بر اساس عنوان

1
Viability of soilborne spores of glomalean mycorrhizal fungi
2
Viability of soilborne spores of glomalean mycorrhizal fungi
3
Viability of solar or wind for water pumping systems in the Algerian Sahara regions – case study Adrar
4
Viability of some probiotic coatings in bread and its effect on the crust mechanical properties
5
Viability of Split Thickness Autogenous Skin Transplantation in Canine Distal Limb Reconstruction – An Experimental Evaluation
6
Viability of Starter Bacteria and Anti-Oxidative Activity of a Functional Yogurt Containing Silybum marianum Seed Extract
7
Viability of sweet potato flour as carbon source for the production of biofloc in freshwater culture of tilapia, Oreochromis sp.
8
Viability of the ESS-Bilbao neutron source for irradiation of nuclear fusion materials
9
Viability of the etiologic agent of the Lethargic Crab Disease, Exophiala cancerae, during cooking of the mangrove-land crab: Does this traditional dish represent a risk to humans?
10
VIABILITY OF THE EXTENDED TECHNOLOGY ACCEPTANCE MODEL: AN EMPIRICAL STUDY
11
Viability of the separation of Cd from highly concentrated Ni-Cd mixtures by non-dispersive solvent extraction
12
Viability of total phenol index value as quality marker of sparkling wines, “cavas”
13
Viability of ultrasonication of food waste for hydrogen production
14
Viability of using calcined clays, from industrial by-products, as pozzolans of high reactivity
15
Viability of using end-of-life tire pads as under sleeper pads in railway
16
Viability of wind energy as a power generation source in Maiduguri, Borno state, Nigeria
17
Viability screen on pediatric low grade glioma cell lines unveils a novel anti-cancer drug of the steroid biosynthesis inhibitor family
18
Viability studies of human valves prepared for use as allografts,
19
Viability study and mechanical characterisation of copper–graphite electrical contacts produced by adhesive joining
20
Viability study of a FC-battery-SC tramway controlled by equivalent consumption minimization strategy
21
Viability study of cold generation from biomass in an agrarian exploitation
22
Viability study of different reverse osmosis membranes for application in the tertiary treatment of wastes from the tanning industry Original Research Article
23
Viability study of porous silicon photonic mirrors as secondary reflectors for solar concentration systems
24
Viability theory and fuzzy differential equations
25
Viability trade-offs in the evaluation of strategies to manage recreational fishing in a marine park
26
Viability, prognosis, revascularization, and pascal
27
Viability, susceptibility to peroxidation and fatty acid composition of boar semen during liquid storage
28
Viabilityassessment through TZ Test of jatropha curcas seeds, Collected from different Agro Climatic Zones of India
29
Viable and straightforward approach to the preparation of water soluble pyrazol-5-one derivatives through glycoconjugation
30
Viable Arcuate Double-sided Magnetic Gear for Competitive Torque Density Transmission Capability
31
Viable arcuate double-sided magnetic gear for competitive torque density transmission capability
32
Viable Brain with bilateral Internal Carotid Occlusion, A Case Report
33
Viable but nonculturable cells used in biosensor fabrication for long-term storage stability
34
Viable control for uncertain nonlinear dynamical systems described by differential inclusions
35
Viable count estimates of lag time responses for Salmonella typhimurium M48 subjected to abrupt osmotic shifts
36
Viable counts, characteristic evaluation for commercial lactic acid bacteria products
37
Viable energy production and waste recycling from anaerobic digestion of manure and other biomass materials
38
Viable engineering options to enhance the NaCl quality from the Dead Sea in Jordan
39
Viable image analyzing method to characterize the microstructure and the properties of the Ni/YSZ cermet anode of SOFC
40
Viable mass production method for cotton pink bollworm, Pectinophora gossypiella (Saunders)
41
Viable Piglets Generated from Porcine Oocytes Matured In Vitro and Fertilized by Intracytoplasmic Sperm Head Injection
42
Viable prices in financial markets with solvency constraints
43
Viable rabbits derived from oocytes by intracytoplasmic injection of spermatozoa from an infertile male
44
Viable Rat-Mouse Chimeras: Where Do We Go from Here?
45
Viable seed banks under grazing and exclosure conditions in montane mesic grasslands of Argentina
46
Viable self-management: The FUNACOM Housing Programme of the São Paulo Municipality
47
Viable set computation for hybrid systems
48
Viable states for monotone harvest models
49
Viable storage of hydrogen in materials with off-board recharging using high-temperature electrolysis
50
Viable synthesis of a self-assembling regioregular thiophenic copolymer for second-order non-linear optics
51
Viable System Model and Policy Implementation: The Case of MSC-Status Incubators
52
Viable t-b-τ Yukawa unification in SUSY SO(10)
53
Viable t-b-τ Yukawa unification in SUSY SO(10)
54
Viable t-b-τ Yukawa unification in SUSY SO(10)
55
VIADUCT DESIGN FOR MINIMIZATION OF DIRECT AND STRUCTURE-RADIATED TRAIN NOISE
56
Viagra approved in Europe, but UK government tells doctors not to prescribe
57
Viagra: The risks of recreational use
58
Viagraʹs rise above womenʹs health issues: An analysis of the social and political influences on drug approvals in the United States and Japan
59
Vial bodies: conflicting interests in the move to new institutional relationships in biological medicines research and regulation
60
Vial position in the determination of chlorophenols in water by solid phase microextraction
61
Vial-based screening method for assessing pervaporation performance of flat sheet membrane samples
62
Vialinin B, a novel potent inhibitor of TNF-α production, isolated from an edible mushroom, Thelephora vialis
63
VIA-RAD: a blackboard-based system for diagnostic radiology
64
Viba sets up masterbatch distribution centre in Hungary
65
Viba’s masterbatch for plastic film for greenhouses
66
Viba’s masterbatches for synthetic raffia based on polyolefins
67
Vibaʹs masterbatches for polycarbonate plastics
68
Vibational Spectroscopic, Molecular Structure and HOMO, LUMO Studies of Sulfanilamide by Density Functional Method
69
VIBEX: an expert system for vibration fault diagnosis of rotating machinery using decision tree and decision table
70
Vibo Valentia flood and MSG rainfall evaluation
71
Vibracoring: a new method for coring deep lakes
72
Vibrant fault diagnosis for hydroelectric generator units with a new combination of rough sets and support vector machine
73
Vibrating carbon nanotube based bio-sensors
74
Vibrating ferromagnets in a magnetic field
75
Vibrating heart
76
Vibrating high gradient magnetic separation for purification of iron impurities under dry condition
77
Vibrating hydroxide in hydrophobic solution: The ion to keep an eye on
78
Vibrating insoles and balance control in elderly people
79
Vibrating membrane filtration as improved technology for microalgae dewatering
80
Vibrating Orifice Droplet Generator for Studying Fast Processes Associated with Microdroplets
81
Vibrating pervaporation modules: Effect of module design on performance
82
Vibrating polymeric microsieves: Antifouling strategies for microfiltration
83
Vibrating powder beds: a comparison of experimental and Distinct Element Method simulated data
84
Vibrating sample experiments as a probe of anisotropic torque in YBCO single crystals
85
Vibrating sample experiments as a probe of anisotropic torque in YBCO single crystals
86
Vibrating wire apparatus for periodic magnetic structure measurement
87
Vibrating wire apparatus for periodic magnetic structure measurement
88
Vibrating wire field-measuring technique
89
Vibrating wire field-measuring technique
90
Vibrating Wire Measurements in 3He-4He Mixtures in the Ballistic Quasiparticle Regime
91
Vibrating Wire Measurements in Superfluid 3He at the Melting Curve Down to 0.53 mK
92
Vibrating wires for beam diagnostics
93
Vibrating wires for beam diagnostics
94
Vibrating ZnO–CNT nanotubes as pressure/stress sensors
95
Vibrating-wire transducers for electrostatic measurements
96
Vibration absorbers for chatter suppression: A new analytical tuning methodology
97
Vibration absorption in systems with a nonlinear energy sink: Nonlinear damping
98
Vibration amplitude and thermal effects on the nonlinear behavior of thin circular functionally graded plates
99
Vibration amplitude and thermal effects on the nonlinear behavior of thin circular functionally graded plates
100
Vibration amplitude control for a van der Pol–Duffing oscillator with time delay
101
Vibration analyses of a portal frame under the action of a moving distributed mass using moving mass element
102
Vibration analyses of an inclined flat plate subjected to moving loads
103
Vibration analyses of FGM plates with in-plane material inhomogeneity by Ritz method
104
Vibration analyses of the annular plate with electrorheological fluid damping treatment
105
Vibration analysis and bifurcations in the self-sustained electromechanical system with multiple functions
106
Vibration analysis and control of flexible beam by using smart damping structures
107
Vibration analysis and critical speeds of polar orthotropic annular disks in rotation
108
Vibration analysis and design optimization of viscoelastic sandwich cylindrical shell
109
Vibration Analysis and Experimental Research of the Linear-Motor-Driven Water Piston Pump Used in the Naval Ship
110
Vibration analysis and finite element modeling for determining shear modulus of pultruded hybrid composites
111
Vibration analysis and measurement for piezoceramic rectangular plates in resonance
112
Vibration analysis and measurement of a gradient coil insert in a 4 T MRI
113
Vibration analysis and optimal control of rotating pre-twisted thin-walled beams using MFC actuators and sensors
114
Vibration Analysis and Sensitivity Analysis of Semi-Submerged Multilayer Piezoelectric Microcantilever
115
Vibration analysis and testing of a thin-walled gradient coil model
116
VIBRATION ANALYSIS BY DISCRETE SINGULAR CONVOLUTION
117
Vibration analysis diagnostics by continuous-time models: A case study
118
Vibration analysis diagnostics by continuous-time models: A case study
119
Vibration analysis for a coupled beam-sdof system by using the recurrence equation method
120
Vibration analysis for detecting failure of compressor blade
121
Vibration analysis for diagnostic testing of circuit-breakers
122
Vibration analysis for electronic equipment [3rd ed.] [Book Review]
123
VIBRATION ANALYSIS FOR FRAME STRUCTURES USING TRANSFER OF DYNAMIC STIFFNESS COEFFICIENT
124
Vibration analysis for piezoceramic ring
125
Vibration Analysis for Rectangular Plate Having a Circular Central Hole with Point Support by Rayleigh-Ritz Method
126
Vibration analysis for the determination of modal parameters of steel catenary risers based on response-only data
127
Vibration analysis in high speed rough and finish milling hardened steel
128
Vibration analysis in JT-60SU design
129
Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism
130
Vibration Analysis of 2-PR(Pa)U- 2-PR(Pa)R New Parallel Mechanism
