ليست عنوان مقالات لاتين Mechanical properties over the glass transition of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Mechanical properties over the glass transition of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass

2

Mechanical Properties Research on Suspended-dome Structure with Discontinuous Support Under Different Parameters

3

Mechanical properties study of a magnetron-sputtered Zr-based thin film metallic glass

4

Mechanical properties study of particles reinforced aluminum matrix composites by micro-indentation experiments

5

Mechanical properties up to 1100 °C of Al2O3–MgO-extruded graphite pellets castables reinforced with steel fibres

6

Mechanical properties with respect to water content of gelatin films in glassy state

7

Mechanical properties, anisotropic swelling behaviours and structures of jellyfish mesogloea

8

Mechanical properties, anisotropic swelling behaviours and structures of jellyfish mesogloea

9

Mechanical properties, bioactivity and corrosion resistance of oxygen and sodium plasma treated nickel titanium shape memory alloy

10

Mechanical properties, biocompatibility, and biodegradation of cross-linked cellulose acetate-reinforced polyester composites

11

Mechanical properties, biological activity and protein controlled release by poly(vinyl alcohol)–bioglass/chitosan–collagen composite scaffolds: A bone tissue engineering applications

12

Mechanical properties, defects and electronic behavior of carbon nanotubes Original Research Article

13

Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr)Nx multi-component coatings

14

Mechanical properties, degradation performance and cytotoxicity of Mg–Zn–Ca biomedical alloys with different compositions

15

Mechanical properties, density and quantitative CT scan data of trabecular bone with and without metastases

16

Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum

17

Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying

18

Mechanical properties, electrochemical corrosion and in-vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying

19

Mechanical properties, electronic structure and bonding of α- and β-tricalcium phosphates with surface characterization

20

Mechanical properties, fire performance and thermal stability of magnesium hydroxide sulfate hydrate whiskers flame retardant silicone rubber

21

Mechanical properties, flammability and char morphology of epoxy resin/montmorillonite nanocomposites

22

Mechanical properties, hydrophilicity and water activity of starch-gum films: effect of additives and deacetylated xanthan gum

23

Mechanical properties, microstructure and crystal structures of Al98−3xCu2xFexCe1Zr1 (x = 1–3 at.%) alloys extruded from their atomized powders

24

Mechanical properties, microstructure and crystal structures of Al98−3xCu2xFexCe1Zr1 (x = 1–3 at.%) alloys extruded from their atomized powders

25

Mechanical properties, microstructure and micro-texture evolution for 1050AA deformed by equal channel angular pressing (ECAP) and post ECAP plane strain compression using two loading schemes

26

Mechanical properties, microstructure and texture of single pass equal channel angular pressed 1050, 5083, 6082 and 7010 aluminum alloys with different dies

27

Mechanical properties, microstructure, and fracture behavior of friction stir welded AA7075 joints with conical pin and conical threaded pin type tools

28

Mechanical properties, modeling and design of porous clay ceramics

29

Mechanical properties, morphologies, and crystallization behavior of plasticized poly(l-lactide)/poly(butylene succinate-co-l-lactate) blends

30

Mechanical properties, morphology and molecular characteristics of poly(ethylene terephthalate) toughened by natural rubber

31

Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate)

32

Mechanical properties, phases and microstructure of ultrafine hardmetals prepared by WC–6.29Co nanocrystalline composite powder

33

Mechanical properties, phases and microstructure of ultrafine hardmetals prepared by WC–6.29Co nanocrystalline composite powder

34

Mechanical properties, phenolic composition and extractability indices of Barbera grapes of different soluble solids contents from several growing areas Original Research Article

35

Mechanical properties, proteolytic degradability and biological modifications affect angiogenic process extension into native and modified fibrin matrices in vitro

36

Mechanical Properties, Purifying Techniques and Processing Methods of Metal Yttrium

37

Mechanical properties–microstructure correlation in neutron irradiated heat-affected zones of austenitic stainless steels

38

Mechanical property analysis of stored red blood cell using optical tweezers

39

Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade

40

Mechanical property and dimensional stability of substrates for magnetic tapes

41

Mechanical property and fracture behavior of strip cast Zr-base BMG alloy containing crystalline phase

42

Mechanical property and fracture characteristic of induction brazed joints of TiAl-based intermetallics to steel 35CrMo with Ag–Cu–Ni–Li filler

43

Mechanical property and in vitro biocompatibility of brushite cement modified by polyethylene glycol

44

Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel

45

Mechanical property and microstructural changes during friction stir processing of cast aluminum 2285 alloy

46

Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Steel Original Research Article

47

Mechanical property and microstructure evolutions of Cf/SiOC composites with increasing annealing temperature in reduced pressure environment

48

Mechanical property and microstructure of aluminum alloy-steel tubes joint by magnetic pulse welding

49

Mechanical property and R-curve behavior of the B4C/BN ceramics composites

50

Mechanical property change and swelling behavior of SiC fiber after light-ion irradiation

51

Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters

52

Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters

53

Mechanical property characterization of electrospun recombinant human tropoelastin for vascular graft biomaterials

54

Mechanical property characterization of film-fabric laminate for stratospheric airship envelope

55

Mechanical property characterization of resin cement after aqueous aging with and without cyclic loading

56

Mechanical property degradation of a CuZr-based bulk metallic glass composite induced by sub-Tg annealing

57

Mechanical property degradation of a Nicalon fiber reinforced SiNC ceramic matrix composite under thermal shock loading

58

Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation

59

Mechanical property distribution of CFRP filament wound composites

60

Mechanical property distribution of CFRP filament wound composites

61

Mechanical property enhancement of kinetic sprayed Al coatings reinforced by multi-walled carbon nanotubes Original Research Article

62

Mechanical property evaluation of cathodic arc plasma-deposited CrN thin films on Fe–Mn–Al–C alloys

63

Mechanical property evaluation of natural fiber coir composite

64

Mechanical property evaluation of pressable restorative ceramics

65

Mechanical property evaluation of PZT/Al2O3 composites prepared by a simple solid-state mixed oxide method

66

Mechanical property extraction through conical indentation of a closed-cell aluminum foam Original Research Article

67

Mechanical Property Measurement at the Micro/Nano-scale1

68

Mechanical property measurement of titanium/titanium nitride and aluminium–magnesium/magnesium freestanding multilayer foils

69

Mechanical property measurements of heterogeneous materials by selective nanoindentation: Application to LiMn2O4 cathode

70

Mechanical property measurements of nanoscale structures using an atomic force microscope

71

Mechanical property measurements of nanoscale structures using an atomic force microscope

72

Mechanical property measurements of nanoscale structures using an atomic force microscope

73

Mechanical property of beam-to-column moment connection with hysteretic dampers for column weak axis

74

Mechanical property of Fe-base metallic glass coating formed by gas tunnel type plasma spraying

75

Mechanical property of high density nanocrystalline gold prepared by gas deposition method

76

Mechanical property of induction brazing TiAl-based intermetallics to steel 35CrMo using AgCuTi filler metal

77

Mechanical property of lattice truss material in sandwich panel including strut flexural deformation

78

Mechanical property of the low dielectric carbon doped silicon oxide thin film grown from MTMS/O2 source

79

Mechanical Property Prediction of Strip Model Based on PSO-BP Neural Network Original Research Article

80

Mechanical property variations within thermal barrier coatings

81

Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg–Li–(Al)–(RE) alloys for future cardiovascular stent application

82

Mechanical prosthetic aortic valve dehiscence presenting as sudden cardiac death due to extrinsic compression of the left main coronary artery

83

Mechanical Prosthetic Valves and Pregnancy

84

Mechanical protection of cardiac microcirculation during percutaneous coronary intervention of saphenous vein grafts

85

Mechanical pumping of portal blood to the liver: hemodynamic effects of a new experimental treatment for portal hypertension

86

Mechanical quadrature methods and their extrapolation for solving first kind Abel integral equations

87

Mechanical quadrature methods and their extrapolations for solving boundary integral equations of the conductivity problem with discontinuous media

88

Mechanical quadrature methods and their splitting extrapolations for boundary integral equations of first kind on open arcs

89

Mechanical quadrature methods and their splitting extrapolations for solving boundary integral equations of axisymmetric Laplace mixed boundary value problems

90

Mechanical quality of bedrock with increasing ductile deformation

91

Mechanical realization of a multichannel Martin-Puplett interferometer for perpendicular and oblique ECE measurements on JET

92

Mechanical reasoning about families of UTP theories

93

Mechanical reasoning by mental simulation

94

MECHANICAL REASONS FOR PLASTICITY-INDUCED CRACK CLOSURE UNDER PLANE STRAIN CONDITIONS

95

Mechanical recanalization of total coronary occlusions with the use of a new guide wire, ,

96

Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete

97

Mechanical redesign of the rotating biological contactor

98

Mechanical Refrigeration and the Integration of Perishable Commodity Markets

99

Mechanical Regulation of Cartilage Biosynthetic Behavior: Physical Stimuli

100

Mechanical regulation of PTHrP expression in entheses

101

Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites

102

Mechanical reinforcement in model elastomer nanocomposites with tuned microstructure and interactions

103

Mechanical reinforcement in natural rubber/organoclay nanocomposites

104

Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes Original Research Article

105

Mechanical reinforcement of chitosan using unzipped multiwalled carbon nanotube oxides

106

Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers

107

Mechanical relation for porous metal foams under complex loads of triaxial tension and compression

108

Mechanical relation of foamed metals under uniaxial and biaxial loads of collective tension and compression

109

Mechanical relations for porous metal foams under several typical loads of shearing, torsion and bending

110

Mechanical relaxation in a ternary silver borate below the glass transition temperature and corresponding features of the electrical response

111

Mechanical relaxation in glasses

112

Mechanical relaxation in glasses

113

Mechanical relaxation in simple molecular liquids from the liquid to the supercooled state

114

Mechanical relaxation in simple molecular liquids from the liquid to the supercooled state

115

Mechanical relaxation in thermoelectric oxide Ca3−xSrxCo4O9+δ (x=0, 0.25, 0.5, 1.0) associated with oxygen vacancies

116

Mechanical relaxation near glass transition studied by various methods

117

Mechanical relaxation of localized residual stresses associated with foreign object damage

118

Mechanical relaxation times as indicators of stickiness in skim milk–maltodextrin solids systems Original Research Article

119

Mechanical relaxations in single and mixed alkali silicate glasses

120

Mechanical reliability and durability of SOFC stacks. Part I : Modelling of the effect of operating conditions and design alternatives on the reliability

121

Mechanical reliability and durability of SOFC stacks. Part II: Modelling of mechanical failures during ageing and cycling

122

Mechanical reliability characterization of low carbon steel brazed joints with copper filler metal

123

Mechanical reliability evaluation of silicon nitride ceramic components after exposure in industrial gas turbines

124

Mechanical Reliability of the Jarvik 2000 Heart

125

Mechanical reliability of transparent conducting IZTO film electrodes for flexible panel displays

126

Mechanical Removal of Sulphuretted Apricot Pit

127

Mechanical reperfusion: treat well, treat on time too

128

Mechanical Rescue of the Heart in Shock

129

Mechanical resilience of skin: A function for blood supply and lymphatic drainage

130

Mechanical Resistance of Steel Fiber Reinforced Concrete to Axial Load

131

Mechanical resistance of wheat straw after incubation in cultures of ruminal cellulolytic microorganisms

132

Mechanical resistance properties of FRP/polyol–isocyanate foam sandwich panels

133

Mechanical response and effects of β-to-α" phase transformation on the strengthening of Ti–10 V–2 Fe–3 Al during one-dimensional shock loading

134

Mechanical response and fatigue analysis of the first wall structure of the PROMETHEUS IFE reactor

135

Mechanical response and modeling of fully compacted nanocrystalline iron and copper

136

Mechanical response and multilevel structure of biomimetic hydroxyapatite/polygalacturonic/chitosan nanocomposites

137

Mechanical response and shrinkage performance of cementitious composites with a new fiber hybridization

138

Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures

139

Mechanical response of 2024-7075 aluminium alloys joined by Friction Stir Welding

140

Mechanical response of 9% Cr heat-resistant martensitic steels to abrupt stress loading at high temperature

141

Mechanical response of a capacitive microsensor under thermal load

142

Mechanical response of a medium-fine-grained decomposed granite in Hong Kong

143

Mechanical Response of a Piezoelectrically Sandwiched Nano-beam Based on the Nonlocal Theory

144

Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling

145

Mechanical response of a simple molecular glass former in the glass transition region

146

Mechanical response of a tensegrity structure close to its integrity limit submitted to external constraints

147

Mechanical response of a unidirectional graphite fiber/polyimide composite as a function of temperature

148

Mechanical response of a woven graphite/polyimide composite to in-plane shear dominated loads at room and elevated temperatures Original Research Article

149

Mechanical response of amorphous and semicrystalline poly(ethylene terephthalate) and modelling in frame of quasi point defect theory

150

Mechanical response of amorphous ZrCuTi/PdCuSi nanolaminates under nanoindentation

151

Mechanical response of an oxide glass to mechanical loading—shear and volume relaxation effects: physical analysis Original Research Article

152

Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature

153

Mechanical response of barium-titanate/polymer 0–3 ferroelectric nano-composite film under uniaxial tension

154

Mechanical response of brain tissue under blast loading

155

Mechanical response of cracked laminated plates Original Research Article

156

Mechanical response of dibenzyl-based polyurethanes with diol chain extension

157

Mechanical response of discontinuous ceramic fiber reinforced metal matrix composites under quasi-static and dynamic loadings

158

Mechanical response of electrically conductive laminated composite plates in the presence of an electromagnetic field

159

Mechanical response of fiber-reinforced incompressible non-linearly elastic solids

160

Mechanical response of friction stir welded AA2024: experiment and modeling

161

Mechanical response of friction stir welded AA2024: experiment and modeling

162

Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle

163

Mechanical response of hard bio-based PU foams under cyclic quasi-static compressive loading conditions

164

Mechanical response of hydrogen-filled single-walled carbon nanotubes under torsion

165

Mechanical Response of Lined and Unlined Heated Drifts

166

Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading

167

Mechanical response of multicrystalline thin films in mesoscale field dislocation mechanics

168

Mechanical response of nanocrystalline steel obtained by mechanical attrition

169

Mechanical response of nanoporous gold Original Research Article

170

Mechanical response of neo-Hookean fiber reinforced incompressible nonlinearly elastic solids

171

Mechanical response of novel SiOC glasses to high temperature exposition

172

Mechanical response of oxide dispersion strengthened (ODS) EUROFER97 after neutron irradiation at 300 °C

173

Mechanical response of oxidized Zircaloy-4 cladding material submitted to a ring compression test

174

Mechanical response of pig skin under dynamic tensile loading

175

Mechanical response of polypropylene under multiple-step loading

176

Mechanical response of sediments to bubble growth

177

Mechanical response of tendon subsequent to ramp loading to varying strain limits

178

Mechanical response of the ITER toroidal field magnet system during fault conditions

179

Mechanical response of wall-patterned GaAs surface

180

Mechanical response of wall-patterned GaAs surface Original Research Article

181

Mechanical response of wooden boards subjected to humidity step variations: climatic chamber measurements and fitted mathematical models

182

Mechanical response of zirconium—I. Derivation of a polycrystal constitutive law and finite element analysis Original Research Article

183

Mechanical response of zirconium—II. Experimental and finite element analysis of bent beams Original Research Article

184

Mechanical response of Zr-based metallic glass

185

Mechanical responses evoked by nerve stimulation in gastric muscles of mouse lacking inositol trisphosphate receptor

186

Mechanical responses of a compliant electrospun poly(l-lactide-co-ε-caprolactone) small-diameter vascular graft

187

Mechanical responses of a polymer graphene-sheet nano-sandwich

188

Mechanical responses of Mg-based bulk metallic glasses

189

Mechanical responses of Zn1−xMnxO epitaxial thin films

190

Mechanical restrictions on biological responses by adherent cells within collagen gels

191

Mechanical resuspension of autochthonous calcite (Seekreide) failed to control internal phosphorus cycle in a eutrophic lake

192

Mechanical Right Ventricular Dyssynchrony in Patients After Atrial Switch Operation for Transposition of the Great Arteries

193

Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer

194

Mechanical self-stabilization, a working hypothesis for the study of the evolution of body proportions in terrestrial mammals?

195

Mechanical Sensitivity Enhancement of an Area-Changed Capacitive Accelerometer by Optimization of the Device Geometry

196

Mechanical Sensorless Control of PMSM With Online Estimation of Stator Resistance

197

Mechanical Sensorless Drives of IPMSM With Online Parameter Identification

198

Mechanical servo press technology for metal forming

199

Mechanical signals modulated vascular endothelial growth factor-A (VEGF-A) alternative splicing in osteoblastic cells through actin polymerisation

200

Mechanical simulation of a Proton Exchange Membrane Fuel Cell stack using representative elementary volumes of stamped metallic bipolar plates

201

Mechanical simulation of muscle loading on the proximal femur: analysis of cemented femoral component migration with and without muscle loading

202

Mechanical sludge disintegration for the production of carbon source for biological nutrient removal

203

Mechanical solid-state formation of Y1−xCexAlO3 and its application as an X-ray scintillator

204

Mechanical solid-state formation of Y1−xCexAlO3 and its application as an X-ray scintillator

205

Mechanical solutions for drawing processes under plane strain conditions by the upper bound method

206

Mechanical Sound by Karin Bijsterveld

207

Mechanical sowing of safflower on broad bed furrow

208

Mechanical spectra and calorimetric evaluation of gelatin–xanthan gum systems with high levels of co-solutes in the glassy state

209

Mechanical spectroscopy and structural evolution of CuMo thin films

210

Mechanical spectroscopy connected to creep and stress relaxation in a high resistant silicon nitride

211

Mechanical spectroscopy in carbon nanotube reinforced ABS

212

Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

213

Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

214

Mechanical spectroscopy measurements on SMA high-damping composites

215

Mechanical spectroscopy methods for the quantitative analysis of intergranular glass viscosity in polycrystalline ceramics

216

Mechanical spectroscopy of 18-carat AuCuPd white gold alloys

217

Mechanical spectroscopy of Al–Cu–Fe quasicrystalline coatings

218

Mechanical spectroscopy of Al–Cu–Fe quasicrystalline coatings

219

Mechanical spectroscopy of bovine compact bone

220

Mechanical spectroscopy of bovine compact bone

221

Mechanical spectroscopy of creep appearance in fine-grained yttria-stabilized zirconia

222

Mechanical spectroscopy of deformed WE43 magnesium alloys

223

Mechanical spectroscopy of hydrogen-absorbing quasicrystals

224

Mechanical spectroscopy of hydrogen-absorbing quasicrystals

225

Mechanical spectroscopy of i-Al–Pd–Mn and d-Al–Ni–Co

226

Mechanical spectroscopy of i-Al–Pd–Mn and d-Al–Ni–Co

227

Mechanical spectroscopy of interface stress relaxation in metal–matrix composites

228

Mechanical spectroscopy of magnetite filled polyurethane shape memory polymers

229

Mechanical spectroscopy of Mg reinforced with Al2O3 short fibers and C nanotubes

230

Mechanical spectroscopy of Mg reinforced with Al2O3 short fibers and C nanotubes

231

Mechanical spectroscopy of Mn–Zn ferrite

232

Mechanical spectroscopy of nanoparticle reinforced, electrodeposited ultrafine grained nickel Original Research Article

233

Mechanical spectroscopy of ordered ferromagnetic Fe3Al intermetallic compounds

234

Mechanical spectroscopy of ordered ferromagnetic Fe3Al intermetallic compounds

235

Mechanical spectroscopy of polymer-magnetite composites

236

Mechanical spectroscopy of polymer-magnetite composites

237

Mechanical spectroscopy of quasicrystals*1

238

Mechanical spectroscopy of the high-temperature brittle-to-ductile transition in ceramics and cermets

239

Mechanical spectroscopy of the Zener relaxation in Fe–22Al and Fe–26Al alloys

240

Mechanical spectroscopy of thermal stress relaxation at metal–ceramic interfaces in Aluminium-based composites Original Research Article

241

Mechanical spectroscopy of thin layers of PPV polymer on Si substrates

242

Mechanical spectroscopy of thin layers of PPV polymer on Si substrates

243

Mechanical spectroscopy of thin polystyrene films

244

Mechanical spectroscopy of vibrated granular matter

245

Mechanical spectroscopy study of thermo-mechanically treated 51CrV4 steel

246

Mechanical spectroscopy, internal friction and ultrasonic attenuation: Collection of works

247

Mechanical stabilisation of martensite due to cold deformation

248

Mechanical stabilisation of martensite due to cold deformation

249

Mechanical stabilisation of retained austenite in δ-TRIP steel

250

Mechanical stabilities of K4 carbon and K4-like NaC2 Original Research Article

251

Mechanical stability and electrical conductivity of Cu–Ag filamentary microcomposites

252

Mechanical stability and electrical conductivity of Cu–Ag filamentary microcomposites

253

Mechanical stability and transport properties of the Sn-promoted SrCo0.8Fe0.2O3−δ ceramic membrane

254

Mechanical stability of adhesives under water storage

255

Mechanical stability of BaTiO3-based PTC thermistor components: experimental investigation and theoretical modelling

256

Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region

257

Mechanical stability of high-speed planetary gears

258

Mechanical stability of high-speed planetary gears

259

Mechanical Stability of Immobilized Biocatalysts (CLECs) in Dilute Agitated Suspensions

260

Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading

261

Mechanical Stability Of Mt. Vesuvius Volcano: Effects Of Asymmetries On The Stress Field

262

Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures

263

Mechanical stability of resin–dentin bond components

264

Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process

265

Mechanical stability of structured bone grafts from the anterior iliac crest

266

Mechanical stability of the in vivo lumbar spine: implications for injury and chronic low back pain

267

Mechanical stability under sliding contact of thin silver film embedded in brittle multilayer

268

Mechanical Stabilization of Cemented Soil-Fly Ash Mixtures with Recycled Plastic Strips

269

Mechanical State Analysis of Load-Bearing Systems. Part 1. The Ultimate State

270

Mechanical State Analysis of Load-Bearing Systems. Part 2. The Damage State

271

Mechanical stiffness of thermally sprayed coatings and elastic constants for stress evaluation by X-ray diffraction

272

Mechanical stiffness of thermally sprayed coatings and elastic constants for stress evaluation by X-ray diffraction

273

Mechanical stimulation and mitogen-activated protein kinase signaling independently regulate osteogenic differentiation and mineralization by calcifying vascular cell

274

Mechanical stimulation by intermittent hydrostatic compression promotes bone-specific gene expression in vitro

275

Mechanical stimulation effects on functional end effectors in osteoblastic MG-63 cells

276

Mechanical stimulation increases proliferation, differentiation and protein expression in culture: Stimulation effects are substrate dependent

277

Mechanical stimulation of gingiva reduces plasma 8-OHdG level in rat periodontitis

278

Mechanical stimulation of individual stereocilia of living cochlear hair cells by atomic force microscopy

279

Mechanical stimulation of individual stereocilia of living cochlear hair cells by atomic force microscopy

280

Mechanical stimulation of rat tail vertebrae induces indomethacin-sensitive expression of insulin-like growth factor-1 mRNA in osteocytes

281

Mechanical stimuli enhances the expression of RGD-CAP/βig-h3 in the periodontal ligament

282

Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties

283

Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties

284

Mechanical strain activates estrogen response elements in bone cells

285

Mechanical strain and fluid movement both activate extracellular regulated kinase (ERK) in osteoblast-like cells but via different signaling pathways

286

Mechanical strain characteristics of cold worked Fe72Al28 and Fe75Ni25 alloys: A positron annihilation coincidence Doppler broadening view

287

Mechanical strain enhances no production and upregulates nNOS mRNA levels

288

Mechanical strain increases gene transfer to skeletal muscle cells

289

MECHANICAL STRAIN MODULATES MONOCYTE CHEMOTACTIC PROTEIN-1 AND IL-1BETA EXPRESSION BY CULTURED HUMAN AORTIC SMOOTH MUSCLE CELLS

290

Mechanical strain promotes angiotensin II-induced matrix metallo-proteinase-2 activity in human vascular smooth muscle cells

291

Mechanical strain sensitizes human vascular smooth muscle cells to angiotensin II

292

Mechanical strain stimulates a mitogenic response in coronary vascular smooth muscle cells via release of basic fibroblast growth factor

293

Mechanical strain, induced noninvasively in the high-frequency domain, is anabolic to cancellous bone, but not cortical bone

294

Mechanical stratigraphy and fault–fold interaction, Absaroka thrust sheet, Salt River Range, Wyoming

295

Mechanical stratigraphy and the transition from trishear to kink-band fault-propagation fold forms above blind basement thrust faults: A discrete-element study

296

Mechanical stratigraphy as a factor controlling the development of a sandbox transfer zone: a three-dimensional analysis

297

Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates

298

Mechanical Strength and Durability Properties of High Performance Mortar Containing Densified Silica Fume

299

Mechanical strength and electrical conductivity of Ni-YSZ cermets fabricated by viscous processing

300

Mechanical strength and failure characteristics of cast Mg–9%Al–1%Zn alloys produced by a heated-mold continuous casting process: Fatigue properties

301

Mechanical strength and hydrophobicity of cotton fabric after image plasma treatment

302

Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes

303

Mechanical strength and microstructure evolution of fly ash cement mortar submerged in pig slurry

304

Mechanical strength and rewetting stability of nickel laterite pellets

305

Mechanical strength and setting times estimation of hydroxyapatite cement by using neural network

306

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

307

Mechanical strength characteristics of asymmetric tilt grain boundaries in graphene

308

Mechanical strength evaluation for Nd-YAG laser and electric resistance spot weld (ERSW) joint under multiaxial loading

309

Mechanical strength improvement of a soda-lime–silica glass by thermal treatment under flowing gas

310

Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy

311

Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy

312

Mechanical strength of abalone nacre: Role of the soft organic layer

313

Mechanical strength of an ITER coil insulation system under static and dynamic load after reactor irradiation

314

Mechanical strength of bone allografts subjected to chemical sterilization and other terminal processing methods

315

Mechanical strength of calcium phosphate cement in vivo and in vitro

316

Mechanical strength of GeSi solid solution

317

Mechanical strength of GeSi solid solution

318

Mechanical strength of latissimus dorsi tendon transfer with Teflon felt augmentation

319

Mechanical strength of mediopatellar plica – The influence of its fiber content

320

Mechanical strength of nanosized hexagonal silica honeycombs

321

Mechanical strength of neutron-irradiated window materials

322

Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC

323

Mechanical strength of the binary compound Ni3Al

324

Mechanical strength of the binary compound Ni3Al

325

Mechanical strength of the cement–bone interface is greater in shear than in tension

326

Mechanical strength of the proximal femur as predicted from geometric and densitometric bone properties at the lower limb versus the distal radius

327

Mechanical strength of the thoracolumbar spine in the elderly: prediction from in situ dual-energy X-ray absorptiometry, quantitative computed tomography (QCT), upper and lower limb peripheral QCT, and quantitative ultrasound

328

Mechanical Strength of the Titin Z1Z2-Telethonin Complex

329

Mechanical strength of the transition zone at the boundary between opal-A and opal-CT zones in siliceous rocks

330

Mechanical Strength of Trass as Supplementary Cementing Material

331

Mechanical strength of various cyanate ester/epoxy insulation systems after fast neutron irradiation to the ITER design fluence and beyond

332

Mechanical strength, and oxygen and electronic transport properties of SrCo0.4Fe0.6O3−δ-YSZ membranes

333

Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement

334

Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder

335

Mechanical Stress Acts via Katanin to Amplify Differences in Growth Rate between Adjacent Cells in Arabidopsis

336

Mechanical stress and electric potential in cymbal piezoceramics by FEA

337

Mechanical stress control in a VLSI-fabrication process: a method for obtaining the relation between stress levels and stress-induced failures

338

Mechanical stress during phonation in a self-oscillating finite-element vocal fold model

339

Mechanical stress effect on oxygen ion mobility in 8 mol% yttria-stabilized zirconia electrolyte

340

Mechanical stress eliminates the effects of plasma from patients with preeclampsia on endothelial cells, , ,

341

Mechanical stress enhances production of cytokines in human periodontal ligament cells induced by Porphyromonas gingivalis

342

Mechanical stress in ALD-Al2O3 films

343

Mechanical stress in coevaporated b-FeSi thin films on silicon 2qÍ substrates

344

Mechanical stress induced activity and phase composition changes in sulfated zirconia catalysts

345

Mechanical Stress Induced Mechanism of Microtubule Catastrophes

346

Mechanical Stress Induced Mechanism of Microtubule Catastrophes Original Research Article

347

Mechanical stress induces COX-2 mRNA expression in bone cells from elderly women

348

Mechanical stress promotes the expression of smooth muscle-like properties in marrow stromal cells

349

Mechanical stress reduction in PECVD a-Si:H thin films

350

Mechanical stress reduction in PECVD a-Si:H thin films

351

Mechanical stress studies of amorphous GexSb40−xS60 film

352

Mechanical Stress: An Independent Determinant of Early Bioprosthetic Calcification in Humans

353

Mechanical stress-dependent secretion of interleukin 6 by endothelial cells after portal vein embolization: clinical and experimental studies

354

Mechanical Stresses in a Linear Plastic FGM Hollow and Solid Rotational Disk

355

Mechanical Stresses in a Linear Plastic FGM Hollow Cylinder Due to Non-Axisymmetric Loads

356

Mechanical stresses in carotid plaques using MRI-based fluid–structure interaction models

357

Mechanical stresses in fixed-speed wind turbines due to network disturbances

358

Mechanical stresses in silicon carbonitride films obtained by PECVD from hexamethyldisilazane

359

Mechanical stresses of a layer of colloidal particles aggregated by means of an electric field

360

Mechanical stretch in anterior cruciate ligament derived cells regulates type I collagen and decorin expression through extracellular signal-regulated kinase 1/2 pathway

361

Mechanical Stretch Induces Platelet-activating Factor Receptor Gene Expression Through the NF-κB Transcription Factor

362

Mechanical stretch is a down-regulatory signal for differentiation of C2C12 myogenic cells

363

Mechanical Stretch of Atrial Myocyte Monolayer Decreases Sarcoplasmic Reticulum Calcium Adenosine Triphosphatase Expression and Increases Susceptibility to Repolarization Alternans

364

Mechanical stretch promotes proliferation of rat bone marrow mesenchymal stem cells

365

Mechanical stretching of proteins: calmodulin and titin

366

Mechanical structure–property relationship of aerogels

367

Mechanical study of metallized polyethylene terephthalate (PET) films

368

Mechanical study of PLA–PCL fibers during in vitro degradation

369

Mechanical sub-cooling vapor compression systems: Current status and future directions

370

Mechanical support availability in pediatric cardiac surgery: Program size should not matter

371

Mechanical support for cardiac and respiratory failure in pediatric patients: Edited by Brian W. Duncan, MD, 2001, New York, New York, Marcel Dekker, Inc, 369 pp, illustrated, $165.00, ISBN: 0-8247-0275-1

372

Mechanical Support in Dilated Cardiomyopathy: Signs of Early Left Ventricular Recovery

373

Mechanical suppression of the dynamic foam head in bubble column reactors

374

Mechanical surface treatments effects on corrosion of AISI 316 Ti stainless steel in chloride environments

375

Mechanical surface treatments of electro-discharge machined (EDMed) ceramic composite for improved strength and reliability

376

Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)

377

Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance

378

Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance

379

Mechanical surface treatments on titanium, aluminum and magnesium alloys

380

Mechanical surface treatments on titanium, aluminum and magnesium alloys

381

Mechanical synthesis and characterization of Bi4Ti3O12 nanopowders

382

Mechanical synthesis and rapid consolidation of a nanocrystalline 5.33Fe0.37Cr0.16Al0.4Si0.07–Al2O3 composite by high-frequency induction heating

383

Mechanical synthesis and rapid consolidation of nanostructured FeAl–Al2O3 composites by high-frequency induction heated sintering

384

Mechanical synthesis in the iron oxide–metal system

385

Mechanical synthesis in the iron oxide–metal system

386

Mechanical synthesis of copper–carbon nanocomposites: Structural changes, strengthening and thermal stabilization

387

Mechanical synthesis of nanocrystalline α-Al2O3 seeds for enhanced transformation kinetics

388

Mechanical synthesis of nanostructured titanium–nickel alloys

389

Mechanical Synthesis of Zn-HKUST-1 Metal-Organic Framework and Investigation its Fluorescence Sensing Ability Toward to Detect Explosive-like Nitro aromatic Analytes Such as TNT

390

Mechanical system reliability analysis using a combination of graph theory and Boolean function

391

Mechanical system reliability analysis using a combination of graph theory and Boolean function

392

Mechanical systems in the quantum regime

393

Mechanical systems in the quantum regime

394

Mechanical systems related to the Schrödinger spectral problem

395

Mechanical tenderisation of beef muscles for use in re-formed joints made with a cold-set binder

396

Mechanical tenderization can alter fresh muscle characteristics of steaks from the beef round

397

Mechanical tensile promotion and superconducting properties of highly Pb-content HTc-BPSCCO superconductor

398

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

399

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

400

Mechanical tensile test of the full-size ITER TF conductor jacket materials at 4.2 K

401

Mechanical tension in the median nerve. The effects of joint positions

402

Mechanical tension stimulates the transdifferentiation of fibroblasts into myofibroblasts in human burn scars

403

Mechanical test on the ITER CC and Feeder jacket

404

Mechanical testing and modelling of a vertically aligned carbon nanotube composite structure

405

Mechanical testing and numerical modelling of pull-wound carbon-epoxy spinnaker poles

406

Mechanical testing and osteointegration of titanium implant with calcium phosphate bone cement and autograft alternatives

407

Mechanical Testing in Unsaturated Soils

408

Mechanical testing of a FW panel attachment system for ITER

409

Mechanical testing of cancellous bone from the femoral head: Experimental errors due to off-axis measurements

410

Mechanical testing of disks under gaseous pressure

411

Mechanical testing of electrospun PCL fibers

412

Mechanical testing of hip protectors

413

MECHANICAL TESTING OF POLYSIUCON THIN FILMS WITH THE ISDG

414

Mechanical testing of recombinant human bone morphogenetic protein-7 regenerated bone in sheep mandibles

415

Mechanical testing of shoulder prostheses and recommendations for glenoid design

416

Mechanical testing of steel/aluminium–silicon interfaces by pushout

417

Mechanical testing of the ITER vacuum vessel support structure – coating screening tests and high load multi-axial Mock Up tests

418

Mechanical testing of thermally stressed materials with rough interfaces: Mechanically induced delamination cracking in thermal barrier composites

419

Mechanical testing of titanium/aluminium–silicon interface: Effect of T6 heat treatment

420

Mechanical testing of titanium/aluminium–silicon interfaces by push-out

421

Mechanical testing via dominant shear deformation of small-sized specimen

422

Mechanical tests and finite element models for bone holding power of tibial locking screws

423

Mechanical tests of ATLAS Barrel Toroid tie rods Original Research Article

424

Mechanical Tests on Pervasively Jointed Rock Material: Insight into Rock Mass Behaviour

425

Mechanical tests on the welding part of SS316LN after heat treatment for Nb3Sn superconducting conductor

426

Mechanical tests on two batches of oxide dispersion strengthened RAFM steel (EUROFER97)

427

Mechanical thinning to make few-layer graphene from pencil lead

428

Mechanical Thrombectomy for Perioperative Acute Ischemic Stroke: Two Noncardiac and Non-neurosurgical Case Reports and a Literature Review

429

Mechanical Thrombectomy in Hemodialysis Access Shunts Using a 5F Pigtail Rotation Catheter In Vitro and In Vivo Investigations

430

Mechanical Tooth Depuration and Pocket Depth: A Correlative Clinical Study

431

Mechanical Transformation of Compounds Leading to Physical, Chemical, and Biological Changes in Pharmaceutical Substances

432

MECHANICAL TRANSMISSION AND SURVIVAL OF BACTERIAL WILT ON ENSET

433

Mechanical transmission of maize rayado fino marafivirus (MRFV) to maize and barley by means of the vascular puncture technique

434

Mechanical Transplanter for Agriculture Mechanization Education

435

MECHANICAL TRANSPORT AND TRANSMISSION OF CRYPTOSPORIDIUM PARVUM OOCYSTS BY WILD FILTH FLIES

436

Mechanical transport of metallogenic materials in endogenic hydrothermal solutions: evidence from the microspherules in micro-disseminated gold deposits, northwestern Sichuan, China

437

Mechanical treatment of artrial fibrillation: Removal of pericardial cyst by thoracoscopy

438

Mechanical treatment of fly ashes: Part IV. Strength development of ground fly ash-cement mortars cured at different temperatures

439

Mechanical twinning and texture evolution in severely deformed Ti–6Al–4V at high temperatures Original Research Article

440

Mechanical twinning in calcite considered with the concept of ferroelasticity

441

Mechanical twinning of jadeite - an indication of synseismic loading beneath the brittle-plastic transition

442

Mechanical twins in 304 stainless steel after small-charge explosions

443

Mechanical twins, their development and growth

444

Mechanical Unbinding of Aβ Peptides from Amyloid Fibrils

445

Mechanical Unfolding of a Titin Ig Domain: Structure of Transition State Revealed by Combining Atomic Force Microscopy, Protein Engineering and Molecular Dynamics Simulations

446

Mechanical Unfolding of a Titin Ig Domain: Structure of Unfolding Intermediate Revealed by Combining AFM, Molecular Dynamics Simulations, NMR and Protein Engineering

447

Mechanical unfolding of titin I27 domain: Nanoscale simulation of

448

Mechanical Unfolding of TNfn3: The Unfolding Pathway of a fnIII Domain Probed by Protein Engineering, AFM and MD Simulation

449

Mechanical Unfolding of Two DIS RNA Kissing Complexes from HIV-1

450

Mechanical Unfoldons as Building Blocks of Maltose-binding Protein

451

Mechanical unloading improves intracellular Ca2+ regulation in rats with doxorubicin-induced cardiomyopathy Original Research Article

452

Mechanical unloading of the heart activates the calpain system

453

Mechanical unloading of the rat heart involves marked changes in the protein kinase–phosphatase balance

454

Mechanical validation of a tomographic (pQCT) index for noninvasive estimation of rat femur bending strength

455

Mechanical Validation of the Three-Dimensional Intersection Geometry between the Puente Hills Blind-Thrust System and the Whittier Fault, Los Angeles, California

456

Mechanical validation of whole bone composite femur models

457

Mechanical validation of whole bone composite tibia models

458

Mechanical valve performance

459

Mechanical Valve Thrombosis With Dabigatran

460

Mechanical valves

461

Mechanical vapor compression desalination systems — A case study Original Research Article

462

Mechanical Ventilation and Air Leaks After Lung Biopsy for Acute Respiratory Distress Syndrome

463

Mechanical Ventilation and Anesthesia Strategies in Patients with Acute Respiratory Failure Due to Guillain-Barré Syndrome

464

Mechanical ventilation and multiple organ failure

465

Mechanical ventilation care in severe childhood neurological disorders

466

Mechanical Ventilation during Extracorporeal Membrane Oxygenation in Patients with Acute Severe Respiratory Failure

467

Mechanical ventilation in an obstetric population

468

Mechanical ventilation in an obstetric population: Characteristics and delivery rates

469

Mechanical Ventilation in Chest Trauma

470

MECHANICAL VENTILATION IN CHRONIC OBSTRUCTIVE PULMONARY DISEASE PATIENTS

471

Mechanical Ventilation Learns New Tricks

472

Mechanical ventilation may not be essential for initial cardiopulmonary resuscitation: Noe M, Weil MH, Tang W, et al Chest 108:821–827 September 1995

473

Mechanical ventilation strategy following Glenn and Fontan surgeries: On going challenge!

474

Mechanical ventilation with conventional volumes and pressures are not associated with increased air leaks or increased mortality

475

Mechanical ventilation: A review for the internist

476

Mechanical ventricular assistance in heart failure: pathology of the cardiac apex removed during device implantation

477

Mechanical ventricular assistance: An economical and effective means of treating end-stage heart disease

478

Mechanical verification of Lamport’s Bakery algorithm

479

Mechanical verification of soft-tissue attachment on bioactive glasses and titanium implants

480

Mechanical versus biological valve prosthesis: A ten-year comparison regarding function and quality of life

481

Mechanical vibration assisted plasma etching for etch rate and anisotropy improvement

482

Mechanical vibration model for chromosomes in metaphase of mitosis and possible application to the interruption of cell division

483

Mechanical vibration-assisted modulation of E. coli binding to poly-l-lysine coated biosensor surface

484

Mechanical vibration-induced particulate deposition and ionic mineralization at material boundaries in the fluid media

485

Mechanical viscoelastic behavior of dental adhesives

486

Mechanical vs. electrical failure mechanisms in high voltage, high energy density multilayer ceramic capacitors

487

Mechanical Vulnerability of L3-L4 Spinal Segment after Fusion Surgery Utilizing Dynamic Stress Analysis

488

Mechanical weeding of Rumex obtusifolius L. under different N, P and K availabilities in permanent grassland

489

Mechanical within-row weed control for transplanted crops using computer vision

490

Mechanical work and conversion degree in mechanically induced processes

491

Mechanical work and conversion degree in mechanically induced processes

492

Mechanical work and conversion degree in mechanically induced processes

493

Mechanical working of 2124 Al alloy—SiCp cast composites

494

Mechanical, acoustic and electrical properties of porous Ti-based metallic glassy/nanocrystalline composites

495

Mechanical, barrier and morphological properties of pea starch and peanut protein isolate blend films

496

Mechanical, biological and structural characterization of human atherosclerotic femoral plaque tissue

497

Mechanical, biological and structural characterization of in vitro ruptured human carotid plaque tissue

498

Mechanical, chemical and acoustic properties of new hybrid ceramic-polymer varnishes for musical instruments

499

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

500

Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes

501

Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers

502

Mechanical, Electrical, and Magnetic Properties of Ni Nanocontacts

503

Mechanical, electrical, piezoelectric and electro-active behavior of aligned multi-walled carbon nanotube/cellulose composites Original Research Article

504

Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel

505

Mechanical, electrochemical and tribological properties of nanocrystalline surface of brass produced by sandblasting and annealing

506

Mechanical, electronic and optical properties of antifluorites semiconductors X2C (X = Mg, Be)

507

Mechanical, electronic and thermodynamic properties of Mg2Ca Laves phase under high pressure: A first-principles calculation

508

Mechanical, fatigue and microstructural properties of friction stir welded 5083-H111 and 6082-T651 aluminum alloys

509

Mechanical, fracture-mechanical, hydric, thermal, and durability properties of lime–metakaolin plasters for renovation of historical buildings

510

Mechanical, material, and antimicrobial properties of acrylic bone cement impregnated with silver nanoparticles

511

Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion

512

Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks

513

Mechanical, microstructure and texture characterization of API X65 steel

514

Mechanical, moisture absorption, and biodegradation behaviours of bacterial cellulose fibre-reinforced starch biocomposites

515

Mechanical, morphological and dielectric properties of sintered mullite ceramics at two different heating rates prepared from alkaline monophasic salts

516

Mechanical, morphological and thermal properties of in situ ternary composites based on poly(ether imide), silicone rubber and liquid crystalline polymer

517

Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour bio-composites

518

Mechanical, Morphological Properties and Chemical Resistance of Filled Rattan Wastes Powder Epoxy Composites

519

Mechanical, photocatalytic and microbiological properties of titanium dioxide thin films synthesized with the sol–gel and low temperature plasma deposition techniques

520

Mechanical, physicochemical and color properties of chitosan based-films as a function of Aloe vera gel incorporation

521

Mechanical, pyrolysis, and combustion characterization of briquetted coal fines with municipal solid waste plastic (MSW) binders

522

Mechanical, Rheological and Computational Study of PVP/PANI with Additives

523

Mechanical, rheological, and swelling behavior of natural rubber/montmorillonite aerogels prepared by freeze-drying

524

Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles

525

Mechanical, sorption and adhesive properties of composites based on low density polyethylene filled with date palm wood powder

526

Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres Original Research Article

527

Mechanical, swelling, and thermal aging properties of marble sludge-natural rubber composites

528

Mechanical, thermal and ablative properties of interply continuous/spun hybrid carbon composites Original Research Article

529

Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites

530

Mechanical, thermal and laser damage threshold analyses of II group metal complexes of thiourea

531

Mechanical, thermal and morphological characterization of recycled LDPE/corn starch blends

532

Mechanical, Thermal and Morphological Properties of Recycled and Virgin PC/ wollastonite Composite and its Compatibilization by SBC

533

Mechanical, thermal and structural properties of rice starch films reinforced with rice starch nanocrystals

534

Mechanical, thermal and tribological characterization of a UHMWPE film reinforced with carbon nanotubes coated on steel

535

Mechanical, thermal, morphological and leaching properties of nonmetallic printed circuit board waste in recycled HDPE composites

536

Mechanical, Thermo-Physical and Ablation Properties of Nitrile Based Nanocomposite

537

Mechanical, thermophysical and fire properties of sansevieria fiber-reinforced polyester composites

538

Mechanical, tribological and erosion behaviour of super-elastic hard Ti–Si–C coatings prepared by PECVD

539

Mechanical, tribological, and electrochemical behavior of Cr1−xAlxN coatings deposited by r.f. reactive magnetron co-sputtering method

540

Mechanical, water vapor barrier and thermal properties of gelatin based edible films

541

Mechanical/physical characteristics of polymer mortar recycled from rapid-chilled steel slag

542

Mechanical/structural reliability evaluation through Esscherʹs method of approximation

543

Mechanical/thermal dewatering of lignite. Part 2: A rheological model for consolidation and creep process

544

Mechanical/thermal dewatering of lignite. Part 3: Physical properties and pore structure of MTE product coals

545

Mechanical/thermal dewatering of lignite. Part 4: Physico-chemical properties and pore structure during an acid treatment within the MTE process

546

Mechanical/Thermal Sources in a Micropolar Thermoelastic Medium Possessing Cubic Symmetry without Energy Dissipation

547

Mechanical-activation-assisted combustion synthesis of SiC powders with polytetrafluoroethylene as promoter

548

Mechanical-activation-assisted combustion synthesis of α-SiAlON in air

549

MECHANICALAND METALLURGICAL PROPERTIES OFWIDE-GAP ALUMINOTHERMIC RAILWELDS

550

Mechanical–biological waste treatment and the associated occupational hygiene in Finland

551

Mechanical-dry coating of wax onto copper powder by ball milling

552

Mechanical-dry coating of wax onto copper powder by ball milling

553

Mechanical-dry coating of wax onto copper powder by ball milling

554

Mechanical–electrochemical modeling of Li-ion battery designed for an electric scooter

555

Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder

556

Mechanically activated effect of friction stir processing in Al–Ti reaction

557

Mechanically Activated Enzymatic Hydrolysis of Pea Seeds and Its Effects on Bakery Products

558

Mechanically activated minerals as a sink for CO2

559

Mechanically activated PLZT ceramics: Structural and electrical properties

560

Mechanically activated Pt–Ni and Pt–Co alloys as electrocatalysts in the oxygen reduction reaction

561

Mechanically activated reactive extrusion synthesis (MARES) of NiTi

562

Mechanically activated reactive forging synthesis (MARFOS) of NiTi

563

Mechanically Activated Synthesis of Nanocrystalline Powders of Ferroelectric Bismuth Vanadate

564

Mechanically activated synthesis of nanocrystalline ternary carbide Fe3Mo3C

565

Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system

566

Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system

567

Mechanically activated transformations in the coordination sphere of platinum complexes induced by impact grinding of solid K2PtX6 (X=Cl, Br) and K2PtCl4 salts

568

Mechanically activating formation of layered structured bismuth titanate

569

Mechanically Activating Nucleation and Growth of Complex Perovskites

570

Mechanically active athermalization of a forward looking infrared system

571

Mechanically adjustable chemostats based on stimuli-responsive polymers

572

Mechanically alloyed Al–I composite materials Original Research Article

573

Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: Powder processing, consolidation and mechanical strength and hardness of the as-extruded materials

574

Mechanically alloyed and hot pressed Ni–49.7Ti alloy showing martensitic transformation

575

Mechanically alloyed and hot pressed Ni–49.7Ti alloy showing martensitic transformation

576

Mechanically alloyed Mg2Ni for metal-hydride–air secondary battery

577

Mechanically alloyed Mg–Ni–Ti and Mg–Fe–Ti powders as hydrogen storage materials

578

Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties

579

Mechanically alloyed multi-component Mo-based amorphous alloys with wide supercooled liquid region

580

Mechanically alloyed nanocomposites

581

Mechanically alloyed nanocrystalline iron and copper mixture: behavior and constitutive modeling over a wide range of strain rates

582

Mechanically alloyed tungsten carbide particle/Ti50Cu28Ni15Sn7 glassy alloy matrix composites

583

Mechanically alloyed Zr–Cu–Al–Ni–C glassy powders

584

Mechanically alloyed Zr–Cu–Al–Ni–C glassy powders

585

Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques

586

Mechanically aspirated radiation shields: A CFD and neural network design analysis

587

Mechanically assisted electroplating of Ni–P coatings on carbon steel

588

Mechanically based models: Adaptive refinement for B-spline finite element

589

Mechanically controlled domain structure in PZT piezoelectric ceramics

590

Mechanically controlled moisture removal from greenhouses

591

Mechanically coupled high dynamic linear motors – A new design approach and its control strategy

592

Mechanically coupled laminates with balanced plain weave

593

Mechanically Drawn Hydrogels Uniaxially Orient Hydroxyapatite Crystals and Cell Extension

594

Mechanically driven phase transformation in single phase Al62.5Cu25Fe12.5 quasi-crystals: Effect of milling intensity Original Research Article

595

Mechanically driven phase transition of fullerene Original Research Article

596

Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modes

597

Mechanically grooved, double sided, buried contact silicon solar cells

598

Mechanically immobilized nickel aquapentacyanoferrate modified electrode as an amperometric sensor for the determination of BHA

599

Mechanically improved and optically transparent polycarbonate/clay nanocomposites using phosphonium modified organoclay

600

Mechanically induced cation redistribution in magnesium ferrite and its thermal stability

601

Mechanically induced crystallization of polymers

602

Mechanically induced decrease of the Li conductivity in an alumosilicate glass

603

Mechanically induced electrical potentials of articular cartilage

604

Mechanically induced EPR signals in tooth enamel

605

Mechanically induced metatarsalgia

606

Mechanically induced oxidation of SrFeO3−δ

607

Mechanically induced phase combination in shape memory alloys by Chebyshev collocation methods

608

Mechanically induced phase transition in Fe4N during ball milling and shock compression of powders

609

Mechanically induced reaction for solid-state synthesis of Mg2Si and Mg2Sn

610

Mechanically induced reactivity of gibbsite: Part 1. Planetary milling

611

Mechanically induced reactivity of gibbsite: Part 2. Attrition milling

612

Mechanically induced self-propagating reaction and consequent consolidation for the production of fully dense nanocrystalline Ti55C45 bulk material

613

Mechanically induced self-propagating reactions: Analysis of reactive substrates and degradation of aromatic sulfonic pollutants

614

Mechanically induced structural modifications in metal-doped lamellar silica

615

Mechanically manufactured selective solar absorber surfaces

616

mechanically metallized Si3N4 and stainless steel

617

Mechanically milled AA6061/(Ti3Al)P MMC reinforced with intermetallics – the structure and properties

618

Mechanically milled alanates as hydrogen storage materials

619

Mechanically milled coal and magnesium composites for hydrogen storage Original Research Article

620

Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems

621

Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems

622

Mechanically polished copper surfaces modified with n-dodecanethiol and 3-perfluorooctyl-propanethiol

623

Mechanically produced Hazelnut Skin Micro and Nano Biosorbents for the Fast Removal of Lead Ions from Polluted Waters

624

Mechanically Produced Sub-Micro and Nano Powders of Mg and Mg/Carbon Composites as Anode Material of Primary and Secondary Mg-Air Batteries

625

Mechanically pulped sisal as reinforcement in cementitious matrices

626

Mechanically regulated expression of a neural glutamate transporter in bone: A role for excitatory amino acids as osteotropic agents?

627

Mechanically reinforced biodegradable nanocomposites. A facile synthesis based on PEGylated silica nanoparticles

628

Mechanically relevant consequences of the composite laminate-like design of the abdominal wall muscles and connective tissues

629

Mechanically robust and highly permeable AquaporinZ biomimetic membranes

630

Mechanically robust poly(3,4-ethylenedioxythiophene)–SiO2 hybrid conductive film prepared by simultaneous vapor phase polymerization

631

Mechanically robust thermally rearranged (TR) polymer membranes with spirobisindane for gas separation

632

MECHANICALLY SHORT CRACK GROWTH FROM NOTCHES IN A MILD STEEL

633

Mechanically simulated muscle forces strongly stabilize intact and injured upper cervical spine specimens

634

Mechanically stable and corrosion resistant superhydrophobic sol–gel coatings on copper substrate

635

Mechanically stable copolyimide for low level stress buffer

636

Mechanically stable implants of synthetic bone mineral by cold isostatic pressing

637

Mechanically stable porous cellulose media for affinity purification of family 9 cellulose-binding module-tagged fusion proteins

638

Mechanically Strain-Induced Modification of Selenium Powders in the Amorphization Process

639

Mechanically strong and thermosensitive macromolecular microsphere composite poly(N-isopropylacrylamide) hydrogels

640

Mechanically strong conducting hydrogels with special double-network structure

641

Mechanically strong double network photocrosslinked hydrogels from N,N-dimethylacrylamide and glycidyl methacrylated hyaluronan

642

Mechanically strong high performance layered polypyrrole nano fibre/graphene film for flexible solid state supercapacitor

643

Mechanically tissue-like elastomeric polymers and their potential as a vehicle to deliver functional cardiomyocytes

644

Mechanically tunable phononic band gaps in three-dimensional periodic elastomeric structures

645

Mechanically tunable phononic band gaps in three-dimensional periodic elastomeric structures

646

Mechanically-based approach to non-local elasticity: Variational principles

647

Mechanically–biologically treated municipal solid waste as a support medium for microbial methane oxidation to mitigate landfill greenhouse emissions

648

Mechanically-reinforced electrospun composite silk fibroin nanofibers containing hydroxyapatite nanoparticles

649

Mechanical-Property Changes of Polymeric and Composite Materials after Low-Temperature Proton Irradiation

650

Mechanical-property evaluation of thin corroded surface layers of ceramic materials by the microindentation technique

651

Mechanical-sensorless induction motor drive based only on dc-link measurements

652

Mechanical-sensorless permanent-magnet motor drive using relative phase information of harmonic currents caused by frequency-modulated three-phase PWM carriers

653

Mechanical-sensorless robust control of permanent-magnet synchronous motor using phase information of harmonic reactive power

654

MechanicalsimulationsofSANDIAIItestsOECDISP48benchmarkOriginalResearchArticle

655

Mechanical-stress relaxation in magnesium-based composites

656

Mechanical-stress relaxation in magnesium-based composites

657

Mechanical–thermal synthesis of Al–Ce/Al2O3 nanocomposite powders

658

Mechanico-chemical interaction of single-walled carbon nanotubes with different host matrices evidenced by SERS spectroscopy

659

Mechanics analysis of two-dimensionally prestrained elastomeric thin film for stretchable electronics

660

Mechanics and actuation properties of bucky gel-based electroactive polymers

661

Mechanics and chemical thermodynamics of phase transition in temperature-sensitive hydrogels

662

Mechanics and computational simulation of blood flow in microvessels

663

Mechanics and control of robots: Krishna C. Gupta; Springer, New York, Inc., 1997, ISBN: 0-387-94923-2

664

Mechanics and control of the flat versus normal foot during the stance phase of walking

665

Mechanics and cooling of pixel detectors

666

Mechanics and cooling of pixel detectors

667

Mechanics and cooling of pixel detectors

668

Mechanics and deformation of the nucleus in micropipette aspiration experiment

669

Mechanics and effective lengths of columns with positive and negative end restraints

670

Mechanics and energy analysis on molten pool spreading during laser solid forming

671

Mechanics and finite elements for the damped dynamic characteristics of curvilinear laminates and composite shell structures

672

Mechanics and fluid transport in a degradable discontinuity

673

Mechanics and Friction at the Nanometer Scale

674

Mechanics and kinematics of soft tissue under indentation are determined by the degree of initial collagen fiber alignment

675

MECHANICS AND MATERIAL ASPECTS IN PREDICTING SERVICEABILITY LIMITED BY STRESS-CORROSION CRACKING

676

Mechanics and mechanisms of fatigue damage and crack growth in advanced materials

677

Mechanics and mechanisms of magmatic underplating: inferences from mafic veins in deep crustal mylonite

678

Mechanics and mechanisms of magmatic underplating: inferences from mafic veins in deep crustal mylonite

679

Mechanics and physics of disclinations in solids

680

Mechanics and physics of quasibrittle fracture of polycrystalline metals under conditions of stress concentration Part 3. Toughness of metals and alloys

681

Mechanics and physics of quasibrittle fracture of polycrystalline metals under conditions of stress concentration. Part 2. Theoretical basis

682

Mechanics and physics of quasibrittle fracture of polycrystalline metals under the conditions of stress concentration. Part I. Experimental results

683

Mechanics and response of a surface rock block subjected to pressure fluctuations: A plucking model and its application

684

Mechanics and test study of flexible membranes ballooning in three dimensions

685

Mechanics and velocity of large landslides

686

Mechanics and velocity of the Lärchberg–Galgenwald landslide (Austria)

687

Mechanics modeling for deformation of nano-grained metals

688

Mechanics of 2D Elastic Stress Waves Propagation Impacted by Concentrated Point Source Disturbance in Composite Material Bars

689

Mechanics of 3-D shear cracks between Rayleigh and shear wave rupture speeds

690

Mechanics of a crushable pebble assembly using discrete element method

691

Mechanics of a Particle in a Riemannian Manifold

692

Mechanics of a rigid circular disc bonded to a cracked elastic half-space

693

Mechanics of a thin, tensioned shell, wrapped helically around a turn-bar

694

Mechanics of adhesive contact at the nanoscale: The effect of surface stress

695

Mechanics of adhesive contact on a power-law graded elastic half-space

696

Mechanics of adhesive joints as a plane problem of the theory of elasticity. Part I: general formulation

697

Mechanics of advancing pin-loaded contacts with friction

698

Mechanics of anisotropic hierarchical honeycombs

699

Mechanics of arterial subfailure with increasing loading rate

700

Mechanics of Avian Fibrous Periosteum: Tensile and Adhesion Properties During Growth

701

Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes

702

Mechanics of axisymmetric adhesive contact of rough surfaces involving power-law graded materials

703

Mechanics of axisymmetric wavy surface adhesion: JKR–DMT transition solution

704

Mechanics of BCC and FCC hollow-sphere foams

705

Mechanics of binary and polydisperse spherical pebble assembly

706

Mechanics of biomolecules

707

Mechanics of bond under repeated loading

708

Mechanics of bonds in an FRP bonded concrete beam

709

Mechanics of bone/PMMA composite structures: An in vitro study of human vertebrae

710

Mechanics of cable shovel-formation interactions in surface mining excavations

711

Mechanics of carbon nanoscrolls: a review

712

Mechanics of carbon nanotubes: applicability of the continuum-beam models

713

Mechanics of cellular and other low-density materials

714

Mechanics of change: A framework to reconfigure manufacturing systems

715

Mechanics of coal spirals

716

Mechanics of coiled nanotubes in uniaxial tension

717

Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues

718

Mechanics of composite materials in fuel cell systems

719

Mechanics of composites with two families of finitely extensible fibers undergoing large deformations

720

Mechanics of compressive stress evolution during thin film growth

721

Mechanics of concentric carbon nanotubes: Interaction force and suction energy

722

Mechanics of continuous equal-channel angular extrusion

723

Mechanics of coracoacromial ligament transfer augmentation for acromioclavicular joint injuries

724

Mechanics of corrugated surfaces

725

Mechanics of crawling cells

726

Mechanics of crystalline boron nanowires

727

Mechanics of damage initiation and growth in a TBC/superalloy system

728

MECHANICS OF DEEP-WATER PIPELINE LAYING

729

MECHANICS OF DEEP-WATER PIPELINE LAYING

730

Mechanics of deformation of single- and multi-wall carbon nanotubes

731

Mechanics of delamination of a brittle coating strip on a brittle substrate

732

Mechanics of Delaminations in Laminate Composite Structures

733

Mechanics of discontinuous ceramic tile core sandwich structure: Influence of thermal and interlaminar stresses

734

Mechanics of discrete contact

735

Mechanics of DNA Flexibility Visualized by Selective 2′-Amine Acylation at Nucleotide Bulges

736

Mechanics of dual-mode dilative failure in subaqueous sediment deposits

737

Mechanics of electrospun collagen and hydroxyapatite/collagen nanofibers

738

Mechanics of energy transfer and failure of ductile microscale beams subjected to dynamic loading

739

Mechanics of extended continua: modeling and simulation of elastic microstretch materials

740

Mechanics of fatigue crack growth in a bonding interface

741

Mechanics of fibre-reinforced cementitious composites

742

Mechanics of fish skin: A computational approach for bio-inspired flexible composites

743

Mechanics of forced unfolding of proteins

744

Mechanics of fracture and failure in geomaterials

745

Mechanics of fracture in single point incremental forming

746

Mechanics of granular materials: The discrete and the continuum descriptions juxtaposed

747

MECHANICS OF GROWTH OF INTERNAL FATIGUE CRACKS

748

MECHANICS OF GROWTH OF INTERNAL FATIGUE CRACKS

749

Mechanics of hexagonal atomic lattices

750

Mechanics of hierarchical materials

751

Mechanics of high displacement gradient faulting prior to lithification

752

Mechanics of highly deformed elastic shells

753

Mechanics of hollow concrete block masonry prisms under compression: Review and prospects

754

Mechanics of hollow sphere foams

755

Mechanics of hollow sphere foams

756

Mechanics of Immersed Particle Collisions

757

Mechanics of Immersed Particle Collisions

758

Mechanics of indentation for piezoelectric thin films on elastic substrate

759

Mechanics of interface failure in the trilayer elastic composite

760

Mechanics of interstitial-lymphatic fluid transport: theoretical foundation and experimental validation

761

Mechanics of Jointed and Faulted Rocks, edited by Hans-Peter Rossmanith (Balkema, Rotterdam, 1998, 658 p.)

762

Mechanics of landslide initiation as a shear fracture phenomenon

763

Mechanics of large strain extrusion machining and application to deformation processing of magnesium alloys Original Research Article

764

Mechanics of light weight proppants: A discrete approach

765

Mechanics of load transfer from matrix to fiber under flexural loading in a glass matrix composite using microfluorescence spectroscopy

766

Mechanics of longitudinal cracks in tooth enamel

767

Mechanics of machining of face-milling operation performed using a self-propelled round insert milling cutter

768

Mechanics of masonry in compression: Results from a homogenisation approach

769

Mechanics of materials, I saw and participated: a reminiscence

770

Mechanics of materials: M Vable; Oxford University Press; 2002; ISBN: 0-19-513337-4; 774 pp.; Price: £31.99

771

Mechanics of materials: top-down approaches to fracture Original Research Article

772

Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review

773

Mechanics of media motion in tumbling mills with 3d discrete element method

774

Mechanics of micro-milling with round edge tools

775

Mechanics of mixed-mode ductile material removal with a conical tool and the size dependence of the specific energy

776

Mechanics of molecular collagen is influenced by hydroxyapatite in natural bone

777

Mechanics of nanocrack: Fracture, dislocation emission, and amorphization

778

Mechanics of nanoscale wrinkling of graphene on a non-developable surface

779

Mechanics of neutrally bouyant cables

780

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

781

MECHANICS OF NUCLEATION AND GROWTH OF FATIGUE CRACKS

782

MECHANICS OF NUCLEATION AND GROWTH OF FATIGUE CRACKS

783

Mechanics of oblique spreading and ridge segmentation

784

Mechanics of Pb40/Sn60 near-eutectic solder alloys subjected to vibrations

785

Mechanics of physisorption on elastomer surface

786

Mechanics of plain-woven fabrics for inflated structures

787

Mechanics of plasma exposed spin-on-glass (SOG) and polydimethyl siloxane (PDMS) surfaces and their impact on bond strength

788

Mechanics of projectile penetration into non-cohesive soil targets

789

Mechanics of relaxing SiGe islands on a viscous glass

790

Mechanics of robust and releasable adhesion in biology: Bottom–up designed hierarchical structures of gecko

791

Mechanics of roll edge contact in cold rolling of thin strip

792

Mechanics of roll edge contact in cold rolling of thin strip

793

Mechanics of rubber shear springs

794

Mechanics of Saw-Tooth Chip Formation in Metal Cutting

795

Mechanics of Saw-Tooth Chip Formation in Metal Cutting

796

Mechanics of scars

797

Mechanics of shaft-loaded blister test for thin film suspended on compliant substrate

798

Mechanics of shear deformable thin-walled beams made of composite materials

799

Mechanics of sintering for coupled grain boundary and surface diffusion Original Research Article

800

Mechanics of small damage in fiber-reinforced composite materials

801

Mechanics of soft active materials with phase evolution

802

Mechanics of Solid Materials, R.J. Asaro, V.A. Lubarda. Cambridge University Press, Cambridge (2006), ISBN: 978-0-521-85979-0

803

Mechanics of stretchable electronics on balloon catheter under extreme deformation

804

Mechanics of stretchable electronics with high fill factors

805

MECHANICS OF STRINGED INSTRUMENTS

806

Mechanics of structures and materials: Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, A.A. Balkema, Rotterdam, 1995, xix+760pp.

807

Mechanics of superelasticity in Ti–30Nb–(8–10)Ta–5Zr alloy Original Research Article

808

Mechanics of Taylor impact testing of polycarbonate

809

Mechanics of tendon, from an engineering perspective

810

Mechanics of the ankle and subtalar joints revealed through a 3D quasi-static stress MRI technique

811

Mechanics of the anterior drawer test at the ankle: the effects of ligament viscoelasticity

812

Mechanics of the burnishing process

813

Mechanics of the Cell: Overcoming a Fear of Equations

814

Mechanics of the human red blood cell deformed by optical tweezers

815

Mechanics of the hysteretic large strain behavior of mussel byssus threads

816

Mechanics of the middle ear system: computerized measurements of its pressure–volume relationship

817

Mechanics of the pulmonary valve in the aortic position

818

Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates

819

Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants

820

Mechanics of the tapered interference fit in dental implants

821

Mechanics of the WTC collapse

822

Mechanics of thermophoretic and thermally induced edge forces in carbon nanotube nanodevices

823

Mechanics of thick-skinned Variscan overprinting of Cadomian basement (Iberian Variscides)

824

Mechanics of thin ultra-light stainless steel sandwich sheet material: Part I. Stiffness Original Research Article

825

Mechanics of thin ultra-light stainless steel sandwich sheet material: Part II. Resistance to delamination Original Research Article

826

Mechanics of thin-film transistors and solar cells on flexible substrates

827

Mechanics of thin-walled curved beams made of composite materials, allowing for shear deformability

828

Mechanics of three-dimensional braided structures for composite materials - part I: fabric structure and fibre volume fraction

829

Mechanics of three-dimensional braided structures for composite materials – part III: nonlinear finite element deformation analysis

830

Mechanics of three-dimensional braided structures for composite materials ¯ Part II: prediction of the elastic moduli

831

Mechanics of tidally driven fractures in Europaʹs ice shell

832

Mechanics of toe and heel landing in stepping down in ongoing gait

833

Mechanics of torque generation during quadrupedal arboreal locomotion

834

Mechanics of tungsten blistering: A finite element study

835

Mechanics of tunnelling cracks in trilayer elastic materials in tension

836

Mechanics of two-stage crack growth in fretting fatigue

837

Mechanics of ultra-stretchable self-similar serpentine interconnects

838

Mechanics of upward propagation of cover-collapse sinkholes

839

Mechanics of Variscan Orogeny: A modern view on orogenic research

840

Mechanics of vein, fault and solution surface formation in the Appalachian valley and ridge, northeastern tennessee, U.S.A.: implications for fault friction, state of stress and fluid pressure

841

Mechanics of ventricular torsion

842

Mechanics of very fine-grained nanocrystalline materials with contributions from grain interior, GB zone, and grain-boundary sliding

843

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH SOUND AND VIBRATION CONCEPTS, ARTICLE 3

844

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH SOUND AND VIBRATION CONCEPTS—PART 2

845

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH VIBRATIONS AND ACOUSTICS. ARTICLE 4: PSYCHOACOUSTICS AND SOUND QUALITY

846

Mechanics of viscous sintering on the micro- and macro-scale Original Research Article

847

Mechanics of wave reflections in a coronary bypass loop model: the possibility of partial flow cut-off

848

Mechanics of Web Panel Postbuckling Behavior in Shear

849

Mechanics on fractal bodies. Data compression using fractals

850

Mechanics prediction of the fracture pattern on scratching wafers of single crystal silicon Original Research Article

851

Mechanics Problems in Geodynamics. Part II, edited by R. Wang and K. Aki.T

852

Mechanics: The well-spring of mathematics (volume 2)

853

Mechanics-based model for non-affine swelling in perfluorosulfonic acid (PFSA) membranes

854

Mechanics-based scaling laws for the durability of thermal barrier coatings

855

Mechanim of topiramate-induced acute-onet myopia and angle cloure glaucoma

856

Mechanisation of short rotation forestry

857

Mechanised wire-wise verification of Handel-C synthesis

858

Mechanising a formal model of flash memory

859

Mechanising first-order temporal resolution

860

Mechanism about improvement of NiSi thermal stability for Ni/Pt/Si(1 1 1) bi-layered system

861

Mechanism Action of Platelets and Crucial Blood Coagulation Pathways in Hemostasis

862

Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates

863

Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles

864

Mechanism Analysis and Parameter Optimization of Mega-Sub-Isolation System

865

Mechanism analysis for supercritical ethanolysis of Huolinguole lignite

866

Mechanism Analysis Indicates that Recombination Events in HIV-1 Initiate and Complete Over Short Distances, Explaining Why Recombination Frequencies Are Similar in Different Sections of the Genome

867

Mechanism analysis of a trisector

868

Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment

869

Mechanism analysis of quasi-static dense pebble flow in pebble bed reactor using phenomenological approach

870

Mechanism and Activation Parameters of the Reactions of Arenes with VO+2 in Sulfuric Acid

871

Mechanism and active sites for the partial oxidation of methanol to formaldehyde over an electrolytic silver catalyst Original Research Article

872

Mechanism and Antiviral Therapy in Preventing Mother-to-Child Transmission During Pregnancy with Hepatitis B Virus Infection

873

Mechanism and application of solid phase adsorption toxin tracking for monitoring microcystins

874

Mechanism and applications of phosphite dehydrogenase

875

Mechanism and applications of Rieske non-heme iron dioxygenases

876

Mechanism and behavior of bitumen strength reinforcement using fibers

877

Mechanism and characterizations studies of resistive switching effects on a thin FeOx-transition layer of the Ti/TiN/SiO2/FeOx/FePt structure by thermal annealing treatments

878

Mechanism and cleavage specificity of the H-N-H endonuclease colicin E9

879

Mechanism and conditions of the chessboard structure formation Original Research Article

880

Mechanism and control of class-switch recombination

881

Mechanism and control of crack generation in glass substrates during crystallization of a-Si Films by flash lamp annealing

882

Mechanism and control of current transport in GaN and AlGaN Schottky barriers for chemical sensor applications

883

Mechanism and control of electrification in pneumatic conveying of powders

884

Mechanism and Control of Food Allergy

885

Mechanism and deactivation kinetics of S2-xanthione in acetonitrile, a quenching solvent, and of S2-exciplex measured by pico- and femtosecond laser spectroscopy

886

Mechanism and diastereoselectivity of the prebiotic synthesis of deoxyribonucleotide precursors C5-thiazoline: A DFT study

887

Mechanism and direct dynamics studies for the reaction of monoethylsilane EtSiH3 with atomic O (3P)

888

Mechanism and dynamics of shrinking island grains in mazed bicrystal thin films of Au Original Research Article

889

Mechanism and dynamics of the CH2OH+O2 reaction

890

Mechanism and effect of chemical weathering of sedimentary rocks

891

Mechanism and electronic transition in the reaction: On the fly dynamics simulations with multi-reference potentials

892

Mechanism and energetics of dissociative adsorption of SiH3 on the hydrogen-terminated Si(0 0 1)-(2×1) surface

893

Mechanism and Energy Landscape of Domain Swapping in the B1 Domain of Protein G

894

Mechanism and evolution of heat transfer in mushy zone during cold crucible directionally solidifying TiAl alloys

895

Mechanism and favourable operating conditions of organic substrate removal in Microaerophilic Upflow Sludge Bed Reactor (MUSB)

896

Mechanism and Functional Significance of Itk Autophosphorylation

897

Mechanism and gelling effects of linked polymer solution in the core

898

Mechanism and Government Initiatives Promoting Innovation and Commercialization of University Invention

899

Mechanism and Hydrophobic Forces Driving Membrane Protein Insertion of Subunit II of Cytochrome bo3 Oxidase

900

Mechanism and improvement of the visible light photocatalysis of organic pollutants over microcrystalline AgNbO3 prepared by a sol–gel method

901

Mechanism and influencing factors analysis of flowing instability of supercritical endothermic hydrocarbon fuel within a small-scale channel

902

Mechanism and kinetic control of the oxyprecipitation of sulphuric liquors from steel pickling

903

Mechanism and kinetic model for the decolorization of the azo dye Reactive Black 5 by hydrogen peroxide and UV radiation

904

Mechanism and kinetic properties for OH-initiated atmospheric degradation of the organophosphorus pesticide diazinon

905

Mechanism and kinetic studies for OH radical-initiated atmospheric oxidation of methyl propionate

906

Mechanism and kinetic study for the degradation of lindane by photo-Fenton process

907

Mechanism and kinetic study on the gas-phase reactions of OH radical with carbamate insecticide isoprocarb

908

Mechanism and kinetic study on the OH-initiated degradation of 2,3,7,8-tetrachlorinated dibenzofuran in atmosphere Original Research Article

909

Mechanism and kinetics for the reaction of O(3P) with DMSO: A theoretical study

910

Mechanism and kinetics of Al2O3 nanoparticles formation by reaction of bulk Al with H2O and CO2 at sub- and supercritical conditions

911

Mechanism and kinetics of apatite formation on nanocrystalline TiO2 coatings: A quartz crystal microbalance study

912

Mechanism and kinetics of carbide dissolution in near alpha Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy

913

Mechanism and kinetics of color center formation on epitaxial thin films of MgO

914

Mechanism and kinetics of Cr(VI) reduction by waste slag generated from iron making industry

915

Mechanism and kinetics of crystallization of amorphous Fe81B13Si4C2 alloy

916

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

917

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

918

Mechanism and kinetics of electrochemical degradation of isothiazolin-ones using Ti/SnO2–Sb/PbO2 anode Original Research Article

919

Mechanism and kinetics of free-radical degradation of xyloglucan in aqueous solution

920

Mechanism and kinetics of gypsum–anhydrite transformation in aqueous electrolyte solutions

921

Mechanism and kinetics of lithium vapor capture in a high-temperature packed bed of kaolinite

922

Mechanism and kinetics of mechanochemical processes in comminuting devices: 1. Theory

923

Mechanism and kinetics of mechanochemical processes in comminuting devices: 2. Applications of the theory. Experiment

924

Mechanism and kinetics of Na+ ion depletion under the anode during electro-thermal poling of a bioactive glass

925

Mechanism and Kinetics of Nonequilibrium and Multilayer Adsorption and Desorption of Gases on Solids

926

Mechanism and Kinetics of Oxidation of 2,4,6Trichlorophenol by Fentons Reagent

927

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy: Part I. The interplay of sorbent structure and fluid phase conditions

928

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy: Part II. Impact on chromatographic separations

929

Mechanism and kinetics of sodium release from brown coal char particles during combustion

930

Mechanism and Kinetics of the 2,2′-Bipyridyl Catalysis of the Chromium(VI) Oxidation of Malic Acid

931

Mechanism and Kinetics of the 2,2′-Bipyridyl Catalysis of the Chromium(VI) Oxidation of Malic Acid

932

Mechanism and kinetics of the electrochemical CO adlayer oxidation on Pt(111)

933

Mechanism and kinetics of the electrochemical formation of polypyrrole under forced convection conditions

934

Mechanism and kinetics of the free radical ring-opening polymerization of cyclic allylic sulfide lactones

935

Mechanism and kinetics of the NOCO reaction on Rh

936

Mechanism and kinetics of the reaction of 1,4-thioxane with O3 in the atmosphere – A theoretical study

937

Mechanism and kinetics of the selective NO reduction over Co-ZSM-5 studied by the SSITKA technique: 2. Reactivity of NOx-adsorbed species with methane

938

Mechanism and Kinetics of the Selective NO Reduction over Co-ZSM-5 Studied by the SSITKA Technique: Part 1: NOX Adsorbed Species Formation

939

Mechanism and kinetics of thermal decomposition of 5-benzylsulfanyl-2-amino-1,3,4-thiadiazole

940

Mechanism and kinetics of thermal decomposition of ammoniacal complex of copper oxalate

941

Mechanism and kinetics of thermal decomposition of biodiesel fuel

942

Mechanism and kinetics of thermal decomposition of carbonates

943

Mechanism and kinetics of thermal decomposition of zinc oxalate

944

Mechanism and kinetics of thin zirconium and hafnium oxide film growth in an ALD reactor

945

Mechanism and kinetics of transesterification in poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalene dicarboxylate) polymer blends

946

Mechanism and kinetics of wollastonite fibre dissolution in the aqueous solution of acetic acid

947

Mechanism and kinetics study on the OH-initiated oxidation of organophosphorus pesticide trichlorfon in atmosphere Original Research Article

948

Mechanism and life study on polyaniline anti-corrosion coating

949

Mechanism and Location of Atrial Flutter in Transplanted Hearts: Observations During Transient Entrainment From Distant Sites

950

Mechanism and main regularities of the alkaline pyrolysis of wood

951

Mechanism and management of treatment-related gonadal failure in recipients of high dose chemoradiotherapy

952

Mechanism and Mathematical Model of Heat and Mass Transfer During Convective Drying of Porous Materials

953

Mechanism and Mathematical Model of Heat and Mass Transfer During Convective Drying of Porous Materials

954

Mechanism and Mechanism-Based Inactivation of 4-Hydroxyphenylpyruvate Dioxygenase

955

Mechanism and microstructure of nickel-ceria composite coatings prepared by pulse current deposition under the ultrasonic field

956

Mechanism and mode of albitization of detrital feldspar in the Devonian Padeha Formation, Eastern Alborz, Iran

957

Mechanism and modeling of saw-tooth structure formation in the L12–L10 two-phase system Original Research Article

958

Mechanism and modeling of the formation of gaseous alkali sulfates

959

Mechanism and modelling of bamboo pyrolysis

960

Mechanism and molecular markers associated with rust resistance in a chickpea interspecific cross ( Cicer arietinum × Cicer reticulatum )

961

Mechanism and molecular weight model for thermal oxidation of linear ethylene–butene copolymer

962

Mechanism and NaOH effect of polymer-supported catalyst: phosphazene reaction

963

Mechanism and number of adducts of photo-addition of glycine methyl-ester to [60] fullerene

964

Mechanism and performance of a dry particle separator using an elastic drum

965

Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys

966

Mechanism and prediction analysis of sustained casing pressure in “A” annulus of CO2 injection well

967

Mechanism and prediction of bed agglomeration during fluidized bed combustion of a biomass fuel: Effect of the reactor scale

968

Mechanism and Prevention of Disintegration of AOD Stainless Steel Slag Original Research Article

969

Mechanism and product characterization from the electroreduction of heterodinuclear complexes [(C5Me5)ClM(μ-L)Re(CO)3X](PF6), M=Rh or Ir, L=2,2′-azobispyridine or 2,2′-azobis(5-chloropyrimidine), X=halide

970

Mechanism and rate of butyl phosphinate formation from reaction of phosphinic acid (Cyanex 272) and tributyl phosphate

971

Mechanism and rate of placental transfer of zalcitabine (2ʹ,3ʹ-dideoxycytidine) in Macaca nemestrina, , ,

972

Mechanism and relaxation kinetics of photo-induced valence tautomerism of [Co(phen)(3,5-DBSQ)2]·C6H5Cl

973

Mechanism and role of partitioning in removal of organics by RO and NF composite membranes Original Research Article

974

Mechanism and scope of salen bifunctional catalysts in asymmetric aldehyde and α-ketoester alkylation

975

Mechanism and selectivity of 2,3-dimethyl-2,3-diphenylbutane mediated addition of vinyltriethoxysilane to polyethylene

976

Mechanism and sequence of assembly and dispersal of supercontinents

977

Mechanism and Severity of Injury in Trauma Patients: A Three-Year Report of the Isfahan Trauma Registry

978

Mechanism and Severity of Mitral Regurgitation by Transesophageal Echocardiography in Patients Referred for Percutaneous Valve Repair

979

Mechanism and significance of mercury volatilization from contaminated floodplains of the German river Elbe

980

Mechanism and site requirements for NO oxidation on Pd catalysts

981

Mechanism and specificity of the terminal thioesterase domain from the erythromycin polyketide synthase Original Research Article

982

Mechanism and stoichiometry of 2,2-diphenyl-1-picrylhydrazyl radical scavenging by glutathione and its novel α-glutamyl derivative

983

Mechanism and structure–activity relationships of norspermidine-based peptidic inhibitors of trypanothione reductase Original Research Article

984

Mechanism and Substrate Recognition of Human Holo ACP Synthase Original Research Article

985

Mechanism and synthesis of pharmacologically active quinolones from Morita–Baylis–Hillman adducts

986

Mechanism and Thermodynamics of Guanidinium Chloride-induced Denaturation of ALS-associated Mutant Cu,Zn Superoxide Dismutases

987

Mechanism and timing of Pb transport from subducted oceanic crust and sediment to the mantle source of arc lavas

988

Mechanism based lumping of pyrolysis reactions: Lumping by reactive intermediates Original Research Article

989

Mechanism based protein crosslinking of domains from the 6-deoxyerythronolide B synthase

990

Mechanism based representation of the active site of 5α-reductase (5AR)

991

Mechanism behind the relation between shell structure and stability of heaviest nuclei Original Research Article

992

Mechanism by which a frictionally confined rod loses stability under initial velocity and position perturbations

993

Mechanism by which Alcohol and Wine Polyphenols Affect Coronary Heart Disease Risk

994

Mechanism by which avenanthramide-c, a polyphenol of oats, blocks cell cycle progression in vascular smooth muscle cells

995

Mechanism by which opening the mitochondrial ATP-sensitine potassium channel protects the ischemic heart

996

Mechanism by which quinapril improves vascular function in coronary artery disease

997

Mechanism by Which the Amyloid-like Fibrils of a β2-Microglobulin Fragment Are Induced by Fluorine-substituted Alcohols

998

Mechanism change in estimating of antioxidant activity of phenolic compounds

999

Mechanism Controlling Permeability Change in Clays due to Changes in Pore Fluid

1000

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

بازگشت