis of reduced beam section moment endplate connections under cyclic loading
19
Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
20
Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading
21
Experimental and FEM failure analysis and optimization of a centrifugal-pump volute casing
22
Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings
23
Experimental and FEM study of windshield subjected to high speed bird impact
24
Experimental and FEM study on sinking of miniature inner grooved copper tube
25
Experimental and FEM-supported investigation of wet ceramic clay extrusion for the determination of stress distributions on the applied tools’ surfaces
26
Experimental and field evidence for thiyl radical-induced stereomutation of alkenones and other lipids in sediments and seawater
27
Experimental and field investigations on the role of birds as hosts of Leishmania infantum, with emphasis on the domestic chicken
28
Experimental and Field Study on Accumulationccumulation of Heavy Metalsetals in Seagrasses (Halodule pinifolia and Halophila minor) IN SETIU WETLAND, TERENGGANU
29
Experimental and financial investigation of asymmetrical solar stills with different insulation
30
Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with BackPressure
31
Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP
32
Experimental and finite element analysis of a very large pultruded FRP structure subjected to free vibration
33
Experimental and finite element analysis of fatigue performance of copper power conductors
34
Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives
35
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming
36
Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot
37
Experimental and finite element analysis of the rat ulnar loading model—correlations between strain and bone formation following fatigue loading
38
Experimental and finite element analysis of the shear speed effects on the Sn–Ag and Sn–Ag–Cu BGA solder joints
39
Experimental and finite element analysis of the shear speed effects on the Sn–Ag and Sn–Ag–Cu BGA solder joints
40
Experimental and finite element analysis on the performance of vacuum-assisted resin infused single scarf repairs
41
Experimental and finite element analysis on the steel fiber-reinforced concrete (SFRC) beams ultimate behavior
42
Experimental and finite element analysis to identify the source of vibration of a coach
43
Experimental and finite element investigation of semi-constrained groove pressing process
44
Experimental and finite element investigation of void nucleation in rubber-like materials
45
Experimental and finite element investigations on the collapse of a Mero space truss roof structure – A case study
46
Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
47
Experimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction
48
Experimental and finite element simulation study of the adiabatic shear band phenomenon in cold heading process
49
Experimental and finite element simulations of cold pressure welding of aluminium by divergent extrusion
50
Experimental and finite element studies of the divergent extrusion process under conditions applicable to cold pressure welding of commercial purity aluminium
51
Experimental and Finite Element Studies on CFF Strengthened RC Rectangular Beams in Shear
52
Experimental and Finite Element Studies on Free Vibration of Areca Leaf Sheath Reinforced Polymer Composites
53
Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle
54
Experimental and finite element studies on free vibration of skew plates
55
Experimental and finite element study of one span concrete bridge bent designed by the requirements of the 1970s, under gravity and lateral load
56
Experimental and finite element study of profiled steel sheet dry board folded plate structures
57
Experimental and finite element study of ultimate strength of continuous composite concrete slabs with steel decking
58
Experimental and finite element study on the compression properties of Modified Rectangular Fiber-Reinforced Elastomeric Isolators (MR-FREIs)
59
Experimental and finite element study on the spring back of double curved aluminum/polypropylene/aluminum sandwich sheet
60
Experimental and Finite Element Study to Determine the Mechanical Properties and Bond Between Repair Mortars and Concrete Substrates
61
Experimental and finite-element analysis of the anisotropic response of high-purity α-titanium in bending Original Research Article
62
Experimental and finite-element free vibration analysis and artificial neural network based on multi-crack diagnosis of non-uniform crosssection beam
63
Experimental and finite-element free vibration analysis and artificial neural network based on multi-crack diagnosis of non-uniform cross-section beam
64
Experimental and full multiple scattering approaches to energy-loss near-edge structures (ELNES) for c-Si, a-Si and a-Si:H
65
Experimental and geochemical evidence for derivation of the El Capitan Granite, California, by partial melting of hydrous gabbroic lower crust
66
Experimental and geologic evaluation of monazite (U–Th)/He thermochronometry: Catnip Sill, Catalina Core Complex, Tucson, AZ
67
Experimental and high-order LES analysis of the flow in near-wall region of a square cylinder
68
Experimental and Image Processing Investigation on the Diffusion of Dust Particles in the Atmospheric Area
69
Experimental and Image Processing Study on the Effect of the Cavitation Phenomenon in a Nozzle Injector on the Hydrodynamic Behavior of the Spray
70
Experimental and in situ study of radiocaesium transfer across the sediment–water interface and mobility in lake sediments
71
Experimental and kinetic modeling of the reduction of NO by propene at 1 atm
72
Experimental and Kinetic Modeling Studies on Extraction of Essential Oil from Vietnamese Calamondin (Citrus microcarpa) by Hydro-Distillation Process
73
Experimental and kinetic modeling study of 2,5-dimethylfuran pyrolysis at various pressures
74
Experimental and kinetic modeling study of 2-butanol pyrolysis and combustion
75
Experimental and kinetic modeling study of ethyl butanoate oxidation in a laminar tubular plug flow reactor
76
Experimental and kinetic modeling study of i-butanol pyrolysis and combustion
77
Experimental and kinetic modeling study of methyl butanoate and methyl butanoate/methanol flames at different equivalence ratios and C/O ratios
78
Experimental and kinetic modeling study of NO oxidation: Comparison of Fe and Cu-zeolite catalysts
79
Experimental and kinetic modeling study of PAH formation in methane coflow diffusion flames doped with n-butanol
80
Experimental and kinetic modeling study of pyrolysis and oxidation of n-decane
81
Experimental and kinetic modeling study of the oxidation of n-propylbenzene
82
Experimental and kinetic modeling study of the reduction of NO by hydrocarbons and interactions with SO2 in a JSR at 1 atm☆
83
Experimental and kinetic modeling study of trans-methyl-3-hexenoate oxidation in JSR and the role of CC double bond
84
Experimental and kinetic modeling study on methylcyclohexane pyrolysis and combustion
85
Experimental and kinetic modelling studies on the acid-catalysed hydrolysis of the water hyacinth plant to levulinic acid
86
Experimental and Kinetic Studies of Aromatic Hydrogenation, Hydrodesulfurization, and Hydrodenitrogenation of Light Gas Oils Derived from Athabasca Bitumen
87
Experimental and kinetic studies of the ethanol steam reforming reaction equipped with ultrathin Pd and Pd–Cu membranes for improved conversion and hydrogen yield
88
Experimental and kinetic studies on methylene blue adsorption by coir pith carbon
89
Experimental and kinetic study of autoignition in methane/ethane/air and methane/propane/air mixtures under engine-relevant conditions
90
Experimental and Kinetic Study of CO Oxidation Over LaFe1-xCuxO3 (x=0, 0.2, 0.4, 0.6) Perovskite-Type Oxides
91
Experimental and kinetic study of NO oxidation on model Pt catalysts
92
Experimental and kinetic study of the NO-reduction by tar formed from biomass gasification, using benzene as a tar model component
93
Experimental and kinetic study on ignition delay times of DME/H2/O2/Ar mixtures
94
Experimental and large eddy simulation results for the purging of salt water from a cavity by an overflow of fresh water
95
Experimental and LES Studies of Propane–air Premixed Gases in Pipelines Containing Mixed Obstacles
96
Experimental and macroscopic investigation of dynamic crack patterns in PVB laminated glass sheets subject to light-weight impact
97
Experimental and Mathematical Investigation of TimeDependence of Contaminant Dispersivity in Soil
98
Experimental and mathematical methods for representing relative surface elongation of the ACL
99
Experimental and mathematical model of the interactions in the mixed culture of links in the “producer–consumer” cycle Original Research Article
100
Experimental and mathematical modeling for fracture of rock joint with regular asperities
101
Experimental and mathematical modeling of the consumer’s influence on productivity of algae in a model aquatic ecosystem Original Research Article
102
EXPERIMENTAL AND MATHEMATICAL MODELING STUDY FOR SOLAR DRYING OF MINT
103
EXPERIMENTAL AND MATHEMATICAL STUDY OF WAVE IMPACT PRESSURE FORCE ON INCLINED SEA WALLS
104
Experimental and MC determination of HPGe detector efficiency in the 40–2754 keV energy range for measuring point source geometry with the source-to-detector distance of 25 cm
105
Experimental and MCNP simulated gamma-ray spectra for the UNCOSS neutron-based explosive detector
106
Experimental and MCNP simulated gamma-ray spectra for the UNCOSS neutron-based explosive detector
107
Experimental and mechanical model for predicting the behaviour of minor axis beam-to-column semi-rigid joints
108
Experimental and mechanical model for predicting the behaviour of minor axis beam-to-column semi-rigid joints
109
Experimental and mechanical model for predicting the behaviour of minor axis beam-to-column semi-rigid joints
110
Experimental and micro-mechanical analysis of the mechanical and transport properties of mortar containing heat-induced micro-cracks
111
Experimental and microstructural characterization of simultaneous creep, plasticity and phase transformation in image high-temperature shape memory alloy Original Research Article
112
Experimental and model assisted investigation of an operational strategy for the BPR under low influent concentrations
113
Experimental and model-based analysis of membrane reactor performance for methane oxidative coupling: Effect of radial heat and mass transfer
114
Experimental and modeled deposition kinetics of large colloidal particles
115
Experimental and modeling analysis of a batch gasification/pyrolysis reactor
116
Experimental and modeling analysis of a ground source heat pump system
117
Experimental and modeling analysis of highly oriented octithiophene thin films
118
Experimental and modeling analysis of the effect of catalyst aging on the performance of a short contact time adiabatic CH4-CPO reactor
119
Experimental and modeling approach to study sorption of dissolved hydrophobic organic contaminants to microbial biofilms
120
Experimental and modeling approaches of MR behaviors under large step strains
121
Experimental and modeling approaches of MR behaviors under large step strains
122
Experimental and modeling approaches of MR behaviors under large step strains
123
Experimental and modeling investigation of kinetics of methane gas hydrate formation in water-in-oil emulsion
124
Experimental and modeling investigation of the failure resistance of Advanced High Strength Steels spot welds
125
Experimental and modeling investigation of the low-temperature oxidation of n-heptane
126
Experimental and modeling investigation on SiCp distribution in powder metallurgy processed SiCp/2024 Al composites
127
Experimental and modeling investigation on structure H hydrate formation kinetics
128
Experimental and modeling investigations of wastewater filtration Original Research Article
129
Experimental and modeling kinetic study of the CO2 absorption by Li4SiO4
130
Experimental and Modeling of Densities and Viscosities of Binary Mixtures Containing MTBE/Alkan-2-ol
131
Experimental and modeling of fixed-bed reactor for yellow phosphorous tail gas purification over impregnated activated carbon
132
Experimental and modeling of selective separation of gold(III) ions from aqueous solutions by emulsion liquid membrane system
133
Experimental and Modeling of Tomato Slices Sorption Isotherms and Thin Layer Drying Kinetics for a Solar Drying Plant Design
134
Experimental and modeling results of a parallel plate-based active magnetic regenerator
135
Experimental and modeling results of creep–fatigue life of Inconel 617 and Haynes 230 at 850 °C
136
Experimental and modeling studies of a rich H2/CO/N2O/Ar flame
137
Experimental and modeling studies of acetylene detection in hydrogen/acetylene mixtures on PdM bimetallic metal–insulator–semiconductor devices
138
