بر اساس عنوان

1
Corrigendum to: “Wetting transition of water on graphite and boron-nitride surfaces: A molecular dynamics study” [Fluid Phase Equilib. 302 (2011) 310–315]
2
Corrigendum to: “Wrinkling prediction of rectangular shell-membrane under transverse in-plane displacement” [Int. J. Solids Struct. 44 (2007) 6507–6516]
3
Corrigendum to: “β-1,3-Glucan/antisense oligonucleotide complex stabilized with phosphorothioation and its gene suppression” [Bioorg. Chem. 38 (6) (2010) 260–264]
4
Corrigendum to: “β-Ferrocenyl-β-amino alcohols: a new class of central chiral ferrocene derivatives” [JOM 642 (2002) 212–226]
5
Corrigendum to: a computational study of proton and electron affinities
6
Corrigendum to: A facile three-component [3+2]-cycloaddition/annulation domino protocol for the regio- and diastereoselective synthesis of novel penta- and hexacyclic cage systems, involving the generation of two heterocyclic rings and five contiguous ste
7
Corrigendum to: A Molecular Study on Cutaneous Leishmaniasis Lesions in Khuzestan Province (South West of Iran)
8
Corrigendum to: A Molecular Study on Cutaneous Leishmaniasis Lesions in Khuzestan Province (South West of Iran) [published in Jundishapur J Microbiol. 2011;4(4):283-288]
9
Corrigendum to: A new extended Gibbs thermodynamic potential of seawater [Progress in Oceanography 58 (2003) 43–114]
10
Corrigendum to: Assessment of combined heat and power (CHP) integrated with wood-based ethanol production [Applied Energy 87 (12) (2010) 3632–3641]
11
Corrigendum to: Basin inversion by distributed deformation: the southern margin of the Bristol Channel Basin, England [Journal of Structural Geology 27 (2005) 2113–2134]
12
Corrigendum to: Bioinformatic Analysis of Codon Usage and Phylogenetic Relationships in Different Genotypes of the Hepatitis C Virus
13
Corrigendum to: Catalytic combustion of methane over palladium on alumina catalysts: Evidence for reconstruction of particles (Appl. Catal. A, 109 (1994) 277–291) (APCATA 2705)
14
Corrigendum to: civil use of depleted uranium
15
Corrigendum to: Common asset pricing factors in volatilies and returns in futures markets
16
Corrigendum to: Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect [Mater. Sci. Eng. A 531 (2012) 112–118]
17
Corrigendum to: Comparison of Serum Hepatitis B Virus DNA and HBsAg Levels Between HBeAg-Negative and HBeAg-Positive Chronic Hepatitis B Patients [Published in Jundishapur Journal of Microbiology. 2015 March; 8(3)
18
Corrigendum to: Considering the dispersive interactions in the COSMO-SAC model for more accurate predictions of fluid phase behavior [Fluid Phase Equilib. 367 (2014) 109–116]
19
Corrigendum to: Controlled coupling of NV defect centers to plasmonic and photonic nanostructures [Journal of Luminescence 130 (2010) 1628–1634]
20
Corrigendum to: Crystal Structures of Escherichia coli RecA in a Compressed Helical Filament [J. Mol. Biol. (2004) 342, 1471–1485]
21
Corrigendum to: Dealing with Coronary Artery Disease in Early Encountering: A Qualitative Study [published in Int Cardiovasc Res J. 2014 December; 8(4): 166-170]
22
Corrigendum to: Derivation of a drinking water equivalent level (DWEL) related to the maximum contaminant level goal for perfluorooctanoic acid (PFOA), a persistent water soluble compound [47 (10) 2557–2589]
23
Corrigendum to: Dielectric dispersion in aqueous colloidal systems [Curr Opin Colloid Interface Sci (2010) 145–159]
24
Corrigendum to: Effect of nanostructure on osteoinduction of porous biphasic calcium phosphate ceramics. Acta Biomaterialia 8 (2012) 3794–3804
25
Corrigendum to: Effects of ageing on bainitic and thermally induced martensitic transformations in ductile Cu–Al–Mn-based shape memory alloys [Acta Mater. 57 (2009) 5748–5758]
26
Corrigendum to: Effects of Calci Soya Balance and Vitagnus on Menopausal Symptoms
27
Corrigendum to: Efficient one-pot synthesis of anti HIV and antitumor compounds: harman and substituted harmans: [Tetrahedron Lett. 44 (2003) 4761]
28
Corrigendum to: Examining associations between smartphone use, smartphone addiction, and mental health outcomes: a cross-sectional study of college students Kil N, Kim J, McDaniel JT, Kim J, Kensinger K. Health Promot Perspect. 2021;11(1):36-44. doi: 10.34172/hpp.2021.06
29
Corrigendum to: Fluid control of localized mineral domains in limestone pressure solution structures [Journal of Structural Geology 28 (2006), 284–301]
30
Corrigendum to: Immediate and Delayed Effects of Forearm Kinesio Taping on Grip Strength
31
Corrigendum to: Improvement of ligand economy controlled by polymer morphology: the case of polymer-supported Bis(oxazoline)catalysts
32
Corrigendum to: Influence of fuzzy norms and other heuristics on “Mixed fuzzy rule formation” [Int. J. Approx. Reason. 35 (2004) 195–202]
33
Corrigendum to: Measurement of marine hydrocarbon seep flow through fractured rock and unconsolidated sediment: [Marine and Petroleum Geology 22 (2005), 551–558]
34
Corrigendum to: Mechanical properties and microstructures of 2D Cf/ZrC–SiC composites using ZrC precursor and polycarbosilane
35
Corrigendum to: Molecular Detection of Isoniazid and Rifampin Resistance in Mycobacterium tuberculosis Isolates from Lorestan Province, Iran from 2014 to 2017
36
Corrigendum to: Non-toxic novel route synthesis and characterization of nanocrystalline ZnSxSe1−x thin films with tunable band gap characteristics [Mater. Res. Bull. 55 (2014) 106-113]
37
Corrigendum to: Novel hyperbranched poly(phenylene oxide)s with phenolic terminal groups: Synthesis, characterization, and modification: [Polymer 47 (2006) 1511–1518]
38
Corrigendum to: on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites
39
Corrigendum to: Operative Hysteroscopy Intravascular Absorption Syndrome: The Gynaecology s TURP Syndrome-A Case Report
40
Corrigendum to: Optimum profile modifications of spur gears by means of genetic algorithms
41
Corrigendum to: Oxygen isotopic anomaly in surface induced ozone dissociation [Chem. Phys. Lett. 369 (2003) 662]
42
Corrigendum to: Paleo sea levels reconsidered from direct observation of paleoshoreline position during Glacial Maxima (for the last 500,000 years) [Earth Planet. Sci. Lett. 252 (2006), 119--137]
43
Corrigendum to: Peroxynitrite formation in nitric oxide-exposed submitochondrial particles: Detection, oxidative damage and catalytic removal by Mn–porphyrins [Arch. Biochem. Biophys. 529 (2013) 45–54]
44
Corrigendum to: Poly(N-vinyl-2-pyrrolidone) hydrogel production by ultraviolet radiation: new methodologies to accelerate crosslinking
45
Corrigendum to: Postnatal development of interstitial cells of Cajal in mouse colon in response to Kit signal blockade with Imantinib (Glivec®)
46
Corrigendum to: Prevalence and incidence of type 1 diabetes in the world: a systematic review and meta-analysis Mobasseri M, Shirmohammadi M, Amiri T, Vahed N, Hosseini Fard H, Ghojazadeh M. Health Promot Perspect. 2020 Mar 30;10(2):98-115. doi: 10.34172/hpp.2020.18
47
Corrigendum to: Risk factors associated with inpatient cardiac arrest during emergency endotracheal intubation at general wards
48
Corrigendum to: Riverine silicon isotope variations in glaciated basaltic terrains: Implications for the Si delivery to the ocean over glacial–interglacial intervals [Earth Planet. Sci. Lett. 369–370 (2013) 211–219]
49
Corrigendum to: Self-consistent modeling of turbulence and transport [J. Comput. Phys. 185 (2003) 399–426]
50
Corrigendum to: Soil nutrient dynamics during podzol development under lowland temperate rain forest in New Zealand [Catena (2012) 50–62]
51
Corrigendum to: Structure, functional organization and biological traits of macroinvertebrate assemblages from leaf-bags and benthic samples in a third-order stream of Central Apennines (Italy) [Ecological Indicators 46 (2014) 84–91]
52
Corrigendum to: Synthesis, spectroscopic characterization, X-ray crystal structure and magnetic properties of oxalato-bridged copper(II) dinuclear complexes with di-2-pyridylamine [Inorganica Chimica Acta 353 (2003) 119–128]
53
Corrigendum to: Texture Development in Near-α Ti Friction Stir Welds [Acta Materialia 58(19), pp. 6452–6463]
54
Corrigendum to: The Effect of Caffeic Acid Phenethyl Ester on Development of Left Ventricular Dysfunction in Cirrhotic Rats [Published in Int Cardiovasc Res J.2016; 10(4).icrj.35598]
55
Corrigendum to: The Effects of Insulin-Like Growth Factor-1 Gene Therapy and Cell Transplantation on Rat Acute Wound Model
56
Corrigendum to: The enantioselectivity of quinohaemoprotein alcohol dehydrogenases: mechanistic and structural aspects: [J. Mol. Catal. B: Enzym. 8 (2000) 121–163]
57
Corrigendum to: Theoretical design parameters for a quasi-zero stiffness magnetic spring for vibration isolation [J. Sound Vib. 326 (1–2) (2009) 88–103]
58
Corrigendum to: Thin film epitaxy and magnetic properties of STO/TiN buffered ZnO on Si(0 0 1) substrates [Acta Materialia 59 (2011) 2526–2534]
59
Corrigendum to: Torus palatinus in end-stage renal disease patients receiving peritoneal dialysis: Does renal osteodystrophy play a role? [J Dent Sci 2012;7:154–8]
60
Corrigendum to: Towards biofuel combustion with an easily extruded clay as a natural catalyst [Appl. Energy 107 (2013) 149–156]
61
Corrigendum to: Two new aromatic compounds and a new d-arabinitol ester from the mushroom Hericium erinaceum [Tetrahedron 68 (2012) 2007–2010]
62
Corrigendum to: β-Diketone: Mg2+ ground and excited state interaction [J. Lumin. 131 (2011) 994–1001]
63
Corrigendum to:‘‘ Zinc-8-hydroxyquinoline intercalated in calcium bentonite: a promising DO sensor’’ [J. Phys. Chem. Solids 71(4)(2010) 423–426]
64
Corrigendum to“Nivolumab and Ipilimumab in the Treatment ofMetastatic Uveal Melanoma: A Single-Center Experience
65
Corrigendum to“Synthesis, Morphology, and HydrogenAbsorption Properties of TiVMn and TiCrMn Nanoalloys with aFCC Structure
66
Corrigendum to“Those Who Hear Music: Three Cases onMusical Hallucinations
67
Corrigendum to “From gamma ray line signals of dark matter to the LHC” [Phys. Dark Universe 2(1) (2013) 22-34]
68
Corrigendum/addendum to: Sets of matrices all infinite products of which converge Original Research Article
69
Corrigendum: ‘An improved mixing model providing joint statistics of scalar and scalar dissipation’ [Combust. Flame 155 (2008) 490–508]
70
Corrigendum: “Experimental characterisation and object-oriented finite element modelling of polypropylene/organoclay nanocomposites” [Compos Sci Technol 68 (14) (2008) 2864–2875]
71
Corrigendum: “New Frontiers in the Space Propulsion Sciences”, by Glen A. Robertson, P.A. Murad, Eric Davis, Energy Convers. Manage. 49 (2008) 436–452
72
Corrigendum: “The effect of topical endometrial scratching on pregnancy outcome in women with previous failure of intrauterine insemination: A non-randomized clinical trial” [Int J Reprod BioMed 2021; 19: 465-470]
73
Corrigendum: Accelerating the sustainable development goals through microbiology: some efforts and opportunities
74
Corrigendum: Animal models of mucosal inflammation and their relation to human inflammatory bowel disease
75
CORRIGENDUM: Anti-Melanogenic Activity and Cytotoxicity of Pistacia Vera Hull on Human Melanoma SKMEL-3 Cells
76
Corrigendum: Biosynthesis of the polyene antifungal antibiotic nystatin in Streptomyces noursei ATCC 11455: analysis of the gene cluster and deduction of the biosynthetic pathway
77
Corrigendum: Comment on “Predicting event soil loss from bare plots at two Italian sites” by Bagarello et al. 2013
78
Corrigendum: Corrected value of the beta-emission asymmetry in the decay of polarized neutrons measured in 1990
79
CORRIGENDUM: Correction to “Performance Limits for Estimators of the Risk or Distribution of Shrinkage-Type Estimators, and Some General Lower Risk-Bound Results”
80
Corrigendum: Corrigendum to “Critical locus and vapor–liquid equilibria of HFC32–HFC125 system” [Fluid Phase Equilib. 194–197 (2002) 995–1008]
81
Corrigendum: Does a Single Metal Ion Bridge the A-9 and Scissile Phosphate Groups in the Catalytically Active Hammerhead Ribozyme Structure?
