<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Effect of the A Cation Size on the Structural, Magnetic, and Electrical Properties of Perovskites (La1-xNdx)0.7Sr0.3r003nMnO3
2
Effect of the accretion by water drops on the melting of snowflakes
3
Effect of the accuracy of spatial rainfall information on the modeling of water, sediment, and NO3–N loads at the watershed level
4
Effect of the acetate group content on gas permeation through membranes based on poly(ethylene-co-vinyl acetate) and its blends
5
Effect of the acid–base properties of the support on the performance of Pt catalysts in the partial hydrogenation of citral
6
Effect of the acidity of alumina over Pt, Pd, and Pt–Pd (1:1) based catalysts for 2-propanol dehydration reactions
7
Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor Original Research Article
8
Effect of the activated Raf protein kinase on the human multidrug resistance 1 (MDR1) gene promoter
9
Effect of the activating agent on physico-chemical and electrical properties of activated carbon cloths developed from a novel cellulosic precursor
10
Effect of the activation atmosphere on the activity of Fe catalysts supported on SBA-15 in the Fischer–Tropsch Synthesis
11
Effect of the activation method on the properties and adsorption behavior of bagasse fly ash-based activated carbon
12
Effect of the activation process on thiophene hydrodesulfurization activity of activated carbon-supported bimetallic carbides
13
Effect of the activation temperature on the state of gold supported on titania: An FT-IR spectroscopic study Original Research Article
14
Effect of the active principle of garlic—Diallyl sulfide—On cell viability, detoxification capability and the antioxidation system of primary rat hepatocytes
15
Effect of the activity levels of the added proteolytic enzyme mixture on free amino acids in ripening Ossau-Iraty cheese
16
Effect of the actual distribution of applied stresses on global buckling of isotropic and transversely isotropic thin-walled members: Numerical examples
17
Effect of the actual distribution of applied stresses on global buckling of isotropic and transversely isotropic thin-walled members: theoretical analysis
18
Effect of the actual environment present in hermetic compressors on the tribological behaviour of a Si-rich multifunctional DLC coating
19
Effect of the acyl groups on O→N acyl migration in the water-soluble prodrugs of HIV-1 protease inhibitor
20
Effect of the adaptation to high bile salts concentrations on glycosidic activity, survival at low PH and cross-resistance to bile salts in Bifidobacterium
21
Effect of the adding ferrum in nickel/GDC anode-supported solid-oxide fuel cell in the intermediate temperature
22
Effect of the addition mode of carbon nanotubes for the production of chitosan hydrogel core–shell beads on adsorption of Congo red from aqueous solution
23
Effect of the addition of a fugitive salt on electrospinnability of poly(ɛ-caprolactone)
24
Effect of the addition of ammonium and amino acids to musts of Airen variety on aromatic composition and sensory properties of the obtained wine
25
Effect of the addition of Au in zirconia and ceria supported Pd catalysts for the direct synthesis of hydrogen peroxide
26
Effect of the addition of B2O3 and BaO–B2O3–SiO2 glasses on the microstructure and dielectric properties of giant dielectric constant material CaCu3Ti4O12
27
Effect of the addition of bentonite to the tirage solution on the nitrogen composition and sensory quality of sparkling wines.
28
Effect of the addition of calcium hydroxide on the hydrothermal–mechanochemical treatment of Eucalyptus
29
Effect of the addition of calcium soap to ewes’ diet on fatty acid composition of ewe milk and subcutaneous fat of suckling lambs reared on ewe milk
30
Effect of the addition of CaO–MgO–SiO2 glass on the sintering and mechanical properties of Al2O3/3Y-TZP composites
31
Effect of the addition of carbon black and carbon nanotube to FeS2 cathode on the electrochemical performance of thermal battery
32
Effect of the addition of carbon black and carbon nanotubes on the structure and oxidation resistance of pyrolysed phenolic carbons
33
Effect of the addition of carbon black and carbon nanotubes on the structure and oxidation resistance of pyrolysed phenolic carbons
34
Effect of the addition of carbon nanotubes on the properties of low carbon Al2O3 refractory materials
35
Effect of the addition of carbonaceous fibers on the tribological behavior of a phenolic resin sliding against cast iron
36
Effect of the addition of chitosan ethers on the fresh state properties of cement mortars
37
Effect of the addition of coal-ash and cassava peels on the engineering properties of compressed earth blocks
38
Effect of the addition of conventional additives and whey proteins concentrates on technological parameters, physicochemical properties, microstructure and sensory attributes of sous vide cooked beef muscles
39
Effect of the addition of cosolvent on the supercritical fluid extraction of bioactive compounds from Helianthus annuus L.
40
Effect of the addition of crystalline β-phase in Al–Cu–Fe quasicrystalline coatings on their tribological properties
41
Effect of the addition of dextrin or dried egg on the rheological and textural properties of batters for fried foods
42
Effect of the addition of different fibres on wheat dough performance and bread quality
43
Effect of the addition of different ingredients on the characteristics of a batter coating for fried seafood prepared without a pre-frying step
44
Effect of the addition of Fe3O4 nanoparticles on the performance of polyethersulfone nanofiltration membrane for the rejection of 54,56Mn ions from aqueous solution
45
Effect of the addition of gypsum- and lime-rich industrial by-products on Cd, Cu and Pb availability and leachability in metal-spiked acid soils
46
Effect of the addition of hydrophobic clay on the electrochemical property of polyacrylonitrile/LiClO4 polymer electrolytes for lithium battery
47
Effect of the Addition of Insulin Like Growth Factor-I (IGF-I) on Cryopreservation of Hariana Bull Semen
48
Effect of the addition of La2O3 on TPR and TPD of CuOγ-Al2O3 catalysts Original Research Article
49
Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium
50
Effect of the addition of malate on in vitro rumen fermentation of cereal grains
51
Effect of the addition of mullite–zirconia to the thermal shock behavior of zircon materials
52
Effect of the addition of Na to Pt/Al2O3 catalysts for the reduction of NO by C3H8 and C3H6 under lean-burn conditions
53
Effect of the addition of n-alkylamines on liquefaction of Banko coal
54
Effect of the addition of organically modified nanofiller on the relaxation behavior of a thermoplastic amorphous matrix
55
Effect of the addition of oxo-anions on the corrosion and passivation of tin in synthetic industrial water
56
Effect of the addition of Peptostreptococcus productus ATCC 35244 on reductive acetogenesis in the ruminal ecosystem after inhibition of methanogenesis by cell-free supernatant of Lactobacillus plantarum 80
57
Effect of the addition of poly(d-lactic acid) on the thermal property of poly(l-lactic acid)
58
Effect of the addition of polyvinylpyrrolidone as a pore-former on microstructure and mechanical strength of porous alumina ceramics
59
Effect of the addition of potassium and lithium in Pt–Sn/Al2O3 catalysts for the dehydrogenation of isobutane
60
Effect of the addition of red mud on the corrosion parameters of reinforced concrete
61
Effect of the addition of room temperature ionic liquid and ZnO nanoparticles on the wear and scratch resistance of epoxy resin
62
Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film
63
Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking
64
Effect of the addition of tomato paste on the nutritional and sensory properties of mortadella
65
Effect of the addition of transition metals to Pt/Ba/Al2O3 catalyst on the NOx storage-reduction catalysis under oxidizing conditions in the presence of SO2
66
Effect of the addition of t-ZrO2 on the material properties of b-TCP/PCL composites
67
Effect of the addition of waste sawdust on thermoplastic properties of a coal
68
Effect of the addition of water on the preparation of pillared carbon from graphite oxide silylated by a two-step method
69
Effect of the addition of wood shavings on thermal conductivity of sand concretes: Experimental study and modelling
70
Effect of the addition of YAG (Y3Al5O12) nanopowder on the mechanical properties of lanthanum zirconate
71
Effect of the addition of ZnO seeds on the electrical proprieties of ZnO-based varistors
72
Effect of the addition of β-Si3N4 nuclei on the thermal conductivity of β-Si3N4 ceramics
73
Effect of the addition ZrO2–Al2O3 on nanocrystalline hydroxyapatite bending strength and fracture toughness
74
Effect of the additive level and of the processing temperature on the re-building of post-consumer pipes from polyethylene blends
75
Effect of the adhesion interaction and the degree of filling on the internal stresses in finely divided crystalline fillers of epoxy composites
76
Effect of the adhesion strength of Si and Ge superlattices Original Research Article
77
Effect of the administration of fermentable and non-fermentable dietary fibre on intestinal bacterial translocation in ascitic cirrhotic rats
78
Effect of the administration of young oak (Quercus pyrenaica) leaves to cattle on ruminal fermentation
79
EFFECT OF THE ADMIXTURES REACTIVITY ON THE STRENGTH OF MORTARS: APPLICATION OF THE PREDECTIVE MODEL FOR BOLOMEY
80
Effect of the adsorbed concentration of dye on charge recombination in dye-sensitized solar cells
81
Effect of the adsorption isotherm on one- and two-component diffusion in activated carbon Original Research Article
82
Effect of the adsorption of ethylene carbonate on Si surfaces on the Li insertion behavior
83
Effect of the aeration system on the levels of airborne microorganisms generated at wastewater treatment plants
84
Effect of the Aerobic and Resistance Training on Follistatin-Like 1 and Leukemia Inhibitory Factor Muscle Gene Expression in Rats Fed With a High-Fat Diet
85
Effect of the Affective and Cognitive Benefits of Exercise in Instagram on Users Physical Activity
86
Effect of the Affective Stimulation-Based Family-Centered Integrated Spiritual Support on Psychological Aspects of Acute Coronary Syndrome Patients
87
Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers
88
Effect of the age of papers on the preferential attachment in citation networks
89
Effect of the ageing atmosphere on catalytic activity and textural properties of Pd/Rh exhaust gas catalysts studied by XRD Original Research Article
90
Effect of the aggregation level of surface runoff fields and sewer network for a SWMM simulation Original Research Article
91
Effect of the aging on lees and other alternative techniques on the low molecular weight phenols of Tempranillo red wine aged in oak barrels Original Research Article
92
Effect of the aging time of PVP coated palladium nanoparticles colloidal suspensions on their catalytic activity in the preferential oxidation of CO
93
Effect of the agitation on the adsorption and hydrolytic efficiency of cutinases on polyethylene terephthalate fibres
94
Effect of the air outlet louver on the noise generated by the outdoor set of a split-unit air conditioner
95
Effect of the airflow rate of a ceiling type air-conditioner on ventilation effectiveness in a lecture room
96
Effect of the Al/clay ratio on the thiabendazol removal by aluminum pillared clays
97
Effect of the Al2O3 + Ni–Al multilayer on the mechanical properties of Inconel 600 alloy
98
Effect of the alcohol type used in the production of waste cooking oil biodiesel on diesel performance and emissions
99
Effect of the alcoholic extract of the grape (Vitis Vinifera L.) and pomegranate (Punica Granatum L.) seed on the immunogenicity of the inactivated avian influenza virus subtype H9N2 in broilers
100
Effect of the alginate composition on the biocompatibility of alginate-polylysine microcapsules
101
Effect of the alkali concentration on the crystallization of BaF2 from Na2O/K2O/BaF2/Al2O3/SiO2 glasses
102
Effect of the alkyl chain length of 1,1′-binaphthyl esters in lipase-catalyzed amidation
103
Effect of the alkyl chain length on the anaerobic biodegradability and toxicity of quaternary ammonium based surfactants
104
Effect of the Alkyl Group Substituents on the Thermal and Enzymatic Degradation of Poly(n-alkyl acrylates)
105
Effect of the alkyl-lysophospholipids on the proliferation and differentiation of Trypanosoma cruzi
106
Effect of the alloy on micro-structured reactors for methanol steam reforming
107
Effect of the alloying element chromium on the room temperature ductility of Fe3Al intermetallics
108
Effect of the Al-MCM-41 properties on the catalytic liquid phase rearrangement of 1,2-epoxyoctane Original Research Article
109
Effect of the alterations in the fusion protein of measles virus isolated from brains of patients with subacute sclerosing panencephalitis on syncytium formation
110
Effect of the Altitude Geographic and Species Type on the Volatile Compounds of the Genus Origanum from Southern Perú
111
Effect of the aluminium content and the bias voltage on the microstructure formation in Ti1 − xAlxN protective coatings grown by cathodic arc evaporation
112
Effect of the aluminium fluoride phase for the Cl/F exchange reactions in CCl2F2 (CFC-12) and CHClF2 (HCFC-22)
113
Effect of the ambient field on the I–V characteristics of nanowire resistors and junctions—A simulation study
114
EFFECT OF THE AMIDE CONNECTING TETHER TYPE OF PIRKLECONCEPT CHIRAL STATIONARY PHASES DERIVED FROM (S)-N(3,5-DINITROBENZOYL)LEUCINE ON ENANTIOMERIC SEPARATIONS
115
Effect of the amino and hydroxy substituents on the photophysical properties of 1,4-disubstituted-9,10-anthraquinone dyes
116
Effect of the amino versus the acylamino substituent on the product isomer distribution in the methanolysis of 5-(substituted)-2-[(methylsulfonyl)oxy]isoindole-1,3-diones
117
Effect of the Ammonium ChlorideConcentration on the Mineral Medium Composition – Biodegradation of Phenol by a Microbial Consortium
118
Effect of the amorphous thin layer on the surface growth of amorphous/crystalline binary multilayer films
119
Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocomposites
120
Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beams
121
Effect of the amount of cold working and ageing on the ductility of a Cu–15%Cr–0.2%Ti in-situ composite
