Title List مقالات لاتين Mechanical behaviour of NiTi parts prepared by powder metallurgical methods Mechanical properties and wear behavior of Al–2 wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion

بر اساس عنوان

1

Mechanical behaviour of NiTi parts prepared by powder metallurgical methods

2

Mechanical behaviour of nitrogen-alloyed austenitic stainless steel hardened by warm rolling

3

Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates

4

Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

5

MECHANICAL BEHAVIOUR OF OIL PALM KERNELS (ELAEIS GUINEENSIS)

6

Mechanical behaviour of pine wood chemically modified with a homologous series of linear chain carboxylic acid anhydrides

7

Mechanical behaviour of pitting corrosion of flexural and shear reinforcement and its effect on structural reliability of corroding RC beams

8

Mechanical behaviour of polyethylene terephthalate & polyethylene naphthalate fibres under cyclic loading

9

Mechanical behaviour of polymer modified mortars

10

Mechanical behaviour of polymer modified mortars

11

Mechanical behaviour of polymer modified mortars

12

Mechanical behaviour of porous hydroxyapatite

13

Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slags

14

Mechanical behaviour of pressed and sintered CP Ti and Ti–6Al–7Nb alloy obtained from master alloy addition powder

15

Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders

16

Mechanical behaviour of pressed and sintered titanium alloys obtained from prealloyed and blended elemental powders

17

Mechanical behaviour of pultruded glass fibre reinforced polymer composites at elevated temperature: Experiments and model assessment

18

Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate

19

Mechanical behaviour of sand-geotextile interface

20

Mechanical behaviour of self-piercing riveted multi-layer joints under different specimen configurations

21

Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion

22

Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion

23

Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion

24

Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension

25

Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension

26

Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension

27

Mechanical behaviour of SiC reinforced aluminium thin walled tube under combined axial and torsional loading

28

Mechanical behaviour of similar and dissimilar AA5182-H111 and AA6016-T4 thin friction stir welds

29

Mechanical behaviour of steel pipes reinforced with composite materials and steel

30

Mechanical behaviour of strain hardening cement-based composites under impact loading

31

Mechanical behaviour of synthetic surgical meshes: Finite element simulation of the herniated abdominal wall

32

Mechanical behaviour of Textile Concrete under accelerated ageing conditions

33

Mechanical behaviour of textile-reinforced thermoplastics with integrated sensor network components

34

Mechanical behaviour of the constituents inside carbon-fibre/carbon-silicon carbide composites characterised by nano-indentation

35

Mechanical behaviour of the ITER toroidal field model coil (TFMC) in the single coil test

36

Mechanical behaviour of the T91 martensitic steel under monotonic and cyclic loadings in liquid metals

37

Mechanical behaviour of the upper layers of a sandy loam soil under shear loading

38

Mechanical behaviour of the ءrnes and Hestfjall Faults of the June 2000 earthquakes in Southern Iceland: inferences from surface traces and tectonic model

39

Mechanical behaviour of tube-woven Kagome truss cores under compression

40

Mechanical behaviour of tube-woven Kagome truss cores under compression

41

Mechanical behaviour of unsaturated marine sediments: experimental and theoretical approaches

42

Mechanical behaviour of various mortars made by combined fly ash and limestone in Moroccan Portland cement

43

Mechanical behaviour of vinyl plastisols with cellulosic fillers. Analysis of the interface between particles and matrices

44

Mechanical behaviour of Walnut reinforced composite

45

Mechanical behaviour of W–S–N and W–S–C sputtered coatings deposited with a Ti interlayer

46

Mechanical behaviour of yttria tetragonal zirconia polycrystalline nanoceramics: dependence on the glassy phase content

47

Mechanical behaviour of Zn–Fe alloy coated mild steel

48

Mechanical behaviour of Zr-La-Cu-Ni-Al glass-based composites

49

Mechanical behaviour of Σ3 boundaries in Ni3Al Original Research Article

50

Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores

51

Mechanical behaviours of magnetoelastic interaction for superconducting helical magnets

52

Mechanical biocompatibilities of titanium alloys for biomedical applications

53

Mechanical bioeffects of acoustic droplet vaporization in vessel-mimicking phantoms

54

Mechanical bioeffects of acoustic droplet vaporization in vessel-mimicking phantoms

55

Mechanical biological treatment of organic fraction of MSW affected dissolved organic matter evolution in simulated landfill

56

Mechanical Bioprosthesis

57

Mechanical blood-tissue interaction in contracting muscles: a model study

58

Mechanical boundary conditions of fracture healing: borderline indications in the treatment of unreamed tibial nailing

59

Mechanical bowel preparation before colorectal surgery?

60

Mechanical bowel preparation for elective colorectal surgery: a multicentre randomised trial

61

Mechanical bowel preparation with different solutions in rats with selective left colonic ischemia and reperfusion injury

62

Mechanical braking system for the pulsed power supply system of ASDEX Upgrade

63

Mechanical breakdown of trabecular bone: Dependence on microstructure

64

Mechanical bridge to recovery in fulminant myocarditis

65

Mechanical bridge to transplantation: When is too early? When is too late?

66

Mechanical bruising of young coconut

67

MECHANICAL BRUISING TO STRAWBERRY CAUSED BY VIBRATIONAL EQUIPMENT

68

Mechanical Buckling Analysis of Composite Annular Sector Plate with Bean-Shaped Cut-Out using Three Dimensional Finite Element Method

69

Mechanical Buckling of Circular Orthotropic Bilayer Nanoplate Embedded in an Elastic Matrix under Radial Compressive Loading

70

Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field

71

Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators

72

Mechanical buckling of functionally graded material cylindrical shells surrounded by Pasternak elastic foundation

73

Mechanical buckling of multi-walled carbon nanotubes: The effects of slenderness ratio

74

Mechanical Bus for Modular Product Design

75

Mechanical cardiac support 2000: current applications and future trial design: June 15–16, 2000 Bethesda, Maryland

76

Mechanical cell disruption for lipid extraction from microalgal biomass

77

Mechanical Changes after Histamine Activation of Intact Single Vascular Smooth Muscle Cells

78

Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation

79

Mechanical characterisation of a glass/polyester sandwich structure for marine applications

80

Mechanical characterisation of a viscoplastic material sensitive to hydrostatic pressure

81

Mechanical characterisation of AA7015 aluminium alloy reinforced with ceramics

82

Mechanical characterisation of AlSi-hBN, NiCrAl-Bentonite, and NiCrAl-Bentonite-hBN freestanding abradable coatings

83

Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres

84

Mechanical characterisation of filler sandcretes with rice husk ash additions: Study applied to Senegal

85

Mechanical characterisation of fusion materials by indentation test

86

Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion

87

Mechanical characterisation of interpenetrating network metal–ceramic composites

88

Mechanical characterisation of laser surface alloyed aluminium–copper systems

89

Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications

90

Mechanical characterisation of mullite-based ceramic matrix composites at test temperatures up to 1200°C

91

Mechanical characterisation of polyurethane elastomer for biomedical applications

92

Mechanical characterisation of powders using nanoindentation

93

Mechanical characterisation of Textile Ceramic plates. Testing on elastic foundations

94

Mechanical characterisation of the dynamic tensile properties of CFRP sheet and adhesive at medium strain rates

95

Mechanical Characterisation of the Effect of Various Forming Processes Applied to Commercially Pure Titanium

96

Mechanical characterisation of traditional adobes from the north of Spain

97

Mechanical characterisation of unidirectional and cross-directional multilayered urinary bladder matrix (UBM) scaffolds

98

Mechanical characterisation of wooden structures by means of an in situ penetration test

99

Mechanical characterisation of γ-TiAl thin films obtained by two different sputtering routes

100

Mechanical characterisation of γ-TiAl thin films obtained by two different sputtering routes

101

Mechanical characteristics and corrosion behavior of (Ti,Al)N coatings on dental alloys

102

Mechanical Characteristics and Failure Mechanism of Nano-Single Crystal Aluminum Based on Molecular Dynamics Simulations: Strain Rate and Temperature Effects

103

Mechanical characteristics and microstructure of drawn wire of Ti–29Nb–13Ta–4.6Zr for biomedical applications

104

Mechanical characteristics and position control of vehicle/manipulator for ITER blanket remote maintenance

105

Mechanical characteristics and seismic response of divertor support structure with locking system

106

Mechanical characteristics evaluation of hollow shape part with metal matrix composites fabricated by thixoforging process

107

Mechanical characteristics of a novel posterior-step prosthesis for biconcave glenoid defects

108

Mechanical characteristics of a Zn–22% Al alloy processed to very high strains by ECAP

109

Mechanical characteristics of an Ormocomp® biocompatible hybrid photopolymer

110

Mechanical characteristics of articular cartilage bonds

111

Mechanical characteristics of artificial cell walls Original Research Article

112

Mechanical Characteristics of Axially Restrained Concrete Specimens at Early Ages

113

Mechanical characteristics of Fe-based coating obtained by nanoindentation

114

Mechanical characteristics of flux-grown calcium titanate and nickel titanate crystals

115

Mechanical characteristics of individual multi-layer graphene-oxide sheets under direct tensile loading

116

Mechanical characteristics of melt grown doped KMgF3 crystals

117

Mechanical characteristics of Mg–Cu–Zr thin film metallic glasses

118

Mechanical characteristics of mixed soda-lime silicate glasses

119

Mechanical characteristics of mixed soda-lime silicate glasses

120

Mechanical characteristics of porous hydroxyapatite/oxide composites produced by post-sintering hot isostatic pressing

121

Mechanical characteristics of SiC coating layer in TRISO fuel particles

122

Mechanical characteristics of soft-brittle HgCdTe single crystals investigated using nanoindentation and nanoscratching

123

Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers

124

Mechanical characteristics of solution grown potassium zinc chloride crystals doped with lithium ions

125

Mechanical characteristics of solution grown potassium zinc chloride crystals doped with lithium ions

126

Mechanical Characteristics of SPG-178 Hydrogels: Optimizing Viscoelastic Properties through Microrheology and Response Surface Methodology

127

Mechanical characteristics of swollen elastomers under cyclic loading

128

Mechanical characteristics of the ATLAS B0 model coil

129

Mechanical characteristics under monotonic and cyclic simple shear of spark plasma sintered ultrafine-grained nickel

130

Mechanical characteristics, failure regularities, and dimple structures on failure surfaces of Ti–6Al–4V ‘ELI’ ultrafine-grained alloy at temperatures from 300 to 4.2 K

131

MECHANICAL CHARACTERIZATION AND ANALYSIS OF RANDOMLY DISTRIBUTED SHORT BANANA FIBER REINFORCED EPOXY COMPOSITES

132

Mechanical characterization and comparison of different NiTi/silicone rubber interfaces