82
Corrigendum: Little evidence for fire-adapted plant traits in Mediterranean climate regions: [S. Don Bradshaw et al. Little evidence for fire-adapted plant traits in Mediterranean climate regions. Trends Plant Sci. 16, 69–76]
83
Corrigendum: Little evidence for fire-adapted plant traits in Mediterranean climate regions: [S. Don Bradshaw et al. Little evidence for fire-adapted plant traits in Mediterranean climate regions. Trends Plant Sci. 16, 69–76]
84
Corrigendum: Molecular basis of sex determination in haplodiploids
85
Corrigendum: On the space–time regularity of image—very weak solutions to the Navier–Stokes equations: [Nonlinear Anal. 58 (2004) 703]
86
CORRIGENDUM: Peripheral Venous Malformations With a Dominant Outflow Vein: Results of Ethanol Embolization
87
Corrigendum: Phytoremediation of toxic elemental and organic pollutants
88
CORRIGENDUM: Promoter Hypermethylation of the Eyes Absent 4 Gene Is a Tumor-Specific Epigenetic Biomarker in Iranian Colorectal Cancer Patients
89
Corrigendum: Reactive oxygen and reactive nitrogen intermediates in innate and specific immunity
90
Corrigendum: Shared representations between self and other: a social cognitive neuroscience view
91
Corrigendum: The extremal values of the Wiener index of a tree with given degree sequence
92
Corrigendum: The proactive brain: using analogies and associations to generate predictions: [Trends in Cognitive Sciences 11 (2007), 280–289]
93
Corrigendum: Tutorial on Applied Study Designs in Medical Research
94
CORRIGENDUM: Volume 64, Number 2 (1998), in the article “A Unified and Broadened Class of Admissible Minimax Estimators of a Multivariate Normal Mean”, pages 196–205
95
CORRIGENDUM: Volume 67, Number 1 (1998), in the article “Improved Estimation in Measurement Error Models Through Stein Rule Procedure,” by Shalabh, pp. 35–48
96
CorrigendumCorrigendum to “The discovery of acylated β-Amino acids as potent and orally bioavailable VLA-4 antagonists”[Bioorg. Med. Chem. Lett. 12 (2002) 611]
97
Corrigendun to “The moments of ruin time in the classical risk model with discrete claim size distribution” [Insurance: Mathematics and Economics 23 (1998) 157–172]
98
Corrin nitrogens and remote dimethylbenzimidazole nitrogen interactions in Cob(II)alamin studied with HYSCORE at X- and Q-band
99
Corringendum to
100
Corroborated rainfall records from aragonitic stalagmites
101
Corroboration of an intermediate phase transition in CsH2PO4 by Brillouin spectroscopy between room temperature and the superionic phase transition
102
Corroborative Models of the Cobalt(II) Inhibited Fe/Mn Superoxide Dismutases
103
Corroded post-tensioned beams with bonded tendons and wire failure
104
Corroded, Thinned and Polished Bones Created by Golden Eagles (Aquila chrysaetos): Taphonomic Implications for Archaeological Interpretations
105
Corrole dyes for dye-sensitized solar cells: The crucial role of the dye/semiconductor energy level alignment
106
Corrole synthesis by dipyrromethane–dicarbinol and 2,2′-bipyrrole condensation
107
Corrosion Protection of Copper by TiO2 Nanoparticles and SN Schiff base Coating
108
Corrosion analysis and inhibition studies in the process of natural gas wet desulfurization
109
Corrosion analysis of bulk carriers, Part I: operational parameters influencing corrosion rates
110
Corrosion analysis of CLAM steel in flowing liquid LiPb at 480 °C
111
Corrosion analysis of NiCu and PdCo thermal seed alloys used as interstitial hyperthermia implants
112
Corrosion and activation analysis of the LIPAC beam dump cooling circuit
113
Corrosion and activation in fusion cooling loops—TRACT
114
Corrosion and adhesion study of polyurethane coating on silane pretreated aluminum
115
Corrosion and anodic behaviour of zinc and its ternary alloys in alkaline battery electrolytes
116
Corrosion and Antibacterial Behavior of CrN Single-layer Coating and CrN/Cu Multilayer Nanostructured Coatings Applied by Cathodic Arc Evaporation Technique
117
Corrosion and biaxial fatigue of welded structures
118
Corrosion and Bioactivity Properties of Calcium-Phosphate PEO Coating on AZ31 Mg Alloy Reinforced by Forsterite (Mg2SiO4) Nanoparticles
119
Corrosion and biocompatibility testing of palladium alloy castings
120
Corrosion and cell adhesion behavior of TiN-coated and ion-nitrided titanium for dental applications
121
Corrosion and corrosion fatigue behaviors of 9cr steel in a supercritical water condition
122
Corrosion and corrosion inhibition of Al and some alloys in sulphate solutions containing halide ions investigated by an impedance technique
123
Corrosion and Corrosion Inhibition of α-Brass by Thiourea
124
Corrosion and corrosive wear of annealed, impact-fractured and slow bending-fractured surface layers of AISI 1045 steel in a 3.5% NaCl solution
125
Corrosion and degradation behavior of Zr-based AB2 alloy electrodes during electrochemical cycling
126
Corrosion and deposition of ferrous alloys in molten lead–bismuth
127
Corrosion and deuterium uptake of Zr-based alloys in supercritical water
128
Corrosion and drug release properties of EN-plating/PLGA composite coating on MAO film
129
Corrosion and electrical properties of multi-layered coatings on stainless steel for PEMFC bipolar plate applications
130
Corrosion and erosion damage mechanisms during erosion–corrosion of WC–Co–Cr cermet coatings
131
Corrosion and erosion performance of HVOF/TiAlN PVD coatings and candidate materials for high pressure gate valve application
132
Corrosion and fatigue characteristics of positively polarised Zeron 100 base & weld metal in synthetic seawater
133
Corrosion and fatigue failure analysis of a forced draft fan blade
134
Corrosion and fatigue research — structural issues and relevance to naval aviation
135
Corrosion and fouling of tubes used in a thermosyphon economizer: a case study of paint protection
136
Corrosion and impedance studies on magnesium alloy in oxalate solution
137
Corrosion and inhibition of stainless steel pitting corrosion in alkaline medium and the effect of Cl and Br anions
138
Corrosion and ion release behavior of Cu/Ti film prepared via physical vapor deposition in vitro as potential biomaterials for cardiovascular devices
139
Corrosion and its inhibition in SA213-T22 TIG weldments used in power plants under neutral and alkaline environments
140
Corrosion and mechanical behavior evaluation of in-situ synthesized Cu-TiB2 nanocomposite
141
Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media Original Research Article
142
Corrosion and mechanical properties of duplex-treated 301 stainless steel
143
Corrosion and mechanical properties of epoxy-polyurethane/bronze composite coatings with low infrared emissivity
144
Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti–6Al–4V and Al plates
145
Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless steel
146
Corrosion and microstructural characteristics of Zr–Nb alloys with different Nb contents
147
Corrosion and nanomechanical properties of vanadium carbide thin film coatings of tool steel
148
Corrosion and oxidation behavior of amorphous and nanoquasicrystalline phases in Zr70Pd30 and Zr80Pt20 alloys
149
Corrosion and oxidation properties of NiCr coatings sprayed in presence of gas shroud system
150
Corrosion and oxidation resistance study of reactive ion beam mixed 316 SS
151
Corrosion and oxide characteristics of Zr–1.5Nb–0.4Sn–0.2Fe–0.1Cr alloys in 360 °C pure water and LiOH solution
152
Corrosion and passivation behavior of Mg–Zn–Y–Al alloys prepared by cooling rate-controlled solidification
153
Corrosion and passivation in nanoscopic and microscopic dimensions: the influence of grains and grain boundaries
154
Corrosion and protection of carbon steel in low enthalpy geothermal fluids. The case of SOUSAKI IN Greece
155
Corrosion and recession mechanism of Lu2Si2O7/mullite eutectic
156
Corrosion and recession of mullite in water vapor environment
157
Corrosion and scale inhibition of low carbon steel in cooling water system by 2-propargyl-5-o-hydroxyphenyltetrazole
158
Corrosion and Scale Inhibition Properties of Sodium Lignosulfonate and Its Potential Application in Recirculating Cooling Water System
159
Corrosion and scale processes and their inhibition in simulated cooling water systems by monosaccharides derivatives: Part I: EIS study Original Research Article
160
Corrosion and Scaling Potential in Drinking Water Distribution of Babol, Northern Iran Based on the Scaling and Corrosion Indices
161
Corrosion and Scaling Potential in Drinking Water Distribution System of Tabriz, Northwestern Iran
162
Corrosion and Scaling Potential of Drinking Water Resources of Sarayan County, Iran
163
Corrosion and scaling potential of the potable water in villages based on langelier saturation index, ryznar stability index, larson ratio, and saturation level
164
Corrosion and scaling potentials of rural water distribution network in different climate zones of Kermanshah province, Iran
165
Corrosion and scaling problems present in some desalination plants in Abu Dhabi
166
Corrosion and stress corrosion cracking behavior of equal channel angular pressed oxygen-free copper in 3.5% NaCl solution
167
Corrosion and stress corrosion cracking in supercritical water
168
Corrosion and stress corrosion cracking of ferritic/martensitic steel in super critical pressurized water
169
Corrosion and surface characterization of titanium biomaterial after magnetoelectropolishing
170
Corrosion and synergy in a WCsingle bondCosingle bondCr HVOF thermal spray coating—understanding their role in erosion–corrosion degradation
171
Corrosion and tensile behaviors of ultra-fine grained Al–Mn alloy produced by accumulative roll bonding
172
Corrosion and tribo-corrosion behavior of a-SiCx:H, a-SiNx:H and a-SiCxNy:H coatings on SS301 substrate
173
Corrosion and tribocorrosion behaviour of Al–Si–Cu–Mg alloy and its composites reinforced with B4C particles in 0.05 M NaCl solution
174
Corrosion and tribocorrosion behaviour of cermet and cermet/nanoscale multilayer CrN/NbN coatings
175
Corrosion and tribocorrosion behaviour of thermally sprayed ceramic coatings on steel
176
Corrosion and tribo-corrosion enhancement of SS301 and Ti–6Al–4V substrates by amorphous hydrogenated SiN/SiC/a-C multilayer coating architecture
177
Corrosion and tribological behaviors of chromium oxide coatings prepared by the glow-discharge plasma technique
178
Corrosion and tribological properties and impact fatigue behaviors of TiN- and DLC-coated stainless steels in a simulated body fluid environment
179
Corrosion and tribological studies of chromium nitride coated on steel with an interlayer of electroplated chromium
180
Corrosion and UV Resistant Coatings Using Fluoroethylene Vinyl Ether Polymer
181
Corrosion and wear behavior of ultra-hard Ni-Cr electrodeposits on CK45 steel substrate obtained from Cr(III) based baths
182
Corrosion and wear behaviors of ferrous powder thermal spray coatings on aluminum alloy
183
Corrosion and wear of 6082 aluminum alloy
184
Corrosion and wear properties of laser surface modified NiTi with Mo and ZrO2
185
Corrosion and wear properties of PEO coatings formed on AM60B alloy in NaAlO2 electrolytes
186
Corrosion and wear properties of TiC/Ni–Mo composites produced by direct consolidation during a self-propagating high-temperature reaction
187
Corrosion and wear resistance of a Fe-based amorphous coating in underground environment
188
Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank’s solution
189
Corrosion and wear resistance of hypoeutectic Zn–Al alloys as a function of structural features
190
Corrosion and wear studies of uncoated and ultra-thin DLC coated magnetic tape-write heads and magnetic tapes
191
Corrosion and wear-corrosion behavior of NiTi modified by plasma source ion implantation
192
Corrosion and wear-corrosion resistance properties of electroless Ni–P coatings on GFRP composite in wind turbine blades
193
Corrosion aspects of Ni–Cr–Fe based and Ni–Cu based steam generator tube materials
194
Corrosion behavior analysis of an austenitic stainless steel exposed to fire
195
Corrosion behavior and adhesion of ion-plated TiN films on AISI 304 steel
196
Corrosion behavior and biocompatibility of strontium and fluorine co-doped electrodeposited hydroxyapatite coatings
197
Corrosion behavior and composition analysis of chromate passive film on electroless Ni-P coating
198
Corrosion behavior and electrical conductivity of niobium implanted 316L stainless steel used as bipolar plates in polymer electrolyte membrane fuel cells
199
Corrosion behavior and fibrinogen adsorptive interaction of SS316L surfaces covered with ethylene glycol plasma polymer-coated Ti nanoparticles
200
Corrosion behavior and glass-forming ability of Cu–Zr–Al–Nb alloys
201
Corrosion behavior and in vitro biocompatibility of Zr–Al–Co–Ag bulk metallic glasses: An experimental case study
202
Corrosion behavior and mechanical properties of bioactive sol-gel coatings on titanium implants
203
Corrosion behavior and mechanical properties of Mg–Zn–Ca amorphous alloys
204
Corrosion behavior and oxide properties of Zr–1.1 wt%Nb–0.05 wt%Cu alloy
205
Corrosion Behavior and Protection Efficiency of 2024AI and SiCp/2024AI Metal Matrix Composite
206
Corrosion behavior and protective ability of multilayer Galvanic coatings of Zn and Zn–Mn alloys in sulfate containing medium
207