122
Effect of the amount of cold working and ageing on the ductility of a Cu–15%Cr–0.2%Ti in-situ composite
123
Effect of the amount of excess oxides on the densification of a-SiAlON fabricated via a reaction-bonding process
124
Effect of the Amount of Hydroxyethylmethacrylate in an Experimental Dentin Bonding System on the Degree of Conversion and Microleakage of Class V Composite Restorations
125
Effect of the amount of steam during baking on bread crust features and water diffusion Original Research Article
126
Effect of the amounts of silicon on the in situ synthesis of Ti3SiC2 based composites made from TiC/Si powder mixtures
127
Effect of the anchoring group in porphyrin sensitizers: phosphonate versus carboxylate linkages
128
Effect of the angiotensin I-converting enzyme I/D polymorphism on cognitive declinesmall star, filled
129
Effect of the angiotensin II type 2-receptor gene (+1675 G/A) on left ventricular structure in humans
130
Effect of the angiotensin-converting enzyme inhibitor imidapril on reactive hyperemia in patients with essential hypertension: relationship between treatment periods and resistance artery endothelial function
131
Effect of the angiotensin-converting enzyme inhibitor trandolapril on mortality and morbidity in diabetic patients with left ventricular dysfunction after acute myocardial infarction
132
Effect of the angle of attack on flaking behavior in pearlitic and bainitic steel rails
133
Effect of the angle of attack on the wind convection coefficient
134
Effect of the angle of inclination of a plate shield on the thermal and hydraulic performance of a plate-fin heat sink
135
Effect of the angle of seismic incidence on the response of a long-span curved bridge under spatially varying ground motions
136
Effect of the angle of the screw on the stability of the mandibular sagittal split ramus osteotomy: a study in sheep mandibles
137
Effect of the angular dependence of the barrier height on the features of the F+H2 reaction Original Research Article
138
Effect of the anion and the cation of an electrolyte on the activity coefficient of dl-alanine in aqueous solutions
139
Effect of the anisotropic growth on the fracture toughness measurements obtained in the Fe2B layer
140
Effect of the anisotropic thermal conductivity of GDL on the performance of PEM fuel cells
141
Effect of the Anisotropy of Physicomechanical Properties on the Kinetics of Cracks in Austenitic Steels
142
Effect of the anisotropy of the electron g-factor in spin polarization
143
Effect of the annealing environment on the optical properties of ZnO/GaAs grown by MOCVD
144
Effect of the annealing temperature on the mechanical properties, formability and corrosion resistance of hot-rolled duplex stainless steel
145
Effect of the annealing temperature on the microstructural evolution and mechanical properties of TiZrAlV alloy
146
Effect of the annealing time on the physico-chemical properties of WO3 thin films prepared by spray pyrolysis
147
Effect of the annulus aeration on annulus leakage and particle circulation in a three-phase spout-fluid bed with a draft tube
148
Effect of the anode microstructure on the enhanced performance of solid oxide fuel cells
149
Effect of the anodic current density on copper electrodeposition in the hydrogen co-deposition range by the reversing current (RC) regime
150
Effect of the antagonist Candida sake on apple surface microflora during cold and ambient (shelf life) storage
151
Effect of the antenatal administration of celecoxib during the second and third trimesters of pregnancy on prostaglandin, cytokine, and nitric oxide levels in rabbits
152
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics of a retrofitted down-fired 660-MWe utility boiler
153
Effect of the anthranilic diamide insecticide, chlorantraniliprole, on Heterorhabditis bacteriophora (Rhabditida: Heterorhabditidae) efficacy against white grubs (Coleoptera: Scarabaeidae)
154
Effect of the antifungal activity of oxygenated aromatic essential oil compounds on the white-rot Trametes versicolor and the brown-rot Coniophora puteana
155
Effect of the antimalarial drug halofantrine in the long QT syndrome due to a mutation of the cardiac sodium channel gene SCN5A
156
Effect of the antimicrobial peptide LL-37 on Toll-like receptors 2-, 3- and 4-triggered expression of IL-6, IL-8 and CXCL10 in human gingival fibroblasts
157
Effect of the antineoplastic agent busulfan on rat molar root development
158
Effect of the antioxidant ascorbic acid on sclerotial differentiation in Rhizoctonia solani
159
Effect of the antioxidant BHT on reducing depletion of chlorothalonil in treated wood after 54 months of ground-contact exposure
160
Effect of the anti-oxidant probucol on soluble thrombomodulin (sTM) in hypercholesterolemic rabbits
161
Effect of the antioxidant probucol on transplant arteriosclerosis in aorta-allografted rabbits
162
Effect of the Aortic Root Infusion of Sufentanil on Ischemia-Reperfusion Injury in Patients Undergoing Coronary Artery Bypass Grafting: A Randomized Clinical Trial
163
Effect of the APOE promoter polymorphisms on cerebral amyloid peptide deposition in Alzheimerʹs disease
164
Effect of the apolipoprotein C-II/C-III1 ratio on the capacity of purified milk lipoprotein lipase to hydrolyse triglycerides in monolayer vesicles
165
Effect of the apoptosis rate observed in oocytes and cumulus cells on embryo development in prepubertal goats
166
Effect of the application of benzyladenine pulse on organogenesis, acclimatisation and endogenous phytohormone content in kiwi explants cultured under autotrophic conditions
167
Effect of the application of compost as an organic fertilizer on a tomato crop (Solanum lycopersicum L.) produced in the field in the Lower Valley of the Río Negro (Argentina)
168
Effect of the application of dentin primers and a dentin bonding agent on the adhesion between the resin-modified glass-ionomer cement and dentin
169
Effect of the application of intermittent drying on Ilex paraguariensis quality and drying kinetics Original Research Article
170
Effect of the application of superphosphate on rare earthsʹ content in the soil
171
Effect of the application of thyme and lemon essential oils in packaging of minimally processed persimmon
172
Effect of the application of water hyacinth compost/vermicompost on the growth and flowering of Crossandra undulaefolia, and on several vegetables
173
Effect of the applied load on surface contact fatigue of dental filling materials
174
Effect of the applied load, sliding distance and oxidation on the dry sliding wear behaviour of Al–10Si/SiCp composites produced by vacuum infiltration technique
175
Effect of the Apulia air quality plan on PM10 and benzo(a)pyrene exceedances
176
Effect of the Aquatic Extract of Stevia on the Serum Level of Interleukin-6 in Streptozotocin-Nicotinamide Induced Diabetic Rats
177
Effect of the Aqueous and Hydro- Alcoholic Extracts of Viola odorata L. on Biochemical and Histologic Liver Parameters in Diabetic Wistar Rats
178
Effect of the aqueous extract of Foeniculum vulgare (fennel) on the kidney in experimental PCOS female rats
179
Effect of the Aqueous Extract of Gloriosa superba Linn (Langli) Roots on Reproductive System and Cardiovascular Parameters in Female Rats
180
Effect of the Artificial Night with Facilitated Tucking and Artificial Night Alone on the Physiological Indices of Premature Infants
181
Effect of the aryl group substituent in the dimerization of 3-arylisoxazoles to syn 2,6-diaryl-3,7-diazatricyclo[4.2.0.02,5]octan-4,8-diones induced by LDA
182
Effect of the ash on enzymatic hydrolysis of steam-exploded rice straw
183
Effect of the A-site cation on methane oxidation of perovskite-type (La1−xMx)CoO3 (M=Ca, Sr, and Ba)
184
Effect of the aspect ratio of rectangular channels on the heat transfer and hydrodynamics of paraffin slurry flow
185
Effect of the assumption of circular satellite orbit on the derivation of earthʹs atmospheric parameters from GPS radio occultation data
186
Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire
187
Effect of the asymmetry of dynamical electron diffraction on intensity of acquired EMCD signals
188
Effect of the asymmetry of dynamical electron diffraction on intensity of acquired EMCD signals
189
Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys
190
Effect of the Atoms in Outermost Layers upon Friction Behavior of Organized Molecular Films of Comb-polymers Containing Fluorocarbon Chains
191
Effect of the attractive forces in determining the critical point of a two-dimensional Lennard-Jones system
192
Effect of the attractive forces on the density change melting of 2D LJ fluids
193
Effect of the average particle size and the surface oxidation layer of silicon on the colloidal silica particle through direct oxidation
194
Effect of the axial halogen ligand on the substitution reactions of chromium(III) porphyrin complex
195
Effect of the axial ligands on the structure and reactivity of tin verdoheme in the ring opening process
196
Effect of the axial scraping velocity on enhanced heat exchangers
197
Effect of the B2O3 addition on the sintering behavior and microwave dielectric properties of Ba3(VO4)2–Zn1.87SiO3.87 composite ceramics
198
Effect of the Ba/Na ratio on the microstructure and dielectric properties of (BaO, Na2O)–Nb2O5–SiO2 glass–ceramics
199
Effect of the bainitic transformation temperature on retained austenite fraction and stability in Ti microalloyed TRIP steels
200
Effect of the bake-out regime on the recovery of properties of copper-based alloys and copper/steel joints
201
Effect of the bandwidth of high-frequency sounds (>8 kHz) on loudness
202
Effect of the basal plane orientation on Al and Zn diffusion in hcp Mg
203
Effect of the basicity created by La2O3 addition on the catalytic properties of Co(O)/SiO2 in CH4 + CO2 reaction
204
Effect of the BASNEF Model on Maternal-Fetal Attachment in the Pregnant Women Referring to the Prenatal Clinics Affiliated to Shiraz University of Medical Sciences
205
Effect of the BASNEF-based Educational Intervention on the Prevention of Cutaneous Leishmaniasis Disease in the Volunteer HealthWorkers and Families Covered by Them: A Quasi-Experimental Prospective Study
206
Effect of the bee glue (propolis) on the calorimetrically measured metabolic rate and metamorphosis of the greater wax moth Galleria mellonella
207
Effect of the belt grinding on the surface texture: Modeling of the contact and abrasive wear
208
Effect of the better representation of the cloud ice-nucleation in WRF microphysics schemes: A case study of a severe storm in India
209
Effect of the bias voltage on the structure of nc-CrC/a-C:H coatings with high carbon content
210
Effect of the binding of bivalent ion to the calcium-binding site responsible for the thermal stability of actinomycete mannanase: Potential use in production of functional mannooligosaccharides
211
Effect of the binuclear Cu(II) complex interface layer on the calculation of electronic properties of Au/Cu(II) complex/n-Si organic–inorganic hybrid heterojunction
212
Effect of the biocontrol agent Pseudomonas fluorescens F113 released as sugarbeet inoculant on the nutrient contents of soil and foliage of a red clover rotation crop
213
Effect of the blank holder force on drawing of aluminum alloy square cup: Theoretical and experimental investigation
214
Effect of the blockage ratio on the flow in a channel with a built-in square cylinder
215
Effect of the Bolt Layout and Distance on Strength of the Composite Joints
216
Effect of the bonding ceramic material on the size of pores in porous ceramic materials
217
Effect of the Bone Graft on the Surface Microhardness of Endodontic Biomaterials
218
Effect of the boron content on the steam activation of boron-doped diamond electrodes Original Research Article
219
Effect of the bottom-contracted and edge-sloped vent-pipe on the cyclone separator performance
220
Effect of the bread making process on wheat flour contaminated by deoxynivalenol and exposure estimate
221
Effect of the breakdown nature on Er-related electroluminescence intensity and excitation efficiency in Si:Er light emitting diodes grown with sublimation MBE technique
222
Effect of the bridge substitution on the efficiency of dye-sensitized solar cells
223
Effect of the bridging unit in bis-(benzoxazolyl) titanium, zirconium and vanadium complexes on catalytic ethylene polymerization reactions
224
Effect of the brønsted acid site strength on the cracking and dehydrogenating properties in propane conversion evidence for the soft-soft/hard-hard acid-base interaction concept Original Research Article
225
Effect of the bubble size on the dynamic adsorption of frothers and collectors in flotation
226
Effect of the bubbling regimes on the performance and energy cost of flat sheet MBRs Original Research Article
227
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
228
Effect of the bulking agent on acid and alkaline phosphomonoesterase and β- -glucosidase activities during manure composting
229
Effect of the C/O ratio on the C60 and C70 formation rates in soot synthesised by laser pyrolysis of benzene-based mixtures
230
Effect of the cadmium ion source on the structural and optical properties of chemical hath deposited CdS thin films
231
Effect of the Ca-doping on the electrical conductivity of oxide ion conductor Yb2Ti2O7
232
Effect of the calcination conditions on the NOx storage behavior of the perovskite BaFeO3−x catalysts
233
Effect of the calcination temperature on Ni/MgAl2O4 catalyst structure and catalytic properties for partial oxidation of methane
234
Effect of the calcination temperature on the composition and microstructure of hydroxyapatite derived from human and animal bone
235
Effect of the calculation methods on body moment of inertia estimations in individuals of different morphology
236
EFFECT OF THE CALF RENNET PASTE ON SOME PHYSIOCHEMICAL AND MICROBIOLOGICAL PROPERTIES OF BUFFALO S PICKLED SOFT CHEESE
237
Effect of the carbohydrate side-chain on the conformation of a glycoconjugate polystyrene in aqueous solution Original Research Article
238
Effect of the carbon coating in Fe–C–TiO2 photocatalyst on phenol decomposition under UV irradiation via photo-Fenton process
239
Effect of the carbon dioxide modifier on the lipid composition of wool wax extracted from raw wool Original Research Article
240
Effect of the carbon dioxide pressure on the electrochemical behavior of 3Cr low alloyed steel at high temperature
241
