بر اساس عنوان

1
Preparation and characterization of lead-free (K0.47Na0.51Li0.02)(Nb0.8Ta0.2)O3 piezoceramic/epoxy composites with 0–3 connectivity
2
Preparation and characterization of Li and Ti codoped NiO nanocomposites for gas sensors applications
3
Preparation and characterization of Li+-modified CaxPb1−xTiO3 film for humidity sensor
4
Preparation and characterization of Li1 + xAlyScx − yTi2 − x(PO4)3 (x = 0.3, y = 0.1, 0.15, 0.2) ceramics
5
Preparation and characterization of Li2TiO3 pebbles by internal gelation sol–gel process
6
Preparation and characterization of Li4Ti5O12 from ilmenite
7
Preparation and characterization of LiAEAlF6:Eu (AE=Mg, Ca, Sr or Ba) phosphors
8
Preparation and characterization of LiAl0.23Mn1.77O4 for supercapacitor electrodes
9
Preparation and Characterization of Lidocaine-loaded, Microemulsion-Based Topical Gels
10
Preparation and characterization of LiFe1/2Ni1/2VO4
11
Preparation and characterization of LiFePO4 cathode materials by hydrothermal method
12
Preparation and characterization of LiMn2O4 and LiCo0.16Mn1.84O4 as cathode materials for lithium-ion batteries by low heating solid state coordination method
13
Preparation and characterization of LiMn2O4 ion-sieve with high Li+ adsorption rate by ultrasonic spray pyrolysis
14
Preparation and characterization of LiMn2O4 nanorod by low heating solid state coordination method
15
Preparation and characterization of LiMn2O4 powders by the emulsion drying method
16
Preparation and characterization of LiNi0.7Co0.2Ti0.05M0.05O2 (M=Mg, Al and Zn) systems as cathode materials for lithium batteries
17
Preparation and characterization of LiNi0.8Co0.2O2/PANI microcomposite electrode materials under assisted ultrasonic irradiation
18
Preparation and characterization of LiNiO2 synthesized from Ni(OH)2 and LiOH·H2O
19
Preparation and characterization of LiNiVO4 powder and non-stoichiometric LiNixVyOz films
20
Preparation and characterization of linseed oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating
21
Preparation and Characterization of Liposomes Containing Essential Oil of Eucalyptus camaldulensis Leaf
22
Preparation and characterization of liposomes containing methanol extract of aerial parts of Platycladus orientalis (L.) Franco
23
Preparation and characterization of lithium fluorophosphate glasses doped with MoO3
24
Preparation and characterization of lithium ion conducting Li2S–P2S5–GeS2 glasses and glass-ceramics
25
Preparation and characterization of lithium ion-conducting oxysulfide glasses
26
Preparation and characterization of lithium nickel cobalt oxide powders via a wet chemistry processing
27
Preparation and characterization of lithium niobate as a novel photocatalyst in hydrogen generation Original Research Article
28
Preparation and characterization of lithium–titanate pebbles by solid-state reaction extrusion and spherodization techniques for fusion reactor
29
Preparation and characterization of LiV3O8 cathode material for lithium secondary batteries through an EDTA-sol-gel method
30
Preparation and characterization of LixZn2−xVxSi1−xO4 ceramics
31
Preparation and characterization of L-Leucine-modified amphiprotic bifunctional mesoporous SBA-15 molecular sieve as a drug carrier for ribavirin
32
Preparation and characterization of Ln0.8Sr0.2Fe0.8Co0.2O3−x (Ln=La, Pr, Nd, Sm, Eu, Gd)
33
Preparation and characterization of Ln9.33+x/3Si6−xAlxO26 (Ln = La, Nd and Sm) with apatite-type structure and its application to a potentiometric O2 gas sensor
34
Preparation and characterization of LnMgAl11O19 (Ln=La, Nd, Gd) ceramic powders
35
Preparation and characterization of long afterglow M2MgSi2O7-based (M: Ca, Sr, Ba) photoluminescent phosphors
36
Preparation and characterization of long chain branched polypropylene mediated by different heteroaromatic ring derivatives
37
Preparation and characterization of long methacrylate monolithic column for capillary liquid chromatography
38
Preparation and characterization of long persistence strontium aluminate phosphor
39
Preparation and characterization of lotus ceramics with different pore sizes and their implication for the generation of microbubbles for CO2 sequestration applications
40
Preparation and characterization of low- and high-adherent transparent multi-walled carbon nanotube thin films
41
Preparation and characterization of low cost ceramic membranes for micro-filtration applications
42
Preparation and characterization of low cost ceramic membranes for mosambi juice clarification Original Research Article
43
Preparation and characterization of low-cost ceramic microfiltration membranes for the removal of chromate from aqueous solutions
44
Preparation and characterization of low-crystallized hydroxyapatite nanoporous plates and granules
45
Preparation and characterization of low-temperature expandable graphite
46
Preparation and characterization of low-temperature hydrogenated nitrile butadiene rubber hybrid with hydrogen bonds for the sealing applications
47
Preparation and characterization of low-temperature nano-crystalline cubic molybdenum carbides and insights on their structures Original Research Article
48
Preparation and characterization of LTA-type zeolite framework dispersed ruthenium nanoparticles and their catalytic application in the hydrolytic dehydrogenation of ammonia–borane for efficient hydrogen generation
49
Preparation and characterization of Lu2SiO5:Ce3+ luminescent ceramic fibers via electrospinning
50
Preparation and characterization of lysine-immobilized poly(glycidyl methacrylate) nanoparticle-coated capillary for the separation of amino acids by open tubular capillary electrochromatography
51
Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates
52
Preparation and characterization of macroporous cellulose–tungsten carbide composite beads for expanded bed applications
53
Preparation and characterization of macroporous LiNi1/3Co1/3Mn1/3O2 using carbon sphere as template
54
Preparation and characterization of macroporous sol–gel bioglass
55
Preparation and characterization of magnesia-coated silica particles by surface-induced precipitation method using magnesia alcoholate precursor
56
Preparation and characterization of magnesium coating deposited by cold spraying
57
Preparation and characterization of magnetic chlorochromate hybrid nanomaterials with triphenylphosphine surface-modified iron oxide nanoparticles
58
Preparation and characterization of magnetic composite microspheres using a free radical polymerization system consisting of DPE
59
Preparation and characterization of magnetic CsH2PW12O40/Fe–SiO2 nanocatalysts for biodiesel production
60
Preparation and characterization of magnetic duolite–polystyrene composite particles for enzyme immobilization Original Research Article
61
Preparation and Characterization of Magnetic Gelatin-Polyvinyl Alcohol Hydrogel for using in the Release of Furosemide Drug
62
Preparation and characterization of magnetic gene vectors for targeting gene delivery
63
Preparation and characterization of magnetic hollow PMMA nanospheres via in situ emulsion polymerization
64
Preparation and characterization of magnetic microspheres for the purification of interferon α-2b
65
Preparation and characterization of magnetic multi-walled carbon nanotubes/ferrite nanocomposite and its application for the removal of aniline from aqueous solution
66
Preparation and characterization of magnetic multi-walled carbon nanotubes–poly(l-lactide) composite
67
Preparation and characterization of magnetic nanocomposite of Schiff base/silica/magnetite as a preconcentration phase for the trace determination of heavy metal ions in water, food and biological samples using atomic absorption spectrometry
68
Preparation and characterization of magnetic nanoparticles by γ-irradiation
69
Preparation and characterization of magnetic nanoparticles for the on-line determination of gold, palladium, and platinum in mine samples based on flow injection micro-column preconcentration coupled with graphite furnace atomic absorption spectrometry
70
Preparation and Characterization of Magnetic Polypyrrole Composite Microspheres Decorated with Copper (II) As A Sensing Platform for Electrochemical Detection of Carbamazepine
71
Preparation and characterization of magnetic PVC nanocomposites
72
Preparation and Characterization of Magnetic Solid Lipid Nanoparticles as a Targeted Drug Delivery System for Doxorubicin
73
Preparation and characterization of magnetic α-Fe2O3 nanofibers coated with uniform layers of silica
74
Preparation and Characterization of Magnetically Active Dual-Zone Sorbent
75
Preparation and characterization of magnetite nanoparticles coated by amino silane
76
Preparation and Characterization of Maleic Anhydride Modified Syndiotactic Polystyrene
77
Preparation and characterization of maleic anhydride-functionalized syndiotactic polystyrene
78
Preparation and characterization of maltosyl-sucrose isomers produced by transglycosylation of maltogenic amylase from Bacillus stearothermophilus
79
Preparation and characterization of manganese dioxide impregnated resin for radionuclide pre-concentration
80
Preparation and characterization of manganese dioxides with nano-sized tunnel structures for zinc ion storage Original Research Article
81
Preparation and Characterization of Manganese Ferrite Nanoparticles via Co-precipitation Method for Hyperthermia
82
Preparation and characterization of manganese oxide catalysts supported on alumina and zirconia-pillared clays Original Research Article
83
Preparation and characterization of manganese(III) halide derivatives of N,N′-bis(aminobenzylidene)-1,2-ethanediamine
84
Preparation and characterization of manganese, nickel and cobalt ferrites submicron particles in sulfonated crosslinked networks
85
Preparation and characterization of matrix retaining electrolyte for a phosphoric acid fuel cell by non-volatile solvent, NMP
86
Preparation and characterization of MCM-41-supported hydroxo-bridged dicupric–phenanthroline complex
87
Preparation and Characterization of Mebeverine Hydrochloride Niosomes as Controlled Release Drug Delivery System
88
Preparation and characterization of mechanical properties of carbon nanotube/45S5Bioglass composites for biologic applications
89
Preparation and characterization of Melanorrhoea usitata lacquer film based on pyrolysis–gas chromatography/mass spectrometry
90
Preparation and characterization of melt-extruded thermoplastic starch/clay nanocomposites
91
Preparation and characterization of merlinoite for potassium extraction from seawater
92
Preparation and characterization of mesophase-pitch-based foam/natural graphite composites
93
Preparation and characterization of mesoporous activated carbon from waste tires Original Research Article
94
Preparation and characterization of mesoporous carbon-supported Pt nanocatalyst and its stability under strong acidic solutions
95
Preparation and characterization of mesoporous Cs2HPW12O40 salt, active in transformation of m-xylene Original Research Article
96
Preparation and characterization of mesoporous lithium borosilicate material via the sol–gel process
97
Preparation and characterization of mesoporous materials from a nonionic fluorinated surfactant: Adsorption of glucose oxidase
98
Preparation and characterization of mesoporous MO2 (M = Ti, Ce, Zr, and Hf) nanopowders by a modified sol–gel method
99
Preparation and characterization of mesoporous N-doped and sulfuric acid treated anatase TiO2 catalysts and their photocatalytic activity under UV and Vis illumination
100
Preparation and characterization of mesoporous SBA-15 supported dye-sensitized TiO2 photocatalyst
101
Preparation and characterization of mesoporous silicon oxycarbide ceramics without free carbon from polysiloxane
102
Preparation and characterization of mesoporous TiO2–CeO2 nanopowders respond to visible wavelength
103
Preparation and characterization of mesoporous titania–alumina ceramic by modified sol–gel method
104
Preparation and characterization of mesostructured titanium dioxide and its application as a photocatalyst for the wastewater treatment
105
Preparation and characterization of metal (Au)– and bimetallic alloys (AuNi)–gelatin nanocomposites
106
Preparation and characterization of metal oxide/polyimide nanocomposites
107
Preparation and characterization of metal oxide/polyimide nanocomposites
108
Preparation and Characterization of Metal Soaps of Cocos Nucifera Seed Oil
109
Preparation and characterization of metal-doped carbon aerogel for supercapacitor
110
Preparation and characterization of metallic membrane using wire arc spraying
111
Preparation and characterization of metalorganic chemical vapor deposited nickel oxide and lithium nickel oxide thin films
112
Preparation and characterization of methacrylate-based monolith for capillary hydrophilic interaction chromatography
113
Preparation and characterization of methanofullerenes for polymer–fullerene bulk heterojunction solar cells Original Research Article
114
Preparation and characterization of methoxy poly(ethylene glycol)/poly( -caprolactone) amphiphilic block copolymeric nanospheres for tumor-specific folate-mediated targeting of anticancer drugs
115
Preparation and characterization of methylic and ethylic biodiesel from cottonseed oil and effect of tert-butylhydroquinone on its oxidative stability
116
Preparation and characterization of Mg nanoparticles
117
