ليست عنوان مقالات لاتين Fatigue crack growth behaviour in ferritic ductile iron with surface crack under reverse bending Fatigue strength of a clutch pedal made of reprocessed short glass fibre reinforced polyamide

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Fatigue crack growth behaviour in ferritic ductile iron with surface crack under reverse bending

2

Fatigue crack growth behaviour in titanium aluminides

3

Fatigue crack growth behaviour in titanium aluminides

4

Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450 °C and 600 °C

5

Fatigue crack growth behaviour of A533B steel in pressurized water at 288 and 28 °C

6

FATIGUE CRACK GROWTH BEHAVIOUR OF FIBRE-METAL LAMINATE GLARE-1 AND METAL LAMINATE 7475 WITH DIFFERENT BLUNT NOTCHES

7

Fatigue crack growth behaviour of gas tungsten arc, electron beam and laser beam welded Ti–6Al–4V alloy

8

FATIGUE CRACK GROWTH BEHAVIOUR OF METALLIC BIOMATERIALS IN A PHYSIOLOGICAL ENVIRONMENT

9

Fatigue crack growth behaviour of pulsed current gas tungsten arc, friction stir and laser beam welded AZ31B magnesium alloy joints

10

FATIGUE CRACK GROWTH BEHAVIOUR OF SM45C STEEL UNDER CYCLIC MODE I WITH SUPERIMPOSED STATIC MODE II LOADINGS

11

FATIGUE CRACK GROWTH BEHAVIOUR OF SM45C STEEL UNDER MIXED-MODE I AND II LOADING

12

Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings

13

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure

14

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure

15

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure

16

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data

17

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data

18

Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part II. Life predictions using fatigue crack growth data

19

Fatigue crack growth characterization and simulation of a porous steel

20

Fatigue crack growth characterization and simulation of a porous steel

21

FATIGUE CRACK GROWTH DUE TO TWO SUCCESSIVE SINGLE OVERLOADS

22

Fatigue crack growth estimation by relevance vector machine

23

Fatigue crack growth experiments on specimens subjected to monotonic large scale yielding

24

Fatigue crack growth for a surface crack in a round bar under multi-axial loading condition

25

Fatigue crack growth for straight-fronted edge crack in a round bar

26

Fatigue crack growth from corrosion damage in 7075-T6511 aluminium alloy under aircraft loading

27

Fatigue crack growth from flaws in combat aircraft

28

Fatigue crack growth from foreign object damage under combined low and high cycle loading. Part I: Experimental studies

29

Fatigue crack growth from foreign object damage under combined low and high cycle loading. Part II: A two-parameter predictive approach

30

Fatigue crack growth from plain and cold expanded holes in aluminium alloys

31

Fatigue crack growth from small defects under out-of-phase combined loading

32

Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures

33

Fatigue crack growth from small to long cracks in very-high-cycle fatigue with surface and internal "fish-eye" failures for ferrite-perlitic low carbon steel SAE 8620

34

Fatigue crack growth from small to long cracks in very-high-cycle fatigue with surface and internal “fish-eye” failures for ferrite-perlitic low carbon steel SAE 8620

35

Fatigue crack growth from small to long cracks in VHCF with surface initiations

36

Fatigue crack growth history in damage tolerance design of aircraft structures

37

Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects

38

Fatigue crack growth in a coarse-grained iron–silicon alloy

39

Fatigue crack growth in a diverse range of materials

40

Fatigue crack growth in a Ni–Sn multilayered composite

41

Fatigue crack growth in a Ni–Sn multilayered composite

42

Fatigue crack growth in a structural steel under single and multiple periodic overload cycles

43

Fatigue crack growth in a Tiβ21s/SCS-6 composite Original Research Article

44

Fatigue crack growth in a welded rail under the influence of residual stresses

45

Fatigue crack growth in adhesively bonded composite-metal double-lap joints

46

Fatigue crack growth in an in-situ titanium matrix composite

47

Fatigue crack growth in an in-situ titanium matrix composite

48

Fatigue crack growth in asphalt and asphalt-interfaces

49

Fatigue crack growth in austempered ductile and grey cast irons—stress ratio effects in air and mine water

50

Fatigue crack growth in austempered ductile and grey cast irons—stress ratio effects in air and mine water

51

Fatigue crack growth in bonded DCB specimens

52

FATIGUE CRACK GROWTH IN D16T A1-ALLOY SHEET SUBJECTED TO BIAXIAL OUT-OF-PHASE LOADING

53

Fatigue crack growth in degrading elastic components of nonlinear structural systems under random loading

54

Fatigue crack growth in ferroelectrics under electrical loading

55

Fatigue crack growth in heat-treated aluminium alloys

56

Fatigue crack growth in inhomogeneous steel components

57

Fatigue crack growth in interstitially hardened AISI 316L stainless steel

58

Fatigue crack growth in laser-shock-peened Ti–6Al–4V aerofoil specimens due to foreign object damage

59

Fatigue crack growth in magnesium single crystals under cyclic loading: Molecular dynamics simulation

60

Fatigue crack growth in nano-composites

61

Fatigue crack growth in nickel-based superalloys at elevated temperatures

62

Fatigue Crack Growth in Plastically Compressible Solids: Role of Negative Stress Ratio, Plastic Compressibility and Strain Softening

63

Fatigue crack growth in polycrystalline IN 718 superalloy

64

Fatigue crack growth in railway axles: Assessment concept and validation tests

65

Fatigue crack growth in random residual stresses

66

Fatigue crack growth in real structures

67

Fatigue crack growth in SiC particulates reinforced Al matrix graded composite

68

Fatigue crack growth in SiC particulates reinforced Al matrix graded composite

69

Fatigue crack growth in some PM low alloy steels consolidated by rotary forging and sintering

70

Fatigue crack growth in stiffened steel tubular joints in seawater environment

71

Fatigue crack growth in the aluminium alloy D16 under constant and variable amplitude loading

72

Fatigue crack growth in the D16CzATW aluminium alloy in the presence of a calibrated hole under simple bending

73

Fatigue crack growth in thin aluminium alloy sheets under loading sequences with periodic overloads

74

Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: Experimental

75

Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: Modelling

76

Fatigue Crack Growth in Thin-Wall Pipes Subjected to Bending

77

Fatigue crack growth in TRIP steel under positive R-ratios

78

FATIGUE CRACK GROWTH IN TWO ADVANCED TITANIUM ALLOYS UNDER CONSTANT AND VARIABLE AMPLITUDE LOADING AT 25 AND 175 °C

79

Fatigue crack growth law for ferroelectrics under cyclic electrical and combined electromechanical loading

80

Fatigue crack growth measurement in a superalloy at elevated temperature

81

Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes

82

Fatigue crack growth mechanism in aged 9Cr–1Mo steel: threshold and Paris regimes

83

Fatigue crack growth mechanisms at the microstructure scale in Al–Si–Mg cast alloys: Mechanisms in the near-threshold regime Original Research Article

84

Fatigue crack growth mechanisms in HSLA-80 steels

85

Fatigue crack growth mechanisms in HSLA-80 steels

86

Fatigue crack growth mechanisms in steels

87

Fatigue crack growth model for a thin steel plate containing hydrogen

88

Fatigue crack growth model for constant amplitude loading

89

Fatigue crack growth modeling of attachment lugs

90

Fatigue crack growth modeling of pipeline steels in high pressure gaseous hydrogen

91

Fatigue crack growth of a corner crack in a square prismatic bar under combined cyclic torsion–tension loading

92

Fatigue crack growth of a double fillet weld

93

Fatigue crack growth of a welded tube–flange connection under bending and torsional loading

94

Fatigue crack growth of AA2219 under different aging conditions

95

Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen

96

Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen

97

Fatigue crack growth of bonded composite repairs in gigacycle regime

98

Fatigue crack growth of filament wound GRP pipes with a surface crack under cyclic internal pressure

99

Fatigue crack growth of filled rubber under constant and variable amplitude loading conditions

100

Fatigue crack growth of SiC particle reinforced metal matrix composites

101

Fatigue crack growth of UDIMET 720 Li superalloy at elevated temperature

102

Fatigue crack growth performance of peened friction stir welded 2195 aluminum alloy joints at elevated and cryogenic temperatures

103

Fatigue crack growth prediction accounting for the damage zone

104

Fatigue crack growth prediction in a gas turbine casing

105

Fatigue crack growth prediction in concrete slabs

106

Fatigue crack growth prediction in GLARE hybrid laminates

107

Fatigue crack growth prediction in GLARE hybrid laminates

108

Fatigue crack growth predictions based on damage accumulation calculations ahead of the crack tip

109

Fatigue crack growth rate behaviour of friction-stir aluminium alloy AA2024-T3 welds under transient thermal tensioning

110

Fatigue crack growth rate model for metallic alloys

111

Fatigue crack growth rates and paths in two planar specimens under mixed mode loading

112

FATIGUE CRACK GROWTH RATES IN Al–Li ALLOY, 2090. INFLUENCE OF ORIENTATION, SHEET THICKNESS AND SPECIMEN GEOMETRY

113

Fatigue crack growth rates under sequential mixed-mode I and II loading cycles

114

Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites

115

Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites

116

Fatigue crack growth resistance of ECAPed ultrafine-grained copper

117

Fatigue crack growth resistance of gas tungsten arc, electron beam and friction stir welded joints of AA2219 aluminium alloy

118

Fatigue crack growth retardation in an HSLA steel in benign environments

119

Fatigue crack growth simulation in a first stage of compressor blade

120

Fatigue crack growth simulation in a generator fan blade

121

Fatigue crack growth simulation in heterogeneous material using s-version FEM

122

Fatigue crack growth simulation of aluminium alloy under spectrum loadings

123

Fatigue crack growth simulations of 3-D problems using XFEM

124

Fatigue crack growth simulations of 3-D problems using XFEM

125

Fatigue crack growth studies under mixed-mode loading

126

Fatigue crack growth study of CFRP patch repaired Al 2014-T6 panel having an inclined center crack using FEA and DIC