Corrosion behavior and protective ability of Zn and Zn–Co electrodeposits with embedded polymeric nanoparticles
208
Corrosion behavior and strength degradation of Ti3SiC2 exposed to a eutectic K2CO3 and Li2CO3 mixture
209
Corrosion behavior and surface characterization of tantalum implanted TiNi alloy
210
Corrosion behavior and surface characterization of titanium in solution containing fluoride and albumin
211
Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
212
Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
213
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates
214
Corrosion behavior in 1 N H2SO4 of zirconium ion implanted with nickel
215
Corrosion Behavior in Artificial Saliva of Dental Alloy used by Different Concentration of Juglans Regia
216
Corrosion behavior in high heat input welded heat-affected zone of Ni-free high-nitrogen Fe–18Cr–10Mn–N austenitic stainless steel
217
Corrosion behavior in simulated environments of ITZO films prepared by two targets co-sputtering
218
Corrosion behavior of (Ti–Al–Cr–Si–V)xNy coatings on mild steels derived from RF magnetron sputtering
219
Corrosion Behavior of 110S Tube Steel in Environments of High H2S and CO2 Content Original Research Article
220
Corrosion behavior of 316L stainless steel and Zr75Ti25 bulk amorphous alloy in simulated PEMFC anode environment in a solution containing 12.5 ppm H2SO4 + 1.8 ppm HF at 25 and 80 °C
221
CORROSION BEHAVIOR OF 6063 ALUMINUM ALLOY IN ETHYLENE GLYCOL-WATER SOLUTION
222
Corrosion behavior of 9Cr-ODS steel in stagnant liquid lithium and lead–lithium at 873 K
223
Corrosion Behavior of a Fe-25at%Sn Supersaturated Solid Solution in H3PO4 Solution
224
Corrosion behavior of a ferritic/martensitic steel HCM12A exposed to harsh environments
225
Corrosion behavior of a glassy Ti–Zr–Hf–Cu–Ni–Si alloy
226
Corrosion behavior of a laser-welded NiTi shape memory alloy
227
Corrosion behavior of a new titanium alloy for dental implant applications in fluoride media
228
Corrosion Behavior of a Nickel-Base Dental Casting Alloy in Artificial Saliva Studied by Weight Loss and Polarization Techniques
229
Corrosion behavior of a welded stainless-steel orthopedic implant
230
Corrosion behavior of AISI 316L stainless steel surface-modified with NiTi
231
Corrosion behavior of AISI 4130 steel alloy in ethylene glycol–water mixture in presence of molybdate
232
Corrosion behavior of Al100 − xCux (15 ≤ x ≤ 45) doped Nd–Fe–B magnets
233
Corrosion Behavior of Al-2wt%Cu Alloy Processed By Accumulative Roll Bonding (ARB) Process
234
Corrosion behavior of Al-alloying high Cr-ODS steels in lead–bismuth eutectic
235
Corrosion behavior of Al-Cu-Fe quasicrystals
236
Corrosion behavior of Al-Cu-Fe quasicrystals
237
Corrosion behavior of Alloy 690 and Alloy 693 in simulated nuclear high level waste medium
238
Corrosion behavior of Al–Si–Cu–(Sn, Zn) brazing filler metals
239
Corrosion behavior of Al-surface-treated steels in liquid Pb–Bi in a pot
240
Corrosion behavior of aluminium in ethyleneglycol–water electrolytes containing EDTA
241
Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods
242
Corrosion behavior of aluminum oxide coatings created by electrolytic plasma method under different potential regimes
243
Corrosion Behavior of API 5L X70 Carbon Steels in Hydrogen Sulfide Environments
244
Corrosion behavior of AZ91 magnesium alloy in dilute NaCl solutions
245
Corrosion behavior of AZ91 Mg alloy anodized by low-energy micro-arc oxidation: Effect of aluminates and silicates
246
Corrosion Behavior of Bioactivated Titanium Dental Implant Using Different Chemical Methods
247
Corrosion behavior of biodiesel from seed oils of Indian origin on diesel engine parts
248
Corrosion behavior of biomedical Ti–24Nb–4Zr–8Sn alloy in different simulated body solutions
249
Corrosion behavior of boride layers evaluated by the EIS technique
250
Corrosion behavior of borided AISI H13 hot work steel
251
Corrosion Behavior of Calcium-Phosphorus Coatings on AZ31B Mg Alloy by Plasma Electrolytic Oxidation in Hank's Balanced Salt Solution
252
Corrosion behavior of carbon implanted ZIRLO alloy in 1 M H2SO4
253
Corrosion behavior of carbon nanotubes–Ni composite coating
254
Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles
255
Corrosion behavior of carbon-implanted M5 alloy in 1 M H2SO4
256
Corrosion behavior of cast titanium with reduced surface reaction layer made by a face-coating method
257
Corrosion behavior of Ce-oxide/hydroxide coated AA7075-T6 prepared by dipimmersion method
258
Corrosion behavior of chromium and oxygen plasma-modified magnesium in sulfate solution and simulated body fluid
259
Corrosion behavior of CLAM steel in static and flowing LiPb at 480 °C and 550 °C
260
Corrosion behavior of CLAM steel weldment in flowing liquid Pb-17Li at 480 °C
261
Corrosion behavior of coating with plasma sprayed 8YSZ on the surface of carbon steel
262
Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel
263
Corrosion behavior of cold sprayed titanium protective coating on 1Cr13 substrate in seawater
264
Corrosion behavior of copper alloys in chloride media
265
Corrosion Behavior of Copper Alloys in Seawater with emphasis on UNC C95700
266
Corrosion Behavior of Copper and Carbon Steel in Acidic Media
267
Corrosion behavior of copper thin films deposited by EB-PVD technique on thermally grown silicon dioxide and glass in hydrochloric acid media
268
Corrosion behavior of copper/LDPE nanocomposites in simulated uterine solution
269
Corrosion behavior of Cr3C2–NiCr vacuum plasma sprayed coatings
270
Corrosion behavior of CrN coatings enhanced by niobium ion implantation
271
Corrosion behavior of Cu55Zr35Ti10 metallic glass in the chloride media
272
Corrosion behavior of different alloys exposed to continuous flowing seawater by electrochemical impedance spectroscopy (EIS) Original Research Article
273
Corrosion Behavior of Different Steel Substrates Coupled With Conductive Polymer Under Different Serving Conditions Original Research Article
274
Corrosion behavior of different tantalum crystal faces in NH4Br–ethanol solution and DFT calculation
275
Corrosion behavior of duplex coatings
276
Corrosion behavior of electrochemically assembled nanoporous titania for biomedical applications
277
Corrosion behavior of electrodeposited Ni–Co alloy coatings under the presence of NaCl deposit at 800 °C
278
Corrosion Behavior of Electrodeposited Zn-Ni, Zn-Co and Zn-Ni-Co Alloys
279
Corrosion behavior of electroless deposited Ni–Cu–P coating in flue gas condensate
280
Corrosion behavior of electroless nickel-coated AISI 304 stainless steel enhanced by titanium ion implantation
281
Corrosion behavior of electroless Ni–P alloy coatings containing tungsten or nano-scattered alumina composite in 3.5% NaCl solution
282
Corrosion Behavior of Electroless Ni-P/nanoZnO Coatings
283
Corrosion behavior of epoxy/zinc duplex coated rebar embedded in concrete in ocean environment
284
Corrosion behavior of EUROFER steel in flowing eutectic Pb–17Li alloy
285
Corrosion behavior of Fe–14Cr–2W and Fe–9Cr–2W ODS steels in stagnant liquid Pb with different oxygen concentration at 550 and 650°C
286
Corrosion behavior of Fe-40Al sheet in N2–11.2O2–7.5CO2 atmospheres with various SO2 contents at 1273 K
287
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
288
Corrosion behavior of Fe–Ni–Cr alloys in the molten salt of LiCl–Li2O at high temperature
289
Corrosion behavior of ferritic/martensitic steel P92 in supercritical water
290
Corrosion Behavior of Ferritic/Martensitic Steels CNS-I and Modified CNS-II in Supercritical Water Original Research Article
291
Corrosion behavior of gadolinium and La–Fe–Co–Si compounds in various heat conducting fluids
292
Corrosion behavior of glass and glass-ceramics made of municipal solid waste incinerator fly ash
293
Corrosion behavior of hybrid coatings: Electroless Ni–Cu–P and sputtered TiN
294
Corrosion behavior of Inconel 690 and 693 in an iron phosphate melt
295
Corrosion behavior of low alloy steels containing Cr, Co and W in synthetic potable water
296
Corrosion behavior of low alloy steels containing Cr, Co and W in synthetic potable water
297
Corrosion behavior of low alloy steels containing Cr, Co and W in synthetic potable water
298
Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
299
Corrosion behavior of magnetic ferrite coating prepared by plasma spraying
300
Corrosion behavior of magnetron sputtered α-Ta coatings on smooth and rough steel substrates
301
Corrosion behavior of martensitic and precipitation hardening stainless steels treated by plasma nitriding
302
Corrosion behavior of materials in RO water containing 250–350 ppm chloride Original Research Article
303
Corrosion behavior of MgO/CaZrO3 refractory matrix by clinker
304
Corrosion behavior of mild steel immersed in different concentrations of NaCl solutions
305
Corrosion behavior of Ni-based structural materials for electrolytic reduction in lithium molten salt
306
Corrosion behavior of NiTi alloys coated with diamond-like carbon (DLC) fabricated by plasma immersion ion implantation and deposition
307
Corrosion behavior of nitride layer obtained on AISI 316L stainless steel via simple direct nitridation route at low temperature
308
Corrosion behavior of novel 3%Cr pipeline steel in CO2 Top-of-Line Corrosion environment
309
Corrosion behavior of novel imitation-gold copper alloy with rare earth in 3.5% NaCl solution
310
Corrosion behavior of oil tube steel in simulant solution with hydrogen sulfide and carbon dioxide
311
Corrosion behavior of oxide-covered Cu47Ti34Zr11Ni8 (Vitreloy 101) in chloride-containing solutions
312
Corrosion behavior of palladium–silver–copper alloys in model saliva
313
Corrosion behavior of Pb–Sn and Pb–2 mass% Sn–Sr alloys during repetitive current application
314
Corrosion Behavior of PEO Coatings on 6061 Al Alloy: Effect of Sodium Fluoride Addition to Aluminate based Electrolyte
315
Corrosion behavior of phosphorus ion-implanted Ni50.6Ti49.4 shape memory alloy
316
Corrosion behavior of plasma sprayed ceramic and metallic coatings on carbon steel in simulated seawater
317
Corrosion behavior of plasma sprayed hydroxyapatite and hydroxyapatite-silicon oxide coatings on AISI 304 for biomedical application
318
Corrosion behavior of plasma-sprayed Al2O3–Cr2O3 coatings in hot lithium molten salt
319
Corrosion behavior of polyphenylene sulfide–carbon black–graphite composites for bipolar plates of polymer electrolyte membrane fuel cells
320
Corrosion behavior of polypyrrole coated mild steel
321
Corrosion Behavior of Polypyrrole/Mesoporous Silica Nanocontainers Coatings on the Mild Steel
322
Corrosion behavior of porous chromium carbide in supercritical water
323
Corrosion behavior of PVD-grown WC–(Ti1−xAlx)N films in a 3.5% NaCl solution
324
Corrosion behavior of rare earth cerium based conversion coating on aluminum alloy
325
Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12
326
Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12
327
Corrosion behavior of reinforcement bars embedded in mortar specimens containing ladle furnace slag in partial substitution of aggregate and cement
328
Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume
329
Corrosion behavior of reinforcing steel in concrete for nuclear facilities exposed in high chloride and low pH environment
330
Corrosion Behavior of Rusted 550 MPa Grade Offshore Platform Steel Original Research Article
331
Corrosion behavior of shape memory, superelastic, and nonsuperelastic nickel–titanium-based orthodontic wires at various temperatures
332
Corrosion behavior of silicon nitride bonding silicon carbide in molten magnesium and AZ91 magnesium alloy
333
Corrosion Behavior of Single and Multilayer Coatings Deposited on Ni-Cr Dental Alloy by CAE-PVD Technique in Artificial Saliva
334
Corrosion behavior of some austenitic stainless steels in chloride environments
335
Corrosion behavior of sputtered Cr–Si–Ni and Cr–Si–Ni–Al resistive films in 0.1 M NaOH
336
Corrosion behavior of sputtered Cr–Si–Ni resistive films in acidic and alkaline environments
337
Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride
338
Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride
339
Corrosion behavior of SS316L in simulated and accelerated PEMFC environments
340
Corrosion behavior of steel in simulated concrete pore solutions treated with calcium silicate hydrates
341
Corrosion behavior of steels in flowing lead–bismuth
342
Corrosion behavior of steels in flowing lead–bismuth under abnormal conditions
343
Corrosion behavior of steels in Gulf seawater environment
344
Corrosion behavior of steels in liquid lead–bismuth with low oxygen concentrations
345
Corrosion behavior of superhydrophobic surfaces of Ti alloys in NaCl solutions
346
Corrosion behavior of supermartensitic stainless steel in aerated and CO2-saturated synthetic seawater
347
Corrosion behavior of the laser-brazed joint of TiNi shape memory alloy and stainless steel in artificial saliva
348
Corrosion behavior of the Mg65Cu25Gd10 bulk amorphous alloys
349
Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment
350
Corrosion behavior of three bipolar plate materials in simulated SPE water electrolysis environment
351
Corrosion Behavior of Ti/TiN Multilayer Nanostructured Coatings Applied on AISI 316L by Arc-PVD Method in the Simulated Body Fluid
352
Corrosion behavior of Ti2N thin films in various corrosive environments N. S.
353
Corrosion behavior of Ti3AlC2 in NaOH and H2SO4
354
Corrosion behavior of Ti–5Ag alloy with and without thermal oxidation in artificial saliva solution
355
Corrosion behavior of Ti–6Al–4V alloy treated by plasma immersion ion implantation process
356
Corrosion behavior of Ti-6Al-4V alloy welded by scanning electron beam
357
Corrosion behavior of Ti-6Al-4V alloy welded by scanning electron beam
358
Corrosion behavior of Ti–8Al–1Mo–1V alloy compared to Ti–6Al–4V
359
Corrosion behavior of Ti–Al–N/Ti–Al duplex coating on AZ31 magnesium alloy in NaCl aqueous solution
360
Corrosion behavior of TiN and TiCN coatings synthesized by PVD on the spark plasma sintered NiTi substrate
361
Corrosion behavior of TiN films prepared by vacuum arc deposition and nitrogen ion beam dynamic mixing implantation
362
Corrosion behavior of tin ions implanted zirconium in 1N H2SO4
363
Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution
364
Corrosion behavior of TiN-coated stainless steel as bipolar plate for proton exchange membrane fuel cell
365
Corrosion behavior of TiO2 films on Mg–Zn alloy in simulated body fluid
366
Corrosion behavior of titanium alloy Beta-21S coated with diamond like carbon in Hankʹs solution
367
Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringerʹs solution for bioimplant applications
368
Corrosion behavior of titanium in the presence of calcium phosphate and serum proteins
369
Corrosion behavior of titanium metal in the presence of inhibited sulfuric acid at 50°C
370
Corrosion behavior of titanium nitride coated Ni–Ti shape memory surgical alloy
371
Corrosion behavior of uniaxially cold-pressed Fe2Mo intermetallic in 0.5M H2SO4
372
Corrosion behavior of uniaxially cold-pressed Fe2Mo intermetallic in 0.5M H2SO4
373
Corrosion behavior of vacuum sintered duplex stainless steels
374
Corrosion behavior of weathering steel in marine atmosphere
375
Corrosion behavior of X-70 pipe steel in near-neutral pH solution
376
Corrosion Behavior of Zn-Co Alloy Coating from Acid Sulphate Bath
377
Corrosion behavior of ZnO nanosheets on brass substrate in NaCl solutions
378
Corrosion behavior of Zr alloys with a high Nb content
379
Corrosion behavior of Zr41.2Ti13.8Ni10Cu12.5Be22.5 bulk metallic glass in various aqueous solutions
380
Corrosion behavior of Zr-based metallic glass coating on type 304L stainless steel by pulsed laser deposition method
381
Corrosion behavior of ZrN/Zr coated biomedical AZ91 magnesium alloy
382
Corrosion behavior of ZrO2–SiO2–Al2O3 refractories in lead silicate glass melts
383
Corrosion behavior of β titanium alloys for biomedical applications
384
Corrosion behavior on orthopedic NiTi alloy with nanocrystalline/amorphous surface
385
Corrosion behaviors and contact resistances of the low-carbon steel bipolar plate with a chromized coating containing carbides and nitrides
386
Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy
387
Corrosion behaviors in physiological solution of cerium conversion coatings on AZ31 magnesium alloy
388
Corrosion behaviors of AISI 1025 steels with electroless nickel/aluminized coatings in NaCl-induced hot corrosion
389
Corrosion Behaviors of Ai-Si-Cu-Based Filler Metals and 6061-T6 Brazements
390
Corrosion behaviors of austenitic Fe–30Mn–7Al–xCr–1C alloys in 3.5% NaCl solution
391
Corrosion behaviors of bulk metallic glasses Fe66.7C7.0Si3.3B5.5P8.7Cr2.3Al2.0Mo4.5 having different crystal volume fractions
392
Corrosion behaviors of Cr(N,O)/CrN double-layered coatings by cathodic arc deposition
393
Corrosion behaviors of Cr(N,O)/CrN multi-layered coatings by cathodic arc deposition
394
Corrosion behaviors of low carbon steel, SUS310 and Fe–Mn–Al alloy with hot-dipped aluminum coatings in NaCl-induced hot corrosion
395
Corrosion behaviors of nanocrystalline and conventional polycrystalline copper
396
Corrosion Behaviors of Random and Special Grain Boundaries in a Sensitized 304 Stainless Steel Original Research Article
397
Corrosion behaviors of sputter-deposited steel thin film for electrical resistance sensor material
398
Corrosion behaviors of US steels in flowing lead–bismuth eutectic (LBE)
399
Corrosion behaviour and galvanic coupling with steel of Al-based coating alternatives to electroplated cadmium
400
Corrosion behaviour assessment of lead-free Sn–Ag–M (M = In, Bi, Cu) solder alloys
401
Corrosion behaviour in concrete of three differently galvanized steel bars
402
CORROSION BEHAVIOUR OF 2124 ALUMINIUM ALLOY-SILICON CARBIDE METAL MATRIX COMPOSITES IN SODIUM CHLORIDE ENVIRONMENT
403
Corrosion behaviour of 304 stainless steel in sulphuric acid solutions and its inhibition by some substituted pyrazolones
404
Corrosion behaviour of a dental alloy in some beverages and drinks
405
Corrosion behaviour of a Low Ni austenitic stainless steel in carbonated chloride-polluted alkali-activated fly ash mortar
406
Corrosion behaviour of a new low-nickel stainless steel embedded in activated fly ash mortars
407
Corrosion behaviour of a new low-nickel stainless steel in saturated calcium hydroxide solution
408
Corrosion behaviour of a superelastic Ni–Ti alloy
409
Corrosion behaviour of a superelastic Ni–Ti alloy
410
Corrosion behaviour of a surface-treated AISI H11 hot work tool steel in molten aluminium alloy
411
Corrosion behaviour of AISI 304 stainless steel with Cu coatings in H2SO4
412
Corrosion behaviour of Al based tritium permeation barriers in flowing Pb–17Li
413
Corrosion behaviour of Al–Cu–Fe alloys containing a quasicrystalline phase
414
Corrosion behaviour of AlN for self-cooled Li/V blanket application
415
Corrosion Behaviour of Aluminium Alloy in Palm Oil Methyl Ester (B100)
416
Corrosion behaviour of aluminium in ethyleneglycol–water electrolytes containing phosphonic acid
417
Corrosion behaviour of aluminized martensitic and austenitic steels in liquid Pb–Bi
418
Corrosion behaviour of amorphous Ni–Cr–Nb–P–B bulk alloys in 6M HCl solution
419
Corrosion behaviour of amorphous Ni–Cr–Nb–P–B bulk alloys in 6M HCl solution
420
Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids
421
Corrosion behaviour of blended cements in low and medium strength concretes
422
Corrosion behaviour of carbon materials exposed to molten lithium chloride–potassium chloride salt
423
Corrosion behaviour of carbon S-phase created on Ni-free biomedical stainless steel
424
Corrosion behaviour of chromated Zn and Zn alloy electrodeposits
425
Corrosion behaviour of chromium-free ceramics for liquid slag removal in Pressurized Pulverized Coal Combustion
426
CORROSION BEHAVIOUR OF CLADDING MATERIALS OF RESEARCH REACTOR SPENT FUEL DURING WET STORAGE
427
Corrosion behaviour of cobalt–chromium dental alloys doped with precious metals
428
Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications
429
Corrosion behaviour of construction materials for high temperature steam electrolysers
430
Corrosion behaviour of Duplex stainless steels in organic acid aqueous solutions
431
Corrosion behaviour of electrodeposited and sputtered Cr coatings and sputtered Ta coatings with α and β phases
432
Corrosion behaviour of electrodeposited nanocrystalline Ni–W and Ni–Fe–W alloys
433
Corrosion behaviour of EUROFER in Pb–17Li at 500 °C
434
Corrosion behaviour of Fe–Al(–Ti) alloys in steam
435
Corrosion behaviour of Fe–Mn–Si based shape memory steels trained by cold rolling
436
Corrosion behaviour of Fe–Mn–Si based shape memory steels trained by cold rolling
437
Corrosion behaviour of galvanized steel and electroplating steel in aqueous solution: AC impedance study and XPS
438
Corrosion behaviour of galvannealed steel sheet
439
Corrosion behaviour of innovative stainless steels in mortar
440
Corrosion behaviour of laser gas-nitrided Ti–6Al–4V alloy in nitric acid solution
441
Corrosion behaviour of laser-melted magnesium alloys
442
Corrosion behaviour of low activation steels in flowing Pb–17Li
443
Corrosion behaviour of low-nickel austenitic stainless steels reinforcements: A comparative study in simulated pore solutions
444
Corrosion behaviour of magnesium alloys coated with TiN by cathodic arc deposition in NaCl and Na2SO4 solutions
445
Corrosion behaviour of martensitic and austenitic steels in flowing lead–bismuth eutectic
446
Corrosion behaviour of medical CoCr alloy after nitrogen plasma immersion ion implantation
447
Corrosion behaviour of Mg/Al alloys with composite coatings
448
Corrosion behaviour of Mg-rich Al coatings in the protection of Al alloys
449
Corrosion behaviour of MoSx-based coatings deposited onto high speed steel by magnetron sputtering
450
Corrosion behaviour of nano structured sol-gel alumina coated 9Cr–1Mo ferritic steel in chloride bearing environments
451
Corrosion behaviour of Nd–Fe–B permanent magnetic alloys
452
Corrosion behaviour of Nd–Fe–B permanent magnetic alloys
453
Corrosion behaviour of new stainless steels reinforcing bars embedded in concrete
454
Corrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature
455
Corrosion behaviour of NiCrBSi plasma-sprayed coatings partially melted with laser
456
Corrosion behaviour of Nitinol alloy coated with alkylsilanes and polypyrrole
457
Corrosion behaviour of plasma sprayed coatings
458
Corrosion behaviour of polyrhodanine coated copper electrode in 0.1 M H2SO4 solution
459
Corrosion behaviour of porous Ni-free Ti-based bulk metallic glass produced by spark plasma sintering in Hanksʹ solution
460
Corrosion behaviour of R2O–CaO–SiO2 glasses submitted to accelerated weathering
461
Corrosion behaviour of rare earth ion-implanted hot-dip galvanised steel
462
Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides
463
Corrosion behaviour of reinforced concrete: Laboratory experiments and archaeological analogues for long-term predictive modelling
464
Corrosion behaviour of reinforcing steel exposed to an amino alcohol based corrosion inhibitor
465
Corrosion behaviour of sensitized AISI-type 316L stainless steel in molten carbonate fuel cell in cathode-gas environment
466
Corrosion behaviour of silica hybrid coatings produced from basic catalysed particulate sols by dipping and EPD
467
Corrosion behaviour of single (Ti) and duplex (Ti–TiO2) coating on 304L stainless steel in nitric acid medium
468
Corrosion behaviour of sintered NdFeB coated with Al/Al2O3 multilayers by magnetron sputtering
469
Corrosion behaviour of sintered Nd–Fe–B magnets
470
Corrosion behaviour of Sn-containing oxide layer on AZ91D alloy formed by plasma electrolytic oxidation
471
Corrosion behaviour of sol–gel coatings doped with cerium salts on 2024-T3 aluminum alloy
472
Corrosion behaviour of stainless steels in flowing LBE at low and high oxygen concentration
473
Corrosion behaviour of steel in concentrated phosphoric acid solutions
474
Corrosion behaviour of steel rebars in reinforced concrete containing thermoplastic wastes as aggregates
475
Corrosion behaviour of steel ropes for snow and rockfall barriers
476
Corrosion behaviour of steels after laser surface melting
477
Corrosion behaviour of steels and refractory metals and tensile features of steels exposed to flowing PbBi in the LECOR loop
478
Corrosion behaviour of steels and refractory metals in flowing Lead-Bismuth Eutectic at low oxygen activity
479
Corrosion behaviour of steels in lead–bismuth at 823 K
480
Corrosion Behaviour of Steels in Nigerian Food Processing Environments
481
Corrosion behaviour of superferritic stainless steels cathodically modified with minor additions of ruthenium in sulphuric and hydrochloric acids
482
Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass
483
Corrosion behaviour of the Mg65Y10Cu15Ag10 bulk metallic glass
484
Corrosion behaviour of the protective and decorative TiN coatings on large area steel strips
485
Corrosion behaviour of Ti–15Mo alloy for dental implant applications
486
Corrosion behaviour of Ti40Cu60 alloy in H3PO4 solutions
487
Corrosion behaviour of Ti–Nb–Sn shape memory alloys in different simulated body solutions
488
Corrosion behaviour of titanium in non-aqueous solvents
489
Corrosion behaviour of titanium in the presence of Streptococcus mutans
490
Corrosion behaviour of titanium in the presence of Streptococcus mutans
491
Corrosion behaviour of various model alloys with NaCl–KCl coating
492
Corrosion behaviour of weathering steel in diluted Qinghai salt lake water in a laboratory accelerated test that involved cyclic wet/dry conditions
493
Corrosion behaviour of zinc in sodium perchlorate solutions
494
Corrosion behaviour of zinc–nickel coatings, electrodeposited on steel
495
Corrosion behaviour of zirconia barrier coatings on galvanized steel
496
Corrosion behaviour of Zr1−xTixV0.6Ni1.2M0.2 (M=Ni, Cr, Mn) AB2-type metal hydride alloys in alkaline solution
497
Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel
498
Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel
499
Corrosion Behaviours of Copper Alloy in Solutions Containing Na SO4 AND NaCI with Different Concentrations
500
Corrosion behaviours of two nickel-based coatings in H2S-containing environments
501
Corrosion by bacteria of concrete in sewerage systems and inhibitory effects of formates on their growth
502
Corrosion by chlorides in reinforced concrete: Determination of chloride concentration threshold by impedance spectroscopy
503
Corrosion by galvanic coupling between amalgam and different chromium-based alloys
504
Corrosion by galvanic coupling between carbon fiber posts and different alloys
505
Corrosion characteristic of Ce Al brass in comparison with As Al brass
506
Corrosion characteristics of Alloy AZ63 in buffered neutral solutions
507
Corrosion characteristics of aluminum alloy in bio-ethanol blended gasoline fuel: Part 1. The corrosion properties of aluminum alloy in high temperature fuels
508
Corrosion characteristics of aluminum alloy in bio-ethanol blended gasoline fuel: Part 2. The effects of dissolved oxygen in the fuel
509
Corrosion characteristics of copper and leaded bronze in palm biodiesel
510
Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment
511
Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment
512
Corrosion characteristics of duplex surface-treated spheroidal graphite cast iron
513
Corrosion characteristics of electrochemically prepared phosphate doped polyaniline films in acidic chloride environments
514
Corrosion characteristics of Fe2O3Cr2O3 artificial passivation films under potentiostatic control
515
Corrosion characteristics of Fe2O3Cr2O3 artificial passivation films under potentiostatic control
516
Corrosion characteristics of hybrid Al/SiCp/MgAl2O4 composites fabricated with fly ash and recycled aluminum
517
Corrosion characteristics of low activation ferritic steel, JLF-1, in liquid lithium in static and thermal convection conditions
518
Corrosion characteristics of materials in Pb–Bi under transient temperature conditions
519
Corrosion characteristics of plain carbon steel coated with TiN and ZrN under high-flux ion bombardment
520
Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak
521
Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities
522
Corrosion Characteristics of Zn-TiO2 Nanocomposite Coatings Fabricated by Electro-Codeposition Process
523
Corrosion characterization of durable silver coatings by electrochemical impedance spectroscopy and accelerated environmental testing
524
Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass: An experimental case study
525
Corrosion comparison of galvanized steel and aluminum in aqueous environments
526
Corrosion control by using indirect methods Original Research Article
527
Corrosion control enhancement from a dolomite-amended slow sand filter
528
Corrosion control in electric power systems
529
Corrosion control methods in supercritical water oxidation and gasification processes
530
Corrosion Control of Aluminium Alloy in Alkaline Solution Using Leave Extract of Plumbago Europaea
531
Corrosion control of steel components exposed to thermal cycling using radioactive tracers
532
Corrosion cracking prediction updating of deteriorating RC structures using inspection information
533
Corrosion cracking prediction updating of deteriorating RC structures using inspection information
534
Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments
535
Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment
536
Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics
537
Corrosion detection and control
538
Corrosion detection in aircraft by X-ray backscatter methods
539
Corrosion detection of reinforced concrete beams with wavelet analysis
540
Corrosion Detection of Steel Cables using Time Domain Reflectometry
541
Corrosion due to differential aeration reconsidered
542
Corrosion effect on the electrochemical properties of LaNi3.55Mn0.4Al0.3Co0.75 and LaNi3.55Mn0.4Al0.3Fe0.75 negative electrodes used in Ni–MH batteries
543
Corrosion effects between molten salts and thermal storage material for concentrated solar power plants
544
Corrosion effects of RME in blends with ULSD on aluminium and copper
545
Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings
546
Corrosion Effects on the I-V Characteristics of Electrically Conducting Cables
547
Corrosion evaluation of one dry desulfurization equipment – Circulating fluidized bed boiler
548
Corrosion evaluation of Ti–48Al–2Cr–2Nb (at.%) in Ringer’s solution
549
Corrosion evaluation of traditional and new bronzes for artistic castings
550
Corrosion evaluation of wear tested nitinol wire
551
Corrosion experiment in the first liquid metal LiPb loop of China
552
Corrosion experiments and materials developed for the Japanese HLM systems
553
Corrosion experiments in flowing LBE at 450 °C
554
Corrosion experiments of steels in flowing Pb at 500 °C and in flowing LBE at 450 °C
555
Corrosion failure analysis of galvanized steel pipes in a water irrigation system
556
Corrosion failure analysis of high strength grade super 13Cr-110 tubing string
557
Corrosion failure analysis of L485 natural gas pipeline in CO2 environment
558
Corrosion failure analysis of pure nickel thermocouple sheath used in BaTiO3 hydrothermal synthesis reactor
559
Corrosion failure analysis of spent caustic drainage line pipe
560
Corrosion failure analysis of stainless steel components for maleic anhydride plant
561
Corrosion failure analysis of the condensate collector vessel head of evaporation system in ethylene glycol device
562
Corrosion failure due to flux residues in an electronic add-on device
563
Corrosion failure investigation of seamless stainless steel tube used in die-casting machine of Mg alloy
564
Corrosion failure of Zn–Al detonator housing
565
Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine
566
Corrosion failures of AISI type 304 stainless steel in a fertiliser plant
567
Corrosion failures of high temperature heat pipes
568
Corrosion fatigue and multiple site damage reliability analysis
569
Corrosion fatigue behavior of a biocompatible ultrafine-grained niobium alloy in simulated body fluid
570
Corrosion fatigue behavior of conversion coated and painted AZ61 magnesium alloy
571
Corrosion fatigue behavior of conversion coated AZ61 magnesium alloy
572
Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy
573
Corrosion fatigue behavior of extruded magnesium alloy AZ31 in sodium chloride solution
574
Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments
575
Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5% NaCl environment
576
Corrosion fatigue behavior of low alloy steels under simulated BWR coolant conditions
577
Corrosion fatigue behavior of magnesium alloys under oil environments
578
Corrosion fatigue behaviors of HSB800 and its HAZs in air and seawater environments
579
Corrosion fatigue behaviors of steel wires used in coalmine
580
Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – In simulated body fluid
581
Corrosion fatigue behaviour and fracture mechanisms in nitrided low alloy steel
582
Corrosion fatigue behaviour of a 15Cr-6Ni precipitation-hardening stainless steel in different tempers
583
Corrosion fatigue behaviour of aluminium alloy 6061-T651 welded using fully automatic gas metal arc welding and ER5183 filler alloy
584
Corrosion fatigue behaviour of high V–Cr–Ni cast irons in 3%NaCl aqueous solution
585
Corrosion fatigue behaviour of ion nitrided AISI 4140 steel
586
Corrosion fatigue behaviour of ion nitrided AISI 4140 steel
587
Corrosion fatigue crack growth behavior of 7075-T6 under biaxial tension–tension cyclic loading condition
588
Corrosion fatigue crack growth behavior of nickel base alloys in sodium thiosulfate solution
589
Corrosion fatigue crack growth behavior of nickel base alloys in sodium thiosulfate solution
590
Corrosion fatigue crack growth of AISI 4340 steel
591
Corrosion fatigue crack initiation in 12% chromium stainless steel
592
Corrosion fatigue crack initiation in 12% chromium stainless steel
593
Corrosion fatigue crack initiation of Al–Zn–Mg–Mn alloy in 0.5 M Na2SO4 solution
594
Corrosion fatigue crack initiation of Al–Zn–Mg–Mn alloy in 0.5 M Na2SO4 solution
595
Corrosion fatigue crack propagation in a heat affected zone of high-performance steel in an underwater sea environment
596
Corrosion fatigue crack propagation of a duplex stainless steel X6
597
Corrosion fatigue cracking of AISI 316L stainless steel screen mesh
598
Corrosion fatigue cracking of tube coils in an actifier column catalytic cracker
599
Corrosion fatigue effects on life estimation of deteriorated bridges under vehicle impacts
600
CORROSION FATIGUE FRACTURE BEHAVIOUR OF A SiC WHISKER–ALUMINIUM MATRIX COMPOSITE UNDER COMBINED TENSION–TORSION LOADING
601
Corrosion fatigue life prediction of a steel shaft material in seawater
602
Corrosion Fatigue Life Prediction of Aircraft Structure Based on Fuzzy Reliability Approach
603
CORROSION FATIGUE MODELING VIA DIFFERENTIAL INFRARED THERMOGRAPHY
604
Corrosion fatigue of a 12%Cr low pressure turbine blade steel in simulated service environments
605
Corrosion fatigue of bio-ceramic sapphire in isotonic sodium chloride solution
606
Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation
607
Corrosion fatigue of cemented carbide cutting tool materials
608
Corrosion fatigue of cemented carbide cutting tool materials
609
Corrosion fatigue of extruded magnesium alloys
610
Corrosion fatigue of extruded magnesium alloys
611
Corrosion fatigue phenomena learned from failure analysis
612
Corrosion film breakdown of galvanized steel in sulphate–chloride solutions
613
Corrosion in a buried pressurised water pipeline
614
Corrosion in high-temperature and supercritical water and aqueous solutions: a review
615
Corrosion in HVDC valve cooling systems
616
Corrosion in Polyethylene Coatings Case Study: Cooling Water Pipelines
617
Corrosion in supercritical CO2 by diffusion of flue gas acids and water
618
Corrosion in waste-fired boilers: A thermodynamic study
619
Corrosion in water supply pipe stainless steel 304 and a supply line of helium in stainless steel 316
620
Corrosion induced degradation of textured YBCO under operation in high humidity conditions
621
Corrosion induced failure of an air cylinder
622
Corrosion influence on bond in reinforced concrete
623
Corrosion influenced by biofilms during wet nuclear waste storage
624
Corrosion inhibiting action of tetramethyl-dithia-octaaza-cyclotetradeca-hexaene (MTAH) on corrosion of mild steel in hot 20% sulfuric acid
625
Corrosion Inhibition Activity of Cefixime on Mild Steel Surface in Aqueous Sulphuric Acid
626
Corrosion Inhibition and Adsorption Behavior of 1-(1-Naphthalenylmethyl)quinolinium Chloride on Mild Steel in Hydrochloric Acid Medium
627
Corrosion Inhibition and Adsorption Behavior of 5-(phenylthio)-3H-pyrrole-4-carbonitriles on Mild Steel Surface in 1M H2SO4: Experimental and Computational Approach
628
Corrosion inhibition and adsorption behavior of methionine on copper in HCl and synergistic effect of zinc ions
629
Corrosion inhibition and adsorption behavior of new Schiff base surfactant on steel in acidic environment: Experimental and theoretical studies
630
Corrosion inhibition and adsorption behavior of phytic acid on Pb and Pb–In alloy surfaces in acidic chloride solution
631
Corrosion inhibition and adsorption behaviour for aluminuim by extract of Aningeria robusta in HCl solution: Synergistic effect of iodide ions
632
Corrosion inhibition and Biocidal effect of some cationic surfactants based on Schiff base
633
Corrosion Inhibition and Dezincification of Brass in % 3 NaCl Solution by 3-Phenyl-1.2.4- Triazol-5-Thione
634
CORROSION INHIBITION BEHAVIOR OF N,N′-BIS(2,4,6- TRIHYDROXYACETOPHENONE)-PROPANDIIMINE ON ST44.0 STEEL IN ALKALINE NACL SOLUTION
635
Corrosion inhibition behavior of propyl phosphonic acid–Zn2+ system for carbon steel in aqueous solution
636
Corrosion Inhibition Behaviour of Enantia chlorantha Extract on Pipeline Steel Corrosion in Acidic System
637
Corrosion inhibition by aniline oligomers through charge transfer: a DFT approach
638
Corrosion inhibition by fatty acid oxadiazoles for oil well steel (N-80) and mild steel
639
CORROSION INHIBITION BY HEDP-Zn(2+) SYSTEM FOR MILD STEEL IN LOW CHLORIDE MEDIA
640
Corrosion inhibition by phosphonic acid -Zn^2+ systems for mild steel in chloride medium
641
Corrosion Inhibition by Piliostigma Thoningii Extract on Mild Steel in Acidic Environment: RSM and Molecular Modeling Approach
642
Corrosion inhibition effect and adsorption behaviour of nicotinamide derivatives on mild steel in hydrochloric acid solution
643
Corrosion Inhibition Effect of Ester Containing Cationic Gemini Surfactants on Low Carbon Steel
644
Corrosion Inhibition Effect of Substituted Quinoline and Its Condensation Products on Mild Steel in Acidic Media
645
Corrosion inhibition effect of tetramines for mild steel in 1M HCl
646
Corrosion inhibition effectiveness of zeolite ZSM-5 coating on mild steel against various organic acids and its antimicrobial activity
647
Corrosion Inhibition Effects of Some New Synthesized N-Aroyl-N-Aryl thiourea Derivatives for Carbon Steel in Sulfuric Acid Media
648
Corrosion inhibition efficiency of nonionic Schiff base amphiphiles of p-aminobenzoic acid for aluminum in 4N HCL
649
Corrosion Inhibition Mechanism of Rare Earth Metal on LC4 Al Alloy with Split Cell Technique
650
Corrosion Inhibition of 302 Stainless Steel with Schiff Base Compounds
651
Corrosion Inhibition of 5-Methyl-2H-imidazol-4-carboxaldehyde and 1H-Indole-3- carboxyaldehyde on Mild Steel in 1.0 M HCl: Gravimetric Method and DFT Study
652
Corrosion inhibition of 6061 Al–15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone
653
Corrosion Inhibition of A 106 Gr B Carbon Steel by Thapsia Garganica Extracts in 1 M Hydrochloric Acid
654
Corrosion Inhibition of AISI 304 Stainless Steel using Zinc Nitride Coating
655
Corrosion inhibition of Al–B4C metal matrix composites in a NaCl solution by benzotriazole
656
Corrosion inhibition of Al-Mg alloy in hydrochloric acid using Benzylamine- N-(p-methoxy benzylidene)
657
Corrosion Inhibition of Al-Si-Cu Alloy in the Basic Media by Using Six Inhibitors at Four Temperatures
658
Corrosion inhibition of aluminium alloys by tolyltriazole in chloride solutions
659
Corrosion inhibition of aluminium by rare earth chlorides
660
Corrosion Inhibition of Aluminium in Acidic Medium using Amino Acid (Methionine)
661
Corrosion inhibition of aluminium–brass in 3.5% NaCl solution and sea water
662
Corrosion inhibition of aluminum alloy in chloride mediums by undoped and doped forms of polyaniline
663
Corrosion inhibition of aluminum by 1,1(lauryl amido)propyl ammonium chloride in HCl solution
664
Corrosion Inhibition of Aluminum in Hydrochloric Acid Medium by Essential Oil of Eucalyptus camaldulensis and Myrtus Communis
665
Corrosion inhibition of aluminum in hydrochloric acid solution by alkylimidazolium ionic liquids
666
Corrosion Inhibition of API 5L Carbon Steel by Nettle Leaves Hydroalcoholic Extract in a 0.5 M H2SO4 Solution
667
Corrosion Inhibition of Brass in 3% NaCl Solution by Electrosynthesized Poly 4- amino-3-méthyl-1,2,4-triazole-5-thione
668
Corrosion inhibition of carbon steel and antibacterial properties of aminotris-(methylenephosphonic) acid
669
Corrosion inhibition of carbon steel in 1 M H2SO4 solution by Thapsia villosa extracts
670
Corrosion Inhibition of Carbon Steel in 1 M HCl using Monopolar Surfactants Derived From 3-Methyl-1,2,4- Triazole-5-Thione
671
Corrosion Inhibition of Carbon Steel in SULFIRAN® Process
672
Corrosion inhibition of carbon-steels by propargyltriphenylphosphonium bromide in H2SO4 solution
673
Corrosion Inhibition of Copper and Its Alloys Using Benzotriazole
674
Corrosion Inhibition of Copper by Ephedra Sarcocarpa Plant Extract as Green Corrosion Inhibitor in Strong Acidic Medium
675
Corrosion inhibition of copper by new triazole phosphonate derivatives
676
Corrosion Inhibition of Copper in Acid Medium by Drugs: Experimental and Theoretical Approaches
677
Corrosion inhibition of H-11 type carbon steel in 1 M hydrochloric acid solution by N-propyl amino lauryl amide and its ethoxylated derivatives
678
Corrosion Inhibition of inconel (600) In Sodium Chloride solution by Sodium sulphate
679
Corrosion inhibition of indole-3-acetic acid on mild steel in 0.5 M HCl
680
Corrosion inhibition of iron by amphoteric surfactants in hydrochloric acid solutions
681
Corrosion inhibition of iron in 1 M HCl solution with Schiff base compounds and derivatives
682
Corrosion inhibition of iron in 1M HCl by 1-phenyl-5-mercapto-1,2,3,4-tetrazole
683
Corrosion inhibition of iron in 20% hydrochloric acid by 1,4/1,6-bis(α-octylpyridinium)butane/hexane dibromide
684
Corrosion inhibition of iron in acidic solutions by alkyl quaternary ammonium halides: Correlation between inhibition efficiency and molecular structure
685
Corrosion Inhibition of Iron Using Silicate Base Molecules: A Computational Study
686
Corrosion Inhibition of Mild Steel by Ethanol Extract of Bitter Leaf (Vernonia Amygdalina): Effects of Inhibitor Concentration and Time
687
Corrosion inhibition of mild steel by some pyrazole derivatives in aqueous HCI solutions
688
Corrosion inhibition of mild steel by some schiff base compounds in hydrochloric acid
689
Corrosion inhibition of mild steel in 1 M sulfuric acid solution using anionic surfactant
690
Corrosion inhibition of mild steel in acid solutions by some aromatic oxadiazoles
691
Corrosion inhibition of mild steel in acidic media by [BMIm]Br Ionic liquid
692
Corrosion inhibition of mild steel in acidic media using newly synthesized heterocyclic organic molecules
693
Corrosion Inhibition of Mild Steel in Acidic Solution by Apricot Gum as a Green Inhibitor
694
Corrosion Inhibition of Mild Steel in HCl Solution by 2-acetylpyrazine: Weight Loss and DFT Studies on Immersion Time and Temperature Effects
695
Corrosion inhibition of mild steel in hydrochloric acid by some aromatic hydrazides
696
Corrosion inhibition of mild steel in hydrochloric acid solution by a mercapto-triazole compound
697
Corrosion Inhibition of Mild Steel in Sulphuric Acid Medium by Kovac’s Reagent
698
corrosion inhibition of mild steel surface by isoxazoles in hcl solution: electrochemical studies
699
Corrosion inhibition of mild steel with Schiff base compounds in 1 M HCl
700
Corrosion inhibition of mildsteel in 1 M HCl solution by Artemisia Abrotanum essential oil as an eco-friendly inhibitor
701
Corrosion inhibition of N-80 steel and mild steel in 15% boiling hydrochloric acid by a triazole compound — SAHMT
702
Corrosion inhibition of nickel in H2SO4 solution by alanine
703
Corrosion inhibition of polyaniline and poly(o-methoxyaniline) on stainless steels
704
Corrosion inhibition of powder metallurgy Mg by fluoride treatments
705
Corrosion inhibition of pure iron in 0.5 M H2SO4 solutions by ethanolamines
706
Corrosion Inhibition of SiCp/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment
707
Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface
708
Corrosion inhibition of stainless steel type AISI 304 by Mn coating and subsequent annealing with flow of nitrogen at different temperatures
709
Corrosion inhibition of steam generator tubesheet by Alloy 690 cladding in secondary side environments
710
Corrosion inhibition of steel in 0.5 M H2SO4 by [(2-pyridin-4-ylethyl)thio]acetic acid
711
Corrosion inhibition of steel in concrete with natural inorganic minerals in corrosive environments due to chloride attack
712
CORROSION INHIBITION OF STEEL IN COOLING WATER SYSTEM BY 2-PHOSPHONOBUTANE-1,2,4-TRICARBOXYLIC ACID AND POLYVINYLPYRROLIDONE
713
Corrosion inhibition of steel in sulphuric acid by pyrrolidine derivatives
714
Corrosion inhibition of thiourea and thiadiazole derivatives : A Review
715
Corrosion Inhibition of Water Hyacinth on 1014 Steel in a Chloride Environment
716
Corrosion inhibition of Zinc by Imidazol in Acidic Media
717
CORROSION INHIBITION OF ZINC IN HYDROCHLORIC ACID MEDIUM BY THIOUREA AND GUANIDIN
718
CORROSION INHIBITION OF ZINC IN HYDROCHLORIC ACID MEDIUM USING UREA INHIBITOR
719
Corrosion inhibition of zinc in hydrochloric acid solution using Ampicillin
720
Corrosion Inhibition of Zinc Metal in 2M Hydrochloric Acid Solution by Using GuaifenesinDrug as an Inhibitor and Theoretical Calculations
721
Corrosion Inhibition of Zinc Metal in Hydrochloric acid Solution by Using Ciprofloxacin Drug as an Inhibitor
722
Corrosion inhibition performance of three imidazole derivatives on mild steel in 1 M phosphoric acid
723
Corrosion Inhibition Potential of Benue Propolis Extracts on Carbon Steel in 1.0 M Hydrochloric Acid Medium: Experimental and Computational Studies
724
Corrosion Inhibition Potential of Mentha spicata Extract on Mild Steel in Acidic Medium
725
Corrosion Inhibition Potential of Prosopis Juliflora Leaves Extract on Mild Steel in H2SO4 Solutions
726
Corrosion Inhibition Propargyl Alcohol on Low Alloy Cr Steel in 0.5 M H_2SO-4 in the Absence and Presence of Potassium Iodide
727
Corrosion Inhibition Properties of Sulfonated Polyaniline-Poly(Vinyl Alcohol) Composite on Mild Steel
728
Corrosion Inhibition Studies of Ecbolium Viride Extracts on Mild Steel in HCl
729
Corrosion Inhibition Studies of Ecbolium Viride Extracts on Mild Steel in HCl
730
Corrosion Inhibition Studies on the Influence of Colocasia esculenta Leaves Extract on Mild Steel in 1.0 M HCl.
731
Corrosion Inhibition Study of 5, 5-diphenylimidazolidine-2, 4-dione for Mild Steel Corrosion in 1 M HCl Solution: Experimental, Theoretical Computational and Monte Carlo Simulations Studies
732
Corrosion inhibition, hydrogen evolution and antibacterial properties of newly synthesized organic inhibitors on 316L stainless steel alloy in acid medium
733
Corrosion inhibitive action of cysteine on Cu–30Ni alloy in aerated 0.5 M H2SO4
734
Corrosion Inhibitive Behaviour of the Natural Honey in Acidic Medium of A315 Mild and 304 Austenitic Stainless Steels
735
Corrosion Inhibitive Potentials of Some Amino Acid Derivatives of 1,4-Naphthoquinone–DFT Calculations
736
CORROSION INHIBITIVE PROPERTIES OF EXTRACT OF JATROPHA CURCAS LEAVES ON MILD STEEL IN HYDROCHLORIC ACID ENVIRONMENT
737
Corrosion inhibitive properties of some new isatin derivatives on corrosion of N80 steel in 15% HCl
738
Corrosion inhibitor for the chemical decontamination of primary coolant systems of nuclear power plants
739
Corrosion inhibitor interaction at hydrate–oil interfaces from differential scanning calorimetry measurements
740
Corrosion inhibitor of some surfactants derived from maleic-oleic acid adduct on mild steel in 1 M H2SO4
741
Corrosion Inhibitor Potential of Four Phenyltetrazoles Derivatives using Density Functional Theory and Quantitative Structure-Activity Relationships Approach
742
Corrosion Inhibitor Release from Zn-Al-[PO43-]-[CO32-] Layered Double Hydroxide Nanoparticles
743
Corrosion inhibitor storage and release property of TiO2 nanotube powder synthesized by rapid breakdown anodization method
744
Corrosion inhibitors and other protective systems in concrete repair: concepts or misconcepts
745
Corrosion inhibitors based on chitosan-heptanoate modified beidellite
746
Corrosion inhibitors for anodised aluminium
747
Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures
748
Corrosion inhibitors for steel in concrete: State-of-the-art report
749
Corrosion inhibitors in concrete: Part III. Effect on time to chloride-induced corrosion initiation and subsequent corrosion rates of steel in mortar
750
Corrosion inhibitors in reinforced concrete structures Part 1: Preventative technique
751
Corrosion inhibitors’ effect on design service life of RC structures
752
Corrosion inhibitory action of ethanol extract from Bagassa guianensis on the corrosion of zinc in ASTM medium
753
Corrosion initiation of reinforced concretes based on Portland or GGBS cements: Chloride contents and electrochemical characterizations versus time
754
Corrosion Investigation of A516-Gr70 and API 5LX70 Steels in H2S Containing Solution
755
Corrosion investigation of Cu–Ni tube desalination plant Original Research Article
756
Corrosion Investigations Due to Increased Sulfidity in Digester House of Paper Mill
757
Corrosion investigations of Al–Fe-coated steels, high Cr steels, refractory metals and ceramics in lead alloys at 700 °C
758
Corrosion investigations of steels in flowing lead at 400°C and 550°C
759
Corrosion issues in nuclear waste disposal
760
Corrosion issues of powder coated AA6060 aluminium profiles
761
Corrosion kinetics and topography analysis of Ti–6Al–4V alloy subjected to different mouthwash solutions
762
Corrosion kinetics of a directionally solidified Ni-base superalloy Original Research Article
763
Corrosion kinetics of battery zinc alloys in electrolyte solutions
764
Corrosion kinetics of Steel T91 in flowing oxygen-containing lead–bismuth eutectic at 450 °C
765
Corrosion kinetics under high pressure of steam of pure zirconium and zirconium alloys followed by in situ thermogravimetry
766
Corrosion management of PbCaSn alloys in lead-acid batteries: Effect of composition, metallographic state and voltage conditions
767
Corrosion measurements of steel reinforcement in concrete exposed to a tropical marine atmosphere
768
Corrosion mechanism and model of pulsed DC microarc oxidation treated AZ31 alloy in simulated body fluid
769
Corrosion mechanism applicable to biodegradable magnesium implants
770
Corrosion mechanism of borosilicate sealing glasses in molten carbonates studied by impedance spectroscopy
771
Corrosion mechanism of laser-melted AA 2014 and AA 2024 alloys
772
Corrosion mechanism of N-containing Fe–Cr–Mo–Y–C–B bulk amorphous alloys in highly concentrated HCl solution
773
Corrosion mechanism of NiCrBSi coatings deposited by HVOF
774
Corrosion mechanism of polycrystalline corundum and calcium hexaluminate by calcium silicate slags
775
Corrosion mechanism of Ti–Cr alloys in solution containing fluoride
776
Corrosion mechanisms in reinforced concrete by acoustic emission
777
Corrosion mechanisms of Al2O3/MgAl2O4 by V2O5, NiO, Fe2O3 and vanadium slag Review Article
778
Corrosion mechanisms of austenitic stainless steels in nitric media used in reprocessing plants
779
Corrosion mechanisms of low porosity ZrO2 based materials during near net shape steel casting
780
Corrosion mitigation of the oil well steels using organic inhibitors – A review
781
Corrosion monitoring of steel in concrete by galvanostatic pulse technique
782
Corrosion morphology and cave wall alteration in an Alpine sulfuric acid cave (Kraushِhle, Austria)
783
Corrosion of 15-5PH H1025 stainless steel due to environmental conditions
784
Corrosion of 15th and early 16th century stained glass from the monastery of Batalha studied with external ion beam
785
Corrosion of 304L stainless steel and chrome-plated drainage together with the ordinary black rubber and brass gaskets by stagnant solutions of sodium hypochlorite solutions
786
Corrosion of a 3D-C/SiC composite in salt vapor environments Original Research Article
787
Corrosion of a stainless steel chemical hood
788
Corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite in a combustion environment
789
Corrosion of AISI 316 Ti in 50% KOH due to deformation induced martensite
790
Corrosion of alkali–borosilicate waste glass K-26 in non-saturated conditions
791
Corrosion of Alloy 617 in high-temperature gas environments
792
Corrosion of Alloy 690 process pot by sulfate containing high level radioactive waste at feed stage
793
Corrosion of Alloy Steel in 30% Ethylene Glycol Solution and CrO24 Under Hydrodynamic Condition Original Research Article
794
Corrosion of alloys used in dentistry: A review
795
Corrosion of alumina and mullite hot gas filter candles in gasification environment
796
Corrosion of alumina-forming austenitic steel Fe–20Ni–14Cr–3Al–0.6Nb–0.1Ti in supercritical water
797
Corrosion of aluminium components studied with MIES, UPS and XPS
798
Corrosion of aluminium metal in OPC- and CAC-based cement matrices
799
Corrosion of aluminum at high voltages in non-aqueous electrolytes containing perfluoroalkylsulfonyl imides; new lithium salts for lithium-ion cells
800
Corrosion of aluminum oxynitride based ceramics by molten steel
801
Corrosion of amalgams under sliding wear
802
Corrosion of amorphous and nanocrystalline Zr-based alloys
803
Corrosion of amorphous and nanocrystalline Zr-based alloys
804
Corrosion of an aircraft radar antenna waveguide
805
Corrosion of an amorphous indium tin oxide film on polyethylene terephthalate at low concentrations of acrylic acid
806
Corrosion of anode current collectors in molten carbonate fuel cells
807
Corrosion of Au particles in air-exposed NaI-treated Au colloidal suspensions
808
Corrosion of austenitic steel in leakage lithium
809
Corrosion of AZS and AZ crucibles in contact with a blast-furnace slag-based glass
810
Corrosion of Ba1−xSrxCo1−yFeyO3−δ and La0.3Ba0.7Co0.2Fe0.8O3−δ materials for oxygen separating membranes under Oxycoal conditions
811
Corrosion of basaltic pumice, colemanite, barite and blast furnace slag coated rebars in concretes
812
Corrosion of Be-based fusion-specific waste materials
813
Corrosion of biological origin observed on concrete digestors
814
Corrosion of brass in a marine environment: mineral products and their relationship to variable oxidation and reduction conditions
815
Corrosion of cadmium plating by runway de-icing chemicals in cyclic tests: Effects of chemical concentration and plating quality
816
Corrosion of cadmium plating by runway de-icing chemicals: Study of surface phenomena and comparison of corrosion tests
817
Corrosion of calcite crystals by metal-rich mud in caves: Study case in Crovassa Ricchi in Argento Cave (SW Sardinia, Italy)
818
Corrosion of carbon steel caustic header in the presence of chloride ions
819
Corrosion of carbon steel in compacted bentonite and its effect on neptunium diffusion under reducing condition
820
Corrosion of carbon steel with NaCl coating in an atmosphere produced by burning emulsified diesel oil
821
Corrosion of central heating systems
822
Corrosion of Ceramic Matrix Composites
823
Corrosion of ceramics for vinasse gasification in supercritical water
824
Corrosion of concrete sewers—The kinetics of hydrogen sulfide oxidation
825
Corrosion of condenser tube materials in distilled water
826
Corrosion of copper electrode in sodium sulfide solution
827
Corrosion of copper-nickel alloys in pure water
828
Corrosion of copper-nickel alloys in simulated vapourside environments Original Research Article
829
Corrosion of Cr bearing low alloy pipeline steel in CO2 environment at static and flowing conditions
830
Corrosion of CrN and CrN/TiN coated heat-resistant steels in molten A356 aluminum alloy
831
Corrosion of Cr–Ni–Mo steel implants electrically stimulated
832
Corrosion of dental aluminium bronze in neutral saline and saline lactic acid
833
Corrosion of dental metallic materials by dental treatment agents
834
Corrosion of ductile iron exhaust brake housing in heavy diesel engines
835
Corrosion of E-glass fiber in simulated oilfield environments
836
Corrosion of electrocast AZS refractories by CAS glass–ceramics melting
837
Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation
838
Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests
839
Corrosion of Fe9Cr1Mo steel in stagnant liquid lead–lithium eutectic
840
Corrosion of ferritic–martensitic steel HT9 in supercritical water
841
Corrosion of ferritic–martensitic steels in the eutectic Pb–17Li
842
Corrosion of flexible waveguides
843
Corrosion of Galvanized Strips in Florida Reinforced Earth Walls
844
Corrosion of graphite in industrial phosphoric acid
845
Corrosion of high alumina and near stoichiometric spinels in iron-containing silicate slags
846
Corrosion of high burn-up structured UO2 fuel in presence of dissolved H2
847
Corrosion of high temperature metallic materials in VHTR
848
Corrosion of highly coercive, highly textured Nd-Fe-B films
849
Corrosion of HIPed β-Si6−zAlzOzN8−z (z =0, 1, 2, 3) ceramics by NaCl vapor
850
Corrosion of intra-oral magnets by multi-species biofilms in the presence and absence of sucrose
851
Corrosion of intra-oral magnets in the presence and absence of biofilms of Streptococcus sanguis
852
Corrosion of iron and low alloyed steel within a water saturated brick of clay under anaerobic deep geological disposal conditions: An integrated experiment
853
Corrosion of iron by a perfluorpolyalkylether identified by Mössbauer spectroscopy
854
Corrosion of iron: A study for radioactive waste canisters
855
Corrosion of irradiated MOX fuel in presence of dissolved H2
856
Corrosion of lead and lead alloys: influence of the active mass and of the polarization conditions
857
Corrosion of low-antimony lead–cadmium alloys in conditions of long-term polarization
858
Corrosion of low-carbon cast steel in concentrated synthetic groundwater at 80 to 150°C
859
Corrosion of magnesia–chrome brick in molten MgO–Al2O3–SiO2–CaO–FetO slag
860
Corrosion of magnesium alloy AZ31 screws is dependent on the implantation site
861
Corrosion of magnetic recording heads and media
862
Corrosion of manganese in sulfur dioxide at high temperatures
863
Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications
864
Corrosion of metal and polymer containers for use in PCM cold storage
865
Corrosion of metal bipolar plates for PEM fuel cells: A review
866
Corrosion of metal iron in contact with anoxic clay at 90 °C: Characterization of the corrosion products after two years of interaction
867
Corrosion of metallic interconnects for SOFC in fuel gases
868
Corrosion of metallic stack components in molten carbonates: Critical issues and recent findings
869
Corrosion of Metals and Alloys in High Radiation Fields
870
Corrosion of metals physicochemical principles and current problems: Helmut Kaesche, Springer-Verlag, 2003, 594 pages, 338 figures, ISBN 3-540-00626-5, US list price $159
871
Corrosion of nickel ferrite refractory by Na3AlF6–AlF3–CaF2–Al2O3 bath
872
Corrosion of nickel in molten LiCl–Li2O at 750 °C
873
Corrosion of nickel-based dental casting alloys
874
Corrosion of Ni-Ti Rotary Instruments: A Review
875
Corrosion of ODS steels in lead–bismuth eutectic
876
Corrosion of oxide bonded silicon carbide refractories by molten salts in solid waste-to-energy facilities
877
Corrosion of oxide dispersion strengthened iron–chromium steels and tantalum in fluoride salt coolant: An in situ compatibility study for fusion and fusion–fission hybrid reactor concepts
878
Corrosion of Pb–Ca–Sn alloy during potential step cycles
879
Corrosion of pressureless sintered ZrB2–MoSi2 composite in H2SO4 aqueous solution
880
Corrosion of Prestrained Reinforcement Steel
881
Corrosion of Pure Titanium Sternal Wire
882
Corrosion of rapidly solidified neodymium-iron-boron (NdFeB) permanent magnets and protection via sacrificial zinc coatings
883
Corrosion of rapidly solidified neodymium-iron-boron (NdFeB) permanent magnets and protection via sacrificial zinc coatings
884
Corrosion of rebar in concrete under cyclic freeze–thaw and Chloride salt action
885
Corrosion of reduced activation ferritic martensitic steel JLF-1 in purified Flinak at static and flowing conditions
886
Corrosion of reinforced concrete in a tropical marine environment and in accelerated tests
887
Corrosion of reinforcement in concrete repair
888
Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride
889
Corrosion of screw joints of diffusionally zinc-plated pump-compressor pipes.
