بر اساس عنوان

1
Influence of Endurance Exercise Overloading Patterns Levels Ventricular Catecholamines After a Bout of Lactate Threshold Test in Male Wistar Rat
2
Influence of Endurance Exercise Overloading Patterns on the Levels of Left Ventricular Catechoamines After a Bout of Lactate Threshold Test in Male Wistar Rat
3
Influence of energetic ion bombardment on W-C:H coatings deposited with W and WC targets
4
Influence of energy and wavelength on femtosecond laser-induced nucleation of protein
5
Influence of energy concentration and feed form of the diet on growth performance and digestive traits of brown egg-laying pullets from 1 to 120 days of age
6
Influence of energy demands ratio on the optimal facility scheme and feasibility of BCHP system
7
Influence of energy density and unit size on portion size estimation
8
Influence of energy intake during late gestation and early post-calving on reproductive performance of beef cattle.
9
Influence of energy levels on the electronic properties of organic light harvesting devices
10
Influence of energy transfer from Ce3+ to Eu2+ on luminescence properties of Ba3Si6O9N4:Ce3+, Eu2+ phosphors
11
Influence of energy transfer on fluorescence and lasing properties of various laser dyes co-doped in ORMOSILs
12
Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel
13
Influence of engineered titania nanotubular surfaces on bone cells
14
Influence of enhanced malate dehydrogenase expression by alfalfa on diversity of rhizobacteria and soil nutrient availability
15
Influence of enhanced malate dehydrogenase expression by alfalfa on diversity of rhizobacteria and soil nutrient availability
16
Influence of enhanced melt supply on upper crustal structure at a mid-ocean ridge discontinuity: A three-dimensional seismic tomographic study of 9°N East Pacific Rise
17
Influence of enhanced UV-B radiation on wheat production in relation with abiotic, biotic and socioeconomics constraints
18
Influence of enological practices on the antioxidant activity of wines
19
Influence of ensiling forages at different dry matters and silage additives on lipid metabolism and fatty acid composition
20
Influence of ENSO variability on sinking-particle fluxes in the northeastern equatorial Pacific
21
Influence of enteral diets supplemented with key nutrients on lymphocyte subpopulations in Peyerʹs patches of endotoxin-boostered mice
22
Influence of enteral versus parenteral nutrition on blood glucose control in acute pancreatitis: A systematic review
23
Influence of enteric nutrition on blood urea nitrogen (BUN) in very old patients with chronic kidney disease (CKD)
24
Influence of entrance channels on the formation of superheavy nuclei in massive fusion reactions Original Research Article
25
Influence of entry duct bends on the performance of return-flow cyclone dust collectors
26
Influence of environment and genotype on polyphenol compounds and in vitro antioxidant capacity of native Andean potatoes (Solanum tuberosum L.)
27
Influence of environment and genotype on polyphenol compounds and in vitro antioxidant capacity of native Andean potatoes (Solanum tuberosum L.)
28
Influence of environment and grinding on the crystallisation mechanism of ZrO2 gel Original Research Article
29
Influence of environment factors on bacterial ingestion rate of the deposit-feeder Hydrobia ulvae and comparison with meiofauna
30
Influence of environment on fatigue mechanisms in high-temperature titanium alloy IMI834
31
Influence of Environment on Glandular Trichomes and Composition of Essential Oil of Perovskia abrotanoides Karel
32
Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys
33
Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys
34
Influence of environment on seed soluble carbohydrates in selected lentil cultivars
35
Influence of environment on seed soluble carbohydrates in selected lentil cultivars
36
Influence of environment on the excited state deactivation in functionalized quinquethienyl in solution
37
Influence of environment on the mechanical behaviour of mature human enamel
38
Influence of environment on walleye pollock eggs, larvae, and juveniles in the southeastern Bering Sea
39
Influence of Environment, Strategy, and Market Orientation on Performance in Small Manufacturing Firms
40
Influence of Environmental Aging on Properties of Polymeric Mortars
41
Influence of environmental and genetic factors on health-related compounds in strawberry
42
Influence of environmental and genetic factors on the stability of essential oil composition of Thymus pulegioides
43
Influence of environmental and nutritional factors in the production of astaxanthin from Haematococcus pluvialis
44
Influence of environmental and nutritional factors on succinic acid production and enzymes of reverse tricarboxylic acid cycle from Enterococcus flavescens
45
Influence of environmental and prey variables on low tide shorebird habitat use within the Robbins Passage wetlands, Northwest Tasmania
46
Influence of environmental conditions and building structure on food quality: A survey of hand-crafted dairies in Northern Italy
47
Influence of environmental conditions on carbonaceous particle concentrations within New Zealand
48
Influence of environmental conditions on dental composite flexural properties
49
Influence of environmental conditions on production of volatiles by Trichoderma atroviride in relation with the sick building syndrome
50
Influence of environmental conditions on the activity of the recombinant mannuronan C-5-epimerase AlgE2
51
Influence of environmental conditions on thermal stability of recombinant Aspergillus aculeatus pectinmethylesterase
52
Influence of environmental enrichment on welfare-related behavioural and physiological parameters in growing pigs
53
Influence of environmental factors on a population of goitred gazelles (Gazella subgutturosa subgutturosaGüldenstaedt, 1780) in semi-wild conditions in an arid environment: a preliminary study
54
Influence of environmental factors on airborne fungi in houses of Santa Fe City, Argentina
55
Influence of Environmental Factors on Distribution of Plant Species in Nodushan Rangelands of Yazd Province (Iran)
56
Influence of environmental factors on energy absorption degradation of polystyrene foam in protective helmets
57
Influence of environmental factors on meal intake in overweight and normal-weight male adolescents. A laboratory study
58
INFLUENCE OF ENVIRONMENTAL FACTORS ON SEED GERMINATION AND SEEDLING EMERGENCE OF YELLOWTOP (Flaveria bidentis)
59
Influence of environmental factors on shot put and hammer throw range
60
Influence of Environmental Factors on Social Participation Post-Stroke
61
Influence of environmental factors on the biosynthesis of type B trichothecenes by isolates of Fusarium spp. from Spanish crops
62
Influence of environmental factors on the sap flux density of mango trees under rain-fed cropping systems in West Africa
63
Influence of environmental factors, wet processing and their interactions on the biochemical composition of green Arabica coffee beans
64
Influence of environmental gradients on C and N stable isotope ratios in coral reef biota of the Red Sea, Saudi Arabia
65
