بر اساس عنوان

1
Fate of Mitral Regurgitation Following Repair of Atrioventricular Septal Defect
2
Fate of moderate and large secundum type atrial septal defect associated with isolated coarctation in infants
3
Fate of nanomedicines in the lungs
4
Fate of natural estrogen conjugates in municipal sewage transport and treatment facilities
5
Fate of natural estrogens in batch mixing experiments using municipal sewage and activated sludge
6
FATE OF NATURAL ORGANIC MATTER (NOM) DURING GROUNDWATER RECHARGE USING RECLAIMED WATER
7
FATE OF NATURAL ORGANIC MATTER (NOM) DURING GROUNDWATER RECHARGE USING RECLAIMED WATER
8
Fate of neuroblast progeny during postembryonic development of mushroom bodies in the house cricket, Acheta domesticus
9
Fate of Nitrate In Soil Cultivated With Maize (Zea mays L.) Under Different Patterns of Irrigation Regime and Localized Compaction
10
Fate of nitrate in the capillary fringe and shallow groundwater in a drained sandy soil
11
Fate of nitrogen and carbon in the vadose zone: in situ and laboratory measurements of seasonal variations in aerobic respiratory and denitrifying activities
12
Fate of nitrogen and carbon in the vadose zone: in situ and laboratory measurements of seasonal variations in aerobic respiratory and denitrifying activities
13
Fate of nitrogen during composting of chicken litter
14
Fate of nitrogen from crop residues as affected by biochemical quality and the microbial biomass
15
Fate of nitrogen from crop residues as affected by biochemical quality and the microbial biomass
16
Fate of Nitrogen-15 in a Long-Term Nitrogen Rate Study I. Interactions with Soil Nitrogen
17
Fate of Nitrogen-15 in a Long-Term Nitrogen Rate Study II. Nitrogen Uptake Efficiency
18
Fate of nitrogen-15-labelled fertilizer applied to maize-millet cropping systems in the mid-hills of Nepal
19
Fate of nonylphenol polyethoxylates and their metabolites in four Beijing wastewater treatment plants Original Research Article
20
Fate of organic carbon in UAFB treating raw sewage: Impact of moderate to low temperature
21
Fate of organic matter during aquifer storage and recovery (ASR) of reclaimed water in a carbonate aquifer
22
Fate of organic matter in Arctic intertidal sediments: Is utilisation by meiofauna important?
23
Fate of organic matter in the Ría de Ferrol (Galicia, NW Spain): uptake by pelagic bacteria vs. particle sedimentation
24
Fate of organic micropollutants in the hyporheic zone of a eutrophic lowland stream: Results of a preliminary field study Original Research Article
25
Fate of organics during soil-aquifer treatment: sustainability of removals in the field
26
Fate of organochlorine contaminants in arctic and subarctic lakes estimated by mass balance modelling
27
Fate of organochlorine pesticides in soils and terrestrial biota of “Los Padres” pond watershed, Argentina
28
Fate of organotins in sewage sludge during anaerobic digestion
29
Fate of oxygen losses from Typha domingensis (Typhaceae) and Cladium jamaicense (Cyperaceae) and consequences for root metabolism1
30
Fate of PAHs in the post-combustion zone: Partial oxidation of PAHs to dibenzofuran over CuO
31
Fate of Pakistani Exported Mango due to Its Toxicity (Heavy Metals, Pesticides, and Other Toxic Organic Components)
32
Fate of paralytic shellfish poisoning toxins in purple clam Hiatula rostrata, in outdoor culture and laboratory culture
33
Fate of Pathogen Indicators During Extended Aeration Wastewater Treatment
34
Fate of Pathogens in Sludge Sand Drying Beds at Qateef, Khobar and Dammam: A Case Study
35
Fate of Patients With Prehospital Resuscitation for ST-Elevation Myocardial Infarction and a High Rate of Early Reperfusion Therapy (Results from the PREMIR [Prehospital Myocardial Infarction Registry])
36
Fate of PCBs, PAHs and their source characteristic ratios during composting and digestion of source-separated organic waste in full-scale plants
37
Fate of PCDD/PCDF during mechanical–biological sludge treatment
38
Fate of PCDF/PCB congeners and change of clinical symptoms in patients with Yusho PCB poisoning for 30 years
39
Fate of peptidoglycan in an intertidal sediment: An in situ 13C-labeling study
40
Fate of perchlorate-contaminated water in upflow wetlands
41
Fate of persistent organic pollutants in the water column: Does turbulent mixing matter?
42
Fate of pharmaceutical and personal care products (PPCPs) during anaerobic digestion of sewage sludge
43
Fate of pharmaceuticals and cosmetic ingredients during the operation of a MBR treating sewage Original Research Article
44
Fate of pharmaceuticals––photodegradation by simulated solar UV-light
45
Fate of phosphorus applied in slurry and mineral fertilizer: accumulation in soil and release into surface runoff water
46
Fate of physical, chemical, and microbial contaminants in domestic wastewater following treatment by small constructed wetlands
47
Fate of Plasticised PVC Products under Landfill Conditions: A Laboratory-Scale Landfill Simulation Reactor Study
48
Fate of platinum metals in the environment
49
Fate of polyaromatic hydrocarbons in the pyrolysis of industrial waste oils
50
Fate of polycyclic aromatic hydrocarbon (PAH) contamination in a mangrove swamp in Hong Kong following an oil spill
51
Fate of polycyclic aromatic hydrocarbons during composting of activated sewage sludge with green waste
52
Fate of polycyclic aromatic hydrocarbons during composting of lagooning sewage sludge
53
Fate of polycyclic aromatic hydrocarbons during vitrification of incinerator ash in a coke bed furnace
54
Fate of polydnavirus DNA of the egg–larval parasitoid Chelonus inanitus in the host Spodoptera littoralis
55
Fate of polymeric nanocarriers for oral drug delivery
56
Fate of POPs žDDX, HCHs, PCBs/ in upper soil layers of pine forests
57
Fate of Postacrosomal Perinuclear Theca Recognized by Monoclonal Antibody MN13 after Sperm Head Microinjection and Its Role in Oocyte Activation in Mice
58
Fate of post-processing inoculated Listeria monocytogenes on vacuum-packaged pepperoni stored at 4, 12 or 25 °C Original Research Article
59
Fate of prions in soil: Degradation of recombinant prion in aqueous extracts from soil and casts of two earthworm species
60
Fate of prions in soil: Degradation of recombinant prion in aqueous extracts from soil and casts of two earthworm species
61
Fate of prions in soil: Interaction of a recombinant ovine prion protein with synthetic humic-like mineral complexes
62
Fate of prions in soil: Interaction of a recombinant ovine prion protein with synthetic humic-like mineral complexes
63
Fate of prions in soil: Longevity and migration of recPrP in soil columns
64
Fate of prions in soil: Longevity and migration of recPrP in soil columns
65
Fate of products of degradation processes: Consequences for climatic change
66
Fate of pyrene in contaminated soil amended with alternate electron acceptors
67
Fate of radio-tagged trawl web on an Alaskan beach
68
Fate of RDX and TNT in agronomic plants
69
Fate of resin acids in pulp mill secondary treatment systems
70
Fate of Salmonella during sesame seeds roasting and storage of tahini
71
Fate of Seasonal, Terrestrial Nutrient Inputs to a Shallow Seagrass Dominated Embayment
72
Fate of secondary alkane sulfonate surfactants during municipal wastewater treatment
73
Fate of selected emerging micropollutants during mesophilic, thermophilic and temperature co-phased anaerobic digestion of sewage sludge
74
Fate of selected estrogens in two laboratory scale sequencing batch reactors fed with different organic carbon sources under varying solids retention times
75
Fate of selenium species in sesame seeds during simulated bakery process Original Research Article
76
Fate of seven pesticides in an aerobic aquifer studied in column experiments
77
Fate of several hydroxyalkyl isoprene radicals: Formation of hydroxycarbonyl compounds
78
Fate of sex hormones in two pilot-scale municipal wastewater treatment plants: Conventional treatment Original Research Article
79
Fate of soil bacteria and fungi in the gut of earthworms
80
Fate of soluble residual organics in membrane bioreactor
81
Fate of some chlorinated hydrocarbons in arctic and far eastern ecosystems in the Russian Federation
82
Fate of some fungal spores associated with wheat straw decomposition on passage through the guts of Lumbricus terrestris and Aporrectodea longa
83
Fate of some fungal spores associated with wheat straw decomposition on passage through the guts of Lumbricus terrestris and Aporrectodea longa
84
Fate of stent-related side branches after coronary intervention in patients with in-stent restenosis  
85
Fate of sulfadiazine administered to pigs and its quantitative effect on the dynamics of bacterial resistance genes in manure and manured soil
86
Fate of sulfadiazine administered to pigs and its quantitative effect on the dynamics of bacterial resistance genes in manure and manured soil
87
Fate of sulfonamides, macrolides, and trimethoprim in different wastewater treatment technologies
88
Fate of sulfur with H2S injection in methane/air flames
89
Fate of sulphate removed during the treatment of circumneutral mine water and acid mine drainage with coal fly ash: Modelling and experimental approach
90
Fate of symbiotically-fixed 15N2 as influenced by method of alfalfa termination
91
Fate of symbiotically-fixed 15N2 as influenced by method of alfalfa termination
92
Fate of synthetic musks in a domestic wastewater treatment plant and in an agricultural field amended with biosolids
93
Fate of the antiretroviral drug tenofovir in agricultural soil Original Research Article
94
Fate of the aort after arterial switch operation
95
Fate of the Black Sea Acartia clausi and Acartia tonsa (Copepoda) penetrating into the Marmara Sea through the Bosphorus
96
Fate of the Cenozoic Farallon slab from a comparison of kinematic thermal modeling with tomographic images
97
Fate of the chlorine and fluorine in a sub-bituminous coal during pyrolysis and gasification
98
Fate of the excited triplet state of zinc cytochrome c in the presence of iron(III), iron(II), iron-free, and heme-free forms of cytochrome c
99
Fate of the fungicide dodemorph during anaerobic digestion of biological waste
100
FATE OF THE GENOME AND INFECTIOUS UNITS OF COXSACKIE B3 VIRUS IN PHOSPHATE BUFFERED SALINE
101
Fate of the herbicide 14C-terbuthylazine in Brazilian soils under various climatic conditions
102
Fate of the herbicide glufosinate-ammonium in the sandy, low-organic-carbon aquifer at CFB Borden, Ontario, Canada
103
Fate of the herbicide linuron in outdoor experimental ditches
104
FATE OF THE METAL-BINDING SOLUBLE ORGANIC MATTER THROUGHOUT A SOIL PROFILE.