133

Mechanical characterization and constitutive modeling of Mg alloy sheets

134

Mechanical characterization and constitutive modelling of the damage process in rectus sheath

135

Mechanical characterization and constitutive modelling of the damage process in rectus sheath

136

Mechanical characterization and finite element modelling of cyclic stress–strain behaviour of ultra high molecular weight polyethylene

137

Mechanical characterization and finite element modelling of lateral spread in rolling of low carbon steels

138

Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube–epoxy composite

139

Mechanical characterization and modeling of brazed EUROFER-tungsten-joints

140

Mechanical characterization and morphology of carboxyl randomized poly(2-ethyl hexyl acrylate) liquid rubber toughened epoxy resins

141

Mechanical characterization and non-linear elastic modeling of poly(glycerol sebacate) for soft tissue engineering

142

Mechanical characterization and numerical simulation of polyether–ether–ketone (PEEK) cranial implants

143

Mechanical characterization and optical properties analysis of organically modified silicates

144

Mechanical characterization and thermal behavior of HVOF-sprayed bond coat in thermal barrier coatings (TBCs)

145

Mechanical characterization and tribological evaluation of ion-beam-assisted sputter coatings of carbon with nitrogen incorporation

146

Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites

147

Mechanical characterization at intermediate strain rates for rate effects on an epoxy syntactic foam

148

Mechanical characterization at intermediate strain rates for rate effects on an epoxy syntactic foam

149

Mechanical characterization at nanometric scale for heterogeneous graphite–salt phase change materials with a statistical approach

150

Mechanical characterization for β-Sn single crystals using nanoindentation tests

151

Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading

152

Mechanical characterization of a customized decellularized scaffold for vascular tissue engineering

153

Mechanical characterization of a customized decellularized scaffold for vascular tissue engineering

154

Mechanical Characterization of a Graphite/Epoxy IsoTruss

155

Mechanical characterization of a high elongation and high toughness epoxy adhesive

156

Mechanical characterization of a novel nanocrystalline coating: First-principles calculations and nanoindentation

157

Mechanical characterization of a polysiloxane-derived SiOC glass

158

Mechanical characterization of a styrene–butadiene modified mortar

159

Mechanical characterization of a styrene–butadiene modified mortar

160

Mechanical characterization of a Tire Derived Material: Experiments, hyperelastic modeling and numerical validation

161

Mechanical characterization of active poly(vinyl alcohol)–poly(acrylic acid) gel

162

Mechanical characterization of adhesive joints with dissimilar substrates for marine applications

163

Mechanical characterization of agarose micro-particles with a narrow size distribution

164

Mechanical characterization of aligned multi-walled carbon nanotube films using microfabricated resonators Original Research Article

165

Mechanical characterization of aluminum doped zinc oxide (Al:ZnO) nanorods prepared by sol–gel method

166

Mechanical characterization of anisotropic planar biological soft tissues using finite indentation: Experimental feasibility

167

Mechanical characterization of asphalt tear-off roofing shingles in Hot Mix Asphalt

168

Mechanical characterization of austenitic stainless steel ion irradiated under external stress

169

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

170

Mechanical characterization of bone cement using fiber Bragg grating sensors

171

Mechanical characterization of brain tissue in compression at dynamic strain rates

172

Mechanical characterization of brain tissue in simple shear at dynamic strain rates

173

Mechanical characterization of brushite and hydroxyapatite cements

174

Mechanical characterization of cellular ceramics

175

Mechanical characterization of cellulose nanofiber and bio-based epoxy composite

176

Mechanical characterization of CO2 laser beam butt welds of AA5083

177

Mechanical characterization of collagen fibers and scaffolds for tissue engineering

178

Mechanical characterization of collagen–glycosaminoglycan scaffolds

179

Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete

180

Mechanical characterization of contact lenses by microindentation: Constant velocity and relaxation testing

181

Mechanical characterization of copper coated carbon nanotubes reinforced aluminum matrix composites

182

Mechanical characterization of DC magnetron sputtered amorphous Ti–Al–Cr coatings

183

Mechanical characterization of epitaxially grown zinc oxide nanorods

184

Mechanical characterization of epoxy moulding compound in pressurized steam

185

Mechanical characterization of EUROFER97 irradiated (0.32 dpa, 300 °C)

186

Mechanical characterization of free-standing polypyrrole film

187

Mechanical characterization of friction stir spot microwelds

188

Mechanical characterization of glass fibre–epoxy composite material for ITER pre-compression rings

189

Mechanical characterization of glass/polyimide microjoints fabricated using cw fiber and diode lasers

190

Mechanical Characterization of Glass-Basalt Hybrid Composites with Different Fiber Weight Fraction

191

Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites

192

Mechanical characterization of grain boundaries using nanoindentation

193

Mechanical characterization of graphite/epoxy nanocomposites by multi-scale analysis

194

Mechanical Characterization of Hemp Cotton Hybrid Composites: Effect of Surface Treatment

195

Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation

196

Mechanical characterization of highly porous β-Si3N4 ceramics fabricated via partial sintering & starch addition

197

Mechanical characterization of hotplate synthesized vanadium oxide nanobelts Original Research Article

198

Mechanical characterization of human aortas from pressurization testing and a paradigm shift for circumferential residual stress

199

Mechanical characterization of hyperelastic materials with fringe projection and optimization techniques

200

Mechanical characterization of hyperelastic polydimethylsiloxane by simple shear test

201

Mechanical characterization of injection-molded macro porous bioceramic bone scaffolds

202

Mechanical characterization of injection-molded macro porous bioceramic bone scaffolds

203

Mechanical characterization of interfaces in epoxy-clay nanocomposites by molecular simulations

204

Mechanical characterization of kernel and shell of hazelnuts: Proposal of an experimental procedure Original Research Article

205

Mechanical characterization of Li2TiO3 and Li4SiO4 pebble beds: Experimental determination of the material properties and of the pebble bed effective values

206

Mechanical characterization of lightweight polymer mortar modified with cork granulates

207

Mechanical characterization of mechanically alloyed ultrafine-grained Ti5Si3+40 vol% γ-TiAl composites

208

Mechanical characterization of melt spun fibers from recycled and virgin PET blends

209

Mechanical characterization of micro/nanoscale structures for MEMS/NEMS applications using nanoindentation techniques

210

Mechanical characterization of micro/nanoscale structures for MEMS/NEMS applications using nanoindentation techniques

211

Mechanical characterization of micro/nanoscale structures for MEMS/NEMS applications using nanoindentation techniques

212

Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression

213

Mechanical characterization of multiwalled carbon nanotubes-polycarbonate composites

214

Mechanical characterization of nanofibers – A review

215

Mechanical characterization of nano-reinforced silica based sol–gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques

216

Mechanical characterization of nanostructured TiB2 coatings using microscratch techniques

217

Mechanical characterization of Ni1−xZnxFe2O4 prepared by non-conventional methods

218

Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer

219

Mechanical characterization of PEDOT:PSS thin films

220

Mechanical characterization of plasma sprayed ceramic coatings on metal substrates by contact testing

221

Mechanical characterization of plasma sprayed ceramic coatings on metal substrates by contact testing

222

Mechanical characterization of polyamide cellular structures fabricated using selective laser sintering technologies

223

Mechanical characterization of polymer mortars exposed to degradation solutions

224

Mechanical characterization of porous Ba0.5Sr0.5Co0.8Fe0.2O3−d

225

Mechanical characterization of proanthocyanidin–dentin matrix interaction

226

Mechanical characterization of reactively magnetron-sputtered TiN films

227

MECHANICAL CHARACTERIZATION OF RECYCLED TIRES IN CONCRETE

228

Mechanical characterization of resin cements used for luting fiber posts by nanoindentation

229

Mechanical characterization of rubble stone masonry walls using non and minor destructive tests

230

Mechanical characterization of single crystal silicon and UV-LIGA nickel thin films using tensile tester operated in AFM

231

Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis

232

Mechanical characterization of spot friction stir welded joints in aluminum alloys by combined experimental/numerical approaches: Part I: Micromechanical studies

233

Mechanical characterization of spot friction stir welded joints in aluminum alloys by combined experimental/numerical approaches: Part II: Macromechanical studies

234

Mechanical characterization of steel/CFRP double strap joints at elevated temperatures

235

Mechanical characterization of the bovine iris

236

Mechanical characterization of the interfaces in laminated composites

237

Mechanical characterization of the role of defects in sintered FeCrAlY foams

238

Mechanical characterization of the softening behavior of human vaginal tissue

239

Mechanical characterization of Ti-5Al-2.5Sn ELI alloy at cryogenic and room temperatures

240

Mechanical characterization of Ti-added MgB2/Cu superconducting wires using Vickers hardness test

241

Mechanical characterization of TiO2 nanofibers produced by different electrospinning techniques

242

Mechanical characterization of ultra-thin fluorocarbon films deposited by R.F. magnetron sputtering Original Research Article

243

Mechanical characterization of WC–10 wt% AISI 304 cemented carbides

244

Mechanical characterization of wood: An integrative approach ranging from nanoscale to structure

245

Mechanical characterizations of cast Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate)/Polyvinyl Alcohol thin films

246

Mechanical characterizations of diamond carbon films made by PACVD

247

Mechanical circulatory support

248

Mechanical circulatory support : Edited by: T. Lewis and T.R. Graham, Edward Arnold, London, UK, 385 pp. £95.00, ISBN: 0-340-57602-2

249

Mechanical Circulatory Support as a Bridge to Lung Transplantation: A Single Canadian Institution Review

250

Mechanical circulatory support for infants and children with cardiac disease

251

Mechanical Circulatory Support in Management of Cardiogenic Shock and Myxedema Coma

252

Mechanical circulatory support with the thoratec assist device in patients with postcardiotomy cardiogenic shock

253

Mechanical circulatory support: The Bad Oeynhausen experience

254

Mechanical Circulatory Support: We Are Halfway There

255

Mechanical colon cleansing device in patients with chronic const pation: An experimental study

256

Mechanical compaction of deeply buried sandstones of the North Sea

257

Mechanical comparison of three sternotomy closure techniques using a polyurethane foam sternal model

258

Mechanical comparison of three sternotomy closure techniques using a polyurethane foam sternal model: Reply

259

Mechanical compliance of photolithographically defined vertically aligned carbon nanotube turf

260

Mechanical compliance of the endocardium

261

Mechanical complications after implantation of multiple-lead nonthoracotomy defibrillator systems: Implications for management and future system design

262

Mechanical Complications After Percutaneous Coronary Intervention in ST-Elevation Myocardial Infarction (from APEX-AMI)