Experimental and modeling studies of C2H4/O2/Ar, C2H4/methylal/O2/Ar and C2H4/ethylal/O2/Ar rich flames and the effect of oxygenated additives
139
Experimental and modeling studies of sorption of ceria nanoparticle on microbial biofilms
140
Experimental and modeling studies of sorption of tetracycline onto iron oxides-coated quartz
141
Experimental and modeling studies of the effects of shear stress on magnetization in nickel
142
Experimental and modeling studies of ultrasound-assisted release of phenolics from oak chips into model wine
143
Experimental and modeling studies of ultrasound-assisted release of phenolics from oak chips into model wine
144
Experimental and modeling studies on Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) tubular membranes for air separation
145
Experimental and modeling studies on extraction of cholesterol from cow brain using supercritical carbon dioxide
146
Experimental and modeling studies on phase stability of nanocrystalline magnetic Sm2Co7
147
Experimental and modeling studies on sorption and diffusion of radium in bentonite
148
Experimental and modeling studies on sulfur solubility in sour gas
149
Experimental and Modeling Studies on the Absorption of NO in Aqueous Ferrous EDTA Solutions
150
Experimental and modeling studies on the asphaltene precipitation in degassed and gas-injected reservoir oils
151
Experimental and modeling studies on the hydrate formation of CO2 and CO2-rich gas mixtures
152
Experimental and modeling studies on the solubility of CO2, CHC1F2, CHF3, C2H2F4 and C2H4F2 in water and aqueous NaCl solutions under low pressures
153
Experimental and modeling studies on the viscosity of (diesel oil + water + anti-agglomerant) system at high pressures
154
Experimental and modeling studies on thermosiphon domestic solar water heaters with flat-plate collectors at clear nights
155
Experimental and modeling study of a lean premixed iso-butene/hydrogen/oxygen/argon flame
156
Experimental and modeling study of a membrane filtration process using ceramic membranes to increase retroviral pseudotype vector titer
157
Experimental and modeling study of a two-stage pilot scale high solid anaerobic digester system
158
Experimental and modeling study of adsorption in preparative monolithic silica column
159
Experimental and modeling study of adsorption–desorption processes with application to a deep-well injection radioactive waste disposal site
160
Experimental and modeling study of chemical-kinetics mechanisms for H2–NH3–air mixtures in laminar premixed jet flames
161
Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete
162
Experimental and modeling study of flash calcination of kaolinite rich clay particles in a gas suspension calciner
163
Experimental and modeling study of formaldehyde combustion in flames
164
Experimental and modeling study of high-strength structural steel under cyclic loading
165
Experimental and modeling study of hydrogen/syngas production and particulate emissions from a natural gas-fueled partial oxidation engine
166
Experimental and modeling study of laminar burning velocity of biomass derived gases/air mixtures
167
Experimental and modeling study of lean premixed atmospheric-pressure propane/O2/N2 flames
168
Experimental and modeling study of MEUF removal of naphthenic acids Original Research Article
169
Experimental and modeling study of oxygen permeation modes for asymmetric mixed-conducting membranes
170
Experimental and modeling study of performance and emissions of SI engine fueled by natural gas–hydrogen mixtures
171
Experimental and modeling study of pinewood char gasification with CO2
172
Experimental and modeling study of single coal particle combustion in O2/N2 and Oxy-fuel (O2/CO2) atmospheres
173
Experimental and modeling study of solid oxide fuel cell operating with syngas fuel
174
Experimental and modeling study of the autoignition of 1-hexene/isooctane mixtures at low temperatures
175
Experimental and modeling study of the auto-ignition of n-heptane/n-butanol mixtures
176
Experimental and modeling study of the effect of CH4 and pulverized coal on selective non-catalytic reduction process Original Research Article
177
Experimental and modeling study of the effect of CO and H2 on the urea DeNOx process in a 150 kW laboratory reactor Original Research Article
178
Experimental and modeling study of the effect of ethanol and MTBE on the oxidation of PRF90 in low pressure premixed laminar flame
179
Experimental and modeling study of the effects of adding oxygenated fuels to premixed n-heptane flames
180
Experimental and modeling study of the gas-phase oxidation of methyl and ethyl tertiary butyl ethers
181
Experimental and modeling study of the kinetics of oxidation of ethanol-n-heptane mixtures in a jet-stirred reactor
182
Experimental and modeling study of the oxidation of n- and iso-butanal
183
Experimental and modeling study of the oxidation of natural gas in a premixed flame, shock tube, and jet-stirred reactor
184
Experimental and modeling study of the oxidation of n-butylbenzene
185
Experimental and modeling study of the phase behavior of synthetic crude oil + CO2
186
Experimental and Modeling Study of the Solubility of Carbon Dioxide in Aqueous 30 Mass % 2-((2-Aminoethyl)amino)ethanol Solution
187
Experimental and modeling study of the thermal decomposition of methyl decanoate
188
Experimental and modeling study of thermal and catalytic cracking of n-decane
189
Experimental and modeling study of thermal and catalytic cracking of n-decane
190
Experimental and modeling study on auto-ignition characteristics of methane/hydrogen blends under engine relevant pressure
191
Experimental and modeling study on ignition delays of lean mixtures of methane, hydrogen, oxygen, and argon at elevated pressures
192
Experimental and modeling study on long-term alteration of compacted bentonite with alkaline groundwater
193
Experimental and modeling study on nitric oxide removal in a biotrickling filter using Chelatococcus daeguensis under thermophilic condition
194
Experimental and modeling study on the high-temperature oxidation of Ammonia and related NOx chemistry
195
Experimental and modeling study on the influences of methanol on premixed fuel-rich n-heptane flames
196
Experimental and modeling study on the oxidation of Jet A and the n-dodecane/iso-octane/n-propylbenzene/1,3,5-trimethylbenzene surrogate fuel
197
Experimental and modelling analysis of As(V) ions adsorption on granular activated carbon
198
Experimental and modelling analysis of pesticide fate from greenhouses: The case of pyrimethanil on a tomato crop
199
Experimental and Modelling Approaches for the Assessment of Chemical Impacts of Leachate Migration from Landfills: A Case Study of a Site on the Triassic Sandstone Aquifer in the UK East Midlands
200
Experimental and modelling aspects in microstructured reactors applied to environmental catalysis
201
Experimental and modelling aspects of abrasive wear of a A357 aluminium alloy under gross slip fretting conditions
202
Experimental and modelling assessment of precipitation kinetics in an Al–Li–Mg alloy Original Research Article
203
Experimental and modelling investigation of learning a fast elbow flexion in the horizontal plane
204
Experimental and modelling investigation of surface EMG spike analysis
205
Experimental and modelling investigation of the thermal decomposition of n-dodecane
206
Experimental and modelling investigations of the biogeochemistry of gas production from low and intermediate level radioactive waste
207
Experimental and modelling of the thermal regions of activity during pyrolysis of bituminous coals
208
Experimental and modelling performances of a roof-integrated solar drying system for drying herbs and spices
209
Experimental and modelling research of the accelerated calcium leaching of cement paste in ammonium nitrate solution
210
Experimental and modelling studies into high temperature phase transformations
211
Experimental and modelling studies of CO poisoning in PEM fuel cells
212
Experimental and modelling studies of ion exchange equilibria between zeolite NaY and an electrolytic solution of iron
213
Experimental and modelling studies of the catalytic combustion of methane
214
Experimental and modelling studies of the effects of methanol and ethanol addition on the laminar premixed low-pressure n-heptane/toluene flames
215
Experimental and modelling studies of the flow properties of concentrated yogurt as affected by the storage time Original Research Article
216
Experimental and modelling studies of the flow properties of maize and waxy maize starch pastes
217
Experimental and modelling studies of the thermodynamics and kinetics of phase and structural transformations in a gamma TiAl-based alloy
218
Experimental and modelling studies of the thermodynamics and kinetics of phase and structural transformations in a gamma TiAl-based alloy
219
Experimental and modelling studies of the thermodynamics and kinetics of phase and structural transformations in a gamma TiAl-based alloy
220
Experimental and modelling studies of transport in starch nanocomposite films as affected by relative humidity
221
Experimental and modelling studies on diffusion of Cs, Ni and Sm in granodiorite, basalt and mudstone
222
Experimental and modelling studies on the pH buffering of MX-80 bentonite porewater
223
Experimental and modelling study of Plutonium uptake by suspended matter in aquatic environments from southern Spain
224
Experimental and modelling study on flow resistance of wire gauzes
225
Experimental and modelling study on the uptake and desorption kinetics of 133Ba by suspended estuarine sediments from southern Spain
226
Experimental and molecular dynamics simulation analysis of LaCrO3 precipitation in chromia scales Original Research Article
227
Experimental and molecular dynamics simulation studies of friction behavior of hydrogenated carbon films
228
Experimental and molecular dynamics studies of the thermal decomposition of a polyisobutylene binder Original Research Article
229
Experimental and molecular dynamics study on the inhibition performance of some nitrogen containing compounds for iron corrosion
230
Experimental and molecular modelling study of the three-phase behaviour of (propane + carbon dioxide + water) at reservoir conditions
231
Experimental and Monte Carlo investigation of neutron detection by THGEM detector in SQS mode
232
Experimental and Monte Carlo simulation studies of open cylindrical radon monitoring device using CR-39 detector
233
Experimental and Monte Carlo simulation: the role of urea in mullite synthesis
234
Experimental and Monte Carlo studies on the response of CR-39 detectors to Am-Be neutron spectrum
235
Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs)
236
Experimental and multiscale modeling of thermal conductivity and elastic properties of PLA/expanded graphite polymer nanocomposites
237
Experimental and multiscale numerical simulation of tensile strength of a randomly oriented short fiber composite in a brittle matrix
238
EXPERIMENTAL AND NEURAL NETWORK PREDICTION OF ELONGATION AND SPREAD AFTER FIRST STAGE OF FULLERING
239
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations
240
Experimental and Nonlinear Dynamic Analysis of Hybrid Powder Rubberized-Normal Concrete under Impact Load
241
Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates
242
Experimental and numerical analyses of a hydrogen and deuterium storage system
243
Experimental and Numerical Analyses of Alfa/Polyester Composite Under Three-Point Bending
244
Experimental and numerical analyses of explosive free forming
245
Experimental and numerical analyses of homogeneity over strip width in roll compaction
246
Experimental and numerical analyses of instrumented and continuous indentation of treated steels
247
Experimental and numerical analyses of long carbon fiber reinforced concrete panels exposed to blast loading
248
Experimental and numerical analyses of magnetic effect on OH radical distribution in a hydrogen-oxygen diffusion flame
249
Experimental and numerical analyses of residual stress distributions in TIG welding process for 304L stainless steel
250
Experimental and numerical analyses of sheet hydroforming process for production of an automobile body part
251
Experimental and Numerical Analyses of Steel-concrete Composite Floors
252
Experimental and numerical analyses on LiSO4 and Li2TiO3 pebble beds used in a ITER test blanket module
253
Experimental and numerical analyses on the stiffness of three-dimensional woven carbon preform reinforced cellular matrix composites
254
Experimental and numerical analyses on the stiffness of three-dimensional woven carbon preform reinforced cellular matrix composites
255
Experimental and numerical analyses on three-roll planetary rolling process
256
Experimental and numerical analyses to enhance the performance of a microturbine diffuser
257
Experimental and numerical analysis of a bus component in composite material
258
Experimental and numerical analysis of a chilly bin incorporating phase change material
259