Effect of the carbon ion energy on the microstructure of ta-C/Cr multilayers
242
Effect of the carbon oxidation state of biomass compounds on the relationship between GCV and carbon content
243
Effect of the carbon pre-treatment on the properties and performance for nitrobenzene hydrogenation of Pt/C catalysts Original Research Article
244
Effect of the Carbon Source Flow Rate on the Quality of the Growth of Super-Aligned Carbon Nanotube Arrays by the Chemical Vapor Deposition Method
245
Effect of the carbon support nano-structures on the performance of Ru catalysts in the hydrogenation of paracetamol Original Research Article
246
Effect of the carbonaceous matter deposition on the textural and surface properties of complex carbon-mineral adsorbents prepared on the basis of palygorskite
247
Effect of the carboxyl groups on the assembly of copper pyridinedicarboxylate complexes
248
Effect of the carboxylic acid groups on water sorption, thermal stability and dielectric properties of polyimide films
249
Effect of the carboxymethyl chitosan on removal of nickel and vanadium from crude oil in the presence of microwave irradiation
250
Effect of the carburization of MoO3-based catalysts on the activity for butane hydroisomerization Original Research Article
251
Effect of the carmine spider mite ( Acarida: Tetranychidae ) infestation and mechanical injury on the level of ABA in tomato plants
252
Effect of the carthamins yellow from Carthamus tinctorius L. on hemorheological disorders of blood stasis in rats
253
Effect of the casting process on microstructure and lifetime of the Al-piston-alloy AlSi12Cu4Ni3 under thermo-mechanical fatigue with superimposed high-cycle fatigue loading
254
Effect of the casting solvent on the crystal characteristics and pervaporative separation performances of P(VDF-co-HFP) membranes
255
Effect of the catalyst composition in the Ptx(Ru–Ir)1−x/C system on the electro-oxidation of methanol in acid media
256
Effect of the catalyst on the copolymers of styrene with methyl methacrylate by Ziegler–Natta polymerization
257
Effect of the catalyst properties on the performance of a reverse flow reactor for methane combustion in lean mixtures
258
Effect of the catalytic ink preparation method on the performance of high temperature polymer electrolyte membrane fuel cells
259
Effect of the catalytic ink preparation method on the performance of polymer electrolyte membrane fuel cells
260
Effect of the cathode gas diffusion layer on the water transport behavior and the performance of passive direct methanol fuel cells operating with neat methanol
261
Effect of the cathode/anode ratio and the choice of cathode catalyst on the performance of microbial fuel cell transducers for the determination of microbial activity
262
Effect of the cathodic polarization on structural and morphological proprieties of FTO and ITO thin films
263
Effect of the cation and anion of the ionic liquid on desulfurization of model fuels
264
Effect of the cationic composition of sorption solution on the quantification of sorption–desorption parameters of heavy metals in soils
265
Effect of the cationic starch on removal of Ni and V from crude oils under microwave irradiation
266
Effect of the CCAAT/Enhancer Binding Protein on Expression of the Gene for Chicken Malic Enzyme
267
Effect of the cell type and cell density on the binding of living cells to a silica particle: An atomic force microscope study
268
Effect of the cement chemistry and the sample size on ASR expansion of concrete exposed to salt
269
Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite
270
Effect of the central metal ion on the cleavage of DNA by [M(TPA)Cl]ClO4 complexes (M = CoII, CuII and ZnII, TPA = tris(2-pyridylmethyl)amine): An efficient artificial nuclease for DNA cleavage
271
Effect of the CeO2 content on the surface and structural properties of CeO2–Al2O3 mixed oxides prepared by sol–gel method Original Research Article
272
Effect of the ceramic mould composition on the surface quality of As-cast titanium alloy
273
Effect of the CH3OH/H2O ratio on the mechanism of the gas-phase photocatalytic reforming of methanol on noble metal-modified TiO2
274
Effect of the chain length on the excited state properties of α-naphthyl,ω-phenyl-polyenes: Photobehaviour of hexatrienes
275
Effect of the chain length on the thermal and analytical properties of laterally biforked nematogens
276
Effect of the characteristics of a superconductor on the levitation properties of the magnet-superconductor system
277
Effect of the Characteristics of Low-Temperature Plastic Deformation of Metals with bcc Lattice on the Stress-Strain State at the Tip of a Macrocrack
278
Effect of the charm quark mass on the BFKL γ∗γ∗ total cross section at LEP
279
Effect of the check ball and inlet position on hydraulic L-shaped check ball behavior
280
Effect of the chelate ring size on the cleavage activity of DNA by copper(II) complexes containing pyridyl groups
281
Effect of the chelating agent contents on the topography, composition and phase of SPPS-deposited cobalt ferrite splats
282
Effect of the chemical composition of smectites used in KF/Clay catalysts on soybean oil transesterification into methyl esters
283
Effect of the chemical composition on the catalytic performance of MgyAlOx catalysts for alcohol elimination reactions
284
Effect of the chemical composition on the sensing properties of In2O3–SnO2 nanoparticles synthesized by a non-aqueous method
285
Effect of the chemical composition to martensitic transformation in Ni–Mn–Ga–Fe alloys
286
Effect of the chemical composition to martensitic transformation in Ni–Mn–Ga–Fe alloys
287
Effect of the chemical compounds of soil on the stability of excavation wall: A case study
288
Effect of the chemical environment on the light-induced degradation of a photochromic dye in ormosil thin films
289
Effect of the chemical modifications of thiophene-based N3 dyes on the performance of dye-sensitized solar cells: A density functional theory study
290
Effect of the chemical nature and concentration of palladium (II) precursors on the palladium deposition by atomic hydrogen electrochemically assisted
291
Effect of the chemical nature of fixed-bed reactor support materials on bioreactor performance and biomass accumulation
292
Effect of the chemical reaction and radiation absorption on the unsteady MHD free convection flow past a semi infinite vertical permeable moving plate with heat source and suction
293
Effect of the chemical structure of the polymer matrix on the properties of foam polyurethanes at low temperatures
294
Effect of the chemical structure of various diamines on the gas separation of thermally rearranged poly(benzoxazole-co-imide) (TR-PBO-co-I) membranes
295
Effect of the chemical structures of iron complexes on the solubilities in supercritical carbon dioxide
296
Effect of the chemical vapor deposition environment on the faceted surface of α-(0 0 0 1) sapphire
297
Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys
298
Effect of the cholecystokinin-B receptor antagonist L-365,260 on lactate-induced panic attacks in panic disorder patients
299
Effect of the cholesteryl ester transfer protein inhibitor, anacetrapib, on lipoproteins in patients with dyslipidaemia and on 24-h ambulatory blood pressure in healthy individuals: two double-blind, randomised placebo-controlled phase I studies
300
Effect of the cholinergic system of the lateral periaqueductal gray (lPAG) on blood pressure and heart rate in normal and hydralazine hypotensive rats
301
Effect of the circumferential hydrides on the deformation and fracture of Zircaloy cladding tubes
302
Effect of the Circumferential Position of Balance Holes on the Cavitation Performance and Cavitation Erosion of Centrifugal Pump
303
Effect of the citrate sol–gel synthesis on the formation of MgAl2O4 ultrafine powder
304
Effect of the citrate sol–gel synthesis on the formation of MgAl2O4 ultrafine powder
305
Effect of the Cl− content on the formation and dissolution of precipitates in a soda–lime–silica glass
306
Effect of the clearance and interference-fit on failure of the pin-loaded composites
307
Effect of the clinker composition on the threshold limits for Cu, Sn or Zn
308
Effect of the CO coverage on the Fischer–Tropsch synthesis mechanism on cobalt catalysts
309
Effect of the co-administration of phenobarbital, quercetin and mancozeb on nitrosomethylurea-induced pancreatic tumors in rats
310
Effect of the co-application of olive waste-based compost and biochar on soil fertility and Zea mays agrophysiological traits
311
Effect of the coarse aggregate size on pipe flow of pumped concrete
312
Effect of the Coating Formulation on the Barrier Properties and Final Appearance of Non-wettable Hybrid Paper Sheets
313
EFFECT OF THE COATING THICKNESS AND COMPOSITION ON THE PROCESS OF LASER DOPING
314
EFFECT OF THE COATING THICKNESS AND COMPOSITION ON THE PROCESS OF LASER DOPING
315
Effect of the coexistence of nitrogen compounds on the sulfur tolerance and catalytic activity of Pd and Pt monometallic catalysts supported on high-silica USY zeolite and amorphous silica Original Research Article
316
Effect of the collector voltage on the stability of the cone-jet mode in electrohydrodynamic spraying
317
Effect of the Colorado River Diversion on Matagorda Bay Epifauna
318
Effect of the Colorless non-ripening Mutation on Cell Wall Biochemistry and Gene Expression during Tomato Fruit Development and Ripening
319
Effect of the combination of enamel matrix derivatives and deproteinized bovine bone materials on bone formation in rabbits’ calvarial defects
320
Effect of the combination of two bronchodilators on breathlessness in patients with chronic obstructive pulmonary disease. A crossover clinical trial
321
Effect of the combined physical and chemical treatments with microbial fermentation on corn straw degradation
322
Effect of the combined probiotics with aflatoxin B1-degrading enzyme on aflatoxin detoxification, broiler production performance and hepatic enzyme gene expression
323
Effect of the combined supplementation of diets with increasing levels of fish and linseed oils on yolk fat composition and sensorial quality of eggs in laying hens
324
Effect of the combined treatment of insecticides and an attractant for the control of Phloeotribus scarabaeoides, a pest of Olea europea
325
Effect of the combined treatments of high hydrostatic pressure and temperature on Zygosaccharomyces bailii and Listeria monocytogenes in smoothies
326
Effect of the Combined use of Cereal Brans and Digestive Regulators on the Performances of Post-Weaning Rabbits
327
Effect of the combined use of Metarhizium anisopliae (Metschinkoff) Sorokin and diatomaceous earth for the control of three stored-product beetle species
328
Effect of the combustion model and kinetic mechanism on the MILD combustion in an industrial burner fed with hydrogen enriched fuels
329
Effect of the Commercial Mixed Live Newcastle Disease and Infectious Bronchitis Vaccines and the Use of Two Separate Vaccines Given Simultaneously on Systemic Antibody Responses
330
Effect of the comonomer content on the permeation behavior in polyolefin films synthesized with metallocene catalysts
331
Effect of the compact Ti layer on the efficiency of dye-sensitized solar cells assembled using stainless steel sheets
332
Effect of the compensating cation on the adsorption of t-butylchloride on zeolite Y Original Research Article
333
Effect of the competition between relaxation and core hole decay on the Auger-photoelectron coincidence spectroscopy (APECS) spectrum of Ni metal
334
Effect of the competition of copper and cobalt on the lability of Ni(II)–organic ligand complexes, Part II: in freshwaters (Rideau River surface waters) Original Research Article
335
Effect of the competition of copper and cobalt on the lability of Ni(II)–organic ligand complexes. Part I. In model solutions containing Ni(II) and a well-characterized fulvic acid Original Research Article
336
Effect of the competitive adsorbates on the catalytic performances of PtSnK/γ-Al2O3 catalyst for isobutane dehydrogenation
337
Effect of the complexation with cyclodextrins on the in vitro antiviral activity of ganciclovir against Human Cytomegalovirus Original Research Article
338
Effect of the composite photoactivation mode on microtensile bond strength and Knoop microhardness
339
Effect of the composition and concentration of fibrous wastes from linen yarn production on the physicomechanical properties of polyolefin composites
340
Effect of the composition and porosity of sintered titanium nanolaminates on their mechanical properties at high temperatures
341
Effect of the composition and process on the Nd1Ba2Cu3Oy bulk properties in oxygen-controlled melt growth synthesis
342
Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia–alumina composites
343
Effect of the composition and sintering process on the electrical properties in Pb(Mg1/3 Nb2/3)O3–PbTiO3 ceramics
344
Effect of the composition and structure of titanosilicas on their photocatalytic activity in the decomposition of methylene blue
345
EFFECT OF THE COMPOSITION AND STRUCTURE OF TITANOSILICAS ON THEIR PHOTOCATALYTIC ACTIVITY IN THE DECOMPOSITION OF METHYLENE BLUE
346
Effect of the composition of hydroxyapatite/bioactive glass nanocomposite foams on their bioactivity and mechanical properties
347
Effect of the composition of lecithin/n-propanol/isopropyl myristate/water microemulsions on barrier properties of mice skin for transdermal permeation of tetracaine hydrochloride: In vitro
348
EFFECT OF THE COMPOSITION OF Mn-, Co- AND Ni-CONTAINING PEROVSKITES ON THEIR CATALYTIC PROPERTIES IN THE OXIDATIVE COUPLING OF METHANE
349
EFFECT OF THE COMPOSITION OF MODIFIED SO4 2^-/ZrO2 ON CATALYTIC PROPERTIES IN REDUCTION OF NO BY HYDROCARBONS
350
Effect of the Composition of Modified SO42−/ZrO2 on Catalytic Properties in Reduction of NO by Hydrocarbons
351
EFFECT OF THE COMPOSITION OF NICKEL-CONTAINING COMPOSITES BASED ON STABILISED ZIRCONIA ON CATALYTIC ACTIVITY IN METHANE STEAM CONVERSION
352
Effect of the composition of pluronic copolymers on the interaction with hydrophilic modified ibuprofen
353
Effect of the Composition of Spinel-Type Ga2O3-Al2O3-ZnO Catalysts on Activity for the CH4-SCR of NO and Optimization of Catalyst Composition
354
Effect of the composition of the hot product stream in the quasi-steady extinction of strained premixed flames
355
EFFECT OF THE COMPOSITION OF TITANIUM–ZIRCONIUM OXIDE SYSTEMS ON THEIR PHOTOCATALYTIC ACTIVITY IN THE REDUCTION OF METHYLENE BLUE BY FORMALDEHYDE
356
Effect of the compositional distribution on the photovoltaic power conversion of SiGe solar cells
357
Effect of the compression molding parameters on the in-plane and through-plane conductivity of carbon nanotubes/graphite/epoxy nanocomposites as bipolar plate material for a polymer electrolyte membrane fuel cell
358
Effect of the compression ratio on wear properties of slightly cross-linked ultra-high molecular weight polyethylene, crystallized under uniaxial compression
359
Effect of the Concentration Levels of Growth Hormone and Insulin-like Growth Factor I on the Polymorphisms of the Il12p40 Gene in Lung Cancer Patients
360
Effect of the concentration of inherent mineral elements on the adsorption capacity of coconut shell-based activated carbons
361
Effect of the concentration of ionogenic groups in the sorbent on the separation of protein mixtures
362
Effect of the concentration of sodium acetate (SA) on crosslinking of chitosan fiber by epichlorohydrin (ECH) in a wet spinning system
363
Effect of the concrete compressive strength and tensile reinforcement ratio on the flexural behavior of fibrous concrete beams
364
Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes
365
Effect of the condensing coverʹs slope on internal heat and mass transfer in distillation: an indoor simulation Original Research Article
366
Effect of the conditioning of CBN wheels on the technological results of HS 6-5-2 steel grinding
367
Effect of the conformation of the alkyl chain on the catalytic miniemulsion copolymerization of ethylene and acrylates
368
Effect of the conformational transitions on electron transfer in biological systems
369
Effect of the conserved oligosaccharides of recombinant monoclonal antibodies on the separation by protein A and protein G chromatography
370
Effect of the Consolute Point of Isobutyric Acid+Water on the Rate of an SN1 Hydrolysis Reaction
371
Effect of the consumption of high energy dense and fortified gruels on energy and nutrient intakes of 6–10-month-old Vietnamese infants
372
Effect of the content of ball-milled expanded graphite on the bending and tribological properties of copper–graphite composites
373
Effect of the content of EVA on the dispersing status and properties of polyesteramide/EVA blend
374
Effect of the content of EVA on the dispersing status and properties of polyesteramide/EVA blend
375
Effect of the content of hydroxyapatite nanoparticles on the properties and bioactivity of poly(l-lactide) – Hybrid membranes
376
EFFECT OF THE CONTENT OF IRON ORE FINES IN THE CHARGE ON THE MAIN INDICES OF THE BLAST-FURNACE PROCESS
377
Effect of the content of urea groups on the particle size in water-borne polyurethane or polyurethane\polyacrylate dispersions
378
Effect of the Continuity Self-Preservation Model on Compliance with the Care-treatment Regimen and Its Consequences in Patients with Type 2 Diabetes
379
Effect of the continuous and pulse in situ iron addition onto the performance of an integrated electrochemical–ozone reactor for wastewater treatment
380
Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation Original Research Article
381
Effect of the Control Mechanism on Orientation (Case Study: Managers and Deputies of Esfahan Social Security Organization
382
Effect of the conversion of grassland to spring wheat field on the CO2 emission characteristics in Inner Mongolia, China
383
Effect of the conversion of grassland to spring wheat field on the CO2 emission characteristics in Inner Mongolia, China
384
Effect of the co-occurring olive oil and thyme extracts on the phenolic bioaccesibility and bioavailability assessed by in vitro digestion and cell models
385
Effect of the cooking on physicochemical and starch digestibility properties of two varieties of common bean (Phaseolus vulgaris L.) grown under different water regimes
386
Effect of the cooling and reheating during coal pyrolysis on the conversion from char-N to NO/N2O
387
Effect of the cooling rate on the phase transformation of Astaloy CrL powders modified with SiC addition
388
Effect of the cooling rate on the thermoelectric properties of p-type (Bi0.25Sb0.75)2Te3 and n-type Bi2(Te0.94Se0.06)3 after melting in the bismuth–telluride system
389
Effect of the Coriolis Force on Thermal Convection under Microgravity
390
Effect of the Coulomb interaction for shot noise in a quantum dot
391
Effect of the counter-anion type and concentration on the liquid chromatography retention of β-blockers
392
Effect of the counterface material on the fretting behaviour of sputtered WSiN coatings
393
Effect of the counterion behavior on the frictional–compressive properties of chondroitin sulfate solutions
394
Effect of the counterions on the surface properties of surfactant solutions: kinetics of the surface tension and surface potential
395
Effect of the COVID-19 Pandemic on Interest in Home-Based Exercise: An Application of Digital Epidemiology
396
Effect of the COVID-19 Pandemic on Seizure Control Status in Patients with Epilepsy
397
Effect of the Cr content on the mechanical properties of nanostructured TiN/CrN coatings
398
Effect of the Cr2O3 coating on electrochemical properties of spinel LiMn2O4 as a cathode material for lithium battery applications
399
Effect of the crab waist and of the micro-beta on the beam–beam instability
400
Effect of the crab waist and of the micro-beta on the beam–beam instability
401
Effect of the crack length on the piezoelectric damage monitoring of glass fiber epoxy composite DCB specimens
402
Effect of the crack position in the cement mantle on the fracture behavior of the total hip prosthesis
403
Effect of the cross-linked reagent type on some morphological, physicochemical and functional characteristics of banana starch (Musa paradisiaca)
404
Effect of the cross-linked reagent type on some morphological, physicochemical and functional characteristics of banana starch (Musa paradisiaca)
405
Effect of the cross-linker on the general performance and temperature dependent behaviour of a molecularly imprinted polymer catalyst of a Diels–Alder reaction
406
Effect of the crosslinking agent on porous networks formation of hema-based copolymers
407
Effect of the Crosslinking Between the Asphalt and Polyethylene on the Viscoelastic Properties of Polyethylene Melt Extruding Through Capillary
408
Effect of the cross-linking degree on the morphology of poly(NIPAAm-co-AAc) hydrogels
409
Effect of the cross-sectional shape of hat-type cross-sections on crash resistance of an “S”-frame
410
Effect of the Crude Extract of Coprophilous Fungi on Some Bacterial Species Isolated from Cases of Mastitis
411
Effect of the crystalline constitution of TiO2 substrates on the growth of ultrathin Mo layer
412
Effect of the crystalline constitution of TiO2 substrates on the growth of ultrathin Mo layer
413
Effect of the crystallinity of kaolinite precursors on the properties of mesoporous silicas
414
Effect of the crystallite size in the structural and textural properties of sulfated and phosphated titania
415
Effect of the crystallization of a solute on the cohesion in granular materials
416
Effect of the crystallization of bioactive glass reinforcing agents on the mechanical properties of polymer composites
417
Effect of the crystallization of bioactive glass reinforcing agents on the mechanical properties of polymer composites
418
Effect of the cultural-social factors in selecting of the mobile hand phone in cities of Ardabil province
419
Effect of the culture media optimization, pH and temperature on the biohydrogen production and the hydrogenase activities by Klebsiella pneumoniae ECU-15
420
Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy
421
Effect of the curing conditions on the properties of an acrylic denture base resin microwave-polymerised
422
Effect of the curing temperature on the creep of a hardened cement paste
423
Effect of the current density on the volume expansion of the deposited thin films of aluminum during porous oxide formation
424
Effect of the cut-off radius of the intermolecular potential on phase equilibrium and surface tension in Lennard–Jones systems
425
Effect of the Cutting Edge Radius and its Manufacturing Procedure, on the Milling Performance of PVD Coated Cemented Carbide Inserts
426
Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels
427
Effect of the cyanide-producing bacterium Chromobacterium violaceum on ultraflat Au surfaces
428
EFFECT OF THE CYANOBACTERIAL METABOLITE GEOSMIN ON GROWTH OF A GREEN ALGA
429
EFFECT OF THE CYANOBACTERIAL METABOLITE GEOSMIN ON GROWTH OF A GREEN ALGA
430
Effect of the cylinder shape of a long-coned cyclone on the stable flow-field establishment
431
Effect of the Cylindrical Reinforcing Element’s Filling Materials on the Soil’s Resistance
432
Effect of the dangling bond on the electronic and magnetic properties of BN nanoribbon Original Research Article
433
Effect of the Darcy number on the energy flow and operating conditions of a thermoacoustic porous-medium system
434
Effect of the dates of extraction on the quality of potato pulp
435
Effect of the defect concentration on the impact fatigue endurance of untreated and alkali treated jute–vinylester composites under normal and liquid nitrogen atmosphere
436
Effect of the defects on the optical and electronic properties of plasma polymerized organic thin films
437
Effect of the degree of branching on the glass transition temperature of polyesters
438
Effect of the Degree of Comminution on Sensory and Texture Attributes of Lowfat Beefburgers
439
Effect of the degree of cure on the viscoelastic properties of vinyl ester resins
440
Effect of the degree of deacetylation on the thermal decomposition of chitin and chitosan nanofibers
441
Effect of the degree of deacetylation on the thermal decomposition of chitin and chitosan nanofibers
442
Effect of the degree of grafting in hydrophobically modified inulin polymeric surfactants on the steric forces in foam and oil-in-water emulsion films
443
Effect of the degree of oxidation on the physicochemical and biological properties of Grifola frondosa polysaccharides
444
Effect of the degree of soft and hard segment ordering on the morphology and mechanical behavior of semicrystalline segmented polyurethanes
445
Effect of the degree of sulfation on the physicochemical and biological properties of Pleurotus eryngii polysaccharides
446
Effect of the Degree of Udder Contamination in Dairy Cows on the Somatic Cell Count in Milk
447
Effect of the degree of unsaturation of biodiesel fuels on the exhaust emissions of a diesel power generator
448
Effect of the delivery system on the biodistribution of Ge(IV) octabutoxy-phthalocyanines in tumour-bearing mice
449
Effect of the delta-aminolevulinic acid dehydratase gene polymorphism on renal and neurobehavioral function in workers exposed to lead in China Original Research Article
450
Effect of the density of the C18 surface coverage on the adsorption mechanism of a cationic compound and on the silanol activity of the stationary phase in reversed phase liquid chromatography
451
Effect of the deposition conditions on the morphology and bonding structure of SiCN films
452
Effect of the deposition gas pressure on the structure and mechanical stability of sputtered amorphous carbon nitride films
453
Effect of the deposition parameters on the properties of the two-layer surface coatings obtained using magnetron sputtering
454
Effect of the deposition time on the electrocatalytic activity of Pt/C catalyst electrodes prepared by pulsed electrophoresis deposition method
455
Effect of the depreciation of public goods in spatial public goods games
456
Effect of the depth of the submerged entry nozzle in the mold on heat, flow and solution transport in double-stream-pouring continuous casting
457
Effect of the design parameters on the in vitro wear performance of total shoulder arthroplasties
458
Effect of the detergent Tween-20 on the DNA affinity chromatography of Gal4, C/EBPα, and lac repressor with observations on column regeneration
459
Effect of the Detoxification on the Shrinkage Temperature and pH of Chromium Leather Waste, Another Promising Way for the Tannery Pollution
460
Effect of the development of notches and tension cracks on instability of limestone coastal cliffs in the Ryukyus, Japan
461
Effect of the diamagnetic interaction on the intensity of the radiation lines of an atom in a magnetic field
462
Effect of the Dielectric Barrier Discharge Plasma on the Optical Properties of SnO2 Thin Film
463
Effect of the dielectric layer with photo-controllable surface relief on liquid crystal devices
464
Effect of the dielectric transition on laser-induced phase explosion in metals
465
Effect of the dielectric-constant mismatch and magnetic field on the binding energy of hydrogenic impurities in a spherical quantum dot
466
Effect of the dietary fat type on arterial thrombosis tendency: systematic studies with a rat model
467
Effect of the dietary inclusion of dried oregano (Origanum vulgare L.) on the characteristics of milk from Holstein × Zebu cows
468
Effect of the dietary inclusion of the growth promoter avoparcin on the performance and carcass characteristics of growing quail
469
Effect of the dietary supplementation of essential oils from rosemary and artemisia on muscle fatty acids and volatile compound profiles in Barbarine lambs
470
Effect of the Different High Volume Fraction of SiC Particles on the Junction of Bismuthate Glass-SiCp/Al Composite
471
Effect of the diffuse double layer on the interpretation of EQCM results in dilute NaClO4 solutions
472
Effect of the diisocyanate and chain extenders on the properties of the cross-linked polyetherurethane elastomers
473
Effect of the diluents on the synergistic solvent extraction of some lanthanides with thenoyltrifluoroacetone and quaternary ammonium salt
474
Effect of the dilution in polypropylene on photophysical properties of poly(3-alkylthiophenes)
475
Effect of the direction of ester linkage on molecular shape selectivity through multiple carbonyl–π interaction with octadecyl chain branched polymers as organic phases in reversed-phase high-performance liquid chromatography
476
Effect of the dislocation emergence on the mechanical behavior of coated materials: Elastic energy relaxation or adhesion modification
477
Effect of the dislocations on the kinetics of a martensitic transition: MD simulation of bcc–hcp transformation in Zr
478