127

Fatigue crack growth testing of the Super CMV hollow shafts under combined torsional and axial loading

128

Fatigue crack growth threshold conditions at notches. Part I: theory

129

Fatigue crack growth threshold conditions at notches. Part II: generalization and application to experimental results

130

Fatigue crack growth through particulate clusters in polycarbonate material

131

Fatigue crack growth towards the weld interface of alloy and maraging steels

132

Fatigue crack growth under combined thermal cycling and mechanical loading

133

Fatigue crack growth under flight spectrum loading with superposed biaxial loading due to fuselage cabin pressure

134

Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel

135

FATIGUE CRACK GROWTH UNDER ULTRASONIC FATIGUE LOADING

136

Fatigue crack growth under variable amplitude loading Part I: experimental investigations

137

Fatigue crack growth under variable amplitude loading Part II: analytical and numerical investigations

138

Fatigue crack growth under variable-amplitude loading: Part I – Model formulation in state-space setting

139

Fatigue crack growth under variable-amplitude loading: Part II – Code development and model validation

140

Fatigue crack growth with overloads/underloads: Interaction effects and surface roughness

141

Fatigue crack growth—Microstructure relationships in a high-manganese austenitic TWIP steel

142

Fatigue crack healing by a controlled high density electric current field

143

Fatigue crack initiation and crystallographic crack growth in an austenitic stainless steel

144

Fatigue crack initiation and fracture behavior of a copper bicrystal with a perpendicular grain boundary

145

Fatigue crack initiation and fracture behavior of a copper bicrystal with a perpendicular grain boundary

146

Fatigue crack initiation and growth at holes in a high strength bainitic roller bearing steel when loaded with non-proportional shear and compressive cycles

147

Fatigue crack initiation and growth behavior of Ti–6Al–4V under non-proportional multiaxial loading

148

Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography

149

Fatigue crack initiation and growth in A517 submerged arc welds under variable amplitude loading

150

Fatigue crack initiation and growth in AlMg4.5Mn butt weldments

151

Fatigue crack initiation and growth in solder alloys

152

Fatigue crack initiation and growth of 16MnR steel with stress ratio effects

153

Fatigue crack initiation and growth on a steel in the very high cycle regime with sea water corrosion

154

Fatigue crack initiation and propagation behavior of forging die steels

155

Fatigue crack initiation and propagation in A356 alloy reinforced with in situ TiB2 particles

156

Fatigue crack initiation and propagation in an α-iron polycrystal

157

Fatigue crack initiation and propagation in an α-iron polycrystal

158

Fatigue crack initiation and propagation under cyclic contact loading

159

Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters

160

Fatigue crack initiation at a notch

161

Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel

162

Fatigue crack initiation in fibre-metal laminate glare 2

163

Fatigue crack initiation in fibre-metal laminate glare 2

164

Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminates

165

Fatigue crack initiation life prediction of railroad wheels

166

Fatigue crack initiation life prediction of ultra-fine grain chromium–bronze prepared by equal-channel angular pressing

167

Fatigue crack initiation point of load carrying cruciform joints in low and high cycle fatigue regions

168

Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy

169

Fatigue crack investigation for the Arkansas River Bridge in Hutchinson, Kansas

170

Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage

171

Fatigue crack nucleation and growth behaviors of laser melting deposited Ti–6Al–2Zr–Mo–V

172

Fatigue crack nucleation and growth in filled natural rubber

173

Fatigue crack nucleation assisted by thermal activation

174

Fatigue crack nucleation assisted by thermal activation

175

Fatigue crack nucleation at interfaces

176

Fatigue crack nucleation at interfaces

177

Fatigue crack nucleation at interfaces

178

Fatigue crack nucleation in iron and a high strength low alloy steel

179

Fatigue crack nucleation in iron and a high strength low alloy steel

180

Fatigue crack nucleation: Mechanistic modelling across the length scales

181

Fatigue crack nuclei in austempered ductile cast iron

182

Fatigue crack orientation in NR and SBR under variable amplitude and multiaxial loading conditions

183

Fatigue crack path and threshold in Mode II and Mode III loadings

184

Fatigue crack path in Cu–Ni–Mo alloyed PM steel

185

Fatigue crack paths for inclined cracks and surface flaws under biaxial loading

186

Fatigue crack paths in AA2024-T3 when loaded with constant amplitude and simple underload spectra

187

Fatigue crack paths in coarse-grained magnesium

188

Fatigue crack propagation after overloading and underloading at negative stress ratios

189

Fatigue crack propagation analyses based on plastic energy approach

190

Fatigue crack propagation analysis for welded joint subjected to bending

191

Fatigue crack propagation analysis of surface cracks in pipe elbows

192

Fatigue crack propagation and fracture characteristics of in-situ titanium-matrix composites

193

Fatigue crack propagation and fracture mechanisms of wrought magnesium alloys in different environments

194

Fatigue crack propagation and local crack-tip strain behavior in TiNi shape memory fiber reinforced composite

195

Fatigue crack propagation and threshold for shallow micro-cracks under out-of-phase multiaxial loading in a gear steel

196

Fatigue crack propagation assessment based on residual stresses obtained through cut-compliance technique

197

Fatigue crack propagation at concrete–concrete bi-material interfaces

198

Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic

199

Fatigue crack propagation at elevated temperatures in titanium aluminide intermetallic

200

Fatigue crack propagation behavior in four-points bending specimens with multiple parallel edge notches at regular intervals

201

Fatigue crack propagation behavior in friction stir welding of AA6063-T5: Roles of residual stress and microstructure

202

Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses

203

Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses

204

Fatigue crack propagation behavior of an as-extruded magnesium alloy AZ80

205

Fatigue crack propagation behavior of friction stir welded 5083-H32 and 6061-T651 aluminum alloys

206

Fatigue crack propagation behavior of friction stir welded 5083-H32 Al alloy

207

Fatigue Crack Propagation Behavior of TiNi(50.6) Shape Memory Alloy

208

Fatigue crack propagation behavior of underfill materials in microelectronic packaging

209

Fatigue crack propagation behavior of underfill materials in microelectronic packaging

210

Fatigue crack propagation behaviour derived from S–N data in very high cycle regime

211

Fatigue crack propagation behaviour in ultra-fine grained low carbon steel

212

Fatigue crack propagation behaviour of steels with different microstructures

213

Fatigue crack propagation damaging micromechanisms in ductile cast irons

214

Fatigue crack propagation estimation of SUS 630 shaft based on fracture surface analysis under pitting corrosion condition

215

Fatigue crack propagation for a through thickness crack: a crack propagation law considering cyclic plasticity near the crack tip

216

Fatigue crack propagation from a cold-worked hole

217

Fatigue crack propagation from a hole in tubular specimens under axial and torsional loading

218

Fatigue crack propagation from a precrack under combined torsional and axial loading

219

Fatigue crack propagation in 2.25 Cr–1.0Mo steel weldments in air and hydrogen

220

Fatigue crack propagation in 2.25 Cr–1.0Mo steel weldments in air and hydrogen

221

Fatigue crack propagation in 7050-T7451 plate alloy

222

Fatigue crack propagation in a quasi-one-dimensional elasto-plastic model

223

Fatigue crack propagation in a sintered 2xxx series aluminium alloy

224

Fatigue crack propagation in aluminium alloy foams

225

FATIGUE CRACK PROPAGATION IN AUSTENITIC STAINLESS STEEL UNDER LOW FREQUENCY LOADING AND SALT WATER CONDITIONS

226

Fatigue crack propagation in cast duplex stainless steels: thermal ageing and microstructural effects

227

Fatigue crack propagation in cellular metals

228

Fatigue crack propagation in cold drawn steel

229

Fatigue crack propagation in cold drawn steel

230

Fatigue crack propagation in marine structures under seaway loading

231

Fatigue crack propagation in rocker and roller–rocker bearings of railway steel bridges

232

Fatigue crack propagation in some PM steels

233

Fatigue crack propagation in the wing to fuselage connection of the new trainer aircraft M346

234

Fatigue crack propagation in threshold regime under residual stresses

235

Fatigue crack propagation in Ti–6Al–4V subjected to high strain amplitudes

236

Fatigue crack propagation in titanium alloys with lamellar and bi-lamellar microstructures

237

Fatigue crack propagation in titanium alloys with lamellar and bi-lamellar microstructures

238

Fatigue crack propagation in ultrafine grained Al–Mg alloy

239

Fatigue crack propagation in β Ti–15Mo–5Zr–3Al alloy

240

Fatigue crack propagation in β Ti–15Mo–5Zr–3Al alloy

241

Fatigue crack propagation model for plain concrete – An analogy with population growth

242

Fatigue crack propagation monitoring by Acoustic Emission signal analysis

243

Fatigue crack propagation normal to a plasticity mismatched bimaterial interface

244

Fatigue crack propagation of 444 stainless steel welded joints in air and in 3%NaCl aqueous solution

245

Fatigue crack propagation of AZ61 magnesium alloy under controlled humidity and visualization of hydrogen diffusion along the crack wake

246

Fatigue crack propagation of multiple coplanar cracks with the coupled extended finite element/fast marching method

247

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

248

Fatigue crack propagation of through cracks in thin sheets under combined traction and bending stresses

249

Fatigue crack propagation prediction by cyclic plasticity damage accumulation models

250

Fatigue crack propagation properties of Ti–6Al–4V in vacuum environments

251

Fatigue crack propagation resistance in homogeneous and graded alumina–epoxy composites