105
Fate of the Najd Fault System in Northwestern Saudi Arabia and Southwestern Jordan
106
Fate of the organotin pesticide azocyclotin in aquatic microcosms
107
Fate of the phenolic compounds during olive oil production with the traditional press method
108
Fate of the Residual Distal and Proximal Aorta After Acute Type A Dissection Repair Using a Contemporary Surgical Reconstruction Algorithm
109
Fate of the resting perfusion defect as assessed with technetium-99m methoxy-isobutyl-isonitrile single-photon emission computed tomography after successful revascularization in patients with healed myocardial infarction
110
Fate of the sterile neutrino
111
Fate of the Truncal Valve in Truncus Arteriosus
112
Fate of the worty flavours in a cold contact fermentation
113
Fate of three major rivers in the Bohai Sea: A model study
114
Fate of Tolyltriazoles and Nonylphenol Ethoxylates in Upflow Anaerobic Sludge Blanket Reactors
115
Fate of trace element haps when applying mercury control technologies
116
Fate of trace organic compounds during treatment by nanofiltration
117
Fate of transgenic DNA and evaluation of metabolic effects in goats fed genetically modified soybean and in their offsprings
118
Fate of triazole fungicide residues during malting, mashing and boiling stages of beermaking
119
Fate of Trileaflet Equine Pericardial Extracardiac Conduit Used for the Correction of Anomalies Having Pulmonic Ventricle–Pulmonary Arterial Discontinuity
120
Fate of two microorganisms in maize simulated rhizosphere under hydroponic and sterile conditions
121
Fate of two microorganisms in maize simulated rhizosphere under hydroponic and sterile conditions
122
Fate of unprotected side branches as related to embolic complications during stent implantation for acute coronary syndromes using a distal protection procedure
123
Fate of urea and ureaformaldehyde nitrogen in a one-year laboratory incubation with Douglas-fir forest floor
124
Fate of urea and ureaformaldehyde nitrogen in a one-year laboratory incubation with Douglas-fir forest floor
125
Fate of Urine Nitrogen in Three Soils throughout a Grazing Season
126
Fate of vent-derived methane in seawater above the Håkon Mosby mud volcano (Norwegian Sea)
127
Fate of Vibrio cholerae O1 in seawater microcosms
128
Fate of Vibrio parahaemolyticus on shrimp after acidic electrolyzed water treatment
129
Fate of wastewater organic pollution during activated sludge treatment: nature of residual organic matter
130
Fate of wastewater-borne nutrients under low discharge conditions in the subsurface of the Florida Keys, USA
131
Fate of Water-Soluble Polysaccharides in Dried Chorda filum a Brown Alga During Water Washing
132
Fate of Water-Soluble Polysaccharides in Dried Chorda filum a Brown Alga During Water Washing
133
Fate of wood extractives in wastewater treatment plants at kraft pulp mills and mechanical pulp mills
134
Fate of Yersinia enterocolitica during manufacture, ripening and storage of Lighvan cheese
135
Fate of zinc in an electroplating sludge during electrokinetic treatments Original Research Article
136
Fate simulation and risk assessment of endocrine disrupting chemicals in a reservoir receiving recycled wastewater Original Research Article
137
Fate, bioavailability and toxicity of silver in estuarine environments
138
Fate, Distribution and Sources of Polycyclic Aromatic Hydrocarbons (PAHs) in Contaminated Soils in Parts of Calabar Metropolis, South Eastern Nigeria
139
Fate, effects and potential environmental risks of ethylene glycol: a review
140
Fate, tree growth effect and potential impact on soil microbial communities of mycorrhizal and bacterial inoculation in a forest plantation
141
Fate, tree growth effect and potential impact on soil microbial communities of mycorrhizal and bacterial inoculation in a forest plantation
142
Fateev-Zamolodchikov and Kashiwara-Miwa models: boundary star-triangle relations and surface critical properties Original Research Article
143
Fateful Memories: Industrialized War and Traumatic Neuroses
144
Faten Hamama and Hind Rustom: Stars from Different Heavens
145
Fates and roles of alkali and alkaline earth metals during the pyrolysis of a Victorian brown coal
146
Fates and Vascular Action ofS-Nitrosoglutathione and Related Compounds in the Circulation
147
Fates of 13C from enriched glucose and glycine in an organic soil determined by solid-state NMR
148
Fates of bacteriophages and bacterial indicators in the Moselle river (France)
149
Fates of deoxynivalenol and deoxynivalenol-3-glucoside during bread and noodle processing
150
Fates of dissolved and particulate materials from the Mississippi river immediately after discharge into the northern Gulf of Mexico, USA, during a period of low wind stress
151
Fates of radioactive arsenic, cesium, strontium and organo-chlorine during the gasification of mixed wastes in the presence of organic matter
152
Fates of satellite ejecta in the Saturn system
153
Fat-free and fat mass percentiles in 5225 healthy subjects aged 15 to 98 years
154
Fat-free mass by bioelectrical impedance Vs dual-energy X-ray absorptiometry (DXA)
155
Fat-free mass components in active vs sedentary females aged 55–75 yr
156
Fat-Free Mass estimation by total body Potassium: A novel calibration procedure and inter-method comparison
157
Fat-free mass from two prediction equations for bioelectrical impedance analysis in a large German population compared with values in Swiss and American adults: Reasons for a biadata project
158
Fat-free mass in chronic illness: comparison of bioelectrical impedance and dual-energy x-ray absorptiometry in 480 chronically ill and healthy subjects
159
Fat-free Mass is Related to One-Mile Race Performance in Elite Standardbred Horses
160
Fat-free mass, muscle bulk and strength in liver disease
161
Fath-Baised Institutions and Human Development in Nigeria: The Kano State Hisbah Board in Focus
162
Fathead minnow histology atlas: worldwide web outreach and utilization
163
Fathead minnows, Pimephales promelas, acquire predator recognition when alarm substance is associated with the sight of unfamiliar fish
164
Fathead minnows, Pimephales promelas, learn to recognize northern pike, Esox lucius, as predators on the basis of chemical stimuli from minnows in the pikeʹs diet
165
Father absence and timing of menarche in adolescent girls from a UK cohort: The mediating role of maternal depression and major financial problems
166
Father– and mother–infant face-to-face interactions: Differences in mind-related comments and infant attachment?
167
Father bonding and blood pressure in young adults from intact and divorced families
168
FATHER FIGURES AND THEIR RELATIONSHIPS WITH CHILDREN IN SOCIAL CONTENTED TURKISH CHILDREN S NOVELS
169
Father involvement in child care and household work in common-law dual-earner and single-earner Jamaican families
170
Father involvement program effects on fathers, father figures, and their head start children: a quasi-experimental study
171
Father mental health during the early parenting period: results of an Australian population based longitudinal study
172
FATHER OF MODERN BIOCHEMISTRY IN IRAN
173
Father’s support and literacy — factors associated with child mortality in Gambat, Sindh-Pakistan
174
Father–offspring resemblance predicts paternal investment in humans
175
Fathers Involvement in the Developmental Care of Their Preterm Newborns and its Impact on the Bonding and Self-Efficacy: A Nonrandomized Clinical Trial
176
Fathers Cognitive Appraisals, Coping Strategies, and Support Resources as Correlates of Adjustment to Parenthood
177
Fatherʹs effect on infant birth weight
178
Fathersʹ language input during shared book activities: Links to childrenʹs kindergarten achievement
179
Fathersʹ language input during shared book activities: Links to childrenʹs kindergarten achievement
180
Fathers of Children With Autism Spectrum Disorder: Literature Review
181
Fathers of children with Downs syndrome versus other types of intellectual disability: perceptions, stress and involvement
182
Fathersʹ role in the etiology, prevention and treatment of child anxiety: A review and new model
183
Fathers’ Experiences during Delivery of Their Newborns: A Content Analysis
184
Fathers’ Parenting Styles in Chinese Families in Urban Malaysia
185
Fathers’ proficiency at recognizing their newborns by tactile cues
186
Fathoming Funding
187
Fatigue
188
Fatigue — determination of a more realistic usage factor
189
Fatigue — determination of a more realistic usage factor Original Research Article
190
Fatigue after breast cancer and in chronic fatigue syndrome: Similarities and differences
191
Fatigue after major joint arthroplasty: Relationship to preoperative fatigue and postoperative emotional state
192
Fatigue after stroke: The development and evaluation of a case definition
193
Fatigue after subarachnoid haemorrhage: A systematic review
194
Fatigue analyses for swept friction stir spot welds in lap-shear specimens of alclad 2024-T3 aluminum sheets
195
Fatigue analyses of buildings with viscoelastic dampers
196
Fatigue analysis and life prediction of bridges with structural health monitoring data — Part I: methodology and strategy
197
Fatigue analysis and life prediction of bridges with structural health monitoring data — Part II: application
198
Fatigue analysis by local stress concept based on finite element results
199
Fatigue analysis for the first row of blades of a micro turbine under full loading cycle using transient modal analysis
200
Fatigue analysis of a P180 aircraft main landing gear wheel flange
201
Fatigue analysis of a plastic component in the window regulator system via considering the variation of fatigue characteristics
202
Fatigue analysis of an automotive steering link
203
Fatigue analysis of an electric windows mechanism subjected to operation cycles
204
Fatigue analysis of autofrettaged pressure vessels with radial holes
205
Fatigue analysis of box-girder webs subjected to in-plane shear and transverse bending induced by railway traffic
206
Fatigue analysis of cemented hip prosthesis: damage accumulation scenario and sensitivity analysis
207
Fatigue analysis of cemented hip prosthesis: model definition and damage evolution algorithms
208
Fatigue analysis of concrete bridge deck slabs reinforced with E-glass/vinyl ester FRP reinforcing bars
209
Fatigue analysis of cracked thick aluminum plate bonded with composite patches
210
Fatigue analysis of crankshaft sections under bending with consideration of residual stresses
211
Fatigue analysis of damaged steel pipelines under cyclic internal pressure
212
Fatigue analysis of friction stir welded aluminium profile using critical distance
213
Fatigue Analysis of Hybrid Composites of Kenaf/Kevlar Fibre Reinforced Epoxy Composites
214
Fatigue analysis of liquid-storage tank shell-to-base connections under multi-axial loading
215
Fatigue analysis of long-span suspension bridges under multiple loading: Case study
216
FATIGUE ANALYSIS OF NON-LINEAR STRUCTURES WITH VON MISES STRESS
217
Fatigue analysis of non-load-carrying fillet welded cruciform joints
218
Fatigue analysis of overhead sign support structures