Effect of the dislocations on the kinetics of a martensitic transition: MD simulation of bcc–hcp transformation in Zr
479
Effect of the dispersibility of ZrO2 nanoparticles in Ni–ZrO2 electroplated nanocomposite coatings on the mechanical properties of nanocomposite coatings
480
Effect of the dispersion of nanometric silica particles on the thermal stability of a nanostructured iron based powder
481
Effect of the dispersive method in the preparation of the polyurethane/hydrotalcite nanocomposites by in situ polymerization
482
Effect of the displacement damage from argon ion irradiation on the synergistic effect of helium–hydrogen in tungsten
483
Effect of the distal C162S mutation on the energetics of drug binding to p38α MAP kinase
484
Effect of the distribution of adsorbed proteins on cellular adhesion behaviors using surfaces of nanoscale phase-reversed amphiphilic block copolymers
485
Effect of the domain spanwise periodic length on the flow around a circular cylinder
486
Effect of the domain spanwise periodic length on the flow around a circular cylinder
487
Effect of the dome on divertor performance in ITER
488
Effect of the dopamine D3 receptor antagonist GSK598809 on brain responses to rewarding food images in overweight and obese binge eaters
489
Effect of the dopant content on the physical properties of Y2O3–ZrO2 and CaO–ZrO2 thin films produced by evaporation and sputtering techniques
490
Effect of the dopant content on the physical properties of Y2O3–ZrO2 and CaO–ZrO2 thin films produced by evaporation and sputtering techniques
491
Effect of the dopant nature on the conductivity of oxygen overstoichiometric oxyapatites with controlled microstructures
492
EFFECT OF THE DOPANT NATURE ON THE RESPONSE OF SENSOR ARRAYS BASED ON POLYPYRROLE
493
Effect of the doping concentration on the properties of silicon nanowires
494
Effect of the doping medium on blends of polyurethane and polyaniline
495
Effect of the -doping on the electron transport in a structure modulated by the magnetic barriers
496
Effect of the drift field on avalanche gain and charge collection in microgap detectors at high pressure
497
Effect of the drift field on avalanche gain and charge collection in microgap detectors at high pressure
498
Effect of the drift gap between the undulator sections on the operation of the Fusion-FEM
499
Effect of the drift gap between the undulator sections on the operation of the Fusion-FEM
500
Effect of the drilling process on the compression behavior of glass/epoxy laminates
501
Effect of the driving pressure on the rate of thinning of microscopic foam films
502
Effect of the dry nanodispersion procedure in the magnetic order of the Co3O4 surface
503
Effect of the dry-heating conditions on the glycosylation of β-lactoglobulin with dextran through the Maillard reaction
504
Effect of the drying techniques on the morphology of silica nanoparticles synthesized via sol–gel process
505
Effect of the DTwP Haemophilus influenzae b Conjugate Vaccination in Mexico (1999–2007)
506
Effect of the duration of protease inhibitor therapy in HIV‑infected individuals on the severity of obstructive sleep apnea
507
Effect of the duty ratio on the indium tin oxide (ITO) film deposited by in-line pulsed DC magnetron sputtering method for resistive touch panel
508
Effect of the DVE and OEB value changes of grain legumes (lupin and faba beans) after roasting on the performance of lambs fed a roughage-based diet
509
Effect of the earthworm Lumbricus rubellus on the nematode community in a peat meadow soil
510
Effect of the E-Book of Family Planning Services Guide on the Knowledge of Women of Childbearing Age
511
EFFECT OF THE ECOLOGICAL SYSTEM ON LETTUCE PRODUCTION GROWN UNDER DIFFERENT SOILLESS SYSTEMS
512
Effect of the Educational Pamphlet on the Quality of Multiple-Choice Questions
513
Effect of the Educational Program Based on the Planned Behaviour Theory on Breakfast Consumption of the High School Students
514
Effect of the Elastic Modulus of a Coating on the Serviceability of the Substrate–Coating System
515
Effect of the elasticity formulation in finite strain on springback prediction
516
Effect of the elective surgical schedule on daily emergency department throughput time
517
Effect of the electric conductivity on the modeling of the poling process of ferroelectric components
518
Effect of the electric current on the friction and wear properties of the CNT–Ag–G composites Original Research Article
519
Effect of the electric field on the primary scintillation from CF4
520
Effect of the electric field on the primary scintillation from CF4
521
Effect of the electrical discharge machining on strength and reliability of TiN/Si3N4 composites
522
Effect of the electrochemical oxidation/reduction cycle on the electrochemical capacitance of graphite oxide
523
Effect of the Electrode Bore Angle on the Two-Electrode Electrostatic Immersion Lens Design
524
Effect of the electrolyte cations and anions on the photocurrent of dodecylsulphate doped polypyrrole films
525
Effect of the electrolyte nature on the electrochemical doping of poly-3-phenylthiophene
526
Effect of the electrolyte on the electrochemical behavior of C60 fullerene films in dimethylformamide + water mixtures
527
Effect of the electrolytic solution composition on the performance of micro-arc anodic oxidation films formed on AM60B magnesium alloy
528
Effect of the electron population on intraband absorption in InAs/GaAs self-assembled quantum dots
529
Effect of the electron transport through thin slabs on the simulation of linear electron accelerators of use in therapy: A comparative study of various Monte Carlo codes
530
Effect of the electron transport through thin slabs on the simulation of linear electron accelerators of use in therapy: A comparative study of various Monte Carlo codes
531
Effect of the electron-acceptors on the performance of a MFC
532
Effect of the electronic and physicochemical parameters on the carcinogenesis activity of some sulfa drugs using QSAR analysis based on genetic-MLR and genetic-PLS Original Research Article
533
Effect of the electronic coupling in dinucleotides and oligonucleotides of adenine and thymine from synchrotron radiation absorption and circular dichroism
534
Effect of the electronic structure on CO oxidation on Pd doped Ag(1 1 1)
535
Effect of the electronic subsystem excitation on the ionisation probability of atoms sputtered from metals by atomic and molecular projectiles
536
Effect of the elevated temperature on the local structure of lithium manganese oxide studied by in situ XAFS analysis
537
Effect of the Eley–Rideal step on catalytic oxidation of CO under periodic external pressure
538
Effect of the eluent on enantiomer separation of controlled drugs by liquid chromatography–ultraviolet absorbance detection–electrospray ionisation tandem mass spectrometry using vancomycin and native β-cyclodextrin chiral stationary phases
539
Effect of the eluent pH and acidic modifiers in high-performance liquid chromatography retention of basic analytes
540
Effect of the endcapping of reversed-phase high-performance liquid chromatography adsorbents on the adsorption isotherm
541
Effect of the endocrine disrupter nonylphenol on the marine copepod Tisbe battagliai
542
Effect of the endogeic earthworm Pontoscolex corethrurus on soil chemical characteristics and plant growth in a low-input tropical agroecosystem
543
Effect of the endogeic earthworm Pontoscolex corethrurus on soil chemical characteristics and plant growth in a low-input tropical agroecosystem
544
Effect of the Energy Drink Bison on Mitosis And Nucleic Acids Content In Vicia faba
545
Effect of the entrance channel on the synthesis of superheavy elements
546
Effect of the environment on the hydroxyl density of α-quartz (1 1 1)
547
Effect of the environment on the physiology of the sow during late pregnancy, farrowing and early lactation
548
Effect of the Environment on the Reactivity of 4′-Substituted Flavones and Isoflavones
549
Effect of the environment on tris(2-phenylpyridine) iridium molecules embedded in a polyvinyl carbazole matrix
550
Effect of the environment temperature on the chloride diffusion through CEM-I and CEM-V mortars: An experimental study
551
Effect of the environmental atmosphere on heat, water and gas transfer within hygroscopic fabrics
552
Effect of the environmental conditions on essential oil profile in two Dinaric Salvia species: S. brachyodon Vandas and S. officinalis L.
553
Effect of the epoxycyclohexyl polyhedral oligomeric silsesquioxane content on the dynamic fragility of an epoxy resin
554
Effect of the equilibria of multivalent metal sulfates on the transport through cation-exchange membranes at different current regimes
555
EFFECT OF THE EQUIVALENCE RATIO ON THE CONCENTRATION OF CH4/NO2/O2 COMBUSTION PRODUCTS
556
EFFECT OF THE EQUIVALENCE RATIO ON THE CONCENTRATION OF CH4/NO2/O2 COMBUSTION PRODUCTS
557
Effect of the equivalence ratio, Damkِhler number, Lewis number and heat release on the stability of laminar premixed flames in microchannels
558
Effect of the error in lineof sight unit vector on the accuracy of GPS and pseudolite navigation system
559
Effect of the E-selectin Gene Polymorphism (S149R) on Platelet Activation and Adverse Events After Coronary Artery Surgery
560
Effect of the Essential Oil Composition and Biological Activity of Ziziphora clinopodiodes Lam. on the Against Anopheles Stephensi and Culex pipiens Parva from Iran
561
Effect of the estrus cycle stage on the establishment of murine endometriosis lesions
562
Effect of the ethanol extract of Pereskia bleo (Kunth) DC. on the blood pressure and electrolyte levels of hypertensive rats
563
Effect of the Ethanolic Extract of
Salvia officinalis
on Ovarian Angiogenesis in Mice at Preimplantation: A Morphological and Molecular Analysis
564
Effect of the Euphotic Depth and Mixing Depth on Phytoplanktonic Growth Mechanism
565
Effect of the europium doping on the structural and luminescent properties of yttrium aluminum garnet
566
Effect of the eutectic phase mixture on the anodic behavior of alloy AZ91
567
Effect of the evolution of phenol–formaldehyde resin on the high-temperature bonding
568
Effect of the excess of bismuth on the morphology and properties of the BaBi2Nb2O9 thin films
569
Effect of the Exercise Classics for the Development of Memory in Children at Lessons of Physical Culture
570
Effect of the existing air pollutant control devices on mercury emission in coal-fired power plants
571
Effect of the exotic invasive plant Solidago gigantea on soil phosphorus status
572
Effect of the exotic plant Spartina alterniflora on macrobenthos communities in salt marshes of the Yangtze River Estuary, China
573
Effect of the expansion associated with the plutonium α–β–γ phase transitions on storage can integrity
574
Effect of the experimental parameters on the number of free electrons in the drift region of a wire-cylinder electrostatic precipitator
575
Effect of the experimental parameters on the structure of nitrogen-doped carbon nanotubes produced by aerosol chemical vapour deposition Original Research Article
576
Effect of the extent and structure of upd adlayers on the reduction of 2-nitroimidazole on Au(111) in acidic solutions
577
Effect of the extent of oxidation of activated carbons by O2 and HNO3 on the acidity and composition of surface functional groups and their ion-exchange properties
578
Effect of the extent of pasting on the dynamic rheological properties of acidified skim milk gels containing normal rice starch
579
EFFECT OF THE EXTENT OF REDUCTION OF V2O5 ON THE ADSORPTION OF PROPYLENE AND THE OXIDATIVE DEHYDROGENATION OF PROPANE TO GIVE PROPYLENE ON V2O5 AND V2O5/TiO2-SiO2
580
Effect of the extent of thiolation and introduction of phosphorothioate internucleotide linkages on the anti-HIV activity of Suligovir [(s4dU)35]
581
Effect of the extract of the tamarind (Tamarindus indica) fruit on the complement system: Studies in vitro and in hamsters submitted to a cholesterol-enriched diet
582
Effect of the extraction method on phytochemical composition and antioxidant activity of high dietary fibre powders obtained from asparagus by-products
583
EFFECT OF THE EXTRINSIC AND TEMPORAL CARRIERS ON RADIATIVE RECOMBINATION OF III-NITRIDE NANOSTRUCTURES
584
Effect of the extrusion conditions on microstructure evolution of the extruded Al–Mg–Si–Cu alloy rods
585
Effect of the extrusion conditions on the texture and mechanical properties of indirect-extruded Mg–3Al–1Zn alloy
586
Effect of the fabrication process on fatigue performance of U3Si2 fuel plate with sandwich structure
587
Effect of the facade alternatives on the daylight illuminance in offices
588
Effect of the Family-Based Art Therapy Program on the Social Interactions, Verbal Skills and Stereotypic Behaviors of Children with Autism Spectrum Disorders (ASD)
589
Effect of the Family-based Art Therapy Program on the Social Interactions, Verbal Skills and Stereotypic Behaviors of Children with Autism Spectrum Disorders (ASD)
590
Effect of the farm operations for wheat cultivation in fish ponds on the growth performance and total yield of Nile tilapia (Oreochromis niloticus)
591
Effect of the fatigue data editing technique associated with finite element analysis on the component fatigue design period
592
Effect of the fattening diet on the development of the fatty acid profile in rabbits from weaning
593
Effect of the features of the low-energy spectrum of vibrational states in disordered systems on the probability of the Mössbauer effect and the Debye-Waller temperature factor
594
Effect of the feeding system on intramuscular fatty acids and conjugated linoleic acid isomers of beef cattle, with emphasis on their nutritional value and discriminatory ability
595
Effect of the feeding system on the fatty acid composition, expression of the Δ9-desaturase, Peroxisome Proliferator-Activated Receptor Alpha, Gamma, and Sterol Regulatory Element Binding Protein 1 genes in the semitendinous muscle of light lambs of the R
596
Effect of the fermentation of whole soybean flour on the conversion of isoflavones from glycosides to aglycones
597
Effect of the ferredoxin electron donor on sunflower (Helianthus annuus) desaturases
598
Effect of the fiber geometry on the pullout response of mechanically deformed steel fibers
599
Effect of the fiber orientation on the transient damping in metal matrix composites
600
Effect of the fiber orientation on the transient damping in metal matrix composites
601
Effect of the fiber orientation on the transient damping in metal matrix composites
602
Effect of the film thickness on the fabrication of ordered TiO2 thin film microstructures by transfer printing
603
Effect of the film-processing conditions, relative humidity and ageing on wheat gluten films coated with electrospun polyhydryalkanoate
604
Effect of the filter feeder Daphnia on the particle size distribution of inorganic colloids in freshwaters
605
Effect of the filter-feeder silver carp on the water quality of fertilized earthen ponds and Nile tilapia production
606
Effect of the final-state interaction on the initial core–hole lifetime: the case of the 4s-hole lifetime of Sn metal
607
Effect of the finite memory length of a recorder in evaluating its frequency response from step response
608
Effect of the fish oil, oxidation status and of heat treatment temperature on the volatile compounds of the produced fish feeds
609
Effect of the fit between information processing requirements and capacity on organizational performance
610
Effect of the flavonoid quercetin on cadmium-induced hepatotoxicity
611
effect of the flipped classroom approach and language proficiency on learner autonomy and foreign language anxiety
612
Effect of the Floor Level on the Probability of a Neurologically Favorable Discharge after Cardiac Arrest according to the Event Location
613
Effect of the flow rate on the measurement of adsorption data by dynamic frontal analysis
614
Effect of the fluoride additives on the oxidation of AlN
615
Effect of the fluoride content on the bioactivity of calcium silicate-based endodontic cements
616
Effect of the fluorination degree of hydrophobic chains on the monolayer behavior of unsaturated diacylphosphatidylcholines bearing partially fluorinated 9-octadecynoyl (stearoloyl) groups at the air–water interface
617
Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)
618
Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds Original Research Article
619
Effect of the form of data on the quality of mine tremors hazard forecasting using neural networks
620
Effect of the Fractional CO 2 Laser on the Quality of Life, General Health, and Genitourinary Symptoms in Postmenopausal Women With Vaginal Atrophy: A Prospective Cohort
621
Effect of the framework structure on the dealumination–realumination behavior of zeolite
622
Effect of The Free Water Content in Biodiesel On the Corrosion of Copper and AISI 1045 Steel: An Approach Using the Biodiesel/KOH-Solution Interface
623
Effect of the Frequency Content of Earthquake Excitation on Damage Detection in Steel Frames
624
Effect of the frequency on the gas sensing response of CoSb2O6 prepared by a colloidal method
625
Effect of the frequency spread on the transverse beam break-up instability of a bunch in storage rings
626
Effect of the frequency spread on the transverse beam break-up instability of a bunch in storage rings
627
Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
628
Effect of the front surface field on GaAs solar cell photocurrent
629
Effect of the FSW Tool Pin Profile on Mechanical Properties of the Al6061-Cu Plates Joint
630
Effect of the fuel type on the synthesis of yttria stabilized zirconia by combustion method
631
Effect of the Fukushima nuclear disaster on global public acceptance of nuclear energy
632
Effect of the full moon on mortality among patients admitted to the intensive care unit
633
Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact
634
Effect of the functional groups of carbon on the surface and catalytic properties of Ru/C catalysts for hydrogenolysis of glycerol
635
Effect of the Fundamentals of Laparoscopic Surgery Curriculum on Skills of Operating Room Technology Students: An Interventional Study
636
Effect of the fungal extracellular protease EPg222 on texture of whole pieces of pork loin
637
Effect of the fungal protease EPg222 on the sensory characteristics of dry fermented sausage “salchichón” ripened with commercial starter cultures
638
Effect of the fungus Pochonia chlamydosporia and fosthiazate on the multiplication rate of potato cyst nematodes (Globodera pallida and G. rostochiensis) in potato crops grown under UK field conditions
639
Effect of the fungus Pochonia chlamydosporia on Echinostoma paraensei (Trematoda: Echinostomatidae)
640
Effect of the G-308A polymorphism of the tumor necrosis factor α gene on the risk of ischemic heart disease and ischemic stroke: A meta-analysis
641
Effect of the Galápagos hotspot on seafloor volcanism along the Galápagos Spreading Center (90.9–97.6°W)
642
Effect of the gamma radiation on histamine production, lipid peroxidation and antioxidant parameters during storage at two different temperatures in sardine (Sardina pilchardus)
643
Effect of the gap distance on the cooling behavior and the microstructure of indirect squeeze cast and gravity die cast 5083 wrought Al alloy
644
Effect of the gap distance on the cooling behavior and the microstructure of indirect squeeze cast and gravity die cast 5083 wrought Al alloy
645
Effect of the gap distance on the cooling behavior and the microstructure of indirect squeeze cast and gravity die cast 5083 wrought Al alloy
646
Effect of the gap due to anion ordering in deuterated (TMTSF)2ClO4 at high magnetic fields
647
Effect of the gap size in the start-up free convective flow around a square prism near a wall
648
Effect of the Garlic Pill in comparison with Plavix on Platelet Aggregation and Bleeding Time
649
Effect of the gas contamination on CF4 primary and secondary scintillation
650
Effect of the gas contamination on CF4 primary and secondary scintillation
651
Effect of the gas mixture composition on high-temperature behavior of magnetron sputtered Si–B–C–N coatings
652
Effect of the gas state equation on the thermodynamic diagnostic of diesel combustion
653
Effect of the gasoline additives on PAH emission
654
Effect of the Gd substitution by Bi in the BixGd1−xVO4 catalysts on the catalytic behaviour of methanol oxidation Original Research Article
655
Effect of the gel form of eucalyptol on the shear bonding forces of orthodontic brackets
656
Effect of the Gender and Personal Characteristics Impact on OneHanded Isometric PushPull Exertions
657
Effect of the genistein metabolite on leptin secretion in murine adipocytes in vitro
658
Effect of the Genotype, Vermicompost Type and Dosage on Tomato Growth and Nutrient Uptake at Nursery Stage
659
EFFECT OF THE GEOMETRICAL PARAMETERS IN A DOMESTIC BURNER WITH CRESCENT FLAME CHANNELS FOR AN OPTIMAL TEMPERATURE DISTRIBUTION and THERMAL EFFICIENCY
660
Effect of the Geometrical Structure Of the Front Contact Probe on Series Resistance of CdTe/CdS Solar Cells
661
Effect of the geometries of current collectors on the power density in a solid oxide fuel cell
662
Effect of the geometry of a working electrode on the behavior of a planar amperometric NO2 sensor based on solid polymer electrolyte
663
Effect of the geometry of flattened tube on the thermal performance of a high temperature generator
664
Effect of the Geometry of the Working Chamber of a Cylindrical-Conical Hydrocyclone on the Non-Newtonian Fluid Dynamics
665
Effect of the geometry on the non-linear vibration of circular cylindrical shells
666
Effect of the glass composition on the chemical durability of zinc-phosphate-based glasses in aqueous solutions Original Research Article
667
Effect of the glass surface modification on the strength of methacrylate monolith attachment
668
Effect of the Global Alliance for Vaccines and Immunisation on diphtheria, tetanus, and pertussis vaccine coverage: an independent assessment
669
Effect of the global redox sensing/regulation networks on Escherichia coli and metabolic flux distribution based on C-13 labeling experiments
670
Effect of the glycaemic index on the anabolic hormone profile after resistance exercise
671
Effect of the glycemic index and content of indigestible carbohydrates of cereal-based breakfast meals on glucose tolerance at lunch in healthy subjects
672
Effect of the grain boundaries on the conductivity and current transport in II–VI films
673
Effect of the grain boundary on the evolution of deformation in a bicrystal
674
Effect of the grain size and chemical features on the phase transition and physical characteristics of nano-grained BaTiO3 ceramics
675
Effect of the grain size on the accumulation of damage in a metal subjected to plastic deformation
676
Effect of the grain size on the rate of energy storage during the tensile deformation of an austenitic steel
677
Effect of the grain size on the rate of energy storage during the tensile deformation of an austenitic steel
678
Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti–50 at%Ni alloy
679
Effect of the graphite electrode material on the characteristics of molten salt electrolytically produced carbon nanomaterials
680
Effect of the Gravity and Magnetic Field to Find Regular Precessions of a Satellite-gyrostat with Principal Axes on a Circular Orbit
681
Effect of the green porous texture on porcelain tile properties
682
Effect of the ground-state structure on order parameters in ±J Ising lattices
683
Effect of the growing area conditions on differentiation between Chemlali and Chétoui olive oils
684
Effect of the growth conditions on the synthesis of a recombinant β-1,4-endoglucanase in continuous and fed-batch culture
685
Effect of the growth environment on the strain variability of Salmonella enterica kinetic behavior Original Research Article
686
Effect of the Growth Rate of Pseudomonas aeruginosa Biofilms on the Susceptibility to Antimicrobial Agents: 3-Lactams and Fluoroquinolones
687
Effect of the growth sequence on the properties of InGaP/GaAs/InGaP quantum wells grown by LP-MOVPE from group-V metalorganic sources
688
Effect of the Guide Vane on the Hydraulic Stability of a Low-head, Large-discharge Industrial Hydraulic Turbine
689
Effect of the H, K–ATPase inhibitor, esomeprazole magnesium, on gut total antioxidant capacity in mice
690
Effect of the Haar measure on the finite temperature effective potential of SU(2) Yang-Mills theory
691
Effect of the Hanhin-Awaji earthquake on home blood pressure in patients with essential hypertension
692
Effect of the hard segment domains on the permeation and separation ability of the polyurethane-based membranes in benzene/cyclohexane separation by pervaporation
693
Effect of the header pressure drop induced flow maldistribution on the microchannel evaporator performance
694
Effect of the Health Promotion Plan on the Performance of Hospitals: Evidences from East of Iran
695
Effect of the Healthy Body Image Package and Cash Cognitive-Behavioral Therapy on Perfectionism in Adolescents with Body Dissatisfaction
696
Effect of the heat flux direction on electrical properties of SrBi2Nb2O9 thin films crystallized using a microwave oven
697
Effect of the heat transfer law on the finite-time, exergoeconomic performance of heat engines
698
Effect of the heat treatment on the behaviour of the corrosion and passivation of 3003 aluminium alloy in synthetic solution
699
Effect of the heat treatment on the corrosion behaviour of amorphous Fe–Cr–P–C–Si alloy in 0.5 M H2SO4
700
Effect of the heat treatment on the damping characteristics of the NiTi shape memory alloy
701
Effect of the heat treatment on the hot deformation behaviour of AA6082 alloy
702
Effect of the heat treatment on the infrared emissivity of indium tin oxide (ITO) films
703
Effect of the Heat Treatment Time on the Characteristics of the Coating Formed on Nanocrystalline Finemet Foils
704
Effect of the Heating Block Position on Natural Convection in a Three-Dimensional Cavity Filled with Nanofluids
705
Effect of the heating rate on crystallization behavior of mechanically alloyed amorphous alloy
706
Effect of the heating rate on the devolatilization of biomass residues
707
Effect of the height increasing on steel buildings retrofitted by buckling restrained bracing systems and TTD damper
708
Effect of the helmet act for motorcyclists in Thailand
709
Effect of the Hemoglobin-Based Oxygen Carrier HBOC-201 on Laboratory Instrumentation: Cobas Integra, Chiron Blood Gas Analyzer 840, Sysmex™SE-9000 and BCT
710
Effect of the hepatitis B virus HBx protein on integrin-mediated adhesion to and migration on extracellular matrix
711
Effect of the Herbicide Atrazine on the Bean Leaf Lipids
712
Effect of the herbicide butachlor on methane emission and ebullition flux from a direct-seeded flooded rice field
713
Effect of the herbicide flumioxazin on photosynthetic performance of grapevine (Vitis vinifera L.) Original Research Article
714
Effect of the Herbicide Glyphosate on Enzymatic Activity in Pregnant Rats and Their Fetuses
715
Effect of the herbicide pendimethalin on rat uterine weight and gene expression and in silico receptor binding analysis
716
Effect of the herbicides oxadiazon and oxyfluorfen on phosphates solubilizing microorganisms and their persistence in rice fields
717
Effect of the high magnetic field on the localization length in n-type Cooper Indium diselenide
718
Effect of the high pressure on the structure and intercalation properties of lithium–nickel–manganese oxides
719
Effect of the history term on the transient energy equation for a sphere
720
Effect of the HIV epidemic on liver cancer in Africa
721
Effect of the holding time at 15 °C prior to cryopreservation, the thawing rate and the post-thaw incubation temperature on the boar sperm quality after cryopreservation
722
Effect of the hole transport layer on photocarrier and transportation in the organic photo-electron conversion cell with a planar configuration
723
Effect of the Holy Month of Ramadan on Coping Strategies
724
Effect of the Holy Quran on the Physiological Responses in Premature Infants: A Review
725
Effect of the homogeneity of the column set on the performance of a simulated moving bed unit: I. Theory
726
Effect of the homogeneity of the column set on the performance of a simulated moving bed unit: II. Experimental study
727
Effect of the host cell line on the vaccine efficacy of an attenuated porcine reproductive and respiratory syndrome virus
728
Effect of the host cell line on the vaccine efficacy of an attenuated porcine reproductive and respiratory syndrome virus
729
Effect of the host plant on the efficacy of Verticillium chlamydosporium as a biological control agent of root-knot nematodes at different nematode densities and fungal application rates
730
Effect of the host plant on the efficacy of Verticillium chlamydosporium as a biological control agent of root-knot nematodes at different nematode densities and fungal application rates