131
Vibration analysis of 3-D composite beam elements including warping and shear deformation effects
132
Vibration analysis of a beam with an internal hinge subjected to a random moving oscillator
133
Vibration analysis of a beam with embedded shape memory alloy wires
134
Vibration analysis of a beam with partially distributed internal viscous damping
135
Vibration analysis of a beam with partially distributed internal viscous damping
136
Vibration analysis of a beam with PCLD Patch
137
Vibration analysis of a circular arch with variable cross-section using differential transformation and generalized differential quadrature
138
Vibration analysis of a circular plate in interaction with an acoustic cavity leading to extraction of structural modal parameters
139
Vibration Analysis of A Composite Beam with Non-Ideal Boundary Conditions
140
Vibration analysis of a continuous system subject to generic forms of actuation forces and sensing devices
141
Vibration analysis of a cracked rotating tapered beam using the p-version finite element method
142
VIBRATION ANALYSIS OF A DAMPED ARCH USING AN ITERATIVE LAMINATE MODEL
143
Vibration analysis of a diesel engine using biodiesel and petrodiesel fuel blends
144
Vibration analysis of a double layer microshell utilizing a modified couple stress theory
145
Vibration analysis of a ferromagnetic plate subjected to an inclined magnetic field
146
Vibration analysis of a ferromagnetic plate subjected to an inclined magnetic field
147
VIBRATION ANALYSIS OF A FLAT PLATE UNDER AERODYNAMIC LOADING
148
Vibration analysis of a flexible rotating disk with angular misalignment
149
Vibration analysis of a functionally graded beam under a moving mass by using different beam theories
150
Vibration analysis of a high-speed spindle under the action of a moving mass
151
Vibration Analysis of a Hybrid Levitation Pod with Compressor Unbalanced Force in Hyperloop System
152
Vibration Analysis of a Magneto Thermo Electrical Nano Fiber Reinforced with Graphene Oxide Powder Under Refined Beam Model
153
Vibration analysis of a magneto-elastic beam with general boundary conditions subjected to axial load and external force
154
Vibration analysis of a Mindlin elastic plate under a moving mass excitation by eigenfunction expansion method
155
Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method
156
Vibration analysis of a new curved beam element
157
Vibration Analysis of a Nonlinear Beam Under Axial Force by Homotopy Analysis Method
158
Vibration Analysis of a Nonlinear System with a Nonlinear Absorber under the Primary and Super-harmonic Resonances
159
Vibration analysis of a partially treated multi-layer beam with magnetorheological fluid
160
Vibration analysis of a piezoelectric composite plate with cracks
161
Vibration Analysis of a Rectangular Composite Plate in Contact with Fluid
162
Vibration analysis of a rectangular thin isotropic plate with a part-through surface crack of arbitrary orientation and position
163
Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method
164
Vibration Analysis of a Rotating Nanoplate Using Nonlocal Elasticity Theory
165
Vibration analysis of a rotating system due to the effect of ball bearing waviness
166
VIBRATION ANALYSIS OF A ROTATING TIMOSHENKO BEAM
167
Vibration analysis of a rotating truncated circular conical shell
168
Vibration analysis of a single microtubule surrounded by cytoplasm
169
Vibration analysis of a single-walled carbon nanotube under action of a moving harmonic load based on nonlocal elasticity theory
170
Vibration analysis of a stepped laminated composite Timoshenko beam
171
VIBRATION ANALYSIS OF A TAPERED BAR BY DIFFERENTIAL TRANSFORMATION
172
Vibration analysis of a thin circular plate influenced by liquid/gas interaction in a cylindrical cavity
173
VIBRATION ANALYSIS OF A THIN-PLATE BOX USING A FINITE ELEMENT MODEL WHICH ACCOMMODATES ONLY IN-PLANE MOTION
174
Vibration analysis of a Timoshenko non-uniform nanobeam based on nonlocal theory: An analytical solution
175
Vibration analysis of a torus–cylinder shell assembly
176
Vibration analysis of a viscous-fluid-conveying single-walled carbon nanotube embedded in an elastic medium
177
Vibration Analysis of Aeroengine Blisk Structure Based on a Prestressed CMS Super-Element Method
178
Vibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study
179
Vibration Analysis of an Imperfect Single-Layer Graphene Sheet using Quasi-3d Theory and Isogeometric Approach
180
Vibration analysis of an inhomogeneous string for damage detection by wavelet transform
181
Vibration analysis of an inhomogeneous string for damage detection by wavelet transform
182
Vibration analysis of an inhomogeneous string for damage detection by wavelet transform
183
Vibration Analysis of an Initially Pre-Stressed Rotating Carbon Nanotube Employing Differential Transform Method
184
VIBRATION ANALYSIS OF ANISOTROPIC OPEN CYLINDRICAL SHELLS SUBJECTED TO A FLOWING FLUID
185
VIBRATION ANALYSIS OF ANNULAR PLATES USING MODE SUBTRACTION METHOD
186
Vibration analysis of annular-like plates
187
Vibration analysis of arbitrarily shaped membranes using local radial basis function-based differential quadrature method
188
VIBRATION ANALYSIS OF ASYMMETRIC SHEAR WALL- FRAME STRUCTURES USING THE TRANSFER MATRIX METHOD
189
VIBRATION ANALYSIS OF ASYMMETRIC SHEAR WALL STRUCTURES USING THE RANSFER MATRIX METHOD
190
Vibration analysis of automobile tire due to bump impact
191
Vibration analysis of ball bearings with a localized defect applying piecewise response function
192
Vibration analysis of base structure on SINS using PZT actuators
193
VIBRATION ANALYSIS OF BEAMS USING THE GENERALIZED DIFFERENTIAL QUADRATURE RULE AND DOMAIN DECOMPOSITION
194
Vibration analysis of beams with a two degree-of-freedom spring-mass system
195
VIBRATION ANALYSIS OF BEAMS WITH GENERAL BOUNDARY CONDITIONS TRAVERSED BY A MOVING FORCE
196
Vibration analysis of beams with non-local foundations using the finite element method
197
Vibration analysis of beams with open and breathing cracks subjected to moving masses
198
Vibration analysis of bimodulus laminated cylindrical panels
199
Vibration analysis of buckled thin-walled beams with open sections
200
Vibration Analysis of Carotid Arteries Conveying Non-Newtonian Blood Flow Surrounding by Tissues
201
Vibration analysis of circular and square single-layered graphene sheets: An accurate spring mass model
202
Vibration Analysis of Circular Magneto-electro-elastic Nano-plates based on Eringen’s Nonlocal Theory
203
Vibration Analysis of Circular Single-Layer Graphene Sheet Using Finite Element Method
204
Vibration analysis of composite sandwich beams with viscoelastic core by using differential transform method
205
VIBRATION ANALYSIS OF CONSTANT POWER REGULATED SWASH PLATE AXIAL PISTON PUMPS
206
Vibration analysis of corrugated Reissner–Mindlin plates using a mesh-free Galerkin method
207
Vibration analysis of corrugated Reissner–Mindlin plates using a mesh-free Galerkin method
208
Vibration Analysis of Coupled Double- Nanocomposite Microplate-systems
209
Vibration analysis of cracked rotor sliding bearing system with rotor–stator rubbing by harmonic wavelet transform
210
Vibration analysis of cross-ply laminated beams with general boundary conditions by Ritz method
211
Vibration analysis of cross-ply laminated beams with general boundary conditions by Ritz method
212
Vibration analysis of cross-ply laminated beams with general boundary conditions by Ritz method
213
Vibration analysis of cross-ply laminated composite cylindrical shells using the wave propagation approach
214
Vibration analysis of cross-ply laminated square plates with general boundary conditions
215
Vibration analysis of cross-ply laminated square plates with general boundary conditions
216
Vibration analysis of cryocoolers Original Research Article
217
Vibration analysis of delaminated composite beams and plates using a higher-order finite element
218
Vibration analysis of delaminated composite beams and plates using a higher-order finite element
219
Vibration analysis of delaminated composite beams and plates using a higher-order finite element
220
Vibration analysis of delaminated Timoshenko beams under the motion of a constant amplitude point force traveling with uniform velocity
221
Vibration analysis of delaminated Timoshenko beams under the motion of a constant amplitude point force traveling with uniform velocity
222
Vibration Analysis of Different Types of Porous FG Circular Sandwich Plates
223
Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings
224
Vibration analysis of distributed-lumped rotor systems Original Research Article
225
Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil
226
Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals
227
Vibration analysis of double wall carbon nanotube based resonators for zeptogram level mass recognition
228
Vibration analysis of doubly asymmetric, three-dimensional structures comprising wall and frame assemblies with variable cross-section
229
Vibration analysis of drillstrings with self-excited stick–slip oscillations
230
Vibration analysis of edge-cracked beam on elastic foundation with axial loading using the differential quadrature method Original Research Article
231
Vibration analysis of elastically restrained double-walled carbon nanotubes on elastic foundation subjected to axial load using nonlocal shear deformable beam theories
232
Vibration analysis of elastically restrained double-walled carbon nanotubes on elastic foundation subjected to axial load using nonlocal shear deformable beam theories
233
VIBRATION ANALYSIS OF ELASTICALLY SUPPORTED TURBOMACHINERY BLADES BY THE MODIFIED DIFFERENTIAL QUADRATURE METHOD
234
Vibration analysis of femur bone using Elmer
235
Vibration Analysis of FG Micro-Beam Based on the Third Order Shear De-formation and Modified Couple Stress Theories
236
Vibration Analysis of FG Nanoplate Based on Third-Order Shear Deformation Theory (TSDT) and Nonlocal Elasticity
237
Vibration Analysis of FGM Cylindrical Shells Under Various Boundary Conditions
238
Vibration analysis of FGM rings using a newly designed cylindrical superelement
239
Vibration analysis of flexural-shear plates with varying cross-section
240
Vibration analysis of fluid-conveying nanotubes with consideration of surface effects
241
Vibration analysis of fluid-conveying nanotubes with consideration of surface effects
242
Vibration analysis of fluid-conveying nanotubes with consideration of surface effects
243
Vibration analysis of footbridges due to vertical human loads
244
Vibration analysis of fractional viscoelastic CNTs conveying fluid resting on fractional viscoelastic foundation considering nonlocal effects
245
Vibration analysis of fully clamped arbitrarily laminated plate
246
Vibration analysis of functionally graded annular plates with mixed boundary conditions in thermal environment
247
Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges
248
Vibration analysis of functionally graded cylindrical shells with different boundary conditions subjected to thermal loads
249
Vibration analysis of functionally graded rectangular plates resting on elastic foundation using higher-order shear and normal deformable plate theory
250
VIBRATION ANALYSIS OF FUNCTIONALLY GRADED SANDWICH BEAM WITH VARIABLE CROSS-SECTION
251
Vibration Analysis of Functionally Graded Spinning Cylindrical Shells Using Higher Order Shear Deformation Theory
252
Vibration analysis of functionally graded thin-walled rotating blades under high temperature supersonic flow using the differential quadrature method
253
Vibration analysis of generally laminated composite plates by the moving least squares differential quadrature method
254
Vibration analysis of geometrically nonlinear spinning beams
255
Vibration Analysis of Global Near-regular Mechanical Systems
256
Vibration analysis of harmonically excited non-linear system using the method of multiple scales
257
Vibration analysis of horizontal self-weighted beams and cables with bending stiffness subjected to thermal loads
258
VIBRATION ANALYSIS OF HYPOID TRANSMISSIONS APPLYING AN EXACT GEOMETRY-BASED GEAR MESH THEORY
259
Vibration analysis of Kirchhoff plates by the Morley element method
260
Vibration analysis of laminated composite cylindrical panels via a meshfree approach
261
Vibration Analysis of Laminated Composite Plates Carrying Rotating Circular Mass
262
Vibration analysis of laminated cross-ply oval cylindrical shells
263
Vibration analysis of laminated cylindrical thin panels with twist and curvature
264
Vibration analysis of layered curved arch
265
Vibration analysis of linear coupled thermoviscoelastic thin plates by a variational approach
266
Vibration analysis of liquid-filled pipelines with elastic constraints
267
Vibration analysis of long cylindrical shells using acoustical excitation
268
Vibration Analysis of Magneto-Electro-Elastic Timoshenko Micro Beam Using Surface Stress Effect and Modified Strain Gradient Theory under Moving Nano-Particle
269
Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model
270
Vibration analysis of medical devices with a calibrated FEA model
271
Vibration analysis of micro-machined beam-type resonators
272
Vibration analysis of microscale plates based on modified couple stress theory
273
Vibration analysis of micro-scaled sector shaped graphene surrounded by an elastic matrix
274
Vibration analysis of multi-delaminated beams
275
Vibration analysis of multiple-cracked non-uniform beams
276
Vibration analysis of multiple-stepped beams with the composite element model
277
Vibration Analysis of Multi-Step Bernoulli-Euler and Timoshenko Beams Carrying Concentrated Masses
278
Vibration analysis of multi-supported curved panel using the periodic structure approach
279
Vibration analysis of multi-supported curved panel using the periodic structure approach
280
Vibration analysis of multi-supported curved panel using the periodic structure approach
281
Vibration analysis of multi-walled carbon nanotubes using a spring–mass based finite element model
282
Vibration analysis of nanorings using nonlocal continuum mechanics and shear deformable ring theory
283
Vibration analysis of new Galata Bridge—experimental and numerical results
284
VIBRATION ANALYSIS OF NON-CIRCULAR CURVED PANELS BY THE DIFFERENTIAL QUADRATURE METHOD
285
Vibration analysis of non-homogeneous circular plate of nonlinear thickness variation by differential quadrature method
286
Vibration analysis of nonhomogeneous moderately thick plates with point supports resting on Pasternak elastic foundation using element free Galerkin method
287
Vibration analysis of non-uniform beams having multiple edge cracks along the beamʹs height
288
Vibration analysis of non-uniform beams having multiple edge cracks along the beamʹs height
289
Vibration analysis of non-uniform Timoshenko beams coupled with flexible attachments and multiple discontinuities
290
Vibration analysis of O–H stretching mode in Mg(OH)2, Ca(OH)2, LiOH, and NaOH by plane-wave pseudopotential DFT calculation
291
Vibration analysis of one-dimensional structures using the spectral transfer matrix method
292
Vibration analysis of orthotropic graphene sheets embedded in Pasternak elastic medium using nonlocal elasticity theory and differential quadrature method
293
Vibration analysis of orthotropic graphene sheets using nonlocal elasticity theory and differential quadrature method
294
Vibration analysis of orthotropic rectangular plates on elastic foundations
295
Vibration analysis of orthotropic rectangular plates using superelements Original Research Article
296
Vibration Analysis of Orthotropic Triangular Nanoplates Using Nonlocal Elasticity Theory and Galerkin Method
297
Vibration Analysis of Partially Damaged Rotor Bar in Induction Motor under Different Load Condition Using DWT
298
Vibration analysis of piecewise straight thin-walled box beams without using artificial joint springs
299
Vibration analysis of piezoelectric FGM sensors using an accurate method
300
Vibration analysis of piezoelectric FGM sensors using an accurate method
301
Vibration analysis of piezoelectric graphene platelets micro-plates
302
Vibration analysis of piezoelectric laminated slightly curved beams using distributed transfer function method
303
Vibration analysis of piezoelectric nanowires using the finite element method
304
Vibration analysis of piezoelectric nanowires with surface and small scale effects
305
Vibration analysis of pipelines with arbitrary branches by absorbing transfer matrix method
306
Vibration analysis of pipes conveying fluid by transfer matrix method
307
Vibration analysis of planar serial-frame structures
308
Vibration analysis of plane elasticity problems by the -continuous time stepping finite element method
309
VIBRATION ANALYSIS OF PLATES WITH CURVILINEAR QUADRILATERAL PLANFORMS BY DQM USING BLENDING FUNCTIONS
310
Vibration Analysis of Plates With Spot Welded Stiffeners
311
Vibration analysis of pre-stressed pressure sensors using finite element method
312
Vibration analysis of pultruded FRP frames with semi-rigid connections
313
Vibration analysis of PWR fuel rod
314
Vibration analysis of radially FGM sectorial plates of variable thickness on elastic foundations
315
Vibration analysis of rail grinding using a twin-wheel grinder
316
VIBRATION ANALYSIS OF RAILWAY TRACK WITH MULTIPLE WHEELS ON THE RAIL
317
Vibration analysis of rectangular composite laminated plates using layerwise B-spline finite strip method
318
Vibration Analysis of Rectangular Kirchhoff Nano-Plate using Modified Couple Stress Theory and Navier Solution Method
319
Vibration analysis of rectangular Mindlin plates with internal line supports using static Timoshenko beam functions
320
Vibration analysis of rectangular Mindlin plates with internal line supports using static Timoshenko beam functions
321
Vibration analysis of rectangular Mindlin plates with internal line supports using static Timoshenko beam functions
322
Vibration analysis of rectangular plates with edge V-notches
323
Vibration analysis of rectangular plates with edge V-notches
324
Vibration analysis of rectangular plates with general elastic boundary supports
325
Vibration analysis of rectangular plates with side cracks via the Ritz method
326
Vibration analysis of regular structures by graph products: Cable networks
327
Vibration analysis of ring-stiffened conical–cylindrical–spherical shells based on a modified variational approach
328
Vibration analysis of ring-stiffened conical–cylindrical–spherical shells based on a modified variational approach
329
Vibration analysis of ring-stiffened cross-ply laminated cylindrical shells
330
Vibration Analysis of Rotary Tapered Axially Functionally Graded Timoshenko Nanobeam in Thermal Environment
331
Vibration analysis of rotating 3D beams by the p-version finite element method
332
Vibration analysis of rotating composite shafts containing randomly oriented reinforcements
333
Vibration Analysis of Rotating Disk Carrying Annular Concentrated Masses in Turbo-pump System
334
Vibration analysis of rotating pre-twisted blades
335
VIBRATION ANALYSIS OF ROTATING PRE-TWISTED BLADES WITH A CONCENTRATED MASS
336
Vibration analysis of rotating twisted and open conical shells
337
VIBRATION ANALYSIS OF ROTOR BLADES OF A FARM WIND-POWER PLANT
338
Vibration Analysis of Sandwich Plates with Hybrid Composite Cores Combining Porous Polymer and Foam Structures
339
Vibration Analysis of Shear Deformable Cylindrical Shells Made ‎of Heterogeneous Anisotropic Material with Clamped Edges
340
Vibration analysis of shear deformable shallow shells using the Boundary Element Method
341
Vibration analysis of shell-and-tube heat exchangers: an overview—Part 1: flow, damping, fluidelastic instability
342
Vibration analysis of shell-and-tube heat exchangers: an overview—Part 2: vibration response, fretting-wear, guidelines
343
Vibration analysis of simply supported beams with enhanced self-sensing active constrained layer damping treatments
344
Vibration analysis of simply supported plates of general shape with internal point and line supports using the Galerkin method
345
Vibration analysis of simply supported rectangular plates with unidirectionally, arbitrarily varying thickness
346
VIBRATION ANALYSIS OF SIZE-DEPENDENT NANOBEAMS BASED ON NONLOCAL TIMOSHENKO BEAM THEORY
347
Vibration Analysis of Size-Dependent Piezoelectric Nanobeam Under Magneto-Electrical Field
348
VIBRATION ANALYSIS OF SKEW FIBRE-REINFORCED COMPOSITE LAMINATED PLATES
349
Vibration analysis of spinning cylindrical shells by finite element method
350
Vibration analysis of stepping piezoelectric micro-motor using wiggle mode
351
Vibration analysis of structural elements using differential quadrature method
352
Vibration analysis of stylus instrument for random surface measurement
353
Vibration analysis of symmetrically laminated plates based on FSDT using the moving least squares differential quadrature method Original Research Article
354
Vibration analysis of symmetrically laminated rectangular plates with intermediate line supports
355
Vibration analysis of tapered composite beams using a higher-order finite element. Part I: Formulation
356
Vibration analysis of tapered composite beams using a higher-order finite element. Part II: parametric study
357
VIBRATION ANALYSIS OF THE CONTINUOUS BEAM SUBJECTED TO A MOVING MASS
358
Vibration analysis of the excavator model in GRAFSIM program on the basis of a block diagram method
359
Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC)
360
Vibration analysis of the maglev guideway with the moving load
361
Vibration analysis of the pressure vessel internals of WWER-1000 type reactors with consideration of fluid–structure interaction
362
Vibration Analysis of the Sandwich Beam with Electro-Rheological Fluid Core Embedded Within Two FG Nanocomposite Faces Resting on Pasternak Foundation
363
Vibration analysis of the Second Saikai Bridge—a concrete filled tubular (CFT) arch bridge
364
Vibration analysis of the tension shadow mask with wire impact damping
365
VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS USING WAVE PROPAGATION APPROACH
366
Vibration analysis of thin-walled composite beams with I-shaped cross-sections
367
VIBRATION ANALYSIS OF TWISTED CANTILEVERED CONICAL COMPOSITE SHELLS
368
Vibration analysis of twisted plates using first order shear deformation theory
369
VIBRATION ANALYSIS OF TWO BUILDINGS LINKED BY MAXWELL MODEL-DEFINED FLUID DAMPERS
370
Vibration analysis of vector piezoresponse force microscopy with coupled flexural-longitudinal and lateral-torsional motions
371
Vibration Analysis of Vessels Conveying Blood Flow Embedded in Viscous Fluid
372
Vibration analysis of viscoelastic orthotropic nanoplates resting on viscoelastic medium
373
Vibration analysis of waffle floors
374
VIBRATION ANALYSIS OF WIRE AND FREQUENCY RESPONSE IN THE MODERN WIRESAW MANUFACTURING PROCESS
375
Vibration analysis on a thin plate with the aid of computation of normal forms
376
Vibration analysis on multi-mesh gear-trains under combined deterministic and random excitations
377
Vibration analysis software based on a matrix hybrid graph transformation into a structure of a block diagram method
378
Vibration analysis with lifting scheme and generalized cross validation in fault diagnosis of water hydraulic system
379
Vibration analysis with second-order effects of pultruded FRP frames using locking-free elements
380
Vibration and acoustic response of a composite plate with inherent material damping in a thermal environment
381
Vibration and acoustic response of damped sandwich plates immersed in a light or heavy fluid
382
Vibration and aeroelastic properties of ordered and disordered two-span panels in supersonic airflow
383
Vibration and bending of antisymmetrically angle-ply laminated plates with perfectly and weakly bonded layers
384
Vibration and Bifurcation Analysis of a Nonlinear Damped Mass Grounded System
385
Vibration and buckling analysis of functionally graded beams using reproducing kernel particle method
386
Vibration and Buckling Analysis of Functionally Graded Flexoelectric Smart Beam
387
Vibration and buckling analysis of rectangular plates with nonlinear elastic end restraints against rotation Pages 2291-2301
388
Vibration and Buckling Analysis of Skew Sandwich Plate using Radial Basis Collocation Method
389
Vibration and buckling analysis of two-layered functionally graded cylindrical shell, considering the effects of transverse shear and rotary inertia
390
Vibration and buckling characteristics of weld-bonded rectangular plates using the flexibility function approach
391
Vibration and buckling characteristics of weld-bonded rectangular plates using the flexibility function approach
392
Vibration and buckling of a double-beam system under compressive axial loading
393
Vibration and buckling of composite beams using refined shear deformation theory
394
Vibration and buckling of composite beams using refined shear deformation theory
395
VIBRATION AND BUCKLING OF COMPOSITE THIN-WALLED BEAMS WITH SHEAR DEFORMABILITY
396
Vibration and buckling of cross-ply laminated composite circular cylindrical shells according to a global higher-order theory
397
Vibration and buckling of cross-ply laminated composite circular cylindrical shells according to a global higher-order theory
398
Vibration and buckling of flat free–free plates under non-uniform in-plane thermal stresses
399
Vibration and buckling of laminated sandwich plates having interfacial imperfections
400
VIBRATION AND BUCKLING OF MULTILAYERED COMPOSITE BEAMS ACCORDING TO HIGHER ORDER DEFORMATION THEORIES
401
Vibration and buckling of prismatic plate structures having intermediate supports and step thickness changes Original Research Article
402
Vibration and casting surface finish
403
Vibration and chaos control of non-linear torsional vibrating systems
404
Vibration and Critical Speed of Axially loaded Rotating Orthotropic Cylindrical Shells
405
Vibration and critical speeds of composite-ring disks for data storage
406
Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transform
407
Vibration and damage detection in undamaged and cracked circular arches: Experimental and analytical results
408
Vibration and damping analysis of a composite blade
409
Vibration and Damping Analysis of a Multilayered Composite Plate with a Viscoelastic Midlayer
410
Vibration and damping analysis of a three-layered composite annular plate with a viscoelastic mid-layer
411
Vibration and damping analysis of annular plates with constrained damping layer treatments
412
Vibration and damping analysis of composite plates using finite elements with layerwise in-plane displacements
413
Vibration and damping analysis of multilayered fluid filled cylindrical shells with constrained viscoelastic damping using modal strain energy method
414
Vibration and damping analysis of orthotropic cylindrical shells with electrorheological core layer
415
Vibration and damping behaviour of multi-layered composite cylindrical shells
416
Vibration and damping characteristics of beams with active constrained layer treatments under parametric variations
417
Vibration and damping characteristics of hybrid carbon fiber composite pyramidal truss sandwich panels with viscoelastic layers
418
Vibration and Damping in Three-Bar Tensegrity Structure
419
Vibration and damping of composite sandwich box column with viscoelastic/electrorheological fluid core and performance comparison
420
Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions
421
Vibration and dynamic buckling of shear beam-columns on elastic foundation under moving harmonic loads
422
Vibration and dynamic instability of ferromagnetic thin plates in magnetic fields
423
Vibration and dynamic response of functionally graded plates with piezoelectric actuators in thermal environments
424
Vibration and dynamic stability of a traveling sandwich beam
425
Vibration and guiding of moving media with edge weave imperfections
426
Vibration and instability analysis of carbon nanotubes conveying fluid and resting on a linear viscoelastic Winkler foundation
427
Vibration and instability analysis of tubular nano- and micro-beams conveying fluid using nonlocal elastic theory
428
Vibration and instability of a single-walled carbon nanotube in a three-dimensional magnetic field Original Research Article
429
Vibration and instability of carbon nanotubes conveying fluid
430
Vibration and instability of functionally graded circular cylindrical spinning thin-walled beams
431
Vibration and length-dependent flexural rigidity of protein microtubules using higher order shear deformation theory
432
Vibration and Noise Reduction Optimization Design of Mine Chute with Foam Aluminum Laminated Structure
433
Vibration and optimum design of rotating laminated blades
434
Vibration and photoelectron spectroscopies of iodine-doped poly(p-diethynylbenzene)
435
Vibration and Position Tracking Control of Piezoceramic-Based Smart Structures Via QFT
436
Vibration and Position Tracking Control of Piezoceramic-Based Smart Structures Via QFT
437
Vibration and pressure fluctuation in a flexible hydraulic power system on an aircraft
438
Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder
439
Vibration and reliability of a rotating beam with random properties under random excitation
440
Vibration and reliability of a rotating beam with random properties under random excitation
441
Vibration and sound of an elastic wing actuated at its leading edge
442
Vibration and sound radiation of sandwich beams with honeycomb truss core
443
Vibration and sound radiation of viscoelastically supported Mindlin plates
444
Vibration and spinal lengthening in simulated vehicle driving
445
Vibration and Stability Analysis of a Pasternak Bonded Double-GNR-System Based on Different Nonlocal Theories
446
VIBRATION AND STABILITY ANALYSIS OF CANTILEVERED TWO-PIPE SYSTEMS CONVEYING DIFFERENT FLUIDS
447
Vibration and Stability Analysis of Composite Tube Conveying Fluid Flow Equipped with Piezoelectric Ring
448
VIBRATION AND STABILITY ANALYSIS OF NON-UNIFORM TIMOSHENKO BEAMS UNDER AXIAL AND DISTRIBUTED TANGENTIAL LOADS
449
VIBRATION AND STABILITY CONTROL OF SMART COMPOSITE ROTATING SHAFT VIA STRUCTURAL TAILORING AND PIEZOELECTRIC STRAIN ACTUATION
450
Vibration and stability of a constrained elastica with variable length
451
Vibration and stability of a cracked shaft simultaneously subjected to a follower force with an axial force
452
VIBRATION AND STABILITY OF A CRACKED TRANSLATING BEAM
453
VIBRATION AND STABILITY OF A NON-PRISMATIC COLUMN COMPRESSED BY NON-CONSERVATIVE FORCES IN NON-LINEAR CREEP CONDITIONS
454
Vibration and stability of an axially moving beam immersed in fluid
455
Vibration and stability of an axially moving viscoelastic beam with hybrid supports
456
Vibration and stability of an Euler–Bernoulli beam with up to three-step changes in cross-section and in axial force
457
Vibration and stability of an Euler–Bernoulli beam with up to three-step changes in cross-section and in axial force
458
Vibration and stability of an Euler–Bernoulli beam with up to three-step changes in cross-section and in axial force
459
Vibration and stability of angle-ply laminated composite plates subjected to in-plane stresses
460
Vibration and stability of angle-ply laminated composite plates subjected to in-plane stresses
461
Vibration and stability of angle-ply laminated composite plates subjected to in-plane stresses
462
VIBRATION AND STABILITY OF ANNULAR PLATES IN NON-LINEAR CREEP CONDITIONS
463
Vibration and stability of axial loaded beams on elastic foundation under moving harmonic loads
464
Vibration and stability of cracked hollow-sectional beams
465
Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory
466
Vibration and stability of cross-ply laminated composite shallow shells subjected to in-plane stresses
467
Vibration and stability of non-uniform beams with abrupt changes of cross-section by using C1 modified beam vibration functions
468
VIBRATION AND STABILITY OF PRETWISTED SPINNING THIN-WALLED COMPOSITE BEAMS FEATURING BENDING–BENDING ELASTIC COUPLING
469
Vibration and stability of ring-stiffened Euler–Bernoulli tie-bars
470
Vibration and stability of ring-stiffened thin-walled cylindrical shells conveying fluid
471
VIBRATION AND STABILITY OF ROTATING POLAR ORTHOTROPIC ANNULAR DISKS SUBJECTED TO A STATIONARY CONCENTRATED TRANSVERSE LOAD
472
Vibration and stability of rotating polar orthotropic sandwich annular plates with a viscoelastic core layer
473
Vibration and Stability of Thick Plates on Elastic Foundations
474
Vibration and stability of vertical upward-fluid-conveying pipe immersed in rigid cylindrical channel
475
Vibration and Static Analysis of Functionally Graded Porous Plates
476
Vibration and thermal buckling of composite sandwich beams with viscoelastic core
477
Vibration and transient response of structural–acoustic interior coupled systems with dissipative interface Original Research Article
478
Vibration and X-ray photoelectron spectroscopies of FeCl3-doped poly(p-diethynylbenzene)
479
VIBRATION AS AN OCCUPATIONAL HAZARD IN THE WORK ENVIRONMENT OF LATVIA
480
Vibration assisted nano mechanical machining using AFM probe
481
Vibration attenuation by means of piezoelectric transducer shunted to synthetic negative capacitance
482
Vibration attenuation of a cylindrical shell with constrained layer damping strips treatment
483
Vibration Attenuation of Nonlinear Hysteretic Structures with Fully Unknown Parameters
484
Vibration attenuation properties of periodic rubber concrete panels
485
Vibration Attenuation Timoshenko Beam Based on Optimal Placement Sensors/ Actuators PZT Patches with LQR-MOPSO The main objective of
486
VIBRATION ATTENUATION VIA CONSTRAINED LAYER DAMPING AND DASHPOT ON A SPRING–MASS–PLATE SYSTEM
487
Vibration band gap behaviors of sandwich panels with corrugated cores
488
Vibration based algorithm for crack detection in cantilever beam containing two different types of cracks
489
Vibration based Assessment of Tool Wear in Hard Turning using Wavelet Packet Transform and Neural Networks
490
Vibration based damage detection in composite beams under temperature variations using Poincaré maps
491
Vibration based damage detection in composite beams under temperature variations using Poincaré maps
492
Vibration based damage detection of a beam-type structure using noise suppression method
493
Vibration based damage detection of rotor blades in a gas turbine engine
494
Vibration Based Diagnosis for Planetary Gearboxes Using an Analytical Model
495
VIBRATION BASED FAULT DETECTION OF ALTERNATOR BY FAST FOURIER TRANSFORM AND ADAPTIVE NEURO FUZZY INFERENCE SYSTEM
496
Vibration based fault diagnosis of monoblock centrifugal pump using decision tree
497
Vibration Based Piezoelectric Energy Harvesting Utilizing Bridgeless Rectifier Circuit
498
Vibration based stiffness reconstruction of beams and frames by observing their rotations under harmonic excitations — Numerical analysis
499
Vibration based structural damage detection in flexural members using multi-criteria approach
500
Vibration based Structural Health Monitoring of a composite T-beam
501
Vibration behavior of ACLD treated beams under thermal environment
502
Vibration behavior of light metals: Al–Zn alloy and Mg–Al–Zn alloy
503
Vibration Behavior of Nanocomposite Plate Reinforced by Pristine and Defective Graphene Sheets; an Analytical Approach
504
Vibration behavior of plantation-grown Scots pine trees in response to wind excitation
505
Vibration Behavior of the Planetary Gear System by Considering the Fixed Output
506
Vibration behavior of thermally stressed composite skew plate
507
Vibration Behavior of Thick Sandwich Composite Beam with Flexible Core Resting on Incompressible Fluid Foundation
508
Vibration behaviors of a box-type structure built up by plates and energy transmission through the structure
509
Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers
510
Vibration behaviour of stators of switched reluctance motors
511
Vibration boundary control of micro-cantilever Timoshenko beam using piezoelectric actuators
512
Vibration cause analysis and elimination of reciprocating compressor inlet pipelines
513
Vibration cavitation behaviour of selected Ni–Mn–Ga alloys
514
Vibration characteristic analysis of buried pipes using the wave propagation approach
515
Vibration characteristic analysis of twenty-high rolling mill with local defect on roll surface based on the time-varying contact stiffness
516
VIBRATION CHARACTERISTICS ANALYSIS OF THE RUB- IMPACT ROTOR SYSTEM WITH MASS UNBALANCE
517
Vibration characteristics and snapping behavior of hygro-thermo-elastic composite doubly curved shells
518
Vibration characteristics and supersonic flutter of cylindrical composite panels with large thermoelastic deflections
519
VIBRATION CHARACTERISTICS AND TRANSIENT RESPONSE OF SHEAR-DEFORMABLE FUNCTIONALLY GRADED PLATES IN THERMAL ENVIRONMENTS
520
Vibration characteristics of a bi-density drumhead
521
Vibration characteristics of a cantilever plate with attached spring–mass system
522
Vibration characteristics of a fiber-reinforced polymer bridge superstructure
523
Vibration Characteristics of a Mistuned Bladed Disk considering the Effect of Coriolis Forces
524
Vibration characteristics of a piezoelectric open-shell transducer
525
Vibration characteristics of a rotating flexible arm with ACLD treatment
526
Vibration characteristics of axially loaded tapered Timoshenko beams made of functionally graded materials by the power series method
527
Vibration characteristics of composite/sandwich laminates with piezoelectric layers using a refined hybrid plate model
528
Vibration characteristics of composite/sandwich laminates with piezoelectric layers using a refined hybrid plate model
529
VIBRATION CHARACTERISTICS OF CONTINUOUSLY VARIABLE TRANSMISSION PUSH BELTS
530
Vibration characteristics of dental high-speed turbines and speed-increasing handpieces
531
Vibration characteristics of embedded multi-layered graphene sheets with different boundary conditions via nonlocal elasticity
532
Vibration Characteristics of Fatigue Damage of Beam-Type Structural Components
533
Vibration characteristics of floating slab track
534
Vibration characteristics of fluid-conveying carbon nanotubes with curved longitudinal shape
535
Vibration characteristics of functionally graded cylindrical shells under various boundary conditions
536
Vibration Characteristics of Functionally Graded Micro-Beam Carrying an Attached Mass
537
Vibration Characteristics of Heavy Load Rack with Split-hom together Structure
538
Vibration characteristics of initially twisted rotating shell type composite blades
539
Vibration characteristics of laminated composite plates with embedded shape memory alloys
540
Vibration characteristics of piezoelectric torsional transducers
541
Vibration characteristics of rotor systems with disk-shaft clearance
542
Vibration Characteristics of Roundabout Swing of HAWT Wind Wheel
543
Vibration characteristics of shallow suspension bridge with pre-tensioned cables
544
VIBRATION CHARACTERISTICS OF SLOTTED SHAFTS
545
Vibration characteristics of SMA composite beams with different boundary conditions
546
Vibration characteristics of thin rotating cylindrical shells with various boundary conditions
547
Vibration characteristics of tractor seat cushion materials
548
Vibration characteristics of tractor seat cushion materials
549
Vibration characteristics of ultrasonic scalers assessed with scanning laser vibrometry
550
Vibration characteristics of vaulted masonry monuments undergoing differential support settlement
551
Vibration Characteristics of Walking and Riding Type Power Tillers
552
Vibration characteristics of wrinkled single-layered graphene sheets
553
Vibration Characteristics Study of Drill String Based on Rotary-impact Drilling Tool in Horizontal Well
554
Vibration confinement and energy harvesting in flexible structures using collocated absorbers and piezoelectric devices
555
Vibration confinement in a general beam structure during harmonic excitations
556
Vibration confinement of thickness-shear and thickness-twist modes in a functionally graded piezoelectric plate
557
Vibration control and electricity generating device using a number of hula-hoops and generators
558
Vibration control and stability analysis of rotor-shaft system with electromagnetic exciters
559
Vibration control by attaching masses to a plate excited by rotating machinery
560
Vibration control by recursive time-delayed acceleration feedback
561
Vibration control for a flexible-link robot arm with deflection feedback
562
Vibration control for an overhung roller in textile machine considering the stiffness of control device stand
563
Vibration control for parametrically excited Liénard systems
564
Vibration control for plate-like structures using strategic cut-outs
565
VIBRATION CONTROL FOR THE PRIMARY RESONANCE OF A CANTILEVER BEAM BY A TIME DELAY STATE FEEDBACK
566
Vibration control for the primary resonance of the van der Pol oscillator by a time delay state feedback
567
VIBRATION CONTROL IDENTIFICATION OF SEISMICALLY EXCITED m.d.o.f. STRUCTURE-PTMD SYSTEMS
568
Vibration control in plates by uniformly distributed PZT actuators interconnected via electric networks
569
Vibration control of a cantilever beam of varying orientation
570
Vibration control of a flexible beam structure using squeeze-mode ER mount
571
Vibration control of a flexible structure using a hybrid mount
572
Vibration control of a flexible structure using a hybrid mount
573
Vibration control of a flexible structure using a hybrid mount
574
Vibration Control of a Flexible Structure Using ER Dampers
575
Vibration Control of a Flexible Structure Using ER Dampers
576
Vibration control of a frame structure using electro-rheological fluid mounts
577
Vibration control of a frame structure using electro-rheological fluid mounts
578
Vibration control of a frame structure using electro-rheological fluid mounts
579
Vibration Control of a Gantry Crane System using Dynamic Feedback Swing Controller
580
VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING INVERSE DYNAMIC ANALYSIS
581
Vibration Control of a Landing Gear System Featuring Electrorheological\Magnetorheological Fluids Design for Civil Aircraft
582
Vibration Control of a Planar Parallel Manipulator Using Piezoelectric Actuators
583
Vibration control of a rotating cantilevered beam using piezoactuators: experimental work
584
VIBRATION CONTROL OF A ROTATING DISK
585
VIBRATION CONTROL OF A ROTATING EULER–BERNOULLI BEAM
586
VIBRATION CONTROL OF A SEMI-ACTIVE SUSPENSION FEATURING ELECTRORHEOLOGICAL FLUID DAMPERS
587
Vibration control of a single-link flexible arm subjected to disturbances
588
Vibration control of a spinning disk
589
Vibration control of a spinning disk
590
Vibration control of a spinning disk
591
Vibration control of a string using a scabbard-like actuator
592
Vibration control of a structure with ATMD against earthquake using fuzzy logic controllers
593
Vibration control of a tall building subjected to earthquake excitation
594
Vibration control of a telescopic handler using time delay control and commandless input shaping technique
595
Vibration control of a very flexible manipulator system
596
VIBRATION CONTROL OF AN ER MOUNT SUBJECTED TO HIGH STATIC LOADS
597
Vibration control of an inverted pendulum type structure by passive mass–spring-pendulum dynamic vibration absorber
598
Vibration control of an IVVS long-reach deployer using unknown visual features from inside the ITER vessel
599
Vibration control of beams on elastic foundation under a moving vehicle and random lateral excitations
600
Vibration control of beams with piezoelectric sensors and actuators using particle swarm optimization
601
Vibration control of bridge subjected to multi-axle vehicle using multiple tuned mass friction dampers
602
Vibration control of building structures using self-organizing and self-learning neural networks
603
Vibration control of buildings using atmd against earthquake excitations through interval type-2 fuzzy logic controller
604
Vibration control of cables with damped flexible end restraint: Theoretical model and experimental verification
605
Vibration control of cantilevered Mindlin-type plates
606
Vibration control of civil structures using piezoceramic smart materials: A review
607
Vibration Control of Double-Beam System with Multiple Smart Damping Members
608
Vibration control of electrorheological seat suspension with human-body model using sliding mode control
609
Vibration control of Gough-Stewart platform on flexible suspension
610
Vibration control of honeycomb sandwich panel using multi-layer piezoelectric actuator
611
Vibration control of linear robots using a piezoelectric actuator
612
Vibration control of maglev vehicles traveling over a flexible guideway
613
Vibration control of piezoelectric beam-type plates with geometrically nonlinear deformation
614
Vibration control of piezoelectric smart structures based on system identification technique: Numerical simulation and experimental study
615
Vibration control of pre-twisted rotating composite thin-walled beams with piezoelectric fiber composites
616
Vibration Control of Railway Bridges under High-Speed Trains Using Multiple Tuned Mass Dampers
617
Vibration control of seismic structures using semi-active friction multiple tuned mass dampers
618
Vibration control of shadow-mask with tension gradient using multiple dynamic absorber
619
Vibration control of simply supported beams under moving loads using fluid viscous dampers
620
Vibration control of smart hull structure with optimally placed piezoelectric composite actuators
621
Vibration control of smart hull structure with optimally placed piezoelectric composite actuators
622
Vibration control of steel jacket offshore platform structures with damping isolation systems
623
Vibration control of structures using adjustable slippage elements
624
Vibration control of super tall buildings subjected to wind loads
625
Vibration control of suspension systems using a proposed neural network
626
Vibration control of tapered magnetostrictive plate considering shear correction factor
627
Vibration control of Timoshenko smart structures using multirate output feedback based discrete sliding mode control for SISO systems
628
Vibration control of two degrees of freedom system using variable inertia vibration absorbers: Modeling and simulation
629
Vibration control of ultrasonic cutting via dynamic absorber
630
Vibration control of variable speed/acceleration rotating beams using smart materials
631
VIBRATION CONTROL OF VARIABLE THICKNESS PLATES WITH PIEZOELECTRIC SENSORS AND ACTUATORS BASED ON WAVELET THEORY
632
Vibration control of various types of buildings using TLCD
633
Vibration control of various types of buildings using TLCD
634
Vibration control of vehicle active suspension system using a new robust neural network control system
635
Vibration control of vehicle ER suspension system using fuzzy moving sliding mode controller
636
Vibration Control on Multilayer Cable Moving through the Crossover Zones on Mine Hoist
637
Vibration control study of a suspension footbridge using hybrid slotted bolted connection elements
638
Vibration Control Using Fuzzy-Logic-Based Active Damping
639
Vibration control using self-organizing look-up tables
640
Vibration correlation technique for the estimation of real boundary conditions and buckling load of unstiffened plates and cylindrical shells
641
Vibration damage detection of a Timoshenko beam by spatial wavelet based approach
642
Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes
643
Vibration damping in beams via piezo actuation using optimal boundary control
644
Vibration damping in bolted friction beam-columns
645
Vibration damping in sandwich panels
646
Vibration damping of cylindrical shells partially coated with a constrained viscoelastic treatment having a standoff layer
647
Vibration damping of cylindrical shells using strain-energy-based distribution of an add-on viscoelastic treatment
648
Vibration damping of piezo actuating composite beams based on the multi-objective genetic algorithm
649
Vibration damping of superalloys and thermal barrier coatings at high-temperatures
650
Vibration damping of superalloys and thermal barrier coatings at high-temperatures
651
Vibration damping performance of ZrTiN coating deposited by arc ion plating on TC4 Titanium alloy
652
Vibration damping properties of gradient polyurethane/vinyl ester resin interpenetrating polymer network
653
Vibration damping properties of steel/rubber/composite hybrid structures
654
Vibration damping through the use of materials with memory
655
Vibration damping using flexible graphite
656
Vibration damping using four-layer sandwich
657
Vibration damping, energy and energy flow in rods and beams: Governing formulae and semi-infinite systems
658
Vibration data analysis for a commercial aircraft : Multivariable vibration data from an aircraft is analyzed using modern system identification tools. The identified linear vibrational model accurately describes the measured motion.
659
Vibration design of laminated fibrous composite plates with local anisotropy induced by short fibers and curvilinear fibers
660
Vibration Diagnostics of a Damaged Inclined Cylindrical Shell
661
Vibration displacement on substrate due to time-harmonic stress sources from a micromechanical resonator
662
VIBRATION DISSIPATION OF A SHELL CONTAINING FLUID
663
Vibration Effect on Particle Bed Aerodynamic Behavior and Thermal Performance of Black Tea in Fluidized Bed Dryers
664
Vibration Effects of Nonclassically Damped Building-Piping Systems Subjected to Extreme Loads
665
Vibration effects on setting pregnant women—subjects of various masses
666
Vibration effects on weak turbulent natural convection in a porous layer heated from below
667
Vibration energy absorption (VEA) in human fingers-hand-arm system
668
Vibration energy absorption in the hand–arm system of hand tractor operator
669
Vibration energy harvesting with a clamped piezoelectric circular diaphragm
670
Vibration Evaluation of the Driver’s Seat of MF 285 Tractor in Conducting the Tillage Operations
671
Vibration excitation and energy transfer during ultrasonically assisted drilling
672
Vibration failure in admission pipe of a steam turbine due to flow instability
673
Vibration fatigue analysis for multi-point spot-welded joints based on frequency response changes due to fatigue damage accumulation
674
Vibration Fatigue Analysis of Two-Stroke Free Piston Engine using Frequency Response Approach
675
Vibration fracture behavior of Sn–9Zn–xCu lead-free solders
676
VIBRATION FREQUENCIES OF A ROTATING FLEXIBLE ARM CARRYING A MOVING MASS
677
Vibration Frequencies of Perylene with Different Molecular Charges
678
Vibration frequency and lock-in bandwidth of tensioned, flexible cylinders experiencing vortex shedding
679
Vibration frequency of graphene based composites: A multiscale approach
680
Vibration generation in a pulse tube refrigerator Original Research Article
681
Vibration in a satellite structure with a laminate composite hybrid sandwich panel
682
Vibration in an Electrically Affected Hygro-magneto-thermo-flexo Electric Nanobeam Embedded in Winkler-Pasternak Foundation
683
Vibration in Continuous Media, J.-L. Guyader. ISTE Ltd., London and New York (2006), ISBN: 1-905209-27-4
684
Vibration in dwellings from road and rail traffic — Part I: a new Norwegian measurement standard and classification system
685
Vibration in dwellings from road and rail traffic — Part II: exposure–effect relationships based on ordinal logit and logistic regression models
686
Vibration in dwellings from road and rail traffic — Part III: towards a common methodology for socio-vibrational surveys
687
Vibration in gear systems
688
Vibration in operating heavy haul trucks in overburden mining
689
Vibration in screw jack mechanisms: experimental results
690
Vibration induced airflow through granular beds and density-dependent segregation
691
Vibration induced low back disorders—comparison of the vibration evaluation according to ISO 2631 with a force-related evaluation
692
Vibration induced mixed convection in an open-ended obstructed cavity
693
Vibration insulation of hydraulic system control components
694
VIBRATION INSULATION RESEARCH RESULTS IN SWITZERLAND
695
Vibration interaction in a multiple flywheel system
696
Vibration isolation and design of automotive test benches
697
Vibration isolation by a row of piles using a 3-D frequency domain BEM
698
Vibration isolation of LNG containment systems due to sloshing with glass fiber composite
699
Vibration isolation of unbalanced machinery using an adaptive-passive magnetoelastic suspension
700
Vibration isolation using buckled or pre-bent columns—Part 1: Two-dimensional motions of horizontal rigid bar
701
Vibration isolation using buckled or pre-bent columns—Part 2: Three-dimensional motions of horizontal rigid plate
702
Vibration isolation using buckled struts
703
Vibration isolation using extreme geometric nonlinearity
704
Vibration levels and frequencies on vehicle and animals during transport
705
Vibration localization in multi-coupled and multi-dimensional near-periodic structures
706
Vibration localization in plates rib-stiffened in two orthogonal directions
707
Vibration localization of simplified mistuned cyclic structures undertaking external harmonic force
708
Vibration measurements in the classical guitar
709
Vibration measurements of the tokamaks components of TEXTOR and T-10 in operation
710
VIBRATION MECHANISM OF 13TH CENTURY HISTORICAL MENAR-JONBAN MONUMENT IN IRAN
711
Vibration mechanism of a mistuned bladed-disk
712
Vibration mill results in the light of stress intensity and number of stressing events
713
Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers
714
Vibration modal analysis of defects in composite T-stiffened panels
715
Vibration mode localization in disordered large planar lattice trusses
716
Vibration mode localization in rib-stiffened plates with misplaced stiffeners in one direction
717
Vibration mode localization in single- and multi-layered graphene nanoribbons
718
Vibration mode localization in two-dimensional systems with multiple substructural modes
719
Vibration mode shape recognition using image processing
720
Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis
721
Vibration modeling of magnetic tape with vibro-impact of tape–guide contact
722
Vibration modelling of complex waveguide structures
723
Vibration modelling of helical springs with non-uniform ends
724
Vibration modes and natural frequencies of saddle form cable nets
725
Vibration Modes and the Dynamic Behaviour of a Hydraulic Plunger Pump
726
Vibration modes of giant gravitons in the background of dilatonic D-branes
727
Vibration modes of planetary gears with unequally spaced planets and an elastic ring gear
728
Vibration monitoring of cylindrical shells using piezoelectric sensors
729
Vibration monitoring of the Atucha-I NPP reactor vessel: experience and future improvements Original Research Article
730
Vibration of a beam excited by a moving oscillator considering separation and reattachment
731
VIBRATION OF A BEAM WITH A BREATHING CRACK
732
Vibration of a circular plate with an attached core
733
VIBRATION OF A COMPLIANT TOWER IN THREE-DIMENSIONS
734
Vibration of a continuous system with clearance and motion constraints
735
VIBRATION OF A DOUBLE-BEAM SYSTEM
736
Vibration of a Flexible Hanging Chain with a Mass on the End in a Nonstationary Regime of the Motion Mechanism in Hoisting Machines
737
VIBRATION OF A FLEXIBLE PIPE CONVEYING VISCOUS PULSATING FLUID FLOW
738
VIBRATION OF A HIGH-PRESSURE PIPING SYSTEM DUE TO FLOW IN A SPHERICAL ELBOW
739
VIBRATION OF A HYDROELASTIC SYSTEM CONSISTING OF A SECTOR SHELL AND VISCOUS LIQUID IN ZERO GRAVITY
740
VIBRATION OF A NONHOMOGENEOUS MEMBRANE
741
Vibration of a rectangular plate undergoing forces moving along a circular path
742
Vibration of a Reissner–Mindlin–Timoshenko plate–beam system
743
Vibration of a rotating shaft with randomly varying internal damping
744
Vibration of a sandwich plate with a constrained layer and electrorheological fluid core
745
Vibration of a standing plate with simply supported vertical sides and weakened by a horizontal hinge
746
Vibration of a string wrapping and unwrapping around an obstacle
747
Vibration of a suspension bridge installed with a water pipeline and subjected to moving trains
748
Vibration of a suspension bridge installed with a water pipeline and subjected to moving trains
749
Vibration of a thin-walled carbon fibre corrugated circular cylinder under external water pressure
750
Vibration of a three-layered viscoelastic sandwich circular plate
751
Vibration of a three-layered viscoelastic sandwich circular plate
752
Vibration of a three-layered viscoelastic sandwich circular plate
753
Vibration of a truss structure excited by a moving oscillator
754
Vibration of a two-member open frame
755
Vibration of a variable cross-section beam
756
Vibration of an annular membrane attached to a free, rigid core
757
Vibration of an atomising disc subjected to a growing distributed mass
758
Vibration of an axially moving beam wrapping on fixed pulleys
759
VIBRATION OF AN AXIALLY MOVING STRING WITH GEOMETRIC NON-LINEARITY AND TRANSLATING ACCELERATION
760
Vibration of an elastic tensegrity structure
761
Vibration of an embedded multiwall carbon nanotube
762
Vibration of an embedded multiwall carbon nanotube
763
Vibration of an Euler–Bernoulli beam on elastic end supports and with up to three step changes in cross-section
764
Vibration of an Euler–Bernoulli beam on elastic end supports and with up to three step changes in cross-section
765
Vibration of an Euler–Bernoulli beam on elastic end supports and with up to three step changes in cross-section
766
Vibration of an Euler–Bernoulli stepped beam carrying a non-symmetrical rigid body at the step
767
Vibration of an incompressible isotropic linear elastic rectangular plate with a higher-order shear and normal deformable theory
768
Vibration of an infinite membrane supported by an array of posts
769
Vibration of an initially stressed rectangular plate due to an accelerated traveling mass
770
Vibration of an oscillator with random damping: Analytical expression for the probability density function
771
Vibration of angle-ply laminated plates with twist by Rayleigh–Ritz procedure Original Research Article
772
Vibration of angle-ply symmetric laminated composite plates with edges elastically restrained
773
Vibration of angle-ply symmetric laminated composite plates with edges elastically restrained
774
Vibration of annular plate concentrators with conical cross-section
775
Vibration of axisymmetric composite piezoelectric shells coupled with internal fluid
776
Vibration of beams with arbitrary discontinuities and boundary conditions
777
Vibration of beams with double delaminations
778
VIBRATION OF BEAMS WITH GENERAL BOUNDARY CONDITIONS DUE TO A MOVING HARMONIC LOAD
779
VIBRATION OF BEAMS WITH GENERALLY RESTRAINED BOUNDARY CONDITIONS USING FOURIER SERIES
780
Vibration of beams with multiple open cracks subjected to axial force
781
Vibration of beams with piezoelectric inclusions
782
Vibration of beams with two overlapping delaminations in prebuckled states
783
Vibration of buckled elastic structures with large rotations by an asymptotic numerical method
784
Vibration of cantilevered laminated composite shallow conical shells
785
Vibration of cantilevers with rough surfaces
786
VIBRATION OF CAVITATING ELASTIC WING IN A PERIODICALLY PERTURBED FLOW: EXCITATION OF SUBHARMONICS
787
Vibration of CFRP cantilever beam with damage
788
Vibration of circular membranes with linearly varying density along a diameter
789
Vibration of circular Mindlin plates with concentric elastic ring supports
790
Vibration of circular Mindlin plates with concentric elastic ring supports
791
Vibration of circular Mindlin plates with concentric elastic ring supports
792
Vibration of collecting electrodes in electrostatic precipitators – Modelling, measurements and simulation tests
793
Vibration of composite beams with two overlapping delaminations
794
Vibration of composites and sandwich laminates subjected to in-plane partial edge loading
795
Vibration of coupled train and cable-stayed bridge systems in cross winds
796
VIBRATION OF CRACKED CIRCULAR PLATES AT RESONANCE FREQUENCIES
797
Vibration of Cracked Plate Using Differential Quadrature Method and Experimental Modal Analysis
798
Vibration of cross-ply laminated composite plates subjected to initial in-plane stresses
799
Vibration of damaged beams under a moving mass: theory and experimental validation
800
Vibration of delaminated multilayer beams
801
Vibration of double-walled carbon nanotube based nanomechanical sensor with initial axial stress
802
Vibration of doubly curved shallow shells with arbitrary boundaries
803
Vibration of elastically restrained cross-ply laminated plates with variable thickness
804
Vibration of electro-elastic versus magneto-elastic circular/annular plates using the Chebyshev–Ritz method
805
Vibration of elevator cables with small bending stiffness
806
Vibration of EulerBernoulli and Timoshenko beams in large overall motion on flying support using finite element method
807
Vibration of fast trains, palindromic eigenvalue problems and structure-preserving doubling algorithms
808
Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model
809
Vibration of fluid-filled multi-walled carbon nanotubes seen via nonlocal elasticity theory
810
Vibration of H atomic chains on Ni(1 1 0) measured by scanning tunneling microscope (STM) light emission spectroscopy
811
Vibration of higher-order-shearable pretwisted rotating composite blades
812
Vibration of higher-order-shearable pretwisted rotating composite blades
813
Vibration of higher-order-shearable pretwisted rotating composite blades
814
Vibration of horn-shaped carbon nanotube with attached mass via nonlocal elasticity theory
815
Vibration of imperfect composite and sandwich laminates with in-plane partial edge load
816
Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory
817
Vibration of isotropic and composite plates using computed shape function and its application to elastic support optimization
818
Vibration of laminated composite skew hypar shells using higher order theory
819
Vibration of laminated composites and sandwich shells based on higher order zigzag theory
820
Vibration of Laminated Shells and Plates, M.S. Qatu. Elsevier, Amsterdam (2004), ISBN: 0-08-044271-4
821
Vibration of Laminated Shells and Plates, Mohamad S. Qatu. Elsevier, Academic Press, Oxford, UK (2004), ISBN: 0-08044271-4
822
VIBRATION OF LINEAR GUIDEWAY TYPE RECIRCULATING LINEAR BALL BEARINGS
823
Vibration of L-shaped plates under a deterministic force or moment excitation: a case of statistical energy analysis application
824
Vibration of MEE Composite Conical Shell Surrounded by Nonlinear Elastic Foundation Considering the Effect of Geometrical Nonlinearity
825
Vibration of microscale beam induced by laser pulse
826
Vibration of microtubules as orthotropic elastic shells
827
Vibration of moderately thick square orthotropic stepped thickness plates
828
Vibration of Moving Strip With Distributed Stress in Rolling Process Original Research Article
829
Vibration of multi-layered bands with interfacial imperfection
830
Vibration of multilayered beams using sinus finite elements with transverse normal stress
831
Vibration of multi-walled carbon nanotubes by generalized shear deformation theory
832
Vibration of multi-walled carbon nanotubes by generalized shear deformation theory
833
Vibration of multi-walled carbon nanotubes with initial axial loading
834
Vibration of nanoscale plates with surface energy via nonlocal elasticity
835
Vibration of non-homogeneous circular Mindlin plates with variable thickness
836
Vibration of non-homogeneous rectangular membranes with arbitrary interfaces
837
Vibration of non-ideal simply supported laminated plate on an elastic foundation subjected to in-plane stresses
838
Vibration of nonuniform shear deformable axisymmetric orthotropic circular plates solved by DQEM
839
Vibration of non-uniform thick plates on elastic foundation by differential quadrature method
840
Vibration of open circular cylindrical shells with intermediate ring supports
841
Vibration of Open Cylindrical Shells with Stepped Thickness Variations
842
Vibration of orthotropic plates: discussion on the completeness of the solutions used in direct methods
843
Vibration of Piezoelectric Nanowires Including Surface Effects
844
Vibration of plates in contact with viscous fluid: Extension of Lambʹs model
845
VIBRATION OF PLATES IN DIFFERENT SITUATIONS USING A HIGH-PRECISION SHEAR DEFORMABLE ELEMENT
846
Vibration of plates with arbitrary shapes of cutouts
847
Vibration of Plates with Constrained V-Notches or Cracks
848
Vibration of plates with sub-structural deduction: a reverse receptance approach
849
Vibration of postbuckled delaminated beam-plates
850
Vibration of postbuckled FGM hybrid laminated plates in thermal environment
851
Vibration of post-buckled sandwich plates with FGM face sheets in a thermal environment
852
Vibration of pretwisted cantilever shallow conical shells
853
Vibration of prismatic beam on an elastic foundation by the differential quadrature element method
854
Vibration of railway bridges under a moving train by using bridge-track-vehicle element
855
Vibration of rectangular Mindlin plates resting on non-homogenous elastic foundations
856
Vibration of rectangular Mindlin plates resting on non-homogenous elastic foundations
857
Vibration of rectangular Mindlin plates resting on non-homogenous elastic foundations
858
VIBRATION OF RIGHT-ANGLED TRIANGULAR PLATES PARTIALLY CLAMPED ON ONE SIDE
859
Vibration of rings on a general elastic foundation
860
Vibration of rotating disk/spindle systems with flexible housing/stator assemblies
861
Vibration of shallow conical shells with shear flexibility: A first-order theory Pages 451-468
862
Vibration of shear deformable plates with variable thickness — first-order and higher-order analyses
863
Vibration of signal wires in wire detectors under irradiation
864
Vibration of single-layered graphene sheet-based nanomechanical sensor via nonlocal Kirchhoff plate theory
865
Vibration of skew plates by the MLS-Ritz method
866
Vibration of skew plates by the MLS-Ritz method
867
Vibration of small molecules on Pt(1 1 1) surface
868
VIBRATION OF STIFFENED PLATES USING HIERARCHICAL TRIGONOMETRIC FUNCTIONS
869
VIBRATION OF STRAIGHT–CURVED–STRAIGHT HOLLOW SHAFTS
870
Vibration of strings with nonlinear supports
871
Vibration of tapered Mindlin plates in terms of static Timoshenko beam functions
872
Vibration of the ball screw drive
873
Vibration of thermally post-buckled composite plates embedded with shape memory alloy fibers
874
Vibration of Thermally Post-Buckled Orthotropic Circular Plates
875
Vibration of thermo-electrically post-buckled rectangular functionally graded piezoelectric beams
876
Vibration of thermomechanically loaded flat and curved panels taking into account geometric imperfections and tangential edge restraints
