بر اساس عنوان

1
Investigation on Composition and Microstructural Morphology of the Fe-B-C Hardfacing Layers
2
Investigation on Composition, Mechanical Properties, and Corrosion Resistance of Mg-0.5Ca-X(Sr, Zr, Sn) Biological Alloy
3
Investigation on compounding and application of C80–C100 high-performance concrete
4
Investigation on compression behaviour of highly compacted GMZ01 bentonite with suction and temperature control
5
Investigation on compressive behaviors of thermoplastic pipe confined concrete
6
Investigation on concentration of elements in wetland sediments and aquatic plants
7
Investigation on concrete compressive strength mixed with sand contaminated by crude oil products
8
Investigation on conformational order and mobility of DiamondBond-C18 and C18-alkyl modified silica gels by Fourier transform infrared and solid-state NMR spectroscopy
9
Investigation on controlling ice adhesion force to solid surface by using thin film made from silane-coupler
10
Investigation on cooling efficiency of grinding fluids in deep grinding
11
Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands
12
Investigation on corrosion and galvanic corrosion in LaFe11.6Si1.4 alloy
13
Investigation on corrosion and wear behaviors of nanoparticles reinforced Ni-based composite alloying layer
14
Investigation on corrosion behavior of sputter-deposited nanocrystalline (MoxCr1−x)5Si3 films by double cathode glow plasma
15
Investigation on corrosion control of mild steel buried in soil by spent FCC catalyst coating
16
Investigation on corrosion fatigue crack growth rate in 7075 aluminum alloy
17
Investigation on corrosion of yttrium-doped magnesium-based sacrificial anode in ground grid protection
18
Investigation on cotton stalk and bamboo sawdust carbonization for barbecue charcoal preparation
19
Investigation on Counterfeit Glucosamine and Chondroitin Products in Iranian Pharmaceutical Markets
20
Investigation on crack propagation law of ultra-high toughness cementitious composites under fatigue flexure
21
Investigation on cracking behavior of Ni-based coating by laser-induction hybrid cladding
22
Investigation on cracking mechanism of austenite stainless steel during in situ tension in transmission electron microscope
23
Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing
24
Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting
25
Investigation on Crystallinity Behavior of the Polylactic Acid and Poly-3-hydroxybutyrate Bio-based Polymers in the Presence of the Pyromellitic Anhydride
26
Investigation on crystallization and influence of Nd3+ doping of transparent oxyfluoride glass-ceramics
27
Investigation on crystallization kinetics and microstructure of novel transparent glass ceramics containing Nd:NaYF4 nano-crystals
28
Investigation on crystallization of TiO2–water nanofluids and deionized water
29
Investigation on damage of BSA molecules under irradiation of low frequency ultrasound in the presence of FeIII-tartrate complexes
30
Investigation on damage of BSA molecules under irradiation of low frequency ultrasound in the presence of FeIII-tartrate complexes
31
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
32
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
33
Investigation on Daylight Quality of Central Courtyard’s Adjacent Rooms in Traditional Houses in Hot Dry Region of Iran: A Case Study Yazdanpanah House
34
Investigation on defect distribution and its statistical evaluation for case hardened material states
35
Investigation on deformation behavior of sheet metals in viscous pressure bulging based on ESPI
36
Investigation on degradation mechanism of ion exchange membrane immersed in highly concentrated tritiated water under the Broader Approach Activities
37
Investigation on degradation of dyestuff wastewater using visible light in the presence of a novel nano TiO2 catalyst doped with upconversion luminescence agent
38
Investigation on degradation of polyethylene to oil in a continuous supercritical water reactor
39
Investigation on degradation of polyethylene to oils in supercritical water
40
Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads
41
Investigation on Determinants and Choice of Contraceptive Usage among Nigeria Women of Reproductive Age
42
Investigation on determination of loading path to enhance formability in tube hydroforming process using APDL
43
INVESTIGATION ON DETERMINING THE COEFFICIENT OF THERMAL CONDUCTIVITY TO TEXTILE MATERIALS RECOVERABLE, USED FOR THERMAL PROTECTION OF HOT PIPELINES
44
Investigation on development of free-surface structures in turbulent liquid lithium flow
45
Investigation on dielectric properties of the polyetherketone nanocomposite with lead titanate ultrafines
46
Investigation on dielectric relaxations of PVP–NH4SCN polymer electrolyte
47
Investigation on different ESD protection strategies devoted to 3.3 V RF applications (2 GHz) in a 0.18 μm CMOS process
48
Investigation on different oxides as candidates for nano-sized ODS particles in reduced-activation ferritic (RAF) steels
49
Investigation on diffusion bonding characteristics of aluminum metal matrix composites (Al/SiCp) with pure aluminum for different heat treatments
50
Investigation on diffusion bonding of functionally graded WC–Co/Ni composite and stainless steel
51
Investigation on Digital Algorithm for On-Line Monitoring and Diagnostics of Metal Oxide Surge Arrester Based on an Accurate Model
52
Investigation on disassociation of porphyrin J-aggregates induced by β-cyclodextrins using absorption and fluorescence spectroscopy
53
Investigation on dispermic androgenesis in sturgeon fish. The first successful production of androgenetic sturgeons with cryopreserved sperm
54
Investigation on dispersion of optical constants of Gd2O3 films by phase modulated spectroscopic ellipsometry
55
Investigation on dispersive optical constants and electrical properties of CuIn5S8 thin films
56
Investigation on distribution of airborne fungi in outdoor environment in Tehran, Iran
57
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
58
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
59
INVESTIGATION ON DOPPLER SPECTRAL CHARACTERISTICS OF ELECTROMAGNETIC BACKSCATTERED ECHOES FROM DYNAMIC NONLINEAR SURFACES OF FINITE-DEPTH SEA
60
Investigation on downwind short-range transport of pesticides after application in agricultural crops
61
Investigation on Dracaena Sanderiana PhytoremeDiation Ability for Hg and Cd using Multivariate Optimized Task Specific Ionic liquid-based Dispersive liquid-liquid Microextraction
62
Investigation on drag characteristics of heavy oil flowing through horizontal pipe under the action of aqueous foam
63
Investigation on droplet impingement erosion during steam generator tube failure accident
64
Investigation on drying of middle distillate by Pervaporation Original Research Article
65
Investigation on Durability of Copper Nano Particles on Cotton Fiber
66
Investigation on dynamic performance and parameter optimization design of pantograph and catenary system
67
Investigation on dynamic recrystallization using a modified cellular automaton
68
Investigation on dynamics of double emulsion droplet in a uniform electric field
69
Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends
70
Investigation on effect of ambient pressure in wire explosion process for synthesis of copper nanoparticles by optical emission spectroscopy
71
Investigation on effect of methylene spacer in holographic grating formation in eosin containing polymethacrylates
72
Investigation on effect of surface topography of pad/disc assembly on squeal generation
73
Investigation on Effect of Train Speed in Displacement of Railway Ballasted Track with Unsupported Sleepers
74
Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading
75
Investigation on effect of wheat residue management using different tillage and nitrogen fertilizer on maize yield in the north of khuzestan
76
Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine
77
Investigation on effective factors in drying time Iranian rice varieties in fluidized bed dryer
78
Investigation on Effectiveness of Suggestion System Settlement in Yazd Gas Company and Method Offered for Developing Improvement
79
Investigation on Effects of Calcium Nitrate, Calcium Sulfate (soil application) and Calcium chelate as Foliar spray on Endocarp Lesion Disorder and Some Qualitative Characteristics of pistachio nut Cv
80
Investigation on Effects of Environmental and Soil Factors on Establishment of Vegetation Types (Case Study: Sabzdasht, Bafgh)
81
Investigation on effects of surface morphologies on response of LPG sensor based on nanostructured copper ferrite system
82
Investigation on electrical transport, CO sensing characteristics and mechanism for nanocrystalline La1−xCaxFeO3 sensors
83
Investigation on electrochemical performances of melt-spun nanocrystalline and amorphous Mg2Ni1−xMnx (x = 0–0.4) electrode alloys
84
Investigation on Electromagnetic Properties of PLA/Carbon/Copper Antennas for Breast Cancer Detection
85
Investigation on electromechanical properties of A-site donor rare-earth modified tetragonal (4 mm) lead barium niobate (PBN55) ceramics Original Research Article
86
Investigation on electronic structures and nature of charge-transfer transition of ZnO:Co with variation of Co content
87
Investigation on electronic transport property of cerium nitride nanoribbon-based molecular device: a first-principles study
88
Investigation on electronic, mechanical and thermal properties of Hf–H system
89
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
90
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
91
Investigation on elemental mercury oxidation mechanism by non-thermal plasma treatment
92
Investigation on energy conservation in thermoplastics production
93
Investigation on energy transfer from Er3+ to Nd3+ in tellurite glass
94
Investigation on enhanced chemiluminescence reaction systems with bis(hydrogenperiodato) argentate(III) complex anion for fluoroquinolones synthetic antibiotics
95
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
96
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
97
Investigation on enzymatic degradation of γ-polyglutamic acid from Bacillus subtilis NX-2
98
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy
99
Investigation on estrogen receptor alpha gene polymorphisms in Iranian women with recurrent pregnancy loss
100
INVESTIGATION ON EXPANSION OF MORTARS CONTAINING TUFF NATURAL POZZOLAN DUE TO SULFATE ATTACK
101
Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti–6Al–4V after shot peening
102
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
103
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
104
Investigation on fabricating continuous vivid sharkskin surface by bio-replicated rolling method
105
Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
106
Investigation on feasibility of ionic liquids used in solar liquid desiccant air conditioning system
107
Investigation on feasibility of manufacturing “Carton board” from recycled beverage carton (Tetra Pak containers) without using resin
108
Investigation on feasibility to predict the content of saturate plus mono-nuclear aromatic hydrocarbons in vacuum gas oils from bulk properties and empirical correlations
109
Investigation on Fe-doped ZnO nanostructures prepared by a chemical route
110
Investigation on female mate choice in horses and possible association with the MHC
111
Investigation on female mate choice in horses and possible association with the MHC
112
Investigation on femtosecond laser irradiation energy in inducing hydrophobic polymer surfaces
113
Investigation on ferromagnetic and ferroelectric properties of (La, K)-doped BiFeO3–BaTiO3 solid solution
114
Investigation on field emission properties of graphdiyne–BN composite
115
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
116
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
117
Investigation on flip chip solder joint fatigue with cure-dependent underfill properties
118
Investigation on Flow Characteristics and Parameters Optimization of a New Concept of TC Nozzle
119
Investigation on Flow Characteristics and Performance Estimation of a Hybrid SVC Nozzle
120
Investigation on flow characteristics of generic car body with different boundary conditions
121
Investigation on Flow Characteristics of SVC Nozzles
122
Investigation on fluorescence quenching of dyes by graphite oxide and graphene
123
Investigation on flying plate diameter to thickness ratio influence on damage pattern and spall signal
124
Investigation on foaming properties of some organics for oily bubble bitumen flotation
125
Investigation on forced convective heat transfer of molten salts in circular tubes
126
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming
127
Investigation on formaldehyde gas sensor with ZnO thick film prepared through microwave heating method
128
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process
129
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of porous Zr-rich lead zirconate titante ceramics
130
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of pulsed laser deposited Pb(Zr0.93Ti0.07)O3 thin films
131
Investigation on Fracture Behavior of Armor Ceramics Against HEAT Penetration
132
Investigation on friction and wear behaviors of FeS films on L6 steel surface
133
Investigation on fuel-rich premixed flames of monocyclic aromatic hydrocarbons: Part I. Intermediate identification and mass spectrometric analysis
134
Investigation on gait time series by means of factorial moments
135
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
136
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
137
Investigation on gasoline deep desulfurization for fuel cell applications
138
Investigation on gasoline homogeneous charge compression ignition (HCCI) combustion implemented by residual gas trapping combined with intake preheating through waste heat recovery
139
Investigation on generated power of thermoelectric roof solar collector
