ليست عنوان مقالات لاتين Microstructural evolution in pure aluminum processed by high-pressure torsion Microstructure and electrochemical performances of La0.7Mg0.3Ni2.55−xCo0.45Mx (M = Cu, Cr, Al; x = 0–0.4) hydrogen storage alloys prepared by casting and rapid quenching

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructural evolution in pure aluminum processed by high-pressure torsion

2

Microstructural evolution in recrystallized and unrecrystallized Al–Mg–Sc alloys during superplastic deformation

3

Microstructural evolution in semi-solid AA7034

4

Microstructural evolution in silica aerogel

5

Microstructural evolution in sol–gel derived P2O5-doped cordierite powders

6

Microstructural evolution in spray-formed and melt-spun Al85Nd5Ni10 bulk hybrid composites

7

Microstructural evolution in T24, a modified 2(1/4)Cr–1Mo steel during creep after different heat treatments

8

Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper

9

Microstructural evolution in the partial transient liquid phase diffusion bonding of Zircaloy-4 to stainless steel 321 using active titanium filler metal

10

Microstructural evolution in the phase mixtures of Ti(C,N)–Mo at 1600°C

11

Microstructural evolution in the phase mixtures of Ti(C,N)–Mo at 1600°C

12

Microstructural evolution in the pseudoelastic cycling of Cu–Zn–Al single crystals: behavior at a transition stage

13

Microstructural evolution in the pseudoelastic cycling of Cu–Zn–Al single crystals: behavior at a transition stage

14

Microstructural evolution in thermally sprayed WC–Co coatings: comparison between nanocomposite and conventional starting powders Original Research Article

15

Microstructural evolution in tungsten and copper probes under hydrogen irradiation at ISTTOK

16

Microstructural evolution in twin roll cast AA3105 during homogenization

17

Microstructural evolution in twin-roll strip cast Mg–Zn–Mn–Al alloy

18

Microstructural evolution in two-phase solids: morphological stability of near-periodic particle arrangements

19

Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior

20

Microstructural evolution in zirconium based alloys

21

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

22

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

23

Microstructural evolution kinetics after plastic deformation of equiatomic Ti–Ni alloy during isothermal annealings

24

Microstructural evolution model of TA15 titanium alloy based on BP neural network method and application in isothermal deformation

25

Microstructural evolution of 304 stainless steel during mechanical milling

26

Microstructural evolution of 304 stainless steel during mechanical milling

27

Microstructural evolution of 7 wt.% Y2O3–ZrO2 thermal barrier coatings due to stress relaxation at elevated temperatures and the concomitant changes in thermal conductivity

28

Microstructural evolution of 7075 Al gas atomized powder and high-pressure cold sprayed deposition

29

Microstructural evolution of 9Cr–1Mo deposited metal subjected to weld heating

30

Microstructural evolution of a carbon modified single crystal Ni-base superalloy

31

Microstructural evolution of a commercial ultrafine alumina powder densified by different methods

32

Microstructural evolution of a delta containing nickel-base superalloy during heat treatment and isothermal forging

33

Microstructural evolution of a eutectic Al–Si engine subjected to severe running conditions

34

Microstructural evolution of a heavily cold-rolled CuCr in situ metal matrix composite

35

Microstructural evolution of a heavily cold-rolled CuCr in situ metal matrix composite

36

Microstructural evolution of a hot-rolled Ti–40Al–10Nb alloy

37

Microstructural evolution of a hot-rolled Ti–40Al–10Nb alloy

38

Microstructural evolution of a MCrAlY coating upon isothermal annealing

39

Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography Original Research Article

40

Microstructural evolution of a NiCoCrAlY coating on an IN100 substrate

41

Microstructural evolution of a Ti-4.5Al-3Mo-1V alloy during hot working

42

Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing

43

Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing

44

Microstructural evolution of a Ti–6Al–4V alloy during β-phase processing: experimental and simulative investigations

45

Microstructural evolution of a Ti–6Al–4V alloy during β-phase processing: experimental and simulative investigations

46

Microstructural evolution of A356.2 alloy prepared by the SIMA process

47

Microstructural evolution of aged heat-resistant cast steel following strain controlled fatigue

48

Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process

49

Microstructural evolution of Alloy 690 during sensitization at 700 °C

50

Microstructural evolution of Alloy 718 at high helium and hydrogen generation rates during irradiation with 600–800 MeV protons

51

Microstructural evolution of allylamine polymerized plasma films

52

Microstructural evolution of Al–Zn–Mg–Cu–(Sc) alloy during hot extrusion and heat treatments

53

Microstructural evolution of amorphous cobalt-rich magnetic alloys during magnetic field annealing

54

Microstructural evolution of amorphous cobalt-rich magnetic alloys during magnetic field annealing

55

Microstructural evolution of an Al67Mn8Ti24Nb1 alloy during mechanical milling and subsequent annealing process

56

Microstructural evolution of an Al67Mn8Ti24Nb1 alloy during mechanical milling and subsequent annealing process

57

Microstructural evolution of an ECAE-formed ZK60-RE magnesium alloy in the semi-solid state

58

Microstructural evolution of an incipient fault zone in Opalinus Clay: Insights from an optical and electron microscopic study of ion-beam polished samples from the Main Fault in the Mt-Terri Underground Research Laboratory

59

Microstructural evolution of ball-milled Mg–Ni powder during hydrogen sorption

60

Microstructural evolution of both as-irradiated and subsequently deformed microstructures of 316 L stainless steel irradiated at 30–160 °C at LANSCE

61

Microstructural evolution of buffers

62

Microstructural evolution of bulk nanocrystalline Ni during creep

63

Microstructural evolution of bulk polycrystalline La0.7−xLuxSr0.3MnO3 (x = 0.2, 0.45, 0.6) compounds

64

Microstructural evolution of CANDU spacer material Inconel X-750 under in situ ion irradiation

65

Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent aging Original Research Article

66

Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results

67

Microstructural evolution of cerium-based coatings on AZ31 magnesium alloys

68

Microstructural evolution of char under oxidation induced by uneven heating

69

Microstructural evolution of cobalt-doped barium cerate–zirconate at elevated temperatures under moist reducing conditions

70

Microstructural evolution of CoCrAlY bond coat on Ni-based superalloy DZ 125 at 1050 °C

71

Microstructural evolution of commercial pure iron during directional annealing

72

Microstructural evolution of copper clad steel bimetallic wire

73

Microstructural evolution of Cr–Mn–N austenitic steels during cold work hardening

74

Microstructural evolution of Cu-1 at% Ti alloy aged in a hydrogen atmosphere and its relation with the electrical conductivity

75

Microstructural evolution of Cu-1 at% Ti alloy aged in a hydrogen atmosphere and its relation with the electrical conductivity

76

Microstructural evolution of decagonal quasicrystal in the undercooled Al72Ni12Co16 alloy melts

77

Microstructural evolution of deformation-modified primary halite from the Middle Triassic Röt Formation at Hengelo, The Netherlands

78

Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep

79

Microstructural evolution of dilute Al–Mg alloys during processing by equal channel angular pressing and during subsequent annealing

80

Microstructural evolution of dilute Al–Mg alloys during processing by equal channel angular pressing and during subsequent annealing

81

Microstructural evolution of dual multi-phase intermetallic alloys composed of geometrically close packed Ni3X (X: Al and V) type structures

82

Microstructural evolution of duplex grain structure and interpretation of the mechanism for NiO scales grown on pure Ni- and Cr-doped substrates during high temperature oxidation

83

Microstructural evolution of duplex grain structure and interpretation of the mechanism for NiO scales grown on pure Ni- and Cr-doped substrates during high temperature oxidation

84

Microstructural evolution of electrically activated polypropylene/layered silicate nanocomposites investigated by in situ synchrotron wide-angle X-ray scattering and dielectric relaxation analysis

85

Microstructural Evolution of Electrochemically Cycled Si-Doped SnO2–Lithium Thin-Film Battery

86

Microstructural evolution of fast-fired nickel–zinc ferrites from hydrothermal nanopowders

87

Microstructural evolution of Fe–32%Ni alloy during large strain multi-axial forging

88

Microstructural evolution of Fe-rich particles in an Al–Zn–Mg–Cu alloy during equal-channel angular pressing

89

Microstructural evolution of fusion zone in laser beam welds of pure titanium

90

Microstructural Evolution of Gas Atomized Fe-25Cr-3. 2C Alloy Powders Original Research Article

91

Microstructural evolution of gold–aluminum wire-bonds

92

Microstructural evolution of IF-steel during cold rolling Original Research Article

93

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

94

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

95

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

96

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

97

Microstructural evolution of intermetallic layer in hot-dipped aluminide mild steel with silicon addition

98

Microstructural evolution of iron based metal–matrix composites submitted to simple shear

99

Microstructural evolution of irradiated tungsten: Ab initio parameterisation of an OKMC model

100

Microstructural evolution of magnesia-based castables containing microsilica

101

Microstructural evolution of martensitic 100Cr6 bearing steel during tempering: From thermoelectric power measurements to the prediction of dimensional changes Original Research Article

102

Microstructural evolution of Mg–Al–Ca–Sr alloy during creep

103

Microstructural evolution of mullite during the sintering of kaolin powder compacts

104

Microstructural evolution of multi-walled carbon nanotubes in the presence of mixture of silicon and silica powders at high temperatures

105

Microstructural evolution of nanocrystalline Al2O3 sintered at a high heating rate

106

Microstructural evolution of nanocrystalline chips particles produced via large strain machining during ball milling

107

Microstructural evolution of nanosized tungsten carbide during heatup stage of sintering of electroless nickel-coated nanostructured WC–Co powder

108

Microstructural evolution of nanostructured Ti0.7Ni0.3N prepared by reactive ball-milling

109

Microstructural evolution of NbF5-doped MgH2 exhibiting fast hydrogen sorption kinetics

110

Microstructural evolution of nickel-doped 9Cr steels irradiated in HFIR

111

Microstructural evolution of nuclear grade graphite induced by ion irradiation at high temperature environment

112

Microstructural evolution of oxides and semiconductor thin films

113

Microstructural evolution of P92 ferritic/martensitic steel under Ar+ ion irradiation at elevated temperature

114

Microstructural evolution of P92 ferritic/martensitic steel under argon ion irradiation

115

Micro-structural evolution of phenol-formaldehyde resin modified by boron carbide at elevated temperatures

116

Microstructural evolution of platinum modified nickel aluminide bond coat during thermal cycling

117

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

118

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

119

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

120

Microstructural evolution of proton irradiated T91

121

Microstructural evolution of PST-TiAl during low-rate compressive micro-straining at 1023 K in hard and soft orientations

122

Microstructural evolution of Pt-aluminide coating influenced by cycle oxidation service conditions

123

Microstructural evolution of reactive-sintered aluminum matrix composites

124

Microstructural evolution of reinforcements in the remelting in situ TiC/Al–12Si composites treated by ultrasonic vibration

125

Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment

126

Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment Original Research Article

