<< مقالات لاتين >>
<< بر اساس عنوان >>
1
On the transversal number and VC-dimension of families of positive homothets of a convex body
2
On the transversal vibrations of a conveyor belt with a low and time-varying velocity. Part I: the string-like case
3
On the transversal vibrations of a conveyor belt with a low and time-varying velocity. Part II: the beam-like case
4
On the transversal vibrations of a conveyor belt: Applicability of simplified models
5
On the transversal vibrations of an axially moving continuum with a time-varying velocity: Transient from string to beam behavior
6
On the transverse shear modulus of negative Poissonʹs ratio honeycomb structures
7
On the transverse symbol of vectorial distributions and some applications to harmonic analysis
8
On the transverse vibrations of non-uniform beams with axial loads and elastically restrained ends
9
On the transverse vibrations of non-uniform beams with axial loads and elastically restrained ends
10
On the transverse vibrations of non-uniform beams with axial loads and elastically restrained ends
11
On the trapping of positrons by negatively charged vacancies
12
On the trapping of positrons by negatively charged vacancies
13
On the trapping of positrons by negatively charged vacancies
14
On the traveling salesman problem with a relaxed Monge matrix
15
On the travelling wave solutions of Ostrovsky equation
16
On the treatment of contact discontinuities using WENO schemes
17
On the treatment of energy loss in track fitting Original Research Article
18
On the treatment of finance-specific factors within the OLI paradigm
19
On the treatment of finite element structures in stochastic linear dynamics using a mode-based meta-model
20
On the treatment of fluid problems by methods of Clifford analysis Original Research Article
21
On the treatment of frictional contact in shell structures using variational inequalities
22
On the treatment of NN interaction effects in meson production in NN collisions
23
On the treatment of non-optimal regularization parameter influence on temperature distribution reconstruction accuracy in participating medium
24
On the treatment of open boundary condition for radiative transfer equation
25
On the treatment of scattering for three-dimensional temperature distribution reconstruction accuracy in participating medium
26
On the treatment of the Δ-contributions in electromagnetic pp-knockout reactions
27
On the treatment of uncertainties in structural mechanics and analysis
28
On the treatment of vesico-vaginal fistula
29
On the tree inclusion problem
30
On the tree number of regular graphs Original Research Article
31
On the tree-number of the power graph associated with some finite groups
32
On the Trees with Given Matching Number and the Modified First Zagreb Connection Index
33
On the tree-transformation power of XSLT
34
On the Tree-Width of Planar Graphs
35
On the trend to equilibrium for the Vlasov–Poisson–Boltzmann equation
36
On the trends in global circulation in 50 years of NCEP/NCAR reanalyses
37
On the trends in kinetic energies of secondary ions produced by polyatomic ion bombardment
38
On the Triality of the Hamming Code Vertex Operator Algebra
39
On the triangle inequalities in fuzzy metric spaces
40
On the triangle inequality in quasi 2-normed spaces and a new characterization of 2-inner product spaces
41
On the -triangle of generalised nonnesting partitions
42
On the triangle test with replications
43
On the triangle vertex Folkman numbers
44
On the tribochemical action of engine soot
45
On the tribological behavior of MoS2-coated thrust ball bearings operating under oscillating motion
46
On the tribological behaviour of mechanical seal face materials in dry line contact: Part I. Mechanical carbon
47
On the tribological behaviour of mechanical seal face materials in dry line contact: Part II. Bulk ceramics, diamond and diamond-like carbon films
48
On the tribology and micro-drilling performance of TiN/AlN nanolayer coatings
49
On the tribology and micro-drilling performance of TiN/AlN nanolayer coatings
50
On the tribology and micro-drilling performance of TiN/AlN nanolayer coatings
51
On the tribology and rheology of polymer brushes in good solvent conditions: a molecular dynamics study
52
On the tribology of the MAX phases and their composites during dry sliding: A review
53
On the tricritical point in MnSi under high pressures
54
On the triggers, resulting flow types and frequencies of subaqueous sediment density flows in different settings
55
On the Triple (Row, Column Diagonal) Confounded 2x2 Factorial 2-Series Designs.
56
On the triple-dipole dispersion energy for non-spherical molecules with an application to the O2O2O2 interaction Original Research Article
57
On the triplet state of poly(N-vinylcarbazole)
58
On the trivariate extreme value distributions
59
On the Triviality of (λ0φ4)d+1 in the Nonrelativistic and Lee Approximations
60
On the triviality of textbook quantum electrodynamics
61
On the trophic ecology of Gammaridea (Crustacea: Amphipoda) in coastal waters: A European-scale analysis of stable isotopes data
62
On the trough-to-peak ratio of drug effect in antihypertensive trials
63
On the truncated anisotropic long-range percolation on Z2
64
On the T-shaped structures of the benzene dimer
65
On the T-transitivity of kernels
66
On the Tubes of Exterior Algebras
67
On the Tukey depth of an atomic measure
68
On the tungsten carbide synthesis for PEM fuel cell application – Problems, challenges and advantages
69
On the Tuning of Predictive Controllers: The Minimum Back-Off Operating Point Selection Problem
70
On the tuning of variable piezoelectric transducer circuitry network for structural damage identification
71
On the tunneling dynamics of a cubic oscillator with a time-dependent harmonic frequency
72
On the Turán number for the hexagon
73
On the turbulence-controlled microprocesses in flotation machines
74
On the turbulent diffusion velocity in mixing layer simulated using the vortex method and the subgrid scale vorticity model
75
ON THE TURBULENT PRANDTL NUMBER IN STABLY STRATIFIED TURBULENCE BY SECOND ORDER MODELS
76
On the Turing degrees of minimal index sets
77
On the Turلn Number of Triple Systems
78
On the Tutte–Krushkal–Renardy polynomial for cell complexes
79
On the twin measure and queueing systems predictability
80
On the Twist of Abelian Varieties Defined by the Galois Extension of Prime Degree Original Research Article
81
On the Twist of Abelian Varieties Defined by the Galois Extension of Prime Degree Original Research Article
82
On the twist-2 and twist-3 contributions to the spin-dependent electroweak structure functions Original Research Article
83
On the twisted (2, 0) and little-string theories Original Research Article
84
On the twisted Alexander polynomial for metabelian representations into
85
On the twisted -homology of simple Lie groups
86
On the twisted product of Finsler manifolds
87
On the twisted q-Euler numbers and polynomials associated with basic q-l-functions
88
On the twistor space of pseudo-spheres
89
On the two conjectures of Graffiti Original Research Article
90
On the two first excited K = 0 bands in 238U and 240Pu
91
On the two largest -eigenvalues of graphs
92
On the two largest eigenvalues of trees Original Research Article
93
ON THE TWO PARAMETER HOMOTHETIC MOTIONS IN COMPLEX PLANE
94
On the two variable distance enumerator of the Shi hyperplane arrangement
95
On the Two-Architecture Connected Facility Location Problem
96
On the two-block H∞ problem for a class of unstable distributed systems Original Research Article
97
On the two-connected planar spanning subgraph polytope
98
On the two-degree-of-freedom Wiener–Hopf optimal design with tracking and disturbance rejection constraints
99
On the two-dimensional Knapsack Problem
100
On the two-dimensional Marcinkiewicz means with respect to Walsh–Kaczmarz system Original Research Article
101
On the Two-Dimensional Navier]Stokes Equations in Stream Function Form
102
On the two-dimensional orthogonal drawing of series-parallel graphs Original Research Article
103
On the Two-Dimensional Pointwise Dyadic Calculus Original Research Article
104
On the two-dimensional solution of both adhesive and non-adhesive contact problems involving functionally graded materials
105
On the two-dimensional stationary Schrِdinger equation with a singular potential
106
On the two-loop four-derivative quantum corrections in 4D N=2 superconformal field theories Original Research Article
107
On the two-loop sbottom corrections to the neutral Higgs boson masses in the MSSM Original Research Article
108
On the two-loop Yukawa corrections to the MSSM Higgs boson masses at large tanβ Original Research Article
109
On the two-parameter fractional Brownian motion and Stieltjes integrals for Hölder functions
110
On the two-quasineutron rotational band in 128Ba
111
On the two-quasineutron rotational band in 128Ba Original Research Article
112
On the two-sided group digraph with a normal adjacency matrix
113
On the two-wavelet localization operators on homogeneous spaces with relatively invariant measures
114
On the two-way shape memory behavior in NiTi alloy—An experimental analysis Original Research Article
115
On the Tychonoff\rq{}s type theorem via grills
116
On the tying of aid to tariff reform
117
On the type of conjugacy classes and the set of indices of maximal subgroups
118
On the type(s) of minimum size subspace partitions
119
On the types of instability of spatially restricted systems
120
On the typical case complexity of graph optimization Original Research Article
121
On the typical level crossing time and path
122
On the typology of auxiliary selection
123
On the Ubiquity of Fracture in Nonlinear Elasticity
124
On the ubiquity of K3 fibrations in string duality
125
On the ubiquity of matrix-product states in one-dimensional stochastic processes with boundary interactions
126
On the U–Cu–Al and U–Cu–Ga systems at 600 °C
127
On the Ulam stability of a quadratic set-valued functional equation
128
On the Ulam stability of an n-dimensional quadratic functional equation
129
On the Ulam stability of Jensen and Jensen type mappings on restricted domains
130
On the Ulam stability of mixed type mappings on restricted domains
131
On the Ulam stability of the Cauchy-Jensen equation and the additive-quadratic equation
132
On the ultimate behavior of the sequence of consecutive powers of a matrix in the max-plus algebra Original Research Article
133
On the ultimate independence ratio of a graph
134
On the ultimate lexicographic Hall-ratio
135
On the Ultimate Peano Derivative
136
On the ultimate transition to chaos in the dynamics of Cooperriderʹs bogie
137
On the ultimate value of local time of one-dimensional super-Brownian motion
138
On the Ultramean Construction
139
On the ultra-miniaturization of concentrator solar cells
140
On the ultrasonic assessment of adhesion between polymer coating and concrete substrate
141
On the umbrella model for supported vanadium oxide catalysts
142
On the UMD constants for a class of iterated Lp(Lq) spaces
143
On the Unbounded Behavior for Some Non-autonomous Systems in Banach Spaces
144
On the unbounded divergence in the best approximation on equidistant nodes
145
On the unboundedness of a class of Fourier integral operators on
146
On the uncertain variable structure systems with bounded controllers
147
On the uncertainties in the measurement of absolute (true) TEC over Indian equatorial and low latitude sectors Original Research Article
148
On the uncertainties in validating satellite instantaneous rainfall estimates with raingauge operational network
149
On the uncertainties of decentralized controllers in a transfer production line
150
On the uncertainty in activity measurements for samples containing “hot particles”