Experimental and numerical analysis of a composite bridge for high-speed trains
260
Experimental and numerical analysis of a cross-flow closed wet cooling tower
261
Experimental and numerical analysis of a halved and tabled traditional timber scarf joint
262
Experimental and numerical analysis of a lab-scale fluid energy mill
263
Experimental and numerical analysis of a lean premixed stratified burner using 1D Raman/Rayleigh scattering and large eddy simulation
264
Experimental and numerical analysis of a multi-stiffened pure aluminium shear panel
265
Experimental and numerical analysis of a radial flow solid oxide fuel cell
266
Experimental and numerical analysis of a small-scale turbojet engine
267
Experimental and numerical analysis of a stop-splayed traditional timber scarf joint with key
268
Experimental and numerical analysis of a tube-type networked solar still for desert technology Original Research Article
269
Experimental and numerical analysis of a variable area ratio steam ejector
270
Experimental and numerical analysis of a waterproofing adhesive layer used on concrete-bridge decks
271
Experimental and numerical analysis of air and radiant cooling systems in offices
272
Experimental and Numerical Analysis of Ambient Crosswind Effects on a Floating Solar Chimney Power Plant Performance
273
Experimental and numerical analysis of an innovative GFRP sandwich floor panel under point load
274
Experimental and numerical analysis of automotive gearbox rattle noise
275
Experimental and numerical analysis of bending angle variation and longitudinal distortion in laser forming process
276
Experimental and numerical analysis of bending–buckling mixed failure of brickwork walls
277
Experimental and numerical analysis of buoyancy-induced flow in inclined triangular enclosures
278
Experimental and numerical analysis of cavitation in hydraulic proportional directional valves
279
Experimental and numerical analysis of convective heat transfer in turbulent channel flow with square and circular columns
280
Experimental and numerical analysis of delamination growth in double cantilever laminated beams
281
Experimental and numerical analysis of dry contact in the pin on disc test
282
Experimental and numerical analysis of dynamic metal hydride hydrogen storage systems
283
Experimental and numerical analysis of dynamic plastic behavior of long metallic bars under axial impact
284
Experimental and numerical analysis of E-stubs in three dimensional joints: A new analytical formulation for the stiffness calculation
285
Experimental and numerical analysis of floating floor resonance and its effect on impact sound transmission
286
Experimental and Numerical Analysis of Flow and Heat Transfer in a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant
287
Experimental and numerical analysis of friction and wear behavior of polycarbonate
288
Experimental and numerical analysis of gas distribution in molten carbonate fuel cells
289
Experimental and numerical analysis of gas entrapment defects in plate ADC12 die castings
290
Experimental and numerical analysis of heat losses in a liquid nitrogen cryostat
291
Experimental and numerical analysis of heat transfer including viscous dissipation in a scraped surface heat exchanger
292
Experimental and numerical analysis of heat transfer phenomena in a sensor tube of a mass flow controller
293
Experimental and numerical analysis of high pressure diesel spray–wall interaction
294
Experimental and numerical analysis of high resistive coated conductor for conceptual design of fault current limiter Original Research Article
295
Experimental and numerical analysis of Hydrodynamic Characteristics of a surface piercing propeller mounted on high-speed craft
296
Experimental and numerical analysis of in-plane and out-of-plane crack tip constraint characterization by secondary fracture parameters
297
Experimental and numerical analysis of large ferrocement water tanks
298
Experimental and numerical analysis of local and global plastic behaviour in fretting wear
299
Experimental and Numerical Analysis of Local Lateral Compression Process of Metal Tubes between Cylindrical Shaped Dies
300
Experimental and numerical analysis of localization during sequential test for an IF–Ti steel Original Research Article
301
Experimental and numerical analysis of metal injection molded products
302
Experimental and numerical analysis of mode II fracture between propellant and insulation
303
Experimental and numerical analysis of multilayered steel sheets upon bending
304
Experimental and numerical analysis of natural convection for Al–5.5% Cu alloy
305
Experimental and numerical analysis of natural ventilation with combined light/vent pipes
306
Experimental and numerical analysis of nitric oxide effect on the ignition of iso-octane in a single cylinder HCCI engine
307
Experimental and Numerical Analysis of Nonlinear Phenomena in a Stochastically Excited Beam System with Impact
308
Experimental and numerical analysis of novel 9-DOF robotic manipulator for computed tomography guided medical procedure
309
Experimental and Numerical Analysis of Opaque Turbulent Buoyant Jet
310
Experimental and numerical analysis of out-of-plane formability test
311
Experimental and Numerical Analysis of Permeability in Porous Media
312
Experimental and numerical analysis of pollutant dispersion from a chimney
313
Experimental and numerical analysis of quasi-static bubble size and shape characteristics at detachment
314
Experimental and numerical analysis of seat belt bunching phenomenon
315
Experimental and numerical analysis of self-excited friction oscillator
316
Experimental and Numerical Analysis of Short-Pulse Laser Interaction with Tissue Phantoms Containing Inhomogeneities
317
Experimental and numerical analysis of single-lap joints for the automotive industry
318
Experimental and numerical analysis of sodium-carbonate salt gradient solar-pond performance under simulated solar-radiation
319
Experimental and numerical analysis of soybean meal drying in fluidized bed
320
Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures conditions
321
Experimental and numerical analysis of steam jet pump
322
Experimental and numerical analysis of stomatal absorption of sulphur dioxide and transpiration by pine needles
323
Experimental and numerical analysis of stratified turbulent V-shaped flames
324
Experimental and numerical analysis of sub-surface cracks in railway wheels
325
Experimental and numerical analysis of supersonic air ejector
326
Experimental and numerical analysis of the air inflow technique for dust removal from the vacuum vessel of a tokamak machine
327
Experimental and Numerical Analysis of the Co-Digestion Process of Municipal Sludge with Fruit and Vegetable Waste
328
Experimental and numerical analysis of the combustor for a cogeneration system based on the aluminum/water reaction
329
Experimental and numerical analysis of the cup drawing test for orthotropic metal sheets
330
Experimental and numerical analysis of the deformation of ferrite segments during sintering
331
Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation Review Article
332
Experimental and Numerical Analysis of the Heating Performance of a New Skirting Board Radiator with Forced Air Circulation
333
Experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles
334
Experimental and numerical analysis of the scouring effects of flushing waves on sediment deposits
335
Experimental and numerical analysis of the temperature transition of a suspended freezing water droplet
336
Experimental and numerical analysis of the tensile test using sheet specimens
337
Experimental and numerical analysis of thermal shock damages to alumina based ceramic disk samples
338
Experimental and numerical analysis of thermally dissipating equipment in an aircraft confined compartment
339
Experimental and numerical analysis of thermo-magnetic convection in a vertical annular enclosure
340
Experimental and numerical analysis of three-dimensional semi-rigid steel joints under non-proportional loading
341
Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
342
Experimental and Numerical Analysis of Titanium/HA FGM for Dental Implantation
343
Experimental and numerical analysis of toughness anisotropy in AA2139 Al-alloy sheet Original Research Article
344
Experimental and numerical analysis of transverse stitched T-joints in bending
345
Experimental and numerical analysis of tube-core claddings under blast loads
346
Experimental and numerical analysis of web stiffened cold-formed steel channel column with various types of edge stiffener
347
Experimental and Numerical Analysis of Woven Bamboo and Jute Fiber Reinforced in Epoxy Composites
348
Experimental and numerical analysis on effect of fibre aspect ratio on mechanical properties of SRFC
349
Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel Original Research Article
350
Experimental and numerical analysis on load capacity and failure process of T-joint: Effect produced by the bond-line length
351
Experimental and numerical analysis on normalization of picture frame tests for composite materials
352
Experimental and numerical analysis on pebble beds used in an ITER Test Module Blanket
353
Experimental and numerical analysis on the structural behaviour of cold-formed steel beams
354
Experimental and numerical appraisal of self-piercing riveting
355
Experimental and Numerical Approach to Enlargement of Performance of Primary Settling Tanks
356
Experimental and Numerical Approach to Enlargement of Performance of Primary Settling Tanks
357
Experimental and numerical approaches for estimating ballistic limit velocities of woven composite beams
358
Experimental and numerical approaches of aerosol removal in spray conditions for containment application Original Research Article
359
Experimental and numerical assessment of EPS wind action on long span transmission line conductors
360
EXPERIMENTAL AND NUMERICAL ASSESSMENT OF FRP STIRRUPS DISTANCE ON CYCLIC BEHAVIOR OF RC JOINTS
361
Experimental and numerical assessment of gate-lag phenomena in AlGaAs-GaAs heterostructure field-effect transistors (FETs)
362
Experimental and numerical assessment of Tailor-Welded Blanks formability
363
Experimental and numerical assessment of the effectiveness of FRP-based strengthening configurations for dapped-end RC beams
364
Experimental and numerical assessment of the lateral resistance of ballasted railway track equipped with mid-winged sleeper
365
Experimental and numerical assessment of thermal fatigue in 316 austenitic steel pipes
366
Experimental and Numerical Behavior of Shallow Foundations on Sand Reinforced with Geogrid and Grid Anchor Under Cyclic Loading
367
Experimental and numerical biomechanical analysis of vascular stent
368
Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact
369
Experimental and numerical characterisation of heat flow during flame cutting of thick steel plates
370
Experimental and numerical characterisation of in-plane deformation in two-phase materials
371
Experimental and numerical characterisation of mixing in a steady spatially chaotic flow by means of residence time distribution measurements
372
Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue
373
Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue
374
Experimental and numerical characterization of a direct solenoid actuation injector for Diesel engine applications
375
Experimental and numerical characterization of a membrane material for orthotropic steel deck bridges: Part 1: Experimental work and data interpretation
376
Experimental and numerical characterization of a membrane material for orthotropic steel deck bridges: Part 2
377
Experimental and numerical characterization of an electrode-matrix cell for electrochemical measurements
378
Experimental and numerical characterization of damage evolution in steels
379
Experimental and numerical characterization of Friction Stir Spot Welded joints
380
Experimental and numerical characterization of honeycomb sandwich composite panels
381
Experimental and numerical characterization of the neutron field produced in the n@BTF Frascati photo-neutron source
382
Experimental and numerical characterization of the neutron field produced in the n@BTF Frascati photo-neutron source
383
Experimental and numerical characterization of the structural dynamics of flapping beams
384
Experimental and numerical characterization of the transverse dispersion at the exit of a short ceramic foam inside a pipe
385
Experimental and numerical characterization of thermal bridges in prefabricated building walls
386
Experimental and numerical comparison of cold expansion and interference fit methods in improving fatigue life of holed plate in double shear lap joints
387
Experimental and Numerical comparison of extractive and in situ laser measurements of non-equilibrium carbon monoxide in lean-premixed natural gas combustion,
388
Experimental and numerical comparison of ow and scour patterns around a single and triple bridge piers located at a 180-degree sharp bend
389