877
Vibration of Thick and Thin Plates Using a New Triangular Element
878
Vibration of thin pre-twisted helical beams
879
Vibration of thin, tensioned, helically wrapped plates
880
Vibration of Timoshenko beams on three-parameter elastic foundation
881
Vibration of Timoshenko Beams with Internal Hinge
882
Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
883
Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength
884
VIBRATION OF TWISTED AND CURVED CYLINDRICAL PANELS WITH VARIABLE THICKNESS
885
Vibration of twisted laminated composite conical shells
886
Vibration of twisted laminated composite conical shells
887
Vibration of twisted laminated composite conical shells
888
Vibration of two bonded composites: effects of the interface and distinct periodic structures
889
Vibration of variable thickness plates with edges elastically restrained against translation and rotation
890
Vibration of Vehicle on Compressed Rail on Viscoelastic Foundation
891
Vibration of viscoelastic beams subjected to an eccentric compressive force and a concentrated moving harmonic force
892
Vibration of visco-elastic rectangular plate with linearly thickness variations in both directions
893
Vibration of wavy single-walled carbon nanotubes based on nonlocal Euler Bernoulli and Timoshenko models
894
Vibration of wires used in electro-discharge machining
895
Vibration Optimization of Fiber-Metal Laminated Composite Shallow Shell Panels Using an Adaptive PSO Algorithm
896
VIBRATION PARAMETERS FOR DAMAGE DETECTION IN STRUCTURES
897
Vibration perception thresholds of human maxillary and mandibular central incisors
898
VIBRATION POWER TRANSMISSION OVER A RECTANGULAR AREA OF AN INFINITE PLATE SUBJECT TO UNIFORM CONPHASE VELOCITY EXCITATION
899
Vibration prediction in combustion chambers by coupling finite elements and large eddy simulations
900
Vibration prediction in switched reluctance motors with transfer function identification from shaker and force hammer tests
901
Vibration predictions and verifications of disk drive spindle system with ball bearings
902
Vibration promotes heat welding of single-walled carbon nanotubes
903
VIBRATION PRONE MULTI-PURPOSE BUILDINGS AND TOWERS EFFECTIVELY DAMPED BY TUNED LIQUID COLUMN-GAS DAMPERS
904
Vibration protection for an operator of a hand-held percussion machine
905
VIBRATION PROTECTION OF CRITICAL COMPONENTS OF ELECTRONIC EQUIPMENT IN HARSH ENVIRONMENTAL CONDITIONS
906
Vibration protection of sensitive components of infrared equipment in harsh environments
907
VIBRATION PROTECTION OF SENSITIVE ELECTRONIC EQUIPMENT FROM HARSH HARMONIC VIBRATION
908
Vibration receptive sensilla on the wing margins of the silkworm moth Bombyx mori
909
Vibration reduction and monitoring
910
Vibration reduction by using the idea of phononic crystals in a pipe-conveying fluid
911
Vibration reduction for cable-stayed bridges traveled by high-speed trains
912
Vibration reduction in a 2DOF twin-tail system to parametric excitations
913
Vibration reduction in piecewise bi-coupled periodic structures
914
Vibration reduction of a CD-ROM drive base using a piezoelectric shunt circuit
915
Vibration reduction of a pitch-roll ship model with longitudinal and transverse absorbers under multi excitations
916
Vibration reduction of a single cylinder reciprocating compressor based on multi-stage balancing
917
Vibration reduction of a three DOF non-linear spring pendulum
918
Vibration reduction of beams under successive traveling loads by means of linear and nonlinear dynamic absorbers
919
Vibration reduction of curved panels by active modal control
920
Vibration reduction of floating elastic plates in water waves
921
Vibration reduction of high-speed railway bridges by adding size-adjusted vehicles
922
Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links
923
Vibration reduction on beams subjected to moving loads using linear and nonlinear dynamic absorbers
924
Vibration Response Characteristics of the Cross Tunnel Structure
925
Vibration response of a cracked rotor in presence of rotor–stator rub
926
Vibration response of a piezoelectrically actuated microcantilever subjected to tipsample interaction
927
Vibration Response of a U-Tube Bundle with Anti-Vibration Bar Supports due to Turbulence and Fluidelastic Excitations
928
Vibration Response of an Elastically Connected Double-Smart Nanobeam-System Based Nano-Electro-Mechanical Sensor
929
Vibration response of an elastically point-supported plate with attached masses
930
Vibration response of double-walled carbon nanotubes subjected to an externally applied longitudinal magnetic field: A nonlocal elasticity approach
931
Vibration response of laminated plates containing spheroidal Stress and failure analysis of mechanically fastened joints in composite laminates
932
Vibration response of microcantilevers bounded by a confined fluid
933
Vibration response of microcantilevers bounded by a confined fluid
934
Vibration response of microcantilevers bounded by a confined fluid
935
Vibration response of misaligned rotors
936
Vibration response of rigid rotor in unloaded rolling element bearing
937
Vibration response of rigid rotor in unloaded rolling element bearing
938
Vibration response of stepped FGM beams with elastically end constraints using differential transformation method
939
Vibration Safety Criteria for Surficial Rock Mass of Open Pit Slope Affected by Underground Mining Blasting Operations
940
Vibration sensitive behaviour of a connecting angle. Case of coupled beams and plates
941
Vibration Sensitivity Analysis of Nano-mechanical Piezo-Laminated Beams with Consideration of Size Effects
942
Vibration sensitivity of the scanning near-field optical microscope with a tapered optical fiber probe
943
Vibration sensitivity of the scanning near-field optical microscope with a tapered optical fiber probe
944
Vibration serviceability of footbridges under human-induced excitation: a literature review
945
Vibration serviceability of footbridges: Evaluation of the current codes of practice
946
Vibration serviceability of stadia structures subjected to dynamic crowd loads: A literature review
947
VIBRATION SIGNAL ANALYSIS AND FEATURE EXTRACTION BASED ON REASSIGNED WAVELET SCALOGRAM
948
Vibration signal analysis using wavelet transform for isolation and identification of electrical faults in induction machine
949
Vibration signal behaviour and the use of modulatory communication in established and newly founded honeybee colonies
950
Vibration signal classification by wavelet packet energy flow manifold learning
951
Vibration signal component separation by iteratively using basis pursuit and its application in mechanical fault detection
952
Vibration signal emission from mono-size particle breakage
953
Vibration Signal Forecasting on Rotating Machinery by means of Signal Decomposition and Neurofuzzy Modeling
954
Vibration signal modeling of a planetary gear set for tooth crack detection
955
Vibration signal models for fault diagnosis of planetary gearboxes
956
Vibration Signals Analysis and Condition Monitoring of Centrifugal Pump
957
Vibration signature analysis of single walled carbon nanotube based nanomechanical sensors
958
Vibration simulation and fatigue life estimation of a printed circuit board using a validated model
959
Vibration source identification using corrected finite difference schemes
960
Vibration spectra of polar mixing optical phonon states and Frohlich electron-phonon coupling behaviors in a wurtzite ZnO quantum dot
961
Vibration spectra of soliton boundaries separating nanostructured 2D hexagonal lattice domains
962
Vibration spectroscopic study of the interaction of tris-(8-hydroxyquinoline) aluminum (Alq3) with potassium
963
Vibration spectroscopy of water on stepped gold surfaces
964
Vibration spectrum of a pulse-tube cryostat from 1 Hz to 20 kHz Original Research Article
965
VIBRATION STUDIES OF COMPOSITE THIN-WALLED CURVED BOX-BEAM USING STRUCTURAL TAILORING
966
Vibration studies of rotating cylindrical shells with arbitrary edges using characteristic orthogonal polynomials in the Rayleigh–Ritz method
967
Vibration studies of rotating cylindrical shells with arbitrary edges using characteristic orthogonal polynomials in the Rayleigh–Ritz method
968
Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers
969
Vibration suppression control of smart piezoelectric rotating truss structure by parallel neuro-fuzzy control with genetic algorithm tuning
970
Vibration suppression device using permanent-electromagnet and MRF shear damper
971
Vibration suppression for high-speed railway bridges using tuned mass dampers
972
Vibration Suppression for Improving the Estimation of Kinematic Parameters on Industrial Robots
973
Vibration suppression in a twin-tail system to parametric and external excitations
974
Vibration suppression in belt-driven servo systems containing uncertain nonlinear dynamics
975
VIBRATION SUPPRESSION IN USING ACTIVE MODAL CONTROL
976
VIBRATION SUPPRESSION OF A BEAM STRUCTURE BY INTERMEDIATE MASSES AND SPRINGS
977
Vibration suppression of a cantilever beam using eddy current damper
978
Vibration suppression of a cantilever beam using magnetically tuned-mass-damper
979
Vibration suppression of a flexible piezoelectric beam using BP neural network controller
980
Vibration Suppression of a Micropipe Conveying Fluid via Sliding Mode Technique
981
Vibration suppression of a string through cyclic application and removal of constraints
982
Vibration suppression of boring bar by piezoelectric actuators and LR circuit
983
Vibration suppression of composite sandwich beams
984
Vibration suppression of FGM shells using embedded magnetostrictive layers
985
VIBRATION SUPPRESSION OF FUEL SLOSHING USING SUBBAND ADAPTIVE FILTERING (RESEARCH NOTE)
986
Vibration Suppression of Grass Trimmer Handle using Tunable Vibration Absorber
987
Vibration suppression of laminated composite beams with a piezo-electric damping layer
988
Vibration suppression of laminated plates with 1–3 piezoelectric fiber-reinforced composite layers equipped with interdigitated electrodes
989
Vibration suppression of non-linear system via non-linear absorber
990
Vibration suppression of plate using linear MR fluid passive damper
991
Vibration suppression of rotating beams using time-varying internal tensile force
992
Vibration Suppression of Simply Supported Beam under a Moving Mass using On-Line Neural Network Controller
993
Vibration suppression of stepped beams: new designs for hot-wire probes
994
Vibration suppression of structures with densely spaced modes using maximally robust minimum delay digital finite impulse response filters
995
VIBRATION SUPPRESSION USING A LASER VIBROMETER AND PIEZOCERAMIC PATCHES
996
Vibration tailoring of heterogeneous beams and annular plates
997
Vibration tailoring of inhomogeneous rod that possesses a trigonometric fundamental mode shape
998
Vibration test and assessment for an ocean drilling rig derrick: Taking the ZJ50/3150DB drilling rig as an example
999
Vibration testing based on impulse response excited by laser ablation
1000
Vibration testing based on impulse response excited by pulsed-laser ablation: Measurement of frequency response function with detection-free input