Influence of environmental humidity on plasma etching polyamide 6 films
66
Influence of environmental noises on the Gomatam model of interacting species
67
Influence of environmental noises on the Gomatam model of interacting species
68
Influence of environmental noises on the Gompertz model of two species fishery
69
Influence of environmental noises on the Gompertz model of two species fishery
70
Influence of environmental parameters on production of the acrolein precursor 3-hydroxypropionaldehyde by Lactobacillus reuteri DSMZ 20016 and its accumulation by wine lactobacilli
71
Influence of environmental parameters on the life-history and population dynamics of cuttlefish Sepia officinalis in the western Mediterranean
72
Influence of environmental stimuli on nursing and suckling behaviour in domestic sows and piglets
73
Influence of environmental stresses on stability of O/W emulsions containing droplets stabilized by multilayered membranes produced by a layer-by-layer electrostatic deposition technique
74
Influence of environmental stresses on the stability of W/O/W emulsions containing enzymatically modified starch
75
Influence of environmental temperature and moisture content of aggregates on the workability of cement mortar
76
Influence of environmental temperature on composition of lipids in edible flesh of rainbow trout (Oncorhynchus mykiss)
77
Influence of Environmental Temperature on Postpartum Reproductive Potential of Kundhi Buffaloes
78
Influence of environmental temperature, exercise, semen type and ovulation characteristics on reproductive performance in a commercial embryo transfer program
79
Influence of environmental temperature, exercise, semen type and ovulation characteristics on reproductive performance in a commercial embryo transfer program
80
Influence of environmental temperatures during gestation and at birth on eating characteristics in adolescence: a replication and extension study
81
Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions
82
Influence of environmental variables on the spatio-temporal dynamics of bentho-pelagic assemblages in the middle slope of the Balearic Basin (NW Mediterranean)
83
Influence of enzymatic treatment on the nutritional and functional properties of pea flour
84
Influence of enzyme and chemical adsorption on the thermal degradation path for eucalyptus pulp
85
Influence of Enzyme Levels on the Toxicity and in Vitro Metabolism of 2,2′,5-Trichlorobiphenyl in Houseflies
86
Influence of Enzyme Loading and Physical Parameters on the Enzymatic Hydrolysis of Steam-Pretreated Softwood
87
Influence of enzyme loading on enzymatic hydrolysis of cardboard waste and size distribution of the resulting fiber residue
88
Influence of enzyme supplementation of diets and cooking–flaking of maize on digestive traits and growth performance of broilers from 1 to 21 days of age
89
Influence of enzyme treatment on bioactive compounds and colour stability of betacyanin in flesh and peel of red dragon fruit Hylocereus polyrhizus (Weber) Britton and Rose
90
Influence of Enzyme Type and Hydrolysis Time on Antioxidant Activity of Hydrolyzed Protein from Longtail Tuna (Thunnus tonggol) Dark Muscle
91
Influence of enzymes and plaque acids on in vitro wear of dental composites
92
Influence of enzymes on rheological, microstructure and quality characteristics of parotta - an unleavened Indian flat bread
93
Influence of eotaxin 67G>A polymorphism on plasma eotaxin concentrations in myocardial infarction survivors and healthy controls
94
Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces
95
Influence of EP and AW additives on the tribological behaviour of hard low friction coatings
96
Influence of epicardial adipose tissue and adipocytokine levels on cardiac abnormalities in visceral obesity
97
Influence of Epicardial and Visceral Fat on Left Ventricular Diastolic and Systolic Functions in Patients After Myocardial Infarction
98
Influence of epidermal growth factor and insulin-like growth factor 1 on nuclear maturation and fertilization of buffalo cumulus oocyte complexes in serum free media and their subsequent development in vitro
99
Influence of Epidermal Growth Factor with Cysteamine on in -Vitro Buffalo Embryo Development
100
Influence of Epinephrine Infusion and Transportation Before Slaughter on Proteases Activity in Rabbit Muscles
101
Influence of episode duration of major depressive disorder on response to electroconvulsive therapy
102
Influence of episodic exposures of chlorpyrifos to an estuarine cyprinodontid, Fundulus heteroclitus
103
Influence of epitaxial ferrite on tensile properties of dual phase steel
104
Influence of epitaxial strain on the terrace and inter-layer diffusions in metal epitaxy
105
Influence of epithelial lining fluid lipids on NO2-induced membrane oxidation and nitration
106
Influence of equal channel angular extrusion processing parameters on the microstructure and mechanical properties of Mg–Al–Y–Zn alloy
107
Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy Original Research Article
108
Influence of equal-channel angular pressing on the acoustic emission behaviour of magnesium alloy AZ31 under compression
109
Influence of equiatomic Zr/Nb substitution on superelastic behavior of Ti–Nb–Zr alloy
110
Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation
111
Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation Original Research Article
112
Influence of equinus gait patterns and their treatments on the vertical bodyʹs centre of mass displacement during gait in children with cerebral palsy
113
Influence of equivalent bolt length in finite element modeling of T-stub steel connections
114
Influence of equivalent reactive quartz content on expansion due to alkali silica reaction
115
Influence of Er addition and extrusion temperature on the microstructure and mechanical properties of a Mg–Zn–Zr magnesium alloy
116
Influence of Er substitution for La on the thermal conductivity of (La1−xErx)2Zr2O7 pyrochlores
117
Influence of Er,Cr:YSGG Laser Surface Treatments on Micro Push-Out Bond Strength of Fiber Posts to Composite Resin Core Materials
118
Influence of Er:YAG and Nd:YAG Wavelengths on Laser-Induced Breakdown Spectroscopy Measurements Under Air or Helium Atmosphere
119
Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel
120
Influence of Er:YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths
121
Influence of Er3+ doping on microstructure of oxyfluoride glass–ceramics
122
Influence of Er3+ on the early stages of crystallization of chloro-tellurite glasses studied by XRD and EXAFS
123
Influence of erbia or europia doping on crystal structure and microstructure of ceria–zirconia (CZ) solid solutions
124
Influence of Erbium Addition on the Microstructural Evolution and Tensile Properties of Al/Mg2Si In-Situ Metal Matrix Composites
125
Influence of erosion and deposition on carbon and nitrogen accumulation in resampled steepland soils under pasture in New Zealand
126
Influence of erosion and sedimentation on strike-slip fault systems: insights from analogue models
127
Influence of erroneous learning samples on adaptation in on-line handwriting recognition
128