731
Effect of the host plant on the survivorship of parasitized Chilo partellus Swinhoe (Lepidoptera: Crambidae) larvae and performance of its larval parasitoid Cotesia flavipes Cameron (Hymenoptera: Braconidae)
732
Effect of the hydroalcoholic extract and juice of Prunus divaricata fruit on blood glucose and serum lipids of normal and streptozotocin-induced diabetic rats
733
Effect of the Hydroalcoholic Extract from the Leafy Stems of Waltheria indica L. (Malvaceae) on Acetylcholine and Barium Chloride-Induced Contractions on Isolated Rat Tracheal Tissue
734
Effect of the Hydroalcoholic Extract of Heracleum persicum (Golpar) on Folliculogenesis in Female Wistar Rats
735
Effect of the hydroalcoholic extract of pistachio on avoidance learning in male Wistar rats
736
Effect of the Hydroalcoholic Extract of Winter Cherry Fruits (Physalis alkekengi) on Serum Lipid Profile and Paraoxonase Activity of Healthy Male Rats
737
Effect of the hydrochloric acid concentration on the hydrolysis of sorghum straw at atmospheric pressure Original Research Article
738
Effect of the Hydrodynamic Interaction of a Large Number of Particles on Their Sedimentation Rate in a Viscous Fluid
739
Effect of the hydrodynamic pressure on shaft torque for a 4-blades vane rheometer
740
Effect of the hydrogen bonding and content on the opto-electronic properties of radiofrequency magnetron sputtered hydrogenated amorphous silicon films
741
Effect of the hydrogen bonding on the inelasticity of thermoplastic polyurethane elastomers
742
Effect of the hydrogen content on the deformation behavior in the isothermal compression of Ti600 alloy
743
Effect of the hydrogen outgassing time on the hardness of austenitic stainless steels welds
744
Effect of the hydrophilic and hydrophobic characteristics of the gas diffusion medium on polymer electrolyte fuel cell performance under non-humidification condition
745
Effect of the hydrophilic surfactants on the preparation and encapsulation efficiency in course and fine W/O/W type emulsions
746
Effect of the hydrophilic α-tocopherol analog MDL 74,405 on detection of hydroxyl radicals in stunned myocardium in dogs
747
Effect of the hydrothermal alteration on the surface conductivity of rock matrix: Comparative study between relatively-high and low temperature hydrothermal systems
748
Effect of the hydrothermal pretreatment for the reduction of NO emission from sewage sludge combustion
749
Effect of the hydrothermal treatment, HCl purification and annealing temperature on the structure and the morphology of TiO2 nanotubes
750
Effect of the hydroxy group position on the monolayer characteristics of hydroxypalmitic acids
751
Effect of the hydroxyl content and molecular weight of polyvinyl butyral on tape properties
752
Effect of the Iberian pig line on dry-cured ham characteristics
753
Effect of the Iberian × Duroc reciprocal cross on productive parameters, meat quality and lipogenic enzyme activities
754
Effect of the icing with thyme, oregano and clove extracts on quality parameters of gutted and beheaded anchovy (Engraulis encrasicholus) during chilled storage
755
Effect of the image-doping on the electron transport in an antiparallel double image-magnetic-barrier nanostructure
756
Effect of the image-function potential on the electron transport in a magnetic nanostructure
757
Effect of the immersion in CdCl2 and annealing on physical properties of CdS:F films grown by CBD Original Research Article
758
Effect of the immobilization protocol in the activity, stability, and enantioslectivity of Lecitase® Ultra
759
Effect of the immobilization protocol on the properties of lipase B from Candida antarctica in organic media: Enantiospecifc production of atenolol acetate
760
Effect of the impact angle on the breakage of agglomerates: a numerical study using DEM
761
Effect of the impact energy of various peening techniques on the induced plastic deformation region
762
Effect of the impingement on the kinetics of island aggregation in the post-nucleation stage of film growth at solid surfaces
763
Effect of the implementation of cardiac triage scale on the time indices of patients with chest pain
764
Effect of the impregnated solute on air drying and rehydration of apple slices (cv. Granny Smith) Original Research Article
765
Effect of the in situ Cs treatment on field emission of a multi-walled carbon nanotube
766
Effect of the in vivo catalase inhibition on aminonucleoside nephrosis
767
Effect of the incident at Columbine on students’ violence- and suicide-related behaviors
768
Effect of the incident electron fluence on the electron emission yield of polycrystalline Al2O3
769
Effect of the inclusion of chestnut in the finishing diet on volatile compounds during the manufacture of dry-cured “Lacón” from Celta pig breed
770
Effect of the inclusion of food waste in pig diets on growth performance, carcass and meat quality
771
Effect of the inconsistency in accounting standards on the choice of financial instrume nts: The case of debt issued with stock purchase warrants and convertible debt by Japanese companies
772
Effect of the incorporation of a low amount of carbohydrate-containing monomer on the swelling properties of polyacrylamide hydrogels
773
Effect of the incorporation of a spent catalyst reject from the petroleum industry in clay products
774
Effect of the incorporation of antioxidants on physicochemical and antioxidant properties of wheat starch–chitosan films Original Research Article
775
Effect of the incorporation of chromating reagents in an acrylic lacquer applied on galvanised steel, galvanneal and galfan during the UVCON test
776
Effect of the incorporation of ETS-10 into alumina on metal-support interactions and hydrodesulfurization activity
777
Effect of the incorporation of interfacial elements on the thermophysical properties of Cu/VGCNFs composites
778
Effect of the incorporation of pet fibers on the properties of thermoplastic elastomer based on PP/elastomer blends
779
Effect of the incorporation of speciation data in the modeling of CO2–DEA–H2O system
780
Effect of the incorporation of surfactants on the physical properties of corn starch films
781
Effect of the increase in temperature on the evolution of the physical and chemical structure of vitrinite
782
Effect of the increase of dietary starch and soluble fibre on digestive efficiency and growth performance of meat rabbits
783
Effect of the indenter size on the indentation of aluminum
784
Effect of the induced drug-metabolizing enzyme activity on the duration of oxolinic acid in fish
785
Effect of the induced field memory on the bunch lengthening
786
Effect of the induced field memory on the bunch lengthening
787
Effect of the inelastic dynamic soil–structure interaction on the seismic vulnerability assessment
788
Effect of the Infection of Callosobruchus maculatus (Fab.) on the Weight Loss of Stored Cowpea (Vigna unguiculata (L.) Walp)
789
Effect of the infrastructure material on the failure behavior of prosthetic crowns
790
Effect of the ingestion of a dietary product containing Lactobacillus johnsonii La1 on Helicobacter pylori colonization in children
791
Effect of the initial charge and charge-state fluctuations on the range parameters of high-energy ions
792
Effect of the initial conditions on the onset of motion in sessile drops on tilted plates
793
Effect of the initial gas maldistribution on the pressure drop of structured packings
794
Effect of the initial grain size on grain refinement in Ti–2Al–2.5Zr alloy subjected to multi-impact process
795
Effect of the initial microstructure on the plasma nitriding behavior of AISI M2 high speed steel
796
Effect of the initial stage of annealing on modeling of enthalpy relaxation in a hyperquenched glass
797
Effect of the initial stages of leaching on the surface of alkaline earth sodium silicate glasses
798
Effect of the initial structure on the hydro-forming of toroidal shells
799
Effect of the initial total solids concentration and initial pH on the bio-hydrogen production from cafeteria food waste
800
Effect of the initiation of Bi-PAP on hemodynamic stability
801
Effect of the injection timing on the performance of a diesel engine using diesel-biodiesel blends
802
Effect of the injection-nozzle geometry on the interaction between a gas–liquid jet and a gas–solid fluidized bed
803
Effect of the inlet–outlet positions on the hydraulic performance of horizontal subsurface-flow wetlands constructed with heterogeneous porous media
804
Effect of the inner structure of domain walls on the stability of an isolated stripe domain in a pulsed field
805
Effect of the inoculation level in aerobic biodegradability tests of polymeric materials
806
Effect of the inoculation of a starter culture and vacuum packaging (during resting stage) on the appearance and some microbiological and physicochemical parameters of dry-cured ham
807
Effect of the inoculation of a starter culture and vacuum packaging during the resting stage on sensory traits of dry-cured ham
808
Effect of the inoculation with Desulforhabdus amnigenus and pH or O2 shocks on the competition between sulphate reducing and methanogenic bacteria in an acetate fed UASB reactor
809
Effect of the inoculum size on Listeria monocytogenes growth in structured media
810
Effect of the in-plane/out-of-plane applied magnetic field on the magnetic response of symmetric epitaxial junctions
811
Effect of the inseminate and the site of insemination on the uterus and pregnancy rates of mares
812
Effect of the insoluble dietary fibre from oil palm fat-free flour on digestibility in rats
813
Effect of the insulin-like growth factor-II and RYR1 genotype in pigs on carcass and meat quality traits
814
Effect of the Integrated Use of Mineral- and Bio-Fertilizers on Yield and Some Agronomic Characteristics of Fodder Pearl Millet (Pennisetum Glaucum L.)
815
Effect of the intensity of stochastic disturbance on temporal diversity patterns—A simulation study in evolutionary time scale
816
Effect of the intensity of stochastic disturbance on temporal diversity patterns—A simulation study in evolutionary time scale
817
Effect of the interaction among traps on the shape of thermoluminescence glow curves
818
Effect of the interaction between a low tyramine-producing Lactobacillus and proteolytic staphylococci on biogenic amine production during ripening and storage of dry sausages
819
EFFECT OF THE INTERACTION BETWEEN AZOTOBACTER INOCULATION; ORGANIC and MINERAL FERTILIZATION ON TOMATO; (Lycopersicon esculentum Mill.).
820
Effect of the interaction between bovine serum albumin Langmuir monolayer and calcite on the crystallization of CaCO3 nanoparticles
821
Effect of the interaction of instructional delivery model and preference of learning environment on students’ attitudes
822
Effect of the interactions between volatiles and char on sulfur transformation during brown coal upgrade by pyrolysis
823
Effect of the interatomic potential on the features of displacement cascades in α-Fe: A molecular dynamics study
824
Effect of the intercalated cation on the properties of poly(o-methylaniline)/maghnite clay nanocomposites
825
Effect of the intercalated/exfoliated nanostructure on the phase transformations of smectic polyester/layered silicate hybrids: Reinforcement of the liquid-crystalline matrix
826
Effect of the interface on the photophysics of eosin-Y in reverse miceles
827
Effect of the interface roughness on turbulent convective heat transfer in a composite porous/fluid duct
828
Effect of the interface treatment on the dielectric behavior of composite materials of unsaturated polyester reinforced by Alfa fiber
829
Effect of the interfacial area measurement parameters on the push-out strength between fiber post and dentin
830
Effect of the interfacial bonding status on the tensile fracture characteristics of a boron–fiber-reinforced aluminum composite
831
Effect of the interfacial reaction layer thickness on the thermal residual stresses in SiCf/Ti–6Al–4V composites
832
Effect of the interfacial structure on the thermal stability of poly(methyl methacrylate)–silica hybrids
833
Effect of the interfacial tension and ionic strength on the thermodynamic barrier associated to the benzocaine insertion into a cell membrane Original Research Article
834
Effect of the interlayer composition on the lifetime and color change of hybrid white organic light-emitting diodes
835
Effect of the intermediate velocity emissions on the quasi-projectile properties for the Ar + Ni system at 95 A MeV
836
Effect of the Intermolecular Potential on the Generalized Newton-Fourier Relations in the Problem of Gas Outflow into a Vacuum
837
Effect of the Internal Septum Extract of the Walnut Kernel on the Mesenchymal Stem Cells Cycle and MSCs-derived Insulin-Producing #x392;-cells Differentiation and Glucose Uptake
838
Effect of the internal stress relaxation during the post-annealing on the photo-induced properties of TiO2 coatings reactively sputtered
839
Effect of the Interparticle Interactions on Adsorption- Induced Frequency Shift of Nano-beam-Based Nanoscale Mass-Sensors: A Theoretical Study
840
Effect of the interphase on large deformation behaviour of polymer–clay nanocomposites near the glass transition: 2D RVE computational modelling
841
Effect of the interphase transfer of water on the free energy of ion exchange in zeolites
842
Effect of the interval between pregnancies on perinatal outcomes among white and black women
843
Effect of the interval of serial sections of ovarian tissue in the tissue chopper on the number of isolated caprine preantral follicles
844
Effect of the Intervention Based on New Communication Technologies and the Social-Cognitive Theory on the Weight Control of the Employees with Overweight and Obesity
845
Effect of the introduction of Na2B4O7 on erbium luminescence in tellurite glasses
846
Effect of the introduction of vanadium pentaoxide in phospho-tellurite glasses containing gadolinium ions
847
Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel
848
Effect of the ionic characteristics of charged membranes on the permeation of anionic solutes in reverse osmosis
849
Effect of the ionic conductivity in the systems ITO/poly(4,4′-dipentoxy-2,2′bithiophene)/aluminium and ITO/poly(3-butylthiophene)/aluminium: electrical properties in the dark and under illumination
850
Effect of the ionic liquid 1-ethyl-3-methylimidazolium acetate on the phase transition of starch: Dissolution or gelatinization?