Experimental and numerical comparison of structured packings with a randomly packed bed reactor for Fischer–Tropsch synthesis
390
Experimental and numerical conversion of liquid heptane to syngas through combustion in porous media
391
Experimental and numerical crack analysis of mixed-mode failure in concrete by acoustic emission and boundary element method
392
Experimental and numerical crashworthiness investigation of empty and foam-filled end-capped conical tubes
393
Experimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
394
Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core
395
Experimental and numerical determination of heat transfer coefficient between oil and outer surface of monometallic tubes finned on both sides with twisted internal longitudinal fins
396
Experimental and numerical determination of texture evolution during deep drawing tests
397
Experimental and numerical determination of the chloride penetration in cracked concrete
398
Experimental and numerical determination of the dynamic properties of the reactor building of Atucha II NPP Original Research Article
399
Experimental and numerical determination of the intragranular work hardening in a cold rolled multicrystal
400
Experimental and numerical determination of the intragranular work hardening in a cold rolled multicrystal
401
Experimental and numerical determination of the total solar energy transmittance of glazing with venetian blind shading
402
Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape-memory alloys
403
Experimental and numerical developing of reduced length buckling-restrained braces
404
Experimental and numerical dynamic analysis of a live tree stem impacted by a Charpy pendulum
405
Experimental and Numerical Dynamic Investigation of a Swirling Jet: Application to Improve the Efficiency of Air Diffusion in an Occupied Zone
406
Experimental and Numerical Evaluation of Analytical Volume Balance Model for Soil Water Dynamics under Drip Irrigation
407
Experimental and numerical evaluation of busbar trunking impedance
408
Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining
409
Experimental and numerical evaluation of contact pressure in pneumatic seals
410
Experimental and numerical evaluation of debris transport augmentation by turbulence during the recirculation-cooling phase of a LOCA
411
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys
412
Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets
413
Experimental and numerical evaluation of IR thermography method for Final Acceptance Tests of the ITER divertor dome
414
Experimental and numerical evaluation of metallic compounds for suppressing cup-burner flames
415
Experimental and Numerical Evaluation of Progressive Collapse Behavior in Scaled RC Beam-Column Subassemblage
416
Experimental and numerical evaluation of sandwich composite structures
417
Experimental and Numerical Evaluation of the Effect of Implementing Wall Posts on Seismic Behavior of Short-Period Structures
418
Experimental and numerical evaluation of the flexural properties of stitched foam core sandwich structure
419
Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels
420
Experimental and numerical evaluation of the mechanical properties of compacted wear debris layers formed between composite and steel surfaces in sliding contact
421
Experimental and numerical evaluation of the unsteady cooling of ball bearings in atmospheric air: dual influence of nonlinear natural convection and surface radiation
422
Experimental and numerical evaluation of wavelet based damage detection methodologies
423
Experimental and numerical evidence for the existence of wide and deep phononic gaps induced by inertial amplification in two-dimensional solid structures
424
Experimental and numerical examination of confined laminar opposed jets part I. Momentum imbalance
425
Experimental and numerical examination of confined laminar opposed jets part II. Momentum balancing
426
Experimental and numerical failure analysis of carbon/epoxy laminated composite joints under different conditions
427
Experimental and numerical failure analysis of pinned-joints in composite materials
428
Experimental and numerical failure criterion for formability prediction in sheet metal forming
429
Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution
430
EXPERIMENTAL AND NUMERICAL FORM-FINDING OF MEMBRANE STRUCTURES
431
Experimental and Numerical Free Vibration Analysis of Hybrid Stiffened Fiber Metal Laminated Circular Cylindrical Shell
432
Experimental and numerical heat transfer analysis of a V-cavity absorber for linear parabolic trough solar collector
433
Experimental and numerical heat transfer in a helically baffled heat exchanger combined with one three-dimensional finned tube
434
Experimental and numerical identification of cortical bone permeability
435
Experimental and numerical investigation for compression response of CFRP strengthened shape modified wall-like RC column
436
Experimental and numerical investigation for ductile fracture of Al-alloy 5052 using modified Rousselier model
437
Experimental and Numerical Investigation for Predicting the Performance of Voluteless Centrifugal Fan Rotors
438
Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars
439
Experimental and numerical investigation in flow configurations related to the vacuum systems of fusion reactors
440
Experimental and numerical investigation into the effect of carbon nanotube buckling on the reinforcement of CNT/Cu composites
441
Experimental and numerical investigation into useful wrinkling during aluminium alloy Tinternal high-pressure forming
442
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF 2-D BACKWARD-FACING STEP FLOW
443
Experimental and Numerical Investigation of a 60cm Diameter Bladeless Fan
444
Experimental and Numerical Investigation of a 60cm Diameter Bladeless Fan
445
Experimental and numerical investigation of a capacitively coupled low-radio frequency nitrogen plasma
446
Experimental and numerical investigation of a cracked transversely graded plate subjected to in plane bending
447
Experimental and numerical investigation of a dew-point cooling system for thermal comfort in buildings
448
Experimental and numerical investigation of a free rising droplet
449
Experimental and numerical investigation of a full-scale helium-cooled divertor finger mock-up
450
Experimental and numerical investigation of a fully confined impingement round jet
451
Experimental and numerical investigation of a hybrid PCM–air heat sink
452
Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics
453
Experimental and numerical investigation of a micro-CHP flameless unit
454
Experimental and numerical investigation of a multi-pass branching microchannel heat sink
455
Experimental and numerical investigation of a new method for protecting bends from erosion in gas-particle flows
456
Experimental and numerical investigation of a phase change material: Thermal-energy storage and release
457
Experimental and numerical investigation of a propane-fueled, catalytic mesoscale combustor
458
Experimental and numerical investigation of air entrainment into an infrared suppression device
459
Experimental and Numerical Investigation of Air Flow Motion in Cylinder of Heavy Duty Diesel Engines
460
Experimental and Numerical Investigation of Air Temperature Distribution inside a Car under Solar Load Condition
461
Experimental and numerical investigation of airflow and contaminant transport in an airliner cabin mockup
462
Experimental and numerical investigation of Al properties fabricated by CGP process
463
Experimental and numerical investigation of an 8-cm valveless pulsejet
464
Experimental and numerical investigation of an air pocket immersed and immobilized in a horizontal water duct flow
465
Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel Original Research Article
466
Experimental and Numerical Investigation of Bottom Intake Structure for Desalination Plants
467
Experimental and numerical investigation of bottom outlet hydraulic model
468
Experimental and numerical investigation of circularly lobed nozzle with/without central plug
469
Experimental and numerical investigation of clearance gap effects on laminar mixed convection heat transfer from fin array in a horizontal channel-A conjugate analysis
470
Experimental and Numerical Investigation of Coating Effect on Pump Impeller and Volute
471
Experimental and numerical investigation of cold-formed lean duplex stainless steel flexural members
472
Experimental and numerical investigation of combined isotropic-kinematic hardening behavior of sheet metals
473
EXPERIMENTAL and NUMERICAL INVESTIGATION OF CONTAMINANT CONTROL IN INTENSIVE CARE UNIT: A CASE STUDY OF RAIPUR, INDIA
474
Experimental and numerical investigation of convection heat transfer in a rectangular channel with angled ribs
475
Experimental and numerical investigation of convection heat transfer in channels with different types of ribs
476
Experimental and numerical investigation of convection heat transfer in transpiration cooling
477
Experimental and numerical investigation of convection heat transfer of CO2 at supercritical pressures in a vertical mini-tube
478
Experimental and numerical investigation of cooling effectiveness and heat transfer coefficient for straight and curved holes
479
Experimental and numerical investigation of crack closure measurements with electrical potential drop technique
480
Experimental and numerical investigation of DDT in hydrogen–Air behind a single obstacle
481
Experimental and numerical investigation of deformation and fracture of semicrystalline polymers under varying strain rates and triaxial states of stress
482
Experimental and Numerical Investigation of Degree of Freedom Effects on Hydrodynamic Performance of Floating Breakwaters Under Regular Waves
483
Experimental and numerical investigation of downward gas-dispersed turbulent pipe flow
484
Experimental and Numerical Investigation of Drag Force at High Speed Diver Motion in Different Depths from Free Surface
485
Experimental and numerical investigation of drag force over tubular frustum
486
Experimental and numerical investigation of droplet evaporation under diesel engine conditions
487
Experimental and numerical investigation of ductile damage effect on load bearing capacity of a dented API XB pipe subjected to internal pressure
488
Experimental and numerical investigation of ductile-to-brittle transition in a pressure vessel steel
489
Experimental and Numerical Investigation of Fatigue Behavior of Chopped GFRP Composite Rod under Rotating Bending Load
490
Experimental and numerical investigation of fatigue of thin tensile specimen
491
Experimental and Numerical Investigation of Fire Dynamics Inside the Closed Enclosure
492
Experimental and numerical investigation of flow behaviors of some selected food supplements in modeled intestine
493
Experimental and Numerical Investigation of Flow in Hydraulic Elbows
494
Experimental and Numerical Investigation of Flow in Hydraulic Elbows
495
Experimental and numerical investigation of flow patterns in symmetrical spurs
496
Experimental and Numerical Investigation of Flows in Complex Shaped Axisymmetric Channels with Mass Injection
497
Experimental and Numerical Investigation of Fluid Flow in Hydraulic Filters
498
Experimental and numerical investigation of forced convection heat transfer of air in non-sintered porous media
499
Experimental and numerical investigation of fracture in a cast aluminium alloy
500
Experimental and numerical investigation of fracture mechanics of bitumen beams
501
Experimental and numerical investigation of free-bulge formation during hydroforming of aluminum extrusions
502
Experimental and Numerical Investigation of Friction Coefficient and Wear Volume in the Mixed-Film Lubrication Regime with ZnO Nano-Particle
503
Experimental and numerical investigation of friction-induced vibration of a beam-on-beam in contact with friction
504
Experimental and numerical investigation of gaseous fuel combustion in swirl chamber
505
Experimental and Numerical Investigation of Geometric SCFs in Internally Ring-Stiffened Tubular KT-Joints of Offshore Structures
506
Experimental and numerical investigation of grid sheet bending behavior in four-roll bending
507
Experimental and Numerical Investigation of Groove Pressed UFG Pure Aluminum
508
Experimental and Numerical Investigation of Heat and Mass Transfer Processes for Determining the Optimal Design of an Accumulator with Phase Transformations
509
Experimental and Numerical Investigation Of Heat Transfer Enhancement By Using Different Geometry Coiled Tubes
510
Experimental and numerical investigation of heat transfer from a heated horizontal cylinder rotating in still air around its axis
511
Experimental and numerical investigation of high temperature imbibition into preferential oil-wet chalk
512
Experimental and numerical investigation of humidification/dehumidification solar water desalination systems Original Research Article
513
Experimental and numerical investigation of hydrogen gas auto-ignition