263

Mechanical complications following acute myocardial infarction

264

Mechanical complications of intra-aortic balloon counterpulsation

265

Mechanical compression alters gene expression and extracellular matrix synthesis by chondrocytes cultured in collagen I gels

266

Mechanical compression and hydrostatic pressure induce reversible changes in actin cytoskeletal organisation in chondrocytes in agarose

267

Mechanical Condition Recognition of Medium-Voltage Vacuum Circuit Breaker Based on Mechanism Dynamic Features Simulation and ANN

268

Mechanical conditions in bulk metal forming tribometers—Part one

269

Mechanical conditions in bulk metal forming tribometers—Part two

270

Mechanical conditions in the initial phase of bone healing

271

Mechanical conditions in the internal stabilization of proximal tibial defects

272

Mechanical consequence of trabecular bone loss and its treatment: a three-dimensional model simulation

273

Mechanical consequences of cellular force generation

274

Mechanical consequences of different scenarios for simulated bone atrophy and recovery in the distal radius

275

Mechanical consequences of LOCA in PWR: Full scale coupled 1D/3D simulations with fluid–structure interaction

276

Mechanical considerations in the design of surgical reconstructive procedures

277

Mechanical constraints on the chronology of fracture activation in folded Devonian sandstone of the western Moroccan Anti-Atlas

278

Mechanical Control of Root Growth: A Computer Simulation

279

Mechanical control of shrubs in a semiarid region of Argentina and its effect on soil water content and grassland productivity

280

Mechanical controls on fault geometry

281

Mechanical controls on the deformation of continents at convergent margins

282

Mechanical coolers operating below 4.5 K for space application

283

Mechanical coolers operating below 4.5 K for space application

284

Mechanical Coupling in Myosin V: A Simulation Study

285

Mechanical cross-characterization of sputtered inconel thin films for MEMS applications

286

Mechanical cross-characterization of sputtered inconel thin films for MEMS applications

287

Mechanical cutting of bamboo-shaped multiwalled carbon nanotubes by an atomic force microscope tip

288

Mechanical damage behaviour of an injected sand by periodic homogenization method

289

Mechanical damage of carbon nanotubes by ultrasound

290

Mechanical damage of ordinary or prestressed reinforced concrete beams under cyclic bending

291

Mechanical damage of roots provides enhanced colonization of the wheat endorhizosphere by the dinitrogen-fixing cyanobacterium Nostoc sp. strain 2S9B

292

MECHANICAL DAMAGE OF STRAWBERRY DURING HARVEST AND POSTHARVEST OPERATIONS

293

Mechanical Damage to Apples during Transport in Wooden Crates

294

Mechanical damage to Gram-negative bacteria by surface plating with the Drigalski-spatula technique

295

Mechanical damage to the intervertebral disc annulus fibrosus subjected to tensile loading

296

Mechanical damping in porous Ti3SiC2 Original Research Article

297

Mechanical damping using adhesive micro or nano powders

298

Mechanical debulking versus balloon angioplasty for the treatment of diffuse in-stent restenosis

299

Mechanical debulking versus balloon angioplasty for the treatment of true bifurcation lesions

300

Mechanical decoupling and basal duplex formation observed in sandbox experiments with application to the Western Mediterranean Ridge accretionary complex

301

Mechanical decoupling and thermal structure at the East Pacific Rise axis 9°N: Constraints from axial magma chamber geometry and seafloor structures

302

Mechanical decoupling of high-pressure crustal units during continental subduction

303

Mechanical Deep Placement of Nitrogen in Wetland Rice

304

Mechanical deformation effect on CsI(Tl) scintillators efficiency

305

Mechanical deformation effect on CsI(Tl) scintillators efficiency

306

Mechanical deformation in carbon nanotubes – bent tubes vs tubes pushed by atomically sharp tips

307

Mechanical deformation inhibits IL-10 and stimulates IL-12 production by mouse calvarial osteoblasts in vitro

308

Mechanical deformation of carbon-nanotube-based aerogels

309

Mechanical Deformation of Compressible Chromatographic Columns

310

Mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts Original Research Article

311

Mechanical deformation of PZT thin films for MEMS applications

312

Mechanical deformation of PZT thin films for MEMS applications

313

Mechanical degradation and mechanochemical copolymerization of hydroxyethyl cellulose

314

Mechanical degradation of cold-worked 304 stainless steel in salt spray environments

315

Mechanical degradation of foam-cored sandwich materials exposed to high moisture

316

Mechanical degradation of microelectronics solder joints under current stressing

317

Mechanical degradation of polysaccharide guar gum under turbulent flow

318

Mechanical demand and multijoint control during landing depend on orientation of the body segments relative to the reaction force

319

Mechanical descaling of wire rod using reverse bending and brushing

320

Mechanical Design and Analysis of All‐terrain Mobile Robot

321

Mechanical design and construction qualification program on ITER correction coils structures

322

Mechanical design and first experimental results of an upgraded technical PERMCAT reactor for tritium recovery in the fuel cycle of a fusion machine

323

Mechanical design and manufacture by powder technology of a new mandrel tool for the fabrication of assault rifle barrels

324

Mechanical design and performance of composite multifunctional materials Original Research Article

325

Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects

326

Mechanical Design and Simulation of a Saddle-Assistive Device for Sit-to-Stand Transfer in Healthy Subjects

327

Mechanical design aspects of a soft X-ray plane grating monochromator

328

Mechanical design aspects of a soft X-ray plane grating monochromator

329

Mechanical Design Considerations for Conventionally Laminated, High-Speed, Interior PM Synchronous Machine Rotors

330

Mechanical design considerations of the centerpost for a spherical torus volumetric neutron source

331

Mechanical design features and challenges for the ITER ICRH antenna

332

Mechanical design for modification of a neutral beam for off-axis injection

333

Mechanical design issues and resolutions of a dual cooled fuel for the OPR-1000

334

Mechanical design of a 5-DOF robotic interface for application in haptic simulation systems of large-organ laparoscopic surgery

335

Mechanical design of a PERMCAT reactor module

336

Mechanical design of a single-axis monolithic accelerometer for advanced seismic attenuation systems

337

Mechanical design of a single-axis monolithic accelerometer for advanced seismic attenuation systems

338

Mechanical design of an intracranial stent for treating cerebral aneurysms

339

Mechanical design of multifunctional quadruped

340

MECHANICAL DESIGN OF PLASTICS INJECTION MOULDS BY MEANS OF FEA

341

Mechanical Design of the First Proximal Ig Domain of Human Cardiac Titin Revealed by Single Molecule Force Spectroscopy

342

Mechanical design of the ITER ion cyclotron heating launcher based on in-vessel tuning system

343

Mechanical design of the second ICRF antenna for EAST

344

Mechanical design of the small-scale experimental ADS: MYRRHA

345

Mechanical Design of the Third FnIII Domain of Tenascin-C

346

Mechanical design of the two dimensional beam emission spectroscopy diagnostics on mast

347

Mechanical Design Requirements for Low Tunnel Biodegradable and Conventional Films

348

Mechanical detection of nuclear spin relaxation in a micron-size crystal

349

Mechanical deterioration of ACSR conductors due to forest fires

350

Mechanical deterioration of polyethylene greenhouses covering under arid conditions

351

Mechanical determinants of epithelium thickness in early-stage embryos

352

Mechanical determinants of plaque modeling, remodeling and disruption

353

Mechanical discontinuities monitoring at Merapi volcano using kinematic GPS

354

Mechanical dispersion of Y2O3 nanoparticles in steel EUROFER 97: process and optimisation

355

Mechanical dispersion procedures improve the rehydration of active dry yeast

356

Mechanical distinction and manipulation of atoms based on noncontact atomic force microscopy

357

Mechanical Distribution ofChrysoperla rufilabrisandTrichogramma pretiosum:Survival and Uniformity of Discharge after Spray Dispersal in an Aqueous Suspension

358

Mechanical durability and combustion characteristics of pellets from biomass blends

359

Mechanical durability of a polymer concrete: a Vickers indentation study of the strength degradation process

360

Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study

361

Mechanical Durability of Expanded Shale Lightweight Aggregate

362

Mechanical Durability of Expanded Shale Lightweight Aggregate

363

Mechanical durability of polymeric coatings studied by positron annihilation spectroscopy: correlation between cyclic loading and free volumes

364

Mechanical dynamical spectroscopy in CuLi alloys produced by electrodeposition

365

Mechanical dynamical spectroscopy in CuLi alloys produced by electrodeposition

366

Mechanical dysfunction in the border zone of an ovine model of left ventricular aneurysm

367

Mechanical Dysfunction of the Left Atrium and the Left Atrial Appendage Following Cardioversion of Atrial Fibrillation and Its Relation to Total Electrical Energy Used for Cardioversion

368

Mechanical Dyssynchrony Assessed by Tissue Doppler Imaging Is a Powerful Predictor of Mortality in Congestive Heart Failure With Normal QRS Duration Original Research Article

369

Mechanical Dyssynchrony in Congestive Heart Failure: Diagnostic and Therapeutic Implications Review Article

370

Mechanical effect of additional supports in a rocking on heels movement

371

Mechanical effect of colloidal silica in copper chemical mechanical planarization

372

Mechanical effect of double-level degeneration of lumbar spine discs by finite element method

373

Mechanical effect of process condition and abrasive concentration on material removal rate profile in copper chemical mechanical planarization

374

Mechanical Effects in PEM Fuel Cell: Application to Modeling of Assembly Procedure

375

Mechanical Effects in PEM Fuel Cell: Application to Modeling of Assembly Procedure

376

Mechanical effects of chemical etchings on monocrystalline silicon for photovoltaic use

377

Mechanical effects of continuous passive motion on the lumbar spine in seating

378

Mechanical effects of ranolazine on normal and diabetic-isolated rat heart

379

Mechanical effects of the self-organization of dislocations and related critical characteristics

380

Mechanical effects on collective phenomena of biological systems: cell locomotion

381

Mechanical efficacy of vertebroplasty: Influence of cement type, BMD, fracture severity, and disc degeneration

382

Mechanical efficiency and propulsion technique after 7 weeks of low-intensity wheelchair training

383

Mechanical efficiency and user power requirement with a pushrim activated power assisted wheelchair

384

Mechanical efficiency during hand–rim wheelchair propulsion: effects of base-line subtraction and power output

385

Mechanical efficiency in hypertrophic cardiomyopathy assessed by positron emission tomography with carbon 11 acetate,

386

Mechanical efficiency of cycling with a new developed pedal–crank

387

Mechanical endoscopic methods of haemostasis for bleeding peptic ulcers: a review

388

Mechanical energetic contributions from individual muscles and elastic prosthetic feet during symmetric unilateral transtibial amputee walking: A theoretical study

389

Mechanical energetic processes during the giant swing before the Tkatchev exercise

390

Mechanical energetic processes during the giant swing exercise before dismounts and flight elements on the high bar and the uneven parallel bars

391

Mechanical energies associated with compaction of form I and form II paracetamol powder

392

Mechanical energy analysis identifies compensatory strategies in disabled elders gait

393

Mechanical energy analysis identifies compensatory strategies in disabled elders’ gait

394

Mechanical energy and effective foot mass during impact loading of walking and running

395

Mechanical energy and power flow of the upper extremity in manual wheelchair propulsion

396

Mechanical energy contribution of the metatarsophalangeal joint to running and sprinting

397

Mechanical energy efficiency of a wheelchair racing stroke

398

Mechanical energy losses due to the movement of dislocations in molybdenum at high temperatures (0.3Tm)

399

Mechanical energy transductions in standing wave ultrasonic motors: Analytical modelling and experimental investigations

400

Mechanical energy transfer and flow parameter effects for a cylinder in transverse oscillation

401

Mechanical energy transfer during gait in relation to strength impairment and pathology in elderly women

402

Mechanical Engineering Design Theory Framework for Solar Desalination Processes: A Review and Meta - Analysis

403

Mechanical enhancement of C/C composites via the formation of a machinable carbon nanofiber interphase Original Research Article

404

Mechanical enhancement of the dissolution of ilmenite

405

Mechanical environment associated with rotator cuff tears

406

Mechanical environment of the supraspinatus tendon: a two-dimensional finite element model analysis

407

Mechanical equipment injuries in small manufacturing businesses

408

Mechanical Equipment Reliability Analysis: Case Study

409

Mechanical evaluation and thermal modelling of friction welding of mild steel and aluminium

410

Mechanical evaluation by patient-specific finite element analyses demonstrates therapeutic effects for osteoporotic vertebrae

411

Mechanical evaluation of a respiratory device

412

Mechanical evaluation of bacterial nanocellulose as an implant material for ear cartilage replacement

413

Mechanical evaluation of cervical glass-ionomer restorations: 3D finite element study

414

Mechanical evaluation of cordierite precursor green bodies obtained by starch thermogelling

415

Mechanical evaluation of implanted calcium phosphate cement incorporated with PLGA microparticles

416

Mechanical evaluation of novel spinal interbody fusion cages made of bioactive, resorbable composites

417

Mechanical evaluation of poly(vinyl alcohol)-based fibrous composites as biomaterials for meniscal tissue replacement

418

Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)

419

Mechanical evaluation of unbiased W–O–N coatings deposited by d.c. reactive magnetron sputtering

420

Mechanical events within the arterial wall under the forces of pulsatile flow: A review

421

Mechanical examination of crack length dependency and material dependency on threshold stress intensity factor range with Dugdale model

422

Mechanical experiments about pendulum support of vacuum vessel W7-X

423

Mechanical experiments on the superplastic material ALNOVI-1, including leak information

424

Mechanical fabrication of metal nano-contacts showing conductance quantization under electrochemical potential control

425

Mechanical Factors in Arterial Aging: A Clinical Perspective Review Article

426

Mechanical factors in bone growth and development

427

Mechanical factors in restenosis; hemodynamic studies in humans

428

Mechanical factors relate to pain in knee osteoarthritis

429

Mechanical failure analysis of a rubber drying machine speed reducer output shaft

430

Mechanical failure analysis of thin film transistor devices on steel and polyimide substrates for flexible display applications

431

Mechanical failure classification for spherical roller bearing ofhydraulic injection molding machine using DWT–SVM

432

Mechanical failure of anodized aluminum under three and four-point bending tests

433

Mechanical failure of anodized film of aluminium in bending

434

Mechanical failure of thin brittle coatings

435

Mechanical failures as a contributing cause to motor vehicle accidents — South Africa

436

Mechanical fatigue degradation of ceramics versus resin composites for dental restorations

437

Mechanical fatigue in monolithic non-transforming ceramics

438

Mechanical fatigue of polysilicon: Effects of mean stress and stress amplitude

439

Mechanical fatigue of polysilicon: Effects of mean stress and stress amplitude Original Research Article

440

Mechanical Fault Detection in a Medium-Sized Induction Motor Using Stator Current Monitoring

441

Mechanical fault detection in permanent magnet synchronous motors using equal width discretization-based probability distribution and a neural network model

442

Mechanical fault diagnostics for induction motor with variable speed drives using Adaptive Neuro-fuzzy Inference System

443

Mechanical Fault Types Detection in Transformer Windings Using ‎Interpretation of Frequency Responses via Multilayer Perceptron

444

Mechanical features of biocomposites containing porous corundum grains

445

Mechanical features optimization for oxide films growing on alloy

446

Mechanical filter for alkali atoms

447

Mechanical filter for alkali atoms

448

Mechanical filtering characteristics of passive periodic engine mount

449

Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells

450

Mechanical flow anisotropy in severely deformed pure titanium

451

Mechanical force analysis of peptide interactions using atomic force microscopy

452

MECHANICAL FORCE DETERMINES CELL POLARITY AND DIRECTED MIGRATION IN ENDOTHELIUM

453

Mechanical force induced reversible fluorescence switching of two 3-aryl-2-cyano acrylamide derivatives

454

Mechanical force-induced midpalatal suture remodeling in mice

455

Mechanical forces in cerebral cortical folding: A review of measurements and models

456

MECHANICAL FRINGE SHIFTING IN MOIRE INTERFEROMETRY

457

Mechanical function, glycolysis, and ultrastructure of perfused working mouse hearts following thoracic aortic constriction

458

Mechanical gradient interphase by interdiffusion and antiplasticisation effect—study of an epoxy/thermoplastic system

459

Mechanical grape harvesting: Investigation of the transmission of vibrations

460

Mechanical grinding effect on thermodynamics and inclusion efficiency of loratadine–cyclodextrin inclusion complex formation

461

Mechanical grooming and beach award status are associated with low strandline biodiversity in Scotland

462

Mechanical Harvesting of Apricots

463

Mechanical harvesting of oranges and mandarins in Spain

464

Mechanical harvesting of pistachio nuts Original Research Article

465

Mechanical heart valve prostheses: Identification and evaluation

466

Mechanical heart valve prostheses:: identification and evaluation (erratum)

467

Mechanical heart valves: 50 years of evolution

468

Mechanical hinge system for delamination tests in beam-type composite specimens

469

Mechanical homogenisation of masonry wall without mortar

470

Mechanical hysteresis in ceramic matrix composites

471

Mechanical impedance of the human body in vertical direction

472

Mechanical impedances distributed at the fingers and palm of the human hand in three orthogonal directions

473

Mechanical implications of humero-ulnar incongruity — finite element analysis and experiment

474

Mechanical Implications of the Domain Structure of Fiber-Forming Collagens: Comparison of the Molecular and Fibrillar Flexibilities of the α1-Chains Found in Types I–III Collagen

475

Mechanical improvement of hydroxyapatite by TiOx nanoparticles deposition

476

Mechanical improvement of P(VDF-TrFE) /nickel nanowires conductive nanocomposites: Influence of particles aspect ratio

477

Mechanical index

478

Mechanical induction in limb morphogenesis: the role of growth-generated strains and pressures

479

Mechanical induction of critically delayed bone healing in sheep: Radiological and biomechanical results

480

Mechanical influence of PAC particles on membrane processes

481

Mechanical influences on trabecular bone architecture and extracellular matrix organization during formation

482

Mechanical inhomogeneity of myocardium studied in parallel and serial cardiac muscle duplexes: experiments and models

483

Mechanical injury of explants from the articulating surface of the inner meniscus

484

Mechanical instabilities and structural phase transitions: The cubic to tetragonal transformation Original Research Article

485

Mechanical instability in non-uniform atomic structure: Application to amorphous metal

486

Mechanical instability induced by complex liquid desiccation

487

Mechanical integrity of compression-moulded ultra-high molecular weight polyethylene: effects of varying process conditions

488

Mechanical integrity of dye-sensitized photovoltaic fibers

489

Mechanical integrity of flexible Ag nanowire network electrodes coated on colorless PI substrates for flexible organic solar cells

490

Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown by continuous roll-to-roll sputtering

491

Mechanical integrity of magnesium alloys in a physiological environment: Slow strain rate testing based study

492

Mechanical Integrity Reduction in the Polymeric-pulsatilepressurized Vessel under Strain-induced Degradation Model

493

Mechanical interaction between single-walled carbon nanotubes during the formation of a bundle

494

Mechanical interaction between spherical inhomogeneities: an assessment of a method based on the equivalent inclusion

495

Mechanical interaction between swelling compacted clay and fractured rock, and the leaching of clay colloids

496

Mechanical interaction issues in piezoelectric composite structures

497

Mechanical interactions in STM imaging of large insulating adsorbates

498

Mechanical interactions in STM imaging of large insulating adsorbates

499

Mechanical interactions of an implant/tooth-supported system under different periodontal supports and number of splinted teeth with rigid and non-rigid connections

500

Mechanical investigation of a multi-layer reflectarray for Ku-band space antennas

501

Mechanical investigation of perforated and porous membranes for micro- and nanofilter applications

502

Mechanical investigation of perforated and porous membranes for micro- and nanofilter applications

503

Mechanical investigation of two fiber-reinforced repair mortars and the repaired system

504

Mechanical isolation and characterization of antigensfrom adult Anguillicola crassus

505

Mechanical Left Ventricular Dyssynchrony in Heart Failure Patients With Narrow QRS Duration as Assessed by Three-Dimensional Speckle Area Tracking Strain

506

Mechanical load distribution along the main cutting edges in drilling

507

Mechanical Load Enhances the Stimulatory Effect of Serum Growth Factors on Cardiac Fibroblast Procollagen Synthesis

508

Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis

509

Mechanical load on a particle aggregate in mono-axial elongational flow

510

Mechanical load on the low back and shoulders during pushing and pulling of two-wheeled waste containers compared with lifting and carrying of bags and bins

511

Mechanical load-assisted dissolution of metallic implant surfaces: Influence of contact loads and surface stress state

512

Mechanical Loading and TGF-β Regulate Proteoglycan Synthesis in Tendon

513

Mechanical loading enhances the anabolic effects of intermittent parathyroid hormone (1–34) on trabecular and cortical bone in mice

514

Mechanical loading leads to osteoarthritis-like changes in the hypofunctional temporomandibular joint in rats

515

Mechanical loading modulates glutamate receptor subunit expression in bone

516

Mechanical loading of bovine pericardium accelerates enzymatic degradation

517

Mechanical longevity estimation model for post-and-core restorations

518

Mechanical loss associated with silicate bonding of fused silica

519

Mechanical loss in tantala/silica dielectric mirror coatings

520

Mechanical loss of cubic zirconia

521

Mechanical loss spectroscopy on inorganic glasses and glass ceramics

522

Mechanical loss spectrum of Ni3(Al,Ta) single crystals

523

Mechanical loss spectrum of Ni3(Al,Ta) single crystals

524

Mechanical loss, creep, diffusion and ionic conductivity of ZrO2-8 mol%Y2O3 polycrystals

525

Mechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber

526

Mechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber

527

Mechanical material characterization of Co nanowires and their nanocomposite

528

Mechanical mean reversion of leverage ratios

529

Mechanical Measurement of Single-molecule Binding Rates: Kinetics of DNA Helix-destabilization by T4 Gene 32 Protein

530

Mechanical measurements in RFX-mod experiment

531

Mechanical measurements of a single protein molecule and human chromosomes by atomic force microscopy

532

Mechanical measurements of ultra-thin amorphous carbon membranes using scanning atomic force microscopy Original Research Article

533

Mechanical mechanisms of thrombosis in intact bent microvessels of rat mesentery

534

Mechanical metallization of alumina substrate through shot impact treatment

535

Mechanical milled doped Zn-based semiconductors powders for photovoltaic devices

536

Mechanical milling and SPS used to obtain GeS2-βGeS2 infrared glass-ceramic

537

Mechanical milling and subsequent annealing effects on the microstructural and hydrogenation properties of multisubstituted LaNi5 alloy

538

Mechanical milling and subsequent annealing effects on the microstructural and hydrogenation properties of multisubstituted LaNi5 alloy Original Research Article

539

Mechanical milling for catalyst loading of polymer filters

540

Mechanical milling induced phase transformation in orthorhombic nanocrystalline MnP compound

541

Mechanical milling of catalyst support for enhancing the performance in fuel cells

542

Mechanical milling of Fe3O4/SiO2: Formation of an amorphous Fe(II)-Si-O-containing phase

543

Mechanical milling of Fe–Li and Cu–Li systems and their nitrogen absorption properties

544

Mechanical milling of magnesium powder

545

Mechanical milling of magnesium powder

546

Mechanical milling of Mg, Ni and Y powder mixture and investigating the effects of produced nanostructured MgNi4Y on hydrogen desorption properties of MgH2

547

Mechanical milling of the (α-Fe2O3)x(α-Al2O3)1−x system: an X-ray diffraction and Mössbauer spectral study

548

Mechanical milling of Ti–Ni–Si filler metal for brazing TiAl intermetallics

549

Mechanical milling with capacitively coupled plasma for surface modification of particulate materials

550

Mechanical mixtures of PdCeO and HPA/SiO2: structure and reactivity for n-hexane isomerisation

551

Mechanical mixtures of α-Sb2O4 and MoO3 as highly selective catalysts for the oxidation of methanol to formaldehyde Original Research Article

552

Mechanical mode floating medium filters for recirculating systems in aquaculture for higher solids retention and lower freshwater usage

553

Mechanical model for critical strain in mineralizing biological tissues: application to bone formation in biomaterials

554

Mechanical model for staggered bio-structure

555

Mechanical model for theoretical determination of maximum running speed in mammals

556

Mechanical Model for Unbonded Seven-Wire Tendon with Symmetric Wire Breaks

557

Mechanical model of cytoskeleton structuration during cell adhesion and spreading

558

Mechanical model of multi-crack rockmass and its engineering application

559

Mechanical model of the breast for the prediction of deformation during imaging

560

Mechanical model of the inspiratory pump

561

Mechanical model of the pattern formation of lotus receptacles

562

Mechanical model to evaluate the effect of the dispersion in nanocomposites Original Research Article

563

Mechanical modeling and microstructural observation of pure aluminum crept under constant stress

564

Mechanical modeling and microstructural observation of pure aluminum crept under constant stress

565

Mechanical Modeling of a High-Performance Solar Desalination System Based on a Three-Step Approach

566

Mechanical modeling of a wrinkled fingertip immersed in water

567

Mechanical modeling of aquifer sands under long-term groundwater withdrawal

568

Mechanical modeling of circumferential and radial dike intrusion on Galapagos volcanoes

569

Mechanical modeling of fretting cycles in electrical contacts

570

Mechanical modeling of growth considering domain variation. Part I: constitutive framework

571

Mechanical modeling of growth considering domain variation—Part II: Volumetric and surface growth involving Eshelby tensors

572

Mechanical modeling of helical structures accounting for translational invariance. Part 1: Static behavior

573

Mechanical modeling of helical structures accounting for translational invariance. Part 2 : Guided wave propagation under axial loads

574

Mechanical modeling of self-expandable stent fabricated using braiding technology

575

Mechanical modeling of the rolling phenomenon at the cell scale

576

Mechanical modeling of thrust faults in the Thaumasia region, Mars, and implications for the Noachian heat flux

577

Mechanical modeling of viral capsids

578

Mechanical modeling of wheat hardness and fragmentation

579

Mechanical modelization of anisotropic porous materials with a homogenization method. Application to aerated concretes

580

Mechanical modelling of carbon nanomaterials from nanotubes to buckypaper Original Research Article

581

Mechanical modelling of cell/ECM and cell/cell interactions during the contraction of a fibroblast-populated collagen microsphere: theory and model simulation

582

Mechanical modelling of folding versus faulting in brittle–ductile wedges

583

Mechanical modelling of friction variation in slab edging with a finite element method approach

584

Mechanical modelling of indentation-induced densification in amorphous silica Original Research Article

585

Mechanical modelling of micro-scale abrasion in superfinish belt grinding

586

Mechanical modelling of monofilament technical textiles

587

Mechanical modelling of the creep behaviour of Hollow-Sphere Structures

588

Mechanical models for insect locomotion: stability and parameter studies

589

Mechanical models for living cells—a review

590

Mechanical models of cellular solids: Parameters identification from experimental tests

591

Mechanical models of fault propagation folds and comparison to the trishear kinematic model

592

Mechanical models of fracture reactivation and slip on bedding surfaces during folding of the asymmetric anticline at Sheep Mountain, Wyoming

593

Mechanical models of the 1975 Kalapana, Hawaii earthquake and tsunami

594

Mechanical models of the cellular cytoskeletal network for the analysis of intracellular mechanical properties and force distributions: A review

595

Mechanical models of trishear-like folds

596

Mechanical modulation and bioactive surface modification of porous Ti–10Mo alloy for bone implants

597

Mechanical modulation of reaction rates in electrocatalysis

598

Mechanical mutability of polycrystalline graphene from atomistic simulations

599

Mechanical nociception thresholds in lame sows: Evidence of hyperalgesia as measured by two different methods

600

Mechanical nonequilibrium considerations in homogeneous bubble nucleation for unsteady-state boiling

601

Mechanical Occlusion of the Inferior Vena Cava: An Unusual Complication After Repair of Pectus Excavatum Using the Nuss Procedure

602

Mechanical opening of DNA by micro manipulation and force measurements

603

Mechanical or cold lateral compaction: The incidence of dentinal defects

604

Mechanical output from individual muscles during explosive leg extensions: The role of biarticular muscles

605

Mechanical Parameter Inversion in Sandstone Diversion Tunnel and Stability Analysis during Operation Period

606

Mechanical parameters of strontium doped hydroxyapatite sintered using microwave and conventional methods

607

Mechanical passive and active models of the human basilar membrane

608

Mechanical peeling of pumpkins. Part 1: Using an abrasive-cutter brush Original Research Article

609

Mechanical peeling of pumpkins. Part 2: Modeling of peeling process Original Research Article

610

Mechanical performance and fracture behaviour of glass–matrix composites reinforced with molybdenum particles

611

Mechanical performance and growth characteristics of boron nitride films with respect to their optical, compositional properties and density

612

Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin

613

Mechanical performance and nanoindenting deformation of (AlCrTaTiZr)NCy multi-component coatings co-sputtered with bias

614

Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material

615

Mechanical Performance of 3D Printed Polylactic Acid/MWCNT Brackets: Effects of CNT Concentration and Printing Orientation on Stress-Strain Behavior and Deflection Characteristics

616

Mechanical performance of acrylic bone cements containing different radiopacifying agents

617

Mechanical performance of apatite/TiO2 composite coatings formed on Ti and NiTi shape memory alloy

618

Mechanical performance of artificial pneumatic muscles to power an ankle–foot orthosis

619

Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources

620

Mechanical performance of asphalt mixtures produced with cork or rubber granulates as aggregate partial substitutes

621

Mechanical performance of bioceramic coatings obtained by high-velocity oxy-fuel spray for biomedical purposes

622

Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres – A comparative study to PP

623

Mechanical performance of BStIV grade steel bars with regard to the long-term material degradation due to corrosion damage

624

Mechanical performance of composite-strengthened concrete structures

625

Mechanical performance of corroded RC member repaired by HPFRCC patching

626

Mechanical performance of eccentrically loaded pre-stressing concrete filled circular steel tube columns by means of expansive cement

627

Mechanical performance of endodontically treated teeth

628

Mechanical performance of flow-induced self-compacting steel fibre-reinforced concrete used for structure of hydraulic works

629

Mechanical performance of full scale steel-timber epoxy joints after exposure to extreme environmental conditions

630

Mechanical performance of heat treated 319 alloys as a function of alloying and aging parameters

631

Mechanical performance of highly compressible multi-walled carbon nanotube columns with hyperboloid geometries Original Research Article

632

Mechanical performance of hybrid Ilizarov external fixator in comparison with Ilizarov circular external fixator

633

Mechanical performance of hydrogel contact lenses with a range of power under parallel plate compression and central load

634

Mechanical performance of knots using braided and monofilament absorbable sutures

635

Mechanical performance of LaCrO3 doped with strontium and cobalt for SOFC interconnect

636

Mechanical performance of laminated composites incorporated with nanofibrous membranes

637

Mechanical performance of magnet insulation materials fabricated by the “Insulate-Wind-and-React” technique

638

Mechanical performance of metallic glasses during nanoscratch tests

639

Mechanical performance of nano-CaCO3 filled polystyrene composites

640

Mechanical performance of novel bioactive glass containing dental restorative composites

641

Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites

642

Mechanical performance of polymer systems: The relation between structure and properties

643

Mechanical performance of polysulfone, polybutylene, and polyamide 6/6 in hot chlorinated water

644

Mechanical performance of polyurethane ureteral stents in vitro and ex vivo

645

Mechanical performance of self-compacting concrete reinforced with steel fibers

646

Mechanical performance of shotcrete made with a high-strength cement-based mineral accelerator

647

Mechanical performance of stretched knitted fabric glass fibre reinforced poly(ethylene terephthalate) composites produced from commingled yarn

648

Mechanical performance of stretched knitted fabric glass fibre reinforced poly(ethylene terephthalate) composites produced from commingled yarn

649

Mechanical performance of styrene-butadiene-rubber filled with carbon nanoparticles prepared by mechanical mixing

650

Mechanical performance of through-thickness tufted sandwich structures

651

Mechanical performance separation of cardiac by nonlinear processing of Ultrasound B-mode images

652

Mechanical performance upgrading of CVD diamond using the multilayer strategy

653

Mechanical performance, durability, qualitative and quantitative analysis of microstructure of fly ash and Metakaolin mortar at elevated temperatures

654

Mechanical performances and microstructural characteristics of plasma-sprayed bio-functionally gradient HA–ZrO2–Ti coatings

655

Mechanical performances of a thermal activated composite

656

Mechanical perturbation of the wrist during one-handed catching

657

Mechanical phenomena of a new-type anisotropic conductive film adhering to the outer lead bonding

658

MECHANICAL POWER ASSESSMENT OF AN ALPHA V-TYPE STIRLING ENGINE CONVERTED DIESEL ENGINE

659

Mechanical power in running: a comparison of different approaches

660

Mechanical pre-design of high performance motion servomechanisms

661

Mechanical pressing and semolina preparation from fermented cassava paste during “attiéké” (yucca flour) processing Original Research Article

662

Mechanical pretreatment of waste activated sludge for anaerobic digestion process

663

Mechanical Probes of SOD1 Predict Systematic Trends in Metal and Dimer Affinity of ALS-Associated Mutants

664

Mechanical problem-solving and imitation of meaningless postures in left brain damaged patients: Two sides of the same coin?

665

Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy

666

Mechanical processing and microstructural control in hot working of hot isostatically pressed P/M IN-100 superalloy

667

Mechanical processing and self-sustaining high-temperature synthesis of TiC powders

668

Mechanical processing and self-sustaining high-temperature synthesis of TiC powders

669

Mechanical processing of Ag/BSCCO high temperature superconductor tape

670

Mechanical production and stabilization of submicron particles in stirred media mills

671

Mechanical properities of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling

672

Mechanical properities of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling

673

MECHANICAL PROPERT IES OF MULTI-COMPONENT POLYMERIC COMPOSITE WITH PART ICLES OF AL2O3/SIC

674

Mechanical Properties Analysis of Bilayer Euler-Bernoulli Beams Based on Elasticity Theory

675

Mechanical properties analysis of plaster reinforced with fiber and microfiber obtained from shredded tires

676

Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate

677

Mechanical properties and accommodation processes on metallic interfaces

678

Mechanical properties and adaptations of some less familiar bony tissues

679

Mechanical properties and adhesion characteristics of hybrid sol–gel thin films

680

Mechanical properties and adhesion of oxide films examined by a solid particle impact method at high temperature corrosive environments

681

Mechanical properties and aesthetics of FRP orthodontic wire fabricated by hot drawing

682

Mechanical properties and ageing response of the Mg–6Zn–1Er alloy produced by a new method of RPW process

683

Mechanical properties and anisotropy of ME20 magnesium sheet produced by unidirectional and cross rolling

684

Mechanical properties and antibacterial activity of copper doped diamond-like carbon films

685

Mechanical properties and anti-corrosion behavior of the diamond-like carbon films

686

Mechanical properties and apatite-forming ability of PMMA bone cements

687

Mechanical properties and atomistic deformation mechanism of spinel-type BeP2N4

688

Mechanical properties and atomistic deformation mechanism of γ-Y2Si2O7 from first-principles investigations Original Research Article

689

Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti–18Nb–4Sn alloy for biomedical applications

690

Mechanical properties and bioactivity of porous PLGA/TiO2 nanoparticle-filled composites for tissue engineering scaffolds

691

Mechanical properties and bioactivity of β-Ca2SiO4 ceramics synthesized by spark plasma sintering

692

Mechanical properties and biochemical activity of remineralizing resin-based Ca–PO4 cements

693

Mechanical properties and biodegradation of thermoplastic starches obtained from grafted starches with acrylics

694

Mechanical properties and biomedical applications of a nanotube hydroxyapatite-reduced graphene oxide composite

695

Mechanical properties and bond strength of dual-cure resin composites to root canal dentin

696

Mechanical properties and bonding feature of the YAg, CeAg, HoCu, LaAg, LaZn, and LaMg rare-earth intermetallic compounds: An ab initio study

697

Mechanical properties and bonding of maxillofacial silicone elastomers

698

Mechanical properties and bonding structure of boron carbon nitride films synthesized by dual ion beam sputtering

699

Mechanical properties and characteristics of developmental copolymers incorporating catechin or chlorhexidine

700

Mechanical properties and chemical bonding characteristics of WC and W2C compounds

701

Mechanical properties and chemical bonding of the Os–B system: A first-principles study Original Research Article

702

Mechanical properties and compositional heterogeneities of fresh geopolymer pastes

703

Mechanical properties and conductance behavior of fiber glass investigated by different physical methods

704

Mechanical properties and consolidation of binderless nanostructured (Ti,Cr)C from mechanochemically-synthesized powder by high-frequency induction heating sintering

705

Mechanical properties and constitutive equations of concrete containing a low volume of tire rubber particles

706

Mechanical properties and constitutive relationships of 30CrMnSiA steel heated at high rate

707

Mechanical properties and corrosion behavior of (Cu0.6Hf0.25Ti0.15)90Nb10 bulk metallic glass composites

708

Mechanical properties and corrosion behaviour of nanocrystalline Ti–5Ta–1.8Nb alloy produced by cryo-rolling

709

Mechanical properties and corrosion behaviour of ultrafine-grained AA6082 produced by equal-channel angular pressing

710

Mechanical properties and corrosion of CAC mortars with carbon fibers

711

Mechanical properties and corrosion resistance of concrete modified with granite dust

712

Mechanical properties and corrosion resistance of low-alloy steels in atmospheric conditions containing chloride

713

Mechanical properties and corrosion resistance of low-alloy steels in atmospheric conditions containing chloride

714

Mechanical properties and corrosion resistance of nanocrystalline ZrNxOy coatings on AISI 304 stainless steel by ion plating

715

Mechanical properties and corrosion resistance of steel X210CrW12 after semi-solid processing and heat treatment

716

Mechanical properties and crack growth behavior in poled ferroelectric PMN–PZT ceramics

717

Mechanical properties and creep behavior of liquefied wood polymer composites (LWPC)

718

Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution

719

Mechanical properties and cytotoxicity of 3Y-TZP bioceramics reinforced with Al2O3 particles

720

Mechanical properties and cyto-toxicity of new beta type titanium alloy with low melting points for dental applications

721

Mechanical properties and damage evaluation of a UK PBX

722

Mechanical properties and damage tolerance of Y2SiO5

723

Mechanical properties and damping behavior of woodceramics/ZK60A Mg alloy composite

724

Mechanical properties and decay resistance of wood–polymer composites prepared from fast growing species in Turkey

725

Mechanical properties and deep drawability of Mg–Gd–Y–Zr alloy rolling sheet at elevated temperatures

726

Mechanical properties and defect chemistry

727

Mechanical properties and defective effects of bcc V–4Cr–4Ti and V–5Cr–5Ti alloys by first-principles simulations

728

Mechanical properties and deformation behavior of Al–4Mg–0.4Sc–1.5Mm alloy at room temperature

729

Mechanical properties and deformation behavior of Al–4Mg–0.4Sc–1.5Mm alloy at room temperature

730

Mechanical properties and deformation behavior of Al–4Mg–0.4Sc–1.5Mm alloy at room temperature

731

Mechanical properties and deformation behavior of laminated Ni-(Ni2Al3+NiAl3) and Ni-(Ni3Al+NiAl) composites

732

Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents

733

Mechanical properties and deformation kinetics of bulk Cu–Al–Zn alloy subjected to rolling and annealing

734

Mechanical properties and deformation morphologies of covalently bridged multi-walled carbon nanotubes: Multiscale modeling

735

Mechanical properties and degradation behaviors of hyaluronic acid hydrogels cross-linked at various cross-linking densities

736

Mechanical properties and degree of conversion of etch-and-rinse and self-etch adhesive systems cured by a quartz tungsten halogen lamp and a light-emitting diode

737

Mechanical properties and determination of slip systems of the B2 YZn intermetallic compound Original Research Article

738

Mechanical properties and domain wall mobility of LaGaO3 perovskite over a first-order phase transition

739

Mechanical properties and dry-sliding tribological behavior of partially twinned Fe70Ni30 alloy

740

Mechanical properties and dual atmosphere tolerance of Ag–Al based braze

741

Mechanical properties and dual drug delivery application of poly(lactic-co-glycolic acid) scaffolds fabricated with a poly(β-amino ester) porogen

742

Mechanical properties and durability assessment of rice husk ash concrete

743

Mechanical properties and durability characteristics of polymer- and cement-based repair materials

744

Mechanical properties and durability of concrete made with high-volume fly ash blended cements using a coarse fly ash

745

Mechanical properties and durability of hemp-lime concretes

746

Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements

747

Mechanical properties and elastic constants of atomistic systems through the stress-fluctuation formalism Original Research Article

748

Mechanical properties and electrical conductance of different Al nanowires submitted to an homogeneous deformation: a first-principles simulation

749

Mechanical properties and electrical conductivity in a carbon nanotube reinforced silicon nitride composite

750

Mechanical properties and electrical conductivity of alumina/MWCNT and alumina/zirconia/MWCNT composites

751

Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene

752

Mechanical properties and electrical conductivity of Cu–Cr and Cu–Cr–4% SiC nanocomposites for thermo-electric applications

753

Mechanical properties and electrical conductivity of TiN–Al2O3 nanocomposites

754

Mechanical properties and electrical conductivity of W–B–C composites fabricated by in situ reaction

755

Mechanical properties and electrochemical characterisation of extruded doped cerium oxide for use as an electrolyte for solid oxide fuel cells

756

Mechanical properties and electronic structure of the incompressible rhenium carbides and nitrides: A first-principles study

757

Mechanical properties and electronic structures of compressed C60, C180 and C60@C180 fullerene molecules

758

Mechanical Properties and Environmental Assessment of Mortars Containing Metallic Oxides

759

Mechanical properties and enzymic degradation of thermoplastic and granular sago starch filled poly(ε-caprolactone)

760

Mechanical properties and erosion resistance of ceria nano-particle-doped ultrafine WC–12Co composite prepared by spark plasma sintering

761

Mechanical properties and erosion wear resistance of polyurethane matrix composites

762

Mechanical Properties and Failure Behavior of 3D-SiCf/SiCComposites with Different Interphases

763

MECHANICAL PROPERTIES AND FAILURE BEHAVIOUR OF GIGANTOCHLOA SCORTECHINII

764

Mechanical properties and failure characteristics of a recycled CFRP under tensile and cyclic loading

765

Mechanical properties and failure characteristics of ISB panel with metalllic pyramidal inner structures

766

Mechanical properties and failure mechanism of wood cell wall layers

767

Mechanical properties and failure mechanisms of friction stir spot welds of AA 6061-T4 sheets

768

Mechanical properties and failure modes of TiAl(Si)N single and multilayer thin films

769

Mechanical properties and fatigue behavior of vacuum-assist die cast AlMgSiMn alloy

770

Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al–Li alloy joints

771

Mechanical properties and fatigue life of ZrO2–Ta composites prepared by hot pressing

772

Mechanical properties and features of erosion of cermets

773

Mechanical properties and formability of an Mg–6%Li–1%Zn alloy thin sheet at elevated temperatures

774

Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets

775

Mechanical properties and fracture behavior of an Al–Mg–Sc–Zr alloy at ambient and subzero temperatures

776

Mechanical properties and fracture behavior of an NbSS/Nb5Si3 in-situ composite modified by Mo and Hf alloying

777

Mechanical properties and fracture behavior of an NbSS/Nb5Si3 in-situ composite modified by Mo and Hf alloying

778

Mechanical properties and fracture behavior of fibrous Al2O3/SiC ceramics

779

Mechanical properties and fracture behavior of hydrogen charged AHSS/UHSS grades at high- and low strain rate tests

780

Mechanical properties and fracture behavior of Mg–2.4Nd–0.6Zn–0.6Zr alloys fabricated by solid recycling process

781

Mechanical properties and fracture behavior of SiCw reinforced Al–12Ti alloy prepared by bechanical alloying technique

782

Mechanical properties and fracture behavior of SiCw reinforced Al–12Ti alloy prepared by bechanical alloying technique

783

Mechanical properties and fracture behaviors of epoxy composites with multi-scale rubber particles

784

Mechanical properties and fracture characteristics of high carbon steel after equal channel angular pressing

785

Mechanical properties and fracture modes of an advanced Ni–Co-base disk superalloy at elevated temperatures

786

Mechanical properties and friction of rubber vulcanizates: Aspects of crosslink structure

787

Mechanical properties and frictional behavior of a mica-filled poly(aryl ether ketone) composite

788

Mechanical properties and frost resistance of silica fume concrete

789

Mechanical properties and grain growth kinetics in magnesium alloy after accumulative compression bonding

790

Mechanical properties and grinding performance on aluminum-based metal matrix composites

791

Mechanical properties and hardening mechanism of Fe–Al–Ni single crystals containing NiAl precipitates Original Research Article

792

Mechanical properties and higher order structure of bacterial homo poly(3-hydroxybutyrate) melt spun fibers

793

Mechanical properties and high-temperature deformation behaviour of particle-strengthened NiAl alloys

794

Mechanical properties and high-temperature deformation behaviour of particle-strengthened NiAl alloys

795

Mechanical properties and histological evaluation of sintered β-Ca2P2O7 with Na4P2O7 · 10H2O addition

796

Mechanical properties and hot-rolled microstructures of a low carbon bainitic steel with Cu–P alloying

797

Mechanical properties and humidity absorption measured through impedance spectroscopy in clays used for adobe production

798

Mechanical properties and hygroscopicity behavior of compressed earth block filled by date palm fibers

799

Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings

800

Mechanical properties and in situ crack growth observation of SiC/SiC composites

801

Mechanical properties and in vitro bioactivity of injectable and self-setting calcium sulfate/nano-HA/collagen bone graft substitute

802

Mechanical properties and in vitro biocompatibility of porous zein scaffolds

803

Mechanical properties and in vitro cell compatibility of hydroxyapatite ceramics with graded pore structure

804

Mechanical properties and in vitro degradation of electrospun bio-nanocomposite mats from PLA and cellulose nanocrystals

805

Mechanical properties and in vitro evaluation of bioactivity and degradation of dexamethasone-releasing poly-d-l-lactide/nano-hydroxyapatite composite scaffolds

806

Mechanical properties and indentation-induced damage of high-quality ZnO microwires

807

Mechanical properties and in-situ toughening mechanism of pressurelessly densified ZrB2–TiB2 ceramic composites

808

Mechanical properties and interface toughness of FeCo thin films on Ti–6Al–4V

809

Mechanical properties and interface toughness of metal filled nanoporous anodic aluminum oxide coatings on aluminum

810

Mechanical properties and interfaces of zirconia/nickel in micro - and nanocomposites

811

Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures

812

Mechanical properties and interphase boundary composition of ferritic steels strengthened by yttrium and titanium disperse oxides

813

Mechanical properties and interphase boundary composition of ferritic steels strengthened by yttrium and titanium disperse oxides

814

Mechanical properties and interrelationships of poly(methyl methacrylate) following hydration over saturated salts

815

Mechanical properties and ion irradiation of bulk amorphous Zr55Cu30Al10Ni5 alloy

816

Mechanical properties and ionic conductivity of electrospun quaternary ammonium ionomers

817

Mechanical properties and lifetime predictions for Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane material

818

Mechanical properties and machining performance of Ti1−xAlxN-coated cutting tools

819

Mechanical properties and martensitic transformations in nanocrystalline Ti49.4Ni50.6 alloy produced by high-pressure torsion

820

Mechanical properties and material removal characteristics of soft-brittle HgCdTe single crystals

821

Mechanical properties and mechanical behaviour of SiC dense-porous laminates

822

Mechanical properties and metallographic analysis of plasma spray APS - Ni5.5wt.%Al5wt.%Mo coatings

823

Mechanical properties and micro-deformation of sintered metallic hollow sphere structure

824

Mechanical properties and micro-fracture behaviors of flat braided composites with a circular hole

825

Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings

826

Mechanical properties and microstructural analysis of Al–Si–Mg/carbonized maize stalk waste particulate composites

827

Mechanical properties and microstructural characterization of a superplastic TiAl alloy

828

Mechanical properties and microstructural characterization of a superplastic TiAl alloy

829

Mechanical properties and microstructural characterizations of potassium doped tungsten

830

Mechanical properties and microstructural evaluation of AA5013 aluminum alloy treated in the semi-solid state by SIMA process

831

Mechanical properties and microstructural evolution during multi-pass ECAR of Al 1100–O alloy

832

Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding

833

Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature

834

Mechanical properties and microstructural evolution of alumina–zirconia nanocomposites by microwave sintering

835

Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering

836

Mechanical properties and microstructural evolution of TiN coatings alloyed with Al and Si

837

Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy

838

Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy

839

Mechanical properties and microstructural investigations of TIG welded 40 mm and 60 mm thick SS 316L samples for fusion reactor vacuum vessel applications

840

Mechanical properties and microstructural stability of 11Cr-ferritic/martensitic steel cladding under irradiation

841

Mechanical properties and microstructure characterization of coated AM2 Al 6061-T6 mats exposed to simulated thermal blast

842

Mechanical properties and microstructure characterization of zirconia nanoparticles glass composites for SOFC sealant

843

Mechanical properties and microstructure evolution of 1050 aluminum severely deformed by ECAP to 16 passes

844

Mechanical properties and microstructure evolution of the nano WC–Co coatings fabricated by detonation gun spraying with post heat treatment

845

Mechanical properties and microstructure evolutions of multilayered Al–Cu composites produced by accumulative roll bonding process and subsequent annealing

846

Mechanical properties and microstructure for 3 mol% yttria doped zirconia/silicon carbide nanocomposites

847

Mechanical properties and microstructure in low-activation martensitic steels F82H and Optimax after 800-MeV proton irradiation

848

Mechanical properties and microstructure of 2.5D (shallow straight-joint) quartz fibers-reinforced silica composites by silicasol-infiltration-sintering

849

Mechanical properties and microstructure of 3D orthogonal quartz fiber reinforced silica composites fabricated by silicasol-infiltration-sintering

850

Mechanical properties and microstructure of a Mg alloy AZ31 prepared by equal-channel angular pressing

851

Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite

852

MECHANICAL PROPERTIES AND MICROSTRUCTURE OF AA 1050 PROCESSED BY ECAP CORRELATED TO THE STRAIN TENSOR

853

Mechanical properties and microstructure of Al2O3/mullite composite

854

Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr2O3

855

Mechanical properties and microstructure of alkali activated Pisha sandstone geopolymer composites

856

Mechanical properties and microstructure of AlMg3 irradiated in SINQ Target-3

857

Mechanical properties and microstructure of Al–Mg–Mn–Zr alloy processed by equal channel angular pressing at elevated temperature

858

Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases

859

Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases

860

Mechanical properties and microstructure of an Al2O3–SiC–TiC composite

861

Mechanical properties and microstructure of an Al2O3–SiC–TiC composite

862

Mechanical properties and microstructure of as-extruded AZ31 Mg alloy at high temperatures

863

Mechanical properties and microstructure of bioactive ORMOSILs containing silica particles

864

Mechanical properties and microstructure of biomorphic silicon carbide ceramics fabricated from wood precursors

865

Mechanical properties and microstructure of carbon fibre reinforced carbon materials produced by chemical vapour infiltration

866

Mechanical properties and microstructure of carbon fibre reinforced carbon materials produced by chemical vapour infiltration

867

Mechanical properties and microstructure of carbon fibre reinforced carbon materials produced by chemical vapour infiltration

868

Mechanical properties and microstructure of cast oxide-dispersion-strengthened aluminum

869

Mechanical properties and microstructure of cast oxide-dispersion-strengthened aluminum

870

Mechanical properties and microstructure of centrifugally compacted alumina and hot-isostatically-pressed alumina

871

Mechanical properties and microstructure of centrifugally compacted alumina and hot-isostatically-pressed alumina

872

Mechanical properties and microstructure of commercial amorphous golf club heads made of Zr–Ti–Cu–Ni–Be bulk metallic glass

873

Mechanical properties and microstructure of fast fired tiles made with blends of kaolin and olivine powders

874

Mechanical properties and microstructure of friction stir welded tailor-made blanks

875

Mechanical properties and microstructure of frozen carrots during storage as affected by blanching in water and sugar solutions

876

Mechanical properties and microstructure of gas tungsten arc welded magnesium AZ91D plates

877

Mechanical properties and microstructure of gas tungsten arc welded magnesium AZ91D plates

878

Mechanical Properties and Microstructure of Heat-set Whey Protein Emulsion Gels: Effect of Emulsifiers

879

Mechanical properties and microstructure of helium-implanted beryllium

880

Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °C

881

Mechanical properties and microstructure of hydrogen-charged Gum metal

882

Mechanical properties and microstructure of hypomineralised enamel of permanent teeth

883

Mechanical properties and microstructure of joints in AZ31 thin sheets obtained by friction stir welding using “pin” and “pinless” tool configurations

884

Mechanical properties and microstructure of nanocrystalline nickel-carbon nanotube composites produced by electrodeposition

885

Mechanical properties and microstructure of new magnesium—lithium base alloys

886

Mechanical properties and microstructure of new magnesium—lithium base alloys

887

Mechanical properties and microstructure of porous BN–SiO2–Si3N4 composite ceramics

888

Mechanical properties and microstructure of resistance spot welded severely deformed low carbon steel

889

Mechanical properties and microstructure of Si/SiC materials derived from native wood

890

Mechanical properties and microstructure of Si/SiC materials derived from native wood

891

Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)Al-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing

892

Mechanical properties and microstructure of three Russian ferritic/martensitic steels irradiated in BN-350 reactor to 50 dpa at 490 °C

893

Mechanical properties and microstructure of TiN/TZP nanocomposites

894

Mechanical properties and microstructure of two-dimensional carbon fiber reinforced zirconia composites prepared by hot-pressing

895

Mechanical properties and microstructure of ULCB steels affected by thermomechanical rolling, quenching and tempering

896

Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling

897

Mechanical Properties and Microstructure of X120 Grade High Strength Pipeline Steel Original Research Article

898

Mechanical properties and microstructure of ZrO2–TiN–Al2O3 composite ceramics

899

Mechanical properties and microstructure of in situ synthesized ZrB2-ZrN1−x composites

900

Mechanical properties and microstructures in F82H steel irradiated under alternating temperature

901

Mechanical properties and microstructures of 1100 aluminum subjected to dry machining

902

Mechanical properties and microstructures of 1100 aluminum subjected to dry machining

903

Mechanical properties and microstructures of 1100 aluminum subjected to dry machining

904

Mechanical properties and microstructures of 2D Cf/ZrC–SiC composites using ZrC precursor and polycarbosilane

905

Mechanical properties and microstructures of 6082-T6 joint welded by twin wire metal inert gas arc welding with the SiO2 flux

906

Mechanical properties and microstructures of a magnesium alloy gas tungsten arc welded with a cadmium chloride flux

907

Mechanical properties and microstructures of Al–1Fe–(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering

908

Mechanical properties and microstructures of Al2O3–5 vol.% YAG composites

909

Mechanical properties and microstructures of bio-inert layers of chrome oxide coatings deposited by the APS process

910

Mechanical properties and micro-structures of calcium aluminate based ultra high strength cement

911

Mechanical properties and microstructures of cast Ti–Cu alloys

912

Mechanical properties and microstructures of Cf/SiC–ZrC composites using T700SC carbon fibers as reinforcements

913

Mechanical properties and microstructures of China low activation martensitic steel compared with JLF-1

914

Mechanical properties and microstructures of glass-ionomer cements

915

Mechanical properties and microstructures of high-chromium V–Cr–Ti type alloys

916

Mechanical properties and microstructures of hot-pressed MgAlON–BN composites

917

Mechanical properties and microstructures of hybrid ultrasonic resistance brazing of WC-Co/BeCu

918

Mechanical properties and microstructures of low cost β titanium alloys for healthcare applications

919

Mechanical properties and microstructures of new Ti–Fe–Ta and Ti–Fe–Ta–Zr system alloys

920

Mechanical properties and microstructures of reaction sintered mullite–zirconia composites in the presence of an additive — dysprosia

921

Mechanical properties and microstructures of β Ti–25Nb–11Sn ternary alloy for biomedical applications

922

Mechanical properties and modeling of drug release from chlorhexidine-containing etch-and-rinse adhesives

923

Mechanical properties and modelling of a hydrophilic composite used as a biomaterial

924

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

925

Mechanical properties and morphological studies of C/C–SiC composites

926

Mechanical properties and morphology of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized by transesterification

927

Mechanical Properties and Morphology of Blends of Hyperbranched Polymer with Polypropylene and Poly(vinyl chloride)

928

Mechanical properties and morphology of nylon 11/tetrapod-shaped zinc oxide whisker composite

929

Mechanical properties and morphology of papers prepared from single-walled carbon nanotubes functionalized with aromatic amides Original Research Article

930

Mechanical properties and multi-scale modeling of nanocrystalline materials Original Research Article

931

Mechanical properties and nanostructures in a duplex stainless steel subjected to equal channel angular pressing

932

Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials

933

Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials

934

Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures

935

Mechanical properties and osteocompatibility of novel biodegradable alanine based polyphosphazenes: Side group effects

936

Mechanical properties and osteoconductivity of porous bioactive titanium

937

Mechanical properties and oxidation behavior of silicon carbide–molybdenum silicides composites

938

Mechanical properties and oxidation behavior of the Ti–24Al–14Nb–3V–0.5Mo alloy sheet

939

Mechanical properties and oxidation behaviour of plasma sprayed functionally graded zirconia–alumina thermal barrier coatings

940

Mechanical properties and oxidation behaviour of two-phase iron aluminium alloys with Zr(Fe,Al)2 Laves phase or Zr(Fe,Al)12 τ1 phase

941

Mechanical properties and oxidation characteristics of TiNiAl(Nb) intermetallics

942

Mechanical properties and oxidation resistance of plasma-sprayed multilayered Al2O3/ZrO2 thermal barrier coatings

943

Mechanical properties and oxidation resistance of SiCf/CVI-SiC composites with PIP-SiC interphase

944

Mechanical properties and oxidation resistance of α-alumina/multi-walled carbon nanotube composite ceramics

945

Mechanical properties and phase composition of potential biodegradable Mg–Zn–Mn–base alloys with addition of rare earth elements

946

Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP

947

Mechanical properties and pitting corrosion behaviour of 316L stainless steel parts obtained by a modified metal injection moulding process

948

Mechanical properties and platelet adhesion behavior of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition

949

Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites

950

Mechanical properties and Raman characterization of amorphous diamond films as a function of film thickness

951

Mechanical properties and rapid consolidation of binderless nanostructured tantalum carbide

952

Mechanical properties and reactions of PBT/PTW blends

953

Mechanical properties and residual stresses changing on 00Cr12 alloy by nanoseconds laser shock processing at high temperatures

954

Mechanical properties and resistance to hydrothermal aging of ceria- and yttria-doped tetragonal zirconia ceramics

955

Mechanical properties and resistance to low temperature degradation of surface nitrided 3Y-TZP

956

Mechanical Properties and Retained Austenite Transformation Mechanism of TRIP-Aided Polygonal Ferrite Matrix Seamless Steel Tube Original Research Article

957

Mechanical properties and reverse osmosis performance of interfacially polymerized polyamide thin films

958

Mechanical properties and rheology of polyalkenoate cements using various low-cost fillers

959

Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles Original Research Article

960

Mechanical properties and scratch test resistance of nickel–boron coated aluminium alloy after heat treatments

961

Mechanical properties and scratch test studies of new ultra-hard AlMgB14 modified by TiB2

962

Mechanical properties and size stability of wheat straw and recycled LDPE composites coupled by waterborne coupling agents

963

Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet

964

Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blends

965

Mechanical Properties and Strength of Aged Cast Iron Water Pipes

966

Mechanical properties and strength retention of carbon fibre-reinforced liquid crystalline polymer (LCP/CF) composite: An experimental study on rabbits

967

Mechanical properties and structural stability of perovskite-type, oxygen-permeable, dense membranes Original Research Article

968

Mechanical properties and structure of Gd-doped PbTe

969

Mechanical properties and structure of silkworm cocoons: A comparative study of Bombyx mori, Antheraea assamensis, Antheraea pernyi and Antheraea mylitta silkworm cocoons

970

Mechanical properties and structure of Strombus gigas, Tridacna gigas, and Haliotis rufescens sea shells: A comparative study

971

Mechanical properties and structure of swollen crosslinked high amylose starch tablets

972

Mechanical properties and structure of the biological multilayered material system, Atractosteus spatula scales

973

Mechanical properties and structure of unripe oranges during processing of “spoon sweets” Original Research Article

974

Mechanical Properties and Structures of Oilwell Cement Stone Reinforced with Siliceous Whisker

975

Mechanical properties and styrene emission levels of a UV-cured glass-fibre/vinylester composite

976

Mechanical properties and TEM examination of RAFM steels irradiated up to 70 dpa in BOR-60

977

Mechanical properties and temperature dependence of an air plasma-sprayed NiCoCrAlY bondcoat

978

Mechanical properties and texture of a superplastically deformed AZ31 magnesium alloy

979

Mechanical properties and the evolution of matrix molecules in PTFE upon irradiation with MeV alpha particles

980

Mechanical properties and the laminate structure of Arapaima gigas scales

981

Mechanical properties and the microstructure of the plasma-sprayed ZrO2Y2O3 / ZrO2Y2O3CoNiCrAIY/ CoNiCrAIY coating

982

Mechanical properties and their influence to transport property of multifilamentary Bi2223 tape

983

Mechanical properties and their microstructure evaluation in the thixoforming process of semi-solid aluminum alloys

984

Mechanical properties and thermal behaviour of PEGDMA hydrogels for potential bone regeneration application

985

Mechanical properties and thermal shock behaviour of alumina–mullite–zirconia and alumina–mullite refractory materials by slip casting

986

Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition

987

Mechanical properties and thermal stability of Al-23Si-8Fe-1Cr and Al-23Si-8Fe-5Mn alloys prepared by powder metallurgy

988

Mechanical properties and thermal stability of Al–Fe–Ni alloys prepared by centrifugal atomisation and hot extrusion

989

Mechanical properties and thermal stability of ZnAl2O4-coated aluminum borate whiskers reinforced 2024Al composite

990

Mechanical properties and thermomechanical stability of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition

991

Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites

992

Mechanical Properties and Transformation Behavior of NiTiNb Shape Memory Alloys

993

Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol-gel route on stainless steel

994

Mechanical properties and tribology of Si3N4–TiB2 ceramic composites produced by hot pressing and hot isostatic pressing

995

Mechanical Properties and Viability of Japanese Radish Cylinders immersed in Sodium Chloride Solutions

996

Mechanical properties and water vapor transmission in some blends of cassava starch edible films

997

MECHANICAL PROPERTIES AND WATER VAPOUR PERMEABILITY OF FILM FROM HARUAN (Channa striatus) AND FUSIDIC ACID SPRAY FOR WOUND DRESSING AND WOUND HEALING

998

Mechanical properties and water vapour permeability of hydrolysed collagen–cocoa butter edible films plasticised with sucrose

999

Mechanical properties and wear and corrosion resistance of electrodeposited Ni–Co/SiC nanocomposite coating

1000

Mechanical properties and wear behavior of Al–2 wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion