<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal and water management in irrigating lands in the arid and semi-arid regions
2
Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system
3
Thermal and water storage characteristics of super-absorbent polymer gel which absorbed aqueous solution of calcium chloride
4
Thermal and water transfer in PEMFCs: Investigating the role of the microporous layer
5
Thermal and wear analysis of an elastic beam in sliding contact
6
Thermal and wind structure of the Martian thermosphere as given by two General Circulation Models
7
Thermal and x-ray measurements in smectic phases of the PBnA liquid crystal family
8
Thermal and XRD analysis of synthesis of fluoro-topaz
9
Thermal and -γ –Ray Irradiation Effects on the Ionic Conductivity of (LiCl)x(Montmorillonite)1-x
10
Thermal anemometric assessment of coronary flow reserve with a pressure-sensing guide wire: An in vitro evaluation
11
Thermal anisotropy in sintered cordierite monoliths
12
Thermal anisotropy of epoxy resin-based nano-hybrid films containing BN nanosheets under a rotating superconducting magnetic field
13
Thermal anneal activation of defects in hydrogen plasma-treated silicon
14
Thermal anneal activation of defects in hydrogen plasma-treated silicon
15
Thermal annealing and air exposing effect on the graphene/silicon Schottky junctions
16
Thermal annealing and optical darkening effects in CsI(Tl) crystals
17
Thermal annealing and optical darkening effects in CsI(Tl) crystals
18
Thermal annealing as a method to predict results of high temperature irradiation embrittlement
19
Thermal annealing as a new simple method for PTFE texturing
20
Thermal annealing behavior and structure development of crystalline hard segment domain in a melt-quenched thermoplastic polyurethane
21
Thermal annealing behaviour and defect evolution of helium in fully stabilised zirconia
22
Thermal annealing behaviour of Pd Schottky contacts on melt-grown single crystal ZnO studied by IV and CV measurements
23
Thermal annealing dependence of some optical properties of plasma-modified porous silicon
24
Thermal annealing dependence of the structural, optical and electrical properties of selenium–tellerium films
25
Thermal annealing effect of alkanethiol monolayers on Au(1 1 1) in air
26
Thermal annealing effect on 1.3-(mu)m GaInNAs/GaAs quantum well structures capped with dielectric films
27
Thermal annealing effect on nanostructured TiO2 microsensors by supersonic cluster beam deposition
28
Thermal annealing effect on the crystallization and optical dispersion of sprayed V2O5 thin films Original Research Article
29
Thermal annealing effect on the photoluminescence properties of unstrained GaInAsSb/InP single quantum well grown by MOVPE
30
Thermal annealing effect on Y2O3:Eu3+ phosphor films prepared by yttrium 2-methoxyethoxide sol–gel precursor
31
Thermal annealing effects of C22-Quinolium(TCNQ) Langmuir-Blodgett films
32
Thermal annealing effects on a compositionally graded SiGe layer fabricated by oxidizing a strained SiGe layer
33
Thermal annealing effects on chemical states of deuterium implanted into boron coating film
34
Thermal annealing effects on Cu–Se resonant tunneling diodes fabricated by electrodeposition-assisted template synthesis technique
35
Thermal annealing effects on morphology and electrical response in ultrathin film organic transistors
36
Thermal annealing effects on Ni/Au contacts to p type GaN in different ambient
37
Thermal annealing effects on polyaniline studied by electrically detected magnetic resonance
38
Thermal annealing effects on structural properties of Si-doped/undoped a-CHthin films
39
Thermal annealing effects on the dynamic photoresponse properties of Al-doped ZnO nanowires network
40
Thermal annealing effects on the structural and electrical properties of PMN–PZ–PT ternary thin films deposited by a sol–gel process
41
Thermal annealing in FHD Ge-doped SiO2 film for applications in optical waveguides
42
Thermal annealing induced high performance light-emitting diodes based on poly(9,9′-dioctyl fluorene)
43
Thermal Annealing Influence over Optical Properties of Thermally Evaporated SnS/CdS Bilayer Thin Films
44
Thermal annealing mechanisms of latent fission tracks: Apatite vs. zircon
45
Thermal annealing of a-Si/Au superlattice thin films
46
Thermal annealing of coal at high temperature and high pressure. Effects on fragmentation and on rate of combustion, gasification and oxy-combustion
47
Thermal annealing of defects in highly defective NiO nanoparticles studied by X-ray and electron spectroscopies
48
Thermal annealing of GaSb quantum dots in GaAs formed by droplet epitaxy
49
Thermal annealing of heavy ion latent tracks in soda and BP-1 phosphate glasses
50
Thermal annealing of interface traps and trapped charges induced by irradiation in oxides of 3C-SiC metal-oxide-semiconductor structures
51
Thermal annealing of interface traps and trapped charges induced by irradiation in oxides of 3C-SiC metal-oxide-semiconductor structures
52
Thermal annealing of Nb/Al-AlO/sub x//Nb Josephson junctions
53
Thermal Annealing of Neutron Irradiated Ammonium and Potassium Dichromate
54
Thermal annealing of shear bands in deformed metallic glasses: Recovery mechanisms in Cu64Zr36 studied by molecular dynamics simulations Original Research Article
55
Thermal annealing of SiC thin films with varying stoichiometry
56
Thermal annealing of unetched fission tracks in apatite
57
Thermal annealing study of F center clusters in LiF single crystals
58
Thermal annealing study of F center clusters in LiF single crystals
59
Thermal annealing synthesis of titanium-dioxide nanowire–nanoparticle hetero-structures
60
Thermal annealing-induced electric dipole relaxation in natural alexandrite
61
Thermal anomalies detection before earthquake using three filters (Fourier, Wavelet and Logarithmic Differential Filter), A Case study of two earthquakes in Iran
62
Thermal anomalies in fumaroles at Vulcano island (Italy) and their relationship with seismic activity
63
Thermal anomaly detection using NARX neural network method to estimate the earthquake occurrence time
64
Thermal anomaly, heat index and urban heat island during the Hajj season in Saudi Arabia
65
Thermal applicability of two-phase thermosyphons in cooking chambers––experimental and theoretical analysis
66
Thermal architecture design tests for the Planck/HFI instrument
67
Thermal architecture design tests for the Planck/HFI instrument
68
Thermal aspects in the face grinding of ceramics
69
Thermal aspects of c-Si photovoltaic module energy rating
70
Thermal aspects of open sun drying of various crops
71
Thermal Aspects Related to Power Assemblies
72
Thermal aspects, material considerations and cooling strategies in cryogenic machining
73
Thermal assembly of a biomimetic mineral/collagen composite
74
Thermal Assessment of a Novel Thermal Diode Solar Water Heater Using Different Heat Transfer Fluids: An Experimental Study
75
Thermal assessment of heat mitigation strategies: The case of Portland State University, Oregon, USA
76
Thermal assisted ultrasonic bonding method for poly(methyl methacrylate) (PMMA) microfluidic devices
77
Thermal atropisomerism of fully functionalized vancomycin CD, DE, and CDE ring systems
78
Thermal augmentation in circular tube with twisted tape and wire coil turbulators
79
Thermal balance analysis of activated-sludge process for pig slurry treatment
80
Thermal balance of a four stroke SI engine operating on hydrogen as a supplementary fuel
81
Thermal balance of a LPG fuelled, four stroke SI engine with water addition
82
Thermal balance of a single cylinder diesel engine operating on alternative fuels
83
Thermal balance of livestock: 1. A parsimonious model
84
Thermal balance of livestock: 2. Applications of a parsimonious model
85
Thermal Balance of On-Stream Storm-Water Management Pond
86
Thermal Balloon Ablation Versus Endometrial Resection for the Treatment of Abnormal Uterine Bleeding
87
Thermal Balloon Endometrial Ablation in the Treatment of Heavy Menstrual Bleeding
88
Thermal barrier coating effect on stress and temperature distribution of diesel engines cylinder heads using a twolayer viscoelasticity model with considering viscosity effects
89
Thermal barrier coating made of porous zirconium oxide on a nickel-based single crystal superalloy formed by plasma electrolytic oxidation
90
Thermal barrier coating systems — analysis of nanoindentation curves
91
Thermal barrier coating toughness: Measurement and identification of a bridging mechanism enabled by segmented microstructure
92
Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient
93
Thermal barrier coatings deposited by laser CVD
94
Thermal barrier coatings for enhanced efficiency of gas turbine engines
95
Thermal barrier coatings on γ-TiAl protected by the halogen effect
96
Thermal barrier coatings with (Al2O3–Y2O3)/(Pt or Pt–Au) composite bond coat and 8YSZ top coat on Ni-based superalloy
97
Thermal barrier coatings with two layer bond coat on intermetallic compound Ni3Al based alloy
98
Thermal bath effect on soliton propagation in three-level atomic system
99
Thermal batteries modeling, self-discharge and self-heating
100
Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
101
Thermal Behavior Analysis of Semi-Open Space in Residential Complexes of Mashhad County with the help of Honeybee Energy Plus Software
102
Thermal behavior and catalytic activity in naphthalene destruction of Ce-, Zr- and Mn-containing oxide layers on titanium
103
Thermal behavior and characteristics of fired geopolymers produced from local Cameroonian metakaolin
104
Thermal behavior and combustion mechanism of high-nitrogen energetic materials DHT and BTATz
105
Thermal behavior and compatibility analysis of the new chemical entity LPSF/FZ4
106
Thermal Behavior and Crystal Structure at 435 K of the Mixed Rubidium Ammonium Sulfate Tellurate Rb1.12(NH4) 0.88SO4·Te(OH)6
107
Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis
108
Thermal behavior and decomposition kinetics of Viton A bonded explosives containing attractive cyclic nitramines
109
Thermal behavior and decomposition of kaolinite–potassium acetate intercalation composite
110
Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments
111
Thermal behavior and effect of heat treatment in an inert gas on oxidized carbon microcoils Original Research Article
112
Thermal behavior and gaseous emission analysis during co-combustion of ethanol fermentation residue from food waste and coal using TG–FTIR
113
Thermal behavior and gaseous emission analysis during co-combustion of ethanol fermentation residue from food waste and coal using TG–FTIR
114
Thermal behavior and gelling interactions of Mesona Blumes gum and rice starch mixture
115
Thermal behavior and glass transition of Zr-based bulk metallic glasses
116
Thermal behavior and glass transition of Zr-based bulk metallic glasses
117
Thermal behavior and hydration properties of yeast proteins from Saccharomyces cerevisiae and Kluyveromyces fragilis
118
Thermal behavior and hydrogen production of methanol steam reforming and autothermal reforming with spiral preheating
119
Thermal behavior and ice-table depth within the north polar erg of Mars
120
Thermal behavior and kinetics of bio-ferment residue/coal blends during co-pyrolysis
121
Thermal behavior and kinetics of crude oils at low heating rates by differential scanning calorimeter
122
Thermal behavior and kinetics of the pyrolysis of the coal used in the COREX process
123
Thermal behavior and kinetics of the pyrolysis of the coal used in the COREX process
124
Thermal behavior and kinetics of the pyrolysis of the raw/steam exploded poplar wood sawdust
125
Thermal behavior and kinetics of the pyrolysis of the raw/steam exploded poplar wood sawdust
126
Thermal behavior and mechanical properties of physically crosslinked PVA/Gelatin hydrogels
127
Thermal behavior and molecular simulation of liquid crystalline polymers containing a pentamethylenic spacer
128
Thermal behavior and nucleation kinetics of 1,5-dimethyl-2-nitroimino-1, 3, 5-triazinane crystal Original Research Article
129
Thermal behavior and pyrolysis products of modified organo-layered silicates as intermediates for in situ polymerization
130
Thermal behavior and pyrolysis products of modified organo-layered silicates as intermediates for in situ polymerization
131
Thermal behavior and specific interaction in high glass transition temperature PMMA copolymer
132
Thermal behavior and the decomposition mechanism of electrochemically delithiated Li1−xNiO2
133
Thermal behavior and thermal decomposition study of porphyrin polymers containing different spacer groups
134
Thermal behavior during droplet-based deposition Original Research Article
135
Thermal behavior in a 180-deg turned channel with the perforation divider under rotational condition
136
Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet
137
Thermal behavior of 1,3,3-trinitroazetidine
138
Thermal behavior of 1,4-bis(4-trimellitimido-2-trifluoromethyl phenoxy)benzene (DIDA) solvated with polar organic solvents and properties of DIDA-based poly(amide-imide)s
139
Thermal behavior of 1,7-diamino-1,7-dinitrimino-2,4,6-trinitro-2,4,6-triazaheptane
140
Thermal behavior of 3,4,5-triamino-1,2,4-triazole nitrate
141
Thermal behavior of a building with a slanted roof
142
Thermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles
143
Thermal behavior of a conductor submitted to skin effect
144
Thermal behavior of a copolymer PV/Th solar system in low flow rate conditions
145
Thermal Behavior of a Multi-layered Thin Slab Carrying Periodic Signals Under the Effect of the Dual-Phase-Lag Heat Conduction Model
146
Thermal Behavior of a Natural Sepiolite
147
THERMAL BEHAVIOR OF A NEW TYPE OF MULTI-LAYERED POROUS AIR HEATER
148
Thermal behavior of a novel micro-fuel cell-based methanol concentration sensor
149
Thermal behavior of a novel type see-through glazing system with integrated PV cells
150
Thermal behavior of a porous electric heater
151
Thermal behavior of a series of monomeric Ni(II) complexes with β-iminoketones
152
Thermal behavior of a small salinity-gradient solar pond with wall shading effect
153
Thermal Behavior of a Stagnant Gas Confined in a Horizontal Microchannel as Described by the Dual-Phase-Lag Heat Conduction Model
154
Thermal behavior of a zinc–chromium–sulfate lamellar double hydroxide revisited as a function of vacuum and moisture parameters Original Research Article
155
Thermal Behavior of Activated Carbon Cloths Heated by Joule Effect
156
Thermal behavior of Al/MoO3 xerogel nanocomposites
157
Thermal Behavior of Alkaline Lead Acetate, a Study of Thermogravimetry and Differential Scanning Calorimetry
158
Thermal behavior of aluminum fluoride trihydrate
159
Thermal behavior of aluminum powder and potassium perchlorate mixtures by DTA and TG
160
Thermal behavior of an electrical motor through a reduced model
161
Thermal behavior of Bi5Pb3O10.5
162
Thermal behavior of biodegraded lime wood Original Research Article
163
Thermal behavior of brominated and polybrominated compounds I: closed vessel conditions
164
Thermal behavior of brominated and polybrominated compounds II: Pyroproducts of brominated phenols as mechanistic tools
165
Thermal behavior of building material containing microencapsulated PCM
166
Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus
167
Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose
168
Thermal behavior of cement matrix with high-volume mineral admixtures at early hydration age
169
Thermal behavior of chromium electroplating sludge
170
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
171
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
172
Thermal behavior of coal-tar pitch modified with BMI resin
173
Thermal behavior of coal-tar pitch modified with BMI resin
174
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
175
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
176
Thermal behavior of Cu–Co bimetallic clusters
177
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
178
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
179
Thermal behavior of delithiated Li(Ni0.8Co0.15Al0.05)O2 and Li1.1(Ni1/3Co1/3Mn1/3)0.9O2 powders
180
Thermal Behavior of Double Skin Facade in Terms of Energy Consumption in the Climate of North of Iran-Rasht
181
Thermal behavior of Et4N10BH4 and (Et4N)2B20H18
182
Thermal behavior of ethylene/1octene copolymer fractions at high temperatures: Effect of hexyl branch content
183
Thermal behavior of floating gate oxide defects (moving bits)
184
Thermal behavior of fullerenes in different gas atmospheres Original Research Article
185
Thermal behavior of GeO2 doped PbO–B2O3–ZnO–Bi2O3 glasses
186
Thermal behavior of goethite during transformation to hematite
187
Thermal behavior of gum arabic in comparison with cashew gum
188
Thermal behavior of horizontally mixed surfaces on Mars
189
Thermal behavior of hydrogen atom intercalated between two layers of C150H30 graphite plane: MD simulation Original Research Article
190
Thermal behavior of isotactic polypropylene freeze-extracted from solutions with varying concentrations
191
Thermal behavior of K2MSi3O9·H2O with the structure of umbite (M = Sn) and kostylevite (M = Pb) minerals
192
Thermal behavior of lignocellulosic materials under aerobic/anaerobic environments
193
Thermal behavior of liquefied wood polymer composites (LWPC)
194
Thermal behavior of longitudinal convective–radiative porous fins with different section shapes and ceramic materials (SiC and Si3N4)
195
Thermal behavior of magnetically modalized poly(N-isopropylacrylamide)-chitosan based nanohydrogel
196
Thermal behavior of masonry walls in Istanbul
197
Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling
198
Thermal behavior of mixtures of bentonitic clay and saline solutions
199
thermal behavior of monocrystalline silicon solar cells: a numerical and experimental investigation on the module encapsulation materials
200
Thermal behavior of nano-silver clay in the application of handmade jewelry
201
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
202
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
203
Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion Original Research Article
204
Thermal behavior of Ni- and Cu-containing plasma electrolytic oxide coatings on titanium
205
Thermal behavior of nitrided TiO2/In2O3 by TG–DSC–MS combined with PulseTA
206
Thermal behavior of novel non-sonicated arsonolipid-containing liposomes Original Research Article
207
Thermal behavior of organotin(IV) triazolates: Molecular precursors for pure-phase, nanosized SnS/SnO2
208
Thermal behavior of overcharged nickel/metal hydride batteries
209
Thermal Behavior of Oxometalate (Mo, W)-Intercalated Layered Double Hydroxides: Study of the Grafting Phenomenon
210
Thermal behavior of pentaerythritol diazido dinitrate
211
Thermal Behavior of Perfect and Imperfect Contact Composite Slabs Under the Effect of the Hyperbolic Heat Conduction Model
212
Thermal behavior of phosphorus derivatives of hydrogenated cardanol
213
Thermal behavior of polarized Pd/D electrodes prepared by co-deposition
214
Thermal behavior of polyacetylacetonatozirconium (PAZ)
215
Thermal behavior of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends
216
Thermal behavior of Si-doped fullerenes vs their structural stability at T = 0 K: A density functional study
217
Thermal behavior of silver-containing mesogenic cyanobiphenyl films
218
Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles
219
Thermal behavior of sol–gel derived phosphate ceramics Original Research Article
220
Thermal behavior of spiral fin-and-tube heat exchanger having fly ash deposit
221
Thermal behavior of SrSO4–SrCO3 and SrSO4–SrCO3–Al2O3 mixtures
222
Thermal behavior of Sterculia striata oil
223
Thermal behavior of substituted FeCo-based metallic glasses
224
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
225
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
226
Thermal behavior of surface plasmon resonance in dynamic suprastructure multilayer
227
Thermal behavior of syndiotactic E-1,2-poly(3-methyl-1,3-pentadiene)
228
Thermal behavior of tetrapyrrole derivatives and their mixed complexes
229
Thermal behavior of the amorphous precursors in the ZrO2–CrO1.5 system
230
Thermal behavior of the amorphous precursors of the HfO2–Fe2O3 system
231
Thermal behavior of the amorphous precursors of the ZrO2–SnO2 system
232
Thermal behavior of the epoxy and polyester powder coatings using thermogravimetry/differential thermal analysis coupled gas chromatography/mass spectrometry (TG/DTA–GC/MS) technique: identification of the degradation products
233
THERMAL BEHAVIOR OF THE INDIUM PARTICLES DISPERSED IN OIL
234
Thermal behavior of the KSbMoO6 ionic conductive ceramic
235
Thermal behavior of the KSbMoO6 ionic conductive ceramic
236
Thermal behavior of the LHCD launchers in Tore Supra
237
Thermal behavior of the nonstoichiometric lithium niobate powders synthesized via a combustion method
238
Thermal behavior of the phenol–Pd–ACC system Original Research Article
239
Thermal behavior of the roughened Cu(110) surface
240
Thermal behavior of the saccharinates of K+, Na+, Rb+, Cs+ and NH4+: structural inferences
241
Thermal behavior of the YAG precursor prepared by sol–gel combustion process
242
Thermal behavior of Ti-precursor sols for porous TiO2 thin films
243
Thermal Behavior of Up to Down Vertical Flame Using Iraqi (LPG) As Fuel
244
Thermal behavior of vanadocene
245
Thermal behavior of vanadyl complexes with Schiff bases derived from trans-N,N′-bis(salicylidene)-1,2-cyclohexadiamine (t-Salcn)
246
Thermal behavior of various zinc cyclo-phosphates
247
THERMAL BEHAVIOR OF WATER FLOWING THROUGH PACKED BED SUBJECTED TO WALL HEAT FLUX
248
Thermal behavior of Zn and Cd complexes intercalated into γ-zirconium phosphate: Synthesis and physical–chemical characterization
249
Thermal Behavior of α-Alkylated Oligothiophenes
250
Thermal behavior, FT-IR spectroscopy and water durability of Li_2O–PbO–ZnO–P_2O_5 glasses
251
Thermal behavior, microstructure and protein quality of squid fillets dried by far-infrared assisted heat pump drying
252
Thermal behavior, microstructure, phase transformation, and crystal growth kinetics of nano-scale Fe3+-doped TiO2 xerogel powders
253
Thermal behaviors and grafting process of LDH/benzene derivative hybrid systems
254
Thermal behaviors of Al-based amorphous alloys bearing nanocrystalline In particles Original Research Article
255
Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels
256
Thermal behaviors of doped polyaniline
257
Thermal behaviors of intrinsic polyaniline and its derivatives
258
Thermal behaviors of lithium in and on the two layers of C150H30 graphite plane: MD simulation Original Research Article
259
Thermal behaviors of lithium-ion cells during overcharge
260
Thermal behaviors of mechanically activated pyrites by thermogravimetry (TG)
261
Thermal behaviors of Ni-MH batteries using a novel impedance spectroscopy
262
Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method
263
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
264
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
265
Thermal Behaviour and Improved Properties of SBR and SBR/Natural Bitumen Modified Bitumens
266
Thermal behaviour and interactions of cassava starch filled with glycerol plasticized polyvinyl alcohol blends
267
Thermal behaviour and kinetic study for woody biomass torrefaction and torrefied biomass pyrolysis by TGA
268
Thermal behaviour and kinetics of alga Polysiphonia elongata biomass during pyrolysis
269
Thermal behaviour and kinetics of coal/biomass blends during co-combustion
270
Thermal behaviour and reactivity of green petroleum cokes used as additives in metallurgical cokemaking
271
Thermal behaviour and structural properties of surfactant—Picrate compounds: The effect of the ammonium headgroup number
272
Thermal behaviour and superheating temperature of Kaolinite from molecular dynamics
273
Thermal behaviour and transport properties of liquid crystalline polymers: Phase organization in a thermotropic polyester
274
Thermal behaviour and ventilation efficiency of a low-cost passive solar energy efficient house
275
Thermal behaviour during the pyrolysis of low rank perhydrous coals
276
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
277
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
278
Thermal behaviour of a direct-current traction motor driving a railway train
279
Thermal behaviour of a heated building under random weather condition in Warsaw
280
Thermal behaviour of a series of poly[B-(methylamino)borazine] for the preparation of boron nitride fibers
281
Thermal behaviour of a zeolitic tuff
282
Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers
283
Thermal behaviour of adobe constructions
284
Thermal behaviour of alumina precursor obtained by the aluminium sulphate–urea reaction in boiling aqueous solution
285
Thermal behaviour of aluminas with different morphologies
286
Thermal behaviour of aluminas with different morphologies
287
Thermal behaviour of an eighteenth-century Athenian dwelling
288
Thermal behaviour of arsenic oxides (As2O5 and As2O3) and the influence of reducing agents (glucose and activated carbon)
289
Thermal behaviour of CANDU type fuel rods during steady state and transient operating conditions
290
Thermal behaviour of carbonaceous aerosol from a continental background site
291
Thermal behaviour of cesium implanted in cubic zirconia
292
Thermal behaviour of chlorine in nuclear graphite at a microscopic scale
293
Thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned solid wastes with calcium hydroxide
294
Thermal behaviour of clay mixtures with bauxite residue for the production of heavy-clay ceramics
295
Thermal behaviour of clays for traditional ceramics with soda–lime–silica waste glass admixture
296
Thermal behaviour of closed wet cooling towers for use with chilled ceilings
297
Thermal behaviour of coal/biomass blends during co-pyrolysis
298
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
299
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
300
Thermal behaviour of CorSirWrSi multilayers under rapid thermal annealing
301
Thermal behaviour of CpCuPEt3 in gas phase and Cu thin films processing
302
Thermal behaviour of crystal and domain structure of LSGMn-05 anode material for SOFC
303
Thermal behaviour of Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides and characterization of formed oxides
304
Thermal behaviour of CuO doped phase-stabilised ammonium nitrate
305
Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale
306
Thermal behaviour of front-end multi-chip modules
307
Thermal behaviour of front-end multi-chip modules
308
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
309
Thermal behaviour of geothermal wells using mud and air–water mixtures as drilling fluids
310
Thermal behaviour of hard nanocomposite coatings within the W–Si–N system in oxidant and protective atmospheres
311
Thermal behaviour of helium-implanted spinel single crystals
312
Thermal behaviour of high-temperature superconducting fault current limiters: Application to microlimiters Original Research Article
313
Thermal behaviour of hydrated lysozyme in the presence of sucrose and trehalose by EINS
314
Thermal behaviour of hydrogen in Zircaloy corrosion layers
315
Thermal behaviour of induction motors under different speeds
316
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
317
Thermal behaviour of integrated solar collector/storage unit with 65 °C phase change material
318
Thermal behaviour of interactive mechanically ventilated double glazed façade: Non-dimensional analysis
319
Thermal behaviour of La0.8Sr0.2Fe1−xGaxO3−δ (x = 0 or x = 0.3)
320
Thermal behaviour of lignocellulosic material in the presence of phosphoric acid. Influence of the acid content in the initial solution
321
Thermal behaviour of low and high molecular weight paraffin waxes used for designing phase change materials
322
Thermal behaviour of lyophilized egg yolk and egg yolk fractions Original Research Article
323
Thermal behaviour of magnesium-containing fluorapatite
324
Thermal behaviour of malonic acid, sodium malonate and its compounds with some bivalent transition metal ions
325
Thermal behaviour of mandelic acid, sodium mandelate and its compounds with some bivalent transition metal ions
326
Thermal behaviour of mechanochemically synthesized nanocrystalline CuS
327
Thermal behaviour of medical grade silicone oils
328
Thermal behaviour of mixed alumina–silica gels obtained from alkoxides: Phase formation and morphology of powders
329
Thermal behaviour of mixed ligand Co(II), Ni(II) and Cu(II) complexes containing terephthalate ligands
330
Thermal behaviour of NaBH4-sodalites with alumosilicate framework: Influence of cage water content and the surrounding conditions
331
Thermal behaviour of nickel/metal hydride batteries during charge and discharge
332
Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies
333
Thermal behaviour of oil contaminated residues from metal cutting
334
Thermal behaviour of Pd40Cu30Ni10P20 bulk metallic glass Original Research Article
335
Thermal behaviour of phase-change slurries incorporating hydrated hydrophilic polymeric particles
336
Thermal behaviour of plasma-sprayed Mo coating on cast-iron substrate
337
Thermal behaviour of poly(acryloyloxybenzoic acid)/nylon 6 blends
338
Thermal behaviour of poly(methacrylic acid)/poly(N-vinyl-2-pyrrolidone) complexes
339
Thermal behaviour of polycrystalline [Ba(H2O)3](ClO4)2 and [Ba(NH3)4](ClO4)2
340
Thermal behaviour of polyoxocarbosilane shells in Fe-based (core)–polyoxocarbosilane (shell) nanocomposites
341
Thermal behaviour of pure and binary Fe(NO3)3·9H2O and (NH4)6Mo7O24·4H2O systems
342
Thermal behaviour of pyrope at 1000 and 1100 °C: mechanism of Fe2+ oxidation and decomposition model
343
Thermal behaviour of redeposited layer under high heat flux exposure
344
Thermal behaviour of rollers during the rolling process
345
Thermal behaviour of solar air heater with compound parabolic concentrator
346
Thermal behaviour of some rhodium(II) cycloalkanocarboxylate complexes
347
Thermal behaviour of some spiro benzodiazepine derivatives
348
Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers Original Research Article
349
Thermal behaviour of succinic acid, sodium succinate and its compounds with some bivalent transition metal ions
350
Thermal behaviour of the consumable electrode in the vacuum arc remelting process
351
Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2 • 4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2 • 2H2O
352
Thermal behaviour of titanium seleno-telluride Ti5Ch8 in Ar and N2 atmospheres
353
Thermal behaviour of ultra-thin Co overlayers on rutile TiO2(1 0 0) surface
354
Thermal behaviour of unsaturated polyester resins + poly(3-octylthiophene) blends
355
Thermal behaviour of xenon in zirconium carbide at high temperature: Role of residual zirconia and free carbon
356
Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass
357
Thermal behaviour of α-hydroxyisobutyric acid, sodium α-hydroxyisobutyrate and its compounds with some bivalent transition metal ions
358
Thermal behaviour of β-anhydrite CaSO4 to 1,263 K
359
Thermal behaviour, phase transition and molecular motions in [Co(NH3)6](NO3)2
360
THERMAL BENDING ANALYSIS OF COMPOSITE LAMINATED CYLINDRICAL SHELLS USING A REFINED FIRST-ORDER THEORY
361
Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method
362
Thermal benefits of city parks
363
Thermal biology in insect-parasite interactions
364
Thermal biology, population fluctuations and implications of temperature extremes for the management of two globally significant insect pests
365
Thermal bleaching of optical absorption and photoluminescence spectra of γ-irradiated CaF2:Dy:Pb:Na single crystals
366
Thermal blob convection in spherical shells
367
Thermal blob size as determined by the intrinsic viscosity
368
Thermal bonding of microfluidic devices: Factors that affect interfacial strength of similar and dissimilar cyclic olefin copolymers
369
Thermal Bonding of Polymeric Capillary Electrophoresis Microdevices in Water
370
Thermal bosonisation in the sine-Gordon and massive Thirring models Original Research Article
371
Thermal bottomonium suppression at RHIC and LHC
372
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
373
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
374
Thermal boundary conditions for thermal lattice Boltzmann simulations
375
Thermal boundary conditions of local thermal non-equilibrium model for convection heat transfer in porous media
376
Thermal boundary resistance at the graphene–graphene interface estimated by molecular dynamics simulations
377
Thermal boundary resistance of nanocomposites
378
Thermal box-barrier for a direct measurement in high temperature environment
379
Thermal breakage of window glass in room fires conditions – Analysis of some important parameters
380
Thermal breakdown in solid dielectrics: A new approach
381
Thermal breakdown of calcium carbonate and constraints on its use as a biomarker
382
Thermal breakthrough analysis for determination of energy equilibrium data in a fluidized bed
383
Thermal bremsstrahlung photons probing the nuclear caloric curve
384
Thermal bremsstrahlung probing the thermodynamical state of multifragmenting systems Original Research Article
385
Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics
386
Thermal buckling analysis of cross-ply laminated composite beams with general boundary conditions
387
Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties
388
Thermal buckling analysis of functionally graded rectangular nanoplates based on nonlocal third-order shear deformation theory
389
THERMAL BUCKLING ANALYSIS OF INHOMOGENEOUS RECTANGULAR PLATE DUE TO UNIFORM HEAT SUPPLY
390
Thermal buckling analysis of moderately thick functionally graded annular sector plates
391
Thermal Buckling Analysis of Porous Conical Shell on Elastic Foundation
392
Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory
393
Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models
394
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
395
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
396
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
397
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
398
Thermal buckling and postbuckling analysis of functionally graded annular plates with temperature-dependent material properties
399
Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates
400
Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation
401
Thermal buckling and progressive ovalization of pipes: experiences at the TTS sodium test facility and their analysis Original Research Article
402
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model
403
Thermal buckling and vibration behavior of multi-layer rectangular viscoelastic sandwich plates
404
Thermal buckling behavior of composite laminated plates
405
Thermal buckling behavior of cross-ply hybrid composite laminates with inclined crack
406
Thermal Buckling Behavior of Hybrid-Composite Angle-Ply Laminated Plates with an Inclined Crack
407
THERMAL BUCKLING FOR LOCAL DELAMINATION NEAR THE SURFACE OF LAMINATED CYLINDRICAL SHELLS AND DELAMINATED GROWTH
408
Thermal Buckling Graded Beams of Functionally
409
Thermal buckling load optimization of angle-ply laminated cylindrical shells
410
Thermal buckling load optimization of laminated composite plates
411
Thermal buckling load optimization of laminated skew plates
412
Thermal buckling of a simply supported moderately thick rectangular FGM plate
413
Thermal buckling of angle-ply laminated composite and sandwich plates according to a global higher-order deformation theory
414
Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory
415
Thermal buckling of cross-ply laminated composite shallow shells according to a global higher-order deformation theory
416
Thermal buckling of FGM shells resting on a two-parameter elastic foundation
417
Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory
418
THERMAL BUCKLING OF FUNCTIONALLY GRADED CYLINDRICAL SHELL
419
Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory
420
THERMAL BUCKLING OF FUNCTIONALLY GRADED PLATES BASED ON HIGHER ORDER THEORY
421
Thermal buckling of functionally graded plates using a local Kriging meshless method
422
Thermal buckling of functionally graded rectangular plates subjected to partial heating
423
Thermal buckling of functionally graded rectangular plates subjected to partial heating
424
Thermal buckling of functionally graded skew and trapezoidal plates with different boundary conditions using the element-free Galerkin method
425
Thermal buckling of hybrid angle-ply laminated composite plates with a hole
426
Thermal buckling of hybrid laminated composite plates with a hole
427
THERMAL BUCKLING OF IMPERFECT CYLINDRICAL SHELLS
428
Thermal Buckling of Imperfect Functionally Graded Cylindrical Shells Based on the Wan-Donnell Model
429
Thermal buckling of imperfect functionally graded plates
430
Thermal buckling of initially compressed single-walled carbon nanotubes by molecular dynamics simulation Original Research Article
431
Thermal buckling of laminated cross-ply oval cylindrical shells
432
Thermal Buckling of Multi-Walled Carbon Nanotubes Based on a Rigorous van der Waals Interaction
433
Thermal buckling of rectangular plates
434
Thermal buckling of shear deformable temperature dependent circular/annular FGM plates
435
Thermal buckling of shear-deformable composite laminated plates by the spline finite strip method Original Research Article
436
Thermal buckling of simply supported functionally graded skew plates
437
Thermal Buckling of Simply Supported Piezoelectric FGM Cylindrical Shells
438
Thermal buckling of various types of FGM sandwich plates
439
Thermal buckling optimization of composite laminates by evolution strategies
440
Thermal buckling predictions of three types of high-order theories for the heterogeneous orthotropic plates, using the new version of DQM
441
Thermal buckling response of all-edge clamped rectangular plates with symmetric angle-ply lamination
442
Thermal buckling response of shear flexible laminated anisotropic plates using a three-node isoparametric element
443
Thermal buffering effect of alpine boulder field microhabitats in Australia: Implications for habitat management and conservation
444
Thermal building behaviour in summer: long-term data evaluation using simplified models
445
Thermal building simulation and computer generation of nodal models
446
Thermal bump removal of a crystal monochromator by designing an optimal shape
447
Thermal bump removal of a crystal monochromator by designing an optimal shape
448
Thermal burn and electrical injuries among electric utility workers, 1995–2004
449
Thermal burn of the pharynx and larynx after swallowing hot milk
450
Thermal burns with injury to the intestine in a congenital hernia sac
451
Thermal calculation for high-pressure contact metamorphism: application to eclogite formation in the Sebadani area, the Sambagawa belt, SW Japan
452
Thermal calibrations of hypervelocity capture in aerogel using magnetic iron oxide particles
453
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
454
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
455
Thermal catalytic cracking of buriti oil (Mauritia flexuosa L.) over LaSBA-15 mesoporous materials
456
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
457
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
458
Thermal C-glycosylation of d-glucal with trimethylsilyl cyanide
459
Thermal challenge problem: Summary Original Research Article
460
Thermal change during formation process of indium-tin-oxide transparent conductive films
461
Thermal changes and cure depths associated with a high intensity light activation unit
462
Thermal changes in clay products from alluvial deposits of the Indo–Gangetic plains
463
Thermal Changes in Root Surface of Primary Teeth During Root Canal Treatment With Diode Lasers: An In Vitro Study
464
Thermal Changes of Root Surface of Anterior Primary Teeth in Pulpectomy with Er:YAG Laser
465
Thermal characterisation of a tungsten magnetoresistive heat switch Original Research Article
466
Thermal characterisation of ceramic/metal joining techniques for fusion applications using X-ray tomography
467
Thermal characterisation of corn–lentil extruded snacks
468
Thermal characterisation of embedded heat spreading layers in rectangular heat-generating electronic modules
469
Thermal characterisation of gelatin extracted from yellowfin tuna skin and commercial mammalian gelatin
470
Thermal characterisation of microalgae under slow pyrolysis conditions
471
Thermal characterisation of microalgae under slow pyrolysis conditions
472
Thermal Characterisation of Poly(Methyl Methacrylate) Filled with Barium Titanate as Denture Base Material
473
Thermal characterisation of red clay from the Northern Region of Rio de Janeiro State, Brazil using an open photoacoustic cell, in relation to structural changes on firing
474
Thermal characterisation of the products of wastewater sludge pyrolysis
475
Thermal characterisation of the products of wastewater sludge pyrolysis
476
Thermal characteristics and kinetics of crude oils and SARA fractions
477
Thermal characteristics during hydrogen fueling process of type IV cylinder
478
Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem
479
Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts
480
Thermal characteristics in round tube fitted with serrated twisted tape
481
Thermal characteristics of a direct heat exchange system between granules with phase change material and air
482
Thermal characteristics of a double-glazed external wall system with roll screen in cooling season
483
Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications
484
Thermal characteristics of a high heat flux micro-evaporator
485
Thermal characteristics of a meta-aramid and cellulose insulated transformer at loads beyond nameplate
486
Thermal characteristics of a personal environment module task air conditioning system: an experimental study
487
Thermal characteristics of a premixed impinging circular laminar-flame jet with induced swirl
488
Thermal characteristics of a resurfaced condenser and evaporator closed two-phase thermosyphon
489
Thermal characteristics of a solar tank with aerogel surface insulation
490
Thermal characteristics of Agaricus bisporus mushroom: freezing point, glass transition, and maximal-freeze-concentration condition
491
Thermal characteristics of Al2O3–MgO and Al2O3–spinel castables for steel ladles
492
Thermal characteristics of an N2O catalytic igniter with metal foam for hybrid rocket motors
493
Thermal characteristics of an underground cold-water reservoir: Analytical and experimental studies
494
Thermal characteristics of combined thermoelectric generator and refrigeration cycle
495
Thermal characteristics of composite sandwich structures for machine tool moving body applications
496
Thermal characteristics of conduction cooled 600 kJ HTS SMES system Original Research Article
497
Thermal characteristics of electroosmotic flow in a wavy-wall microtube
498
Thermal characteristics of fatty acid copper(II) carboxylate complexes with nicotinamide and diethylnicotinamide ligands
499
Thermal characteristics of flaxseed (Linum usitatissimum L.) proteins
500
Thermal characteristics of freeze-dried camel milk and its major components
501
Thermal characteristics of high voltage whole-solid-insulated polymeric ZnO surge arrester
502
Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber
503
Thermal characteristics of humic and hymatomelanic acids of lake sapropels of the ob river right and left banks
504
Thermal characteristics of inclined plate impinged by underexpanded sonic jet
505
Thermal characteristics of induction heating in cold crucible used for directional solidification
506
Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat
507
Thermal characteristics of manganese (II) nitrate hexahydrate as a phase change material for cooling systems
508
Thermal characteristics of Ni–Fe–Ga–Mn and Ni–Fe–Ga–Co ferromagnetic shape memory alloys
509
Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes
510
Thermal characteristics of polyurethane foams incorporated with phase change materials
511
Thermal characteristics of porphyrin entrapped sol–gels during exposure to toxic gases
512
Thermal characteristics of quantum-cascade lasers by micro-probe optical spectroscopy
513
Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves
514
Thermal characteristics of solid–solid phase transitions in long-chain dialkyl ammonium salts
515
Thermal characteristics of the Main Himalaya Thrust and the Indian lower crust with implications for crustal rheology and partial melting in the Himalaya orogen
516
Thermal characteristics of turbulent rib-grooved channel flows
517
Thermal characteristics, chemical composition and polyphenol contents of date-pits powder Original Research Article
518
Thermal characteristics, Raman spectra and structural properties of new tellurite glasses within the Bi2O3–TiO2–TeO2 system
519
Thermal characterization and detailed kinetic analysis of Cassava starch thermo-oxidative degradation
520
Thermal characterization and kinetic analysis of non-isothermal decomposition process of Bauxite red mud. Estimation of density distribution function of the apparent activation energy
521
Thermal characterization and phase behavior of cornstarch studied by differential scanning calorimetry Original Research Article
522
Thermal characterization and physicochemical properties of Fe2O3–Mn2O3/Al2O3 system
523
Thermal characterization during dehydration of nitrifying and denitrifying microbiological mud encapsulated in silica gel
524
Thermal characterization in a circular tube fitted with inclined horseshoe baffles
525
Thermal characterization of a bridge-link carbon nanotubes array used as a thermal adhesive
526
Thermal characterization of a montmorillonite, modified with polyethylene-glycols (PEG1500 and PEG4000), by in situ HT-XRD and FT IR: Formation of a high-temperature phase
527
Thermal characterization of a Ni-based superalloy
528
Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film
529
Thermal Characterization of Agar Encapsulated in TiO2 Sol–Gel
530
Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes
531
Thermal characterization of an epoxy-based underfill material for flip chip packaging
532
Thermal characterization of chicken fat dry fractionation process Original Research Article
533
Thermal characterization of compact electronic systems: a portable PC as a study case
534
Thermal characterization of Cu60ZrxTi40−x metallic glasses (x=15, 20, 22, 25, 30)
535
Thermal characterization of CVD diamond film by photoacoustic method
536
Thermal Characterization of Eicosane/Graphite Nano-Composite-Based Phase Change Material
537
Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity
538
Thermal characterization of foam–cane (Quseab) as an insulant material
539
Thermal characterization of glasses prepared from simulated compositions of lunar soil JSC-1A
540
Thermal characterization of liquids and pastes using the flash technique
541
Thermal characterization of magnetically aligned carbonyl iron/agar composites
542
Thermal characterization of materials at high pressures
543
Thermal characterization of methylene blue intercalated montmorillonites by photoacoustic technique
544
Thermal characterization of mustard straw and stalk in nitrogen at different heating rates
545
Thermal characterization of new fire-insulating materials from industrial inorganic TiO2 wastes
546
Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage
547
Thermal characterization of oil extracted from ethylene–propylene–diene terpolymer residues (EPDM-r)
548
Thermal characterization of organically modified montmorillonite
549
Thermal characterization of overmolded underfill materials for stacked chip scale packages
550
Thermal characterization of piezoelectric and non-piezoelectric Lead Meta-Niobate
551
Thermal characterization of PMR polyimides
552
Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state
553
Thermal characterization of porous carbon foam—convection in parallel flow
554
Thermal characterization of porous graphitic foam – Convection in impinging flow
555
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
556
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
557
Thermal characterization of screen printed conductive pastes for RFID antennas
558
Thermal characterization of Se100−xSnx (x = 4, 6 and 8) chalcogenide glasses using differential scanning calorimeter
559
Thermal characterization of shrouded plate fin array on an LED backlight panel
560
Thermal characterization of softwood lignin modification by termite Coptotermes formosanus (Shiraki)
561
Thermal characterization of some new xanthine derivatives
562
Thermal characterization of the antiviral drug UC-781 and stability of its glass
563
Thermal characterization of the quercetin and rutin flavonoids
564
Thermal characterization of thermally conductive underfill for a flip-chip package using novel temperature sensing technique
565
Thermal characterization of titania-modified alumina-supported palladium and catalytic properties for methane combustion
566
Thermal characterization of titanium hydride in thermal oxidation process
567
Thermal characterization of Titanʹs tholins by simultaneous TG–MS, DTA, DSC analysis
568
Thermal characterization of tropical biomass feedstocks
569
Thermal characterization of turbulent flow in a channel with isosceles triangular ribs
570
Thermal characterization of Ugandaʹs Acacia hockii, Combretum molle, Eucalyptus grandis and Terminalia glaucescens for gasification
571
Thermal characterization, combustion and kinetics of different origin crude oils
572
Thermal characterization, melting behaviors, dynamic mechanical properties, and morphology in the polymorphism of syndiotactic polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)
573
Thermal charging of metal nanoparticles
574
Thermal chemical synthesis of nanostructured chromium carbide cermets
575
Thermal chemical synthesis of nanostructured chromium carbide cermets
576
Thermal chemical vapor deposition (T-CVD) growth of carbon nanotubes on different metallic underlayers
577
Thermal chemical vapor deposition grown graphene heat spreader for thermal management of hot spots Original Research Article
578
Thermal chemical vapor deposition of fluorocarbon polymer thin films in a hot filament reactor
579
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Investigation by multichannel Fourier-transform luminescence spectroscopy
580
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Kinetic analysis and bond dissociation energy of fluoroperoxide group
581
Thermal chemiluminescence spectroscopy of amino acids and its salts using a multichannel Fourier-transform spectrometer
582
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces I. Clean and hydrogen-covered
583
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces II. Effect of coadsorbed oxygen
584
Thermal chemistry of toluene and benzene on Si(1 0 0)2×1 and modified surfaces
585
Thermal chlorofluorination of propyne and propadiene
586
Thermal chlorofluorination of propyne and propadiene II
587
Thermal cis–trans conversion in thiophene oligomers
588
Thermal cis–trans isomerization of triazo-benzene
589
Thermal cis–trans isomerization of triazo-benzene
590
Thermal coating erosion in a simulated Martian landing environment
591
Thermal co-decomposition of silver acetylacetonate and tin(II) hexafluoroacetylacetonate: Formation of carbonaceous Ag/AgxSn(x = 4 and 6.7)/SnO2 composites
592
Thermal coefficient of InP-based quantum dot laser from cavity-mode measurements
593
Thermal collapse of SAPO-34 molecular sieve towards a perfect glass
594
Thermal collapse of snowflake fractals
595
Thermal combustion theory for a two-center unbranched chain reaction under the influence of light or ionizing radiation
596
Thermal comfort analysis of a low temperature waste energy recovery system: SIECHP
597
Thermal comfort and building design in the tropical climates
598
Thermal comfort and building energy consumption implications – A review
599
Thermal comfort and clothing insulation of resting tent occupants at high altitude
600
Thermal Comfort and Energy Analysis in Ceramic Tile
601
Thermal comfort and energy consumption in a UK educational building
602
Thermal comfort and energy consumption in modern versus traditional buildings in Cameroon: A questionnaire-based statistical study
603
Thermal comfort and energy consumption of the radiant ceiling panel system.: Comparison with the conventional all-air system
604
Thermal comfort and energy performance of a low-mixing ceiling-mounted personalized ventilator system
605
Thermal comfort and energy saving in a vehicle compartment using a localized air-conditioning system
606
Thermal comfort and energy saving of a personalized PFCU air-conditioning system
607
Thermal comfort and IAQ assessment of under-floor air distribution system integrated with personalized ventilation in hot and humid climate
608
Thermal comfort and IAQ characteristics of naturally/mechanically ventilated and air-conditioned bedrooms in a hot and humid climate
609
Thermal comfort and indoor air quality in the lecture room with 4-way cassette air-conditioner and mixing ventilation system
610
Thermal comfort and occupant responses during summer in a low to middle income housing development in South Australia
611
Thermal comfort and productivity - Evaluation of workplace environment in a task conditioned office
612
Thermal comfort and psychological adaptation as a guide for designing urban spaces
613
Thermal comfort and the integrated design of homes for older people with dementia
614
Thermal comfort and use of thermostats in Finnish homes and offices
615
Thermal comfort and workplace occupant satisfaction—Results of field studies in German low energy office buildings
616
Thermal comfort assessment and application of radiant cooling: A case study
617
Thermal Comfort Assessment and Heat-Related Illnesses among Sellers in Periodic Local Markets: A Case Study in Hot and Dry Climate of Iran
618
Thermal Comfort Assessment and Optimization of Environmental Factors by Using Taguchi Method
619
Thermal comfort assessment in civil aircraft cabins
620
Thermal comfort assessment in semi-outdoor environments: Application to comfort study in stadia
621
Thermal Comfort Assessment: A Case Study at Malaysian Automotive Industry
622
THERMAL COMFORT AT THE TURBINE ROOM IN THE POWER STATION: A REVIEW
623
Thermal comfort conditions of shaded outdoor spaces in hot and humid climate of Malaysia
624
Thermal comfort control on multi-room fan coil unit system using LEE-based fuzzy logic
625
Thermal comfort design of traditional houses in hot dry region of Algeria
626
Thermal comfort enhancement by using a ceiling fan
627
Thermal comfort evaluation in kindergarten: PMV and PPD measurement through datalogger and questionnaire
628
Thermal comfort evaluation of naturally ventilated public housing in Singapore
629
Thermal comfort evaluation with virtual manikin methods
630
Thermal Comfort Features of Antalya, Future Projections Using Climate Model Data and Its Effects on Tourism
631
Thermal comfort field study in undergraduate laboratories – An analysis of occupant perceptions
632
Thermal comfort for free-running buildings
633
Thermal comfort for naturally ventilated houses in Indonesia
634
Thermal comfort implications of urbanization in a warm-humid city: the Colombo Metropolitan Region (CMR), Sri Lanka
635
Thermal comfort in a room with exposed roof using evaporative cooling in Delhi
636
Thermal comfort in air-conditioned mosques in the dry desert climate
637
Thermal comfort in buildings with split air-conditioners in hot-humid area of China
638
Thermal comfort in chilled ceiling and displacement ventilation environments: vertical radiant temperature asymmetry effects
639
Thermal comfort in classrooms in the tropics
640
Thermal comfort in forested urban canyons of low building density. An assessment for the city of Mendoza, Argentina
641
Thermal comfort in hospitals – A literature review
642
Thermal comfort in Italian classrooms under free running conditions during mid seasons: Assessment through objective and subjective approaches
643
Thermal comfort in naturally ventilated apartments in summer: Findings from a field study in Hyderabad, India
644
Thermal comfort in naturally ventilated buildings in hot-humid area of China
645
Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55
646
Thermal Comfort in Naturally Ventilated Classroom: A Literature Review
647
Thermal comfort in office buildings: Two case studies commented
648
Thermal comfort in offices in summer: Findings from a field study under the ‘setsuden’ conditions in Tokyo, Japan
649
Thermal comfort in open plan offices in northern Italy: An adaptive approach
650
Thermal comfort in outdoor urban spaces in Singapore
651
Thermal comfort in outdoor urban spaces: Analysis across different European countries
652
Thermal comfort in passive solar earth integrated rooms
653
Thermal comfort in residential buildings – Failure to predict by Standard model
654
Thermal comfort in residential buildings: Comfort values and scales for building energy simulation
655
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
656
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
657
Thermal comfort in transitional spaces—basic concepts: literature review and trial measurement
658
Thermal comfort in undergraduate laboratories — A field study in Kharagpur, India
659
Thermal comfort in urban spaces: impact of vegetation growth: Case study: Piazza della Scienza, Milan, Italy
660
Thermal comfort in urban transitional spaces
661
Thermal Comfort Investigation in Traditional and Modern Urban Canyons in Bandar Abbas, Iran
662
Thermal comfort models: A review and numerical investigation
663
Thermal comfort of aeroplane seats: influence of different seat materials and the use of laboratory test methods
664
Thermal comfort of house and it’s influence on people’s quality of life
665
Thermal comfort of patients: Objective and subjective measurements in patient rooms of a Belgian healthcare facility
666
Thermal comfort prediction for a new passive cooling system
667
THERMAL COMFORT PROPERTIES OF COTTON KNITTED FABRICS IN DRY AND WET STATES
668
Thermal comfort standards for air conditioned buildings in hot and humid Thailand considering additional factors of acclimatization and education level
669
Thermal comfort standards, measured internal temperatures and thermal resilience to climate change of free-running buildings: A case-study of hospital wards
670
Thermal Comfort Study Based on PMV-PPD in the Building of a Screening Center for COVID-19
671
Thermal comfort study of an air-conditioned lecture theatre in the tropics
672
Thermal comfort temperature range for factory workers in warm humid tropical climates
673
Thermal comfort temperatures world-wide - the current position
674
Thermal comfort, skin temperature distribution, and sensible heat loss distribution in the sitting posture in various asymmetric radiant fields
675
Thermal comfort: A review paper
676
Thermal comfort: use of controls in naturally ventilated buildings
677
Thermal Comfort-Based Heat Pumps Utilization for Wind Power Uncertainty Management
678
Thermal compact modeling of parallel plate heat sinks
679
Thermal compact models: an alternative approach
680
Thermal Compatibility and Bond Strength of FRP Reinforcement in Prestressed Concrete Applications
681
Thermal Compatibility and Durability of Wearing Surfaces on GFRP Bridge Decks
682
Thermal compatibility of centrifugally atomized U–Mo powders with aluminium in a dispersion fuel Original Research Article
683
Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries
684
Thermal compatibility of dry sliding tribo-specimens
685
Thermal component of stimulated brillouin scattering due to two-photon absorption
686
Thermal components in the early X-ray afterglow of GRBs
687
Thermal composting of faecal matter as treatment and possible disinfection method––laboratory-scale and pilot-scale studies
688
Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds
689
Thermal Condensation of 1-Aryl/ hetaryl-3-methyl-2- pyrazolin-5-ones with Aromatic Aldehydes. synthesis of 4- arylidenepyrazolones
690
Thermal condensation of trinuclear lanthanide butoxides. Molecular structure of La5(μ5-O)(μ3-OtBu)4(μ-OtBu)4(OtBu)5
691
Thermal conditioning for urban outdoor spaces through the use of evaporative wind towers
692
Thermal Conduct ivity and Thermal Diffusivity of Biodiesel and Bioethanol Samples
693
Thermal conductance at millikelvin temperatures of woven ribbon cable with phosphor-bronze clad superconducting wires Original Research Article
694
Thermal conductance in a quantum waveguide modulated with quantum dots
695
Thermal conductance in quantum wire with two obstacles
696
Thermal conductance measurement of windows: An innovative radiative method
697
Thermal conductance measurement on vacuum glazing
698
Thermal conductance measurements of bolted copper to copper joints at sub-Kelvin temperatures Original Research Article
699
Thermal conductance of randomly oriented composites of thin layers
700
Thermal conductance of the interfaces between the III-nitride materials and their substrates: Effects of intrinsic material properties and interface conditions
701
Thermal conductance through discrete quantum channels
702
Thermal conduction analysis and characterization of solder bumps in flip chip package
703
Thermal conduction analysis of layered functionally graded materials
704
Thermal conduction and thermal diffusion in dilute polyatomic gas mixtures
705
Thermal conduction between a heated microcantilever and a surrounding air environment
706
Thermal conduction in a 2-D FCT plasma hydrodynamic code Original Research Article
707
Thermal conduction in classical low-dimensional lattices
708
Thermal conduction in classical low-dimensional lattices
709
Thermal conduction induced by electron-beam
710
Thermal conduction measurement of miniature coaxial cables between 0.3 and 4.5 K for the wiring of superconducting detectors Original Research Article
711
Thermal conduction model of metal and ceramics
712
Thermal conduction of a circular inclusion with variable interface parameter
713
Thermal conductive heating in fractured bedrock: Screening calculations to assess the effect of groundwater influx
714
Thermal conductive properties of Ni–P electroless plated SiCp/Al composite electronic packaging material
715
Thermal Conductivities of [bmim][PF6], [hmim][PF6], and [omim][PF6] from 294 to 335 K at Pressures up to 20 MPa
716
Thermal conductivities of actinides (U, Pu, Np, Cm, Am) and uranium-alloys (U–Zr, U–Pu–Zr and U–Pu–TRU–Zr)
717
Thermal conductivities of americium dioxide and sesquioxide by molecular dynamics simulations
718
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
719
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
720
Thermal conductivities of hypostoichiometric (U, Pu, Am)O2−x oxide
721
Thermal conductivities of irradiated UO2 and (U, Gd)O2 pellets
722
Thermal conductivities of irradiated UO2 and (U,Gd)O2
723
Thermal conductivities of iso-volume centre-symmetric honeycombs
724
Thermal conductivities of solid and liquid phases for neopentylglycol, aminomethylpropanediol and their binary alloy Original Research Article
725
Thermal conductivities of solid and liquid phases for pure Al, pure Sn and their binary alloys
726
Thermal conductivities of solid and liquid phases in Pb–Cd and Sn–Zn binary eutectic alloys
727
Thermal conductivities of ThO2, NpO2 and their related oxides: Molecular dynamics study
728
Thermal conductivities of three-dimensionally woven fabric composites
729
Thermal conductivities of YSZ/Al2O3 composites
730
Thermal conductivities of yttria-stabilized zirconia films measured by a laser-heating AC method
731
Thermal conductivities study of new types of compound adsorbents used in solar adsorption refrigeration
732
Thermal conductivities study on silica aerogel and its composite insulation materials
733
Thermal conductivity analysis of a briquette with additive hazelnut shells
734
Thermal conductivity and acid dissolution behavior of MgO–ZrO2 ceramics for use in LWR inert matrix fuel
735
THERMAL CONDUCTIVITY AND ACOUSTIC PROPERTIES OF NATURAL FIBER MIXED POLYURETHANE COMPOSITES
736
Thermal Conductivity and Anisotropy of Intermolecular Potential Energy in Refrigerant Fluids R125, R134a, R12, R14 and R141b
737
Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures
738
Thermal conductivity and compressive strength of expanded perlite aggregate concrete with mineral admixtures
739
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
740
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
741
Thermal conductivity and cycle characteristic of metal hydride sheet formed using aramid pulp and carbon fiber
742
Thermal conductivity and density of clay pastes at various water contents for pelotherapy use
743
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
744
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
745
Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites
746
Thermal conductivity and fire resistance of epoxy molding compounds filled with Si3N4 and Al(OH)3
747
Thermal conductivity and interfacial energies of solid Sn in the Sn–Cu alloy
748
Thermal conductivity and interfacial energies of solid Sn solution in the Sn–Ag–In ternary alloy
749
Thermal conductivity and interfacial energies of solid Sn3Sb2 in the Sn–Sb peritectic system
750
Thermal conductivity and interfacial energy of solid Bi solution in the Bi–Al–Zn eutectic system
751
Thermal conductivity and Kapitza resistance of epoxy resin fiberglass tape at superfluid helium temperature Original Research Article
752
Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material
753
Thermal conductivity and latent heat thermal energy storage properties of LDPE/wax as a shape-stabilized composite phase change material
754
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
755
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
756
Thermal conductivity and Lorenz number of the Ce1−xLaxNiAl4 Kondo alloys
757
Thermal conductivity and magnetic properties of the B substituted Ca3Co4O9
758
Thermal conductivity and microstructure of Ti-doped graphite Original Research Article
759
Thermal conductivity and permeability of consolidated expanded natural graphite treated with sulphuric acid Original Research Article
760
Thermal conductivity and phase stability of plasma sprayed ZrO2–Y2O3–La2O3 coatings
761
Thermal conductivity and phase-change properties of aqueous alumina nanofluid
762
THERMAL CONDUCTIVITY AND RESISTANCE OF NOMEX FABRICS EXPOSED TO SALTY WATER
763
Thermal conductivity and rheological properties of graphite/oil nanofluids
764
Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes
765
Thermal conductivity and specific heat of bulk amorphous chalcogenides Ge20Te80−xSex (x = 0,1,2,8)
766
Thermal conductivity and specific heat of kaolinite: Evolution with thermal treatment
767
Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites Original Research Article
768
Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell
769
Thermal conductivity and tensile response of defective graphene: A molecular dynamics study Original Research Article
770
Thermal conductivity and the isotope effect in Li2O
771
Thermal conductivity and thermal contact conductance studies on Al2O3/Al–AlN metal matrix composite
772
Thermal conductivity and thermal cycle life of La2O3 and HfO2 doped ZrO2–Y2O3 coatings produced by EB-PVD
773
Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres
774
Thermal conductivity and thermal diffusivity of cores from a 26 meter deep borehole drilled in Livingston Island, Maritime Antarctic
775
Thermal Conductivity and Thermal Diffusivity of Pulse-Heated W–Re Alloys
776
Thermal conductivity and thermal expansion coefficient of diamond/5 wt%Si–Cu composite by vacuum hot pressing
777
Thermal conductivity and thermal expansion of Ir3X (X = Ti, Zr, Hf, V, Nb, Ta) compounds for high-temperature applications
778
Thermal conductivity and thermodynamics of majoritic garnets: implications for the transition zone
779
Thermal conductivity and thermo-power of ( and ) bulk superconductors
780
Thermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
781
Thermal Conductivity and Viscosity of Aqueous K2SO4 Solutions at Temperatures from 298 to 575 K and at Pressures up to 30 MPa
782
Thermal conductivity and viscosity of water-in-oil nanoemulsions
783
Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO2 dissolution
784
Thermal conductivity as an indicator of fat content in milk
785
Thermal conductivity bounds for isotropic, porous materials
786
Thermal conductivity calculation of magnetite using molecular dynamics simulation
787
Thermal Conductivity Characterization of Bamboo Fiber Reinforced Polyester Composite
788
Thermal conductivity correlations for minor constituent fluids in natural gas: n-octane, n-nonane and n-decane
789
Thermal conductivity decomposition and analysis using molecular dynamics simulations. Part I. Lennard-Jones argon
790
Thermal conductivity decomposition and analysis using molecular dynamics simulations: Part II. Complex silica structures
791
Thermal conductivity degradation of ceramic materials due to low temperature, low dose neutron irradiation
792
Thermal conductivity determinations of thermal barrier coatings
793
Thermal conductivity determinations of thermal barrier coatings
794
Thermal conductivity due to magnons in high-quality single crystals of the two-leg spin-ladder system (Ca,Sr,La)14Cu24O41
795
Thermal conductivity effects on steady state propagation speed during self-propagating high-temperature synthesis of Ti + C green compacts
796
Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids
797
Thermal conductivity enhancement in a latent heat storage system
798
Thermal Conductivity Enhancement in Aqueous Suspensions of Carbon Multi-Walled and Double-Walled Nanotubes in the Presence of Two Different Dispersants
799
Thermal conductivity enhancement of Al2O3 nanofluids based on the mixtures of aqueous NaCl solution and CH3OH
800
Thermal conductivity enhancement of binary nanoemulsion (O/S) for absorption application
801
Thermal conductivity enhancement of BN/silicone composites cured under electric field: Stacking of shape, thermal conductivity, and particle packing structure anisotropies
802
Thermal conductivity enhancement of carbon fiber composites
803
Thermal conductivity enhancement of energy storage media using carbon fibers
804
Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
805
Thermal conductivity enhancement of nanofluids in conjunction with electrical double layer (EDL)
806
Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: A review
807
Thermal conductivity enhancement of paraffins by increasing the alignment of molecules through adding CNT/graphene
808
Thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ Cu doping
809
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
810
Thermal conductivity enhancement of phase change materials using a graphite matrix
811
Thermal conductivity enhancement of ZnO nanofluid using a one-step physical method
812
Thermal conductivity enhancement with different fillers for epoxy resin adhesives
813
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: I. Modeling techniques
814
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: II. Application to two fluids
815
Thermal conductivity estimation in non-linear problems
816
Thermal conductivity evaluation of GaN–AlN–(4H)SiC hetero-epitaxial material system
817
Thermal conductivity evaluation of high burnup mixed-oxide (MOX) fuel pellet
818
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
819
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
820
Thermal conductivity for single-walled carbon nanotubes from Einstein relation in molecular dynamics Original Research Article
821
Thermal conductivity from dynamic response of DSC
822
Thermal conductivity improvement of phase change materials/graphite foam composites Original Research Article
823
Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications
824
Thermal conductivity in dynamics of first-order phase transitions
825
Thermal conductivity in mullite/ZrO2 composite coatings
826
Thermal conductivity in relation to porosity and hardness of terrestrial porous media
827
Thermal conductivity in vortex state of nodal superconductors
828
Thermal conductivity investigation for upsetting with a procedure of combining inverse model and the proposed regularization of Tikhonov method
829
Thermal conductivity investigation of zirconia co-doped with yttria and niobia EB-PVD TBCs
830
Thermal conductivity mapping of pyrolytic carbon and silicon carbide coatings on simulated fuel particles by time-domain thermoreflectance
831
Thermal conductivity measurement and characterization of binary nanofluids
832
Thermal conductivity measurement and sedimentation detection of aluminum oxide nanofluids by using the 3ω method
833
Thermal conductivity measurement below 40 K of the CFRP tubes for the Mid-Infrared Instrument mounting struts
834
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
835
Thermal conductivity measurement of anisotropic material using photothermal deflection method
836
Thermal conductivity measurement of geothermal cementing systems: an experimental comparison between the line source and Jaeger methods
837
Thermal conductivity measurement of HTS tapes and stacks for current lead applications
838
Thermal conductivity measurement of insulating materials with a three layers device
839
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
840
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
841
Thermal conductivity measurement of methanol-based nanofluids with Al2O3 and SiO2 nanoparticles
842
Thermal conductivity measurement of oil in Water (O/W) nanoemulsion and oil in H2O/LiBr (O/S) binary nanoemulsion for absorption application
843
Thermal Conductivity Measurement of Semitransparent Solids by Hot-Wire Technique1
844
Thermal Conductivity Measurement of Submicron-Thick Films Deposited on Substrates by Modified ac Calorimetry (Laser-Heating Ångstrom Method)
845
Thermal Conductivity Measurement of Thermally-Oxidized SiO2 Films on a Silicon Wafer Using a Thermo-Reflectance Technique
846
Thermal conductivity measurements of a traditional fermented dough in the frozen state Original Research Article
847
Thermal conductivity measurements of alumina powders and molded Min-K in vacuum
848
Thermal Conductivity Measurements of Aqueous SrCl2 and Sr(NO3)2 Solutions in the Temperature Range Between 293 and 473 K at Pressures up to 100 MPa
849
Thermal conductivity measurements of copper-coated metal hydrides (LaNi5, Ca0.6Mm0.4Ni5, and LaNi4.75Al0.25) for use in metal hydride hydrogen compression systems
850
Thermal Conductivity Measurements of Liquid Mercury and Gallium by a Transient Hot-Wire Method in a Static Magnetic Field
851
Thermal conductivity measurements of pitch-bonded graphites at millikelvin temperatures: Finding a replacement for AGOT graphite Original Research Article
852
Thermal conductivity measurements of porous dust aggregates: I. Technique, model and first results
853
Thermal Conductivity Measurements of Thin Amorphous Silicon Films by Scanning Thermal Microscopy
854
Thermal Conductivity Measurements of Thin Insulating Layers Deposited on High-Conducting Sheets
855
Thermal Conductivity Modeling of Pure Refrigerants in a Three-Parameter Corresponding States Format
856
Thermal Conductivity Modeling of Refrigerant Mixtures in a Three-Parameter Corresponding States Format
857
Thermal conductivity modelling of terrestrial soil media—A comparative study
858
Thermal Conductivity Models for Polymer Stabilized Hybrid Nanofluids Prepared by One-Step Method
859
Thermal conductivity of (Hf1−xZrx)6Ta2O17 (x = 0, 0.1, 0.3 and 0.5) ceramics
860
Thermal conductivity of (Sm1–xLax)2Zr2O7 (x=0, 0.25, 0.5, 0.75 and 1) oxides for advanced thermal barrier coatings
861
Thermal conductivity of (U,Ce)O2 with and without Nd or Zr
862
Thermal conductivity of (U,Pu,Np)O2 solid solutions
863
Thermal Conductivity of 1,1-Difluoroethane (HFC-152a)
864
Thermal conductivity of 2D C–C composites with pyrolytic and glass-like carbon matrices
865
Thermal conductivity of a beryllium gas packed bed
866
Thermal conductivity of a clay-based aerogel
867
Thermal conductivity of a CuCrZr alloy from 5 K to room temperatures Original Research Article
868
Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite Original Research Article
869
Thermal conductivity of a metal-organic framework (MOF-5): Part II. Measurement
870
Thermal conductivity of a single carbon nanocoil measured by field-emission induced thermal radiation Original Research Article
871
Thermal conductivity of a volcanic rock material (olivine-melilitite) in the temperature range between 288 and 1470 K
872
Thermal conductivity of Al2O3/SiC platelet composites
873
Thermal Conductivity of AlN and SiC Thin Films
874
Thermal conductivity of AlN ceramics sintered with CaF2 and YF3
875
Thermal conductivity of AlN/polystyrene interpenetrating networks
876
Thermal Conductivity of Aloji Fireclay as Refractory Material
877
Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution
878
Thermal conductivity of alumina inclusion/glass matrix composite materials: local and macroscopic scales
879
Thermal conductivity of ammonia borane complex and its composites with aluminum powder
880
Thermal conductivity of ammonia + lithium nitrate and ammonia + lithium nitrate + water solutions over a wide range of concentrations and temperatures
881
Thermal conductivity of ammonia + water mixtures over a wide range of concentrations
882
Thermal conductivity of AmO2−x
883
Thermal conductivity of amorphous silicon thin films
884
Thermal conductivity of amorphous Teflon (AF 1600) at high pressure
885
Thermal conductivity of an aligned carbon nanotube array Original Research Article
886
Thermal conductivity of anodized aluminum oxide layer: The effect of electrolyte and temperature
887
Thermal conductivity of aqueous BaI2 solutions in the temperature range 293–473 K and the pressure range 0.1–100 MPa
888
Thermal Conductivity of Aqueous Potassium Chloride Solutions
889
Thermal Conductivity of Aqueous Sugar Solutions under High Pressure
890
Thermal conductivity of archaeological ceramics: The effect of inclusions, porosity and firing temperature
891
Thermal conductivity of A-site doped pyrochlore oxides studied by molecular-dynamics simulation
892
Thermal conductivity of BaPuO3 at temperatures from 300 to 1500 K
893
Thermal conductivity of BaWO4 single crystal
894
Thermal Conductivity of Binary Refrigerant Mixtures of HFC-32/125 and HFC-32/134a in the Liquid Phase
895
Thermal conductivity of boron nitride reinforced polyethylene composites
896
Thermal Conductivity of Carbon Aerogels as a Function of Pyrolysis Temperature
897
Thermal Conductivity of Carbon Dioxide–Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures up to 12 MPa
898
Thermal conductivity of carbon nanofiber mats Original Research Article
899
Thermal conductivity of carbon nanotube reinforced aluminum composites: A multi-scale study using object oriented finite element method
900
Thermal conductivity of carbon-containing refractories
901
Thermal conductivity of carbon-phenolic 8-harness satin weave composites
902
Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling
903
Thermal conductivity of CeNiAl4 Kondo lattice
904
Thermal conductivity of ceramic particle filled polymer composites and theoretical predictions
905
Thermal conductivity of ceramics during irradiation
906
Thermal Conductivity of Chalcogenide As2S3 Thin Films
907
Thermal Conductivity of Clay Bricks
908
Thermal conductivity of coal ash and slags and models used
909
Thermal conductivity of coconut fibre filled ferrocement sandwich panels
910
Thermal conductivity of combustion synthesized β-sialons
911
Thermal conductivity of composite sorbents “salt in porous matrix” for heat storage and transformation
912
Thermal conductivity of composites made of wastes of wood and expanded polystyrene
913
Thermal conductivity of compressed beryllium pebble beds
914
Thermal conductivity of compressed ceramic breeder pebble beds
915
Thermal Conductivity of Cu 2 O-TiO 2 Composite -Nanofluid Based on Maxwell model
916
Thermal Conductivity of Cu and Al-Water Nanofluids
917
Thermal conductivity of diatomic liquid in a narrow channel including a nanobubble
918
Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady-state laser heat flux technique
919
Thermal conductivity of electron-doped CaMnO3 perovskites: Local lattice distortions and optical phonon thermal excitation Original Research Article
920
Thermal conductivity of ethyl fluoride (HFC161)
921
Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid
922
Thermal conductivity of ethylene vinyl acetate copolymer/nanofiller blends
923
Thermal conductivity of exfoliated graphite nanoplatelet paper Original Research Article
924
Thermal Conductivity of Feed Pellets
925
Thermal conductivity of fibrous glass board by guarded hot plates and heat flow meters: An iInternational round-robin
926
Thermal conductivity of fired clays: Effects of mineralogical and physical properties of the raw materials
927
Thermal conductivity of fluorinated graphene: A non-equilibrium molecular dynamics study
928
Thermal conductivity of fused quartz and quartz ceramic at high temperatures and high pressures Original Research Article
929
Thermal conductivity of GaN crystals in 4.2–300 K range
930
Thermal conductivity of granular materials relevant to the thermal evolution of cometary nuclei
931
Thermal conductivity of graphite filled liquid crystal polymer composites and theoretical predictions
932
Thermal conductivity of graphite/silicone rubber prepared by solution intercalation
933
Thermal conductivity of hemp concretes: Variation with formulation, density and water content
934
Thermal conductivity of heterogeneous LWR MOX fuels
935
Thermal Conductivity of HFC-32, HFC-125, and HFC-134a in the Solid Phase
936
Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method
937
Thermal conductivity of highly crystallized polyethylene
938
Thermal conductivity of highly loaded aluminium nitride–poly(propylene glycol) dispersions
939
Thermal conductivity of highly porous mullite material
940
Thermal conductivity of highly porous mullite material Original Research Article
941
Thermal conductivity of highly porous mullite materials
942
Thermal conductivity of highly porous zirconia
943
Thermal conductivity of high-temperature Si–B–C–N thin films
944
Thermal conductivity of homogeneous and heterogeneous MOX fuel with up to 44 MWd/kgHM burn-up
945
Thermal conductivity of hydrogenated amorphous silicon
946
Thermal conductivity of InAs quantum dot stacks using AlAs strain compensating layers on InP substrate
947
Thermal conductivity of individual carbon nanofibers Original Research Article
948
Thermal conductivity of isotopically enriched 28Si: revisited
949
Thermal conductivity of isotopically enriched silicon
950
Thermal conductivity of Kevlar 49 between 7 and 290 K
951
Thermal conductivity of La0.67(CaxSr1−x)0.33MnO3 (x=0, 0.5, 1) and La0.6Y0.07Ca0.33MnO3 pellets between 10 and 300 K
952
Thermal conductivity of leaf compost used in biofilters: An experimental and theoretical investigation
953
Thermal conductivity of limestone from Gaziantep (Turkey)
954
Thermal conductivity of liquid 1,1,1,3,3,3-hexafluoropropane (HFC-236fa) from 253 K to 373 K and pressure up to 30 MPa
955
Thermal conductivity of liquid octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from molecular dynamics simulations
956
Thermal conductivity of liquid phase sintered silicon carbide
957
Thermal Conductivity of Liquid Tin and Indium
958
Thermal conductivity of lower-mantle minerals
959
Thermal conductivity of low-temperature sintered calcium aluminosilicate glass–silicon nitride whisker composites
960
Thermal conductivity of magnetically aligned carbon nanotube buckypapers and nanocomposites
961
Thermal conductivity of ME771 glass–epoxy laminate from millikelvin temperatures to 4 K
962
Thermal conductivity of metal-organic framework 5 (MOF-5): Part I. Molecular dynamics simulations
963
Thermal conductivity of methane hydrate-bearing Ulleung Basin marine sediments: Laboratory testing and numerical evaluation
964
Thermal conductivity of MgO periclase at high pressure: Implications for the D″ region
965
Thermal conductivity of MgO, MgSiO3 perovskite and post-perovskite in the Earthʹs deep mantle
966
Thermal conductivity of micro-and nanostructural epoxy composites at low temperatures
967
Thermal Conductivity of Mineral Wool Materials Partially Saturated by Water
968
Thermal conductivity of mixed alkali silicate glasses at low temperature
969
Thermal Conductivity of Molten Lead-Free Solders
970
Thermal conductivity of multicomponent polyatomic dilute gas mixtures
971
Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization Original Research Article
972
Thermal conductivity of nanocomposites with high volume fractions of particles
973
Thermal conductivity of nanocrystalline carbon films studied by pulsed photothermal reflectance
974
Thermal Conductivity of Nanofluids – Experimental and Theoretical
975
Thermal conductivity of nanofluids containing high aspect ratio fillers
976
Thermal conductivity of nanoporous ZrO2–4 mol% Y2O3 multilayer coatings fabricated by EB-PVD
977
Thermal conductivity of near-stoichiometric (U, Er)O2 solid solutions
978
Thermal conductivity of negative-thermal-expansion oxide, Zr1−xYxW2O8 (x=0.00, 0.01)—temperature dependence and effect of structural phase transition
979
Thermal conductivity of neptunium dioxide
980
Thermal conductivity of neutron irradiated Be12Ti
981
Thermal conductivity of Newtonian and non-Newtonian liquids
982
Thermal conductivity of Ni3Al with ternary additions
983
Thermal conductivity of Ni3Al with ternary additions
984
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
985
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
986
Thermal conductivity of Ni-Al powder compacts for reaction synthesis
987
Thermal Conductivity of Nitrogen-Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures Up to 16 MPa
988
Thermal conductivity of non-Newtonian nanofluids: Experimental data and modeling using neural network
989
Thermal conductivity of non-stoichiometric americium oxide: A molecular dynamics study
990
Thermal Conductivity of Normal Liquid 3He in Aerogel
991
Thermal Conductivity of Opacified Powder Filler Materials for Vacuum Insulations1
992
Thermal conductivity of organic superconductors in oriented magnetic field
993
Thermal conductivity of organoplastics
994
Thermal conductivity of packed beds consisting of porous particles wetted with binary mixtures
995
Thermal conductivity of particle filled polyethylene composite materials
996
Thermal conductivity of particle filled polyethylene composite materials
997
Thermal conductivity of periodic array of intermolecular junctions of silicon nanowires
998
Thermal conductivity of plasma sprayed Sm2Zr2O7 coatings
999
Thermal conductivity of plasma-sprayed W/SiC composite for high-temperature energy applications
1000
Thermal conductivity of polycrystalline and amorphous Se–Te–Cu system Original Research Article