252

Fatigue crack propagation resistance of a FeAl-based alloy

253

Fatigue crack propagation resistance of a FeAl-based alloy

254

Fatigue crack propagation resistance of a Ti48Al2Mn2Nb alloy in the as-cast condition

255

Fatigue crack propagation resistance of a Ti48Al2Mn2Nb alloy in the as-cast condition

256

Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene

257

Fatigue crack propagation simulation in an aircraft engine fan blade attachment

258

Fatigue crack propagation trajectories under mixed-mode cyclic loading

259

Fatigue crack propagation under gaseous hydrogen in a precipitation-hardened martensitic stainless steel

260

Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method Original Research Article

261

Fatigue crack shielding and deflection in plain bearings under large-scale yielding

262

Fatigue crack surface crystallography near crack initiating particle clusters in precipitation hardened legacy and modern Al–Zn–Mg–Cu alloys

263

Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites

264

Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites

265

Fatigue cracking and fracture behaviors of coarse-grained copper under cyclic tension–compression and torsion loadings

266

Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energy Original Research Article

267

Fatigue cracking from a corrosion pit in an aircraft bulkhead

268

Fatigue cracking in high-cycle- and very-high-cycle-fatigue areas of peened and unpeened Al-based alloys because of fretting damages

269

Fatigue cracking of a bare steel first wall in an inertial confinement fusion chamber

270

Fatigue cracking of an aircraft wheel

271

FATIGUE CRACKING POSSIBILITY ALONG GRAIN BOUNDARIES AND PERSISTENT SLIP BANDS IN COPPER BICRYSTALS

272

Fatigue cracking simulation based on crack closure effects in Al-based sheet materials subjected to biaxial cyclic loads

273

Fatigue cracks and failures in cement industry, shipbuilding and power plant facilities

274

Fatigue cracks emanating from sharp notches in high-strength aluminium alloys: The effect of loading direction, kinking, notch geometry and microstructure

275

Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing

276

Fatigue cracks in Eurofer 97 steel: Part I. Nucleation and small crack growth kinetics

277

Fatigue cracks in Eurofer 97 steel: Part II. Comparison of small and long fatigue crack growth

278

Fatigue cracks in longitudinal ribs of steel orthotropic deck

279

Fatigue cracks in railway bridge hangers due to wind induced vibrations – Failure analysis, measures and remaining service life estimation

280

Fatigue cracks nucleation on steel, acoustic emission and fractal analysis

281

Fatigue damage accumulation and residual strength assessment of CFRP laminates

282

Fatigue damage accumulation in carbon/epoxy laminated composites

283

Fatigue damage accumulation in cold-drawn patented steel wire under variable loading

284

Fatigue damage accumulation in Ni3Al and NiAl

285

Fatigue damage accumulation in Ni3Al and NiAl

286

Fatigue damage accumulation modelling in the range of complex low-cycle loadings – The strain approach and its experimental verification on the basis of EN AW-2007 aluminum alloy

287

Fatigue damage accumulation of cold expanded hole in aluminum alloys subjected to block loading

288

Fatigue damage analysis and life assessment under variable amplitude loading conditions

289

Fatigue damage analysis of aluminized glass fiber composites

290

Fatigue damage analysis of unidirectional metal matrix composites

291

Fatigue Damage Analysis on Body Shell of a Passenger Vehicle

292

Fatigue damage and crack growth under variable amplitude loading with reference to the counting methods of stress–strain ranges

293

Fatigue damage and environment interaction of polyester aluminized glass fiber composites

294

Fatigue damage and fracture behavior of tungsten fiber reinforced Zr-based metallic glassy composite

295

Fatigue damage and its interaction with hydrogen in martensitic steels

296

Fatigue damage and its interaction with hydrogen in martensitic steels

297

Fatigue damage and its localization in particulate metal matrix composites

298

Fatigue damage and its localization in particulate metal matrix composites

299

Fatigue damage assessment for a spectral model of non-Gaussian random loads

300

Fatigue damage assessment in AISI 8620 steel using Barkhausen noise

301

Fatigue damage assessment of corroded oil tanker details based on global and local stress approaches

302

Fatigue damage assessment of various welded joints under uniaxial loading based on energy methods

303

Fatigue damage behaviors of carbon fiber-reinforced epoxy composites containing nanoclay

304

Fatigue Damage Calculated by the Ratio-Method to Materials and Its Machine Part

305

Fatigue damage characterization and modeling of a triaxially braided polymer matrix composite at elevated temperatures

306

Fatigue damage detection in graphite/epoxy composites using sonic infrared imaging technique

307

Fatigue damage development in pure polycrystalline magnesium under cyclic tension–compression loading

308

Fatigue damage evaluation in SiCp/2024 by X-ray diffraction method

309

Fatigue damage evaluation of a power plant component from analysis of the dislocation structures

310

Fatigue damage evaluation of carbon fiber composite using aluminum foil based strain sensors

311

Fatigue damage evaluation of low-alloy steel welded joints in fusion zone and heat affected zone based on frequency response changes in gigacycle fatigue

312

Fatigue damage evaluation of notched specimens through resonance and anti-resonance data

313

Fatigue damage evolution in off-axis unidirectional CFRP

314

Fatigue damage evolution in SiC fiber-reinforced Ti-15-3 alloy matrix composite

315

Fatigue damage evolution in SiC fiber-reinforced Ti-15-3 alloy matrix composite

316

Fatigue damage in a unidirectional SiC/Al composite due to push-pull and zero-pull loading

317

Fatigue damage in a unidirectional SiC/Al composite due to push-pull and zero-pull loading

318

Fatigue damage in aircraft structures, not wanted, but tolerated?

319

Fatigue damage in cancellous bone: An experimental approach from continuum to micro scale

320

Fatigue damage in carbon black filled natural rubber under uni- and multiaxial loading conditions

321

Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold

322

Fatigue damage in nickel and copper single crystals at nanoscale

323

Fatigue damage in titanium-graphite hybrid laminates

324

Fatigue damage initiation and growth from artificial defects in Zr-based metallic glass Original Research Article

325

Fatigue damage leads to a serious traffic accident

326

Fatigue Damage Mechanism of Oil Film Bearing Sleeve Original Research Article

327

Fatigue damage mechanisms associated with ʹtear-dropʹ cracking in UDIMET 720

328

Fatigue damage mechanisms in advanced hybrid titanium composite laminates

329

Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30

330

Fatigue damage mechanisms of copper single crystal/Sn–Ag–Cu interfaces

331

Fatigue damage model based on the natural frequency changes for spot-welded joints

332

Fatigue damage model for injection-molded short glass fibre reinforced thermoplastics

333

Fatigue damage modeling in solder interconnects using a cohesive zone approach

334

Fatigue damage modelling of adhesively bonded joints under variable amplitude loading using a cohesive zone model

335

Fatigue damage modelling of composite materials

336

Fatigue damage monitoring in polymeric composites using multiple fiber bragg gratings

337

Fatigue damage of GFRP laminates consisting of stitched unit layers

338

Fatigue damage of high performance concrete through a 2D mesoscopic lattice model

339

Fatigue damage of human tendons

340

Fatigue damage of medium carbon steel under sequential application of axial and torsional loading

341

Fatigue damage of stainless steel diffusion-bonded joints

342

Fatigue Damage of Steel Bridges Due to Dynamic Vehicle Loads

343

Fatigue damage of ultrafine-grain copper in very-high cycle fatigue region

344

Fatigue Damage, Remodeling, and the Minimization of Skeletal Weight

345

Fatigue damage-fracture mechanics interaction in cortical bone

346

Fatigue data acquisition, evaluation and optimization of district heating pipes

347

Fatigue Data Editing Algorithm for Automotive Applications

348

Fatigue deformation characteristic of as-extruded AM30 magnesium alloy

349

Fatigue Delamination Behavior of GFRP Composites under Mixed-Mode I/II Loading

350

Fatigue delamination behaviour of unidirectional carbon fibre/epoxy laminates reinforced by Z-Fiber® pinning

351

Fatigue delamination growth rates and thresholds of composite laminates under mixed mode loading

352

Fatigue design allowables for GRP laminates based on stiffness degradation measurements

353

Fatigue design factors for ECAPed materials

354

Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem

355

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of rf=1 mm

356

Fatigue design of cast steel nodes in tubular bridge structures

357

Fatigue design of complex welded structures

358

Fatigue design of highly loaded short-glass-fibre reinforced polyamide parts in engine compartments

359

Fatigue design of lattice materials via computational mechanics: Application to lattices with smooth transitions in cell geometry

360

Fatigue design of mills

361

FATIGUE DESIGN OF SPOT-WELDED AUSTENITIC AND DUPLEX STAINLESS SHEET STEELS

362

Fatigue design of structural ceramic parts by the example of automotive intake and exhaust valves

363

Fatigue design of structures under thermomechanical loadings

364

Fatigue design of welded aluminum rectangular hollow section joints

365

Fatigue design of welded joints from the wrought magnesium alloy AZ31 by the local stress concept with the fictitious notch radii of rf = 1.0 and 0.05 mm

366

Fatigue design of welded pipe penetrations in plated structures

367

Fatigue design of welded very thin-walled SHS-to-plate joints under in-plane bending

368

Fatigue design of wire-wound pressure vessels using ASME-API 579 procedure

369

Fatigue design with cast magnesium alloys under constant and variable amplitude loading

370

Fatigue due to hypocalcaemia

371

Fatigue Due to Multiple Sclerosis: A Comparison Between Persian Medicine and Conventional Medicine

372

Fatigue during prolonged exercise

373

Fatigue during repeated eccentric-concentric and pure concentric muscle actions of the plantar flexors

374

Fatigue effect of WC coatings thermal sprayed by HVOF and laser treated, on medium carbon steel

375

Fatigue Effect on Linear Center of Pressure Measures during Gait in People with Flat Feet

376

Fatigue endurance and crack propagation under rotating bending fatigue tests on aluminum alloy AISI 6063-T5 with controlled corrosion attack

377

Fatigue endurance of Ti-6Al-4V alloy with electro-eroded surface for improved bone in-growth

378

Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete

379

Fatigue enhancement of concrete beam with ECC layer

380

Fatigue evaluation and dynamic mechanical thermal analysis of sisal fibre–thermosetting resin composites

381

Fatigue Evaluation in Hot and Warm Mix Asphalts Based on Dissipated Energy

382

Fatigue evaluation of highway bridges

383

Fatigue evaluation of surface coated railway rails using shakedown theory, finite element calculations, and lab and field trials

384

Fatigue extrusions, slip band cracking and a novel hybrid concept for fatigue crack closure close to the crack tip

385

Fatigue failure analysis of a leg press exercise machine

386

Fatigue failure analysis of a specific total hip prosthesis stem design

387

Fatigue failure analysis of a spring for elevator doors

388

Fatigue failure analysis of anti-vibration rubber spring

389

Fatigue failure analysis of copper pressure conduit

390

Fatigue failure analysis of holding U-bolts of a cooling fan blade

391

Fatigue failure analysis of last stage blade in a low pressure steam turbine

392

Fatigue Failure Analysis of Trailing Arm Using Numerical Methods

393

Fatigue failure and skeletal evolution

394

Fatigue failure assessment of engineering components under service loading conditions

395

Fatigue failure assessment under stress gradients using small crack fatigue concepts

396

Fatigue failure behavior of glass/epoxy ±55 filament wound pipes under internal pressure

397

Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints

398

Fatigue failure characteristics of lead zirconate titanate piezoelectric ceramics

399

Fatigue failure criteria and degradation rules for composites under multiaxial loadings

400

Fatigue failure in the cement mantle of a simplified acetabular replacement model

401

Fatigue failure investigation on anti-vibration springs

402

Fatigue failure mechanisms of short glass-fiber reinforced nylon 66 based on nonlinear dynamic viscoelastic measurement

403

Fatigue failure of a bar of a twin-screw extruder for plastics

404

Fatigue failure of a boiler feed pump rotor shaft

405

Fatigue failure of a centrifugal compressor

406

Fatigue failure of a compressor blade

407

Fatigue failure of a connecting rod

408

Fatigue failure of a fillet welded nozzle joint

409

Fatigue failure of a helical gear in a gearbox

410

Fatigue failure of a hollow power transmission shaft

411

Fatigue failure of a hydraulic filter head

412

Fatigue failure of a rear axle shaft of an automobile

413

Fatigue failure of a rotating chemical vessel

414

Fatigue failure of a shoulder hemiarthroplasty stem: a case report

415

Fatigue failure of a Slickline wire induced by corrosion pits

416

Fatigue failure of a stainless steel wires used in a hydraulic pressure line

417

Fatigue failure of a star–ratchet gear

418

Fatigue failure of adhesively patched 2024-T3 and 7075-T6 clad and bare aluminium alloys

419

Fatigue failure of aircraft components

420

Fatigue failure of all-steel and steel–silicon nitride rolling ball combinations

421

Fatigue failure of an aircraft wings due to fitting error in hi-locks

422

Fatigue failure of an F/A-18 fin retainer spring

423

Fatigue failure of an offshore condensate recycle line in a natural gas production field

424

Fatigue failure of an orthopedic implant – A locking compression plate

425

Fatigue failure of as-received and retrieved NiTi orthodontic archwires

426

Fatigue failure of helical compression spring in coke oven batteries

427

Fatigue failure of sandwich beams with face sheet wrinkle defects

428

Fatigue failure of short glass fibre reinforced PA 6.6 structural pieces for railway track fasteners

429

Fatigue failure of steel links operating as chain components in a heavy duty draw bench

430

Fatigue failure of suspension arm: experimental analysis and multiaxial criterion

431

Fatigue failure of the de Havilland comet I

432

Fatigue failure of weld joint of afterburner fuel manifold of a jet engine

433

Fatigue failure of welded vertical members of a steel truss bridge

434

Fatigue failure ofhold-down bolts for a hydraulic cylindergland

435

Fatigue failure prediction of a rear axle housing prototype by using finite element analysis

436

Fatigue failure prediction of press fitted parts subjected to a cyclic loading condition by finite element methods

437

Fatigue failure predictions for steels in the very high cycle region – A review and recommendations

438

Fatigue failures of bar-attachment brazed joints for implant-supported overdentures

439

Fatigue failures of welded conveyor drums

440

Fatigue fracture at copper bicrystal interfaces: fractography

441

Fatigue fracture at copper bicrystal interfaces: fractography

442

Fatigue fracture behavior of a single-slip-oriented Fe-35 wt.% Cr alloy single crystal containing fine-scale Cr-rich precipitates

443

Fatigue fracture criteria and microstructures of magnesium alloy plates

444

Fatigue fracture expertise of train engine crankshafts

445

Fatigue fracture in plates in tension and out-of-plane shear

446

Fatigue Fracture in VNS-25 Stainless Steel

447

Fatigue fracture mechanisms of Cu/lead-free solders interfaces

448

Fatigue fracture of a aircraft canopy lever reverse

449

Fatigue fracture of a main landing gear swinging lever in a civil aircraft

450

Fatigue fracture of a nose landing gear in a military transport aircraft

451

Fatigue fracture of a weld on a weight training frame

452

Fatigue fracture of AMg6N alloy under loading at sound frequencies

453

Fatigue fracture of an AMX aircraft main wheel

454

Fatigue fracture of crankshaft of an aircraft engine

455

Fatigue fracture of embedded copper conductors in multifunctional composite structures

456

Fatigue fracture of SnAgCu solder joints by microstructural modeling

457

Fatigue fracture of tungsten monofilament-reinforced monocrystalline copper matrix composites

458

Fatigue fracture of tungsten monofilament-reinforced monocrystalline copper matrix composites

459

Fatigue fracture planes and expected principal stress directions under biaxial variable amplitude loading

460

Fatigue Fracture Strength of Implant-Supported Full Contour Zirconia and Metal Ceramic Fixed Partial Dentures

461

Fatigue Fracture Toughness of Metals and Alloys. Part 1. Experimental Procedures and Materials and General Principles

462

Fatigue Fracture Toughness of Metals and Alloys. Part 2. The Influence of Service and Manufacturing Factors

463

Fatigue from defect under multiaxial loading: Defect Stress Gradient (DSG) approach using ellipsoidal Equivalent Inclusion Method

464

Fatigue growth of a surface crack in a welded T-joint

465

Fatigue growth of internal flaw: Simulation of subsurface crack penetration to the surface of the structure

466

Fatigue growth of matrix cracks in the transverse direction of CFRP laminates

467

Fatigue growth of short cracks in Ti-17: Experiments and simulations

468

Fatigue growth simulation of part-through flaws in thick-walled pipes under rotary bending

469

Fatigue history and in-situ loading studies of the overload effect using high resolution X-ray strain profiling

470

Fatigue hysteresis behavior of cross-ply C/SiC ceramic matrix composites at room and elevated temperatures

471

Fatigue hysteresis behavior of unidirectional C/SiC ceramic–matrix composite at room and elevated temperatures

472

Fatigue improvement in low temperature plasma nitrided Ti–6Al–4V alloy

473

Fatigue improvement in modified lead zirconate titanate ceramics through employment of La0.8Sr0.2MnO3 buffer layers

474

Fatigue in advanced cancer — meaning before measurement?

475

Fatigue in aluminum–steel and steel–steel composite foams

476

Fatigue in cemented acetabular replacements

477

Fatigue in engine connecting rod bolt due to forming laps

478

Fatigue in ferroelectric ceramics due to cluster growth

479

Fatigue in laser shock peened open-hole thin aluminium specimens

480

Fatigue in martensitic 100Cr6: Relationship between rolling contact fatigue microstructural transitions and repetitive push testing

481

Fatigue in mothers of infants discharged to the home on apnea monitors

482

Fatigue in Multiple Sclerosis Patients and Nursing Care

483

Fatigue in multiple sclerosis: a short clinical update

484

Fatigue in multiple sclerosis: Reciprocal relationships with physical disabilities and depression

485

Fatigue in neurological disorders

486

Fatigue in older adults with stable heart failure

487

Fatigue in patients with cancer and chronic obstructive airways disease: a phenomenological enquiry Original Research Article

488

Fatigue in patients with diabetes: A review

489

Fatigue in porous PMMA: The effect of stress concentrations

490

Fatigue in Progressive Neurological Conditions: A literature Review

491

Fatigue in relatives of palliative patients

492

Fatigue in the chronic fatigue syndrome: A cognitive phenomenon?

493

Fatigue in the general norwegian population: normative data and associations

494

Fatigue in the shell of a conveyor drum

495

Fatigue in the workforce of national health service trusts: Levels of symptomatology and links with minor psychiatric disorder, demographic, occupational and work role factors

496

Fatigue in thin films: lifetime and damage formation

497

Fatigue in thin films: lifetime and damage formation

498

Fatigue in Ti–6Al–4V–B alloys Original Research Article

499

Fatigue initiation and propagation in natural and synthetic rubbers

500

Fatigue initiation behaviour throughout friction stir welded joints in AA2024-T3

501

Fatigue initiation in C35 steel: Influence of loading and defect

502

Fatigue initiation in fibre metal laminates

503

Fatigue initiation in railway wheels—a numerical study of the influence of defects

504

Fatigue issues for life extension and license renewal Original Research Article

505

Fatigue laser-induced damage in transparent materials

506

Fatigue laser-induced damage in transparent materials

507

Fatigue liée au cancer : un symptôme souvent négligé

508

Fatigue liée au cancer : un symptôme souvent négligé

509

Fatigue life analysis and predictions for NR and SBR under variable amplitude and multiaxial loading conditions

510

Fatigue life analysis of a cannon barrel

511

Fatigue Life Analysis of Bus Body based on User Target Load Spectrum

512

Fatigue life analysis of fiber reinforced concrete with a fracture mechanics based model

513

Fatigue life analysis of fiber reinforced concrete with a fracture mechanics based model

514

Fatigue Life Analysis of the Propeller Shafting System of a VLCC Ship Powertrain System Using Finite Element or Distributed-Lumped Methods

515

Fatigue life and backface strain predictions in adhesively bonded joints

516

FATIGUE LIFE AND CRACK PATH PREDICTION IN 2D STRUCTURAL COMPONENTS USING AN ADAPTIVE FINITE ELEMENT STRATEGY

517

Fatigue life and crack path predictions in generic 2D structural components

518

Fatigue life and cyclic softening behavior of JLF-1 steel

519

Fatigue life and failure modes of crowns systems with a modified framework design

520

Fatigue life and failure modes of crowns systems with a modified framework design

521

Fatigue life and fatigue crack propagation behavior of JLF-1 steel

522

Fatigue life and mechanical behaviors of bearing steel by nitrogen plasma immersion ion implantation

523

Fatigue life and microstructure of ODS steels

524

Fatigue life and plastic deformation behavior of electrodeposited copper thin film under variable amplitude loading

525

Fatigue life and plastic deformation behavior of electrodeposited copper thin films

526

Fatigue life and strain hardening behavior of JLF-1 steel

527

Fatigue Life Assessment for an Aluminum Alloy Piston Using Stress Gradient Approach Described in the FKM Method

528

Fatigue life assessment for metal alloys under nonproportional low-cycle loading

529

Fatigue life assessment for welded structures without initial defects: an algorithm for predicting fatigue crack growth from a sound site

530

Fatigue life assessment in non-Gaussian random loadings

531

Fatigue life assessment of an innovative laptop hinge

532

Fatigue life assessment of cardiovascular balloon-expandable stents: A two-scale plasticity–damage model approach

533

Fatigue Life Assessment of Composite Airplane Wing Subjected to Variable Mechanical and Thermal Loads

534

FATIGUE LIFE ASSESSMENT OF HIGH-STRENGTH, LOWALLOY STEEL AT HIGH FREQUENCY

535

Fatigue life assessment of improved joints welded with alternative welding techniques

536

Fatigue life assessment of nodular cast iron containing casting defects

537

Fatigue life behaviour of the dual-phase low carbon steel sheets

538

Fatigue life calculation by means of the cycle counting and spectral methods under multiaxial random loading

539

Fatigue life calculation of SAE 1050 and SAE 1065 steel under random loading

540

Fatigue life distribution and size effect in ductile cast iron for wind turbine components

541

Fatigue life duration prediction for welded spots by volumetric method

542

Fatigue life enhancement of aluminium joints through mechanical and thermal prestressing

543

Fatigue life enhancement of aluminum alloy for aircraft by Fine Particle Shot Peening (FPSP)

544

Fatigue life estimation after crack repair in 6005 A-T6 aluminium alloy using the cold expansion hole technique

545

Fatigue life estimation for internal threads in class 1 components

546

Fatigue life estimation for internal threads in class 1 components

547

Fatigue life estimation for ITER CS conductor jacket by probabilistic fracture mechanics

548

Fatigue life estimation in dental implants

549

Fatigue life estimation models: a state of the art

550

Fatigue life estimation of an engine rubber mount

551

Fatigue life estimation of bolt clamped and interference fitted-bolt clamped double shear lap joints using multiaxial fatigue criteria

552

Fatigue life estimation of notched elements with use of non-local volumetric method

553

Fatigue life estimation of spot welds using a crack propagation-based method with consideration of residual stresses effect

554

Fatigue life estimation of steel girder of Yangpu cable-stayed Bridge due to buffeting

555

Fatigue life estimation of steel girder of Yangpu cable-stayed Bridge due to buffeting

556

Fatigue life estimation parameter for short and medium span steel highway girder bridges

557

Fatigue life estimation under variable amplitude bending using the non-local damage parameter and multisurface plasticity model

558

Fatigue life evaluation accuracy of power devices using finite element method

559

Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes

560

Fatigue life evaluation for carbon/epoxy laminate composites under constant and variable block loading

561

Fatigue life evaluation for multi-spot welded structures

562

Fatigue life evaluation of 42CrMo4 nitrided steel by local approach: Equivalent strain-life-time

563

Fatigue life evaluation of a single crystal Ni-base superalloy, accompanying with change of microstructural morphology

564

Fatigue life evaluation of a through-girder steel railway bridge

565

Fatigue life evaluation of adhesively bonded scarf joints

566

Fatigue life evaluation of aligned plant fibre composites through S–N curves and constant-life diagrams

567

Fatigue Life Evaluation of Concrete Bridge Deck Slabs Reinforced with Glass FRP Composite Bars

568

Fatigue Life Evaluation of Friction Stir Welded 7075-T651 Aluminum Alloy Joints

569

Fatigue life evaluation of high pressure hydrogen storage vessel

570

Fatigue Life Evaluation of Single and Two Riveted Coach Peel Joints Using Strain-Life Criteria

571

Fatigue life evaluation of welded joints under combined normal and shear stress cycles

572

Fatigue life extension by electroless nickel infiltration plating

573

Fatigue life extension of notches in AISI 304L weldments using deep cryogenic treatment

574

Fatigue life improvement in fatigue-aged fastener holes using the cold expansion technique

575

Fatigue life improvement of AISI 304L cruciform welded joints by cryogenic treatment

576

Fatigue life improvement of drill collars through control of bore eccentricity

577

Fatigue life improvement of mig welded aluminium T-joints by friction stir processing

578

Fatigue life improvement of α-titanium by novel ultrasonically assisted technique

579

Fatigue life methodology for tapered hybrid composite flexbeams

580

Fatigue life of 63Sn–37Pb solder related to load drop under uniaxial and torsional loading

581

Fatigue life of a friction welded joint with a circular crack in the centre

582

Fatigue life of ablation-cast 6061-T6 components

583

Fatigue life of an aerospace aluminium alloy subjected to cold expansion and a cyclic temperature regime

584

Fatigue life of cast Inconel 713LC with/without protective diffusion coating under bending, torsion and their combination

585

Fatigue life of cold-forging dies with various values of hardness

586

Fatigue Life of Extended Hollobolt Connection in Concrete Filled Tube

587

Fatigue life of fine-grain Al–Mg–Sc alloys produced by equal-channel angular pressing

588

Fatigue Life of Girders with Trapezoidal Corrugated Webs

589

Fatigue life of girders with trapezoidally corrugated webs: An experimental study

590

Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel

591

Fatigue life of reinforced concrete beams under bending strengthened with composite materials

592

Fatigue Life of Repaired Welded Tubular Joints

593

Fatigue life of steel notched elements including the complex stress state

594

Fatigue life of subgrade in the cone of disturbance following an underground explosion

595

Fatigue life of the plasma-facing components in PULSAR

596

Fatigue life of Ti–50 at.% Ni and Ti–40Ni–10Cu (at.%) shape memory alloy wires

597

Fatigue life of Ti–50 at.% Ni and Ti–40Ni–10Cu (at.%) shape memory alloy wires

598

Fatigue Life of Welded Joint Improvement with Various Welding Principles and Shot Peening process for AISI 1020 Low Carbon Steel

599

Fatigue life of welded joints according to energy criteria in the critical plane

600

Fatigue life prediction and failure analysis of a gas turbine disc using the finite-element method

601

Fatigue life prediction and load cycle elimination during spectrum loading of composites

602

Fatigue life prediction and optimum topology design of EPDM weather strip

603

FATIGUE LIFE PREDICTION BASED ON MACROSCOPIC PLASTIC ZONE ON FRACTURE SURFACE OF AISI-SAE 1018 STEEL

604

Fatigue life prediction based on natural frequency changes for spot welds under random loading

605

Fatigue life prediction based on variable amplitude tests—methodology

606

Fatigue life prediction based on variable amplitude tests—specific applications

607

Fatigue life prediction for a vessel sailing the North Atlantic route

608

Fatigue life prediction for broad-band multiaxial loading with various PSD curve shapes

609

Fatigue life prediction for stainless steel welded plate CCT geometry based on Lawrenceʹs local-stress approach

610

Fatigue life prediction for toe ground welded joints

611

Fatigue life prediction in AlMgSi1 lap joint weldments

612

Fatigue life prediction in composites using progressive damage modelling under block and spectrum loading

613

Fatigue life prediction in the damaged and un-damaged compressor blades

614

Fatigue life prediction of 3-D problems by damage mechanics with two-block loading

615

Fatigue life prediction of a heavy vehicle steel wheel under radial loads by using finite element analysis

616

Fatigue life prediction of a rubber mount based on test of material properties and finite element analysis

617

Fatigue life prediction of a stainless steel plate-fin structure using equivalent-homogeneous-solid method

618

Fatigue life prediction of adhesive joint in heat sink using Monte Carlo method

619

Fatigue life prediction of adhesively bonded single lap joints

620

Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM

621

Fatigue life prediction of carbon/epoxy laminates by stochastic numerical simulation

622

Fatigue life prediction of circular notched CFRP laminates

623

Fatigue life prediction of circular notched CFRP laminates

624

Fatigue life prediction of complex 2D components under mixed-mode variable amplitude loading

625

Fatigue life prediction of composite laminates by FEA simulation method

626

Fatigue life prediction of composite materials using polynomial classifiers and recurrent neural networks

627

Fatigue life prediction of copper single crystals using a critical plane approach

628

Fatigue life prediction of corrosion-damaged high-strength steel using an equivalent stress riser (ESR) model. Part II: Model development and results

629

Fatigue life prediction of corrosion-damaged high-strength steel using an equivalent stress riser (ESR) model: Part I: Test development and results

630

Fatigue life prediction of cross-ply composite laminates

631

Fatigue life prediction of cross-ply composite laminates

632

Fatigue life prediction of gas tungsten arc welded AISI 304L cruciform joints with different LOP sizes

633

Fatigue life prediction of GTA welded AISI 304L cruciform joints with lack of penetration using local-stress approach

634

Fatigue life prediction of laminated polymer matrix composites

635

Fatigue life prediction of load carrying cruciform joints of pressure vessel steel by statistical tools

636

Fatigue life prediction of machined components using finite element analysis of surface topography

637

Fatigue life prediction of multi-spot-welded panel structures using an equivalent stress intensity factor

638

Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance

639

Fatigue life prediction of offshore tubular joints using fracture mechanics

640

Fatigue life prediction of parabolic leaf spring under various road conditions

641

Fatigue life prediction of RC beams strengthened with prestressed CFRP under cyclic bending loads

642

Fatigue life prediction of regulating valves on the intermediate-pressure section of a 400 MW steam turbine

643

Fatigue Life Prediction of Rivet Joints

644

Fatigue life prediction of sandwich composite materials under flexural tests using a Bayesian trained artificial neural network

645

Fatigue life prediction of semi-elliptical surface crack in 14MnNbq bridge steel

646

Fatigue life prediction of shot-peened steel

647

Fatigue Life Prediction of Single Crystals for Turbine Blade Applications

648

Fatigue Life Prediction of Single Crystals for Turbine Blade Applications

649

Fatigue life prediction of sintered steels

650

Fatigue life prediction of sintered steels

651

Fatigue life prediction of small notched Ti–6Al–4V specimens using critical distance

652

Fatigue life prediction of solder joints with consideration of frequency, temperature and cracking energy density

653

Fatigue life prediction of strength mis-matched high strength low alloy steel welds

654

Fatigue life prediction of sus 630 (H900) steel under high cycle loading

655

Fatigue Life Prediction of the Keel Structure of A Tsunami Buoy Using Spectral Fatigue Analysis Method

656

Fatigue life prediction of the metalwork of a travelling gantry crane

657

Fatigue life prediction of the modied asphalt mixtures with ANFIS modeling

658

Fatigue life prediction of the plates with an inclined surface crack

659

Fatigue life prediction of type 304 stainless steel under sequential biaxial loading

660

Fatigue life prediction of unidirectional glass fiber/epoxy composite laminae using neural networks

661

Fatigue life prediction of welded box structures

662

Fatigue life prediction of welded stiffened 350WT steel plates

663

Fatigue life prediction of ZE41A magnesium alloy using Weibull distribution

664

Fatigue life prediction under complex loading for XAS/914 CFRP incorporating a mechanical fastener

665

Fatigue life prediction under conditions where cyclic creep–fatigue interaction occurs

666

Fatigue life prediction under cyclic thermal loads using the boundary elements method for two-dimensional problems

667

Fatigue life prediction under variable loading based on a new damage model

668

Fatigue life prediction under variable loading based on a new non-linear continuum damage mechanics model

669

Fatigue life prediction under wide band random loading

670

Fatigue life prediction using 2-scale temporal asymptotic homogenization

671

Fatigue life prediction: A comparative study for a three layer EN45A parabolic leaf spring

672

Fatigue life prediction: A Continuum Damage Mechanics and Fracture Mechanics approach

673

Fatigue life predictions by integrating EVICD fatigue damage model and an advanced cyclic plasticity theory

674

Fatigue life predictions in polymer particle composites

675

Fatigue life predictions including the Bauschinger effect

676

Fatigue life predictions of porous composite paper coatings

677

Fatigue life predictions of spot welds using coarse FE meshes

678

Fatigue life predictions using fracture mechanics methods

679

Fatigue life recovery in aluminium alloy aircraft structure

680

Fatigue life retro estimation of wing structure under different load spectra

681

Fatigue life scatter in 7xxx series aluminum alloys

682

Fatigue life scatter of aluminium alloy helicopter lugs

683

Fatigue life simulation of a rear tow hook assembly of a passenger car

684

Fatigue life simulation of multi-axial CFRP laminates considering material non-linearity

685

Fatigue life time prediction of PoAF Epsilon TB-30 aircraft – Implementation of automatic crack growth based on 3D finite element method

686

Fatigue life under along-wind loading — closed-form solutions

687

Fatigue life under non-Gaussian random loading from various models

688

Fatigue life variability due to variations in interference fit of steel bushings in 7075-T651 aluminum lugs

689

Fatigue lifetime estimation of commercial vehicles

690

Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadings

691

Fatigue lifetime of repaired high heat flux components for ITER divertor

692

Fatigue lifetime of welded joints under random loading: rainflow cycle vs. cycle sequence method

693

Fatigue lifetime under stochastic loading with random overloading pulse trains Original Research Article

694

Fatigue lifetime under uniaxial random loading with different mean values according to some selected models

695

Fatigue limit – Material property as an opened or closed system? Practical view on the aircraft components failures in GCF area

696

Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation

697

Fatigue limit assessment on seamless tubes in presence of inhomogeneities: Small crack model vs. full scale testing experiments

698

Fatigue limit estimated using finite lives

699

Fatigue limit evaluation of notches, small cracks and defects: an engineering approach

700

Fatigue limit in fused silica

701

Fatigue limit investigation of 6061-T6 aluminum alloy in giga-cycle regime

702

FATIGUE LIMIT OF BLUNT-NOTCHED COMPONENTS

703

Fatigue limit of new precipitation-hardened aluminium alloy with distinct fatigue crack propagation limit

704

Fatigue limit of recycled aggregate concrete

705

Fatigue limit of steel with an arbitrary crack under a stress controlled constant with a positive mean stress

706

Fatigue limit prediction of notched components using short crack growth theory and an asymptotic interpolation method

707

Fatigue limit reliability of axisymmetric complex surface

708

Fatigue limit state based on alarm thresholds for rail with machine learning

709

Fatigue limit under multiaxial loadings: on the definition of the equivalent shear stress

710

Fatigue limits for notches of arbitrary profile

711

Fatigue limits of enamel bonds with moist and dry techniques

712

Fatigue limits prediction of surface treated materials

713

Fatigue lives for induction hardened shafts with subsurface crack initiation

714

Fatigue lives of 18G2A and 10HNAP steels under variable amplitude and random non-proportional bending with torsion loading

715

Fatigue lives of friction stir spot welds in aluminum 6061-T6 sheets

716

Fatigue loading and R-curve behavior of a dental glass-ceramic with multiple flaw distributions

717

Fatigue loading parameter identification of a wind turbine operating in complex terrain

718

Fatigue loading parameter identification of a wind turbine operating in complex terrain

719

Fatigue loads for wind turbines operating in wakes

720

Fatigue loads for wind turbines operating in wakes

721

Fatigue loads on wind turbines of different control strategies operating in complex terrain

722

Fatigue mechanism in Ni3Fe single crystals with L12 superlattice structure Original Research Article

723

Fatigue Mechanism of Photochromic l,2-Bis(3-thienyl)perfluorocyclopentene

724

Fatigue mechanisms in an austenitic steel under cyclic loading: Experiments and atomistic simulations

725

Fatigue mechanisms in an interstitial free steel: analysis through the behaviour of UHP α-iron doped with C and Mn

726

Fatigue mechanisms in an interstitial free steel: analysis through the behaviour of UHP α-iron doped with C and Mn

727

Fatigue Model for Fiber-Reinforced Polymeric Composites

728

Fatigue modeling for aircraft structures containing natural exfoliation corrosion

729

Fatigue modeling of materials with complex microstructures

730

Fatigue modeling of short fiber reinforced composites with ductile matrix under cyclic loading

731

Fatigue modelling in fretting contact with a crystal plasticity model

732

Fatigue monitoring and life cycle analysis of a recuperative heat exchanger in the primary circuit Original Research Article

733

Fatigue notch factor and short crack propagation

734

Fatigue Notch Factor in Steel Bridges Due to Corrosion

735

Fatigue notch sensitivity and the notch size effect

736

Fatigue notch sensitivity of steel blunt-notched specimens

737

Fatigue notch sensitivity of ultrafine-grained copper

738

Fatigue notch sensitivity of ultrafine-grained copper

739

Fatigue of 1 μm-scale gold by vibration with reduced resonant frequency

740

Fatigue of 2024-T351 aluminium alloy at different load ratios up to 1010 cycles

741

Fatigue of 7075-T651 aluminum alloy

742

Fatigue of 7075-T651 aluminum alloy under constant and variable amplitude loadings

743

Fatigue of a laterally constrained closed cell aluminum foam Original Research Article

744

Fatigue of alumina under contact loading

745

Fatigue of an aluminium cast alloy used in the manufacture of automotive engine blocks

746

Fatigue of as-extruded 7005 aluminum alloy

747

Fatigue of as-extruded AZ61A magnesium alloy

748

Fatigue of as-extruded AZ61A magnesium alloy

749

Fatigue of beta titanium alloy at 20, 482 and 648 °C

750

Fatigue of biomaterials: a review

751

Fatigue of biomaterials: Hard tissues

752

Fatigue of bonded steel interfaces under cyclic shear loading and static normal stress

753

Fatigue of C/C composites in bending and in shear modes Original Research Article

754

Fatigue of cantilevered pipe fittings subjected to vibration

755

Fatigue of casting flaws at a notch root under an SAE service load history

756

Fatigue of cemented hip replacements under torsional loads

757

Fatigue of clamped connections with application to a stem-handlebar assembly for off-road bicycles

758

Fatigue of composites for wind turbines

759

Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C

760

Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C

761

Fatigue of deep rolled AlMg4.5Mn (AA5083) in the temperature range 20–300 °C

762

Fatigue of dental ceramics

763

Fatigue of dental ceramics

764

Fatigue of dentin–composite interfaces with four-point bend

765

Fatigue of duplex stainless steel influence of discontinuous, spinodally decomposed ferrite

766

Fatigue of duplex stainless steel influence of discontinuous, spinodally decomposed ferrite

767

Fatigue of enamel bonds with self-etch adhesives

768

Fatigue of friction stir welds in aluminium alloys that contain root flaws

769

Fatigue of glass/epoxy composite in three-point-bending with predominant shearing

770

Fatigue of hard metals and cermets

771

Fatigue of hard metals and cermets

772

Fatigue of high strength steel joints welded with low temperature transformation consumables

773

Fatigue of highly strengthened Cu–Ag alloys

774

Fatigue of honeycombs under in-plane multiaxial loads

775

Fatigue of honeycombs under in-plane multiaxial loads

776

Fatigue of hybrid (adhesive/bolted) joints in SRIM composites

777

Fatigue of hybrid (adhesive/bolted) joints in SRIM composites

778

Fatigue of isotropic open-cell foams under multiaxial loads

779

Fatigue of Low-Carbon and Low-Alloyed Steels for the Automotive Industry. Part 1. The Influence of Stress Concentration and Fretting on Fatigue Life of Full-Scale Automobile Wheels and Specimens

780

Fatigue of Low-Carbon and Low-Alloyed Steels for the Automotive Industry. Part 2. Estimation of the Fretting Effect on Fatigue Life by Measuring Electric Microcurrents in the Contact and Sliding Zone

781

Fatigue of materials used in microscopic components

782

Fatigue of metallic microdevices and the role of fatigue-induced surface oxides Original Research Article

783

Fatigue of mineralized tissues: Cortical bone and dentin

784

Fatigue of multiscale composites with secondary nanoplatelet reinforcement: 3D computational analysis

785

Fatigue of notched case-hardened specimens of steel SAE 5120 in the VHCF regime and application of the weakest-link concept

786

Fatigue of NPP Components and Piping under Service Conditions

787

Fatigue of orthodontic nickel–titanium (NiTi) wires in different fluids under constant mechanical stress

788

Fatigue of orthodontic nickel–titanium (NiTi) wires in different fluids under constant mechanical stress

789

Fatigue of packable dental composites

790

Fatigue of particle-and whisker-reinforced metal-matrix composites

791

Fatigue of piston rod caused by unsteady, unbalanced, unsynchronized blade torques in a Kaplan turbine

792

Fatigue of polycrystalline copper with different grain sizes and texture

793

Fatigue of railway wheels and rails under rolling contact and thermal loading—an overview

794

Fatigue of reinforced concrete beams strengthened with externally post-tensioned CFRP tendons

795

Fatigue of reinforced-polyurethane-based, sheet metal forming dies

796

Fatigue of selected GRP composite components and joints with damage evaluation

797

Fatigue of self-piercing riveted joints in aluminum alloy 6111

798

Fatigue of shot peened 7075-T7351 SENB specimen – A 3-D analysis

799

Fatigue of single- and double-rivet self-piercing riveted lap joints

800

Fatigue of single crystalline silicon: Mechanical behaviour and TEM observations

801

Fatigue of sisal fibre reinforced composites: Constant-life diagrams and hysteresis loop capture

802

Fatigue of specimens subjected to combined loading. Role of hydrostatic pressure

803

Fatigue of stress corrosion cracks in X65 pipeline steels

804

Fatigue of structures and materials in the 20th century and the state of the art

805

Fatigue of structures and secondary bending in structural elements

806

Fatigue of the bone/cement interface and loosening of total joint replacements

807

Fatigue of the resin–dentin interface: A new approach for evaluating the durability of dentin bonds

808

Fatigue of the resin–enamel bonded interface and the mechanisms of failure

809

Fatigue of web-flange weld of corrugated web girders: 1. Influence of web corrugation geometry and flange geometry on web-flange weld toe stresses

810

Fatigue of web-flange weld of corrugated web girders: 2. Analytical evaluation of fatigue strength of corrugated web-flange weld

811

Fatigue of welded aluminium hollow section profiles

812

Fatigue of welded steel joints under wideband loadings

813

Fatigue of zirconia and dental bridge geometry: Design implications

814

Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges

815

Fatigue of ZK60 magnesium alloy under uniaxial loading

816

Fatigue on engine pistons – A compendium of case studies

817

Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti–29Nb–13Ta–4.6Zr

818

Fatigue performance characterisation of resistance-welded thermoplastic composites

819

Fatigue performance evaluation of SBS modified mastic asphalt mixtures

820

Fatigue performance evaluation of selective laser melted Ti–6Al–4V

821

Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening Original Research Article

822

Fatigue performance of a bonded wavy composite lap joint

823

Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying

824

Fatigue performance of adhesively bonded connections in GRE pipes

825

Fatigue performance of gussasphalt concrete made from modified AH-70# asphalt

826

Fatigue performance of low temperature nitrided AISI 321 grade austenitic stainless steel

827

Fatigue performance of metallic beam strengthened with a bonded CFRP plate

828

Fatigue performance of plain and steel fibre reinforced self compacting concrete using S–N relationship

829

Fatigue performance of pre-strained pipes with girth weld defects: Full-scale experiments and analyses

830

Fatigue performance of pre-strained pipes with girth weld defects: Local deformation mechanisms under bending

831

Fatigue performance of production-quality aircraft fastener holes

832

Fatigue performance of pulsed current gas tungsten arc, friction stir and laser beam welded AZ31B magnesium alloy joints

833

Fatigue performance of reinforced concrete beams strengthened with CFRP sheets

834

Fatigue performance of sandwich beams with a pyramidal core

835

Fatigue performance of tensile steel members strengthened with CFRP plates

836

Fatigue performance of ultra-high-molecular-weight polyethylene: effect of gamma radiation sterilization

837

Fatigue performance of weldbonded high strength sheet steels tested in Arctic, room temperature and tropical environments

838

Fatigue performance of weldbonded high strength sheet steels tested in Arctic, room temperature and tropical environments

839

Fatigue phenomena in explosively welded steel–titanium clad components subjected to push–pull loading

840

Fatigue prediction in fibrin poly-ε-caprolactone macroporous scaffolds

841

Fatigue prediction of spot welded joints using equivalent structural stress

842

Fatigue predictions of welded joints and the effective notch stress concept

843

Fatigue process zone at notches

844

Fatigue propagation threshold of short cracks under constant amplitude loading

845

Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals

846

Fatigue properties and failure characterization of spot welded high strength steel sheet

847

Fatigue properties in high strength bulk metallic glasses

848

Fatigue properties of 316 stainless steel and its failure due to internal cracks in low-cycle and extremely low-cycle fatigue regimes

849

Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing

850

Fatigue properties of a 316L stainless steel coated with different TiNx deposits

851

Fatigue properties of a 316L stainless steel coated with different ZrN deposits

852

Fatigue properties of a 4340 steel coated with a Colmonoy 88 deposit applied by high-velocity oxygen fuel

853

Fatigue properties of a Ck45 steel coated with a post-heat treated Ni–Cu–P electroless deposit

854

Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation

855

Fatigue properties of a S45C steel subjected to ultrasonic nanocrystal surface modification

856

Fatigue properties of a SAE 4340 steel coated with a Nimet HP autocatalytic nickel deposit

857

Fatigue properties of a SAE 4340 steel coated with TiCN by PAPVD

858

Fatigue properties of Al–1Mg–0.6Si foam at low and ultrasonic frequencies

859

Fatigue properties of Al-Mg alloys with and without scandium

860

Fatigue properties of Al-Mg alloys with and without scandium

861

Fatigue properties of aluminium foams at high numbers of cycles

862

Fatigue properties of aluminium foams at high numbers of cycles

863

Fatigue properties of arc-welded lap joints with weld start and end points

864

Fatigue properties of bovine compact bones that have different microstructures

865

Fatigue properties of carburized alloy steel in very high cycle regime under torsional loading

866

Fatigue properties of cold-rolled notched eutectoid steel

867

Fatigue properties of Cu–Cr in situ composite

868

Fatigue properties of ductile cast iron containing chunky graphite

869

Fatigue properties of F82H irradiated at 523 K to 3.8 dpa

870

Fatigue properties of Fe–Al intermetallic coatings prepared by plasma spraying

871

Fatigue properties of friction stir overlap welds

872

Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites

873

Fatigue properties of gas nitrided austenitic stainless steel pre-treated with fine particle peening

874

Fatigue properties of high nitrogen steels

875

Fatigue properties of inertia dissimilar friction-welded stainless steels

876

Fatigue properties of Keronite® coatings on a magnesium alloy

877

Fatigue properties of laser-brazed joints of Dual Phase and TRansformation Induced Plasticity steel with a copper–aluminium consumable

878

Fatigue properties of oriented PZT ferroelectric thin films

879

Fatigue properties of oxynitrocarburized medium carbon railway axle steel in very high cycle regime

880

Fatigue properties of polypropylene involute rack gear reinforced with metallic springs

881

Fatigue properties of rolled magnesium alloy (AZ31) sheet: Influence of specimen orientation

882

Fatigue properties of spray formed hypereutectic aluminium silicon alloy DISPAL® S232 at high and very high numbers of cycles

883

Fatigue Properties of Supersteel for Automobiles Original Research Article

884

Fatigue properties of the hot extruded magnesium alloy AZ31

885

Fatigue properties of the refurbished INCO-617 alloy

886

Fatigue properties of TiAl alloys

887

Fatigue properties of Ti-based hard coatings deposited onto tool steels

888

Fatigue properties of titanium alloy Ti–6Al–2Cb–1Ta–0.8Mo

889

Fatigue properties of titanium alloy Ti–6Al–2Cb–1Ta–0.8Mo

890

Fatigue properties of transformation-induced plasticity and dual-phase steels for auto-body lightweight: Experiment, modeling and application

891

Fatigue properties of two case hardening steels after carburization

892

Fatigue properties of type 316LN stainless steel in air and mercury

893

Fatigue properties of ultra-fine grained dual phase ferrite/martensite low carbon steel

894

Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing

895

Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing

896

Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing

897

Fatigue properties of zinc–aluminium alloys in 3.5% NaCl and 1% HCl solutions

898

Fatigue Properties under Constant Stress/Variable Stress Amplitude and Coaxing Effect of Acicular Ductile Iron and 42 CrMo4 Steel

899

Fatigue property of a bioabsorbable magnesium alloy with a hydroxyapatite coating formed by a chemical solution deposition

900

Fatigue Property of Hot Rolled and Cold Rolled Strips Original Research Article

901

Fatigue Property of Low Cost and High Strength Wheel Steel for Commercial Vehicle Original Research Article

902

Fatigue property of semisolid A357 aluminum alloy under different heat treatment conditions

903

Fatigue relevance of stratified flows in pipes: A parametric study

904

Fatigue reliability analysis of composite laminates under spectrum stress

905

Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection

906

Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection

907

Fatigue reliability analysis under two-stage loading

908

Fatigue reliability analysis under two-stage loading

909

Fatigue reliability assessment of a complex welded structure subjected to multiple cracks

910

Fatigue reliability assessment of an existing steel railroad bridge

911

Fatigue Reliability Assessment of Orthotropic Bridge Decks under Stochastic Truck Loading

912

Fatigue reliability assessment of retrofitted steel bridges integrating monitored data

913

Fatigue reliability assessment of riveted lap joint of aircraft structures

914

Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis

915

Fatigue reliability evaluation for composite laminates via a direct numerical integration technique

916

Fatigue reliability of a single stiffened ship hull panel

917

Fatigue reliability of a stiffened panel subjected to correlated crack growth

918

Fatigue reliability of the ship hull girder

919

Fatigue reliability of the ship hull girder accounting for inspection and repair

920

Fatigue reliability-based assessment of welded joints applying consistent fracture mechanics formulations

921

Fatigue reliability—measured response of the heidrun TLP tethers

922

Fatigue residual strength of circular laminate graphite–epoxy composite plates damaged by transverse load

923

Fatigue resistance analysis of tibial baseplate in total knee prosthesis—An in vitro biomechanical study

924

Fatigue resistance and crack propensity of large MOD composite resin restorations: Direct versus CAD/CAM inlays

925

Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres

926

Fatigue resistance and failure mechanisms of plasma-sprayed CrC–NiCr cermet coatings in rolling contact

927

Fatigue resistance and structural characteristics of fiber posts: three-point bending test and SEM evaluation

928

Fatigue resistance at variation of temperature-time factors

929

Fatigue resistance of composite joints with countersunk composite and metal fasteners

930

Fatigue resistance of composite restorations: Effect of filler content

931

Fatigue resistance of continuous glass fiber/polypropylene composites: consolidation dependence

932

Fatigue resistance of CrN thin films deposited by arc evaporation process on H11 tool steel and 2205 duplex stainless steel

933

Fatigue resistance of double sealant composed of polyisobutylene sealant adjacent to silicone sealant

934

Fatigue resistance of flat specimens containing a central hole obtained by nibbling

935

Fatigue resistance of PECVD coated steel alloy

936

Fatigue resistance of photochromic 2,2-diaryl-[2H]heteroannellated chromenes in solution

937

Fatigue resistance of plasma-sprayed CrC–NiCr cermet coatings in rolling contact

938

Fatigue Resistance of Powder Metallurgy Ti–6Al–4V Alloy

939

Fatigue resistance of SMA-martensite bars subjected to flexural bending

940

Fatigue resistance of SMA-martensite bars subjected to flexural bending

941

Fatigue resistance of SMA-martensite bars subjected to flexural bending

942

Fatigue resistance of steel and titanium PVD coated spur gears

943

Fatigue resistance of the grain size transition zone in a dual microstructure superalloy disk

944

Fatigue resistance of titanium laser and hybrid welded joints

945

Fatigue resistance of weld ends

946

Fatigue resistance of welded details enhanced by ultrasonic impact treatment (UIT)

947

Fatigue resistant silicon nitride ceramics due to anelastic deformation and energy dissipation

948

Fatigue response of thick section fiberglass/epoxy composites

949

Fatigue response of Udimet 720 following minimum damage wire electrical discharge machining

950

Fatigue scatter reduction through deep cryogenic treatment on the 18NiCrMo5 carburized steel

951

Fatigue sensitivity analysis using complex variable methods

952

Fatigue Severity and Sleep Disorders Among Patients With Multiple Sclerosis: A Cross-sectional Study From Iran

953

Fatigue short crack behaviour in metastable austenitic stainless steels with different grain sizes

954

Fatigue short crack behaviour in metastable austenitic stainless steels with different grain sizes

955

Fatigue simulation for titanium/CFRP hybrid laminates using cohesive elements

956

Fatigue softening of X10CrAl24 ferritic steel

957

Fatigue softening of X10CrAl24 ferritic steel

958

FATIGUE SPECIMENS FOR SHEET AND PLATE MATERIAL

959

Fatigue Strain and Damage Analysis of Concrete in Reinforced Concrete Beams under Constant Amplitude Fatigue Loading

960

Fatigue strength analysis of a welded railway vehicle structure by different methods

961

Fatigue strength analysis of welded joints in closed steel sections in rail vehicles

962

Fatigue strength and failure mechanisms of wrought aluminium alloys in the VHCF-region considering material and component relevant influencing factors

963

Fatigue strength and formation behavior of surface damage in ultrafine grained copper with different non-equilibrium microstructures

964

Fatigue strength and fracture mechanism of different post-fused thermal spray-coated steels with a Co-based self-fluxing alloy coating

965

Fatigue strength and fracture mechanism of steel modified by super-rapid induction heating and quenching

966

Fatigue strength and life of compressor blades for marine gas turbine engines

967

Fatigue strength and residual stress of groove-rolled products

968

Fatigue strength assessment of Invar alloy weld joints using the notch stress approach

969

Fatigue strength assessment of load-carrying cruciform joints with material mismatching in low- and high-cycle fatigue regions based on the effective notch concept

970

Fatigue strength assessment of tubular welded joints by an alternative structural stress approach

971

Fatigue strength assessment of welded joints: From the integration of Paris’ law to a synthesis based on the notch stress intensity factors of the uncracked geometries

972

Fatigue strength CAE system for three-dimensional welded structures

973

Fatigue strength characteristics evaluation of SUH660 considering small fatigue crack propagation behavior and hardness distribution

974

Fatigue strength degradation of E-glass FRP composites and carbon FRP composites

975

Fatigue strength estimation of adhesively bonded tongue and groove joint of thick woven composite sandwich structures using genetic algorithm approach

976

Fatigue strength estimation of adhesively bonded tubular joint using genetic algorithm approach

977

Fatigue strength estimation of adhesively bonded tubular joint using genetic algorithm approach

978

Fatigue strength estimation of adhesively bonded tubular joint using genetic algorithm approach

979

Fatigue strength evaluation of a bogie frame for urban maglev train with fatigue test on full-scale test rig

980

Fatigue strength evaluation of cross-tension spot weld joints of cold rolled mild steel sheet

981

Fatigue strength evaluation of friction stir welded aluminium joints using the nominal and notch stress concepts

982

Fatigue strength evaluation of linear flow split profile sections based on hardness distribution

983

Fatigue strength evaluation of load-carrying cruciform fillet-welded joints made with mild steel plates of different thickness

984

Fatigue strength evaluation of the Japanese railway wheel

985

Fatigue strength evaluation of transverse fillet welded joints subjected to bending loads

986

Fatigue strength experiments of corroded small scale steel specimens

987

Fatigue strength for small shallow defects/cracks in torsion

988

Fatigue strength improvement by ultrasonic impact treatment of highly stressed spokes of cast aluminium wheels

989

Fatigue strength improvement factors for high strength steel welded joints treated by high frequency mechanical impact

990

Fatigue strength improvement of 5083 H11 Al-alloy T-welded joints by shot peening: experimental characterization and predictive approach

991

Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity

992

Fatigue strength improvement of a hard chromium plated AISI 4140 steel using a plasma nitriding pre-treatment

993

Fatigue strength improvement of longitudinal fillet welded out-of-plane gusset joints using air blast cleaning treatment

994

FATIGUE STRENGTH IMPROVEMENT OF NORMALIZED 0.53 CARBON STEEL BY LASER SURFACE TREATMENT

995

Fatigue strength improvement of notched structural steels with work hardening

996

Fatigue strength improvement of notched structural steels with work hardening

997

Fatigue strength in laser welding of the lap joint

998

Fatigue strength in polymer-reinforced concrete beams under cyclic loading Original Research Article

999

Fatigue strength investigations of welded details of stiffened plate structures in steel ships

1000

Fatigue strength of a clutch pedal made of reprocessed short glass fibre reinforced polyamide

بازگشت