Influence of erythrocyte aggregation on leukocyte margination in postcapillary expansions: A lattice Boltzmann analysis
129
Influence of Erythropoietin Dose and Albumin Level on the Plasma Brain Natriuretic Peptide in Hemodialysis Patients
130
Influence of Escherichia coli hydrogenases on hydrogen fermentation from glycerol
131
Influence of esophageal carcinoma operations on gastroesophageal reflux
132
Influence of essential onion oil on tin and chromium dissolution from tinplate
133
Influence of esterification and modification of A-ring in a group of lupane acids on their cytotoxicity Original Research Article
134
Influence of estimation method of compression index on spatial distribution of consolidation settlement in Songdo New City
135
Influence of estimation procedure on soil organic carbon stock assessment in Flanders, Belgium
136
Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests
137
Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests
138
Influence of estradiol on adrenal activity in ovariectomized cows during acute stress
139
Influence of estradiol, progesterone, and nutrition on concentrations of gonadotropins and GnRH receptors, and abundance of mRNA for GnRH receptors and gonadotropin subunits in pituitary glands of beef cows
140
Influence of estradiol, stress, and 5-HT2A agonist treatment on Brain-Derived Neurotrophic Factor expression in female rats
141
Influence of estrogen receptor variants on the determination of ER status in human breast cancer
142
Influence of estrogen receptor variants on the determination of ER status in human breast cancer
143
Influence of estrogen therapy at conventional and high doses on the degree of mineralization of iliac bone tissue: a quantitative microradiographic analysis in postmenopausal women
144
Influence of estuarine hypoxia on feeding and sound production by two sympatric pipefish species (Syngnathidae)
145
Influence of etching conditions on apatite fission-track etch pit diameter
146
Influence of etching of polycrystalline Au-, Pt- and glassy carbon surfaces with OH radicals on electrodeposition of metals
147
Influence of ethanol addition in refinery stream fuels and the HCCI combustion
148
Influence of ethanol addition on the modification of montmorillonite by hexadecyl trimethylammonium bromide
149
Influence of ethanol and glycerol concentration over functional and structural properties of zein–oleic acid films
150
Influence of ethanol and pH on the gene expression of the citrate pathway in Oenococcus oeni Original Research Article
151
Influence of ethanol blends on the combustion performance and exhaust emission characteristics of a four-cylinder diesel engine at various engine loads and injection timings
152
Influence of ethanol dose and pigmentation on the incorporation of ethyl glucuronide into rat hair
153
Influence of ethanol in the presence of H2 on the catalytic growth of vertically aligned carbon nanotubes Original Research Article
154
Influence of ethanol on circulation in surface-induced hypothermia and subsequent rewarming
155
Influence of ethanol on lead distribution and biochemical changes in rats exposed to lead
156
Influence of ethanol on the electrocodeposition of Ni/Al2O3 nanocomposite films
157
Influence of ethanol on the high frequency electric polarizability of E. coli Original Research Article
158
Influence of ethanol on the salsolinol excretion in healthy subjects
159
Influence of ethanol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers
160
Influence of ethanol supercritical drying treatment on morphology and electrochemical properties of DyBaCo2O5+δ cathode material
161
Influence of ethanolic extract of Allium sativum on TP53 gene and its anticancer potential in N-Nitrosodiethylamine (NDEA)-induced hepatocellular carcinoma in male albino rats
162
Influence of Ethical Leadership on Innovative Work Behavior: Examination of Individual-Level Psychological Mediators
163
Influence of Ethnicity on the Incidence Rate of Oral Clefts in Northern Iran
164
Influence of ethnocentrism and neo-phobia on ethnic food consumption in Spain
165
Influence of ethoxylate chain length for synperonic NPX surfactants on the film formation behaviour of methylmethacrylate–2-ethylhexyl acrylate copolymer latexes: II. A dielectric investigation
166
Influence of ethyl xanthate on the wettability and surface free energy of galena
167
Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers
168
Influence of ethylene on carbon-catalysed decomposition of methane
169
Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening
170
Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening
171
Influence of ethylene-Oxy spacer group on the activity of linezolid: Synthesis of potent antibacterials possessing a thiocarbonyl group
172
Influence of ethylene–propylene ratio on the thermal degradation behaviour of EPDM elastomers
173
Influence of Etiology of Heart Failure on the Obesity Paradox
174
Influence of etiology on ventilatory expired gas and prognosis in heart failure
175
Influence of Eu doping on the microstructure and photoluminescence of CdS nanocrystals
176
Influence of Eu, Dy co-doped strontium aluminate composition on mechanoluminescence intensity
177
Influence of Eu3+ doping content on photoluminescence of Gd2O3:Eu3+ phosphors prepared by liquid-phase reaction method
178
Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation
179
Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation
180
Influence of Eucalyptus globulus plantation growth on water table levels and low flows in a small catchment
181
Influence of European passenger cars weight to exhaust CO2 emissions
182
Influence of europium nanostructure size on the emission of KBr:Eu^{2 + }
183
Influence of eutrophication on the coagulation efficiency in reservoir water
184
Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars
185
Influence of evaporation conditions for BCP and Alq3 on the performance of the PVK:Ir(ppy)3 emitting system
186
Influence of evaporation on spray flamelet structures
187
Influence of evaporation rate on cracks’ formation of a drying drop of whole blood
188
Influence of evaporation–condensation in reactive spreading Original Research Article
189
INFLUENCE OF EVAPORATIVE COOLING SYSTEM ON MICROCLIMATIC CONDITIONS OF A NURSERY SHADED GREENHOUSE
190
Influence of evolving microstructure on magnetic-hysteresis characteristics in polycrystalline nickel–zinc ferrite, Ni0.3Zn0.7Fe2O4
191
Influence of ewe feeding systems on fatty acid composition of suckling lambs
192
Influence of Exceptionally High Salinities, Marked Variations in Freshwater Discharge and Opening of Estuary Mouth on the Characteristics of the Ichthyofauna of a Normally-Closed Estuary
193
Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth
194
Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth
195
Influence of excessive filler coating on the tensile properties of LDPE–calcium carbonate composites
196
Influence of excessive sludge conditioning on the efficiency of anaerobic stabilization process and biogas generation Original Research Article
197
Influence of exchange cations on the catalytic conversion of limonene over Serra de Dentro (SD) and SAz-1 clays: Correlations between acidity and catalytic activity/selectivity Original Research Article
