<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Finite element formulation for modeling nonlinear viscoelastic elastomers Original Research Article
2
Finite element formulation for modeling particle debonding in reinforced elastomers subjected to finite deformations Original Research Article
3
Finite element formulation for modeling sliding cable elements
4
Finite element formulation for modelling large deformations in elasto-viscoplastic polycrystals
5
Finite Element formulation for nonlinear analysis of masonry walls
6
Finite element formulation for non-smooth oscillations of an elastic beam with a friction device Original Research Article
7
Finite element formulation for the analysis of turbulent wind flow passing bluff structures using the RNG k−ε model
8
Finite element formulation for the free vibration analysis of embedded double-walled carbon nanotubes based on nonlocal Timoshenko beam theory
9
Finite element formulation of 3-D heat transfer problem for orthotropic materials
10
Finite element formulation of a composite double T-beam subjected to torsion
11
Finite element formulation of a generalized higher order shear deformation theory for advanced composite plates
12
Finite element formulation of a heat transfer problem for an axisymmetric composite structure
13
Finite element formulation of a new nonlocal damage model
14
Finite element formulation of a phase field model based on the concept of generalized stresses
15
Finite element formulation of a third order laminated finite rotation shell element
16
Finite element formulation of exact non-reflecting boundary conditions for the time-dependent wave equation
17
Finite element formulation of slender structures with shear deformation based on the Cosserat theory
18
Finite element formulation of smart piezoelectric composite plates coupled with acoustic fluid
19
Finite element formulation of the finite rotation solid element
20
Finite element formulation of the Ogden material model with application to rubber-like shells
21
Finite element formulation of the self-excited forces for time-domain assessment of wind-induced dynamic response and flutter stability limit of cable-supported bridges
22
Finite element formulation of various four unknown shear deformation theories for functionally graded plates
23
Finite element formulation of viscoelastic sandwich beams using fractional derivative operators
24
Finite element formulation with high-order absorbing boundary conditions for time-dependent waves Original Research Article
25
Finite element formulations and theoretical study for variable curvature friction pendulum system
26
Finite element formulations for exterior problems: application to hybrid methods, non-reflecting boundary conditions, and infinite elements
27
Finite element formulations for free vibration analysis of isotropic and orthotropic plates using two-variable re ned plate theory
28
FINITE ELEMENT FORMULATIONS FOR FRICTION PENDULUM SEISMIC ISOLATION BEARINGS
29
Finite element formulations for hyperelastic transversely isotropic biphasic soft tissues Original Research Article
30
Finite element formulations for transient dynamic analysis in structural systems with viscoelastic treatments containing fractional derivative models
31
Finite element formulations of one-dimensional elements with bond-slip
32
Finite element formulations of strain gradient theory for microstructures and the C0-1 patch test
33
Finite element free flexural vibration analysis of arbitrary plates
34
Finite element frequency-domain acoustic analysis of open-cell plastic foams
35
Finite element Galerkin method for the “good” Boussinesq equation Original Research Article
36
Finite Element Geometry Creation Using ThreeDimensional Laser Profilometry
37
Finite Element Geometry Creation Using ThreeDimensional Laser Profilometry
38
Finite element growth analysis for the craniofacial skeleton in patients with cleft lip and palate
39
Finite Element Hodge for spline discrete differential forms. Application to the Vlasov–Poisson system
40
Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites
41
Finite element implementation and validation of wear modelling in sliding polymer–metal contacts
42
Finite element implementation including sensitivity analysis of a simple finite strain viscoelastic constitutive law
43
Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains
44
Finite element implementation of a generalized friction model: application to an upsetting-sliding test
45
Finite element implementation of a generalized friction model: application to an upsetting-sliding test
46
Finite element implementation of a generalized friction model:: application to an upsetting–sliding test
47
Finite element implementation of a glass tempering model in three dimensions
48
Finite element implementation of a microstructure-based model for filled elastomers
49
Finite element implementation of a new sandwich homogenization procedure
50
Finite element implementation of a stochastic three dimensional finite-strain damage model for fibrous soft tissue Original Research Article
51
Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear
52
Finite element implementation of gradient plasticity models Part I: Gradient-dependent yield functions Original Research Article
53
Finite element implementation of gradient plasticity models Part II: Gradient-dependent evolution equations Original Research Article
54
Finite element implementation of incompressible, transversely isotropic hyperelasticity Original Research Article
55
Finite element implementation of large deformation micropolar plasticity exhibiting isotropic and kinematic hardening effects
56
Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue
57
Finite element implementation of nearly-incompressible rheological models based on multiplicative decompositions
58
Finite element implementation of non-linear elastoplastic constitutive laws using local and global explicit algorithms with automatic error control
59
Finite element implementation of virtual internal bond model for simulating crack behavior
60
Finite Element Instability Analysis of the Steel Joist of Continuous Composite Beams with Flexible Shear Connectors
61
Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
62
Finite element interval analysis of external loads identified by displacement input with uncertainty Original Research Article
63
Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio
64
Finite element inverse analysis using a photosynthetic algorithm
65
Finite Element Investigation and Optimization of Tool Wear in Drilling Process of Difficult-to-Cut Nickel-Based Superalloy using Response Surface Methodology
66
Finite element investigation of equal channel angular extrusion with back pressure
67
Finite element investigation of multi-phase transformation within carburized carbon steel
68
Finite element investigation of shear failure of lean duplex stainless steel plate girders
69
Finite element investigation of size effects on the mechanical behavior of nickel single crystals
70
Finite element investigation of the flow stress dependence of chip formation
71
Finite Element Investigation of the Fracture Potential of Highly Constrained Details in Steel Plate Members
72
Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars
73
Finite element investigation of the influence of material properties on the crushing characteristics of in-plane loaded composite sandwich panels
74
Finite element investigation of the structural behaviour of deck slabs in composite bridges
75
Finite element investigation of the structural response of corroded RC beams
76
Finite element investigation of traffic induced vibrations
77
Finite Element Investigation on Load Carrying Capacity of Corroded RC Beam Based on Bond-Slip
78
Finite element investigation on spring-back characteristics in sheet metal U-bending process
79
Finite element investigation on the structural behaviour of cold-formed steel bolted connections
80
Finite element investigations for the role of transformation plasticity on springback in hot press forming process
81
Finite element investigations of bolt clamping force and friction coefficient effect on the fatigue behavior of aluminum alloy 2024-T3 in double shear lap joint
82
Finite element investigations on the dynamic plastic buckling of a slender beam subject to axial impact
83
Finite element investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part I. Effect of pocket angle and volume on metal flow
84
Finite element large deflection static analysis of shallow and deep stiffened shells
85
Finite element large deflection static analysis of shallow and deep stiffened shells
86
Finite element LES and VMS methods on tetrahedral meshes
87
Finite element limit analyses of under-matched tensile specimens
88
Finite element limit analysis of anisotropic structures Original Research Article
89
Finite element limit load analysis of thin-walled structures by ANSYS (implicit), LS-DYNA (explicit) and in combination
90
Finite element limit loads for non-idealized through-wall cracks in thick-walled pipe
91
Finite element lower bound “yield line” analysis of isotropic slabs using rotation-free elements
92
Finite element matrices in congruent subdomains and their effective use for large-scale computations
93
FINITE ELEMENT MATRIX GENERATION ON A GPU
94
Finite element mesh for complex flow simulation
95
Finite element mesh generation over intersecting curved surfaces by tracing of neighbours
96
Finite element mesh update methods for fluid–structure interaction simulations
97
Finite Element Method (FEM) modeling of the powder compaction of cosmetic products: Comparison between simulated and experimental results
98
Finite element method analysis and control stratagem for machining deformation of thin-walled components
99
Finite Element Method Analysis of Compression Fractures on Whole-Spine Models Including the Rib Cage
100
Finite Element Method Analysis of Effect of Blade Clearance on Plate Shearing Process Original Research Article
101
Finite element method analysis on the stress and strain states in amorphous composites containing crystalline copper during compression
102
Finite element method and constitutive modelling and computation for unsaturated soils Original Research Article
103
Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole
104
Finite element method assisted stiffness design procedure for non-circular profile composite wastewater pipe linings
105
Finite element method based design and optimisation methodology for piezoelectric ultrasonic motors Original Research Article
106
Finite element method based Monte Carlo filters for structural system identification
107
Finite element method based simulation of stress–strain field in the quenching process
108
Finite element method computations in unbounded domains with nonzero but uniform far field decay
109
Finite element method failure analysis of a pressurized FRP cylinder under transverse impact loading
110
Finite element method for a nonlocal Timoshenko beam model
111
Finite element method for computational fluid dynamics to design photovoltaic thermal (PV/T) system configuration
112
Finite element method for conserved phase fields: Stress-mediated diffusional phase transformation
113
Finite element method for developing arbitrary surfaces to flattened forms
114
Finite element method for elliptic problems with edge singularities
115
Finite element method for epitaxial growth with attachment–detachment kinetics
116
Finite element method for frames with variable characteristics
117
Finite element method for free surface flow problems Original Research Article
118
Finite element method for generalized piezothermoelastic problems
119
FINITE ELEMENT METHOD FOR GRADIENT PLASTICITY AT LARGE STRAINS
120
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
121
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
122
Finite element method for linear micropolar elasticity and numerical study of some scale effects phenomena in MEMS
123
Finite element method for mixed elastohydrodynamic lubrication of journal-bearing systems
124
Finite element method for solving problems with singular solutions
125
Finite element method for stability and free vibration analyses of non-prismatic thin-walled beams
126
Finite Element Method for Static Cyclic Behavior of Steel Shear Wall with Corrugated Plates