140
Investigation on giant optical activity of piezoelectric crystals with langasite structure
141
Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining
142
Investigation on glycosylation patterns of proteins from human liver cancer cell lines based on the multiplexed proteomics technology
143
Investigation on grain refinement and precipitation strengthening applied in high speed wire rod containing vanadium
144
Investigation on Grease Elastohydrodynamic Lubrication
145
Investigation on Grinding Characteristics and Surface-Modifying Effects of Biocompatible Co-Cr Alloy
146
INVESTIGATION ON GROWTH AND CHARACTERIZATION OF NONLINEAR OPTICAL DICHLORO-DIGLYCINE ZINC II SINGLE CRYSTAL
147
Investigation on growth modes of GaN layers grown by LIRE
148
Investigation on growth process and tribological behavior of mixed alkylsilane self-assembled molecular films in aqueous solution
149
Investigation on growth, structural, optical, thermal, dielectric and mechanical properties of organic l-prolinium trichloroacetate single crystals
150
Investigation on Habit Formation, Risk Aversion and Intertemporal Substitution in Consumption of Iranian Households by GMM Approach
151
Investigation on heat and mass transfer in 3D woven fibrous material
152
Investigation on heat and mass transfer in 3D woven fibrous material [Int. J. Heat Mass Transfer 54 (2011) 3575–3586]
153
Investigation on heat and mass transfer in hygroscopic random charged fiber webs
154
Investigation on heat transfer and pressure drop during swirl flow boiling of R-134a in a horizontal tube
155
Investigation on heat transfer around buried coils of pile foundation heat exchangers for ground-coupled heat pump applications
156
Investigation on heat transfer characteristics of aircraft icing including runback water
157
Investigation on heat transfer characteristics of tapered cylinder pin fin heat sinks
158
Investigation on heat transfer evaluation for a more efficient two-zone combustion model in the case of natural gas SI engines
159
Investigation on heat transfer non-uniformity in rod bundle
160
Investigation on heat transfer properties of slurry of stabilized paraffin during a melting process
161
Investigation on heavy crude-water two phase flow and related flow characteristics
162
Investigation on heavy liquid metal cooling of ADS fuel pin assemblies
163
Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films
164
Investigation on high NF permeate recovery and scaling potential prediction in NF–SWRO integrated membrane operation Original Research Article
165
Investigation on high temperature short-term creep and stress relaxation of titanium alloy
166
Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel
167
Investigation on highly ordered porous anodic alumina membranes formed by high electric field anodization
168
Investigation on high-pressure metal hydride hydrogen compressors
169
Investigation on hole drift mobility in poly(n-hexylphenylsilane)
170
Investigation on Host Finding Behavior of the Two Parasitoids of Potato Tuber Moth in a Flight Tunnel
171
Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates
172
Investigation on hot deformation behavior of AISI T1 high-speed steel
173
INVESTIGATION ON HOT DEFORMATION BEHAVIOR OF AL-CU-MG-PB ALLOY
174
Investigation on hot deformation behavior of P/M Ni-base superalloy FGH96 by using processing maps
175
Investigation on hot deformation behavior of Waspaloy
176
Investigation on hot forming limits of high strength steel 22MnB5
177
Investigation on Hot Tearing Susceptibility of A201 Aluminum Alloy in Different Ingate Velocities and Molds
178
Investigation on hot-dip aluminised and subsequent HIPʹped steel sheets
179
Investigation on hot-fatigue behaviors of gradient thermal barrier coatings by EB-PVD
180
Investigation on hybrid cascaded multilevel inverter with reduced dc sources
181
Investigation on hydrogen annealing effect for various ferroelectric films by electrostatic force microscope
182
Investigation on hydrogen induced cracking behaviors of Ni-base alloy
183
Investigation on hydrogen production by catalytic steam reforming of maize stalk fast pyrolysis bio-oil
184
Investigation on hydrogen production using multicomponent aluminum alloys at mild conditions and its mechanism
185
Investigation on hydrophobic films from a hydrophobic powder
186
Investigation on idle performance of a spark-ignited ethanol engine with dimethyl ether addition
187
Investigation on improved Gabor order tracking technique and its applications
188
Investigation on in vitro dissolution rate enhancement of indomethacin by using a novel carrier sucrose fatty acid ester
189
Investigation on Incidence of Marekʹʹs Disease in Broiler Flocks of some Regions in Tehran Province, Iran
190
Investigation on incomplete condensation of non-azeotropic working fluids in high temperature heat pumps
191
Investigation on induction heating for hot stamping of boron alloyed steels
192
Investigation on Industrial Distribution in Cities of Iran
193
Investigation on Infectious coryza of layer chicken in Bangladesh with isolation, identification and antibiogram study
194
Investigation on Infectious Dropsy of Indian Major Carps
195
Investigation on influence factors of buffeting response of bridges and its aeroelastic model verification for Xiaoguan Bridge
196
Investigation on influence of dynamic strain ageing on fatigue crack growth behaviour of modified 9Cr–1Mo steel
197
Investigation on influence of sodium- or strontium-modification on corrosion-resistance of Al–11.7%Si alloy
198
Investigation on Influences of Synthesis Methods on the Magnetic Properties of Trimetallic Nanoparticles of Iron-Cobalt- Manganese Supported by Magnesium Oxide
199
Investigation on infrared laser absorption spectroscopy measurement of acetylene trace quantities
200
Investigation on initial stage of rapid pyrolysis at high pressure using Taiheiyo coal in dense phase
201
Investigation on Instability of RayleighBenard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition
202
Investigation on intelligent building standard communication protocols and application of IT technologies
203
Investigation on inter molecular complexation between 4,4′-methylene-bis(N,N-dimethylaniline) and β-cyclodextrin: Preparation and characterization in aqueous medium and solid state
204
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
205
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
206
Investigation on interface barrier of Au–CdZnTe contacts
207
Investigation on interface barrier of Au–CdZnTe contacts
208
Investigation on interface resistance between alternating layers in the upper of blast furnace
209
Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique
210
Investigation on interfacial adhesion of Ti–6Al–4V/nitride coatings
211
Investigation on interfacial interaction of flame retarded and glass fiber reinforced PA66 composites by IGC/DSC/SEM
212
Investigation on interferon alpha-inducible protein 6 (IFI6) gene as a candidate for meat and carcass quality in pig
213
Investigation on interior moisture distribution inducing dielectric anisotropy of coals
214
Investigation on Interval Edge-Colorings of Graphs
215
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O (BO3)3 crystal
216
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O(BO3)3 crystal
217
Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)
218
Investigation on isobaric vapor–liquid equilibrium for acetic acid + water + methyl ethyl ketone + isopropyl acetate
219
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack
220
Investigation on key properties controlling early-age stress development of blended cement concrete
221
Investigation on kinetic processes of fabrication of honeycomb-patterned polystyrene film and adsorption of surfactant by quartz crystal microbalance in impedance analysis method
222
Investigation on kinetics mechanism of hydrogen absorption in the La2Mg17-based composites
223
Investigation on lactation persistency and IGF-I gene polymorphisms in dairy sheep
224
Investigation on Laf3/Si Structure as Light-Addressable Potentiometric Fluoride (Fˉ) Sensor
225
Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle
226
Investigation on lap-joint behaviour of GFRP plates bonded to silica fume and rice husk ash concrete
227
Investigation on levels of blood homosystem in aged male hypertensive patients with low extremity atherosclerosis disease
228
Investigation on life cycle assessment oflead and zinc production
229
Investigation on LiNaSO4–Al2O3 ceramics as electrolytes for H2/O2 fuel cells
230
Investigation on lipase-catalyzed solution polymerization of cyclic carbonate
231
Investigation on lithium de-intercalation mechanism for LiNi0.45Mn0.45Al0.1O2
232
Investigation on lithium/polymer electrolyte interface for high performance lithium rechargeable batteries
233
Investigation on lithium–polymer electrolyte batteries
234
Investigation on local scour downstream of adverse stilling basins
235
Investigation on long-term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700 °C
236
Investigation on low loss (1–x) Mg0.95Co0.05TiO3–(x) Ca0.6La0.8/3TiO3 composite series for achieving a nearly zero temperature coefficient of resonant frequency
237
Investigation on low room-temperature resistivity Cr/(Ba0.85Pb0.15)TiO3 positive temperature coefficient composites
238
Investigation on L-shell X-ray fluorescence parameters for heavy elements and compounds
239
Investigation on luminescence and NOx removal by pulse corona discharges
240
Investigation on luminescence properties of Ln3+ doped Sr3EuMgSi2O8 (Ln=Dy, Er, Ho)
241
Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
242
Investigation on magnetorheological elastomers based on natural rubber
243
Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni–Mn–In alloys
244
Investigation on material properties and surface characteristics related to tyre–road noise for thin layer surfacings
245
Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell
246
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying
247
Investigation on Mechanical Behavior of Embedded Geocell in Geocell-Reinforced Railway Embankment
248
Investigation on mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal-matrix composites
249
Investigation on Mechanical Properties of Hybrid Polymer Composite Reinforced by Rice Husks and Date Palm Fibers as a Construction Material
250
Investigation on mechanical properties of P92 steel using ball indentation technique
251
Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a micro-indentation testing
252
Investigation on Mechanism of Altitude Characteristic for Air-breathing Pulsed Laser Thruster
253
Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits
254
Investigation on mechanism of magnetization reversal for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element methods
255
Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging
256
Investigation on mechanism of photocatalytic activity enhancement of nanometer cerium-doped titania
257
Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction
258
Investigation on meniscus shape and flow characteristics in open rectangular microgrooves heat sinks with micro-PIV
259
Investigation on metabolism of cisplatin resistant ovarian cancer using a genome scale metabolic model and microarray data
260
Investigation on metal elements in the brain tissues from DNTC patients
261
Investigation on Metallurgical Factors Controlling Charpy Impact Toughness in 1Cr21Ni5Ti Duplex Stainless Steel Original Research Article
262
Investigation on metals (V, Ni, and Fe) accumulation in the collection site of oil sludge
263
Investigation on methods for dealing with pile-up errors in evaluating the mechanical properties of thin metal films at sub-micron scale on hard substrates by nanoindentation technique
264
Investigation on microbial deterioration of exquisite collection of old manuscripts in Iran
265
Investigation on micro-perforated panel absorber with ultra-micro perforations
266
INVESTIGATION ON MICROSTRIP PATCH FRACTAL ANTENNA
267
Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding
268
Investigation on microstructure and creep properties of as-cast and aging-treated Mg–6Sn–5Al–2Si alloy
269
Investigation on microstructure and hydrogen generation performance of Al-rich alloys
270
Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering
271
Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process
272
Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer
273
Investigation on microstructure and properties of CrAlN/AlON nanomultilayers
274
Investigation on Microstructure and Wear Resistance of the Plain Carbon Steel Hardfaced by the Fe-Cr-C Electrodes Containing Mo, W, V Elements
275
Investigation on microstructure characterization and property of rapidly solidified Mg–Zn–Ca–Ce–La alloys
276
Investigation on Microstructure Evolution of a Semi-Austenitic Stainless Steel Through Hot Deformation
277
Investigation on Microstructure, Lattice and Structural Chemistry of Biogenic Silver Nanoparticles
278
Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment
279
Investigation on microstructures and electrochemical performances of hydrogen storage alloys
280
Investigation on Microstructures and Mechanical Properties ofthe Hypoeutectic Al-10Si-0.8Fe-XEr Alloy
281
Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs
282
Investigation on microtribological behavior of thin films using friction force microscopy
283
Investigation on minerals migration during co-firing of different straw/coal blending ratios
284
Investigation on mode III interlaminar fracture of glass/epoxy laminates using a modified split cantilever beam test
285
Investigation on molar mass, solubility and enzymatic fragmentation of xylans by multi-detected SEC chromatography
286
Investigation on molecular interactions of nicotinamide in aqueous citric acid monohydrate solutions with reference to manifestation of partial molar volume and viscosity B-coefficient measurements
287
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
288
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
289
Investigation on Mosquitoes Fauna (Diptera: Culicidae) and Probable Vector of West Nile Virus in Lorestan Province, Western Iran
290
Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique
291
INVESTIGATION ON MYCOFLORA OF POULTRY BREEDING HOUSES’ AIR AND STUDYING THE EFFICACY OF SPRAYING AND FUMIGATION ON INACTIVATING THE AIRSPORA
292
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
293
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
294
Investigation on nanocrystalline copper-doped zirconia thin films for optical sensing of carbon monoxide at high temperature
295
Investigation on nano-frictional performance of glucose-assisted ZnO sol–gel film on quartz substrate
296
Investigation on native vesicles containing the nicotinic acetylcholine receptor using FTIR-spectroscopy
297
Investigation on Natural Color Extraction from Black Tea Waste
298
Investigation on near-boundary solutions by singular boundary method
299
Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulate
300
Investigation on non-circular hydraulic jumps formed due to obliquely impinging circular liquid jets Pages 1429-1439
301
Investigation on non-conventional honing of sculptured surfaces for parts made of alloy steel
302
Investigation on nonequlibrium radiation and relaxation phenomena in shock tubes
303
Investigation on nonlinear optical properties of ladder-structure polydiacetylenes derivatives by using the elongation finite-field method
304
Investigation on Non-Metallic Inclusions in LCAK Steel Produced by BOF-LF-FTSC Production Route Original Research Article
305
Investigation on nonradiative decay of 4I13/2→4I15/2 transition of Er3+-doped oxide glasses
306
Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles
307
Investigation on NOx adsorption in [M′]-MAPO-5 (M = Si, Ti; M′ = Ag, Cu) by density functional theory calculation
308
Investigation on nutrients uptake of henna ecotypes under deficit irrigation and nitrogen
309
Investigation on Ochratoxin A stability using different extraction techniques
310
Investigation on one-pot hydrothermal synthesis, structural and optical properties of ZnS quantum dots
311
Investigation on operational characteristics of a miniature automatic cooling device
312
Investigation on optical absorption properties of electrochemically formed porous InP using photoelectric conversion devices
313
Investigation on optical properties in the surface of KClxBr1-x mixed crystals irradiated to gamma radiation (A new approach)
314
Investigation on optical properties of NiMn2O4 films by spectroscopic ellipsometry
315
Investigation on optical properties of ZnO nanowires by electron energy-loss spectroscopy
316
Investigation on optical transmission spectra of (1−x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals
317
Investigation on optimal working fluid inventory of a cryogenic loop heat pipe
318
Investigation on organic pollutants from a domestic heating system using various solid biofuels
319
Investigation on Organochlorine Pesticides Residues and Trace Metals in Melon (Colocynthis citrollus L.): A Survey
320
Investigation on origin of excess noise in superconducting and normal state BiSrCaCuO films
321
Investigation on PA/PP mixture properties by means of DMTA method
322
Investigation on packaging parameters of a circular multi-layered diaphragm-type piezoelectric actuator
323
Investigation on parasexiphenyl deposits onto alignment layers useful in liquid crystal displays
324
Investigation on Parasites and some Causes of Mortality in Captive Punjab urial (Ovis vignei punjabiensis), Pakistan
325
Investigation on particle trajectories and lagrangian statistics at the outlet of a circular jet
326
Investigation on passive open boundary conditions adapted to the conjunction of strong currents, standing tidal wave and high stratification: Application to the French Guiana Continental Shelf
327
Investigation on passivity of titanium under steady-state conditions in acidic solutions
328
Investigation on PEGylation strategy of recombinant human interleukin-1 receptor antagonist Original Research Article
329
Investigation on percolation in conductance of mixed reverse micelles
330
Investigation on Performance Accuracy of Different Surrogates in Real Time Tumor Tracking at External Beam Radiotherapy
331
Investigation on performance improvement of a fully-actuated quadrotor
332
Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-generation system
333
Investigation on performance of zirconia and magnesia–zirconia stationary phases in hydrophilic interaction chromatography
334
Investigation on performances of non-loss storage for cryogenic liquefied gas Original Research Article
335
Investigation on periodic cracking of elastic film/substrate system by the extended finite element method
336
Investigation on phase relationships and creep properties of Ir–Nb–X (X = Hf, Ta, or Ti) ternary alloys
337
Investigation on phase transformation mechanism of zeolite NaY under alkaline hydrothermal conditions
338
Investigation on phenolic compounds stability during microwave-assisted extraction
339
Investigation on phospheonol pyruvate carboxylase and proline in damaged and indamaged needles of Picea Abies and Abies Alba
340
Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cement
341
Investigation on Photocatalytic Activity of Perovskite ZnTiO3 and CdTiO3 Nanocrystals for Degradation of Crystal Violet and Congo Red Pollutants under Sunlight
342
Investigation on photocatalytic degradation of ethyl violet dyestuff using visible light in the presence of ordinary rutile TiO2 catalyst doped with upconversion luminescence agent
343
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: I. Conformation in water and recognition mechanism as a chemosensor
344
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: II. Efficient photoinduced energy transfer with naphthalene and its derivatives
345
Investigation on Physical and Mechanical Properties of Denim Woven Fabrics Made from Different Spandex Percentages
346
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst
347
investigation on physical properties of carbon nanotubes prepared by mechanothermal method
348
Investigation on physical properties of waste cooking oil – Rejuvenated bitumen binder
349
Investigation on Physicochemical Properties of Sugarcane Bagasse Fibre - Reinforced Polyester Composite
350
Investigation on Physiographic Condition of Wild Pistachio Habitats in Zagros Forests, Iran using GIS
351
Investigation on piezoelectric lead zirconate titanate detector bombarded obliquely with hypervelocity iron particles
352
Investigation on Plasmodium falciparum and Plasmodium vivax infection influencing host haematological factors in tribal dominant and malaria endemic population of Jharkhand
353
Investigation on polycrystalline CVD diamond-based alpha-particle detectors
354
Investigation on polymer–rubber aggregate modified porous concrete
355
Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites
356
Investigation on polysulfone blended NH-2MIL125 (Ti) membrane for photocatalytic degradation of Methylene Blue dye
357
Investigation on possibility of mechanochemical synthesis of CaTiO3 from different precursors
358
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
359
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
360
Investigation on possible allergenicity of 19 different commercial enzymes used in the food industry
361
Investigation on Possible Contamination of Port Sediments by Means of ATRFTIR Spectroscopy and Thermal Analysis
362
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
363
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
364
Investigation on potential applicability of subsurface cooling in Singapore
365
Investigation on powder metallurgy Cr–Si–Ta–Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance
366
Investigation on power output of the gamma-configuration low temperature differential Stirling engines
367
Investigation on pozzolanic effect of perlite powder in concrete
368
Investigation on Pr2 − xSrxNiO4 + δ (x = 0.3–1.0) cathode materials for intermediate temperature solid oxide fuel cell
369
Investigation on practical training participation intentions of technical and vocational college students through trust perceptions
370
Investigation on precipitation in Zircaloy-2 fuel cladding tube
371
Investigation on preformed shape design to improve formability in tube hydroforming process using FEM
372
Investigation on pre-oxidation of steels in light water reactor circuits Original Research Article
373
Investigation on preparation and physical properties of LPCVD SixOyNz thin films and nanocrystalline Si/SixOyNz superlattices for Si-based light emitting devices
374
Investigation on preparation and physical properties of nanocrystalline Si/SiO2 superlattices for Si-based light-emitting devices
375
Investigation on preparation and properties of Pb(Zr0.95Ti0.05)O3 thin films
376
Investigation on preparation of Al–4.5%Cu/SiCp nanocomposite powder via mechanical milling
377
Investigation on preparation of multiwalled carbon nanotubes by DC arc discharge under N2 atmosphere Original Research Article
378
Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods
379
Investigation on processing of industrial set-up plasma enhanced chemical vapor deposition with pulsed d.c. power
380
Investigation on propagation characteristics of the pressure wave in gas flow through pipes and its application in gas drilling
381
Investigation on properties and microstructures of spheroidal graphite Fe–C–2Si and Fe–C–2Al cast irons
382
Investigation on properties of a novel ceria–zirconia–praseodymia solid solution and its application in Pd-only three-way catalyst for gasoline engine emission control
383
Investigation on properties of re-dispersible cationic hydrogel nanoparticles
384
Investigation on properties of TiO2 thin films deposited at different oxygen pressures
385
Investigation on pseudosymmetry, twinning and disorder in crystal structure determinations: Ba(H2O)M2III[PO3(OH)]4 (M=Fe, V) as examples
386
Investigation on pulsed Nd:YAG laser welding of 49Ni–Fe soft magnetic alloy
387
Investigation on Pulverized Coal Combustion Behavior by Non-Isothermic Integral Thermogravimetry Method Original Research Article
388
Investigation on pumping oxygen characteristics of (Bi2O3)0.73(Y2O3)0.27 solid electrolyte
389
Investigation on purification of hydrochloric acid by membrane method
390
Investigation on pyrolysis behavior and decomposition compounds of three synthesized glycosidically bond flavor precursors
391
Investigation on pyrolysis characteristic of natural coke using thermogravimetric and Fourier-transform infrared method
392
Investigation on pyrolysis of Moroccan oil shale/plastic mixtures by thermogravimetric analysis
393
Investigation on QSAR and binding mode of a new class of human rhinovirus-14 inhibitors by CoMFA and docking experiments Original Research Article
394
Investigation on Raman spectra and thermal properties of LuVO4 and Nd:LuVO4 crystals
395
Investigation on rapid degradation of sodium dodecyl benzene sulfonate (SDBS) under microwave irradiation in the presence of modified activated carbon powder with ferreous sulfate Original Research Article
396
Investigation on RC rafters having different types of reinforcement
397
Investigation on RC rafters having different types of reinforcement
398
Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers
399
Investigation on reduction of cement binder in cold bonded pelletization of iron ore fines
400
Investigation on reduction of required superconductor volume in a resistive fault current limiter with Bi2223 bulk superconductor
401
Investigation on REE Transported by Airborne Dust and Deposited on Vegetation
402
Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique
403
Investigation on Relationships among Deformation, Texture and Properties of TA16 Alloy Tube
404
Investigation on relaxation dynamics of photoexcitations and spectral narrowing of photoluminescence in PPV films
405
Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server
406
Investigation on reliability of nanolayer-grained Ti3SiC2 via Weibull statistics
407
Investigation on requirement of crude protein for maintenance in Shaoxing ducks
408
Investigation on resistance to attrition of coated particles by response surface methodology
409
Investigation on rheological behavior of 8 mol% yttria stabilized zirconia (8YSZ) powder using Tiron
410
Investigation on Risk Factors of Ventilator-Associated Pneumonia in Acute Cerebral Hemorrhage Patients in Intensive Care Unit
411
Investigation on ropiness development by isolates of the genera Lactobacillus, Alcaligenes and Feta cheese starter cultures Original Research Article
412
Investigation on Safety Knowledge, Attitude, and Performance (Safety-KAP) Among Firefighters of Operating Units in Tehran
413
Investigation on Sb-rich Sb–Se–Te phase-change material for phase change memory application
414
Investigation on scandium-doped manganate La0.8Sr0.2Mn1−xScxO3−δ cathode for intermediate temperaturesolid oxide fuel cells
415
Investigation on selective rhenium leaching from molybdenite roasting flue dusts
416
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
417
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
418
Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor Original Research Article
419
Investigation on sensitized chemiluminescence systems and their mechanism for five fluoroquinolones Original Research Article
420
Investigation on sequential extraction of peanut allergens for subsequent analysis by ELISA and 2D gel electrophoresis
421
Investigation on Serum Levels of Interleukin-18 and Interleukin-6 in Patients With Dermatomyositis and Polymyositis
422
INVESTIGATION ON SEXUAL AND ASEXUAL PROPAGATION METHODS OF DAMASK ROSE (ROSA DAMASCENA MILL.)
423
Investigation on shape transferability in ultraprecision glass molding press for microgrooves
424
Investigation on shape variation of Au nanocrystals
425
Investigation on shot-coke-forming propensity and controlling of coke morphology during heavy oil coking
426
Investigation on simultaneous analysis of multicomponent polycyclic aromatic hydrocarbon mixtures in water samples: a simple synchronous fluorimetric method
427
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
428
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
429
Investigation on sintering mechanism of nanoscale tungsten powder based on atomistic simulation Original Research Article
430
Investigation on size dependent structural and magnetic behavior of nickel ferrite nanoparticles prepared by sol–gel and hydrothermal methods
431
Investigation on Slag-Refractory Interaction in Ladle Using Computational Techniques
432
Investigation on sliding wear performance of WC10Co2Ni cladding developed through microwave irradiation
433
Investigation on SnO2 nanopowders stored for different time and BaTiO3 modification
434
Investigation on soaking and formation of lead/acid battery plates with different mass structure
435
Investigation on socio –economic factors of rice straw burning in central and western county in Guilan Province.
436
Investigation on soil genesis and land suitability evaluation of Anarak region: a case study in Fars province
437
Investigation on solar desiccant dehumidification process for energy conservation of central air-conditioning systems
438
Investigation on solar hybrid desiccant cooling system for commercial premises with high latent cooling load in subtropical Hong Kong
439
Investigation on solar stills having floating plates
440
Investigation on sol–gel silica coatings for the protection of ancient glass: Interaction with glass surface and protection efficiency
441
Investigation on solid solubility and physical properties of Cu–Fe/CNT nano-composite prepared via mechanical alloying route
442
Investigation on Solubility of Hydrogen Sulfide in Molten Sulfur Using Iodometric Back Titration Method
443
Investigation on solvent-free solid polymer electrolytes for advanced lithium batteries and their performance
444
Investigation on some Ecological and Morphological Factor of Lagochilus macracanthus Fisch. & C. A. Mey in Yazd Province
445
Investigation on some main glycosides content of Stevia rebaudian B. under different concentrations of commercial and synthesized silver nanoparticles
446
Investigation on Some Morphological and Physiological Characteristics of Gerbera jamesonii as Affected by Humic Acid and Nano-Calcium Chelate in Hydroponic Culture Conditions
447
Investigation on some of the salient features of II–IV–V2 pnictides using band structure calculations as a tool
448
Investigation on some Schiff bases as HCl corrosion inhibitors for carbon steel
449
Investigation on sorption equilibria of Mn(II), Cu(II) and Cd(II) on a carboxylic resin by the Gibbs–Donnan model
450
INVESTIGATION ON SOUND ABSORPTION COEFFICIENT OF NATURAL PADDY FIBERS
451
Investigation on spacers and structures: A simple but effective approach toward high-performance hybrid white organic light emitting diodes
452
Investigation on spontaneous ignition of two kinds of organic material with water
453
Investigation on Stability and Galloping Characteristics of Iced Quad Bundle Conductor
454
Investigation on stability and preservation of arsenic species in iron rich water samples
455
Investigation on stability and rheological properties of nanofluid of ZnO nanoparticles dispersed in poly(ethylene glycol)
456
Investigation on stability of PZT/epoxy piezocomposite with pressure and temperature
457
Investigation on status and influential factors of cognitive function of the community-dwelling elderly in Changsha City
458
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
459
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
460
Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method
461
Investigation on strength, toughness and microstructure of an Al–Zn–Mg–Cu alloy pre-stretched thick plates in various ageing tempers
462
Investigation on strengthening of 6A02 aluminum alloy sheet in hot forming-quenching integrated process with warm forming-dies
463
Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
464
Investigation on stress distribution of multilayered composite structure (MCS) using infrared thermographic technique
465
Investigation on stress evolution in boron nitride films
466
Investigation on stress-crack opening relationship of engineered cementitious composites using inverse approach
467
Investigation on structural and physicochemical modifications of standard maize, waxy maize, wheat and potato starches after DIC treatment
468
Investigation on structural and thermal expansion properties of Al2ErGe2
469
Investigation on structural features of Shengli lignite through oxidation under mild conditions
470
Investigation on structural fluctuation of supercritical cyclohexane by small-angle X-ray scattering
471
Investigation on structural, optical and dielectric properties of Co doped ZnO nanoparticles synthesized by gel-combustion route
472
Investigation on structural, optical, thermal, mechanical and dielectric properties of l-proline cadmium chloride monohydrate single crystals: An efficient NLO material
473
Investigation on structure and properties of low-temperature sintered composite ferrites
474
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
475
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
476
Investigation on structures and electrochemical performances of the as-cast and -quenched electrode alloys
477
Investigation on Structures and Properties of Yb3+-Doped Laser Glasses
478
Investigation on Subchronic Lead Intoxication on Blood Indices of Male Rats
479
Investigation on substituent effect in novel azo-naphthol dyes containing polymethacrylates for nonlinear optical studies Original Research Article
480
Investigation on substrates of MmNi5-based alloy electrodes for high power applications
481
Investigation on sulfation of modified Ca-based sorbent
482
Investigation on sulfuric acid sulfonation of in-situ sol–gel derived Nafion/SiO2 composite membrane
483
Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing
484
Investigation on synergism of composite additives for zinc corrosion inhibition in alkaline solution
485
Investigation on syngas production via biomass conversion through the integration of pyrolysis and air–steam gasification processes
486
Investigation on synthesis of spheres-on-sphere silica particles and their assessment for high performance liquid chromatography applications
487
Investigation on synthesis, characterisation and electrochemical properties of TiO2–Al2O3 nanocomposite thin film coated on 316 L stainless steel
488
Investigation on synthesis, structure and catalytic modification of Ca(AlH4)2 complex hydride
489
Investigation on tempering of granular bainite in an offshore platform steel
490
Investigation on the accuracy of harmonic pollution metering techniques
491
Investigation on the adsorption capability of egg shell membrane towards model textile dyes
492
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
493
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
494
Investigation on the amorphous–crystalline transition and microstructure of sol-gel derived (Ba1−xSrx)TiO3 thin films
495
Investigation on the amounts of Na2CO3 and sulphur to obtain pure Y2O2S and up-conversion luminescence of Y2O2S:Er
496
Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade
497
Investigation on the applicability of turbulent-Prandtl-number models for liquid lead-bismuth eutectic
498
Investigation on the application of DNA forensic human identification techniques to detect homologous blood transfusions in doping control
499
Investigation on the application of titania nanorod arrays to the determination of chemical oxygen demand Original Research Article
500
Investigation on the as-cast microstructure of Nb–Nb silicide based multicomponent alloys
501
Investigation on the association between breast cancer and consumption patterns of combined oral contraceptive pills in the women of Isfahan in 2011
502
Investigation on the Association of Cardiovascular Markers with Severity of Chronic Pyelonephritis
503
Investigation on the atomic oxygen erosion resistance of sol–gel alumina–silica composite films on Kapton
504
INVESTIGATION ON THE AWARENESS AND PERCEPTION, ATTITUDE, AND IMPLEMENTATION OF THE CONCEPT OF ISLAMIZATION OF KNOWLEDGE AMONG UNIVERSITY EDUCATORS
505
Investigation on the ballistic behavior of Al2O3/Al2024 laminated composites
506
Investigation on the ballistic impact behavior of various alloys against 7.62 mm armor piercing projectile
507
Investigation on the ballistic performance of a dual phase steel against 7.62 mm AP projectile
508
Investigation on the Band Gap of Centered Square Phononic Crystals
509
Investigation on the barrier height and inhomogeneity of nickel silicide Schottky
510
Investigation on the barrier height and phase transformation of nickel silicide Schottky contact
511
Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches
512
Investigation on the behavior of choline-derived cationic surfactant in aqueous solution in the absence and presence of PdCl2
513
Investigation on the Behavior of Tensile Damage Evolution in T700/6808 Composite Based on Acoustic Emission Technology
514
Investigation on the behaviour of a DI diesel engine fueled with Jatropha Methyl Ester (JME) and Tyre Pyrolysis Oil (TPO) blends
515
Investigation on the behaviour of a restoration plaster applied on heavy salt loaded masonry
516
Investigation on the behaviour of medium carbon and vanadium microalloyed steels by hot forging test
517
Investigation on the binding activities of citalopram with human and bovine serum albumins
518
Investigation on the Binding Mode of 3, 4-Dihydropyrano[c]Chromene Derivative with Double Strand DNA
519
Investigation on the Biocatalytic Oligomerization of Glycidol
520
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation—Part 1: Alginate
521
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation-part 2: Chitosan
522
Investigation on the bond strength of Al-1100/St-12 roll bonded sheets, optimization and characterization
523
Investigation on the calcining condition and sintering temperature of perovskite-type La0.7Ca0.3CrO3 complex oxides by a combustion method
524
Investigation on the catalysis of COx-free hydrogen generation from ammonia
525
INVESTIGATION ON THE CAUSES OF VARIATION ORDERS IN THE CONSTRUCTION OF BUILDING PROJECT – A STUDY IN THE STATE OF SELANGOR, MALAYSIA
526
Investigation on the Chain-to-Chain and Chain-to-Open-Framework Transformations of Two One-Dimensional Aluminophosphate Chains
527
Investigation on the Changes in Color Parameters and Turbidity of Cornelian Cherry (cornus mass L) Produced by Microwave and Conventional Heating
528
Investigation on the characteristics and mechanisms of unusual heat transfer of supercritical pressure water in vertically-upward tubes
529
Investigation on the characteristics of the envelope FDTD based on the alternating direction implicit scheme
530
Investigation on the characteristics of the flow and heat transfer in bilaterally heated narrow annuli
531
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
532
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
533
Investigation on the charge transfer excitation spectrum for nano-sized Y2O3:Eu3+
534
Investigation on the chemiluminescence reaction of luminol–H2O2–S2−/R–SH system Original Research Article
535
Investigation on the chemoenzymatic synthesis of threo- and erythro-β-hydroxy-l-glutamic acid derivatives
536
Investigation on the Chronic Tension-Type Headache from the Persian Medicine Point of View
537
Investigation on the coagulation and deposition of combustion particles in an enclosed chamber with and without stirring
538
Investigation on the cold start characteristics of a hydrogen-enriched methanol engine
539
Investigation on the combination of space geodetic techniques
540
Investigation on the combustion characteristics of a diesel engine fueled with diesel–azides blends
541
Investigation on the combustion of heavy-oil fly-ashes
542
Investigation on the combustion possibility of dry sewage sludge as a pulverized fuel of thermal power plant
543
Investigation on the compressive properties of the three dimensional four-directional braided composites
544
Investigation on the Concentration of Chemical Contaminants in Swimming Pools in Shahroud, Iran
545
Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling
546
Investigation on the coordination modes: Syntheses, characterization and crystal structures of diorganotin (IV) dichloride with 4(5)-imidazoledithiocarboxylic acid
547
Investigation on the corrosion and hydrogen evolution for AZ91D magnesium alloy in single and anion-containing oxalate solutions
548
Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment co-deposition
549
Investigation on the corrosion behavior of aluminum alloys 3A21 and 7A09 in chloride aqueous solution
550
Investigation on the corrosion behavior of Ti–6Al–4V implant alloy by electrochemical techniques
551
Investigation on the Corrosion of Coated Steel Plates with Impact Defect using Divided Steel Plates
552
Investigation on the Corrosion Resistance and Release of Gentamicin Drug from Titanium Implant Reinforced by Polyethylene Glycol / Polyvinyl Alcohol Based Polymer Composite Coating
553
Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage
554
Investigation on the corrosion resistance of carbon black–graphite-poly(vinylidene fluoride) composite bipolar plates for polymer electrolyte membrane fuel cells
555
Investigation on the coupling effect of thermochromism and microstructure on spectral properties of structured surfaces
556
Investigation on the coupling reactions of aryltriflates with aromatic amines: Selection of the metal catalyst
557
Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method
558
Investigation on the crystal growth and characterisation of an organometallic non linear optical crystal – Tetrathiourea mercury tetrathiocyanato manganate
559
Investigation on the crystallography of reverted structure and its effect on the properties of low carbon steel
560
Investigation on the crystallography of the transformation products of reverted austenite in intercritically reheated coarse grained heat affected zone
561
Investigation on the Cu–Cr–RE alloys by rapid solidification
562
Investigation on the Cu–Cr–RE alloys by rapid solidification
563
Investigation on the cyanide leaching optimization for the treatment of KCGM gold flotation concentrate—phase 1
564
Investigation on the Cytotoxicity and Apoptosis of Citrate Based Silver Nanoparticles, In Vitro
565
Investigation on the damage mechanism and prevention of heavy-haul railway rail
566
Investigation on the defect structure and light-induced scattering of LiNbO3:Fe:Mg:Zr crystals with various Li/Nb ratios
567
Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
568
Investigation on the deletion and duplication of PMP22 gene in patients with Charcot-Marie-Tooth using Real-time PCR in Chaharmahal and Bakhtiari and Isfahan Provinces
569
Investigation on the dependence of optical spectra of silver chiral nanostructures on shape, dimensions and incident light by discrete dipole approximation
570
Investigation on the development potential of rooftop PV system in Hong Kong and its environmental benefits
571
Investigation on the dielectric properties of (Ba, Sr)TiO3 thin films on hybrid electrodes
572
Investigation on the diffusion bonding of tungsten and EUROFER97
573
Investigation on the diffusivity of partly fluorinated hydrocarbons in polymers
574
Investigation on the dipole–dipole interactions between tetramethylurea and acetonitrile by two-dimensional asynchronous spectroscopy
575
Investigation on the direct laser metallic powder deposition process via temperature measurement
576
Investigation on the dispersion of carbon nanotubes in nitrile butadiene rubber: Role of polymer-to-filler grafting reaction
577
Investigation on the dispersion of three-dimensional non-magnetized plasma photonic crystals with faced-centered-cubic lattices
578
INVESTIGATION ON THE DYNAMIC PERFORMANCE OF THE TRIPOD-BALL SLIDING JOINT WITH CLEARANCE IN A CRANK–SLIDER MECHANISM. PART 1. THEORETICAL AND EXPERIMENTAL RESULTS
579
Investigation on the early and late stage phase-separation dynamics of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) blends through rheological and scattering functions
580
Investigation on the ecological suitable regionalization of Melicope ptelefolia
581
Investigation on the Effect of Addition of Nano Alumina, Nano Silica, Nano Titania, and MWCNTs on Flexural and Compressive Strengths of Cement Mortar
582
Investigation on the Effect of Age and Gender on Hypersensitivity Reactions due to Allergens Injection in Iraqi Population
583
Investigation on The effect of Airgap Distance for Ignition Coils using Finite Element Methods
584
Investigation on the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel
585
Investigation on the effect of benzotriazole on the phosphating of carbon steel
586
Investigation on the effect of carpet fiber inclusion on hydraulic conductivity of clean sand using laboratory and random finite element analyses
587
Investigation on the effect of cellulosic nanoparticles’ morphology on the properties of natural rubber based nanocomposites
588
Investigation on the effect of collagen and vitamins on biomimetic hydroxyapatite coating formation on titanium surfaces
589
Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine
590
Investigation on the Effect of Current Density on Porous GaN Fabricated by UV-assisted Electrochemical Etching
591
INVESTIGATION ON THE EFFECT OF DIFFERENT PARAMETERS IN WHEELED MOBILE ROBOT ERROR.
592
Investigation on the effect of different supercritical fluid extraction process on the activation of the R-134 catalyst
593
Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon
594
Investigation on the effect of flocculants on the filtration behavior in microfiltration of fine particles Original Research Article
595
Investigation on the effect of friction stir processing on the superplastic forming
596
Investigation on the effect of Germination on the Proximate Composition of African Yam Bean (Sphenostylis stenocarpa Hochst ex A Rich) and Fluted Pumpkin (Telferia occidentalis)
597
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology
598
Investigation on the Effect of Ketotifen Upon Morphine Tolerance and Dependence in Mice
599
Investigation on the Effect of Low Intensity Ultrasound Stimulation on Mouse Spermatogonial Stem Cell Proliferation and Colonization
600
Investigation on the effect of lubrication and forming parameters to the green compact generated from iron powder through warm forming route
601
Investigation on the Effect of Machining Parameters on The Surface Roughness and Recast Layer During Powder- Mixed EDM (PMEDM)
602
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes
603
Investigation on the effect of micro and nano fillers on electrical and thermal conductivity of glass epoxy hybrid composites
604
Investigation on the effect of RF air plasma and neem leaf extract treatment on the surface modification and antimicrobial activity of cotton fabric
605
Investigation on the effect of Tb(dbm)3phen on the luminescent properties of Eu(dbm)3phen-containing mesoporous silica nanoparticles
606
Investigation on the effect of the coherent flow structures in the dispersion of fine particles around a bluff body
607
Investigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
608
Investigation on the effect of trifluoromethyl group on the [3+2] cycloadditions of thiocarbonyl S-methanides with α, β-unsaturated ketones: A theoretical study using DFT
609
Investigation on the effect of Zr doping in ZnO thin films by spray pyrolysis
610
Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete
611
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
612
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
613
Investigation on the Effectiveness of the IC Susceptibility TEM Cell Method
614
Investigation on the effectiveness of various methods of information dissemination aiming at a change of occupant behaviour related to thermal comfort and exergy consumption
615
Investigation on the effects of a mechanical shear-stress modification method during cross-flow membrane emulsification
616
INVESTIGATION ON THE EFFECTS OF ANTIBACTERIAL FINISHES ON DYED COTTON KNITTED FABRICS
617
Investigation on the Effects of Bactenecin on POPC Membrane in Atomistic Details Using Molecular Dynamics Simulation
618
Investigation on the Effects of Different Incident Angle of Sarpol-e Zahab Earthquake Ground Motions on an Embankment Dam
619
Investigation on the effects of fiber composites at concrete joints
620
Investigation on the effects of fire retardants on the thermal decomposition of wood-derived rayon fiber in an inert atmosphere by thermogravimetry–mass spectrometry
621
Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers
622
INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
623
Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics
624
Investigation on the effects of microstructure on the impact and fracture toughness of a C–Mn steel with various microstructures
625
Investigation on the effects of native defects on electronic structure in MgB2 by first-principles calculation
626
Investigation on the effects of source directivity of Chinese speech intelligibility in real and virtual rooms
627
Investigation on the Effects of Uncertainties in Construction Quality on the Bursting Capacity of Submarine Pipelines
628
INVESTIGATION ON THE EFFECTS OF VARIOUS WASTE EXTRACTS ON FREE FORMALDEHYDE IN LEATHER
629
Investigation on the Efficacy of some Fungicides in Controlling Alternaria Late Blight of Pistachio
630
Investigation on the electric field profile in CdTe by ion beam induced current
631
Investigation on the electric field profile in CdTe by ion beam induced current
632
Investigation on the Electrical Conductivity of Aqueous Glycol based ZnO Nanofluids
633
Investigation on the electrical properties of metal–Cd0.9Zn0.1Te contacts
634
Investigation on the electrical properties of molten quaternary systems (Li, Na, K, Cs)Cl and (Li, Na, K, Cs)F by MD simulation
635
Investigation on the electrical response behaviors of multiwalled carbon nanotube/polyurethane composite in organic solvent vapors
636
Investigation on the electron transfer between anatase and rutile in nano-sized TiO2 by means of surface photovoltage technique and its effects on the photocatalytic activity
637
Investigation on the enhancement of ultraviolet emission in Ag-ZnO microrods
638
Investigation on the existence of optimum interlayer distance for H2 uptake using pillared-graphene oxide
639
Investigation on the existence of solutions for some nonlinear functional-integral equations Original Research Article
640
Investigation on the expression of IGF-I protein in insulin-resistant rat brain
641
Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis
642
Investigation on the failure of air compressor
643
Investigation on the failure of the gear shaft connected to extruder
644
Investigation on the feasibility and enhancement methods of wind power utilization in high-rise buildings of Hong Kong
645
Investigation on the feasibility of room temperature plastic deformation of pure magnesium by simple shear extrusion process
646
Investigation on the film-forming properties of lab fermenter scale produced scleroglucans from Sclerotium rolfsii ATCC 201126
647
Investigation on the fine structure of sea-breeze during ESCOMPTE experiment
648
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
649
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
650
Investigation on the Flexural Behavior of Corroded Concrete Beams Repaired by CFRP Sheet Under Different Corrosion Levels
651
Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution
652
Investigation on the flexural behaviour of high-performance reinforced concrete beams using sandstone aggregates
653
Investigation on the flexural behaviour of reinforced concrete beams using phyllite aggregates from mining waste
654
Investigation on the flow and thermal behavior of impinging jet ventilation systems in an office with different heat loads
655
Investigation on The Flow Characteristics of Rotating Nozzle Cavitation Water Jet Flow Field
656
Investigation on the fluorescence quenching of 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) by certain estrogens and catechols
657
INVESTIGATION ON THE FLUX-BASED TORQUE-RIPPLE BEHAVIOR IN DTC BASED INDUCTION MOTOR DRIVES
658
Investigation on the foaming behaviors of NC-based gun propellants
659
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
660
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
661
Investigation on the formation and wear resistance of TiC coatings
662
Investigation on the formation of serrated grain boundaries with grain boundary characteristics in an AISI 316 stainless steel
663
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
664
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
665
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
666
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
667
Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings
668
Investigation on the fretting fatigue behaviors of steel wires under different strain ratios
669
Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system
670
Investigation on the fundamental niche of a rare species: an experiment on establishment of Luronium natans
671
Investigation on the Gas Jet Flow Performance Confined in Round Pipe
672
Investigation on the gas particle separation efficiency of the gas particle partitioner
673
Investigation on the gaseous and particulate emissions of a compression ignition engine fueled with diesel–dimethyl carbonate blends Original Research Article
674
Investigation on the gastrointestinal properties of ethanolic extract of Cannabis sativa through in vivo and in vitro approaches
675
Investigation on the generation process of HO2 radicals by γ-ray irradiation in O2-loaded fumed silica
676
Investigation on the Genotoxicity of Mercuric Chloride to Freshwater Clarias gariepinus
677
Investigation on the geochemical dynamics of a hydrate-bearing pockmark in the Niger Delta
678
Investigation on the geometric and matrix effects and quantitative determination of K, Cl and S atomic fraction for biomass burning particles by Monte Carlo simulation Original Research Article
679
Investigation on the geometrical aspect of deformation during equal-channel angular pressing by in-situ physical modeling experiments
680
Investigation on the growth of DAST crystals of large surface area for THz applications
681
Investigation on the growth performances of selected probiotic supplemented tilapia (Oreochromis niloticus) and walking catfish (Clarias batrachus) fingerlings
682
Investigation on the heavy-metal content of zinc-air button cells
683
Investigation on the Hermitian matrix expression‎ ‎subject to some consistent equations
684
Investigation on the high-temperature flow behavior of biomass and coal blended ash
685
Investigation on the hot deformation behavior of powder metallurgy TiAl-based alloy using 3D processing map
686
Investigation on the humification of municipal solid waste incineration residue and its effect on the leaching behavior of dioxins
687
Investigation on the hydration of CFBC fly ash
688
Investigation on the icosahedral quasicrystal phase in Mg70.8Zn28Nd1.2 alloy
689
Investigation on the IL-18 -607A/C and -137C/G on the susceptibility of ischemic stroke
690
Investigation on the Impact of an Energy Desubsidization Shock on the General Price Index Via a Nonlinear Inflation Model: Case of Iran
691
Investigation on the Impact of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC
692
Investigation on the impacts of different genders and ages on satisfaction with thermal environments in office buildings
693
Investigation on the impression creep properties of a cast Mg–6Al–1Zn magnesium alloy
694
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
695
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
696
Investigation on the improvement of red phosphorescence in CaTiO3:Pr3+ nanoparticles
697
Investigation on the inclusion behavior of neutral red with β-cyclodextrin, hydroxypropyl-β-cyclodextrin and sulfobutylether-β-cyclodextrin Original Research Article
698
Investigation on the influence of cell shape anisotropy on the mechanical performance of closed cell aluminium foams using micro-computed tomography
699
Investigation on the influence of channel geometries on PEMFC performance
700
Investigation on the influence of heat-treatment parameters on the hardness of AA6061-SiCp composite
701
Investigation on the influence of machining parameters when machining tool steel using EDM
702
Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography
703
Investigation on the influence of plasma properties and SOL transport on the particle flux profiles on divertor plates in the Large Helical Device
704
Investigation on the influence of substitute groups in organic nanodevices
705
Investigation on the Influence of Synovial Fluid and Vitreous Humour on Avulsion Wounds Healing in Rabbits
706
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
707
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
708
Investigation on the influences of heat transfer enhancement measures in a thermally driven metal hydride heat pump
709
Investigation on the inhomogeneous structure of metallic glasses based on the initial elastic deformation in nanoindentation
710
Investigation on the inquilines (Hymenoptera: Cynipidae, Synergini) of oak galls from inner western Anatolia, Turkey
711
Investigation on the interaction behavior between bisphenol A and pepsin by spectral and docking studies
712
Investigation on the interaction between a heterocyclic aminal derivative, SBDC, and human serum albumin
713
Investigation on the interaction between C16TAB and NaCMC in semidilute aqueous solution based on rheological measurement
714
Investigation on the interaction effect of two parallel axial through-wall cracks existing in steam generator tube Original Research Article
715
Investigation on the interaction of tetrachloride fluorescein–bovine serum albumin-β-cyclodextrin and the determination of protein by flow injection analysis Original Research Article
716
Investigation on the interaction of the toxicant, gentian violet, with bovine hemoglobin
717
Investigation on the interactions between hydrophobic anions of ionic liquids and Triton X-114 micelles in aqueous solutions
718
Investigation on the interactions between pirarubicin and phospholipids Original Research Article
719
Investigation on the interactions between polyurethane and metal chloride
720
Investigation on the interactions of silymarin to bovine serum albumin and lysozyme by fluorescence and absorbance
721
Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600 °C
722
Investigation on the internal thermal link of pulse tube refrigerators Original Research Article
723
Investigation on the jet liquid impingement heat transfer for the central processing unit of personal computers
724
Investigation on the kinetic models for the regeneration of silica gel by hot air combined with power ultrasonic
725
Investigation on the knowledge associated with foodborne diseases in consumers of northeastern Portugal
726
Investigation on the linear and nonlinear optical properties of fluorenone-based linear conjugated oligomers: The influence of π-spacer
727
Investigation on the load-displacement curves of a human healthy heel pad: In vivo compression data compared to numerical results
728
Investigation on the locus of solubilization of polycyclic aromatic hydrocarbons in non-ionic surfactant micelles with 1H NMR spectroscopy
729
Investigation on the long-term radiation hardness of low and medium resistivity starting silicon materials for RT silicon detectors in high energy physics
730
Investigation on the low energy conformational surface of tabun to probe the role of its different conformers on biological activity
731
Investigation on the macromolecular network structure of Xianfeng lignite by a new two-step depolymerization
732
Investigation on the magnetomechanical behavior of trilayered GM actuator
733
Investigation on the magneto-optical Voigt effects in surface plasmon modes and anisotropic photonic band gap in the three-dimensional magnetized plasma photonic crystals as the mixed polarized modes considered
734
Investigation on the martensitic transformation and the associated intermediate phase in U–2 wt%Zr alloy
735
Investigation on the martensitic transformation in γ-Fe(n) nanoparticles
736
Investigation on the mechanical behavior of fivefold twinned silver nanowires
737
Investigation on the mechanical behaviors of copper nanowires under torsion
738
Investigation on the Mechanical Properties of Fiber Reinforced Recycled Concrete
739
Investigation on the mechanical strength of magnetic hollow silica prepared from Pickering emulsion route
740
Investigation on the Mechanism of Blade Tip Recess Improving the Aerodynamic Performance of Transonic Axial Flow Compressor
741
Investigation on the mechanism of diffusion in mesopore structured ZSM-5 and improved heavy oil conversion
742
Investigation on the Mechanism of Drag Modification over Triangular Riblets
743
Investigation on the mechanism of the photoluminescence of MCM-41
744
Investigation on the Methaemoglobin Concentration of Three Human Erythrocyte Genotypes Infected With Plasmodium falciparum.
745
Investigation on the microscopic features of layered oxide Li[Ni1 / 3Co1 / 3Mn1 / 3]O2 and their influences on the cathode properties
746
Investigation on the microstructural refinement of an Mg–6 wt.% Zn alloy
747
Investigation on the microstructure and cracking susceptibility of laser-clad V2O5 /NiCrBSiC alloy coatings
748
Investigation on the microstructure and ferroelectric properties of porous PZT ceramics
749
Investigation on the microstructure and mechanical properties of CuCrZr after manufacturing thermal cycle for plasma facing component
750
Investigation on the microstructure and mechanical properties of the spray-formed Cu–Cr alloys
751
Investigation on the microstructure and mechanical properties of Ti–6Al–4V alloy joints with electron beam welding
752
Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content
753
Investigation on the microstructure of self-reinforced Nd-α-sialon ceramics
754
Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application
755
Investigation on the microtribological behaviour of human tooth enamel by nanoscratch
756
Investigation on the microwave-derived LiFePO4/C cathode material
757
Investigation on the Mixture of Calcium and Ammonium Nitrates as Steel Corrosion Inhibitor in Simulated Concrete Pore Solution
758
Investigation on the model of consumers’ perceived risk—integrated viewpoint
759
Investigation on the modification behavior of A356 alloy inoculated with a Sr-Y composite modifier
760
Investigation on the morphologic and morphometric changes in perikaryon and nucleus of spinal neuron during prenatal and postnatal life of male dogs.
761
Investigation on the morphological characteristics of nanofiberous membrane as electrospun in the different processing parameters
762
Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
763
Investigation on the most probable breaking behaviors of copper nanowires with the dependence of temperature
764
Investigation on the nature of the chemical link between acetylenic organosilane self-assembled monolayers and Au(1 1 1) by means of synchrotron radiation photoelectron spectroscopy and scanning tunneling microscopy
765
Investigation on the Neff reverse annealing effect using TSC/I-DLTS: Relationship between neutron induced microscopic defects and silicon detector electrical degradations
766
Investigation on the Neff reverse annealing effect using TSC/I-DLTS: Relationship between neutron induced microscopic defects and silicon detector electrical degradations
767
Investigation on the Neural Mechanism of Hypnosis-Based Respiratory Control Using Functional MRI
768
Investigation on the non-homogeneity of residual stress field induced by laser shock peening
769
Investigation on the nucleation kinetics of zinc thiourea chloride (ZTC) single crystals
770
Investigation on the O3 sensitivity properties of WO3 thin films prepared by sol–gel, thermal evaporation and r.f. sputtering techniques
771
Investigation on the Occurrence of Aedes Species in Borderline of Iran and Azerbaijan for Control of Arboviral Diseases
772
Investigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
773
Investigation on the origin of dielectric constant evolution in films deposited from organosilicon molecules in microwave DECR plasma reactor
774
Investigation on the origin of the giant dielectric constant in CaCu3Ti4O12 ceramics through analyzing CaCu3Ti4O12–HfO2 composites
775
Investigation on the oscillation modes in a thermoacoustic Stirling prime mover: mode stability and mode transition Original Research Article
776
Investigation on the oxidation behavior of Mo–Ru hard coatings
777
Investigation on the oxidation characteristics of copper-added modified Zircaloy-4 alloys in pressurized water at 360°C
778
Investigation on the oxidation of aryl oxiranylmethanols and the synthesis of 2-aryl-N-thiazolyl-oxirane-2-carboxamides as glucokinase activators
779
Investigation on the paraffin prevention performance of lanthanum-modified zinc powder
780
Investigation on the partial oxidation of methane to syngas in a tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ membrane reactor
781
Investigation on the pebble bed flow model in VSOP
782
Investigation on the performance enhancement of silicon solar cells with an assembly grating structure
783
Investigation on the performance of a spark-ignited ethanol engine with DME enrichment
784
Investigation on the performance of UPQC-Q for voltage sag mitigation and power quality improvement at a critical load point
785
Investigation on the performances of multiple microstrip CdTe detectors
786
Investigation on the performances of multiple microstrip CdTe detectors
787
Investigation on the performances of multi-quantum barriers in a single quantum well solar cell
788
Investigation on the phase behaviour of gelatin/agarose mixture in an environment of reduced solvent quality
789
Investigation on the phase separation in undercooled Cu–Fe melts
790
Investigation on the phase stability, sintering and thermal conductivity of Sc2O3–Y2O3–ZrO2 for thermal barrier coating application
791
Investigation on the pH-dependent binding of Eosin Y and bovine serum albumin by spectral methods
792
Investigation on the pH-dependent binding of vitamin B12 and lysozyme by fluorescence and absorbance
793
Investigation on the photocatalytic activity of chemically synthesized zirconium doped cadmium selenide nanoparticles for indigo carmine dye degradation under solar light irradiation
794
Investigation on the photocatalytic activity of TiO2@WO3/ZnO catalyst in the waste water treatment containing alkanolamine contaminants
795
investigation on the photocatalytic and antibacterial activities of green synthesized cupric oxide nanoparticles using clitoria ternatea
796
Investigation on the photoconductive composites: TiOPc with various AZOs
797
Investigation on the photophysics of the narrow bandgap polymer for PDPPTT-T
798
Investigation on the photoreactions of nitrate and nitrite ions with selected azaarenes in water
799
Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener
800
Investigation on the porosity development by CO2 activation in heavy oil fly ashes☆
801
Investigation on the potential generation of ultrafine particles from the tire–road interface
802
Investigation on the Potential of OSL for Dating Qanat in the Dasht-e Bayaz Region of Northeastern Iran Using the SAR Protocol for Quartz
803
Investigation on the potential use of the mimetic peroxidase-catalyzed reaction of hydrogen peroxide and o-hydroxyphenylfluorone in fluorescence analysis Original Research Article
804
Investigation on the Potentials of Cupola Furnace Slag in Concrete
805
Investigation on the precipitation behavior of M3C phase in T91 ferritic steels
806
Investigation on the precursors of bump-prone coal failure
807
Investigation on the preparation and chromatographic behavior of a new para-tert-butylcalix[4]arene-1,2-crown-4 stationary phase for high performance liquid chromatography
808
Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process
809
Investigation on the preparation of Si/mullite/Yb2Si2O7 environmental barrier coatings onto silicon carbide
810
Investigation on the presence of domoic acid in Greek shellfish
811
Investigation on the presence of sulphites in fresh meat preparations: Estimation of an allowable maximum limit
812
Investigation on the pressure drop characteristics of cryocooler regenerators under oscillating flow and pulsating pressure conditions Original Research Article
813
INVESTIGATION ON THE PREVALENCE OF LEUKAEMIA AT A TERTIARY CARE HOSPITAL, LAHORE
814
Investigation on the production of copper nitride (copper azide) thin films and their nanostructures
815
Investigation on the production of hydrogen rich gas in a plasma converter for motorcycle applications
816
Investigation on the properties and kinetics of glucose-fed aerobic granular sludge
817
Investigation on the properties of high-pressure torsion (HPT) processed Al/B4C composite
818
Investigation on the properties of linear PLA-poloxamer and star PLA-poloxamine copolymers for temporary biomedical applications
819
Investigation on the properties of Nb and Al doped Ti3SiC2 as a new interconnect material for IT-SOFC
820
Investigation on the Protein Degradation, Free Fatty Acid Content and Area Fraction of Poosti Cheese, Iranian Traditional Cheese Ripened in Skin
821
Investigation on the pulsed DC plasma nitriding with optical emission spectroscopy
822
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. I. Flow reactor pyrolysis and jet stirred reactor oxidation
823
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. II. A comprehensive kinetic modeling study
824
Investigation on the pyrolysis of cow bone as a catalyst for ozone aqueous decomposition: Kinetic approach
825
Investigation on the pyrolysis of cow bone as a catalyst for ozone aqueous decomposition: Kinetic approach
826
Investigation on the radiation damage behavior of various alloys in a fusion reactor using thorium molten salt
827
Investigation on the reactions influencing biomass air and air/steam gasification for hydrogen production
828
Investigation on the reactivity of isoxazol-5-ones towards 1,2-diaza-1,3-dienes: new entry to variously substituted (imidazol-2-yl)acetate and 1,3-oxazin-6-one derivatives
829
Investigation on the red shift of charge transfer excitation spectra for nano-sized Y2O3:Eu3+
830
Investigation on the regulated and unregulated emissions of a DME engine under different injection timing
831
INVESTIGATION ON THE RELATION BETWEEN THE USE OF ICT AND BUREAUCRATIC HEALTH
832
Investigation on the Relationship between D-Dimer and Cell Blood Count Indices in COVID-19 Prognosis: A Retrospective Study on 320 COVID-19 Patients
833
Investigation on the relationship between intermediate temperature embrittlement and intergranular precipitate in Ni(Bi) alloy
834
Investigation on the relationship between leaf water use efficiency and physio-biochemical traits of winter wheat under rained condition
835
Investigation on the Relationship between Mental Workload and Musculoskeletal Disorders among Nursing Staff
836
Investigation on the relationship between the physicochemical properties of particles composed of a novel lipid A analog, E5531, and its pharmacokinetics
837
Investigation on the relationship of proline with wheat anti-drought under soil water deficits
838
Investigation on the removal of Mo(VI) from Mo–Re containing wastewater by chemically modified persimmon residua
839
Investigation on the residual stress and microstructure of (TiB + TiC)/Ti–6Al–4V composite after shot peening
840
Investigation on the response of Iranian oriental and semi oriental tobacco genotypes to Potato Virus Y (PVY) under controlled conditions
841
Investigation on the response of segmented concrete targets to projectile impacts
842
Investigation on the rheological and stability characteristics of coal–water slurry with long side-chain polycarboxylate dispersant
843
Investigation on the rheological behavior of nylon 6/11
844
Investigation on the role of air in the dynamical evolution and thermodynamic state of a laser-induced aluminium plasma by spatial- and time-resolved spectroscopy
845
Investigation on the Role of Learning Theory in Learning Analytics
846
Investigation on the Role of Recycling Materials and the Importance of their Potential Energy in the Trend of Sustainable Development
847
Investigation on the role of Spirulina platensis in ameliorating behavioural changes, thyroid dysfunction and oxidative stress in offspring of pregnant rats exposed to fluoride
848
Investigation on the role of VEGF gene polymorphisms in the risk of osteosarcoma
849
Investigation on the safety concrete for highway crash barrier
850
INVESTIGATION ON THE SCATTERING FROM ONE-DIMENSIONAL NONLINEAR FRACTAL SEA SURFACE BY SECOND-ORDER SMALL-SLOPE APPROXIMATION
851
Investigation on the seasonal transformation of Tiab estuary’s shoreline using RS and GIS techniques
852
Investigation on the seismic behavior of exterior beam–column joint using T-type mechanical anchorage with hair-clip bar
853
Investigation on the seismic behavior of exterior beam–column joint using T-type mechanical anchorage with hair-clip bar
854
Investigation on the Simultaneous Effects of Zn Additions and Critical Ingate Velocity on the Hot Tearing Susceptibility of A356 and A206 Aluminum Alloys
855
Investigation on the sliding of aluminium thin foils against PVD-coated carbide forming-tools during micro-forming
856
Investigation on the sloshing effect in a 2D tank under harmonic excitation using Smoothed Particle Hydrodynamics (SPH) and Finite Volume method (FVM)
857
Investigation on the solidification of several pure cyclic and aromatic hydrocarbons at pressures to 300 MPa
858
Investigation on the solubilization of organic dyes and micro-polarity in AOT water-in-CO2 microemulsions with fluorinated co-surfactant by using UV-Vis spectroscopy
859
Investigation on the sonocatalytic degradation of acid red B in the presence of nanometer TiO2 catalysts and comparison of catalytic activities of anatase and rutile TiO2 powders
860
Investigation on the sonocatalytic degradation of acid red B in the presence of nanometer TiO2 catalysts and comparison of catalytic activities of anatase and rutile TiO2 powders
861
Investigation on the sonocatalytic degradation of congo red catalyzed by nanometer rutile TiO2 powder and various influencing factors Original Research Article
862
Investigation on the sonocatalytic degradation of methyl orange in the presence of nanometer anatase and rutile TiO2 powders and comparison of their sonocatalytic activities Original Research Article
863
Investigation on the spectrum-effect relationships of EtOAc extract from Radix Isatidis based on HPLC fingerprints and microcalorimetry
864
Investigation on the spurious eigenvalues of vibration plates by non-dimensional dynamic influence function method
865
Investigation on the square cell honeycomb structures under axial loading
866
Investigation on the stability of deoxynivalenol and DON-3 glucoside during gastro-duodenal in vitro digestion of a naturally contaminated bread model food
867
Investigation on the static recording characteristic of super-resolution near-field structure with antimony mask layer
868
Investigation on the stress concentration effect at the corroded surface achieved by atmospheric exposure test
869
Investigation on the Stress of Chinese Pediatricians Under the Outbreak of COVID-19
870
Investigation on the structural and electrical properties of NdSrNi1−xCrxO4+δ (0.1≤x≤0.9) system
871
Investigation on the structural and nonlinear optical properties of Pt doped TiO2 nanoparticles
872
Investigation on the structural characteristics of metallic glasses based on the first displacement excursion behavior in nanoindentation
873
Investigation on the structural properties and corrosion inhibition of W coatings on stainless steel AISI 304 using PF device
874
Investigation on the structural stability and electronic properties of InSb nanostructures – A DFT approach
875
Investigation on the structural, morphological and photochemical properties of spin-coated TiO2 and ZnO thin films prepared by sol-gel method
876
Investigation on the structure and electrochemical properties of the laser sintered La0.7Mg0.3Ni3.5 hydrogen storage alloys
877
Investigation on the structure and the oxidation activity of the solid carbon produced from catalytic decomposition of methane
878
Investigation on the submerged liquid jet arrays impingement cooling
879
Investigation on the Suitability of Fobur Granite in Jos, Plateau State, Nigeria for Road Construction
880
Investigation on the Suitability of Two-Dimensional Depth-Averaged Models for Bend-Flow Simulation
881
Investigation on the sulfur state and phase transformation of spent and regenerated S zorb sorbents using XPS and XRD
882
Investigation on the supercritical carbon dioxide extraction of some polar drugs from spiked matrices and tablets
883
Investigation on the superplasticity behavior of ultrahigh carbon steel
884
Investigation on the surface and near-surface characteristics of Ti–2.5Cu after various mechanical surface treatments
885
Investigation on the surface layer characteristics of shot peened titanium matrix composite utilizing X-ray diffraction
886
Investigation on the surface properties of chemically modified natural fibers using inverse gas chromatography
887
Investigation on the surface reactivity of luminescent porous silicon
888
Investigation on the Surface State of TiO2 Ultrafine Particles by Luminescence
889
Investigation on the synergetic effect between anatase and rutile nanoparticles in gas-phase photocatalytic oxidations
890
Investigation on the Synergistic Complexation of Ni(II) with 1,10-Phenanthroline and Dithizone at Hexane-Water Interface Using Centrifugal Liquid Membrane-Spectrophotometry
891
Investigation on the synthesis conditions at the interpore distance of nanoporous anodic aluminum oxide: A comparison of experimental study, artificial neural network, and multiple linear regression
892
Investigation on the temperature effect of a mixed vesicle composed of polydiacetylene and BODIPY 558
893
Investigation on the temperature-dependent growth rate of carbon nanotubes using chemical vapor deposition of ferrocene and acetylene
894
Investigation on the tensile properties of three-dimensional full five-directional braided composites
895
Investigation on the teratogenic and embryotoxic effects of nanozeolite on chick embryos model
896
Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites
897
Investigation on the thermal performance of different lightweight roofing structures and its effect on space cooling load
898
Investigation on the thermal transport properties of ethylene glycol-based nanofluids containing copper nanoparticles
899
Investigation on the thermodynamic properties of KCl/CsCl + NaCl + CH3OH + H2O quaternary systems at 298.15 K
900
Investigation on the thermoelectric properties of nanostructured image
901
Investigation on the TiO2 nanotubes ordering fabricated by anodizing on different substrate surface morphologies
902
Investigation on the TPR prediction accuracy in blanket neutronics experiments with reflector at JAEA/FNS
903
Investigation on the traceability of three dimensional scanning electron microscope measurements based on the stereo-pair technique
904
Investigation on the transition crystal of ordinary rutile TiO2 powder by microwave irradiation in hydrogen peroxide solution and its sonocatalytic activity
905
Investigation on the transition crystal of ordinary rutile TiO2 powder by microwave irradiation in hydrogen peroxide solution and its sonocatalytic activity
906
INVESTIGATION ON THE TRANSPORT PROCESS OF FLUE GAS DESULFURIZATION IN A CIRCULATING FLUIDIZED BED
907
Investigation on the tribological properties of boron and lanthanum permeated mild steel
908
Investigation on the tribology of Zr ion implanted tool steel
909
Investigation on the Trophic Status of Ekbatan Reservoir: A Drinking Water Supply Reservoir in Iran
910
Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method
911
Investigation on the understanding and implementation of food allergen management among Thai food manufacturers
912
Investigation on the Usage of Some Non-Almandine Garnet Minerals as Abrasive Material in Waterjet Cutting
913
Investigation on the use of triphenyl bismuth as radiopacifier for (di)methacrylate dental adhesives
914
Investigation on the using of linco-spectin solution for in ovo administration in chicken embryo
915
Investigation on the valence of Cr ions in LiAlO2
916
Investigation on the valence state of Te ions in the Bi6Ti5TeO22 thin film using X-ray photoelectron spectroscopy
917
Investigation on the Values of International Parishan Lake’s Plants
918
Investigation on the variation in the fine structure of plasma-polymerized composite membrane by positron annihilation spectroscopy
919
Investigation on the variation of deep drawability of STS304 using FEM simulations
920
Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process
921
Investigation on the Weibull parameters identification for local approach application in the ductile to brittle transition regime
922
Investigation on the weldline strength of thin-wall injection molded ABS parts
923
INVESTIGATION ON THE WHIRLING MOTION OF FULL ANNULAR ROTOR RUB
924
Investigation on the xylitol aqueous-phase reforming performance for pentane production over Pt/HZSM-5 and Ni/HZSM-5 catalysts
925
Investigation on the zirconia phase transition under irradiation
926
Investigation on thermal and trace element characteristics during co-combustion biomass with coal gangue
927
Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability
928
Investigation on thermal performance calculation of two type solar air collectors using artificial neural network
929
Investigation on thermal performance of glazed solar chimney walls q
930
Investigation on thermal performance of high temperature multilayer insulations for hypersonic vehicles under aerodynamic heating condition
931
Investigation on thermal radiation spectra of coal ash deposits
932
Investigation on thermal stability of Ta2O5, TiO2 and Al2O3 coatings for application at high temperature
933
Investigation on thermal, electrical, and electrochemical properties of scandium-doped Pr0.6Sr0.4(Co0.2Fe0.8)(1−x)ScxO3−δ as cathode for IT-SOFC
934
Investigation on thermochemical behavior of co-pyrolysis between oil-palm solid wastes and paper sludge
935
Investigation on thermochemical behaviour of low rank Malaysian coal, oil palm biomass and their blends during pyrolysis via thermogravimetric analysis (TGA)
936
Investigation on thermo-mechanical behaviors of artificial muscle films
937
Investigation on thermomechanical fracture in the framework of configurational forces
938
Investigation on thermotropic liquid crystalline and photocrosslinkable polyarylidene arylphosphate esters containing cyclohexanone units
939
Investigation on three new metal carboxydiphosphonates: Syntheses, structures, magnetic and luminescent properties
940
Investigation on three seawater desalination processes coupled with NHR-200 Original Research Article
941
Investigation on three-dimensional stress concentration of LY12-CZ plate with two equal circular holes under tension
942
Investigation on three-dimensional temperature field of human knee considering anatomical structure
943
Investigation on thrust in vibration drilling of fiber-reinforced plastics
944
Investigation on Ti6Al4V laser welding using statistical and Taguchi approaches
945
Investigation on TIG welding of SiCp-reinforced aluminum–matrix composite using mixed shielding gas and Al–Si filler
946
Investigation on Tin Electrodeposition from Sulphuric Acid Medium
947
Investigation on TiO2-coated optical fibers for gas-phase photocatalytic oxidation of acetone
948
Investigation on Tm3+-doped silicate glass for 1.8 μm emission
949
Investigation on transient behaviors of flat plate heat pipes
950
Investigation on transition crystal of ordinary rutile TiO2 powder and its sonocatalytic activity
951
Investigation on transition crystal of ordinary rutile TiO2 powder and its sonocatalytic activity
952
Investigation on transonic round convex-corner flows
953
Investigation on transport properties of strained La0.85Ba0.15MnO3 thin films using hall measurement
954
Investigation on traveling wave thermoacoustic heat engine with high pressure amplitude
955
Investigation on Turbulent Nanofluid Flow in Helical Tube in Tube Heat Exchangers
956
Investigation on twisting distortion of thin plate stiffened structure under welding
957
Investigation on two-dimensional band structures of trans-polyacetylene doped with n-type dopant
958
Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root
959
Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root
960
Investigation on ultraviolet photoconductivity in p-type ZnO thin films
961
Investigation on upconversion photoluminescence of Bi3TiNbO9:Er3+:Yb3+ thin films
962
Investigation on up-flow anaerobic sludge fixed film (UASFF) reactor for treating low-strength bilge water of Caspian Sea ships
963
Investigation on Vapor Diffusion Resistance Factor in Porous Materials
964
Investigation on vapor-cooled current leads operating in a pulse mode Original Research Article
965
Investigation on vapor–liquid equilibria for binary systems of metal ion-containing ionic liquid [bmim]Zn2Cl5/NH3 by experiment and modified UNIFAC model
966
Investigation on vapor–liquid equilibrium for 2-propanol + 1-butanol + 1-pentanol at 101.3 kPa
967
Investigation on vibrational and structural properties of amorphous alloys produced by mechanical alloying by Raman spectroscopy, X-ray diffraction, EXAFS and RMC simulations
968
Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings
969
Investigation on volatile profile, lipid fraction degradation and antioxidant content of tomato-based pâtés as a function of ingredient formulation
970
Investigation on vortex shedding of a swept-back wing
971
Investigation on water consumption characteristics and water use efficiency of poplar under soil water deficits on the Loess Plateau
972
Investigation on water soluble organic compounds in fog droplets and interstitial aerosol particles
973
Investigation on water vapor effect on direct sulfation during wet-recycle oxy-coal combustion
974
Investigation on water–rock interaction under geothermal hot dry rock conditions with a novel testing method
975
Investigation on wear and corrosion behavior of Cu–graphite composites prepared by electroforming
976
Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718
977
Investigation on wear behaviors of high-vanadium high-speed steel compared with high-chromium cast iron under rolling contact condition
978
Investigation on wear mechanism of thermochemically fabricated W–Cu composites
979
Investigation on wetted area and film thickness for falling film liquid desiccant regeneration system
980
Investigation on wind power potential on Hong Kong islands—an analysis of wind power and wind turbine characteristics
981
Investigation on withdrawal resistance of various screws in face and edge of wood–plastic composite panel
982
Investigation on wood pellet quality and relationship between ash content and the most important chemical elements
983
Investigation on yield and some agronomic and breeding characteristics of basil masses
984
Investigation on yield and yield components of Zea mays L. under drought stress condition
985
Investigation on yield of lettuce and garlic intercropping in rice harvested lands
986
Investigation on zero grid-electricity design strategies of solid oxide fuel cell trigeneration system for high-rise building in hot and humid climate
987
Investigation on zirconium-coated polyurethane surfaces with regard to biocompatibility
988
Investigation on Zoonotic Cutaneous Leishmaniasis, Southern Iran
989
Investigation Physiological and Biochemical Characteristics of Sorghum (Sorghum bicolor L., var. Kimia) Affected Zeolite Consumption under Water Deficit Situation
990
Investigation procedures for the diagnosis of historic masonries
991
Investigation program to assess slug impact consequences on a reactor upper head
992
Investigation Progressive Collapse of K-Model Steel Truss Bridge under Additional Live Load Following Bridge Repairs
993
Investigation properties of Au–porous a-Si0.70C0.30 as humidity sensor
994
Investigation protocol: Acromegaly and its investigation
995
Investigation protocol: adrenal enlargement
996
Investigation Rate of Emotional Intelligence in Physical Education Teachers in Zanjan Province
997
Investigation Reducing Detrimental Effects of Salt Stress on Morphological and Physiological Traits of (Thymus vulgaris) by Application of Salicylic Acid
998
Investigation Response of Wheat Genotypes to Different level of Nitrogen Fertilizer, Crop Production, Seed Growth Trend and Correlation Between Traits
999
Investigation Role of Vermicompost to Improve Quantitative and Qualitative Characteristics of Corn (Zea mays L.) Production
1000
Investigation sand dune stabilization using the Acrylamide Co Acrylic Acid Polymer: a laboratory study