Preparation and characterization of Mg(OH)2 nanoparticles and flame-retardant property of its nanocomposites with EVA
118
Preparation and characterization of Mg(OH)2 nanorods by liquid–solid arc discharge technique
119
Preparation and characterization of Mg0.9Ti0.06V0.04Ni–carbon material composites for electrochemical use
120
Preparation and characterization of Mg-6Li and Mg-6Li-1Y alloys
121
Preparation and characterization of Mg–Al/Zn–Al layered double hydroxides intercalated with (+)-2,3-di(p-toluyl)-tartaric acid
122
Preparation and characterization of Mg-doped ZnO thin films by sol–gel method
123
Preparation and characterization of MgO nanorods
124
Preparation and characterization of MgO stepped surfaces
125
Preparation and characterization of MgO thin films by a simple nebulized spray pyrolysis technique
126
Preparation and characterization of micelles of oligomeric chitosan linked to all-trans retinoic acid
127
Preparation and characterization of micro components fabricated by micro powder injection molding
128
Preparation and characterization of microencapsulated ammonium polyphosphate with UMF and its application in WPCs
129
Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content
130
Preparation and characterization of microencapsulated polythiol
131
Preparation and Characterization of Microfiltration Membrane Embedded with Silver Nano-Particles
132
Preparation and characterization of micron and submicron-sized vermiculite
133
Preparation and characterization of micron and submicron-sized vermiculite powders by ultrasonic irradiation
134
Preparation and characterization of microparticles of piroxicam by spray drying and spray chilling methods
135
Preparation and characterization of micropatterned prussian blue thin films with enhanced electrochromic properties
136
Preparation and Characterization of Microporous Nano-Tungsten Trioxide and Its Photocatalytic Activity after Doping Rare Earth
137
Preparation and characterization of microporous poly(vinyl butyral) membranes by supercritical CO2-induced phase separation
138
Preparation and characterization of microporous PVDF/PMMA composite membranes by phase inversion in water/DMSO solutions
139
Preparation and characterization of microporous SiO2–ZrO2 pillared montmorillonite
140
Preparation and characterization of Mingguang palygorskite supported with silver and copper for antibacterial behavior
141
Preparation and characterization of minoxidil loaded nanostructured lipid carrier gel for effective treatment of alopecia
142
Preparation and characterization of mixed ammonium salts of Keggin phosphomolybdate
143
Preparation and characterization of mixed character Langmuir-Blodgett films of poly-hexa-decylthiophene
144
Preparation and Characterization of Mixed Matrix Membrane based on Polysulfone (PSF) and Lanthanum Orthoferrite (LaFeO_3) for Gas Separation
145
Preparation and characterization of mixed monolayers and Langmuir−Blodgett films of merocyanine 540/octadecylamine mixture
146
Preparation and characterization of mixed-conducting thin tubular membrane
147
Preparation and characterization of mixed-mode monolithic silica column for capillary electrochromatography
148
Preparation and characterization of mixed-valent of ruthenium oxide/hexacyanoferrate/silicomolybdate hybrid films and their electrocatalytic properties
149
Preparation and characterization of Mn0.43Ni0.9CuFe0.67O4 by a polymerized complex method
150
Preparation and characterization of Mn2O3/TiO2 nanomaterials synthesized by combination of CVC and impregnation method with different Mn loading concentration
151
Preparation and characterization of Mn-doped BaTiO3 thin films by magnetron sputtering
152
Preparation and characterization of Mn-doped ZnS nanoparticles
153
Preparation and characterization of MnFe2O4 in the solvothermal process: Their magnetism and electrochemical properties
154
Preparation and characterization of MnOOH and β-MnO2 whiskers
155
Preparation and Characterization of Mn-Salophen Complex with Superoxide Scavenging Activity
156
Preparation and characterization of MnSe thin films
157
Preparation and characterization of Mo catalysts over AlMCM-41/γ-Al2O3 extruded supports Original Research Article
158
Preparation and Characterization of Mo(VI) and Mo(IV) Complexes with Schiff Base Ligands Bidetentate Derived from Salicylic Acid Hydrazide and The Study of Their Biological Activity
159
Preparation and characterization of model catalysts: from ultrahigh vacuum to in situ conditions at the atomic dimension
160
Preparation and characterization of modified nano-porous PVDF membrane with high antifouling property using UV photo-grafting
161
Preparation and characterization of modified polyethersulfone hollow fiber membranes by blending poly (styrene-alt-maleic anhydride) Original Research Article
162
Preparation and characterization of modified polypropylene by using electron beam irradiation
163
Preparation and characterization of modified polyvinyl alcohol ultrafiltration membranes Original Research Article
164
Preparation and Characterization of Modified Release Nanoparticles Containing Cloperastine Hydrochloride Using Solvent Evaporation Method
165
Preparation and Characterization of modified sawdust and its application for the removal of Methyl Orange dye: Kinetic, Isotherm and Real sample studies
166
Preparation and characterization of modified sodium carboxymethyl cellulose via free radical graft copolymerization of vinyl sulfonic acid in aqueous media
167
Preparation and characterization of modified starch granules with high hydrophobicity and flowability
168
Preparation and characterization of molecular weight fractions of glycosaminoglycan from sea cucumber Thelenata ananas using free radical depolymerization Original Research Article
169
Preparation and characterization of molecular weight standards of low polydispersity from oat and barley (1→3)(1→4)-β-d-glucan
170
Preparation and characterization of molecularly imprinted electropolymerized carbon electrodes
171
Preparation and characterization of molecularly imprinted monolithic column based on 4hydroxybenzoic acid for the molecular recognition in capillary electrochromatography
172
Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography Original Research Article
173
Preparation and characterization of molecularly imprinted polymer for di(2-ethylhexyl) phthalate: Application to sample clean-up prior to gas chromatographic determination
174
Preparation and characterization of molybdenum and tungsten compounds with diazabutadiene ligands constructed from amino esters and glyoxal: Crystal structures of meso and C2-symmetric isomers of Mo(CO)4(dab-asp(OMe)-OMe)
175
Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying
176
Preparation and characterization of molybdenum sulfide supported on β-zeolites obtained from [Mo3S4(H2O)9]4+ precursor Original Research Article
177
Preparation and Characterization of Molybdenum Trioxide Thin Films Grown by Two-Step Method: DC Sputtering and Plasma Oxidation
178
Preparation and characterization of mono- and hetero-dinuclear complexes with a dicompartmental macrocyclic ligand containing hexa- and penta-coordination sites
179
Preparation and characterization of monocaprate nanostructured lipid carriers
180
Preparation and characterization of monoclinic sulfur nanoparticles by water-in-oil microemulsions technique
181
Preparation and characterization of monoclonal antibodies against bovine myeloperoxidase
182
Preparation and characterization of monoclonal antibodies against bovine myeloperoxidase
183
Preparation and characterization of monodisperse Ce-doped TiO2 microspheres with visible light photocatalytic activity
184
Preparation and Characterization of Monodisperse FePd Nanoparticles
185
Preparation and Characterization of Monodisperse PbSe Semiconductor Nanocrystals in a Noncoordinating Solvent
186
Preparation and characterization of monodispersed indium–tin oxide nanoparticles
187
Preparation and characterization of monodispersed PS/Ag composite microspheres through modified electroless plating
188
Preparation and characterization of monodispersed WO3 nanoclusters on TiO2(110)
189
Preparation and Characterization of Mono-Imidazole Ligated (meso-Tetramesitylporphyrinato)iron(III) Complexes: Model for Cytochromes c
190
Preparation and characterization of monolith catalysts loaded with copper and manganese for low-temperature NH3-SCR
191
Preparation and characterization of monolithic alumina aerogels
192
Preparation and characterization of monolithic column by grafting pH-responsive polymer
193
Preparation and characterization of monolithic methylsilicone xerogels doped with liquid-phase synthesized TiO2
194
Preparation and characterization of monolithic polyaniline–graphite composite actuators
195
Preparation and characterization of monolithic polymer columns for capillary electrochromatography
196
Preparation and characterization of monoliths covalently bonded chelating groups for capillary electrochromatographic separation of metal ions
197
Preparation and characterization of mono-valent ion selective polypyrrole composite ion-exchange membranes
198
Preparation and characterization of montmorillonite modified by phosphorus–nitrogen containing quaternary ammonium salts
199
Preparation and characterization of montmorillonite modified with 3-aminopropyltriethoxysilane
200
Preparation and characterization of montmorillonite/brea gum nanocomposites films
201
Preparation and characterization of Montmorillonite/ZrO2 nanocomposite and its application for removal of Congo red
202
Preparation and characterization of morph-genetic aluminum nitride/carbon composites from filter paper
203
Preparation and characterization of morph-genetic C/TiN composites from filter paper
204
Preparation and characterization of mSA/mCS bipolar membranes modified by CuTsPc and CuTAPc
205
Preparation and characterization of mTHPC-loaded solid lipid nanoparticles for photodynamic therapy
206
Preparation and characterization of mucilage polysaccharide for biomedical applications
207
Preparation and characterization of mullite/zirconia and spinel/zirconia composites
208
Preparation and characterization of multifunctional polypyrrole–Au coated NiO nanocomposites and study of their electrocatalysis toward several important bio-thiols
209
Preparation and characterization of multilayer NiO nano-products via electrospinning
210
Preparation and characterization of multilayer Systems consisting of the soluble and electrochemically synthesized polypyrrole films
211
Preparation and characterization of multilayered microcapsule-like microreactor for self-healing polymers
212
Preparation and characterization of multiple emulsions (W/Si/W) by single-step emulsification
213
Preparation and characterization of multi-walled carbon nanotube/hydroxyapatite nanocomposite film dip coated on Ti–6Al–4V by sol–gel method for biomedical applications: An in vitro study
214
Preparation and characterization of multiwalled carbon nanotube/In2O3 composites Original Research Article
215
Preparation and characterization of multi-walled carbon nanotube/PBNPI nanocomposite membrane for H2/CH4 separation
216
Preparation and characterization of multiwalled carbon nanotube/poly(3-hexylthiophene) thermoelectric composite materials
217
Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells Original Research Article
218
Preparation and characterization of multi-walled carbon nanotubes with nickel–phosphorous layers of high magnetic properties
219
Preparation and Characterization of Multiwalled Carbon Nanotubes-Polythiophene Nanocomposites and its Gas Sensitivity Study at Room Temperature
220
Preparation and characterization of MWCNTCOOH/PVC ultrafiltration membranes to use in water treatment
221
Preparation and characterization of MWCNT–COOH–cellulose–MgO NP nanocomposite as adsorbent for removal of methylene blue from aqueous solutions: isotherm, thermodynamic and kinetic studies
222
Preparation and Characterization of Myristoylated Chitosan Nanogel as Carrier of Silibinin for Breast Cancer Therapy
223
Preparation and characterization of n- and p-type ytterbium doped InP epitaxial layers
224
Preparation and characterization of N-(2-carboxybenzyl)chitosan as a potential pH-sensitive hydrogel for drug delivery Original Research Article
225
Preparation and characterization of N,N-diacetatodithiocarbamato metal complexes with large negative charges
226
Preparation and characterization of N,O-carboxymethyl chitosan (NOCC)/polysulfone (PS) composite nanofiltration membranes
227
Preparation and characterization of N,O-carboxymethyl chitosan/Polysulfone composite nanofiltration membrane crosslinked with epichlorohydrin Original Research Article
228
Preparation and Characterization of N-4-Nitrophenyl- -prolinol Nanocrystals in Sol–Gel Matrices
229
Preparation and characterization of NaBiO3 nanopowders by different methods for photocatalytic reduction of CO2
230
Preparation and characterization of N-acetylchitosan, N-propionylchitosan and N-butyrylchitosan microspheres for controlled release of 6-mercaptourine
231
Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery
232
Preparation and characterization of Nafion/sPOSS polyelectrolyte nanocomposite membranes for direct methanol fuel cell applications
233
Preparation and characterization of nano hydroxyapatite/polymeric composites materials. Part I
234
Preparation and characterization of nano particles ZnO films for dye-sensitized solar cells
235
Preparation and characterization of nano silver nitrate by Pyrus communis plant extract (peel and seeds) and biological activity study
236
Preparation and characterization of nano silver-doped mesoporous titania photocatalysts for dye degradation
237
Preparation and characterization of nano spinels for electrocatalysis of oxygen evolution in alkaline solutions
238
Preparation and characterization of nano WO3/Bi2O3/GO and BaSO4/GO dispersed HDPE composites for X-ray shielding application
239
Preparation and Characterization of Nano ZnFe2O4 Supported on Copper Slag and its Effects on the Degradation of p-Xylene Aqueous Solution
240
Preparation and characterization of nano-antioxidant via ionically cross-linked silymarin nanoparticles with chitosan polymer as a carrier
241
Preparation and characterization of nanobiocomposites containing iron nanoparticles prepared from blood and coated with chitosan and gelatin
242
Preparation and characterization of nano-carbon as an adsorbent for industrial water treatment
243
Preparation and characterization of nano-cellulose with new shape from different precursor
244
Preparation and characterization of nanocomposite membranes made of poly(2,6-dimethyl-1,4-phenylene oxide) and montmorillonite for direct methanol fuel cells
245
Preparation and characterization of nanocomposite of maleated poly(butylene adipate-co-terephthalate) with organoclay
246
Preparation and characterization of nanocomposite polyelectrolyte membranes based on Nafion® ionomer and nanocrystalline hydroxyapatite
247
Preparation and characterization of nanocomposite, silica aerogel, activated carbon and its adsorption properties for Cd (II) ions from aqueous solution
248
Preparation and characterization of nanocomposites of polyamidoamine (PAMAM) dendrimers with molybdenum(VI) oxide (MoO3)
249
Preparation and characterization of nanocontainers of corrosion inhibitor based on layered double hydroxides
250
Preparation and characterization of nanocrystal grain TiO2 porous microspheres
251
Preparation and Characterization of Nanocrystal V2O5
252
Preparation and characterization of nano-crystalline LiNi0.5Co0.5VO4 by tartate precursor combustion method
253
Preparation and characterization of nanocrystalline CdSe thin films deposited by SILAR method
254
Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte
255
Preparation and characterization of nanocrystalline CeO2–ZrO2 catalysts by dry method: effect of oxidizing conditions Original Research Article
256
Preparation and characterization of nanocrystalline chromium boride
257
Preparation and characterization of nanocrystalline CuO powders with the different surfactants and complexing agent mediated precipitation method
258
Preparation and characterization of nanocrystalline doped TiO2
259
Preparation and characterization of nanocrystalline ITO thin films on glass and clay substrates by ion-beam sputter deposition method
260
Preparation and characterization of nanocrystalline La-doped ZnO powders through a mechanical milling and their optical properties
261
Preparation and characterization of nanocrystalline Li4Ti5O12 by sol–gel method
262
Preparation and characterization of nanocrystalline nickel monosulfide(h) via the ethanol-thermal reducing process
263
Preparation and characterization of nanocrystalline powders of bismuth vanadate
264
Preparation and characterization of nanocrystalline powders of bismuth vanadate
265
Preparation and characterization of nanocrystalline powders of Cu–Zn alloy by wire electrical explosion method
266
Preparation and characterization of nanocrystalline powders of Cu–Zn alloy by wire electrical explosion method
267
Preparation and characterization of nanocrystalline Sr1−xBi2+yTa2O9 powders
268
Preparation and characterization of nanocrystalline SrWO4 using cyclic microwave radiation
269
Preparation and characterization of nanocrystalline SrWO4 using cyclic microwave radiation
270
Preparation and characterization of nanocrystalline TiO2 thin films
271
Preparation and characterization of nanocrystalline titania powders by sonochemical synthesis
272
Preparation and characterization of nanocrystalline ZnO particles from a hydrothermal process
273
Preparation and characterization of nanocrystalline, high-surface area Cu Ce Zr mixed oxide catalysts from homogeneous co-precipitation
274
Preparation and characterization of nanocrystalline, high-surface area Cu-Ce-Zr mixed oxide catalysts from homogeneous co-precipitation
275
Preparation and characterization of nanocrystallite size cuprous oxide
276
Preparation and characterization of nanodiamond cores coated with a thin Ni–Zn–P alloy film
277
Preparation and characterization of nanoemulsion encapsulating curcumin
278
Preparation and characterization of nanofibrous filtering media
279
Preparation and characterization of nanofiltration membranes by coating polyethersulfone hollow fibers with sulfonated poly(ether ether ketone) (SPEEK)
280
Preparation and characterization of nano-hydroxyapatite within chitosan matrix
281
Preparation and characterization of nano-La (S, C)-TiO2 oriented films by template hydrothermal synthesis
282
Preparation and Characterization of Nano-lignin Biomaterial to Remove Basic Red 2 dye from aqueous solutions
283
Preparation and Characterization of Nanoliposome Containing Isolated VP1 Protein of Foot and Mouth Disease Virus as a Model of Vaccine
284
Preparation and characterization of nanometer-scale powders ceria by electrochemical deposition method
285
Preparation and characterization of nanometer-sized (Pb1−x,Bax)TiO3 powders using acetylacetone as a chelating agent in a non-aqueous sol–gel process
286
Preparation and characterization of nanometric-sized LiCoO2 cathode materials for lithium batteries by a novel sol–gel method
287
Preparation and characterization of nano-NaX zeolite by microwave assisted hydrothermal method
288
Preparation and Characterization of Nanoparticle β-Cyclodextrin:Geraniol Inclusion Complexes
289
Preparation and characterization of nanoparticles formed by chitosan–caseinate interactions
290
Preparation and characterization of nanoplatelets of nickel hydroxide and nickel oxide
291
Preparation and characterization of nanoporous carbon-supported platinum as anode electrocatalyst for direct borohydride fuel cell
292
Preparation and characterization of nanoporous films derived from alicyclic copolyimides having pendent poly(propyleneglycol) groups
293
Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface
294
Preparation and characterization of nanoporous polyimide films from triblock copolyimides
295
Preparation and characterization of nanoporous polyimide films from triblock copolyimides
296
Preparation and characterization of nano-porous silica aerogel from rice husk ash by drying at atmospheric pressure
297
Preparation and Characterization of Nanoporous Silica Aerogel Granules on The Basis of Water Glass Via Ambient Pressure Drying Method
298
Preparation and characterization of nano-rare earth composite materials: application in selectivity catalytic oxidation of ammonia and its cytotoxicity study
299
Preparation and characterization of nanoscale aromatic polyamide particles
300
Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells
301
Preparation and characterization of nano-SiO2/fluorinated polyacrylate composite latex via nano-SiO2/acrylate dispersion
302
Preparation and characterization of nanosize Mn0.4Zn0.6 Fe2O4 ferrite by citrate precursor method
303
Preparation and characterization of nanosize nickel-substituted cobalt ferrites (Co1−xNixFe2O4)
304
Preparation and characterization of nanosized (Y,Bi)VO4:Eu3+ and Y(V,P)O4:Eu3+ red phosphors
305
Preparation and characterization of nano-sized Ag/PVP composites for optical applications
306
Preparation and characterization of nanosized barium calcium titanate crystallites by low temperature direct synthesis
307
Preparation and characterization of nanosized bismuth doped tin dioxide powders with a novel post treatment process
308
Preparation and characterization of nano-sized CoMo/Al2O3 catalyst for hydrodesulfurization Original Research Article
309
Preparation and characterization of nano-sized hydroxyapatite powders produced in a radio frequency (rf) thermal plasma
310
Preparation and characterization of nano-sized hydroxyapatite powders produced in a radio frequency (rf) thermal plasma
311
Preparation and characterization of nanosized lithium cobalt oxide powders for lithium-ion batteries
312
Preparation and characterization of nanosized Pt/Au particles on TiO2-nanotubes
313
Preparation and characterization of nano-sized Pt–Pd/C catalysts and comparison of their electro-activity toward methanol and ethanol oxidation
314
Preparation and characterization of nanosized silver phosphate loaded hydroxyapatite by single step co-conversion process
315
Preparation and characterization of nanosized TiO2 powders by gaseous detonation method
316
Preparation and characterization of nanosized TiO2 powders from aqueous TiCl4 solution
317
Preparation and Characterization of Nanosized Titania Prepared from Beach Black Sands Broad on the Mediterranean Sea Coast in Egypt via Reaction with Acids
318
Preparation and characterization of nanosized titania sensing film
319
Preparation and Characterization of Nanosized ZSM-5 Zeolite Using Kaolin and Investigation of Kaolin Content, Crystallization Time and Temperature Changes on the Size and Crystallinity of Products
320
Preparation and characterization of nano-spherical CoFe2O4 supported on copper slag as a catalyst for photocatalytic degradation of 2-nitrophenol in water
321
Preparation and Characterization of Nanostructure Akermanite Powder by Mechanical Activation Method
322
Preparation and Characterization of Nano-structured Ceramic Powders Synthesized by Emulsion Combustion Method
323
Preparation and Characterization of Nanostructured Electrodes by Electrophoretically Co-deposition of Pd and Pt Nanoparticles
324
Preparation and characterization of nanostructured La2Zr2O7 feedstock used for plasma spraying
325
Preparation and characterization of nanostructured materials for an artificial olfactory sensing system
326
Preparation and characterization of nanostructured MWCNT-TiO2 composite materials for photocatalytic water treatment applications
327
Preparation and characterization of nanostructured NiO thin films by reactive-pulsed laser ablation technique
328
Preparation and characterization of nanostructured NiO/MnO2 composite electrode for electrochemical supercapacitors
329
Preparation and characterization of nanostructured Pd with high electrocatalytic activity
330
Preparation and Characterization of Nanostructured S and Fe co-doped TiO2 Thin Film by Ultrasonic-assisted Spray Pyrolysis Method
331
Preparation and characterization of nano-structured silica from rice husk
332
Preparation and characterization of nano-structured silica from rice husk
333
Preparation and characterization of nanostructured silver particles by one-step spray pyrolysis
334
Preparation and Characterization of Nanostructured Titania-coated Silica Microsphere Membranes with Simultaneous Photo-catalytic and Water Separation Treatment Applications
335
Preparation and Characterization of Nanosuspension of Aprepitant by H96 Process
336
Preparation and Characterization of Nanosuspensions of Triiodoaniline Derivative New Contrast Agent, and Investigation into Its Cytotoxicity and Contrast Properties
337
Preparation and characterization of nano-TiO2 powder
338
Preparation and characterization of nano-zinc borate by a new method
339
Preparation and characterization of nano-zinc oxide
340
Preparation and Characterization of Nano-ZnO Catalyst and its Application in Synthesis of 2-amino-3-phenylsulfonyl-4-aryl-4Hbenzo[ h]chromen Derivatives
341
Preparation and characterization of NaOH treated micro-fibrous polyethylene terephthalate nonwovens for biomedical application
342
Preparation and characterization of NASICON–ZnAl2O4-based ultrafiltration membranes
343
Preparation and Characterization of Natural Fish Bone as an Implant Material
344
Preparation and characterization of natural lower dimensional layered perovskite-type compounds Original Research Article
345
Preparation and characterization of natural rubber dispersed in nano-matrix
346
Preparation and characterization of NaY/PVDF hybrid ultrafiltration membranes containing silver ions as antibacterial materials Original Research Article
347
Preparation and characterization of Nb2O5–Al2O3 composite oxide formed by cathodic electroplating and anodizing
348
Preparation and characterization of Nb-doped TiO2 nanoparticles used as a conductive support for bifunctional CuCo2O4 electrocatalyst
349
Preparation and characterization of NbF5-added Mg hydrogen storage alloy
350
Preparation and characterization of Nd2−xSrxCoO4+δ cathodes for intermediate-temperature solid oxide fuel cell
351
Preparation and characterization of Nd2Zr2O nanocrystals by a polymeric citrate precursor method
352
Preparation and characterization of nebivolol nanoparticles using Eudragit® RS100
353
Preparation and characterization of negative thermal expansion Sc2W3O12/Cu core–shell composite
354
Preparation and characterization of negatively charged hollow fiber nanofiltration membrane by plasma-induced graft polymerization Original Research Article
355
Preparation and characterization of negatively charged PES nanofiltration membrane by blending with halloysite nanotubes grafted with poly (sodium 4-styrenesulfonate) via surface-initiated ATRP
356
Preparation and Characterization of N-Eicosane PCM with Urea-Formaldehyde Shell
357
Preparation and characterization of neodymium-doped ceria electrolyte materials for solid oxide fuel cells
358
Preparation and characterization of networked rectangular MgO nanostructures
359
Preparation and characterization of neutral poly(ethylene glycol) methacrylate-based monolith for normal phase liquid chromatography
360
Preparation and characterization of new and improved soluble-starches, -amylose, and -amylopectin by reaction with benzaldehyde/zinc chloride Original Research Article
361
Preparation and characterization of new biologically active polyurethane foams
362
Preparation and characterization of new chiral ferrocenyl selenides
363
Preparation and characterization of new chiral pyrrolyl α-nitronyl nitroxide radicals in which the imidazolyl framework was directly bound to chiral center
364
Preparation and characterization of new cobalt-free cathode Pr0.5Sr0.5Fe0.8Cu0.2O3−δ for IT-SOFC
365
Preparation and Characterization of New Compound by Electrochemical Oxidation of Methyl Catechol in the Presence of 2-Thiouracil
366
Preparation and characterization of new difunctional cationic radical initiator-montmorillonite hybrids
367
Preparation and characterization of new fluorotellurite glasses for photonics application
368
Preparation and Characterization of New Hetrocyclic Azo Thiozal Dye Ligand and Its Use as a Reagent for Determination of Zn+2 Ion in Drug by New Analytical Method
369
Preparation and characterization of new hydrogels based on hyaluronic acid and α,β-polyaspartylhydrazide
370
Preparation and characterization of new low melting ammonium-based ionic liquids with ether functionality
371
Preparation and characterization of new melt compounded copolyamide nanocomposites
372
Preparation and Characterization of New Metal Complexes of Schiff Bases Contaning a Thiazole Ring
373
Preparation and characterization of new Mg–Al–Fe oxide catalyst precursors for dehydrogenation of ethylbenzene in the presence of carbon dioxide
374
Preparation and characterization of new microporous stretched membrane for lithium rechargeable battery
375
Preparation and characterization of new Ni-aluminosilicate catalysts and their performance in the epoxidation of (Z)-cyclooctene Original Research Article
376
Preparation and characterization of new non-fluorinated polymeric and composite membranes for PEMFCs
377
Preparation and characterization of new optically active poly(N-acryloyl chloride) functionalized with (S)-phenylalanine and pendant pyrene
378
Preparation and characterization of new organoclays using natural amino acids and Cloisite Na+
379
Preparation and characterization of new perovskites containing Ir(VI) and Ir(V) [BaM0.50Ir0.50O2.75 and BaM0.25Ir0.75O3 (M = Li or Na)]
380
Preparation and characterization of new poly-pyrrole having side chain liquid crystalline moieties
381
Preparation and characterization of new proton conducting chalcogenide glasses
382
Preparation and characterization of new quaternized carboxymethyl chitosan/rectorite nanocomposite
383
Preparation and Characterization of New Ruthenium and Osmium Containing Polyoxometalates, [M (DMSO)3Mo7O24]4- (M = Ru(II), Os(II)), and Their Use as Catalysts for the Aerobic Oxidation of Alcohols
384
Preparation and characterization of new Sm(III) complexes with some bidentate ligands contains (N,N), (S,N), (O,O) and (N,O) donor atoms
385
Preparation and characterization of new solid-phase microextraction fibers obtained by sol–gel technology and zirconium oxide electrodeposited on NiTi alloy
386
Preparation and characterization of new tetradentate Schiff base metal complexes and biological activity evaluation
387
Preparation and characterization of NF composite membrane
388
Preparation and Characterization of Ni (II), Co (II) and Cr (III) Complexes with Benzoylamethylenetriphenylphosphine
389
Preparation and characterization of Ni based catalysts for the catalytic partial oxidation of methane: Effect of support basicity on H2/CO ratio and carbon deposition
390
Preparation and characterization of N–I co-doped nanocrystal anatase TiO2 with enhanced photocatalytic activity under visible-light irradiation
391
Preparation and characterization of Ni nanoparticles in an MCM mesoporous material
392
Preparation and characterization of Ni/NiO composite using microwave irradiation and sonication
393
Preparation and characterization of nickel based catalysts on silica, alumina and titania obtained by sol–gel method
394
Preparation and characterization of nickel hollow fiber membrane Original Research Article
395
Preparation and characterization of nickel nano-Al2O3 composite coatings by sediment co-deposition
396
Preparation and characterization of nickel oxide nanoparticles and its adsorption optimization for parachlorophenol
397
Preparation and characterization of nickel oxide nanoparticles and their application in glucose and methanol sensing
398
Preparation and Characterization of Nickel Oxide Thin Films by Electrostatic Spray Technique
399
Preparation and characterization of nickel sulphide thin films using successive ionic layer adsorption and reaction (SILAR) method
400
Preparation and characterization of nickel/zinc sulphide: Bifunctional magnetic-optical nanocomposites
401
Preparation and characterization of nickel-based mixed-oxides and their performance for catalytic methane decomposition
402
Preparation and characterization of nickel-coated graphite nanosheets
403
Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-deposition
404
Preparation and characterization of nickel-modified carbon cryogel beads with uniform particle size
405
Preparation and Characterization of Nickel–poly(St-co-AA) Composite Nanoparticles
406
Preparation and characterization of Ni-coated Cr3C2 powder by room temperature ultrasonic-assisted electroless plating
407
Preparation and characterization of Ni–Cu–P/CNTs quaternary electroless composite coating
408
Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels
409
Preparation and characterization of NiCuZn ferrite nanocrystalline powders by auto-combustion of nitrate–citrate gels
410
Preparation and characterization of Ni-doped ZnO particles via a bioassisted process
411
Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route Original Research Article
412
Preparation and characterization of Ni–Mn–Ga high temperature shape memory alloy thin films using rf magnetron sputtering method
413
Preparation and Characterization of NiO Based Nano-ceramic Composites as Alternative Anode Materials for Solid Oxide Fuel Cells (SOFCs)
414
Preparation and characterization of NiO nanofibres via an electrospinning technique
415
Preparation and characterization of NiO, Fe2O3, Ni0.04Zn0.96O and Fe0.03Zn0.97O nanoparticles
416
Preparation and characterization of NiO/MgO/Al2O3 supported CoPcS catalyst and its application to mercaptan oxidation
417
Preparation and Characterization of Niobium Carbide and Carbonitride
418
Preparation and characterization of niobium oxide for the catalytic aldol condensation of acetone Original Research Article
419
Preparation and characterization of niobium-doped barium titanate nanocrystalline powders and ceramics
420
Preparation and characterization of niosomes containing resveratrol Original Research Article
421
Preparation and Characterization of NiO-WO3 nanocomposite with Enhanced Photocatalytic Activity under Visible Light Irradiation
422
Preparation and characterization of Ni-plated polytetrafluoroethylene plate as an electrode for alkaline fuel cell
423
Preparation and characterization of Ni–PTFE plate as an electrode for alkaline fuel cell: Effects of conducting materials on the performance of electrode
424
Preparation and Characterization of Nitrendipineloaded Eudragit RL 100 Microspheres Prepared by an Emulsion-Solvent Evaporation Method
425
Preparation and characterization of nitrogen doped SrTiO3 photocatalyst
426
Preparation and characterization of nitrogen doped ZnO films and homojunction diodes
427
Preparation and characterization of nitrogen-doped TiO2 nanoparticles by the laser pyrolysis of N2O-containing gas mixtures
428
Preparation and characterization of Ni–Zr–O nanoparticles and its catalytic behavior for ethane oxidative dehydrogenation
429
Preparation and characterization of nonaarginine-modified chitosan nanoparticles for siRNA delivery
430
Preparation and characterization of non-aqueous extracts from chilli (Capsicum annuum L.) and their microencapsulates obtained by spray-drying Original Research Article
431
Preparation and characterization of non-covalently immobilized amylosucrase using a pH-dependent autoprecipitating carrier
432
Preparation and characterization of non-evaporable porous Ti–Zr–V getter films
433
Preparation and characterization of nonfouling polymer brushes on poly(ethylene terephthalate) film surfaces
434
Preparation and characterization of non-ionic block co-polymer templated mesoporous silica membranes
435
Preparation and characterization of non-linear poly(ethylene glycol) analogs from oligo(ethylene glycol) functionalized polyisocyanopeptides
436
Preparation and characterization of nonmetal promoter modified CuZnAl catalysts for higher alcohol from synthesis gas through complete liquid phase method
437
Preparation and characterization of non-supported microfiltration membranes from aluminosilicates
438
Preparation and characterization of novel “polyMOB” polyanionic solid electrolytes with weak coulomb traps
439
Preparation and characterization of novel acetylated cellulose ether (ACE) membranes for desalination applications
440
Preparation and characterization of novel alkylviologens-intercalated vanadyl-vanadate (RV)V3O8
441
Preparation and characterization of novel bioactive dicalcium silicate ceramics
442
Preparation and characterization of novel bioactive α-Tricalcium Phosphate doped with Dicalcium Silicate ceramics
443
Preparation and characterization of novel biodegradable composites based on acylated cellulose fibers and poly(ethylene sebacate)
444
Preparation and Characterization of Novel Bionanocomposite Based on Tapioca Starch/Gelatin/Nanorod-rich ZnO: Towards Finding Antimicrobial Coating for Nuts
445
Preparation and Characterization of Novel Bionanocomposite Based on Tapioca Starch/Gelatin/Nanorod-rich ZnO: Towards Finding Antimicrobial Coating for Nuts
446
Preparation and characterization of novel carbopol based bigels for topical delivery of metronidazole for the treatment of bacterial vaginosis
447
Preparation and characterization of novel chitosan composite nanofiltration membrane containing mesogenic units Original Research Article
448
Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel
449
Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel
450
Preparation and characterization of novel composites based on chitosan and clinoptilolite with enhanced adsorption properties for Cu2+
451
Preparation and characterization of novel copoly (phthalazinone ether sulfone) ultrafiltration membranes with excellent thermal stability
452
Preparation and characterization of novel crown ether functionalized ionic liquid-based solid-phase microextraction coatings by sol–gel technology
453
Preparation and characterization of novel curdlan/chitosan blending membranes for antibacterial applications
454
Preparation and characterization of novel dicyanate/benzoxazine/bismaleimide copolymer
455
Preparation and characterization of novel dumbbell-like [60]fullerene polystyrene derivatives
456
Preparation and characterization of novel grafted polyethylene based azo-polymers bearing oligo(ethylene glycol) spacers
457
Preparation and characterization of novel highly omniphobic cellulose fibers organic–inorganic hybrid materials
458
Preparation and characterization of novel hydrophobic/hydrophilic polyetherimide composite membranes for desalination by direct contact membrane distillation
459
Preparation and characterization of novel immobilized Fe3O4@SiO2@mSiO2–Pd(0) catalyst with large pore-size mesoporous for Suzuki coupling reaction Original Research Article
460
Preparation and characterization of novel IR-transparent semiconducting carbonaceous materials Original Research Article
461
Preparation and characterization of novel Li2S–Sb2S3 and Li2S–P2S5–Sb2S3 glassy systems
462
Preparation and characterization of novel macroporous cellulose beads regenerated from ionic liquid for fast chromatography
463
Preparation and characterization of novel main-chain azobenzene polymers via step-growth polymerization based on click chemistry
464
Preparation and characterization of novel melamine modified poly(urea–formaldehyde) self-repairing microcapsules
465
Preparation and Characterization of novel metal complexes containing hydrazone derived from camphor and 2,4-dinitrophenyl hydrazine
466
Preparation and characterization of novel mixed-ligand oxorhenium(V) and oxotechnetium(V) complexes bearing up to four ester groups
467
Preparation and characterization of novel molecularly imprinted polymers based on thiourea receptors for nitrocompounds recognition
468
Preparation and characterization of novel nanocomposites based on polyacrylonitrile/kaolinite
469
Preparation and characterization of novel nanoencapsulated phase change materials
470
Preparation and Characterization of Novel Optically Active Poly(Amide-Ester-Imide)s Based on Bis(p-aminobezoic acid)-Ntrimellitylimido-S-valine via Direct Polyesterification.
471
Preparation and characterization of novel organic radical anions for organic conductors: TEMPO-NHSO3− and TEMPO-OSO3−
472
Preparation and characterization of novel organo-clay minerals for Hg(II) ions adsorption from aqueous solution
473
Preparation and characterization of novel organosoluble and thermally stable poly(benzimidazole-amide)s bearing phthalimide pendent groups
474
Preparation and characterization of novel oxidized cellulose acetate methyl esters
475
Preparation and characterization of novel Pd/SiO2 and Ca–Pd/SiO2 egg-shell catalysts with porous hollow silica
476
Preparation and characterization of novel pegylated hydrophilic pH responsive polysulfone ultrafiltration membrane
477
Preparation and characterization of novel pervaporation membranes for the separation of water–isopropanol mixtures using chitosan and NaY zeolite
478
Preparation and characterization of novel poly-(vinyl alcohol)–Zostera flakes composites for packaging applications
479
Preparation and characterization of novel poly(vinylidene fluoride) membranes using self-assembled dibenzylidene sorbitol for membrane distillation Original Research Article
480
Preparation and characterization of novel polyethylene/carbon nanotubes nanocomposites with core–shell structure
481
Preparation and characterization of novel polypyrrole-nanotube/polyaniline free-standing composite films via facile solvent-evaporation method
482
Preparation and characterization of novel polythiophenes bearing oligo(ethylene glycol) spacers and porphyrin units: Optical and electrochemical properties
483
Preparation and characterization of novel porous PMMA-SiO2 hybrid membranes Original Research Article
484
Preparation and characterization of novel porous PVDF-ZrO2 composite membranes Original Research Article
485
Preparation and characterization of novel solid polymer blend electrolytes based on poly (vinyl pyrrolidone) with various concentrations of lithium perchlorate
486
Preparation and characterization of novel ZnS/sulfur-containing polymer nanocomposite optical materials with high refractive index and high nanophase contents
487
Preparation and characterization of novel β-chitin/nanosilver composite scaffolds for wound dressing applications
488
Preparation and characterization of novel β-chitin/nanosilver composite scaffolds for wound dressing applications
489
Preparation and characterization of N-succinyl-N′-octyl chitosan micelles as doxorubicin carriers for effective anti-tumor activity
490
Preparation and characterization of n-type conductive (Al, Co) co-doped ZnO thin films deposited by sputtering from aerogel nanopowders
491
Preparation and characterization of nylon 11/organoclay nanocomposites
492
Preparation and characterization of nylon 6/graphite composite
493
Preparation and characterization of nylon 6\Cu2+-exchanged and Fe3+exchanged montmorillonite nanocomposite
494
Preparation and characterization of nylon 66/montmorillonite nanocomposites with co-treated montmorillonites
495
Preparation and characterization of O/W nanoemulsion with eucalyptus essential oil and study of in vitro antibacterial activity
496
Preparation and characterization of O/W nanoemulsion with Mint essential oil and Parsley aqueous extract and the presence effect of chitosan
497
Preparation and characterization of octadecylsilane monolayers on indium–tin oxide (ITO) surfaces
498
Preparation and characterization of oligochitosan–tragacanth nanoparticles as a novel gene carrier
499
Preparation and characterization of oligomannuronates from alginate degraded by hydrogen peroxide
500
Preparation and characterization of o-LiMnO2 cathode materials
501
Preparation and characterization of olive pit powder as a filler to PLA-matrix bio-composites
502
Preparation and characterization of one-dimensional GaN nanorods with Tb intermediate layer
503
Preparation and Characterization of Open Tunnel Oxide ALPHA-MnO2 Precipitated by Ozone Oxidation
504
Preparation and characterization of open-tubular capillary column modified with graphene oxide nanosheets for the separation of small organic molecules
505
Preparation and characterization of optical property of crosslinkable film of chitosan with 2-thiophenecarboxaldehyde
506
Preparation and characterization of optical property of crosslinkable film of chitosan with 2-thiophenecarboxaldehyde
507
Preparation and characterization of optical spectroscopy of Lu2O3:Eu nanocrystals
508
Preparation and characterization of optical-functional diblock copolymer brushes on hollow sphere surface via atom transfer radical polymerization
509
Preparation and characterization of optically active polyamides containing natural L-leucine amino acid linkages
510
Preparation and characterization of ordered intermetallic platinum phases for electrocatalytic applications
511
Preparation and characterization of ordered mesoporous silica membrane
512
Preparation and characterization of ordered porous carbons for increasing hydrogen storage behaviors
513
Preparation and characterization of organic–inorganic hybrid perovskite (C4H9NH3)2CuCl4
514
Preparation and characterization of organic–inorganic poly(ethylene glycol)/WS2 nanocomposite
515
Preparation and characterization of organic-soluble acetylated starch nanocrystals
516
Preparation and characterization of organo-functionalized silicas for bilirubin removal
517
Preparation and characterization of organo-montmorillonites. Application in adsorption of the 2,4,5-trichlorophenol from aqueous solution
518
Preparation and characterization of oriented silica nanowires
519
Preparation and characterization of osteochondral scaffold
520
Preparation and characterization of ovalbumin and carboxymethyl cellulose conjugates via glycosylation
521
Preparation and characterization of oxidized alginate covalently cross-linked galactosylated chitosan scaffold for liver tissue engineering
522
Preparation and Characterization of P(MAA-g-EG) Nanospheres for Protein Delivery Applications
523
Preparation and Characterization of P2O5 Containing Canasite Glass-Ceramics as Potential Materials for Dental Restorations
524
Preparation and characterization of PA6/PAni-TSA nanofibers
525
Preparation and characterization of PAA/PVDF membrane-immobilized Pd/Fe nanoparticles for dechlorination of trichloroacetic acid
526
Preparation and characterization of Paliperidone loaded solid lipid nanoparticles
527
Preparation and Characterization of Palladium Alloy Composite Membranes with a Diffusion Barrier for Hydrogen Separation
528
Preparation and characterization of palladium alloy membranes for catalytic membrane reactors Original Research Article
529
Preparation and characterization of palladium(II) complexes with N-arylalkyliminodiacetic acids. Catalytic activity of complexes in methoxycarbonylation of iodobenzene
530
Preparation and characterization of palladium(II) complexes with N-arylalkyliminodiacetic acids. Catalytic activity of complexes in methoxycarbonylation of iodobenzene
531
Preparation and characterization of palladium-plated porous glass for hydrogen enrichment
532
Preparation and characterization of palmitic acid/graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material
533
Preparation and characterization of PAn/NiO nanocomposite using various surfactants
534
Preparation and characterization of partial-cocrystallized catalyst-coated membrane for solid polymer electrolyte water electrolysis
535
Preparation and characterization of patterned copper sulfide thin films on n-type TiO2 film surfaces
536
Preparation and Characterization of Pb(II) Ion Selective Electrode based on Dithizone as Chemical Sensor
537
Preparation and characterization of Pb(Zr0.53Ti0.47)O3/CoFe2O4 composite thick films by hybrid sol–gel processing
538
Preparation and characterization of PbS nanoclusters made by using a powder method on ionomers
539
Preparation and characterization of PbS nanoparticles in AOT micellar medium
540
Preparation and characterization of PC/SBR heterogeneous cation exchange membrane filled with carbon nano-tubes
541
Preparation and characterization of PCL polymeric scaffolds coated with chitosan/ bioactive glass/gelatin nanoparticles using the tips methodology for bone tissue engineering
542
Preparation and Characterization of PCL/CS/SN Nanocomposites for Antibacterial Applications
543
Preparation and Characterization of PCL-PEG-PCL Copolymeric Nanoparticles as Polymersomes for Delivery Hydrophilic Drugs
544
Preparation and characterization of Pd and Pd-Ni alloy membranes on porous substrates by MOCVD with mixed metal β-diketone precursors
545
Preparation and characterization of Pd/Al2O3 and Pd nanoparticles as standardized test material for chemical and biochemical studies of traffic related emissions☆
546
Preparation and characterization of Pd/C catalyst obtained in NH3-mediated polyol process
547
Preparation and characterization of Pd/Fe bimetallic nanoparticles immobilized in PVDF·Al2O3 membrane for dechlorination of monochloroacetic acid
548
Preparation and characterization of Pd2Sn nanoparticles
549
Preparation and characterization of Pd–Cu composite membranes for hydrogen separation
550
Preparation and characterization of Pd-zeolite composite membranes for hydrogen separation Original Research Article
551
Preparation and characterization of PE and PE-g-MAH/montmorillonite nanocomposites
552
Preparation and characterization of PEG/SiO2 composites as shape-stabilized phase change materials for thermal energy storage
553
Preparation and characterization of PEG-cross-linked chitosan hydrogel films with controllable swelling and enzymatic degradation behavior
554
Preparation and characterization of PEG-cross-linked chitosan hydrogel films with controllable swelling and enzymatic degradation behavior
555
Preparation and characterization of PEG-Mentha oil nanoparticles for housefly control
556
Preparation and characterization of PEGyated Concanavalin A for affinity chromatography with improved stability
557
Preparation and characterization of PEI-loaded MCM-41 for CO2 capture
558
Preparation and characterization of pentamethylcyclopentadienylrhodium(III) and iridium(III), and (arene)ruthenium(II) complexes of 1,8-bis(diphenylphosphinomethyl)naphthalene
559
Preparation and Characterization of Perfume Spray-Coated CdO Thin Films: Substrate Temperature Effect
560
Preparation and characterization of perhydroxyl-cucurbit[6]uril bonded silica stationary phase for hydrophilic-interaction chromatography
561
Preparation and characterization of permanently anti-static packaging composites composed of high impact polystyrene and ion-conductive polyamide elastomer
562
Preparation and characterization of perovskite REFeO3 nanocrystalline powders
563
Preparation and characterization of persimmon leaves/cellulose blend fiber and comparison with cellulose fiber
564
Preparation and characterization of PES and PSU membrane humidifiers
565
Preparation and characterization of PES nanofiltration membrane embedded with modified graphene oxide for dye removal from algal wastewater
566
Preparation and characterization of PES/TiO2 composite membranes
567
PREPARATION AND CHARACTERIZATION OF PET NONWOVEN COATED WITH ZnO-Ag BY ONE-POT HYDROTHERMAL TECHNIQUES
568
Preparation and characterization of PFSA–PVA–SiO2/PVA/PAN difunctional hollow fiber composite membranes
569
Preparation and characterization of pH- and temperature-responsive nanocomposite double network hydrogels
570
Preparation and characterization of pH- and temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium alginate and crosslinked poly(N-isopropylacrylamide)
571
Preparation and characterization of pH- and temperature-sensitive pullulan microspheres for controlled release of drugs
572
Preparation and characterization of pH- and thermo‐sensitive polyethersulfone hollow fiber membranes modified with P(NIPAAm-MAA-MMA) terpolymer Original Research Article
573
Preparation and characterization of pH sensitive poly(N-vinyl-2-pyrrolidone/itaconic acid) copolymer hydrogels
574
Preparation and characterization of PHBV microsphere/45S5 bioactive glass composite scaffolds with vancomycin releasing function
575
Preparation and characterization of phenol–formaldehyde adhesives modified with enzymatic hydrolysis lignin
576
Preparation and characterization of phosphonium montmorillonite with enhanced thermal stability
577
Preparation and characterization of phosphorus-doped aluminum oxide thin films
578
Preparation and characterization of photocatalytic carbon dots-sensitized electrospun titania nanostructured fibers
579
Preparation and characterization of photocatalytic titania–alumina composite membranes by sol–gel methods
580
Preparation and characterization of photochromic poly(methyl methacrylate) and ethyl cellulose nanocapsules containing a spirooxazine dye
581
Preparation and characterization of photoluminescent ultrathin films based on polyoxometalates
582
Preparation and characterization of pH-responsive hydrogel magnetite nanocomposite
583
Preparation and Characterization of pH-sensitive Doxorubicin Grafted Hyaluronic Acid Nano-micelles
584
Preparation and characterization of pH-sensitive polyethersulfone hollow fiber membrane for flux control
585
Preparation and characterization of pH-sensitive polyethersulfone hollow fiber membranes modified by poly(methyl methylacrylate-co-4-vinyl pyridine) copolymer
586
Preparation and characterization of pH-sensitive proteinoid microspheres for the oral delivery of methotrexate
587
Preparation and characterization of physical gels and beads from chitin solutions
588
Preparation and characterization of pillared carbons obtained by pyrolysis of silylated graphite oxides Original Research Article
589
Preparation and characterization of pillared montmorillonite: application in adsorption of cadmium Original Research Article
590
Preparation and Characterization of Pistacia khinjuk Gum Nanoparticles Using Response Surface Method: Evaluation of Its Anti-Bacterial Performance and Cytotoxicity
591
Preparation and characterization of pitch-based carbon fibers
592
Preparation and characterization of PLA/fibroin composite and culture of HepG2 (human hepatocellular liver carcinoma cell line) cells
593
Preparation and characterization of planar Ni–Au bimetallic model catalysts
594
Preparation and Characterization of PLA-PEG-PLA/PEI/DNA Nanoparticles for Improvement of Transfection Efficiency and Controlled Release of DNA in Gene Delivery Systems
595
Preparation and characterization of plasma sprayed Ni3Al–hBN composite coating
596
Preparation and characterization of plasma treated PP composite electrolyte membranes
597
Preparation and characterization of plasma-modified PTFE membrane and its application in direct contact membrane distillation Original Research Article
598
Preparation and characterization of plasma-sprayed Al/Al2O3 composite coating
599
Preparation and characterization of platelet-derived exosomes, as a nanostructure for bio-compound delivery
600
Preparation and characterization of platinum nanoparticles immobilized in dihydrocinchonidine-modified montmorillonite and hectorite
601
Preparation and characterization of platinum/iron contained hydroxyapatite/carbon black composites
602
Preparation and Characterization of PLGA Microspheres Loaded by Cyclosporine-Cyclodextrin Complex
603
Preparation and Characterization of PLGA Nanoparticles Containing Plasmid DNA Encoding Human IFN-lambda-1/IL-29
604
Preparation and characterization of PLGA Nanoparticles containing recombinant core-NS3 Fusion protein of hepatitis C virus as a nano-vaccine candidate
605
PREPARATION AND CHARACTERIZATION OF PLGA NANOSPHERES ENCAPSULATED WITH AUTOCLAVED LEISHMANIA MAJOR (ALM) AND QUILLAJA SAPONIN
606
Preparation and characterization of PLGA nanospheres loaded with inactivated influenza virus, CpG-ODN and Quillaja saponin
607
Preparation and characterization of PLGA particles for subcutaneous controlled drug release by membrane emulsification
608
Preparation and characterization of PLLA/P(CL-b-LLA) blends by an in situ ring-opening polymerization
609
Preparation and characterization of PLT thick-films produced by a chemical route
610
Preparation and characterization of Pluronic/TPGS mixed micelles for solubilization of camptothecin
611
Preparation and characterization of PMMA/flaky aluminum composite particle in the presence of MPS
612
Preparation and characterization of PMMA–kaolinite intercalation composites
613
Preparation and characterization of P–Mo–V mixed oxide-incorporating mesoporous silica catalysts for selective oxidation of methane to formaldehyde Original Research Article
614
Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate
615
Preparation and characterization of poly (ethersulfone) nanofiltration membranes for amoxicillin removal from contaminated water
616
Preparation and characterization of poly (methyl methacrylate) and sulfonated poly (ether ether ketone) blend ultrafiltration membranes for protein separation applications
617
Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation
618
Preparation and characterization of poly (vinyl chloride)-blend-poly (carbonate) heterogeneous cation exchange membrane: Investigation of solvent type and ratio effects Original Research Article
619
Preparation and characterization of poly (vinylidene fluoride) ultrafiltration membrane with organic and inorganic porogens Original Research Article
620
Preparation and characterization of poly glycidyl methacrylete–zirconium dioxide–β-cyclodextrin composite matrix for separation of isoflavones through expanded bed adsorption
621
Preparation and characterization of poly(3,4-ethylenedioxythiophene) (PEDOT) using partially sulfonated poly(styrene-butadiene-styrene) triblock copolymer as a polyelectrolyte
622
Preparation and characterization of poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) composite thin films highly loaded with platinum nanoparticles
623
Preparation and characterization of poly(4-alkyltriphenylamine) by chemical oxidative polymerization
624
Preparation and characterization of poly(acrylic acid)-hydroxyethyl cellulose graft copolymer
625
Preparation and characterization of poly(acrylonitrile-acrylic acid-N-vinyl pyrrolidinone) terpolymer blended polyethersulfone membranes
626
Preparation and characterization of poly(amidoamine) dendrimers functionalized with a rhenium carbonyl complex and PEG as new IR probes for carbonyl metallo immunoassay
627
Preparation and characterization of poly(amidoxime) chelating resin from polyacrylonitrile grafted sago starch
628
Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite
629
Preparation and characterization of poly(ɛ-caprolactone) nonwoven mats via melt electrospinning
630
Preparation and characterization of poly(ɛ-caprolactone)-b-polyacrylonitrile (PCL-b-PAN) and poly(l-lactide)-b-polyacrylonitrile (PLLA-b-PAN) copolymers by aluminum and lithium alkoxides containing double-headed initiators
631
Preparation and characterization of poly(ether sulfone)/sulfonated poly(ether ether ketone) blend membranes
632
Preparation and characterization of poly(ethylene glycol)-crosslinked reacetylated chitosans
633
Preparation and characterization of poly(ethylene glycol)-g-chitosan with water- and organosolubility
634
Preparation and characterization of poly(glycidyl methacrylate) grafted from magnesium hydroxide particles via SI-ATRP
635
Preparation and characterization of poly(imide siloxane) (PIS)/titania(TiO2) hybrid nanocomposites by sol–gel processes
636
Preparation and characterization of poly(lactic acid)/starch composites toughened with epoxidized soybean oil
637
Preparation and characterization of poly(lactic acid)-grafted TiO2 nanoparticles with improved dispersions
638
Preparation and characterization of poly(lactic acid)–poly(ethylene glycol)–poly(lactic acid) (PLA–PEG–PLA) microspheres for controlled release of paclitaxel
639
Preparation and characterization of poly(l-phenylalanine) chiral stationary phases with varying peptide length
640
Preparation and Characterization of Poly-(methyl ethyl cyanoacrylate) Particles Containing 5-Aminosalicylic acid
641
Preparation and characterization of poly(methyl methacrylate)–clay nanocomposites via melt intercalation: Effect of organoclay on thermal, mechanical and flammability properties
642
Preparation and characterization of poly(methyl methacrylate-co-divinylbenzene) microcapsules containing phase change temperature adjustable binary core materials
643
Preparation and characterization of poly(methyltetradecylsiloxane) stationary phases immobilized by gamma radiation onto zirconized silica
644
Preparation and characterization of poly(MSMA-co-MMA)-TiO2/SiO2 nanocomposites using the colloidal TiO2/SiO2 particles via blending method
645
Preparation and characterization of poly(o-methoxyaniline)/Na+–MMT clay nanocomposite via emulsion polymerization: Electrochemical studies of corrosion protection
646
Preparation and Characterization of Poly(PEGMA) Modified Superparamagnetic Nanogels Used as Potential MRI Contrast Agents
647
Preparation and characterization of poly(phthalazinone ether sulfone ketone) hollow fiber ultrafiltration membranes with excellent thermal stability
648
Preparation and characterization of poly(piperazineamide) composite nanofiltration membrane by interfacial polymerization of 3,3′,5,5′-biphenyl tetraacyl chloride and piperazine
649
Preparation and characterization of poly(p-phenylene vinylene) Langmuir-Blodgett films formed via precursor method
650
Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation
651
Preparation and characterization of poly(sodium 4-styrenesulfonate)-decorated hydrophilic carbon black by one-step in situ ball milling
652
Preparation and characterization of poly(triallyl isocyanurate -co- trimethylolpropane triacrylate) monolith and its applications in the separation of small molecules by liquid chromatography
653
Preparation and characterization of poly(urea-formaldehyde) microcapsules filled with epoxy resins
654
Preparation and characterization of poly(var epsilon-caprolactone) polymer blends for the delivery of proteins
655
Preparation and Characterization of Poly(vinyl acetate)-Intercalated Graphite Oxide
656
Preparation and characterization of poly(vinyl alcohol)/graphite oxide nanocomposite
657
Preparation and characterization of poly(vinyl alcohol)/sodium alginate blended membrane for alkaline solid polymer electrolytes membrane
658
Preparation and characterization of poly(vinyl butyral) electrospun nanocomposite fibers reinforced with ultrasonically functionalized sepiolite
659
Preparation and characterization of poly(vinyl butyral) hollow fiber membrane via thermally induced phase separation with diluent polyethylene glycol 200 Original Research Article
660
Preparation and characterization of poly(vinyl chloride)/layered double hydroxide nanocomposites with enhanced thermal stability
661
Preparation and Characterization of Poly(Vinyl pyrrolidone)/Polyvinyl Chloride Coated Superparamagnetic Iron Oxide (Fe3O4) Nanoparticles for Biomedical Applications
662
Preparation and characterization of poly(vinylidene fluoride) (PVDF) based ultrafiltration membranes using nano γ-Al2O3
663
Preparation and characterization of poly(vinylidene fluoride) flat sheet membrane with Tg tunable amphiphilic terpolymer as membrane additive Original Research Article
664
Preparation and characterization of poly(ε-caprolactone)/Na+-MMT nanocomposites
665
Preparation and characterization of polyacrylamide/palygorskite
666
Preparation and characterization of polyacrylamide-intercalated graphite oxide
667
Preparation and characterization of polyacrylamide-modified kaolinite containing poly [acrylic acid-co-methylene bisacrylamide] nanocomposite hydrogels
668
Preparation and characterization of polyacrylic acid/karaya gum and polyacrylic acid/tamarind seed gum adducts and utilization in textile printing
669
Preparation and characterization of polyacrylic acid/karaya gum and polyacrylic acid/tamarind seed gum adducts and utilization in textile printing
670
Preparation and characterization of polyacrylonitrile membranes modified with polyelectrolyte deposition for separating similar sized proteins
671
Preparation and characterization of polyacrylonitrile ultrafiltration membranes
672
Preparation and characterization of polyacrylonitrile-based carbon fiber papers
673
Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment
674
Preparation and characterization of polyacrylonitrile-based membranes: Effects of internal coagulant on poly(acrylonitrileco-malefic acid) ultrafiltration hollow fiber membranes Original Research Article
675
Preparation and characterization of polyalkene membranes modified with four different ion-exchange groups by radiation-induced graft polymerization
676
Preparation and characterization of polyaluminum chloride containing high content of Al13 and active chlorine
677
Preparation and characterization of polyamide thin-film composite (TFC) membranes on plasma-modified polyvinylidene fluoride (PVDF)
678
Preparation and characterization of polyamide-urethane thin-film composite membranes Original Research Article
679
Preparation and Characterization of Polyamine-functionalized Mesoporous Silica
680
Preparation and characterization of polyaniline film on stainless steel by electrochemical polymerization as a counter electrode of DSSC
681
Preparation and characterization of polyaniline films in the presence of N-phenyl-1,4-phenylenediamine
682
Preparation and characterization of polyaniline micro/nanotubes with dopant acid mordant dark yellow GG
683
Preparation and characterization of polyaniline microrods synthesized by using dodecylbenzene sulfonic acid and periodic acid
684
Preparation and characterization of polyaniline nanoparticles synthesized from DBSA micellar solution
685
Preparation and characterization of polyaniline nanostructures via a interfacial polymerization method
686
Preparation and Characterization of Polyaniline/CaCO3 Composite and its Application as Anticorrosive Coating on Iron
687
Preparation and characterization of polyaniline/chitosan blend film
688
Preparation and characterization of polyaniline/manganese dioxide composites via oxidative polymerization: Effect of acids
689
Preparation and characterization of polyaniline/multi-walled carbon nanotube composites Original Research Article
690
Preparation and characterization of polyaniline/nano-Fe3O4 composites via a novel Pickering emulsion route
691
Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane
692
Preparation and Characterization of Polyaniline/Sb2O3 Nanocomposite and its Application for Removal of Pb(II) from Aqueous Media
693
Preparation and characterization of polybenzimidazole–clay hybrid materials
694
Preparation and characterization of polybenzoxazine/trisilanol polyhedral oligomeric silsesquioxanes composites
695
Preparation and characterization of polycaprolactone/forsterite nanocomposite porous scaffolds designed for bone tissue regeneration
696
Preparation and characterization of polycaprolactone-chitosan composites for tissue engineering applications
697
Preparation and characterization of poly-carboxymethyl-β-cyclodextrin superplasticizer
698
Preparation and characterization of polycrystalline anatase and rutile TiO2 thin films by rf magnetron sputtering
699
Preparation and characterization of polydimethylsiloxane/poly(vinylalcohol) coated solid phase microextraction fibers using sol–gel technology
700
Preparation and characterization of polydimethylsiloxane/poly(vinylalcohol) coated solid phase microextraction fibers using sol–gel technology
701
Preparation and characterization of polyelectrolyte complex membranes bearing alkyl side chains for the pervaporation dehydration of alcohols
702
Preparation and characterization of polyelectrolyte multilayer films containing in-situ synthesized nanoparticles of Cu(OH)2
703
Preparation and Characterization of Polyethersulfone Membrane Containing Zinc Oxide Nanoparticles and Polyvinylpyrrolidone
704
Preparation and characterization of polyethersulfone membranes for use in supercritical medium
705
Preparation and characterization of polyethersulfone membranes with p-toluenesulfonic acid and polyvinylpyrrolidone additives Original Research Article
706
Preparation and characterization of polyethersulfone microfiltration membranes by a 2-methoxyethanol additive Original Research Article
707
Preparation and characterization of polyethersulfone microporous membrane via thermally induced phase separation with low critical solution temperature system
708
Preparation and characterization of polyethyl-2-cyanoacrylate nanocapsules containing antiepileptic drugs
709
Preparation and characterization of polyethylene glycol/active carbon composites as shape-stabilized phase change materials
710
Preparation and characterization of polyethylene glycol-bis(N-methylimidazolium) dihydroxide as a basic phase-transfer catalyst and its application in Knoevenagel condensation under aqueous media
711
Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method
712
Preparation and characterization of polyethylene-based hybrid particles by an environmentally-friendly and aqueous solvent evaporation method
713
Preparation and characterization of polyethyleneimine modified ion-exchanger based on poly(methacrylate-co-ethylene dimethacrylate) monolith
714
Preparation and characterization of polygalacturonic acid/rosmarinic acid membrane crosslinked by short chain hyaluronate for preventing postoperative abdominal adhesion
715
Preparation and characterization of polyimide/mesoporous silica hybrid nanocomposites based on water-soluble poly(amic acid) ammonium salt
716
Preparation and characterization of polyimide/organoclay nanocomposites
717
Preparation and characterization of polyimide–silica hybrid membranes on kieselguhr–mullite supports
718
Preparation and characterization of polyindole nanofibers by electrospinning method
719
Preparation and characterization of polyisoprenes and polybutadienes having 1,2- and 3,4-linkages preferentially
720
Preparation and characterization of polyketone (PK) fibrous membrane via electrospinning
721
Preparation and characterization of polylactide/thermoplastic konjac glucomannan blends
722
Preparation and characterization of polymer coated superparamagnetic magnetite nanoparticle agglomerates Original Research Article
723
Preparation and characterization of polymer composites of polyaniline with poly(vinyl chloride) and polystyrene
724
Preparation and characterization of polymer layer systems for validation of 3D Micro X-ray fluorescence spectroscopy
725
Preparation and characterization of polymer layer systems for validation of 3D Micro X-ray fluorescence spectroscopy
726
Preparation and characterization of polymer/layered silicate pharmaceutical nanobiomaterials using high clay load exfoliation processes
727
Preparation and characterization of polymer-capped CdS nanocrystals Original Research Article
728
Preparation and characterization of polymer-dispersed liquid crystal (PDLC) with different cation exchange capacity (CEC) clays Original Research Article
729
Preparation and characterization of polymeric coatings with combined nitric oxide release and immobilized active heparin
730
Preparation and characterization of polymeric electrolytes constituted by poly(ethylene oxide), sol–gel silica and lithium perchlorate
731
Preparation and characterization of polymeric plasticized membranes (PPM) embedding a crown ether carrier application to copper ions transport
732
Preparation and characterization of polymer–zeolite nanocomposite membranes
733
Preparation and characterization of polymethylmethacrylate/aligned SWCNT composites with by repeated stretching
734
Preparation and Characterization of Polynuclear Manganese(III) Complexes with SalbnH2,N,N-Disalicylidene-1,4-diaminobutane
735
Preparation and characterization of polyoxometalate-modified carbon nanosheets Original Research Article
736
Preparation and characterization of polyphosphotungstate/ZrO2 nanocomposite and their sonocatalytic and photocatalytic activity under UV light illumination
737
Preparation and characterization of polyphosphotungstate/ZrO2 nanocomposite and their sonocatalytic and photocatalytic activity under UV light illumination
738
Preparation and characterization of polypiperazine amide/PPESK hollow fiber composite nanofiltration membrane
739
Preparation and characterization of polypropylene/layered silicate nanocomposites using an antioxidant
740
Preparation and characterization of polypropylene–wheat straw–clay composites
741
Preparation and characterization of polypyrrole, N-substituted with liquid crystalline moieties
742
Preparation and characterization of polypyrrole/nano-SrFe12O19 composites by in situ polymerization method
743
Preparation and characterization of polysaccharides/PVA blend nanofibrous membranes by electrospinning method
744
Preparation and characterization of polysaccharidic microbeads by a microfluidic technique: Application to the encapsulation of Sertoli cells
745
Preparation and characterization of polyseudorotaxanes based on adamantane-modified polybenzoxazines and β-cyclodextrin
746
Preparation and characterization of poly-silicic-cation coagulant from industrial wastes Original Research Article
747
Preparation and characterization of polysiloxane-poly(butyl acrylate–styrene) composite latices and their film properties
748
Preparation and characterization of polystyrene films containing PbS nanoparticles
749
Preparation and characterization of polystyrene/graphite composite prepared by cationic grafting polymerization
750
Preparation and characterization of polystyrene-b-poly(2-vinylpyridine) coordinated to metal or metal ion nanoparticles
751
Preparation and characterization of polystyrene-b-poly(2-vinylpyridine) coordinated to metal or metal ion nanoparticles
752
Preparation and characterization of polystyrene–poly(p-acetoxystyrene) and polystyrene–poly(p-vinylphenol) composite latex particles
753
Preparation and Characterization of Polystyrene-Silver NanocompositeUsing MicroemulsionMethod and its Antibacterial Activity
754
Preparation and characterization of polysulfone and modified poly isobutylene-alt-maleic anhydride blend NF membrane Original Research Article
755
Preparation and Characterization of Polysulfone Based Hollow Fibre Composite Membranes for Water Purification
756
Preparation and characterization of polysulfone mixed matrix membrane incorporated with palladium nanoparticles in the inversed microemulsion for hydrogen separation
757
Preparation and Characterization of Polysulfone/Polyphenylsulfone/Titanium Dioxide Composite Ultrafiltration Membranes for Palm Oil Mill Effluent Treatment
758
Preparation and characterization of polysulfone/β-cyclodextrin polyurethane composite nanofiltration membranes
759
Preparation and characterization of polythiophene/molybdenum disulfide intercalation material
760
Preparation and characterization of polyurea microcapsules with different diamines
761
Preparation and characterization of polyurea microcapsules containing colored electrophoretic responsive fluid
762
Preparation and characterization of polyurethane foams using a palm oil-based polyol
763
Preparation and characterization of polyurethane/poly(vinylidene fluoride) composites and evaluation as polymer electrolytes
764
Preparation and characterization of polyvinyl acetate/zeolite 4A mixed matrix membrane for gas separation
765
Preparation and characterization of polyvinyl alcohol hydrogels crosslinked by biodegradable polyurethane for tissue engineering of cartilage
766
Preparation and characterization of polyvinyl alcohol/chitosan blended membrane for alkaline direct methanol fuel cells
767
Preparation and characterization of polyvinyl alcohol–cobalt ferrite nanocomposites
768
Preparation and characterization of polyvinyl alcohol–piperic acid composite film for potential food packaging applications
769
Preparation and characterization of polyvinyl chloride based nanocomposite nanofiltration-membrane modified by iron oxide nanoparticles for lead removal from water
770
Preparation and characterization of polyvinyl chloride/styrene butadiene rubber blend heterogeneous cation exchange membrane modified by potassium perchlorate Original Research Article
771
Preparation and characterization of polyvinylchloride based mixed matrix membrane filled with multi walled carbon nano tubes for carbon dioxide separation
772
Preparation and characterization of polyvinylidene fluoride hollow fiber membranes for ultrafiltration
773
Preparation and characterization of porous Ag doped hydroxyapatite bioceramic scaffolds
774
Preparation and characterization of porous alumina ceramics through starch consolidation casting technique
775
Preparation and characterization of porous alumina–zirconia composite ceramics
776
Preparation and characterization of porous anion-exchange membrane adsorbers with high protein-binding capacity
777
Preparation and characterization of porous biodegradable microspheres used for controlled protein delivery
778
Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites Original Research Article
779
Preparation and characterization of porous carbon material-coated solid-phase microextraction metal fibers
780
Preparation and characterization of porous carbons from PAN-based preoxidized cloth by KOH activation Original Research Article
781
Preparation and Characterization of Porous Ce1-xLaxO2-δ
782
Preparation and characterization of porous C-modified anatase titania films with visible light catalytic activity
783
Preparation and characterization of porous conducting poly(dl-lactide) composite membranes
784
Preparation and characterization of porous cross linked laccase aggregates for the decolorization of triphenyl methane and reactive dyes
785
Preparation and characterization of porous crosslinked collagenous matrices containing bioavailable chondroitin sulphate
786
Preparation and characterization of porous DVB copolymers and their applicability for adsorption (solid-phase extraction) of phenol compounds
787
Preparation and characterization of porous fibrous mullite bodies doped with TiO2
788
Preparation and characterization of porous hollow silica nanoparticles for drug delivery application
789
Preparation and characterization of porous hydroxyapatite through polymeric sponge method
790
Preparation and characterization of porous MgO and NiO/MgO nanocomposites Original Research Article
791
Preparation and characterization of porous microfiltration membranes by using tailor-made propylene/1-octadecene copolymers Original Research Article
792
Preparation and characterization of porous Nb2O5 nanoparticles
793
Preparation and characterization of porous polyacrylonitrile membranes for lithium-ion polymer batteries
794
Preparation and characterization of porous polysucrose microspheres
795
Preparation and characterization of porous silica templated by a nonionic fluorinated systems
796
Preparation and Characterization of Porous Silicon Powder
797
Preparation and characterization of porous ultrafine Fe2O3 particles
798
Preparation and Characterization of Porous Yttrium Oxide Powders with High Specific Surface Area
799
Preparation and characterization of porous β-tricalcium phosphate/collagen composites with an integrated structure
800
Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure
801
Preparation and characterization of porphyrin chromophores immobilized on micro-silica gel beads
802
Preparation and characterization of positive electrode of Ni–MH batteries with cobalt additives
803
Preparation and characterization of powders and thin films of Bi2AlNbO7 and Bi2InNbO7 pyrochlore oxides
804
Preparation and characterization of PPEES/chitosan composite nanofiltration membrane Original Research Article
805
Preparation and characterization of PPSU/PBNPI blend membrane for hydrogen separation
806
Preparation and characterization of Ppy/Al2O3/Al used as a solid-state capacitor
807
Preparation and characterization of Ppy/Al2O3/Al used as solid-state capacitors for microsystems—Effect of amount of electricity passed
808
Preparation and characterization of Pr1−xSrxFeO3 cathode material for intermediate temperature solid oxide fuel cells
809
Preparation and characterization of praseodymium calcium manganate
810
Preparation and characterization of pre-silane modified ethyl cellulose-based microcapsules containing linseed oil
811
Preparation and characterization of processable electroactive polyaniline–polyvinyl alcohol composite
812
Preparation and characterization of protein from heat-stabilized rice bran using hydrothermal cooking combined with amylase pretreatment Original Research Article
813
Preparation and characterization of proton conducting polysulfone grafted poly(styrene sulfonic acid) polyelectrolyte membranes
814
Preparation and characterization of proton implanted indium tin oxide selective gas sensors
815
Preparation and characterization of proton-conducting CsHSO4–SiO2 nanocomposite electrolyte membranes
816
Preparation and characterization of proton-conducting sulfonated poly(ether ether ketone)/phosphatoantimonic acid composite membranes
817
Preparation and characterization of prototypes for multi-modal separation aimed for capture of positively charged biomolecules at high-salt conditions
818
Preparation and characterization of prototypes for multi-modal separation media aimed for capture of negatively charged biomolecules at high salt conditions
819
Preparation and characterization of Prussian blue nanowire array and bioapplication for glucose biosensing Original Research Article
820
Preparation and characterization of Pseudomonas putida esterase immobilized on magnetic nanoparticles
821
Preparation and characterization of PSf hollow fiber membrane from PSf–HBPE–PEG400–NMP dope solution
822
Preparation and characterization of PSf/clay nanocomposite membranes with LiCl as a pore forming additive Original Research Article
823
Preparation and characterization of PSf/clay nanocomposite membranes with PEG 400 as a pore forming additive Original Research Article
824
Preparation and Characterization of PSi/Si Electrochemically Formed as Photodetectors
825
Preparation and characterization of PSSA/PVA catalytic membrane for biodiesel production
826
Preparation and characterization of Pt direct deposition on polypyrrole modified Nafion composite membranes for direct methanol fuel cell applications
827
Preparation and characterization of Pt nanoparticles supported on modified graphite nanoplatelet using solution blending method
828
Preparation and characterization of Pt particles in unidimensional microporous supports Original Research Article
829
Preparation and characterization of Pt/C and Ptsingle bondRu/C electrocatalysts for direct ethanol fuel cells
830
Preparation and characterization of Pt/HMFI–SBA-15 hybrid catalyst for tetralin transformation
831
Preparation and characterization of Pt/ZnO-Cr2O3 catalyst for low-temperature dehydrogenation of isobutane Original Research Article
832
Preparation and characterization of PtAu hybrid film modified electrodes and their use in simultaneous determination of dopamine, ascorbic acid and uric acid
833
Preparation and characterization of Pt-CeO2 and Pt-Pd electrocatalysts for the oxygen reduction reaction in the absence and presence of methanol in alkaline medium
834
Preparation and characterization of p-tert-butylcalix[8]arene bonded capillaries for open-tubular capillary electrochromatography Original Research Article
835
Preparation and characterization of PTFE based composite anion exchange membranes for alkaline fuel cells
836
Preparation and characterization of Pt-polypyrrole nanocomposite for electrochemical reduction of oxygen
837
Preparation and characterization of PtSn/C anode electrocatalysts for direct ethanol fuel cell
838
Preparation and characterization of Pt-supported porous graphite nanofibers
839
Preparation and characterization of p-type hydrogenated amorphous silicon oxide film and its application to solar cell
840
Preparation and characterization of p-type transparent conducting tin-gallium oxide films
841
Preparation and characterization of pullulan–chitosan and pullulan–carboxymethyl chitosan blended films
842
Preparation and Characterization of Pullulan-Soy Protein Concentrate Biocomposite Film
843
Preparation and Characterization of Pullulan-Soy Protein Concentrate Biocomposite Film
844
Preparation and Characterization of Pullulan-Soy Protein Concentrate Blended Film Incorporated With Zataria multiflora and Artemisia biennis Essential Oils
845
Preparation and characterization of pulsed laser deposited CdTe thin films at higher FTO substrate temperature and in Ar + O2 atmosphere
846
Preparation and characterization of pulsed laser deposition (PLD) SiC films
847
Preparation and characterization of PuN pellets containing ZrN and TiN
848
Preparation and characterization of pure anatase nanocrystals by sol–gel method
849
Preparation and characterization of pure polyacrylate polymer colloid through emulsion polymerization using a novel initiator
850
Preparation and characterization of PVA/PAA membranes for solid polymer electrolytes
851
Preparation and characterization of PVA–I complex doped mesoporous TiO2 by hydrothermal method
852
Preparation and characterization of PVC based heterogeneous ion exchange membrane coated with Ag nanoparticles by (thermal-plasma) treatment assisted surface modification
853
Preparation and characterization of PVC/NiFe2O4/Fe2O3 composite: Catalytic activity for synthesis of Arylidene Barbituric acid derivatives
854
Preparation and characterization of PVC/PMMA blend polymer electrolytes complexed with LiN(CF3SO2)2
855
Preparation and Characterization of PVC-Al2O3-LiClO4 Composite Polymeric Electrolyte
856
Preparation and characterization of PVDF/CaCO3 composites
857
Preparation and characterization of PVDF/TiO2 hybrid membranes with different dosage of nano-TiO2
858
Preparation and characterization of PVDF/TiO2 hybrid membranes with ionic liquid modified nano-TiO2 particles
859
Preparation and characterization of PVDF/TiO2 mixed matrix membrane via in situ colloidal precipitation method Original Research Article
860
Preparation and characterization of PVDF/TiO2 organic–inorganic composite membranes for fouling resistance improvement
861
Preparation and characterization of PVDF–HFP copolymer hollow fiber membranes for membrane distillation Original Research Article
862
Preparation and characterization of PVDF–HFP microporous flat membranes by supercritical CO2 induced phase separation
863
Preparation and characterization of PVDF-P(PEGMA-r-MMA) ultrafiltration blend membranes via simplified blend method Original Research Article
864
Preparation and characterization of PVDF–PFSA blend hollow fiber UF membrane
865
Preparation and characterization of PVDF–SiO2 composite hollow fiber UF membrane by sol–gel method
866
Preparation and Characterization of PVDF-TiO2 Composite Membranes Blended with Different Mw of PVP for Oily Wastewater Treatment using Submerged Membrane System
867
Preparation and characterization of pyrazoline nanoparticles
868
Preparation and characterization of pyrochlore oxide Y2Ti2O7 nanocrystals via gel-combustion route
869
Preparation and characterization of pyrolytic chars from different biomass samples
870
Preparation and characterization of pyrolytic chars from different biomass samples
871
Preparation and characterization of PZT thin films deposited by pulsed laser deposition on template layer
872
Preparation and characterization of quaternary ammonium functionalized poly(2,6-dimethyl-1,4-phenylene oxide) as anion exchange membrane for alkaline polymer electrolyte fuel cells
873
Preparation and characterization of quaternized poly(phthalazinone ether sulfone ketone) NF membranes
874
Preparation and characterization of quercetin-loaded solid lipid microparticles for pulmonary delivery
875
Preparation and characterization of radiation-grafted poly (tetrafluoroethylene-co-perfluoropropyl vinyl ether) membranes for alkaline anion-exchange membrane fuel cells
876
Preparation and characterization of radical and pH-responsive chitosan–gallic acid conjugate drug carriers
877
Preparation and characterization of raloxifene nanoparticles using Rapid Expansion of Supercritical Solution (RESS)
878
Preparation and characterization of Raman–Dincer crude oil derived pitches for production of stabilized fibers
879
Preparation and Characterization of Rare Earth Composite Materials Radiating Far Infrared for Activating Liquefied Petroleum Gas
880
Preparation and characterization of rare earth fluorescent anti-counterfeiting fiber via sol-gel method
881
Preparation and characterization of rare earth orthoborates, LnBO3 (Ln = Tb, La, Pr, Nd, Sm, Eu, Gd, Dy, Y) and LaBO3:Gd, Tb, Eu by metathesis reaction: ESR of LaBO3:Gd and luminescence of LaBO3:Tb, Eu
882
Preparation and Characterization of Rare Earth Rhenium Oxides Ln6ReO12, Ln=Ho, Er, Tm, Yb, Lu
883
Preparation and characterization of rare earth-containing layered double hydroxides Original Research Article
884
Preparation and Characterization of Red Luminescent Ca0.8Zn0.2TiO3: Pr3+, Na+ Nanophosphor
885
Preparation and characterization of red mud sintered porous materials for water defluoridation
886
Preparation and characterization of red porcelain tiles with hematite tailings
887
Preparation and Characterization of Reduced Graphene Oxide Doped in Sol-Gel Derived Silica for Application in Electrochemical Double-Layer Capacitors
888
Preparation and characterization of reference fluid mimicking behavior of North Sea heavy crude oil
889
Preparation and characterization of regenerated cellulose/poly (vinylidene fluoride) (PVDF) blend films
890
Preparation and characterization of regenerated fiber from the aqueous solution of Bombyx mori cocoon silk fibroin
891
Preparation and characterization of resin-derived carbon foams reinforced by hollow ceramic microspheres
892
Preparation and characterization of resistant starch III from elephant foot yam (Amorphophallus paeonifolius) starch
893
Preparation and characterization of reticular SSC cathode films by electrostatic spray deposition
894
Preparation and Characterization of Retinoic Acidic Loaded Nanoparticles for Cancer Therapy
895
Preparation and characterization of RGD-immobilized chitosan scaffolds
896
Preparation and characterization of rhenium (I) tricarbonyl dithiocarbamate compounds; Re(CO)3(S2CNMe2)(L)
897
Preparation and characterization of rhenium(I) compounds with amino ester derivatized diimine ligands. Investigations of luminescence. Crystal structures of Re(CO)3Cl(pyca-β-Ala-OEt) and Re(CO)3Cl(pyca-l-Asp(OMe)-OMe)
898
Preparation and characterization of rhenium(I) dicarbonyl complexes based on the meridionally-coordinated terpyridine ligand
899
Preparation and characterization of Rhodamine B and Alq3 thin films deposited by solution jet beam method
900
Preparation and characterization of rhodium(III), iridium(III) and ruthenium(II) bearing 1,3- or 1,4-dithianes
901
Preparation and characterization of rifampicin-PLGA microspheres/sodium alginate in situ gel combination delivery system
902
Preparation and Characterization of Rifampin Loaded Mesoporous Silica Nanoparticles as a Potential System for Pulmonary Drug Delivery
903
Preparation and characterization of rigid polyurethane foam prepared from sugar-cane bagasse polyol
904
Preparation and characterization of rigid polyurethane–polyglycerol nanocomposite foams
905
Preparation and Characterization of Rivastigmine Transdermal Patch Based on Chitosan Microparticles
906
Preparation and characterization of rod-shaped MnO2 crystal
907
Preparation and characterization of Ru/MgO-Al2O3 catalysts for methane steam reforming
908
Preparation and characterization of rubidium–β-alumina by the gel-to-crystallite conversion method
909
Preparation and characterization of RuO2/polypyrrole electrodes for supercapacitors
910
Preparation and characterization of ruthenium oxide/hexacyanoferrate and ruthenium hexacyanoferrate mixed films and their electrocatalytic properties
911
Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group
912
Preparation and characterization of ruthenium-doped polypyrrole composites for supercapacitor
913
Preparation and characterization of ruthenium-doped polypyrrole composites for supercapacitor
914
Preparation and characterization of rutile TiO2 thin films by mist plasma evaporation
915
Preparation and Characterization of Salbutamol Sulphate Loaded Ethyl Cellulose Microspheres using Water-in-Oil-Oil Emulsion Technique
916
Preparation and characterization of Samaria nanofibers by electrospinning
917
Preparation and characterization of saponified delignified cellulose polyacrylonitrile-graft copolymer
918
Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment
919
Preparation and characterization of Sb-doped SnO2 films with controlled stoichiometry from polymeric precursors Original Research Article
920
Preparation and characterization of Sb-doped SnO2 thin films from colloidal precursors
921
Preparation and characterization of scandia and Re doped tungsten matrix impregnated cathode Original Research Article
922
Preparation and Characterization of Schiff Base Polythioamides Derived from [4,4 -Methylenebis (cinnamaldehyde)] by Willgerodt-Kindler Reaction
923
Preparation and characterization of S-doped TiO2 nanoparticles, effect of calcination temperature and evaluation of photocatalytic activity
924
Preparation and characterization of selenite substituted hydroxyapatite
925
Preparation and characterization of self assembled monolayers of 2-mercaptonicotinic acid on Au(1 1 1)
926
Preparation and characterization of self-aggregated nanoparticles of cholesterol-modified O-carboxymethyl chitosan conjugates
927
Preparation and characterization of self-assembled alkanephosphate monolayers on glass substrate coated with nano-TiO2 thin film
928
Preparation and characterization of self-assembled nanoparticles of 6-O-cholesterol-modified chitosan for drug delivery
929
Preparation and characterization of self-assembled nanoparticles of the novel carboxymethyl pachyman-deoxycholic acid conjugates
930
Preparation and characterization of self-assembled nanoparticles of the novel carboxymethyl pachyman-deoxycholic acid conjugates
931
Preparation and characterization of self-assembly organic multilayer films on silica surface
932
Preparation and characterization of self-emulsified waterborne nitrocellulose
933
Preparation and characterization of semiconducting Zn1−xCdxSe thin films
934
Preparation and characterization of semi-conductive poly(vinylidene fluoride)/polyaniline blends and membranes
935
Preparation and characterization of semi-crystalline poly(ether ether ketone) hollow fiber membranes
936
Preparation and characterization of sensing membranes for the detection of glucose, lactate and tyramine in microtiter plates
937
Preparation and characterization of sericin powder extracted from silk industry wastewater
938
Preparation and characterization of shape memory polymer networks based on carboxylated telechelic poly(ɛ-caprolactone)/epoxidized natural rubber blends
939
Preparation and characterization of shuttle-like α-Fe2O3 nanoparticles by supermolecular template
940
Preparation and characterization of Si3N4/(W, Ti)C nano-composite ceramic tool materials
941
Preparation and characterization of Si3N4/SBR nanocomposites with high performance
942
Preparation and characterization of Si3N4/TiN nanocomposites ceramic tool materials
943
Preparation and characterization of SiC microtubes Original Research Article
944
Preparation and characterization of SiC nanowires and nanoparticles from filter paper by sol–gel and carbothermal reduction processing
945
Preparation and characterization of SiC/C and C/SiC/C composites using pulse chemical vapor infiltration process
946
Preparation and characterization of SiC/C and C/SiC/C composites using pulse chemical vapor infiltration process
947
Preparation and characterization of SiC/cordierite composite porous ceramics
948
Preparation and characterization of silica composite xerogels with broadband absorption in mid- and far-infrared windows
949
Preparation and characterization of silica-carbon hybrids Original Research Article
950
Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids
951
Preparation and characterization of silica-coated iron-oxide bionanoparticles under N2 gas
952
Preparation and characterization of silica-coated TiO2 nanoparticle
953
Preparation and characterization of silica-doped aluminum nitride–aluminum nitride polytypoid composites
954
Preparation and Characterization of Silica-Fiber / Aeroger Composite Heat Insulations
955
Preparation and characterization of silicalite-1 membrane by counter-diffusion secondary growth
956
Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes
957
Preparation and characterization of silica–silver core-shell structural submicrometer spheres Original Research Article
958
Preparation and characterization of silica-supported, group IB–Pd bimetallic catalysts prepared by electroless deposition methods
959
Preparation and characterization of siliceous material using liposomes as template
960
Preparation and characterization of silicon carbide fibers from activated carbon fibers Original Research Article
961
Preparation and characterization of silicon nanowires catalyzed by aluminum
962
Preparation and characterization of silicon nitride hollow fiber membranes for seawater desalination
963
Preparation and characterization of silicon oil based ferrofluid
964
Preparation and characterization of silicon-substituted hydroxyapatite coating by a biomimetic process on titanium substrate
965
Preparation and Characterization of Silk Fibroin Nanoparticles as a Potential Drug Delivery System for 5-Fluorouracil
966
Preparation and characterization of silk/silica hybrid biomaterials by sol–gel crosslinking process
967
Preparation and characterization of siloxane composite membranes for n-butanol concentration from ABE solution by pervaporation
968
Preparation and characterization of silver containing semiconducting ceramics
969
Preparation and characterization of silver nanoparticles by chemical reduction method
970
Preparation and characterization of silver nanoparticles using surian (Toona sinensis) leaf extract and the wound healing efficacy in mice
971
Preparation and characterization of silver thiocyanate – tetrabromo-tetrachlorofluorescein inclusion material and its adsorption to synthetic dye
972
Preparation and characterization of silver-filled polyester matrix composites
973
Preparation and characterization of silver-modified La0.8Sr0.2MnO3 cathode powders for solid oxide fuel cells by chemical reduction method
974
Preparation and characterization of silylated graphite oxide Original Research Article
975
Preparation and characterization of silylated-magadiites
976
Preparation and characterization of single crystalline In2O3 films deposited on MgO (110) substrates by MOCVD
977
Preparation and characterization of single crystals of intercalation compounds CuxTiS2
978
Preparation and characterization of single-crystalline barium strontium titanate nanocubes via solvothermal method
979
Preparation and characterization of single-crystalline bismuth nanowires by a low-temperature solvothermal process
980
Preparation and characterization of single-hole macroporous organogel particles of high toughness and superfast responsivity
981
Preparation and characterization of single-phase SiC nanotubes and C-SiC coaxial nanotubes
982
Preparation and characterization of sintered ceramics made with spent foundry olivine sand and clay Review Article
983
Preparation and characterization of sintered molybdenum doped with MoSi2/La2O3/Y2O3 composite particle
984
Preparation and characterization of SiO2/6H–SiC metal–insulator–semiconductor structure using TEOS as source material
985
Preparation and characterization of SiO2/CMC/Ag hybrids with antibacterial properties
986
Preparation and characterization of SiO2/polydopamine/Ag nanocomposites with long-term antibacterial activity
987
Preparation and characterization of SiO2/TiO2 composite microspheres with microporous SiO2 core/mesoporous TiO2 shell
988
Preparation and characterization of SiO2/TiO2 core-shell particles with controlled shell thickness
989
Preparation and characterization of SiO2/ZrO2/Ag multicoated microspheres
990
Preparation and characterization of six calixarene bonded stationary phases for high performance liquid chromatography
991
Preparation and characterization of slice-like Cu2(OH)3NO3 superhydrophobic structure on copper foil
992
Preparation and characterization of SLNs (W/O/W type) contained lipoic acid PEG ester by variation lipid
993
Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells
994
Preparation and Characterization of Small Silica-Supported Iridium Particles from Iridium Trisacetylacetonate Precursor
995
Preparation and characterization of SnO nanowhiskers
996
Preparation and characterization of SnO2 and Cu-doped SnO2 thin films using electrostatic spray deposition (ESD)
997
Preparation and characterization of SnO2 and WOx–SnO2 nanosized powders and thick films for gas sensing
998
Preparation and Characterization of SnO2 Nanoparticles by Hydrothermal Route
999
Preparation and characterization of SnO2 nanoparticles in aqueous solution of [EMIM][EtSO4] as a low cost ionic liquid using ultrasonic irradiation
1000
Preparation and characterization of SnO2 nanoparticles of enhanced thermal stability: The effect of phosphoric acid treatment on SnO2·nH2O