127
Finite element method for the effect of various injection parameter on heat transfer for a power-law non-Newtonian fluid over a continuous stretched surface with thermal radiation
128
Finite element method for the feedback control of FGM shells in the frequency domain via piezoelectric sensors and actuators Original Research Article
129
Finite element method for the stress analysis of isotropic cylindrical helical spring
130
Finite Element Method for the Transient Process of the Separation of External Stores from Aircraft
131
Finite element method for time dependent scattering: nonreflecting boundary condition, adaptivity, and energy decay Original Research Article
132
Finite element method in plane Cosserat elasticity
133
Finite element method model of the mechanical behaviour of Jatropha curcas L. seed under compression loading
134
Finite Element Method of Composite Steel-Concrete Beams Considering Interface Slip and Uplift
135
FINITE ELEMENT METHOD OF DETERMINING DAYLIGHT FACTOR
136
Finite element method simulation of turbulent wavy core–annular flows using a k–ω turbulence model method
137
Finite element method simulations for two-phase material plastic strains
138
Finite element method simulations for two-phase material plastic strains
139
Finite element method simulations of heat flow in fixed bed solar water splitting redox reactors
140
Finite element method solution of electrically driven magnetohydrodynamic flow
141
Finite element method used in contact problems with dry friction
142
Finite element method-assisted acquisition of the matrix influence on the indentation results of an embedded hard phase
143
Finite element methodology for path integrals in fracture mechanics
144
Finite element methods for convection-diffusion problems using exponential splines on triangles
145
Finite element methods for materials modelling
146
Finite element methods for micropolar models of granular materials
147
Finite Element Methods for One Dimensional Fourth Order Semilinear Partial Differential Equation
148
Finite element methods for semilinear elliptic and parabolic interface problems
149
Finite element methods for structural hot spot stress determination—a comparison of procedures
150
Finite Element Methods for Structures with Large Stochastic Variations by I. Elishakoff and Y.J. Ren, Oxford University Press, Oxford, 2003, pp. ix+260, price £45, ISBN 0 19 852631 8
151
Finite element methods for the analysis of softening plastic hinges in beams and frames
152
Finite element methods for the analysis of strong discontinuities in coupled poro-plastic media Original Research Article
153
Finite element methods for the multi-scale modeling of softening hinge lines in plates at failure Original Research Article
154
Finite element methods for the non-linear mechanics of crystalline sheets and nanotubes
155
Finite element methods for the Stokes problem in R3 Original Research Article
156
Finite element methods for the Stokes problem on complicated domains
157
Finite element methods for the Stokes system based on a Zienkiewicz type N-simplex
158
Finite element methods for time-dependent convection–diffusion–reaction equations with small diffusion
159
Finite element methods for Timoshenko beam, circular arch and Reissner-Mindlin plate problems
160
Finite element methods for unsaturated porous solids and their application to dam engineering problems
161
Finite element methods with numerical quadrature for elliptic problems with smooth interfaces
162
Finite element methods with symmetric stabilization for the transient convection–diffusion–reaction equation
163
Finite element micromechanical analysis of the deformation and stress state dependent damage evolution in fiber reinforced metal matrix composites
164
Finite element micromechanical modeling the damping behaviors of PMMCs at room temperature
165
Finite element micromechanics model of impact compression of closed-cell polymer foams
166
Finite element microstructural homogenization techniques and intergranular, intragranular microstructural effects on effective diffusion coefficient of heterogeneous polycrystalline composite media
167
Finite element modal analysis and vibration-waveforms in health inspection of old bridges
168
Finite element model and size-dependent stability analysis of boron nitride and silicon carbide nanowires/nanotubes
169
Finite element model calibration effects on the earthquake response of masonry arch bridges
170
Finite element model creation and stability considerations of complex biological articulation: The human wrist joint
171
Finite element model for beef chilling using CFD-generated heat transfer coefficients
172
Finite element model for charge and discharge cycle of activated carbon hydrogen storage
173
Finite element model for the coupled radiative transfer equation and diffusion approximation
174
Finite element model for thermal analysis of ceramic heat exchanger tube under axial non-uniform convective heat transfer coefficient
175
Finite element model for vibration analysis of pre-twisted Timoshenko beam
176
Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory
177
Finite element model of a beam with a piezoceramic patch actuator
178
Finite element model of a lumbar spinal motion segment to predict circadian variation in stature
179
Finite element model of Cairo metro tunnel-Line 3 performance
180
Finite element model of efficient zig-zag theory for static analysis of hybrid piezoelectric beams
181
Finite element model of erosive wear on ductile and brittle materials
182
Finite element model of interdiffusion and reaction in polydisperse polymer blends
183
Finite element model of ionic nanowires with size-dependent mechanical properties determined by ab initio calculations
184
Finite element model of plate with elasto-plastic through crack
185
Finite element model of the contact between a vibrating conductor and a suspension clamp
186
Finite element model of thermal stress effects on stress distributions in rubber modified glassy polymers Part 1 - Single particle model
187
Finite element model of training in the superconducting quadrupole magnet SQ02 Original Research Article
188
Finite element model to study calcium distribution in oocytes involving voltage gated Ca2+ channel, ryanodine receptor and buffers
189
Finite element model to study two dimensional unsteady state calcium distribution in cardiac myocytes
190
Finite element model updating effects on nonlinear seismic response of arch dam–reservoir–foundation systems
191
Finite element model updating for a high-rise structure based on ambient vibration measurements
192
Finite element model updating from full-field vibration measurement using digital image correlation
193
Finite element model updating in structural dynamics by using the response surface method
194
Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters
195
Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
196
Finite element model updating of a small scale bridge
197
Finite element model updating of bolted lap joints implementing identification of joint affected region parameters
198
Finite Element Model Updating of Rotating Structures Using Different Optimisation Techniques
199
Finite element model updating taking into account the uncertainty on the modal parameters estimates
200
FINITE ELEMENT MODEL UPDATING USING ANTIRESONANT FREQUENCIES
201
Finite element model updating using variable separation
202
Finite element model updating using vibration test data under base excitation
203
Finite element model updating with damping identification
204
Finite element model updating: Multiple alternatives
205
Finite element model with continuous transverse shear stress for composite laminates in cylindrical bending
206
Finite element modeling and analysis of a cardboard shelter
207
Finite element modeling and analysis of a hybrid steel–PSC beam connection
208
Finite Element Modeling and Cutting Simulation of Inconel 718
209
Finite element modeling and design of pH/temperature sensitive hydrogel based biphasic twisting actuators
210
Finite Element Modeling and Experimental Study of the Spline Tube Forming
211
Finite element modeling and experimental validation of fretting wear scars in thin steel wires
212
Finite element modeling and experimental verification of lower extremity shape change under load
213
Finite element modeling and failure prediction of friction stir welded blanks
214
Finite Element Modeling and Mechanical Behavior of Masonry-Infilled RC Frame
215
Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements
216
Finite element modeling and optimization to prevent wire breakage in electro-discharge machining
217
Finite element modeling and robust vibration control of two-hinged plate using bonded piezoelectric sensors and actuators
218
Finite element modeling and shake-table testing of unidirectional infill masonry walls under out-of-plane dynamic loads
219
Finite element modeling and simulating of thermomechanic stress in thermocompression bondings
220
Finite element modeling and simulation for bending analysis of multi-layer printed circuit boards using woven fiber composite
221
FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITY
222
FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING
223
FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION
224
Finite element modeling approaches of human cervical spine facet joint capsule
225
Finite element modeling as a tool for predicting the fracture behavior of robocast scaffolds
226
Finite element modeling concepts and linear analyses of 3D regular open cell structures
227
Finite element modeling discretization requirements for the laser forming process
228
Finite element modeling discretization requirements for the laser forming process
229
Finite element modeling discretization requirements for the laser forming process
230
Finite Element Modeling for Buckling Analysis of Tapered Axially Functionally Graded Timoshenko Beam on Elastic Foundation
231
Finite element modeling for chemical mechanical polishing process under different back pressures
232
Finite element modeling for the mechanical behavior of dowel-type timber joints
233
Finite element modeling of 3D human mesenchymal stem cell-seeded collagen matrices exposed to tensile strain
234
Finite element modeling of a 3D coupled foot–boot model
235
Finite element modeling of a generic stemless hip implant design in comparison with conventional hip implants
236
Finite element modeling of a geosynthetic pullout test
237
Finite element modeling of a leaking third component migration from a heat source buried into a fluid saturated porous medium
238
Finite element modeling of a linear membrane shell problem using tangential differential calculus
239
Finite element modeling of a micro-drill and experiments on high speed ultrasonically assisted micro-drilling
240
Finite element modeling of a microelectronic structure under uniform thermal loading
241
Finite element modeling of a PE pipe heap leachate collection system
242
Finite element modeling of a progressively expanding shape memory stent
243
Finite Element Modeling of a Reinforced Concrete Column Strengthened with Steel Jacket
244
Finite element modeling of a superconducting fault current limiter
245
Finite element modeling of active control of functionally graded shells in frequency domain via piezoelectric sensors and actuators
246
Finite element modeling of adhesive contact using molecular potential
247
Finite element modeling of an electrostatic painting device
248
Finite element modeling of asymmetric and transient flowfields during physical vapor transport
249
Finite Element Modeling of Axially Loaded CFRP-Confined Rectangular Reinforced Concrete Columns
250
Finite Element Modeling of Balloon Angioplasty by Considering Overstretch of Remnant Non-diseased Tissues in Lesions
251
Finite element modeling of Balsa wood structures under severe loadings
252
Finite element modeling of block shear in structural tees
253
Finite element modeling of blood flow in arteries Original Research Article
254
Finite element modeling of blood flow-induced mechanical forces in the outflow tract of chick embryonic hearts
255
Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear loading
256
Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear
257
Finite element modeling of bolted steel connections designed by double channel
258
Finite element modeling of borehole heat exchanger systems: Part 1. Fundamentals
259
Finite element modeling of borehole heat exchanger systems: Part 2. Numerical simulation
260
Finite element modeling of bridges with equivalent orthotropic material method for multi-scale dynamic loads
261
Finite element modeling of clinch forming with automatic remeshing
262
Finite element modeling of coating formation and transient heat transfer in the electric arc spray process
263
Finite element modeling of composite plates with internal delamination
264
Finite element modeling of concrete beams prestressed with external tendons
265
Finite element modeling of concrete cover cracking due to non-uniform steel corrosion
266
Finite element modeling of confined concrete-I: Drucker–Prager type plasticity model
267
Finite element modeling of confined concrete-II: Plastic-damage model
268
Finite element modeling of consolidation of composite laminates
269
Finite element modeling of coupled heat transfer, moisture transport and carbonation processes in concrete structures
270
Finite element modeling of Cr(VI) reduction by Shewanella oneidensis MR-1 employing the dual-enzyme kinetic model
271
Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
272
Finite element modeling of crash test behavior for windshield laminated glass
273
Finite element modeling of creep deformation in cellular metals Original Research Article
274
Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons
275
Finite element modeling of cyclic thermal response of shape memory alloy wires with variable material properties
276
Finite element modeling of delamination by layerwise shell element allowing for interlaminar displacements
277
Finite element modeling of delamination by layerwise shell element allowing for interlaminar displacements
278
Finite element modeling of dislocation in solids and its applications to the analysis of GaN nanostructures
279
Finite element modeling of dislocation reduction in GaAs and InP single crystals grown from the VGF process
280
Finite element modeling of double skin profiled composite shear wall system under in-plane loadings
281
Finite element modeling of elasto-plastic contact between rough surfaces
282
Finite element modeling of electric current-activated sintering: The effect of coupled electrical potential, temperature and stress Original Research Article
283
Finite element modeling of electrochemical-poroelastic behaviors of conducting polymers
284
Finite element modeling of electro-mechanically coupled analysis for ferroelectric ceramic materials with defects Original Research Article
285
Finite element modeling of electron beam welding of a large complex Al alloy structure by parallel computations
286
Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry
287
Finite Element Modeling of Extensional Structures in the Annapurna Region of Central Himalayas
288
Finite element modeling of fluid–rock interaction problems in pore-fluid saturated hydrothermal/sedimentary basins Original Research Article
289
Finite element modeling of frequency dependent and temperature-dependent dynamic behavior of viscoelastic materials in simple shear
290
FINITE ELEMENT MODELING OF FRICTION STIR WELDING IN ALUMINUM ALLOYS JOINT
291
Finite element modeling of GTA weld surfacing applied to hot-work tooling
292
Finite element modeling of guyed back spars in cable logging
293
Finite element modeling of heat transfer in pulsed laser welding of similar and dissimilar carbon and stainless steels
294
Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Model development, verification and investigation of tube parameters
295
Finite element modeling of hollow and concrete-filled fiber composite tubes in flexure: Optimization of partial filling and a design method for poles
296
Finite element modeling of human skin using an isotropic, nonlinear elastic constitutive model
297
Finite element modeling of hydraulic fracturing on a reservoir scale in 2D
298
Finite element modeling of hydrogen diffusion in fusion zone of HQ130 high strength steel
299
Finite element modeling of hydrostatic extrusion for mono-core superconductor billets
300
Finite element modeling of impact, damage evolution and penetration of thick-section composites
301
Finite element modeling of incremental bridge launching and study on behavior of the bridge during construction stages
302
Finite element modeling of indentation into superhard coatings
303
Finite element modeling of interacting fault systems
304
Finite element modeling of interfacial forces and contact stresses of pneumatic tire on fresh snow for combined longitudinal and lateral slips
305
FINITE ELEMENT MODELING OF LARGE DEFORMATION VISCOELASTIC FRICTIONAL CONTACT SYSTEMS
306
Finite element modeling of laser bending of pre-loaded sheet metals
307
Finite element modeling of linear elastodynamics problems with explicit time-integration methods and linear elements with the reduced dispersion error
308
Finite element modeling of lipid bilayer membranes
309
Finite element modeling of low-velocity impact on laminated composite plates and cylindrical shells
310
Finite element modeling of mechanically fastened composite-aluminum joints in aircraft structures
311
Finite element modeling of melting crack tip under thermo-electric Joule heating
312
Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy
313
Finite element modeling of microstructurally small cracks using single crystal plasticity
314
Finite element modeling of multi-level cervical spinal segments (C3–C6) and biomechanical analysis of an elastomer-type prosthetic disc
315
Finite element modeling of multi-pass welding and shaped metal deposition processes
316
Finite element modeling of nanoindentation on C–S–H: Effect of pile-up and contact friction
317
Finite element modeling of nonlinear vibration behavior of piezo-integrated structures
318
Finite element modeling of non-orthogonal loosely woven fabrics in advanced occupant restraint systems
319
Finite element modeling of orthogonal micromachining of anisotropic pyrolytic carbon via damaged plasticity
320
Finite element modeling of passive material influence on the deformation and force output of skeletal muscle
321
Finite element modeling of passive material influence on the deformation and force output of skeletal muscle
322
Finite element modeling of plain weave fabrics from photomicrograph measurements
323
Finite element modeling of plastic anisotropy induced by texture and strain-path change
324
Finite element modeling of plasticity-induced crack closure due to occasional mode II loading on mode I fatigue crack growth
325
Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects
326
Finite element modeling of polymer curing in natural fiber reinforced composites
327
Finite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers
328
Finite element modeling of pore-fluid flow in the Dachang ore district, Guangxi, China: Implications for hydrothermal mineralization
329
Finite element modeling of porous titanium
330
Finite Element Modeling of Post-Tensioned TwoWay Concrete Slabs under Flexural Loading
331
Finite element modeling of power electronic circuits containing switches attached to saturable magnetic components
332
Finite element modeling of prestressed concrete spandrel beams
333
FINITE ELEMENT MODELING OF RANDOM WASTE COTTON FIBER REINFORCED POLYETHYLENE COMPOSITES
334
FINITE ELEMENT MODELING OF RC CONNECTIONS STRENGTHENED WITH FRP LAMINATES
335
Finite Element Modeling of Reinforced Concrete Beam-Column Connections
336
Finite element modeling of reinforced concrete beams exposed to fire
337
Finite element modeling of residual stress around holes in the thermal barrier coatings
338
Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius
339
Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius
340
Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius
341
Finite Element Modeling of Roller Burnishing Process
342
Finite element modeling of rolling process and optimization of process parameter
343
Finite element modeling of scattering problems involving infinite domains using drilling degrees of freedom Original Research Article
344
Finite element modeling of sheet-metal blanking operations with experimental verification
345
Finite element modeling of single-walled carbon nanotubes
346
Finite element modeling of smart plates/shells using higher order shear deformation theory
347
Finite element modeling of solid particle erosion in AISI 4140 steel and nickel–tungsten carbide composite material produced by the laser-based powder deposition process
348
Finite element modeling of spur gearing fractures
349
Finite element modeling of strain rate and grain size dependency in nanocrystalline materials
350
Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements
351
Finite element modeling of temporal evolution of the quasi-piezoelectric d33 coefficient of cellular piezoelectret Polypropylene film
352
Finite element modeling of textile composites
353
Finite Element Modeling of the Acoustic Wave Propagation From a Cavity Near a Free-Surface
354
Finite Element Modeling of the Acoustic Wave Propagation From a Cavity Near a Free-Surface
355
Finite element modeling of the contact interface between trans-tibial residual limb and prosthetic socket
356
Finite element modeling of the deformation behavior of semi-solid materials
357
Finite element modeling of the deformation of magnetoelastic film
358
Finite element modeling of the dynamic response of a composite reinforced concrete bridge for structural health monitoring
359
Finite element modeling of the effect of the ceramic coatings on heat transfer characteristics in thermal barrier applications
360
Finite element modeling of the elastic modulus of thermal barrier coatings
361
Finite element modeling of the filament winding process
362
Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel
363
Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel
364
Finite element modeling of the influence of anisotropic material properties on dislocations in metals
365
Finite element modeling of the influence of anisotropic material properties on dislocations in metals
366
Finite element modeling of the mechanical effects of the UV laser ablation of polymer coatings
367
Finite element modeling of the nonlinear oscillations in axisymmetric acoustic resonators
368
Finite element modeling of the porosity formation in castings
369
Finite element modeling of the quasi-static axial crushing of braided composite tubes
370
Finite element modeling of the resin transfer molding process based on homogenization techniques
371
Finite element modeling of the scratch response of a coated time-dependent solid
372
Finite element modeling of the shear capacity of RC beams strengthened with FRP sheets by considering different failure modes
373
Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process Original Research Article
374
Finite element modeling of the transient heat conduction between colliding particles
375
Finite element modeling of the tubular hydroforming process: Part 1. Strain rate-independent material model assumption
376
Finite element modeling of the uniaxial compression behavior of carbon microballoons Original Research Article
377
Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites
378
Finite element modeling of tire/terrain interaction: Application to predicting soil compaction and tire mobility
379
Finite element modeling of transmission laser microjoining process
380
Finite element modeling of transmission line under downburst wind loading
381
Finite element modeling of transverse impact on a ballistic fabric
382
Finite element modeling of transverse impact on a ballistic fabric
383
Finite element modeling of transverse impact on a ballistic fabric
384
Finite element modeling of tube hydroforming of polycrystalline aluminum alloy extrusions
385
Finite element modeling of ultrasonic surface rolling process
386
Finite element modeling of vibration and sound radiation from fluid-loaded damped shells
387
Finite element modeling of weld-bonded joints
388
Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction
389
Finite element modelling and analysis of bolted joints of 3D tubular structures
390
Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens
391
Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals
392
Finite element modelling and experimental modal testing of a three-dimensional framework
393
Finite element modelling and experimental modal testing of a three-dimensional framework
394
Finite element modelling and experimental modal testing of a three-dimensional framework
395
Finite element modelling and investigation of the behaviour of elastic infilled frames under monotonic loading
396
Finite element modelling and optimisation of net-shape metal forming processes with uncertainties
397
finite element modelling and simulation of the hysteretic behaviour of single- and bi-metal cantilever beams using a modified non-linear beta-damping model
398
Finite element modelling and strength analysis of hold No. 1 of bulk carriers
399
Finite element modelling and testing of an injection moulded generic tow reinforced structure
400
Finite element modelling and updating of a lively footbridge: The complete process
401
Finite element modelling approaches to the accurate dimensional prediction for a cold-Tforged part
402
Finite element modelling for fatigue stress analysis of large suspension bridges
403
Finite element modelling for the investigation of in-plane modes and damping shims in disc brake squeal
404
Finite element modelling investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part II. Effect of pocket geometry configurations on metal flow
405
Finite element modelling of a rammed earth wall
406
Finite element modelling of a silo based on experimental modal analysis
407
Finite element modelling of a submerged arc welding process
408
Finite element modelling of a unilateral fixator for bone reconstruction: Importance of contact settings
409
Finite element modelling of abrasive waterjet milled footprints
410
Finite element modelling of Al/SiCp metal matrix composites with particles aligned in stripes—a 2D–3D comparison
411
Finite element modelling of an Al–Mn alloy by equal channel angular extrusion (ECAE)
412
Finite element modelling of anisotropic elastic-viscoplastic behaviour of metals
413
Finite element modelling of anisotropic elastic-viscoplastic behaviour of metals
414
Finite element modelling of anisotropic elasto-plastic timber composite beams with openings
415
Finite element modelling of axially crushed silk/epoxy composite square tubes
416
Finite Element Modelling of Ball Screw Feed Drive Systems
417
Finite element modelling of brazed residual stress and its influence factor analysis for stainless steel plate-fin structure
418
Finite element modelling of bridging micro-mechanics in through-thickness reinforced composite laminates
419
Finite element modelling of brittle fracture of thick coatings under normal and tangential loading
420
Finite element modelling of cable networks with flexible supports
421
Finite Element Modelling of Car Hood Panel for Pedestrian Protection during Impact
422
Finite element modelling of castellated timber I-joists
423
Finite element modelling of CFRP/steel double strap joints subjected to dynamic tensile loadings
424
Finite element modelling of closed cracks in eddy current testing
425
Finite element modelling of cold isostatic pressing
426
Finite element modelling of compartment masonry walls in fire
427
Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus
428
Finite element modelling of composite consolidation from fibre and wire lay-ups
429
Finite element modelling of composite consolidation from fibre and wire lay-ups
430
Finite element modelling of concrete cover separation failure in FRP plated RC beams
431
Finite element modelling of core thickness effects in aluminium foam/composite sandwich structures under flexural loading
432
Finite element modelling of crack growth and wear particle formation in sliding contact
433
Finite element modelling of crack propagation in carbohydrate extruded starch with open void structure
434
Finite element modelling of crack propagation in metal powder compaction using Mohr–Coulomb and Elliptical Cap yield criteria
435
Finite element modelling of cracked inelastic shells with large deflections: two-dimensional and three-dimensional approaches
436
Finite element modelling of crash response of composite aerospace sub-floor structures
437
Finite element modelling of damage induced by low-velocity impact on composite laminates
438
Finite element modelling of damage progression in non-crimp fabric reinforced composites
439
Finite element modelling of deformation characteristics of historical stone masonry shear walls
440
Finite element modelling of dissipative structures for nonequilibrium chemical reactions in fluid-saturated porous media Original Research Article
441
Finite element modelling of double skin composite slabs
442
FINITE ELEMENT MODELLING OF EXTENDED END-PLATE BEARING TYPE CONNECTION
443
Finite element modelling of fibre reinforced polymer sandwich panels exposed to heat
444
Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load
445
Finite element modelling of flexible pavements on soft soil subgrades
446
Finite element modelling of flexural behaviour of externally bonded CFRP reinforced concrete structures
447
Finite element modelling of free surface flows on inclined and curved beds
448
Finite element modelling of fretting wear surface evolution: Application to a Ti–6A1–4V contact
449
Finite element modelling of frictional bridging during fatigue crack growth in fibre-reinforced metal matrix composites
450
Finite element modelling of frictional slip in heavy lift sling systems
451
Finite element modelling of glenohumeral kinematics following total shoulder arthroplasty
452
Finite element modelling of high air pressure forming processes for polymer sheets
453
Finite element modelling of hybrid active-passive vibration damping of multilayer piezoelectric sandwich beams - part I: Formulation
454
Finite element modelling of hybrid active-passive vibration damping of multilayer piezoelectric sandwich beams - part II: System analysis
455
Finite element modelling of impact on preloaded composite panels
456
FINITE ELEMENT MODELLING OF INFINITE EULER BEAMS ON KELVIN FOUNDATIONS EXPOSED TO MOVING LOADS IN CONVECTED CO-ORDINATES
457
FINITE ELEMENT MODELLING OF INTERNALLY PRESSURIZED CLOSED CELL COMPOSITES
458
Finite element modelling of ion transport in the electrolyte of a 3D-microbattery
459
Finite Element Modelling of Laboratory Tests on Reinforced Concrete Beams Containing Recycled Aggregate Concrete
460
FINITE ELEMENT MODELLING OF LAMINATED PIEZO-ELASTIC STRUCTURES: LYAPUNOV STABILITY ANALYSIS
461
Finite element modelling of load bearing cold-formed steel wall systems under fire conditions
462
Finite element modelling of low temperature forming of polymer films with application in in-mould decoration
463
Finite element modelling of low-speed femur reaming using reamers with irregular tooth spacing
464
Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
465
FINITE ELEMENT MODELLING OF MAGNETIC CONSTRAINED LAYER DAMPING
466
Finite element modelling of medical devices
467
Finite element modelling of mixed film lubrication in cold strip rolling
468
Finite element modelling of moisture related and visco-elastic deformations in inhomogeneous timber beams
469
Finite element modelling of mooring lines Original Research Article
470
Finite element modelling of multiple cohesive discrete crack propagation in reinforced concrete beams
471
Finite element modelling of nanoscale inhomogeneities in an elastic matrix
472
Finite element modelling of orthotropic material behaviour in pneumatic membranes
473
Finite element modelling of overlapping abrasive waterjet milled footprints
474
Finite element modelling of passive damping with resistively shunted piezocomposites
475
Finite element modelling of piezolaminated smart structures for active vibration control with distributed sensors and actuators
476
Finite element modelling of plantar pressure beneath the second ray with flexor muscle loading
477
Finite element modelling of plastic instability during ECAP processing of flow-softening materials
478
Finite element modelling of plate girders with web openings
479
Finite element modelling of primary hip stem stability: The effect of interference fit
480
Finite Element Modelling of RC T Beams Reinforced Internally with GFRP Reinforcements
481
Finite element modelling of reinforced concrete framed structures including catenary action
482
Finite element modelling of reinforcement with bond
483
Finite element modelling of rubber-like materials — a comparison between simulation and experiment
484
Finite element modelling of rubber-like materials — a comparison between simulation and experiment
485
Finite element modelling of rubber-like polymers based on chain statistics
486
Finite element modelling of sandwich box column with viscoelastic layer for passive vibrations control under seismic loading
487
Finite element modelling of semi and nonpolar GaN/AlN quantum dots
488
Finite element modelling of semi-rigid composite joints
489
Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity
490
Finite Element Modelling of Single Cell Based on Atomic Force Microscope Indentation Method
491
Finite element modelling of skeletal muscles coupled with fatigue
492
Finite element modelling of skeletal muscles coupled with fatigue
493
Finite element modelling of solidification effects in mould filling
494
FINITE ELEMENT MODELLING OF SPATIALLY CHAOTIC STRUCTURES
495
Finite element modelling of steel-caged RC columns subjected to axial force and bending moment
496
Finite element modelling of structural stainless steel cross-sections
497
FINITE ELEMENT MODELLING OF STRUCTURES INCLUDING PIEZOELECTRIC ACTIVE DEVICES
498
Finite element modelling of surface tension effects using a Lagrangian-Eulerian kinematic description Original Research Article
499
Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools
500
Finite element modelling of temperature gradient driven rock alteration and mineralization in porous rock masses Original Research Article
501
Finite element modelling of tensile deformation and failure of aluminium plate exposed to fire
502
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography
503
Finite element modelling of the actual structure of cellular materials determined by X-ray tomography Original Research Article
504
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
505
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
506
Finite element modelling of the coupled bending and torsional free vibration of uniform beams with an arbitrary cross-section
507
Finite element modelling of the effect of a functionally graded protective coating for SiC monofilaments on Ti-based composite behaviour
508
Finite element modelling of the effect of a functionally graded protective coating for SiC monofilaments on Ti-based composite behaviour
509
Finite element modelling of the effective elastic properties of partially saturated rocks
510
Finite element modelling of the electrical impulse induced fracture of a high voltage varistor
511
Finite element modelling of the evolution of pressure solution cleavage
512
Finite element modelling of the evolution of surface pits in metal forming processes
513
Finite element modelling of the flexural performance of resorbable phosphate glass fibre reinforced PLA composite bone plates
514
Finite element modelling of the fracture behaviour of brittle coatings
515
Finite element modelling of the inertia friction welding process between dissimilar materials
516
Finite element modelling of the mechanical behaviour of onion epidermis with incorporation of nonlinear properties of cell walls and real tissue geometry Original Research Article
517
Finite element modelling of the mechanical behaviour of vitreous starch/protein composite Original Research Article
518
Finite element modelling of the one meter drop test on a steel bar for the CASTOR cask Original Research Article
519
Finite element modelling of the pelvis: Inclusion of muscular and ligamentous boundary conditions
520
Finite element modelling of the progressive crushing of braided composite tubes under axial impact
521
Finite element modelling of the semi-rigid behaviour of pultruded FRP connections
522
Finite Element Modelling of the Steady Rolling of a Radial Tyre with Detailed Tread Pattern.
