ليست عنوان مقالات لاتين Mechanical property evaluation of PZT/Al2O3 composites prepared by a simple solid-state mixed oxide method Mechanism for the anomalous degradation of proton- or electron-irradiated silicon solar cells

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Mechanical property evaluation of PZT/Al2O3 composites prepared by a simple solid-state mixed oxide method

2

Mechanical property extraction through conical indentation of a closed-cell aluminum foam Original Research Article

3

Mechanical Property Measurement at the Micro/Nano-scale1

4

Mechanical property measurement of titanium/titanium nitride and aluminium–magnesium/magnesium freestanding multilayer foils

5

Mechanical property measurements of heterogeneous materials by selective nanoindentation: Application to LiMn2O4 cathode

6

Mechanical property measurements of nanoscale structures using an atomic force microscope

7

Mechanical property measurements of nanoscale structures using an atomic force microscope

8

Mechanical property measurements of nanoscale structures using an atomic force microscope

9

Mechanical property of beam-to-column moment connection with hysteretic dampers for column weak axis

10

Mechanical property of Fe-base metallic glass coating formed by gas tunnel type plasma spraying

11

Mechanical property of high density nanocrystalline gold prepared by gas deposition method

12

Mechanical property of induction brazing TiAl-based intermetallics to steel 35CrMo using AgCuTi filler metal

13

Mechanical property of lattice truss material in sandwich panel including strut flexural deformation

14

Mechanical property of the low dielectric carbon doped silicon oxide thin film grown from MTMS/O2 source

15

Mechanical Property Prediction of Strip Model Based on PSO-BP Neural Network Original Research Article

16

Mechanical property variations within thermal barrier coatings

17

Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg–Li–(Al)–(RE) alloys for future cardiovascular stent application

18

Mechanical prosthetic aortic valve dehiscence presenting as sudden cardiac death due to extrinsic compression of the left main coronary artery

19

Mechanical Prosthetic Valves and Pregnancy

20

Mechanical protection of cardiac microcirculation during percutaneous coronary intervention of saphenous vein grafts

21

Mechanical pumping of portal blood to the liver: hemodynamic effects of a new experimental treatment for portal hypertension

22

Mechanical quadrature methods and their extrapolation for solving first kind Abel integral equations

23

Mechanical quadrature methods and their extrapolations for solving boundary integral equations of the conductivity problem with discontinuous media

24

Mechanical quadrature methods and their splitting extrapolations for boundary integral equations of first kind on open arcs

25

Mechanical quadrature methods and their splitting extrapolations for solving boundary integral equations of axisymmetric Laplace mixed boundary value problems

26

Mechanical quality of bedrock with increasing ductile deformation

27

Mechanical realization of a multichannel Martin-Puplett interferometer for perpendicular and oblique ECE measurements on JET

28

Mechanical reasoning about families of UTP theories

29

Mechanical reasoning by mental simulation

30

MECHANICAL REASONS FOR PLASTICITY-INDUCED CRACK CLOSURE UNDER PLANE STRAIN CONDITIONS

31

Mechanical recanalization of total coronary occlusions with the use of a new guide wire, ,

32

Mechanical recycling of GFRP waste as short-fiber reinforcements in microconcrete

33

Mechanical redesign of the rotating biological contactor

34

Mechanical Refrigeration and the Integration of Perishable Commodity Markets

35

Mechanical Regulation of Cartilage Biosynthetic Behavior: Physical Stimuli

36

Mechanical regulation of PTHrP expression in entheses

37

Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites

38

Mechanical reinforcement in model elastomer nanocomposites with tuned microstructure and interactions

39

Mechanical reinforcement in natural rubber/organoclay nanocomposites

40

Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes Original Research Article

41

Mechanical reinforcement of chitosan using unzipped multiwalled carbon nanotube oxides

42

Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers

43

Mechanical relation for porous metal foams under complex loads of triaxial tension and compression

44

Mechanical relation of foamed metals under uniaxial and biaxial loads of collective tension and compression

45

Mechanical relations for porous metal foams under several typical loads of shearing, torsion and bending

46

Mechanical relaxation in a ternary silver borate below the glass transition temperature and corresponding features of the electrical response

47

Mechanical relaxation in glasses

48

Mechanical relaxation in glasses

49

Mechanical relaxation in simple molecular liquids from the liquid to the supercooled state

50

Mechanical relaxation in simple molecular liquids from the liquid to the supercooled state

51

Mechanical relaxation in thermoelectric oxide Ca3−xSrxCo4O9+δ (x=0, 0.25, 0.5, 1.0) associated with oxygen vacancies

52

Mechanical relaxation near glass transition studied by various methods

53

Mechanical relaxation of localized residual stresses associated with foreign object damage

54

Mechanical relaxation times as indicators of stickiness in skim milk–maltodextrin solids systems Original Research Article

55

Mechanical relaxations in single and mixed alkali silicate glasses

56

Mechanical reliability and durability of SOFC stacks. Part I : Modelling of the effect of operating conditions and design alternatives on the reliability

57

Mechanical reliability and durability of SOFC stacks. Part II: Modelling of mechanical failures during ageing and cycling

58

Mechanical reliability characterization of low carbon steel brazed joints with copper filler metal

59

Mechanical reliability evaluation of silicon nitride ceramic components after exposure in industrial gas turbines

60

Mechanical Reliability of the Jarvik 2000 Heart

61

Mechanical reliability of transparent conducting IZTO film electrodes for flexible panel displays

62

Mechanical Removal of Sulphuretted Apricot Pit

63

Mechanical reperfusion: treat well, treat on time too

64

Mechanical Rescue of the Heart in Shock

65

Mechanical resilience of skin: A function for blood supply and lymphatic drainage

66

Mechanical Resistance of Steel Fiber Reinforced Concrete to Axial Load

67

Mechanical resistance of wheat straw after incubation in cultures of ruminal cellulolytic microorganisms

68

Mechanical resistance properties of FRP/polyol–isocyanate foam sandwich panels

69

Mechanical response and effects of β-to-α" phase transformation on the strengthening of Ti–10 V–2 Fe–3 Al during one-dimensional shock loading

70

Mechanical response and fatigue analysis of the first wall structure of the PROMETHEUS IFE reactor

71

Mechanical response and modeling of fully compacted nanocrystalline iron and copper

72

Mechanical response and multilevel structure of biomimetic hydroxyapatite/polygalacturonic/chitosan nanocomposites

73

Mechanical response and shrinkage performance of cementitious composites with a new fiber hybridization

74

Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures

75

Mechanical response of 2024-7075 aluminium alloys joined by Friction Stir Welding

76

Mechanical response of 9% Cr heat-resistant martensitic steels to abrupt stress loading at high temperature

77

Mechanical response of a capacitive microsensor under thermal load

78

Mechanical response of a medium-fine-grained decomposed granite in Hong Kong

79

Mechanical Response of a Piezoelectrically Sandwiched Nano-beam Based on the Nonlocal Theory

80

Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling

81

Mechanical response of a simple molecular glass former in the glass transition region

82

Mechanical response of a tensegrity structure close to its integrity limit submitted to external constraints

83

Mechanical response of a unidirectional graphite fiber/polyimide composite as a function of temperature

84

Mechanical response of a woven graphite/polyimide composite to in-plane shear dominated loads at room and elevated temperatures Original Research Article

85

Mechanical response of amorphous and semicrystalline poly(ethylene terephthalate) and modelling in frame of quasi point defect theory

86

Mechanical response of amorphous ZrCuTi/PdCuSi nanolaminates under nanoindentation

87

Mechanical response of an oxide glass to mechanical loading—shear and volume relaxation effects: physical analysis Original Research Article

88

Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature

89

Mechanical response of barium-titanate/polymer 0–3 ferroelectric nano-composite film under uniaxial tension

90

Mechanical response of brain tissue under blast loading

91

Mechanical response of cracked laminated plates Original Research Article

92

Mechanical response of dibenzyl-based polyurethanes with diol chain extension

93

Mechanical response of discontinuous ceramic fiber reinforced metal matrix composites under quasi-static and dynamic loadings

94

Mechanical response of electrically conductive laminated composite plates in the presence of an electromagnetic field

95

Mechanical response of fiber-reinforced incompressible non-linearly elastic solids

96

Mechanical response of friction stir welded AA2024: experiment and modeling

97

Mechanical response of friction stir welded AA2024: experiment and modeling

98

Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle

99

Mechanical response of hard bio-based PU foams under cyclic quasi-static compressive loading conditions

100

Mechanical response of hydrogen-filled single-walled carbon nanotubes under torsion

101

Mechanical Response of Lined and Unlined Heated Drifts

102

Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading

103

Mechanical response of multicrystalline thin films in mesoscale field dislocation mechanics

104

Mechanical response of nanocrystalline steel obtained by mechanical attrition

105

Mechanical response of nanoporous gold Original Research Article

106

Mechanical response of neo-Hookean fiber reinforced incompressible nonlinearly elastic solids

107

Mechanical response of novel SiOC glasses to high temperature exposition

108

Mechanical response of oxide dispersion strengthened (ODS) EUROFER97 after neutron irradiation at 300 °C

109

Mechanical response of oxidized Zircaloy-4 cladding material submitted to a ring compression test

110

Mechanical response of pig skin under dynamic tensile loading

111

Mechanical response of polypropylene under multiple-step loading

112

Mechanical response of sediments to bubble growth

113

Mechanical response of tendon subsequent to ramp loading to varying strain limits

114

Mechanical response of the ITER toroidal field magnet system during fault conditions

115

Mechanical response of wall-patterned GaAs surface

116

Mechanical response of wall-patterned GaAs surface Original Research Article

117

Mechanical response of wooden boards subjected to humidity step variations: climatic chamber measurements and fitted mathematical models

118

Mechanical response of zirconium—I. Derivation of a polycrystal constitutive law and finite element analysis Original Research Article

119

Mechanical response of zirconium—II. Experimental and finite element analysis of bent beams Original Research Article

120

Mechanical response of Zr-based metallic glass

121

Mechanical responses evoked by nerve stimulation in gastric muscles of mouse lacking inositol trisphosphate receptor

122

Mechanical responses of a compliant electrospun poly(l-lactide-co-ε-caprolactone) small-diameter vascular graft

123

Mechanical responses of a polymer graphene-sheet nano-sandwich

124

Mechanical responses of Mg-based bulk metallic glasses

125

Mechanical responses of Zn1−xMnxO epitaxial thin films

126

Mechanical restrictions on biological responses by adherent cells within collagen gels

127

Mechanical resuspension of autochthonous calcite (Seekreide) failed to control internal phosphorus cycle in a eutrophic lake

128

Mechanical Right Ventricular Dyssynchrony in Patients After Atrial Switch Operation for Transposition of the Great Arteries

129

Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer

130

Mechanical self-stabilization, a working hypothesis for the study of the evolution of body proportions in terrestrial mammals?

131

Mechanical Sensitivity Enhancement of an Area-Changed Capacitive Accelerometer by Optimization of the Device Geometry

132

Mechanical Sensorless Control of PMSM With Online Estimation of Stator Resistance

133

Mechanical Sensorless Drives of IPMSM With Online Parameter Identification

134

Mechanical servo press technology for metal forming

135

Mechanical signals modulated vascular endothelial growth factor-A (VEGF-A) alternative splicing in osteoblastic cells through actin polymerisation

136

Mechanical simulation of a Proton Exchange Membrane Fuel Cell stack using representative elementary volumes of stamped metallic bipolar plates

137

Mechanical simulation of muscle loading on the proximal femur: analysis of cemented femoral component migration with and without muscle loading

138

Mechanical sludge disintegration for the production of carbon source for biological nutrient removal

139

Mechanical solid-state formation of Y1−xCexAlO3 and its application as an X-ray scintillator

140

Mechanical solid-state formation of Y1−xCexAlO3 and its application as an X-ray scintillator

141

Mechanical solutions for drawing processes under plane strain conditions by the upper bound method

142

Mechanical Sound by Karin Bijsterveld

143

Mechanical sowing of safflower on broad bed furrow

144

Mechanical spectra and calorimetric evaluation of gelatin–xanthan gum systems with high levels of co-solutes in the glassy state

145

Mechanical spectroscopy and structural evolution of CuMo thin films

146

Mechanical spectroscopy connected to creep and stress relaxation in a high resistant silicon nitride

147

Mechanical spectroscopy in carbon nanotube reinforced ABS

148

Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

149

Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K

150

Mechanical spectroscopy measurements on SMA high-damping composites

151

Mechanical spectroscopy methods for the quantitative analysis of intergranular glass viscosity in polycrystalline ceramics

152

Mechanical spectroscopy of 18-carat AuCuPd white gold alloys

153

Mechanical spectroscopy of Al–Cu–Fe quasicrystalline coatings

154

Mechanical spectroscopy of Al–Cu–Fe quasicrystalline coatings

155

Mechanical spectroscopy of bovine compact bone

156

Mechanical spectroscopy of bovine compact bone

157

Mechanical spectroscopy of creep appearance in fine-grained yttria-stabilized zirconia

158

Mechanical spectroscopy of deformed WE43 magnesium alloys

159

Mechanical spectroscopy of hydrogen-absorbing quasicrystals

160

Mechanical spectroscopy of hydrogen-absorbing quasicrystals

161

Mechanical spectroscopy of i-Al–Pd–Mn and d-Al–Ni–Co

162

Mechanical spectroscopy of i-Al–Pd–Mn and d-Al–Ni–Co

163

Mechanical spectroscopy of interface stress relaxation in metal–matrix composites

164

Mechanical spectroscopy of magnetite filled polyurethane shape memory polymers

165

Mechanical spectroscopy of Mg reinforced with Al2O3 short fibers and C nanotubes

166

Mechanical spectroscopy of Mg reinforced with Al2O3 short fibers and C nanotubes

167

Mechanical spectroscopy of Mn–Zn ferrite

168

Mechanical spectroscopy of nanoparticle reinforced, electrodeposited ultrafine grained nickel Original Research Article

169

Mechanical spectroscopy of ordered ferromagnetic Fe3Al intermetallic compounds

170

Mechanical spectroscopy of ordered ferromagnetic Fe3Al intermetallic compounds

171

Mechanical spectroscopy of polymer-magnetite composites

172

Mechanical spectroscopy of polymer-magnetite composites

173

Mechanical spectroscopy of quasicrystals*1

174

Mechanical spectroscopy of the high-temperature brittle-to-ductile transition in ceramics and cermets

175

Mechanical spectroscopy of the Zener relaxation in Fe–22Al and Fe–26Al alloys

176

Mechanical spectroscopy of thermal stress relaxation at metal–ceramic interfaces in Aluminium-based composites Original Research Article

177

Mechanical spectroscopy of thin layers of PPV polymer on Si substrates

178

Mechanical spectroscopy of thin layers of PPV polymer on Si substrates

179

Mechanical spectroscopy of thin polystyrene films

180

Mechanical spectroscopy of vibrated granular matter

181

Mechanical spectroscopy study of thermo-mechanically treated 51CrV4 steel

182

Mechanical spectroscopy, internal friction and ultrasonic attenuation: Collection of works

183

Mechanical stabilisation of martensite due to cold deformation

184

Mechanical stabilisation of martensite due to cold deformation

185

Mechanical stabilisation of retained austenite in δ-TRIP steel

186

Mechanical stabilities of K4 carbon and K4-like NaC2 Original Research Article

187

Mechanical stability and electrical conductivity of Cu–Ag filamentary microcomposites

188

Mechanical stability and electrical conductivity of Cu–Ag filamentary microcomposites

189

Mechanical stability and transport properties of the Sn-promoted SrCo0.8Fe0.2O3−δ ceramic membrane

190

Mechanical stability of adhesives under water storage

191

Mechanical stability of BaTiO3-based PTC thermistor components: experimental investigation and theoretical modelling

192

Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region

193

Mechanical stability of high-speed planetary gears

194

Mechanical stability of high-speed planetary gears

195

Mechanical Stability of Immobilized Biocatalysts (CLECs) in Dilute Agitated Suspensions

196

Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading

197

Mechanical Stability Of Mt. Vesuvius Volcano: Effects Of Asymmetries On The Stress Field

198

Mechanical Stability of RCSed and ECAPed Intramedullary 316L Stainless Steel Nails in the Treatment of Diaphyseal Bone Fractures

199

Mechanical stability of resin–dentin bond components

200

Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process

201

Mechanical stability of structured bone grafts from the anterior iliac crest

202

Mechanical stability of the in vivo lumbar spine: implications for injury and chronic low back pain

203

Mechanical stability under sliding contact of thin silver film embedded in brittle multilayer

204

Mechanical Stabilization of Cemented Soil-Fly Ash Mixtures with Recycled Plastic Strips

205

Mechanical State Analysis of Load-Bearing Systems. Part 1. The Ultimate State

206

Mechanical State Analysis of Load-Bearing Systems. Part 2. The Damage State

207

Mechanical stiffness of thermally sprayed coatings and elastic constants for stress evaluation by X-ray diffraction

208

Mechanical stiffness of thermally sprayed coatings and elastic constants for stress evaluation by X-ray diffraction

209

Mechanical stimulation and mitogen-activated protein kinase signaling independently regulate osteogenic differentiation and mineralization by calcifying vascular cell

210

Mechanical stimulation by intermittent hydrostatic compression promotes bone-specific gene expression in vitro

211

Mechanical stimulation effects on functional end effectors in osteoblastic MG-63 cells

212

Mechanical stimulation increases proliferation, differentiation and protein expression in culture: Stimulation effects are substrate dependent

213

Mechanical stimulation of gingiva reduces plasma 8-OHdG level in rat periodontitis

214

Mechanical stimulation of individual stereocilia of living cochlear hair cells by atomic force microscopy

215

Mechanical stimulation of individual stereocilia of living cochlear hair cells by atomic force microscopy

216

Mechanical stimulation of rat tail vertebrae induces indomethacin-sensitive expression of insulin-like growth factor-1 mRNA in osteocytes

217

Mechanical stimuli enhances the expression of RGD-CAP/βig-h3 in the periodontal ligament

218

Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties

219

Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties

220

Mechanical strain activates estrogen response elements in bone cells

221

Mechanical strain and fluid movement both activate extracellular regulated kinase (ERK) in osteoblast-like cells but via different signaling pathways

222

Mechanical strain characteristics of cold worked Fe72Al28 and Fe75Ni25 alloys: A positron annihilation coincidence Doppler broadening view

223

Mechanical strain enhances no production and upregulates nNOS mRNA levels

224

Mechanical strain increases gene transfer to skeletal muscle cells

225

MECHANICAL STRAIN MODULATES MONOCYTE CHEMOTACTIC PROTEIN-1 AND IL-1BETA EXPRESSION BY CULTURED HUMAN AORTIC SMOOTH MUSCLE CELLS

226

Mechanical strain promotes angiotensin II-induced matrix metallo-proteinase-2 activity in human vascular smooth muscle cells

227

Mechanical strain sensitizes human vascular smooth muscle cells to angiotensin II

228

Mechanical strain stimulates a mitogenic response in coronary vascular smooth muscle cells via release of basic fibroblast growth factor

229

Mechanical strain, induced noninvasively in the high-frequency domain, is anabolic to cancellous bone, but not cortical bone

230

Mechanical stratigraphy and fault–fold interaction, Absaroka thrust sheet, Salt River Range, Wyoming

231

Mechanical stratigraphy and the transition from trishear to kink-band fault-propagation fold forms above blind basement thrust faults: A discrete-element study

232

Mechanical stratigraphy as a factor controlling the development of a sandbox transfer zone: a three-dimensional analysis

233

Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates

234

Mechanical Strength and Durability Properties of High Performance Mortar Containing Densified Silica Fume

235

Mechanical strength and electrical conductivity of Ni-YSZ cermets fabricated by viscous processing

236

Mechanical strength and failure characteristics of cast Mg–9%Al–1%Zn alloys produced by a heated-mold continuous casting process: Fatigue properties

237

Mechanical strength and hydrophobicity of cotton fabric after image plasma treatment

238

Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes

239

Mechanical strength and microstructure evolution of fly ash cement mortar submerged in pig slurry

240

Mechanical strength and rewetting stability of nickel laterite pellets

241

Mechanical strength and setting times estimation of hydroxyapatite cement by using neural network

242

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

243

Mechanical strength characteristics of asymmetric tilt grain boundaries in graphene

244

Mechanical strength evaluation for Nd-YAG laser and electric resistance spot weld (ERSW) joint under multiaxial loading

245

Mechanical strength improvement of a soda-lime–silica glass by thermal treatment under flowing gas

246

Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy

247

Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy

248

Mechanical strength of abalone nacre: Role of the soft organic layer

249

Mechanical strength of an ITER coil insulation system under static and dynamic load after reactor irradiation

250

Mechanical strength of bone allografts subjected to chemical sterilization and other terminal processing methods

251

Mechanical strength of calcium phosphate cement in vivo and in vitro

252

Mechanical strength of GeSi solid solution

253

Mechanical strength of GeSi solid solution

254

Mechanical strength of latissimus dorsi tendon transfer with Teflon felt augmentation

255

Mechanical strength of mediopatellar plica – The influence of its fiber content

256

Mechanical strength of nanosized hexagonal silica honeycombs

257

Mechanical strength of neutron-irradiated window materials

258

Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC

259

Mechanical strength of the binary compound Ni3Al

260

Mechanical strength of the binary compound Ni3Al

261

Mechanical strength of the cement–bone interface is greater in shear than in tension

262

Mechanical strength of the proximal femur as predicted from geometric and densitometric bone properties at the lower limb versus the distal radius

263

Mechanical strength of the thoracolumbar spine in the elderly: prediction from in situ dual-energy X-ray absorptiometry, quantitative computed tomography (QCT), upper and lower limb peripheral QCT, and quantitative ultrasound

264

Mechanical Strength of the Titin Z1Z2-Telethonin Complex

265

Mechanical strength of the transition zone at the boundary between opal-A and opal-CT zones in siliceous rocks

266

Mechanical Strength of Trass as Supplementary Cementing Material

267

Mechanical strength of various cyanate ester/epoxy insulation systems after fast neutron irradiation to the ITER design fluence and beyond

268

Mechanical strength, and oxygen and electronic transport properties of SrCo0.4Fe0.6O3−δ-YSZ membranes

269

Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement

270

Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder

271

Mechanical Stress Acts via Katanin to Amplify Differences in Growth Rate between Adjacent Cells in Arabidopsis

272

Mechanical stress and electric potential in cymbal piezoceramics by FEA

273

Mechanical stress control in a VLSI-fabrication process: a method for obtaining the relation between stress levels and stress-induced failures

274

Mechanical stress during phonation in a self-oscillating finite-element vocal fold model

275

Mechanical stress effect on oxygen ion mobility in 8 mol% yttria-stabilized zirconia electrolyte

276

Mechanical stress eliminates the effects of plasma from patients with preeclampsia on endothelial cells, , ,

277

Mechanical stress enhances production of cytokines in human periodontal ligament cells induced by Porphyromonas gingivalis

278

Mechanical stress in ALD-Al2O3 films

279

Mechanical stress in coevaporated b-FeSi thin films on silicon 2qÍ substrates

280

Mechanical stress induced activity and phase composition changes in sulfated zirconia catalysts

281

Mechanical Stress Induced Mechanism of Microtubule Catastrophes

282

Mechanical Stress Induced Mechanism of Microtubule Catastrophes Original Research Article

283

Mechanical stress induces COX-2 mRNA expression in bone cells from elderly women

284

Mechanical stress promotes the expression of smooth muscle-like properties in marrow stromal cells

285

Mechanical stress reduction in PECVD a-Si:H thin films

286

Mechanical stress reduction in PECVD a-Si:H thin films

287

Mechanical stress studies of amorphous GexSb40−xS60 film

288

Mechanical Stress: An Independent Determinant of Early Bioprosthetic Calcification in Humans

289

Mechanical stress-dependent secretion of interleukin 6 by endothelial cells after portal vein embolization: clinical and experimental studies

290

Mechanical Stresses in a Linear Plastic FGM Hollow and Solid Rotational Disk

291

Mechanical Stresses in a Linear Plastic FGM Hollow Cylinder Due to Non-Axisymmetric Loads

292

Mechanical stresses in carotid plaques using MRI-based fluid–structure interaction models

293

Mechanical stresses in fixed-speed wind turbines due to network disturbances

294

Mechanical stresses in silicon carbonitride films obtained by PECVD from hexamethyldisilazane

295

Mechanical stresses of a layer of colloidal particles aggregated by means of an electric field

296

Mechanical stretch in anterior cruciate ligament derived cells regulates type I collagen and decorin expression through extracellular signal-regulated kinase 1/2 pathway

297

Mechanical Stretch Induces Platelet-activating Factor Receptor Gene Expression Through the NF-κB Transcription Factor

298

Mechanical stretch is a down-regulatory signal for differentiation of C2C12 myogenic cells

299

Mechanical Stretch of Atrial Myocyte Monolayer Decreases Sarcoplasmic Reticulum Calcium Adenosine Triphosphatase Expression and Increases Susceptibility to Repolarization Alternans

300

Mechanical stretch promotes proliferation of rat bone marrow mesenchymal stem cells

301

Mechanical stretching of proteins: calmodulin and titin

302

Mechanical structure–property relationship of aerogels

303

Mechanical study of metallized polyethylene terephthalate (PET) films

304

Mechanical study of PLA–PCL fibers during in vitro degradation

305

Mechanical sub-cooling vapor compression systems: Current status and future directions

306

Mechanical support availability in pediatric cardiac surgery: Program size should not matter

307

Mechanical support for cardiac and respiratory failure in pediatric patients: Edited by Brian W. Duncan, MD, 2001, New York, New York, Marcel Dekker, Inc, 369 pp, illustrated, $165.00, ISBN: 0-8247-0275-1

308

Mechanical Support in Dilated Cardiomyopathy: Signs of Early Left Ventricular Recovery

309

Mechanical suppression of the dynamic foam head in bubble column reactors

310

Mechanical surface treatments effects on corrosion of AISI 316 Ti stainless steel in chloride environments

311

Mechanical surface treatments of electro-discharge machined (EDMed) ceramic composite for improved strength and reliability

312

Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE)

313

Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance

314

Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance

315

Mechanical surface treatments on titanium, aluminum and magnesium alloys

316

Mechanical surface treatments on titanium, aluminum and magnesium alloys

317

Mechanical synthesis and characterization of Bi4Ti3O12 nanopowders

318

Mechanical synthesis and rapid consolidation of a nanocrystalline 5.33Fe0.37Cr0.16Al0.4Si0.07–Al2O3 composite by high-frequency induction heating

319

Mechanical synthesis and rapid consolidation of nanostructured FeAl–Al2O3 composites by high-frequency induction heated sintering

320

Mechanical synthesis in the iron oxide–metal system

321

Mechanical synthesis in the iron oxide–metal system

322

Mechanical synthesis of copper–carbon nanocomposites: Structural changes, strengthening and thermal stabilization

323

Mechanical synthesis of nanocrystalline α-Al2O3 seeds for enhanced transformation kinetics

324

Mechanical synthesis of nanostructured titanium–nickel alloys

325

Mechanical Synthesis of Zn-HKUST-1 Metal-Organic Framework and Investigation its Fluorescence Sensing Ability Toward to Detect Explosive-like Nitro aromatic Analytes Such as TNT

326

Mechanical system reliability analysis using a combination of graph theory and Boolean function

327

Mechanical system reliability analysis using a combination of graph theory and Boolean function

328

Mechanical systems in the quantum regime

329

Mechanical systems in the quantum regime

330

Mechanical systems related to the Schrödinger spectral problem

331

Mechanical tenderisation of beef muscles for use in re-formed joints made with a cold-set binder

332

Mechanical tenderization can alter fresh muscle characteristics of steaks from the beef round

333

Mechanical tensile promotion and superconducting properties of highly Pb-content HTc-BPSCCO superconductor

334

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

335

Mechanical tensile properties by spherical macroindentation using an indentation strain-hardening exponent

336

Mechanical tensile test of the full-size ITER TF conductor jacket materials at 4.2 K

337

Mechanical tension in the median nerve. The effects of joint positions

338

Mechanical tension stimulates the transdifferentiation of fibroblasts into myofibroblasts in human burn scars

339

Mechanical test on the ITER CC and Feeder jacket

340

Mechanical testing and modelling of a vertically aligned carbon nanotube composite structure

341

Mechanical testing and numerical modelling of pull-wound carbon-epoxy spinnaker poles

342

Mechanical testing and osteointegration of titanium implant with calcium phosphate bone cement and autograft alternatives

343

Mechanical Testing in Unsaturated Soils

344

Mechanical testing of a FW panel attachment system for ITER

345

Mechanical testing of cancellous bone from the femoral head: Experimental errors due to off-axis measurements

346

Mechanical testing of disks under gaseous pressure

347

Mechanical testing of electrospun PCL fibers

348

Mechanical testing of hip protectors

349

MECHANICAL TESTING OF POLYSIUCON THIN FILMS WITH THE ISDG

350

Mechanical testing of recombinant human bone morphogenetic protein-7 regenerated bone in sheep mandibles

351

Mechanical testing of shoulder prostheses and recommendations for glenoid design

352

Mechanical testing of steel/aluminium–silicon interfaces by pushout

353

Mechanical testing of the ITER vacuum vessel support structure – coating screening tests and high load multi-axial Mock Up tests

354

Mechanical testing of thermally stressed materials with rough interfaces: Mechanically induced delamination cracking in thermal barrier composites

355

Mechanical testing of titanium/aluminium–silicon interface: Effect of T6 heat treatment

356

Mechanical testing of titanium/aluminium–silicon interfaces by push-out

357

Mechanical testing via dominant shear deformation of small-sized specimen

358

Mechanical tests and finite element models for bone holding power of tibial locking screws

359

Mechanical tests of ATLAS Barrel Toroid tie rods Original Research Article

360

Mechanical Tests on Pervasively Jointed Rock Material: Insight into Rock Mass Behaviour

361

Mechanical tests on the welding part of SS316LN after heat treatment for Nb3Sn superconducting conductor

362

Mechanical tests on two batches of oxide dispersion strengthened RAFM steel (EUROFER97)

363

Mechanical thinning to make few-layer graphene from pencil lead

364

Mechanical Thrombectomy for Perioperative Acute Ischemic Stroke: Two Noncardiac and Non-neurosurgical Case Reports and a Literature Review

365

Mechanical Thrombectomy in Hemodialysis Access Shunts Using a 5F Pigtail Rotation Catheter In Vitro and In Vivo Investigations

366

Mechanical Tooth Depuration and Pocket Depth: A Correlative Clinical Study

367

Mechanical Transformation of Compounds Leading to Physical, Chemical, and Biological Changes in Pharmaceutical Substances

368

MECHANICAL TRANSMISSION AND SURVIVAL OF BACTERIAL WILT ON ENSET

369

Mechanical transmission of maize rayado fino marafivirus (MRFV) to maize and barley by means of the vascular puncture technique

370

Mechanical Transplanter for Agriculture Mechanization Education

371

MECHANICAL TRANSPORT AND TRANSMISSION OF CRYPTOSPORIDIUM PARVUM OOCYSTS BY WILD FILTH FLIES

372

Mechanical transport of metallogenic materials in endogenic hydrothermal solutions: evidence from the microspherules in micro-disseminated gold deposits, northwestern Sichuan, China

373

Mechanical treatment of artrial fibrillation: Removal of pericardial cyst by thoracoscopy

374

Mechanical treatment of fly ashes: Part IV. Strength development of ground fly ash-cement mortars cured at different temperatures

375

Mechanical twinning and texture evolution in severely deformed Ti–6Al–4V at high temperatures Original Research Article

376

Mechanical twinning in calcite considered with the concept of ferroelasticity

377

Mechanical twinning of jadeite - an indication of synseismic loading beneath the brittle-plastic transition

378

Mechanical twins in 304 stainless steel after small-charge explosions

379

Mechanical twins, their development and growth

380

Mechanical Unbinding of Aβ Peptides from Amyloid Fibrils

381

Mechanical Unfolding of a Titin Ig Domain: Structure of Transition State Revealed by Combining Atomic Force Microscopy, Protein Engineering and Molecular Dynamics Simulations

382

Mechanical Unfolding of a Titin Ig Domain: Structure of Unfolding Intermediate Revealed by Combining AFM, Molecular Dynamics Simulations, NMR and Protein Engineering

383

Mechanical unfolding of titin I27 domain: Nanoscale simulation of

384

Mechanical Unfolding of TNfn3: The Unfolding Pathway of a fnIII Domain Probed by Protein Engineering, AFM and MD Simulation

385

Mechanical Unfolding of Two DIS RNA Kissing Complexes from HIV-1

386

Mechanical Unfoldons as Building Blocks of Maltose-binding Protein

387

Mechanical unloading improves intracellular Ca2+ regulation in rats with doxorubicin-induced cardiomyopathy Original Research Article

388

Mechanical unloading of the heart activates the calpain system

389

Mechanical unloading of the rat heart involves marked changes in the protein kinase–phosphatase balance

390

Mechanical validation of a tomographic (pQCT) index for noninvasive estimation of rat femur bending strength

391

Mechanical Validation of the Three-Dimensional Intersection Geometry between the Puente Hills Blind-Thrust System and the Whittier Fault, Los Angeles, California

392

Mechanical validation of whole bone composite femur models

393

Mechanical validation of whole bone composite tibia models

394

Mechanical valve performance

395

Mechanical Valve Thrombosis With Dabigatran

396

Mechanical valves

397

Mechanical vapor compression desalination systems — A case study Original Research Article

398

Mechanical Ventilation and Air Leaks After Lung Biopsy for Acute Respiratory Distress Syndrome

399

Mechanical Ventilation and Anesthesia Strategies in Patients with Acute Respiratory Failure Due to Guillain-Barré Syndrome

400

Mechanical ventilation and multiple organ failure

401

Mechanical ventilation care in severe childhood neurological disorders

402

Mechanical Ventilation during Extracorporeal Membrane Oxygenation in Patients with Acute Severe Respiratory Failure

403

Mechanical ventilation in an obstetric population

404

Mechanical ventilation in an obstetric population: Characteristics and delivery rates

405

Mechanical Ventilation in Chest Trauma

406

MECHANICAL VENTILATION IN CHRONIC OBSTRUCTIVE PULMONARY DISEASE PATIENTS

407

Mechanical Ventilation Learns New Tricks

408

Mechanical ventilation may not be essential for initial cardiopulmonary resuscitation: Noe M, Weil MH, Tang W, et al Chest 108:821–827 September 1995

409

Mechanical ventilation strategy following Glenn and Fontan surgeries: On going challenge!

410

Mechanical ventilation with conventional volumes and pressures are not associated with increased air leaks or increased mortality

411

Mechanical ventilation: A review for the internist

412

Mechanical ventricular assistance in heart failure: pathology of the cardiac apex removed during device implantation

413

Mechanical ventricular assistance: An economical and effective means of treating end-stage heart disease

414

Mechanical verification of Lamport’s Bakery algorithm

415

Mechanical verification of soft-tissue attachment on bioactive glasses and titanium implants

416

Mechanical versus biological valve prosthesis: A ten-year comparison regarding function and quality of life

417

Mechanical vibration assisted plasma etching for etch rate and anisotropy improvement

418

Mechanical vibration model for chromosomes in metaphase of mitosis and possible application to the interruption of cell division

419

Mechanical vibration-assisted modulation of E. coli binding to poly-l-lysine coated biosensor surface

420

Mechanical vibration-induced particulate deposition and ionic mineralization at material boundaries in the fluid media

421

Mechanical viscoelastic behavior of dental adhesives

422

Mechanical vs. electrical failure mechanisms in high voltage, high energy density multilayer ceramic capacitors

423

Mechanical Vulnerability of L3-L4 Spinal Segment after Fusion Surgery Utilizing Dynamic Stress Analysis

424

Mechanical weeding of Rumex obtusifolius L. under different N, P and K availabilities in permanent grassland

425

Mechanical within-row weed control for transplanted crops using computer vision

426

Mechanical work and conversion degree in mechanically induced processes

427

Mechanical work and conversion degree in mechanically induced processes

428

Mechanical work and conversion degree in mechanically induced processes

429

Mechanical working of 2124 Al alloy—SiCp cast composites

430

Mechanical, acoustic and electrical properties of porous Ti-based metallic glassy/nanocrystalline composites

431

Mechanical, barrier and morphological properties of pea starch and peanut protein isolate blend films

432

Mechanical, biological and structural characterization of human atherosclerotic femoral plaque tissue

433

Mechanical, biological and structural characterization of in vitro ruptured human carotid plaque tissue

434

Mechanical, chemical and acoustic properties of new hybrid ceramic-polymer varnishes for musical instruments

435

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

436

Mechanical, Crystallographic, and Microstructural Analysis of Polymer Composites Developed from Iron Filings and Polystyrene Wastes

437

Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibers

438

Mechanical, Electrical, and Magnetic Properties of Ni Nanocontacts

439

Mechanical, electrical, piezoelectric and electro-active behavior of aligned multi-walled carbon nanotube/cellulose composites Original Research Article

440

Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel

441

Mechanical, electrochemical and tribological properties of nanocrystalline surface of brass produced by sandblasting and annealing

442

Mechanical, electronic and optical properties of antifluorites semiconductors X2C (X = Mg, Be)

443

Mechanical, electronic and thermodynamic properties of Mg2Ca Laves phase under high pressure: A first-principles calculation

444

Mechanical, fatigue and microstructural properties of friction stir welded 5083-H111 and 6082-T651 aluminum alloys

445

Mechanical, fracture-mechanical, hydric, thermal, and durability properties of lime–metakaolin plasters for renovation of historical buildings

446

Mechanical, material, and antimicrobial properties of acrylic bone cement impregnated with silver nanoparticles

447

Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion

448

Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks

449

Mechanical, microstructure and texture characterization of API X65 steel

450

Mechanical, moisture absorption, and biodegradation behaviours of bacterial cellulose fibre-reinforced starch biocomposites

451

Mechanical, morphological and dielectric properties of sintered mullite ceramics at two different heating rates prepared from alkaline monophasic salts

452

Mechanical, morphological and thermal properties of in situ ternary composites based on poly(ether imide), silicone rubber and liquid crystalline polymer

453

Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour bio-composites

454

Mechanical, Morphological Properties and Chemical Resistance of Filled Rattan Wastes Powder Epoxy Composites

455

Mechanical, photocatalytic and microbiological properties of titanium dioxide thin films synthesized with the sol–gel and low temperature plasma deposition techniques

456

Mechanical, physicochemical and color properties of chitosan based-films as a function of Aloe vera gel incorporation

457

Mechanical, pyrolysis, and combustion characterization of briquetted coal fines with municipal solid waste plastic (MSW) binders

458

Mechanical, Rheological and Computational Study of PVP/PANI with Additives

459

Mechanical, rheological, and swelling behavior of natural rubber/montmorillonite aerogels prepared by freeze-drying

460

Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles

461

Mechanical, sorption and adhesive properties of composites based on low density polyethylene filled with date palm wood powder

462

Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres Original Research Article

463

Mechanical, swelling, and thermal aging properties of marble sludge-natural rubber composites

464

Mechanical, thermal and ablative properties of interply continuous/spun hybrid carbon composites Original Research Article

465

Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites

466

Mechanical, thermal and laser damage threshold analyses of II group metal complexes of thiourea

467

Mechanical, thermal and morphological characterization of recycled LDPE/corn starch blends

468

Mechanical, Thermal and Morphological Properties of Recycled and Virgin PC/ wollastonite Composite and its Compatibilization by SBC

469

Mechanical, thermal and structural properties of rice starch films reinforced with rice starch nanocrystals

470

Mechanical, thermal and tribological characterization of a UHMWPE film reinforced with carbon nanotubes coated on steel

471

Mechanical, thermal, morphological and leaching properties of nonmetallic printed circuit board waste in recycled HDPE composites

472

Mechanical, Thermo-Physical and Ablation Properties of Nitrile Based Nanocomposite

473

Mechanical, thermophysical and fire properties of sansevieria fiber-reinforced polyester composites

474

Mechanical, tribological and erosion behaviour of super-elastic hard Ti–Si–C coatings prepared by PECVD

475

Mechanical, tribological, and electrochemical behavior of Cr1−xAlxN coatings deposited by r.f. reactive magnetron co-sputtering method

476

Mechanical, water vapor barrier and thermal properties of gelatin based edible films

477

Mechanical/physical characteristics of polymer mortar recycled from rapid-chilled steel slag

478

Mechanical/structural reliability evaluation through Esscherʹs method of approximation

479

Mechanical/thermal dewatering of lignite. Part 2: A rheological model for consolidation and creep process

480

Mechanical/thermal dewatering of lignite. Part 3: Physical properties and pore structure of MTE product coals

481

Mechanical/thermal dewatering of lignite. Part 4: Physico-chemical properties and pore structure during an acid treatment within the MTE process

482

Mechanical/Thermal Sources in a Micropolar Thermoelastic Medium Possessing Cubic Symmetry without Energy Dissipation

483

Mechanical-activation-assisted combustion synthesis of SiC powders with polytetrafluoroethylene as promoter

484

Mechanical-activation-assisted combustion synthesis of α-SiAlON in air

485

MECHANICALAND METALLURGICAL PROPERTIES OFWIDE-GAP ALUMINOTHERMIC RAILWELDS

486

Mechanical–biological waste treatment and the associated occupational hygiene in Finland

487

Mechanical-dry coating of wax onto copper powder by ball milling

488

Mechanical-dry coating of wax onto copper powder by ball milling

489

Mechanical-dry coating of wax onto copper powder by ball milling

490

Mechanical–electrochemical modeling of Li-ion battery designed for an electric scooter

491

Mechanically Activated Combustion Synthesis of B4C-TiB2 Nanocomposite Powder

492

Mechanically activated effect of friction stir processing in Al–Ti reaction

493

Mechanically Activated Enzymatic Hydrolysis of Pea Seeds and Its Effects on Bakery Products

494

Mechanically activated minerals as a sink for CO2

495

Mechanically activated PLZT ceramics: Structural and electrical properties

496

Mechanically activated Pt–Ni and Pt–Co alloys as electrocatalysts in the oxygen reduction reaction

497

Mechanically activated reactive extrusion synthesis (MARES) of NiTi

498

Mechanically activated reactive forging synthesis (MARFOS) of NiTi

499

Mechanically Activated Synthesis of Nanocrystalline Powders of Ferroelectric Bismuth Vanadate

500

Mechanically activated synthesis of nanocrystalline ternary carbide Fe3Mo3C

501

Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system

502

Mechanically activated synthesis studied by X-ray diffraction in the Fe–Al system

503

Mechanically activated transformations in the coordination sphere of platinum complexes induced by impact grinding of solid K2PtX6 (X=Cl, Br) and K2PtCl4 salts

504

Mechanically activating formation of layered structured bismuth titanate

505

Mechanically Activating Nucleation and Growth of Complex Perovskites

506

Mechanically active athermalization of a forward looking infrared system

507

Mechanically adjustable chemostats based on stimuli-responsive polymers

508

Mechanically alloyed Al–I composite materials Original Research Article

509

Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: Powder processing, consolidation and mechanical strength and hardness of the as-extruded materials

510

Mechanically alloyed and hot pressed Ni–49.7Ti alloy showing martensitic transformation

511

Mechanically alloyed and hot pressed Ni–49.7Ti alloy showing martensitic transformation

512

Mechanically alloyed Mg2Ni for metal-hydride–air secondary battery

513

Mechanically alloyed Mg–Ni–Ti and Mg–Fe–Ti powders as hydrogen storage materials

514

Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties

515

Mechanically alloyed multi-component Mo-based amorphous alloys with wide supercooled liquid region

516

Mechanically alloyed nanocomposites

517

Mechanically alloyed nanocrystalline iron and copper mixture: behavior and constitutive modeling over a wide range of strain rates

518

Mechanically alloyed tungsten carbide particle/Ti50Cu28Ni15Sn7 glassy alloy matrix composites

519

Mechanically alloyed Zr–Cu–Al–Ni–C glassy powders

520

Mechanically alloyed Zr–Cu–Al–Ni–C glassy powders

521

Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques

522

Mechanically aspirated radiation shields: A CFD and neural network design analysis

523

Mechanically assisted electroplating of Ni–P coatings on carbon steel

524

Mechanically based models: Adaptive refinement for B-spline finite element

525

Mechanically controlled domain structure in PZT piezoelectric ceramics

526

Mechanically controlled moisture removal from greenhouses

527

Mechanically coupled high dynamic linear motors – A new design approach and its control strategy

528

Mechanically coupled laminates with balanced plain weave

529

Mechanically Drawn Hydrogels Uniaxially Orient Hydroxyapatite Crystals and Cell Extension

530

Mechanically driven phase transformation in single phase Al62.5Cu25Fe12.5 quasi-crystals: Effect of milling intensity Original Research Article

531

Mechanically driven phase transition of fullerene Original Research Article

532

Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modes

533

Mechanically grooved, double sided, buried contact silicon solar cells

534

Mechanically immobilized nickel aquapentacyanoferrate modified electrode as an amperometric sensor for the determination of BHA

535

Mechanically improved and optically transparent polycarbonate/clay nanocomposites using phosphonium modified organoclay

536

Mechanically induced cation redistribution in magnesium ferrite and its thermal stability

537

Mechanically induced crystallization of polymers

538

Mechanically induced decrease of the Li conductivity in an alumosilicate glass

539

Mechanically induced electrical potentials of articular cartilage

540

Mechanically induced EPR signals in tooth enamel

541

Mechanically induced metatarsalgia

542

Mechanically induced oxidation of SrFeO3−δ

543

Mechanically induced phase combination in shape memory alloys by Chebyshev collocation methods

544

Mechanically induced phase transition in Fe4N during ball milling and shock compression of powders

545

Mechanically induced reaction for solid-state synthesis of Mg2Si and Mg2Sn

546

Mechanically induced reactivity of gibbsite: Part 1. Planetary milling

547

Mechanically induced reactivity of gibbsite: Part 2. Attrition milling

548

Mechanically induced self-propagating reaction and consequent consolidation for the production of fully dense nanocrystalline Ti55C45 bulk material

549

Mechanically induced self-propagating reactions: Analysis of reactive substrates and degradation of aromatic sulfonic pollutants

550

Mechanically induced structural modifications in metal-doped lamellar silica

551

Mechanically manufactured selective solar absorber surfaces

552

mechanically metallized Si3N4 and stainless steel

553

Mechanically milled AA6061/(Ti3Al)P MMC reinforced with intermetallics – the structure and properties

554

Mechanically milled alanates as hydrogen storage materials

555

Mechanically milled coal and magnesium composites for hydrogen storage Original Research Article

556

Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems

557

Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems

558

Mechanically polished copper surfaces modified with n-dodecanethiol and 3-perfluorooctyl-propanethiol

559

Mechanically produced Hazelnut Skin Micro and Nano Biosorbents for the Fast Removal of Lead Ions from Polluted Waters

560

Mechanically Produced Sub-Micro and Nano Powders of Mg and Mg/Carbon Composites as Anode Material of Primary and Secondary Mg-Air Batteries

561

Mechanically pulped sisal as reinforcement in cementitious matrices

562

Mechanically regulated expression of a neural glutamate transporter in bone: A role for excitatory amino acids as osteotropic agents?

563

Mechanically reinforced biodegradable nanocomposites. A facile synthesis based on PEGylated silica nanoparticles

564

Mechanically relevant consequences of the composite laminate-like design of the abdominal wall muscles and connective tissues

565

Mechanically robust and highly permeable AquaporinZ biomimetic membranes

566

Mechanically robust poly(3,4-ethylenedioxythiophene)–SiO2 hybrid conductive film prepared by simultaneous vapor phase polymerization

567

Mechanically robust thermally rearranged (TR) polymer membranes with spirobisindane for gas separation

568

MECHANICALLY SHORT CRACK GROWTH FROM NOTCHES IN A MILD STEEL

569

Mechanically simulated muscle forces strongly stabilize intact and injured upper cervical spine specimens

570

Mechanically stable and corrosion resistant superhydrophobic sol–gel coatings on copper substrate

571

Mechanically stable copolyimide for low level stress buffer

572

Mechanically stable implants of synthetic bone mineral by cold isostatic pressing

573

Mechanically stable porous cellulose media for affinity purification of family 9 cellulose-binding module-tagged fusion proteins

574

Mechanically Strain-Induced Modification of Selenium Powders in the Amorphization Process

575

Mechanically strong and thermosensitive macromolecular microsphere composite poly(N-isopropylacrylamide) hydrogels

576

Mechanically strong conducting hydrogels with special double-network structure

577

Mechanically strong double network photocrosslinked hydrogels from N,N-dimethylacrylamide and glycidyl methacrylated hyaluronan

578

Mechanically strong high performance layered polypyrrole nano fibre/graphene film for flexible solid state supercapacitor

579

Mechanically tissue-like elastomeric polymers and their potential as a vehicle to deliver functional cardiomyocytes

580

Mechanically tunable phononic band gaps in three-dimensional periodic elastomeric structures

581

Mechanically tunable phononic band gaps in three-dimensional periodic elastomeric structures

582

Mechanically-based approach to non-local elasticity: Variational principles

583

Mechanically–biologically treated municipal solid waste as a support medium for microbial methane oxidation to mitigate landfill greenhouse emissions

584

Mechanically-reinforced electrospun composite silk fibroin nanofibers containing hydroxyapatite nanoparticles

585

Mechanical-Property Changes of Polymeric and Composite Materials after Low-Temperature Proton Irradiation

586

Mechanical-property evaluation of thin corroded surface layers of ceramic materials by the microindentation technique

587

Mechanical-sensorless induction motor drive based only on dc-link measurements

588

Mechanical-sensorless permanent-magnet motor drive using relative phase information of harmonic currents caused by frequency-modulated three-phase PWM carriers

589

Mechanical-sensorless robust control of permanent-magnet synchronous motor using phase information of harmonic reactive power

590

MechanicalsimulationsofSANDIAIItestsOECDISP48benchmarkOriginalResearchArticle

591

Mechanical-stress relaxation in magnesium-based composites

592

Mechanical-stress relaxation in magnesium-based composites

593

Mechanical–thermal synthesis of Al–Ce/Al2O3 nanocomposite powders

594

Mechanico-chemical interaction of single-walled carbon nanotubes with different host matrices evidenced by SERS spectroscopy

595

Mechanics analysis of two-dimensionally prestrained elastomeric thin film for stretchable electronics

596

Mechanics and actuation properties of bucky gel-based electroactive polymers

597

Mechanics and chemical thermodynamics of phase transition in temperature-sensitive hydrogels

598

Mechanics and computational simulation of blood flow in microvessels

599

Mechanics and control of robots: Krishna C. Gupta; Springer, New York, Inc., 1997, ISBN: 0-387-94923-2

600

Mechanics and control of the flat versus normal foot during the stance phase of walking

601

Mechanics and cooling of pixel detectors

602

Mechanics and cooling of pixel detectors

603

Mechanics and cooling of pixel detectors

604

Mechanics and deformation of the nucleus in micropipette aspiration experiment

605

Mechanics and effective lengths of columns with positive and negative end restraints

606

Mechanics and energy analysis on molten pool spreading during laser solid forming

607

Mechanics and finite elements for the damped dynamic characteristics of curvilinear laminates and composite shell structures

608

Mechanics and fluid transport in a degradable discontinuity

609

Mechanics and Friction at the Nanometer Scale

610

Mechanics and kinematics of soft tissue under indentation are determined by the degree of initial collagen fiber alignment

611

MECHANICS AND MATERIAL ASPECTS IN PREDICTING SERVICEABILITY LIMITED BY STRESS-CORROSION CRACKING

612

Mechanics and mechanisms of fatigue damage and crack growth in advanced materials

613

Mechanics and mechanisms of magmatic underplating: inferences from mafic veins in deep crustal mylonite

614

Mechanics and mechanisms of magmatic underplating: inferences from mafic veins in deep crustal mylonite

615

Mechanics and physics of disclinations in solids

616

Mechanics and physics of quasibrittle fracture of polycrystalline metals under conditions of stress concentration Part 3. Toughness of metals and alloys

617

Mechanics and physics of quasibrittle fracture of polycrystalline metals under conditions of stress concentration. Part 2. Theoretical basis

618

Mechanics and physics of quasibrittle fracture of polycrystalline metals under the conditions of stress concentration. Part I. Experimental results

619

Mechanics and response of a surface rock block subjected to pressure fluctuations: A plucking model and its application

620

Mechanics and test study of flexible membranes ballooning in three dimensions

621

Mechanics and velocity of large landslides

622

Mechanics and velocity of the Lärchberg–Galgenwald landslide (Austria)

623

Mechanics modeling for deformation of nano-grained metals

624

Mechanics of 2D Elastic Stress Waves Propagation Impacted by Concentrated Point Source Disturbance in Composite Material Bars

625

Mechanics of 3-D shear cracks between Rayleigh and shear wave rupture speeds

626

Mechanics of a crushable pebble assembly using discrete element method

627

Mechanics of a Particle in a Riemannian Manifold

628

Mechanics of a rigid circular disc bonded to a cracked elastic half-space

629

Mechanics of a thin, tensioned shell, wrapped helically around a turn-bar

630

Mechanics of adhesive contact at the nanoscale: The effect of surface stress

631

Mechanics of adhesive contact on a power-law graded elastic half-space

632

Mechanics of adhesive joints as a plane problem of the theory of elasticity. Part I: general formulation

633

Mechanics of advancing pin-loaded contacts with friction

634

Mechanics of anisotropic hierarchical honeycombs

635

Mechanics of arterial subfailure with increasing loading rate

636

Mechanics of Avian Fibrous Periosteum: Tensile and Adhesion Properties During Growth

637

Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes

638

Mechanics of axisymmetric adhesive contact of rough surfaces involving power-law graded materials

639

Mechanics of axisymmetric wavy surface adhesion: JKR–DMT transition solution

640

Mechanics of BCC and FCC hollow-sphere foams

641

Mechanics of binary and polydisperse spherical pebble assembly

642

Mechanics of biomolecules

643

Mechanics of bond under repeated loading

644

Mechanics of bonds in an FRP bonded concrete beam

645

Mechanics of bone/PMMA composite structures: An in vitro study of human vertebrae

646

Mechanics of cable shovel-formation interactions in surface mining excavations

647

Mechanics of carbon nanoscrolls: a review

648

Mechanics of carbon nanotubes: applicability of the continuum-beam models

649

Mechanics of cellular and other low-density materials

650

Mechanics of change: A framework to reconfigure manufacturing systems

651

Mechanics of coal spirals

652

Mechanics of coiled nanotubes in uniaxial tension

653

Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues

654

Mechanics of composite materials in fuel cell systems

655

Mechanics of composites with two families of finitely extensible fibers undergoing large deformations

656

Mechanics of compressive stress evolution during thin film growth

657

Mechanics of concentric carbon nanotubes: Interaction force and suction energy

658

Mechanics of continuous equal-channel angular extrusion

659

Mechanics of coracoacromial ligament transfer augmentation for acromioclavicular joint injuries

660

Mechanics of corrugated surfaces

661

Mechanics of crawling cells

662

Mechanics of crystalline boron nanowires

663

Mechanics of damage initiation and growth in a TBC/superalloy system

664

MECHANICS OF DEEP-WATER PIPELINE LAYING

665

MECHANICS OF DEEP-WATER PIPELINE LAYING

666

Mechanics of deformation of single- and multi-wall carbon nanotubes

667

Mechanics of delamination of a brittle coating strip on a brittle substrate

668

Mechanics of Delaminations in Laminate Composite Structures

669

Mechanics of discontinuous ceramic tile core sandwich structure: Influence of thermal and interlaminar stresses

670

Mechanics of discrete contact

671

Mechanics of DNA Flexibility Visualized by Selective 2′-Amine Acylation at Nucleotide Bulges

672

Mechanics of dual-mode dilative failure in subaqueous sediment deposits

673

Mechanics of electrospun collagen and hydroxyapatite/collagen nanofibers

674

Mechanics of energy transfer and failure of ductile microscale beams subjected to dynamic loading

675

Mechanics of extended continua: modeling and simulation of elastic microstretch materials

676

Mechanics of fatigue crack growth in a bonding interface

677

Mechanics of fibre-reinforced cementitious composites

678

Mechanics of fish skin: A computational approach for bio-inspired flexible composites

679

Mechanics of forced unfolding of proteins

680

Mechanics of fracture and failure in geomaterials

681

Mechanics of fracture in single point incremental forming

682

Mechanics of granular materials: The discrete and the continuum descriptions juxtaposed

683

MECHANICS OF GROWTH OF INTERNAL FATIGUE CRACKS

684

MECHANICS OF GROWTH OF INTERNAL FATIGUE CRACKS

685

Mechanics of hexagonal atomic lattices

686

Mechanics of hierarchical materials

687

Mechanics of high displacement gradient faulting prior to lithification

688

Mechanics of highly deformed elastic shells

689

Mechanics of hollow concrete block masonry prisms under compression: Review and prospects

690

Mechanics of hollow sphere foams

691

Mechanics of hollow sphere foams

692

Mechanics of Immersed Particle Collisions

693

Mechanics of Immersed Particle Collisions

694

Mechanics of indentation for piezoelectric thin films on elastic substrate

695

Mechanics of interface failure in the trilayer elastic composite

696

Mechanics of interstitial-lymphatic fluid transport: theoretical foundation and experimental validation

697

Mechanics of Jointed and Faulted Rocks, edited by Hans-Peter Rossmanith (Balkema, Rotterdam, 1998, 658 p.)

698

Mechanics of landslide initiation as a shear fracture phenomenon

699

Mechanics of large strain extrusion machining and application to deformation processing of magnesium alloys Original Research Article

700

Mechanics of light weight proppants: A discrete approach

701

Mechanics of load transfer from matrix to fiber under flexural loading in a glass matrix composite using microfluorescence spectroscopy

702

Mechanics of longitudinal cracks in tooth enamel

703

Mechanics of machining of face-milling operation performed using a self-propelled round insert milling cutter

704

Mechanics of masonry in compression: Results from a homogenisation approach

705

Mechanics of materials, I saw and participated: a reminiscence

706

Mechanics of materials: M Vable; Oxford University Press; 2002; ISBN: 0-19-513337-4; 774 pp.; Price: £31.99

707

Mechanics of materials: top-down approaches to fracture Original Research Article

708

Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review

709

Mechanics of media motion in tumbling mills with 3d discrete element method

710

Mechanics of micro-milling with round edge tools

711

Mechanics of mixed-mode ductile material removal with a conical tool and the size dependence of the specific energy

712

Mechanics of molecular collagen is influenced by hydroxyapatite in natural bone

713

Mechanics of nanocrack: Fracture, dislocation emission, and amorphization

714

Mechanics of nanoscale wrinkling of graphene on a non-developable surface

715

Mechanics of neutrally bouyant cables

716

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

717

MECHANICS OF NUCLEATION AND GROWTH OF FATIGUE CRACKS

718

MECHANICS OF NUCLEATION AND GROWTH OF FATIGUE CRACKS

719

Mechanics of oblique spreading and ridge segmentation

720

Mechanics of Pb40/Sn60 near-eutectic solder alloys subjected to vibrations

721

Mechanics of physisorption on elastomer surface

722

Mechanics of plain-woven fabrics for inflated structures

723

Mechanics of plasma exposed spin-on-glass (SOG) and polydimethyl siloxane (PDMS) surfaces and their impact on bond strength

724

Mechanics of projectile penetration into non-cohesive soil targets

725

Mechanics of relaxing SiGe islands on a viscous glass

726

Mechanics of robust and releasable adhesion in biology: Bottom–up designed hierarchical structures of gecko

727

Mechanics of roll edge contact in cold rolling of thin strip

728

Mechanics of roll edge contact in cold rolling of thin strip

729

Mechanics of rubber shear springs

730

Mechanics of Saw-Tooth Chip Formation in Metal Cutting

731

Mechanics of Saw-Tooth Chip Formation in Metal Cutting

732

Mechanics of scars

733

Mechanics of shaft-loaded blister test for thin film suspended on compliant substrate

734

Mechanics of shear deformable thin-walled beams made of composite materials

735

Mechanics of sintering for coupled grain boundary and surface diffusion Original Research Article

736

Mechanics of small damage in fiber-reinforced composite materials

737

Mechanics of soft active materials with phase evolution

738

Mechanics of Solid Materials, R.J. Asaro, V.A. Lubarda. Cambridge University Press, Cambridge (2006), ISBN: 978-0-521-85979-0

739

Mechanics of stretchable electronics on balloon catheter under extreme deformation

740

Mechanics of stretchable electronics with high fill factors

741

MECHANICS OF STRINGED INSTRUMENTS

742

Mechanics of structures and materials: Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, A.A. Balkema, Rotterdam, 1995, xix+760pp.

743

Mechanics of superelasticity in Ti–30Nb–(8–10)Ta–5Zr alloy Original Research Article

744

Mechanics of Taylor impact testing of polycarbonate

745

Mechanics of tendon, from an engineering perspective

746

Mechanics of the ankle and subtalar joints revealed through a 3D quasi-static stress MRI technique

747

Mechanics of the anterior drawer test at the ankle: the effects of ligament viscoelasticity

748

Mechanics of the burnishing process

749

Mechanics of the Cell: Overcoming a Fear of Equations

750

Mechanics of the human red blood cell deformed by optical tweezers

751

Mechanics of the hysteretic large strain behavior of mussel byssus threads

752

Mechanics of the middle ear system: computerized measurements of its pressure–volume relationship

753

Mechanics of the pulmonary valve in the aortic position

754

Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates

755

Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants

756

Mechanics of the tapered interference fit in dental implants

757

Mechanics of the WTC collapse

758

Mechanics of thermophoretic and thermally induced edge forces in carbon nanotube nanodevices

759

Mechanics of thick-skinned Variscan overprinting of Cadomian basement (Iberian Variscides)

760

Mechanics of thin ultra-light stainless steel sandwich sheet material: Part I. Stiffness Original Research Article

761

Mechanics of thin ultra-light stainless steel sandwich sheet material: Part II. Resistance to delamination Original Research Article

762

Mechanics of thin-film transistors and solar cells on flexible substrates

763

Mechanics of thin-walled curved beams made of composite materials, allowing for shear deformability

764

Mechanics of three-dimensional braided structures for composite materials - part I: fabric structure and fibre volume fraction

765

Mechanics of three-dimensional braided structures for composite materials – part III: nonlinear finite element deformation analysis

766

Mechanics of three-dimensional braided structures for composite materials ¯ Part II: prediction of the elastic moduli

767

Mechanics of tidally driven fractures in Europaʹs ice shell

768

Mechanics of toe and heel landing in stepping down in ongoing gait

769

Mechanics of torque generation during quadrupedal arboreal locomotion

770

Mechanics of tungsten blistering: A finite element study

771

Mechanics of tunnelling cracks in trilayer elastic materials in tension

772

Mechanics of two-stage crack growth in fretting fatigue

773

Mechanics of ultra-stretchable self-similar serpentine interconnects

774

Mechanics of upward propagation of cover-collapse sinkholes

775

Mechanics of Variscan Orogeny: A modern view on orogenic research

776

Mechanics of vein, fault and solution surface formation in the Appalachian valley and ridge, northeastern tennessee, U.S.A.: implications for fault friction, state of stress and fluid pressure

777

Mechanics of ventricular torsion

778

Mechanics of very fine-grained nanocrystalline materials with contributions from grain interior, GB zone, and grain-boundary sliding

779

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH SOUND AND VIBRATION CONCEPTS, ARTICLE 3

780

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH SOUND AND VIBRATION CONCEPTS—PART 2

781

Mechanics of Vibro-Acoustics Series. USING GUITARS TO TEACH VIBRATIONS AND ACOUSTICS. ARTICLE 4: PSYCHOACOUSTICS AND SOUND QUALITY

782

Mechanics of viscous sintering on the micro- and macro-scale Original Research Article

783

Mechanics of wave reflections in a coronary bypass loop model: the possibility of partial flow cut-off

784

Mechanics of Web Panel Postbuckling Behavior in Shear

785

Mechanics on fractal bodies. Data compression using fractals

786

Mechanics prediction of the fracture pattern on scratching wafers of single crystal silicon Original Research Article

787

Mechanics Problems in Geodynamics. Part II, edited by R. Wang and K. Aki.T

788

Mechanics: The well-spring of mathematics (volume 2)

789

Mechanics-based model for non-affine swelling in perfluorosulfonic acid (PFSA) membranes

790

Mechanics-based scaling laws for the durability of thermal barrier coatings

791

Mechanim of topiramate-induced acute-onet myopia and angle cloure glaucoma

792

Mechanisation of short rotation forestry

793

Mechanised wire-wise verification of Handel-C synthesis

794

Mechanising a formal model of flash memory

795

Mechanising first-order temporal resolution

796

Mechanism about improvement of NiSi thermal stability for Ni/Pt/Si(1 1 1) bi-layered system

797

Mechanism Action of Platelets and Crucial Blood Coagulation Pathways in Hemostasis

798

Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates

799

Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles

800

Mechanism Analysis and Parameter Optimization of Mega-Sub-Isolation System

801

Mechanism analysis for supercritical ethanolysis of Huolinguole lignite

802

Mechanism Analysis Indicates that Recombination Events in HIV-1 Initiate and Complete Over Short Distances, Explaining Why Recombination Frequencies Are Similar in Different Sections of the Genome

803

Mechanism analysis of a trisector

804

Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment

805

Mechanism analysis of quasi-static dense pebble flow in pebble bed reactor using phenomenological approach

806

Mechanism and Activation Parameters of the Reactions of Arenes with VO+2 in Sulfuric Acid

807

Mechanism and active sites for the partial oxidation of methanol to formaldehyde over an electrolytic silver catalyst Original Research Article

808

Mechanism and Antiviral Therapy in Preventing Mother-to-Child Transmission During Pregnancy with Hepatitis B Virus Infection

809

Mechanism and application of solid phase adsorption toxin tracking for monitoring microcystins

810

Mechanism and applications of phosphite dehydrogenase

811

Mechanism and applications of Rieske non-heme iron dioxygenases

812

Mechanism and behavior of bitumen strength reinforcement using fibers

813

Mechanism and characterizations studies of resistive switching effects on a thin FeOx-transition layer of the Ti/TiN/SiO2/FeOx/FePt structure by thermal annealing treatments

814

Mechanism and cleavage specificity of the H-N-H endonuclease colicin E9

815

Mechanism and conditions of the chessboard structure formation Original Research Article

816

Mechanism and control of class-switch recombination

817

Mechanism and control of crack generation in glass substrates during crystallization of a-Si Films by flash lamp annealing

818

Mechanism and control of current transport in GaN and AlGaN Schottky barriers for chemical sensor applications

819

Mechanism and control of electrification in pneumatic conveying of powders

820

Mechanism and Control of Food Allergy

821

Mechanism and deactivation kinetics of S2-xanthione in acetonitrile, a quenching solvent, and of S2-exciplex measured by pico- and femtosecond laser spectroscopy

822

Mechanism and diastereoselectivity of the prebiotic synthesis of deoxyribonucleotide precursors C5-thiazoline: A DFT study

823

Mechanism and direct dynamics studies for the reaction of monoethylsilane EtSiH3 with atomic O (3P)

824

Mechanism and dynamics of shrinking island grains in mazed bicrystal thin films of Au Original Research Article

825

Mechanism and dynamics of the CH2OH+O2 reaction

826

Mechanism and effect of chemical weathering of sedimentary rocks

827

Mechanism and electronic transition in the reaction: On the fly dynamics simulations with multi-reference potentials

828

Mechanism and energetics of dissociative adsorption of SiH3 on the hydrogen-terminated Si(0 0 1)-(2×1) surface

829

Mechanism and Energy Landscape of Domain Swapping in the B1 Domain of Protein G

830

Mechanism and evolution of heat transfer in mushy zone during cold crucible directionally solidifying TiAl alloys

831

Mechanism and favourable operating conditions of organic substrate removal in Microaerophilic Upflow Sludge Bed Reactor (MUSB)

832

Mechanism and Functional Significance of Itk Autophosphorylation

833

Mechanism and gelling effects of linked polymer solution in the core

834

Mechanism and Government Initiatives Promoting Innovation and Commercialization of University Invention

835

Mechanism and Hydrophobic Forces Driving Membrane Protein Insertion of Subunit II of Cytochrome bo3 Oxidase

836

Mechanism and improvement of the visible light photocatalysis of organic pollutants over microcrystalline AgNbO3 prepared by a sol–gel method

837

Mechanism and influencing factors analysis of flowing instability of supercritical endothermic hydrocarbon fuel within a small-scale channel

838

Mechanism and kinetic control of the oxyprecipitation of sulphuric liquors from steel pickling

839

Mechanism and kinetic model for the decolorization of the azo dye Reactive Black 5 by hydrogen peroxide and UV radiation

840

Mechanism and kinetic properties for OH-initiated atmospheric degradation of the organophosphorus pesticide diazinon

841

Mechanism and kinetic studies for OH radical-initiated atmospheric oxidation of methyl propionate

842

Mechanism and kinetic study for the degradation of lindane by photo-Fenton process

843

Mechanism and kinetic study on the gas-phase reactions of OH radical with carbamate insecticide isoprocarb

844

Mechanism and kinetic study on the OH-initiated degradation of 2,3,7,8-tetrachlorinated dibenzofuran in atmosphere Original Research Article

845

Mechanism and kinetics for the reaction of O(3P) with DMSO: A theoretical study

846

Mechanism and kinetics of Al2O3 nanoparticles formation by reaction of bulk Al with H2O and CO2 at sub- and supercritical conditions

847

Mechanism and kinetics of apatite formation on nanocrystalline TiO2 coatings: A quartz crystal microbalance study

848

Mechanism and kinetics of carbide dissolution in near alpha Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd titanium alloy

849

Mechanism and kinetics of color center formation on epitaxial thin films of MgO

850

Mechanism and kinetics of Cr(VI) reduction by waste slag generated from iron making industry

851

Mechanism and kinetics of crystallization of amorphous Fe81B13Si4C2 alloy

852

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

853

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

854

Mechanism and kinetics of electrochemical degradation of isothiazolin-ones using Ti/SnO2–Sb/PbO2 anode Original Research Article

855

Mechanism and kinetics of free-radical degradation of xyloglucan in aqueous solution

856

Mechanism and kinetics of gypsum–anhydrite transformation in aqueous electrolyte solutions

857

Mechanism and kinetics of lithium vapor capture in a high-temperature packed bed of kaolinite

858

Mechanism and kinetics of mechanochemical processes in comminuting devices: 1. Theory

859

Mechanism and kinetics of mechanochemical processes in comminuting devices: 2. Applications of the theory. Experiment

860

Mechanism and kinetics of Na+ ion depletion under the anode during electro-thermal poling of a bioactive glass

861

Mechanism and Kinetics of Nonequilibrium and Multilayer Adsorption and Desorption of Gases on Solids

862

Mechanism and Kinetics of Oxidation of 2,4,6Trichlorophenol by Fentons Reagent

863

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy: Part I. The interplay of sorbent structure and fluid phase conditions

864

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy: Part II. Impact on chromatographic separations

865

Mechanism and kinetics of sodium release from brown coal char particles during combustion

866

Mechanism and Kinetics of the 2,2′-Bipyridyl Catalysis of the Chromium(VI) Oxidation of Malic Acid

867

Mechanism and Kinetics of the 2,2′-Bipyridyl Catalysis of the Chromium(VI) Oxidation of Malic Acid

868

Mechanism and kinetics of the electrochemical CO adlayer oxidation on Pt(111)

869

Mechanism and kinetics of the electrochemical formation of polypyrrole under forced convection conditions

870

Mechanism and kinetics of the free radical ring-opening polymerization of cyclic allylic sulfide lactones

871

Mechanism and kinetics of the NOCO reaction on Rh

872

Mechanism and kinetics of the reaction of 1,4-thioxane with O3 in the atmosphere – A theoretical study

873

Mechanism and kinetics of the selective NO reduction over Co-ZSM-5 studied by the SSITKA technique: 2. Reactivity of NOx-adsorbed species with methane

874

Mechanism and Kinetics of the Selective NO Reduction over Co-ZSM-5 Studied by the SSITKA Technique: Part 1: NOX Adsorbed Species Formation

875

Mechanism and kinetics of thermal decomposition of 5-benzylsulfanyl-2-amino-1,3,4-thiadiazole

876

Mechanism and kinetics of thermal decomposition of ammoniacal complex of copper oxalate

877

Mechanism and kinetics of thermal decomposition of biodiesel fuel

878

Mechanism and kinetics of thermal decomposition of carbonates

879

Mechanism and kinetics of thermal decomposition of zinc oxalate

880

Mechanism and kinetics of thin zirconium and hafnium oxide film growth in an ALD reactor

881

Mechanism and kinetics of transesterification in poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalene dicarboxylate) polymer blends

882

Mechanism and kinetics of wollastonite fibre dissolution in the aqueous solution of acetic acid

883

Mechanism and kinetics study on the OH-initiated oxidation of organophosphorus pesticide trichlorfon in atmosphere Original Research Article

884

Mechanism and life study on polyaniline anti-corrosion coating

885

Mechanism and Location of Atrial Flutter in Transplanted Hearts: Observations During Transient Entrainment From Distant Sites

886

Mechanism and main regularities of the alkaline pyrolysis of wood

887

Mechanism and management of treatment-related gonadal failure in recipients of high dose chemoradiotherapy

888

Mechanism and Mathematical Model of Heat and Mass Transfer During Convective Drying of Porous Materials

889

Mechanism and Mathematical Model of Heat and Mass Transfer During Convective Drying of Porous Materials

890

Mechanism and Mechanism-Based Inactivation of 4-Hydroxyphenylpyruvate Dioxygenase

891

Mechanism and microstructure of nickel-ceria composite coatings prepared by pulse current deposition under the ultrasonic field

892

Mechanism and mode of albitization of detrital feldspar in the Devonian Padeha Formation, Eastern Alborz, Iran

893

Mechanism and modeling of saw-tooth structure formation in the L12–L10 two-phase system Original Research Article

894

Mechanism and modeling of the formation of gaseous alkali sulfates

895

Mechanism and modelling of bamboo pyrolysis

896

Mechanism and molecular markers associated with rust resistance in a chickpea interspecific cross ( Cicer arietinum × Cicer reticulatum )

897

Mechanism and molecular weight model for thermal oxidation of linear ethylene–butene copolymer

898

Mechanism and NaOH effect of polymer-supported catalyst: phosphazene reaction

899

Mechanism and number of adducts of photo-addition of glycine methyl-ester to [60] fullerene

900

Mechanism and performance of a dry particle separator using an elastic drum

901

Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys

902

Mechanism and prediction analysis of sustained casing pressure in “A” annulus of CO2 injection well

903

Mechanism and prediction of bed agglomeration during fluidized bed combustion of a biomass fuel: Effect of the reactor scale

904

Mechanism and Prevention of Disintegration of AOD Stainless Steel Slag Original Research Article

905

Mechanism and product characterization from the electroreduction of heterodinuclear complexes [(C5Me5)ClM(μ-L)Re(CO)3X](PF6), M=Rh or Ir, L=2,2′-azobispyridine or 2,2′-azobis(5-chloropyrimidine), X=halide

906

Mechanism and rate of butyl phosphinate formation from reaction of phosphinic acid (Cyanex 272) and tributyl phosphate

907

Mechanism and rate of placental transfer of zalcitabine (2ʹ,3ʹ-dideoxycytidine) in Macaca nemestrina, , ,

908

Mechanism and relaxation kinetics of photo-induced valence tautomerism of [Co(phen)(3,5-DBSQ)2]·C6H5Cl

909

Mechanism and role of partitioning in removal of organics by RO and NF composite membranes Original Research Article

910

Mechanism and scope of salen bifunctional catalysts in asymmetric aldehyde and α-ketoester alkylation

911

Mechanism and selectivity of 2,3-dimethyl-2,3-diphenylbutane mediated addition of vinyltriethoxysilane to polyethylene

912

Mechanism and sequence of assembly and dispersal of supercontinents

913

Mechanism and Severity of Injury in Trauma Patients: A Three-Year Report of the Isfahan Trauma Registry

914

Mechanism and Severity of Mitral Regurgitation by Transesophageal Echocardiography in Patients Referred for Percutaneous Valve Repair

915

Mechanism and significance of mercury volatilization from contaminated floodplains of the German river Elbe

916

Mechanism and site requirements for NO oxidation on Pd catalysts

917

Mechanism and specificity of the terminal thioesterase domain from the erythromycin polyketide synthase Original Research Article

918

Mechanism and stoichiometry of 2,2-diphenyl-1-picrylhydrazyl radical scavenging by glutathione and its novel α-glutamyl derivative

919

Mechanism and structure–activity relationships of norspermidine-based peptidic inhibitors of trypanothione reductase Original Research Article

920

Mechanism and Substrate Recognition of Human Holo ACP Synthase Original Research Article

921

Mechanism and synthesis of pharmacologically active quinolones from Morita–Baylis–Hillman adducts

922

Mechanism and Thermodynamics of Guanidinium Chloride-induced Denaturation of ALS-associated Mutant Cu,Zn Superoxide Dismutases

923

Mechanism and timing of Pb transport from subducted oceanic crust and sediment to the mantle source of arc lavas

924

Mechanism based lumping of pyrolysis reactions: Lumping by reactive intermediates Original Research Article

925

Mechanism based protein crosslinking of domains from the 6-deoxyerythronolide B synthase

926

Mechanism based representation of the active site of 5α-reductase (5AR)

927

Mechanism behind the relation between shell structure and stability of heaviest nuclei Original Research Article

928

Mechanism by which a frictionally confined rod loses stability under initial velocity and position perturbations

929

Mechanism by which Alcohol and Wine Polyphenols Affect Coronary Heart Disease Risk

930

Mechanism by which avenanthramide-c, a polyphenol of oats, blocks cell cycle progression in vascular smooth muscle cells

931

Mechanism by which opening the mitochondrial ATP-sensitine potassium channel protects the ischemic heart

932

Mechanism by which quinapril improves vascular function in coronary artery disease

933

Mechanism by Which the Amyloid-like Fibrils of a β2-Microglobulin Fragment Are Induced by Fluorine-substituted Alcohols

934

Mechanism change in estimating of antioxidant activity of phenolic compounds

935

Mechanism Controlling Permeability Change in Clays due to Changes in Pore Fluid

936

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

937

Mechanism design and the role of enforcement in Freemanʹs model of payments

938

Mechanism Design and Village Economies: From Credit to Tenancy to Cropping Groups

939

Mechanism design for arbitrary type spaces

940

Mechanism design for coalition formation and cost sharing in group-buying markets

941

Mechanism design for policy routing

942

Mechanism design for the truthful elicitation of costly probabilistic estimates in distributed information systems Original Research Article

943

Mechanism Design under Alternative Information Structures and Constrained Capacity

944

Mechanism design with a liquidity constrained buyer: The 2×2 case

945

Mechanism design with multidimensional, continuous types and interdependent valuations

946

Mechanism design with side payments: Individual rationality and iterative dominance

947

Mechanism design with weaker incentive compatibility constraints

948

Mechanism Discrimination for Bimolecular Reactions: Revisited with a Practical Hydrogenation Case Study

949

Mechanism diversity in anodic oxidation of N,N-dimethyl-p-phenylenediamine by varying pH

950

Mechanism exploration of adsorption-immobilized enzymatic reactor using polymer-coated silica microbeads

951

Mechanism exploration of an ultrahigh strength steel by quenching–partitioning–tempering process

952

Mechanism for Activation of the EGF Receptor Catalytic Domain by the Juxtamembrane Segment

953

Mechanism for adsorption, dissociation and diffusion of hydrogen in hydrogen permeation barrier of α-Al2O3: A density functional theory study

954

Mechanism for Aerobic Oxidation of 3,5-Di-tert-butylcatechol to 3,5-Di-tert-butyl-o-benzoquinone Catalyzed by Di-(mu)hydroxo-dicopper(II) Complexes of Peralkylated Ethylelnediamine Ligands

955

Mechanism for Attenuation of DNA Binding by MarR Family Transcriptional Regulators by Small Molecule Ligands

956

Mechanism for catalytic hydrodenitrogenation of isoquinoline

957

Mechanism for catalytic partial oxidation of methane to syngas over a Ni/Al2O3 catalyst Original Research Article

958

Mechanism for CO oxidation catalyzed by Pd-substituted BaCeO3, and the local structure of the active sites

959

Mechanism for coarsening of P-mediated Ge quantum dots during in-situ annealing

960

Mechanism for compression set of TDI polyurethane foams

961

Mechanism for converting Al2O3-containing borate glass to hydroxyapatite in aqueous phosphate solution

962

Mechanism for covalence bond benzene dimers formation: A DFT and MP2 investigation

963

Mechanism for De Novo RNA Synthesis and Initiating Nucleotide Specificity by T7 RNA Polymerase

964

Mechanism for decomposition of aurichalcite—A controlled rate thermal analysis study

965

Mechanism for dimethylformamide-treatment of poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) layer to enhance short circuit current of polymer solar cells

966

Mechanism for di-π-methane rearrangements in nonconjugated systems

967

Mechanism for effective polarizability enhancement in molecular crystals: C60

968

Mechanism for electric charge separation by ejection of charged particles from an ice particle growing by riming

969

Mechanism for electrochemical hydrogen insertion in carbonaceous materials

970

Mechanism for entropy–enthalpy compensation in the fusion of organic molecules

971

Mechanism for fatigue striations as formed under variable negative R-ratio in Al-based structural alloys

972

Mechanism for fetal hemoglobin induction by hydroxyurea in sickle cell erythroid progenitors

973

Mechanism for formation of ovalbumin–fatty acid salt mixed gels

974

Mechanism for generating stagnant slabs in 3-D spherical mantle convection models at Earth-like conditions

975

Mechanism for giant Cl− and F− enhancements in electron-induced dissociation of CF2Cl2 coadsorbed with water or ammonia ices

976

Mechanism for giant electrooptic response of excitons in porphyrin J-aggregates: Molecular rearrangement model

977

Mechanism for hierarchical self-assembly of nanoparticles on scaffolds derived from block copolymers

978

Mechanism for high hydrogen storage capacity on metal-coated carbon nanotubes: A first principle analysis

979

Mechanism for High Stability of Liposomal Glucose Oxidase to Inhibitor Hydrogen Peroxide Produced in Prolonged Glucose Oxidation

980

Mechanism for IL-1β-mediated neovascularization unmasked by IL-1β knock-out mice

981

Mechanism for improving stereoselectivity for asymmetric reduction using acetone powder of microorganism

982

Mechanism for impulse conversion of water trees to electrical trees in XLPE

983

Mechanism for intramolecular proton transfer involving hypericin

984

Mechanism for linear and nonlinear optical effects in KBe2BO3F2 (KBBF) crystal

985

Mechanism for linear preferential attachment in growing networks

986

Mechanism for manganese enhancement of dopamine-induced oxidative DNA damage and neuronal cell death

987

Mechanism for NO Photooxidation over the Oxygen-Deficient TiO2 Powder under Visible Light Irradiation

988

Mechanism for nucleation and growth of electrochemical palladium deposition on an Au(111) electrode

989

Mechanism for OH-initiated photooxidation of naphthalene in the presence of O2 and NOx: A DFT study

990

Mechanism for performance of energetically modified cement versus corresponding blended cement

991

MECHANISM FOR POLLINATION IN AFRICAN YAM BEAN

992

Mechanism for protection of iron corrosion by an intrinsically electronic conducting polymer

993

Mechanism for putative link between atherosclerosis and viruses found

994

Mechanism for radiation damage resistance in yttrium oxide dispersion strengthened steels

995

Mechanism for reducing the viscosity of extra-heavy oil by aquathermolysis with an amphiphilic catalyst

996

Mechanism for serrated cathode dissolution in Cu/Sn/Cu interconnect under electron current stressing Original Research Article

997

Mechanism for SOFC anode degradation from hydrogen sulfide exposure

998

Mechanism for spin alignments in organic molecule-based ferrimagnetics

999

Mechanism for sulfur acquisition by the alkanesulfonate monooxygenase system

1000

Mechanism for the anomalous degradation of proton- or electron-irradiated silicon solar cells

بازگشت