851
Effect of the ionic strength and prostaglandin E2 on the free Ca2+ concentration and the Ca2+ influx in human red blood cells
852
Effect of the ionic strength of salts on retention and overloading behavior of ionizable compounds in reversed-phase liquid chromatography: I. XTerra-C18
853
Effect of the ionic strength of salts on retention and overloading behavior of ionizable compounds in reversed-phase liquid chromatography: II. Symmetry-C18
854
Effect of the ionic strength of the solution and the nature of its ions on the adsorption mechanism of ionic species in RPLC: III. Equilibrium isotherms and overloaded band profiles on Kromasil-C18
855
Effect of the ionic strength on properties of binary alginate/oligochitosan microcapsules
856
Effect of the ionic strength on the adsorption process of an ionic surfactant onto a C18-bonded charged surface hybrid stationary phase at low pH
857
Effect of the ionophore antibiotic monensin on the ruminal biotransformation of benzimidazole anthelmintics
858
Effect of the Iranian Health Sector Evolution Plan Implementation Focused on the Type of Delivery on Maternal and Neonatal Health Indicators in Selected Hospitals of East Azerbaijan Province
859
Effect of the iron content on the properties of a zirconium dioxide catalyst in the hydrogenation of carbon monoxide
860
Effect of the irradiance distribution from light curing units on the local micro-hardness of the surface of dental resins
861
Effect of the irradiated microenvironment on the expression and retrotransposition of intracisternal type A particles in hematopoietic cells
862
Effect of the irradiation–annealing–irradiation cycle on the mechanical properties of pure copper and copper alloy
863
Effect of the irrigation regime, type of fertilization, and culture year on the physical properties of almond (cv. Guara) Original Research Article
864
Effect of the isotopic mass of gallium on the indirect gap of GaP
865
Effect of the Jigsaw-Based Cooperative Learning Method on Sense of Connectedness with School and Social Skills in Sixth Grade Elementary Students
866
Effect of the joint inertia on selection of under-actuated control algorithm for flexible-link manipulators
867
Effect of the K/Na ratio in mixed-alkali lime silicate glasses on the rheological and physical properties
868
Effect of the K+, Ba2+, and Nd3+ addition to Nb2O5 on intrinsic and effective acidity in relation to biomass reactions
869
Effect of the Keggin anions on assembly of CuI-bis(tetrazole) thioether complexes containing multinuclear CuI-cluster
870
Effect of the kind of nitrogen fertilizer on the performance of host plant sunflower (Helianthurn annuas L.) in presence of parasite plant (Orobanche aegyptiaca)
871
Effect of the kinds of alcohols on the structure and stability of calcium oxide catalyst in triolein transesterification reaction Original Research Article
872
Effect of the Kuroshio intrusion on the chlorophyll distribution in the southern East China Sea during spring 1993
873
Effect of the La alloying addition on the antibacterial capability of 316L stainless steel
874
Effect of the La/Mg ratio on the structure and electrochemical properties of LaxMg3−xNi9 (x=1.6–2.2) hydrogen storage electrode alloys for nickel–metal hydride batteries
875
Effect of the label of oligosaccharide acceptors on the kinetic parameters of nasturtium seed xyloglucan endotransglycosylase (XET)
876
Effect of the lactate precursor on the microstructure of Li1+xMn 2−xO4 with 0≤x≤0.33
877
Effect of the lactation stage on concentration of whey proteins in caprine acid whey
878
Effect of the laminate thickness on the composite strength to repeated low energy impacts
879
Effect of the landscape context on the density and persistence of a predator population in a protected area subject to environmental variability
880
Effect of the lane reduction in the cellular automata models applied to the two-lane traffic
881
Effect of the laser fluence on the surface characterization of β-FeSi2 films prepared by pulsed laser deposition
882
Effect of the lateral misalignment of Si-capped Ge quantum dots on the strain distribution, the valence, conduction states and the optical properties
883
Effect of the lattice ions on the calcite flotation in presence of Zn(II)
884
Effect of the lattice octupole fields on the synchro-betatron mode coupling instability
885
Effect of the lattice octupole fields on the synchro-betatron mode coupling instability
886
Effect of the lattice volume on the Al3+ ion conduction in NASICON type solid electrolyte
887
Effect of the layer charge of clay minerals on optical properties of organic dyes. A review
888
Effect of the layer charge on the interaction of porphyrin dyes in layered silicates dispersions
889
Effect of the layout of small-and large-series WWER-1000 reactors of nuclear power plants on the stress-strain state of the header-steam generator connector weldment
890
Effect of the leaving group on the electrodic reduction mechanism of anti-Helicobacter pylori metronidazole derivatives, in aprotic and protic media
891
Effect of the leaving group on the reaction of 2-aminopyrroles with electron deficient heteroaromatic azadienes: substitution by addition–elimination versus cycloaddition
892
Effect of the Left Internal Mammary Artery to the Left Anterior Descending Artery on Mortality and Morbidity After Combined Coronary and Valve Operations
893
Effect of the length of alkyl chain on the cytochrome P450 dependent metabolism of N-dialkylnitrosamines
894
Effect of the length of salting time on the proteolytic changes in dry-cured lacón during ripening and on the sensory characteristics of the final product
895
Effect of the level and frequency of PEG supply on intake, digestion, biochemical and clinical parameters by goats given kermes oak (Quercus coccifera L.)-based diets
896
Effect of the Level Freshwater Snail Flesh (Pomacea paludosa) Soaked in Biochar in Feed on the Performance and Digestives Tract of Male Alabio Ducks (Anas Plathyrhyncos Borneo)
897
Effect of the level of dry matter and protein and degradation rate of starch on in vitro ruminal fermentation
898
Effect of the level of the addition of Pb(Y0.5Nb0.5)O3 on the structure, microstructure and ferroelectric properties of PZT(53/47)
899
Effect of the light-induced charge generation in fullerene derivative
900
Effect of the linear siloxane chain in cyclic silsesquioxane (CSSQ) on the mechanical/electrical property of the thin films
901
Effect of the lingual ledge of neutral zone impression on the retention and stability of mandibular complete denture in elders with atrophied alveolar ridge
902
Effect of the linseed oil surface treatment on the performance of resistive plate chambers
903
Effect of the linseed oil surface treatment on the performance of resistive plate chambers
904
Effect of the lipophilicity of model ingredients on their location and reactivity in emulsions and solid lipid nanoparticles
905
Effect of the liquid environment on the formation of carbon nanotubes and graphene layers by arcing processes
906
Effect of the lithium content on electrochemical lithium intercalation into amorphous and crystalline powdered Li1 ± δMn2O4 electrodes prepared by sol—gel method
907
Effect of the load condition on frictional heat generation and temperature increase within a tri-cone bit during high-temperature formation drilling
908
Effect of the loading and size of copper particles on the mechanical properties of novel Cu/LDPE composites for use in intrauterine devices
909
Effect of the Loading of Di- and Tri-valent Metal Cations on the Performance of Sulfated Silica-titania Nano-catalyst in the Esterification Reaction
910
Effect of the loading rate on mode I interlaminar fracture toughness of laminated composites
911
Effect of the loading rate on ultimate strength of composites. Application: Pressure vessel slow burst test
912
Effect of the local environment and state of the immobilized ligand on its reaction with a macromolecular receptor
913
EFFECT OF THE LOCAL ENVIRONMENT AND STATE OF THE IMMOBILIZED LIGAND ON ITS REACTION WITH A MACROMOLECULAR RECEPTOR
914
Effect of the Local Heat on the Pain of Vitamin K Injection in the Infants
915
Effect of the local structure of Ti-oxide species on the photocatalytic reactivity and photo-induced super-hydrophilic properties of Ti/Si and Ti/B binary oxide thin films
916
Effect of the local structures of V-oxides in MCM-41 on the photocatalytic properties for the partial oxidation of methane to methanol
917
Effect of the location of cobalt species on NO adsorption and NOx-SCR over Co–mordenite Original Research Article
918
Effect of the long periodic stacking structure and W-phase on the microstructures and mechanical properties of the Mg–8Gd–xZn–0.4Zr alloys
919
Effect of the longitudinal to transverse moduli ratio on the in-plane natural frequencies of symmetric cross-ply laminated beams by the stiffness method
920
Effect of the long-range adsorbate interactions on the atomic self-assembly on metal surfaces
921
Effect of the long-term intake of an egg white hydrolysate on the oxidative status and blood lipid profile of spontaneously hypertensive rats
922
Effect of the long-term memory on the beam break-up instability of a single bunch in storage rings
923
Effect of the long-term memory on the beam break-up instability of a single bunch in storage rings
924
Effect of the loss of auditory feedback on segmental parameters of vowels of postlingually deafened speakers
925
Effect of the Low or High Volume of High- Intensity Interval Training Protocols on the Leptin and Lipid Profile in Men with Type 2 Diabetes
926
Effect of the lumbricid earthworm Aporrectodea trapezoides on wheat grain yield in the field, in the presence or absence of Rhizoctonia solani and Gaeumannomyces graminis var. tritici
927
Effect of the lumbricid earthworm Aporrectodea trapezoides on wheat grain yield in the field, in the presence or absence of Rhizoctonia solani and Gaeumannomyces graminis var. tritici
928
Effect of the luminol signal enhancer on the chemiluminescence intensity and kinetics
929
Effect of the luminol signal enhancer selection on the curve parameters of an immunoassay and the chemiluminescence intensity and kinetics
930
Effect of the lump size on methane desorption from anthracite
931
Effect of the Lycium barbarum polysaccharides administration on blood lipid metabolism and oxidative stress of mice fed high-fat diet in vivo
932
Effect of the magnetic field of a current-carrying conductor on the vibrations of magnetoelastic plate structures
933
Effect of the magnetic field on optical properties of GaN/AlN multiple quantum wells
934
Effect of the Magnetic Field on the Characteristics of the Dusty Plasma FeO by Using the Direct Current System
935
Effect of the magnetic field on the ferroelectric transition of KD2PO4 measured by a high resolution and super-sensitive differential scanning calorimeter
936
Effect of the magnetic field orientation on the damping of liquid metal free surface waves in the processing of materials
937
Effect of the magnetic membrane magnetization on the oxygen solubility
938
Effect of the magnetism of manganese on the resistivity of liquid manganese–zinc alloys
939
Effect of the Magnitude of Lipid Lowering on Risk of Elevated Liver Enzymes, Rhabdomyolysis, and Cancer: Insights From Large Randomized Statin Trials Original Research Article
940
Effect of the Mahanadi River on the Development of Storm Surge Along the Orissa Coast of India: A Numerical Study
941
EFFECT OF THE MANUFACTURING PROCESS OF OLIVE JAM ON QUALITY OF LIPIDS AND ANTIOXIDANTS
942
Effect of the manufacturing process on the behaviour of press-braked thin-walled steel columns
943
Effect of the Manure Levels , Depth and Method of Applying Using Ditch Opener and Manure Laying Machine on Some of Soil Physical Properties
944
Effect of the MAPK cascade structure, nuclear translocation and regulation of transcription factors on gene expression
945
Effect of the market orientation on the customer satisfaction and organizational performance (Case Study: Pasargad Bank in Rasht, Gilan Province)
946
Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel
947
Effect of the material surface hardness on the erosion of AISI316
948
Effect of the material-hardening mode on the springback simulation accuracy of V-free bending
949
Effect of the matrix in niobium-based aerogel catalysts for the selective oxidation of olefins with hydrogen peroxide
950
Effect of the matrix on DNA electrophoretic mobility
951
Effect of the matrix on proton conductivity in electrolyte membranes containing deoxyribonucleic acids
952
Effect of the matrix on the radiative lifetimes of rare earth doped nanoparticles embedded in matrices
953
Effect of the matrix system in the delivery and in vitro bioactivity of microencapsulated Oregano essential oil Original Research Article
954
Effect of the matrix volatile composition in the headspace solid-phase microextraction analysis of extra virgin olive oil
955
Effect of the Maze Procedure for Atrial Fibrillation on Atrial and Brain Natriuretic Peptide
956
Effect of the mechanical activation on the photoelectrochemical properties of anatase powders
957
Effect of the mechanical boundary condition at the crack surfaces on the stress distribution at the crack tip in piezoelectric materials
958
Effect of the mechanical boundary condition at the crack surfaces on the stress distribution at the crack tip in piezoelectric materials
959
Effect of the mechanical properties on drilling resistance of Al2O3–TiO2 coatings manufactured by atmospheric plasma spraying
960
Effect of the mechanical stretching on the ferroelectric properties of a (VDF/TrFE) (75/25) copolymer film
961
Effect of the mechanoactivation on the structure, sorption and photocatalytic properties of titanium dioxide
962
Effect of the medium characteristics and the heating and cooling rates on the nonisothermal heat resistance of Bacillus sporothermodurans IC4 spores Original Research Article
963
Effect of the medium composition on the current of steady state voltammograms of neutral and charged species in dimethylformamide/toluene mixtures Original Research Article
964
Effect of the Medium on the Electronic Structures of the Anthranilic Acid Conformers: A Theoretical Study
965
Effect of the medium on the oxaziridinium-catalyzed enantioselective epoxidation
966
Effect of the melt processing conditions on the conductive paths formation in thermoplastic polyurethane/expanded graphite (TPU/EG) composites
967
Effect of the membrane wettability on the size and size distribution of microbubbles formed from Shirasu-porous-glass (SPG) membranes
968
Effect of the mesoscale hydrographic features on larval fish distribution across the shelf break of East China Sea
969
Effect of the metabolic inhibitor, methimazole on the drug susceptibility of a triclabendazole-resistant isolate of Fasciola hepatica
970
Effect of the Metabolic Syndrome and Hyperuricemia on Outcome in Patients With Coronary Artery Disease (from the Bezafibrate Infarction Prevention Study)
971
Effect of the metal concentration on the structural, mechanical and tribological properties of self-organized a-C:Cu hard nanocomposite coatings
972
Effect of the metal dilution on the thermal and light-induced spin transition in [FexMn1−x(bpp)2](NCSe)2: When T(LIESST) reaches T1/2
973
Effect of the metal foam materials on the performance of methanol steam micro-reformer for fuel cells Original Research Article
974
Effect of the metal loading in the hydroisomerization of n-octane over beta agglomerated zeolite based catalysts Original Research Article
975
Effect of the metal loading on the catalytic combustion of propene over palladium and platinum supported on alumina-pillared clays
976
Effect of the metal nature on the n-butanol adsorption in the absence of the metal–water chemisorption interaction
977
Effect of the metal nature on the reaction mechanism of the partial oxidation of ethanol over CeO2-supported Pt and Rh catalysts
978
Effect of the metal oxide particle distributions on modified PES membranes characteristics and performance
979
Effect of the metal precursor on the properties of Ru/ZnO catalysts Original Research Article
980
Effect of the metal precursor on the surface site distribution of Al2O3-supported Ru catalysts: catalytic effects on the n-butane/H2 test Original Research Article
981
Effect of the metal⋯metal interactions on the absorption properties of Pt(II) and Pd(II) complexes of glyoxilic acid oxime in solution and solid state: Theoretical and experimental study
982
Effect of the metallic glass volume fraction on the mechanical properties of Zr-based metallic glass reinforced with porous W composite
983
Effect of the metallic matrix on the sliding wear of plasma assisted debinded and sintered MIM self-lubricating steel
984
Effect of the metastable b.c.c phase from undercooled Fe-30 at.% Co alloy on mechanical and magnetic properties
985
Effect of the metastable b.c.c phase from undercooled Fe-30 at.% Co alloy on mechanical and magnetic properties
986
Effect of the methanolic extracts of different parts of Ferula assa-foetida on naloxone-induced withdrawal behavior in morphine-dependent mice
987
Effect of the method of photoactivating immobilized catalytic properties in the reaction of isobutylene oxidation
988
Effect of the method of production of the blends on mechanical and structural properties of biodegradable starch films produced by blown extrusion
989
Effect of the Mg/Al ratio of the hydrotalcite-type precursor on the dispersion and activity of Rh and Ru catalysts for the partial oxidation of methane
990
Effect of the Mg:Al Ratio on Borate (or Silicate)/Nitrate Exchange in Hydrotalcite
991
Effect of the Mg-substitution on the graphitic carbon foams—LiNi1−yMgyPO4 composites as possible cathodes materials for 5 V applications
992
Effect of the micro porous layer design on the dynamic performance of a proton exchange membrane fuel cell
993
Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining
994
Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining
995
Effect of the microhydration on the tautomerism in the anticarcinogenic drug 5-fluorouracil and relationships with other 5-haloderivatives
996
Effect of the micromagnetic structure of domain walls on the properties of an isolated domain in a thin magnetic film
997
Effect of the microscale wall topography on the thermocapillary convection within a heated liquid film
998
Effect of the microsctructure and lithium-ion content in poly[(vinylidene fluoride)-co-trifluoroethylene]/lithium perchlorate trihydrate composite membranes for battery applications
999
Effect of the microsomal triglyceride transfer protein −493 G/T polymorphism and type 2 diabetes mellitus on LDL subfractions
1000
Effect of the microsporidian Enterocytozoon salmonis on the immune response of chinook salmon