127

Microstructural Evolution of Roll Bonded AlClad Stainless Steel Sheets at Elevated Temperatures

128

Microstructural evolution of SINQ irradiated austenitic stainless steels

129

Microstructural evolution of slowly solidified Cu-Ti-Zr-Ni amorphous alloy

130

Microstructural evolution of spinodally formed Fe35Ni15Mn25Al25

131

Microstructural evolution of superplasticity in large-grained Ni–48Al intermetallics

132

Microstructural evolution of superplasticity in large-grained Ni–48Al intermetallics

133

Microstructural Evolution of Surface Layer of TWIP Steel Deformed by Mechanical Attrition Treatment Original Research Article

134

Microstructural evolution of the deformed volume beneath microindents in tungsten and copper Original Research Article

135

Microstructural evolution of the NiCrAlY/CrON duplex coating system and its influence on mechanical properties

136

Microstructural evolution of the rapidly quenched Fe–Cr–B alloy thermal spray coatings

137

Microstructural evolution of the rapidly quenched Fe–Cr–B alloy thermal spray coatings

138

Microstructural evolution of the Seridَ Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

139

Microstructural evolution of thixomolded AZ91D magnesium alloy with process parameters variation

140

Microstructural evolution of Ti–6Al–4V during the sintering of microspheres of Ti for orthopedic implants

141

Microstructural evolution of transparent glass-ceramics containing Co2+: MgAl2O4 nanocrystals

142

Microstructural evolution of tungsten oxide thin films

143

Microstructural evolution of twin-roll cast Mg–3Al–0.5Mn–0.2Mm alloys during warm rolling and subsequent annealing

144

Microstructural evolution of wear-resistant FeCrB and FeCrNiCoB coating alloys during high-energy mechanical attrition

145

Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation

146

Microstructural evolution of Y2O3 and MgAl2O4 ODS EUROFER steels during their elaboration by mechanical milling and hot isostatic pressing

147

Microstructural evolution of YSZ electrolyte aerosol-deposited on porous NiO-YSZ

148

Microstructural evolution of ZrB2–MoSi2 composites during heat treatment

149

Microstructural evolution on ball-milling elemental blends of Ni, Al and Ti by Rietveld’s method

150

Microstructural evolution on streamlines during hot strip rolling using internal state variables

151

Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression

152

Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression

153

Microstructural evolution resulting from ionic diffusion in an electric field

154

Microstructural evolution resulting from ionic diffusion in an electric field

155

Micro-structural evolution subjected to combined tension–torsion deformation for pure copper

156

Microstructural evolution under high flux irradiation of dilute Fe–CuNiMnSi alloys studied by an atomic kinetic Monte Carlo model accounting for both vacancies and self interstitials

157

Microstructural evolution under load and high temperature deformation mechanisms of a mullite/alumina fibre

158

Microstructural evolution upon annealing in Ar-implanted Si

159

Microstructural evolution, creep, and tensile behavior of a Ti–22Al–25Nb (at%) orthorhombic alloy

160

Microstructural evolution, microhardness and thermal stability of HPT-processed Cu

161

Microstructural evolution, microhardness and thermal stability of HPT-processed Cu

162

Microstructural evolutions and cyclic softening of 9%Cr martensitic steels

163

Microstructural Evolutions and Mechanical Properties of Transient Liquid Phase Bonded WC-Co/St52 with BNi-2 Interlayer

164

Microstructural evolutions of LDPE/PA6 blends by rheological and rheo-optical analyses: Influence of flow and compatibilizer on break-up and coalescence processes

165

Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing Original Research Article

166

Microstructural examination and properties of premixed Al–Cu–Mg powder metallurgy alloy

167

Microstructural examination of concrete exposed to elevated temperature by using plane polarized transmitted light method

168

Microstructural examination of high temperature creep failure of Zircaloy-2 cladding in irradiated PHWR fuel pins

169

Microstructural examination of irradiated and unirradiated V–4Cr–4Ti pressurized creep tubes

170

Microstructural examination of layered coatings by scanning electron microscopy, transmission electron microscopy, and atomic force microscopy

171

Microstructural examination of low activation ferritic steels following irradiation in ORR at 330 and 400 °C to ∼10 dpa

172

Microstructural examination of oxide layers formed on an oxide dispersion strengthened ferritic steel exposed to supercritical water

173

Microstructural examination of quasi-static and dynamic shear in high-purity iron

174

Microstructural examination of service exposed coal mill liner material

175

Microstructural examination of V–(3–6%)Cr–(3–5%)Ti irradiated in the ATR-A1 experiment

176

Microstructural examination of V–(Fe or Cr)–Ti alloys after thermal-creep or irradiation-creep tests

177

Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy Original Research Article

178

Microstructural factors affecting hardness property of dual two-phase intermetallic alloys based on Ni3Al–Ni3V pseudo-binary alloy system

179

Microstructural factors controlling the survival of food-borne pathogens in porous media

180

Microstructural factors determining mechanical properties of laser-welded Ti–4.5Al–2.5Cr–1.2Fe–0.1C alloy for use in next-generation aircraft

181

Microstructural factors important for the development of high critical current density Nb3Sn strand Original Research Article

182

Microstructural factors of low cycle fatigue damage in two phase Al–Si alloys

183

Microstructural factors of low cycle fatigue damage in two phase Al–Si alloys

184

Microstructural factors that determine the weldability of a high Cr-high Si HK 40 alloy

185

Microstructural failure modes in three-phase glass syntactic foams

186

Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis

187

Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite

188

Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating

189

Microstructural features and deformation-induced lattice defects in hot-extruded Bi2Te3 thermoelectric compound

190

Microstructural features and domain formation in (Ba,Sr)2TiSi2O8 fresnoites

191

Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics

192

Microstructural features and mechanical properties of Al 5083/SiCp metal matrix nanocomposites produced by high energy ball milling and spark plasma sintering

193

Microstructural features and mechanical properties of AM60 and AZ31 friction stir spot welds

194

Microstructural features and orientation correlations of non-modulated martensite in Ni–Mn–Ga epitaxial thin films

195

Microstructural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOF process

196

Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C

197

Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy Original Research Article

198

Microstructural features of composite whey protein/polysaccharide gels characterized at different length scales

199

Microstructural features of consecutive layers of Stellite 6 deposited by laser cladding

200

Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800

201

Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800

202

Microstructural Features of Friction-Welded Ti-6AI-4V Joint

203

Microstructural features of intergranular brittle fracture and cold cracking in high strength aluminum alloys

204

Microstructural features of nanocomposite of alumina@carbon nanotubes/alumina nanoparticles synthesized by a solvothermal method

205

Microstructural features of pulsed-laser deposited V2O5 thin films

206

Microstructural features of TA15 titanium alloy under different temperature routes in isothermal local loading forming

207

Microstructural features of the ZrO2 interfacial coatings on SiC fibers before and after exposition to air at high temperatures

208

Microstructural features, diffusion and molecular relaxations in polyimide/silica hybrids

209

Microstructural features, texture and strengthening mechanisms of nanostructured AA6063 alloy processed by powder metallurgy

210

Microstructural formation in a hypereutectic Mg–Si alloy

211

Microstructural formations and phase transformation pathways in hot isostatically pressed tantalum carbides Original Research Article

212

Microstructural gradients in Ti–3Al–8V–6Cr–4Zr–4Mo for excellent HCF strength and toughness

213

Microstructural gradients in Ti–3Al–8V–6Cr–4Zr–4Mo for excellent HCF strength and toughness

214

Microstructural heterogeneities and fatigue anisotropy of forged steels

215

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites Original Research Article

216

Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing

217

Microstructural homogenization of ECAPed copper through post-rolling

218

Microstructural identification of thaumasite in concrete by backscattered electron imaging at low vacuum

219

Microstructural implications of non-random nucleation protocols in nanocrystallized metallic glasses

220

Microstructural improvement of sputtered ZrO2 thin films by substrate biasing

221

Microstructural improvements of the gradient composite material Pr0.6Sr0.4Fe0.8Co0.2O3/Ce0.8Sm0.2O1.9 by employing vertically aligned carbon nanotubes

222

Microstructural Indicators of Quality-related Characteristics of Blueberries-An Integrated Approach

223

Microstructural influence on erosion behaviour of thermal spray coatings

224

Microstructural influence on fatigue properties of a high-strength spring steel

225

Microstructural influence on fatigue properties of a high-strength spring steel

226

Microstructural influence on high temperature creep flow of Zr–1%NbO alloy in near-α, (α + β), and β temperature ranges in a high vacuum environment

227

Microstructural influence on low-temperature superplasticity of ultrafine-grained Ti–6Al–4V alloy

228

Microstructural influence on small fatigue cracks in a ferritic–martensitic steel

229

Microstructural influence on the early stages of interreaction of Al/Ni-investigated by TAP and HREM

230

Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

231

Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

232

Microstructural influences on consolidation behavior of titanium metal matrix composites

233

Microstructural influences on consolidation behavior of titanium metal matrix composites

234

Microstructural influences on consolidation behavior of titanium metal matrix composites

235

Microstructural influences on hydrogen delayed fracture of high strength steels

236

Microstructural influences on the decomposition of an Al-containing ferritic stainless steel

237

Microstructural influences on the growth of small cracks in Ti-6Al-4 V

238

Microstructural inhomogeneities in Cu–Ag–Zr alloys due to heavy plastic deformation

239

Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing

240

Microstructural inhomogeneity and biaxial stretching limits in aluminium alloy AA6016

241

Microstructural inhomogeneity in plasma-sprayed hydroxyapatite coatings and effect of post-heat treatment

242

Microstructural insight into pedestrian pelvic fracture as assessed by high-resolution computed tomography

243

Microstructural instability and embrittlement behaviour of an Al-lean, high-Nb γ-TiAl-based alloy subjected to a long-term thermal exposure in air

244

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

245

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

246

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

247

Microstructural instability in coated single crystal superalloys

248

Micro-structural integrity of dental enamel subjected to two tooth whitening regimes

249

Microstructural integrity of the corpus callosum linked with neuropsychological performance in adolescents

250

Microstructural interpretation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites

251

Microstructural investigation and the creep behavior of Mg–Sr–Mn alloys

252

Microstructural Investigation into Premature Failure of Compressor Turbine (CT) Blade Material of High Pressure (HP) PT6A-114A Engine

253

Microstructural investigation of a new complex oxide Ho2Mn2/3Nb4/3O7 with a pyrochlore-related structure

254

Microstructural investigation of a silica fume–cement–lime mortar

255

Microstructural investigation of AA 2195 T81 chips formed during a metal-cutting process

256

Microstructural investigation of Alloy 617 corroded in high-temperature helium environment

257

Microstructural Investigation of BaTiO3 Plasma Sprayed Coating Deposited by Splash and Disk-Like Splats

258

Microstructural investigation of cast medium-manganese austenitic steel with composite surface

259

Microstructural Investigation of Compressive Strength and Permeability of Concrete Containing Fly Ash in the Marine Environment of the Persian Gulf

260

Microstructural investigation of Cr–Hf–Si alloys

261

Microstructural investigation of Cu/Co multilayer films

262

Microstructural investigation of Cu/Co multilayer films

263

Microstructural investigation of dense membranes in relation to their gas transport properties

264

Microstructural investigation of deteriorated Portland cement concretes

265

Microstructural investigation of electrochemical hydrogen storage in amorphous Mg–Ni–La alloy

266

Microstructural investigation of friction stir welded 7050-T651 aluminium Original Research Article

267

Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition

268

Microstructural investigation of ice surfaces after rubber–ice and sand–ice sliding friction tests

269

Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion

270

Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion

271

Microstructural investigation of Nd-rich phase in sintered Nd-Fe-B magnets through electron microscopy

272

Microstructural investigation of nimesulide–crospovidone composites by X-ray diffraction and thermal analysis

273

Microstructural investigation of nimesulide–crospovidone composites by X-ray diffraction and thermal analysis

274

Microstructural investigation of phase transformations and properties during thermal processing of a 6 w/oAl-modified Ni–Cr–Fe ternary alloy

275

Microstructural investigation of Si-ion-irradiated single crystal 3C-SiC and SA-Tyrannohex SiC fiber-bonded composite at high temperatures

276

Microstructural investigation of Sr-modified Al–15 wt%Si alloys in the range from micrometer to atomic scale

277

Microstructural investigation of Sr-modified Al–15 wt%Si alloys in the range from micrometer to atomic scale

278

Microstructural investigation of the annealing behaviour of high-pressure torsion (HPT) deformed copper

279

Microstructural investigation of the effects of oxygen exposure on NARloy-Z

280

Microstructural investigation of the effects of oxygen exposure on NARloy-Z

281

Microstructural investigation of the PZT films prepared from the suspension of nanocrystalline powders

282

Microstructural investigation of the stability under irradiation of oxide dispersion strengthened ferritic steels

283

Microstructural investigation of the volume beneath nanoindentations in copper Original Research Article

284

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

285

Microstructural investigation of Ti/Au ohmic contacts on Ga doped single crystalline n-ZnO films

286

Microstructural investigation of uranium rich U–Zr–Nb ternary alloy system

287

Microstructural investigation of white etching layer on pearlite steel rail

288

Microstructural investigation on B4C/Al-7093 composite

289

Microstructural investigation on B4C/Al-7093 composite

290

Microstructural investigation on deformation behavior of high purity Fe–Cr–Ni austenitic alloys during tensile testing at different temperatures

291

Microstructural investigation on the mechanism to extract indium from wasted materials

292

Microstructural investigation on the mechanism to extract indium from wasted materials

293

Microstructural investigation on the relationship between microstructure and compressive strength of cement mortars

294

Microstructural investigation, using small-angle neutron scattering (SANS), of Optifer steel after low dose neutron irradiation and subsequent high temperature tempering

295

Microstructural investigation, using small-angle neutron scattering, of neutron irradiated Eurofer97 steel

296

Microstructural Investigations and Fracture Analysis of a Multi-Layer Al Panel of a Crashed Aircraft

297

Microstructural investigations in cordierite–mullite refractories

298

Micro-structural investigations in the glacial state of triphenyl phosphite

299

Microstructural investigations into the low cycle fatigue deformation of a Cu–Cr–Zr–Ti alloy

300

Microstructural investigations of ferrite nanoparticles prepared by nonaqueous precipitation route

301

Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites

302

Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites Original Research Article

303

Microstructural Investigations of Nanostructured La (Sr)MnO3-(delta) Films Deposited by Electrostatic Spray Deposition

304

Microstructural investigations of naturally and artificially weathered autoclaved aerated concrete

305

Microstructural investigations of reduced magnesium titanate spinels which have shown anomalous resistance behaviour

306

Microstructural investigations of strain-related collagen mineralization

307

Microstructural investigations on aerated concrete

308

Microstructural investigations on as-cast and annealed Al–Sc and Al–Sc–Zr alloys

309

Microstructural investigations on strongly stained olivines of the chassignite NWA 2737 and implications for its shock history

310

Microstructural investigations on zirconium oxide–carbon nanotube composites synthesized by hydrothermal crystallization Original Research Article

311

Microstructural kinetics of phase transformations during electrochemical reduction of titanium dioxide in molten calcium chloride Original Research Article

312

Microstructural length-scale effects in the nanoindentation behavior of thin gold films Original Research Article

313

Microstructural manifestation of dynamic strain aging in AISI 316 stainless steel

314

Microstructural manifestations in color: Some applications for steels

315

Microstructural manipulation of electrospun scaffolds for specific bending stiffness for heart valve tissue engineering

316

Microstructural mechanical properties and yield point effects in Mo alloys

317

Microstructural mechanical properties and yield point effects in Mo alloys

318

Microstructural mechanisms controlling fatigue crack growth in Al–Si–Mg cast alloys

319

Microstructural mechanisms controlling fatigue crack growth in Al–Si–Mg cast alloys

320

Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure

321

Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure

322

Microstructural mechanisms governing the fatigue failure of polyamide 66 fibres

323

Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation

324

Microstructural modeling in f.c.c. crystalline materials in a unified dislocation-density framework

325

Microstructural modeling of adaptive nanocomposite coatings for durability and wear

326

Microstructural modeling of dynamic recrystallization using irregular cellular automata

327

Microstructural modeling of ferroelectric fracture Original Research Article

328

Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy

329

Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy

330

Microstructural modeling of solidification in A356 alloy

331

Microstructural modeling of thermal conductivity of high burn-up mixed oxide fuel

332

Microstructural modelling in metals processing

333

Microstructural modelling of aluminium alloys during thermomechanical processing

334

Microstructural modelling of aluminium alloys during thermomechanical processing

335

Microstructural modelling of dynamic recrystallisation using an extended cellular automaton approach

336

Microstructural modelling of electrical conductivity and mechanical properties of sintered ferrous materials

337

Microstructural modelling of equal channel angular pressing for producing ultrafine grained materials

338

Microstructural modelling of nuclear graphite using multi-phase models

339

Microstructural modelling of stress-dependent behaviour of clay

340

Microstructural modelling solution for complex Co based alloys and coatings

341

Microstructural modification and ductility enhancement of surfaces modified by FSP in aluminium alloys

342

Microstructural modification and hardness improvement of titanium-base surface-alloyed materials fabricated by high-energy electron beam irradiation

343

Microstructural modification and porosity evolution during carbonization of fuel element compact for HTGR

344

Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy

345

Microstructural modification due to reheating in multipass manual metal arc welds of 9Cr–1Mo steel

346

Microstructural modification of chalcogenide glasses by femtosecond laser

347

Microstructural modification of LiNbO3 crystals induced by femtosecond laser irradiation

348

Microstructural modification of the anode/electrolyte interface of SOEC for hydrogen production

349

Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel

350

Microstructural modifications in -brass targets after small charge explosions

351

Microstructural modifications in Portland cement concrete due to forced ionic migration tests. Study by impedance spectroscopy

352

Microstructural modifications in α-brass targets after small charge explosions

353

Microstructural modifications induced by hydrogen absorption in Mg5Ga2 and Mg6Pd Original Research Article

354

Microstructural modifications induced by spray forming of Al–Cu alloys

355

Microstructural modifications induced by spray forming of Al–Cu alloys

356

Microstructural modifications induced by the entrapped glucose oxidase in cross-linked polyacrylamide microgels used as glucose sensors

357

Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties

358

Microstructural modifications of ferroelectric lead zirconate titanate ceramics due to bipolar electric fatigue

359

Microstructural modifications of Ni–Ti shape memory alloy thin films induced by electronic stopping of high-energy heavy ions

360

Microstructural modifications resulting from the dehydration of gypsum

361

Microstructural morphology effects on fracture resistance and crack tip strain distribution in Ti–6Al–4V alloy for orthopedic implants

362

Microstructural morphology of electrospark deposition layer of a high gamma prime superalloy

363

Microstructural musical linguistics: composersʹ pulses are liked most by the best musicians

364

Microstructural observation and tensile properties of ODS-304 austenitic steel

365

Microstructural observation of organic thin film in optical recording

366

Microstructural observation of organic thin film in optical recording

367

Microstructural observations and mechanisms of lamellar coarsening in iron meteorites

368

Microstructural observations in new matrix glass fibre reinforced cement

369

Microstructural observations of as-prepared and thermal cycled NiCoCrAlY bond coats

370

Microstructural observations of polycrystalline diamond: a contribution to the carbonado conundrum

371

Microstructural observations of shear zones in sensitive clay

372

Microstructural observations of spheroidization from a lamellar structure in iron meteorites

373

Microstructural Observations on Nissl Substances in the Cerebellar Cortex of Adult Wistar Rats following Quinine Administration

374

Microstructural optimization and extended durability studies of low-cost rough graphite–aluminium solar absorber surfaces

375

Microstructural optimization of alloys using a genetic algorithm

376

Microstructural optimization of alloys using a genetic algorithm

377

Microstructural optimization of functionally graded composites subjected to a thermal gradient via the coupled higher-order theory

378

Microstructural optimization of high-temperature SiC/SiC composites by NITE process

379

Microstructural optimization of mordenite membrane for pervaporation dehydration of acetic acid

380

Micro-structural optimization of supported γ-alumina membranes

381

Microstructural organization of polydimethylsiloxane soft segment polyurethanes derived from a single macrodiol

382

Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering

383

Microstructural origin of physical and mechanical properties of ultra high molecular weight polyethylene processed by high velocity compaction

384

Microstructural origin of the dielectric breakdown strength in alumina: A study by positron lifetime spectroscopy

385

Microstructural origins of radiation-induced changes in mechanical properties of 316 L and 304 L austenitic stainless steels irradiated with mixed spectra of high-energy protons and spallation neutrons

386

Microstructural parameters affecting creep induced load shedding in Ti-6242 by a size dependent crystal plasticity FE model

387

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

388

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

389

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

390

Microstructural parameters and optical constants of CdS thin films synthesized with various bath temperature

391

Microstructural parameters controlling gas permeability and permselectivity in polyimide membranes

392

Microstructural parameters governing cleavage fracture behaviors in the ductile–brittle transition region in reactor pressure vessel steels

393

Microstructural parameters governing cleavage fracture behaviors in the ductile–brittle transition region in reactor pressure vessel steels

394

Microstructural parameters of dispersion strengthened Cu–Al2O3 materials

395

Microstructural Parameters of Hydroxypropylmethylcellulose Films Using X-ray Data

396

Microstructural path and temperature dependence of recrystallization in commercial aluminum Original Research Article

397

Microstructural pathways for the densification of slip cast alumina

398

Microstructural pattern formation in finite-deformation single-slip crystal plasticity under cyclic loading: Relaxation vs. gradient plasticity

399

Microstructural penetrometry of asteroid regolith analogues and Titan’s surface

400

Microstructural phenomena in low-firing ceramics

401

Microstructural pocesses: a special issue in honor of the career contributions of R.H. Vernon

402

Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel

403

Microstructural processes during subcritical crack growth in hard metals and cermets under cyclic loads

404

Microstructural processes during subcritical crack growth in hard metals and cermets under cyclic loads

405

Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy

406

Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy

407

Microstructural properties of (In,Ga)2Se3 precursor layers for efficient CIGS thin-film solar cells

408

Microstructural properties of amorphous carbon nitride films synthesised by dc magnetron sputtering

409

Microstructural properties of an electrochromic WO3 thin film

410

Microstructural properties of boehmite formed under hydrothermal conditions

411

Microstructural properties of boehmite formed under hydrothermal conditions

412

Microstructural properties of Co thin films grown on p-GaAs (1 0 0) Substrates

413

Microstructural properties of electrochemically prepared Ni–Fe–W powders

414

Microstructural properties of fat during the accelerated ripening of ultrafiltered-Feta cheese

415

Microstructural properties of Fe–oxide powders obtained by precipitation from FeCl3 solutions

416

Microstructural properties of Fe–oxide powders obtained by precipitation from FeCl3 solutions

417

Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate

418

Microstructural Properties of Heat-set Whey Protein Gels: Effect of pH

419

Microstructural properties of laser synthesized Si/C/N nanoparticles

420

Microstructural properties of plasma-enhanced chemical vapor deposited WNx films using WF6–H2–N2 precursor system

421

Microstructural properties of plasma-enhanced chemical vapor deposited WNx films using WF6–H2–N2 precursor system

422

Microstructural Properties of Semisolid Welded Joints for AISI D2 Tool Steel

423

Microstructural properties of SiC based hardfacing on low alloy steel

424

MICROSTRUCTURAL REARRANGEMENT OF SODIUM CHLORIDE CONDENSATION AEROSOL PARTICLES ON INTERACTION WITH WATER VAPOR

425

Microstructural refinement and deformation mode of Ti under cryogenic channel die compression

426

Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression

427

Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition Original Research Article

428

Microstructural refinement and strengthening of Nd-bearing TiAl alloys

429

Microstructural refinement and strengthening of Nd-bearing TiAl alloys

430

Microstructural refinement and tensile properties enhancement of Mg–3Al alloy using charcoal additions

431

Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion

432

Microstructural refinement and wear property of Al–Si–Cu composite subjected to extrusion and high-pressure torsion

433

Microstructural refinement of an Fe–C alloy within the ferritic range via two different strain paths

434

Microstructural refinement of AZ91D die-cast alloy by intensive shearing

435

Microstructural refinement of boron-containing β-solidifying γ-titanium aluminide alloys through heat treatments in the β phase field

436

Microstructural refinement of cast p-type Bi2Te3–Sb2Te3 by equal channel angular extrusion Original Research Article

437

Microstructural refinement of CP-Ti by cryogenic channel-die compression involving mechanical twinning

438

Microstructural refinement of DC cast AZ80 Mg billets by low frequency electromagnetic vibration

439

Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding

440

Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding

441

Microstructural refinement process of pure magnesium by electromagnetic vibrations

442

Microstructural refinement through inoculation of type 7020 Al–Zn–Mg alloy welds and its effect on hot cracking and tensile properties

443

Microstructural refinement using ball-milling and spark-plasma sintering of MgH2 based materials for hydrogen storage

444

Microstructural refinement using ball-milling and spark-plasma sintering of MgH2 based materials for hydrogen storage

445

Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel

446

Microstructural relationship with fracture toughness of undoped and rare earths (Y, La) doped Al2O3–ZrO2 ceramic composites

447

Micro-structural reliability design of brittle materials

448

Microstructural requirements for alumina-SiC nanocomposites

449

Microstructural requirements for alumina-SiC nanocomposites

450

Microstructural research on hot strips of low carbon steel produced by a compact strip production line under different thermal histories

451

Microstructural resistance of snow following first wetting

452

Microstructural response of an Al-modified Ni–Cr–Fe ternary alloy during thermal processing

453

Microstructural response of pure copper to cryogenic rolling Original Research Article

454

Microstructural response on the room temperature low cycle fatigue behaviour of two high strength duplex ferrite–martensite steels and a normalised ferrite–pearlite steel

455

Microstructural response to heat affected zone cracking of prewelding heat-treated Inconel 939 superalloy

456

Microstructural revolution of CIGS thin film using CuInGa ternary target during sputtering process

457

Microstructural scale strain localisation in nuclear graphite

458

Microstructural self-healing effect of hydrothermal crystallization on bonding strength and failure mechanism of hydroxyapatite coatings

459

Microstructural self-organization triggered by twin boundaries during dry sliding wear Original Research Article

460

Microstructural sensitivity of 316H austenitic stainless steel: Residual stress relaxation and grain boundary fracture

461

Microstructural simulation in spinodally-decomposed Cu–70 at.%Ni and Cu–46 at.%Ni–4 at.%Fe alloys

462

Microstructural Simulation of Asphalt Materials: Modeling and Experimental Studies

463

Microstructural size effects on mechanical properties of high purity nickel

464

Microstructural stability and creep behavior of a lamellar γ-TiAl based alloy with extremely fine lamellar spacing

465

Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91 + 2RE magnesium alloys

466

Microstructural stability and mechanical properties of a new nickel-based superalloy

467

Microstructural stability and mechanical properties of a newly developed Ni–Fe-base superalloy

468

Microstructural stability and room temperature mechanical properties of the Nextel 720 fibre

469

Microstructural stability and short-term creep properties of 12Cr–W–Mo–Co steel

470

Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni–P alloy Original Research Article

471

Microstructural stability controls the hydraulic conductivity of smectitic buffer clay

472

Microstructural stability during low temperature exposure of alloys within the Al–Li–Cu–Mg system

473

Microstructural stability in multi-alloy systems: Nanostructured two-phase, dual alloy multilayers Original Research Article

474

Microstructural stability of a cast Ti–45.2Al–2W–0.6Si–0.7B alloy at temperatures 973–1073 K

475

Microstructural stability of an HT-9 fuel assembly duct irradiated in FFTF

476

Microstructural stability of Cu processed by different routes of severe plastic deformation

477

Microstructural stability of Cu–Nb microcomposite wires fabricated by the bundling and drawing process

478

Microstructural stability of Cu–Nb microcomposite wires fabricated by the bundling and drawing process

479

Microstructural stability of fcc-γ+B2-β coatings on γ substrate in Ni–Cr–Al system — A phase field model study

480

Microstructural stability of modified 9Cr–1Mo steel during long term exposures at elevated temperatures

481

Microstructural stability of nanostructured Cu–Nb–W alloys during high-temperature annealing and irradiation Original Research Article

482

Microstructural stability of rapidly quenched AlFeMo alloys

483

Microstructural stability of rapidly quenched AlFeMo alloys

484

Microstructural stability of reduced activation ferritic/martensitic steels under high temperature and stress cycling

485

Microstructural stability of SiC and SiC/SiC composites under high temperature irradiation environment

486

Microstructural stability of Sn–1Ag–0.5Cu–xAl (x = 1, 1.5, and 2 wt.%) solder alloys and the effects of high-temperature aging on their mechanical properties

487

Microstructural stability of the intermetallic Ti–45Al–2W–0.5Si–0.5B in the 800–980 °C temperature range

488

Microstructural stability of γ-based TiAl intermetallics containing β phase

489

Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 steel

490

Microstructural stress relaxation mechanics in functionally different tendons

491

Microstructural studies and crystallographic orientation of different zones and δ-hydrides in resistance welded Zircaloy-4 sheets

492

Microstructural studies and electrical properties of Mg-doped SrTiO3 thin films Original Research Article

493

Microstructural studies and remnant life assessment of eleven years service exposed reformer tube

494

Microstructural studies and wear assessments of Ti/TiC surface composite coatings on commercial pure Ti produced by titanium cored wires and TIG process

495

Microstructural studies of 35 °C Copper Ni–Ti orthodontic wire and TEM confirmation of low-temperature martensite transformation

496

Microstructural studies of crystallization of a Zr-based bulk metallic glass Original Research Article

497

Microstructural studies of Fe-silicide films produced by metal vapor vacuum arc ion implantation of Fe into Si substrates

498

Microstructural studies of friction stir welds in 2024-T3 aluminum

499

Microstructural studies of friction stir welds in 2024-T3 aluminum

500

Microstructural studies of GaN grown on (0001) sapphire by MOVPE

501

Microstructural studies of GaN grown on (0001) sapphire by MOVPE

502

Micro-structural studies of GeSe2–Ga2Se3–MX (MX = CsI and PbI2) glasses using Raman spectra

503

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

504

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

505

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

506

Microstructural studies of metal/ferrite composite thin films

507

Microstructural studies of nanocrystalline CeO2 produced by gas condensation

508

Microstructural studies of nanocrystalline α-alumina powder produced from Al13-cluster Original Research Article

509

Microstructural studies of PZT thick films on Cu foils Original Research Article

510

Microstructural studies of quenched partially-melted Y-123 materials and Y-123 with Y-211, PtO2 and CeO2 additions

511

Microstructural studies of quenched partially-melted Y-123 materials and Y-123 with Y-211, PtO2 and CeO2 additions

512

Microstructural studies of TiN coatings prepared by PVD and IBAD

513

MICROSTRUCTURAL STUDIES OF Ti-REFINED Al2014 ALLOY PREPARED BY SIMA PROCESS

514

Microstructural studies on BaCl2 doped poly(vinyl alcohol)

515

Microstructural studies on degradation of interface between LSM–YSZ cathode and YSZ electrolyte in SOFCs

516

Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications

517

Microstructural studies on phase evolution sequence in rapidly solidified Zr3Al based binary and ternary alloys

518

Microstructural studies on phase evolution sequence in rapidly solidified Zr3Al based binary and ternary alloys

519

Microstructural studies on Pr–Fe–B–Cu magnets produced by upset forging of cast ingot

520

Microstructural studies on Pr–Fe–B–Cu magnets produced by upset forging of cast ingot

521

Microstructural studies on some ordered Ti-based alloys

522

Microstructural studies on the reoxidation behavior of Nb-doped SrTiO3 ceramics

523

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB2 particles

524

Microstructural study and electrochemical behavior of low alloy steel weldment

525

Microstructural study and wear behavior of ductile iron surface alloyed by Inconel 617

526

Microstructural study by XPS and GISAXS of surface layers formed via phase separation and percolation in polystyren/tetrabutyl titanate/alumina composite films

527

Microstructural study in heteroepitaxial YBa/sub 2/Cu/sub 3/O/sub 7//Nd/sub 2/CuO/sub 4/ multi-layers by using electron microscopy

528

Microstructural study of (Co–Ni–Fe) based alloys

529

Microstructural study of a natural slip zone: quantification and deformation history

530

Microstructural study of a titanium-based biocomposite produced by the powder metallurgy process with TiH2 and nanometric β-TCP powders

531

Microstructural study of adiabatic shear bands formed by high-speed impact in a tungsten heavy alloy penetrator

532

Microstructural study of adiabatic shear bands formed by high-speed impact in a tungsten heavy alloy penetrator

533

Microstructural study of aged ferrite powders for sensing layers

534

Microstructural Study of Al-Si-Mg Alloy Reinforced with Stainless Steel Wires Composite via Casting Technique

535

Microstructural Study of Aluminium Alloy A390 After Milling Process

536

Microstructural study of an age hardenable martensitic steel deformed by equal channel angular pressing

537

Microstructural study of annealed Cr/Si system using cross-sectional TEM combined with nano-analysis

538

Microstructural study of annealed gold–silicon thin films under nanoindentation

539

Microstructural study of aromatic polyamide membrane material

540

Microstructural study of asphaltene precipitated with methylene chloride and n-hexane☆

541

Microstructural study of BaTiO3/SrTiO3 superlattice

542

Microstructural study of carbonated cement-solidified synthetic heavy metal waste

543

Microstructural study of carbonized wood after cell wall sectioning

544

Microstructural study of CdS/opal composites Original Research Article

545

Microstructural study of CO2 laser machined heat affected zone of 2024 aluminum alloy

546

Microstructural study of Crofer 22 APU-glass interface for SOFC application

547

Microstructural study of cryogenically treated En 31 bearing steel

548

Microstructural study of different LDH morphologies obtained via different synthesis routes Original Research Article

549

Microstructural study of EC316LN and its welds irradiated in SINQ target-3

550

Microstructural study of equiatomic PtTi martensite and the discovery of a new long-period structure Original Research Article

551

Microstructural study of frozen batter-coated squid rings prepared by an innovative process without a pre-frying step

552

Microstructural study of gamma phase stability in U–9 wt.% Mo alloy

553

Micro-structural study of high-Mn TWIP steels using diffraction profile analysis

554

Microstructural study of high-temperature Cr–Ni–Al–Ti alloys supported by first-principles calculations

555

Microstructural study of hydride formation in Zr–1Nb alloy

556

Microstructural study of hydrogen desorption in 2NaBH4 + MgH2 reactive hydride composite

557

Microstructural study of irradiated isotopically tailored F82H steel

558

Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stones

559

Microstructural study of opaque glazes obtained from frits of the system: SiO2-Al2O3-B2O3-(P2O5)-CaO-K2O-TiO2

560

Microstructural study of pre-yielding and pre-yield cracking in TiAl-based alloys

561

Microstructural study of residual stress in chemically vapor deposited β-SiC

562

Microstructural study of silica-doped zirconia ceramics Original Research Article

563

MICROSTRUCTURAL STUDY OF SILICON NITRIDE WHISKERS PRODUCED BY NITRIDATION OF PLASMA-SPRAYED SILICON LAYERS

564

Microstructural study of strain localization in a compressed Mg–3Al–1Zn alloy

565

Microstructural study of strain localization in hot compressed Mg–3Al–1Zn alloy

566

Microstructural study of sulfate attack on ordinary and limestone Portland cements at ambient temperature

567

Microstructural study of surface melted and chromium surface alloyed ductile iron

568

Microstructural study of the aluminium/nickel aluminide interface formed in a hot-pressed in situ composite

569

Microstructural study of the CO2 absorption in SrxCa1−xFe0.5Co0.5O3−δ

570

Microstructural study of the initiation and formation of immersion tin coating on copper

571

Microstructural study of the initiation and formation of immersion tin coating on copper

572

Microstructural study of the initiation and formation of immersion tin coating on copper

573

Microstructural study of the LiBH4–MgH2 reactive hydride composite with and without Ti-isopropoxide additive Original Research Article

574

Microstructural study of titanium carbonitride produced by combustion synthesis

575

Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature

576

Microstructural study of tungsten influence on Co–Cr alloys

577

Microstructural study of tungsten influence on Co–Cr alloys

578

Microstructural study of tungsten influence on Co–Cr alloys

579

Microstructural study of vapour grown carbon nanofibre/copper composites

580

Microstructural study of WWER reactor pressure vessel steels

581

Microstructural study on 90° basal-plane-faced tilt boundaries showing d-wave paring characteristics

582

Microstructural study on 90° basal-plane-faced tilt boundaries showing d-wave paring characteristics

583

Microstructural Study on Oxidation of Aluminized Coating on Inconel 625

584

Microstructural study on the inhibition of immersion tin coating formation by the substrate surface contamination

585

Microstructural tailoring and improvement of mechanical properties in CuZr-based bulk metallic glass composites Original Research Article

586

Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation

587

Microstructural thermostability of high nitrogen austenitic stainless steel

588

Microstructural tomography of a superalloy using focused ion beam microscopy

589

Microstructural tomography of a superalloy using focused ion beam microscopy

590

Microstructural transformations and mechanical properties of cast NiAl bronze: Effects of fusion welding and friction stir processing

591

Microstructural transformations of TiO2, Al2O3+13TiO2 and Al2O3+40TiO2 at plasma spraying and laser engraving

592

Microstructural transformations of two representative slags at high temperatures and effects on the viscosity

593

Microstructural transitions in Al–Cu ribbons manufactured by planar flow casting

594

Microstructural transitions in Al–Cu ribbons manufactured by planar flow casting

595

Microstructural variation and dielectric properties of KTiNbO5 and K3Ti5NbO14 ceramics

596

Microstructural Variation in Quartzofeldspathic Mylonites: Example from Schirmacher Hills, East Antarctica

597

Microstructural variation of a cast Ti48Al2W0.5Si alloy during quenching and tempering

598

Microstructural variation of a cast Ti48Al2W0.5Si alloy during quenching and tempering

599

Microstructural Viscoplastic Continuum Model for Permanent Deformation in Asphalt Pavements

600

Microstructural weathering of sedimentary rocks by freeze–thaw cycles: Experimental study of state and transfer parameters

601

Microstructural white matter correlates of emotion recognition impairment in Amyotrophic Lateral Sclerosis

602

Microstructural white matter damage at orbitofrontal areas in borderline personality disorder

603

Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

604

Microstructural, compositional and residual stress evaluation of CO2 laser welded superaustenitic AISI 904L stainless steel

605

Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation

606

Microstructural, crystal structure and electrical characteristics of shock-consolidated Ga2O3 doped ZnO bulk

607

Microstructural, dielectric and ferroelectric properties of calcium-modified lead titanate thin films derived by chemical processes

608

Microstructural, dielectric and spectroscopic properties of Li2O–Nb2O5–ZrO2–SiO2 glass system crystallized with V2O5 Original Research Article

609

Microstructural, electrical and magnetic properties of multiferroic CoFe2O4/0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3 nanocomposite thin films

610

Microstructural, electrical and optical properties of indium tin oxide (ITO) nanoparticles synthesized by co-precipitation method

611

Microstructural, electrical and optical properties of ZnO:Mo thin films with various thickness by spray pyrolysis

612

Microstructural, electrical and optical properties of ZnO:Mo thin films with various thickness by spray pyrolysis

613

Microstructural, electrical and reliability aspects of chromium doped Ni–Mn–Fe–O NTC thermistor materials

614

Micro-structural, electron-spectroscopic and field-emission studies of carbon nitride nanotubes grown from cage-like and linear carbon sources Original Research Article

615

Microstructural, magnetic and mechanical property changes in an AISI 444 stainless steel aged in the 560 °C to 800 °C range

616

Microstructural, magnetotransport, and electronic subband studies of InAsxP1−x/InP modulation-doped strained single quantum wells Original Research Article

617

Microstructural, mechanical and fractographical study of titanium-CP and Ti–6Al–4V similar brazing with Ti-based filler

618

Microstructural, mechanical and oxidation features of NiCoCrAlY coating produced by plasma activated EB-PVD

619

Microstructural, mechanical and thermal characterisation of sol–gel-derived aluminium titanate–mullite ceramic composites Original Research Article

620

Microstructural, mechanical and tribological analysis of nanocomposite Ti–C–N coatings deposited by industrial-scale DC magnetron sputtering

621

Microstructural, mechanical and tribological characterisation of roll materials for the finishing stands of the hot strip mill for steel rolling

622

Microstructural, mechanical and tribological properties of tungsten-gradually doped diamond-like carbon films with functionally graded interlayers

623

Microstructural, mechanical and wear behavior of A390/graphite and A390/Al2O3 surface composites fabricated using FSP

624

Microstructural, mechanical and wear properties of Cr–Al–B–N coatings deposited by DC reactive magnetron co-sputtering

625

Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys

626

Microstructural, mechanical, and corrosion characterization of nitrogen-implanted plastic injection mould steel

627

Microstructural, mechanical, and corrosion characterization of plasma-nitrided plastic injection mould steel

628

Microstructural, mechanical, electrical and thermal characterization of arc-melted Ni–Si and Co–Si alloys

629

Microstructural, microchemical, and mechanical changes associated with the clinical reuse of two nickel–titanium endodontic instruments

630

Microstructural, optical and electrical investigations of Sb-SnO2 thin films deposited by spray pyrolysis

631

Microstructural, optical and electrical studies on sol gel derived ZnO and ZnO:Al films

632

Microstructural, optical and electrical transport properties of WO3 nanoparticles coated polypyrrole hybrid nanocomposites

633

Microstructural, optical and electrical transport properties of WO3 nanoparticles coated polypyrrole hybrid nanocomposites

634

Microstructural, optical and magnetic properties of cobalt-doped zinc oxysulfide thin films

635

Microstructural, optical and quantum confinement effect study of mechanically synthesized ZnTe quantum dots Original Research Article

636

Microstructural, optical and spectroscopic studies of laser ablated nanostructured tantalum oxide thin films

637

Microstructural, optical and thermal characterization of synthetic clay as a passive cooling medium

638

Microstructural, optical, and electrical properties of Ni–Al co-doped ZnO films prepared by DC magnetron sputtering

639

Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation

640

Microstructural, Raman and XPS properties of single-crystalline Bi3.15Nd0.85Ti3O12 nanorods

641

Microstructural, structural and dielectric properties of Er3+-modified BaTi0.85Zr0.15O3 ceramics

642

Microstructural, structural and electrical properties of La3+-modified Bi4Ti3O12 ferroelectric ceramics

643

Microstructural, structural, dielectric and piezoelectric properties of potassium sodium niobate thick films

644

Microstructural, thermal and mechanical properties of HVOF sprayed Ni–Al-based bond coatings on stainless steel substrate

645

Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles

646

Microstructural, tribological and corrosion aspects of thermally sprayed Ti–Cr–Si coatings

647

Microstructural-deformation record of an orogen-parallel extension in the Vepor Unit, West Carpathians

648

Microstructurally induced computational and material instabilities

649

Microstructurally induced fracture nucleation and propagation in martensitic steels

650

Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al

651

Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al

652

Microstructure Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications

653

Microstructure – cyclic deformation property relationships of biodegradable di-crystalline triblock copolymers

654

Microstructure & rheology of mixed colloidal dispersions: Influence of pH-induced droplet aggregation on starch granule–fat droplet mixtures Original Research Article

655

Microstructure affects the rate of chemical, physical and color changes during storage of dried apple discs Original Research Article

656

Microstructure after superplastic creep of alumina–zirconia composites prepared by powder alcoxide mixtures

657

Microstructure alterations at the surface of a heavily corrugated rail with strong ripple formation

658

Microstructure alterations in beef intramuscular connective tissue caused by hydrodynamic pressure processing

659

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA = 0.15 C-2.5 Cr-0.7 Mo-0.3 V

660

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA = 0.15 C-2.5 Cr-0.7 Mo-0.3 V

661

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA ≈0.15 C–2.5 Cr–0.7 Mo–0.3 V Original Research Artic

662

Microstructure analyses and thermoelectric properties of image

663

Microstructure analyses of autoclaved ground dune sand–Portland cement paste

664

Microstructure analyses of CrN coating synthesized by a hybrid PVD and metal-plasma ion implantation process

665

Microstructure Analyses of Metal-Filled Carbon Nanotubes Synthesized by Microwave Plasma-Enhanced Chemical Vapor Deposition

666

Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators

667

Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators

668

Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys

669

Microstructure analysis and mechanical properties of a new class of Al2O3–WC nanocomposites fabricated by spark plasma sintering

670

Microstructure analysis and thermal properties of l-lactide/ɛ-caprolactone copolymers obtained with magnesium octoate

671

Microstructure analysis of 304L austenitic stainless steel by QPQ complex salt bath treatment

672

Microstructure Analysis of 4-Step Three-Dimensional Braided Composite

673

Microstructure analysis of a Cr–Ni multilayer pulse-electroplated in a bath containing trivalent chromium and divalent nickel ions

674

Microstructure analysis of aluminum extrusion: Prediction of microstructure on AA6060 alloy

675

Microstructure analysis of a-SiC:H thin films grown by high-growth-rate PECVD

676

Microstructure analysis of AZ31 magnesium alloy welds using phase-field models Original Research Article

677

Microstructure Analysis of Bio Engineered Concrete under the Concept of Self-Healing

678

Microstructure analysis of Cf/SiC–ZrC composites in both fabrication and plasma wind tunnel testing processes

679

Microstructure analysis of Co–Cu alloys undercooled prior to solidification

680

Microstructure analysis of Co–Cu alloys undercooled prior to solidification

681

Microstructure analysis of magnesium alloy melted by laser irradiation

682

Microstructure analysis of Ni laterite agglomerates for enhanced heap leaching

683

Microstructure analysis of nodular iron 400-12 after laser surface melt hardening

684

Microstructure analysis of plasma nitrided cast/forged CoCrMo alloys

685

Microstructure analysis of reconstructed porous media

686

Microstructure analysis of the ferromagnetic Ag–Ni system synthesized by pulsed electrodeposition

687

Microstructure analysis of the interface situation and adhesion of thermally formed nickel silicide for plated nickel–copper contacts on silicon solar cells

688

Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM)

689

Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM)

690

Microstructure analysis of zirconium carbide layer on pyrocarbon-coated particles prepared by zirconium chloride vapor method

691

Microstructure analysis on pre-treated apple slices and its effect on water release during air drying Original Research Article

692

Microstructure analysis using temperature-induced contrast variation in small-angle scattering

693

Microstructure Analysis, Physical and Thermal Properties of Al2O3- Al2TiO5 Functionally Graded Ceramics for the Application of Car Brake Rot

694

Microstructure and 3D microtomographic characterization of porosity of MAO surface layers formed on aluminium and 2214-T6 alloy

695

Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr–Ti Original Research Article

696

Microstructure and ablation behavior of hafnium carbide coating for carbon/carbon composites

697

Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process Original Research Article

698

Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method

699

Microstructure and ablation mechanism of C/C–SiC composites

700

Microstructure and ablation mechanism of graphite/SiC composites under oxy-acetylene flame

701

Microstructure and ablation performances of dual-matrix carbon/carbon composites Original Research Article

702

Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites Original Research Article

703

Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering

704

Microstructure and Abrasive Wear Behavior of Medium Carbon Low Alloy Martensitic Abrasion Resistant Steel Original Research Article

705

Microstructure and abrasive wear behaviour of FeCr–TiC coatings deposited by HVOF spraying of SHS powders

706

Microstructure and abrasive wear characteristics of in situ vanadium carbide particulate-reinforced iron matrix composites

707

Microstructure and abrasive wear in silicon nitride ceramics

708

Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating

709

Microstructure and activation characteristics of Mg–Ni alloy modified by multi-walled carbon nanotubes

710

Microstructure and adherence of cobalt containing and cobalt free enamels to low carbon steel

711

Microstructure and adhesion of 100Cr6 steel coatings thermally sprayed on a 35CrMo4 steel substrate

712

Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings

713

Microstructure and adhesion strength of Sn–9Zn–xAg lead-free solders wetted on Cu substrate

714

Microstructure and age characterization of Cu–15Ni–8Sn alloy coatings by laser cladding

715

Microstructure and aggregation behavior of methylcelluloses prepared in NaOH/urea aqueous solutions

716

Microstructure and aggregation behavior of methylcelluloses prepared in NaOH/urea aqueous solutions

717

Microstructure and anisotropic mechanical properties of graphene nanoplatelet toughened biphasic calcium phosphate composite

718

Microstructure and anisotropic swelling behaviour of compacted bentonite/sand mixture

719

Microstructure and anti-adhesion properties of PES/TAP/Ag hybrid ultrafiltration membrane Original Research Article

720

Microstructure and antibacterial properties of microwave plasma nitrided layers on biomedical stainless steels

721

Microstructure and antibacterial property of in situ TiO2 nanotube layers/titanium biocomposites

722

Microstructure and antibacterial property of in situ TiO2 nanotube layers/titanium biocomposites

723

Microstructure and anti-oxidation behavior of laser clad Ni–20Cr coating on molybdenum surface

724

Microstructure and anti-oxidation properties of multi-composition ceramic coatings for carbon/carbon composites

725

Microstructure and anti-oxidation property of CrSi2–SiC coating for carbon/carbon composites

726

Microstructure and anti-oxidation property of mullite oxidation protective coating prepared by hydrothermal electrophoretic deposition for SiC–C/C composites

727

Microstructure and apatite-forming ability of the MAO-treated porous titanium

728

Microstructure and association property of hydrophobically modified polyacrylamide of a new family

729

Microstructure and bactericidal ability of photocatalytic TiO2 thin films prepared by rf helicon magnetron sputtering

730

Microstructure and barrier properties of PHBV/organoclays bionanocomposites

731

Microstructure and bending strength of 3Y-TZP ceramics by liquid-phase sintering with CAS addition

732

Microstructure and beta grain growth behavior of Ti–Mo alloys solution treated

733

Microstructure and bioaccessibility of different carotenoid species as affected by high pressure homogenisation: A case study on differently coloured tomatoes

734

Microstructure and bioactivity of Ca, P and Sr doped TiO2 coating formed on porous titanium by micro-arc oxidation

735

Microstructure and biocompatibility investigation of biomaterial alumina after 30 keV and 60 keV nitrogen ion implantation

736

Microstructure and bond strength of diffusion-bonded nickel aluminide–titanium joints

737

Microstructure and bond strength of HA(+ ZrO2 + Y2O3)/Ti6Al4V composite coatings fabricated by RF magnetron sputtering

738

Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate

739

Microstructure and bonding mechanism of Al/Ti bonded joint using Al–10Si–1Mg filler metal

740

Microstructure and bonding properties of diffusion–bonded composite comprising an Fe–Al alloy and carbon steel

741

Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer

742

Microstructure and bonding strength of WC reinforced Ni-base alloy brazed composite coating

743

Microstructure and boundary phases of Lu–Al-doped silicon nitride by pressureless sintering

744

Microstructure and catalytic activity of Li0.15Ni0.25Cu0.3Zn0.3O2−δ-Ce0.8Sm0.2O1.9-carbonate nanocomposite materials functioning as single component fuel cell

745

Microstructure and cathodic performance of La0.9Sr0.1MnO3 electrodes according to particle size of starting powder

746

Microstructure and cavitation erosion behavior of FeNiCrBSiNbW coating prepared by twin wires arc spraying process

747

Microstructure and cavitation erosion characteristics of Al–Si alloy coating prepared by electrospark deposition

748

Microstructure and cavitation–silt erosion behavior of high-velocity oxygen–fuel (HVOF) sprayed Cr3C2–NiCr coating

749

Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method

750

Microstructure and characteristics of interpenetrating β-TCP/Mg–Zn–Mn composite fabricated by suction casting

751

Microstructure and Characterization of a Highly Selective Catalyst for the Isomerization of Alkanes: A Molybdenum Oxycarbide

752

Microstructure and characterization of Al-doped ZnO films prepared by RF power sputtering on Al and ZnO targets

753

Microstructure and characterization of aluminum oxide thin films prepared by reactive RF magnetron sputtering on copper

754

Microstructure and characterization of La2O3 and CeO2 doped diamond-like carbon nanofilms

755

Microstructure and characterization of Ni-Co/Al2O3 composite coatings by pulse reversal electrodeposit

756

Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304L

757

Microstructure and Charpy impact properties of 12–14Cr oxide dispersion-strengthened ferritic steels

758

Microstructure and Charpy impact properties of ferrite–martensite dual phase API X70 linepipe steel

759

Microstructure and chemical analysis of PAN-based activated carbon fibers prepared by different activation methods

760

Microstructure and chemical composition of phases in Ti–48Al–2Cr–2Nb intermetallic alloy

761

Microstructure and chemical composition of primary teeth in children with Down syndrome and cerebral palsy

762

Microstructure and chemical composition of Thracian medallions with enamel in millefiori technique found in Bulgaria

763

Microstructure and chemical degradation of adobe and clay bricks

764

Microstructure and Chemical States of Hydroxyapatite/silk Fibroin Nanocomposites Synthesized via A Wet-mechanochemical Route

765

Microstructure and chemistry of Al–V–Fe–Si nanoquasicrystalline alloys

766

Microstructure and chemistry of Al–V–Fe–Si nanoquasicrystalline alloys

767

Microstructure and chemistry of the SAC/ENIG interconnections

768

Microstructure and cleanability of uncoated and fluoropolymer, zirconia and titania coated ceramic glazed surfaces

769

Microstructure and CO gas sensing property of Au/SnO2 core–shell structure nanoparticles synthesized by precipitation method and microwave-assisted hydrothermal synthesis method

770

Microstructure and coercivity mechanism of highly textured Nd-Fe-B films

771

Microstructure and coercivity variation in melt-spun Sm–Co–Fe–Zr ribbons

772

Microstructure and color of starch–gum films: Effect of gum deacetylation and additives. Part 2

773

Microstructure and composition analysis in plasma sprayed coatings of Al2O3/ZrSiO4 mixtures

774

Microstructure and composition analysis of nanostructured materials using HREM and FEG-TEM

775

Microstructure and composition of cast Ti–47Al–2Cr–2Nb alloys produced by yttria crucibles

776

Microstructure and composition of hybrid Pd-Nafion membranes

777

Microstructure and composition of pulse plated Re–Ni alloys on a rotating cylinder electrode

778

Microstructure and composition of pulse-plated metals and alloys

779

Microstructure and composition of TiC/a-C:H nanocomposite thin films deposited by a hybrid IPVD/PECVD process

780

Microstructure and composition of titanium nitride formed by ion beam enhanced nitrogen sorption of evaporated titanium under argon ion irradiation

781

Microstructure and composition of titanium nitride formed by ion beam enhanced nitrogen sorption of evaporated titanium under argon ion irradiation

782

Microstructure and compositional assignments of acrylamide/vinylidene chloride copolymers using one and two dimensional nuclear magnetic resonance spectroscopy

783

Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling

784

Microstructure and compression behaviour in the semisolid state of short-fibre-reinforced A356 aluminium alloys

785

Microstructure and compression behaviour in the semisolid state of short-fibre-reinforced A356 aluminium alloys

786

Microstructure and compressive behavior of Al-base amorphous/nanocrystalline alloys fabricated by powder forging

787

Microstructure and compressive properties of AlCrFeCoNi high entropy alloy

788

Microstructure and compressive properties of in situ synthesized Ti–Si alloy composites reinforced with La2O3 particles

789

Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100−x high-entropy alloys

790

Microstructure and compressive properties of carbon microballoons

791

Microstructure and continuous cooling transformation thermograms of spray formed GCr15 steel

792

Microstructure and continuous cooling transformation thermograms of spray formed GCr15 steel

793

Microstructure and corrosion behavior of AISI 316L duplex treated by means of ion nitriding and plasma based ion implantation and deposition

794

Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy

795

Microstructure and corrosion behavior of AZ31 alloys prepared by dual directional extrusion

796

Microstructure and corrosion behavior of cast Fe–B alloys dipped into liquid zinc bath

797

Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application

798

Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings

799

Microstructure and corrosion behavior of laser surface-melted high-speed steels

800

Microstructure and corrosion behavior of Mg–Zn–Ag alloys

801

Microstructure and corrosion behavior of micro-arc oxidation coating on 6061 aluminum alloy pre-treated by high-temperature oxidation

802

Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel

803

Microstructure and corrosion behavior of plasma electrolytic oxidation coated magnesium alloy pre-treated by laser surface melting

804

Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting

805

Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steels

806

Microstructure and corrosion behaviour in biological environments of the new forged low-Ni Co–Cr–Mo alloys

807

Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel

808

Microstructure and corrosion behaviour of gas tungsten arc welds of maraging steel

809

Microstructure and corrosion characteristics of Zr–1.5Nb–0.4Sn–0.2Fe–0.1Cr alloy with a β-annealing

810

Microstructure and corrosion performance of laser-annealed electroless Ni–W–P coatings

811

Microstructure and corrosion properties of diode laser melted friction stir weld of aluminum alloy 2024 T351

812

Microstructure and corrosion properties of laser surface processed aluminium alloys: a review

813

Microstructure and corrosion properties of laser surface processed aluminium alloys: a review

814

Microstructure and corrosion properties of plasma-sprayed NiCr–Cr3C2 coatings comparison with different post treatment

815

Microstructure and corrosion properties of thick WC composite coating formed by plasma cladding

816

Microstructure and corrosion properties of ultrafine-grained interstitial free steel

817

Microstructure and corrosion resistance behavior of ceramic coatings on biomedical NiTi alloy prepared by micro-arc oxidation

818

Microstructure and corrosion resistance of a chromium-free multi-elements complex coating on AZ91D magnesium alloy

819

Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidation

820

Microstructure and corrosion resistance of enamel coatings applied to smooth reinforcing steel

821

Microstructure and corrosion resistance of induction melted Fe-based alloy coating

822

Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al–Si powder

823

Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy

824

Microstructure and corrosion resistance of pure titanium surface modified by double-glow plasma surface alloying

825

Microstructure and corrosion resistance of simultaneous Al–Fe coating on copper by pack cementation

826

Microstructure and corrosion resistance of sintered NdFeB magnet modified by intergranular additions of MgO and ZnO

827

Microstructure and corrosion resistance of the layers formed on the surface of precipitation hardenable plastic mold steel by plasma-nitriding

828

Microstructure and creep behavior of an Y-α-β sialon composite

829

Microstructure and creep behavior of directionally solidified TiAl-base alloys

830

Microstructure and creep behavior of DMS4-type nickel based superalloy single crystals with orientations near 〈0 0 1〉 and 〈0 1 1〉

831

Microstructure and creep behavior of FGH95 nickel-base superalloy

832

Microstructure and creep behavior of the extruded Mg–4Y–4Sm–0.5Zr alloy

833

Microstructure and creep behavior of the rare-earth doped Mg–6Zn–3Cu cast alloy

834

Microstructure and creep behaviors of a high Nb-TiAl intermetallic compound based alloy

835

Microstructure and creep behaviour of magnesium hybrid composites

836

Microstructure and creep behaviour of Mg-12Gd-3Y-1Zn-0.4Zr alloy

837

Microstructure and creep characteristics of dissimilar T91/TP316H martensitic/austenitic welded joint with Ni-based weld metal

838

Microstructure and creep characteristics of Zn–3Cu–xAl ultra high-temperature lead-free solders

839

Microstructure and creep deformation of a near beta titanium alloy ‘β-CEZ’

840

Microstructure and creep deformation of a near beta titanium alloy ‘β-CEZ’

841

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

842

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

843

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

844

Microstructure and creep strength of fully-lamellar TiAl alloys containing beta-phase

845

Microstructure and creep strength of fully-lamellar TiAl alloys containing beta-phase

846

Microstructure and creep-recovery characteristics of achu (a taro based paste) made from freeze dried taro chips as affected by moisture content and variety Original Research Article

847

Microstructure and crystal structure of an equimolar Mg–Ti alloy processed by Simoloyer high-energy ball mill

848

Microstructure and crystallographic orientation relationship in directionally solidified Mg–Mg17Al12-eutectic

849

Microstructure and crystallographic orientation relationship in directionally solidified Mg–Mg17Al12-eutectic

850

Microstructure and crystallographic preferred orientation of polycrystalline microgarnet aggregates developed during progressive creep, recovery, and grain boundary sliding

851

Microstructure and Crystallographic Texture Characterization of Friction Stir Welded Thin AA2024 Aluminum Alloy

852

Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformation and annealing

853

Microstructure and crystallographic texture of an ultrafine grained C–Mn steel and their evolution during warm deformation and annealing Original Research Article

854

Microstructure and crystallographic texture of the chitin–protein network in the biological composite material of the exoskeleton of the lobster Homarus americanus

855

Microstructure and crystallography of borides and secondary precipitation in 18 wt.% Cr–4 wt.% Ni–1 wt.% Mo–3.5 wt.% B–0.27 wt.% C steel Original Research Article

856

Microstructure and crystallography of massive cementite layers on ferrite substrates Original Research Article

857

Microstructure and current–voltage characteristics of ZnO–V2O5–MnO2 varistor system

858

Microstructure and cyclic lifetime of Gd and Dy-containing EB-PVD TBCs deposited as single and double-layer on various bond coats

859

Microstructure and cyclic oxidation behavior of hot dip aluminized coating on Ni-base superalloy Inconel 718

860

Microstructure and cycling behavior of LiAl0.1Mn1.9O4 cathode for lithium secondary batteries at 3 V

861

Microstructure and cytotoxicity evaluation of duplex-treated silver-containing antibacterial TiO2 coatings

862

Microstructure and damage initiation in duplex stainless steels

863

Microstructure and damage initiation in duplex stainless steels

864

Microstructure and damping behaviour of consolidated magnesium chips

865

Microstructure and DC electrical conductivity of spinel nickel ferrite sintered in air and nitrogen atmospheres

866

Microstructure and defect characterization at interfaces in TiN/CrN multilayer coatings

867

Microstructure and defects of welds during production of water and gas pipes

868

Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate

869

Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation

870

Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation

871

Microstructure and deformation in the spray deposited Zn–22% Al alloy

872

Microstructure and deformation mechanism of 0 0 0 1 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings

873

Microstructure and deformation mechanisms in nanocrystalline Ni–Fe. Part I. Microstructure Original Research Article

874

Microstructure and deformation mechanisms in nanocrystalline Ni–Fe. Part II. In situ testing during X-ray diffraction Original Research Article

875

Microstructure and deformation mode of a stainless steel rupture disc exposed to sodium–water reaction

876

Microstructure and deformation of two-phase γ-titanium aluminides

877

Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering

878

Microstructure and deposition mechanism of CVD amorphous boron carbide coatings deposited on SiC substrates at low temperature

879

Microstructure and deuterium content of tokamak T-10 carbon erosion products

880

Microstructure and deuterium permeation resistance of the oxide scale prepared by initial oxidation method on vacuum solar receiver

881

Microstructure and dielectric characteristics of tungsten bronze structured SBN70 ceramics: effect of Nb2O5 content

882

Microstructure and dielectric properties control of Ba4(Nd0.7Sm0.3)9.33Ti18O54 microwave ceramics

883

Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3 thin films grown on super smooth glazed-Al2O3 ceramics substrate

884

Microstructure and dielectric properties of amorphous BaSm2Ti4O12 thin films for MIM capacitor

885

Microstructure and dielectric properties of Ba0.6Sr0.4TiO3–MgAl2O4 composite ceramics

886

Microstructure and dielectric properties of barium–strontium titanate with a functionally graded structure

887

Microstructure and dielectric properties of BaTiO3 ceramic doped with yttrium, magnesium, gallium and silicon for AC capacitor application

888

Microstructure and dielectric properties of BaxSr1−xTiO3 ceramics

889

Microstructure and dielectric properties of compositionally-graded (Ba1−xSrx)TiO3 thin films

890

Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics

891

Microstructure and dielectric properties of La2O3 doped amorphous SiO2 films as gate dielectric material

892

Microstructure and dielectric properties of La2O3 films prepared by ion beam assistant electron-beam evaporation

893

Microstructure and dielectric properties of low temperature sintered ZnNb2O6 microwave ceramics

894

Microstructure and dielectric properties of Pb0.94La0.06Nb2O6 ceramics

895

Microstructure and dielectric properties of PLZST ceramics prepared by a modified coprecipitation

896

Microstructure and dielectric properties of PMN–PT ceramics prepared by the molten salts method Original Research Article

897

Microstructure and dielectric properties of strontium barium niobate ceramics synthesized by partial coprecipitation

898

Microstructure and dielectric properties of the Ti-rich BaO–TiO2 thin films for microwave devices

899

Microstructure and dielectric properties of Zn3Nb2O8 ceramics prepared by a two-stage sintering method

900

Microstructure and dielectric response of (Ba,Sr)TiO3 filler-dispersed resin composites

901

Microstructure and discharge properties of Mg–Zr–O protective films in plasma display panel

902

Microstructure and dislocation analysis after creep deformation of die-cast Mg–Al–Sr (AJ) alloy

903

Microstructure and dispersion of Cu-TiCX master alloys into molten Cu and the relation to contact angle data

904

Microstructure and dry sliding wear behavior of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion

905

Microstructure and dry sliding wear behavior of Fe2TiSi /γ-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process

906

Microstructure and dry sliding wear behavior of hot-extruded AlSiCuPb bearing alloys

907

Microstructure and dry sliding wear behavior of laser clad Ni-based alloy coating with the addition of SiC

908

Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding

909

Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders

910

Microstructure and dry sliding wear resistance of a Cr13Ni5Si2 ternary metal silicide alloy Original Research Article

911

Microstructure and dry sliding wear resistance of CoTi intermetallic alloy

912

Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti–Ni–Si intermetallic composite coating

913

Microstructure and dry-sliding wear properties of TiC-reinforced composite coating prepared by plasma-transferred arc weld-surfacing process

914

Microstructure and dry-sliding wear resistance of laser clad tungsten reinforced W5Si3/W2Ni3Si intermetallic coatings

915

Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/g-Fe ceramal composite coating

916

Microstructure and ductile–brittle transition of as-cast Zr-based bulk glass alloys under compressive testing

917

Microstructure and ductile–brittle transition of as-cast Zr-based bulk glass alloys under compressive testing

918

Microstructure and durability of mortars modified with medium active blast furnace slag

919

Microstructure and dynamic tensile behavior of DP600 dual phase steel joint by laser welding

920

Microstructure and elastic modulus of mixed gels of gelatin + oxidized starch: Effect of pH

921

Microstructure and elastic modulus of phase-separated gelatin–starch hydrogels containing dispersed oil droplets

922

Microstructure and elastic properties of atomic layer deposited TiO2 anatase thin films Original Research Article

923

Microstructure and elastic properties of individual components of C/C composites Original Research Article

924

Microstructure and electric properties of lead-free 0.8Bi1/2Na1/2TiO3–0.2Bi1/2K1/2TiO3 ceramics

925

Microstructure and electric properties of strontium niobate ceramics

926

Microstructure and electrical characteristics of Cr–Si–Ni films deposited on glass and Si (1 0 0) substrates by RF magnetron sputtering

927

Microstructure and electrical characteristics of ZnO–B2O3–PbO–V2O5–MnO2 ceramics prepared from ZnO nanopowders

928

Microstructure and electrical characterization based on AFM of very high-doped polysilicon grains

929

Microstructure and electrical characterization of SixC1 − x/Al2O3 composite coatings for nuclear fusion applications

930

Microstructure and electrical conductivity of high volume Al2O3-reinforced copper matrix composites produced by plasma spray

931

Microstructure and electrical conductivity of LaNi0.6Fe0.4O3 prepared by combustion synthesis routes

932

Microstructure and electrical conductivity of Mo/TiN composite powder for alkali metal thermal to electric converter electrodes

933

Microstructure and electrical conductivity of nanocrystalline nickel- and nickel oxide/gadolinia-doped ceria thin films Original Research Article

934

Microstructure and electrical conductivity of Ni/YSZ and NiO/YSZ composites for high-temperature electrolysis prepared by mechanical alloying

935

Microstructure and electrical conductivity of NiO–YSZ nano-powder synthesized by aerosol flame deposition

936

Microstructure and electrical performance of eco-friendly thick film resistor compositions fired at different firing conditions

937

Microstructure and electrical properties in W/Nb co-doped Aurivillius phase Bi4Ti3O12 piezoelectric ceramics

938

Microstructure and electrical properties of (Ba0.85Ca0.15)1−xLix(Ti0.90Zr0.10)1−xNbxO3 ceramics with a low dielectric loss and a low sintering temperature

939

Microstructure and electrical properties of (Ba0.98Ca0.02)(Ti0.94Sn0.06)O3-modified Bi0.51Na0.50TiO3 lead-free ceramics

940

Microstructure and electrical properties of (Na0.5K0.5)1−2xMgxNbO3–Bi0.5Na0.5TiO3 lead-free piezoelectric ceramics

941

Microstructure and electrical properties of (Pb0.87Ba0.1La0.02)(Zr0.68Sn0.24Ti0.08)O3 anti-ferroelectric ceramics fabricated by the hot-press sintering method

942

Microstructure and electrical properties of (Zr, Sn)TiO4 thin film deposited on Si(1 0 0) using a sol–gel process

943

Microstructure and electrical properties of annealed tunneling magnetoresistive junctions with plasma oxidized insulation layer

944

Microstructure and electrical properties of antimony-doped tin oxide thin film deposited by sol–gel process

945

Microstructure and electrical properties of Ba0.5Sr0.5TiO3 thin films prepared on copper foils with La2O3 buffer layers

946

Microstructure and electrical properties of Ba1 − xSrxTiO3 thin films prepared by rf magnetron sputtering

947

Microstructure and electrical properties of BaTiO3/Cu ceramic composite sintered in nitrogen atmosphere

948

Microstructure and electrical properties of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–LiNbO3 lead-free piezoelectric ceramics Original Research Article

949

Microstructure and electrical properties of Bi2O3 excess Bi3.25La0.75Ti3O12 ferroelectric ceramics

950

Microstructure and electrical properties of Dy2O3-doped ZnO–Bi2O3 based varistor ceramics

951

Microstructure and Electrical Properties of Er2O3-Doped ZnO-Based Varistor Ceramics Prepared by High-Energy Ball Milling

952

Microstructure and electrical properties of iron oxide thin films deposited by spray pyrolysis

953

Microstructure and electrical properties of La2O3-doped Bi0.5(Na0.68K0.22Li0.1)0.5TiO3 lead-free piezoelectric ceramics

954

Microstructure and electrical properties of lead free potassium sodium niobate piezoceramics with nano ZnO additive

955

Microstructure and electrical properties of magnetic tunneling junction: NiFe/Co/Ta/Al-oxide/Co

956

Microstructure and electrical properties of magnetic tunneling junctions: Ta/NiFe/IrMn/M/Al-oxide/M/NiFe (M=Co, NiFe, CoFe)

957

Microstructure and electrical properties of Mn/Y codoped Ba0.67Sr0.33TiO3 ceramics

958

Microstructure and electrical properties of Mn-doped barium strontium titanate thin films prepared on copper foils

959

Microstructure and electrical properties of Na0.5Bi0.5(Ti0.98Zr0.02)O3 thin film deposited on indium tin oxide/glass substrate

960

Microstructure and electrical properties of Nb2O5 doped titanium dioxide

961

Microstructure and electrical properties of Ni1.0Mn2−xZrxO4 (0≤x≤1.0) negative temperature coefficient thermistors

962

Microstructure and electrical properties of niobium doped Bi4Ti3O12 layer-structured piezoelectric ceramics

963

Microstructure and electrical properties of PbZr Ti O 0.48 0.52 3 ferroelectric films on different Pt bottom electrodes

964

Microstructure and electrical properties of porous (Ba,Sr)TiO3 ceramics

965

Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents Original Research Article

966

Microstructure and electrical properties of porous Y1−xCaxFeO3 cathode materials by gelcasting process

967

Microstructure and electrical properties of Pr6O11–Co3O4–MnCO3–Y2O3-doped ZnO varistors

968

Microstructure and electrical properties of rare earth doped ZnO-based varistor ceramics

969

Microstructure and electrical properties of relaxor (1 − x)[(K0.5Na0.5)0.95Li0.05](Nb0.95Sb0.05)O3–xBaTiO3 piezoelectric ceramics

970

Microstructure and electrical properties of Sc2O3-doped ZnO–Bi2O3-based varistor ceramics

971

Microstructure and electrical properties of Si3N4–TiN composites sintered by hot pressing and spark plasma sintering

972

Microstructure and electrical properties of Sm2O3 doped Bi2O3-based ZnO varistor ceramics

973

Microstructure and electrical properties of Tb-doped zinc oxide-based ceramics

974

Microstructure and electrical properties of the composites based on SrTi0.5Fe0.5O3 − δ and Ce0.8(Sm0.8Sr0.2)0.2O2 − δ

975

Microstructure and electrical properties of the conductive Pt–LaNiO3 composite films deposited with co-sputtering

976

Microstructure and electrical properties of thin films of ReSi1.75 produced by co-sputtering

977

Microstructure and electrical properties of Ti–Si–C–Ag nanocomposite thin films

978

Microstructure and electrical properties of vanadium-doped zinc oxide-based non-ohmic resistors

979

Microstructure and electrical properties of Y2O3-doped ZnO–Pr6O11-based varistor ceramics

980

Microstructure and electrical properties of zirconia and composite nanostructured ceramics sintered by different methods

981

Microstructure and electrical properties of ZnO-based varistors prepared by high-energy ball milling

982

Microstructure and electrical properties of ZnO–Bi2O3-based varistor ceramics by different sintering processes

983

Microstructure and electrical properties of ZnO–ZrO2–Bi2O3–M3O4 (MCo, Mn) varistors

984

Microstructure and electrical transport in nano-grain sized Ce0.9Gd0.1O2−δ ceramics

985

Microstructure and electrical–optical properties of cesium tungsten oxides synthesized by solvothermal reaction followed by ammonia annealing

986

Microstructure and electrochemical behavior of a rapidly solidified V3TiNi0.56Hf0.24Mn0.15Cr0.1 hydrogen storage alloy

987

Microstructure and electrochemical behavior of Cr-added V2.1TiNi0.4Zr0.06Cr0.152 hydrogen storage electrode alloy

988

Microstructure and electrochemical behavior of laser cladded Fe-Cr-Mo-Si-N surface alloys on carbon steel

989

Microstructure and electrochemical behavior of laser cladded Fe-Cr-Mo-Si-N surface alloys on carbon steel

990

Microstructure and electrochemical behavior of laser treated FeCr and FeCrSiN surface alloyed layers on carbon steel

991

Microstructure and electrochemical behavior of laser treated FeCr and FeCrSiN surface alloyed layers on carbon steel

992

Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass

993

Microstructure and electrochemical characteristics of La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-x(V0.81Fe0.19)x hydrogen storage alloys

994

Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetallic alloys

995

Microstructure and electrochemical hydriding/dehydriding properties of ball-milled TiFe-based alloys

996

Microstructure and electrochemical hydrogen storage characteristics of (La0.7Mg0.3)1−xCexNi2.8Co0.5 (x = 0–0.20) electrode alloys

997

Microstructure and electrochemical hydrogen storage characteristics of La0.67Mg0.33−xCaxNi2.75Co0.25 (x = 0–0.15) electrode alloys

998

Microstructure and electrochemical investigations of La0.76−xCexMg0.24Ni3.15Co0.245Al0.105 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4) hydrogen storage alloys

999

Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials

1000

Microstructure and electrochemical performances of La0.7Mg0.3Ni2.55−xCo0.45Mx (M = Cu, Cr, Al; x = 0–0.4) hydrogen storage alloys prepared by casting and rapid quenching

بازگشت