198
Influence of exchange distortion potential on electron impact excitation of B+
199
Influence of exchangeable cation of smectite on HDTMA adsorption: Equilibrium, kinetic and thermodynamic studies
200
Influence of exchangeable cations on hydraulic conductivity of compacted bentonite
201
Influence of exchangeable cations on the diffusion of neutral diffusants in zeolites of type LTA. An MD study
202
Influence of Excimer Behavior on Photoluminescence and Electroluminescence of a Novel Conjugated Molecule Doped in Polymer
203
Influence of excipients on characteristics and release profiles of poly(ε-caprolactone) microspheres containing immunoglobulin G
204
Influence of excipients on spray-dried powders for inhalation
205
Influence of excitation light wavelength on the photoluminescence properties for ZnO films prepared by magnetron sputtering
206
Influence of Excitation System Control Modes on the Allowable Penetration Level of Distributed Synchronous Generators
207
Influence of excitation wavelength on photoluminescence spectra of Al doped ZnO films
208
Influence of excited electron lifetimes on the electronic structure of carbon nanotubes
209
Influence of excited Landau levels on a two-dimensional electron–hole system in a strong perpendicular magnetic field
210
Influence of exciton transfer on the optical cycle of α-PTCDA
211
Influence of excluded volume on the conformational property of tail-like chain on the simple cubic lattice
212
Influence of exercise training and age on CD14+ cell-surface expression of toll-like receptor 2 and 4
213
Influence of exercise training on blood viscosity in patients with coronary artery disease and impaired left ventricular function, , ,
214
Influence of exfoliating facial cleanser on the bio-tribological properties of human skin
215
Influence of exhaled breath condensates from children with asthma on endothelial cells cultured in vitro. Do we really know everything about our breath condensate?
216
Influence of exhaust gas heating and L/D ratios on the discharge efficiencies for an activated carbon natural gas storage system
217
Influence of exhaustive treadmill exercise on cognitive functioning in chronic fatigue syndrome
218
Influence of exit opening location on mixed convection in a channel with volumetric heat sources
219
Influence of exo β-d-galactofuranosidase inhibitors in cultures of Penicillium fellutanum and modifications in hyphal cell structure Original Research Article
220
Influence of exogenic salicylic acid on Fusarium seedling blight reduction in barley
221
Influence of exogenous application of glutathione on rubisco and rubisco activase in heavy metal-stressed tobacco plant grown in vitro
222
Influence of Exogenous Application of Glycine Betaine on Growth and Ion Accumulation in Strawberry Plants under Saline Condition
223
Influence of exogenous application of some phytoprotectants on growth, yield and pod quality of snap bean under NaCl salinity
224
Influence of exogenous enzyme supplementation on energy utilisation and nutrient digestibility of cereals for broilers
225
Influence of exogenous enzymes ensiled with orange pulp on digestion and growth performance in lambs
226
Influence of exogenous enzymes on nutrient digestibility, extent of ruminal fermentation as well as milk production and composition in dairy cows
227
Influence of exogenous fibrolytic enzyme level and incubation pH on the in vitro ruminal fermentation of alfalfa stems
228
Influence of exogenous fibrolytic enzymes on in vitro and in sacco degradation of forages for ruminants
229
Influence of exogenous iron, calcium, protein and common salt on the bioaccessibility of zinc from cereals and legumes
230
Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach
231
Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach
232
Influence of exogenous polyamines on antioxidant defence and essential oil production in valerian (Valeriana officinalis L.) plants under drought stress
233
Influence of exogenous progesterone on survival of asynchronously transferred Day-10 horse embryos
234
Influence of exogenous xylanase supplementation on apparent metabolisable energy and amino acid digestibility in wheat for broiler chickens
235
Influence of exonic polymorphisms in the gene for LDL receptor-related protein (LRP) on risk of coronary artery disease
236
Influence of exopolysaccharides on the electrophoretic properties of the model cyanobacterium Synechocystis
237
Influence of expanding ring roads on traffic noise in Beijing City
238
Influence of expansion conditions on the characteristics of cholesterol crystals analyzed by statistical design
239
Influence of expansion volume of intercalated graphite on tensile properties of flexible graphite
240
Influence of Experience on the Response of Bathyplectes curculionis (Hymenoptera: Ichneumonidae), a Nonaphidophagous Parasitoid, to Aphid Odor
241
Influence of experimental conditions and Trp mutations on the stability and the folding characteristics of goat α-lactalbumin
242
Influence of experimental conditions on the extraction of phenolic compounds from parsley (Petroselinum crispum) flakes using a pressurized liquid extractor
243
Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test
244
Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep
245
Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep
246
Influence of experimental parameter on the Li-content of LiMn2O4 electrodes produced by pulsed laser deposition
247
Influence of experimental parameters on determination of residual stress using the incremental hole-drilling method
248
Influence of experimental parameters on physical properties of porous silicon and oxidized porous silicon layers
249
Influence of experimental parameters on the composition of precipitates in metallic alloys
250
Influence of experimental parameters on the composition of precipitates in metallic alloys
251
Influence of experimental parameters on the fluorescence response and recovery of the high-performance liquid chromatography analysis of fumonisin B1
252
Influence of experimental protocol on activation energy in char gasification: the effect of thermal annealing
253
Influence of experimental resolution on the quantum-to-classical transition in the quartic oscillator
254
Influence of experimental variables on fracture toughness determined on SEVNB in three points bending. Mullite a case study
255
Influence of experimentally elevated testosterone on nest defence in dark-eyed juncos
256
iNFLUENCE OF EXPLANT AND GROWTH REGULATORS IN THE INDUCTION OF CALLUS OF Annona Muricata IN VITRO
257
Influence of Explant Nodal Positions on the In Vitro Shoot Regeneration of Rose
258
Influence of exploitation on population structure, spatial distribution and reproductive success of dioecious species in a fragmented cloud forest in India Original Research Article
259
Influence of explorer tip diameter in identifying restoration margin discrepancies
260
Influence of explosive energy on the strength of the rock fragments and SAG mill throughput
261
Influence of exposure history on vitellogenin induction in medaka: a case of ‘estrogen memory’?