151
On the uncertainty in long-term predictions of wave induced loads on ships
152
On the uncertainty in the current waveform measurement of an ESD generator
153
On the uncertainty of building acoustic measurements – Case study of a cross-laminated timber construction
154
On the uncertainty of Cantorian geometry and the two-slit experiment
155
On the unconditional strong law of large numbers for the bootstrap mean
156
On the unconditional subsequence property
157
On the uncontrollable damped triple inverted pendulum
158
On the Undecidability of Implications between Embedded Multivalued Database Dependencies
159
On the undecidability of logics with converse, nominals, recursion and counting
160
On the undecidability of logics with converse, nominals, recursion and counting Original Research Article
161
On the undecidability of probabilistic planning and related stochastic optimization problems Original Research Article
162
On the Undecidability of Second-Order Unification
163
On the Underestimation of Auditory Verbal Learning Impairments in Temporal Lobe Epilepsy
164
On the Underfitting and Overfitting Sets of Models Chosen by Order Selection Criteria
165
On the understanding of the remarkable activity of template-containing mesoporous molecular sieves in the transesterification of rapeseed oil with ethanol
166
On the undervaluation of privatized companies
167
On the undetected error probability for binary codes
168
On the uneven evolution of human know-how
169
On the uniaxial compression behavior of regular shaped cellular metals
170
On the unicity of the Kato decomposition
171
On the unification of all fundamental forces in a fundamentally fuzzy Cantorian ε(∞) manifold and high energy particle physics
172
On the unification of heterotic strings, M theory and theory
173
On the Unification of Mind and Matter
174
On the unification of the fundamental forces and complex time in the space
175
On the unification of thermal perception and adaptive actions
176
On the unification of two families of multiple twisted type polynomials by using p-adic q-integral at
177
On the unified approach to anisotropic and isotropic elasticity for singularity, interface and crack in dissimilar media
178
On the Uniform Approximation of a Class of Analytic Functions by Bruwier Series Original Research Article
179
On the uniform approximation of discrete-time systems by generalized Fourier series
180
On the Uniform Approximation of Laplace′s Prior by t-Priors in Location Problems
181
On the uniform asymptotic stability for a linear integro-differential equation of Volterra type
182
On the uniform bound of solutions for the KP-type equations Original Research Article
183
On the uniform convergence of sine integrals
184
On the uniform convergence of the Chebyshev interpolants for solitons Original Research Article
185
On the uniform decay for the Korteweg-de Vries equation with weak damping
186
On the Uniform Distribution in Residue Classes of Dense Sets of Integers with Distinct Sums Original Research Article
187
On the uniform edge-partition of a tree Original Research Article
188
On the uniform elongation of cast Al–7%Si–0.6%Mg (A357) alloys
189
On the uniform ergodicity of Markov processes of order 2.
190
On the uniform exponential stability of a wide class of linear time-delay systems
191
On the Uniform Integrability of the Radon–Nikodym Densities for Wiener Measure
192
On the uniforming of the atomization process for inorganic and organic mercury in graphite furnace atomic absorption spectrometry
193
On the uniforming of the atomization process for inorganic and organic mercury in graphite furnace atomic absorption spectrometry
194
On the uniformity of cardiopulmonary exercise testing in chronic heart failure
195
On the uniformity of distribution of the decryption exponent in fixed encryption exponent RSA
196
On the Uniformity of Distribution of the Elliptic Curve ElGamal Signature
197
On the Uniformity of Distribution of the Naor–Reingold Pseudo-Random Function
198
On the uniformity of investment banking spreads: the seven percent solution is not unique
199
On the uniformity of stresses inside an inhomogeneity of arbitrary shape
200
On the uniformization of lattice-valued frames
201
On the unimodality and combinatorics of Bessel numbers Original Research Article
202
ON THE UNIMODALITY OF INDEPENDENCE POLYNOMIAL OF CERTAIN CLASSES OF GRAPHS
203
On the unimodality of independence polynomials of some graphs
204
On the unimodality of the manufacturerʹs objective function in the newsvendor model
205
On the union of simply connected planar sets
206
On the unique behavior of molar excess enthalpies for the supercritical fluid mixtures
207
On the unique features of post-disaster humanitarian logistics
208
On the unique features of post-disaster humanitarian logistics
209
On the unique mapping relationship between initial and final quantum states Original Research Article
210
On the unique representability of spikes over prime fields
211
On the unique solvability of a direct dynamics problem for mechanisms with redundant constraints and Coulomb friction in joints
212
On the Unique Solvability of a Nonlinear Functional Evolution Equation
213
On the Unique Solvability of a Nonlinear Reaction-Diffusion Model with Convection
214
On the uniqueness and analyticity of solutions in micropolar thermoviscoelasticity
215
On the uniqueness and continuous data dependence of solutions in the theory of swelling porous thermoelastic soils
216
ON THE UNIQUENESS AND CONTINUOUS DEPENDENCE OF SOLUTIONS IN DYNAMICAL THERMOELASTICITY BACKWARD IN TIME
217
On the uniqueness and non-uniqueness of the positive -eigenvector for transition probability tensors
218
On the uniqueness and reconstruction for an inverse problem of the fractional diffusion process
219
On the uniqueness and regularity of the Primitive Equations imposing additional anisotropic regularity Original Research Article
220
On the uniqueness and sensitivity of indentation testing of isotropic materials
221
On the uniqueness and spatial behaviour of anti-plane shear deformations of swelling porous elastic soils backward in time
222
On the uniqueness and structure of solutions to a coupled elliptic system
223
On the uniqueness of a rate-independent plasticity model for single crystals
224
On the uniqueness of a solution of a two-phase free boundary problem
225
On the Uniqueness of a Spherically Symmetric Speed of Sound from Transmission Eigenvalues
226
On the uniqueness of bivariant Chern class and bivariant Riemann–Roch transformations
227
On the uniqueness of decomposition into Cartesian product of curves
228
On the uniqueness of discontinuous solutions to the Degasperis–Procesi equation
229
On the Uniqueness of Equilibrium in Cournot Oligopoly and Other Games
230
On the uniqueness of Euclidean distance matrix completions
231
On the uniqueness of Euclidean distance matrix completions: the case of points in general position Original Research Article
232
On the uniqueness of extensions of ω
233
On the uniqueness of L1-continuation after blowup
234
On the uniqueness of Lyapunov matrices for a time-delay system
235
On the uniqueness of maximizers of Markov–Gaussian processes
236
On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials
237
On the uniqueness of meromorphic functions that share four values in one angular domain
238
On the Uniqueness of Multidimensional Traveling Fronts of Some Semilinear Equations
239
On the Uniqueness of Near Polygons with Three Points on Every Line
240
On the Uniqueness of Non-locally Finite Invariant Measures on a Topological Group
241
On the uniqueness of optimal prices set by monopolistic sellers
242
On the uniqueness of overcomplete dictionaries, and a practical way to retrieve them
243
On the uniqueness of positive solution of an elliptic equation Original Research Article
244
On the uniqueness of positive solutions for quasilinear elliptic equations Original Research Article
245
On the uniqueness of quantitative DNA difference descriptors in 2D graphical representation models
246
On the uniqueness of stable marriage matchings
247
On the uniqueness of strong solution to the incompressible Navier–Stokes equations with damping
248
On the uniqueness of strongly flat covers of cyclic acts
249
On the uniqueness of surgery
250
On the uniqueness of the coincidence index on orientable differentiable manifolds
251
On the uniqueness of the effective Lagrangian for N = 2 SQCD Original Research Article
252
On the Uniqueness of the Leech Lattice
253
On the uniqueness of the maximum likelihood estimator
254
On the uniqueness of the maximum of the paths of random walks
255
On the uniqueness of the positive solution for a second-order integral boundary value problem with switched nonlinearity
256
On the uniqueness of the representation of a convex polygon by its Hough transform
257
On the Uniqueness of the Schwarzian and Linearisation by Nonlocal Contact Transformation
258
On the uniqueness of the shape of a penetrable, anisotropic obstacle
259
On the uniqueness of the solution of an evolution free boundary problem in theory of lubrication Original Research Article
260
On the uniqueness of the twisted representation in the Z2 orbifold construction of a conformal field theory from a lattice Original Research Article
261
On the Uniqueness of the Unbounded Classical Solutions of the Navier-Stokes and Associated Equations
262
On the uniqueness of weak solutions for the 3D viscous magneto-hydrodynamic equations Original Research Article
263
On the Uniqueness Problem for Dirichlet Operators
264
On the uniqueness problems of entire functions and their derivatives ✩
265
On the uniqueness problems of meromorphic functions and their linear differential polynomials
266
On the uniqueness theorems of meromorphic functions with weighted sharing of three values
267
On the uniqueness theory of algebroid functions in some proper domain
268
On the unitarity of gauged non-compact world-sheet supersymmetric WZNW models Original Research Article
269
On the unitarity of gauged non-compact WZNW strings Original Research Article
270
On the unitarity problem in space/time noncommutative theories
271
On the unitarity triangles of the CKM matrix
272
On the unitary diagonalisation of a special class of quaternion matrices
273
On the unitary equivalence of absolutely continuous parts of self-adjoint extensions
274
On the Unitary Systems Affiliated with Orthonormal Wavelet Theory inn-Dimensions
275
On the Units of Algebraic Number Fields Original Research Article
276
On the units of geographical economics
277
On the unity of duality
278
On the univalence of an integral operator
279
On the univalence of an integral operator defined by Hadamard product
280
On the univalence of the log-biharmonic mappings
281
On the univalent solution of PDE u = f between spherical annuli
282
On the universal aerodynamic relations following from the newtonian theory
283
On the universal behavior of sorption isotherms in disordered mesoporous solids
284
On the universal behavior of two-dimensional Ising spin glasses
285
On the universal coefficients formula for shape homology
286
On the Universal Curve in Superplasticity Mechanics
287
On the Universal Embedding of Dual Polar Spaces of Type Sp2n(2)
288
On the universal embedding of the near hexagon related to the extended ternary Golay code
289
On the Universal Embedding of the Sp2n(2) Dual Polar Space
290
On the Universal Embedding of the U2n(2) Dual Polar Space
291
On the universal Grِbner bases of toric ideals of graphs
292
On the Universal Interpolating Sequences on H2(B)
293
On the universal model for medium-range order in amorphous metal structures
294
On the universal property of Pimsner–Toeplitz -algebras and their continuous analogues
295
On the universal representation of the scattering matrix of affine Toda field theory Original Research Article
296
On the universal stellar law for extrasolar systems
297
On the universality class of all universality classes and E-infinity spacetime physics
298
On the universality class of certain string theory hadrons Original Research Article
299
On the universality class of monopole percolation in scalar QED
300
On the universality class of the 3d Ising model with long-range-correlated disorder
301
On the universality of derived functions of the Riemann zeta-function Original Research Article
302
On the universality of face: evidence from chinese compliment response behavior
303
On the universality of language comprehension strategies: Evidence from Turkish
304
On the universality of multipliers on image Original Research Article
305
On the universality of quark-antiquark interactions in the independent quark model
306
On the universality of rank distributions of website popularity
307
On the universality of recursion
308
On the Universality of Small-World Graphs
309
On the universality of the dissipation rate functional form and of the autocorrelation function exponential form
310
On the universality of the leading, 1Q power corrections in QCD
311
On the universality of the x and A dependence of the EMC effect and its relation to parton distributions in nuclei
312
On the universeʹs missing mass
313
On the unlinking conjecture of independent polynomial functions
314
On the unmixing of MEx/OMEGA hyperspectral data
315
On the unstable discrete spectrum of the linearized 2-D Euler equations in bounded domains
316
On the unsteady forces during the motion of a sedimenting particle
317
On the unsteady motion of two-dimensional sails
318
On the unsteady Navier–Stokes equations in a time-moving domain with velocity-pressure boundary conditions Original Research Article
319
On the unsteady unidirectional flows generated by impulsive motion of a boundary or sudden application of a pressure gradient
320
On the unsymmetrical deformation and reverse snapping of a spinning non-flat disk
321
On the unusual characteristics of the diamonds from Letšeng-la-Terae kimberlites, Lesotho
322
On the unusual solvent retention and the effect on the gas transport in perfluorinated Hyflon AD® membranes
323
On the upper and lower limits of peak current of first return strokes in negative lightning flashes
324
On the Upper Bound of Eigenvalues for Elliptic Equations with Higher Orders
325
On the upper bound of the number of modes of a multivariate normal mixture
326
On the upper chromatic number of (v3,b2)-configurations Original Research Article
327
On the upper chromatic numbers of the reals Original Research Article
328
On the upper exponent of a finite p-group
329
On the upper limit of thermal conductivity GaN crystals
330
On the upper semicontinuity of Choquet capacities Original Research Article
331
On the upper semi-continuity of the Hilbert–Kunz multiplicity
332
On the upper tail of Italian firms’ size distribution
333
On the upper truncated Weibull distribution and its reliability implications
334
On the upper truncated Weibull distribution and its reliability implications
335
On the upsurge of foreign exchange reserves in India
336
On the uptake and release of zinc (65Zn) in the growing alga Selenastrum capricornutum Printz Original Research Article
337
On the Urbach rule in non-crystalline solids
338
On the Urbach rule in sulphur-implanted Cu6PS5I superionic conductors Original Research Article
339
On the urbanization of poverty
340
On the usage of acoustic properties combined with an artificial neural network – A new approach of determining presence of dairy fouling Original Research Article
341
On the usage of ostracods (Crustacea) as bioindicator species in different aquatic habitats in the Bolu region, Turkey
342
On the use (and misuse?) of the Edinburgh Handedness Inventory
343
On the use and usefulness of fuzzy sets in medical AI
344
On the use of (TMS)3CH as novel tin-free radical reducing agent
345
On the use of 1-butene double-bond isomerization as a probe reaction on cesium-loaded zeolite X Original Research Article
346
On the use of 2-(trimethylsilyl)iodobenzene as a benzyne precursor
347
On the use of 225Ra as yield tracer and Ba(Ra)SO4 microprecipitation in 226Ra determination by α-spectrometry
348
On the use of 2D correlation and exchange NMR spectroscopy in organic porous materials
349
On the use of 2-D moment invariants for the automated classification of particle shapes Original Research Article
350
On the use of 3-D TEM cells for total radiated power measurements
351
On the use of a class of interior point algorithms in stochastic structural optimization
352
On the use of a component mode synthesis technique to investigate the effects of elastic boundary conditions on the transmission loss of baffled plates
353
On the use of a domain-specific modeling language in the development of multiagent systems
354
On the use of a domain-specific modeling language in the development of multiagent systems
355
On the use of a Hessian model function in molecular geometry optimizations
356
On the Use of a Heterogeneous MIMD–SIMD Platform to Simulate the Dynamics of Globular Clusters with a Central Massive Object
357
On the use of a high order overlapping grid method for coupling in CFD/CAA
358
On the use of a highly reactive iron ore in Chemical Looping Combustion of different coals
359
On the use of a high-redox potential laccase as an alternative for the transformation of non-steroidal anti-inflammatory drugs (NSAIDs)
360
On the use of a homogenization technique for the modeling of anisotropic magnetic material properties in a finite element analysis
361
On the use of a joint spatial-frequency representation for the fusion of multi-focus images
362
On the use of a laboratory-scale Pelton wheel water turbine in renewable energy education
363
On the use of a linear interpolation method in the measurement procedure of a seven-hole pressure probe
364
On the use of a low-Reynolds extension to the Chen–Kim (k–ε) model to predict thermal exchanges in the case of an impinging plasma jet
365
On the use of a minimal path approach for target trajectory analysis
366
On the use of a Modified Latin Hypercube Sampling (MLHS) method in the estimation of a Mixed Logit Model for vehicle choice
367
On the use of a modified Shapley value to determine the optimal size of a cartel
368
On the use of a monitoring system for fatigue usage calculations
369
On the use of a new cell to model geometric asymmetry of metallic foams
370
On the use of a non-thermal plasma reactor for ethanol steam reforming
371
On the use of a O2:SF6 plasma treatment on GaAs processed surfaces for molecular beam epitaxial regrowth
372
On the use of a patient-specific rapid-prototyped model to simulate the response of the human head to impact and comparison with analytical and finite element models
373
On the Use of A Priori Information for Sparse Signal Approximations
374
On the use of a real time application interface under Linux in the electrochemistry laboratory. Application to chronopotentiometry
375
On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations
376
On the use of a reduced model for the simulation of melting of solutions in DSC experiments
377
On the Use of a Reflective Architecture to Augment Database Management Systems
378
On the use of a self organising map as feature compressor in the building of calibration models: Application to FTIR-spectrophotometry
379
On the use of a simplified model for switched reluctance motors
380
On the use of a small synthetic calibration set for the simultaneous spectrophotometric multivariate determination of Ca2+ and Mg2+ in groundwater: chemical and spectral considerations Original Research Article
381
On the use of a stochastic estimator learning algorithm to the ATM routing problem: a methodology
382
On the use of a sub-scale thermomechanical simulator to obtain accurate tensile properties of (α + β)- and β-processed Ti–6Al–4V
383
On the use of a tabulation approach to model auto-ignition during flame propagation in SI engines
384
On the use of a uniformly valid analytical cascade response function for fan broadband noise predictions
385
On the use of abiotic surrogates to describe marine benthic biodiversity
386
On the use of accumulative roll bonding process to develop nanostructured aluminum alloy 5083
387
On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
388
On the use of adaptive gridding methods for modelling chemical transport from multi-scale sources
389
On the use of adaptive grouping protocols under asymmetric bursty traffic
390
On the use of adaptive updating rules for actuator and sensor fault diagnosis
391
On the use of aggregation operations in information fusion processes
392
On the use of Ajisai and Jason-1 satellites for tests of general relativity
393
On the use of ammonia electrolysis for hydrogen production
394
On the use of ammoniacal/ammonium thiosulphate for gold extraction from a concentrate
395
On the use of amplitude shaping pulses as windows for harmonic analysis
396
On the use of an analytical cascade response function to predict sound transmission through an annular cascade
397
On the use of an elastica-slider assembly as a bistable device
398
On the use of an enhanced transverse shear strain shell element for problems involving large rotations
399
On the use of an SPSA-based model-free controller in quality improvement
400
On the use of an SPSA-based model-free feedback controller in active noise control for periodic disturbances in a duct
401
On the use of analytical solutions to design pumping tests in leaky aquifers connected to a stream
402
On the use of Anderson–Grüneisen parameters in calculation of the temperature derivative of elastic moduli for cubic polycrystals
403
On the use of anomeric hydroxylamines in the reverse-Cope cyclisation
404
On the use of antithetic variates in particle transport problems
405
On the use of apparent activity (Aapp) for treatment planning of 125I and 103Pd interstitial brachytherapy sources: Recommendations of the American Association of Physicists in Medicine Radiation Therapy Committee Subcommittee on Low-Energy Brachytherapy
406
On the use of apparent activity (Aapp) for treatment planning of 125I and 103Pd interstitial brachytherapy sources: Recommendations of the American Association of Physicists in Medicine Radiation Therapy Committee Subcommittee on Low-Energy Brachytherapy
407
On the use of apparent hydraulic diffusivity as an indicator of connectivity
408
On the use of artificial excitation in operational transfer path analysis
409
On the use of artificial intelligence tools for fracture forecast in cold forming operations
410
On the use of atomic force microscopy for structural mapping of metallic-glass thin films
411
On the use of autarkies for satisfiability decision
412
On the use of auxiliary systems during thermal spraying
413
On the use of back propagation and radial basis function neural networks in surface roughness prediction
414
On the use of backward adaptation in a perceptual audio coder
415
On the use of Bader’s atomic charges for the evaluation of charge transfers between ground and excited states
416
On the use of base isolation for the protection of rigid bodies placed on a multi-storey frame under seismic excitation
417
On the use of bastnasite ore as a phosphor material
418
On the use of Bayesian belief networks for the prediction of software productivity
419
On the use of Bernoulli mixture models for text classification
420
On the use of bioclimatic architecture principles in order to improve thermal comfort conditions in outdoor spaces
421
On the use of biorthogonal interpolating wavelets for large-eddy simulation of turbulence
422
On the use of biplot analysis for multivariate bibliometric and scientific indicators
423
On the use of bipolar montages for time-series analysis of intracranial electroencephalograms
424
On the use of bone and skin markers in kinematics research
425
On the use of Boolean methods for the computation of the stability number Original Research Article
426
On the use of boronates in the Petasis reaction
427
On the use of Boussinesq approximation in turbulent supersonic jet modeling
428
On the use of Brazilian disc specimen for calculating mixed mode I–II fracture toughness of rock materials
429
On the use of bubble functions in the local buckling analysis of plate structures by the spline finite strip method
430
On the Use of Calibration Explosions at the Former Semipalatinsk Test Site for Compiling a Travel-time Model of the Crust and Upper Mantle
431
On the use of capillary electrophoresis for the determination of inorganic anions and cations, and carbohydrates in residues collected after a simulated suicide bombing attack
432
On the use of characteristic variables in viscoelastic flow problems
433
On the use of Charpy transition temperature as reference temperature for the choice of a pipe steel
434
On the use of Chemical Geothermometry: A Reactive Transport Modeling Study of the Dixie Valley Geothermal Area
435
On the use of classical configurations as subcritical bubbles
436
On the use of coefficient of variation for uncertainty analysis in fault tree analysis
437
On the use of colloid-enhanced ultrafiltration in view of enantiomeric enrichments and limiting conditions
438
ON THE USE OF COLOR IMAGING IN EXPERIMENTAL APPLICATIONS
439
On the use of combinatory chemistry to the design of new luminescent Eu3+ complexes
440
On the use of combined geophysical methods to assess water content and water conductivity of near-surface formations
441
On the use of compact polarimetry SAR for ship detection
442
On the use of complex SAR image spectral analysis for target detection: assessment of polarimetry
443
On the use of computational intelligence in the optimal shape control of functionally graded smart plates Original Research Article
444
On the use of computer assisted resolution of non-separable peaks in a congener specific polybrominated diphenyl ether capillary gas chromatographic analysis
445
On the use of conceptual reconstruction for mining massively incomplete data sets
446
On the use of conceptual research for psychosomatic medicine in a world of rapid cultural change
447
On the use of confirmatory factor analysis in personality research
448
On the use of conformal transformations to calculate the eigenvalues of the Helmholtz equation for cylinders with polygonal cross section
449
On the use of consistent approximations in boundary element-based shape optimization in the presence of uncertainty Original Research Article
450
On the use of constraints in least squares estimation and control
451
On the use of construct reliability in MIS research: a meta-analysis
452
On the use of contact factor parameter to optimize drying operations
453
On the use of corrected cohesion energies in model computations of transition metal properties: The case of Pt–Rh cluster compositional structures
454
On the use of correlated beta random variables with animal population modelling
455
On the use of correlated beta random variables with animal population modelling
456
On the use of counterpropagation artificial neural networks to characterize Italian rice varieties
457
On the use of counterpropagation artificial neural networks to characterize Italian rice varieties Original Research Article
458
On the Use of Covariates in Bridging Single- and Multiple-Race Categories
459
On the use of critical distance theories for the prediction of the high cycle fatigue limit stress in notched Ti–6Al–4V
460
On the use of cross-validation for time series predictor evaluation
461
On the use of Csanady’s formulae in a turbulent gas–solid channel flow
462
On the use of CsK2Sb photocathodes in RF linacs
463
On the use of current control scheme for switched-capacitor DC/DCconverters
464
On the use of current meter data to assess the realism of ocean model simulations
465
On the use of current sensors for the control of power converters
466
On the use of cyanine dyes as low-bandgap materials in bulk heterojunction photovoltaic devices
467
On the use of data filtering techniques for credit risk prediction with instance-based models
468
On the use of data from distributed measurement systems for correlating voltage transients to lightning
469
On the use of decision tree induction for discovery of interactions in a photolithographic process
470
On the use of density kernels for concentration estimations within particle and puff dispersion models
471
On the use of departure function correlations for hydrocarbon isobaric liquid phase heat capacity calculation
472
On the use of descriptors arising from the conceptual density functional theory for the prediction of chemicals explosibility
473
On the use of deuterium isotope effects in chemical synthesis
474
On the use of diagonal control versus decoupling for ill-conditioned processes
475
On the Use of Diary Study to Investigate Avoidance Strategy in Spoken English Courses
476
On the use of different hydrocolloids as electrospun adhesive interlayers to enhance the barrier properties of polyhydroxyalkanoates of interest in fully renewable food packaging concepts
477
On the use of different loss functions in statistical pattern recognition applied to machine translation
478
On the use of different types of knowledge in metaheuristics based on constructing solutions
479
On the use of different types of knowledge in metaheuristics based on constructing solutions
480
On the use of digital staircase ramps for linear sweep voltammetry at microdisc electrodes: Large step potentials significantly broaden and shift voltammetric peaks
481
ON THE USE OF DIMENSION AND LACUNARITY FOR COMPARING THE RESONANT BEHAVIOR OF CONVOLUTED WIRE ANTENNAS
482
On the use of dimension reduction techniques in quasi-Monte Carlo methods
483
On the use of dimensional analysis to predict swelling strain
484
On the use of discontinuous elastomer patches to optimize the damping properties of composite sandwich plates
485
On the use of dispersed nanoparticles modified with single layer β-cyclodextrin as chiral selecor to enhance enantioseparation of clenbuterol with capillary electrophoresis
486
On the use of DME in gas turbines
487
On the use of donor-derived iNKT cells for adoptive immunotherapy to prevent leukemia recurrence in pediatric recipients of HLA haploidentical HSCT for hematological malignancies
488
On the use of dynamic feedback in knowledge base system design
489
On the use of dynamic fluorescence measurements to determine equilibrium and kinetic constants. The inclusion of pyrene in β-cyclodextrin cavities
490
On the use of dynamic mechanical thermal analysis (DMTA) for measuring glass transition temperature of polymer matrix fibre reinforced composites
491
On the use of edible coatings to monitor osmotic dehydration kinetics for minimal solids uptake Original Research Article
492
On the use of effective properties for the fracture analysis of microstructured materials
493
On the use of electrical conductance measurements for the stability of oil-in-water Pickering emulsions
494
On the use of electrochemical techniques to monitor free oxide content in molten fluoride media
495
On the use of electrokinetics for unraveling charging and structure of soft planar polymer films
496
On the use of electronic corpora for theoretical linguistics: Case studies from the syntax of German
497
On the Use of Electrooculogram for Efficient Human Computer Interfaces
498
On the use of element-free Galerkin Method for problems involving incompressibility
499
On the use of embedded discontinuity elements with crack path continuity for mode-I and mixed-mode fracture
500
On the use of EMG-ratios to assess the coordination of back muscles
501
On the Use of Endosteal Layers and Medullary Bone from Domestic Fowl in Archaeozoological Studies
502
On the Use of Enumeration for Investigating the Performance of Hypothesis Tests for Economic Models with a Discrete Response Variable
503
On the use of ethanol for evaluating microporosity of activated carbons prepared from Polish lignite
504
On the use of ethanol in the processing of biodiesel fuels
505
On the use of Ethephon as abscising agent in cv. Crimson Seedless table grape production: Combination of Fruit Detachment Force, Fruit Drop and metabolomics
506
On the use of evaporation dynamics to characterize phase transitions in van der Waals clusters: investigations in aniline–(argon)n up to n=15 Original Research Article
507
On the use of Factorized Distribution Algorithms for problems defined on graphs
508
ON THE USE OF FFT ALGORITHM FOR THE CIRCUMFERENTIAL CO-ORDINATE IN BOUNDARY ELEMENT FORMULATION OF AXISYMMETRIC PROBLEMS
509
On the use of field measurements of energy fluxes to evaluate land surface models
510
On the use of field measurements of energy fluxes to evaluate land surface models
511
On the use of flexural wave propagation experiments for identification of complex modulus
512
On the use of fluidized bed catalytic reactors where reduction and oxidation zones are present simultaneously
513
On the Use of Fluorescent Probes to Estimate Free Mg2+in the Matrix of Heart Mitochondria
514
On the use of flux limiters in the discrete ordinates method for 3D radiation calculations in absorbing and scattering media
515
On the use of fractal geometry methods for the wear process characterization
516
On the use of fractional calculus for the probabilistic characterization of random variables
517
On the Use of Fractional Polynomial Models to Assess Preventive Aspect of Variables: An Example in Prevention of Mortality Following HIV Infection
518
On the use of fungicides in ecological seed burial studies
519
On the use of Ga–In eutectic and halogen light source for testing P3HT–PCBM organic solar cells
520
On the use of general symmetry-projected Hartree–Fock–Bogoliubov configurations in variational approaches to the nuclear many-body problem
521
On the Use of Generalized Additive Models in Time-Series Studies of Air Pollution and Health
522
On the use of generalized Hamilton׳s principle for the derivation of the equation of motion of a pipe conveying fluid
523
On the use of generalized linear models following a sequential design
524
On the use of genetic algorithms for response surface modeling in high-performance liquid chromatography and their combination with the Microsoft Solver
525
On the use of genetic algorithms to solve location problems
526
On the use of geometrically exact shells in a conserving framework for flexible multibody dynamics
527
On the use of geometry design variables in the MDO analysis of wing structures with aeroelastic constraints on stability and response
528
On the use of graph parsing for recognition of isolated hand postures of Polish Sign Language
529
On the use of ground penetrating radar for detecting and reducing crevasse-hazard in Dronning Maud Land, Antarctica
530
On the use of growth rate parameters for projecting population sizes: Application to aphids
531
On the use of growth rate parameters for projecting population sizes: Application to aphids
532
On the use of Hadamard expansions in hyperasymptotic evaluation of Laplace-type integrals. I: real variable
533
On the use of Hadamard expansions in hyperasymptotic evaluation of Laplace-type integrals: II. complex variable
534
On the use of Hadamard expansions in hyperasymptotic evaluation of Laplace-type integrals—III: Clusters of saddle points
535
On the use of Hadamard expansions in hyperasymptotic evaluation of Laplace-type integrals—IV: Poles
536
On the use of Hadamard weightings in the partial decoupling of H∞ based designs
537
On the use of Hamacher’s t-norms family for information aggregation
538
On the use of harmonic Ritz pairs in approximating internal eigenpairs Original Research Article
539
On the use of headline indices to link environmental quality and income at the level of the nation state
540
On the use of heat pipe principle for the exploitation of medium–low temperature geothermal resources
541
On the use of heat transfer correlations for internal surfaces in the ASTEC code
542
On the use of Heronian means in a similarity classifier
543
On the use of high order difference methods for the system of one space second order nonlinear hyperbolic equations with variable coefficients
544
On the Use of Higher-Order Finite-Difference Schemes on Curvilinear and Deforming Meshes
545
On the use of higher-order formula for numerical derivatives in scientific computing Original Research Article
546
On the use of high-frequency broadband sonar to classify biological scattering layers from a cabled observatory in Saanich Inlet, British Columbia
547
On the use of high-frequency economic information to anticipate the current quarter GDP: A study case for Mexico
548
On the Use of Historical Control Information for Trend Test in Carcinogenesis
549
On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming
550
On the use of homotopy analysis method for solving unsteady MHD flow of Maxwellian fluids above impulsively stretching sheets
551
On the use of human data in assessing effects on human health: the case of perchlorate
552
On the use of hydrogen in confined spaces: Results from the internal project InsHyde
553
On the use of hyperbolic function to describe fatigue S-N curve
554
On the use of immersed boundary methods for shock/obstacle interactions
555
ON THE USE OF IMPROVED IMAGING TECHNIQUES FOR THE DEVELOPMENT OF A MULTISTATIC THREE-DIMENSIONAL MILLIMETER-WAVE PORTAL FOR PERSONNEL SCREENING
556
On the use of inadequate airline data in mappings of a global urban system
557
On the use of incomplete sensitivities for feedback control of laminar vortex shedding
558
On the use of industrial scraps for the treatment of zinc hydrometallurgical wastes by self-propagating reactions
559
On the use of inexact subdomain solvers for BDDC algorithms Original Research Article
560
On the use of information criteria in analytic hierarchy process
561
On the use of information retrieval techniques for the automatic construction of hypertext
562
On the use of information theory for detecting upper limb motor dysfunction: An application to Parkinson’s disease
563
On the use of infrared thermography for the analysis of fatigue damage processes in welded joints
564
On the use of infrared thermography in studies with air curtain devices
565
On the use of intensity optical pumping and coherent population trapping techniques in the implementation of atomic frequency standards
566
On the use of interval arithmetic in geometric branch and bound algorithms
567
On the use of intrinsic fluorescence emission ratio in the characterization of hydraulic oil degradation
568
On the use of ion beams for the selection of radioactive waste matrices
569
On the use of ionic liquid capillary columns for analysis of aromatic hydrocarbons in low-boiling petrochemical products by one-dimensional and comprehensive two-dimensional gas chromatography
570
On the use of ionospheric scintillation indices as input to receiver tracking models Original Research Article
571
On the use of IPCC-class models to assess the impact of climate on Living Marine Resources
572
On the use of iron radio-isotopes to study iron speciation kinetics in seawater: A column separation and off-line counting approach
573
On the Use of Issue Tracking Annotations for Improving Developer ActivityMetrics
574
On the use of kernel structure for blind equalization
575
On the use of laboratory ocean circulation models to simulate mesoscale (10–100 km) spreading
576
On the use of lattice Boltzmann model for simulating dean flow of non-Newtonian fluids in curved square ducts
577
On the use of lead as a neutron filter
578
On the use of lead/tin alloys as target material for the production of spallation neutrons
579
On the use of lead/tin alloys as target material for the production of spallation neutrons
580
On the use of learning automata in medium access control of single-hop lightwave networks
581
On the use of lightweight mortars for the minimization of impact sound transmission
582
On the use of limited autonomous mobility for dynamic coverage maintenance in sensor networks
583
On the use of linear camera-object interaction models in visual servoing
584
On the use of linear models in the estimation of the size of a population using capture–recapture data
585
On the use of linear stability model to characterize the morphological behaviour of a double bar system. Application to Truc Vert beach (France)
586
On the use of linear-elastic local stresses to design load-carrying fillet-welded steel joints against static loading
587
On the use of linearized pseudo-second-order kinetic equations for modeling adsorption systems Original Research Article
588
On the use of linguistic consistency in systems for human-computer dialogues
589
On the use of liquid metals as cathode in molten fluorides
590
On the use of local optimizations within Metropolis–Hastings updates
591
On the use of logarithmic transformations in allometric analyses
592
On the use of low-price guarantees to discourage price cutting
593
On the use of low-rank coals in electricity generation
594
On the use of Lyapunov criteria to analyze the convergence of blind deconvolution algorithms
595
On the use of Lyapunov function methods in renewal theory
596
On the use of Makrofol KG to study fission fragment angular distributions
597
On the use of Makrofol KG to study fission fragment angular distributions
598
On the use of market prices to evaluate medical treatments
599
On the use of matrix functions for fractional partial differential equations Original Research Article
600
On the use of mercury as a means of locating background sources in ultra low-background HPGe-detector systems
601
On the use of metacognitive strategies by Iranian EFL learners in doing various reading tasks across different proficiency levels
602
On the use of metal nanoparticles for enhancement of light absorption in dye-sensitized solar cells
603
On the use of meteorological data to assess the evaporation from a bare soil
604
On the use of methylimidazolium acetate ionic liquids as solvent and stabilizer in the synthesis of cobalt nanoparticles by chemical reduction method
605
On the use of micro thermal analysis to characterize compatibility of nitrile rubber blends
606
On the use of microjets to suppress turbulence in a Mach 0.9 axisymmetric jet
607
On the use of microphone arrays to visualize spatial sound field information
608
On the use of Monte Carlo perturbation in neutron transport problems
609
On the use of Morse index and rotation numbers for multiplicity results of resonant BVPs
610
On the use of multi neighbourhood structures within a Tabu-based memetic approach to university timetabling problems
611
On the use of multi-agent systems for the monitoring of industrial systems
612
On the use of multiaxial fatigue criteria for fretting fatigue life assessment
613
On the use of multijet-multistage impactors
614
On the use of multi-loop circle criterion for saturating control synthesis
615
On the use of multi-objective evolutionary algorithms for survival analysis
616
On the use of multi-objective evolutionary algorithms for the induction of fuzzy classification rule systems
617
On the use of multi-parameter free energy relationships: the rearrangement of (Z)-arylhydrazones of 5-amino-3-benzoyl-1,2,4-oxadiazole into (2-aryl-5-phenyl-2H-1,2,3-triazol-4-yl)ureas
618
On the Use of Multiple Hops in Next Generation Wireless Systems
619
On the use of multiple quasi-static mode compensation sets for component mode synthesis of complex structures
620
On the use of multiple sinks to extend the lifetime in connected wireless sensor networks
621
On the use of multi-species NK models to explore ecosystem development
622
On the use of multi-species NK models to explore ecosystem development
623
On the use of multivariable piecewise-linear models for predicting human response to anesthesia
624
On the use of nanoliposomes as soft templates for controlled nucleation and growth of hydroxyapatite nanocrystals under hydrothermal conditions
625
On the use of natural coordinates in optimal synthesis of mechanisms
626
On the use of NDT data for reliability-based assessment of existing timber structures
627
On the use of NDVI for estimating rainfall fields in the Kalahari of Botswana
628
On the use of nearest feature line for speaker identification
629
On the use of negation in Boolean IR queries
630
On the use of negative penalty parameters in aeroelastic divergence analysis of lifting surfaces
631
On the use of neighbourhood-based non-parametric classifiers
632
On the use of NeQuick topside option in IRI-2007 Original Research Article
633
On the use of neural networks to evaluate groundwater levels in fractured media
634
On the Use of Neuropsychology to Diagnose Brain Damage and Study Brain-Behavior Relationships: A Comment on Luria
635
On the use of new oxidized Co–Cr–Pt–O catalysts for vertically-aligned few-walled carbon nanotube forest synthesis in electron cyclotron resonance chemical vapor deposition
636
On the use of NiO as sintering additive for BaCe0,9Y0,1O3 − α
637
On the use of noble gases and binary mixtures as reactor coolants and CBC working fluids
638
On the use of noble metals modifiers for simultaneous determination of As, Sb and Se by electrothermal atomic absorption spectrometry
639
On the use of nominal stresses to predict the fatigue strength of welded joints under biaxial cyclic loading
640
On the use of non-coherent fault trees in safety and security studies
641
On the use of non-coherent fault trees in safety and security studies
642
On the use of non-linear finite element analysis in deformation evaluation and development of design charts for extrusion processes
643
On the Use of Nonparametric Curves in Phase I Trials with Low Toxicity Tolerance
644
On the Use of Nonparametric Regression in Assessing Parametric Regression Models
645
On the use of nuclear magnetic resonance to characterize vertical two-phase bubbly flows
646
On the use of observability measures for sensor location in tubular reactor
647
On the use of ocean color remote sensing to measure the transport of dissolved organic carbon by the Mississippi River Plume
648
On the Use of Offline Short Tests for Scoring and Classifying Purposes
649
On the use of one bit quantizers in networked control
650
On the use of on-line detection for maintenance of gradually deteriorating systems
651
On the use of on-line detection for maintenance of gradually deteriorating systems
652
On the use of order statistics for improved detection of signals by the MDL criterion
653
On the use of organic ionic plastic crystals in all solid-state lithium metal batteries
654
On the use of orthogonal polynomials in the study of anisotropic plates
655
On the use of out-of-band signaling in ad hoc wireless networks
656
On the use of packet classes in communication networks to enhance congestion pricing based on marks
657
On the use of Pade approximants in the estimation of eigenfrequencies and damping ratios of a vibrating system
658
On the use of PAH molecular diagnostic ratios in sewage sludge for the understanding of the PAH sources. Is this use appropriate?
659
On the use of panel data in stochastic frontier models with improper priors
660
On the use of partial confounding for the construction of alternative regular two-level blocked fractional factorial designs
661
On the use of particle swarm optimization and Kernel density estimator in concurrent negotiations
662
On the use of particle swarm optimization for adaptive resource allocation in orthogonal frequency division multiple access systems with proportional rate constraints
663
On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste
664
On the use of pediatric phantoms in the dose evaluation during computed tomography (CT) thorax examinations
665
On the use of perforations to improve the sound absorption of porous materials
666
On the use of periodic photothermal methods for materials diagnosis
667
On the use of phosphine-free PdCl2(SEt2)2 complex as catalyst precursor for the Heck reaction
668
On the use of photothermal methods for thermal characterization of sedimentary rocks from the Paranل Basin in Brazil
669
On the use of piecewise linear wavelets for fast construction of sparsified moment matrices in solving the thin-wire EFIE
670
On the use of plastic energy to establish strength requirements in ductile structures
671
On the use of PLS and N-PLS in MIA-QSAR: Azole antifungals
672
On the use of POD-based ROMs to analyze bifurcations in some dissipative systems
673
On the use of policy to reduce housing market segmentation
674
On the use of polycapillary structures to improve laboratory Energy-Dispersive X-ray Diffractometry and Reflectometry
675
On the use of polycapillary structures to improve laboratory Energy-Dispersive X-ray Diffractometry and Reflectometry
676
On the use of porous inclusions to improve the acoustical response of porous materials: Analytical model and experimental verification
677
On the use of posterior regret -minimax actions to obtain credibility premiums
678
On the use of power series solution method in the crack analysis of brittle materials by indirect boundary element method
679
On the use of PRD and CR parameters for ECG compression
680
On the use of principal component analysis (PCA) for evaluating interannual vegetation anomalies from SPOT/VEGETATION NDVI temporal series
681
On the use of principal component analysis (PCA) for evaluating interannual vegetation anomalies from SPOT/VEGETATION NDVI temporal series
682
On the use of prior and posterior information in the subpixel proportion problem
683
On the Use of Prior Knowledge in Normalization Schemes for Speaker Verification
684
On the use of Prony method to locate faults in loop systems by utilizing modal parameters of fault current
685
On the use of prophylactic antibiotics in prevention of toxic shock syndrome
686
On the use of pseudo-forces to consider initial conditions in 3D time- and frequency-domain acoustic analysis Original Research Article
687
On the use of quadrupole mass spectrometric detection for flow modulated comprehensive two-dimensional gas chromatography
688
On the use of quartic force fields in variational calculations
689
On the use of quasi-dynamic modeling for composite material structures: Analysis of adhesively bonded joints with midplane asymmetry and transverse shear deformation
690
On the use of quasi-likelihood for estimation in hidden-Markov random fields
691
On the use of radial basis functions in the solution of elliptic boundary value problems
692
On the use of radioisotopes to study the possible synthesis by magnetron sputtering of bimetallic nanoparticles
693
On the use of random walks to estimate correlation in fitness landscapes
694
On the use of ranked set sampling for estimating super-population total: Gamma population model
695
On the use of rational-function fitting methods for the solution of 2D Laplace boundary-value problems
696
On the use of reachability Gramians for the stabilization of linear periodic systems
697
On the use of recycled tire rubber to develop low E-modulus ECC for durable concrete repairs
698
On the use of reduced active space in CASSCF calculations
699
On the use of reduced models obtained through identification for feedback optimal control problems in a heat convection–diffusion problem
700
On the use of regional climate models: Implications of climate change for viticulture in Serbia
701
On the use of registers in achieving wait-free consensus
702
On the use of regression and verbal protocol analysis in modeling analystsʹ behavior in an unstructured task environment: A methodological note
703
On the use of regression techniques for the analysis of single case aphasic data
704
On the use of RELAP5-3D as a subchannel analysis code Original Research Article
705
On the use of Remes multiple exchange algorithm for linear-phase FIR filters with general specifications
706
On the use of remote sensing techniques for monitoring spatio-temporal soil organic carbon dynamics in agricultural systems
707
On the Use of Response Spectral-Reference Data for the Selection and Ranking of Ground-Motion Models for Seismic-Hazard Analysis in Regions of Moderate Seismicity: The Case of Rock Motion
708
On the use of response surface methodology to predict and interpret the preferred c-axis orientation of sputtered AlN thin films
709
On the use of risk acceptance criteria in the offshore oil and gas industry
710
On the use of risk acceptance criteria in the offshore oil and gas industry
711
On the use of risk and decision analysis to support decision-making
712
On the use of risk and decision analysis to support decision-making
713
On the use of RMS values in power quality assessment
714
On the use of S(α,β) tables for nuclides with well pronounced resonances
715
ON THE USE OF SACCHAROSE ESTERS IN THE PREPARATION OF O/W EMULSIONS WITH LIQUID CRYSTALS
716
On the use of sample entropy to analyze human postural sway data
717
On the use of sample indices to reflect changes in benthic fauna biodiversity
718
On the use of sampling statistics to advance bibliometrics
719
On the use of sampling weights when estimating regression models with survey data
720
On the use of scaling matrices for task-specific robot design
721
On the use of scanning electron microscopy for the modelling of co-grinding kinetics in a tumbling ball mill
722
On the use of secondary structure in protein structure prediction: a bioinformatic analysis
723
On the use of seismic data to monitor the injection of CO2 into a layered aquifer
724
On the use of sensitivity functions to design dead-beat control algorithm
725
On the use of shape functions in the cell centered finite volume formulation for plate bending analysis based on Mindlin–Reissner plate theory
726
On the use of silicon as thermal neutron filter
727
On the use of similarity metrics for approximate graph matching
728
On the use of simulated experiments in designing tests for material characterization from full-field measurements
729
On the use of single-film models to describe the oxy-fuel combustion of pulverized coal char
730
On the use of singular perturbations to neglect the dynamic saliency of synchronous machines
731
On the use of SLS Tools in Sheet Metal Stamping
732
On the use of sodium hexametaphosphate to extract spores of arbuscular mycorrhizal fungi from soil
733
On the use of sodium hexametaphosphate to extract spores of arbuscular mycorrhizal fungi from soil
734
On the use of soil hydraulic conductivity functions in the field
735
On the use of soil hydraulic conductivity functions in the field
736
On the use of solid phase ion exchangers for isolation of amino acids from liquid samples and their enantioselective gas chromatographic analysis
737
On the use of Somiglianaʹs formula and Fourier series for elasticity problems with circular boundaries
738
On the use of Somiglianaʹs formulae and series of surface spherical harmonics for elasticity problems with spherical boundaries
739
On the use of space–time finite elements in the solution of elasto-dynamic problems with strain discontinuities Original Research Article
740
On the use of species-area curves to detect the effects of sample size
741
On the use of spray systems: An example of R&D work in hydrogen safety for nuclear applications
742
On the use of spring models to analyse the lateral-torsional buckling behaviour of cracked beams
743
On the use of standard DRK isotherms in Dubinin’s t/F method Original Research Article
744
On the use of state constraints in optimal control of singular PDEs
745
On the use of stationary versus hidden Markov models to detect simple versus complex ecological dynamics
746
On the use of stationary versus hidden Markov models to detect simple versus complex ecological dynamics
747
On the use of statistical methods to interpret electrical resistivity data from the Eumsung basin (Cretaceous), Korea
748
On the use of statistical models to predict crop yield responses to climate change
749
On the use of steady-state signal equations for 2D TrueFISP imaging
750
On the use of stereolithography built photoelastic models for stress analysis investigations
751
On the use of strong discontinuity formulations for the modeling of preferential moisture uptake in fractured porous media
752
On the use of structural equation models for marketing modeling
753
On the use of student data in efficiency analysis—Technical efficiency in Swedish upper secondary school
754
On the use of succinic anhydride as acylating agent for practical resolution of aryl–alkyl alcohols through lipase-catalyzed acylation
755
On the use of sunspace for space heating/cooling in Europe
756
On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures
757
On the use of supervised features for unsupervised image categorization: An evaluation
758
On the use of supported ceria membranes for oxyfuel process/syngas production
759
On the use of surface interpolation techniques in generalised finite volume strategies for simulating transport in highly anisotropic porous media
760
On the use of surface neutron-gamma gauges to estimate soil water content
761
On the use of survival analysis techniques to estimate medical care costs
762
On the Use of Symbolic Analyzers in Circuit Synthesis
763
On the use of tandem allylic acetate isomerisation and ring-closing metathesis with palladium(0) phosphine complexes and ruthenium benzylidenes as orthogonal catalysts
764
On the Use of t-Distributed Stochastic Neighbor Embedding for Data Visualization and Classification of Individuals with Parkinson’s Disease
765
On the use of the advanced very high resolution radiometer for development of prognostic land surface phenology models
766
On the use of the advanced very high resolution radiometer for development of prognostic land surface phenology models
767
On the use of the analytic hierarchy process in the aggregation of expert judgments
768
On the use of the asymptotic forms of the boolean matrix for designing cellular manufacturing systems — An improved approach
769
On the use of the auto-bispectral density for detecting quadratic nonlinearity in structural systems
770
On the use of the autocorrelation function to identify the damage in the side shell of a shipʹs hull
771
On the use of the average chord length
772
On the use of the Balancing Method for calculating component RAW involving CCFs in SSC categorization
773
On the use of the Balancing Method for calculating component RAW involving CCFs in SSC categorization
774
On the use of the BLYP functional for the DFT calculation of graphite–hydrogen systems
775
On the use of the bootstrap for estimating functions with functional data
776
On the use of the Choquet integral with fuzzy numbers in multiple criteria decision support
777
On the Use of the Complex Method in the Study of a Vortex Free Boundary Problem
778
On the use of the complexity index as a measure of complexity in activity networks
779
On the use of the conjugate gradient method for the solution of the neutron transport equation
780
On the use of the constant phase element to understand variation in grain boundary properties
781
On the use of the crack tip opening angle parameter to explain the ductile crack growth behavior of miniature compact specimens
782
On the use of the cyclic power spectrum in rolling element bearings diagnostics
783
ON THE USE OF THE DEGENERATE PLATE AND THE ABSOLUTE NODAL CO-ORDINATE FORMULATIONS IN MULTIBODY SYSTEM APPLICATIONS
784
On the use of the diffusive wave for modelling extreme flood events with overbank flow in the floodplain
785
On the use of the dual-frequency ENVISAT altimeter to determine snowpack properties of the Antarctic ice sheet
786
On the use of the EC3 and AISI specifications to estimate the ultimate load of CFRP-strengthened cold-formed steel lipped channel columns
787
On the use of the Equivalent Material Concept to predict tensile load-bearing capacity of ductile steel bolts containing V-shaped threads
788
On the use of the FLAIR technique to improve the correction of eddy current induced artefacts in MR diffusion tensor imaging
789
ON THE USE OF THE GAUSS FILTER IN MODAL PARAMETER ESTIMATION
790
On the use of the geometric approach to global stability for three dimensional ODE systems: A bilinear case
791
On the use of the geometric mean approximation in estimating the effective hygro-elastic behavior of fiber-reinforced composites
792
On the use of the hybrid causal logic method in offshore risk analysis
793
On the use of the hybrid causal logic method in offshore risk analysis
794
On the use of the Hα spectral line to determine the electron density in a microwave (2.45 GHz) plasma torch at atmospheric pressure
795
On the use of the Hα spectral line to determine the electron density in a microwave (2.45 GHz) plasma torch at atmospheric pressure
796
On the Use of the Inflation Tax When Nondistortionary Taxes Are Available
797
On the Use of the Inverse Electrocardiogram Leads
798
On the use of the k– model in commercial CFD software to model the neutral atmospheric boundary layer
799
On the Use of the Lazard Correspondence in the Classification of p-Groups of Maximal Class,
800
On the use of the maximum likelihood estimation for analysis of vibrato tones
801
On the use of the micromarker technique for studying the growth mechanism of thin oxide films Original Research Article
802
On the use of the modified Julia olefination for bryostatin synthesis
803
On the use of the multivariate autoregressive and relative power contribution models for determination of transient root cause Original Research Article
804
On the use of the Murakamiʹs zig-zag function in the modeling of layered plates and shells
805
On the use of the NCEP/NCAR surface winds for modeling barotropic circulation in the Río de la Plata Estuary
806
On the use of the non direct tensile loading on a classical split Hopkinson bar apparatus dedicated to sheet metal specimen characterisation
807
On the use of the overlapping area matrix for image segmentation evaluation: A survey and new performance measures
808
On the use of the peaks over thresholds method for estimating out-of-sample quantiles
809
On the use of the peaks over thresholds method for estimating out-of-sample quantiles
810
On the use of the polynomial annihilation edge detection for locating cracks in beam-like structures
811
On the use of the Price equation
812
On the use of the pulsed-convection approach for modelling advection-diffusion in chaotic flows—A prototypical example and direct numerical simulations
813
On the use of the residue theorem for the efficient evaluation of band-averaged input power into linear second-order dynamic systems
814
On the use of the resting potential and level set methods for identifying ischemic heart disease: An inverse problem
815
ON THE USE OF THE STRIP-YIELD MODEL TO PREDICT FATIGUE CRACK GROWTH UNDER IRREGULAR LOADING
816
On the use of the term diast ma in ancient Greek constructions
817
On the use of the Theory of Critical Distances and the Modified Wöhler Curve Method to estimate fretting fatigue strength of cylindrical contacts
818
On the use of the Theory of Critical Distances to predict static failures in ductile metallic materials containing different geometrical features
819
ON THE USE OF THE TOTAL INCARCERATION VARIABLE IN SENTENCING RESEARCH
820
On the Use of the Transient Hot-Strip Method for Measuring the Thermal Conductivity of High-Conducting Thin Bars
821
On the use of the Trigonometric Ritz method for general vibration analysis of rectangular Kirchhoff plates
822
On the Use of the Water Hammer Equations with Time Dependent Friction during a Valve Closure, for Discharge Estimation
823
On the use of the wave distribution function concept to determine the directions of arrivals of radar echoes
824
On the use of the Webb–Pearman–Leuning theory for closed-path eddy correlation measurements
825
On the use of the Weibull and the normal cumulative probability models in structural design
826
On the use of the Weibull model to describe thermal inactivation of microbial vegetative cells
827
On the use of theoretical tools in the study of photophysical properties of the new Eu(fod)3 complex with diphenbipy
828
On the use of thermal NF3 as the fluorination and oxidation agent in treatment of used nuclear fuels
829
On the use of three level orthogonal arrays in robust parameter design
830
On the use of three-dimensional h- and p-version finite elements in solving vibration response problems
831
On the use of time-domain reflectometry for full-wave electromagnetic optimization of nonuniform waveguides
832
On the use of time-resolved particle image velocimetry for the investigation of rod–airfoil aeroacoustics
833
On the use of tin–lithium alloys as breeder material for blankets of fusion power plants
834
On the use of trace additions of Sn to enhance sintered 2xxx series Al powder alloys
835
On the use of trace additions of Sn to enhance sintered 2xxx series Al powder alloys
836
On the use of transcendence as an apologia strategy: The case of Johnson controls and its fetal protection policy
837
On the use of transformed auxiliary variables in estimating population mean by using two auxiliary variables
838
On the use of transmissibility measurements for finite element model updating
839
On the use of transverse shear stress homogeneous and non-homogeneous conditions in third-order orthotropic plate theory
840
On the use of triethylamine hydroiodide as a supporting electrolyte in dye-sensitized solar cells
841
On the use of two L1 norm minimization methods in geodetic networks
842
On the use of two-photon absorption for determination of femtosecond pump–probe cross-correlation functions
843
On the use of ultrasonic spectral analysis for the characterization of artificially degraded API 5L X52 steel pipeline welded joints
844
On the Use of UML for Modeling Mechatronic Systems
845
On the use of uncertainty analyses to test hypotheses regarding deterministic model predictions of environmental processes
846
On the use of uncertainty importance measures in reliability and risk analysis
847
On the use of uncertainty importance measures in reliability and risk analysis
848
On the use of universal relations in the modeling of transversely isotropic materials
849
On the use of UV photo-oxidation for the determination of total nitrogen in rainwater and water-extracted atmospheric aerosol
850
On the use of variable bending stiffness clothoidal strips for the analysis and synthesis of low variability torque-angle turned curves in spiral torsion springs
851
On the use of variance reducing multipliers in Monte Carlo computations of a global sensitivity index Original Research Article
852
On the use of variance reduction techniques when comparing simulation systems at the steady state
853
On the use of variational inequalities to model impact problems of elasto–plastic media
854
On the use of varying die angle for improving the resistance to hydrogen embrittlement of cold drawn prestressing steel wires
855
On the use of verb-based implicit causality in sentence comprehension: Evidence from self-paced reading and eye tracking
856
On the use of voltammetric methods to determine electrochemical stability limits for lithium battery electrolytes
857
On the use of volume maps in the conformational analysis of vitamin D analogs
858
On the use of water phantom images to calibrate and correct eddy current induced artefacts in MR diffusion tensor imaging
859
On the use of weighting matrices to improve harmonic balance parameter identification results
860
On the use of wind energy to power reverse osmosis desalination plant: A case study from Ténès (Algeria)
861
On the use of WLF equation to study resin curing by dielectric spectroscopy
862
On the use of Woods metal for fabricating and testing polymeric organic solar cells: An easy and fast method
863
On the use of words and fuzzy sets,
864
ON THE USE OF WORLDVIEW -2 IMAGE AND FEATURE EXTRACTION TECHNIQUE FOR RICE FIELDS MONITORING IN EGYPT
865
On the use of XFEM within the Arlequin framework for the simulation of crack propagation
866
On the use of X-ray and γ-ray telescopes for identifying the origin of electrons and positrons observed by ATIC, Fermi, and PAMELA
867
On the use of X-ray powder diffraction for determining low levels of chrysotile asbestos in gypsum-based bulk materials: use of a synchrotron source
868
On the use of zinc for gold cementation from ammoniacal–thiosulphate solutions
869
On the use of Z-scan fluorescence correlation experiments on giant unilamellar vesicles
870
On the use of ΔQ° rather than T°ΔS° in the calculation of ΔG° accompanying the oxidation or fermentation of catabolic substrates of biological importance in their standard states
871
On the use temperature parameterized rate coefficients in the estimation of non-equilibrium reaction rates
872
On the useful role of OH free radicals in differentiation of cultured human fibroblasts
873
On the usefulness of a duplicating mirror to evaluate self-absorption effects in laser induced breakdown spectroscopy
874
On the usefulness of a duplicating mirror to evaluate self-absorption effects in laser induced breakdown spectroscopy
875
On the usefulness of atmospheric and oceanic angular momentum in recovering polar motion and gravity field variations in a unified process Original Research Article
876
On the usefulness of carbon isotopic exchange for the operando analysis of metal–carbonyl bands by IR over ceria-containing catalysts
877
On the usefulness of overparameterized ecological models
878
On the usefulness of overparameterized ecological models
879
On the Usefulness of Pre-processing Methods in Rotating Machines Faults Classification using Artificial Neural Network
880
On the usefulness of the counterpoise method on hydrogen-bonded complexes: a numerical test using near complete basis sets on H2O … HF, (H2O)2, (HF) 2 and CH4…H2O
881
On the user cost and homeownership
882
On the uses of corporate governance provisions
883
On the uses of sarcastic irony
884
On the uses of special crack tip elements in numerical rock fracture mechanics
885
On the Using of Gaussian Dispersion Model in Estimating the Concentration of Air Pollutants
886
On the using of modal curves for radar waveforms classification
887
On the uth geometric conditional quantile
888
On the Utility of E-Learning in Statistics
889
On the utility of lognormal distributions in the analysis of electrochemical systems
890
On the utility of operational precipitation forecasts to served as input for streamflow forecasting
891
On the utility of radium isotopes as tracers of hydrocarbon discharge
892
On the utility of spectroscopic imaging as a tool for generating geometrically accurate MR images and parameter maps in the presence of field inhomogeneities and chemical shift effects
893
On the Utility of the Signal Detection Model of the Remember–Know Paradigm
894
On the utilization of heavy concrete for radiation shielding
895
On the utilization of high Z materials as a plasma facing component
896
On the Utilization of ID-based Connected Dominating Sets for Mobile Ad hoc Networks
897
On the utilization of power function for the description of fatigue test results
898
On the utilization of waste vegetable oils (WVO) as agglomerants to recover coal from coal fines cleaning wastes (CFCW)
899
On the UV photodissociation dynamics of hydrogen iodide Original Research Article
900
On the UV spectrum of cross-conjugated 2,3-diphenyl-1,3-butadiene
901
On the U-WPF Acts over Monoids
902
On the vacua of image gauged supergravity in 4 dimensions Original Research Article
903
On the vacuum structure of type II string compactifications on Calabi–Yau spaces with H-fluxes Original Research Article
904
On the vacuum wavefunction and string tension of Yang-Mills theories in (2+1) dimensions
905
On the valid frequency range of Timoshenko beam theory
906
On the valid ligament range of specimens for the essential work of fracture method: The inconsequence of stress criteria
907
On the validation and application of fluid–structure interaction analysis of reactor vessel internals at loss of coolants accidents
908
On the Validation of a Preliminary Model of Reading Strategy Using SEM: Evidence From Iranian ELT Postgraduate Students
909
On the Validation of Earthquake-Forecasting Models: The Case of Pattern Recognition Algorithms
910
On the Validation of Release 3 of ENDF/B-VI Nuclear Data for Light Water Reactor Criticality Analysis
911
On the validation of risk analysis—A commentary
912
On the validation of risk analysis—A commentary
913
On the validity and applicability of the one-dimensional approximation in cone-jet electrospray
914
On the validity and identification of long-run restrictions for a cointegrated system
915
On the validity of “A proof that the discrete singular convolution (DSC)/Lagrange-distributed approximation function (LDAF) method is inferior to high order finite differences”
916
On the validity of a design method for a solar-assisted ejector cooling system
917
ON THE VALIDITY OF BORN APPROXIMATION
918
On the validity of citation counting in science evaluation: Content analyses of references and citations in psychological publications
919
On the validity of collisional–radiative models
920
On the validity of conforming BEM algorithms for hypersingular boundary integral equations
921
On the Validity of Edgeworth and Saddlepoint Approximations
922
On the validity of Hall–Petch equation for single-phase β Ti–Al–Nb alloys undergoing stress-induced martensitic transformation
923
On the validity of Hertz contact law for granular material acoustics
924
On the validity of hydrodynamics in plane Poiseuille flows
925
On the Validity of Implicitization by Moving Quadrics for Rational Surfaces with No Base Points
926
On the validity of Kirchhoffs law of thermal emission
927
On the validity of numerical wind-driven rain simulation on a rectangular low-rise building under various oblique winds
928
On the validity of quasi-steady assumption in transient droplet combustion
929
On the validity of Raven’s matrices test: Does spatial ability contribute to performance?
930
On the validity of remember–know judgments: Evidence from think aloud protocols
931
On the validity of simulating stagewise development by means of PDP networks: Application of catastrophe analysis and an experimental test of rule-like network performance
932
On the validity of Stokesʹ law at the molecular level
933
On the validity of the adiabatic spreading assumption in droplet impact cooling
934
On the validity of the aluminum equivalent approximation in space radiation shielding applications Original Research Article
935
On the validity of the cosine projection in wind-driven rain calculations on buildings
936
On the validity of the equivalent cores approximation for computing X-ray photoemission and photoabsorption spectral bands Original Research Article
937
On the Validity of the Euler–Lagrange Equation
938
On the validity of the Euler–Lagrange equation
939
On the validity of the Euler–Lagrange equation in a nonlinear case Original Research Article
940
On the validity of the independence principle applied to the vortex-induced vibrations of a flexible cylinder inclined at 60°
941
On the validity of the Jarque–Bera normality test in conditionally heteroskedastic dynamic regression models
942
On the validity of the likelihood ratio and maximum likelihood methods
943
On the validity of the O(18) coupling scheme in N ∼ Z nuclei
944
On the validity of the Onsager reciprocal relations for simultaneous heat transfer and multi-component diffusion
945
On the validity of the Peano theorem for fuzzy differential equations
946
On the validity of the quasi-steady state approximation of bimolecular reactions in solution
947
On the validity of the standard model for primary charge separation in the bacterial reaction center Original Research Article
948
On the validity of the standard SPICE model of the diode forsimulation in power electronics
949
On the validity of the superposition principle in dose calculations for intracavitary implants with shielded vaginal colpostats
950
On the validity of the time-dependent self-consistent-field. approach: application to the vibrational predissociation of Cl2–Ne
951
On the validity of the traditional measurement of spall strength
952
On the validity of the vakonomic model and the chetaev model for constraint dynamical systems
953
On the validity of the variational approximation in discrete nonlinear Schrِdinger equations
954
On the validity of thermal wind balance in alongshelf currents off the New Jersey coast
955
On the validity of utility statements: standard theory versus Duesenberry’s
956
On the valuation of an option to exchange one interest rate for another
957
On the valuation of constant barrier options under spectrally one-sided exponential Lévy models and Carrʹs approximation for American puts
958
On the valuation of interest rate products under multi-factor HJM term-structures
959
On the value and price-responsiveness of ramp-constrained storage
960
On the Value Distribution of Arithmetic Functions Original Research Article
961
On the value distribution of derivatives of meromorphic functions Original Research Article
962
On the value distribution of some difference polynomials
963
On the value function for nonautonomous optimal control problems with infinite horizon
964
On the value of 3D seismic amplitude data to reduce uncertainty in the forecast of reservoir production
965
On the Value of a Collection of Species
966
On the value of an item subject to general repair or maintenance
967
On the value of changes in life expectancy
968
On the value of conducting dance/movement therapy research
969
On the value of decentralised PV systems for the GCC residential sector
970
On the value of experimental data to reduce the prediction uncertainty of a process-oriented catchment model
971
On the value of glacier mass balances for hydrological model calibration
972
On the value of hourly precipitation extremes in regional climate model simulations
973
On the value of incumbency managerial reference points and loss aversion
974
On the value of information in multi-agent decision theory
975
On the value of large predators in Sweden: A regional stratified contingent valuation analysis
976
On the value of learning for Bernoulli bandits with unknown parameters
977
On the Value of Partial Information for Learning from Examples
978
On the value of project safeguards: Embedding real options in complex products and systems
979
On the value of R = ΓhΓl at LEP
980
On the value of redundancy subject to common-cause failures: Toward the resolution of an on-going debate
981
On the value of redundancy subject to common-cause failures: Toward the resolution of an on-going debate
982
On the Value of Soft Bones in Faunal Analysis
983
On the value of the Curie temperature in doped manganites
984
On the value of the max-norm of the orthogonal projector onto splines with multiple knots Original Research Article
985
On the value of the RADIUS (routine antenatal diagnostic imaging with ultrasound) study
986
On the value set of small families of polynomials over a finite field, I
987
On the Value Sets of Special Polynomials over Finite Fields
988
On the values attained by a k-regular sequence
989
On the values of continued fractions: q-series Original Research Article
990
ON THE VALUES OF INDEPENDENCE AND DOMINATION POLYNOMIALS AT SPECIFIC POINTS
991
On the values of permanents of (0, 1) circulant matrices with three ones per row
992
ON THE VALUES OF SOME GENERALIZED LACUNARY POWER SERIES WITH ALGEBRAIC COEFFICIENTS FOR LIOUVILLE NUMBER ARGUMENTS
993
On the van der Waals interaction of carbon nanocones Original Research Article
994
On the vanishing and non-rigidity of the André-Quillen (co)homology Original Research Article
995
On the vanishing of (co)homology over local rings
996
on the vanishing of derived local homology modules
997
ON THE VANISHING OF DERIVED LOCAL HOMOLOGY MODULES
998
ON THE VANISHING OF SOLUTE DIFFUSION IN POROUS MEDIA AT A THRESHOLD MOISTURE CONTENT
999
On the Vanishing of the 2nd André-Quillen Homology of a Local Homomorphism Original Research Article
1000
On the Vanishing of the 2nd André-Quillen Homology of a Local Homomorphism Original Research Article
