ليست عنوان مقالات لاتين Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing MODELING OF INITIAL INTENSE CONTRACTION IN SAND-STRUCTURE INTERFACES

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing

2

Modeling of a circulating fluidized bed for ammoxidation of propane to acrylonitrile

3

Modeling of a coal-fired slagging combustor: Development of a slag submodel

4

Modeling of a combined ion transport and porous membrane reactor for oxy-combustion

5

Modeling of a compact plate-fin reformer for methanol steam reforming in fuel cell systems

6

Modeling of a conceptual self-sustained liquid fuel vaporization – combustion system with radiative output using inert porous media

7

Modeling of a confinement bypass accident with CONSEN, a fast-running code for safety analyses in fusion reactors

8

Modeling of a continuous fluidized bed dryer using artificial neural networks

9

Modeling of a deformable manikin neck for multibody dynamic simulation

10

Modeling of a domestic frost-free refrigerator

11

Modeling of a Dynamic Magneto-Fluid Seal in the Presence of a Pressure Drop

12

Modeling of a flat plate membrane-distillation system for liquid desiccant regeneration in air-conditioning applications

13

Modeling of a flat-plate solar reactor. Degradation of formic acid by the photo-Fenton reaction

14

Modeling of a front wall fired utility boiler for different operating conditions Original Research Article

15

Modeling of a gas catalytic chemical reaction, taking into account the diffusion in the adsorbed phase

16

Modeling of a gas–liquid reactor in batch conditions. Study of the intermediate regime when part of the reaction occurs within the film and part within the bulk

17

Modeling of a generalized newtonian flow through channels with permeable wall

18

Modeling of a glucose sensitive composite membrane for closed-loop insulin delivery

19

Modeling of a green certificate market

20

Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks

21

Modeling of a hazelnut dryer assisted heat pump by using artificial neural networks

22

Modeling of a heat-coupled catalytic reactor with co-current oxidation and conversion flows

23

Modeling of a helicon plasma source

24

Modeling of a hemispherical inductively coupled plasma using neural network

25

Modeling of a Human Circadian Mutation Yields Insights into Clock Regulation by PER2

26

Modeling of a hydronic ceiling system and its environment as energetic auditing tool

27

Modeling of a linear PM Machine including magnetic saturation and end effects: maximum force-to-current ratio

28

Modeling of a locking mechanism between two rough surfaces under cyclic loading

29

Modeling of a locking mechanism between two rough surfaces under cyclic loading

30

Modeling of a manufacturing cell design problem with fuzzy multi-objective parametric programming

31

Modeling of a mechanical cooling system with variable cooling capacity by using artificial neural network

32

Modeling of a membrane-based absorption heat pump

33

Modeling of a membraneless single-chamber microbial fuel cell with molasses as an energy source

34

Modeling of a micro auto-electrolytic cell for hydrogen production

35

Modeling of a microbial growth experiment with bioclogging in a two-dimensional saturated porous media flow field

36

Modeling of a microfluidic electrochemical cell for CO2 utilization and fuel production

37

Modeling of a miniaturized mass spectrometer with field emission electron source

38

Modeling of a multilane-multiple intersection based on queue theory and standard approach techniques

39

Modeling of a Multiply Jointed Voussoir Beam in the Centrifuge

40

Modeling of a New Percutaneous Orthopedic Implant System to Control the Post-surgery Osseointegration Process

41

Modeling of a new recuperative thermoelectric cycle for a tumble dryer

42

MODELING OF A NEW STRUCTURE OF PRECISION AIR CONDITIONING SYSTEM USING SECONDARY CONDENSER FOR RH REGULATION

43

Modeling of a new ZVS bi-directional dc-dc converter

44

Modeling of a non-isothermal FCC riser

45

Modeling of a nonlinear thermochemical energy storage by adsorption on zeolites

46

Modeling of a novel fish passage-way using coupled spatially varied flow

47

Modeling of a Novel Hybrid Drivetrain Based on Hybridized Ball Continuously Variable Transmission

48

Modeling of a Novel Magneto-electro-elastic Energy Harvesting System Subjected to Applied Electric Voltage with Simultaneous Use as an Electrical Actuator System

49

Modeling of a novel multi-stage bubble column scrubber for flue gas desulfurization

50

Modeling of a novel spool compressor with multiple vapor refrigerant injection ports

51

Modeling of a novel Trombe wall with PV cells

52

Modeling of a passive distributed vibration control device using a superposition technique

53

Modeling of a passive DMFC operating with neat methanol

54

Modeling of a pilot-scale fixed-bed reactor for iron-based Fischer–Tropsch synthesis: Two-dimensional approach for optimal tube diameter

55

Modeling of a PIN diode RF switch for reconfigurable antenna application

56

Modeling of a planar FEL amplifier with a sheet relativistic electron beam

57

Modeling of a planar FEL amplifier with a sheet relativistic electron beam

58

Modeling of a Power Conversion System with RELAP5-3D/K and Associated Application to the Feedwater Blowdown Licensing Analysis for the ABWR Containment Design

59

Modeling of a pressure modulated desalination system using bond graph methodology

60

Modeling of a pressure sensor based on an array of wedge emitters

61

Modeling of a Probabilistic Re-Entrant Line Bounded by Limited Operation Utilization Time

62

Modeling of a proton exchange membrane fuel cell based on the hybrid particle swarm optimization with Levenberg–Marquardt neural network

63

Modeling of a p-type resistive gas sensor in the presence of a reducing gas

64

Modeling of a quantum cascade laser operating at 1 THz

65

Modeling of a radial flow hollow fiber module and estimation of model parameters for aqueous multi-component mixture using numerical techniques

66

Modeling of a radial flow hollow fiber module and estimation of model parameters using numerical techniques

67

Modeling of a rail suspension system to investigate vertical vibration and effective parameters on it

68

Modeling of a residential house coupled with a dual source heat pump using TRNSYS software

69

Modeling of a rotor speed transient response with radial rubbing

70

Modeling of a saturated switched reluctance motor using an operating point analysis and the unsaturated torque equation

71

Modeling of a Schottky Diode in CMOS Process with a Flexible “Open-Through” On-Chip De-embedding Method

72

Modeling of a semi-hermetic CO2 reciprocating compressor including lubrication submodels for piston rings and bearings

73

Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena

74

Modeling of a single-phase photovoltaic inverter

75

Modeling of a SiO rSi 001/ structure including step and terrace 2 configurations

76

Modeling of a smoldering cigarette

77

Modeling of a solar and heat pump sludge drying system

78

Modeling of a solar powered absorption cycle for Abu Dhabi

79

Modeling of a solid oxide fuel cell power plant using an ensemble of neural networks based on a combination of the adaptive particle swarm optimization and Levenberg–Marquardt algorithms

80

Modeling of a space cooling system with underground storage

81

Modeling of a space flexible probe–cone docking system based on the Kane method

82

Modeling of a space heating and cooling system with seasonal energy storage

83

Modeling of a spiral-wound module and estimation of model parameters using numerical techniques Original Research Article

84

Modeling of a split type air conditioner with integrated water heater

85

Modeling of a station in CVS and an approach to analyze distributions of time intervals of vehicles departed from the station

86

Modeling of a substrate thermomechanical behavior during plasma spraying

87

Modeling of a synchronous reluctance machine accounting for space harmonics in view of torque ripple minimization Original Research Article

88

Modeling of a teamʹs decision-making process

89

Modeling of a tempered martensitic hot work tool steel behavior in the presence of thermo-viscoplastic coupling

90

Modeling of a thermal energy storage system coupled with combined heat and power generation for the heating requirements of a University Campus

91

Modeling of a thermomechanical process chain for sheet steels

92

Modeling of a thermomechanical process chain for sheet steels

93

Modeling of a three-compartment membrane electrodialysis in H2SO4–(NH4)2SO4–NH3·H2O system

94

Modeling of a Three-Phase Industrial Batch Reactor Using a Hybrid First-Principles Neural-Network Model

95

Modeling of a transition to diffusionless dendritic growth in rapid solidification of a binary alloy

96

Modeling of a transmission line protection relaying scheme using Petri nets

97

Modeling of a transmission network protection system using Petri nets

98

Modeling of a Transpiring Wall Reactor for the Supercritical Water Oxidation Using Simple Flow Patterns: Comparison to Experimental Results

99

Modeling of a Tröger’s tweezer and its complexation properties

100

Modeling of a two-phase CO2-filled vertical borehole for geothermal heat pump applications

101

Modeling of a two-stage draw process

102

Modeling of a two-stage magnetic refrigerator with wavy-structure gadolinium heat exchangers

103

Modeling of a two-step solar hydrogen production plant

104

Modeling of a Vanadium Redox Flow Battery for power system dynamic studies

105

Modeling of a violaxanthin–chlorophyll b chromophore pair in its LHCII environment using CAM-B3LYP

106

Modeling of Abrasive Wear Behaviour of Natural Fiber (Rice Husk Ceramic) Epoxy Composite Using Response Surface Methodology.

107

Modeling of Accumulated Energy Ratio (AER) for Estimating Liquefaction Potential using Artificial Neural Network (ANN) and Gene Expression Programming (GEP) (using Data from Tabriz)

108

Modeling of ACL impingement against the intercondylar notch

109

Modeling of acoustic wave propagation in time-domain using the discontinuous Galerkin method – A comparison with measurements

110

Modeling of activated carbon preparation from Spanish anthracite based on ANFIS structure

111

Modeling of activated sludge plants treatment efficiency with PLSR: a process analytical case study

112

Modeling of active holonic control systems for intelligent buildings

113

Modeling of active transport systems

114

Modeling of adaptive composites including debonding

115

Modeling of Adaptive Load Balancing with Hybrid F/CDMA and Sectorization Schemes in Mobile Communication Networks

116

Modeling of adatom vibrational populations and recombination rates in exoergic reactions

117

Modeling of adiabatic moving-bed reactor for dehydrogenation of isobutane to isobutene Original Research Article

118

Modeling of adsorbent based hydrogen storage systems

119

Modeling of adsorption and phase diagrams for stepped surfaces: Transfer matrix approach

120

Modeling of adsorption equilibria in supercritical fluids

121

Modeling of adsorption heat pumps with heat regeneration

122

Modeling of adsorption in hydrophobic interaction chromatography systems using a preferential interaction quadratic isotherm

123

Modeling of adsorption isotherms and competitive adsorption breakthroughs of Nicotine/Pyridine removal from aqueous solution by activated Montmorillonite

124

Modeling of adsorption isotherms and kinetics of a tannery dye onto an activated carbon prepared from an agricultural by-product

125

Modeling of adsorption isotherms of water vapor on Tunisian olive leaves using statistical mechanical formulation

126

Modeling of adsorption of toxic chromium on natural and surface modified lightweight expanded clay aggregate (LECA)

127

Modeling of adsorption storage of hydrogen on activated carbons

128

Modeling of advanced alkaline electrolyzers: a system simulation approach

129

Modeling of Advanced High Strength Steels with the realistic microstructure–strength relationships

130

Modeling of aerated stirred tanks with shear-thinning power law liquids

131

MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION

132

MODELING OF AERATED UPFLOW FIXED BED REACTORS FOR NITRIFICATION

133

Modeling of aerobic biodegradation of feces using sawdust as a matrix

134

Modeling of aerosol deposition of titania thin films

135

Modeling of aerosol dynamics along a vertical flat plate

136

Modeling of aerosol dynamics in a laminar flow reactor: A multicomponent 2-D bimodal approach

137

Modeling of aerosol dynamics with MADE: Cloud contributions

138

Modeling of aerosol formation during biomass combustion for various furnace and boiler types

139

Modeling of agglomerate behavior under shear deformation: effect of velocity field of a high shear mixer granulator on the structure of agglomerates

140

Modeling of agglomeration inside a droplet with nanosuspensions in an acoustic field

141

Modeling of aging process for supersaturated solution treated of Al–3wt%Mg alloy

142

Modeling of AGS and recrystallized fraction of microalloyed medium carbon steel during hot deformation

143

Modeling of Air Pollutants’ Dispersion by Means of CALMET/CALPUFF (Case Study: District 7 in Tehran city)

144

Modeling of air region height in the casting process for preparing UO2 kernels

145

Modeling of Air Relative Humidity Effect on Adhesion Force in Manipulation of Nano-Particles and its Application in AFM

146

Modeling of air sparging of VOC-contaminated soil columns

147

Modeling of airborne particle exposure and effectiveness of engineering control strategies

148

Modeling of air-gap membrane distillation process: A theoretical and experimental study

149

Modeling of Alcator C-Mod divertor baffling experiments

150

Modeling of aldopyranosyl ring puckering with MM3 (92)

151

Modeling of alkaline scale formation in falling film horizontal-tube multiple-effect distillers Original Research Article

152

Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

153

Modeling of ALOS and COSMO-SkyMed satellite data at Mt Etna: Implications on relation between seismic activation of the Pernicana fault system and volcanic unrest

154

Modeling of alpha mass-efficiency curve

155

Modeling of alpha mass-efficiency curve

156

Modeling of altered layer formation during reactive ion etching of GaAs

157

Modeling of Alternative Pathways of Electron Transport to Photosystem I in Isolated Thylakoids

158

Modeling of altitude effects on AC flashover of polluted high voltage insulators

159

Modeling of aluminum alloy profile extrusion process using finite volume method

160

Modeling of aluminum alloy sheets based on new anisotropic yield functions

161

Modeling of amino acid nanofiltration by irreversible thermodynamics

162

Modeling of ammonia combustion at low pressure

163

Modeling of ammonia dry deposition to a pocosin landscape downwind of a large poultry facility

164

Modeling of Ammonia Emission in the Petrochemical Industry

165

Modeling of ammonium dinitramide (ADN) monopropellant combustion with coupled condensed and gas phase kinetics

166

Modeling of ammonium lactate recovery and impurity removal from simulated fermentation broth by nanofiltration

167

Modeling of ammonothermal growth of gallium nitride single crystals

168

Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors

169

Modeling of an Airlift Reactor with Floating Solids for Wastewater Treatment

170

Modeling of an anode-supported Ni-YSZNi-ScSZScSZ LSM-ScSZ multiple layers SOFC cell: Part II. Simulations and discussion

171

Modeling of an anode-supported Ni–YSZNi–ScSZScSZLSM–ScSZ multiple layers SOFC cell: Part I. Experiments, model development and validation

172

Modeling of an APU system based on MCFC

173

Modeling of an axial flow, spherical packed-bed reactor for naphtha reforming process in the presence of the catalyst deactivation

174

Modeling of an Eco-Epidemiological system Involving Various Epidemic Diseases with Optimal Harvesting

175

Modeling of an EHD corona flow in nitrogen gas using an asymmetric capacitor for propulsion

176

Modeling of an ejector refrigerating system operating in dimensioning and off-dimensioning conditions with the working fluids R142b and R600a

177

Modeling of an EMP conducted environment

178

Modeling of an EMP simulator using a 3-D FDTD code

179

Modeling of an FAU-type zeolite membrane reactor for the catalytic dehydrogenation of cyclohexane

180

Modeling of an ice-on-coil thermal energy storage system

181

Modeling of an Impinging Oxygen Jet on Molten Bath Surface in 150 t EAF Original Research Article

182

Modeling of an industrial double-roll crusher of a urea granulation circuit

183

Modeling of an industrial fixed bed reactor based on lumped kinetic models for hydrogenation of pyrolysis gasoline

184

Modeling of an Industrial Full-Scale Plant for Biological Treatment of Textile Wastewaters: Application of Neural Networks

185

Modeling of an Industrial Riser in the Fluid Catalytic Cracking Unit

186

Modeling of an insurance system and its large deviations analysis

187

Modeling of an integrated active feedback preamplifier in a 0.25 (mu)m CMOS technology at cryogenic temperatures

188

Modeling of an integrated fermentation/membrane extraction process for the production of 2-phenylethanol and 2-phenylethylacetate

189

Modeling of an integrated solar system

190

Modeling of an integrated two-stage biomass gasifier and solid oxide fuel cell system

191

Modeling of an Intelligent e-Consent System in a Healthcare Domain

192

Modeling of an intermittent solar absorption refrigeration system operating with ammonia–lithium nitrate mixture

193

Modeling of an inventory system with multi variate demand under volume flexibility and learning

194

Modeling of an inverted pendulum based on fuzzy clustering techniques

195

Modeling of an island grid

196

Modeling of an obstacle detection sensor for horizontal directional drilling (HDD) operations

197

Modeling of an oxygen-staged membrane wall gasifier: effects of secondary oxygen

198

Modeling of an RO water desalination unit using neural networks

199

Modeling of an Upper-Convected-Maxwell Fluid Hammer Phenomenon in Pipe System

200

Modeling of Anaerobic Digestion of Complex Substrates

201

Modeling of analog blocks by using standard hardware description language

202

Modeling of analytical peaks: Peaks properties and basic peak functions Original Research Article

203

Modeling of anchor bolt pullout in concrete based on a heterogeneous assumption

204

MODELING OF ANECHOIC CHAMBER USING A BEAM-TRACING TECHNIQUE

205

Modeling of anisotropic inelasticity in pearlitic steel at large strains due to deformation induced substructure evolution

206

Modeling of anisotropic plastic behavior of ferritic stainless steel sheet

207

Modeling of anisotropic plastic behavior of ferritic stainless steel sheet

208

Modeling of anisotropic softening phenomena: Application to soft biological tissues

209

Modeling of anisotropic tensile and cyclic viscoplastic behavior of a nickel-base directionally solidified superalloy

210

Modeling of annual oscillations and 1/f-noise of daily river discharges

211

Modeling of anodic dissolution of U–Pu–Zr ternary alloy in the molten LiCl–KCl electrolyte Original Research Article

212

Modeling of anomalous thermodynamic properties using lattice dynamics and inelastic neutron scattering

213

Modeling of aqueous amino acid and polypeptide solutions with PC-SAFT

214

Modeling of Aqueous BTEX Adsorption in Column and Multistage Adsorbers

215

Modeling of Aqueous Electrolyte Solutions with Perturbed-Chain Statistical Associated Fluid Theory

216

Modeling of arsenic immobilization by zero valent iron

217

Modeling of Artemisia sieberi Besser Habitat Distribution Using Maximum Entropy Method in Desert Rangelands

218

Modeling of arterial stenosis and its applications to blood diseases

219

Modeling of ash deposition in large-scale combustion facilities burning pulverized coal

220

Modeling of a-Si/poly-Si and a-Si/poly-Si/poly-Si stacked solar cells

221

Modeling of asphaltene and other heavy organic depositions

222

Modeling of asphaltene deposition in oil reservoirs during primary oil recovery

223

MODELING OF ASPHALTENE DEPOSITION IN PIPELINES

224

Modeling of asphaltene precipitation from n-alkane diluted heavy oils and bitumens using the PC-SAFT equation of state

225

Modeling of asphaltene precipitation utilizing Association Equation of State

226

Modeling of assisted cold start processes with anode catalytic hydrogen–oxygen reaction in proton exchange membrane fuel cell

227

Modeling of asymmetric membrane formation by a combination of dry/wet phase inversion processes Original Research Article

228

Modeling of asymmetric membrane formation by dry-casting method

229

Modeling of asymmetric redeposition distribution between inner and outer regions of the W-shaped divertor in JT-60U

230

Modeling of atmosphere stratification in containments of nuclear power plants using lumped-parameter code

231

Modeling of atmospheric temperature fluctuations by translations of oscillatory random processes with application to spacecraft atmospheric re-entry

232

Modeling of atmospheric wind speed sequence using a lognormal continuous stochastic equation

233

Modeling of ATP-mediated signal transduction and wave propagation in astrocytic cellular networks

234

Modeling of Austenite Decomposition in Low Si-Mn TRIP Steel During Cooling Original Research Article

235

Modeling of austenite decomposition in plain carbon steels during hot rolling

236

Modeling of autoignition and NO sensitization for the oxidation of IC engine surrogate fuels

237

Modeling of automotive drum brakes for squeal and parameter sensitivity analysis

238

Modeling of automotive fuel cell operation in driving cycles

239

Modeling of avionics blueprint architecture based on GSPN and LP

240

Modeling of axial and shear stresses in multilayer sandwich beams with stiff core layers

241

Modeling of axial bed-to-wall heat transfer in a CFB combustor with abrupt riser exit geometry

242

Modeling of Axial Flux Permanent-Magnet Machines

243

Modeling of axial motion of small droplets deposited on smooth and rough fiber surfaces

244

Modeling of axially and transversely injected precursor droplets into a plasma environment

245

Modeling of axially moving wire with damping: Eigenfunctions, orthogonality and applications in slurry wiresaws

246

Modeling of axis-symmetric steam plasma flow in a non-transferred torch Original Research Article

247

Modeling of backpulse filter cleaning: the small particle filter cake fragments

248

Modeling of backwash cleaning methods for RO membranes Original Research Article

249

Modeling of baking of thin layer of cake using the lumped reaction engineering approach (L-REA) Original Research Article

250

Modeling of Banks Bankruptcy in Iran (Multivariate Statistical Analysis)

251

Modeling of baryte batch grinding in a vibratory disc mill

252

Modeling of batch and semi-batch membrane filtration processes

253

Modeling of Be diffusion in GaAs layers grown by MBE

254

Modeling of Beams on Reinforced Granular Beds

255

Modeling of Benzene Adsorption in the Gas Phase on Single-Walled Carbon Nanotubes for Reducing Air Pollution

256

Modeling of benzocaine analog interactions with the D4S6 segment of NaV4.1 voltage-gated sodium channels Original Research Article

257

Modeling of beryllium sputtering and re-deposition in fusion reactor plasma facing components

258

Modeling of bi-equilibrium states in dielectric elastomer

259

Modeling of bimetallic Pt-based electrocatalyst on extended-surface support for advanced hydrogen compression and separation

260

Modeling of binary droplet collisions for application to inter-impingement sprays

261

Modeling of biodiesel production in algae cultivation with anaerobic digestion (ACAD)

262

Modeling of biodynamic responses distributed at the fingers and the palm of the human hand–arm system

263

Modeling of biological doses and mechanical effects on bone transduction

264

Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands

265

Modeling of biomanipulation in shallow, eutrophic lakes: An application to Lake Bleiswijkse Zoom, the Netherlands

266

Modeling of biomass production by Spirulina platensis as function of phosphate concentrations and pH regimes

267

Modeling of bipolar HVDC links in the harmonic domain

268

Modeling of Bipolar Junction Transistor in FDTD Simulation of Printed Circuit Board

269

Modeling of blade sharpness and compression cut of biomaterials

270

Modeling of blast process using indenting method

271

Modeling of bleaching wave regime of UV laser polymerization of acrylates without initiators

272

Modeling of Blood Flow in a Constricted Porous Vessel Under Magnetic Environment: An Analytical Approach

273

Modeling of body mass index by Newtonʹs second law

274

Modeling of boiling flow in microchannels for nucleation characteristics and performance optimization

275

Modeling of bombardment-induced diffusion and segregation during the self-sputtering of Ga+ ions at SiO2/Si interfaces

276

Modeling of bond between near-surface mounted CFRP laminate strips and concrete

277

Modeling of bonding between steel rebar and concrete at elevated temperatures

278

Modeling of bone conduction of sound in the human head using hp-finite elements: Code design and verification

279

Modeling of bone formation and resorption mediated by parathyroid hormone: response to estrogen/PTH therapy

280

Modeling of boron carbide oxidation in steam

281

Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation

282

Modeling of boron diffusion in polysilicon-on-silicon structures using a rapid thermal anneal step for ultra-shallow junction formation

283

Modeling of bounded stochastic processes

284

Modeling of brake pad-disc interface with emphasis to dynamics and deformation of structures

285

Modeling of branching and gelation in living copolymerization of monomer and divinyl cross-linker using dynamic lattice liquid model (DLL) and Flory–Stockmayer model

286

Modeling of Branching Structures of Plants

287

Modeling of breakthrough curves of single and quaternary mixtures of ethanol, glucose, glycerol and acetic acid adsorption onto a microporous hyper-cross-linked resin

288

Modeling of brine outfall at the planning stage of desalination plants Original Research Article

289

Modeling of bromate formation by ozonation of surface waters in drinking water treatment

290

Modeling of Bubble Column Reactors: Progress and Limitations

291

Modeling of bubble plume design and oxygen transfer for reservoir restoration

292

Modeling of bubble size distribution in isothermal gas–liquid flows: Numerical assessment of population balance approaches

293

Modeling of bubble surface area flux in an industrial rougher column using artificial neural network and statistical techniques

294

Modeling of bubble-layer thickness for formulation of one-dimensional interfacial area transport equation in subcooled boiling two-phase flow

295

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

296

Modeling of C/EBPα Mutant Acute Myeloid Leukemia Reveals a Common Expression Signature of Committed Myeloid Leukemia-Initiating Cells

297

Modeling of cable-moored floating breakwaters connected with hinges

298

Modeling of CaCO3 decomposition under CO2/H2O atmosphere in calcium looping processes

299

Modeling of Cadmium Removal on Lignite (Thar Coal) from Aqueous System

300

Modeling of cadmium salts rejection through a nanofiltration membrane: relationships between solute concentration and transport parameters

301

Modeling of cadmium(II) adsorption on kaolinite-based clays in the absence and presence of humic acid

302

Modeling of cancer virotherapy with recombinant measles viruses

303

Modeling of Capacitance and Sensitivity of a MEMS Pressure Sensor with Clamped Square Diaphragm

304

Modeling of Capacity Reservation and Supplier Selection Based on Option Contract

305

Modeling of capillary flow in shaped polymer fiber bundles

306

MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID

307

MODELING OF CARBON BLACK FILLED NATURAL RUBBER VULCANTZATES BY THE STANDARD TRIBOELASTTC SOLID

308

Modeling of carbon cycling and biogeochemical changes during injection and recovery of reclaimed water at Bolivar, South Australia

309

Modeling of carbon monoxide dispersion around the urban tunnel portals

310

Modeling of carbon nanotube clamping in tensile tests

311

Modeling of carbon sequestration in coal-beds: A variable saturated simulation

312

Modeling of carbon transport in the divertor and SOL of DIII-D during high performance plasma operation

313

Modeling of carbonate oil reservoirs in imbibition displacement with considering asphaltene deposition

314

Modeling of cardiac function of patients with acute myocardial infarction based on Type‑D personality: Mediating role of negative emotions

315

Modeling of Carrier-based Aircraft Ski Jump Take-off Based on Tensor

316

Modeling of cascade and sub-cascade formation at high PKA energies in irradiated fusion structural materials

317

Modeling of cascade damage interactions by Monte-Carlo method

318

Modeling of catalyst deactivation Original Research Article

319

Modeling of Catalyst Effect on the Reduction Rate Enhancement of Barium Sulfate by Methane and Developing Two Environmentally Friendly Processes

320

Modeling of catalyst layer microstructural refinement and catalyst utilization in a PEM fuel cell

321

Modeling of catalytic coke formation in thermal cracking reactors

322

Modeling of catalytic coke formation in thermal cracking reactors

323

Modeling of catalytic gasification kinetics of coal char and carbon

324

Modeling of catalytic monolith reactor for reforming of hexadecane with exhaust gas

325

Modeling of catalytic reactor for oxidative coupling of methane using La2O3/CaO catalyst

326

Modeling of Catecholaminergic Polymorphic Ventricular Tachycardia With Patient-Specific Human-Induced Pluripotent Stem Cells

327

Modeling of cation diffusion in oxygen ion conductors using molecular dynamics

328

Modeling of Cd and Pb speciation in soil solutions by WinHumicV and NICA-Donnan model

329

Modeling of cell sorting and rare cell capture with microfabricated biodevices

330

Modeling of Cell/Dendrite Transition During Directional Solidification of Ti-Al Alloy Using Cellular Automaton Method Original Research Article

331

Modeling of central domestic water heater for buildings

332

Modeling of ceramic particles filled polymer–matrix nanocomposites

333

Modeling of CH4 combustion with NiO/NiAl2O4 in a 10 kWth CLC pilot plant

334

Modeling of Chain Conformations and Spatial Configurations

335

Modeling of chaotic motion of gyrostats in resistant environment on the base of dynamical systems with strange attractors

336

Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure

337

Modeling of characteristics of ionizing radiation detector based on AlGaAs–GaAs heterostructure

338

Modeling of charge neutralization by ionizer

339

Modeling of charge transfer processes to understand photophysical signatures: The case of Rhodamine 110

340

Modeling of chemical mechanical polishing process using FEM ، abductive network

341

Modeling of chemical reactions in afterburning for the reduction of N2O

342

Modeling of chemical reactor dynamics by nonlinear principal components

343

Modeling of chemical vapor infiltration process for fabrication of carbon–carbon composites by finite difference methods Original Research Article

344

Modeling of chloride diffusion in concrete containing low-calcium fly ash

345

Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions

346

Modeling of chloride diffusion in hetero-structured concretes by finite element method

347

Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete

348

Modeling of chloride ion ingress in coastal concrete

349

Modeling of Chloride Ion Separation by Nanofiltration Using Machine Learning Techniques

350

Modeling of chloride transport coupled with enhanced moisture conductivity in concrete exposed to marine environment

351

Modeling of chlorine effect on floc forming and filamentous micro-organisms of activated sludges

352

Modeling of chromatographic separation process with Wiener-MLP representation

353

Modeling of Chromium Combustion in Incineration: Thermochemistry of Cr-C-H-Cl Combustion in Air and Selection of Key Reactions

354

Modeling of clarified tropical fruit juice deacidification by electrodialysis

355

Modeling of Class I Settling Tanks

356

Modeling of Class I Settling Tanks

357

Modeling of Climate Change Effects on Groundwater Resources: The Application of Dynamic Systems Approach

358

Modeling of Clostridium perfringens vegetative cell inactivation in beef-in-sauce products: A meta-analysis using mixed linear models

359

Modeling of cluster structure-dependent drag with Eulerian approach for circulating fluidized beds

360

Modeling of CO and NOx produced by vehicles in Mashhad, 2012

361

Modeling of CO dispersion from the stack of an Iranian cement Plant

362

Modeling of CO2 capture by three typical amine solutions in hollow fiber membrane contactors

363

Modeling of CO2 post-combustion capture using membrane contactors, comparison between one- and two-dimensional approaches

364

Modeling of CO2 release and the carbonate system in multiple-effect distillers Original Research Article

365

Modeling of CO2 solubility and carbamate concentration in DEA, MDEA and their mixtures using the Deshmukh–Mather model

366

Modeling of CO2 sorption on coal

367

Modeling of CO2-selective water gas shift membrane reactor for fuel cell

368

Modeling of coal breakage in a double-roll crusher considering the reagglomeration phenomena

369

Modeling of coal char gasification in coexistence of CO2 and H2O considering sharing of active sites

370

Modeling of coal combustion and NOx formation in a W-shaped boiler furnace

371

Modeling of coal combustion in a 25-MW FBC power plant

372

Modeling of coal gasification in an internally circulating fluidized bed reactor with draught tube

373

Modeling of Coalescence of Dispersed Surface Cracks. Part 1. Probabilistic Model for Crack Coalescence

374

Modeling of coalescence of dispersed surface cracks. Part 2. Simulation model for multiple fracture

375

Modeling of coaxial powder flow for the laser direct deposition process

376

Modeling of Collision Avoidance Protocols in Single-Channel Multihop Wireless Networks

377

Modeling of colloidal fouling in forward osmosis membrane: Effects of reverse draw solution permeation Original Research Article

378

Modeling of color values for nondestructive evaluation of maturity of mango Original Research Article

379

Modeling of combat operations

380

Modeling of combined effects of citral, linalool and β-pinene used against Saccharomyces cerevisiae in citrus-based beverages subjected to a mild heat treatment

381

Modeling of combined electroosmotic and capillary flow in microchannels Original Research Article

382

MODELING OF COMBINED NATURAL/THERMOCAPILLARY CONVECTION FLOWS IN GERMANIUM MELT AT HIGH TEMPERATURES

383

Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine

384

Modeling of combustion and ignition of solid-propellant ingredients

385

Modeling of compaction and overpressuring in sedimentary basins

386

Modeling of complex dynamical behaviours using a state representation technique based on a vector ARMA approach

387

Modeling of complex hydraulic fractures in naturally fractured formation

388

Modeling of complex premixed burner systems by using flamelet-generated manifolds

389

Modeling of complex protein structures

390

Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites

391

Modeling of composite coatings in plasma spraying

392

Modeling of composite fiber production with silica nanoparticles dispersed in polyethyleneoxide

393

Modeling of composite fibrous porous diffusion media

394

Modeling of composite fracture using cohesive zone and bridging models

395

Modeling of composite/concrete interface of RC beams strengthened with composite laminates

396

Modeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates

397

Modeling of compression-induced splitting failure in heterogeneous brittle porous solids

398

Modeling of compressive failure in fiber reinforced composites

399

MODELING OF COMPRESSIVE STRENGTH OF METAKAOLIN BASED GEOPOLYMERS BY THE USE OF ARTIFICIAL NEURAL NETWORK

400

Modeling of Computerized Physician Order Entry with Decision Support System for Diabetic Patients

401

Modeling of concentrated aqueous solutions: Efficient implementation of Pitzer equations in geochemical and reactive transport models

402

Modeling of concentration polarization layer evolution and breakthrough concentrations in dead-end hyperfiltration

403

Modeling of concrete behavior under high strain rates with inertially retarded damage

404

MODELING OF CONCRETE CRACKING INDUCED BY STEEL EXPANSION

405

Modeling of concrete cracking—A hybrid technique of using displacement discontinuity element method and direct boundary element method

406

Modeling of condensation heat transfer for a PRHRS heat exchanger in a SMART-P plant Original Research Article

407

Modeling of condensation heat transfer of pure refrigerants in micro-fin tubes

408

Modeling of condensation heat transfer of refrigerant mixture in micro-fin tubes

409

Modeling of condensation in horizontal tubes Original Research Article

410

Modeling of Condensed Phase Combustion-Decomposition Reaction with Gas Generation

411

Modeling of Conducted Common Mode Perturbations in Variable-Speed Drive Systems

412

Modeling of conductive particle behavior in insulating fluids affected by DC electric fields

413

Modeling of conjugated heat transfer in a thick walled enclosure filled with nanofluid

414

Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows

415

Modeling of Conjunctive Two-Dimensional Surface-Three-Dimensional Subsurface Flows

416

Modeling of consciousness

417

Modeling of constituent redistribution in U–Pu–Zr metallic fuel

418

Modeling of constitutive relationship of Ti–25V–15Cr–0.2Si alloy during hot deformation process by fuzzy-neural network

419

Modeling of constitutive relationships and microstructural variables of Ti–6.62Al–5.14Sn–1.82Zr alloy during high temperature deformation

420

Modeling of Construction Cost of Villas in Oman

421

Modeling of Construction Noise for Environmental Impact Assessment

422

Modeling of contact tracing in social networks

423

Modeling of containment structures on high performance computers Original Research Article

424

Modeling of contaminant transport in soils considering the effects of micro- and macro-heterogeneity

425

Modeling of continuous drive friction welding of mild steel

426

Modeling of continuous dynamic recrystallization in commercial-purity aluminum

427

Modeling of continuous thermal processing of a non-Newtonian liquid food under diffusive laminar flow in a tubular system

428

Modeling of continuous time homogeneous Markov system with fixed size as elastic solid: the two-dimensional case

429

Modeling of continuously, directly analyzed biphasic reaction courses of ribulose 1,5-bisphosphate carboxylase/oxygenase

430

Modeling of controlled particle deposition onto electronically conducting surfaces

431

Modeling of convection heat transfer of supercritical carbon dioxide in a vertical tube at low Reynolds numbers using artificial neural network

432

Modeling of convection-dominated thermoporomechanics problems using incomplete interior penalty Galerkin method

433

Modeling of convective drying kinetic of Erythroxylu mminutifolium Griseb leaves

434

Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics

435

Modeling of cooking-emitted particle dispersion and deposition in a residential flat: A real room application

436

Modeling of copper fixed-bed biosorption from wastewater by Posidonia oceanica

437

Modeling of core flow in a gas–solids riser

438

Modeling of corium dispersion in DCH accidents Original Research Article

439

Modeling of corona under positive lightning surges

440

Modeling of Corroded FRP-Wrapped Reinforced Concrete Columns in Axial Compression

441

Modeling of corrosion fatigue in metals in an aggressive environment

442

Modeling of CorrosionFatigue Crack Growth Rate Based on Least Square Support Vector Machine Technique

443

Modeling of corrosion-induced concrete cover cracking: A critical analysis

444

Modeling of corrugated laminates

445

Modeling of corrugated plate photocatalytic reactors and experimental validation

446

Modeling of cotunneling in quantum dot systems

447

Modeling of Coulomb Collisions in a Kinetic Description of the Electron Cyclotron Resonance Plasma Heating

448

Modeling of Coulomb interaction in parabolic quantum wires

449

Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore

450

Modeling of countercurrent shrinking-bed reactor in dilute-acid total-hydrolysis of lignocellulosic biomass

451

Modeling of coupled edge stochastic and core resonant magnetic field effects in diverted tokamaks

452

Modeling of coupled mass transport and chemical equilibrium in cement-solidified soil contaminated with heavy-metal ions

453

Modeling of coupled momentum, heat and solute transport during DNA hybridization in a microchannel in the presence of electro-osmotic effects and axial pressure gradients

454

Modeling of Coupled Shear Walls and Its Experimental Verification

455

Modeling of coupled spectral radiation, thermal and carrier transport in a silicon photovoltaic cell

456

Modeling of coupled structural systems by an energy spectral element method

457

Modeling of crack growth in ductile solids: a three-dimensional analysis

458

Modeling of crack growth in round bars and plane strain specimens

459

Modeling of crack growth through particulate clusters in brittle matrix by symmetric-Galerkin boundary element method

460

Modeling of Crack Initiation, Propagation and Coalescence in Uniaxial Compression

461

Modeling of crack propagation via an automatic adaptive mesh refinement based on modified superconvergent patch recovery technique

462

Modeling of crack tip high inertia zone in dynamic brittle fracture

463

Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique

464

Modeling of cracked thick metallic structure with bonded composite patch repair using three-layer technique

465

Modeling of cracks in 3D piezoelectric finite media by weakly singular SGBEM

466

Modeling of Creep Behavior for Graphene Filled Vinyl Ester Nano-Composites

467

Modeling of creep behavior of Zircaloy-4 by considering metallurgical effect

468

Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size

469

Modeling of critical lines and regions for binary and ternary mixtures using non-cubic and cubic equations of state

470

Modeling of critical phenomena for liquid/vapor–gas exothermic reaction on a single catalyst pellet

471

Modeling of crop loss caused by Puccinia striiformis f. sp. tritici in three common wheat cultivars in southern Iran

472

Modeling of cross flow ultrafiltration of stevia extract in a rectangular cell Original Research Article

473

Modeling of crossflow membrane separation processes under laminar flow conditions in tubular membrane Original Research Article

474

Modeling of cross-flow osmotic pressure controlled membrane separation processes under turbulent flow conditions

475

Modeling of cross-regulation in converters containing coupled inductors

476

Modeling of crude oil fouling in preheat exchangers of refinery distillation units

477

Modeling of cryogenic frictional behaviour of titanium alloys using Response Surface Methodology approach

478

Modeling of Cryopreservation of Engineered Tissues with One-Dimensional Geometry

479

Modeling of crystal size distributions (CSDs) in sills

480

Modeling of Cs+ diffusion and retention in the DI-A2 experiment (Mont Terri). Uncertainties in sorption and diffusion parameters

481

Modeling of Cu oxidation in an adiabatic fixed-bed reactor with N2 recycling

482

Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects

483

Modeling of curing processes based on a multi-field potential. Single- and multiscale aspects

484

Modeling of current and future energy intensity and greenhouse gas emissions of the Lebanese industrial sector: assessment of mitigation options

485

Modeling of current and future energyintensity and greenhouse gas emissions ofthe Lebanese industrial sector: assessmentof mitigation options

486

Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor

487

Modeling of current–voltage and capacitance–voltage characteristics of pentacene and sol–gel derived SiO2 gate dielectric layer based on thin-film transistor

488

Modeling of cutting forces as function of cutting parameters for face milling of satellite 6 using an artificial neural network

489

Modeling of CW laser diode irradiation of amorphous silicon films

490

Modeling of cyclic mobility in saturated cohesionless soils

491

Modeling of cyclohexene hydrogenation and dehydrogenation reactions in a continuous-flow microreactor

492

Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)

493

Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)

494

Modeling of cylindrically tapered cantilevers for transverse dynamic force microscopy (TDFM)

495

Modeling of daily pan evaporation in sub tropical climates using ANN, LS-SVR, Fuzzy Logic, and ANFIS

496

Modeling of dam break wave propagation in a partially ice-covered channel

497

Modeling of damage accumulation for Duffing-type systems under severe random excitations

498

MODELING OF DAMAGE EFFECT ON HEAT TRANSFER IN TIME-DEPENDENT NONHOMOGENEOUS SOLIDS

499

Modeling of damage evolution in soft-wood perpendicular to grain by means of a discrete element approach

500

Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites

501

Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C

502

Modeling of damage sensing in fiber composites using carbon nanotube networks

503

Modeling of dark characteristics of mercury cadmium telluride n+–p junctions

504

Modeling of dark current in mid-infrared quantum-well infrared photodetectors

505

Modeling of DBT biodegradation behaviors by resting cells of Gordonia sp. WQ-01 and its mutant in oil-water dispersions

506

Modeling of DC conductivity for ethylene vinyl acetate (EVA)/polyaniline conductive composites prepared through insitu polymerization of aniline in EVA matrix

507

Modeling of DC corona discharge along an electrically conductive flat plate with gas flow

508

Modeling of debonding failure for RC beams strengthened in shear with NSM FRP reinforcement

509

Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions

510

Modeling of decadal scale phosphorus retention in lake sediment under varying redox conditions

511

Modeling of decagonal quasicrystal lattice

512

Modeling of decentralized linear observer and tracker for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property

513

Modeling of decision making in membership services as public goods problems

514

Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements

515

Modeling of deep traps in diamond detectors by means of β particles-induced conductivity measurements

516

Modeling of deep-water renewal through cold convective plumes

517

MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL

518

MODELING OF DEFORMATION AND FRACTURE PROCESSES ON THE MESOLEVEL

519

Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression

520

Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate ϕ-model

521

Modeling of deformation behavior of SPD nanostructured CP titanium

522

Modeling of deformation induced anisotropy in free-end torsion

523

Modeling of delamination using a discretized cohesive zone and damage formulation

524

Modeling of dendritic solidification for optimizing casting and microstructure parameters

525

Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed

526

Modeling of density evolution of PLA under ultra-high pressure/temperature histories

527

Modeling of deoxy- and dideoxyaldohexopyranosyl ring puckering with MM3(92) Original Research Article

528

Modeling of Deposit Formation from "Waxy" Mixtures via Moving Boundary Formulation: Radial Heat Transfer under Static and Laminar Flow Conditions

529

Modeling of depuration of paralytic shellfish toxins in Chlamys nobilis and Perna viridis

530

Modeling of design iterations through simulation

531

Modeling of diamond liberation and damage for Debswana kimberlitic ores

532

Modeling of dielectric elastomers: Design of actuators and energy harvesting devices

533

MODELING OF DIELECTRIC MIXTURES CONTAINING CONDUCTING INCLUSIONS WITH STATISTICALLY DISTRIBUTED ASPECT RATIO

534

Modeling of Dielectric Relaxation for Lossy Materials at Microwave Frequencies using Polynomial Approaches

535

Modeling of dielectrophoretic force for moving dielectrophoresis electrodes

536

Modeling of Diffusion and Concurrent Metabolism in Cutaneous Tissue

537

Modeling of diffusion and reaction in monolithic catalysts for the methanol-to-propylene process

538

Modeling of diffusion behavior of humic acid and Nd in the presence of humic acid in compacted bentonite

539

Modeling of Diffusion Coefficients for Binary Gas at P=101.325 kPa using Particle Swarm Optimization Algorithm

540

Modeling of diffusion filtration combustion radiative burner

541

Modeling of diffusion in the presence of damage in polymer matrix composites

542

Modeling of diffusional phase transformation in multi-component systems with stoichiometric phases Original Research Article

543

Modeling of diffusive mass transport in micropores in cement based materials

544

Modeling of diffusivities in supercritical carbon dioxide using a linear solvation energy relationship

545

Modeling of diffusivity of tritium interacting with F centers in Li2O

546

Modeling of dimmable High Power LED illumination distribution using ANFIS on the isolated area

547

Modeling of dioctahedral 2:1 phyllosilicates by means of transferable empirical potentials

548

Modeling of diode configuration glow discharge impedance connected to pulse power supply

549

Modeling of direct beam extraction for a high-charge-state fusion driver

550

Modeling of direct beam extraction for a high-charge-state fusion driver

551

Modeling of Direct Contact Condensation in the Water-Saturated Zone of the Soil Exposed to Steam Injection

552

Modeling of direct contact membrane distillation process: Flux prediction of sodium sulfate and sodium chloride solutions Original Research Article

553

Modeling of directional solidification on an atomic scale

554

Modeling of direction-dependent Processes using Wiener models and neural networks with nonlinear output error structure

555

Modeling of discharge Coefficient of nonlinear weirs with QNET and SVM methods

556

Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method

557

Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging

558

Modeling of dislocation patterns of small- and high-angle grain boundaries in aluminum

559

Modeling of dislocation–grain boundary interactions in FCC metals

560

Modeling of disorder and X-ray diffraction in coal-based graphitic carbons Original Research Article

561

Modeling of dispersed-drug release from two-dimensional matrix tablets

562

Modeling of dispersion in a polymeric chromatographic monolith

563

Modeling of dispersion near roadways based on the vehicle-induced turbulence concept

564

Modeling of dissociation–recombination in nozzles using strongly non-equilibrium vibrational distributions Original Research Article

565

Modeling of dissolution-diffusion controlled drug release from planar polymeric systems with finite dissolution rate and arbitrary drug loading

566

Modeling of dissolved oxygen levels in the bottom waters of the Lower St. Lawrence Estuary: Coupling of benthic and pelagic processes

567

Modeling of distortion compensation ineffectivity in filters for nonactive power

568

Modeling of DNA fragmentation induced in human fibroblasts by 56Fe ions Original Research Article

569

Modeling of domain switching in ferroelectric ceramics: An example

570

Modeling of double action extrusion—A novel extrusion process for friction characterization at the billet–die bearing interface

571

Modeling of double-diffusive turbulent natural convection in porous media

572

Modeling of Dowel Jointed Rigid Airfield Pavement under Thermal Gradients and Dynamic Loads

573

Modeling of DR CALUX® bioassay response to screen PCDDs, PCDFs, and dioxin-like PCBs in farm milk from dairy herds

574

Modeling of drilling assisted by cryogenic cooling for higher efficiency

575

Modeling of droplet collision-induced breakup process

576

Modeling of droplet entrainment in co-current annular two-phase flow: A new approach

577

Modeling of droplet entrainment phenomena at a quench front

578

Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy

579

Modeling of droplet-gas interactions in spray atomization of Ta-2.5W alloy

580

Modeling of drug delivery from erodible and non-erodible laminated planar devices into a finite external medium

581

Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)

582

Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)

583

Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC)

584

Modeling of drug release from microemulsions: a peculiar case

585

Modeling of Drying Behaviors of Mushroom in a Solar Assisted Heat Pump Dryer by Using Artificial Neural Network

586

Modeling of Ductile Crack Growth in Reactor Pressure-Vessel Steels and Determination of JR Curves

587

Modeling of ductile crack propagation in expanded thin-walled 6063-T5 aluminum tubes

588

Modeling of ductile fracture using the dynamic punch test

589

Modeling of ductile fracture using the dynamic punch test

590

Modeling of ductile fracture using the dynamic punch test

591

Modeling of ductile fracture: Application of the mechanism-based concepts

592

Modeling of ductile fracture: Significance of void coalescence

593

Modeling of Dynamic Behavior and Estimation of Damage Incurred by Self-Centering Rocking Walls

594

Modeling of dynamic cutting forces and cutting characteristics based on the analyzed results of average forcefeed rate relationship in milling process

595

Modeling of dynamic microstructure evolution of EN AW-6082 alloy during hot forward extrusion

596

Modeling of dynamic operating behaviors in a liquid-feed direct methanol fuel cell

597

Modeling of dynamic response of SOL-divertor plasmas to an ELM crash

598

Modeling of dynamic systems : By Lennart Ljung and Torkel Glad. Prentice-Hall, Englewood Cliffs, NJ (1994). ISBN 0-13-597097-0

599

Modeling of dynamical processes in laser ablation

600

Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 1. Isothermal flows

601

Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion

602

Modeling of early age behavior of blast furnace slag concrete based on micro-physical properties

603

Modeling of Early-Age Creep of Shotcrete. I: Model and Model Parameters

604

Modeling of Early-Age Creep of Shotcrete. II: Application to Tunneling

605

Modeling of eating pathology and social reinforcement of the thin-ideal predict onset of bulimic symptoms

606

Modeling of eddy characteristic time in LES for calculating turbulent diffusion flame

607

Modeling of eddy current effects in an opposite-field septum

608

Modeling of eddy current effects in an opposite-field septum

609

Modeling of eddy current probe response for steam generator tubes

610

Modeling of eddy current probe response for steam generator tubes

611

Modeling of eddy current probe response for steam generator tubes Original Research Article

612

Modeling of effect of polarization on UV sky radiance during twilight Original Research Article

613

Modeling of effective elastic properties for polymer based carbon nanotube composites

614

Modeling of effective material properties of pyrolytic carbon with different texture degrees by homogenization method

615

Modeling of effective thermal conductivity and viscosity of carbon structured nanofluid

616

Modeling of efficient charge transfer materials of 4,6-di(thiophen-2-yl)pyrimidine derivatives: Quantum chemical investigations

617

Modeling of elastic and inelastic electron backscattering from surfaces

618

Modeling of elastic modulus and hardness determination by indentation of porous yttria stabilized zirconia coatings

619

Modeling of elastic modulus evolution of cirrhotic human liver

620

Modeling of elastic thermal stresses in two materials joined by a graded layer

621

Modeling of Elastoplastic Crack Propagation Using Finite Element Method with Adaptive Mesh

622

Modeling of elastoplastic damage behavior of a claystone

623

Modeling of electrical and optical characteristics of near room-temperature CdS/ZnSe based NIR photodetectors

624

Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II

625

Modeling of electrical properties of grain boundaries in n-conducting barium titanate ceramics as a function of temperature and dc-bias

626

Modeling of electric-field driven transport processes in microdevices for immunoassay

627

Modeling of electricity consumption in the Asian gaming and tourism center—Macao SAR, Peopleʹs Republic of China

628

Modeling of electrochemical intercalation of lithium into a LiMn2O4 electrode using Green function

629

Modeling of electrocrystallization for pulse current electroforming of nickel

630

Modeling of electrodialytic and dialytic removal of Cr, Cu and As from CCA-treated wood chips Original Research Article

631

Modeling of electrokinetic transport in silica nanofluidic channels Original Research Article

632

Modeling of electromagnetic absorption/scattering problems on curvilinear geometries using hp finite/infinite element method

633

Modeling of electromagnetic absorption/scattering problems using hp-adaptive finite elements Original Research Article

634

Modeling of electromagnetic fields in rectangular waveguides by coupled finite–infinite elements Original Research Article

635

Modeling of electromagnetic interference induced by electrostatic discharge (ESD) inside resonant structures

636

Modeling of electromagnetic separation of inclusions from molten metals

637

Modeling of electromagnetic separation of inclusions from molten metals

638

Modeling of electromagnetically coupled substrate noise in FLASH A/D converters

639

Modeling of electron cyclotron current drive in a tokamak with internal transport barrier

640

Modeling of Electron Heating and the Spatiotemporal Evolution of Emission in a Current-Sheet Plasma

641

Modeling of electron injection and transport in conjugated polymers

642

Modeling of electron mobility degradation by remote Coulomb scattering in ultrathin oxide MOSFETs

643

Modeling of electron temperature and DC bias voltage in an inductively-coupled Cl2/Ar plasma using neural network

644

Modeling of Electron Transfer through DNA Molecules

645

Modeling of electron-vibrational 4fn–4fn − 15d spectra in LiYF4:RE3+ crystals

646

Modeling of electroosmotic and electrophoretic mobilization in capillary and microchip isoelectric focusing

647

Modeling of Electrostatic Fields for Non-harmattan season in Northern Nigeria

648

Modeling of electrostatic recognition processes in the mammalian mitochondrial steroid hydroxylase system Original Research Article

649

Modeling of ELM events and their effect on impurity enrichment

650

Modeling of EMI response of damaged Mindlin–Herrmann rod

651

Modeling of EMI response of damaged Mindlin–Herrmann rod

652

Modeling of encapsulated cell systems

653

Modeling of end-use energy consumption in the residential sector: A review of modeling techniques

654

Modeling of energy absorption of short fiber composite considering interfacial properties of fiber/matrix

655

Modeling of energy bands in ultra-thin layer quantum nanostructures for solar cell applications

656

MODELING OF ENERGY CONSUMPTION OF CUCUMBER GREENHOUSES USING ARTIFICIAL NEURAL NETWORK AND ANFIS

657

Modeling of energy distribution inside greenhouse using concept of solar fraction with and without reflecting surface on north wall

658

Modeling of energy distributions for plasma implantation

659

Modeling of energy loss to the environment from a grinding mill. Part I: Motivation, literature survey and pilot plant measurements

660

Modeling of energy loss to the environment from a grinding mill. Part II: Modeling the overall heat transfer coefficient

661

Modeling of Energy Output in Poultry for Egg Production Farms using Artificial Neural Networks

662

Modeling of Energy Spilling in Substrate-Sufficient Cultures

663

Modeling of energy-services supply systems

664

Modeling of enhanced electrocaloric effect above the Curie temperature in relaxor ferroelectrics Original Research Article

665

Modeling of enhanced penetrant diffusion in nanoparticle-polymer composite membranes

666

Modeling of environmental aspects related to reverse osmosis desalination supply chain

667

Modeling of Environmental Factors Affecting the Prevalence of Zoonotic and Anthroponotic Cutaneous, and Zoonotic Visceral Leishmaniasis in Foci of Iran: A Remote Sensing and GIS Based Study

668

Modeling of environmental four-way data from air quality control

669

Modeling of Environmental Impact Assessment Based on RIAM and TOPSIS for Desalination and Operating Units

670

Modeling of Environmental Influences at the Signal Transmission by means of VDSL and PLC Technologies

671

Modeling of environmentally significant interfaces: Two case studies

672

Modeling of enzymatic conversion in the catalytic gel layer located on a membrane surface Original Research Article

673

Modeling of episodic particulate matter events using a 3-D air quality model with fine grid: Applications to a pair of cities in the US/Mexico border

674

Modeling of Epistemic Uncertainty in Reliability Analysis of Structures Using a Robust\\ Genetic Algorithm

675

Modeling of equiaxed growth in multicomponent alloys accounting for convection and for the globular/dendritic morphological transition

676

Modeling of equilibration times at high pressure for multicomponent vapor–liquid diffusional processes

677

Modeling of erosion and deposition patterns on C–W and W–Ta twin limiters exposed to the TEXTOR edge plasmas

678

Modeling of erosion combustion of energetic materials in high-enthalpy flows

679

Modeling of Erosion Wear of Sand Water Slurry Flow through Pipe Bend using CFD

680

Modeling of Escherichia coli growth and acetate formation under different operational conditions

681

Modeling of ESD-induced confined ignition of solid rocket propellants

682

Modeling of esterification in a batch reactor coupled with pervaporation for production of ethyl acetate catalyzed by ion exchange resins

683

Modeling of esterification of acetic acid with n-butanol in the presence of Zr(SO4)2·4H2O coupled pervaporation

684

Modeling of Ethylbenzene Dehydrogenation Membrane Reactor to Investigate the Potential Application of a Microporous Hydroxy Sodalite Membrane

685

Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy

686

Modeling of Evanescent Energy in Optical Fibers

687

MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM

688

MODELING OF EVAPORATION REDUCTION IN DRIP IRRIGATION SYSTEM

689

Modeling of evoked potentials of electroencephalograms: An overview

690

Modeling of evolving damage in high temperature polymer matrix composites subjected to thermal oxidation

691

Modeling of excess properties and vapor–liquid equilibrium of the system H3PO4–H2O

692

Modeling of excess vacancy annihilation at different types of sinks Original Research Article

693

Modeling of existing cooling towers in ASPEN PLUS using an equilibrium stage method

694

Modeling of extinction in turbulent diffusion flames by the velocity-dissipation-composition PDF method

695

Modeling of extraction of dyes and their mixtures from aqueous solution using emulsion liquid membrane

696

Modeling of extraction of β-carotene from apricot bagasse using supercritical CO2 in packed bed extractor

697

Modeling of extremely low frequency magnetic field sources using multipole techniques

698

Modeling of extrinsic extended defect evolution in ion-implanted silicon upon thermal annealing

699

MODELING OF EXTRUSION PROCESS USING RESPONSE SURFACE METHODOLOGY AND ARTIFICIAL NEURAL NETWORKS

700

Modeling of facesheet crack growth in titanium–graphite hybrid laminates, Part I

701

Modeling of facesheet crack growth in titanium–graphite hybrid laminates. Part II: Experimental results

702

Modeling of facilitated transport of Cr(III) using (RNH3+HSO4−) ionic liquid and pseudo-emulsion hollow fiber strip dispersion (PEHFSD) technology

703

Modeling of failure in a high temperature black liquor gasifier refractory lining

704

Modeling of failure in composites by X-FEM and level sets within a multiscale framework Original Research Article

705

Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets

706

Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis

707

Modeling of farnesyltransferase inhibition by some thiol and non-thiol peptidomimetic inhibitors using genetic neural networks and RDF approaches Original Research Article

708

Modeling of fast diffusion along grain boundaries in oxide ceramics

709

Modeling of fast phase transitions dynamics in metal target irradiated by pico- and femtosecond pulsed laser

710

Modeling of fatigue contact damages formation in rolling bodies and assessment of their lifetime

711

Modeling of fatigue crack growth from a notch

712

Modeling of fatigue crack growth in a pressure vessel steel Q345R

713

Modeling of fatigue crack growth in notched fiber metal laminates

714

Modeling of fatigue crack growth rate for ferritic steels in light water reactor environments Original Research Article

715

Modeling of fatigue crack growth threshold development for a microstructurally small crack

716

Modeling of fatigue crack propagation using dual boundary element method and Gaussian Monte Carlo method

717

Modeling of fatigue damage evolution on the basis of the kinetic concept of strength

718

Modeling of fatigue damage in a polymer matrix composite

719

Modeling of fatigue damage in a polymer matrix composite

720

Modeling of fatigue damage under superimposed high-cycle and low-cycle fatigue loading for a cast aluminum alloy

721

Modeling of fatigue wear of a two-layered elastic half-space in contact with periodic system of indenters

722

Modeling of fatigue-type seismic damage for nuclear power plants

723

Modeling of fault gouges with Cosserat Continuum Mechanics: Influence of thermal pressurization and chemical decomposition as coseismic weakening mechanisms

724

Modeling of fault reactivation and induced seismicity during hydraulic fracturing of shale-gas reservoirs

725

Modeling of Fe growth on Mo(1 1 0)

726

Modeling of female human body shapes for apparel design based on cross mean sets

727

Modeling of femtosecond ablation of aluminum film with single laser pulses

728

Modeling of femtosecond laser damage threshold on the two-layer metal films

729

Modeling of femtosecond laser-induced non-equilibrium deformation in metal films

730

Modeling of fermentative hydrogen production from sweet sorghum extract based on modified ADM1

731

Modeling of fermentative hydrogen production from the bacterium Ruminococcus albus: Definition of metabolism and kinetics during growth on glucose

732

Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure

733

Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure Original Research Article

734

Modeling of ferrite structure after deformation in the two-phase region

735

Modeling of ferroelectric domains in thin films and superlattices

736

Modeling of fiber pull-out in continuous fiber reinforced ceramic composites using finite element method and artificial neural networks

737

Modeling of filtration combustion in a packed bed

738

Modeling of filtration efficiency of nanoparticles in standard filter media

739

Modeling of financial data: Comparison of the truncated Lévy flight and the ARCH(1) and GARCH(1,1) processes

740

Modeling of financial incentives for investments in energy storage systems that promote the large-scale integration of wind energy

741

Modeling of financial supply chain

742

Modeling of fire spread through a forest fuel bed using a multiphase formulation

743

Modeling of fire-tube boilers

744

Modeling of fishbone-type carbon nanofibers with cone-helix structures Original Research Article

745

Modeling of fishbone-type carbon nanofibers: A theoretical study Original Research Article

746

Modeling of fixed bed column studies for removal of boron from geothermal water by selective chelating ion exchange resins Original Research Article

747

Modeling of fixed bed methanation reactor for syngas production: Operating window and performance characteristics

748

Modeling of Flap Endonuclease Interactions with DNA Substrate

749

Modeling of flash evaporation I: Formulation of the mathematical model

750

Modeling of flexural behavior of RC beams strengthened with mechanically fastened FRP strips

751

Modeling of flexure-hinge type lever mechanisms

752

Modeling of Flight of the Line Thrower Projectile

753

Modeling of flow and contaminant transport in coupled stream–aquifer systems

754

Modeling of flow and transport at the microscale Original Research Article

755

Modeling of flow behavior of Ti–6Al–4V alloy at elevated temperatures

756

Modeling of Flow Blockage in a Liquid Metal-Cooled Reactor Subassembly with a Subchannel Analysis Code

757

Modeling of flow dynamics in laminar aerosol flow tubes

758

Modeling of flow field and separation efficiency of a deoiling hydrocyclone using large eddy simulation

759

Modeling of flow field in polymer electrolyte membrane fuel cell

760

Modeling of flow in a polymeric chromatographic monolith

761

MODELING OF FLOW NUMBER OF ASPHALT MIXTURES USING A MULTI–KERNEL BASED SUPPORT VECTOR MACHINE APPROACH

762

Modeling of flow stress for magnesium alloy during hot deformation

763

Modeling of flow stress of 42CrMo steel under hot compression

764

Modeling of flow stress of bainitic and martensitic functionally graded steels under hot compression

765

Modeling of flowing film concentrators: Part 1. Water split behaviour

766

Modeling of flue gas desulphurization using dry additives

767

Modeling of fluid filtration and near-wellbore damage along a horizontal well

768

Modeling of fluid flow and heat transfer in a trough solar collector

769

Modeling of fluid multiphase equilibria in ternary systems of carbon dioxide as the near-critical solvent and two low-volatile solutes

770

Modeling of fluid phase equilibria with two thermodynamic theories: Non-random hydrogen bonding (NRHB) and statistical associating fluid theory (SAFT)

771

Modeling of fluidized bed membrane reactors for hydrogen production from steam methane reforming with Aspen Plus

772

Modeling of fluidized bed reactor for ethylene polymerization: effect of parameters on the single-pass ethylene conversion

773

Modeling of fluidized bed reactor of ethylene polymerization

774

Modeling of fluorinated tetraphenylporphyrin nanoparticles size design via rapid expansion of supercritical solution

775

Modeling of flux decline in crossflow microfiltration using neural networks: the case of phosphate removal

776

Modeling of food intake is moderated by salient psychological group membership

777

Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics

778

Modeling of formation of binary-phase hollow nanospheres from metallic solid nanospheres Original Research Article

779

Modeling of forming efficiency using genetic programming

780

Modeling of forward pump EDFA under pump power through MATLAB

781

Modeling of fouling phenomena in cross-flow ultrafiltration of suspensions containing suspended solids and oil droplets Original Research Article

782

Modeling of fouling reduction by secondary membranes

783

Modeling of frac flowback and produced water volume from Wattenberg oil and gas field

784

Modeling of fractional-order signals from their ramp cepstra

785

Modeling of frequency-dependent impedance of the third rail used in traction power systems

786

Modeling of fresh concrete flow

787

Modeling of fresh egg pasta characteristics for egg content and albumen to yolk ratio Original Research Article

788

Modeling of fretting wear evolution in rough circular contacts in partial slip

789

Modeling of fretting wear evolution in rough circular contacts in partial slip

790

Modeling of friction using spectral analysis

791

Modeling of frost growth and frost properties with airflow over a flat plate

792

MODELING OF FROST GROWTH ON A HORIZONTAL CIRCULAR CYLINDER UNDER NATURAL CONVECTION USING FRACTAL GEOMETRY ANALYSIS

793

Modeling of frost salt scaling

794

Modeling of frosting behavior on a cold plate

795

Modeling of FS2+ center at the magnesium oxide (1 0 0) hydrated surface

796

Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions

797

Modeling of fuel performance and metallic fission product release behavior during HTTR normal operating conditions Original Research Article

798

Modeling of fully-developed, liquid metal, thin film flows for fusion divertor applications

799

Modeling of functionally graded materials in dynamic analyses

800

Modeling of fuzzy control mechanism of Intersection by using Colored Petri Net in the VANET In order to reduce urban traffic congestion

801

Modeling of gamma-ray energy absorption buildup factors using neural network

802

Modeling of Gapped Power Bus Structures for Isolation Using Cavity Modes and Segmentation

803

Modeling of gas condensates properties using continuous distribution functions for the characterisation of the heavy fraction

804

Modeling of gas discharge plasmas: What can we learn from it?

805

Modeling of gas dynamics in a pulse combustion chamber to predict initial drying process parameters

806

Modeling of gas flow inside and outside the nozzle used in spray deposition

807

Modeling of Gas Hydrate Formation in the Presence of Inhibitors by Intelligent Systems

808

Modeling of gas solubilities in polymers with cubic equation of state

809

Modeling of Gas Solubility Data for HFCs–Lubricant Oil Binary Systems by Means of the SRK Equation of State

810

Modeling of gas solubility in brine

811

Modeling of gas transport in a microporous solid using a slice selection procedure: Application to the diffusion of benzene in ZSM5

812

Modeling of gas transport through a tubular solid oxide fuel cell and the porous anode layer

813

Modeling of gaseous adsorption of activated carbon bed by Wheeler–Jonas equation and estimation of breakthrough time using the extended equation

814

Modeling of gaseous radiant exchange with the smooth (reordered) band model

815

Modeling of gasification and fragmentation behavior of char particles having complicated structures

816

Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part I. Physical Modeling

817

Modeling of Gas-Liquid Reactions in Ladle Metallurgy: Part II. Numerical Simulation

818

Modeling of gas–liquid reactions in porous membrane microreactors

819

Modeling of Gauss elimination technique for multi-objective linear programming problem

820

Modeling of gene expression pattern alteration by p,p′-DDE and dieldrin in largemouth bass

821

Modeling of Generation and Growth of Non-Spherical Nanoparticles in a Co-Flow Flame

822

Modeling of generators and their controls in power system simulations using singular perturbations

823

Modeling of geochemical processes related to uranium mobilization in the groundwater of a uranium mine

824

Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools

825

Modeling of geometry effects in fretting fatigue

826

Modeling of geothermal energy production from stratigraphic reservoirs in the Great Basin

827

Modeling of germanium atomic-layer-epitaxy

828

Modeling of germination and growth of ochratoxigenic isolates of Aspergillus ochraceus as affected by water activity and temperature on a barley-based medium Original Research Article

829

Modeling of glancing incidence X-ray for depth profiling of thin layers

830

Modeling of glass sintering applied for the fabrication of porous glass bodies

831

Modeling of global biomass policies

832

Modeling of global particle balance in steady-state magnetic fusion devices – Analysis of the recent data from the TRIAM-1M tokamak

833

Modeling of global variations and ring shadowing in Saturnʹs ionosphere

834

Modeling of glucose isomerization in a fluidized bed immobilized enzyme bioreactor

835

Modeling of grabens extending above evaporites in Canyonlands National Park, Utah

836

Modeling of grain boundary barrier modulation in ZnO invisible thin film transistors

837

Modeling of grain boundary character reconstruction and predicting intergranular fracture susceptibility of textured and random polycrystalline materials

838

Modeling of grain growth in two dimensions Original Research Article

839

Modeling of grain growth mechanism by nickel silicide reactive grain boundary effect in metal-induced-lateralcrystallization

840

Modeling of grain pull-out forces in polycrystalline alumina

841

Modeling of grain pull-out forces in polycrystalline alumina

842

Modeling of grain refinement by cellular automata

843

Modeling of grain refinement in aluminum and copper subjected to cutting

844

Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper

845

Modeling of graphene-based NEMS

846

Modeling of graphite oxidation in a stagnation-point flow field using detailed homogeneous and semiglobal heterogeneous mechanisms with comparisons to experiments

847

Modeling of graphitization kinetics during peritectic melting of tungsten carbide Original Research Article

848

Modeling of Greenhouse Gas Emissions in Dairy Farms

849

Modeling of greenhouse with PCM energy storage

850

Modeling of gross and net carbon dioxide exchange over a cool-temperate deciduous broad-leaved forest in Japan: Analysis of seasonal and interannual change

851

Modeling of ground grid and metallic structure currents in high voltage a.c. substations for the computation of electromagnetic fields

852

Modeling of Groundnut Shell Mercerization Process Using a Neuro-Fuzzy Technique

853

Modeling of Groundwater Artificial Recharge by Reactivating an Old Stream Bed

854

Modeling of Groundwater Flow over Sloping Beds in Response to Constant Recharge and Stream of Varying Water Level

855

Modeling of groundwater heads based on second-order difference time series models

856

Modeling of Groundwater Recharge by Rainwater Harvesting-Wadi Bayer (Case Study)

857

Modeling of Groundwater Resources Heavy Metals Concentration Using Soft Computing Methods: Application of Different Types of Artificial Neural Networks

858

Modeling of groundwater salinity on the Persian Gulf coastal plain By using linear moments and ANFIS-PSO

859

Modeling of growth and bacteriocin production by Leuconostoc mesenteroides E131

860

Modeling of Growth and Welfare Effects of Tax Reform in Iran: A Static Computable General Equilibrium Analysis

861

Modeling of Growth, Lactate Consumption, and Volatile Fatty Acid Production by Megasphaera elsdenii Cultivated in Minimal and Complex Media

862

Modeling of H2O adsorption-induced curvature of a metal/silicon nanocantilever

863

Modeling of Hammerstein-Wiener Processes with Special Input Test Signals

864

Modeling of hard part machining: effect of insert edge preparation in CBN cutting tools

865

Modeling of harmonic contributions to non-symmetrical RF plasmas

866

Modeling of Heart Excitation Patterns caused by a Local Inhomogeneity

867

Modeling of heat and mass transfer in accelerator targets during postulated accidents

868

Modeling of heat and mass transfer in accelerator targets during postulated accidents Original Research Article

869

Modeling of heat and mass transfer in parallel plate liquid-desiccant dehumidifiers

870

Modeling of heat and moisture transport by periodic ventilation of thin cotton fibrous media

871

Modeling of heat capacities of multi-walled carbon nanotubes by molecular structural mechanics

872

Modeling of Heat Conduction in Thermoplastic Honeycomb Core/Face Sheet Fusion Bonding

873

Modeling of heat deposition on the W/Cu movable limiter in HT-7

874

Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions

875

Modeling of Heat Losses Within Combustion Chamber of Diesel Engines

876

Modeling of heat transfer and differential diffusion in transported PDF methods

877

Modeling of heat transfer and energy analysis of potato slices and cylinders during solar drying

878

Modeling of heat transfer and evaporative mass losses during the cooking of beef patties using far-infrared radiation Original Research Article

879

Modeling of heat transfer and fluid flow characteristics of helicoidal double-pipe heat exchangers using Adaptive Neuro-Fuzzy Inference System (ANFIS)

880

Modeling of heat transfer and solidification in LIVE L3A experiment

881

Modeling of Heat Transfer and Solidification of Composite Roll

882

Modeling of Heat Transfer and Solidification Process of Spray Formed Billet

883

Modeling of heat transfer and turbulent flows inside industrial furnaces

884

Modeling of heat transfer coefficient in the furnace of CFB boilers by artificial neural network approach

885

Modeling of heat transfer during controlled cooling in hot rod rolling of carbon steels

886

Modeling of heat transfer enhancement by wire coil inserts using artificial neural network analysis

887

Modeling of heat transfer for flow across tube banks

888

Modeling of heat transfer in a turbulent flow around a heat-conducting plate with local regions of heating

889

Modeling of heat transfer in tanks during wine-making fermentation

890

Modeling of heat transfer in thermoplastic composite tape lay-up manufacturing

891

Modeling of heat transfer in turbulent gas–solid flow

892

Modeling of heat treatment processes for composite materials

893

Modeling of heating and cooling performance of counter flow type vortex tube by using artificial neural network

894

Modeling of heavy metal ion binding by phosphoric acid activated carbon

895

Modeling of heavy metal migration in sand/bentonite and the leachate pH effect

896

Modeling of He–defect interactions in ferritic alloys for fusion

897

Modeling of helical gear contact with tooth deflection

898

Modeling of helicopter-borne tunable TEA CO2 DIAL system employment for detection of methane and ammonia leakages

899

Modeling of helium bubble nucleation and growth in neutron irradiated boron doped RAFM steels

900

Modeling of heterogeneous chemical reactions caused in pyrolysis of biomass particles

901

Modeling of heterogeneous surfaces and characterization of porous materials by extending density functional theory for the case of amorphous solids

902

Modeling of heterojunction bipolar transistors at any temperature, pressure, strain and alloy composition

903

Modeling of hierarchical fuzzy systems

904

Modeling of high energy ion implantation based on splitting of the Boltzmann transport equation

905

Modeling of high power automotive batteries by the use of an automated test system

906

Modeling of high power laser interaction with APS deposited FeCrTiC

907

Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations

908

Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting

909

Modeling of High Temperature GaN Quantum Dot Infrared Photodetectors

910

Modeling of high temperature proton exchange membrane fuel cells with novel sulfonated polybenzimidazole membranes

911

Modeling of high temperature rheological behavior of AZ61 Mg-alloy using inverse method and ANN

912

Modeling of high velocity impact of spherical particles

913

Modeling of high-concentration gas-particle flow in a horizontal channel

914

Modeling of high-conversion binary copolymerization

915

Modeling of high-density compaction of granular materials by the Discrete Element Method

916

Modeling of higher order systems using artificial bee colony algorithm

917

Modeling of highly multimode waveguides for time-domain simulation

918

Modeling of high-pressure CO dissociation on Pt(1 0 0) and Pt(1 1 1)

919

Modeling of high-pressure vapor–liquid equilibrium in ionic liquids + gas systems using the PRSV equation of state

920

Modeling of high-temperature treatment of wood using the reaction engineering approach (REA)

921

Modeling of high-tension roll separator for separation of titanium bearing minerals

922

Modeling of highway stormwater runoff

923

Modeling of HMX/GAP pseudo-propellant combustion

924

Modeling of homogeneous mercury speciation using detailed chemical kinetics

925

Modeling of horizontal geoexchange systems for building heating and permafrost stabilization

926

Modeling of horizontal tube-bundle absorbers of absorption cooling systems

927

Modeling of Hot Deformation Behavior of 55SiMnMo Medium-Carbon Steel Original Research Article

928

Modeling of hot tearing formation during solidification

929

Modeling of hot-wall condensers for domestic refrigerators

930

Modeling of HPA and HPA linearization through a predistorter: Global Broadcasting Service applications

931

Modeling of HT and HTO release from irradiated lithium metazirconate

932

Modeling of human ghrelin receptor (hGHS-R1a) in its close state and validation by molecular docking Original Research Article

933

Modeling of Human Immunodeficiency Virus Modes of Transmission in Iran

934

Modeling of hurricane damage for Hawaii residential construction

935

Modeling of HXeBr in CO2 and Xe environments: Structure, energetics and vibrational spectra

936

Modeling of hybrid photovoltaic/wind/fuel cells power system

937

MODELING OF HYBRID RENEWABLE ENERGY SYSTEM: THE CASE STUDY OF ISTANBUL, TURKEY

938

Modeling of hybrid renewable energy systems

939

Modeling of hydrate formation conditions for CH4, C2H6, C3H8, N2, CO2 and their mixtures using the PRSV2 equation of state and obtaining the Kihara potential parameters for these components

940

Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure

941

Modeling of hydration reactions using neural networks to predict the average properties of cement paste

942

Modeling of hydrocarbon species in ECR methane plasmas

943

Modeling of hydrocarbons pyrolysis at low temperature. Automatic generation of free radicals mechanisms

944

Modeling of Hydrodynamic Chromatography for Colloid Migration in Fractured Rock

945

Modeling of hydrodynamic dispersion and two-phase flow in the complex variable boundary element method Original Research Article

946

Modeling of Hydrodynamic Factors for Management of Coastal Hazards, Case Study: Khamir Port, Persian Gulf, Iran

947

Modeling of hydrodynamics in microchannel reactor for Fischer–Tropsch synthesis

948

Modeling of hydroecological feedbacks predicts distinct classes of landscape pattern, process, and restoration potential in shallow aquatic ecosystems

949

Modeling of hydrogen embrittlement in single crystal Ni

950

Modeling of hydrogen explosion on a pressure swing adsorption facility

951

Modeling of hydrogen permeation for Ni–BZCY asymmetric membrane

952

Modeling of hydrogen permeation for Ni–ceramic proton conductor composite membrane with symmetric structure

953

Modeling of hydrogen production process from biomass using oxygen blown gasification

954

Modeling of hydrogen production with a stand-alone renewable hybrid power system

955

Modeling of hydrogen storage materials by density-functional calculations

956

Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy

957

Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy

958

Modeling of hydrogen upd isotherms

959

Modeling of hydrogen vacancy for dissociative adsorption of H2 on Pd (1 1 1) surface by a quantum chemical molecular dynamics

960

Modeling of hydrogen-assisted ductile crack propagation in metals and alloys

961

Modeling of hydrogen-rich gas production by plasma reforming of hydrocarbon fuels

962

Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower

963

Modeling of Hygrothermal Damage of Composite Materials

964

Modeling of hysteresis and power losses in transformer laminations

965

Modeling of ice crystal growth in laminar falling films for the production of pumpable ice slurries

966

Modeling of ice formation and condensation on a cryogenic surface

967

Modeling of ice formation in porous solids with regard to the description of frost damage

968

Modeling of Icing and Ice Shedding on Overhead Power Lines Based on Statistical Analysis of Meteorological Data

969

Modeling of icing events based on passive ice meter observations in Quebec

970

Modeling of Immobilized Cell Columns for Bioconversion and Wastewater Treatment

971

Modeling of immunoglobulin uptake by N,N,N′,N′-ethylenediaminetetramethylenephosphonic acid-modified zirconia particles under static and dynamic conditions

972

Modeling of Impact Damage of Sewing Machine Needle on Woven Fabric by Finite Element Method

973

Modeling of impact problems using an h-adaptive, explicit Lagrangian finite element method in three dimensions Original Research Article

974

Modeling of impact toughness of cold formed material by genetic programming

975

Modeling of impacts on composite structures

976

Modeling of Inclusion Growth and Dissolution in the Weld Pool

977

Modeling of Inclusion Removal in a Tundish

978

Modeling of Inclusion Removal in a Tundish

979

Modeling of inclusions with interphases in heterogeneous material using the infinite element method

980

Modeling of incompressible flow in short pipes with leaks

981

Modeling of Incubation Time for Austenite to Ferrite Phase Transformation Original Research Article

982

Modeling of in-cylinder pressure oscillations under knocking conditions: A general approach based on the damped wave equation

983

Modeling of Individual and Organizational Factors Affecting Traumatic Occupational Injuries Based on the Structural Equation Modeling: A Case Study in Large Construction Industries

984

Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran

985

Modeling of induction machines including stator and rotor slot effects

986

Modeling of industrial crystallizers for control and design purposes

987

Modeling of industrial energy consumption: An introduction and context

988

Modeling of industrial reactor for hydrotreating of vacuum gas oils Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions

989

Modeling of industrial reactor for hydrotreating of vacuum gas oils: Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions

990

Modeling of inelastic behavior of curved members with a mixed formulation beam element

991

Modeling of inelastic impacts with the help of smooth-functions

992

Modeling of inertial particle transport and deposition in human nasal cavities with wall roughness

993

Modeling of Inflow Well Performance of Multilateral Wells: Employing the Concept of Well Interference and the Joshiʹʹs Expression

994

Modeling of influence of heterogeneity on mechanical performance of unreinforced masonry shear walls

995

Modeling of influence of hydrological processes on the carbon cycle of a forest ecosystem

996

Modeling of influence of lithium vacancy on thermal conductivity in lithium aluminate

997

Modeling of influencing parameters in active noise control on an enclosure wall

998

Modeling of inherent SO2 capture in coal particles during combustion in fluidized bed

999

Modeling of initial crystallization in the alloys Al–10Ni and Al–5Ni–2.7Y at high undercoolings

1000

MODELING OF INITIAL INTENSE CONTRACTION IN SAND-STRUCTURE INTERFACES

بازگشت