<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Surface forces arising from adsorbed hydrolysis products of metal ions in ZrO2 and silica dispersions: Cu(II), Ni(II), Co(II) and Al(III)
2
Surface forces between mica surfaces confining inorganic nanoparticle dispersions and frictional properties
3
Surface Forces Driven Wrinkling of an Elastic Half-Space Coated with a Thin Stiff Surface Layer
4
Surface forces in foam films from DPPC and lung surfactant phospholipid fraction
5
Surface forces in model oil-in-water emulsions stabilized by proteins
6
Surface forces in wetting films
7
Surface forces measured between an air bubble and a solid surface in water
8
Surface forces measured in sugar surfactant solutions between two hydrophobic thiolated silica spheres
9
Surface forces vs. surface compositions. Colloid science from the Gibbs adsorption perspective
10
Surface fractal analysis of pore structure of high-volume fly-ash cement pastes
11
Surface fractal dimension of bentonite and its application to determination of swelling properties
12
Surface fractal dimension of graphitized carbon black particles Original Research Article
13
Surface fractal dimension: An indicator to characterize the microstructure of cement-based porous materials
14
Surface fractal dimensions and textural properties of mesoporous alkaline-earth hydroxyapatites
15
Surface fracture of glassy materials as detected by real-time atomic force microscopy (AFM) experiments
16
Surface free energies of electroless Ni–P based composite coatings
17
Surface free energy (γsd) of active carbons determined by inverse gas chromatography: influences of the origin of precursors, the burn off level and the chemical modification
18
Surface free energy analysis of adsorbents used for radioiodine adsorption
19
Surface free energy and its effect on the elastic behavior of nano-sized particles, wires and films
20
Surface free energy and optimizing time about hydrophobic coating of multi-walled carbon nanotubes under low pressure by glow plasma with toluene
21
Surface free energy and topography of mixed lipid layers on mica
22
Surface free energy and wettability of silyl layers on silicon determined from contact angle hysteresis
23
Surface free energy characterization and adhesion performance of mild steel treated based on zirconium conversion coating: A comparative study
24
Surface free energy evaluation of well-ordered Langmuir–Blodgett surfaces: Comparison of different approaches
25
Surface free energy modification of CaF by atomic-height island 2 formation on heteroepitaxy of GaAs on CaF2
26
Surface free energy of a solid from contact angle hysteresis
27
Surface free energy of carbon fibers with circular and non-circular cross sections coated with silicon carbide Original Research Article
28
Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering
29
Surface free energy of non-stick coatings deposited using closed field unbalanced magnetron sputter ion plating
30
Surface free energy of platinum nanoparticles at zero pressure: A molecular dynamic study
31
Surface free energy of polypropylene and polycarbonate solidifying at different solid surfaces
32
Surface free energy of ultra-high molecular weight polyethylene modified by electron and gamma irradiation
33
Surface free energy––a possible source of error in nanohardness?
34
Surface freezing in a liquid eutectic Ga–Bi alloy
35
Surface friction of gellan gels
36
Surface friction of polymer gels
37
Surface friction of polymer gels: 1. Effect of interfacial interaction
38
Surface friction of polymer gels: 2. Effect of charge
39
Surface frontogenesis and thermohaline intrusion in a shelfbreak front
40
Surface functional groups of carbons and the effects of their chemical character, density and accessibility to ions on electrochemical performance Original Research Article
41
Surface functional groups on acid-activated nutshell carbons Original Research Article
42
Surface functionalisation of bacterial cellulose as the route to produce green polylactide nanocomposites with improved properties
43
Surface functionalisation of carbon nano-fibres in fluidised bed plasma
44
Surface functionalisation of cellulose with noble metals nanoparticles through a selective nucleation
45
Surface functionalisation of polymer nanofibres by sputter coating of titanium dioxide
46
Surface functionalisation of polypyrrole films using UV light induced radical activation
47
Surface functionalisation of sol–gel derived aluminosilicates in simulated body fluids
48
Surface functionalities of multi-wall carbon nanotubes after UV/Ozone and TETA treatments Original Research Article
49
Surface functionality and porosity of activated carbons obtained from chemical activation of wood Original Research Article
50
Surface functionality enhancement for on-chip human embryonic stem cell culture
51
Surface functionalization and characterization of graphitic carbon nanofibers (GCNFs) Original Research Article
52
Surface functionalization by low-energy electron processing of molecular ices
53
Surface functionalization by poly-acrylic acid plasma-polymerized films for microarray DNA diagnostics
54
Surface functionalization effects on structural, conformational, and optical properties of polyaniline nanofibers
55
Surface functionalization effects on structural, conformational, and optical properties of polyaniline nanofibers
56
Surface functionalization for dispersing and stabilizing hexagonal boron nitride nanoparticle by bead milling
57
Surface functionalization for self-referencing surface plasmon resonance (SPR) biosensors by multi-step self-assembly
58
Surface functionalization of 3D glass–ceramic porous scaffolds for enhanced mineralization in vitro
59
Surface functionalization of Ag-nanoclusters–silica composite films for biosensing
60
Surface functionalization of bioactive glasses with natural molecules of biological significance, Part I: Gallic acid as model molecule
61
Surface functionalization of bioactive glasses with natural molecules of biological significance, part II: Grafting of polyphenols extracted from grape skin
62
Surface functionalization of Bioglass®-derived porous scaffolds
63
Surface functionalization of cellulose by grafting oligoether chains
64
Surface functionalization of cellulose fibers with titanium dioxide nanoparticles and their combined bactericidal activities
65
Surface functionalization of cellulose fibres and their incorporation in renewable polymeric matrices
66
Surface functionalization of degradable polymers by covalent grafting
67
Surface functionalization of ferrocene based ionic liquid onto carbon surface using stepwise grafting
68
Surface functionalization of graphite and carbon nanotubes by vacuum-ultraviolet photochemical reactions
69
Surface functionalization of hexagonal boron nitride and its effect on the structure and performance of composites
70
Surface functionalization of mesoporous antimony doped tin oxide by metalorganic reaction
71
Surface functionalization of micro silver flakes and their application in electrically conductive adhesives for electronic package
72
Surface functionalization of nanodiamond particles via atom transfer radical polymerization Original Research Article
73
Surface functionalization of nanoporous alumina with bone morphogenetic protein 2 for inducing osteogenic differentiation of mesenchymal stem cells
74
Surface functionalization of nanostructured silver-coated polyester fabric by magnetron sputtering
75
Surface functionalization of PEEK films using photochemical routes
76
Surface functionalization of phosphazenenanosphere derivatives by Schiff-base-assisted metal complexes through a Si-spacer
77
Surface functionalization of poly(d,l-lactic acid) nanoparticles with poly(ethylenimine) and plasmid DNA by the layer-by-layer approach
78
Surface functionalization of polyethylene via covalent immobilization of O-stearoyl-chitosan
79
Surface functionalization of porous ZrO2–TiO2 membranes using γ-aminopropyltriethoxysilane in palladium electroless deposition
80
Surface functionalization of PTFE membranes with hyperbranched poly(amidoamine) for the removal of Cu2+ ions from aqueous solution
81
Surface functionalization of PTFE sheet through atmospheric pressure plasma liquid deposition approach
82
Surface functionalization of radiopaque Ta2O5/SiO2
83
Surface functionalization of SBA-15-ordered mesoporous silicas: Oxidation of benzene to phenol by nitrous oxide
84
Surface functionalization of silk fabric by PTFE sputter coating
85
Surface functionalization of single-walled carbon nanotubes using photolysis for enhanced dispersion in an organic solvent
86
Surface functionalization of single-walled carbon nanotubes using photolysis for enhanced dispersion in an organic solvent
87
Surface functionalization of styrenic block copolymer elastomeric biomaterials with hyaluronic acid via a “grafting to” strategy
88
Surface functionalization of titanium substrates with cecropin B to improve their cytocompatibility and reduce inflammation responses
89
Surface functionalization of titanium substrates with chitosan–lauric acid conjugate to enhance osteoblasts functions and inhibit bacteria adhesion
90
Surface functionalization of titanium with hyaluronic acid/chitosan polyelectrolyte multilayers and RGD for promoting osteoblast functions and inhibiting bacterial adhesion
91
Surface functionalization of unsized carbon fiber using nitrenes derived from organic azides Original Research Article
92
Surface functionalization of vertically-aligned carbon nanotube forests by radio-frequency Ar/O2 plasma Original Research Article
93
Surface functionalization of viscose and polyester fabrics toward antibacterial and coloration properties
94
Surface functionalization studies and direct laser printing of oligonucleotides toward the fabrication of a micromembrane DNA capacitive biosensor
95
Surface functionalization without lattice degradation of highly crystalline nanoscaled carbon materials using a carbon monoxide atmospheric plasma treatment Original Research Article
96
Surface functionalization, morphology and thermal properties of polyamide6/O-MMT composite nanofibers by Fe2O3 sputter coating
97
Surface functionalization-enhanced spillover effect on hydrogen storage of Ni–B nanoalloy-doped activated carbon
98
Surface functionalized microfiltration membranes for affinity separation Original Research Article
99
Surface functionalized titanium thin films: Zeta-potential, protein adsorption and cell proliferation
100
Surface GARField: a novel one-sided NMR magnet and RF probe
101
Surface generating process of artificial hip joints with hyper-hemispherical shape having higher smoothness and biocompatibility
102
Surface generation and boundary lubrication in bulk forming of aluminium alloy
103
Surface generation of color centers in lithium fluoride by EUV-irradiation
104
Surface generation of superior hydrophilicity for surgical steels by specific grinding parameters
105
Surface Generation with Engineered Diamond Grinding Wheels: Insights from Simulation
106
Surface geochemical data evaluation and integration with geophysical observations for hydrocarbon prospecting, Tapti graben, Deccan Syneclise, India
107
Surface geochemical exploration for hydrocarbons in the area of prospective structures of the Lublin Trough (Eastern Poland)
108
Surface geochemistry of soils associated to the Tinto River (Huelva, Spain)
109
Surface geometrical model modification and contact angle prediction for the laser patterned steel surface
110
Surface geometry and STM image of the Sn/Ge(1 1 1)-3×3 reconstruction
111
Surface geometry and STM image of the Sn/Ge(1 1 1)-3×3 reconstruction
112
Surface geometry and strain energy effects in the failure of a (Ni, Pt)Al/EB-PVD thermal barrier coating Original Research Article
113
Surface geometry influences the shape of illusory contours
114
Surface geometry of GaAs(001) surface Ga-rich phases grown by molecular beam epitaxy
115
Surface geometry of GaAs(001) surface Ga-rich phases grown by molecular beam epitaxy
116
Surface geometry of pure iridium oxidized at 1373 K in air
117
Surface geometry of slide bearings after percussive burnishing
118
Surface geomorphology of Jupiter Family Comets: A geologic process perspective
119
Surface geostrophic currents across the Antarctic circumpolar current in Drake Passage from 1992 to 2004
120
Surface Gibbs free energy of minerals: some values
121
Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry
122
Surface glycosylation of polyacrylonitrile ultrafiltration membrane to improve its anti-fouling performance
123
Surface graft copolymerization of acrylic acid onto LDPE film through corona discharge
124
Surface graft copolymerization of hydrogen silicone fluid onto fabric through corona discharge and water repellency of grafted fabric
125
Surface grafting control of PEGylated poly(vinylidene fluoride) antifouling membrane via surface-initiated radical graft copolymerization
126
Surface grafting density analysis of high anti-clotting PU-Si-g-P(MPC) films
127
Surface grafting of a thermoplastic polyurethane with methacrylic acid by previous plasma surface activation and by ultraviolet irradiation to reduce cell adhesion
128
Surface grafting of a π-conjugated amino-ferrocifen drug
129
Surface grafting of carboxylic groups onto thermoplastic polyurethanes to reduce cell adhesion
130
Surface grafting of cellulose nanocrystals with poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
131
Surface grafting of Corchorus olitorius fibre: A green approach for the development of activated bioadsorbent
132
Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization
133
Surface grafting of fluorescent carbon nanoparticles with polystyrene via atom transfer radical polymerization
134
Surface grafting of microfibrillated cellulose with poly(ε-caprolactone) – Synthesis and characterization
135
Surface grafting polymerization and modification on poly(tetrafluoroethylene) films by means of ozone treatment
136
Surface grain boundary engineering of shot-peened type 304 stainless steel
137
Surface grain structure development during indirect extrusion of 6xxx aluminum alloys
138
Surface grain structure evolution in hot rolling of 6061 aluminum alloy
139
Surface graphitization analysis of cerium-polished HFCVD diamond films with micro-raman spectra
140
Surface graphitization and mechanical properties of hot-pressed bulk carbon nanotubes compacted by spark plasma sintering Original Research Article
141
Surface graphitization of Furan-resin-derived carbon Original Research Article
142
Surface gravity wave effects on the upper ocean boundary layer: Modification of a one-dimensional vertical mixing model
143
Surface gravity waves in deep fluid at vertical shear flows
144
Surface Green function for a soft elastic half-space: Influence of surface stress
145
Surface Greenʹs Function of the Helmholtz Equation in Spherical Coordinates
146
Surface grinding of carbon fiber reinforced plastic (CFRP) with an internal coolant supplied through grinding wheel
147
Surface ground contamination and soil vertical distribution of 137Cs around two underground nuclear explosion sites in the Asian Arctic, Russia
148
SURFACE GROUND VIBRATION DUE TO A MOVING TRAIN IN A TUNNEL: TWO-DIMENSIONAL MODEL
149
Surface groups in some surgered manifolds
150
SURFACE GROUPS INSIDE MAPPING CLASS GROUPS
151
Surface Growth of a Motile Bacterial Population Resembles Growth in a Chemostat
152
Surface growth of binary Eden model at percolation threshold concentration
153
Surface growth of single-walled carbon nanotubes from ruthenium nanoparticles
154
Surface guided waves in two-dimensional phononic crystals
155
Surface hardening of age-hardenable Cu–Ti dilute alloys by plasma nitriding
156
Surface hardening of AISI 4340 steel by machining: a preliminary investigation
157
Surface hardening of aluminum alloy by shot peening treatment with Zn based ball
158
Surface hardening of biomedical Ti–29Nb–13Ta–4.6Zr and Ti–6Al–4V ELI by gas nitriding
159
Surface hardening of ductile cast iron using stainless steel
160
Surface hardening of ductile cast iron using stainless steel
161
Surface hardening of IF steel by plasma nitriding: Effect of a shot peening pre-treatment
162
Surface hardening of metallic alloys by electrospark deposition followed by plasma nitriding
163
Surface hardening of railroad wheels.
164
Surface hardening of shot peened H13 steel by enhanced nitrogen diffusion
165
Surface hardening of steel by plasma-electrolysis boronizing
166
Surface hardening of steel using a high power diode laser
167
Surface hardening of steels with carbon by non-vacuum electron-beam processing
168
Surface hardening of titanium by pulsed Nd:YAG laser irradiation at 1064- and 532-nm wavelengths in nitrogen atmosphere
169
SURFACE HARDENING OF TUNGSTEN-BASED HEAVY ALLOY VIA PACKBORONIZING
170
Surface hardness change of restorative filling materials stored in saliva
171
Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters
172
Surface hardness improvement of plasma-sprayed AISI 316L stainless steel coating by low-temperature plasma carburizing
173
Surface heat budget on green roof and high reflection roof for mitigation of urban heat island
174
Surface heat flow and CO2 emissions within the Ohaaki hydrothermal field, Taupo Volcanic Zone, New Zealand
175
Surface heat flow density at the phlegrean fields caldera (SOUTHERN ITALY)
176
Surface heat flux in the Gulf of Maine
177
Surface heat fluxes and subsurface heat content at a site over the southeastern Bering Sea shelf, May–July 1996
178
Surface heat fluxes and thermohaline variability in the Ross Sea and in Terra Nova Bay polynya
179
Surface heat fluxes influence on medicane trajectories and intensification
180
Surface heat transfer coefficients to stationary spherical particles in an experimental unit for hydrofluidisation freezing of individual foods
181
Surface heat transfer due to sliding bubble motion
182
Surface heat-flux fluctuations in a turbulent channel flow up to Reτ=1020 with Pr=0.025 and 0.71
183
Surface heating and three-dimensional motion of a thermoelastic beam
184
Surface height adjustments in pyroclastic-flow deposits observed at Unzen volcano by JERS-1 SAR interferometry
185
Surface heterogeneity and ionization of Cs promoter in carbon-based ruthenium catalyst for ammonia synthesis
186
Surface heterogeneity and its signature in higher-order scalar similarity relationships
187
Surface heterogeneity and surface area from linear inverse gas chromatography: Application to glass fibers
188
Surface heterogeneity and the spatial variation of fluxes
189
Surface heterogeneity effects of activated carbons on the kinetics of paracetamol removal from aqueous solution
190
Surface heterogeneity of a fluorinated block copolymer melt studied by a self-consistent-field analysis
191
Surface heterogeneity of carbon–silica adsorbents studied on the basis of the complex adsorption investigations
192
Surface heterogeneity of minerals
193
Surface heterogeneity of polysiloxane xerogels functionalized by 3-aminopropyl groups
194
Surface Heterogeneity of Six Commercial Brands of End-Capped C18-Bonded Silica. RPLC Separations
195
Surface hoar characteristics derived from a snow micropenetrometer using moving window statistical operations
196
Surface holography with LEED electrons
197
Surface homeomorphisms with zero-dimensional singular set
198
Surface hopping and fully quantum dynamical wavepacket propagation on multiple coupled adiabatic potential surfaces for proton transfer reactions
199
Surface hot-shortness of 1045 forging steel with residual copper
200
Surface hydration and nanoindentation of silicate glasses
201
Surface hydration: Principles and applications toward low-fouling/nonfouling biomaterials
202
Surface hydration-mediated conduction of NiO nanocrystals
203
Surface hydride composition of plasma deposited hydrogenated amorphous silicon: in situ infrared study of ion flux and temperature dependence
204
Surface hydrogen densities of variously treated CVD diamond surfaces
205
Surface hydrology of low-relief landscapes: Assessing surface water flow impedance using LIDAR-derived digital elevation models
206
Surface hydrophilic imprinted particles via a green precipitation polymerization for selective removal of tetracycline from aqueous solution
207
Surface hydrophilic modification of polyethersulfone membranes by surface-initiated ATRP with enhanced blood compatibility
208
Surface hydrophilic modification of RO membranes by plasma polymerization for low organic fouling
209
Surface hydrophilic modification with a sugar moiety for a uniform-sized polymer molecularly imprinted for phenobarbital in serum
210
Surface hydrophilic treatment of polyurea film realized by vacuum ultraviolet light irradiation and its application for poly(methylmethacrylate) blood analysis chip
211
Surface hydrophilic–hydrophobic property on transparent mesoporous silica thin films containing chromium oxide single-site photocatalyst
212
Surface hydrophilicity of PLGA fibers governs in vitro mineralization and osteogenic differentiation
213
Surface hydrophilization for polypropylene microporous membranes: A facile interfacial crosslinking approach
214
Surface hydrophilization of electrospun PLGA micro-/nano-fibers by blending with Pluronic® F-108
215
Surface hydrophilization of microporous polypropylene membrane by grafting zwitterionic polymer for anti-biofouling
216
Surface hydrophilization of microporous polypropylene membrane by the interfacial crosslinking of polyethylenimine
217
Surface hydrophobic amino acid residues in cellulase molecules as a structural factor responsible for their high denim-washing performance
218
Surface hydrophobic modification of ultra-fine aluminum silicate by mechanically grinding and heating
219
Surface hydrophobicity of commercial canola proteins mixed with κ-carrageenan or guar gum
220
Surface hydrophobicity of petroleum hydrocarbon degrading Burkholderia strains and their interactions with NAPLs and surfaces
221
Surface hydroxyl concentration on Zr(OH)4 quantified by 1H MAS NMR
222
Surface hydroxyl groups direct cellular response on amorphous and anatase TiO2 nanodots
223
Surface hydroxylation of TiO2 yields notable visible-light photocatalytic activity to decompose rhodamine B in aqueous solution Original Research Article
224
Surface hydroxyls in porous silica: a Raman spectroscopy study
225
Surface ignition behaviors of methane–air mixture in a gas oven burner
226
Surface Ignition using ethanol on Mo and Al2O3-TiO2 coated in CI engine for environmental benefits
227
Surface imaging of fragile materials with hydrophobic atomic force microscope tips
228
Surface imaging of stellar non-radial pulsations I. Inversions of simulated data
229
Surface imaging of stellar non-radial pulsations II. The (beta) Cephei star (omega) Sco
230
Surface immobilization of active vancomycin on calcium aluminum oxide
231
Surface immobilization of active vascular endothelial growth factor via a cysteine-containing tag
232
Surface immobilization of an organo-iridium complex through a carbon–metal bond
233
Surface immobilization of antibody on silk fibroin through conformational transition
234
Surface immobilization of biocompatible phospholipid polymer multilayered hydrogel on titanium alloy
235
Surface immobilization of bone morphogenetic protein 2 via a self-assembled monolayer formation induces cell differentiation
236
Surface immobilization of chondroitin 6-sulfate/heparin multilayer on stainless steel for developing drug-eluting coronary stents
237
Surface immobilization of neural adhesion molecule L1 for improving the biocompatibility of chronic neural probes: In vitro characterization
238
Surface immobilization of perfluorinated acrylate copolymers by self-crosslinking
239
Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance
240
Surface immobilized bisphosphonate improves stainless-steel screw fixation in rats
241
Surface immobilized optical probes: pyrene molecules covalently attached to silica and indium-doped tin oxide
242
Surface impact analysis in shot peening process
243
Surface impact induced shattering of C6. Detection of small Cm fragments by negative surface ionization
244
Surface impedance in the antiferromagnetic and superconducting states of underdoped BaFe1.93Ni0.07As2 crystals
245
Surface impedance of BaFe2−xNixAs2 crystals
246
Surface impedance of single crystals of high Tc cuprates as a function of magnetic field
247
Surface impedance studies on the electrodynamical response of organic superconductors
248
Surface Impedance Tensor and Green’s Function for Weakly Anisotropic Elastic Materials
249
Surface Impedance Tensors of Textured Polycrystals
250
Surface impedance tomography for Antarctic sea ice
251
Surface impregnation combustion method to prepare nanostructured metallic catalysts without further reduction: As-burnt Cu–ZnO/SiO2 catalyst for low-temperature methanol synthesis
252
Surface imprinted macroporous film for high performance protein recognition in combination with quartz crystal microbalance
253
Surface imprinted polyurethane film as a chiral discriminator
254
Surface imprinted thin polymer film systems with selective recognition for bovine serum albumin Original Research Article
255
Surface imprinting on nano-TiO2 as sacrificial material for the preparation of hollow chlorogenic acid imprinted polymer and its recognition behavior
256
Surface improvement and biocompatibility of TiAl24Nb10 intermetallic alloy using rf plasma nitriding
257
Surface improvement of shafts by the deep ball-burnishing technique
258
Surface improvements of industrial components treated by plasma immersion ion implantation (PIII): results and prospects
259
Surface induced background in CUORE
260
Surface induced background in CUORE
261
Surface induced dissociation of HD2+ – a non-statistical behavior in the H+ and D+ fragmentation channels
262
Surface induced molecular dynamics of thin lipid films confined to submicron cavities: A 1H multiple-quantum NMR study
263
Surface induced nucleation of the helifan phase
264
Surface induced nucleation of the helifan phase
265
Surface induced order and dynamic heterogeneity in ultra thin polymer films: A 1H multiple-quantum NMR study
266
Surface infrared spectroscopy
267
Surface initiated ATRP in the synthesis of iron oxide/polystyrene core/shell nanoparticles
268
Surface initiated graft polymerization from carbon-doped TiO2 nanoparticles under sunlight illumination
269
Surface initiated polydopamine grafted poly([2-(methacryoyloxy)ethyl]trimethylammonium chloride) coatings to produce reverse osmosis desalination membranes with anti-biofouling properties
270
Surface initiated ring-opening polymerization of l-proline N-carboxy anhydride from single and multi walled carbon nanotubes
271
Surface initiated rolling contact fatigue based on the asperity point load mechanism—A parameter study
272
Surface initiated tooth flank damage. Part II: Prediction of micropitting initiation and mass loss
273
Surface initiated tooth flank damage: Part I: Numerical model
274
Surface instabilities during straining of anisotropic materials
275
Surface instabilities during straining of anisotropic materials
276
SURFACE INSTABILITIES IN COMPRESSED OR BENT RUBBER BLOCKS
277
SURFACE INSTABILITIES IN COMPRESSED OR BENT RUBBER BLOCKS
278
Surface instabilities in granular matter and ion-sputtered surfaces
279
Surface instability and primary atomization characteristics of straight liquid jet sprays
280
Surface instability in gradient elasticity with surface energy
281
Surface instability of a swollen cylinder hydrogel
282
Surface Instability of Laminated Coatings upon Inelastic Deformation
283
Surface instability, ripple formation, and spontaneous transition to chains of dots by competing kinetics
284
Surface integral determination of built-in electric fields and analysis of exciton binding energies in nitride-based quantum dots
285
SURFACE INTEGRAL EQUATION FORMULATIONS FOR LEFT-HANDED MATERIALS
286
SURFACE INTEGRAL EQUATION METHOD FOR GENERAL COMPOSITE METALLIC AND DIELECTRIC STRUCTURES WITH JUNCTIONS
287
Surface integrity after pickling and anodization of Ti–6Al–4V titanium alloy
288
Surface integrity analysis of machined Inconel 718 over multiple length scales
289
Surface integrity and modification of electro-discharge machined alumina-based ceramic composite
290
Surface integrity and part accuracy in reaming and tapping stainless steel with new vegetable based cutting oils
291
Surface integrity and process mechanics of laser shock peening of novel biodegradable magnesium–calcium (Mg–Ca) alloy
292
Surface Integrity Difference between Hard Turned and Ground Surfaces and Its Impact on Fatigue Life
293
Surface integrity generated by oblique machining of steel and iron parts
294
Surface integrity in cryogenic machining of nickel based alloy—Inconel 718
295
Surface integrity in electro-discharge machining, ultrasonic machining, and diamond saw cutting of ceramic composites
296
Surface integrity in material removal processes: Recent advances
297
Surface integrity of a high speed milled gamma titanium aluminide
298
Surface integrity of biodegradable Magnesium–Calcium orthopedic implant by burnishing
299
Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models
300
Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
301
Surface integrity of selective-laser-melted components
302
Surface integrity of solvent-challenged ormocer-matrix composite
303
Surface interaction and chemical imaging in plasma spectrometry induced with a line-focused laser beam
304
Surface interaction between H2 and CO2 over silicalite-supported platinum
305
Surface interactions between Y2O3 nanocrystals and organic molecules—an experimental and quantum-chemical study
306
Surface Interactions in Steel Polishing for the Precision Tool Making
307
Surface interactions of Au(I) cyclo-trimer with Au(111) and Al(111) surfaces: A computational study
308
Surface interactions of Au(I) cyclo-trimer with Au(111) and Al(111) surfaces: A computational study
309
Surface interactions of chemically active ceramic tiles with polymer-modified mortars
310
Surface interactions of molecular C60 and impact on Ni(100) and Co(0001) film growth: A scanning tunneling microscopy study
311
Surface interactions of oxidized cellulose with fibrin(ogen) and blood platelets
312
Surface interactions of pyrene and phenanthrene on Cu-montmorillonite
313
Surface interactions, corrosion processes and lubricating performance of protic and aprotic ionic liquids with OFHC copper
314
Surface interfaces in low temperature water-gas shift: The metal oxide synergy, the assistance of co-adsorbed water, and alkali doping
315
Surface intermediates generated in the decomposition of C1 chlorofluorocarbons over oxides and zeolites of acid–base and redox character Original Research Article
316
Surface interpenetrating networks of polyacrylamide in poly(ethylene terephthalate) as a means of surface modification
317
Surface interpenetration between conducting polymer and PET substrate for mechanically reinforced ITO-free flexible organic solar cells
318
Surface interpolation from irregularly distributed points using surface splines, with Fortran program
319
Surface interpolation within a continental flood basalt province: An example from the Palaeogene Faroe Islands Basalt Group
320
Surface inventory of tritium on Li2TiO3
321
Surface investigation and catalytic activity of iron-modified TiO2
322
Surface investigation of adhesive formulation consisting of UV sensitive triblock poly(styrene–b-butadiene–b-styrene) copolymer
323
Surface investigation of lubricant–metal interactions by synchrotron photoemission spectroscopy
324
Surface investigation of plasma HMDSO membranes post-treated by CF4/Ar plasma
325
Surface investigation of Si(1 0 0), Cu, Cu on Si(1 0 0), and Au on Cu with positron annihilation induced Auger-electron spectroscopy
326
Surface investigation on thermal stability of tungstophosphoric acid supported on MCM-41 using synchrotron radiation Original Research Article
327
Surface investigations of old book paper treated with hydroxyapatite nanoparticles
328
Surface ionics: A brief review
329
Surface ionisation gas detection: Vertical versus planar readout modes
330
Surface ionization detection of amine containing drugs
331
Surface ionization detection of amphetamine-type illicit drugs
332
Surface ionization of alkali salt aerosol particles at atmospheric pressure
333
Surface IR applied to rapid and direct immunosensing of environmental pollutants
334
Surface iron ore mining in eastern India and local level sustainability
335
Surface irregularity of soils in molecular domain
336
Surface Irrigation of Dairy Farm Effluent, Part I: Nutrient and Bacterial Load
337
Surface Irrigation of Dairy Farm Effluent, Part II: System Design and Operation
338
Surface islands and their elastic interaction with adatoms
339
Surface joint systems, tectonic stresses and geomorphology: a reconciliation of conflicting observations
340
Surface kinetics and energetics from single crystal adsorption calorimetry lineshape analysis: Methyl from methyl iodide on Pt(1 1 1)
341
Surface kinetics and morphology of ArF laser-assisted etching of (113)A GaAs in a Cl2 environment
342
Surface kinetics of GaN evaporation and growth by molecular-beam epitaxy
343
Surface kinetics of nitrogen dissolution and its correlation to the slag structure in the CaO―SiO2, CaO―Al2O3, and CaO―SiO2―Al2O3 slag system
344
Surface Lagrangian Remeshing: A new tool for studying long term evolution of continental lithosphere from 2D numerical modelling
345
Surface Laplacian and fractal brain mapping
346
Surface laser-glazing of plasma-sprayed thermal barrier coatings
347
Surface lay effect on rough friction in roller contact
348
Surface layer carbon budget for the subtropical N. Pacific: δ13C constraints at station ALOHA
349
Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended tool
350
Surface layer CO2 budget and advective contributions to measurements of net ecosystem–atmosphere exchange of CO2
351
Surface layer condition and the fatigue strength of an AZ91 alloy after ball peening
352
Surface layer formed on silicon thin-film electrode in lithium bis(oxalato) borate-based electrolyte
353
Surface layer investigation of duplex stainless steel S32205 after stress peening utilizing X-ray diffraction
354
Surface layer mixing during the SAGE ocean fertilization experiment
355
Surface layer modification of ion bombarded HDPE
356
Surface layer plastic deformation as a mechanism for UHMWPE wear, and its role in debris size
357
Surface layer salinity gradients and flow patterns in the archipelago coast of SW Finland, northern Baltic Sea
358
Surface layer self diffusion in icosahedral Al–Pd–Mn quasicrystals
359
Surface layer stiffness effects on fracture of polymer multilayers: a linear elastic model
360
Surface layer temperature inversion in the Bay of Bengal
361
Surface layer turbulence parameters over a complex terrain
362
Surface layer turbulence processes in low wind speeds over land
363
Surface layer variability in the Ross Sea, Antarctica as assessed by in situ fluorescence measurements
364
Surface layering and local structure in liquid surfaces
365
Surface layering and local structure in liquid surfaces
366
Surface layering-induced crystallization of Ni–Si alloy drops Original Research Article
367
Surface leakage current control with heterojunction-type passivation in semi-insulating CdZnTe material
368
Surface leakage current control with heterojunction-type passivation in semi-insulating CdZnTe material
369
Surface Lewis acid–base properties of polymers measured by inverse gas chromatography
370
Surface Lidar Remote Sensing of Basal Area and Biomass in Deciduous Forests of Eastern Maryland, USA
371
Surface ligand effects in MEH-PPV/TiO2 hybrid solar cells
372
Surface light-induced drift due to anisotropic gas-surface scattering in models with and without boundary conditions
373
Surface light-induced drift resulting from inelastic scattering
374
Surface lipids and plant defenses
375
Surface loaded 1-methyl-3-ethylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM+Tf2N− ] hydrophobic ionic liquid on nano-silica sorbents for removal of lead from water samples Original Research Article
376
Surface loading and triggered earthquakes in the Koyna–Warna region, western India
377
Surface localized nitrogen incorporation in epitaxial FePd films and its effect in the Magneto-Optical properties
378
Surface longwave fluxes from satellite observations: A critical review
379
Surface loss probabilities of hydrocarbon radicals on amorphous hydrogenated carbon film surfaces: Consequences for the formation of redeposited layers in fusion experiments
380
Surface lubrication of graphite fabric reinforced epoxy composites with nano- and micro-sized hexagonal boron nitride
381
Surface machining of fine-grain Y-TZP
382
Surface magnetism at the nanometer and atomic scale
383
Surface magnetism of 3d monolayers on a W(1 1 0) substrate probed by X-ray magnetic circular dichroism
384
Surface magnetism of 3d monolayers on a W(1 1 0) substrate probed by X-ray magnetic circular dichroism
385
Surface magnetism of a semi-infinite decorated Ising system
386
Surface magnetism of Sc-substituted Ba-M hexaferrites
387
Surface magnetism of ultrathin Mn- and Cr-films on Fe 100/ studied via capture of polarized electrons by Heq-ions
388
Surface magnetism of YCo2
389
Surface magnetism studied by photoelectron spectromicroscopy with high spatial and time resolution
390
Surface magnetism: phase transitions in quantum and classical models
391
Surface magnetization dynamics at the nanosecond time scale
392
Surface magnetization dynamics at the nanosecond time scale
393
Surface magneto-optic Kerr effect study in ultrathin Co/Ge(1 1 1) and Co/Ge(1 0 0) films
394
Surface magneto-optical and Mössbauer observations of Fe–Al
395
Surface magnetoplasmons in silver nanoparticles: Apparent magnetic-field enhancement manifested by simultaneous deconvolution of UV–vis absorption and MCD spectra
396
Surface magnetostatic waves and magnetic polaritons at the junction of the magnetic superlattice and magnetic material
397
Surface Majorana cone of the topological superfluid 3He B phase
398
Surface manipulation of biomolecules for cell microarray applications
399
Surface Map Comparison: Studying Function Diversity of Homologous Proteins
400
Surface mapping of three-dimensional objects by a planar light scanning technique
401
Surface markers of fish T-cells
402
Surface mass diffusion and step stiffness on an anisotropic surface; Mo(0 1 1)
403
Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding
404
Surface materials: the frontier of solid state chemistry
405
Surface measurement and tracking of human body parts from multi-image video sequences
406
Surface Measurement Based on Instantaneous Random Illumination
407
Surface Measures and Tightness of (r,p)-Capacities on Poisson Space
408
Surface measures for accuracy evaluation in 3d face reconstruction
409
Surface mechanical behaviour of composite Ni–P–fly ash/zincate coated aluminium alloy
410
Surface mechanical effects of nitrogen ion implantation on vanadium alloys
411
Surface mechanical instabilities and dissipation under the action of an oscillating tip
412
Surface mechanical properties of S30432 austenitic steel after shot peening
413
Surface mechanical properties of transparent poly(methyl methacrylate)/zirconia nanocomposites prepared by in situ bulk polymerization
414
Surface mechanical property testing by depth sensing indentation
415
Surface mechanics of functional thin films on glass surfaces
416
Surface mechanomyogram reflects muscle fibres twitches summation
417
Surface mediated Ag–Hg alloy formation under ambient and vacuum conditions—AFM and XRD investigations
418
Surface mediated isotope exchange reactions between water and gaseous deuterium
419
Surface mediated yttrium deuteride formation
420
Surface melting and crystallization behavior of polyhydroxyalkanoates studied by attenuated total reflection infrared spectroscopy
421
Surface melting description
422
Surface melting observations in Antarctica by microwave radiometers: Correcting 26-year time series from changes in acquisition hours
423
Surface melting of close-packed Mg(0001)
424
Surface melting of crystallized poly(vinylidene fluoride) under carbon dioxide
425
Surface melting of methane and methane film on magnesium oxide
426
Surface melting of nanoscopic epitaxial films
427
Surface melting of nodular cast iron by Nd-YAG laser and TIG
428
Surface melting of Sn nanoparticles embedded in an Al matrix studied by high-temperature in situ X-ray diffraction
429
Surface melting of superheated crystals. Atomistic simulation study Original Research Article
430
Surface mesh enhancement with geometric singularities identification Original Research Article
431
Surface mesh quality evaluation
432
Surface mesh segmentation and smooth surface extraction through region growing Original Research Article
433
Surface mesh sizing control
434
Surface meshing using a geometric error estimate
435
Surface metal matrix composites
436
Surface metal modifiers for methanol electrooxidation on platinum, molybdenum and tungsten
437
Surface metallic nature caused by an in-gap state of reduced NiO: a photoemission study
438
Surface metallization of alumina ceramics by pulsed high energy density plasma process
439
Surface Methane Emission in a Former Dumpsite in Tijuana, Mexico
440
Surface metrology algorithm testing system
441
Surface micro/nanostructuring of titanium under stationary and non-stationary femtosecond laser irradiation
442
Surface microbiota analysis of Taleggio, Gorgonzola, Casera, Scimudin and Formaggio di Fossa Italian cheeses
443
Surface microcracks signal osteoblasts to regulate alignment and bone formation
444
Surface micro-fabrication of silica glass by excimer laser irradiation of organic solvent
445
Surface Micro-Hardness and Wear Resistance of a Self-Adhesive Flowable Composite in Comparison to Conventional Flowable Composites
446
Surface microhardness of different thicknesses of a premixed bioceramic material with or without the application of a moist cotton pellet
447
Surface microhardness of enamel after different home bleaching procedures
448
Surface microhardness of nanohybrid and microhybrid composite resins light cured at different distances
449
Surface micromachining for transition-edge detectors
450
Surface micromachining via solid electrochemical reaction on oxide ion conductors
451
Surface micropatterning to regulate cell functions
452
Surface microscopy features of congenital nevi
453
Surface microscopy of porous materials
454
Surface microstructural modification and fracture behavior of tensile deformed polypropylene with different percentage crystallinity
455
Surface microstructural modification and fracture behavior of tensile deformed polypropylene with different percentage crystallinity
456
Surface microstructure and cell biocompatibility of silicon-substituted hydroxyapatite coating on titanium substrate prepared by a biomimetic process
457
Surface microstructure and cell compatibility of calcium silicate and calcium phosphate composite coatings on Mg–Zn–Mn–Ca alloys for biomedical application
458
Surface microstructure and high temperature oxidation resistance of thermal sprayed CoCrAlY coating irradiated by high current pulsed electron beam
459
Surface microstructure and in vitro analysis of nanostructured akermanite (Ca2MgSi2O7) coating on biodegradable magnesium alloy for biomedical applications
460
Surface microstructure and mechanical property of WC-6% Co hard alloy irradiated by high current pulsed electron beam
461
Surface microstructure changes in the mechanically strained Fe–Al based intermetallics
462
Surface microstructure changes in the mechanically strained Fe–Al based intermetallics
463
Surface microstructure of 316L austenitic stainless steel by the salt bath nitrocarburizing and post-oxidation process known as QPQ
464
Surface microstructure of MgO deposited on SiO2 by analysis of plasmon excitations in photoemission experiments
465
Surface microstructure of MgO deposited on SiO2 by analysis of plasmon excitations in photoemission experiments
466
Surface microstructure of powder layers influenced by the forces of deposition and adhesion in electrostatic coating process
467
Surface microstructure of the oxide protective layers grown on vanadium-free Ti alloys for use in biomedical applications
468
Surface microstructures and antimicrobial properties of copper plasma alloyed stainless steel
469
Surface microstructures and epoxy bonded shear strength of Ti6Al4V alloy anodized at various temperatures
470
Surface Microstructures obtained by Femtosecond Laser Pulses
471
Surface microstructures of TSM resonators and liquid properties measurement
472
Surface microstructuring of silica glass by laser-induced backside wet etching with a DPSS UV laser
473
Surface micro-structuring of silicon by excimer-laser irradiation in reactive atmospheres
474
Surface microtextures of ice-rafted quartz grains revealing glacial ice in the Cenozoic Arctic
475
Surface micro-texturing of metallic cylindrical surface with proximity rolling-exposure lithography and electrochemical micromachining
476
Surface microtopography and soil penetration resistance associated with shrub patches in a semiarid rangeland
477
Surface microtopography in siloxane–polyurethane thermosets: The influence of siloxane and extent of reaction
478
Surface microtopography of surfactant modified montmorillonite
479
Surface mineral mapping at Steamboat Springs, Nevada, USA, with multi-wavelength thermal infrared images
480
Surface mineralisation of hydroxyapatite in modified simulated body fluid (mSBF) with higher amounts of hydrogencarbonate ions
481
Surface mineralization of Ti6Al4V substrates with calcium apatites for the retention and local delivery of recombinant human bone morphogenetic protein-2
482
Surface mineralogy and stratigraphy of the lunar South Pole-Aitken basin determined from Clementine UV/VIS and NIR data
483
Surface miscibility of EPC/DOTAP/DOPE in binary and ternary mixed monolayers
484
Surface mismatch and stress relief mechanisms at metallic surfaces
485
Surface mixed and mixing layer depths
486
Surface mobility over a square contact area of an infinite plate: experimental measurements and numerical prediction
487
Surface mode excitation in platelet SiOx precipitates in silicon
488
Surface mode excitation in platelet SiOx precipitates in silicon
489
Surface model of formation of silicon nitride on monocrystalline silicon
490
Surface modeling and chemical solution deposition of SrO(SrTiO3)n Ruddlesden–Popper phases Original Research Article
491
Surface modeling of human carrying capacity of terrestrial ecosystems in China
492
Surface modeling of human carrying capacity of terrestrial ecosystems in China
493
Surface Modeling: High Accuracy and High Speed Methods. CRC Press, published February (2011), 711 pp., hardbound, price 129.95 $
494
Surface Modeling: High Accuracy and High Speed Methods. CRC Press, published February (2011), 711 pp., hardbound, price 129.95 $
495
Surface modelling of crystalline non-metallic inclusions
496
Surface modelling of global terrestrial ecosystems under three climate change scenarios
497
Surface modelling of global terrestrial ecosystems under three climate change scenarios
498
Surface modelling of human population distribution in China
499
Surface modelling of human population distribution in China
500
Surface modelling of soil pH
501
Surface modelling of soil properties based on land use information
502
Surface modelling on heavy atom crystalline compounds: HfO2 and UO2 fluorite structures Original Research Article
503
SURFACE MODES AT THE INTERFACES BETWEEN ISOTROPIC MEDIA AND UNIAXIAL PLASMA
504
Surface modes in sheared boundary layers over impedance linings
505
Surface modes in the infrared spectrum of hydrous minerals: the OH stretching modes of bayerite
506
Surface modes with biquadratic coupling and uniaxial anisotropy in semi-infinite Heisenberg antiferromagnet
507
Surface modi®cation of oxide thin ®lm and its gas-sensing properties
508
Surface modi®cation of silicon and silica in biological environment: an X-ray photoelectron spectroscopy study
509
Surface modification and adhesion improvement of expanded poly(tetrafluoroethylene) films by plasma graft polymerization
510
Surface modification and aging studies of addition-curing silicone rubbers by oxygen plasma
511
Surface modification and alloying of metallic materials with low-energy high-current electron beams
512
Surface modification and antibacterial activity of electrospun polyurethane fibrous membranes with quaternary ammonium moieties
513
Surface modification and application of multi-walled carbon nanotubes in fire-retardant coatings
514
Surface modification and biocompatible improvement of polystyrene film by Ar, O2 and Ar + O2 plasma
515
Surface modification and bioconjugation of FeCo magnetic nanoparticles with proteins
516
Surface modification and characterisation of a coal-based activated carbon Original Research Article
517
Surface modification and characterisation of Ti–Al–V alloys
518
Surface modification and characterization of carbon black with oxygen plasma Original Research Article
519
Surface modification and characterization of highly dispersed silica nanoparticles by a cationic surfactant
520
Surface modification and characterization of impregnated paper
521
Surface modification and characterization of Jordanian kaolinite: Application for lead removal from aqueous solutions
522
Surface modification and characterization of magnesium hydroxide sulfate hydrate nanowhiskers
523
Surface modification and characterization of thermoplastic polyurethane
524
Surface modification and characterization of γ-Fe2O3 nanoparticles synthesized by chemically-induced transition
525
Surface modification and characterizations of basalt fibers with non-thermal plasma
526
Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation and deposition
527
Surface modification and crystallization of the BaO–B2O3–SiO2 glassy system using CO2 laser irradiation
528
Surface modification and development of titanium bipolar plates for PEM fuel cells
529
Surface modification and electrochemical studies of spherical nickel hydroxide
530
Surface modification and functionalization of silk fibroin fibers/fabric toward high performance applications
531
Surface modification and functionalization through the self-assembled monolayer and graft polymerization
532
Surface modification and hydrogen isotope retention in CFC during plasma irradiation in the Tore Supra tokamak
533
Surface modification and imaging of hydrogen passivated silicon with a combined scanning electron/scanning tunneling microscope
534
Surface modification and imaging of hydrogen passivated silicon with a combined scanning electron/scanning tunneling microscope
535
Surface modification and its effect on the interfacial properties of model aramid-fibre/epoxy composites
536
Surface modification and lamination of polymers by photografting
537
Surface modification and lamination of polymers by photografting
538
Surface modification and oxidation kinetics of hot-pressed AlN–SiC–MoSi2 electroconductive ceramic composite
539
Surface modification and paclitaxel drug delivery of folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles
540
Surface modification and performance enhancement of nano-hybrid f-MWCNT/PVP90/PES hemodialysis membranes
541
Surface modification and photocatalytic activity of distorted pyrochlore-type Bi2M(M=In, Ga and Fe)TaO7 photocatalysts Original Research Article
542
Surface modification and properties of Bombyx mori silk fibroin films by antimicrobial peptide
543
Surface modification and property analysis of biomedical polymers used for tissue engineering
544
Surface modification and retardation of back reaction by nitrogen ion-beam treatment in dye-sensitized solar cells
545
Surface modification and submicron structure of carbon fibers through high current pulse
546
Surface modification at the molecular level in mineral beneficiation
547
Surface modification at tungsten and tungsten coated graphite due to low energy and high fluence plasma and laser pulse irradiation
548
Surface modification by cold-plasma technique for dental implants—Bio-functionalization with binding pharmaceuticals
549
Surface modification by electrical discharge machining: A review Review Article
550
Surface modification by grafted sensitive polymer brushes: An ellipsometric study of their properties
551
Surface modification by negative-ion implantation
552
Surface modification by novel friction thermomechanical process of aluminum alloy castings
553
Surface modification by oil jet peening in Al alloys, AA6063-T6 and AA6061-T4: Residual stress and hardness
554
Surface modification by oil jet peening in Al alloys, AA6063-T6 and AA6061-T4 Part 2: Surface morphology, erosion, and mass loss
555
Surface modification by silver coating for improving electrochemical properties of LiFePO4
556
Surface modification by using of immobilized electrostatic self-assembly of bacteriorhodopsin as protein memory
557
Surface modification by using of immobilized electrostatic self-assembly of bacteriorhodopsin as protein memory
558
Surface modification by vacuum annealing for field emission from heavily phosphorus-doped homoepitaxial (1 1 1) diamond
559
Surface modification during Nd:YAG (1064 nm) pulsed laser cleaning of organic fibrous materials
560
Surface modification effects on film growth with atmospheric Ar/Ar+O2 plasma
561
Surface modification for adhesion enhancement of PET-laminated steel using atmospheric pressure plasma
562
Surface modification for aluminium pigment inhibition
563
Surface modification for controlled studies of cell–ligand interactions
564
Surface modification for enhanced silanation of zirconia ceramics
565
Surface modification for enhancing behaviors of vascular endothelial cells onto polyurethane films by microwave-induced argon plasma
566
Surface modification for hydrophilic property of stainless steel treated by atmospheric-pressure plasma jet
567
Surface modification for the perfluorosulfonate proton-conducting electrolyte membrane
568
Surface modification for titanium implants by hydroxyapatite nanocomposite
569
Surface modification in microsystems and nanosystems
570
Surface modification methods to improve behavior of biosensor based on imaging ellipsometry
571
Surface modification of (Tb,Dy)Fe2 alloy by nitrogen ion implantation
572
Surface modification of (Tb0.3Dy0.7)Fe1.95 alloy by ion nitriding process
573
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
574
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
575
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
576
Surface modification of 2205 duplex stainless steel by low temperature salt bath nitrocarburizing at 430 °C
577
Surface modification of 30CrNiMo8 low-alloy steel by active screen setup and conventional plasma nitriding methods
578
Surface modification of 316L stainless steel with high-intensity pulsed ion beams
579
Surface modification of 3Y-TZP with cerium oxide
580
Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75 mass% Si–Fe alloy electrode
581
Surface modification of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings
582
Surface modification of 9Cr18 bearing steels by a metal and carbon co-plasma immersion ion implantation
583
Surface modification of a biomedical poly(ether)urethane by a remote air plasma
584
Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma
585
Surface modification of a ceramic membrane by the SPCP-CVD method suitable for enzyme immobilization
586
Surface modification of a commercial thin film composite polyamide reverse osmosis membrane by carbodiimide-induced grafting with poly(ethylene glycol) derivatives Original Research Article
587
Surface modification of a commercial thin-film composite polyamide reverse osmosis membrane through graft polymerization of N-isopropylacrylamide followed by acrylic acid
588
Surface modification of a granular activated carbon by citric acid for enhancement of copper adsorption Original Research Article
589
Surface modification of a granular activated carbon by dielectric barrier discharge plasma and its effects on pentachlorophenol adsorption
590
Surface modification of a layered alkali titanate with organosilanes
591
Surface modification of a low cost bentonite for post-combustion CO2 capture
592
Surface modification of a low-modulus Ti–7.5Mo alloy treated with aqueous NaOH
593
Surface modification of a medical grade Co‐Cr‐Mo alloy by low-temperature plasma surface alloying with nitrogen and carbon
594
Surface modification of a microcellular porous solid: carbon foam
595
Surface modification of a natural graphite/phenol formaldehyde composite plate with expanded graphite
596
Surface modification of a perfluorinated ionomer using a glow discharge deposition method to control protein adsorption
597
Surface modification of a poly(vinyl chloride) membrane by UV irradiation for reduction in sludge adsorption Original Research Article
598
Surface modification of a polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet
599
Surface modification of a polyamide reverse osmosis membrane for chlorine resistance improvement
600
Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure
601
Surface modification of a polytetrafluoroethylene film with cyclotron ion beams and its evaluation
602
Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system
603
Surface modification of a silicate substrate by a “grafting from” methodology utilizing a perester initiator
604
Surface modification of a Ti–6Al–4V alloy by thermal oxidation
605
Surface modification of a Ti–Al–Zr alloy by niobium ion implantation
606
Surface modification of a titanium alloy with a phospholipid polymer prepared by a plasma-induced grafting technique to improve surface thromboresistance
607
Surface modification of a WTi thin film on Si substrate by nanosecond laser pulses
608
Surface modification of A2014 Al alloy using a pulse-current pressure sintering process
609
Surface modification of A390 hypereutectic Al–Si cast alloys using friction stir processing
610
SURFACE MODIFICATION OF AA 7075-T651 PLATE USING FRICTION STIR PROCESSING WITH SIC PARTICLES
611
Surface Modification of AB2 and AB5 Hydrogen Storage Alloy Electrodes by the Hot-Charging Treatment
612
Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process
613
Surface modification of activated carbon fiber and its adsorption for vitamin B1 and folic acid
614
Surface modification of activated carbon for CO2 adsorption
615
Surface modification of activated carbons for CO2 capture
616
Surface modification of active metals through atom transfer radical polymerization grafting of acrylics
617
Surface modification of aircraft used composites for adhesive bonding
618
Surface modification of AISI 304 austenitic stainless steel by plasma nitriding
619
Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENSTM)
620
Surface modification of Al–12.6Si alloy by high current pulsed electron beam
621
Surface modification of Al–20Si alloy by high current pulsed electron beam
622
Surface modification of Al2O3 bioceramic by NH+2 ion implantation
623
Surface Modification of Al2O3 Fiber with Binary Nanoparticles using a Dry-Mechanical Coating Technique
624
Surface Modification of Aligned Carbon Nanotube Arrays for Electron Emitting Applications
625
Surface modification of alumina by metal doping
626
Surface modification of alumina-based refractories using a xenon arc lamp
627
Surface modification of aluminium by friction stir processing
628
Surface modification of aluminium by plasma immersion ion implantation
629
Surface modification of aluminum by n-pentanephosphonic acid: XPS and electrochemical evaluation
630
Surface modification of aluminum by toluene plasma at low-pressure and its surface properties
631
Surface modification of aluminum foil and PTFE film by graft polymerization for adhesion enhancement
632
Surface modification of aluminum using ion nitriding and barrel nitriding
633
Surface modification of aluminum using ion nitriding and fluidized bed
634
Surface modification of aluminum with tin oxide coating
635
Surface modification of Al–Zn–Mg aluminum alloy using the combined process of EDM with USM
636
Surface modification of amorphous substrates by disulfide derivatives: A photo-assisted route to direct functionalization of chalcogenide glasses
637
Surface modification of an epoxy resin with polyamines via cyanuric chloride coupling
638
Surface modification of an experimental silicone rubber maxillofacial material to improve wettability
639
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
640
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
641
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
642
Surface modification of and selective protein attachment to a flexible microarray pattern using atmospheric plasma with a reactive gas
643
Surface modification of Angora rabbit fibers using dielectric barrier discharge
644
Surface modification of anodized Mg in ammonium hydrogen fluoride by various voltages
645
Surface modification of APA-TFC membrane with quaternary ammonium cation and salicylaldehyde to improve performance
646
Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processing
647
Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites
648
Surface modification of argon/oxygen plasma treated vulcanized ethylene propylene diene polymethylene surfaces for improved adhesion with natural rubber
649
Surface Modification of Asymmetric Polysulfone Membrane by UV Irradiation
650
Surface modification of austenitic stainless steel with plasma nitriding for biomedical applications
651
Surface modification of bacterial cellulose by nitrogen-containing plasma for improved interaction with cells
652
Surface modification of BaTiO3 particles by silane coupling agents in different solvents and their effect on dielectric properties of BaTiO3/epoxy composites
653
Surface modification of beta-tricalcium phosphate scaffolds with topological nanoapatite coatings
654
Surface modification of bi-axially expanded poly(tetrafluoroethylene) by plasma polymerization of ethylene
655
Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: Part I. Properties and characterization of treated films
656
Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: Part II. Long term aging surface properties
657
Surface modification of bioactive glass nanoparticles and the mechanical and biological properties of poly(l-lactide) composites
658
Surface modification of biodegradable polyesters with fatty acid conjugates for improved drug targeting
659
Surface modification of biodegradable porous Mg bone scaffold using polycaprolactone/bioactive glass composite
660
Surface modification of biomaterial embedded with pits using die sinker machine
661
Surface modification of biomaterials by plasma immersion ion implantation
662
Surface modification of biphasic calcium phosphate bioceramic powders
663
Surface modification of bisphenol A polycarbonate using an ultraviolet laser with high-speed, direct-writing technology
664
Surface Modification of BiVO4 Using (3-Aminopropyl) Triethoxysilane and Study of the Photocatalytic Properties and Process Optimization
665
Surface modification of bone char for removal of formaldehyde from air
666
Surface modification of boron nitride in hydrogen plasma
667
Surface modification of bovine bone ash prepared by milling and acid washing process
668
Surface modification of bulk n-InAs (111)A etched in bromine–methanol
669
Surface modification of CaCO3 nanoparticles by alkylbenzene sulfonic acid surfactant
670
Surface modification of CaF2 in atomic layer scale by electron beam exposure
671
Surface modification of calcined kaolin with toluene diisocyanate based on high energy ball milling
672
Surface modification of calcite by wet-stirred ball milling and its properties
673
Surface modification of calcium carbonate nanofillers by fluoro- and alkyl-alkoxysilane: Consequences on the morphology, thermal stability and gas barrier properties of polyvinylidene fluoride nanocomposites
674
Surface modification of calcium fluoro and hydroxyapatite by 1-octylphosphonic dichloride
675
Surface modification of calcium hydroxyapatite by grafting of etidronic acid
676
Surface modification of calcium–copper hydroxyapatites using polyaspartic acid
677
Surface modification of Cameroonian magnetite rich clay with Eriochrome Black T. Application for adsorption of nickel in aqueous solution
678
Surface modification of CaO–Al2O3–SiO2 glass by dissolution of aluminum and silicon components into alkali hydrothermal medium
679
Surface modification of carbon anodes for secondary lithium battery by fluorination
680
Surface modification of carbon black by anodic oxidation and electrochemical characterization Original Research Article
681
Surface modification of carbon black by nitrogen and allylamine plasma treatment for fuel cell electrocatalyst
682
Surface modification of carbon black nanoparticles by dodecylamine: Thermal stability and phase transfer in brine medium
683
Surface modification of carbon blackrelastomer composite by excimer laser ablation
684
Surface modification of carbon microspheres by KMnO4
685
Surface Modification of Carbon Nanotubes as a Key Factor on Rheological Characteristics of Water-Based Drilling Muds
686
Surface modification of carbon nanotubes for enhancing BTEX adsorption from aqueous solutions
687
Surface Modification of Carbon Nanotubes Using Acid Treatment to Enhance Gas Separation Performance of Hybrid Nanocomposite Mixed Matrix Membrane
688
Surface modification of carbon nanotubes with ethylene glycol plasma Original Research Article
689
Surface modification of carbon/carbon composites to improve their wettability by copper Original Research Article
690
Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites
691
Surface modification of carbonaceous materials and their use in polymer electrolyte fuel cells and hydrogen-air secondary batteries
692
Surface modification of carbons for enhanced electrochemical activity
693
Surface modification of carbons for enhanced electrochemical activity
694
Surface modification of cardiovascular materials and implants
695
Surface modification of cardo polyetherketone ultrafiltration membrane by photo-grafted copolymers to obtain nanofiltration membranes
696
Surface Modification of Cast Iron Containing 6 mass% Aluminum and Its Wear Property
697
Surface modification of cathodes with nanosized amorphous MnO2 coating for high-power application in lithium-ion batteries
698
Surface modification of Ca-α-SiAlON: Eu2+ phosphor particles by SiO2 coating and fabrication of its deposit by electrophoretic deposition (EPD) process
699
Surface modification of cell culture carriers: Routes to anhydride functionalization of polystyrene
700
Surface modification of cellulose by PCL grafts Original Research Article
701
Surface modification of cellulose membranes with zwitterionic polymers for resistance to protein adsorption and platelet adhesion
702
Surface modification of cellulose nanowhisker throughout graft polymerization of 2-ethyl-2-oxazoline
703
Surface modification of cellulose using silane coupling agent
704
Surface modification of cellulose via atmospheric pressure plasma processing in air and ammonia–nitrogen gas
705
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
706
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
707
Surface modification of cellulosic fibers using dielectric-barrier discharge
708
Surface modification of cellulosic fibres for multi-purpose TiO2 based nanocomposites
709
Surface modification of cemented carbide by EB polishing
710
Surface modification of cemented carbide using plasma nitriding and metal ion implantation
711
Surface Modification of Ceramic Materials Using Excimer Laser
712
Surface modification of ceramic matrix composites induced by laser treatment
713
Surface modification of ceramic powders by titanate coupling agent for injection molding using partially water soluble binder system
714
Surface modification of ceramics for improved tribological properties
715
Surface modification of ceria nanoparticles and their chemical mechanical polishing behavior on glass substrate
716
Surface modification of chalcogenide glasses by N2 plasma treatment
717
Surface modification of chitosan films.: Effects of hydrophobicity on protein adsorption Original Research Article
718
Surface modification of chitosan for selective surface–protein interaction
719
Surface modification of chromatography adsorbents by low temperature low pressure plasma
720
Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells
721
Surface modification of Cl-adsorbed Si(1 1 1)-7 × 7 by the irradiation of infrared pulsed laser
722
Surface modification of clay minerals
723
Surface modification of clays and clay–rubber composite
724
Surface modification of CNTs and enhanced photocatalytic activity of TiO2 coated on hydrophilically modified CNTs
725
Surface modification of cobalt–chromium–tungsten–nickel alloy using octadecyltrichlorosilanes
726
Surface modification of coconut-based activated carbon by liquid-phase oxidation and its effects on lead ion adsorption Original Research Article
727
Surface modification of co-evaporated thin films upon oxygen and air exposure
728
Surface modification of coir fibre involving oxidation of lignins followed by reaction with furfuryl alcohol: Characterization and stability
729
Surface modification of commercial aromatic polyamide reverse osmosis membranes by graft polymerization of 3-allyl-5,5-dimethylhydantoin
730
Surface modification of commercial cellulose acetate membranes using surface-initiated polymerization of 2-hydroxyethyl methacrylate to improve membrane surface biofouling resistance
731
Surface modification of commercial polyamide desalination membranes using poly(ethylene glycol) diglycidyl ether to enhance membrane fouling resistance
732
Surface modification of conjugated polymers: an application of near-field optical microscopy in sub-micron photochemistry
733
Surface modification of constructional steels by irradiation with high intensity pulsed nitrogen plasma beams
734
Surface Modification of Copper Current Collector to Improve the Mechanical and Electrochemical Properties of Graphite Anode in Lithium-Ion Battery
735
Surface modification of copper using high intensity, 1015 W/cm2, femtosecond laser in vacuum
736
Surface modification of copper with 2-dodecylpropane-1,3-dithiol: The key effect of the solvent
737
Surface modification of core–shell nanowire with protein adsorption
738
Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption
739
Surface modification of cotton fabric by grafting of polyurethane
740
Surface modification of cotton fabrics for antibacterial application by coating with AgNPs–alginate composite
741
Surface modification of cotton yarn with a DC glow discharge in ambient air
742
Surface modification of CP-Ti to improve the fretting-corrosion resistance: Thermal oxidation vs. anodizing
743
Surface Modification of CTA-FO Membrane by CO2 Plasma Treatment
744
Surface modification of Cu metal particles by the chemical reaction between the surface oxide layer and a halogen surfactant Original Research Article
745
Surface modification of cyclic olefin copolymer substrate by oxygen plasma treatment
746
Surface modification of DF-2 tool steel under the scan of a YAG laser in continuously moving mode
747
Surface modification of diamond-like carbon films to graphene under low energy ion beam irradiation
748
Surface modification of diamond-like carbon films with perfluorooctyl functionalities and their surface properties
749
Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings
750
Surface modification of diatomite using polyaniline
751
Surface modification of doped ZnO thin films
752
Surface modification of Dy2O3–Nb2O5 dope mix for dielectric materials in aqueous dispersion
753
Surface modification of elastomerrcarbon composite by Ndq:YAG laser and KrF excimer laser ablation
754
Surface modification of electrical contacts by cold gas dynamic spraying process
755
Surface modification of electrospun cellulose acetate nanofibers via RAFT polymerization for DNA adsorption
756
Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering
757
Surface modification of electrospun polyacrylonitrile nanofiber towards developing an affinity membrane for bromelain adsorption Original Research Article
758
Surface modification of electrospun spherical activated carbon for a high-performance biosensor electrode
759
Surface modification of epoxy resin by polyether–polydimethylsiloxanes–polyether triblock copolymers
760
Surface modification of EVA copolymer by UV treatment
761
Surface modification of exchange-coupled Co/NiOx magnetic bilayer by bias sputtering
762
Surface modification of Fe3O4@SiO2 microsphere by silane coupling agent
763
Surface modification of ferromagnetics for polymer composites
764
Surface modification of fibrillar silicate and its reinforcing mechanism on FS/rubber composites
765
Surface modification of filter medium particles with silane coupling agent KH550
766
Surface modification of fluorinated aluminas: Application of solid state NMR spectroscopy to the study of acidity and surface structure
767
Surface modification of fluorosilicone acrylate RGP contact lens via low-temperature argon plasma
768
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
769
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
770
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
771
Surface modification of GaAs during argon ionic cleaning and nitridation: EELS, EPES and XPS studies
772
Surface modification of gas diffusion layers by inorganic nanomaterials for performance enhancement of proton exchange membrane fuel cells at low RH conditions
773
Surface Modification of Glassy Carbon Electrode by Ni-Cu Nanoparticles as a Competitive Electrode for Ethanol Electro-Oxidation
774
Surface modification of goethite by phosphate for enhancement of Cu and Cd adsorption
775
Surface modification of gold nanoparticles and their monolayer behavior at the air/water interface
776
Surface modification of gold nanoparticles with 6- mercapto-1-hexanol to facilitate dual conjugation of protoporphyrin IX and folic acid for improving the targeted photochemical internalization
777
Surface modification of gold nanorods using layer-by-layer technique for cellular uptake
778
Surface modification of gold nanotubules via microwave radiation, sonication and chemical etching
779
Surface modification of graphene and graphite by nitrogen plasma: Determination of chemical state alterations and assignments by quantitative X-ray photoelectron spectroscopy
780
Surface modification of graphite anodes by combination of high temperature gas treatment and silylation in nonaqueous solution
781
Surface modification of graphite by coke coating for reduction of initial irreversible capacity in lithium secondary batteries
782
Surface modification of graphitized carbonaceous materials by electropolymerization of thiophene and their effects on electrochemical properties Original Research Article
783
Surface modification of g-TiAl alloys by acetylene plasma deposition
784
Surface modification of hafnia with polyelectrolytes based on the spin-coating electrostatic self-assembly method
785
Surface modification of halogenated polymers. 4. Functionalisation of poly(tetrafluoroethylene) surfaces by diazonium salts
786
Surface modification of halogenated polymers. 6. Graft copolymerization of poly(tetrafluoroethylene) surfaces by polyacrylic acid
787
Surface modification of halogenated polymers. 9. Etching of polytetrafluoroethylene with the scanning electrochemical microscope
788
Surface modification of halogenated polymers: 5. Localized electroless deposition of metals on poly(tetrafluoroethylene) surfaces
789
Surface modification of hard alloy by Y ion implantation under different atmosphere
790
Surface modification of Hastelloy C-276 by SiC addition and electron beam melting
791
Surface modification of heterogeneous cation exchange membrane through simultaneous using polymerization of PAA and multi walled carbon nano tubes
792
Surface modification of high calcium fly ash for its application in oil spill clean up
793
Surface modification of high heat resistant UV cured polyurethane dispersions
794
Surface modification of high performance PBO fibers using radio frequency argon plasma
795
Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints
796
Surface modification of highly oriented pyrolytic graphite by reaction with atomic nitrogen at high temperatures
797
Surface modification of high-performance polymeric fibers by an oxygen plasma. A comparative study of poly(p-phenylene terephthalamide) and poly(p-phenylene benzobisoxazole)
798
Surface modification of high-speed steel by intense pulsed ion beam irradiation
799
Surface modification of HMS material with silica sol leading to a remarkable enhanced catalytic performance of Cu/SiO2
800
Surface modification of HSA containing magnetic PLGA nanoparticles by poloxamer to decrease plasma protein adsorption
801
Surface modification of hydroturbine steel using friction stir processing
802
Surface modification of hydroxyapatite nanoparticles by poly(l-phenylalanine) via ROP of l-phenylalanine N-carboxyanhydride (Pha-NCA)
803
Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP
804
Surface modification of hydroxyapatite. Part I. Dodecyl alcohol
805
Surface modification of hydroxyapatite. Part II. Silica
806
Surface modification of III–V semiconductors: chemical processes and electronic properties
807
Surface modification of imide containing polymers I: Catalytic groups
808
Surface modification of imide containing polymers II: Co-reactive groups
809
Surface modification of indium tin oxide anode with self-assembled monolayer modified Ag film for improved OLED device characteristics
810
Surface modification of indium tin oxide films by amino ion implantation for the attachment of multi-wall carbon nanotubes
811
Surface modification of indium tin oxide films with Au ions implantation: Characterization and application in bioelectrochemistry
812
Surface modification of indium tin oxide films with NH2+ ion implantation: Surface properties and gold nanoparticles attachment
813
Surface modification of inorganic layer compound with organic compound and preparation of thin films
814
Surface modification of investment cast-316L implants: Microstructure effects
815
Surface modification of ion exchange membrane using amines
816
Surface modification of iron containing aluminum alloys by treatment with copper plasma produced with cathodic arc
817
Surface modification of iron particles with polystyrene and surfactants under high-energy ball milling
818
Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites
819
Surface modification of La0.3Sr0.7CoO3−δ ceramic membranes
820
Surface modification of laser ablated YBCO target
821
Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds
822
Surface modification of LDPE by a DC corona discharge generated in a point-to-grid system: the influence of geometric parameters of the system on modification power
823
Surface modification of LDPE film by CO2 pulsed laser irradiation
824
Surface modification of lead silicate glass under X-ray irradiation
825
Surface modification of Lexan treated by RF plasma
826
Surface modification of Li[Li0.2Ni0.2Mn0.6]O2 nanoparticles with polydopamine-assisted MgF2 coating
827
Surface modification of Li1.03Mn1.97O4 spinels for improved capacity retention
828
Surface modification of LiCoO2 with Li3xLa2/3−xTiO3 for all-solid-state lithium ion batteries using Li2S–P2S5 glass–ceramic
829
Surface modification of LiMn2O4 thin films at elevated temperature
830
Surface modification of LiNi0.8Co0.2O2 with La2O3 for lithium-ion batteries
831
Surface modification of LiNi1/2Mn3/2O4 thin-films by zirconium alkoxide/PMMA composites and their effects on electrochemical properties
832
Surface modification of lipid nanocapsules with polysaccharides: From physicochemical characteristics to in vivo aspects
833
Surface modification of low and high temperature co-fired ceramics for enzymatic microreactor fabrication
834
Surface modification of low carbon steel substrate by Al-rich clad layer applied by GTAW
835
Surface modification of low cost carbons for their application in the environmental protection
836
Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment
837
Surface modification of lyocell fibres by graft copolymerization of thermo-sensitive poly-N-isopropylacrylamide
838
Surface modification of macroporous glycidyl methacrylate based copolymers for selective sorption of heavy metals
839
Surface modification of magnesium alloys using triazine dithiols
840
Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate) via one-pot in situ polymerization
841
Surface modification of magnetic metal nanoparticles through irradiation graft polymerization
842
Surface Modification of Magnetic MnFe2O4@SiO2 Core-shell Nanoparticles with deposited Layer of 3-Aminopropyl Triethoxysilane
843
Surface Modification of Magnetic Nanoparticles Using Gum Arabic
844
Surface modification of magnetic nanoparticles with oleylamine and gum Arabic
845
Surface modification of magnetite nanoparticles using gluconic acid and their application in immobilized lipase
846
Surface modification of magnetite nanoparticles using lactobionic acid and their interaction with hepatocytes
847
Surface modification of magnetron-sputtered hydroxyapatite thin films via silicon substitution for orthopaedic and dental applications
848
Surface modification of maize starch films by low-pressure glow 1-butene plasma
849
Surface modification of MAl2O4:Eu2+,Dy3+ (M = Sr, Ca, Ba) phosphors to enhance water resistance by combustion method
850
Surface modification of M-Ba-ferrite powders by polyaniline: Towards improving microwave electromagnetic response
851
Surface modification of m-BiVO4 with wide band-gap semiconductor BiOCl to largely improve the visible light induced photocatalytic activity
852
Surface modification of membranes for the separation of volatile organic compounds from water by pervaporation Original Research Article
853
Surface modification of mesoporous membranes by fluoro-silane coupling reagent for CO2 separation
854
Surface Modification of Mesoporous Nanosilica with [3-(2-Aminoethylamino) propyl] trimethoxysilaneand Its Application in Drug Delivery
855
Surface modification of metal alloys by plasma immersion ion implantation and subsequent plasma nitriding
856
Surface modification of Mg67–Zn30–Y3 quasicrystal alloy by high current pulsed electron beam
857
Surface modification of mica due to titanium sputtering as studied by positron annihilation
858
Surface modification of micro- and nanocarriers for anticancer, anti-diabetic, antimicrobial, and anti-neurodegenerative applications: PEGylation strategy
859
Surface modification of microfibrillated cellulose for epoxy composite applications
860
Surface modification of microporous polypropylene membranes by the grafting of poly(γ-stearyl-l-glutamate)
861
Surface modification of microporous polyurethane membrane with poly(ethylene glycol) to develop a novel membrane
862
Surface modification of microporous PVDF membranes by ATRP
863
Surface modification of microporous PVDF membranes for neuron culture
864
Surface Modification of Mild Steel Using Tungsten Inert Gas Torch Surface Cladding
865
Surface modification of Mitoxantrone-loaded PLGA nanospheres with chitosan
866
Surface modification of monodisperse hydroxyl functionalized polymeric microspheres using ceric ammonium nitrate
867
Surface Modification of Multilayer Coatings Ti-Al-Cr and Hydroxyapatite on Calcium Phosphate Cement with Sol-Gel Method
868
Surface modification of multi-walled carbon nanotubes by a sol–gel reaction to increase their compatibility with PMMA resin
869
Surface modification of multi-walled carbon nanotubes by O2 plasma
870
Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane
871
Surface modification of nano-apatite by grafting organic polymer
872
Surface modification of nanocast ordered mesoporous carbons through a wet oxidation method Original Research Article
873
Surface modification of nanocolloidal silica for use as polishing abrasive particles
874
Surface modification of nanocomposite ceramic membranes by PDMS for condensable hydrocarbons separation Original Research Article
875
Surface modification of nanocrystalline anatase with CTAB in the acidic condition and its effects on photocatalytic activity and preferential growth of TiO2
876
Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation
877
Surface modification of nanofibrous poly(acrylonitrile-co-acrylic acid) membrane with biomacromolecules for lipase immobilization
878
Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering
879
Surface modification of nanofiltration membranes by ion implantation
880
Surface modification of nanofiltration membranes to improve the removal of organic micro-pollutants (EDCs and PhACs) in drinking water treatment: Graft polymerization and cross-linking followed by functional group substitution
881
Surface modification of nanophase hydroxyapatite with chitosan
882
Surface modification of nano-porous anodic alumina membranes and its use in electroosmotic flow
883
Surface modification of nanoporous materials for electric double layer capacitors application
884
Surface modification of nanosheet oxide photocatalysts
885
Surface modification of nanosilica with 3-mercaptopropyl trimethoxysilane: Experimental and theoretical study on the surface interaction
886
Surface modification of nano-SiO2 particles using polyaniline
887
Surface modification of nano-sized HZSM-5 and HFER by pre-coking and silanization
888
Surface modification of nanostructured ceramic membranes for direct contact membrane distillation
889
Surface modification of nano-TiO2 with trimellitylimido-amino acid-based diacids for preventing aggregation of nanoparticles
890
Surface modification of natural graphite particles for lithium ion batteries
891
Surface modification of natural halloysite clay nanotubes with aminosilanes. Application as catalyst supports in the atom transfer radical polymerization of methyl methacrylate Original Research Article
892
Surface modification of natural leather using low-pressure parallel plate plasma
893
Surface modification of natural Na-montmorillonite in alkane solvents using a quaternary ammonium surfactant
894
Surface modification of natural rubber by TiO2 film
895
Surface modification of natural rubber film by polymerisation of methyl methacrylate in water-based system
896
Surface modification of natural rubber latex films by graft copolymerization
897
Surface modification of natural zeolite by chitosan and its use for nitrate removal in cold regions
898
Surface modification of Ni catalysts with trace Pd and Rh for oxidative steam reforming of methane Original Research Article
899
Surface modification of Ni catalysts with trace Pt for oxidative steam reforming of methane
900
Surface modification of Ni/Al2O3 with Pt: Highly efficient catalysts for H2 generation via selective decomposition of hydrous hydrazine
901
Surface modification of nickel hydroxide particles by micro-sized cobalt oxide hydroxide and properties as electrode materials
902
Surface modification of NiTi alloy with tantalum to improve its biocompatibility and radiopacity
903
Surface modification of NiTi by plasma based ion implantation for application in harsh environments
904
Surface modification of NiTi for orthopaedic braces by plasma immersion ion implantation
905
Surface modification of NiTi/PZT heterostructure thin films using various protective layers for potential MEMS applications
906
Surface modification of nodular cast iron: A comparative study on graphite elimination
907
Surface modification of nonporous glass beads with chitosan and their adsorption property for transition metal ions
908
Surface modification of non-woven fabric by DC pulsed plasma treatment and graft polymerization with acrylic acid
909
Surface modification of oil fly ash and its application in selective capturing of carbon dioxide
910
Surface modification of OPC-based cement using a frequency doubled Nd:YAG laser system
911
Surface modification of P(EMA-co-HEA)/SiO2 nanohybrids for faster hydroxyapatite deposition in simulated body fluid?
912
Surface modification of paclitaxel-loaded polymeric nanoparticles: Evaluation of in vitro cellular behavior and in vivo pharmacokinetic
913
Surface modification of paper and cellulose by plasma-assisted deposition of fluorocarbon films
914
Surface modification of PDMS by atmospheric-pressure plasma-enhanced chemical vapor deposition and analysis of long-lasting surface hydrophilicity
915
Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate
916
Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules
917
Surface modification of PE film by DBD plasma in air
918
Surface modification of PE porous membranes based on the strong adhesion of polydopamine and covalent immobilization of heparin
919
Surface modification of Penicillium chrysogenum mycelium for enhanced anionic dye removal
920
Surface modification of perfluorosulfonic acid membranes with perfluoroheptane (C7F16)/argon plasma
921
Surface modification of PET film by a DBD device at atmospheric pressure
922
Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization
923
Surface modification of piezoelectric aluminum nitride with functionalizable organosilane adlayers
924
Surface modification of pitch-based spherical activated carbon by CVD of NH3 to improve its adsorption to uric acid
925
Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling
926
Surface modification of plasticized PVC by dry cleaning methods: Consequences for artworks
927
Surface modification of platinum quartz crystal microbalance by controlled electroless deposition of gold nanoparticles and its enhancing effect on the HS-DNA immobilization
928
Surface modification of PLGA nanoparticles via human serum albumin conjugation for controlled delivery of docetaxel
929
Surface modification of PLGA/β-TCP scaffold for bone tissue engineering: Hybridization with collagen and apatite
930
Surface modification of PMMA by DC glow discharge and microwave plasma treatment for the improvement of coating adhesion
931
Surface modification of PMMA polymer in the interaction with oxygen-argon RF plasma
932
Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating
933
Surface modification of poly(acrylonitrile-co-maleic acid) membranes by the immobilization of poly(ethylene glycol)
934
Surface modification of poly(amidoamine) (PAMAM) dendrimer as antimicrobial agents
935
Surface modification of poly(dimethylsiloxane) by atmospheric pressure high temperature plasma torch to prepare high-performance gas separation membranes
936
Surface modification of poly(dimethylsiloxane) by two-step plasma treatment for further grafting with chitosan–Rose Bengal photosensitizer
937
Surface modification of poly(dimethylsiloxane) for microfluidic assay applications
938
Surface modification of poly(dimethylsiloxane) microchips using a double-chained cationic surfactant for efficiently resolving fluorescent dye adsorption
939
Surface modification of poly(ethylene terephthalate) (PET) by magnet enhanced dielectric barrier discharge air plasma
940
Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide
941
Surface modification of poly(ethylene terephthalate) fibers induced by radio frequency air plasma treatment
942
Surface modification of poly(ethylene-co-vinyl alcohol): hydroxyapatite immobilization and control of periodontal ligament cells differentiation
943
Surface modification of poly(hydroxybutyrate) films to control cell–matrix adhesion
944
Surface modification of poly(lactide-co-glycolide) nanoparticles by d-α-tocopheryl polyethylene glycol 1000 succinate as potential carrier for the delivery of drugs to the brain
945
Surface modification of poly(l-lactic acid) to improve its cytocompatibility via assembly of polyelectrolytes and gelatin
946
Surface modification of poly(l-lactide) electrospun fibers with nanocrystal hydroxyapatite for engineered scaffold applications
947
Surface modification of poly(oligoethylene oxide methacrylate) for resisting protein adsorption
948
Surface modification of poly(propylene carbonate) by aminolysis and layer-by-layer assembly for enhanced cytocompatibility
949
Surface modification of poly(propylene carbonate) by oxygen ion implantation
950
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)
951
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via UV-induced graft polymerization of N-vinyl pyrrolidone
952
Surface modification of poly(tetrafluoroethylene) by excimer laser processing: enhancement of adhesion
953
Surface modification of poly(tetrafluoroethylene) by saddle field fast atom beam source
954
Surface modification of poly(tetrafluoroethylene) films by plasma polymerization of glycidyl methacrylate for adhesion enhancement with evaporated copper
955
Surface modification of poly(tetrafluoroethylene) films via plasma treatment and graft copolymerization of acrylic acid Original Research Article
956
Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer
957
Surface modification of poly(vinylidene fluoride) by alkaline treatment Part 2. Process modification by the use of phase transfer catalysts
958
Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas
959
Surface modification of poly(vinylidenefluoride) to improve the osteoblast adhesion
960
Surface modification of poly(ε-caprolactone) using a dielectric barrier discharge in atmospheric pressure glow discharge mode
961
Surface modification of poly[2-methoxy,5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene] in the optical near field
962
Surface modification of polyacrylonitrile fiber for immobilization of antibodies and detection of analyte Original Research Article
963
Surface modification of polyacrylonitrile film by anchoring conductive polyaniline and determination of uricase adsorption capacity and activity
964
Surface modification of polyacrylonitrile nanofibrous membranes with superior antibacterial and easy-cleaning properties through hydrophilic flexible spacers
965
Surface modification of polyacrylonitrile-based carbon fiber and its interaction with imide
966
Surface modification of polyamide 66 fabric by microwave induced grafting with 2-hydroxyethyl methacrylate
967
Surface modification of polyamide fibers and films using atmospheric plasmas
968
Surface modification of polyaniline film by grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion
969
Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering
970
Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility
971
Surface modification of polycrystalline iron surfaces by n-dodecanethiol: an XPS investigation
972
Surface modification of polydimethylsiloxane with photo-grafted poly(ethylene glycol) for micropatterned protein adsorption and cell adhesion
973
Surface modification of polyester fabric by corona discharge irradiation
974
Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma
975
Surface modification of polyester to produce a bacterial cellulose-based vascular prosthetic device
976
Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)–polyurethane–methoxyl poly(ethylene glycol)
977
Surface modification of polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil/water emulsions
978
Surface modification of polyethersulfone ultrafiltration membranes by corona plasma-assisted coating TiO2 nanoparticles
979
Surface modification of polyethylene balloon catheters for local drug delivery
980
Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy
981
Surface modification of polyethylene film by acrylamide graft and alcoholysis for improvement of antithrombogenicity
982
Surface modification of polyethylene for improving the adhesion of a highly fluorinated UV-cured coating
983
Surface modification of polyethylene terephthalate by plasma immersion ion implantation
984
Surface modification of polyethylene terephthalate with albumin and gelatin for improvement of anticoagulation and endothelialization
985
Surface modification of polyethyleneterephthalate by an atmospheric-pressure plasma source
986
Surface modification of polyimide (PI) film using water cathode atmospheric pressure glow discharge plasma
987
Surface modification of polyimide alignment films by ion beams for liquid crystal displays
988
Surface modification of polyimide film by coupling reaction for copper metallization
989
Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air
990
Surface modification of polyimide films via plasma polymerization and deposition of allylpentafluorobenzene
991
Surface modification of polyimide membranes by diethylenetriamine (DETA) vapor for H2 purification and moisture effect on gas permeation
992
Surface modification of polyimide using dielectric barrier discharge treatment
993
Surface modification of poly-l-lactic acid fibrous scaffolds by a molecular-designed multi-walled carbon nanotube multilayer for enhancing cell interactions Original Research Article
994
Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet
995
Surface modification of polymer latex particles by AGET ATRP of a styrene derivative bearing a lactose residue
996
Surface modification of polymer nanofibres by plasma treatment
997
Surface modification of polymer using AC-pulsed plasma: Optimization of the electrical parameters and characterization by contact angle and probe-tack tests
998
Surface modification of polymer-based microfluidic devices Original Research Article
999
Surface modification of polymeric blends by nitrogen plasma implantation
1000
Surface modification of polymeric microspheres using glycopolymers for biorecognition