514
Experimental and numerical investigation of idealized consolidation: Part 1: Static compaction Original Research Article
515
Experimental and numerical investigation of idealized consolidation: Part II: Cyclic compaction Original Research Article
516
Experimental and Numerical Investigation of Implementing a Novel Vortex Generator: A Perforated Delta Wing Vortex Generator (PDWVG) on the Performance of Solar Air Collector
517
Experimental and Numerical Investigation of Injection Molding Main Parameters’ Effects on Shrinkage and Warpage of a Thin Sheet Made of HDPE
518
Experimental and numerical investigation of jet impingement cooling of a circular cylinder
519
Experimental and numerical investigation of laminated steel sheet in V-bending process considering nonlinear visco-elasticity of polymer layer
520
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF LASER FORMING OF A DOUBLY CURVED SADDLE SHAPE WITH SPIRAL IRRADIATING SCHEME
521
Experimental and numerical investigation of liquid channel flows with dispersed gas and solid particles
522
Experimental and Numerical Investigation of Local Scouring around Bridge Piers in Different Geometric Shapes at a 90° Convergent meander
523
Experimental and numerical investigation of localized fire test for high-pressure hydrogen storage tanks
524
Experimental and numerical investigation of localized thinning in hydroforming of micro-tubes
525
Experimental and numerical investigation of low-pressure laminar premixed synthetic natural gas/O2/N2 and natural gas/H2/O2/N2 flames
526
Experimental and numerical investigation of masonry under three-point bending (in-plane)
527
Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351
528
Experimental and Numerical Investigation of Mechanical and Thermal Residual Strains in Adhesively Bonded Joints
529
Experimental and Numerical Investigation of Mechanical Properties in the Ultrasonic Assisted constraint groove pressing process of copper sheets
530
Experimental and numerical investigation of melting of NePCM inside an annular container under a constant heat flux including the effect of eccentricity
531
Experimental and numerical investigation of melting of phase change material/nanoparticle suspensions in a square container subjected to a constant heat flux
532
Experimental and numerical investigation of Mg alloy sheet formability
533
Experimental and numerical investigation of micro-environmental conditions in public transportation buses
534
Experimental and numerical investigation of multiple rectangular jets
535
Experimental and numerical investigation of nanofluid forced convection inside a wide microchannel heat sink
536
Experimental and numerical investigation of nanofluid heat transfer in helically coiled tubes at constant wall temperature using dispersion model
537
Experimental and numerical investigation of natural convection effects on confined impinging jet heat transfer
538
Experimental and numerical investigation of nonlinear thermocapillary oscillations in an annular geometry
539
Experimental and Numerical Investigation of Octagonal Partially Encased Composite Columns Subject to Axial and Torsion Moment Loading
540
Experimental and Numerical Investigation of Old Masonry Wall Using a Macro-Modeling Approach
541
Experimental and numerical investigation of one-dimensional waterflood in porous reservoir
542
Experimental and numerical investigation of particle distribution behaviors in a rolling circulating fluidized bed
543
Experimental and numerical investigation of particle erosion caused by pulverised fuel in channels and pipework of coal-fired power plant
544
Experimental and numerical investigation of polymer flooding in fractured heavy oil five-spot systems
545
Experimental and numerical investigation of premixed acetylene flame
546
Experimental and numerical investigation of premixed flame propagation with distorted tulip shape in a closed duct
547
Experimental and numerical investigation of pulse-shaped split Hopkinson pressure bar test
548
Experimental and numerical investigation of radial ow compressor volute shape effects in characteristics and circumferential pressure non-uniformity
549
Experimental and Numerical Investigation of Reinforced Sand Slope Using Geogird Encased Stone Column
550
Experimental and Numerical Investigation of Reinforcement Sheet Effect on the Bending Strength of Corrugated Composite Panels
551
Experimental and numerical investigation of residual stresses around cold extrusion hole of ultrahigh strength steel
552
Experimental and numerical investigation of restoration behavior of sheet metals subjected to bulging deformation
553
Experimental and Numerical Investigation of Reverse Fault Rupture Interaction with Steel Frame Structures
554
Experimental and Numerical Investigation of Rock Dynamic Fracture
555
Experimental and numerical investigation of self-excited combustion oscillations in a scaled gas turbine combustor
556
Experimental and numerical investigation of self-sustained oscillations in channels with periodic structures
557
Experimental and Numerical Investigation of Semi-Transverse Ventilation System During the Fire Test
558
Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint
559
Experimental and numerical investigation of single-phase heat transfer using a hybrid jet-impingement/micro-channel cooling scheme
560
Experimental and numerical investigation of size effects in FRP-wrapped concrete columns
561
Experimental and numerical investigation of soil-atmosphere interaction
562
Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed
563
Experimental and numerical investigation of solid particles thermal energy storage unit
564
Experimental and numerical investigation of springback effect for advanced high strength dual phase steel
565
Experimental and Numerical Investigation of Stall Mechanism in Centrifugal Pump Impeller
566
Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes
567
Experimental and Numerical Investigation of Steel Frame with Shear Panel at Mid-Span
568
Experimental and numerical investigation of strip rolling from dual phase steel
569
Experimental and numerical investigation of tar destruction under partial oxidation environment
570
Experimental and numerical investigation of the acoustic response of multi-slit Bunsen burners
571
Experimental and numerical investigation of the airflow around a raised permeable panel
572
Experimental and numerical investigation of the aperture size effect on the efficient solar energy harvesting for solar thermochemical applications
573
Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system
574
Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator
575
Experimental and Numerical Investigation of the Arms Displacement in a New Electrothermal MEMS Actuator
576
Experimental and numerical investigation of the behaviour of articular cartilage under shear loading—Interstitial fluid pressurisation and lubrication mechanisms
577
Experimental and numerical investigation of the catalytic ignition of mixtures of hydrogen and oxygen on platinum
578
Experimental and Numerical Investigation of the Control of the Flow Structure on Surface Modified Airfoils
579
Experimental and numerical investigation of the crushing response of an open section composite energy absorbing element
580
Experimental and numerical investigation of the effect of a speed bump on car noise emission level
581
Experimental and numerical investigation of the effect of buoyancy force on solid flow
582
Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates
583
Experimental and Numerical Investigation of the Effect of Embedding Steel Wires inside the Foam of GFRP/Foam Sandwich Panel under Three-Point Bending Load
584
Experimental and numerical investigation of the effect of H2 enrichment on laminar methane–air flame thickness
585
Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance
586
Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling
587
Experimental and numerical investigation of the effects of incorporation of one and two steps to a mono-hull planing vessel on its performance in calm water
588
Experimental and Numerical Investigation of the Effects of Passive Vortex Generators on Aludra UAV Performance
589
Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel
590
Experimental and Numerical Investigation of the Efficiency and Pressure drop of an Inertial Impactor with Variable Area
591
Experimental and numerical investigation of the flow field through a heat exchanger for aero-engine applications
592
Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process
593
Experimental and Numerical Investigation of the Fracture of Obstacles by Groups of High-Speed Bodies
594
Experimental and numerical investigation of the hydroerosive grinding
595
Experimental and Numerical Investigation of the Impact of a Blunt Projectile with a Perforated Plate
596
Experimental and Numerical Investigation of the Impact of Basalt Fibers and Tie Spacing on Short Concrete Column Behavior
597
Experimental and numerical investigation of the influence of imperfect bonding on the strength of NCF double-lap shear joints
598
Experimental and Numerical Investigation of the Influence of Leading Edge Tubercles on S823 Airfoil Behavior
599
Experimental and numerical investigation of the influence of the two-phase ejector geometry on the performance of the R744 heat pump
600
Experimental and numerical investigation of the mixed-mode delamination in Arcan laminated specimens
601
Experimental and numerical investigation of the performance of a 240 kW centrifugal compressor with different diffusers
602
Experimental and Numerical Investigation of the Performance of Automotive Adhesively Bonded Crash Box Beams Under Transverse Loading
603
Experimental and numerical investigation of the plunge stage in friction stir welding
604
Experimental and numerical investigation of the position-dependent growth of carbon nanotube–alumina microparticle hybrid structures in a horizontal CVD reactor Original Research Article
605
Experimental and numerical investigation of the power-on effect for a propeller-driven UAV
606
Experimental and numerical investigation of the seismic performance of hollow rectangular bridge piers constructed with and without steel fiber reinforced concrete
607
Experimental and numerical investigation of the stability of overhanging riverbanks
608
Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints
609
Experimental and numerical investigation of the steady periodic solid–liquid phase-change heat transfer
610
Experimental and numerical investigation of the tension and compression strength of un-notched and notched quasi-isotropic laminates
611
Experimental and numerical investigation of the thermal effects during hydrogen charging in packed bed storage tank
612
Experimental and numerical investigation of the thermal performance of a protected vacuum-insulation system applied to a concrete wall
613
Experimental and numerical investigation of the tracer gas methodology in the case of a naturally cross-ventilated building
614
Experimental and numerical investigation of the unsteady flow field and tone generation in an isolated centrifugal fan impeller
615
Experimental and numerical investigation of the weld repair of superplastic forming dies
616
Experimental and numerical investigation of thermal -hydraulic performance in wavy fin-and-flat tube heat exchangers
617
Experimental and numerical investigation of thermal plume in urban surface layer
618
Experimental and numerical investigation of thickness effect on ductile fracture toughness of steel alloy sheets
619
Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure
620
Experimental and Numerical Investigation of Tip Leakage Vortex Cavitation in Water-jet Pump
621
Experimental and numerical investigation of transpiration cooling for sintered porous flat plates
622
Experimental and numerical investigation of turbulent convective heat transfer deterioration of supercritical water in vertical tube
623
Experimental and numerical investigation of turbulent cross-flow in a staggered tube bundle
624
Experimental and numerical investigation of turbulent heat transfer in a channel with periodically arranged rib roughness elements
625
Experimental and numerical investigation of turbulent heat transfer in a channel with periodically arranged rib roughness elements Original Research Article
626
Experimental and numerical investigation of turbulent natural convection in a large air-filled cavity
627
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran
628
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran
629
Experimental and Numerical Investigation of Two Fixed-End RC Beams Strengthened With CFRP Bars in NSM Method
630
Experimental and Numerical Investigation of Two-Dimensional Parallel Jets
631
Experimental and numerical investigation of two-phase pressure drop in vertical cross-flow over a horizontal tube bundle
632
Experimental and Numerical Investigation of Unsteady Flow around Cylinder with Four Plates Perpendicular to it with Rotational Degree of Freedom