523
Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining
524
Finite element modelling of the tricuspid valve: A preliminary study
525
Finite element modelling of the vibrational behaviour of the human femur using CT-based individualized geometrical and material properties
526
Finite element modelling of thermal fatigue effects in IGBT modules
527
Finite element modelling of thermal transport in ceramic matrix composites
528
Finite element modelling of thermally bonded bicomponent fibre nonwovens: Tensile behaviour
529
Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness
530
Finite element modelling of topographic effects on elastic ground deformation at Mt. Etna
531
Finite element modelling of two phase Fe–Cu polycrystals
532
Finite element modelling of unbending tests with damage approach and experimental verification
533
Finite element modelling of unreinforced masonry shear wallettes strengthened using twisted steel bars
534
Finite element modelling of viscosity-dominated hydraulic fractures
535
Finite element modelling of wall pressures in a cylindrical silo with conical hopper using an Arbitrary Lagrangian–Eulerian formulation
536
Finite element modelling of welded aluminium members subjected to four-point bending
537
Finite element modelling of wooden structures at large deformations and brittle failure prediction
538
Finite element modelling of z-pinned composite T-joints
539
Finite element modelling simulation of radial forging of tubes without mandrel
540
Finite element modelling simulation of transverse welding phenomenon in aluminium extrusion process
541
Finite element models and cyclic behavior of self-centering steel post-tensioned connections with web hourglass pins
542
Finite element models for laminated shells with actuation capability
543
Finite element models for nonlinear analysis of steel–concrete composite beams with partial interaction in combined bending and shear
544
Finite element models for use in mechanics including geological engineering
545
Finite element models in the steel industry: Part I: Simulation of flat product manufacturing processes
546
Finite element models in the steel industry: Part II: Analyses of tubular products performance
547
Finite element models in tissue mechanics and orthopaedic implant design
548
Finite element models of rib as an inhomogeneous beam structure under high-speed impacts
549
Finite element models of spot welds in structural dynamics: review and updating
550
Finite element models predict cancellous apparent modulus when tissue modulus is scaled from specimen CT-attenuation
551
Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomography
552
Finite element moving mesh analysis of phase change problems with natural convection
553
Finite element nonlinear dynamic analysis of sandwich plates with partially detached facesheet and core
554
Finite element numerical evaluation of elliptical hollow section steel columns in fire
555
Finite element numerical modeling of geogrid-reinforced shallow foundation’s behavior on loose soils
556
Finite element of slender beams in finite transformations: a geometrically exact approach
557
Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators
558
Finite element planar stress analysis
559
Finite element plastic loads for circumferential cracked pipe bends under in-plane bending
560
Finite element prediction of crack formation induced by quenching in a forged valve
561
Finite element prediction of damping of composite GFRP and CFRP laminates – a hybrid formulation – vibration damping experiments and Rayleigh damping
562
Finite element prediction of damping of composite GFRP and CFRP laminates – a hybrid formulation – vibration damping experiments and Rayleigh damping
563
Finite element prediction of ductile fracture in sheet metal forming processes
564
FINITE ELEMENT PREDICTION OF DUCTILE FRACTURE INAUTOMOTIVE PANEL FORMING: COMPARISON BETWEEN FLD AND LEMAITRE DAMAGE MODELS
565
Finite element prediction of interfacial stresses in structural members bonded with a thin plate
566
Finite element prediction of proximal femur fracture pattern based on orthotropic behaviour law coupled to quasi-brittle damage
567
Finite element prediction of surface strain and fracture strength at the distal radius
568
Finite element prediction of the influence of confinement on RC beam–columns under single or double curvature bending
569
Finite Element Prediction of Transient Temperature Distribution in a Grain Storage Bin
570
Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification
571
Finite element prediction on the structural performance of profiled steel sheet dry board structural composite system proposed as a disaster relief shelter
572
Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials
573
Finite element predictions of residual stresses in press-braked thin-walled steel sections
574
Finite element procedure for solving contact thermoelastoplastic problems at large strains, normal and high pressures Original Research Article
575
Finite element procedures for nonlinear structures in moving coordinates. Part 1: Infinite bar under moving axial loads
576
Finite element procedures for nonlinear structures in moving coordinates. Part II: Infinite beam under moving harmonic loads
577
Finite element process modelling of inertia friction welding advanced nickel-based superalloy
578
Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis Original Research Article
579
Finite Element Reconstruction of a Mandibular First Molar
580
Finite element recovery techniques for local quantities of linear problems using fundamental solutions
581
Finite element reduced order models for nonlinear vibrations of piezoelectric layered beams with applications to NEMS
582
Finite element reliability analysis of bridge girders considering moment–shear interaction
583
Finite element remeshing in metal forming using hexahedral elements
584
FINITE ELEMENT REMESHING: A METAL FORMING APPROACH FOR QUADRILATERAL MESH GENERATION AND REFINEMENT
585
Finite element resistivity modelling for three-dimensional structures with arbitrary anisotropy
586
Finite element response sensitivity analysis of multi-yield-surface J2 plasticity model by direct differentiation method
587
Finite Element Response Sensitivity Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection
588
Finite element response sensitivity analysis using force-based frame models
589
Finite element response sensitivity analysis using three-field mixed formulation: general theory and application to frame structures
590
Finite element response sensitivity analysis: a comparison between force-based and displacement-based frame element models Original Research Article
591
Finite element schemes for non-linear problems in infinite domains
592
Finite element seismic safety assessment of water intake structures
593
Finite element shakedown analysis of reinforced concrete 3D frames
594
Finite element shakedown analysis of two-dimensional structures
595
Finite element simulation and analytical analysis for nano field emission sources that terminate with a single atom: A new perspective on nanotips
596
Finite element simulation and ANFIS prediction of dimensional error effect on distribution of BPP/GDL contact pressure in a PEM fuel cell
597
Finite element simulation and experiment in tube hydroforming of unequal T shapes
598
Finite element simulation and experimental investigation of forming micro-gear with Zr–Cu–Ni–Al bulk metallic glass
599
Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning
600
Finite element simulation and experimental investigation on the forming forces of 3D non-axisymmetrical tubes spinning
601
Finite element simulation and experimental investigation on thermal conductivity of diamond/aluminium composites with imperfect interface
602
Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels
603
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation
604
Finite element simulation and experimental validation of fretting wear
605
Finite element simulation and experimental validation of residual stresses in high speed dry milling of biodegradable magnesium–calcium alloys
606
Finite element simulation and model optimization of blankholder gap and shell element type in the stamping of a washing-trough
607
Finite Element simulation coupled to optimisation stochastic process to assess the effect of heat treatment on the mechanical properties of 42CrMo4 steel
608
Finite element simulation for analysing experimental friction tests under severe conditions
609
Finite element simulation for charge–discharge cycle of cryo-adsorptive hydrogen storage on activated carbon
610
Finite element simulation for die-cavity compensation
611
Finite element simulation for dynamic large elastoplastic deformation in metal powder forming
612
Finite element simulation for fluid–solid coupling effect on depressurization-induced gas production from gas hydrate reservoirs
613
Finite element simulation for interfacial evolutions
614
Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation Original Research Article
615
Finite element simulation for superplastic forming using a non-Newtonian viscous thick section element
616
Finite Element Simulation in Superplastic forming of Friction Stir Welded Aluminium Alloy 6061-T6
617
Finite element simulation of 3D sheet metal guillotining using advanced fully coupled elastoplastic-damage constitutive equations
618
Finite element simulation of a coating formation on a turbine blade during plasma spraying
619
Finite element simulation of a layout optimisation technique by photoelastic stress minimisation
620
Finite element simulation of a new deformation type occurring in changing-channel extrusion
621
Finite element simulation of a polycrystalline ferroelectric based on a multidomain single crystal switching model
622
Finite Element simulation of a slow moving natural slope in the Upper-Austrian Alps using a visco-hypoplastic constitutive model
623
Finite element simulation of a turbulent MHD system: comparison to a pseudo-spectral simulation Original Research Article
624
Finite element simulation of a twin-cam 16-valve cylinder structure
625
Finite element simulation of a two-phase viscoplastic material: calculation of the mechanical behaviour
626
Finite element simulation of acoustic cavitation in the reservoir and effects on dynamic response of concrete dams
627
Finite element simulation of anisotropic damage accumulation and creep in acrylic bone cement
628
Finite element simulation of arcuates for astigmatism correction
629
Finite element simulation of barge impact into a rigid wall
630
FINITE ELEMENT SIMULATION OF BLANKING PROCESS
631
Finite element simulation of blood flow in the cerebral artery Original Research Article
632
Finite Element simulation of buckling-induced vein tortuosity and influence of the wall constitutive properties
633
Finite element simulation of bulge forming of a cross-joint from a tubular blank
634
Finite element simulation of cell–substrate decohesion by laser-induced stress waves
635
Finite element simulation of chip flow in metal machining
636
Finite element simulation of chip flow in metal machining
637
Finite element simulation of chip flow in metal machining
638
Finite element simulation of chip formation in orthogonal metal cutting
639
Finite element simulation of cold isostatic pressing and sintering of SiC components
640
Finite element simulation of cold rolling of thin strip
641
Finite Element Simulation of Cold-Rolling Process of Shaped Steel Tube for Driving Shaft Original Research Article
642
Finite element simulation of compressible particle-laden gas flows
643
Finite Element Simulation of Contact Mechanics of Cancer Cells in Manipulation Based on Atomic Force Microscopy
644
Finite element simulation of conventional and high speed machining of Ti6Al4V alloy
645
Finite element simulation of crack growth path and stress intensity factors evaluation in linear elastic materials
646
Finite element simulation of cross equal channel angular pressing
647
Finite element simulation of debonding in FRP-to-concrete bonded joints
648
Finite element simulation of deep bed filtration
649
Finite element simulation of deep cryogenic treatment incorporating transformation kinetics
650
Finite Element Simulation of Deep Drawing of Tailored Heat Treated Blanks
651
Finite element simulation of deformation behavior of pure aluminum during equal channel angular pressing
652
Finite element simulation of deformation behavior of semi-crystalline polymers with multi-spherulitic mesostructure
653
Finite element simulation of deformation behavior of semi-crystalline polymers with multi-spherulitic mesostructure
654
Finite element simulation of delamination growth in composite materials using LS-DYNA
655
Finite element simulation of dense wire packings
656
Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation
657
Finite element simulation of dislocation generation in doped and undoped GaAs single crystals grown from the melt
658
Finite Element Simulation of Displaced ZMC Fracture After Fixation with Resorbable and Non-Resorbable One-Point Mini-Plates and Applying Normal to Severe Occlusal Loads
659
Finite element simulation of drying of mango
660
FINITE ELEMENT SIMULATION OF DYNAMIC BEHAVIOUR OF OPEN-ENDED CANTILEVER PIPE CONVEYING FLUID
661
Finite Element simulation of dynamic buckling of cylinders subjected to periodic shear
662
Finite element simulation of dynamic fracture and fragmentation of glass rods Original Research Article
663
Finite element simulation of dynamic strain-localization: A multi-scale problem Original Research Article
664
Finite element simulation of dynamic wetting flows as an interface formation process
665
Finite element simulation of early creep and wear in total hip arthroplasty
666
Finite element simulation of elastohydrodynamic lubrication of soft biological tissues
667
Finite element simulation of electrochemical ac diffusional impedance. Application to recessed microdiscs
668
Finite element simulation of electrochemically reversible, quasi-reversible and irreversible linear sweep voltammetry at the wall tube electrode
669
Finite element simulation of equal channel angular extrusion
670
Finite element simulation of explosively-driven plate impact with application to explosive welding
671
Finite element simulation of fine blanking processes using a pressure-dependent damage model
672
Finite Element Simulation of Forced Convection in a Flat Plate Solar Collector: Influence of Nanofluid with Double Nanoparticles
673
Finite element simulation of fracture behaviour for aged duplex stainless steels
674
Finite element simulation of fretting wear and fatigue in thin steel wires
675
Finite element simulation of heat and mass transfer in activated carbon hydrogen storage tank
676
FINITE ELEMENT SIMULATION OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 7050
677
Finite element simulation of high speed pulse welding of high specific strength metal alloys
678
Finite element simulation of high-pressure water-jet assisted metal cutting
679
Finite element simulation of high-pressure water-jet assisted metal cutting
680
Finite element simulation of high-pressure water-jet assisted metal cutting
681
Finite element simulation of high-speed cutting forces
682
Finite Element Simulation of Hot Strip Continuous Rolling Process Coupling Microstructural Evolution Original Research Article
683
Finite element simulation of hydromagnetic convective flow in an obstructed cavity
684
Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
685
Finite element simulation of interface cracks in thermal barrier coatings
686
Finite element simulation of interfacial segregation in dilute alloys
687
Finite element simulation of jetting behaviour in metal injection molding using remeshing scheme
688
Finite element simulation of large-strain single-crystal viscoplasticity: An investigation of various hardening relations
689
Finite element simulation of laser tube bending: Effect of scanning schemes on bending angle, distortions and stress distribution
690
Finite element simulation of low velocity impact on shape memory alloy composite plates
691
Finite element simulation of low-density thermally bonded nonwoven materials: Effects of orientation distribution function and arrangement of bond points
692
Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian–Eulerian formulation Original Research Article
693
Finite element simulation of magnesium alloy sheet forming at elevated temperatures
694
Finite element simulation of magnesium alloys laser beam welding
695
Finite element simulation of magnetoconvection inside a sinusoidal corrugated enclosure with discrete isoflux heating from below
696
Finite element simulation of martensitic phase transitions in elastoplastic materials
697
Finite element simulation of martensitic transition based on thermo-mechanical model
698
Finite element simulation of mass transfer in laminar swirling decaying flow induced by means of a tangential inlet in an annulus Original Research Article
699
Finite element simulation of metal casting
700
Finite element simulation of metal forming and in-plane crack propagation using ductile continuum damage model
701
Finite element simulation of MHD combined convection through a triangular wavy channel
702
Finite element simulation of micro-imprinting in Mg–Cu–Y amorphous alloy
703
Finite element simulation of microstructure evolution during friction stir welding of automotive aluminum parts
704
Finite element simulation of mixed convection heat and mass transfer in a right triangular enclosure
705
Finite element simulation of mode I dynamic, ductile fracture initiation
706
Finite element simulation of mold filling using marker particles and the k-ϵ model of turbulence Original Research Article
707
Finite element simulation of mold filling using marker particles and the κ-ϵ model of turbulence Original Research Article
708
Finite element simulation of moldboard–soil interaction
709
Finite element simulation of multi-point sheet forming process based on implicit scheme
710
Finite element simulation of nano-indentation experiment on aluminum 1100
711
Finite element simulation of natural convection flow in a trapezoidal enclosure filled with porous medium due to uniform and non-uniform heating
712
Finite element simulation of natural convection within porous trapezoidal enclosures for various inclination angles: Effect of various wall heating
713
Finite element simulation of non-linear acoustic generation in a horn loudspeaker
714
Finite element simulation of nonlinear viscous fingering in miscible displacements with anisotropic dispersion and nonmonotonic viscosity profiles
715
Finite element simulation of Pellet-Cladding Interaction (PCI) in nuclear fuel rods
716
Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon
717
Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon
718
Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon
719
Finite element simulation of plasticity induced crack closure with different material constitutive models
720
Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model
721
Finite element simulation of polymer behaviour using a three-dimensional, finite deformation constitutive model
722
Finite element simulation of powder forming and sintering Original Research Article
723
Finite element simulation of profile rolling of wire
724
Finite element simulation of PSB macroband nucleation and propagation in single crystal nickel cycled at low plastic strain amplitudes
725
Finite element simulation of pulsed laser ablation of titanium carbide
726
Finite Element Simulation of Pyroplastic Deformation, Anisotropic Shrinkage and Heterogeneous Densification for Ceramic Materials During Liquid Phase Sintering Process
727
Finite element simulation of quench distortion in a low-alloy steel incorporating transformation kinetics Original Research Article
728
Finite element simulation of residual stress of double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings using birth and death element technique
729
Finite element simulation of residual stresses and their measurement by contour method
730
Finite element simulation of response of buried shelters to blast loadings
731
Finite element simulation of selective superplastic forming of friction stir processed 7075 Al alloy
732
Finite element simulation of shaped charges
733
Finite element simulation of single crystal growth process using GSMAC method
734
Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion
735
Finite element simulation of springback for a channel draw process with drawbead using different hardening models
736
Finite element simulation of springback for a channel draw process with drawbead using different hardening models
737
Finite element simulation of springback in sheet metal forming
738
Finite element simulation of steel ring fragmentation under radial expansion
739
Finite element simulation of stent and balloon interaction
740
Finite element simulation of straight plunge grinding for advanced ceramics
741
Finite element simulation of strain induced austenite–martensite transformation and fine grain production in stainless steel
742
Finite element simulation of strain localization with large deformation: capturing strong discontinuity using a Petrov–Galerkin multiscale formulation Original Research Article
743
Finite element simulation of stress distribution and development in 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings during thermal shock
744
Finite element simulation of surface deformation of polycrystal with a rough surface under repeated load
745
Finite element simulation of surface micro-indentation behavior of yttria stabilized zirconia thermal barrier coatings with microstructural characteristic of columnar grains and sub-grains based on a nonlinear contact model
746
Finite element simulation of tensile bond strength of atmospheric plasma spraying thermal barrier coatings
747
Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section
748
Finite element simulation of the cold forging process having a floating die
749
Finite element simulation of the cyclic behaviour of end-plate joints
750
Finite element simulation of the dynamical behavior of a speed-increase gearbox
751
Finite Element simulation of the edge-trimming/cold rolling sequence: Analysis of edge cracking
752
Finite element simulation of the effect of clearance on the forming quality in the blanking process
753
Finite element simulation of the effect of surface roughness on nanoindentation of thin films with spherical indenters
754
Finite element simulation of the effects of process parameters on deposition uniformity of chemical-vapor-deposited silicon carbide
755
Finite element simulation of the electromagnetic piercing of sheet metal
756
Finite element simulation of the filling of thin moulds
757
Finite element simulation of the Flow-Splitting-Process
758
Finite element simulation of the hip joint during stumbling: a comparison between static and dynamic loading
759
Finite element simulation of the hysteretic behaviour of an industrial rubber. Application to design of rubber components
760
Finite element simulation of the manufacturing process chain of a sheet metal assembly
761
Finite element simulation of the mechanics of flat contact pad fretting fatigue tests
762
Finite element simulation of the motion of a rigid body in a fluid with free surface Original Research Article
763
Finite element simulation of the orthogonal metal cutting process for qualitative understanding of the effects of crater wear on the chip formation process
764
Finite element simulation of the Piobert–Lüders behavior in an uniaxial tensile test
765
Finite element simulation of the Piobert–Lüders behavior in an uniaxial tensile test
766
Finite element simulation of the pressure dip in sandpiles
767
Finite element simulation of the punching/blanking process using in-process characterisation of mild steel
768
Finite element simulation of the punchless piercing process with Lemaitre damage model
769
Finite element simulation of the punchless piercing process with Lemaitre damage model
770
Finite element simulation of the punchless piercing process with Lemaitre damage model
771
Finite element simulation of the residual stresses in high strength carbon steel butt weld incorporating solid-state phase transformation
772
Finite element simulation of the rolling and extrusion of multi-phase materials Application to the rolling of prepared sugar cane Original Research Article
773
Finite element simulation of the shearing mechanism in the blanking of sheet metal
774
Finite element simulation of the simple tension test in metals
775
Finite element simulation of the steel plates hot rolling process
776
Finite element simulation of the stress distribution of equal-cross section lateral extrusion
777
Finite element simulation of the stress distribution of equal-cross section lateral extrusion
778
Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
779
Finite element simulation of the tube hydroforming process—bending, preforming and hydroforming
780
Finite element simulation of the warm deep drawing process in forming a circular cup from magnesium alloy sheet
781
Finite element simulation of the wind action over bridge sectional models: Application to the Guamل River Bridge (Parل State, Brazil)
782
Finite element simulation of thermal barrier coating performance under thermal cycling
783
Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws
784
Finite element simulation of thermoforming processes for polymer sheets Original Research Article
785
Finite element simulation of thin liquid film flow and heat transfer including a hydraulic jump
786
Finite element simulation of tip test with an aluminum alloy
787
Finite Element Simulation of Twin-Roll Casting Process with an Implementation of Slip/ Friction Boundary Condition
788
Finite Element Simulation of Twin-Roll Casting Process with an Implementation of Slip/ Friction Boundary Condition
789
Finite element simulation of twopoint incremental forming of freeform parts
790
Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction
791
Finite element simulation of wave propagation in an axisymmetric bar
792
Finite Element Simulation of Web Falling During Heavy Rail Roller Straightening
793
Finite Element Simulation on Crack Analysis of a Thick-Tube
794
Finite element simulation on mechanical and structural properties of cold-formed dimpled steel
795
Finite element simulation on strain-induced martensitic transformation effects in TRIP steel sheet forming
796
Finite element simulation on superplastic blow forming of diffusion bonded 4 sheets
797
Finite element simulation prior to reconstruction of a steel railway bridge to reduce structure-borne noise
798
Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions
799
Finite element simulation to investigate interaction between crack and particulate reinforcements in metal-matrix composites
800
Finite element simulation to investigate interaction between crack and particulate reinforcements in metal-matrix composites
801
Finite Element Simulationon Damage and Fracture Properties of a Ring Cut from Filament-Wound Pipes with and without Delamination
802
Finite element simulations of chemo-mechanical coupling in elastic–plastic homoionic expansive clays Original Research Article
803
Finite element simulations of compositionally graded InGaN solar cells
804
Finite element simulations of crack propagation in functionally graded materials under flexural loading
805
Finite element simulations of ductile rupture in a constrained metal foil
806
Finite element simulations of ductile rupture in a constrained metal foil
807
Finite element simulations of dynamics of multivariant martensitic phase transitions based on Ginzburg–Landau theory
808
Finite element simulations of dynamics of multivariant martensitic phase transitions based on Ginzburg–Landau theory
809
Finite element simulations of elasto-plastic processes in Nb3Sn strands Original Research Article
810
Finite element simulations of elasto-plastic processes in Nb3Sn strands Original Research Article
811
Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography
812
Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography
813
Finite element simulations of low-mass readout cables for the CBM Silicon Tracking System using RAPHAEL
814
Finite element simulations of low-mass readout cables for the CBM Silicon Tracking System using RAPHAEL
815
Finite element simulations of martensitic phase transitions and microstructures based on a strain softening model
816
Finite element simulations of natural convection flow in an isosceles triangular enclosure filled with a porous medium: Effects of various thermal boundary conditions
817
Finite element simulations of orthotropic hyperelasticity
818
Finite element simulations of sheet-metal forming processes for planar-anisotropic materials
819
Finite element simulations of sheet-metal forming processes for planar-anisotropic materials
820
Finite element simulations of sheet-metal forming processes for planar-anisotropic materials
821
Finite element simulations of static and sliding contact between a human fingertip and textured surfaces
822
Finite element simulations of textile composite forming including the biaxial fabric behaviour
823
Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography
824
Finite element simulations of ultrasonically assisted turning
825
Finite element simulations on the mechanical properties of MHS materials
826
Finite element simulations using symbolic computing Original Research Article
827
Finite element sintering analysis of metal injection molded copper brown body using thermo-physical data and kinetics
828
Finite element solution for flow of a third grade fluid past a horizontal porous plate with partial slip
829
Finite element solution for intermittent-contact problem with piezoelectric actuation in ring type USM
830
Finite element solution for the continuum traffic equilibrium problems
831
Finite element solution of a membrane covered electrode problem
832
FINITE ELEMENT SOLUTION OF A MODEL FREE SURFACE PROBLEM BY THE OPTIMAL SHAPE DESIGN APPROACH
833
Finite element solution of a Reynolds–Koiter coupled problem for the elastic journal–bearing Original Research Article
834
Finite element solution of compressible viscous flows using conservative variables Original Research Article
835
Finite element solution of Dirichletʹs nonlinear partial differential equation with mixed boundary conditions Original Research Article
836
Finite element solution of electromagnetic problems over a wide frequency range via the Padé approximation Original Research Article
837
Finite element solution of free-surface ship-wave problems
838
Finite Element Solution of Heat and Mass Transfer in MHD Flow of a Viscous Fluid past a Vertical Plate under Oscillatory Suction Velocity
839
Finite Element Solution of Heat and Mass Transfer in MHD Flow of a Viscous Fluid past a Vertical Plate under Oscillatory Suction Velocity
840
FINITE ELEMENT SOLUTION OF INCOMPRESSIBLE FLUID-STRUCTURE VIBRATION PROBLEMS
841
Finite Element Solution of MHD Transient Flow past an Impulsively Started Infinite Horizontal Porous Plate in a Rotating Fluid with Hall Current
842
Finite Element Solution of MHD Transient Flow past an Impulsively Started Infinite Horizontal Porous Plate in a Rotating Fluid with Hall Current
843
Finite element solution of new displacement/pressure poroelastic models in acoustics Original Research Article
844
Finite element solution of nonlinear eddy current problems with periodic excitation and its industrial applications
845
Finite element solution of radiative transfer across a slab with variable spatial refractive index
846
Finite element solution of surface-tension driven flows in laser surface-melting
847
Finite element solution of the 3D mold filling problem for viscous incompressible fluid Original Research Article
848
Finite element solution of the Helmholtz equation with high wave number Part I: The h-version of the FEM
849
Finite element solution of the Navier-Stokes equations for incompressible flow using a segregated algorithm Original Research Article
850
Finite element solution of the stability problem for nonlinear undamped and damped systems under nonconservative loading
851
Finite element solution of the Stokes problem with dominating Coriolis force Original Research Article
852
Finite element solutions for optimal square plates
853
Finite element solutions for optimal square plates
854
Finite element solutions for optimal square plates
855
Finite element solutions for plane strain mode I crack with strain gradient effects
856
Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods
857
Finite element solutions of heat transfer in molten polymer flow in tubes with viscous dissipation
858
FINITE ELEMENT SOLUTIONS WITH FEEDBACK NETWORK MECHANISM THROUGH DIRECT MINIMIZATION OF ENERGY FUNCTIONALS
859
Finite element spherical harmonics (PN) solutions of the three-dimensional Takeda benchmark problems
860
Finite element stabilization parameters computed from element matrices and vectors Original Research Article
861
Finite element stress analysis and strength evaluation of epoxy-steel cylinders subjected to impact push-off loads
862
Finite element stress analysis of a reinforced high-strength concrete column in severe fires
863
Finite element stress analysis of left ventricular mechanics in the beating dog heart
864
FINITE ELEMENT STRESS ANALYSIS ON NATURAL GAS MOTORCYCLE INTAKE MANIFOLD
865
FINITE ELEMENT STRESS EXTRACTION BY THE COMPLEMENTARY ENERGY PRINCIPLE
866
Finite Element Studies of Asphalt Concrete Pavement Reinforced with Geogrid
867
Finite Element Studies on Friction Stir Welding Processes of Polyethylene Plates
868
Finite element studies on friction stir welding processes of tailored blanks
869
Finite Element studies on indentation size effect using a higher order strain gradient theory
870
Finite element study of a wrist prosthesis
871
Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading
872
Finite element study of composite cuff connections for pultruded box sections
873
Finite element study of compressively loaded fibres fractured during impact
874
Finite element study of high-speed blunt impact on thorax: linear elastic considerations
875
Finite element study of mixed convection for non-Newtonian fluid between two coaxial rotating cylinders
876
Finite element study of multi-modal vibration damping for thermal barrier coating applications
877
Finite element study of nonlinear two-dimensional deoxygenated biomagnetic micropolar flow
878
Finite element study of steel beams reinforced while under load
879
Finite element study of steel single angle beam–columns
880
Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs Original Research Article
881
Finite element study of the energy dissipation and residual stresses in the closed elastic deformation path
882
Finite element study of the Lorentz model in metamaterials
883
Finite element study of trochanteric gamma nail for trochanteric fracture
884
FINITE ELEMENT SURFACE MODEL FOR FLOW AROUND VERTICAL WALL ABUTMENTS
885
Finite element synthesis of structural or acoustic receptances in view of practical design applications
886
Finite element technique for design of stub columns
887
Finite element techniques for dynamic crack analysis in piezoelectrics
888
Finite element techniques for the free-vibration and seismic analysis of liquid-storage tanks
889
Finite element techniques for wind engineering
890
Finite element techniques for wind engineering
891
Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 1: Beam concept and geometrically exact nonlinear formulation Original Research Article
892
Finite element theory for curved and twisted beams based on exact solutions for three-dimensional solids Part 2: Anisotropic and advanced beam models Original Research Article
893
Finite element thermal analysis of special building components
894
FINITE ELEMENT TRANSIENT DYNAMIC ANALYSIS OF LAMINATED STIFFENED SHELLS
895
Finite element treatment of two-dimensional thermoelastic wear problems Original Research Article
896
Finite element tree crown hydrodynamics model (FETCH) using porous media flow within branching elements: A new representation of tree hydrodynamics
897
Finite element variational formulation for beams with discontinuities
898
Finite element verification in the case of missing data
899
Finite element vibration analysis of a partially covered cantilever beam with concentrated tip mass
900
Finite element vibration analysis of beams, plates and shells A bibliography (1994-1998)
901
Finite element vibration analysis of beams, plates and shells A bibliography (1994-1998)
902
Finite element vibration analysis of composite box structures using the high order plate theory
903
Finite element vibration analysis of laminated composite folded plate structures
904
Finite element vibration analysis of laminated composite folded plate structures
905
FINITE ELEMENT VIBRATION ANALYSIS OF ROTATING TIMOSHENKO BEAMS
906
Finite element wavelets with improved quantitative properties
907
Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations
908
Finite element/boundary element analysis of viscoelastic and viscoplastic problems a bibliography (1994–1996)
909
Finite element/volume solution to axisymmetric conservation laws
910
Finite elementanalysis of dovetail joint made with the use of CNC technology
911
Finite Element-Based Algorithms to Make Cuts for Magnetic Scalar Potentials: Topological Constraints and Computational Complexity
912
Finite element-based analysis of shunted piezoelectric structures for vibration damping
913
Finite element-based approach to modeling heterogeneous objects
914
Finite element-based fatigue behaviour of springs in automobile suspension
915
Finite element-based force identification of sliding support systems: Part II—Numerical investigation
916
Finite element-based force identification of sliding support systems: Part I—Theory
917
Finite element-based multi-phase modelling of shape memory polymer stents
918
Finite element-based simulation of a metal hydride-based hydrogen storage tank
919
Finite Element-Based Structural Reliability Assessment Using Efficient Directional Simulation
920
Finite element-based three-dimensional stress analysis of composite bonded repairs to metallic aircraft structure
921
FINITE ELEMENT-BASED VIBRATION ANALYSIS OF WWER-440 REACTORS
922
Finite element–boundary integral methods in electromagnetics
923
Finite elements analysis of heteroepitaxial SiGe layers grown by excimer laser
924
Finite Elements Analysis of the Hyperelastic Impeller Rotating in the Self-Priming Pump
925
Finite elements and object-oriented implementation techniques in computational fluid dynamics Original Research Article
926
Finite elements based on a first-order shear deformation moderate rotation shell theory with applications to the analysis of composite structures
927
Finite elements computation for the elastic properties of a regular stacking of hollow spheres
928
Finite elements computation for the elastic properties of a regular stacking of hollow spheres
929
Finite elements computation for the elastic properties of a regular stacking of hollow spheres
930
Finite elements for 2D problems of pressurized membranes
931
Finite elements for cohesive-frictional material
932
Finite elements for elasticity with microstructure and gradient elasticity
933
Finite elements for elliptic problems with stochastic coefficients Original Research Article
934
Finite elements for elliptic problems with wild coefficients Original Research Article
935
Finite elements for fluid–structure interaction in ALE and fully Eulerian coordinates
936
Finite elements for functionally graded Reissner–Mindlin plates Original Research Article
937
Finite elements for materials with strain gradient effects
938
Finite elements for stochastic media problems Original Research Article
939
FINITE ELEMENTS FOR THREE-MODE INTERACTION IN BUCKLING ANALYSIS
940
Finite elements in fluids: Special methods and enhanced solution techniques
941
Finite elements in fluids: Stabilized formulations and moving boundaries and interfaces
942
Finite elements in space and time for generalized viscoelastic maxwell model
943
Finite elements in space and time for parallel computing of viscoelastic deformation
944
Finite elements in task-level animation
945
Finite elements modelling of scattering problems for flexural waves in thin plates: Application to elliptic invisibility cloaks, rotators and the mirage effect
946
Finite elements numerical solution of a coupled profile–velocity–temperature shallow ice sheet approximation model
947
Finite Elements on Dyadic Grids with Applications Original Research Article
948
Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality
949
Finite elements solutions to magnetostriction.: I. Harmonic modelling
950
Finite elements solutions to magnetostriction.: II. Transient and non-linear modelling
951
Finite elements using absolute nodal coordinates for large-deformation flexible multibody dynamics
952
Finite elements with embedded branching
953
Finite elements with embedded displacement discontinuity: a generalized variable formulation
954
Finite elements with embedded strong discontinuities for the modeling of failure in solids
955
Finite elements, genetic algorithms and (beta)-splines: a combined technique for shape optimization
956
Finite elements, genetic algorithms and (beta)-splines: a combined technique for shape optimization
957
Finite elements: Their design and performance : by Richard H. MacNeal, Marcel Decker, New York, 1993
958
Finite energy solutions in three-dimensional heterotic string theory Original Research Article
959
Finite Energy Solutions of Maxwellʹs Equations and Constructive Hodge Decompositions on Nonsmooth Riemannian Manifolds
960
Finite energy sum rule determination of the scalar meson decay constants and the nature of the a0(980) Original Research Article
961
Finite Energy Sum Rules in Potential Scattering
962
Finite escapes and convergence properties of guaranteed-cost robust filters
963
Finite Euclidean graphs and Ramanujan graphs
964
Finite euclidean ramsey theory
965
Finite Eulerian posets which are binomial, Sheffer or triangular
966
Finite exchangeability and linear regression
967
Finite expiry Russian options
968
Finite extension across the South Vietnam basins from 3D gravimetric modelling: relation to South China Sea kinematics
969
Finite extensions of A-solvable abelian groups
970
Finite extinction and null controllability via delayed feedback non-local actions Original Research Article
971
Finite extinction time for nonlinear parabolic equations with nonlinear mixed boundary data Original Research Article
972
Finite extinction time for nonlinear parabolic equations with nonlinear mixed boundary data: [Nonlinear Anal. 31 (1998) 1–13]
973
Finite factorization equations and sum rules for BPS correlators in N=4 SYM theory Original Research Article
974
Finite Fault Modeling in a Tsunami Warning Center Context
975
Finite fermion density effects on the electroweak string
976
Finite field arithmetic using quasi-normal bases
977
Finite field multiplier using redundant representation
978
Finite Field Towers: Iterated Presentation and Complexity of Arithmetic,
979
Finite field-dependent symmetries in perturbative quantum gravity Original Research Article
980
Finite Fields and Ramanujan Graphs
981
Finite Fields, Root Systems, and Orbit Numbers of Chevalley Groups
982
Finite fields; Irreducible polynomials
983
Finite flag-transitive projective planes: a survey and some remarks Original Research Article
984
Finite foliations and similarity interval exchange maps
985
Finite form of the quintuple product identity
986
Finite formation time effects in inclusive and semi-inclusive electro-disintegration of few-body nuclei Original Research Article
987
Finite formulation and domain-integrated field relations in electromagnetics - a synthesis
988
Finite Formulation of the Electromagnetic Field
989
Finite Fourier Probability Distribution and Applications
990
Finite Fourier Probability Distribution and Applications
991
Finite Fourier transforms computed by a modified Filon–Euler–Maclaurin method Original Research Article
992
Finite fractal dimension of pullback attractors for non-autonomous 2D Navier–Stokes equations in some unbounded domains Original Research Article
993
Finite fractal dimension of the global attractor for a class of non-Newtonian fluids Original Research Article
994
Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension
995
Finite fracture mechanics analysis using the scaled boundary finite element method
996
Finite Fracture Mechanics at elastic interfaces
997
Finite Fracture Mechanics model for mixed mode fracture in adhesive joints
998
Finite fracture mechanics: A coupled stress and energy failure criterion
999
Finite free generating sets Original Research Article
1000
Finite frequency phonon effects in spin-Peierls systems