219
Fatigue analysis of Package Terminal Air Conditioner motor bracket under dynamic loading
220
Fatigue analysis of post-weld fatigue improvement treatments using a strain-based fracture mechanics model
221
Fatigue analysis of railway coupling joint
222
Fatigue Analysis of RC Slabs and Repaired RC Slabs Based on Crack Bridging Degradation Concept
223
Fatigue analysis of riveted railway bridge connections using the theory of critical distances
224
Fatigue analysis of ship deck structure accounting for imperfections
225
Fatigue analysis of spot welds using a mesh-insensitive structural stress approach
226
Fatigue analysis of the railway wheels of the CRH2 high speed train due to random parameters
227
Fatigue analysis of the surface EMG signal in isometric constant force contractions using the averaged instantaneous frequency
228
Fatigue analysis of thin AlMgSi welded joints under constant and variable amplitude block loadings
229
Fatigue analysis of unidirectional GFRP composites under combined bending and torsional loads
230
Fatigue analysis of welded joints with the aid of real three-dimensional weld toe geometry
231
Fatigue analysis of welded joints: state of development
232
fatigue analysis under variable amplitude loading using an energy parameter
233
Fatigue analysis using the singular ES-FEM
234
Fatigue analysis with finite and boundary element methods a bibliography (1993–1995)
235
Fatigue and Activity Management Education for Individuals with Systemic Lupus Erythematosus
236
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
237
Fatigue and biocompatibility properties of a poly(methyl methacrylate) bone cement with multi-walled carbon nanotubes
238
Fatigue and brittle fracture of carbon steel process pipeline
239
Fatigue and corrosion fatigue behavior of an AA6063-T6 aluminum alloy coated with a WC–10Co–4Cr alloy deposited by HVOF thermal spraying
240
Fatigue and Corrosion Fatigue Properties of Ti-6Al-4V Implant Grade Titanium Alloy in Ringer Solution
241
Fatigue and corrosion in aircraft pressure cabin lap splices
242
Fatigue and corrosion of a Pd-based bulk metallic glass in various environments
243
Fatigue and crack-growth analyses on 7075-T651 aluminum alloy coupons under constant- and variable-amplitude loading
244
Fatigue and creep analyses of adhesively bonded anchorages for CFRP tendons
245
Fatigue and creep deformed microstructures of aged alloys based on Al–4% Cu–0.3% Mg
246
Fatigue and creep of high-performance fibers: Deformation mechanics and failure criteria
247
Fatigue and creep–fatigue deformation of an ultra-fine precipitate strengthened advanced austenitic alloy
248
Fatigue and cyclic creep of replicated microcellular aluminium
249
Fatigue and cyclic deformation behavior of brazed steel joints
250
Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media
251
Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP
252
Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP
253
Fatigue and damage analysis of elastomeric silent block in light aircrafts
254
Fatigue and damage to the masseter muscle by prolonged low-frequency stimulation in the rat
255
Fatigue and damage tolerance issues of Glare in aircraft structures
256
Fatigue and debris generation at indentation-induced cracks in silicon Original Research Article
257
Fatigue and deformation of HVOF sprayed WC–Co coatings and hard chrome plating
258
Fatigue and deformation of HVOF sprayed WC–Co coatings and hard chrome plating
259
Fatigue and demographic factors influencing on it in dialyzed patients
260
Fatigue and depression and sleep problems among hemodialysis patients in a tertiary care center
261
Fatigue and disease-related worries among inflammatory bowel disease patients in remission; is it a reflection of coexisting IBS-like symptoms? A short report
262
Fatigue and durability of Nitinol stents
263
Fatigue and dynamic load measurements on modular expansion joints
264
Fatigue and fatigue crack growth of aluminium alloys at very high numbers of cycles
265
Fatigue and fracture analysis of aluminum plate with composite patches under the hygrothermal effect
266
Fatigue and fracture assessment for reliability in electronics packaging
267
Fatigue and fracture behavior in notched specimens of C/C composite with fine-woven carbon fiber laminates Original Research Article
268
Fatigue and fracture behavior of (Zr58Ni13.6Cu18Al10.4)99Nb1 bulk-amorphous alloy
269
Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels
270
Fatigue and fracture behavior of nickel–titanium shape-memory alloy reinforced aluminum composites
271
Fatigue and fracture behavior of nickel–titanium shape-memory alloy reinforced aluminum composites
272
Fatigue and fracture behaviour of a laser surface heat treated martensitic high-nitrogen tool steel
273
Fatigue and fracture behaviour of high strength steel S1100Q
274
Fatigue and fracture behaviour of structural Al-alloys up to very long life regimes
275
Fatigue and fracture emanating from notch; the use of the notch stress intensity factor Original Research Article
276
FATIGUE AND FRACTURE IN POLYACETAL RESINS
277
Fatigue and fracture of a 316 stainless steel metal matrix composite reinforced with 25% titanium diboride
278
Fatigue and fracture of a Ni–P amorphous alloy thin film on the micrometer scale
279
Fatigue and fracture of engineering materials and structures, and electronics
280
Fatigue and fracture paths in cold drawn pearlitic steel
281
Fatigue and fracture performance of cold drawn wires for prestressed concrete
282
Fatigue and fracture properties of yttria partially stabilized zirconia crown systems
283
Fatigue and fracture reliability of TLP tethers under random loading
284
Fatigue and fracture simulation of welded bridge details through a bi-linear crack growth law
285
Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures
286
Fatigue and hardness effects of a thin buffer layer on the heat affected zone of a weld repaired Bisplate80
287
Fatigue and hope: Relationships to psychosocial adjustment in Korean women with breast cancer
288
Fatigue and individual differences in monotonous simulated driving
289
Fatigue and Its Related Factors Among Iranian Cancer Survivors
290
Fatigue and life prediction for cobalt-chromium stents: A fracture mechanics analysis
291
Fatigue and mechanical characteristics of nano-structured tool steel by ultrasonic cold forging technology
292
Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings
293
Fatigue and Mechanical Properties of NR/SBR and NR/NBR Blend Vulcanizates
294
Fatigue and Mechanical Properties of NR/SBR and NR/NBR Blend Vulcanizates
295
Fatigue and Microstructure of Iron Based Sintered Alloys Original Research Article
296
Fatigue and monotonic loading crack nucleation and propagation in bimodal grain size aluminum alloy Original Research Article
297
Fatigue and monotonic properties of an interstitial free steel sheet (FMPIF)
298
Fatigue and Overloading Behavior of Steel–Concrete Composite Flexural Members Strengthened with High Modulus CFRP Materials
299
Fatigue and pain in human jaw muscles during a sustained, low-intensity clenching task
300
Fatigue and physical activity in older women after myocardial infarction
301
Fatigue and plaque rupture in myocardial infarction
302
Fatigue and post-fatigue stress–strain analysis of a 5-harness satin weave carbon fibre reinforced composite
303
Fatigue and post-fatigue tensile behaviour of non-crimp stitched and unstitched carbon/epoxy composites
304
FATIGUE AND PROOF TESTING OF AN AIRCRAFT AUXILIARY FUEL TANK
305
Fatigue and psychiatric illness in a large community sample of persons with multiple sclerosis
306
Fatigue and psychological distress in the working population: Psychometrics, prevalence, and correlates
307
Fatigue and Psychological Distress: A Case Study Among Shift Workers of an Iranian Petrochemical Plant, During 2013, in Bushehr
308
Fatigue and ratcheting behaviors of CP-Ti at room temperature
309
Fatigue and repair in bone
310
Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110
311
Fatigue and retention properties of Bi3.25La0.75Ti3O12 films using LaNiO3 bottom electrodes
312
Fatigue and rutting lives in flexible pavement
313
Fatigue and rutting performance of lime-modified hot-mix asphalt mixtures
314
Fatigue and sleep disorders
315
Fatigue and social impairment in multiple sclerosis: The role of patientsʹ cognitive and behavioral responses to their symptoms
316
Fatigue and static behaviour of aluminium box-stiffener lap joints
317
Fatigue and stress-rupture behaviors of SiC/SiC composite under humid environment at elevated temperature
318
Fatigue and subcritical crack growth in ZrO2–bioglass ceramics
319
Fatigue and tiredness in people with spinal cord injury
320
Fatigue and Tribological Properties of Plastics and Elastomers: PDL Handbook Series
321
Fatigue and wear evaluation of Ti-Al-Nb alloys for biomedical applications
322
Fatigue anisotropy in lead-zirconate-titanate
323
Fatigue as a process of cyclic brittle microfracture
324
Fatigue as a window to the brain, J. DeLuca (Ed.). The MIT Press, Massachusetts (2005), 336
325
Fatigue as experienced by patients with rheumatoid arthritis (RA): A qualitative study
326
Fatigue assessment and fatigue life calculation of quenched and tempered SAE 4140 steel based on stress–strain hysteresis, temperature and electrical resistance measurements
327
Fatigue Assessment and its Associated Factors in Breast Cancer Patients Under Chemotherapy Treatment
328
Fatigue assessment by spectral approach for the ISSC comparative study of the hatch cover bearing pad
329
Fatigue assessment of a double submerged arc welded gas pipeline
330
Fatigue assessment of a riveted shear splice based on a probabilistic model
331
Fatigue assessment of AA 8090 friction stir butt welds after surface finishing treatment
332
Fatigue assessment of an electrical resistance welded oil pipeline
333
Fatigue assessment of arc welded automotive components using local stress approaches: Application to a track control arm
334
Fatigue assessment of friction stir channels
335
Fatigue assessment of high frequency mechanical impact (HFMI)-improved fillet welds by local approaches
336
Fatigue assessment of highway steel bridges in presence of seismic loading
337
Fatigue assessment of large-size welded joints based on the effective notch stress approach
338
Fatigue assessment of laser stake-welded T-joints
339
Fatigue assessment of laser welded thin sheet aluminium
340
Fatigue assessment of multi-loading suspension bridges using continuum damage model
341
Fatigue assessment of piston rod threaded end
342
Fatigue assessment of root failures in HSLA steel welded joints: A comparison among local approaches
343
Fatigue assessment of the conductor jacket for the Next European Torus toroidal field and poloidal field coils
344
Fatigue assessment of the ITER TF coil case based on JJ1 fatigue tests
345
Fatigue assessment of tilting bogie frame for Korean tilting train: Analysis and static tests
346
Fatigue assessment of vibrating rail vehicle bogie components under non-Gaussian random excitations using power spectral densities
347
Fatigue assessment of welded joints under slit-parallel loading based on strain energy density or notch rounding
348
Fatigue assessment of welded joints using critical distance and other methods
349
Fatigue assessment of welded trapezoidal joints of a very fast ferry subjected to combined load
350
Fatigue assessment of welds joining corrugated steel webs to flange plates
351
Fatigue Assessment Scales: A comprehensive literature review
352
Fatigue assessment using an integrated threshold curve method – applications
353
Fatigue behavior analysis of a rear tow hook pin of a passenger vehicle
354
Fatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag
355
Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP)
356
Fatigue behavior and damage modeling of SCS-6/titanium/titanium aluminide hybrid laminated composite
357
Fatigue behavior and damage modeling of SCS-6/titanium/titanium aluminide hybrid laminated composite
358
Fatigue behavior and development of microcracks in F82H after helium implantation at 200°C
359
Fatigue behavior and dislocation substructures for 6063 aluminum alloy under nonproportional loadings
360
Fatigue behavior and FEM modeling of thin-coated components
361
Fatigue behavior and fracture morphology of Zr50Al10Cu40 and Zr50Al10Cu30Ni10 bulk-metallic glasses
362
Fatigue behavior and life prediction of carbon fiber reinforced concrete under cyclic flexural loading
363
Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels
364
Fatigue behavior and microstructure of 0001 and 1̄014 magnesium single crystals under compression–compression cyclic loading
365
Fatigue Behavior and Nondestructive Evaluation of Full-Scale FRP Honeycomb Bridge Specimen
366
Fatigue behavior of (graded) (Ti, Al)N-coated 1Cr11Ni2W2MoV stainless steel at high temperature
367
Fatigue behavior of [0n/90n]s composite cantilever beam under tip impulse loading
368
Fatigue behavior of 1500 MPa bainite/martensite duplex-phase high strength steel
369
Fatigue behavior of 20% cold-worked 316 stainless steel under in situ irradiation with 17 MeV protons at 60 °C
370
Fatigue behavior of 2D laminate C/C composites at room temperature
371
Fatigue behavior of 3D multi-layer angle interlock woven composite plates
372
Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating
373
Fatigue behavior of a 4140 steel coated with a Colmonoy 88 alloy applied by HVOF
374
Fatigue behavior of a 4140 steel coated with a NiMoAl deposit applied by HVOF thermal spray
375
Fatigue behavior of a 4340 steel coated with an electroless Ni-P deposit
376
Fatigue behavior of a 7075-T6 aluminum alloy coated with an electroless Ni–P deposit
377
Fatigue behavior of a cross-ply titanium matrix composite under tension-tension and tension-compression cycling
378
Fatigue behavior of a cross-ply titanium matrix composite under tension-tension and tension-compression cycling
379
Fatigue behavior of a high density powder metallurgy steel
380
Fatigue behavior of a high strength steel in vacuum, in air and in 3.5% NaCl solution under cathodic protection
381
Fatigue behavior of a high strength steel in vacuum, in air and in 3.5% NaCl solution under cathodic protection
382
Fatigue behavior of a high strength steel in vacuum, in air and in 3.5% NaCl solution under cathodic protection
383
Fatigue behavior of a Hi-Nicalon™/SiC–B4C composite at 1200 °C in air and in steam
384
Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening
385
Fatigue behavior of a multiphase medium carbon V-bearing microalloyed steel processed through two thermomechanical routes
386
Fatigue behavior of a multi-scale cement composite
387
Fatigue Behavior of a Pavement Foundation with Recycled Aggregate and Waste HDPE Strips
388
FATIGUE BEHAVIOR OF A PLASMA-SPRAYED 8%Y2O3-ZrO2 THERMAL BARRIER COATING
389
Fatigue behavior of a rolled AZ31 magnesium alloy after surface treatment by EP and BB conditions
390
Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal spray
391
Fatigue Behavior of a Steel-Free FRP-Concrete Modular Bridge Deck System
392
Fatigue behavior of a structural steel coated with a WC–10Co–4Cr/Colmonoy 88 deposit by HVOF thermal spraying
393
Fatigue behavior of a thermal barrier coated superalloy at 800 °C
394
Fatigue behavior of a thermally sprayed low carbon steel coating
395
Fatigue behavior of a thermally sprayed low carbon steel coating
396
Fatigue behavior of a thin gage Ni alloy after exposure to elevated temperature
397
Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC–10Co–4Cr cermet by HVOF thermal spray
398
Fatigue behavior of AA7075-T6 aluminum alloy coated with ZrN by PVD
399
Fatigue behavior of adhesively connected pultruded GFRP profiles
400
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys Original Research Article
401
Fatigue behavior of Al18B4O33 whisker-framework reinforced Al matrix composites at high temperatures
402
Fatigue behavior of Al2O3-based composite with BaTiO3 piezoelectric phase
403
Fatigue behavior of aluminum 5754-O and 6111-T4 spot friction welds in lap-shear specimens
404
Fatigue behavior of aluminum alloys under biaxial loading
405
Fatigue behavior of an epoxy polymer subjected to cyclic shear loading
406
Fatigue behavior of an insulation system for the ITER magnets in the load and strain controlled mode
407
Fatigue behavior of anodized AM60 magnesium alloy under humid environment
408
Fatigue behavior of arc melted Ti–13Nb–13Zr alloy
409
Fatigue behavior of AZ31 magnesium alloy produced by solid-state recycling
410
Fatigue behavior of bainitic and martensitic super clean Cr–Si high strength steels
411
Fatigue behavior of bonded and sandwich systems for strengthening orthotropic bridge decks
412
Fatigue behavior of bulk-metallic glasses
413
Fatigue behavior of calcium carbonate filled polypropylene under high frequency loading
414
Fatigue Behavior of Cemented Carbide Die in Cold Forging of Steel
415
Fatigue behavior of CFRP cross-ply laminates under on-axis and off-axis cyclic loading
416
Fatigue behavior of coated and uncoated cast Inconel 713LC at 800 °C
417
Fatigue behavior of columnar-grained Cu with preferentially oriented nanoscale twins Original Research Article
418
Fatigue behavior of cross-ply glass-fiber composites based on epoxy resins of different toughnesses
419
Fatigue behavior of Cu-Al-Be shape memory single crystals
420
Fatigue behavior of Cu-Al-Be shape memory single crystals
421
Fatigue behavior of damaged steel beams repaired with CFRP strips
422
Fatigue behavior of dense asphalt mixes in dry and environmental-conditioning states
423
Fatigue behavior of diffusion bonded powder metallurgy steel with heterogeneous microstructure
424
Fatigue behavior of dissimilar spot friction welds in lap-shear and cross-tension specimens of aluminum and steel sheets
425
Fatigue behavior of duplex treated TiCxN1−x- and Ti1−xAlxN-hard coating steel compounds
426
Fatigue behavior of duplex-treated samples coated with Cr(C,N) film
427
Fatigue behavior of ferritic–pearlitic–bainitic steel in loading with positive mean stress
428
Fatigue behavior of ferroelectric ceramics under mechanically–electrically coupled cyclic loads
429
Fatigue behavior of fiber-reinforced concrete in compression
430
Fatigue behavior of friction plug welds in 2195 Al–Li alloy
431
Fatigue behavior of functionally graded steel produced by electro-slag remelting
432
Fatigue Behavior of High Speed Steel Roll Materials for Hot Rolling by Laser Impacting Original Research Article
433
Fatigue behavior of high-Mn TWIP steels
434
Fatigue behavior of hot-rolled steel plate at various stages of fabrication
435
Fatigue behavior of impact comminution and attrition units
436
Fatigue behavior of impacted composite structures Review Article
437
Fatigue behavior of integrally fabricated joints between titanium matrix composite and titanium alloy
438
Fatigue behavior of laminated composites with a circular hole under in-plane multiaxial loading
439
Fatigue behavior of laminated composites with a circular hole under in-plane uniaxial random loading
440
Fatigue behavior of laser consolidated IN-625 at room and elevated temperatures
441
Fatigue behavior of laser welds in lap-shear specimens of high strength low alloy steel sheets
442
Fatigue behavior of laser-welded NiTi wires in small-strain cyclic bending
443
Fatigue behavior of nanocrystalline metals and alloys
444
Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling
445
Fatigue behavior of nitrided and shot peened steel with artificial small surface defects
446
Fatigue behavior of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass reinforced composites
447
Fatigue behavior of notched steel beams reinforced with bonded CFRP plates: Determination of prestressing level for crack arrest
448
Fatigue behavior of notched steel specimens with nanocrystallized surface obtained by severe shot peening
449
Fatigue behavior of packable composites
450
Fatigue behavior of plain C–Mn steel plates with fine grained ferrite in surface layers
451
Fatigue behavior of porous biomaterials manufactured using selective laser melting
452
Fatigue behavior of powder metallurgy high-speed steels: fatigue limit prediction using a crack growth threshold-based approach
453
Fatigue behavior of powder metallurgy high-speed steels: fatigue limit prediction using a crack growth threshold-based approach
454
Fatigue behavior of powder metallurgy high-speed steels: fatigue limit prediction using a crack growth threshold-based approach
455
Fatigue behavior of PVD coated Ti–6Al–4V alloy
456
Fatigue Behavior of RC Beams Strengthened with GFRP Sheets
457
Fatigue behavior of RC beams strengthened with prestressed NSM CFRP rods
458
Fatigue behavior of RC T-beams strengthened in shear with CFRP sheets
459
Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings
460
Fatigue Behavior of Reinforced Concrete Beams Strengthened with Carbon Fiber Reinforced Plastic Laminates
461
Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced polymer
462
Fatigue behavior of resin composites in aqueous environments
463
Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives
464
Fatigue behavior of SiC particulate reinforced spray-formed 7XXX series Al-alloys
465
Fatigue behavior of sisal fiber reinforced cement composites
466
Fatigue behavior of SMA and HMA mixtures
467
Fatigue behavior of spot friction welds in lap-shear and cross-tension specimens of dissimilar aluminum sheets
468
Fatigue Behavior of Steel Beam Coated with Nanoparticles under High Temperature
469
Fatigue behavior of surface modified Ti-6Al-4V alloy by double glow discharge plasma alloying
470
Fatigue behavior of tailor (laser)-welded blanks for automotive applications
471
Fatigue behavior of the aeronautical Al–Li (2198) aluminum alloy under constant amplitude loading
472
Fatigue behavior of thin-walled grade 2 titanium samples processed by selective laser melting. Application to life prediction of porous titanium implants
473
Fatigue behavior of Ti6Al4V and 316 LVM blasted with ceramic particles of interest for medical devices
474
Fatigue behavior of Ti–6Al–4V foams processed by magnesium space holder technique
475
Fatigue behavior of TiNi foams processed by the magnesium space holder technique
476
Fatigue behavior of ultrafine-grained and coarse-grained Cr–Ni austenitic stainless steels
477
Fatigue behavior of ultrafine-grained Ti–24Nb–4Zr–8Sn multifunctional biomedical titanium alloy
478
Fatigue behavior of ultrafine-grained Ti–6Al–4V ‘ELI’ alloy for medical applications
479
Fatigue behavior of very high strength (VHS) circular steel tube to plate T-joints under in-plane bending
480
Fatigue Behavior of Welded Aluminum Light Pole Support Details
481
Fatigue behavior of welded coverplates treated with Ultrasonic Impact Treatment and bolting
482
Fatigue behavior of welded joint spray fused by nickel-base alloy powder
483
Fatigue behavior of X70 microalloyed steel after severe shot peening
484
Fatigue behavior of Zr52.5Al10Ti5Cu17.9Ni14.6 bulk metallic glass
485
Fatigue behavior of Zr-based bulk-metallic glasses
486
Fatigue behavior of Zr–Ti–Ni–Cu–Be bulk-metallic glasses
487
Fatigue behavior on weldment of austenitic stainless steel for ITER vacuum vessel
488
Fatigue Behavior Optimization of the 16MnCr5 Steel Used in Machine Tool Spindle via Different Surface Treatments
489
Fatigue behavior prediction of welded joints by using an integrated fracture mechanics approach
490
Fatigue behaviors of self-piercing rivets joining similar and dissimilar sheet metals
491
Fatigue behaviors of square-to-square hollow section T-joint with corner crack. I: Experimental studies
492
Fatigue behaviors of square-to-square hollow section T-joint with corner crack. II: Numerical modeling
493
Fatigue behaviors of the Cu47.5Zr47.5Al5 bulk-metallic glass (BMG) and Cu47.5Zr38Hf9.5Al5 BMG composite
494
Fatigue behaviors prediction method of welded joints based on soft computing methods
495
Fatigue behaviour analysis of mechanical components subject to random bimodal stress process: frequency domain approach
496
Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy
497
Fatigue behaviour and damage evolution of single lap bonded joints in composite material
498
Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing
499
Fatigue behaviour and fracture mechanism of a rolled AZ31 magnesium alloy
500
Fatigue behaviour and fracture mechanism of cryogenically treated En 353 steel
501
Fatigue behaviour and life assessment of composite laminates under multiaxial loadings
502
Fatigue behaviour and life prediction of fibre reinforced metal laminates under constant and variable amplitude loading
503
Fatigue behaviour and life prediction of lateral notched round bars under bending–torsion loading
504
Fatigue behaviour and lifing of two single crystal superalloys
505
Fatigue behaviour at elevated temperature of friction stir channelling solid plates of AA5083-H111 aluminium alloy
506
Fatigue behaviour of 2011-T6 aluminium alloy coated with PVD WC/C, PA-CVD DLC and PE-CVD SiOx coatings
507
Fatigue behaviour of a box-welded joint under biaxial cyclic loading: effects of biaxial load range ratio and cyclic compressive loads in the lateral direction
508
Fatigue behaviour of a box-welded joint under biaxial cyclic loads
509
Fatigue behaviour of a nickel alloyed sintered steel
510
Fatigue behaviour of a nickel alloyed sintered steel
511
Fatigue Behaviour of a Rolled AZ31 Magnesium Alloys Prepared by EP and BB Conditions
512
Fatigue behaviour of AA356-T6 cast aluminium alloy weakened by cracks and notches
513
Fatigue behaviour of AA6082 friction stir welds under variable loadings
514
Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing
515
Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding
516
Fatigue behaviour of Al2024-T3 friction stir welded lap joints
517
Fatigue behaviour of AlMgSi tubular specimens subjected to bending–torsion loading
518
Fatigue behaviour of alumina-fibre-reinforced epoxy resin composite pipes under tensile and compressive loading conditions
519
Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds
520
Fatigue behaviour of an autofrettaged high-pressure vessel for the food industry
521
Fatigue behaviour of bare and pre-corroded magnesium alloy AZ31
522
Fatigue behaviour of boron free and boron containing heat treated Ti-13Zr-13Nb alloy for biomedical applications
523
Fatigue behaviour of carbon fibre reinforced plastic under spectrum loading
524
Fatigue behaviour of cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure
525
Fatigue behaviour of CFRP L-shaped plates for shear strengthening of RC T-beams
526
Fatigue behaviour of CFRP strengthened steel plates with different degrees of damage
527
Fatigue behaviour of Co–Cr laser cladded steel plates for railway applications
528
Fatigue behaviour of composite adhesive lap joints
529
Fatigue behaviour of continuous glass fibre reinforced composites
530
Fatigue behaviour of dental composite materials
531
Fatigue behaviour of dental composite materials
532
Fatigue behaviour of duplex stainless steels in the very high cycle regime
533
Fatigue behaviour of Fe–Cr–Si–B metallic glass wires
534
Fatigue behaviour of friction stir processed AZ91 magnesium alloy produced by high pressure die casting
535
Fatigue behaviour of Friction Stir Welded aluminium bridge deck segment
536
Fatigue behaviour of friction stir welds without neither welding flash nor flaw in several aluminium alloys
537
Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints
538
Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling
539
Fatigue behaviour of graphite and interpenetrating graphite–aluminium composite up to 109 load cycles Original Research Article
540
Fatigue behaviour of helical compression springs at a very high number of cycles – Investigation of various influences
541
Fatigue behaviour of interlocking grouted stabilised mud-fly ash brick masonry
542
Fatigue behaviour of laser machined 2024 T3 aeronautic aluminium alloy
543
Fatigue behaviour of laser repairing welded joints
544
Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation: An overview
545
Fatigue behaviour of low temperature carburised AISI 316L austenitic stainless steel
546
Fatigue behaviour of mechanically fastened aluminium joints tested in spectrum loading
547
Fatigue behaviour of metal pin-reinforced composite single-lap joints in a hygrothermal environment
548
Fatigue behaviour of monotectoid-based Zn–Al–Cu alloys in 3.5% NaCl and 1% HCl solutions
549
Fatigue behaviour of mullite studied by the indentation flexure method
550
Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing of poly(aliphatic/aromatic-ester) copolymers
551
Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-ester) copolymers
552
Fatigue behaviour of multiblock thermoplastic elastomers. 3. Stepwise increasing strain test of poly(aliphatic/aromatic-ester) copolymers
553
Fatigue Behaviour of Naval Steel Under Seawater Environmental and Variable Loading Conditions Original Research Article
554
Fatigue behaviour of nickel–titanium superelastic wires and endodontic instruments
555
Fatigue behaviour of Nitinol peripheral stents: The role of plaque shape studied with computational structural analyses
556
Fatigue behaviour of notched specimens of friction stir welded aluminium alloy 6063-T6
557
Fatigue behaviour of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites
558
Fatigue behaviour of post weld heat treated electron beam welded AA2219 aluminium alloy joints
559
Fatigue behaviour of punched structural plates
560
Fatigue behaviour of rail steel—a comparison between strain and stress controlled loading
561
Fatigue behaviour of recycled tyre rubber-filled concrete and its implications in the design of rigid pavements
562
Fatigue behaviour of riveted Glare lap joints
563
Fatigue behaviour of SiC-particulate-reinforced aluminium alloy composites with different particle sizes at elevated temperatures
564
Fatigue behaviour of SiCp-reinforced aluminium composites in the very high cycle regime using ultrasonic fatigue
565
Fatigue behaviour of steel fibre reinforced concrete in direct compression
566
Fatigue behaviour of steel fibre reinforced concrete in direct compression
567
Fatigue behaviour of T welded joints rehabilitated by tungsten inert gas and plasma dressing
568
Fatigue behaviour of tensile steel/CFRP joints
569
Fatigue behaviour of tensile-shear loaded clinched joints
570
Fatigue behaviour of timber–concrete composite connections and floor beams
571
Fatigue behaviour of T-joints for marine applications
572
Fatigue behaviour of tubular AlMgSi welded specimens subjected to bending–torsion loading
573
Fatigue behaviour of welded joints with cracks, repaired by hammer peening
574
Fatigue behaviour of young ostrich pericardium
575
Fatigue capacity of side longitudinals in floating structures
576
Fatigue characteristics and fatigue limit prediction of an induction case hardened Cr–Mo steel alloy
577
Fatigue characteristics and fatigue limit prediction of an induction case hardened Cr–Mo steel alloy
578
Fatigue characteristics of a type 304 austenitic stainless steel in hydrogen gas environment
579
Fatigue Characteristics of Asphalt Concrete from Asphalt Slab Tests
580
Fatigue characteristics of bioactive glass-ceramic-coated Ti–29Nb–13Ta–4.6Zr for biomedical application
581
Fatigue characteristics of foam core sandwich composites
582
Fatigue characteristics of granular materials
583
Fatigue characteristics of high performance fiber-reinforced concrete
584
Fatigue characteristics of high strength C70S6 and SMA40 steels
585
Fatigue characteristics of metal impregnated C/C composites with slots for load transfer
586
Fatigue characteristics of metallic biomaterials
587
Fatigue characteristics of nitrided SACM 645 according to the nitriding condition and notch
588
Fatigue characteristics of nitrided SACM 645 according to the nitriding condition and notch
589
Fatigue characteristics of quasi-isotropic CFRP laminates subjected to variable amplitude cyclic two-stage loading
590
Fatigue characteristics of stainless steel pin-reinforced composite hat joints
591
Fatigue characteristics of steel-making slag concrete under compression in submerged condition
592
Fatigue characteristics of the bolted joints for unidirectional composite laminates
593
Fatigue characterization and modeling of 30CrNiMo8HH under multiaxial loading
594
Fatigue characterization and modeling of AZ31B magnesium alloy spot-welds
595
Fatigue Characterization of High Performance Hybrid Aluminium AA 5083/SiCp/Fly Ash Metal Matrix Composites
596
Fatigue Characterization of Laminated Composites used in Prosthetic Sockets Manufacturing
597
Fatigue control of thin-walled structures
598
Fatigue corrosion crack extension across the interface of an elastic bi-material
599
Fatigue crack acceleration effects during tensile underloads in 7010 and 8090 aluminium alloys
600
Fatigue crack analysis of EBR-II Ni-bonded duplex tubing
601
Fatigue crack closure analysis of bridged cracks representing composite repairs
602
Fatigue crack closure determination by means of finite element analysis
603
Fatigue crack closure of a corner crack: A comparison of experimental results with finite element predictions
604
Fatigue crack closure: From LCF to small scale yielding
605
Fatigue crack constraint in plain-woven CFRP using newly-developed spread tows
606
Fatigue crack formation and growth from localized corrosion in Al–Zn–Mg–Cu
607
Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding
608
Fatigue crack growth – Mode I cycles with periodic Mode II loading
609
Fatigue crack growth acceleration caused by irreversible hydrogen desorption in high-strength steel and its mechanical condition
610
Fatigue crack growth along interface between metal and ceramics submicron-thick films in inert environment
611
Fatigue crack growth along interface between metal and ceramics submicron-thick films in inert environment Original Research Article
612
Fatigue crack growth analysis by an enriched meshless method
613
Fatigue crack growth analysis in porous ductile cast iron microstructure
614
Fatigue crack growth analysis of 2024 T3 aluminium specimens under aircraft service spectra
615
Fatigue crack growth analysis of assembled plate structures with dual boundary element method
616
Fatigue crack growth analysis of fiber reinforced concrete with effect of interfacial bond degradation
617
Fatigue Crack Growth Analysis of Polymonochlorotrifluoroethylene (CTFE)
618
Fatigue Crack Growth Analysis of Polymonochlorotrifluoroethylene (CTFE)
619
Fatigue crack growth analysis of pre-strained 7475–T7351 aluminum alloy
620
Fatigue crack growth analysis of stiffened cracked panel repaired with bonded composite patch
621
Fatigue crack growth analysis of welded aluminium RHS T-joints with manipulated residual stress level
622
Fatigue crack growth analysis using 2-D weight function
623
Fatigue crack growth and closure behavior under random loadings in 7475-T7351 aluminum alloy
624
Fatigue crack growth and closure in fine-grained aluminium alloys
625
Fatigue crack growth and crack closure in an AlMgSi alloy
626
Fatigue crack growth and craze-induced crack tip shielding in polycarbonate
627
Fatigue crack growth and failure of inelastic rods based on rheological–dynamical analogy
628
Fatigue crack growth and fracture paths in sand cast B319 and A356 aluminum alloys
629
Fatigue crack growth and fracture paths in sand cast B319 and A356 aluminum alloys
630
Fatigue crack growth and fracture paths in sand cast B319 and A356 aluminum alloys
631
Fatigue crack growth and life prediction of foam core sandwich composites under flexural loading
632
Fatigue crack growth and life predictions under variable amplitude loading for a cast and wrought aluminum alloy
633
Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ Original Research Article
634
Fatigue crack growth and propagation along the adhesive interface between fiber-reinforced composites
635
Fatigue crack growth and thresholds at ultrasonic frequencies
636
Fatigue crack growth assessments in welded components including crack closure effects: Experiments and 3-D numerical modeling
637
Fatigue crack growth at the face sheet-core interface in a discontinuous ceramic-tile cored sandwich structure
638
Fatigue crack growth behavior and microstructure of reduced activation ferritic/martensitic steel (JLF-1)
639
Fatigue crack growth behavior and plane-strain fracture toughness of a multicomponent Nb–Ti–Al alloy
640
Fatigue crack growth behavior and plane-strain fracture toughness of a multicomponent Nb–Ti–Al alloy
641
Fatigue crack growth behavior in a welded α-β Ti-Al-Mn alloy in relation to micro structural features
642
Fatigue crack growth behavior in a welded α-β Ti-Al-Mn alloy in relation to micro structural features
643
Fatigue crack growth behavior in ferritic–pearlitic steels with networked and distributed pearlite structures
644
Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure
645
Fatigue crack growth behavior in semi-liquid die-cast Al-7%Si-0.4%Mg alloys with fine effective grain structure
646
Fatigue crack growth behavior in weld-repaired high-strength low-alloy steel
647
Fatigue crack growth behavior of 95Pb–5Sn solder under various stress ratios and frequencies
648
Fatigue crack growth behavior of 96.5Sn–3.5Ag lead-free solder
649
Fatigue crack growth behavior of a coarse- and a fine-grained high manganese austenitic twin-induced plasticity steel
650
Fatigue crack growth behavior of a newly developed Ni–Co-base superalloy TMW-2 at elevated temperatures
651
Fatigue crack growth behavior of Al–Mg–Sc alloy
652
Fatigue crack growth behavior of cracked aluminum plate repaired with composite patch
653
Fatigue crack growth behavior of fine-grained steel S460N under proportional and non-proportional loading
654
Fatigue crack growth behavior of hybrid and prealloyed sintered steels: Part I. Microstructure characterization
655
Fatigue crack growth behavior of hybrid and prealloyed sintered steels: Part II. Fatigue behavior
656
Fatigue crack growth behavior of JLF-1 steel including TIG weldments
657
Fatigue crack growth behavior of off-axis Ti–6Al–4V/SCS-6 metal matrix composites
658
Fatigue crack growth behavior of RAFM steel in Paris and threshold regimes at different temperatures
659
Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings
660
Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings
661
Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings
662
Fatigue crack growth behavior of silica particulate reinforced epoxy resin composite
663
Fatigue crack growth behavior of Sn–Pb and Sn-based lead-free solders
664
Fatigue crack growth behavior of the simulated HAZ of 800 MPa grade high-performance steel
665
Fatigue crack growth behavior of Ti–6Al–4V alloy forging
666
Fatigue crack growth behavior of titanium alloys
667
Fatigue crack growth behavior of titanium foams for medical applications
668
Fatigue crack growth behaviors in hot-rolled low carbon steels: A comparison between ferrite–pearlite and ferrite–bainite microstructures
669
Fatigue crack growth behaviour and life prediction for 2324-T39 and 7050-T7451 aluminium alloys under truncated load spectra
670
Fatigue crack growth behaviour in austenitic stainless steels subjected to superficial and entire hydrogenation
671
Fatigue crack growth behaviour in ferritic ductile iron with surface crack under reverse bending
672
Fatigue crack growth behaviour in titanium aluminides
673
Fatigue crack growth behaviour in titanium aluminides
674
Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450 °C and 600 °C
675
Fatigue crack growth behaviour of A533B steel in pressurized water at 288 and 28 °C
676
FATIGUE CRACK GROWTH BEHAVIOUR OF FIBRE-METAL LAMINATE GLARE-1 AND METAL LAMINATE 7475 WITH DIFFERENT BLUNT NOTCHES
677
Fatigue crack growth behaviour of gas tungsten arc, electron beam and laser beam welded Ti–6Al–4V alloy
678
FATIGUE CRACK GROWTH BEHAVIOUR OF METALLIC BIOMATERIALS IN A PHYSIOLOGICAL ENVIRONMENT
679
Fatigue crack growth behaviour of pulsed current gas tungsten arc, friction stir and laser beam welded AZ31B magnesium alloy joints
680
FATIGUE CRACK GROWTH BEHAVIOUR OF SM45C STEEL UNDER CYCLIC MODE I WITH SUPERIMPOSED STATIC MODE II LOADINGS
681
FATIGUE CRACK GROWTH BEHAVIOUR OF SM45C STEEL UNDER MIXED-MODE I AND II LOADING
682
Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings
683
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure
684
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure
685
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure
686
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data
687
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data
688
Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data
689
Fatigue crack growth characterization and simulation of a porous steel
690
Fatigue crack growth characterization and simulation of a porous steel
691
FATIGUE CRACK GROWTH DUE TO TWO SUCCESSIVE SINGLE OVERLOADS
692
Fatigue crack growth estimation by relevance vector machine
693
Fatigue crack growth experiments on specimens subjected to monotonic large scale yielding
694
Fatigue crack growth for a surface crack in a round bar under multi-axial loading condition
695
Fatigue crack growth for straight-fronted edge crack in a round bar
696
Fatigue crack growth from corrosion damage in 7075-T6511 aluminium alloy under aircraft loading
697
Fatigue crack growth from flaws in combat aircraft
698
Fatigue crack growth from foreign object damage under combined low and high cycle loading. Part I: Experimental studies
699
Fatigue crack growth from foreign object damage under combined low and high cycle loading. Part II: A two-parameter predictive approach
700
Fatigue crack growth from plain and cold expanded holes in aluminium alloys
701
Fatigue crack growth from small defects under out-of-phase combined loading
702
Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures
703
Fatigue crack growth from small to long cracks in very-high-cycle fatigue with surface and internal "fish-eye" failures for ferrite-perlitic low carbon steel SAE 8620
704
Fatigue crack growth from small to long cracks in very-high-cycle fatigue with surface and internal “fish-eye” failures for ferrite-perlitic low carbon steel SAE 8620
705
Fatigue crack growth from small to long cracks in VHCF with surface initiations
706
Fatigue crack growth history in damage tolerance design of aircraft structures
707
Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects
708
Fatigue crack growth in a coarse-grained iron–silicon alloy
709
Fatigue crack growth in a diverse range of materials
710
Fatigue crack growth in a Ni–Sn multilayered composite
711
Fatigue crack growth in a Ni–Sn multilayered composite
712
Fatigue crack growth in a structural steel under single and multiple periodic overload cycles
713
Fatigue crack growth in a Tiβ21s/SCS-6 composite Original Research Article
714
Fatigue crack growth in a welded rail under the influence of residual stresses
715
Fatigue crack growth in adhesively bonded composite-metal double-lap joints
716
Fatigue crack growth in an in-situ titanium matrix composite
717
Fatigue crack growth in an in-situ titanium matrix composite
718
Fatigue crack growth in asphalt and asphalt-interfaces
719
Fatigue crack growth in austempered ductile and grey cast irons—stress ratio effects in air and mine water
720
Fatigue crack growth in austempered ductile and grey cast irons—stress ratio effects in air and mine water
721
Fatigue crack growth in bonded DCB specimens
722
FATIGUE CRACK GROWTH IN D16T A1-ALLOY SHEET SUBJECTED TO BIAXIAL OUT-OF-PHASE LOADING
723
Fatigue crack growth in degrading elastic components of nonlinear structural systems under random loading
724
Fatigue crack growth in ferroelectrics under electrical loading
725
Fatigue crack growth in heat-treated aluminium alloys
726
Fatigue crack growth in inhomogeneous steel components
727
Fatigue crack growth in interstitially hardened AISI 316L stainless steel
728
Fatigue crack growth in laser-shock-peened Ti–6Al–4V aerofoil specimens due to foreign object damage
729
Fatigue crack growth in magnesium single crystals under cyclic loading: Molecular dynamics simulation
730
Fatigue crack growth in nano-composites
731
Fatigue crack growth in nickel-based superalloys at elevated temperatures
732
Fatigue Crack Growth in Plastically Compressible Solids: Role of Negative Stress Ratio, Plastic Compressibility and Strain Softening
733
Fatigue crack growth in polycrystalline IN 718 superalloy
734
Fatigue crack growth in railway axles: Assessment concept and validation tests
735
Fatigue crack growth in random residual stresses
736
Fatigue crack growth in real structures
737
Fatigue crack growth in SiC particulates reinforced Al matrix graded composite
738
Fatigue crack growth in SiC particulates reinforced Al matrix graded composite
739
Fatigue crack growth in some PM low alloy steels consolidated by rotary forging and sintering
740
Fatigue crack growth in stiffened steel tubular joints in seawater environment
741
Fatigue crack growth in the aluminium alloy D16 under constant and variable amplitude loading
742
Fatigue crack growth in the D16CzATW aluminium alloy in the presence of a calibrated hole under simple bending
743
Fatigue crack growth in thin aluminium alloy sheets under loading sequences with periodic overloads
744
Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: Experimental
745
Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: Modelling
746
Fatigue Crack Growth in Thin-Wall Pipes Subjected to Bending
747
Fatigue crack growth in TRIP steel under positive R-ratios
748
FATIGUE CRACK GROWTH IN TWO ADVANCED TITANIUM ALLOYS UNDER CONSTANT AND VARIABLE AMPLITUDE LOADING AT 25 AND 175 °C
749
Fatigue crack growth law for ferroelectrics under cyclic electrical and combined electromechanical loading
750
Fatigue crack growth measurement in a superalloy at elevated temperature
751
Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes
752
Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes
753
Fatigue crack growth mechanisms at the microstructure scale in Al–Si–Mg cast alloys: Mechanisms in the near-threshold regime Original Research Article
754
Fatigue crack growth mechanisms in HSLA-80 steels
755
Fatigue crack growth mechanisms in HSLA-80 steels
756
Fatigue crack growth mechanisms in steels
757
Fatigue crack growth model for a thin steel plate containing hydrogen
758
Fatigue crack growth model for constant amplitude loading
759
Fatigue crack growth modeling of attachment lugs
760
Fatigue crack growth modeling of pipeline steels in high pressure gaseous hydrogen
761
Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion–tension loading
762
Fatigue crack growth of a double fillet weld
763
Fatigue crack growth of a welded tube–flange connection under bending and torsional loading
764
Fatigue crack growth of AA2219 under different aging conditions
765
Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen
766
Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen
767
Fatigue crack growth of bonded composite repairs in gigacycle regime
768
Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure
769
Fatigue crack growth of filled rubber under constant and variable amplitude loading conditions
770
Fatigue crack growth of SiC particle reinforced metal matrix composites
771
Fatigue crack growth of UDIMET 720 Li superalloy at elevated temperature
772
Fatigue crack growth performance of peened friction stir welded 2195 aluminum alloy joints at elevated and cryogenic temperatures
773
Fatigue crack growth prediction accounting for the damage zone
774
Fatigue crack growth prediction in a gas turbine casing
775
Fatigue crack growth prediction in concrete slabs
776
Fatigue crack growth prediction in GLARE hybrid laminates
777
Fatigue crack growth prediction in GLARE hybrid laminates
778
Fatigue crack growth predictions based on damage accumulation calculations ahead of the crack tip
779
Fatigue crack growth rate behaviour of friction-stir aluminium alloy AA2024-T3 welds under transient thermal tensioning
780
Fatigue crack growth rate model for metallic alloys
781
Fatigue crack growth rates and paths in two planar specimens under mixed mode loading
782
FATIGUE CRACK GROWTH RATES IN Al–Li ALLOY, 2090. INFLUENCE OF ORIENTATION, SHEET THICKNESS AND SPECIMEN GEOMETRY
783
Fatigue crack growth rates under sequential mixed-mode I and II loading cycles
784
Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites
785
Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites
786
Fatigue crack growth resistance of ECAPed ultrafine-grained copper
787
Fatigue crack growth resistance of gas tungsten arc, electron beam and friction stir welded joints of AA2219 aluminium alloy
788
Fatigue crack growth retardation in an HSLA steel in benign environments
789
Fatigue crack growth simulation in a first stage of compressor blade
790
Fatigue crack growth simulation in a generator fan blade
791
Fatigue crack growth simulation in heterogeneous material using s-version FEM
792
Fatigue crack growth simulation of aluminium alloy under spectrum loadings
793
Fatigue crack growth simulations of 3-D problems using XFEM
794
Fatigue crack growth simulations of 3-D problems using XFEM
795
Fatigue crack growth studies under mixed-mode loading
796
Fatigue crack growth study of CFRP patch repaired Al 2014-T6 panel having an inclined center crack using FEA and DIC
797
Fatigue crack growth testing of the Super CMV hollow shafts under combined torsional and axial loading
798
Fatigue crack growth threshold conditions at notches. Part I: theory
799
Fatigue crack growth threshold conditions at notches. Part II: generalization and application to experimental results
800
Fatigue crack growth through particulate clusters in polycarbonate material
801
Fatigue crack growth towards the weld interface of alloy and maraging steels
802
Fatigue crack growth under combined thermal cycling and mechanical loading
803
Fatigue crack growth under flight spectrum loading with superposed biaxial loading due to fuselage cabin pressure
804
Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel
805
FATIGUE CRACK GROWTH UNDER ULTRASONIC FATIGUE LOADING
806
Fatigue crack growth under variable amplitude loading Part I: experimental investigations
807
Fatigue crack growth under variable amplitude loading Part II: analytical and numerical investigations
808
Fatigue crack growth under variable-amplitude loading: Part I – Model formulation in state-space setting
809
Fatigue crack growth under variable-amplitude loading: Part II – Code development and model validation
810
Fatigue crack growth with overloads/underloads: Interaction effects and surface roughness
811
Fatigue crack growth—Microstructure relationships in a high-manganese austenitic TWIP steel
812
Fatigue crack healing by a controlled high density electric current field
813
Fatigue crack initiation and crystallographic crack growth in an austenitic stainless steel
814
Fatigue crack initiation and fracture behavior of a copper bicrystal with a perpendicular grain boundary
815
Fatigue crack initiation and fracture behavior of a copper bicrystal with a perpendicular grain boundary
816
Fatigue crack initiation and growth at holes in a high strength bainitic roller bearing steel when loaded with non-proportional shear and compressive cycles
817
Fatigue crack initiation and growth behavior of Ti–6Al–4V under non-proportional multiaxial loading
818
Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography
819
Fatigue crack initiation and growth in A517 submerged arc welds under variable amplitude loading
820
Fatigue crack initiation and growth in AlMg4.5Mn butt weldments
821
Fatigue crack initiation and growth in solder alloys
822
Fatigue crack initiation and growth of 16MnR steel with stress ratio effects
823
Fatigue crack initiation and growth on a steel in the very high cycle regime with sea water corrosion
824
Fatigue crack initiation and propagation behavior of forging die steels
825
Fatigue crack initiation and propagation in A356 alloy reinforced with in situ TiB2 particles
826
Fatigue crack initiation and propagation in an α-iron polycrystal
827
Fatigue crack initiation and propagation in an α-iron polycrystal
828
Fatigue crack initiation and propagation under cyclic contact loading
829
Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters
830
Fatigue crack initiation at a notch
831
Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel
832
Fatigue crack initiation in fibre-metal laminate glare 2
833
Fatigue crack initiation in fibre-metal laminate glare 2
834
Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminates
835
Fatigue crack initiation life prediction of railroad wheels
836
Fatigue crack initiation life prediction of ultra-fine grain chromium–bronze prepared by equal-channel angular pressing
837
Fatigue crack initiation point of load carrying cruciform joints in low and high cycle fatigue regions
838
Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy
839
Fatigue crack investigation for the Arkansas River Bridge in Hutchinson, Kansas
840
Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage
841
Fatigue crack nucleation and growth behaviors of laser melting deposited Ti–6Al–2Zr–Mo–V
842
Fatigue crack nucleation and growth in filled natural rubber
843
Fatigue crack nucleation assisted by thermal activation
844
Fatigue crack nucleation assisted by thermal activation
845
Fatigue crack nucleation at interfaces
846
Fatigue crack nucleation at interfaces
847
Fatigue crack nucleation at interfaces
848
Fatigue crack nucleation in iron and a high strength low alloy steel
849
Fatigue crack nucleation in iron and a high strength low alloy steel
850
Fatigue crack nucleation: Mechanistic modelling across the length scales
851
Fatigue crack nuclei in austempered ductile cast iron
852
Fatigue crack orientation in NR and SBR under variable amplitude and multiaxial loading conditions
853
Fatigue crack path and threshold in Mode II and Mode III loadings
854
Fatigue crack path in Cu–Ni–Mo alloyed PM steel
855
Fatigue crack paths for inclined cracks and surface flaws under biaxial loading
856
Fatigue crack paths in AA2024-T3 when loaded with constant amplitude and simple underload spectra
857
Fatigue crack paths in coarse-grained magnesium
858
Fatigue crack propagation after overloading and underloading at negative stress ratios
859
Fatigue crack propagation analyses based on plastic energy approach
860
Fatigue crack propagation analysis for welded joint subjected to bending
861
Fatigue crack propagation analysis of surface cracks in pipe elbows
862
Fatigue crack propagation and fracture characteristics of in-situ titanium-matrix composites
863
Fatigue crack propagation and fracture mechanisms of wrought magnesium alloys in different environments
864
Fatigue crack propagation and local crack-tip strain behavior in TiNi shape memory fiber reinforced composite
865
Fatigue crack propagation and threshold for shallow micro-cracks under out-of-phase multiaxial loading in a gear steel
866
Fatigue crack propagation assessment based on residual stresses obtained through cut-compliance technique
867
Fatigue crack propagation at concrete–concrete bi-material interfaces
868
Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic
869
Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic
870
Fatigue crack propagation behavior in four-points bending specimens with multiple parallel edge notches at regular intervals
871
Fatigue crack propagation behavior in friction stir welding of AA6063-T5: Roles of residual stress and microstructure
872
Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses
873
Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses
874
Fatigue crack propagation behavior of an as-extruded magnesium alloy AZ80
875
Fatigue crack propagation behavior of friction stir welded 5083-H32 and 6061-T651 aluminum alloys
876
Fatigue crack propagation behavior of friction stir welded 5083-H32 Al alloy
877
Fatigue Crack Propagation Behavior of TiNi(50.6) Shape Memory Alloy
878
Fatigue crack propagation behavior of underfill materials in microelectronic packaging
879
Fatigue crack propagation behavior of underfill materials in microelectronic packaging
880
Fatigue crack propagation behaviour derived from S–N data in very high cycle regime
881
Fatigue crack propagation behaviour in ultra-fine grained low carbon steel
882
Fatigue crack propagation behaviour of steels with different microstructures
883
Fatigue crack propagation damaging micromechanisms in ductile cast irons
884
Fatigue crack propagation estimation of SUS 630 shaft based on fracture surface analysis under pitting corrosion condition
885
Fatigue crack propagation for a through thickness crack: a crack propagation law considering cyclic plasticity near the crack tip
886
Fatigue crack propagation from a cold-worked hole
887
Fatigue crack propagation from a hole in tubular specimens under axial and torsional loading
888
Fatigue crack propagation from a precrack under combined torsional and axial loading
889
Fatigue crack propagation in 2.25 Cr–1.0Mo steel weldments in air and hydrogen
890
Fatigue crack propagation in 2.25 Cr–1.0Mo steel weldments in air and hydrogen
891
Fatigue crack propagation in 7050-T7451 plate alloy
892
Fatigue crack propagation in a quasi-one-dimensional elasto-plastic model
893
Fatigue crack propagation in a sintered 2xxx series aluminium alloy
894
Fatigue crack propagation in aluminium alloy foams
895
FATIGUE CRACK PROPAGATION IN AUSTENITIC STAINLESS STEEL UNDER LOW FREQUENCY LOADING AND SALT WATER CONDITIONS
896
Fatigue crack propagation in cast duplex stainless steels: thermal ageing and microstructural effects
897
Fatigue crack propagation in cellular metals
898
Fatigue crack propagation in cold drawn steel
899
Fatigue crack propagation in cold drawn steel
900
Fatigue crack propagation in marine structures under seaway loading
901
Fatigue crack propagation in rocker and roller–rocker bearings of railway steel bridges
902
Fatigue crack propagation in some PM steels
903
Fatigue crack propagation in the wing to fuselage connection of the new trainer aircraft M346
904
Fatigue crack propagation in threshold regime under residual stresses
905
Fatigue crack propagation in Ti–6Al–4V subjected to high strain amplitudes
906
Fatigue crack propagation in titanium alloys with lamellar and bi-lamellar microstructures
907
Fatigue crack propagation in titanium alloys with lamellar and bi-lamellar microstructures
908
Fatigue crack propagation in ultrafine grained Al–Mg alloy
909
Fatigue crack propagation in β Ti–15Mo–5Zr–3Al alloy
910
Fatigue crack propagation in β Ti–15Mo–5Zr–3Al alloy
911
Fatigue crack propagation model for plain concrete – An analogy with population growth
912
Fatigue crack propagation monitoring by Acoustic Emission signal analysis
913
Fatigue crack propagation normal to a plasticity mismatched bimaterial interface
914
Fatigue crack propagation of 444 stainless steel welded joints in air and in 3%NaCl aqueous solution
915
Fatigue crack propagation of AZ61 magnesium alloy under controlled humidity and visualization of hydrogen diffusion along the crack wake
916
Fatigue crack propagation of multiple coplanar cracks with the coupled extended finite element/fast marching method
917
Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap
918
Fatigue crack propagation of through cracks in thin sheets under combined traction and bending stresses
919
Fatigue crack propagation prediction by cyclic plasticity damage accumulation models
920
Fatigue crack propagation properties of Ti–6Al–4V in vacuum environments
921
Fatigue crack propagation resistance in homogeneous and graded alumina–epoxy composites
922
Fatigue crack propagation resistance of a FeAl-based alloy
923
Fatigue crack propagation resistance of a FeAl-based alloy
924
Fatigue crack propagation resistance of a Ti48Al2Mn2Nb alloy in the as-cast condition
925
Fatigue crack propagation resistance of a Ti48Al2Mn2Nb alloy in the as-cast condition
926
Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene
927
Fatigue crack propagation simulation in an aircraft engine fan blade attachment
928
Fatigue crack propagation trajectories under mixed-mode cyclic loading
929
Fatigue crack propagation under gaseous hydrogen in a precipitation-hardened martensitic stainless steel
930
Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method Original Research Article
931
Fatigue crack shielding and deflection in plain bearings under large-scale yielding
932
Fatigue crack surface crystallography near crack initiating particle clusters in precipitation hardened legacy and modern Al–Zn–Mg–Cu alloys
933
Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites
934
Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites
935
Fatigue cracking and fracture behaviors of coarse-grained copper under cyclic tension–compression and torsion loadings
936
Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energy Original Research Article
937
Fatigue cracking from a corrosion pit in an aircraft bulkhead
938
Fatigue cracking in high-cycle- and very-high-cycle-fatigue areas of peened and unpeened Al-based alloys because of fretting damages
939
Fatigue cracking of a bare steel first wall in an inertial confinement fusion chamber
940
Fatigue cracking of an aircraft wheel
941
FATIGUE CRACKING POSSIBILITY ALONG GRAIN BOUNDARIES AND PERSISTENT SLIP BANDS IN COPPER BICRYSTALS
942
Fatigue cracking simulation based on crack closure effects in Al-based sheet materials subjected to biaxial cyclic loads
943
Fatigue cracks and failures in cement industry, shipbuilding and power plant facilities
944
Fatigue cracks emanating from sharp notches in high-strength aluminium alloys: The effect of loading direction, kinking, notch geometry and microstructure
945
Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing
946
Fatigue cracks in Eurofer 97 steel: Part I. Nucleation and small crack growth kinetics
947
Fatigue cracks in Eurofer 97 steel: Part II. Comparison of small and long fatigue crack growth
948
Fatigue cracks in longitudinal ribs of steel orthotropic deck
949
Fatigue cracks in railway bridge hangers due to wind induced vibrations – Failure analysis, measures and remaining service life estimation
950
Fatigue cracks nucleation on steel, acoustic emission and fractal analysis
951
Fatigue damage accumulation and residual strength assessment of CFRP laminates
952
Fatigue damage accumulation in carbon/epoxy laminated composites
953
Fatigue damage accumulation in cold-drawn patented steel wire under variable loading
954
Fatigue damage accumulation in Ni3Al and NiAl
955
Fatigue damage accumulation in Ni3Al and NiAl
956
Fatigue damage accumulation modelling in the range of complex low-cycle loadings – The strain approach and its experimental verification on the basis of EN AW-2007 aluminum alloy
957
Fatigue damage accumulation of cold expanded hole in aluminum alloys subjected to block loading
958
Fatigue damage analysis and life assessment under variable amplitude loading conditions
959
Fatigue damage analysis of aluminized glass fiber composites
960
Fatigue damage analysis of unidirectional metal matrix composites
961
Fatigue Damage Analysis on Body Shell of a Passenger Vehicle
962
Fatigue damage and crack growth under variable amplitude loading with reference to the counting methods of stress–strain ranges
963
Fatigue damage and environment interaction of polyester aluminized glass fiber composites
964
Fatigue damage and fracture behavior of tungsten fiber reinforced Zr-based metallic glassy composite
965
Fatigue damage and its interaction with hydrogen in martensitic steels
966
Fatigue damage and its interaction with hydrogen in martensitic steels
967
Fatigue damage and its localization in particulate metal matrix composites
968
Fatigue damage and its localization in particulate metal matrix composites
969
Fatigue damage assessment for a spectral model of non-Gaussian random loads
970
Fatigue damage assessment in AISI 8620 steel using Barkhausen noise
971
Fatigue damage assessment of corroded oil tanker details based on global and local stress approaches
972
Fatigue damage assessment of various welded joints under uniaxial loading based on energy methods
973
Fatigue damage behaviors of carbon fiber-reinforced epoxy composites containing nanoclay
974
Fatigue Damage Calculated by the Ratio-Method to Materials and Its Machine Part
975
Fatigue damage characterization and modeling of a triaxially braided polymer matrix composite at elevated temperatures
976
Fatigue damage detection in graphite/epoxy composites using sonic infrared imaging technique
977
Fatigue damage development in pure polycrystalline magnesium under cyclic tension–compression loading
978
Fatigue damage evaluation in SiCp/2024 by X-ray diffraction method
979
Fatigue damage evaluation of a power plant component from analysis of the dislocation structures
980
Fatigue damage evaluation of carbon fiber composite using aluminum foil based strain sensors
981
Fatigue damage evaluation of low-alloy steel welded joints in fusion zone and heat affected zone based on frequency response changes in gigacycle fatigue
982
Fatigue damage evaluation of notched specimens through resonance and anti-resonance data
983
Fatigue damage evolution in off-axis unidirectional CFRP
984
Fatigue damage evolution in SiC fiber-reinforced Ti-15-3 alloy matrix composite
985
Fatigue damage evolution in SiC fiber-reinforced Ti-15-3 alloy matrix composite
986
Fatigue damage in a unidirectional SiC/Al composite due to push-pull and zero-pull loading
987
Fatigue damage in a unidirectional SiC/Al composite due to push-pull and zero-pull loading
988
Fatigue damage in aircraft structures, not wanted, but tolerated?
989
Fatigue damage in cancellous bone: An experimental approach from continuum to micro scale
990
Fatigue damage in carbon black filled natural rubber under uni- and multiaxial loading conditions
991
Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold
992
Fatigue damage in nickel and copper single crystals at nanoscale
993
Fatigue damage in titanium-graphite hybrid laminates
994
Fatigue damage initiation and growth from artificial defects in Zr-based metallic glass Original Research Article
995
Fatigue damage leads to a serious traffic accident
996
Fatigue Damage Mechanism of Oil Film Bearing Sleeve Original Research Article
997
Fatigue damage mechanisms associated with ʹtear-dropʹ cracking in UDIMET 720
998
Fatigue damage mechanisms in advanced hybrid titanium composite laminates
999
Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30
1000
Fatigue damage mechanisms of copper single crystal/Sn–Ag–Cu interfaces