633
Experimental and numerical investigation of unsteady flow around cylinder with four plates perpendicular to it with the rotational degree of freedom
634
Experimental and numerical investigation of urban street canyons to evaluate the impact of green roof inside and outside buildings
635
Experimental and Numerical Investigation of Vortex-Induced Vibrations and Pressure drop in Square Pipe with Obstacle
636
Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy
637
Experimental and numerical investigation on a multi-layer protective structure under the synergistic effect of blast and fragment loadings
638
Experimental and numerical investigation on carbonitrided steel characterization with spherical indentation
639
Experimental and numerical investigation on circular footing subjected to incremental cyclic loads
640
Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body
641
Experimental and numerical investigation on crush resistance of polygonal columns and angle elements
642
Experimental and numerical investigation on development of new incremental forming process
643
Experimental and numerical investigation on diluted DME flames: Thermal and chemical kinetic effects on laminar flame speeds
644
Experimental and numerical investigation on ductile-brittle fracture transition in a magnesium alloy
645
Experimental and numerical investigation on flexural bond strength behavior of corroded NBS RC beam
646
Experimental and numerical investigation on frame structure composed of steel reinforced concrete beam and angle-steel concrete column under dynamic loading
647
Experimental and Numerical Investigation on Gas Holdup and Flooding in an Aerated Stirred Tank with Rushton Impeller
648
Experimental and Numerical Investigation on Geometric Parameters of Aluminum Patches for Repairing Cracked Parts by Diffusion Method
649
Experimental and Numerical Investigation on Laminar Pipe Flow of Magneto-Rheological Fluids under Applied External Magnetic Field
650
EXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
651
Experimental and numerical investigation on passive and active μDMFC
652
Experimental and numerical investigation on performance of a porous medium burner with reciprocating flow
653
Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete
654
Experimental and numerical investigation on progressive collapse resistance of reinforced concrete beam column sub-assemblages
655
Experimental and Numerical Investigation on Shear Retrofitting of RC Beams by Prefabricated UHPFRC Sheets
656
Experimental and numerical investigation on solar concentrating characteristics of a sixteen-dish concentrator
657
Experimental and numerical investigation on structural effects of laser pulses for modal parameter measurement
658
Experimental and numerical investigation on temperature characteristics of high-speed railwayʹs embankment in seasonal frozen regions
659
Experimental and numerical investigation on temperature characteristics of in-cuts roadbed in Qinghai–Tibetan railway
660
Experimental and numerical investigation on the deformation and failure behavior in the Taylor test
661
Experimental and numerical investigation on the dynamic tensile behavior of ultra-high performance cement based composites
662
Experimental and numerical investigation on the dynamic tensile strength of concrete
663
Experimental and Numerical Investigation on the Flexural Behavior of Composite-Reinforced Top-Hat Shape Beam
664
Experimental and numerical investigation on the flow field within a compact inlet duct
665
Experimental and Numerical Investigation on the Heat Treatment Effects of AA6063 Aluminum Alloy Tubes During Rotary Draw Bending
666
Experimental and numerical investigation on the influence of particle shape and shape approximation on hopper discharge using the discrete element method
667
Experimental and numerical investigation on the jet characteristics of spark ignition direct injection gaseous injector
668
Experimental and numerical investigation on the macroscopic mechanical behavior of shape memory alloy hybrid composite with weak interface
669
Experimental and numerical investigation on the performance of amorphous silicon photovoltaics window in East China
670
Experimental and numerical investigation on the reliability of leadfree solders
671
Experimental and numerical investigation on web-post specimen from cellular beams with sinusoidal openings
672
Experimental and numerical investigation the effect of pier position on local scouring around bridge pier at a 90° convergent bend
673
Experimental and numerical investigations about textile-reinforced concrete and hybrid solutions for repairing and/or strengthening reinforced concrete beams
674
Experimental and numerical investigations about the combined effect of interference fit and bolt clamping on the fatigue behavior of Al 2024-T3 double shear lap joints
675
Experimental and numerical investigations into collapse behaviour of thin spherical shells under drop hammer impact
676
Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints
677
Experimental and numerical investigations into the effect of heterogeneities on the recovery of heavy oil by VAPour EXtraction (VAPEX)
678
Experimental and numerical investigations of a dynamic cyclone with a rotary impeller
679
Experimental and numerical investigations of a turbulent round jet into a cavity
680
Experimental and numerical investigations of an atmospheric diffusion oxy-combustion flame in a gas turbine model combustor
681
Experimental and numerical investigations of an orifice type cryogenic pulse tube refrigerator
682
Experimental and numerical investigations of bond between CFRP and concrete
683
Experimental and numerical investigations of buckle interaction in subsea pipelines
684
Experimental and numerical investigations of coke descending behavior in a coke dry quenching cooling shaf
685
Experimental and Numerical Investigations of Composite Concrete–Steel Plate Shear Walls Subjected to Axial Load
686
Experimental and numerical investigations of ductile damage in aluminium alloys
687
Experimental and numerical investigations of ductile damage in aluminium alloys
688
Experimental and numerical investigations of flow fields behind a small wind turbine with a flanged diffuser
689
Experimental and numerical investigations of gouge formation related to blast furnace burden distribution
690
Experimental and Numerical Investigations of Heat and Mass Transport in Laser-Induced Modification of Ceramic Surfaces
691
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module – Part 1: Presentation of test section and 3D CFD model
692
Experimental and numerical investigations of heat transfer in the first wall of Helium-Cooled-Pebble-Bed Test Blanket Module—Part 2: Presentation of results
693
Experimental and numerical investigations of hydrogen–air premixed combustion in a converging–diverging micro tube
694
Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup
695
Experimental and numerical investigations of laminated glass subjected to blast loading
696
Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite
697
Experimental and numerical investigations of low velocity impact on sandwich panels
698
Experimental and numerical investigations of low-temperature superfluid turbulence
699
Experimental and numerical investigations of mechanisms in fluidic spray control
700
Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint
701
Experimental and numerical investigations of mixing in raceway ponds for algae cultivation
702
Experimental and numerical investigations of moisture permeation through membranes
703
Experimental and numerical investigations of natural circulation phenomena in passive safety systems for decay heat removal in large pools Original Research Article
704
Experimental and numerical investigations of near-crack-tip deformation in a solder alloy Original Research Article
705
Experimental and numerical investigations of Otala lacteaʹs shell–I. Quasi-static analysis
706
Experimental and numerical investigations of perforated CFR woven fabric laminates
707
Experimental and numerical investigations of powder transfer
708
Experimental and numerical investigations of radiation characteristics of Russian portable/compact pulsed neutron generators: ING-031, ING-07, ING-06 and ING-10-20-120
709
Experimental and numerical investigations of radiation characteristics of Russian portable/compact pulsed neutron generators: ING-031, ING-07, ING-06 and ING-10-20-120
710
Experimental and numerical investigations of residual strength after impact of sandwich panels
711
Experimental and numerical investigations of salt gradient solar pond under Jordanian climate conditions
712
Experimental and numerical investigations of shell-side thermo-hydraulic performances for shell-and-tube heat exchanger with trefoil-hole baffles
713
EXPERIMENTAL and NUMERICAL INVESTIGATIONS OF SOLAR FLUX DENSITY DISTRIBUTION OVER FLAT PLATE RECEIVER OF MODEL HELIOSTAT SYSTEM
714
Experimental and numerical investigations of stresses in a fully grouted rock bolts
715
Experimental and Numerical Investigations of the Characterisation of Reflected Overpressures around a Complex Structure
716
Experimental and numerical investigations of the deformation of soft materials under tangential loading
717
Experimental and Numerical Investigations of the Effect of Impact Angle and Impactor Geometry on the High-Velocity Impact Response of Aluminum Honeycomb Structures
718
Experimental and numerical investigations of the effects of PBI loading and operating temperature on a high-temperature PEMFC
719
Experimental and numerical investigations of the effects of the spatial distribution of α phase on fracture behavior in hypoeutectic Al–Si alloys Original Research Article
720
Experimental and numerical investigations of the flow around three different wall-mounted cylinder geometries of finite length
721
Experimental and numerical investigations of the plane strain compression of an oligocrystalline pure copper specimen
722
Experimental and numerical investigations of the torsional flutter oscillations of a 4:1 rectangular cylinder
723
Experimental and numerical investigations of the warm-prestressing (WPS) effect considering different load paths
724
Experimental and numerical investigations of the warm-prestressing (WPS) effect considering different load paths Original Research Article
725
Experimental and numerical investigations of three-dimensional turbulent flow of water surrounding a CANDU simulation fuel bundle structure inside a channel Original Research Article
726
Experimental and numerical investigations of two material states of the material 15 NiCuMoNb5 (WB 36)
727
Experimental and Numerical Investigations of Two-Phase Electrolysis Processes - Electrical Energy Conversion in Hydrogen Production
728
Experimental and numerical investigations of void damage in aluminum alloy welds under thermal cycling condition
729
Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on joints
730
Experimental and numerical investigations of yield surface, texture, and deformation mechanisms in AA5754 over low to high temperatures and strain rates
731
Experimental and numerical investigations on adhesively bonded hardwood joints
732
Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage
733
Experimental and numerical investigations on erosion damage in glass by impact of small-sized particles
734
Experimental and numerical investigations on fatigue damage propagation and life prediction of high-performance concrete containing reactive mineral admixtures
735
Experimental and Numerical Investigations on Feasibility and Validity of Prismatic Rock Specimen in SHPB
736
Experimental and numerical investigations on flexural and thermal properties of nanoclay–epoxy nanocomposites
737
Experimental and numerical investigations on properties and quality of parts produced by MIM
738
Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge
739
Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth
740
Experimental and numerical investigations on the pure material instability of an Oldroydʹs 3-constant model
741
Experimental and numerical investigations on water behaviour in a solar tunnel drier Original Research Article
742
Experimental and numerical investigations: Alleviating tensile residual stresses in flash-butt welds by localised rapid post-weld heat treatment
743
Experimental and numerical lifetime assessment of Al 2024 sheet
744
Experimental and numerical low-temperature oxidation study of ethanol and dimethyl ether
745
Experimental and numerical modal analyses of a historical masonry palace
746
Experimental and numerical model of wall like solar heat discharge passive system
747
Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress
748
Experimental and numerical modeling of equiaxed solidification in metallic alloys Original Research Article
749
Experimental and numerical modeling of sulfur plugging in carbonate reservoirs
750
Experimental and Numerical Modeling of the Effect of Groundwater Table Lowering on Bearing Capacity of Shallow Square Footings
751
Experimental and numerical modelling comparison of thermal performance of expanded polystyrene and corrugated plastic packaging for fresh fish
752
Experimental and numerical modelling of ductile crack propagation in large-scale shell structures
753
Experimental and numerical modelling of the three-dimensional incompressible flow behaviour in the near wake of circular cylinders
754
Experimental and numerical modelling of wheel–rail contact and wear
755
Experimental and numerical momentum flux evaluation of high pressure Diesel spray
756
Experimental and numerical optimisation of the sheet products geometry using response surface methodology
757
Experimental and numerical performance of a multi-effect condensation–evaporation solar water distillation system
758
Experimental and numerical plastic response and failure of pre-notched transversely impacted beams
759
Experimental and numerical plastic response and failure of pre-notched transversely impacted beams
760
Experimental and numerical POD study of the Coanda effect used to reduce self-sustained tones
761
Experimental and Numerical Pore Scale Study of Residual Gas Saturation in Water/Gas Imbibition Phenomena
762
Experimental and numerical prediction of springback and side wall curl in U-bendings of anisotropic sheet metals
763
Experimental and numerical research on condenser performance for R-22 and R-407C refrigerants
764
Experimental and numerical research on high pumping performance mechanism of lobed exhauster-ejector mixer
765
Experimental and Numerical Research on Steel Plate Shear Wall with Infill Plate Connected to Beam Only
766
Experimental and Numerical Research on the Formation Conditions and Entrainment Characteristics of Supercavity by Rear Jet Reflux
767
Experimental and numerical researches on collision of graphite bricks
768
Experimental and numerical residual stress analysis of layer coated composites
769
Experimental and numerical residual stress analysis of layer coated composites
770
Experimental and numerical results from hybrid retrofitted photovoltaic panels
771
Experimental and numerical results of a high frequency rotating active magnetic refrigerator
772
Experimental and numerical results on the plastic deformation in uniaxial compression experiments at high temperature on Er-doped GaSb samples
773
Experimental and numerical rolling contact fatigue study on the 32CrMoV13 steel
774
Experimental and numerical seismic investigations of the Three Gorges dam
775
Experimental and Numerical Simulation Investigation on Crushing Response of Foam-Filled Conical Tubes Stiffened with Annular Rings
776
Experimental and numerical simulation investigations on particle sampling for high-pressure natural gas
777
Experimental and numerical simulation of 3D fatigue crack for plate-to-plate welded joints
778
Experimental and numerical simulation of a stainless steel coating subjected to thermal fatigue
779
Experimental and numerical simulation of a stainless steel coating subjected to thermal fatigue
780
Experimental and numerical simulation of dissolution and precipitation: implications for fracture sealing at Yucca Mountain, Nevada
781
Experimental and numerical simulation of dough kneading in filled geometries Original Research Article
782
Experimental and numerical simulation of super-pressure balloon apex section: Mechanical behavior in realistic flight conditions Original Research Article
783
Experimental and Numerical Simulation of the Effect of Particles on Flow Structures in Secondary Sedimentation Tanks
784
Experimental and Numerical Simulation of the Effect of Particles on Flow Structures in Secondary Sedimentation Tanks
785
Experimental and numerical simulation of tube hydroforming (THF)
786
Experimental and numerical simulation studies of the fluidization characteristics of a separating gas–solid fluidized bed
787
Experimental and numerical simulation study on fracturing through interlayer to coal seam
788
Experimental and numerical simulations of idealized aircraft cabin flows
789
Experimental and Numerical Simulations of Jointed Rock Block Strength under Uniaxial Loading
790
Experimental and numerical simulations of turbulent ventilation in aircraft cabins
791
Experimental and numerical studies of a lean-burn internally-staged combustor
792
Experimental and numerical studies of a solar photocatalytic process in a dynamic mode applied to three catalyst media
793
Experimental and numerical studies of a triple flame
794
Experimental and numerical studies of AISI1020 steel in grind-hardening
795
Experimental and numerical studies of carbon black natural gas furnace
796
Experimental and numerical studies of creasing of paperboard
797
Experimental and numerical studies of double-nosed projectile impact on aluminum plates
798
Experimental and numerical studies of dynamic axial compression of thin walled spherical shells
799
Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams
800
Experimental and numerical studies of flows through and within high-rise building arrays and their link to ventilation strategy
801
Experimental and numerical studies of foam-filled sections
802
Experimental and numerical studies of header design and inlet/outlet configurations on flow mal-distribution in parallel micro-channels
803
Experimental and numerical studies of impact axial compression of thin-walled conical shells
804
Experimental and numerical studies of launder configurations in a two-phase flotation system
805
Experimental and numerical studies of liquid dispersal from a soft projectile impacting a wall
806
Experimental and numerical studies of liquid flow and heat transfer in microtubes
807
Experimental and numerical studies of local current mapping on a PEM fuel cell
808
Experimental and numerical studies of longitudinal crack control for pre-stressed concrete sleepers
809
EXPERIMENTAL AND NUMERICAL STUDIES OF MICROSPHERE OBLIQUE IMPACT WITH PLANAR SURFACES
810
EXPERIMENTAL AND NUMERICAL STUDIES OF MICROSPHERE OBLIQUE IMPACT WITH PLANAR SURFACES
811
Experimental and numerical studies of natural convection from horizontal concrete cylinder heated with a cylindrical heat source
812
Experimental and numerical studies of pressure drop in PbLi flows in a circular duct under non-uniform transverse magnetic field
813
Experimental and Numerical Studies of Secondary Injection in Nozzle Divergence for Thrust Augmentation
814
Experimental and numerical studies of selective fragmentation of mineral ores in electrical comminution
815
Experimental and numerical studies of separatrix splitting and magnetic footprints in DIII-D
816
Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams
817
Experimental and numerical studies of the accommodation of strain incompatibility on the grain scale
818
Experimental and numerical studies of the effect of particle size on the deformation behavior of the metal matrix composites
819
Experimental and numerical studies of the effect of whisker misalignment on the hot compressive deformation behavior of the metal matrix composites
820
Experimental and numerical studies of the effect of whisker misalignment on the hot compressive deformation behavior of the metal matrix composites
821
Experimental and numerical studies of the effect of whisker misalignment on the hot compressive deformation behavior of the metal matrix composites
822
Experimental and numerical studies of the effects of hydrogen addition on the structure of a laminar methane–nitrogen jet in hot coflow under MILD conditions
823
Experimental and numerical studies of the notch strengthening behaviour of semi-crystalline ultra-high molecular weight polyethylene
824
Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications
825
Experimental and Numerical Studies of Vitiated Air Effects on Hydrogen-fueled Supersonic Combustor Performance
826
Experimental and Numerical Studies of Vortex Induced Vibration on Cylinder
827
Experimental and numerical studies on actual flue gas condensation heat transfer in a left–right symmetric internally finned tube
828
Experimental and numerical studies on adhesively bonded CFRP laminates with closed debonds
829
Experimental and numerical studies on chemically reacting gas flow in the porous structure of a solid oxide fuel cells internal fuel reformer
830
Experimental and numerical studies on convective heat transfer from various urban canopy configurations
831
Experimental and numerical studies on dynamic compressive behavior of reactive powder concretes
832
Experimental and numerical studies on dynamic crack growth in layered slate rock under wedge impact loads: part II – non-plane strain problem
833
Experimental and numerical studies on dynamic crack growth in layered slate rock under wedge impact loads: part I—plane strain problem
834
Experimental and Numerical Studies on Improving Cyclone Efficiency by Rotation of Cyclone Body
835
Experimental and numerical studies on inclined flame evolution in packing bed
836
Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin
837
Experimental and numerical studies on mixing jets for sodium cooled fast reactors
838
Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins
839
Experimental and numerical studies on periodic convection flow and heat transfer in a lid-driven arc-shape cavity
840
Experimental and numerical studies on resistance of a catamaran vessel with non-parallel demihulls
841
Experimental and Numerical Studies on Rock Breaking with TBM Tools under High Stress Confinement
842
Experimental and numerical studies on size and constraining effects in lead-free solder joints
843
Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles
844
Experimental and numerical studies on the bonfire test of high-pressure hydrogen storage vessels
845
Experimental and numerical studies on the crush resistance of aluminum honeycombs with various cell configurations
846
Experimental and numerical studies on the determination of twist drill temperature in dry drilling: A new approach
847
Experimental and numerical studies on the discrete noise about the cross-flow fan with block-shifted impellers
848
Experimental and Numerical Studies on the Energy Absorption Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures
849
Experimental and numerical studies on the flame instabilities in porous media
850
Experimental and numerical studies on the forming behavior of tailor welded steel sheets in biaxial stretch forming
851
Experimental and numerical studies on the mechanical behaviour of Australian Strathbogie granite at high temperatures: An application to geothermal energy
852
EXPERIMENTAL AND NUMERICAL STUDIES ON THE NORMAL IMPACT OF MICROSPHERES WITH SURFACES
853
Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches
854
Experimental and numerical studies on the response of quadrangular stiffened plates. Part I: subjected to uniform blast load
855
Experimental and numerical studies on the response of quadrangular stiffened plates. Part II: localised blast loading
856
Experimental and numerical studies on the wake behavior of a horizontal axis wind turbine
857
Experimental and numerical study of a directly PV-assisted domestic hot water system
858
Experimental and numerical study of a duct/heat exchanger unit for building ventilation
859
Experimental and numerical study of a full scale ventilated enclosure: Comparison of four two equations closure turbulence models
860
Experimental and numerical study of a magnesium hydride tank
861
Experimental and numerical study of a mechanically ventilated enclosure with thermal effects
862
Experimental and numerical study of a new resonance hammer drilling model with drift
863
Experimental and numerical study of a proposed moment-resisting connection for precast concrete frames
864
Experimental and Numerical Study of a Submarine and Propeller Behaviors in Submergence and Surface Conditions
865
Experimental and Numerical Study of a Supercritical Wing Performance at Low Reynolds Numbers Equipped with Different Winglet Planforms
866
EXPERIMENTAL AND NUMERICAL STUDY OF A TURBULENT AXISYMMETRIC JET IMPINGING ONTO A CIRCULAR CYLINDER IN OFFSET AND NON-OFFSET SITUATIONS
867
Experimental and Numerical Study of a Turbulent Multiple Jets Issued from Lobed Diffusers
868
Experimental and numerical study of a vibro-impact phenomenon in a gearshift cable
869
Experimental and numerical study of a water spray in the wake of an axisymmetric bluff body
870
Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact
871
Experimental and numerical study of adsorptive chiller dynamics: Loose grains configuration
872
Experimental and numerical study of airflow pattern and particle dispersion in a vertical ventilation duct
873
Experimental and numerical study of an AlMgSc sheet formed by an incremental process
874
Experimental and numerical study of an asphalt storage tank in a reduced scale
875
Experimental and numerical study of annular PCM storage in the presence of natural convection
876
Experimental and numerical study of autoignition and pilot ignition of PMMA plates in a cone calorimeter
877
Experimental and numerical study of ball size effect on restitution coefficient in low velocity impacts
878
Experimental and numerical study of biomass flash pyrolysis in an entrained flow reactor
879
Experimental and numerical study of buckling response of composite shells compressed transversely between rigid platens
880
Experimental and numerical study of buoyancy-driven stairwell flow in a three storey building
881
Experimental and numerical study of circular, stainless thin tube energy absorber under axial impact by a control rod
882
Experimental and Numerical Study of CO2/CH4 Separation Using SAPO-34/PES Hollow Fiber Membrane
883
Experimental and numerical study of combusting solid propellant in an axisymmetric flow field with two moving boundaries
884
Experimental and numerical study of composite T-joints for marine application
885
Experimental and numerical study of compositional two-phase displacements in layered porous media
886
Experimental and numerical study of compression after impact of sandwich structures with metallic skins
887
Experimental and numerical study of constrained melting of n-octadecane with CuO nanoparticle dispersions in a horizontal cylindrical capsule subjected to a constant heat flux
888
Experimental and numerical study of convection heat transfer of CO2 at super-critical pressures during cooling in small vertical tube
889
Experimental and numerical study of convection heat transfer of CO2 at supercritical pressures in vertical porous tubes
890
Experimental and numerical study of convective heat transfer and fluid flow in twisted oval tubes
891
Experimental and numerical study of crack initiation and propagation under a 3D thermal fatigue loading in a welded structure
892
Experimental and numerical study of cracking behavior of openings in concrete dams
893
Experimental and numerical study of creep and creep rupture behavior of PA6
894
Experimental and Numerical Study of Damaged Cantilever
895
Experimental and numerical study of delamination detection in a WGF/epoxy composite plate using ultrasonic guided waves and signal processing tools
896
Experimental and numerical study of detailed reaction mechanism optimization for syngas (H2 + CO) production by non-catalytic partial oxidation of methane in a flow reactor
897
Experimental and numerical study of discharge process of metal–hydrogen tank
898
Experimental and numerical study of downward bubbly flow in a pipe
899
Experimental and numerical study of drill pipe erosion wear in gas drilling
900
Experimental and numerical study of dynamic strain ageing and its relation to ductile fracture of a C–Mn steel
901
Experimental and Numerical study of earth slope reinforcement using ordinary and rigid stone columns
902
Experimental and numerical study of ECAE deformation of polyolefins
903
Experimental and numerical study of elastic behavior of heterogeneous model materials with spherical inclusions
904
Experimental and numerical study of electrochemical chloride removal from brick and concrete specimens
905
Experimental and numerical study of electronic module-cooling heat sinks used in a variable frequency air-conditioner outdoor unit
906
Experimental and Numerical Study of Energy Absorption Capacity of Glass Reinforced Self-compacting Concrete Beams
907
Experimental and numerical study of energy consumption in forward and backward rod extrusion
908
Experimental and numerical study of ethanol oxidation in sub-critical water
909
Experimental and numerical study of fastener pull-through failure in GFRP laminates
910
Experimental and numerical study of flame ball IR and UV emissions
911
Experimental and numerical study of flammability limits of gaseous mixtures in porous media
912
Experimental and numerical study of fluid dynamic parameters in a jetting fluidized bed of a binary mixture
913
Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading
914
Experimental and numerical study of forced shock-wave oscillations in a transonic channel
915
Experimental and numerical study of fracture mechanisms in UO2 nuclear fuel
916
Experimental and numerical study of frost formation by natural convection over a cold horizontal circular cylinder
917
Experimental and numerical study of heat and moisture transfers by natural convection in a cavity filled with solid obstacles
918
Experimental and numerical study of heat flux distribution in laser forming of bi-layer sheets
919
Experimental and numerical study of heat transfer across insulation wall of a refrigerated integral panel van
920
Experimental and numerical study of heat transfer phenomena, inside a flat-plate integrated collector storage solar water heater (ICSSWH), with indirect heat withdrawal
921
Experimental and numerical study of hydrogen addition in a natural gas heavy duty engine for a bus vehicle
922
Experimental and numerical study of initial water mobility in bitumen reservoirs and its effect on SAGD
923
Experimental and Numerical Study of In-Plane Loading of Thin-Walled Tubes with Different Section Shapes and Wall Thickness
924
Experimental and Numerical Study of Lateral Loadings on the Composite Tubes with SMA and Aluminum Wires and Without Wire
925
Experimental and numerical study of low frequency pulsed Nd:YAG laser heating of slip cast fused silica ceramics for laser assisted turning process considering laser beam overlapping
926
Experimental and numerical study of machined aluminum tailor-made blanks
927
Experimental and numerical study of melting in a cylinder
928
Experimental and numerical study of melting of particle-laden materials in a cylinder
929
Experimental and numerical study of mixed convection with flow reversal in coaxial double-duct heat exchangers
930
Experimental and Numerical Study of Nano-Silica Additions on the Local Bond of Ultra-High Performance Concrete and Steel Reinforcing Bar
931
Experimental and numerical study of natural ventilation in four-sided wind tower traps
932
Experimental and numerical study of oblique impact on woven composite sandwich structure: Influence of the firing axis orientation
933
Experimental and numerical study of optimal die profile in cold forward rod extrusion of aluminum
934
Experimental and numerical study of optimum die profile in backward rod extrusion
935
Experimental and numerical study of peculiarities at high-velocity interaction between a projectile and discrete bumpers
936
Experimental and Numerical Study of Perforated Steel Plate Shear Panels
937
Experimental and numerical study of polypropylene behavior using an hyper-visco-hysteresis constitutive law
938
Experimental and numerical study of premixed flame propagation in a closed duct with a 90° curved section
939
Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink
940
Experimental and numerical study of proton exchange membrane fuel cell with spiral flow channels
941
Experimental and numerical study of pulsatile flows through stenosis:: Wall shear stress analysis
942
Experimental and numerical study of repair techniques for panels with geometrical discontinuities
943
Experimental and numerical study of residual stress evolution in cold spray coating
944
Experimental and Numerical Study of Residual Stress in the WC-12Co HVOF Sprayed Coatings
945
Experimental and numerical study of reverse re-drawing of anisotropic sheet metals
946
Experimental and numerical study of room airflow under stratum ventilation
947
Experimental and numerical study of short pulse effects in FELs
948
Experimental and numerical study of short pulse effects in FELs
949
Experimental and numerical study of sidewall profile effects on flow and heat transfer inside microchannels
950
Experimental and numerical study of single and two-phase flow and heat transfer in aluminum foams
951
Experimental and numerical study of single-phase pressure drop in downhole shut-in valve
952
Experimental and numerical study of SiON microresonators with air and polymer cladding
953
Experimental and numerical study of sluice gate flow pattern with non- suppressed sill and its effect on discharge coefficient in free-flow conditions
954
Experimental and numerical study of soil-reinforcement effects on the low-strain stiffness and bearing capacity of shallow foundations
955
Experimental and numerical study of solids circulation in gas-vibro fluidized beds
956
Experimental and numerical study of stamp hydroforming of sheet metals
957
Experimental and numerical study of stamp hydroforming of sheet metals
958
Experimental and numerical study of stamp hydroforming of sheet metals
959
Experimental and numerical study of steam gasification of a single charcoal particle
960
Experimental and numerical study of stratification and solidification/melting behaviors
961
Experimental and numerical study of strengthened single storey brick building under torsional moment
962
Experimental and numerical study of stress–strain state of pressurised cylindrical shells with external defects
963
Experimental and numerical study of sub-critical crack growth in Meuse/Haute-Marne argillite
964
Experimental and numerical study of surface alloying by femtosecond laser radiation
965
Experimental and numerical study of the accuracy of flame-speed measurements for methane/air combustion in a slot burner
966
Experimental and numerical study of the anti-crossflows impingement cooling structure
967
Experimental and numerical study of the chemical composition of WSex thin films obtained by pulsed laser deposition in vacuum and in a buffer gas atmosphere
968
Experimental and numerical study of the cold crucible melting process
969
Experimental and numerical study of the dependency of interface fracture in concrete–rock specimens on mode mixity
970
Experimental and numerical study of the dispersion of motor vehicle pollutants under idle condition
971
Experimental and numerical study of the effect of raceway waviness on the oil film in thrust ball bearings
972
EXPERIMENTAL AND NUMERICAL STUDY OF THE EFFECT OF STIFFENING-RINGS ON REDUCING THE THICKNESS OF TORISPHERICAL HEADS WITH PRESSURE ON THEIR CONCAVE SIDE*
973
Experimental and numerical study of the effective thermal conductivity of nano composites with thermal boundary resistance
974
Experimental and numerical study of the effects of nanoparticles on pyrolysis of a polyamide 6 (PA6) nanocomposite in the cone calorimeter
975
Experimental and numerical study of the effects of the oxygen index on the radiation characteristics of laminar coflow diffusion flames
976
Experimental and numerical study of the elastic modulus vs temperature of debonded model materials
977
Experimental and numerical study of the emitter turn-off thyristor (ETO)
978
Experimental and numerical study of the fatigue behaviour of composite patch reinforced cracked steel plates
979
Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques
980
Experimental and numerical study of the heat transfer along a blunt flat plate
981
Experimental and numerical study of the hydraulic jump of an impinging jet on a moving surface
982
Experimental and numerical study of the impact behavior of SMC plates
983
Experimental and numerical study of the impact behavior of SMC plates
984
Experimental and numerical study of the low-cycle fatigue behaviour of a cast metal matrix composite Al–SiCp
985
Experimental and numerical study of the Mars Pathfinder vehicle
986
Experimental and numerical study of the Mars Sample Return Orbiter in cold laminar hypersonic flow
987
Experimental and numerical study of the method to determine the creep parameters from the indentation creep testing
988
Experimental and numerical study of the method to determine the creep parameters from the indentation creep testing
989
Experimental and numerical study of the natural convection from a heated horizontal cylinder
990
Experimental and numerical study of the natural convection from a heated horizontal cylinder wrapped with a layer of textile material
991
Experimental and Numerical Study of the Open-Hole Tensile Strength of Carbon/Epoxy Composites
992
Experimental and numerical study of the periodic bubbling regime in planar co-flowing air–water sheets
993
Experimental and numerical study of the ploughing part of abrasive wear
994
Experimental and numerical study of the pulverised-fuel distribution in the mill-duct system of the Loy Yang B lignite fuelled power station
995
Experimental and numerical study of the relation between flow paths and fate of a pesticide in a riparian wetland
996
Experimental and numerical study of the response of flexible laminates to impact loading
997
Experimental and numerical study of the role of crystallographic texture on the formability of an electro-galvanized steel sheet
998
Experimental and numerical study of the role of NCN in prompt-NO formation in low-pressure CH4–O2–N2 and C2H2–O2–N2 flames
999
Experimental and numerical study of the room temperature elastic modulus of model materials with partly bonded matrix/particles interfaces
1000
Experimental and numerical study of the sloshing motion in a rectangular tank with a perforated screen
