بر اساس عنوان

1
Modelling hormonal response and development
2
Modelling hospital costs to produce evidence for policies that promote equity and efficiency
3
Modelling hot-carrier degradation of LDD NMOSFETs by using a high-resolution measurement technique.
4
Modelling hot-carrier degradation of LDD NMOSFETs by using a high-resolution measurement technique.
5
Modelling how carbon affects soil structure
6
Modelling human impacts on the Tasmanian wedge-tailed eagle (Aquila audax fleayi)
7
Modelling hunting strategies for the conservation of wild rabbit populations Original Research Article
8
Modelling hybrid distribution channels: a game-theoretic analysis
9
Modelling hydrodynamics and sediment flux within a macrotidal estuary: problems and solutions
10
Modelling hydrodynamics and turbulence in a bubble column using the Euler–Lagrange procedure
11
Modelling hydrodynamics and water quality in the separation waterway of the Yulin offshore industrial park, Taiwan
12
Modelling hydrodynamics in the Rio Paranل, Argentina: An evaluation and inter-comparison of reduced-complexity and physics based models applied to a large sand-bed river
13
Modelling hydroenvironmental and health risk assessment parameters along the South Wales Coast
14
Modelling hydrogen embrittlement in 316L austenitic stainless steel for the first wall of the Next European Torus
15
Modelling hydrogen partial pressure change as a result of competition between the butyric and propionic groups of acidogenic bacteria
16
Modelling hydrographic changes in the Labrador sea over the past five decades
17
Modelling hydrography and algal production in a poll in western Norway
18
Modelling hydrography and algal production in a poll in western Norway
19
MODELlING HYDROLOGIC PROCESSES DISTRIBUTION IN A TROPICAL FOREST WATERSHED in the PHILIPPINES
20
Modelling hydrological processes in created freshwater wetlands: an integrated system approach
21
Modelling hydrology and water quality in the pre-alpine/alpine Thur watershed using SWAT
22
Modelling hygro-thermo-mechanical behaviour of engineered clay barriers — validation phase
23
Modelling hyperbolic heat conduction in a finite medium with periodic thermal disturbance and surface radiation
24
Modelling hysteretic behaviour of cold-formed steel wall panels
25
Modelling ice conditions in the easternmost Gulf of Finland in the Baltic Sea
26
Modelling ice cover formation of a lake–river system with exceptionally high flows (Lake St. Martin and Dauphin River, Manitoba)
27
Modelling iceberg trajectories, sedimentation rates and meltwater input to the ocean from the Eurasian Ice Sheet at the Last Glacial Maximum
28
Modelling imaging based on core-loss spectroscopy in scanning transmission electron microscopy
29
Modelling imaging based on core-loss spectroscopy in scanning transmission electron microscopy
30
Modelling impact angle effects on erosion–corrosion of pure metals: Construction of materials performance maps
31
Modelling impact damage in composite laminates: A simulation of intra- and inter-laminar cracking
32
Modelling impact damage in marine composite panels
33
Modelling impact of agro-drought on grain production in China
34
Modelling impact of bottom roughness on sea surface temperature in the Sea of Iroise
35
Modelling impact of northerly wind-generated waves on sediments resuspensions in the Dover Strait and adjacent waters
36
Modelling impacts of alternative farming management practices on greenhouse gas emissions from a winter wheat–maize rotation system in China
37
Modelling impacts of climate change on water resources in ungauged and data-scarce watersheds. Application to the Siurana catchment (NE Spain) Original Research Article
38
Modelling impacts of climate change on wheat yields in England and Wales: assessing drought risks
39
Modelling impacts of cropping systems: Demands and solutions for DEX methodology
40
Modelling impacts of land use change and climate change on nitrate-nitrogen in the River Don, North East Scotland
41
Modelling imperfect advance demand information and analysis of optimal inventory policies
42
Modelling imperfect inspection over a finite horizon
43
Modelling imperfect inspection over a finite horizon
44
Modelling imperfect maintenance and the reliability of complex systems using superposed renewal processes
45
Modelling imperfect maintenance and the reliability of complex systems using superposed renewal processes
46
Modelling imperfectly appropriable R&D via spillovers
47
Modelling impingement of hollow metal droplets onto a flat surface
48
Modelling implications of the instability of the mean-variance paradigm in international finance Original Research Article
49
Modelling implicatures from modified numerals
50
Modelling implied volatility with OLS and panel data models
51
Modelling importance of sediment effects on fate and transport of enterococci in the Severn Estuary, UK
52
Modelling improvements in domestic energy efficiency
53
Modelling in Natural Sciences, Design, Validation and Case Studies, T. Müller, H. Müller (Eds.). Springer Verlag, Berlin, Heidelberg, New York (2003)
54
Modelling in Natural Sciences, Design, Validation and Case Studies, T. Müller, H. Müller (Eds.). Springer Verlag, Berlin, Heidelberg, New York (2003)
55
Modelling in situ activities of enzymes as a tool to explain seasonal variation of soil respiration from agro-ecosystems
56
Modelling in situ activities of enzymes as a tool to explain seasonal variation of soil respiration from agro-ecosystems
57
Modelling in surgical oncology—Part III: Massive data setsand complex systems
58
Modelling in the EU periphery : The HERMIN project
59
Modelling in tumour biology part 1: modelling conceptsand structures
60
Modelling in vitro growth of dense root networks
61
Modelling in vitro lung branching morphogenesis during development
62
Modelling In°ections in Romanian Language by P Systems with String Replication
63
Modelling inactivation of Listeria monocytogenes by pulsed electric fields in media of different pH
64
Modelling inactivation of Staphylococcus aureus and Yersinia enterocolitica by high-pressure homogenisation at different temperatures
65
Modelling incentives for collaboration in mobile ad hoc networks
66
Modelling income distribution in countries in transition: A computable general equilibrium analysis for Poland
67
Modelling income effects on long and short haul international travel from Japan
68
MODELLING INCOME PROTECTION CLAIM TERMINATION RATES BY CAUSE OF SICKNESS I: RECOVERIES
69
MODELLING INCOME PROTECTION CLAIM TERMINATION RATES BY CAUSE OF SICKNESS II: MORTALITY OF UK ASSURED LIVES
70
MODELLING INCOME PROTECTION CLAIM TERMINATION RATES BY CAUSE OF SICKNESS III: MORTALITY
71
Modelling Indentation of Bread Crumb by Finite Element Analysis
72
Modelling Indian Ocean responses to low frequency fluctuations in observed wind patterns
73
Modelling indicators and indices of landscape complexity: an approach using G.I.S.
74
Modelling individual and collective species responses to climate change within Small Island States
75
Modelling individual behaviour and group performance in an intelligent agent-based simulation of the tragedy of the commons
76
Modelling individual movements in heterogeneous landscapes: potentials of a new approach
77
Modelling individual movements in heterogeneous landscapes: potentials of a new approach
78
Modelling indoor air and hygrothermal wall interaction in building simulation: Comparison between CFD and a well-mixed zonal model
79
Modelling indoor illumination by complex fenestration systems based on bidirectional photometric data
80
Modelling inductively coupled plasmas: a sensitivity study on plasma chemistry and surface chemistry
81
Modelling industrial energy use: The IEAs Energy Technology Perspectives
82
Modelling industrial scale high-pressure-low-temperature processes Original Research Article
83
Modelling Inert Gas Exchange in Tissue and Mixed–Venous Blood Return to the Lungs
84
Modelling inertial effects in periodic fluid–structure systems with an homogenisation approach: Application to seismic analysis of tube bundles
85
Modelling Infiltration and quantifying Spatial Soil Variability in a Wasteland of Kharagpur, India
86
Modelling inflation and the demand for money in Pakistan; cointegration and the causal structure
87
Modelling inflation in China—A regional perspective
88
Modelling inflation persistence with periodicity changes in fixed and predetermined prices models
89
Modelling information flow for organisations: A review of approaches and future challenges
90
Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: Effect of coke bed porosities
91
Modelling inhaled particle deposition in the human lung—A review
92
Modelling innovative activity in the New Zealand biotechnology sector Original Research Article
93
Modelling inorganic aluminium with WHAM in environmental monitoring
94
Modelling inorganic and organic biocide leaching from CBA-amine (Copper–Boron–Azole) treated wood based on characterisation leaching tests Original Research Article
95
Modelling inpatient length of stay by a hierarchical mixture regression via the EM algorithm
96
Modelling input of fine granular sediment into drainage systems via gully-pots
97
MODELLING IN-SEWER CHANGES IN WASTEWATER QUALITY UNDER AEROBIC CONDITIONS
98
MODELLING IN-SEWER CHANGES IN WASTEWATER QUALITY UNDER AEROBIC CONDITIONS
99
Modelling instability of flow using a mode interaction between steady and Hopf bifurcations with rotational symmetries of the cube
100
Modelling instantaneous traffic emission and the influence of traffic speed limits
101
Modelling instream nitrogen variability in the Dee catchment, NE Scotland
102
Modelling in-stream temperature and dissolved oxygen at sub-daily time steps: An application to the River Kennet, UK Original Research Article
103
Modelling in-stream water quality in LOIS
104
Modelling Integrated Multi-item Supplier Selection with Shipping Frequencies
105
Modelling inter- and transgranular fracture in piezoelectric polycrystals
106
Modelling interactions and feedback mechanisms between land use change and landscape processes
107
Modelling interactions between farm-level structural adjustment and a regional economy: A case of the Australian rice industry
108
Modelling interactions between Loop1 of Fasciculin2 (Fas2) and Torpedo californica acetylcholinesterase (TcAChE)
109
Modelling interactions between scavenger behaviour and farming practices: Impacts on scavenger population and ecosystem service efficiency
110
Modelling interactions between scavenger behaviour and farming practices: Impacts on scavenger population and ecosystem service efficiency
111
Modelling interannual and spatial variability of leaf senescence for three deciduous tree species in France
112
Modelling interception in coastal and montane rainforests in northern Queensland, Australia
113
Modelling interception loss from evergreen oak Mediterranean savannas: Application of a tree-based modelling approach
114
Modelling interface aesthetics
115
Modelling interface diffusion creep in two-phase materials Original Research Article
116
Modelling interfacial charge transfer in dye-sensitised solar cells
117
Modelling intermixing of short period strained layer superlattices by means of X-ray diffraction analysis
118
Modelling intermixing of short period strained layer superlattices by means of X-ray diffraction analysis
119
Modelling Internal Solitary Waves in the Coastal Ocean
120
Modelling international capital structure under foreign macroeconomic volatility
121
Modelling international monthly arrivals using seasonal univariate long-memory processes
122
Modelling international tourism and country risk spillovers for Cyprus and Malta
123
Modelling inter-provincial migration in Burkina Faso, West Africa: the role of socio-demographic and environmental factors
124
Modelling interstate tourism demand in Australia: A cointegration approach Original Research Article
125
Modelling intertemporal choices: An anomaly approach
126
Modelling intertidal sediment transport for nutrient change and climate change scenarios
127
Modelling inter-urban transport flows in Italy: A comparison between neural network analysis and logit analysis
128
Modelling interval data with Normal and Skew-Normal distributions
129
Modelling inter-yarn friction in woven fabric armour
130
Modelling intonation contours at the phrase level using continuous density hidden Markov models
131
Modelling intragranular fission gas release in irradiation of sintered LWR UO2 fuel
132
Modelling intransitive preferences: A random-effects approach
133
Modelling introduced predator and herbivore distribution in the Tanami Desert, Australia
134
Modelling intrusion detection as an allocation problem
135
Modelling investment and implementation of technological progress in metal industries. Theory and application to the German primary aluminium industry
136
Modelling ion composition in simulated milk ultrafiltrate (SMUF) II. Influence of pH, ionic strength and polyphosphates
137
Modelling ion composition in simulated milk ultrafiltrate (SMUF). I: Influence of calcium phosphate precipitation
138
Modelling ion conduction pathways by bond valence pseudopotential maps
139
Modelling ion diffusion mechanisms in porous media
140
Modelling iron ore degradation using a twin pendulum breakage device
141
Modelling iron-bentonite interactions
142
Modelling iron–clay interactions in deep geological disposal conditions
143
Modelling irradiance on inclined planes with an anisotropic model
144
Modelling irradiation effects in fusion materials
145
Modelling irradiation induced glass transition in thin films
146
Modelling irrigation scheduling to analyse water management at farm level, during water shortages
147
Modelling IrSC: proposal options and performance analysis
148
Modelling isothermal and non-isothermal recrystallisation kinetics: Application to Zircaloy-4
149
Modelling isotope fractionation during primary cracking of natural gas: a reaction kinetic approach
150
Modelling IT projects success with Fuzzy Cognitive Maps
151
Modelling IT projects success: Emerging methodologies reviewed
152
Modelling jarosite precipitation in isothermal chalcopyrite bioleaching columns
153
Modelling Jet Flow and Losses in Sprinkler Irrigation: Overview and Perspective of a New Approach
154
Modelling jet quenching
155
Modelling junctions of thin plates
156
Modelling karst geomorphology on different time scales
157
Modelling kinetics of plant canopy architecture---concepts and applications
158
Modelling Knowledge and Game Based Learning: Model Driven Approach
159
Modelling knowledge strategy for solving the DNA sequence annotation problem through CommonKADS methodology
160
Modelling labour market dynamics with on-the-job search
161
Modelling Lake Glumsّ with learning
162
Modelling Lake Glumsّ with learning
163
Modelling laminar pulsed flow for the enhancement of cleaning
164
Modelling land cover dynamics: integration of fine-scale land cover data with landscape attributes
165
Modelling land degradation in the Nepalese Himalaya
166
Modelling land surface–atmosphere interactions over the Australian continent with an emphasis on the role of soil moisture
167
Modelling land use change and environmental impact
168
Modelling land use change by an integrated Cellular Automata and Markov Chain Model (case study; Azadshahr County)
169
Modelling land use change impacts for sustainability assessment
170
Modelling land use change with generalized linear models—a multi-model analysis of change between 1860 and 2000 in Gallatin Valley, Montana
171
Modelling land use changes for landscape connectivity: The role of plantation forestry and highways
172
Modelling land-cover-induced variations in hydrologic response: Picaninny Creek, Victoria
173
Modelling land-cover-induced variations in hydrologic response: Picaninny Creek, Victoria
174
Modelling landscape distributions of large forest owls as applied to managing forests in north-east Victoria, Australia Original Research Article
175
Modelling landscape effects on density–contact rate relationships of deer in eastern Alberta: Implications for chronic wasting disease
176
Modelling landscape effects on density–contact rate relationships of deer in eastern Alberta: Implications for chronic wasting disease
177
Modelling landscape evolution in the Waipaoa catchment, New Zealand — A phenomenalogical approach
178
Modelling landscape evolution under ice sheets
179
Modelling landslide hazard, soil redistribution and sediment yield of landslides on the Ugandan footslopes of Mount Elgon
180
Modelling Landslides Induced by Rainfall: A Coupled Approach
181
Modelling Land-use and Land-cover Changes Using Markov-CA, and Multiple Decision Making in Kirkuk City
182
Modelling land-use change for Central America, with special reference to the impact of hurricane Mitch
183
Modelling land-use change for Central America, with special reference to the impact of hurricane Mitch
184
Modelling land-use sustainability using farmland birds as indicators
185
Modelling lane changing and merging in microscopic traffic simulation
186
Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: Application to a high density polyethylene
187
MODELLING LARGE URBAN DRAINAGE SYSTEMS IN REAL TIME
188
MODELLING LARGE URBAN DRAINAGE SYSTEMS IN REAL TIME
189
Modelling large-scale effects of estuarine and morphodynamic gradients on distribution and abundance of the sandy beach isopod Excirolana armata
190
Modelling large-scale laboratory HTO and strontium diffusion experiments in Mont Terri and Bure clay rocks
191
Modelling larval dispersal and settlement of the reef-building polychaete Sabellaria alveolata: Role of hydroclimatic processes on the sustainability of biogenic reefs
192
Modelling laser induced melting
193
Modelling Late Miocene vegetation in Europe: Results of the CARAIB model and comparison with palaeovegetation data
194
Modelling Late Oligocene C4 grasses and climate
195
Modelling Late Pleistocene megafaunal extinction and critical cases: A simple prey–predator perspective
196
Modelling Late Pleistocene megafaunal extinction and critical cases: A simple prey–predator perspective
197
Modelling lateral entrapment of suspended sediment in estuaries: The role of spatial lags in settling and M4 tidal flow
198
Modelling leachate generation and mobility from copper sulphide tailings – An integrated approach to impact assessment
199
Modelling leaf chlorophyll content in broadleaf and needle leaf canopies from ground, CASI, Landsat TM 5 and MERIS reflectance data
200
Modelling leaf development in Oxalis latifolia
201
Modelling leaf gas exchanges to predict functional trends in Mediterranean Quercus Ilex forest under climatic changes in temperature
202
Modelling leaf gas exchanges to predict functional trends in Mediterranean Quercus Ilex forest under climatic changes in temperature
203
Modelling leaf mass per area in forest canopy as affected by prevailing radiation conditions
204
Modelling leaf mass per area in forest canopy as affected by prevailing radiation conditions
205
Modelling leaf wetness duration and downy mildew simulation on grapevine in Italy
206
Modelling leaf wetness duration during the rosette stage of oilseed rape
207
Modelling Learning in Economics; Thomas Brenner; Edward Elgar Publishing Limited, Cheltenham, UK and Northampton, MA, 1999; pp. 352, ISBN 1 84064 134 7, £65.00 (hardback)
208
Modelling level change in lakes using neuro-fuzzy and artificial neural networks
209
Modelling LGD Using Survival Analysis
210
Modelling lifestyle effects on energy demand and related emissions
211
Modelling lifted hydrogen jet fires using the boundary layer equations
212
Modelling light-pipe performances—a natural daylighting solution
213
Modelling linear and nonlinear behavior of polycrystalline ferroelectric ceramics
214
Modelling line-axis solar concentrators in the medium temperature range
215
Modelling liquefied-natural-gas processes using highly accurate property models
216
Modelling Liquidity Risk Management in Banking Using System Dynamics Approach
217
Modelling liquid–liquid equilibria for island type ternary systems
218
MODELLING LIQUID–STRUCTURE INTERACTIONS WITHIN THE FRAMEWORK OF STATISTICAL ENERGY ANALYSIS
219
Modelling lithium ion transport in helical PEO by ab initio calculations
220
Modelling liver tissue properties using a non-linear visco-elastic model for surgery simulation
221
Modelling llama population development under environmental and market constraints in the Bolivian highlands
222
Modelling llama population development under environmental and market constraints in the Bolivian highlands
223
Modelling LLE and VLE of methanol + n-alkane series using GC-PC-SAFT with a group contribution kij
224
Modelling load–settlement behaviour of piles using high-order neural network (HON-PILE model)
225
Modelling load–settlement behaviour of piles using high-order neural network (HON-PILE model)
226
Modelling local and global effects on the risk of contracting Tuberculosis using stochastic Markov-chain models
227
Modelling local and long-distance dispersal of invasive chestnut gall wasp in Europe
228
Modelling local and long-distance dispersal of invasive chestnut gall wasp in Europe
229
Modelling local and synoptic scale influences on ozone concentrations in a topographically complex region of Southern Italy
230
Modelling local distribution of an Arctic dwarf shrub indicates an important role for remote sensing of snow cover
231
Modelling local heat and mass transfer in food slabs due to air jet impingement Original Research Article
232
Modelling localised nonlinearities using the harmonic nonlinear super model
233
Modelling local-scale determinants and the probability of microarthropod species occurrence in Antarctic soils
234
Modelling local-scale determinants and the probability of microarthropod species occurrence in Antarctic soils
235
Modelling long-memory volatilities with leverage effect: A-LMSV versus FIEGARCH
236
Modelling long-range transport of primary particulate material over Europe
237
Modelling long-run cost minimization and environmental provisions for utility expansion
238
Modelling long-term C dynamics in croplands in the context of climate change: a case study from Ohio
239
Modelling long-term changes of mesospheric temperature and chemistry Original Research Article
240
Modelling long-term diffuse nitrate pollution at the catchment-scale: Data, parameter and epistemic uncertainty
241
Modelling long-term oil price and extraction with a Hubbert approach: The LOPEX model
242
Modelling long-term peatland dynamics. I. Concepts, review, and proposed design
243
Modelling long-term peatland dynamics. I. Concepts, review, and proposed design
244
Modelling long-term peatland dynamics. II. Processes and rates as inferred from litter and peat-core data
245
Modelling long-term peatland dynamics. II. Processes and rates as inferred from litter and peat-core data
246
Modelling long-term stream acidification in the chemically heterogeneous Upper Severn catchment, Mid-Wales
247
Modelling long-term tidal marsh growth under changing tidal conditions and suspended sediment concentrations, Scheldt estuary, Belgium
248
Modelling losses using an exponential-inverse Gaussian distribution
249
Modelling low molecular weight organic acid dynamics in forest soils
250
Modelling low molecular weight organic acid dynamics in forest soils
251
Modelling low-cycle fatigue life of particulate-reinforced metal-matrix composites
252
Modelling low-cycle fatigue life of particulate-reinforced metal-matrix composites
253
Modelling low-energy cooling strategies for underground railways
254
Modelling low-temperature carbonisation of solid fuels in a heated rotary kiln for clean fuel production
255
Modelling low-temperature methane production from cattle manure by an acclimated microbial community
256
Modelling lumped-parameter sorption kinetics and diffusion dynamics of odour-causing VOCs to dust particles
257
Modelling macroalgae (Ulva rigida) in the Venice lagoon: Model structure identification and first parameters estimation
258
Modelling macroalgae (Ulva rigida) in the Venice lagoon: Model structure identification and first parameters estimation
259
Modelling macroalgae using a 3D hydrodynamic-ecological model in a shallow, temperate estuary
260
Modelling macroalgae using a 3D hydrodynamic-ecological model in a shallow, temperate estuary
261
Modelling macroeconomic shocks in the CFA Franc Zone
262
Modelling macroscopic and baby universes by fundamental strings Original Research Article
263
Modelling macroscopic imperfections for the prediction of flow localization and fracture
264
Modelling magnetic forces during asymmetric vertical displacement events in JET
265
Modelling magnetically dominated and radiatively cooling jets
266
Modelling magnetism of C at O and B monovacancies in graphene Original Research Article
267
Modelling Mailing List Behaviour in Open Source Projects: the Case of ARM Embedded Linux
268
Modelling Malaysia stock markets using GARCH, EGARCH and copula models
269
MODELLING MALWARE PROPAGATION ON THE INTERNET OF THINGS USING AN AGENT-BASED APPROACH ON COMPLEX NETWORKS
270
Modelling mammalian extinction and forecasting recovery: koalas at Iluka (NSW, Australia) Original Research Article
271
Modelling Mammary Metabolism in the Dairy Cow to Predict Milk Constituent Yield, with Emphasis on Amino Acid Metabolism and Milk Protein Production: Model Construction
272
Modelling Mammary Metabolism in the Dairy Cow to Predict Milk Constituent Yield, with Emphasis on Amino Acid Metabolism and Milk Protein Production: Model Evaluation
273
Modelling manufacturing evolution: thoughts on sustainable industrial development
274
Modelling marine ecosystems as a discipline in Earth Science
275
Modelling marine phytoplankton growth under eutrophic conditions
276
Modelling market diffusion of electric vehicles with real world driving data — Part I: Model structure and validation
277
Modelling masonry arches shape using terrestrial laser scanning data and nonparametric methods
278
Modelling mass failure in a Mediterranean mountain environment: climatic, geological, topographical and erosional controls
279
Modelling Mass Transfer during Hot Air Drying of Banana Using Cellular Automaton
280
Modelling mass transfer in the PCA process using the Maxwell–Stefan approach
281
Modelling mass transfer phenomena and quantification of ventilation performance in a full scale installation
282
Modelling mass transport in hollow fibre membranes used for pressure retarded osmosis
283
Modelling massive sulphate aerosol pollution, following the large 1783 Laki basaltic eruption
284
Modelling material transfer in metal rolling using plasticine
285
Modelling material transfer on a single asperity scale
286
Modelling materials driven far from equilibrium
287
Modelling mating success of saproxylic beetles in relation to search behaviour, population density and substrate abundance
288
Modelling matrix damage and fibre–matrix interfacial decohesion in composite laminates via a multi-fibre multi-layer representative volume element (M2RVE)
289
Modelling mean reversion of asset prices towards their fundamental value
290
Modelling mechanical properties for non-hardenable aluminium alloys
291
Modelling Mechanical Properties of AISI 439430Ti Ferritic Stainless Steel Sheet
292
Modelling mechanical properties of core–shell rubber-modified epoxies Original Research Article
293
Modelling mechanical property recovery of a linepipe steel in annealing process
294
Modelling melting rates in upwelling mantle
295
Modelling memory processes and Internet response times: Weibull or power-law?
296
Modelling Mercuryʹs magnetosphere and plasma entry through the dayside magnetopause
297
Modelling meristem development in plants
298
Modelling metabolic energy by neural networks
299
Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems
300
Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems
301
Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems
302
Modelling metal desorption kinetics in estuaries
303
Modelling metal interactions at fish gills
304
Modelling metallothionein induction in the liver of Sparus aurata exposed to metal-contaminated sediments
305
Modelling metapopulations with stochastic membrane systems
306
Modelling meteor ablation in the venusian atmosphere
307
Modelling methanol recovery in wine distillation stills with packing columns
308
Modelling methodology of silicon oxidation from quantum calculations to Monte Carlo level
309
Modelling methodology of silicon oxidation from quantum calculations to Monte Carlo level
310
Modelling methods for co-fired pulverised fuel furnaces
311
Modelling methods of historic masonry buildings under seismic excitation
312
Modelling metolachlor exports in subsurface drainage water from two structured soils under maize (eastern France)
313
Modelling microbial adaptation to changing availability of substrates
314
Modelling microbial growth in structured foods: towards a unified approach
315
Modelling microbial transport in simulated low-grade heap bioleaching systems: The biomass transport model
316
Modelling microclimate in urban environments and assessing its influence on the performance of surrounding buildings
317
Modelling Microcystis aeruginosa bloom dynamics in the Nakdong River by means of evolutionary computation and statistical approach
318
Modelling Microcystis aeruginosa bloom dynamics in the Nakdong River by means of evolutionary computation and statistical approach
319
Modelling micro-habitat temperature for Dendroctonus ponderosae (coleoptera: scolytidae)
320
Modelling micro-habitat temperature for Dendroctonus ponderosae (coleoptera: scolytidae)
321
Modelling micromachines with elastic parts in a viscous environment
322
Modelling microorganisms in food, Stanley Brul, Suzanne van Gerwen and Marcel Zwitering (eds.), CRC Press, Woodhead Publishing Limited, Cambridge, England, 2007, xiv+ 294 pages, hardback, £130.00 / US $245.00 / ecu 190.00 (+p&p), ISBN 1 84569 006 0, W
323
Modelling microstructural evolution of porous polycrystalline materials and a numerical study of anisotropic sintering
324
Modelling microstructure evolution in engineering materials
325
Modelling microstructure evolution toward ultrafine crystallinity produced by severe plastic deformation
326
Modelling microstructure evolution towards ultrafine crystallinity produced by severe plastic deformation
327
Modelling microtopography in boreal peatlands: hummocks and hollows
328
Modelling microtopography in boreal peatlands: hummocks and hollows
329
Modelling microwave heating
330
Modelling migration behavior of peptide hormones in capillary electrophoresis-electrospray mass spectrometry
331
Modelling migration from paper into a food simulant
332
Modelling migration: the clock-and-compass model can explain the distribution of ringing recoveries
333
Modelling mineral dust within an atmospheric general circulation model
334
Modelling mineralization of plant residues on soil: effect of physical protection
335
Modelling Miscanthus yields with low resolution input data
336
Modelling Miscanthus yields with low resolution input data
337
Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation – Part I: Model description
338
Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation – Part II: Illustrative modelling results and parameter studies
339
Modelling mixed forest growth: a review of models for forest management
340
Modelling mixed forest growth: a review of models for forest management
341
Modelling mixed layer depth and plankton biomass off the west coast of South Island, New Zealand
342
Modelling mixed lubrication for deep drawing processes
343
Modelling mobile species population changes in electroactive films under thermodynamically and kinetically controlled conditions
344
Modelling mobility: A discrete revolution
345
Modelling moisture distribution in wooden cladding board as a result of short-term single-sided water soaking
346
Modelling molecular weight changes induced in polydimethylsiloxane by gamma and electron beam irradiation
347
Modelling molybdate and tungstate adsorption to ferrihydrite
348
Modelling monetary economies
349
Modelling money demand in the United Arab Emirates
350
Modelling Moniliophthora roreri in Costa Rica
351
Modelling mono-digestion of grass silage in a 2-stage CSTR anaerobic digester using ADM1
352
Modelling monthly streamflows in two Australian dryland rivers: Matching model complexity to spatial scale and data availability
353
Modelling Morphogenesis: From Single Cells to Crawling Slugs
354
Modelling mould growth under suboptimal environmental conditions and inoculum size Original Research Article
355
Modelling mould spoilage in cold-filled ready-to-drink beverages by Aspergillus niger and Penicillium spinulosum Original Research Article
356
Modelling multibody systems with indirect coordinates Original Research Article
357
Modelling multicomponent adsorption process by a moving finite element method
358
Modelling multi-dimensional crystallization of polymers in interaction with heat transfer
359
Modelling multilateral negotiations: An application to California water policy
360
Modelling multi-limb transformers with an electromagnetic transient program Original Research Article
361
Modelling multinational telecommunications demand with limited data
362
Modelling multi-nutrient interactions in phytoplankton; balancing simplicity and realism
363
Modelling multiple cohesive crack propagation using a finite element–scaled boundary finite element coupled method
364
Modelling multiple mineral precipitation in anaerobic digester liquor
365
Modelling multiple objectives of land use for sustainable development
366
Modelling multiple radon entry and transport in a domestic dwelling
367
Modelling multiple term structures of defaultable bonds with common and idiosyncratic state variables
368
Modelling multi-relational data with special attention to the average number of collaborators as a variable in informetric distributions
369
Modelling multi-scale spatial variation in species richness from abundance data in a complex neotropical bat assemblage
370
Modelling multi-scale spatial variation in species richness from abundance data in a complex neotropical bat assemblage
371
Modelling multi-species interactions in the Barents Sea ecosystem with special emphasis on minke whales and their interactions with cod, herring and capelin
372
Modelling multi-stage manufacturing systems for efficient scheduling
373
Modelling multi-stage processes through multivariate distributions
374
Modelling multi-tour inventory routing problem for deteriorating items with time windows
375
Modelling multivariate biomechanical measurements of the spine during a rowing exercise
376
Modelling multivariate failure time associations in the presence of a competing risk
377
Modelling multivariate international tourism demand and volatility
378
Modelling multi-viscosity systems with dissipative particle dynamics
379
Modelling multi-year coupled carbon and water fluxes in a boreal aspen forest
380
Modelling municipal solid waste generation: A review
381
Modelling muscle activity in standing with considerations for bone safety
382
Modelling muscle energy-metabolism in anaerobic muscle
383
Modelling muscle motor conformations using low-angle Xray diffraction
384
Modelling mussel growth in ecosystems with low suspended matter loads
385
Modelling mussel growth in ecosystems with low suspended matter loads using a Dynamic Energy Budget approach
386
Modelling N mineralization from bovine manure and sewage sludge composts
387
Modelling N mineralization from green manure and farmyard manure from a laboratory incubation study
388
Modelling N mineralization from green manure and farmyard manure from a laboratory incubation study
389
Modelling N mineralization of vegetable crop residues during laboratory incubations
390
Modelling N mineralization of vegetable crop residues during laboratory incubations
391
Modelling N2O emission from a forest upland soil: A procedure for an automatic calibration of the biogeochemical model Forest-DNDC
392
Modelling N2O emission from a forest upland soil: A procedure for an automatic calibration of the biogeochemical model Forest-DNDC
393
Modelling Na and Cl concentrations in the recycling nutrient solution of a closed-cycle pepper cultivation
394
Modelling nanoparticles formation in the plasma plume induced by nanosecond pulsed lasers
395
Modelling native fish richness to evaluate the effects of hydromorphological changes and river restoration (Júcar River Basin, Spain) Original Research Article
396
Modelling Natural Burst Firing in Nigral Dopamine Neurons
397
Modelling natural capital: The case of landscape restoration on the South Downs, England
398
Modelling natural conditions and impacts of consumptive water use and sedimentation of Lake Abaya and Lake Chamo, Ethiopia
399
Modelling natural convection in a heated vertical channel for room ventilation
400
Modelling natural disturbances in forest ecosystems: a review
401
Modelling natural disturbances in forest ecosystems: a review
402
Modelling natural drying efficiency in covered and uncovered piles of whole broadleaf trees for energy use
403
Modelling natural resource responses to climate change (the MONARCH project): an introduction
404
Modelling NDVI from decadal rainfall data in the North East Arid Zone of Nigeria
405
Modelling near infrared instrument differences by chemometric methods: testing for near infrared forage analysis
406
Modelling near-surface soil temperature and moisture for germination response predictions of post-wildfire seedbeds
407
Modelling negatives in stochastic reserving models
408
Modelling negotiated decision making in environmental and natural resource management: A multilateral, multiple issues, non-cooperative bargaining model with uncertainty
409
Modelling Neighbourhood Satisfaction Of Residents In High- And Medium-Density Neighbourhoods Of Lagos City, Nigeria
410
Modelling nematode movement using time-fractional dynamics
411
Modelling nematode population growth and damage
412
Modelling nesting habitat as a conservation tool for the Eurasian black vulture (Aegypius monachus) in Dadia Nature Reserve, northeastern Greece Original Research Article
413
Modelling net erosion responses to enviroclimatic changes recorded upon multisecular timescales
414
Modelling net radiation at surface using “in situ” netpyrradiometer measurements with artificial neural networks
415
Modelling Net Radiative Measurement of Meteorological Parameters Using MERRA-2 Data in Sub-Sahara African Town
416
Modelling network travel time reliability under stochastic demand
417
Modelling Neural Development, Arjen van Ooyen. The MIT, Cambridge, Massachusetts (2003), ISBN: 0-262-22066-0
418
Modelling neural network performance through response surface methodology for classifying Twood veneer defects
419
MODELLING NEW SUCCESS CRITERIA FOR PROJECTS IN THE ICT INDUSTRY
420
Modelling Ni-mH battery using Cauer and Foster structures
421
Modelling Nimonic 80A rheological behaviour through artificial neural networks
422
Modelling nitrate and bromide leaching from sewage sludge
423
Modelling nitrate and bromide leaching from sewage sludge
424
Modelling nitrate losses in drainage water using DRAINMOD 5.0
425
Modelling nitrate reduction in a flow-through catalytic membrane contactor: Role of pore confining effects on water viscosity
426
Modelling nitrate transport and turnover in a lowland catchment system
427
Modelling nitrate transport in the Slapton Wood catchment using SHETRAN
428
Modelling nitrate transport under row intercropping system: Vines and grass cover
429
Modelling nitrification in the river Zarka of Jordan
430
Modelling nitrification, heterotrophic growth and predation in activated sludge
431
Modelling Nitrogen and Phosphorus Content at Early Growth Stages in Spring Barley using Hyperspectral Line Scanning
432
Modelling nitrogen atom flux in post-discharge nitriding processes
433
Modelling nitrogen cycles of farming systems as basis of site- and farm-specific nitrogen management
434
Modelling Nitrogen Cycling in a Mariculture Ecosystem as a Tool to Evaluate its Outflow
435
Modelling nitrogen dynamics in citrus trees
436
Modelling nitrogen dynamics of a constructed wetland: Nutrient removal process with variable yield Original Research Article
437
Modelling nitrogen excretion, elephant grass growth and animal production in a stall-feeding dairy system
438
Modelling nitrogen fluxes from the land to the coastal zone in European systems: a perspective from the INCA project
439
Modelling nitrogen fluxes in oligotrophic environments: NW Mediterranean and NE Atlantic
440
Modelling nitrogen fluxes in oligotrophic environments: NW Mediterranean and NE Atlantic
441
Modelling nitrogen in the Yeşilirmak River catchment in Northern Turkey: Impacts of future climate and environmental change and implications for nutrient management Original Research Article
442
Modelling nitrogen leaching from sewage sludge application to arable land in the Lombardy region (northern Italy) Original Research Article
443
Modelling nitrogen leaching: Are we getting the right answer for the right reason?
444
Modelling nitrogen loads at the catchment scale under the influence of land use
445
Modelling nitrogen mineralization from manures: representing quality aspects by varying C:N ratio of sub-pools
446
Modelling nitrogen mineralization from manures: representing quality aspects by varying C:N ratio of sub-pools
447
Modelling nitrogen oxide emissions in turbulent flames with air dilution: Application to LES of a non-premixed jet-flame
448
Modelling nitrogen pressure in river basins: A comparison between a statistical approach and the physically-based SWAT model
449
Modelling nitrogen removal in a coupled HRP and unplanted horizontal flow subsurface gravel bed constructed wetland
450
Modelling nitrogen saturation and carbon accumulation in heathland soils under elevated nitrogen deposition
451
Modelling nitrogen transformation and removal in primary facultative ponds
452
Modelling nitrogen transformation and removal in primary facultative ponds
453
Modelling nitrogen transformations in waters receiving mine effluents Original Research Article
454
Modelling nitrogen, primary production and oxygen in a Mediterranean lagoon. Impact of oysters farming and inputs from the watershed
455
Modelling nitrogen, primary production and oxygen in a Mediterranean lagoon. Impact of oysters farming and inputs from the watershed
456
Modelling nitrous oxide and carbon dioxide emission from soil in an incubation experiment Original Research Article
457
Modelling nitrous oxide emissions from grazed grasslands in New Zealand
458
Modelling nocturnal heat dynamics and frost mitigation in Andean raised field systems
459
Modelling nominal debt contracts and fixed rate deb
460
Modelling nominal debt contracts and fixed rate debt
461
Modelling nondestructive impacts macroscopically
462
Modelling non-equilibrium concentrations of microcontaminants in organisms: Comparative kinetics as a function of species size and octanol-water partitioning
463
Modelling non-Fourier heat conduction with periodic thermal oscillation using the finite integral transform
464
Modelling non-functional requirements of business processes
465
Modelling non-Gaussian random fields using transformations and Hermite polynomials
466
Modelling non-isothermal absorption of vapour into expanding liquid sheets
467
Modelling non-isothermal kinetics of biomass prepyrolysis at low pressure
468
Modelling nonlinear count time series with local mixtures of Poisson autoregressions
469
Modelling nonlinear count time series with local mixtures of Poisson autoregressions
470
Modelling non-linear creep behaviour of an epoxy adhesive
471
Modelling nonlinear dynamics of bolted assemblies
472
Modelling non-linear heat conduction via a fast matrix-free implicit unstructured-hybrid algorithm Original Research Article
473
Modelling nonlinear sequence generators in terms of linear cellular automata
474
Modelling nonlinear systemsby scale considerations
475
Modelling nonlinear viscoelasticity and damage in amorphous glassy polymers
476
Modelling non-linear water table dynamics and specific discharge through landscape analysis
477
Modelling nonlinearities and heavy tails via threshold normal mixture GARCH models
478
Modelling nonlinearities and heavy tails via threshold normal mixture GARCH models
479
Modelling non-periodic systems by binary uniform substitution sequences
480
Modelling non-perturbative corrections to bottom-quark fragmentation Original Research Article
481
Modelling nonstationary dynamics
482
Modelling non-stationary variance of soil properties by tempering an empirical spectrum
483
Modelling non-structural carbohydrates in forage grasses with weather data
484
Modelling North American palaeo-subglacial lakes and their meltwater drainage pathways
485
MODELLING NOx EMISSIONS DURING STAGED COMBUSTION
486
MODELLING NOx EMISSIONS DURING STAGED COMBUSTION
487
Modelling NOx from lightning and its impact on global chemical fields
488
Modelling nuclear effects in neutrino scattering
489
Modelling nucleon-nucleon scattering above 1 GeV
490
Modelling nucleophilic substitution at silicon using hypervalent silicon compounds based on di and tri halosilanes
491
Modelling nucleophilic substitution at silicon using hypervalent silicon compounds based on urea ligands
492
Modelling nucleophilic substitution at silicon using solution 19F-NMR chemical shift, 1JSiF and 2JCF coupling constant data of pentacoordinate silicon compounds. Correlation with other magnetic nuclei and X-ray structures
493
Modelling nutrient and chlorophyll a dynamics in an Irish brackish waterbody
494
Modelling nutrient emissions from river systems and loads to the coastal zone: Po River case study, Italy
495
Modelling nutrient emissions from river systems and loads to the coastal zone: Po River case study, Italy
496
Modelling nutrient fluxes from sub-arctic basins: Comparison of pristine vs. dammed rivers
497
Modelling nutrient mass balance in a temperate meso-tidal estuary: Implications for management
498
Modelling nutrient transport in Currency Creek, NSW with AnnAGNPS and PEST
499
Modelling nutrient transport in hollow fibre membrane bioreactors for growing three-dimensional bone tissue
500
Modelling Nutrient Utilization in Farm Animals
501
Modelling Nutrient Utilization in Farm Animals: J.P. McNamara, J. France, D.E. Beever (Eds.), CABI Publishing, 2000, 418 pp., hardcover, ISBN: 0851994490
502
Modelling nutrient-periphyton dynamics in streams with surface–subsurface exchange
503
Modelling nutrient-periphyton dynamics in streams with surface–subsurface exchange
504
Modelling nutrient-periphyton dynamics in streams: the importance of transient storage zones
505
Modelling nutrient-periphyton dynamics in streams: the importance of transient storage zones
506
Modelling Nutrients and ChlorophyllaTime Series in an Estuarine Upwelling Ecosystem (Ría de Vigo: NW Spain) Using the Box–Jenkins Approach
507
Modelling O2 and CO2 exchange for development of perforation-mediated modified atmosphere packaging Original Research Article
508
Modelling observed and future runoff from a glacierized tropical catchment (Cordillera Blanca, Perú)
509
Modelling ocean carbon cycle with a nonlinear convolution model
510
Modelling ocean currents in the northern Adriatic Sea
511
Modelling ocean–lagoon interaction during upwelling processes in the South West of New Caledonia
512
Modelling OECD industrial energy demand: Asymmetric price responses and energy-saving technical change
513
Modelling of [0/90] laminates subject to thermal effects considering mechanical curvature and through-the-thickness strain
514
Modelling of `barrierʹ modulation for cosmic ray protons in the outer heliosphere Original Research Article
515
Modelling of ‘thermal shocks’ in composite materials using a meshfree FEM
516
Modelling of 2,3,7,8-tetrachlorodibenzo-p-dioxin levels in a cohort of workers with exposure to phenoxy herbicides and chlorophenols
517
MODELLING OF 3-D MIXED-MODE FRACTURES NEAR PLANAR BIMATERIAL INTERFACES USING SURFACE INTEGRALS
518
Modelling of a 5-kW wind energy conversion system with induction generator and comparison with experimental results
519
Modelling of a borehole heat exchanger using a finite element with multiple degrees of freedom
520
Modelling of a Caledonian foreland basin in Sweden: petrophysical constraints
521
Modelling of a cathode-supported tubular solid oxide fuel cell operating with biomass-derived synthesis gas
522
Modelling of a chemisorption refrigeration and power cogeneration system
523
Modelling of a city canyon problem in a turbulent atmosphere using an equivalent sources approach
524
Modelling of a coiled tubular chemical reactor
525
Modelling of a combined heat and power (CHP) plant incorporating a heat pump for domestic use
526
Modelling of a combined image storage and image-SCR catalytic system for Diesel exhaust gas aftertreatment
527
Modelling of a condenser-fan control for an air-cooled centrifugal chiller
528
Modelling of a condenser-fan control for an air-cooled centrifugal chiller
529
Modelling of a continuous food pressing process by dimensional analysis
530
Modelling of a cracked aluminium plate repaired with composite octagonal patch in mode I and mixed mode
531
Modelling of a decarbonation reactor for geothermal waters: application to geothermal waters of Chott El Fejjej Original Research Article
532
Modelling of a diffusive Lotka-Volterra-System: the climate-induced shifting of tundra and forest realms in North-America
533
Modelling of a diffusive Lotka-Volterra-System: the climate-induced shifting of tundra and forest realms in North-America
534
Modelling of a domestic-scale co-generation plant thermal capacitance considerations
535
Modelling of a double-glass photovoltaic module using finite differences
536
Modelling of a european prototype hdr reservoir Original Research Article
537
Modelling of a Fe/III/biocoordination sphere including tyrosine
538
Modelling of a gas flow measurement: Application to nuclear containment vessels
539
Modelling of a hot box solar cooker
540
Modelling of a hybrid pixel detector for coherent X-ray diffractive imaging
541
Modelling of a hybrid pixel detector for coherent X-ray diffractive imaging
542
Modelling of a hydraulic engine mount with fluid–structure interaction finite element analysis
543
Modelling of a laboratory-scale bubbling fluidised-bed gasifier with feeds of both char and propane
544
Modelling of a low-pressure reverse osmosis system with concentrate recirculation to obtain high recovery levels Original Research Article
545
Modelling of a magnetic sensor based on vacuum field emission
546
Modelling of a magneto-rheological damper by evolving radial basis function networks
547
Modelling of a medium-term dynamics in a shallow tidal sea, based on combined physical and neural network methods
548
Modelling of a membrane bioreactor system for municipal wastewater treatment
549
Modelling of a modified air gap distillation membrane for the desalination of seawater Original Research Article
550
Modelling of a new solar air heater through least-squares support vector machines
551
Modelling of a photovoltaic heat recovery system and its role in a design decision support tool for building professionals
552
Modelling of a porous flowing electrolyte layer in a flowing electrolyte direct-methanol fuel cell
553
Modelling of a pressurised entrained flow coal gasifier: the effect of reaction kinetics and char structure
554
Modelling of a pump-power-controlled gain-locking system for multi-pump wideband Raman fibre amplifiers
555
Modelling of a PZT Beam for Voltage Generation
556
Modelling of a robotic leg using bond graphs
557
Modelling of a self-led critical friend topology in inter-cooperative grid communities
558
Modelling of a selforganization process leading to periodic arrays of nanometric amorphous precipitates by ion irradiation
559
Modelling of a SOFC graded cathode
560
Modelling of a special class of spherical parallel manipulators with Euler parameters
561
Modelling of a supercritical CO2 power cycle for nuclear fusion reactors using RELAP5–3D
562
Modelling of a thermal insulation system based on the coldest temperature conditions by using artificial neural networks to determine performance of building for wall types in Turkey
563
Modelling of a thermosyphon solar water heating system and simple model validation
564
Modelling of a thin soft layer on a self-lubricating ceramic composite
565
Modelling of a tool during turning: Analytical prediction of the temperature and of the heat flux at the tool’s tip
566
Modelling of a transmembrane evaporation module for desalination of seawater
567
Modelling of a transmission tower for lightning-surge analysis
568
Modelling of a trickle-bed reactor I. Extended definitions and new approximations
569
Modelling of a trickle-bed reactor II. The hydrogenation of 3-hydroxypropanal to 1,3-propanediol
570
Modelling of a two-dimensional Coulomb friction oscillator
571
Modelling of a two-phase thermofluidic oscillator for low-grade heat utilisation: Accounting for irreversible thermal losses
572
Modelling of a two-stage high-pressure gas reduction station
573
Modelling of a two-zone fluidised bed reactor for the oxidative dehydrogenation of n-butane
574
Modelling of a vertical ground coupled heat pump system by using artificial neural networks
575
Modelling of a vibrating reactor boundary and calculation of the induced neutron noise
576
Modelling of a vibro-impact capsule system
577
Modelling of a vibro-impact capsule system
578
Modelling of a wall fired furnace for different operating conditions using FLUENT
579
Modelling of a’fortiori reasoning
580
Modelling of abrasive particle energy in water jet machining
581
Modelling of Abrasive Waterjet Machining: A New Approach
582
Modelling of absorption and emission spectra of InxGa1−xN layers grown by MBE
583
Modelling of acid–base equilibria in binary-solvent systems: A comparative study
584
Modelling of acoustic agglomeration processes using the direct simulation Monte Carlo method
585
Modelling of acoustic wave propagation through the natural fiber composites
586
Modelling of adaptation processes of crops to water and nitrogen stress
587
Modelling of adhesive joints and predicting their strength with the use of neural networks
588
Modelling of adjustable speed drives for power system harmonic analysis
589
Modelling of Adsorption of Zinc and Silver Ions on Analcime and Modified Analcime Zeolites Using Central Composite Design
590
Modelling of advanced flowsheets using data from miniature contactor trials
591
Modelling of advanced structural materials for GEN IV reactors
592
Modelling of advanced tokamak scenarios with LHCD in Alcator C-Mod
593
Modelling of aerosol modification resulting from passage through a hill cap cloud
594
Modelling of aerosol particle nucleation, growth and turbulent mixing in a 1-dimensional model of the arctic marine boundary layer
595
Modelling of aerosol reentrainment from boiling pool during controlled filtered venting after a severe core melt accident
596
Modelling of aflatoxin G1 reduction by kefir grain using response surface methodology
597
Modelling of Ag3Sn coarsening and its effect on creep of Sn–Ag eutectics
598
Modelling of ageing effects on crack-bridging behaviour of AR-glass multifilament yarns embedded in cement-based matrix
599
Modelling of agglomeration in suspension: Application to salicylic acid microparticles
600
Modelling of aggregate restructuring in a weakly turbulent flow
601
Modelling of air flow and cloud fields over the Northern Pennines
602
Modelling of air pollution dispersion in Santiago de Chile
603
Modelling of air pollution on a military airfield
604
Modelling of air temperature using remote sensing and artificial neural network in Turkey Original Research Article
605
Modelling of airflow through a stack in a timber-drying kiln
606
Modelling of air–water exchange of PCBs in the Great Lakes
607
Modelling of AlAs/GaAs interfacial structures using high-angle annular dark field (HAADF) image simulations
608
Modelling of AlAs/GaAs interfacial structures using high-angle annular dark field (HAADF) image simulations
609
Modelling of Allocation and Balance of Carbon in Walnut (Juglans regiaL.) Seedlings during Heterotrophy-autotrophy Transition
610
Modelling of aluminium chemistry in soil solution of untreated and dolomite treated podzolic soil
611
Modelling of aluminium scrap melting in a rotary furnace
612
Modelling of aluminized coating growth on nickel Original Research Article
613
Modelling of ammonia emissions from naturally ventilated livestock buildings. Part 1: Ammonia release modelling Review Article
614
Modelling of ammonia emissions from naturally ventilated livestock buildings. Part 3: CFD modelling Review Article
615
Modelling of ammonia emissions from naturally ventilated livestock buildings: Part 2, air change modelling Review Article
616
Modelling of ammonium fumarate recovery from model solutions by nanofiltration and reverse osmosis
617
Modelling of an adsorption chiller for dynamic system simulation
618
Modelling of an adsorption system driven by engine waste heat for truck cabin A/C. Performance estimation for a standard driving cycle
619
Modelling of an Agricultural Watershed using Remote Sensing and a Geographic Information System
620
MODELLING OF AN ALTERNATING OXIDATION DITCH SYSTEM
621
MODELLING OF AN ALTERNATING OXIDATION DITCH SYSTEM
622
Modelling of an arch dam by polynomial interpolation Original Research Article
623
Modelling of an ASR countercurrent pyrolysis reactor with nonlinear kinetics
624
Modelling of an asteroid photoelectron sheath and implications for a sample return mission
625
Modelling of an autoclave used for high pressure sulphuric acid/oxygen leaching of first stage leach residue, Part 2: Model application
626
Modelling of an autoclave used for high pressure sulphuric acid/oxygen leaching of first stage leach residue. Part 1: Model development
627
Modelling of an elastomer profile extrusion process using support vector machines (SVM)
628
Modelling of an electric IR heater at transient and steady state conditions: Part I: model and validation
629
Modelling of an electric IR heater at transient and steady state conditions: Part II: modelling a paper dryer
630
Modelling of an environmental parameter by use of the alternating conditional expectation method
631
Modelling of an estuarine eutrophication gradient
632
Modelling of an estuarine eutrophication gradient
633
Modelling of an ethanol-water distillation column with vapour recompression
634
Modelling of an HTPEM-based micro-combined heat and power fuel cell system with methanol
635
Modelling of an IGCC plant with carbon capture for 2020
636
Modelling of an ilmenite-smelting DC arc furnace process
637
Modelling of an improved positive corona thruster and actuator
638
Modelling of an in situ ventilation experiment in the Opalinus Clay
639
Modelling of an indirectly heated fixed bed pyrolysis reactor of wood: Transition from batch to continuous staged gasification
640
Modelling of an interactive system with an agent-based architecture using Petri nets, application of the method to the supervision of a transport system Original Research Article
641
Modelling of an IPC-concrete modular pedestrian bridge
642
Modelling of an IR scintillation counter
643
Modelling of an IR scintillation counter
644
Modelling of an SCR catalytic converter for diesel exhaust after treatment: Dynamic effects at low temperature
645
Modelling of an updraft fixed-bed gasifier operated with softwood pellets
646
Modelling of analytical peaks: Peaks modifications Original Research Article
647
Modelling of angular contact ball bearings and axial displacements for high-speed spindles
648
Modelling of anhydrous milkfat fractionation in an ultrafiltration membrane process
649
Modelling of anisotropic performance fabrics
650
Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes
651
Modelling of annular flow through pipes and T-junctions
652
Modelling of annulus fibrosus imbalance as an aetiological factor in adolescent idiopathic scoliosis
653
Modelling of aqueous solvation of eosin Y at the rutile TiO2(1 1 0)/water interface
654
Modelling of aquifer response to time varying recharge and pumping from multiple basins and wells
655
Modelling of arsenic retention in constructed wetlands
656
Modelling of asymmetric excitons in organic microcavities
657
Modelling of attenuation of Lamb waves using Rayleigh damping: Numerical and experimental studies
658
Modelling of autogenous healing in ultra high performance concrete
659
Modelling of automobile shredder residue recycling in the Japanese legislative context
660
Modelling of auxin transport affected by gravity and differential radial growth
661
Modelling of axial and radial solid segregation in a CFB boiler
662
Modelling of bacterial growth with shifts in temperature using automated methods with Listeria monocytogenes and Pseudomonas aeruginosa as examples
663
Modelling of base flow of the basin of Kolubara river in Serbia
664
Modelling of basin irrigation systems: A review
665
Modelling of batch production systems using Petri nets with dynamic tokens Original Research Article
666
Modelling of Be transport in PSI experiments at PISCES-B
667
Modelling of beef sensory quality for a better prediction of palatability
668
Modelling of beef surface temperatures during steam decontamination
669
Modelling of Belt-Driven High-Speed Laser Beam Manipulator
670
Modelling of bentonite–granite solutes transfer from an in situ full-scale experiment to simulate a deep geological repository (Grimsel Test Site, Switzerland)
671
Modelling of benzene-1,4-dithiol on a Au(1 1 1) surface
672
Modelling of bias errors in fibre-optic gyroscopes with advanced simulation tool
673
Modelling of billet shapes in spray forming using a scanning atomizer
674
Modelling of billet shapes in spray forming using a scanning atomizer
675
Modelling of binder removal from a (fibre+powder) composite pre-form Original Research Article
676
Modelling of Bingham-like fluids with deformable core
677
Modelling of biodiesel fuel droplet heating and evaporation
678
Modelling of biofuel droplets dispersion and evaporation
679
Modelling of biogeochemical processes in fish earth ponds: Model development and calibration
680
Modelling of biogeochemical processes in fish earth ponds: Model development and calibration
681
Modelling of biohydrogen production and recovery by membrane gas separation Original Research Article
682
Modelling of bioleach processes: Connection between science and engineering
683
Modelling of biological fouling propensity by inference in a side stream membrane bioreactor Original Research Article
684
Modelling of biological nitrogen removal from the liquid fraction of pig slurry in a sequencing batch reactor
685
Modelling of biological phenol removal in draw-fill reactors using suspended and attached growth olive pulp bacteria
686
Modelling of biological processes during aerobic treatment of piggery wastewater aiming at process optimisation
687
Modelling of biomass prices for bio-energy market in the Czech Republic
688
Modelling of bituminized radioactive waste leaching. Part I: Constitutive equations
689
Modelling of bituminized radioactive waste leaching. Part II: Experimental validation
690
Modelling of blast-induced damage in tunnels using a hybrid finite-discrete numerical approach
691
Modelling of blast-induced fractures in jointed rock masses
692
Modelling of Block Structure Dynamics for the Vancea Region: Source Mechanisms of the Synthetic Earthquakes
693
Modelling of Block-structure Dynamics: Parametric Study for Vrancea
694
Modelling of bonded multilayered disks subjected to biaxial flexure tests
695
Modelling of Bonded Post-Tensioned Concrete Cantilever Beams under Flexural Loading
696
Modelling of Boron Trapping at End-of-Range defects in pre-amorphized ultra-shallow junctions
697
Modelling of broad band ultraviolet clearness index distributions for Cordoba, Spain
698
Modelling of brown rot prevalence in the Dutch potato production chain over time: from state variable to individual-based models
699
Modelling of bubble-mediated gas transfer: Fundamental principles and a laboratory test
700
Modelling of calcium sulphate solubility in concentrated multi-component sulphate solutions
701
Modelling of carbon and hydrogen oxidation kinetics of a coked ferrierite catalyst
702
Modelling of Carbon Black Loadings Effect on the Heat Capacity of SBR and BR
703
Modelling of carbon cycle and fire regime in an east Siberian larch forest
704
Modelling of carbon cycle and fire regime in an east Siberian larch forest
705
Modelling of Carbon Dioxide Absorption into Aqueous Ammonia Solution in a Wetted Wall Column
706
Modelling of carbon dioxide solubility in ionic liquids at sub and supercritical conditions by neural networks and mathematical regressions
707
Modelling of carbon dust formation by cluster growth in argon plasmas
708
Modelling of carbon transport in fusion devices: evidence of enhanced re-erosion of in-situ re-deposited carbon
709
Modelling of carbon–carbon composite ablation in rocket nozzles
710
Modelling of carbonic anhydrase inhibitory activity of sulfonamides using molecular negentropy
711
Modelling of catalytic monolith converters with low- and high-temperature NOx storage compounds and differentiated washcoat
712
Modelling of catalytically stabilised thermal combustion of chlorinated hydrocarbons
713
Modelling of cation concentrations in the outflow of NaNO3 percolation experiments through Boom Clay cores
714
Modelling of cavitational erosion in the area of surfaces of smooth contact
715
Modelling of cavitational erosion in the area of surfaces of smooth contact
716
Modelling of CCT diagrams for engineering and constructional steels
717
Modelling of Cd, Cu, Ni, Pb and Zn uptake, by winter wheat and forage maize, from a sewage disposal farm
718
Modelling of cells, stacks and systems based around metal-supported planar IT-SOFC cells with CGO electrolytes operating at 500–600 °C
719
Modelling of cement hydration in concrete structures with hybrid finite elements
720
Modelling of cement raw material compositional indices with direct sequential cosimulation
721
Modelling of cement-based systems—the alchemy of cement chemistry
722
Modelling of ceramide interactions with porous graphite carbon in non-aqueous liquid chromatography
723
Modelling of CFRP–concrete bond using smeared and discrete cracks
724
Modelling of CFRP-concrete shear-lap tests
725
Modelling of Changes in Evapotranspiration for an Area in Peninsular Malaysia
726
Modelling of changes in properties of alloys at elevated temperatures
727
Modelling of chaotic time series using a variable-length windowing approach
728
Modelling of charge carriers’ transport and trapping phenomena in one-dimensional structures during thermal stimulation
729
Modelling of chemical fractionation patterns of metals in soils by two-way and three-way principal component analysis Original Research Article
730
Modelling of chemical oxygen demand by using ANNs, ANFIS and k-means clustering techniques
731
Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept
732
Modelling of chloride binding related to hydration products in slag-blended cements
733
Modelling of chloride diffusion into surface-treated concrete
734
Modelling of chloride ingress into concrete from a saline environment
735
Modelling of chloride penetration into non-saturated concrete: Case study application for real marine offshore structures
736
Modelling of chlorine decay in municipal water supplies
737
Modelling of circadian rhythms in Drosophila incorporating the interlocked PER/TIM and VRI/PDP1 feedback loops
738
Modelling of CO2, CO, SO2, O2 and NOx emissions from the oxy-fuel combustion in a circulating fluidized bed
739
Modelling of cohesive crack growth in concrete structures with the extended finite element method Original Research Article
740
Modelling of cohesive sediment dynamics in tidal estuarine systems: Case study of Tagus estuary, Portugal
741
Modelling of cohesive sediment transport in a tidal lagoon—an annual budget
742
Modelling of cointegration in the vector autoregressive model
743
Modelling of cold extrusion with experimental verification
744
Modelling of cold-formed steel sandwich purlin-sheeting systems to estimate the rotational restraint
745
Modelling of coliform removal in 186 facultative and maturation ponds around the world
746
Modelling of colour perception of different age groups using artificial neural networks
747
Modelling of Colour Yield in Polyethylene Terephthalate Dyeing with Statistical and Fuzzy Regression.
748
Modelling of columnar growth in continuum ballistic deposition
749
Modelling of combined cycle power plants using biomass
750
Modelling of combined surface radiation and natural convection in a vented “T” form cavity
751
Modelling of combustion and heat transfer in ‘Swiss roll micro-scale combustors
752
Modelling of combustion and nitrogen oxide formation in hydrogen-fuelled internal combustion engines within a 3D CFD code
753
Modelling of combustion characteristics of high ash coal char particles at high pressure: Shrinking reactive core model
754
Modelling of cometary nuclei: Planetary missions preparation Original Research Article
755
Modelling of competing technologies in the residential sector
756
Modelling of complex liquid–vapour equilibria in the urea synthesis process with the use of artificial neural network
757
Modelling of composite and sandwich plates by a trigonometric layerwise deformation theory and radial basis functions
758
Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact
759
Modelling of composition and phase changes in multiphase alloys due to growth of an oxide layer Original Research Article
760
Modelling of compressible flows with highly oscillating initial data by homogenization Original Research Article
761
Modelling of concrete at early ages: Application to an externally restrained slab
762
Modelling of concrete beams reinforced with FRP re-bars
763
Modelling of conditions for accelerated lifetime testing of Humidity impact on PV-modules based on monitoring of climatic data
764
Modelling of confinement potentials in quantum dots
765
Modelling of connected processes
766
Modelling of conspicuity-related motorcycle accidents in Seremban and Shah Alam, Malaysia
767
Modelling of constrained thin rubber layer with emphasis on damping
768
Modelling of contact and friction in aluminium extrusion
769
Modelling of contact deformation for a pinch gripper in automated material handling
770
Modelling of contaminant transport within a marshland environment
771
Modelling of continuous and discontinuous floating slab tracks in a tunnel using a periodic approach
772
Modelling of continuous casting processes Original Research Article
773
Modelling of continuous steel coating by self-induced ion plating (SIIP)
774
Modelling of continuous steel–concrete composite beams: computational aspects
775
Modelling of control options for an outbreak of Mycoplasma gallisepticum in egg production: A decision support tool
776
Modelling of convective drying of carrot slices with IR heat source
777
Modelling of Conventional and Severe Shot Peening Influence on Properties of High Carbon Steel via Artificial Neural Network
778
Modelling of cooking of wheat to produce bulgur Original Research Article
779
Modelling of copper ion transport through supported liquid membrane containing LIX 984
780
Modelling of copper precipitation in iron during thermal aging and irradiation
781
Modelling of core protection and monitoring system for PWR nuclear power plant simulator
782
Modelling of corona discharge in cylinder-wire-plate electrode configuration
783
Modelling of Correlated Ordinal Responses, by Using Multivariate Skew Probit with Different Types of Variance Covariance Structures
784
Modelling of corrosion fatigue crack growth plateaux for RPV steels in high temperature water Original Research Article
785
Modelling of corrosion-induced cover cracking in reinforced concrete by an embedded cohesive crack finite element
786
MODELLING OF COST OF MECHANICAL ELECTRICAL SERVICES BETWEEN RESIDENTIAL COMMERCIAL BUILDING PROJECTS USING SELECTED BUILDING FORM DESCRIPTORS : A Case Study of Selected Building Projects In Abuja And Niger State, Nigeria
787
Modelling of countercurrent partial condensers for light hydrocarbon streams containing hydrogen
788
Modelling of coupled electron and mass transport in anisotropic proton-exchange membrane fuel cell electrodes
789
Modelling of coupled heat and mass transfer during a contact baking process Original Research Article
790
Modelling of coupled heat and moisture transfer in porous construction materials
791
Modelling of coupling flow and temperature fields in molten pool during twin-roll strip casting process
792
Modelling of cowl performance in building simulation tools using experimental data and computational fluid dynamics
793
Modelling of crack coalescence in 2024-T351 Al alloy friction stir welded joints
794
Modelling of Crack Growth Using a New Fracture Criteria Based Peridynamics
795
Modelling of Crack Propagation in Layered Structures Using Extended Finite Element Method
796
Modelling of crack surface interference under cyclic shear loads
797
Modelling of cracking sites/development in axial dovetail joints of aero-engine compressor discs
798
Modelling of creep damage to estimate remaining life
799
Modelling of creep damage to estimate remaining life
800
Modelling of creep in Inconel 706 turbine disc fir-tree
801
Modelling of creep-fatigue in containers during aluminium and copper extrusion
802
Modelling of crop yields and N2O emissions from silty arable soils with differing tillage in two long-term experiments
803
Modelling of cross-flow membrane contactors: Mass transfer with chemical reactions
804
Modelling of cross-flow membrane contactors: physical mass transfer processes
805
Modelling of cross-ply piezoelectric composite laminates in cylindrical bending with interfacial shear slip
806
Modelling of cross-ply piezoelectric composite laminates in cylindrical bending with interfacial shear slip
807
Modelling of cross-ply piezoelectric composite laminates in cylindrical bending with interfacial shear slip
808
Modelling of Crowd Evacuation with Communication Strategy Using Social Force Model
809
Modelling of crystalline layer growth using kinetic data obtained from suspension crystallization
810
Modelling of Cs sorption in natural mixed-clays and the effects of ion competition
811
Modelling of current loads on aquaculture net cages
812
Modelling of curved interfaces in composite shells
813
Modelling of curved interfaces in composite shells
814
Modelling of cutting forces in ball-end milling with tool–surface inclination: Part I: Predictive force model and experimental validation
815
Modelling of cutting forces in ball-end milling with tool–surface inclination: Part II. Influence of cutting conditions, run-out, ploughing and inclination angle
816
Modelling of cutting forces in helical end milling using a predictive machining theory
817
Modelling of cutting forces in helical end milling using a predictive machining theory
818
Modelling of cutting forces in helical end milling using a predictive machining theory
819
Modelling of cutting tool – soil interaction – part I: contact behaviour
820
Modelling of cutting tool – soil interaction – part II: macromechanical model and upscaling
821
Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations
822
Modelling of cyclopentane promoted gas hydrate systems for carbon dioxide capture processes
823
Modelling of Cylindrical Contact Theories ‎of Hertz and JKR for the Manipulation of ‎Biological Micro/Nanoparticles
824
Modelling of dam behaviour based on neuro-fuzzy identification
825
Modelling of damage and failure in multiphase high strength DP and TRIP steels
826
Modelling of damage and failure of glass/epoxy composite plates subject to impact fatigue
827
Modelling of damage development and failure in notched-bar multiaxial creep tests
828
Modelling of damage development during sintering
829
Modelling of dc and ac responses of a planar mixed conducting oxygen electrode
830
Modelling of DC arc discharge on ice surfaces
831
Modelling of DC drives for power system harmonic analysis
832
Modelling of dead-end microfiltration with pore blocking and cake formation
833
Modelling of defects and amorphisation by ball milling of γ-TiAl
834
Modelling of deformation and microstructural changes in P/M Rene 95 under isothermal forging conditions
835
Modelling of deformation inhomogeneity in the angular accumulative drawing process—multiscale approach
836
Modelling of dendritic solidification in undercooled dilute Ni–Zr melts Original Research Article
837
Modelling of dense gas-particle flow in a circulating fluidized bed by Distinct Cluster Method (DCM)
838
Modelling of dependence between critical failure and preventive maintenance: The repair alert model
839
Modelling of deposit formation and sintering for the co-combustion of coal with biomass
840
Modelling of deposition of hydrocarbon films underneath the divertor and in the pumping ducts of ITER
841
Modelling of deposits formation on heating tubes in pulverized coal boilers
842
Modelling of Dictyostelium discoideum slug migration
843
Modelling of diesel exhaust aerosol during laboratory sampling
844
Modelling of diffuse failure mechanisms of catastrophic landslides Original Research Article
845
Modelling of diffusion from equilibrium diffraction fluctuations in ordered phases
846
Modelling of diffusion-limited growth to predict Listeria distribution in structured model foods Original Research Article
847
Modelling of diffusion-limited retardation of contaminants in hydraulically and lithologically nonuniform media
848
Modelling of dilation of concrete and its effect in triaxial compression
849
Modelling of dilational visco-elasticity of adsorbed layers with multiple kinetic processes
850
Modelling of direct energy requirements in mechanical machining processes
851
Modelling of discrete-time SIS models with awareness interactions on degree-uncorrelated networks
852
Modelling of discretized loss reserving data : 074050 (M40,M31) Hesselager O., University of Copenhagen, Denmark, Astin Colloquium Leuven, 1995
853
Modelling of Disinfection by-products formation via UV irradiation of the water from Tajan River (source water for Sari drinking water, Iran)
854
Modelling of dispersant application to oil spills in shallow coastal waters
855
Modelling of dissolved H in Ga stabilised δ-Pu
856
Modelling of diurnal cycles of brightness temperature extracted from METEOSAT data
857
Modelling of dominant softening mechanisms for Ti-6Al-4V in steady state hot forming conditions
858
Modelling of Drain Current of MOSFET Transistor in Terms of Gate Oxide Thickness
859
Modelling of dripwater hydrology and hydrogeochemistry in a weakly karstified aquifer (Bath, UK): Implications for climate change studies
860
Modelling of dry sliding oxidation-modified wear in two phase materials
861
Modelling of Drying in Packed Bed by Super Heated Steam
862
Modelling of drying kinetics of single apricot Original Research Article
863
Modelling of dual clutch transmission equipped powertrains for shift transient simulations
864
Modelling of dual-frequency capacitive discharges Original Research Article
865
Modelling of ductile fracture initiation in strength mismatched welded joint
866
Modelling of dust lifting using the Lagrangian approach
867
Modelling of dynamic and metadynamic recrystallisation during bar rolling of a medium carbon spring steel
868
Modelling of dynamic behaviour of microstructured thin functionally graded plates
869
Modelling of dynamic behaviour of orthotropic metals including damage and failure
870
Modelling of dynamic damage and failure in aluminium alloys
871
Modelling of dynamic flavour properties with ordinary differential equations
872
MODELLING OF DYNAMIC RESPONSES OF AN AUTOMOTIVE FUEL RAIL SYSTEM, PART I: INJECTOR
873
MODELLING OF DYNAMIC RESPONSES OF AN AUTOMOTIVE FUEL RAIL SYSTEM, PART II: ENTIRE SYSTEM
874
Modelling of dynamical systems with motion dependent discontinuities
875
Modelling of ECM and EDM processes
876
Modelling of effects of ultrastructural morphology on the hygroelastic properties of wood fibres
877
Modelling of effects of water activity and temperature on germination and growth of ochratoxigenic isolates of Aspergillus ochraceus on a green coffee-based medium
878
Modelling of elastic continua using a grillage of structural elements based on discrete element concepts
879
Modelling of elastic interaction stresses in two-phase materials by FEM
880
Modelling of elastic interaction stresses in two-phase materials by FEM
881
Modelling of Elastic Modulus Degradation in Sheet Metal Forming Using Back Propagation Neural Network
882
Modelling of elastoplastic behaviour with non-local damage in concrete under compression
883
Modelling of electrical energy consumption in Delhi
884
Modelling of electrical energy recovery from urban solid waste system: The case of Dhaka city
885
Modelling of electrical properties of Ni-YSZ composites
886
Modelling of electricity generation of large interconnected power systems: How can a CO2 tax influence the European generation mix
887
Modelling of electrification in steady state and transient regimes
888
Modelling of electrokinetically driven mixing flow in microchannels with patterned blocks
889
Modelling of electromagnetic excitation forces of small induction motor for vibration and noise analysis
890
Modelling of electromagnetic wave interactions with the human body
891
Modelling of electromagnetic waves in periodic media with finite elements
892
Modelling of electronic absorption spectrum of Pb(II)–caffeate complex by time-dependent density functional theory
893
Modelling of electronic power transformer and its application to power system
894
Modelling of electronic transport in Quantum Well Infrared Photodetectors
895
Modelling of electro-osmosis in clayey materials including pH effects
896
Modelling of electroreduction of porous oxides in molten salt
897
Modelling of electrostatic fluidized bed (EFB) coating process using artificial neural networks
898
Modelling of electrostatic ignition hazards in industry examples of improvements of hazard assessment and incident investigation
899
Modelling of elution–extrusion counter-current chromatography using perfect replacement approach
900
Modelling of Emission Dispersion Pattern of Nitrogen Oxide (NOx) in Steel Production Unit in Iran by Using Phast Software
901
Modelling of emission of volatile organic compounds from building materials—estimation of gas-phase mass transfer coefficient
902
Modelling of emotional exhaustion role on workplace ostracism: A cross-sectional study on Sepah Bank branches in northern provinces of Iran
903
Modelling of enantioselective and racemic hydrogenation of ethyl pyruvate on a Pt/Al2O3 catalyst in the presence of microwave irradiation
904
Modelling of energy and carbon budgets of wood fuel coppice systems
905
Modelling of energy attenuation due to powder flow-laser beam interaction during laser cladding process
906
Modelling of energy flows in potato crisp frying processes
907
Modelling of energy systems with a high percentage of CHP and wind power
908
Modelling of energy transformations in fertilized tropical fish ponds
909
Modelling of EnFETs for the creatinine detection
910
Modelling of entrainment in industrial flotation cells: the effect of solids suspension
911
Modelling of entrainment in industrial flotation cells: Water recovery and degree of entrainment
912
Modelling of environmental impacts of solid waste landfilling within the life-cycle analysis program EASEWASTE
913
Modelling of environmental phytoremediation in eutrophic river — the case of water hyacinth harvest in Tha-chin River, Thailand
914
Modelling of environmental phytoremediation in eutrophic river — the case of water hyacinth harvest in Tha-chin River, Thailand
915
Modelling of erosion and deposition at limiter surfaces and divertor target plates
916
Modelling of Escherichia coli O157:H7 growth at various storage temperatures on beef treated with electrolyzed oxidizing water Original Research Article
917
Modelling of estuarine response to sea-level rise during the Holocene: Application to the Guadiana Estuary–SW Iberia
918
Modelling of European hake nurseries in the Mediterranean Sea: An ecological niche approach
919
Modelling of evaporation from the reservoir of Yuvacik dam using adaptive neuro-fuzzy inference systems
920
Modelling of evaporation from the reservoir of Yuvacik dam using adaptive neuro-fuzzy inference systems
921
Modelling of evaporation in a sparse millet crop using a two-source model including sensible heat advection within Tthe canopy
922
Modelling of event-based soil erosion in Costa Rica, Nicaragua and Mexico: evaluation of the EUROSEM model
923
Modelling of excess nitrogen in small rural catchments
924
Modelling of exfoliated graphite
925
Modelling of expansion induced by ASR — New approaches
926
Modelling of experimental vanillin hydrodeoxygenation reactions in water/oil emulsions. Effects of mass transport
927
Modelling of experimentally created partial-thickness human skin burns and subsequent therapeutic cooling: A new measure for cooling effectiveness
928
Modelling of explosive cutting process of plates using GMDH-type neural network and singular value decomposition
929
Modelling of Eyeball with Pan/Tilt Mechanism and Intelligent Face Recognition Using Local Binary Pattern Operator
930
Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and flow of pulverized media
931
Modelling of failure of structural textile composites
932
Modelling of far-infrared irradiation in paddy drying process Original Research Article
933
Modelling of fast catastrophic landslides and impulse waves induced by them in fjords, lakes and reservoirs
934
Modelling of fast source transients in PDS-XADS with VARIANT-KIN3D
935
Modelling of fast source transients in PDS-XADS with VARIANT-KIN3D
936
Modelling of fastener flexibility in CFRP strengthened timber-framed walls using modified -method
937
Modelling of fastener flexibility in CFRP strengthened timber-framed walls using modified -method
938
Modelling of fatigue crack growth at the microstructural level
939
Modelling of fatigue damage progression and life of CFRP laminates
940
Modelling of fatigue lifetime under non-proportional multiaxial alternating loading
941
Modelling of fatigue thresholds for small cracks in a mild steel by “Strip-Yield” model
942
Modelling of fatigue-corrosion in Ti6246 alloy at 500°c
943
Modelling of feed distributor at coal washeries
944
Modelling of Fickian diffusion to enhance polymer-modified sensor performance
945
Modelling of film casting manufacturing process longitudinal and transverse stretching
946
Modelling of filtration: from the polarised layer to deposit formation and compaction Original Research Article
947
Modelling of fine-scale turbulence mixing noise
948
Modelling of finite piezoelectric patches: Comparing an approximate power series expansion theory with exact theory
949
Modelling of fission chambers in current mode—Analytical approach
950
Modelling of fission chambers in current mode—Analytical approach
951
Modelling of fission gas release from irradiated UO2 fuel under high-temperature annealing conditions
952
Modelling of flash and stripping phenomena in deaerators for seawater desalination Original Research Article
953
Modelling of flash evaporation II: numerical solutions of the model equations
954
Modelling of flash pyrolysis of a single wood particle
955
Modelling of floating-slab tracks with continuous slabs under oscillating moving loads
956
Modelling of flocculation and transport of cohesive sediment from an on-stream stormwater detention pond
957
Modelling of flocculation using a population balance equation
958
Modelling of flow and concentration patterns in spiral wound membrane modules with ladder-type spacers Original Research Article
959
Modelling of flow and wall behaviour in a mildly stenosed tube
960
Modelling of flow in a wiped film evaporator
961
Modelling of flow in cone crushers
962
Modelling of flow processes of the structured two-phase disperse systems (solid phase–liquid medium)
963
Modelling of flow rate in a photovoltaic-driven roof slate-based solar ventilation air preheating system
964
Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B
965
Modelling of fluid continuum considering 3D surface parameters in hydraulic assemblies
966
Modelling of fluid flow and heat transfer to assess the geothermal potential of a flooded coal mine in Lorraine, France
967
Modelling of fluid flow through short tube orifices under metastable conditions: A new numerical validation approach for evaluating the mass flow rate with refrigerant mixtures (HFC-407C and HFC-410A)
968
Modelling of fluid properties in hydraulic positive displacement machines
969
Modelling of fluidelastic instability in a square inline tube array including the boundary layer effect
970
Modelling of fluidised-bed coal gasifiers: elimination of the combustion product distribution coefficient by considering homogeneous combustion
971
Modelling of fluid–solid mass transfer in packed beds: cases of nonuniform particles and concentration dependent internal diffusivity
972
Modelling of flux decline in crossflow ultrafiltration of macromolecules: comparison between predicted and experimental results Original Research Article
973
Modelling of foam degradation in lost foam casting process
974
Modelling of food and food processes Original Research Article
975
Modelling of food security in Malaysia
976
Modelling of food transportation systems – a review
977
Modelling of force production in skeletal muscle undergoing stretch
978
Modelling of force production in skeletal muscle undergoing stretch
979
Modelling of forces in the human masticatory system with optimization of the angulations of the joint loads
980
Modelling of force–velocity hysteresis in smart fluid dampers
981
Modelling of forest conversion planning with an adaptive simulation-optimization approach and simultaneous consideration of the values of timber, carbon and biodiversity
982
Modelling of formation damage due to mud filtrate invasion in a radial flow system
983
Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network
984
Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures
985
Modelling of fractionation in a molecular evaporator with divided condenser
986
Modelling of fracture behaviour in biomaterials
987
Modelling of fracture phenomena in dried materials
988
Modelling of fracture strength of functionally graded geopolymer
989
Modelling of fracture toughness data in the ductile to brittle transition temperature region by statistical analysis
990
Modelling of free radicals production in a collapsing gas-vapour bubble
991
Modelling of free radicals production in a collapsing gas-vapour bubble
992
Modelling of freeway merging and diverging flow dynamics
993
Modelling of French Emmental cheese water activity during salting and ripening periods Original Research Article
994
Modelling of frequency- and amplitude-dependent material properties of filler-reinforced rubber
995
Modelling of fretting fatigue in a fracture-mechanics framework
996
Modelling of friction and wear for designing cryogenic valves
997
Modelling of Friction Coefficient for Shoes Type LL By Means ofPolynomial Fitting
998
Modelling of friction phenomena in material removal processes
999
Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN)
1000
Modelling of Friction Stir Extrusion using Artificial Neural Network (ANN)