890
Corrosion of selected ceramic materials in hot gas environment
891
Corrosion of Si3N4-ceramics in aqueous solutions Part I: Characterisation of starting materials and corrosion in 1 N H2SO4
892
Corrosion of Si3N4-ceramics in aqueous solutions: Part 2. Corrosion mechanisms in acids as a function of concentration, temperature and composition
893
Corrosion of Si3N4–MoSi2 ceramic composite in acid- and basic-aqueous environments: surface modification and properties degradation
894
Corrosion of SiC monofilament/Ti-15-3-3-3 metal-matrix composites in 3.15 wt.% NaCl
895
Corrosion of SiC monofilament/Ti-15-3-3-3 metal-matrix composites in 3.15 wt.% NaCl
896
Corrosion of silicon carbide hot gas filter candles in gasification environment
897
Corrosion of silicon nitride in aqueous acidic solutions: penetration monitoring
898
Corrosion of silicon nitride materials in acidic and basic solutions and under hydrothermal conditions
899
Corrosion of silicon nitride materials in gas turbine environment
900
Corrosion of Sn–Co alloy in alkaline media and the effect of Cly and Bry ions
901
Corrosion of soda lime silicate glasses co-doped with Gd2O3 and Y2O3
902
Corrosion of spinel clinker by CaO–Al2O3–SiO2 ladle slag
903
Corrosion of stainless steels in lead–bismuth eutectic up to 600 °C
904
Corrosion of steel bars in OPC mortar exposed to NaCl, MgCl2 and CaCl2: Macro- and micro-cell corrosion perspective
905
Corrosion of steel bars induced by accelerated carbonation in low and high calcium fly ash geopolymer concretes
906
Corrosion of steel fibre reinforced concrete from the cracks
907
Corrosion of steel rebar embedded in natural pozzolan based mortars exposed to chlorides
908
Corrosion of steel reinforcement in concrete of different compressive strengths
909
Corrosion of Steel Reinforcement in Mortar exposed to Hydrogen Sulphide, Part 2: Diffusion Tests
910
Corrosion of Steel Reinforcement in Mortar Specimens exposed to Hydrogen Sulphide, Part 1: Impressed Voltage and Electrochemical Potential Tests
911
Corrosion of steel reinforcements embedded in FRP wrapped concrete
912
Corrosion of Steel Reinforcements in Fly Ash- and Kaolin-based Geopolymer Concrete Immersed in Distilled Water and ASTM Seawater
913
Corrosion of steels with surface treatment and Al-alloying by GESA exposed in lead–bismuth
914
Corrosion of superheater materials in a waste-to-energy plant
915
Corrosion of technical materials in the presence of biofilms—current understanding and state-of-the art methods of study
916
Corrosion of ternary carbides by molten lead
917
Corrosion of the AlFeNi alloy used for the fuel cladding in the Jules Horowitz research reactor
918
Corrosion of the crystalline phases of matte glazes in aqueous solutions
919
Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam
920
Corrosion of three experimental AgMn-based casting alloys
921
Corrosion of Ti-2 and Ti-7 relevant to nickel acid leach chemistry
922
Corrosion of tin in citric acid solution and the effect of some inorganic anions
923
Corrosion of Ti–STS dissimilar joints brazed by a Ag interlayer and Ag–Cu–(Pd) alloy fillers
924
Corrosion of titanium and amalgam couples: Effect of fluoride, area size, surface preparation and fabrication procedures
925
Corrosion of transversely heated graphite tubes by iron and lanthanum matrices
926
Corrosion of type 6061-T6 aluminum in mercury and mercury vapor
927
Corrosion of UO2 and ThO2: A quantum-mechanical investigation
928
Corrosion of V–Ti–Cr alloys in liquid lithium: influence of alloy composition and concentration of nitrogen in lithium
929
Corrosion of Zinc Ferrite Based Inert Anodes in AlF3-NaF-Al2O3 Melts Under Conditions of Anodic Polarization
930
Corrosion of β-sialon-based ceramics by molten steel
931
Corrosion on silicon sensors
932
Corrosion on silicon sensors
933
Corrosion performance and mechanical stability of 316L/DLC coating system: Role of interlayers
934
Corrosion Performance of (Ha-Psz) Bio Ceramic Coated Ti-20Co Alloy in Simulated Physiological Media
935
Corrosion performance of a hot-dip galvanized steel treated by different kinds of conversion coatings
936
Corrosion performance of an additive manufactured 316L stainless steel in the concrete pore solution
937
Corrosion performance of anodic films containing polyaniline and TiO2 nanoparticles on AA3105 aluminium alloy
938
Corrosion performance of conventional (ASTM A615) and low-alloy (ASTM A706) reinforcing bars embedded in concrete and exposed to chloride environments
939
Corrosion performance of duplex treatments based on plasma nitriding and PAPVD TiAlN coating
940
Corrosion performance of electroless Ni–P on polymer coating of MAO coated AZ31 magnesium alloy
941
Corrosion performance of epoxy-coated reinforcing steel: North American experience
942
Corrosion performance of heat resistant alloys in Na2SO4–V2O5 molten salts
943
Corrosion performance of iron aluminides in mixed-oxidant environments
944
Corrosion performance of iron aluminides in mixed-oxidant environments
945
Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution
946
Corrosion performance of molybdenum silicides in acid solutions
947
Corrosion performance of molybdenum silicides in acid solutions
948
Corrosion performance of plasma-sprayed cast iron coatings on aluminum alloy for automotive components
949
Corrosion performance of PVD-coated and anodised materials for the decorative market
950
Corrosion performance of rice husk ash blended concrete
951
Corrosion performance of self-doped sulfonated polypyrrole coatings on stainless steel
952
Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor
953
Corrosion performance of the plasma nitrided 316L stainless steel
954
Corrosion performance of thin amorphous carbon films on aluminum formed by ion beam-based coating techniques
955
Corrosion performance of TiO2 coated type 304L stainless steel in nitric acid medium
956
Corrosion performance of welded stainless steels reinforcements in simulated pore solutions
957
Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses
958
Corrosion phenomena of alloys by subcritical and supercritical water oxidation of 2-chlorophenol
959
Corrosion pit size distributions and fatigue lives—a study of the EIFS technique for fatigue design in the presence of corrosion
960
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis
961
Corrosion potential recovery of dental amalgam restorations following prophylaxis
962
Corrosion potential variation of aged dental amalgam restorations over time
963
Corrosion Prediction for Corrosion Rate of Carbon Steel in Oil and Gas Environment: A Review
964
Corrosion prevention and remediation strategies for reinforced concrete coastal bridges
965
Corrosion prevention of Er2O3 by O control in Li
966
Corrosion prevention of graphite collector in vanadium redox flow battery
967
Corrosion problem in headspace gas chromatography with phase reaction conversion technique
968
Corrosion problems during oil and gas production and its mitigation
969
Corrosion problems in tinplate cans for storing contact glues for shoes
970
Corrosion process and abatement in reinforced concrete wrapped by fiber reinforced polymer
971
Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment
972
Corrosion product deposits on boiling-water reactor cladding: Experimental and theoretical investigation of magnetic properties
973
Corrosion Products and Formation Mechanism During Initial Stage of Atmospheric Corrosion of Carbon Steel Original Research Article
974
Corrosion products of reinforcement in concrete in marine and industrial environments
975
Corrosion Products Study of VVER-440 Secondary Circuit
976
Corrosion propagation of prestressing steel strands in concrete subject to chloride attack
977
Corrosion properties and corrosion evolution of as-cast AZ91 alloy with rare earth yttrium
978
Corrosion Properties of 34CrMo4 Steel Modified by Shot Peening
979
Corrosion Properties of 70SiO2-15TiO2-15ZrO2 Ceramic Membrane
980
Corrosion properties of a Cr13Ni5Si2-based metal silicide alloy
981
Corrosion properties of alumina and titania NF membranes
982
Corrosion properties of aluminium coatings deposited on sintered NdFeB by ion-beam-assisted deposition
983
Corrosion properties of duplex treated Ti–6Al–4V alloy in chloride media using electrochemical and positron annihilation spectroscopy techniques
984
Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy
985
Corrosion properties of Fe–24Cr stainless alloy modified by plasma immersion ion implantation in 0.5 M sulfuric acid solution
986
Corrosion properties of Fe–Cr–Nb–B amorphous alloys and coatings
987
Corrosion properties of glassy Mg70Al15Ga15 in 0.1 M NaCl solution
988
Corrosion properties of high-performance CoNiFe based soft magnetic thin films prepared by electro or electroless deposition
989
Corrosion properties of HVOF-coated steel in simulated concrete pore electrolyte and concentrated chloride environments
990
Corrosion properties of in situ laser remelted NiCrBSi coatings comparison with hard chromium coatings
991
Corrosion properties of ion beam modified fullerene thin films on iron substrates
992
Corrosion Properties of Light-weight and High-strength 2195 Al-Li Alloy
993
Corrosion properties of micro- and nanocomposite copper matrix coatings produced from a copper pyrophosphate bath under pulse current
994
Corrosion properties of N-doped austenitic stainless steel films prepared by IBAD
995
Corrosion properties of oxide dispersion strengthened steels in super-critical water environment
996
Corrosion properties of oxygen plasma immersion ion implantation treated magnesium
997
Corrosion properties of plasma-sprayed Al2O3-TiO2 coatings on Ti metal
998
Corrosion properties of stainless steel 316 L after energetic nitrogen insertion
999
Corrosion properties of thermally annealed and co-sputtered nickel silicide thin films
1000
Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys