Title List مقالات لاتين Microstructure and nonlinear electrical properties of ZnO-Pr6O11-CoO-Cr2O3-La2O3-based varistors Microstructure development, hardness, toughness and creep behaviour of pressureless sintered alumina/SiC micro–nanocomposites obtained by slip-casting

بر اساس عنوان

1

Microstructure and nonlinear electrical properties of ZnO-Pr6O11-CoO-Cr2O3-La2O3-based varistors

2

Microstructure and non-ohmic properties of ZPCCT-based ceramics

3

Microstructure and nutrient composition of hairless canary seed and its potential as a blending flour for food use

4

Microstructure and olfactory quality of apples de-hydrated by innovative technologies Original Research Article

5

Microstructure and on-line shear viscosity of PP/nano-CaCO3 composites prepared by twin-screw extruder

6

Microstructure and optical absorption of FeS2 films formed by sulfurizing precursive iron of various crystallite scales

7

Microstructure and optical absorption property of the Cu/SiO2 nano-films

8

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

9

Microstructure and optical characterizations of mechanosynthesized nanocrystalline (Ti0.9Si0.1)N

10

Microstructure and optical limiting properties of multicomponent inorganic gel-glasses: A focus on SiO2, TiO2 and PbO gel-glasses

11

Microstructure and optical properties of (Pb,Ca)TiO3 films grown on Si(1 0 0) substrates by a simple sol–gel process

12

Microstructure and optical properties of Al2O3/ZrO2 nano multilayer thin films prepared by pulsed laser deposition

13

Microstructure and optical properties of amorphous and crystalline PbZrO3 thin films grown on Si(100) substrates by a sol–gel process

14

Microstructure and optical properties of CdI2 doped silver vanadate glass-nanocomposites

15

Microstructure and optical properties of electrodeposited Al-doped ZnO nanosheets

16

Microstructure and optical properties of GaAs/SiO2 nanogranular films prepared by magnetron co-sputtering

17

Microstructure and optical properties of GaN films on sapphire substrates

18

Microstructure and optical properties of lustre glazes produced on a copper body

19

Microstructure and optical properties of MgO films synthesized by closed-field unbalanced magnetron sputtering with additional electron emission

20

Microstructure and optical properties of nanocrystalline GaN embedded in silica matrix

21

Microstructure and optical properties of nanocrystalline ZnO and ZnO:(Li or Al) thin films

22

Microstructure and optical properties of nanostructured silicon thin films and artificial dielectrics

23

Microstructure and optical properties of phase-change Ge–Sb–Te nanoparticles grown by pulsed-laser ablation

24

Microstructure and optical properties of sodium caseinate films containing oleic acid–beeswax mixtures

25

Microstructure and optical properties of transparent alumina Original Research Article

26

Microstructure and optical properties of zinc nitride films deposited by magnetron sputtering method

27

Microstructure and optical properties of ZnO/porous silicon nanocomposite films

28

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy

29

Microstructure and origin of faults in siliceous mudstone at the Horonobe Underground Research Laboratory site, Japan

30

Microstructure and osteoblast response of gradient bioceramic coating on titanium alloy fabricated by laser cladding

31

Microstructure and oxidation behavior of Al and Hf co-deposition coatings on nickel-based superalloys

32

Microstructure and oxidation behavior of Al + Si co-deposited coatings on nickel-based superalloys

33

Microstructure and oxidation behavior of in situ formed TaSi2–Si3N4 nanocomposite coating grown on Ta substrate

34

Microstructure and Oxidation Behavior of Mechanically Alloyed Nb-Based Multi-Phase Superalloy Original Research Article

35

Microstructure and Oxidation Behavior of Modified Aluminide Coating on Ni3Al-based Single Crystal Superalloy

36

Microstructure and oxidation behavior of Nb-based multi-phase alloys

37

Microstructure and oxidation behavior of Nb–Mo–Si–B alloys

38

Microstructure and oxidation behavior of NiCoCrAl/YSZ microlaminates produced by EB–PVD

39

Microstructure and oxidation behavior of Ti–6Al–2Zr–1Mo–1V-based alloys with Sc addition

40

Microstructure and oxidation behavior of Ti–Si–B alloys

41

Microstructure and oxidation behavior of Ti–Si–B alloys

42

Microstructure and oxidation behaviour of chromium–molybdenum silicides

43

Microstructure and oxidation behaviour of chromium–molybdenum silicides

44

Microstructure and oxidation behaviour of Euro IV diesel engine soot: a comparative study with synthetic model soot substances

45

Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo- ion implantation

46

Microstructure and oxidation of hot-dip aluminized titanium at high temperature

47

Microstructure and oxidation properties of 16Cr–5Al–ODS steel prepared by sol–gel and spark plasma sintering methods

48

Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process

49

Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating

50

Microstructure and oxidation resistance of C-AlPO4–mullite coating prepared by hydrothermal electrophoretic deposition for SiCC/C composites

51

Microstructure and oxidation resistance of carbon/silicon carbide composites infiltrated with chromium silicide

52

Microstructure and oxidation resistance of carbon/silicon carbide composites infiltrated with chromium silicide

53

Microstructure and oxidation resistance of cryomilled NiCrAlY coating by laser induction hybrid rapid cladding

54

Microstructure and oxidation resistance of Mo–Si and Mo–Si–Al alloy coatings prepared by electro-thermal explosion ultrahigh speed spraying

55

Microstructure and oxidation resistance of nanocrystalline 304 SS-Al coatings

56

Microstructure and oxygen permeability of a La0.6Sr0.4Fe0.9Ga0.1O3−δ membrane containing magnesia as dispersed second phase particles

57

Microstructure and percolation threshold characteristics of reactive sputtered Au–TiO2 granular composite films

58

Microstructure and performance in diffusion-welded joints of Fe3Al/Q235 carbon steel

59

Microstructure and performance of a cermet material heat-treated in nitrogen Original Research Article

60

Microstructure and performance of crumb rubber modified asphalt

61

Microstructure and performance of CVD κ-Al2O3 multilayers

62

Microstructure and performance of CVD κ-Al2O3 multilayers

63

Microstructure and performance of electroformed Cu/nano-SiC composite

64

Microstructure and performance of energetically modified cement (EMC) with high filler content

65

Microstructure and performance of fly ash micro-beads in cementitious material system

66

Microstructure and performance of micro-tubular solid oxide fuel cells made by aqueous electrophoretic deposition

67

Microstructure and performance of novel Ni anode for hollow fibre solid oxide fuel cells

68

Microstructure and performance of sludge-ceramisite concrete

69

Microstructure and permittivity of sintered BaTiO3: influence of particle surface chemistry in an aqueous medium

70

Microstructure and phase composition dependent tribological properties of TiC/a-C nanocomposite thin films

71

Microstructure and phase composition of mechanically alloyed and hot pressed Ti-Al alloys

72

Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74

73

Microstructure and phase composition of ZrO2–MgO structural ceramic after high-temperature deformation

74

Microstructure and phase constituents near the fusion zone of Fe3Al/Cr–Ni alloys joints produced by MAW

75

Microstructure and phase decomposition of quasi-crystal Zn60Mg30Y10 alloy

76

Microstructure and phase diagrams of polymer gels

77

Microstructure and phase equilibria in Ni–Al–Cr–Co alloys

78

Microstructure and phase equilibria in the Ni–Al–W system

79

Microstructure and phase evolution in laser rapid forming of a functionally graded Ti–Rene88DT alloy Original Research Article

80

Microstructure and phase evolution of alumina–spinel self-flowing refractory castables containing nano-alumina particles

81

Microstructure and phase morphology during thermochemical processing of α2-based titanium aluminide castings

82

Microstructure and phase morphology during thermochemical processing of α2-based titanium aluminide castings

83

Microstructure and phase morphology of wood derived biomorphous SiSiC-ceramics

84

MICROSTRUCTURE AND PHASE OF POLY(VINYLIDEN FLUORIDE) FILMS BY ELECTROPHORETIC DEPOSITION: EFFECT OF POLYMER DISPERSION STIRRING CONDITIONS

85

Microstructure and phase solubility extension in injection cast NiAl–28Cr–5.7Mo–0.3Hf alloy

86

Microstructure and phase stability in a Nb–Mo–Cr–Al–Si alloy

87

Microstructure and phase stability of TiAl–W ternary alloy

88

Microstructure and phase transformation behavior of doped nanostructured titania

89

Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear

90

Microstructure and phase transformation of wear resistant ductile iron grinding balls by continuous cooling process

91

Microstructure and phase transformation of zirconia-based ternary oxides for thermal barrier coating applications

92

Microstructure and phase transformations in a Ni50Mn29Ga16Gd5 alloy with a high transformation temperature

93

Microstructure and phase transformations in the AlN–Al2O3 pseudo-binary system

94

Microstructure and photoactivity of titania nanoparticles prepared in nonionic W/O microemulsions

95

Microstructure and photoactivity of titania nanoparticles prepared in nonionic W/O microemulsions

96

Microstructure and photocatalytic activity of APS coatings obtained from different TIO2 nanopowders

97

Microstructure and photocatalytic activity of natural rutile from China for oxidation of methylene blue in water

98

Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates

99

Microstructure and photocatalytic properties of nanostructured TiO2 and TiO2-Al coatings elaborated by HVOF spraying for the nitrogen oxides removal

100

Microstructure and photocatalytic properties of nanostructured TiO2 and TiO2–Al coatings elaborated by HVOF spraying for the nitrogen oxides removal

101

Microstructure and photocatalytic properties of WO3/TiO2 composite films by plasma electrolytic oxidation

102

Microstructure and photoluminescence properties of as-deposited and annealed Si-rich a-Si1−xCx:H films

103

Microstructure and photoluminescence properties of ZnO thin films grown by PLD on Si(1 1 1) substrates

104

Microstructure and photoluminescent properties of BaY2ZnO5:Tb3+ phosphors with addition of lithium carbonate

105

Microstructure and photoluminescent properties of Sr2SiO4:Eu3+ phosphors with various NH4Cl flux concentrations

106

Microstructure and photovoltaic properties of low temperature polycrystalline silicon solar cells fabricated by VHF-GD CVD using fluorinated gas

107

Microstructure and physical properties of arc ion plated TiAlN/Cu thin film

108

Microstructure and physical properties of laser Zn modified amorphous–nanocrystalline coating on a titanium alloy

109

Microstructure and physical properties of microbial cellulose produced during fermentation of black tea broth (Kombucha). II.

110

Microstructure and physical properties of sol gel derived SnO2:Sb thin films for optoelectronic applications

111

Microstructure and physical properties of some oxide eutectic composites processed by directional solidification Original Research Article

112

Microstructure and physico-chemical evaluation of nano-emulsion-based antimicrobial peptides embedded in bioactive packaging films

113

Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites

114

Microstructure and piezoelectric properties of Bi0.5(Na0.82K0.18)0.5TiO3−NaSbO3 ceramics Original Research Article

115

Microstructure and piezoelectric properties of CuO added (K, Na, Li)NbO3 lead-free piezoelectric ceramics

116

Microstructure and piezoelectric properties of CuO-doped 0.95(K0.5Na0.5)NbO3–0.05Li(Nb0.5Sb0.5)O3 lead-free ceramics

117

Microstructure and piezoelectric properties of PMS–PZT ceramics

118

Microstructure and piezoelectric properties of textured (Na0.84K0.16)0.5Bi0.5TiO3 lead-free ceramics

119

Microstructure and pitting corrosion in simulated heat-affected zones of duplex stainless steels

120

Microstructure and plastic deformation behavior of Ni3(Ti,X) (X = Nb,Al) single crystals with long-period geometrically closely packed crystal structures

121

Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying

122

Microstructure and pore structure of concrete mixed with superfine phosphorous slag and superplasticizer

123

Microstructure and porosity evolution during experimental carbonation of a natural peridotite

124

Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability

125

Microstructure and Precipitation Behavior in HAZ of V and Ti Microalloyed Steel Original Research Article

126

Microstructure and Precipitation Behavior in Heat Affected Zone of Nitrogen-Enhanced Microalloyed Steel Containing V and Ti Original Research Article

127

Microstructure and preferred orientation of Au–Sn alloy plated deposits

128

Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite

129

Microstructure and properties characterisation of the double layered glass–ceramic coating on near-α titanium alloy

130

Microstructure and properties development of copper during severe plastic deformation

131

Microstructure and properties evaluation of TiO2 ceramics with multi-oxides glass additions

132

Microstructure and properties of (SiC, TiB2)/B4C composites by reaction hot pressing

133

Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel

134

Microstructure and properties of 17-4PH steel plasma nitrocarburized with a carrier gas containing rare earth elements

135

Microstructure and properties of 3D needle-punched carbon/silicon carbide brake materials

136

Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding

137

Microstructure and properties of a creep-resistant, cast γ-titanium aluminide

138

Microstructure and properties of a creep-resistant, cast γ-titanium aluminide

139

Microstructure and properties of a Cu–Cr–Zr alloy

140

Microstructure and properties of a Cu–Ti–Co alloy

141

Microstructure and properties of a laser fabricated burn-resistant Ti alloy

142

Microstructure and properties of a low-carbon steel processed by equal-channel angular pressing

143

Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy

144

Microstructure and properties of a TiAl alloy prepared by mechanical milling and subsequent reactive sintering

145

Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing

146

Microstructure and properties of Ag/N dual ions implanted titanium

147

Microstructure and properties of Ag/SnO2 coatings prepared by cold spraying

148

Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys

149

Microstructure and Properties of Al0.5CoCrCuFeNiTix (x=0–2.0) High-Entropy Alloys

150

Microstructure and properties of Al2O3–TiC nanocomposites fabricated by spark plasma sintering from high-energy ball milled reactants

151

Microstructure and properties of AlB2-type WB2 thin films deposited by direct-current magnetron sputtering

152

Microstructure and properties of Al-based metal matrix composites reinforced by Al60Cu20Ti15Zr5 glassy particles by high pressure hot pressing consolidation

153

Microstructure and properties of AlCrFeCuNix (0.6 ≤ x ≤ 1.4) high-entropy alloys

154

Microstructure and properties of alendronate-loaded calcium phosphate cement

155

Microstructure and properties of an electroconductive SiC-based composite

156

Microstructure and properties of an oxide dispersion-strengthened iron aluminide

157

Microstructure and properties of an oxide dispersion-strengthened iron aluminide

158

Microstructure and properties of annealed IrO2 thin films prepared by pulsed laser deposition

159

Microstructure and properties of austenitic stainless steel reinforced with in situ TiC particulate

160

Microstructure and properties of borided 41Cr4 steel after laser surface modification with re-melting

161

Microstructure and properties of borocarburized 15CrNi6 steel after laser surface modification

162

Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in situ reaction/hot pressing method

163

Microstructure and properties of CaO–ZrO2–SiO2 glass–ceramics prepared by sintering

164

Microstructure and properties of carbon nanotube/zirconia composite

165

Microstructure and properties of cement mortars containing organo-modified reservoir sludge

166

Microstructure and properties of ceramic particulate reinforced metallic glassy matrix composites fabricated by spark plasma sintering

167

Microstructure and properties of ceramics and composites joined by plastic deformation

168

Microstructure and properties of Cf/SiC composites with thin SiCN layer as fiber-protecting coating

169

Microstructure and properties of Co-, Ni-, Zn-, Nb- and W-modified multiferroic BiFeO3 ceramics

170

Microstructure and properties of coatings with rare earth formed by DC-plasma jet surface metallurgy

171

Microstructure and Properties of Colloidal Silica Bonded Magnesite Castable Refractories

172

Microstructure and properties of composite polyetheretherketone/Bioglass® coatings deposited on Ti–6Al–7Nb alloy for medical applications

173

Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates

174

Microstructure and properties of continuously cast, lead-alloy strip for lead/acid battery grids

175

Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting

176

Microstructure and properties of Cr3C2-modified nickel-based alloy coating deposited by plasma transferred arc process

177

Microstructure and properties of Cu–1.0Cr–0.2Zr–0.03Fe alloy

178

Microstructure and properties of Cu–Al–Fe high-temperature shape memory alloys

179

Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms

180

Microstructure and properties of DC magnetron sputtered NiAl–Hf coatings

181

Microstructure and properties of diffusion bonded Ti–6Al–4V parts using brazing-assisted hot isostatic pressing

182

Microstructure and properties of duplex (Ti:N)-DLC/MAO coating on magnesium alloy

183

Microstructure and properties of ecoceramics/metal composites with interpenetrating networks

184

Microstructure and properties of electron beam welded joint of Ti–22Al–25Nb/TC11

185

Microstructure and properties of extruded rapidly solidified AlCr4.7Fe1.1Si0.3 (at.%) alloys

186

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

187

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

188

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

189

Microstructure and properties of Fe–C–Cr–Cu coating deposited by plasma transferred arc process

190

Microstructure and properties of fine-grained orthorhombic transformed Ti-25Al-10Nb-3V-1Mo (Super α2) Ti aluminide

191

Microstructure and properties of fine-grained orthorhombic transformed Ti-25Al-10Nb-3V-1Mo (Super α2) Ti aluminide

192

Microstructure and properties of fly ash-based geopolymeric material with 5A zeolite as a filler

193

Microstructure and properties of friction stir butt-welded AE42 magnesium alloy

194

Microstructure and properties of friction stir butt-welded AZ31 magnesium alloy

195

Microstructure and properties of friction stir welded high strength Fe–36 wt%Ni alloy

196

Microstructure and properties of glycerol plasticized soy protein plastics containing castor oil Original Research Article

197

Microstructure and properties of hercynite–magnesia–calcium zirconate refractory mixtures

198

Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder

199

Microstructure and properties of high chrome steel roller after laser surface melting

200

Microstructure and properties of highly filled rubber/clay nanocomposites prepared by melt blending

201

Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting

202

Microstructure and properties of hot extruded Cu–1 wt% Al2O3 nano-composites synthesized by various techniques

203

Microstructure and Properties of Hot Rolled Ti-23Al-17Nb Alloy Sheets Original Research Article

204

Microstructure and Properties of Hot Working Die Steel H13MOD Original Research Article

205

Microstructure and properties of HVOF-sprayed chromium alloyed WC–Co and WC–Ni coatings

206

Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites

207

Microstructure and properties of in situ nanometric Al2O3 reinforced α-Fe(Al)–Fe3Al-based composites

208

Microstructure and properties of indium tin oxide films produced by electrostatic spray assisted vapour deposition process

209

Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures

210

Microstructure and Properties of La0.7Sr0.3MnO3 Films Deposited on LaAlO3(100), (110), and (111) Substrates

211

Microstructure and properties of laser clad coatings studied by orientation imaging microscopy Original Research Article

212

Microstructure and properties of laser clad TiC+NiCrBSi+rare earth composite coatings

213

Microstructure and properties of laser clad Zr-based alloy coatings on Ti substrates

214

Microstructure and properties of laser treated arc sprayed and plasma sprayed coatings

215

Microstructure and properties of laser-borided Inconel 600-alloy

216

Microstructure and properties of laser-clad high-temperature wear-resistant alloys 1

217

Microstructure and properties of layers on chromium steel

218

Microstructure and properties of lead-free (Bi1/2Na1/2)TiO3 based piezoelectric ceramics doped with different cations

219

Microstructure and properties of low friction TiCC nanocomposite coatings deposited by magnetron sputtering

220

Microstructure and properties of low manganese and niobium containing HIC pipeline steel

221

Microstructure and properties of LZSA glass-ceramic foams

222

Microstructure and properties of magnesium AZ31B–aluminum 7075 explosively welded composite plate

223

Microstructure and properties of manganese dioxide films prepared by electrodeposition

224

Microstructure and Properties of Mg-10% Al-(0 ∼ 3%) Di Alloys

225

Microstructure and properties of Mg–3Sn–1Mn (wt%) alloy processed by a novel continuous shearing and rolling and heat treatment

226

Microstructure and properties of Mg–5.21Li–3.44Zn–0.32Y–0.01Zr alloy

227

Microstructure and properties of Mg–5.6%Sn–4.4%Zn–2.1%Al alloy

228

Microstructure and properties of Mg–Zn ferrite as a result of sintering temperature

229

Microstructure and Properties of Mo Microalloyed Cold Rolled DP1000 Steels Original Research Article

230

Microstructure and properties of monazite (LaPO4) coated saphikon fiber/alumina matrix composites

231

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

232

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

233

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

234

Microstructure and properties of nano-Al2O3 particle reinforced Ni–Cr–Mo–Cu composite alloying layer

235

Microstructure and properties of nanocrystalline copper–niobium alloy with high strength and high conductivity

236

Microstructure and properties of nanocrystalline Fe–Zr–Nb–B soft magnetic alloys with low magnetostriction Original Research Article

237

Microstructure and properties of nanocrystalline titanium monoxide films synthesized by inductively coupled plasma assisted reactive direct current magnetron sputtering

238

Microstructure and properties of nanostructured Cu28 wt%Ag microcomposite deformed after solidifying under a high magnetic field

239

Microstructure and properties of nickel prepared by electrolyte vacuum boiling electrodeposition

240

Microstructure and properties of Ni–Co/nano-Al2O3 composite coatings by pulse reversal current electrodeposition

241

Microstructure and properties of novel wear and corrosion resistant CrON/NbON nano-scale multilayer coatings

242

Microstructure and properties of organosoluble polyimide/silica hybrid films

243

Microstructure and properties of oxygen controlled melt textured NdBaCuO superconductive ceramics

244

Microstructure and properties of oxygen controlled melt textured NdBaCuO superconductive ceramics

245

Microstructure and properties of particle reinforced silicon carbide and silicon nitride ceramic matrix composites prepared by chemical vapor infiltration

246

Microstructure and properties of Pb(Mg1/3Nb2/3)O3–Portland cement composites

247

Microstructure and properties of Pb(Mg1/3Nb2/3)O3–Portland cement composites

248

Microstructure and properties of pipeline steel with a ferrite/martensite dual-phase microstructure

249

Microstructure and Properties of Plasma Spraying Boron Carbide Coating

250

Microstructure and properties of plasma-sprayed bio-coatings on a low-modulus titanium alloy from milled HA/Ti powders

251

Microstructure and properties of poly(vinyl alcohol-co-vinyl acetate)-g-ε-caprolactone

252

Microstructure and properties of polyamideimide/silica hybrids compatibilized with 3-aminopropyltriethoxysilane

253

Microstructure and properties of polyester-based polyurethane/titania hybrid films prepared by sol–gel process

254

Microstructure and properties of polyimide/poly(vinylsilsesquioxane) hybrid composite films

255

Microstructure and properties of polypropylene composites filled with co-incorporation of MCM-41(with template) and OMMT nanoparticles prepared by melt-compounding

256

Microstructure and properties of polypropylene composites filled with silver and carbon nanotube nanoparticles prepared by melt-compounding

257

Microstructure and properties of pore-created SiC ceramics with calcium chloride as pore former

258

Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process

259

Microstructure and properties of porous silicon nitride ceramics prepared by gel-casting and gas pressure sintering

260

Microstructure and properties of porous β-SiC templated from soft woods

261

Microstructure and properties of pure Ti processed by ECAP and cold extrusion

262

Microstructure and properties of pure Ti processed by ECAP and cold extrusion

263

Microstructure and properties of PZT53/47 thick films derived from sols with submicron-sized PZT particle

264

Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate

265

Microstructure and properties of SA 106B carbon steel after treatment of the melt with nano-sized TiC particles

266

Microstructure and properties of self-reinforced α-sialon ceramics doped with Lu2O3

267

Microstructure and properties of Sip/Al–Si surface composites prepared by ultrasonic method

268

Microstructure and properties of Sm-substituted BiFeO3 ceramics

269

Microstructure and properties of solvent-resistant fluorine-contained thermoplastic vulcanizates prepared through dynamic vulcanization

270

Microstructure and properties of spark plasma sintered AlN ceramics

271

Microstructure and properties of spark plasma sintered Fe–Cr–Mo–Y–B–C bulk metallic glass

272

Microstructure and properties of spray formed Cr12MoV steel for rolls

273

Microstructure and Properties of Superplastic Welding between 40Cr and CrWMn Steels

274

Microstructure and properties of the compound layer obtained by pulsed plasma nitriding in steel gears

275

Microstructure and properties of the high-nitrogen Fe–Cr austenite

276

Microstructure and properties of the high-nitrogen Fe–Cr austenite

277

Microstructure and properties of the new Pt–Rh based alloys for high-temperature applications

278

Microstructure and properties of the sintered composites from zeolite 4A and magnesium oxide

279

Microstructure and properties of the Ti(C,N)–xMo2C–Ni cermet/steel joint by a novel diffusion bonding method

280

Microstructure and properties of the TiC/Fe-based alloy hardfacing layers

281

Microstructure and properties of thin wall by laser cladding forming

282

Microstructure and Properties of Ti and Ti+Nb Ultra-Low-Carbon Bake Hardened Steels Original Research Article

283

Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process Original Research Article

284

Microstructure and properties of Ti3SiC2/SiC nanocomposites fabricated by spark plasma sintering

285

Microstructure and properties of Ti-48Al-2Cr after thermomechanical treatment

286

Microstructure and properties of Ti-48Al-2Cr after thermomechanical treatment

287

Microstructure and properties of TiB2-containing coatings prepared by arc spraying

288

Microstructure and properties of TiC–Fe cermet coatings by reactive flame spraying using asphalt as carbonaceous precursor

289

Microstructure and properties of TiC–Fe36Ni cermet coatings by reactive plasma spraying using sucrose as carbonaceous precursor

290

Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process

291

Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process

292

Microstructure and properties of titanium aluminides on Ti6Al4V titanium alloy produced by chemical vapor deposition method

293

Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming

294

Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming

295

Microstructure and properties of translucent Mg–sialon ceramics prepared by spark plasma sintering

296

Microstructure and properties of tungsten–samarium oxide composite prepared by a novel wet chemical method and spark plasma sintering

297

Microstructure and properties of ultrafine cemented carbides—Differences in spark plasma sintering and sinter-HIP

298

Microstructure and properties of ultra-fine grain Cu–Cr alloy prepared by equal-channel angular pressing

299

Microstructure and properties of ultra-fine TiC0.7N0.3 cermet

300

Microstructure and properties of ultrafine-grained and dispersion-strengthened titanium materials for implants

301

Microstructure and properties of various fluorine-containing SiAlON ceramics synthesized by HIPing

302

Microstructure and properties of WC–Co coatings, modified by sub-microcrystalline carbides, obtained by different methods of high velocity spray processes

303

Microstructure and properties of zirconia-based nanocomposites derived from a powder containing TiC crystallised in situ and carbon

304

Microstructure and properties of Zr65Al10Ni10Cu15 amorphous plates rolled in the supercooled liquid region

305

Microstructure and properties of Zr65Al10Ni10Cu15 amorphous plates rolled in the supercooled liquid region

306

Microstructure and properties of ZrB2–SiC composites prepared by spark plasma sintering using TaSi2 as sintering additive

307

Microstructure and properties stability of Al-alloyed MoSi2 matrix composites

308

Microstructure and property analysis of DC magnetron sputtered NiAl–0.6Hf coatings

309

Microstructure and property changes induced by substrate rotation in titanium/silicon dual-doped a-C:H films deposited by mid-frequency magnetron sputtering

310

Microstructure and property evaluation of barium aluminosilicate glass–ceramic sealant for anode-supported solid oxide fuel cell

311

Microstructure and property evolution during the sintering of stainless steel alloy with Si3N4

312

Microstructure and property investigation of paste boronized pure nickel and Nimonic 90 superalloy

313

Microstructure and property measurements on in situ TiB2/70Si–Al composite for electronic packaging applications

314

Microstructure and property modifications in a near α Ti alloy induced by pulsed electron beam surface treatment

315

Microstructure and property of a functionally graded aluminum silicon alloy fabricated by semi-solid backward extrusion process

316

Microstructure and property of Fe–Co–B–Si–C–Nb amorphous composite coating fabricated by laser cladding process

317

Microstructure and Property of HD Die Steel With Unsmoothed Surface With Various Laser Parameters Original Research Article

318

Microstructure and property of micro-plasma-sprayed Cu coating

319

Microstructure and property of micro-plasma-sprayed Cu coating

320

Microstructure and property of nitrogen-alloyed high manganese austenitic steel under high strain rate tension

321

Microstructure and property of SiC coating for carbon materials

322

Microstructure and property of the composite laminate cladded by explosive welding of CuAlMn shape memory alloy and QBe2 alloy

323

Microstructure and property relationships in hipped Stellite powders

324

Microstructure and property relationships in hipped Stellite powders

325

Microstructure and reaction mechanism of SiC ceramic with mullite-zircon as a new liquid-phase sintering additives system

326

Microstructure and reaction phases in Si3N4/Si3N4 joint brazed with Cu–Pd–Ti filler alloy

327

Microstructure and reactivity effects on the performance of Nd2NiO4+δ oxygen electrode on Ce0.9Gd0.1O1.95 electrolyte

328

Microstructure and reactivity of rich husk ash

329

Microstructure and refractory properties of spinel containing castables

330

Microstructure and relaxor ferroelectric properties of Bi2O3-doped strontium barium niobate ceramics

331

Microstructure and residual stress distribution of similar and dissimilar electron beam welds – Maraging steel to medium alloy medium carbon steel

332

Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling

333

Microstructure and residual stresses in surface layer of simultaneously laser alloyed and burnished steel

334

Microstructure and Resisting Thermal Shock Behaviors of TiC-Al2O3/Fe Functionally Graded Materials Prepared by SHS/PHIP

335

Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al–Si slurries Original Research Article

336

Microstructure and rheological behavior of hypereutectic semi-solid Al–Si alloy under low shear rates compression test

337

Microstructure and rheological behaviour of alginate/pectin mixed gels

338

Microstructure and rheological behaviour of electrosterically stabilized silica particle suspensions

339

Microstructure and rheological properties of pH-responsive core–shell particles

340

Microstructure and rheological properties of psyllium polysaccharide gel

341

Microstructure and rheological properties of thermo-responsive poly(N-isopropylacrylamide) microgels

342

Microstructure and rheology of an AA2024 aluminium alloy in the semi-solid state, and mechanical properties of a back-extruded part

343

Microstructure and rheology of an acid-coagulated cheese (Karish) made with an exopolysaccharide-producing Streptococcus thermophilus strain and its exopolysaccharide non-producing genetic variant

344

Microstructure and rheology of phase-separated gels of gelatin + oxidized starch

345

Microstructure and rheology of stimuli-responsive microgel systems—effect of cross-linked density

346

Microstructure and rheology of β-lactoglobulin–galactomannan aqueous mixtures

347

Microstructure and rolling capability of modified AZ31–Ce–Gd alloys

348

Microstructure and room temperature deformation of Nbss/Nb5Si3 in situ composites alloyed with Mo

349

Microstructure and room temperature fracture toughness of directionally solidified NiAl–Mo eutectic in situ composites

350

Microstructure and room temperature fracture toughness of Nbss/Nb5Si3 in situ composites

351

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

352

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

353

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

354

Microstructure and room temperature mechanical properties of mullite fibers after heat-treatment at elevated temperatures

355

Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles Original Research Article

356

Microstructure and room-temperature fracture toughness of directionally solidified Nb–Si–Ti–Cr–Al–Hf alloy

357

Microstructure and room-temperature mechanical properties of Fe30Ni20Mn35Al15

358

Microstructure and room-temperature mechanical properties of β sialon/SiC nanocomposites

359

Microstructure and roughness of photopolymerized poly(ethylene glycol) diacrylate hydrogel as measured by atomic force microscopy in amplitude and frequency modulation mode

360

Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface treatment

361

Microstructure and self-sharpening of the magnetite cap in chiton tooth

362

Microstructure and self-solidification/stabilization (S/S) of heavy metals of nano-modified CFA–MSWIFA composite geopolymers

363

Microstructure and sensory properties of high pressure processed dressings stabilized by different whey proteins

364

Microstructure and shape memory behavior of annealed Ti–36.8 at.% Ni–11.6 at.% Cu thin film

365

Microstructure and shape memory behavior of Ti51.2(Pd27.0Ni21.8) and Ti49.5(Pd28.5Ni22.0) thin films

366

Microstructure and shape memory behavior of Ti51.2(Pd27.0Ni21.8) and Ti49.5(Pd28.5Ni22.0) thin films

367

Microstructure and shape memory effect of Ti–20Zr–10Nb alloy

368

Microstructure and shape memory properties of Fe–15Mn–5Si–9Cr–5Ni melt-spun ribbons

369

Microstructure and shape-memory characteristics of Ni56Mn25−xCoxGa19 (x = 4, 8) high-temperature shape-memory alloys

370

Microstructure and shear fracture characteristics of porous anodic TiO2 layer before and after hot water treatment

371

Microstructure and shear strength of a Au–In microjoint

372

Microstructure and shear strength of a Cu–Ta interface

373

Microstructure and shear strength of sintered Cu–Al2O3 composite joined to Cu using Ag–Cu and Cu–Zn filler alloys

374

Microstructure and silver nanoparticles in ion-exchanged and deformed soda-lime silicate glasses

375

Microstructure and size effects in Pt/C and Pt3Ni/C electrocatalysts synthesized in solutions based on binary organic solvents Original Research Article

376

Microstructure and sliding wear behavior of AA6360/(TiC + B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate

377

Microstructure and sliding wear behavior of nanostructured Ni60–TiB2 composite coating sprayed by HVOF technique

378

Microstructure and sliding wear behavior of pure titanium surface modified by double-glow plasma surface alloying with Nb

379

Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding

380

Microstructure and sliding wear resistance of an Al–12 wt.% Si/TiC laser clad coating

381

Microstructure and solidification behavior of Cu–Ni–Si alloys

382

Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel

383

Microstructure and some dynamic performances of hydrogen storage electrode alloys

384

Microstructure and some magnetic properties of amorphous and nanocrystalline Fe–Cu–Nb–Si–B alloys

385

Microstructure and some magnetic properties of amorphous and nanocrystalline Fe–Cu–Nb–Si–B alloys

386

Microstructure and some magnetic properties of annealed Vitrovac® 6025X amorphous ribbons

387

Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting

388

Microstructure and sound absorption of snow

389

Microstructure and spin polarization of quaternary Co2Cr1−xVxAl, Co2V1−xFexAl and Co2Cr1−xFexAl Heusler alloys Original Research Article

390

Microstructure and Stability of Fe73.5Cu1Nb3Si13.5B9 Alloy at Different Stages of Phase Transformation

391

Microstructure and stability of medieval glass bracelets from Drastar Castle, Bulgaria (11th–13th cent. AD): Four case studies

392

Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining

393

Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining Original Research Article

394

Microstructure and strain distribution in freestanding Si membrane strained by SixNy deposition

395

Microstructure and strength of B2-ordered NiAl containing L21-Ni2AlHf precipitates

396

Microstructure and strength of B2-ordered NiAl containing L21-Ni2AlHf precipitates

397

Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb3Al base alloys

398

Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb3Al base alloys

399

Microstructure and strength of brazed joints of Ti3Al-base alloy with different filler metals

400

Microstructure and strength of brazed joints of Ti3Al-base alloy with NiCrSiB

401

Microstructure and strength of brazed joints of Ti3Al-base alloy with TiZrNiCu filler metal

402

Microstructure and strength of brazed joints of Ti3Al-base alloy with TiZrNiCu filler metal

403

Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains Original Research Article

404

Microstructure and strength of Cu–Fe–Ag in situ composites

405

Microstructure and strength of diffusion-bonded joints of TiAl base alloy to steel

406

Microstructure and strength of friction-welded Fe–28Al and 316 L stainless steel

407

Microstructure and strength of needle coke modified ceramic casting molds

408

Microstructure and strength of nickel at large strains Original Research Article

409

Microstructure and strength of pure Cu with large grains processed by equal channel angular pressing

410

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

411

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

412

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

413

Microstructure and strength of severely deformed fcc metals

414

Microstructure and strengthening mechanism of a thermomechanically treated Mg–10Gd–3Y–1Sn–0.5Zr alloy

415

Microstructure and strengthening mechanism of carbon nanotubes reinforced magnesium matrix composite

416

Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire Original Research Article

417

Microstructure and strengthening mechanisms in Cu/Fe multilayers Original Research Article

418

Microstructure and strengthening of metal matrix composites

419

Microstructure and strengthening of metal matrix composites

420

Microstructure and stress development in magnetron sputtered TiAlCr(N) films

421

Microstructure and stress rupture property of titanium-containing 11Cr ferritic/martensitic steels

422

Microstructure and stresses in a keatite solid–solution glass–ceramic

423

Microstructure and Stress-Rupture Life of Polycrystal, Directionally Solidified, and Single Crystal Castings of Nickel-Based IN 939 Superalloy

424

Microstructure and stress—strain responses of AlMgSi alloy matrix composites reinforced with 10 vol.% Al2O3 particulates

425

Microstructure and stress—strain responses of AlMgSi alloy matrix composites reinforced with 10 vol.% Al2O3 particulates

426

Microstructure and structural behavior of ion-nitrided AISI 8620 steel

427

Microstructure and structural fatigue of ultra-fine grained NiTi-stents

428

Microstructure and structure characteristics of cubic WNx compounds

429

Microstructure and structure characteristics of cubic WNx compounds

430

Microstructure and structure of NiO–SnO2 and Fe2O3–SnO2 systems

431

Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy

432

Microstructure and superconductivity of MgB2 single crystals

433

Microstructure and superconductivity of V-based Laves-phase superconductor tape synthesized by a rapidly-heating/quenching process

434

Microstructure and superelasticity of in situ synthesized (TiB + La2O3)/Ti-alloy composites with different mass fraction of LaB6

435

Microstructure and superior mechanical properties of cast Mg–12Gd–2Y–0.5Sm–0.5Sb–0.5Zr alloy

436

Microstructure and superplastic behavior of TiO2-doped Al2O3–ZrO2 (3Y) composite ceramics

437

Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy

438

Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy

439

Microstructure and superplasticity of laser welded Ti–6Al–4V alloy

440

Microstructure and superplasticity of Mg–Al–Ca electromagnetic casting alloys after hot extrusion

441

Microstructure and superplasticity of TA15 alloy

442

Microstructure and surface characteristics of hydroxyapatite coating on titanium and Ti-30Nb-1Fe-1Hf alloy by anodic oxidation and hydrothermal treatment

443

Micro-structure and surface layer properties of 18CrNiMo7-6 steel after multistep shot peening

444

Microstructure and surface mechanical properties of electrodeposited Ni coating on Al 2014 alloy

445

Microstructure and surface mechanical properties of pulse electrodeposited nickel

446

Microstructure and surface morphology of YSZ thin films deposited by e-beam technique

447

Microstructure- and surface orientation-dependent mechanical behaviors of Ag nanowires under bending

448

Microstructure and surface plasmon absorption of sol-gel-prepared Au nanoclusters in TiO2 thin films

449

Microstructure and surface properties of chromium-doped diamond-like carbon thin films fabricated by high power pulsed magnetron sputtering

450

Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium

451

Microstructure and surface properties of lignocellulosic-based activated carbons

452

Microstructure and surface wear resistance in rapidly quenched Fe–Cr–B alloy spray coatings

453

Microstructure and technological properties of porcelain stoneware tiles moulded at different pressures and thicknesses

454

Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

455

Microstructure and temperature dependence of properties of morphotropic phase boundary Bi(Mg1/2Ti1/2)O3-PbTiO3 piezoceramics processed by conventional routes

456

Microstructure and temperature-dependent magnetic properties of Co/Pt multilayered nanowires

457

Microstructure and tensile behavior of a friction stir processed magnesium alloy Original Research Article

458

Microstructure and tensile behavior of Cu–Al multi-layered composites prepared by plasma activated sintering

459

Microstructure and tensile behavior of Fe–16Al-based alloy after severe plastic deformation

460

Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltration

461

Microstructure and tensile behavior of novel laminated Ti–TiBw/Ti composites by reaction hot pressing

462

Microstructure and tensile behavior of Sn–5Sb lead-free solder alloy containing Bi and Cu

463

Microstructure and tensile behaviour of cold-rolled TRIP-aided steels

464

Microstructure and tensile creep behavior of Mg–4Al based magnesium alloys with alkaline-earth elements Sr and Ca additions

465

Microstructure and tensile deformation of nanocrystalline Cu produced by pulse electrodeposition

466

Microstructure and tensile properties after thermohydrogen processing of Ti–6Al–4V

467

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

468

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

469

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

470

Microstructure and tensile properties of 45WCrV7 tool steel after deep cryogenic treatment

471

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

472

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

473

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

474

Microstructure and tensile properties of a continuous-cast Al–Li–Hf alloy

475

Microstructure and tensile properties of Al–Mn alloy processed by accumulative roll bonding

476

Microstructure and tensile properties of as-cast and as-aged Mg–6Al–4Zn alloys with Sn addition

477

Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp composites prepared by cryomilling

478

Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling

479

Microstructure and tensile properties of cast Al–15%Mg2Si composite: Effects of phosphorous addition and heat treatment

480

Microstructure and tensile properties of cast Ti-44Al-4Nb-4Hf-0.1Si-0.1B alloy with refined lamellar microstructures

481

Microstructure and tensile properties of consolidated magnesium chips

482

Microstructure and tensile properties of FeMnNiCuCoSnx high entropy alloys

483

Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy

484

Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6

485

Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steels

486

Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steels

487

Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites Original Research Article

488

Microstructure and tensile properties of hot-rolled Zr50–Ti50 binary alloy

489

Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique

490

Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique

491

Microstructure and tensile properties of in situ synthesized (TiB+Y2O3)/Ti composites at elevated temperature

492

Microstructure and tensile properties of in situ synthesized (TiB+Y2O3)/Ti composites at elevated temperature

493

Microstructure and tensile properties of in situ synthesized (TiC + TiB + Nd2O3)/Ti-alloy composites at elevated temperature

494

Microstructure and tensile properties of in situ TiCp/Al–4.5 wt.% Cu composites obtained by direct reaction synthesis

495

Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds

496

Microstructure and tensile properties of laser beam welded Ti–22Al–27Nb alloys

497

Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy

498

Microstructure and Tensile properties of Laser Welded Joints between DP590 Steel and Plain Low Carbon Steel

499

Microstructure and tensile properties of mechanically alloyed Ti–6A1–4V with boron additions

500

Microstructure and tensile properties of mechanically alloyed Ti–6A1–4V with boron additions

501

Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration

502

Microstructure and tensile properties of nanostructured Cu-25wt%Ag Original Research Article

503

Microstructure and tensile properties of nickel-based superalloy K417G bonded using transient liquid-phase infiltration

504

Microstructure and tensile properties of orthorhombic Ti–Al–Nb–Ta alloys

505

Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V

506

Microstructure and tensile properties of Si3N4p/2024Al composite fabricated by pressure infiltration method

507

Microstructure and tensile properties of Sn–1Cu lead-free solder alloy produced by directional solidification

508

Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting

509

Microstructure and tensile properties of thixoformed A356 alloy

510

Microstructure and tensile properties of Ti–6Al–4V–0.1B alloys of direct rolling in the near β phase region

511

Microstructure and tensile properties of Y2O3-dispersed titanium produced by arc melting

512

Microstructure and tensile properties of ZnO-coated magnesium borate whisker reinforced AZ31B composite

513

Microstructure and tensile property characterization of a nickel-containing zinc-based alloy: effects of heat treatment and test conditions

514

Microstructure and tensile property characterization of a nickel-containing zinc-based alloy: effects of heat treatment and test conditions

515

Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure aluminium

516

Microstructure and textural properties of Kareish cheese manufactured by various ways

517

Microstructure and texture analysis of YBCO thick film with peritectic growth on unoriented silver substrate

518

Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles

519

Microstructure and texture development in hydrostatically extruded Mg–Al–Zn alloys during tensile testing at intermediate temperatures Original Research Article

520

Microstructure and texture development in Ti50Ni25Cu25 melt-spun ribbon Original Research Article

521

Microstructure and texture evolution after twin roll casting and subsequent cold rolling of Al–Mg–Mn aluminium alloys

522

Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086

523

Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure Original Research Article

524

Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel Original Research Article

525

Microstructure and texture evolution during cold rolling and annealing of Ni3Fe alloy

526

Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling

527

Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route Original Research Article

528

Microstructure and texture evolution during hot rolling and subsequent annealing of Mg–1Gd alloy

529

Microstructure and texture evolution during solidification processing of Ti–6Al–4V

530

Microstructure and texture evolution during the drawing of tungsten wires

531

Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB)

532

Microstructure and texture evolution during β extrusion of boron modified Ti–6Al–4V alloy

533

Microstructure and texture evolution for dynamic plastic deformed pure magnesium during isothermal annealing

534

Microstructure and texture evolution in 21Mn–2.5Si–1.6Al–Ti steel subjected to dynamic impact loading

535

Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension Original Research Article

536

Microstructure and texture evolution in dual-phase steels: Competition between recovery, recrystallization, and phase transformation

537

Microstructure and texture evolution in ECAE processed A5056

538

Microstructure and texture evolution in ECAE processed A5056

539

Microstructure and texture evolution in the tension of superplastic Al-6Cu-0.4Zr

540

Microstructure and texture evolution in the tension of superplastic Al–6Cu–0.4Zr Original Research Article

541

Microstructure and texture evolution of a near-α titanium alloy during hot deformation

542

Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion

543

Microstructure and texture evolution of commercial pure titanium deformed at elevated temperatures

544

Microstructure and texture evolution of copper processed by differential speed rolling with various speed asymmetry coefficient

545

Microstructure and texture evolution of Cu–Nb composite wires

546

Microstructure and texture evolution of Mg3Zn3Ce magnesium alloys sheets and associated restoration mechanisms during annealing

547

Microstructure and texture formation in extruded lead sulfide (galena)

548

Microstructure and texture gradient in copper deformed by equal channel angular pressing Original Research Article

549

Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique

550

Microstructure and texture of cementitious porous materials

551

Microstructure and texture of coarse-grained Mg–Gd–Y–Nd–Zr alloy after hot compression

552

Microstructure and texture of duplex stainless steel after melt-spinning processing

553

Microstructure and texture of EB-PVD TBCs grown under different rotation modes

554

Microstructure and texture of EB-PVD TBCs grown under different rotation modes

555

Microstructure and texture of hydrated cement-based materials: A proton field cycling relaxometry approach

556

Microstructure and texture of Nb + Ti stabilized ferritic stainless steel

557

Microstructure and texture of pitch-based ribbon fibers for thermal management Original Research Article

558

Microstructure and texture of rolled and annealed β titanium alloy Ti–10V–4.5Fe–1.5Al

559

Microstructure and texture of rolled and annealed β titanium alloy Ti–10V–4.5Fe–1.5Al

560

Microstructure and texture of twin-roll cast Mg–3Al–1Zn–0.2Mn magnesium alloy

561

Microstructure and texture studies on twin-roll cast AZ31 (Mg–3 wt.%Al–1 wt.%Zn) alloy and the effect of thermomechanical processing

562

Microstructure and the development of fatigue cracks at notches

563

Microstructure and the development of fatigue cracks at notches

564

Microstructure and the dielectric properties of SiCN–Si3N4 ceramics fabricated via LPCVD/CVI

565

Microstructure and the properties of FeCoCuNiSnx high entropy alloys

566

Microstructure and the wear mechanism of grain-refined aluminum during dry sliding against steel disc

567

Microstructure and thermal change of texture of calcite crystals in ostrich eggshell Struthio camelus

568

Microstructure and thermal conductivity of Mo–TiC cermets processed by hot isostatic pressing

569

Microstructure and thermal conductivity of porous ZrO2 ceramics Original Research Article

570

Microstructure and thermal conductivity of spark plasma sintering AlN ceramics

571

Microstructure and thermal conductivity of surfactant-free NiO nanostructures

572

Microstructure and thermal cycle resistance of plasma sprayed mullite coatings made from secondary mullitized natural andalusite powder

573

Microstructure and thermal cyclic performance of laser-glazed plasma-sprayed ceria–yttria-stabilized zirconia thermal barrier coatings

574

Microstructure and thermal cycling behavior of nanostructured yttria partially stabilized zirconia (YSZ) thermal barrier coatings

575

Microstructure and Thermal Diffusivity of Ceramic Powders

576

Microstructure and thermal expansion of Al2TiO5–MgTi2O5 solid solutions obtained by reaction sintering

577

Microstructure and thermal oxidation behavior of yttria-stabilized hafnia nanostructured coatings deposited on alumina

578

Microstructure and thermal properties of copper matrix composites reinforced by chromium-coated discontinuous graphite fibers

579

Microstructure and thermal properties of diamond/aluminum composites with TiC coating on diamond particles

580

Microstructure and thermal properties of dysprosium and thulium co-doped barium titanate ceramics for high performance multilayer ceramic capacitors

581

Microstructure and thermal properties of the GeS2–In2S3–CsI glassy system

582

Microstructure and thermal property of tungsten coatings prepared by vacuum plasma spraying technology

583

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

584

Microstructure and thermal shock property of liquid phase sintered Cf/SiC composites

585

Microstructure and thermal stabilities in various atmospheres of SiB0.5C1.5N0.5 nano-sized powders fabricated by mechanical alloying technique

586

Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating

587

Microstructure and thermal stability of MoSi2–CoNiCrAlY nanocomposite feedstock prepared by high energy ball milling

588

Microstructure and thermal stability of nickel layers electrodeposited from an additive-free sulphamate-based electrolyte

589

Microstructure and thermal stability of ultra fine grained Mg-based alloys prepared by high-pressure torsion

590

Microstructure and thermal stability of superplastic aluminium—lithium alloy after severe plastic deformation

591

Microstructure and thermal/mechanical properties of short carbon fiber-reinforced natural graphite flake composites with mesophase pitch as the binder Original Research Article

592

Microstructure and thermo mechanical properties of a talc doped stoneware composition containing illitic clay

593

Microstructure and thermoelectric properties of CoSb2.75Ge0.25−xTex prepared by rapid solidification Original Research Article

594

Microstructure and thermoelectric properties of extruded n-type 95%Bi2Te2–5%Bi2Se3 alloy along bar length

595

Microstructure and thermoelectric properties of n-type 95%Bi2Te3–5%Bi2Se3 alloy produced by rapid solidification and hot extrusion

596

Microstructure and thermoelectric properties of p-type Fe0.9Mn0.1Si2 compounds prepared by pressureless sintering

597

Microstructure and thermoelectric properties of p-type Fe0.9Mn0.1Si2 compounds prepared by pressureless sintering

598

Microstructure and thermoelectric properties of SiGe-added higher manganese silicides

599

Microstructure and thermoelectric properties of Zn1−xAlxO ceramics fabricated by spark plasma sintering Original Research Article

600

Microstructure and thermo-electrical transport properties of Cd–Sn alloys

601

Microstructure and thermo-mechanical properties of pressureless infiltrated SiCp/Cu composites

602

Microstructure and thermophysical properties of B4C/graphite composites containing substitutional boron Original Research Article

603

Microstructure and thermophysical properties of graphite foam/glass composites Original Research Article

604

Microstructure and thermo-physical properties of yttria stabilized zirconia coatings with CMAS deposits

605

Microstructure and thermo-responsive behavior of poly(N-isopropylacrylamide) brushes grafted in nanopores of track-etched membranes

606

Microstructure and tool electrode erosion in EDMed of TiN/Si3N4 composites

607

Microstructure and tool electrode erosion in EDMed of TiN/Si3N4 composites

608

Microstructure and toughness of nitrogen-doped TiAl alloys

609

Microstructure and Transformation Characteristics of Acicular Ferrite in High Niobium-Bearing Microalloyed Steel Original Research Article

610

Microstructure and transformation of Al-containing nanostructured 316L stainless steel coatings processed using spark plasma sintering

611

Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

612

Microstructure and transformation temperature in alloys with a large magnetocrystalline anisotropy under external fields

613

Microstructure and transport behavior of grain boundaries in YBa2Cu3Oy: A comparison between thin films and bulk bicrystals

614

Microstructure and transport behavior of grain boundaries in YBa2Cu3Oy: A comparison between thin films and bulk bicrystals

615

Microstructure and transport current path in Ag-sheathed (Bi,Pb)2 Sr2Ca2Cu3Ox monofilamentary tapes rolled at different pressures

616

Microstructure and transport properties of [0 0 1]-tilt bicrystal grain boundaries in iron pnictide superconductor, cobalt-doped BaFe2As2

617

Microstructure and transport properties of Bi1.6Pb0.5Sr2−xLuxCa1.1Cu2.1O8+δ superconductor

618

Microstructure and transport properties of ceria and samaria doped ceria thin films prepared by EBE–IBAD

619

Microstructure and transport properties of wet poly-disperse particle assemblies

620

Microstructure and transport properties of Y-doped zirconia and Gd-doped ceria

621

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

622

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

623

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

624

Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting

625

Microstructure and tribological behavior of pulsed laser deposited a-CNx films

626

Microstructure and tribological behavior of spark plasma sintered iron-based amorphous coatings

627

Microstructure and tribological behavior of suspension plasma sprayed Al2O3 and Al2O3–YSZ composite coatings

628

Microstructure and tribological behaviors of C/C–BN composites fabricated by chemical vapor infiltration

629

Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying

630

Microstructure and tribological behaviour of liquid nitrocarburised tool steels

631

Microstructure and tribological behaviour of nano-structured metal matrix composite boride coatings synthesized by combined laser and sol–gel technology

632

Microstructure and tribological characteristics of aged Co–28Cr–5Mo–0.3C alloy

633

Microstructure and tribological characteristics of nitrided layer on 2Cr13 steel in air and vacuum

634

Microstructure and tribological characteristics of Ti–6Al–4V alloy against GCr15 under high speed and dry sliding

635

Microstructure and tribological characteristics of ZrO2–Y2O3 ceramic coatings deposited by laser-assisted plasma hybrid spraying

636

Microstructure and tribological characterization of magnetron sputtered MoS2 film deposited using nested structure material

637

Microstructure and tribological characterizations of Ni-based self-lubricating coating

638

Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing

639

Microstructure and tribological performance of CNx–TiNx composite films prepared by pulsed laser deposition

640

Microstructure and tribological performance of self-lubricating diamond/tetrahedral amorphous carbon composite film

641

Microstructure and tribological performance of Ti–6Al–4V cladding with SiC powder

642

Microstructure and tribological properties of advanced carbon/silicon carbide aircraft brake materials

643

Microstructure and tribological properties of anodic oxide layer formed on Al–Si alloy produced by semisolid processing

644

Microstructure and tribological properties of complex nitrocarburized steel

645

Microstructure and tribological properties of CrN and CrSiCN coatings

646

Microstructure and tribological properties of Cu–Zn/TiN multilayers fabricated by dual magnetron sputtering

647

Microstructure and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings

648

Microstructure and tribological properties of Fe-Mo alloy-coated steel specimens prepared by low-pressure plasma spraying

649

Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti3Al intermetallic matrix composite coatings on pure Ti by laser cladding

650

Microstructure and tribological properties of in situ synthesized TiN/Ti3Al intermetallic matrix composite coatings on titanium by laser cladding and laser nitriding

651

Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings Original Research Article

652

Microstructure and tribological properties of laser-clad Ni–Cr/TiB2 composite coatings on copper with the addition of CaF2

653

Microstructure and tribological properties of LaxCeyO1 − x − y composite nanofilms

654

Microstructure and tribological properties of low-pressure plasma-sprayed ZrO2–CaF2–Ag2O composite coating at elevated temperature

655

Microstructure and tribological properties of magnetron sputtered nc-TiC/a-C nanocomposite

656

Microstructure and tribological properties of plasma sprayed Al–Cu–Fe quasicrystalline coatings after laser post-treatment processing

657

Microstructure and tribological properties of plasma-sprayed chromium oxide–molybdenum oxide composite coatings

658

Microstructure and tribological properties of pulsed electric current sintered alumina–zirconia nanocomposites with different solid lubricants

659

Microstructure and tribological properties of reactive hot pressed TiN–TiB2 composites incorporated with or without MoSi2 from room temperature to 800 °C

660

Microstructure and tribological properties of SiOx/DLC films grown by PECVD

661

Microstructure and tribological properties of solution-treated Tribaloy alloy

662

Microstructure and tribological properties of stainless steel coatings sprayed by two methods based on spraying

663

Microstructure and tribological properties of the a-C:H films deposited by magnetron sputtering with CH4/Ar mixture

664

Microstructure and tribological properties of TiAg intermetallic compound coating

665

Microstructure and tribological properties of Ti–Cu intermetallic compound coating

666

Microstructure and tribological properties of TiCu2Al intermetallic compound coating

667

Microstructure and tribological properties of TiN, TiC and Ti(C, N) thin films prepared by closed-field unbalanced magnetron sputtering ion plating

668

Microstructure and tribological properties of WS2/MoS2 multilayer films

669

Microstructure and tribological properties of ZrO2(Y2O3) matrix composites doped with different solid lubricants from room temperature to 800 °C

670

Microstructure and tribological properties of electrodeposited Ni–Co alloy deposits

671

Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr3C2–Ag composite coating from 20 °C to 800 °C

672

Microstructure and tribological property of nanocrystalline Co–W alloy coating produced by dual-pulse electrodeposition

673

Microstructure and tribology of TiC(Ag)/a-C:H nanocomposite coatings deposited by unbalanced magnetron sputtering

674

Microstructure and type IV cracking behavior of HAZ in P92 steel weldment

675

Microstructure and vacuum tribological properties of 1Cr18Ni9Ti steel with combined surface treatments

676

Microstructure and vacuum tribology of TiC–Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition

677

Microstructure and variable emittance property of annealed La-Sr-Mn-O films

678

Microstructure and varistor properties of Y2O3-doped ZnO–Pr6O11–CoO–Cr2O3–La2O3 ceramics

679

Microstructure and varistor properties of ZnO–V2O5–MnO2 ceramics with Ta2O5 addition Original Research Article

680

Microstructure and varistor properties of ZnO–V2O5–MnO2-based ceramics

681

Microstructure and Vickers hardness of Co/Cu multilayers fabricated by electrodeposition

682

Microstructure and visible-photoluminescence of titanium dioxide thin films fabricated by dual cathodic arc and nitrogen plasma deposition

683

Microstructure and water-lubricated friction and wear properties of CrN(C) coatings with different carbon contents

684

Microstructure and wear assessment of TIG surface alloying of CP-titanium with silicon

685

Microstructure and wear behavior of (Cr,Fe)7C3 reinforced composite coating produced by plasma transferred arc weld-surfacing process

686

Microstructure and wear behavior of a porous nanocrystalline nickel-free austenitic stainless steel developed by powder metallurgy

687

Microstructure and wear behavior of Al2024\SiFe and Al2024\SiFe\Al2O3 composites

688

Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys Original Research Article

689

Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate

690

Microstructure and wear behavior of laser-textured and micro-alloyed Co-based WC and TiC composite sintered-carbide coating

691

Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2–TiC composites

692

Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr–2.5Mo–Fe alloy

693

Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr–2.5Mo–Fe alloy

694

Microstructure and wear behavior of γ/Al4C3/TiC/CaF2 composite coating on γ-TiAl intermetallic alloy prepared by Nd:YAG laser cladding

695

Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating

696

Microstructure and wear behaviors of WC–12%Co coating deposited on ductile iron by electric contact surface strengthening

697

Microstructure and wear behaviour of a vanadium carbide reinforced weld coating

698

Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids Original Research Article

699

Microstructure and wear behaviours of laser-clad Cr13Ni5Si2-based metal-silicide coatings on a titanium alloy

700

MICROSTRUCTURE AND WEAR CHARACTERISTICS OF A HYPEREUTECTIC Al-Si ALLOY PRODUCED BY SPRAY DEPOSITION

701

MICROSTRUCTURE AND WEAR CHARACTERISTICS OF A HYPEREUTECTIC Al-Si ALLOY PRODUCED BY SPRAY DEPOSITION

702

Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing

703

Microstructure and wear characteristics of high-carbon Cr-based alloy claddings formed by gas tungsten arc welding (GTAW)

704

Microstructure and wear characteristics of hypereutectic Fe–Cr–C cladding with various carbon contents

705

Microstructure and wear characteristics of rapidly solidified Al–Pb–Cu alloys

706

Microstructure and wear characteristics of rapidly solidified Al–Pb–Cu alloys

707

Microstructure and wear mechanisms in C/C composites

708

Microstructure and wear performance of arc-deposited Ti–N–O coatings on AISI 304 stainless steel

709

Microstructure and wear performance of gradient Ti/TiN metal matrix composite coating synthesized using a gas nitriding technology

710

Microstructure and wear performance of Ni–20 wt.% Pb hypomonotectic alloys

711

Microstructure and wear properties of AISI M2 tool steel on RF plasma nitriding at different N2–H2 gas compositions

712

Microstructure and wear properties of Al–Pb–Cu alloys prepared by mechanical alloying

713

Microstructure and wear properties of aluminum/aluminum–silicon composite coatings prepared by cold spraying

714

Microstructure and wear properties of Fe–15Cr–2.5Ti–2C–xB wt.% hardfacing alloys

715

Microstructure and wear properties of Fe-based hardfacing coating reinforced by TiC particles

716

Microstructure and wear properties of Fe–TiC surface composite coating by laser cladding

717

Microstructure and wear properties of Fe–VC–Cr7C3 composite coating on surface of cast steel

718

Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding

719

Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding

720

Microstructure and wear properties of laser clad Cuss/Cr5Si3 metal silicide composite coatings

721

Microstructure and wear properties of laser clad TiCo/Ti2Co intermetallic coatings on titanium alloy

722

Microstructure and wear properties of laser cladding Ti–Al–Fe–B coatings on AA2024 aluminum alloy

723

Microstructure and Wear Properties of Laser Coating Reinforced by Ti(CxN1-x on Adamite Roller Original Research Article

724

Microstructure and wear properties of laser deposited WC–12%Co composites

725

Microstructure and wear properties of laser surface-cladded Mo–WC MMC on AA6061 aluminum alloy

726

Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC

727

Microstructure and wear properties of the Fe–Ti–V–Mo–C hardfacing alloy

728

Microstructure and wear properties of the surface of 2205 duplex stainless steel reinforced with Al2O3 particles by the plasma transferred arc technique

729

Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding

730

Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc method

731

Microstructure and wear properties of WC–TiC–Co/CuZnNi composite surface coating

732

Microstructure and wear property of carbon nanotube carburizing carbon steel by laser surface remelting

733

Microstructure and wear property of Fe–Mn–Cr–Mo–V alloy cladding by submerged arc welding

734

Microstructure and wear property of laser-clad Co3Mo2Si/Coss wear resistant coatings

735

Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr–Cr3C2

736

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

737

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

738

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

739

Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating

740

Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating

741

Microstructure and wear resistance of Al–SiC composites coatings on ZE41 magnesium alloy

742

Microstructure and wear resistance of composite layers on a ductile iron with multicarbide by laser surface alloying

743

Microstructure and wear resistance of CVD TiN-coated and induction surface hardened steels

744

Microstructure and wear resistance of double-layer TiN/PSZ coatings from alkoxide solutions by H2O-containing thermal plasma CVD

745

Microstructure and wear resistance of laser clad cobalt-based alloy multi-layer coatings

746

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

747

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

748

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

749

Microstructure and wear resistance of laser clad TiC reinforced FeAl intermetallic matrix composite coatings

750

Microstructure and wear resistance of laser-melted TiC reinforced nickel aluminide dual-phase matrix in situ composite

751

Microstructure and wear resistance of low carbon steel surface strengthened by plasma melt injection of SiC particles

752

Microstructure and wear resistance of low temperature hot pressed TiB2

753

Microstructure and wear resistance of nanostructured Al2O3–8wt.%TiO2 coatings plasma-sprayed with nanopowders

754

Microstructure and Wear Resistance of N-Doped TiO2 Coatings Grown on Stainless Steel by Plasma Surface Alloying Technology Original Research Article

755

Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy substrate

756

Microstructure and wear resistance of oxide coatings on Ti–6Al–4V produced by plasma electrolytic oxidation in an inexpensive electrolyte

757

Microstructure and wear resistance of spray formed high chromium white cast iron

758

Microstructure and wear resistance of spray formed high chromium white cast iron

759

Microstructure and wear resistance of steel matrix composite coating reinforced by multiple ceramic particulates using SHS reaction of Al–TiO2–B2O3 system during plasma transferred arc overlay welding

760

Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding

761

Microstructure and wear resistance of thermal sprayed steel coatings ion beam implanted with nitrogen

762

Microstructure and wear studies of laser clad Al-Si/SiC(p) composite coatings

763

Microstructure and wear-resistance of Fe–(Ti,V)C composite

764

Microstructure and X-ray analysis on LaCaMnO thin film

765

Microstructure and XRD analysis in the brazing zone of a new WC–TiC–Co hard alloy

766

Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding

767

Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni–Si–B filler metal

768

Microstructure and yield strength of ultrafine grained aluminum processed by hot isostatic pressing

769

Microstructure array on Si and SiOx generated by micro-contact printing, wet chemical etching and reactive ion etching

770

Microstructure associated with crack initiation during low-cycle fatigue in a low nitrogen duplex stainless steel

771

Microstructure at submicron scale of the white layer produced by EDM technique

772

Microstructure based and temperature dependent model of flow behavior of a polycrystalline nickel based superalloy

773

Microstructure based model for permeability predictions of open-cell metallic foams via homogenization

774

Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening

775

Microstructure based modeling of β phase influence on mechanical response of cast AM series Mg alloys

776

Microstructure based prediction of strain hardening behavior of dual phase steels

777

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

778

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

779

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

780

Microstructure based two-scale modelling of soft tissues Original Research Article

781

Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature Original Research Article

782

Microstructure change and deuterium permeation behavior of erbium oxide coating

783

Microstructure change and deuterium permeation behavior of the yttrium oxide coating prepared by MOCVD

784

Microstructure change and helium release due to tensile loading on austenitic stainless steel implanted with low energy helium ions

785

Microstructure change and shape memory characteristics in welded Fe–28Mn–6Si–5Cr–0.53Nb–0.06C alloy

786

Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium Fe–Cr–C hardfacing alloys

787

Microstructure change in Co46Al19O35 granular thin films by annealing

788

Microstructure changes and properties of TiC-coated carbon fiber-reinforced carbon composites

789

Microstructure Changes during Cavitation Erosion for a Steel with Metastable Austenite

790

Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy Original Research Article

791

Microstructure changes in mortars attacked by sulphates at 5 °C

792

Microstructure changes in nanoparticulate gold films under different thermal atmospheres and the effects on bondability Original Research Article

793

Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: Part I. Mechanical model

794

Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: Part II. Simulation and understanding

795

Microstructure changes induced by capillary condensation in catalyst layers of PEM fuel cells

796

Microstructure changes of on the extruded high-amylose bionanocomposites as affected by moisture content via synchrotron radiation studies

797

Microstructure changes of polyimide/MMT-AlN composite hybrid films under corona aging

798

Microstructure changes of polyurethane by inclusion of chemically modified carbon nanotubes at low filler contents

799

Microstructure changes of sodium carbonate-soluble pectin of peach by AFM during controlled atmosphere storage

800

Microstructure Changes of Steel Materials under Isothermal Heat Treatment in Salt Bath

801

Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel

802

Microstructure characterisation and stress analysis of the Ti48Al2Ag coating on the near-α titanium alloy

803

Microstructure characterisation of a low density steel by transmission electron microscopic study

804

Microstructure characterisation of irradiated Am-containing MgAl2O4 (EFTTRA-T4)

805

MICROSTRUCTURE CHARACTERISTIC OF ALUMINUM TITANATE SYNTHESIED BY BOTH SOLID- STATE AND SOL-GEL PROCESSES

806

Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions

807

Microstructure Characteristic of In-situ Ti/TiC Composites

808

Microstructure characteristic, mechanical properties and sintering mechanism of nanocrystalline copper obtained by SPS process

809

Microstructure characteristics and a deformation mechanism of fine-grained tungsten heavy alloy under high strain rate compression

810

Microstructure characteristics and compressive properties of NiAl-based multiphase alloy during heat treatments

811

Microstructure characteristics and fatigue properties of welded HSLA with and without buffer layer

812

Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting

813

Microstructure characteristics and mechanical properties of cold metal transfer welding Mg/Al dissimilar metals

814

Microstructure characteristics and mechanical properties of laser weld bonding of magnesium alloy to aluminum alloy

815

Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process

816

Microstructure characteristics and temperature-dependent high cycle fatigue behavior of advanced 9% Cr/CrMoV dissimilarly welded joint

817

Microstructure characteristics during the multi-pass hot rolling and their effect on the mechanical properties of AM50 magnesium alloy sheet

818

Microstructure characteristics for anorthite composite glass with nucleating agents of TiO2 under non-isothermal crystallization

819

Microstructure characteristics of a rapidly solidified Al-Si-Ti-Pb alloy

820

Microstructure characteristics of Al2O3–13 wt.% TiO2 coating plasma spray deposited with nanocrystalline powders

821

Microstructure Characteristics of an Fe-Mn-C TWIP Steel After Deformation Original Research Article

822

Microstructure characteristics of blue-and-white porcelain from the folk kiln of Ming and Qing Dynasties

823

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

824

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

825

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

826

Microstructure characteristics of FeMo–Sialon ceramic composite

827

Microstructure characteristics of laser–MIG hybrid welded mild steel

828

Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding

829

Microstructure Characteristics of Ni-Nb Near Eutectic Alloy during EBFZM Directional Solidification

830

Microstructure characteristics of silicon carbide coatings fabricated on C/C composites by plasma spraying technology

831

Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding

832

Microstructure characterization and cation distribution of nanocrystalline magnesium ferrite prepared by ball milling

833

Microstructure characterization and deposition mechanism studies of ZrO2 thin films deposited by LI-MOCVD

834

Microstructure characterization and dynamic recrystallization in an Alloy 800H

835

Microstructure characterization and dynamic recrystallization in an Alloy 800H

836

Microstructure characterization and electrical conductivity of electroless nano Ni coated 8YSZ cermets

837

Microstructure characterization and electrical transport of nanocrystalline ZrO2–CeO2 solid solution

838

Microstructure characterization and mechanical behaviors of a hot forged high Nb containing PM-TiAl alloy

839

Microstructure Characterization and Mechanical Properties of FGH 95 Turbine Blade Retainers Original Research Article

840

Microstructure characterization and mechanical properties of TiB2/TiAl in situ composite by induction skull melting process

841

Microstructure Characterization and Mechanical Properties of TiSi2-SiC-Ti3SiC2 Composites Prepared by Spark Plasma Sintering

842

Microstructure characterization and nanomechanics of cold-sprayed pure Al and Al-Al2O3 composite coatings

843

Microstructure characterization and NO2-sensing properties of porous silicon with intermediate pore size

844

Microstructure characterization and NO2-sensing properties of tungsten oxide nanostructures

845

Microstructure characterization and phase transformation kinetic study of ball-milled m-ZrO2–30 mol% a-TiO2 mixture by Rietveld method

846

Microstructure characterization and phase transformation kinetics of ball-mill prepared nanocrystalline Mg–Zn-ferrite by Rietveldʹs analysis and electron microscopy

847

Microstructure characterization and phase transformation kinetics of ball-milled prepared nanocrystalline Zn2TiO4 by Rietveld method

848

Microstructure characterization and phase transformation kinetics of polymorphic transformed ball milled a-TiO2–10 mol% m-ZrO2 mixture by Rietveld method

849

Microstructure characterization and photocatalytic activity of mesoporous TiO2 films with ultrafine anatase nanocrystallites

850

Microstructure characterization and polymorphic transformation kinetic study of ball-milled nanocrystalline a-TiO2–20 mol% m-ZrO2 mixture by X-ray diffraction and electron microscopy

851

Microstructure characterization and properties of chemically synthesized Co2Z hexaferrite

852

Microstructure characterization and thermal analysis of hybrid block copolymer α-methoxy-poly(ethylene glycol)-block-poly[ε-(benzyloxycarbonyl)-l-lysine] for biomedical applications

853

Microstructure characterization based on the type of deformed grains in cold-rolled, Cu-added, bake-hardenable steel

854

Microstructure characterization in cryomilled Al 5083

855

Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery

856

Microstructure characterization of a cobalt-oxide-doped cerium-gadolinium-oxide by analytical and high-resolution TEM Original Research Article

857

Microstructure characterization of a food-grade U-type microemulsion system by differential scanning calorimetry and electrical conductivity techniques

858

Microstructure characterization of acetylenic polymers by Curie-point pyrolysis/capillary gas chromatography/mass spectrometry

859

Microstructure characterization of asphaltenes from atmospheric residue before and after hydroprocessing

860

Microstructure characterization of austenitic Fe–25Mn–22Cr–2Si–0.7N alloy processed by twin roll strip casting

861

Microstructure characterization of ball milled prepared nanocrystalline perovskite CaTiO3 by Rietveld method

862

Microstructure characterization of ball-mill-prepared nanocrystalline CaCu3Ti4O12 by Rietveld method

863

Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering

864

Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering

865

Microstructure characterization of Cu processed by compression with oscillatory torsion

866

Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy Original Research Article

867

Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

868

Microstructure characterization of D-gun sprayed Fe–Al intermetallic coatings

869

Microstructure characterization of granular materials

870

Microstructure characterization of heat affected zone after welding in Mod.9Cr–1Mo steel

871

Microstructure characterization of high energy ball-milled nanocrystalline V2O5 by Rietveld analysis

872

Microstructure characterization of hot-pressed β-silicon nitride containing β-Si3N4 seeds

873

Microstructure characterization of in situ synthesized porous Si2N2O ceramics using spodumene additive

874

Microstructure characterization of in situ synthesized porous Si3N4–Si2N2O composites using feldspar additive

875

Microstructure characterization of InAs0.93Sb0.07 films grown by ramp-cooled liquid phase epitaxy

876

Microstructure characterization of laser welded Ti-6Al-4V fusion zones

877

Microstructure characterization of mechanically activated hematite using XRD line broadening

878

Microstructure characterization of mechanosynthesized nanocrystalline NiFe2O4 by Rietveldʹs analysis

879

Microstructure characterization of nanocrystalline TiC synthesized by mechanical alloying

880

Microstructure characterization of nanometer carbides heterogeneous precipitation in Ti–Nb and Ti–Nb–Mo steel

881

Microstructure characterization of oxidation of aluminized coating prepared by a combined process

882

Microstructure characterization of polyamide fibre/latex-filled plaster composites

883

Microstructure characterization of polymorphic transformed ball-milled anatase TiO2 by Rietveld method

884

Microstructure characterization of porous silicon as studied by positron annihilation measurements at low temperatures and high vacuum

885

Microstructure characterization of precursor-derived Si-C-N ceramics before and after creep testing Original Research Article

886

Microstructure characterization of SiCl4-based microcrystalline silicon films by effusion of implanted helium

887

Microstructure characterization of the NiAl intermetallic compound with Fe, Ga and Mo additions obtained by mechanical alloying

888

Microstructure characterization of the NiAl intermetallic compound with Fe, Ga and Mo additions obtained by mechanical alloying

889

Microstructure characterization of the non-modulated martensite in Ni–Mn–Ga alloy

890

Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219

891

Microstructure characterization of thermal barrier coating systems after controlled exposure to a high temperature

892

Microstructure characterization of ZrB2–SiC composite fabricated by spark plasma sintering with TaSi2 additive

893

Microstructure characterization through mechanical, electrokinetic and spectroscopic methods of polyampholyte gelatin hydrogels crosslinked with poly(vinyl alcohol)

894

Microstructure consideration with plastic spin and multiple back-stresses for large strain problems in soils

895

Microstructure control and deuterium permeability of erbium oxide coating on ferritic/martensitic steels by metal-organic decomposition

896

Microstructure control and ductility improvement of La-Al-(Cu, Ni) composites by Bridgman solidification

897

Microstructure control and ductility improvement of La–Al–(Cu, Ni) composites by Bridgman solidification Original Research Article

898

Microstructure control and ductility improvement of the two-phase γ-Fe/κ-(Fe, Mn)3AlC alloys in the Fe–Mn–Al–C quaternary system

899

Microstructure control and ductility in Ni3Al polycrystals

900

Microstructure control and ductility in Ni3Al polycrystals

901

Microstructure control and mechanical properties of porous silicon nitride ceramics

902

Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidification

903

Microstructure control and tensile properties of three-phase alloys based on the E21 Co3AlC and B2 CoAl

904

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

905

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

906

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

907

Microstructure control by thermomechanical processing in β-Ti–15–3 alloy

908

Microstructure control during severe plastic deformation of Al–Cu–Li and the influence on strength and ductility

909

Microstructure control for high strength 9Cr ferritic–martensitic steels

910

Microstructure control in the growth of large area Tl-2212 thin films

911

Microstructure control in two-phase (B2+L12) Ni–Al–Fe alloys by addition of carbon

912

Microstructure control in two-phase (B2+L12) Ni–Al–Fe alloys by addition of carbon

913

Microstructure control in two-phase Al–21Ti–23Cr alloy

914

Microstructure control of ceramic membrane support from corundum-rutile powder mixture

915

Microstructure control of continuously porous t-ZrO2 bodies fabricated by multi-pass extrusion process

916

Microstructure control of CrNx films during high power impulse magnetron sputtering

917

Microstructure control of Cu-base metallic glass powder composites by extrusion

918

Microstructure control of SOFC cathodes using the self-organizing behavior of LSM/ScSZ composite powder material prepared by spray pyrolysis

919

Microstructure control of TCP/TCP-(t-ZrO2)/t-ZrO2 composites for artificial cortical bone

920

Microstructure control of TiAl alloys containing β stabilizers by directional solidification

921

Microstructure control of TiAl alloys containing β stabilizers by directional solidification

922

Microstructure control of TiO2 nanotubular films for improved VOC sensing

923

Microstructure control of unidirectional growth of η-Cu6Sn5 in microbumps on 〈1 1 1〉 oriented and nanotwinned Cu Original Research Article

924

Microstructure control of very thin polycrystalline silicon layers on glass substrate by plasma enhanced CVD

925

Microstructure control on thermoelectric properties of Ca0.96Sm0.04MnO3 synthesised by co-precipitation technique

926

Microstructure control to improve mechanical properties of vanadium alloys for fusion applications

927

Microstructure controlled bending response in AA6016 Al alloys

928

Microstructure controlling by heat treatment and complex processing for Ti2AlNb based alloys

929

Microstructure controlling by heat treatment and complex processing for Ti2AlNb based alloys

930

Microstructure degradation of an anode/electrolyte interface in SOFC studied by transmission electron microscopy

931

Microstructure degradation of EB-PVD TBCs on Pd–Pt-modified aluminide coatings under cyclic oxidation conditions

932

Microstructure degradation of LSM-YSZ cathode in SOFCs operated at various conditions

933

Microstructure degradation of simple, Pt- and Pt + Pd-modified aluminide coatings on CMSX-4 superalloy under cyclic oxidation conditions

934

Microstructure degradation of YSZ in Ni/YSZ anodes of SOFC operated in phosphine-containing fuels

935

Microstructure dependence of a Cu–38Zn alloy on processing conditions of constrained groove pressing Original Research Article

936

Microstructure dependence of diffusional transport

937

Microstructure dependent erosion in Cr3C2–20(NiCr) coating deposited by a detonation gun

938

Microstructure dependent fatigue crack growth in aged hardened aluminium alloys

939

Microstructure dependent fatigue crack growth in Al–Mg–Sc alloy

940

Microstructure dependent hardness and fracture behavior in liquid-phase-sintered Al2O3

941

Microstructure dependent viscoplastic damage modelling of tin–lead solder

942

Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering

943

Microstructure design and mechanical properties of thermal barrier coatings with layered top and bond coats

944

Microstructure design by mechanical alloying

945

Microstructure design in mixed biopolymer composites

946

Microstructure design of lead-free piezoelectric ceramics

947

Micro-structure detection of a glossy granite surface machined by the grinding process

948

Microstructure determination of 2-hydroxy ethyl methacrylate and methyl acrylate copolymers by NMR spectroscopy

949

Microstructure determination of 9-ethyl-3-hydroxymethylcarbazolyl acrylate/methacrylonitrile using two-dimensional NMR spectroscopy

950

Microstructure determination of poly(acrylonitrile-co-methyl methacrylate-co-methyl acrylate) terpolymers by 2D HMBC

951

Microstructure developed in the surface layer of Ti-6Al-4V alloy after sliding wear in vacuum

952

Microstructure development and densification of ultrafine Y-TZP monoliths obtained by seeding-assisted chemical coprecipitation

953

Microstructure development and dielectric properties of hydrothermal BaTiO3 thin films

954

Microstructure development and hardening during high pressure torsion of commercially pure aluminium: Strain reversal experiments and a dislocation based model

955

Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy

956

Microstructure development and helium behavior in nickel and vanadium base alloys

957

Microstructure development and mechanical properties of quenching and partitioning (Q&P) steel and an incorporation of hot-dipping galvanization during Q&P process

958

Microstructure development and metallurgical analysis of the Al–Si contact reaction

959

Microstructure development and nonlinear electrical characteristics of the SnO2·CuO·Ta2O5 based varistors

960

Microstructure development and phase evolution of alumina–mullite nanocomposite

961

Microstructure development and properties of alumina–Ti aluminide interpenetrating composites

962

Microstructure development and properties of alumina–Ti aluminide interpenetrating composites

963

Microstructure development and properties of novel Ba-doped phase Sialon ceramics

964

Microstructure development and properties of the AlCuFe quasicrystalline coating on near-α titanium alloy

965

Microstructure development and solute redistribution in aluminium alloys under low and moderate shear rates during rheo processing

966

Microstructure development and tensile mechanical properties of Mg–Zn–RE–Zr magnesium alloy

967

Microstructure development during dissimilar welding: Case of laser welding of Ti with Ni involving intermetallic phase formation

968

Microstructure development during equal-channel angular pressing of titanium Original Research Article

969

Microstructure development during isothermal brazing of Ni/BNi-2 couples

970

Microstructure development during NiAl intermetallic synthesis in reactive Ni–Al nanolayers: Numerical investigations vs. TEM observations

971

Microstructure development during sintering and heat-treatment of cemented carbides and cermets

972

Microstructure development in (LaxSr1−x)MnO3 ceramics

973

Microstructure development in a thermomechanically processed Ti15V3Cr3Sn3Al alloy

974

Microstructure development in a thermomechanically processed Ti15V3Cr3Sn3Al alloy

975

Microstructure development in alloy splats during rapid solidification

976

Microstructure development in alloy splats during rapid solidification

977

Microstructure development in alloy splats during rapid solidification

978

Microstructure development in calcium hexaluminate

979

Microstructure development in Cr–Al–Si–N nanocomposites deposited by cathodic arc evaporation

980

Microstructure development in electrospun carbon nanotube reinforced polyvinylidene fluoride fibers and its influence on tensile strength and dielectric permittivity

981

Microstructure development in electrospun carbon nanotube reinforced polyvinylidene fluoride fibers and its influence on tensile strength and dielectric permittivity

982

Microstructure development in gamma alloy mill products by thermomechanical processing

983

Microstructure development in gamma alloy mill products by thermomechanical processing

984

Microstructure development in hot deformed AA6082

985

Microstructure development in hot-pressed silicon carbide: effects of aluminum, boron, and carbon additives Original Research Article

986

Microstructure development in mechanically alloyed yttria dispersed austenitic steels Original Research Article

987

Microstructure development in Nb3Sn(Ti) internal tin superconducting wire

988

Microstructure development of Al2O3–13wt.%TiO2 plasma sprayed coatings derived from nanocrystalline powders Original Research Article

989

Microstructure development of alkali-activated fly ash cement: a descriptive model

990

Microstructure development of chars derived from high-temperature pyrolysis of barley (Hordeum vulgare L.) hulls

991

Microstructure development of creep resistant ferritic steel during creep

992

Microstructure development of creep resistant ferritic steel during creep

993

Microstructure development of creep resistant ferritic steel during creep

994

Microstructure development of different orientated nickel-base single crystal superalloy in directional solidification

995

Microstructure development of mesoporous silica thin films with pore channels aligned perpendicularly to electrode surfaces and application to proton conducting composite electrolyte membranes

996

Microstructure development of plasma-sprayed yttria-stabilized zirconia and its effect on electrical conductivity

997

Microstructure development of proton-conducting La-based metaphosphate during heat-treatment

998

Microstructure development of thermoplastic polyurethanes under compression: The influence from first-order structure to aggregation structure and a structural optimization

999

Microstructure development of unidirectionally solidified (Nb)/Nb3Si eutectic alloys

1000

Microstructure development, hardness, toughness and creep behaviour of pressureless sintered alumina/SiC micro–nanocomposites obtained by slip-casting