262
Influence of exposure sites on trace element enrichment in moss-bags and characterization of particles deposited on the biomonitor surface Original Research Article
263
Influence of exposure temperature on chloride diffusion in concretes incorporating silica fume or natural zeolite
264
Influence of exposure to aggressive environment on fatigue behavior of a shot peened high strength aluminum alloy
265
Influence of exposure to environmental lead on serum immunoglobulin in preschool children
266
Influence of exposure to pesticides on serum components and enzyme activities of cytotoxicity among intensive agriculture farmers
267
Influence of exposure to phosphoric and polyacrylic acids on selected microscopic and physical/chemical properties of calcium hydroxide cements
268
Influence of expressed emotion and perceived criticism on cognitive-behavioral therapy for social phobia
269
Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods
270
Influence of extended defects and native impurities on external gettering in polycrystalline silicon
271
Influence of extended defects and native impurities on external gettering in polycrystalline silicon
272
Influence of extended π-conjugation units on carrier mobilities in conducting polymers
273
Influence of Extended-Release Nicotinic Acid on Nonesterified Fatty Acid Flux in the Metabolic Syndrome With Atherogenic Dyslipidemia
274
Influence of extensive compressed natural gas (CNG) usage on air quality
275
Influence of external bias on the surface morphology of a-C:H films grown by electron cyclotron resonance chemical vapor deposition
276
Influence of external density fluctuations on parametric 3-wave interaction Original Research Article
277
Influence of external distortions on multifactor optical identification tags with photon-counting
278
Influence of external electric field on relaxor behaviour of (Pb0.75Ba0.25)(Zr0.70Ti0.30)O3 ceramics
279
Influence of external electric field on the polarity of water droplets in water-in-oil emulsion phase transition
280
Influence of external excitations on ball positioning of an automatic balancer
281
Influence of external field and consequent impurity breathing on excitation profile of doped quantum dots
282
Influence of External Fluctuations on a Hypercycle Formed by Two Kinetically Indistinguishable Species
283
Influence of external grounded screens on the electric field structure in a drift chamber
284
Influence of External Magnetic Field on 3D Thermocapillary Convective Flow in Various Thin Annular Pools Filled with Silicon Melt
285
INFLUENCE OF EXTERNAL MAGNETIC FIELD ON A SYMMETRICAL GYROTROPIC SLAB IN TERMS OF GOOS-HÄNCHEN SHIFTS
286
Influence of external perturbations on a minienvironment: experimental investigations
287
Influence of external stress and plastic strain on morphological evolution of precipitates in Ni-based superalloys
288
Influence of external transverse electric and magnetic fields on the absorption of a parabolic quantum wire
289
Influence of external β-irradiation in oxide glasses
290
Influence of external, intrinsic and individual behaviour variables on serum 25(OH)D in a German survey
291
Influence of extra terms on asymptotic analysis of imperfection sensitivity of toroidal shell segment with random imperfection
292
Influence of Extracellular Matrix Overlay on Phenobarbital-Mediated Induction of CYP2B1, 2B2, and 3A1 Genes in Primary Adult Rat Hepatocyte Culture
293
Influence of extracellular matrix proteins on human keratinocyte attachment, proliferation and transfer to a dermal wound model
294
Influence of extractant on quality and trace elements content of peat humic acids
295
Influence of extraction conditions on phenolic yields from pine bark: assessment of procyanidins polymerization degree by thiolysis
296
Influence of extraction methodology on grape composition values
297
Influence of extraction methods on stability of flavonoids
298
INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO
299
INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO.
300
Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran
301
Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran
302
Influence of extraction procedures on phenolic content and antioxidant activity of Cretan barberry herb
303
Influence of Extraction Solvents on Cosmos caudatus Leaf Antioxidant Properties
304
Influence of extraction system, production year and area on Cornicabra virgin olive oil: a study of five crop seasons
305
Influence of extraction temperature on the final quality of espresso coffee
306
Influence of extractives on mechanism of biomass pyrolysis
307
Influence of extra-framework Al on the structure of the active iron sites in Fe/ZSM-35
308
Influence of extra-framework cations on the diffusion of alkanes in silicalite: Comparison between quasi-elastic neutron scattering and molecular simulations
309
Influence of extreme head rotations on brainstem auditory evoked potentials (BAEP)
310
Influence of extruder and feedstock variables on torque requirement during pretreatment of different types of biomass – A response surface analysis
311
Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy
312
Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80
313
Influence of extrusion rate and magma rheology on the growth of lava domes: Insights from particle-dynamics modeling
314
Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion
315
Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion
316
Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite
317
Influence of extrusion temperature on the microstructure and the texture of 6061Al–15 vol.% SiCw PM composites
318
Influence of extrusion variables on subsequent saccharification behaviour of sago starch
319
Influence of fabric and mineralogy on the mechanics of dolomitic rocks
320
Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate
321
Influence of Fabrication Conditions on the Electrical Behaviour of Polymer Schottky Diodes
322
Influence of fabrication parameter on the nanostructure and photoluminescence of highly doped p-porous silicon
323
Influence of Fabrication Parameters on Thermo-Mechanical Characteristics of Zea Natural Fiber Reinforced Polymer Composites
324
Influence of fabrication process on the performance of light-emitting diodes
325
Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics
326
Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics
327
Influence of fabrication stresses on fatigue life of friction stir welded aluminium profiles
328
Influence of Factors in Provision of Networked Services: An Empirical Study in India
329
Influence of factors unrelated to environmental quality on occupant satisfaction in LEED and non-LEED certified buildings
330
Influence of failure mode induced by a horizontally operated single-tip penetrometer on measured soil resistance
331
Influence of Failure Modes on PAH Emission During Lab-Scale Incineration
332
Influence of failure modes on PEFC stack and single cell performance and durability
333
Influence of Falling Height on the Behavior of Skid-Launching Free-Fall Lifeboat in Regular Waves
334
Influence of fallow, wheat and subterranean clover on pH within an initially mixed surface soil in the field
335
Influence of fallowing practices on soil water and precipitation storage efficiency in semiarid Aragon (NE Spain)
336
Influence of family disharmony and parental alcohol use on adolescent social skills, self-efficacy, and alcohol use
337
Influence of family history and lifestyle on blood pressure and heart rate in young adults in Jordan
338
INFLUENCE OF FAMILY RELATED ISSUES ON WORK LIFE BALANCE
339
Influence of Family Structure on the Mental Health and Academic Performance of In-School Adolescents
340
Influence of farm resource endowment on possibilities for sustainable development: A case study for vegetable farms in South Uruguay
341
Influence of Farmers’ Characteristics on Knowledge Gap of Recommended Sugarcane Production Technology in Khyber Pakhtunkhwa, Pakistan
342
Influence of farmers’ socio-economic and technology characteristics on soybean seeds technology adoption in Southern Borno State, Nigeria
343
Influence of farming activities in the Iberian Peninsula on the winter habitat use of common crane (Grus grus) in areas of its traditional migratory routes
344
Influence of farming and feeding systems on composition and quality of goat and sheep milk
345
Influence of farming methods on microbiological contamination and prevalence of resistance to antimicrobial drugs in isolates from beef
346
INFLUENCE OF FARMING SYSTEM, NITROGEN RATES AND METEOROLOGICAL CONDITIONS ON NAKED OAT IN LATVIA
347
Influence of farmyard manure, inorganic fertilizers and weed control practices on some soil physical properties in a long-term experiment
348
Influence of Fasciola hepatica on Serum Biochemical Parameters and Vascular and Biliary System of Sheep Liver.
349
Influence of fast charge on the life cycle of positive lead–acid battery plates
350
Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil
351
Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam
352
Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam
353
Influence of fastener placement on vibration-induced loosening
354
Influence of Fasteners Disposition on Behaviour of Timber-Framed Walls with Double Fibre-Plaster Coating Boards
355
Influence of fasteners disposition on behaviour of timber-framed walls with single fibre–plaster sheathing boards
356
Influence of fast-heating processes and O atom production by a nanosecond spark discharge on the ignition of a lean –air premixed flame
357
Influence of Fasting on Functional Recovery of the Isolated Heart Exposed to Ischemia Reperfusion in Young and Aged Male Albino Rats
358
Influence of fat content on physico-chemical and oxidative stability of foal liver pâté
359
Influence of fat on the perceived texture of set acid milk gels: a sensory perspective
360
Influence of fat/carbohydrate ratio on progression of fatty liver disease and on development of osteopenia in male rats fed alcohol via total enteral nutrition (TEN)
361
Influence of fathersʹ social class on cardiovascular disease in middle-aged men
362
Influence of fatigue and aggressive exposure on GFRP girder to SFRSCC deck all-adhesive connection
363
Influence of fatigue load range on the growth of a microstructurally short edge crack simulated by a discrete dislocation formulation
364
Influence of fatigue, depression, and demographic, socioeconomic, and clinical variables on quality of life of patients with epilepsy
365
Influence of fatty acid chain length and cis/trans isomerization on postprandial lipemia and factor VII in healthy subjects (postprandial lipids and factor VII)
366
Influence of fatty acid composition of raw materials on biodiesel properties
367
Influence of fatty acid composition of woody biodiesel plants on the fuel properties
368
Influence of fatty acid composition on chemical changes in blends of sunflower oils during thermoxidation and frying
369
Influence of fatty acid methyl esters from hydroxylated vegetable oils on diesel fuel lubricity
370
Influence of fatty acid unsaturation degree over exhaust and noise emissions through biodiesel combustion
371
Influence of fatty alcohol antifoam suspensions on foam stability
372
Influence of fault arc characteristics on the accuracy of digital fault locators
373
Influence of Fault Current Limiter in Voltage dro‎p and TRV Considering Wind Farm
374
Influence of fault process zone on ground shaking of inland earthquakes: Verification of Mj = 7.3 Western Tottori Prefecture and Mj = 7.0 West Off Fukuoka Prefecture earthquakes, southwest Japan
375
Influence of FCA Welding Process Parameters on Distortion of 409M Stainless Steel for Rail Coach Building Original Research Article
376
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
377
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
378
Influence of F-doping on the transmittance and electron affinity of CdO thin films suitable for solar cells technology
379
Influence of Fe addition on glassy stability of an Al85Ni5Y8Co2 metallic glass with a large supercooled liquid region
380
Influence of Fe addition on hydrogen storage characteristics of Ti–V-based alloy
381
Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl
382
Influence of Fe and Ni on creep of near α-Ti alloy IMI834
383
Influence of Fe and Ni on creep of near α-Ti alloy IMI834
384
Influence of Fe contamination and temperature on mechanically alloyed Co–Ni–Mo electrodes for hydrogen evolution reaction in alkaline water
385
Influence of Fe content and particle size the on the processing and mechanical properties of low-cost Ti–xFe alloys
386
Influence of Fe Content on Microstructure and Magnetic Properties of Melt-Spun SmCo-Based Alloy Ribbons Original Research Article
387
Influence of Fe content on the microstructure and hydrogen storage properties of Ti16Zr5Cr22V57−xFex (x = 2–8) alloys
388
Influence of Fe content on the structural and optical properties of ZnFeS thin films
389
Influence of Fe doping on nanostructures and photoluminescence of sol–gel derived ZnO
390
Influence of Fe doping on the electrical properties of Sr2MgMoO6−δ
391
Influence of Fe doping on the structural, optical and acetone sensing properties of sprayed ZnO thin films
392
Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings
393
Influence of Fe ions in characteristics and optical properties of mesoporous titanium oxide thin films
394
Influence of Fe nanoparticles diameters on the structure and electron emission studies of carbon nanotubes and multilayer graphene
395
Influence of Fe on the room and high-temperature sliding wear of NiAl coatings
396
Influence of Fe substitutions on the deformation behavior and fault energies of Ni3Ge–Fe3Ge L12 intermetallic alloys Original Research Article
397
Influence of Fe/Ba ratio, basic agent and calcination temperature on the physical properties of nanocrystalline barium hexaferrite thin films prepared by a sol–gel method
398
Influence of Fe2O3 content on the dielectric behavior of aluminous porcelain insulators
399
Influence of Fe2O3 on alloying and magnetic properties of Fe–Al
400
Influence of Fe3+ and Ho3+ co-doping on the photocatalytic activity of TiO2
401
Influence of Fe3+-doping on optical properties of CeO2−y nanopowders
402
Influence of Fe-additives on the microstructure and mechanical properties of vacuum copper condensates
403
Influence of Fear of Falling Severity Measured by Falls Efficacy Scale-International on Gait and Balance Performance After Chronic Stroke
404
Influence of Feed Additives in Quality of Broiler Carcasses
405
Influence of feed characteristics on the microwave-assisted pyrolysis used to produce syngas from biomass wastes
406
Influence of feed characteristics on the microwave-assisted pyrolysis used to produce syngas from biomass wastes
407
Influence of feed components on the activity and stability of cobalt molybdenum alumina metathesis catalyst Original Research Article
408
Influence of feed concentration and transmembrane pressure on membrane fouling and effect of hydraulic flushing on the performance of ultrafiltration Original Research Article
409
Influence of feed concentration on the accuracy of permeate flux decline prediction in ultrafiltration Original Research Article
410
Influence of feed contaminated with seeds of cleavers (Galium aparine) on the health and production traits in broiler chickens
411
Influence of feed form and conditioning temperature on performance, apparent metabolisable energy and ileal digestibility of starch and nitrogen in broiler starters fed wheat-based diet
412
Influence of Feed Impurity on the Design and Operation of an Industrial Acetic Acid Dehydration Column
413
Influence of feed motion features on small holes drilling process
414
Influence of feed properties and reaction conditions on catalytic pyrolysis of gas oils and heavy oils
415
Influence of Feed Supplementation with Cannabis Sativa on Quality of Broilers Carcass
416
Influence of feed time and sulfate load on the organic and sulfate removal in an ASBR
417
Influence of Feed Withdrawal for Three Hour Time Period on Growth Performance and Carcass Parameters of Later Stage of Male Broiler Chickens
418
Influence of feeding a milk replacer deficient in -linolenic acid on fatty acid composition of various tissues in goat kids
419
Influence of feeding a milk replacer deficient in (alpha)-linolenic acid on fatty acid composition of various tissues in goat kids
420
Influence of feeding bee colonies on colony strenght and honey authenticity
421
Influence of feeding complete dry diets mixed with water on production traits and health status of blue foxes (Alopex lagopus)
422
Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical properties
423
Influence of Feeding Diets Containing Dried Vegetable Fat Blend on the Performance of Broilers
424
Influence of feeding free lysine to early lactation dairy cows on ruminal lysine escape, rumen fermentation and productivity
425
Influence of feeding increasing levels of leucaena leaf meal on the performance of milch goats and metabolism of mimosine and 3-hydroxy-4 (1H) pyridone
426
Influence of feeding intensity, grazing and finishing feeding on meat and eating quality of young bulls and the relationship between muscle fibre characteristics, fibre fragmentation and meat tenderness
427
Influence of feeding intensity, grazing and finishing feeding on muscle fibre characteristics and meat colour of semitendinosus, longissimus dorsi and supraspinatus muscles of young bulls
428
INFLUENCE OF FEEDING OF FRIESIAN CALVES ON COW S MILK ON MEAT AND FAT QUALITIES AND SOME COOKING PROPERTIES
429
Influence of Feeding Processed Pigeon Pea (Cajanus cajan) Seeds on Broiler Chick Performance
430
Influence of feeding ratio on steam gasification of palm shells in a rotary kiln pilot plant. Experimental and numerical investigations
431
Influence of feeding regimens on rat gut fluids and colonic metabolism of diclofenac-β-cyclodextrin
432
Influence of feeding systems on cortisol levels, fat colour and instrumental meat quality in light lambs
433
Influence of feeding various phosphorus sources on apparent digestibility of phosphorus in dairy cows
434
Influence of feeding vitamin D3 and aging on the tenderness of four lamb muscles
435
Influence of feedstock chemical composition on product formation and characteristics derived from the hydrothermal carbonization of mixed feedstocks
436
Influence of feedstock powder characteristics and spray processes on microstructure and properties of WC–(W,Cr)2C–Ni hardmetal coatings
437
Influence of feedstock preparation on ceramic injection molding and microstructural features of zirconia toughened alumina
438
Influence of feedstock source on the biocatalyst stability and reactor performance in continuous biodiesel production
439
Influence of female age, sperm senescence and multiple mating on sperm viability in female Drosophila melanogaster
440
Influence of female nutritional status on mating dynamics in a sexually cannibalistic praying mantid
441
Influence of femoral anteversion on proximal femoral loading: measurement and simulation in four patients
442
Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement
443
Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface
444
Influence of femtolaser notch sharpening technique in the determination of essential work of fracture (EWF) parameters
445
Influence of femtosecond laser marking on the corrosion resistance of stainless steels
446
Influence of fenceline bull exposure on duration of postpartum anoestrus and pregnancy rate in beef cows
447
Influence of FeO and H on the electrical conductivity of olivine
448
Influence of fermentation by-products on the purification of ethanol from water using pervaporation
449
Influence of fermentation concentrate of Hericium caput-medusae (Bull.:Fr.) Pers. on performance, antioxidant status, and meat quality in broilers
450
Influence of fermentation on some quality characteristics of trifoliate yam (Dioscorea dumetorum) hardened tubers
451
Influence of fermentation temperature on volatile thiols concentrations in Sauvignon blanc wines
452
Influence of fermentation time on the development of compounds responsible for quality in black tea
453
Influence of ferric chloride treated Leucaena leucocephala on metabolism of mimosine and 3-hydroxy 4(1H)-pyridone in growing rabbits
454
Influence of ferric oxyhydroxide addition on biomethanation of waste activated sludge in a continuous reactor
455
Influence of ferrite and pearlite content on mechanical properties of ductile cast irons
456
Influence of ferrite fraction within martensite matrix on fatigue crack propagation: An experimental verification with dual phase steel
457
Influence of ferrocene addition on the morphology and structure of carbon from petroleum residue Original Research Article
458
Influence of ferrocene/benzene mole ratio on the synthesis of carbon nanostructures
459
Influence of ferroelectric polarization on the energetics of the reaction of 2-fluoroethanol on BaTiO3
460
Influence of ferrous ions on extracellular polymeric substances content and sludge dewaterability during bioleaching
461
Influence of Ferrous Iron and pH on Carbon Tetrachloride Degradation by Methanosarcina thermophila
462
INFLUENCE OF FERTILIZATION ON GROWTH AND QUALITY OF LETTUCE
463
INFLUENCE OF FERTILIZATION ON, MITE INFESTATION IN SOME EGGPLANT CULTIVARS, AND THEIR CHARACTERS
464
INFLUENCE OF FERTILIZATION UPON FORAGE QUALITY ON A PERMANENT GRASSLAND OF AGROSTIS CAPILLARIS L. – FESTUCA RUBRA L.
465
Influence of fertilizer management and water regime on methane emission from rice fields
466
Influence of fertilizer types and placement methods on the yield of white yam Dioscorea rotundata
467
Influence of Ferula assa-foetida Loaded Chitosan Nanoparticle Biofilm on Wound Healing in Full-Thickness Wounds Infected with Methicillin Resistant Staphylococcus aureus
468
Influence of FeSO4 concentration on thermal emissivity of coatings formed on titanium alloy by micro-arc oxidation
469
Influence of fiber alignment on creep in directionally solidified NiAl–10Mo in-situ composites
470
Influence of fiber and grain bridging on crack profiles in SiC fiber-reinforced alumina-matrix composites
471
Influence of fiber and grain bridging on crack profiles in SiC fiber-reinforced alumina-matrix composites
472
INFLUENCE OF FIBER ASPECT RATIO ON SHEAR CAPACITY OF DEEP BEAMS USING ARTIFICIAL NEURAL NETWORK TECHNIQUE
473
Influence of fiber bridging on structural size-effect
474
Influence of fiber chemical coating on the acoustic emission behavior of steel fiber reinforced concrete
475
Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites
476
Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites
477
Influence of fiber coating thickness on microstructure and mechanical properties of carbon fiber-reinforced zirconium diboride based composites
478
Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites
479
Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites
480
Influence of fiber content on the structure and properties of short carbon fiber reinforced carbon foam
481
Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates
482
Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates
483
Influence of fiber fermentability on nutrient digestion in the dog
484
Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature
485
Influence of fiber orientation and matrix processing on the tensile and creep performance of Nextel 610 reinforced polymer derived ceramic matrix composites
486
Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete
487
Influence of fiber orientation on abrasive wear of unidirectionally reinforced carbon fiber–polyetherimide composites
488
Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation
489
Influence of fiber reinforcement on strength and toughness of all-lightweight concrete
490
Influence of fiber structure modification on the mechanical properties of flax fiber-epoxy composites
491
Influence of fiber surface treatment on properties of Indian grass fiber reinforced soy protein based biocomposites
492
Influence of fiber surface-treatment on interfacial property of poly(l-lactic acid)/ramie fabric biocomposites under UV-irradiation hydrothermal aging
493
Influence of Fiber Undulations on Buckling of Thin Filament-Wound Cylinders in Axial Compression
494
Influence of fiber volume fraction on mode III interlaminar fracture toughness of glass/epoxy composites
495
Influence of fiber waviness on the effective properties of discontinuous fiber reinforced composites
496
Influence of fiber’s shape and size on overall elastoplastic property for micropolar composites
497
Influence of fiber–matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites
498
Influence of Fiber-Reinforced Concrete on Radon Concentrations
499
Influence of fibers and solid lubricants on low amplitude oscillating wear of polyetherimide composites
500
Influence of fibers on flexural behavior and ductility of concrete beams reinforced with GFRP rebars
501
Influence of fibre coating in headspace solid-phase microextraction–gas chromatographic analysis of aromatic and medicinal plants
502
Influence of fibre distribution on the transverse flow permeability in fibre bundles
503
Influence of fibre distribution on the transverse flow permeability in fibre bundles
504
Influence of fibre from different cereals on the rheological characteristics of wheat flour dough and on biscuit quality
505
Influence of fibre geometry and matrix maturity on the mechanical performance of ultra high-performance cement-based composites
506
Influence of fibre length and opening roller speed on physical properties of OE rotor-spun viscose yarns
507
Influence of fibre length and opening roller speed on physical properties of OE rotor-spun viscose yarns
508
Influence of Fibre Length on the Behaviour of Polypropylene Fibre Reinforced Cement Concrete
509
Influence of Fibre Length, Dissolution and Biopersistence on the Production of Mesothelioma in the Rat Peritoneal Cavity
510
Influence of Fibre Length, Dissolution and Biopersistence on the Production of Mesothelioma in the Rat Peritoneal Cavity
511
Influence of fibre orientation and stacking sequence on petalling of glass/polyester composite cylindrical shells under axial compression
512
Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite
513
Influence of fibre properties on the mechanical behaviour of unidirectionally-reinforced ceramic matrix composites
514
Influence of fibre properties on the mechanical behaviour of unidirectionally-reinforced ceramic matrix composites
515
Influence of fibre reinforcement and peel ply surface treatment towards adhesion of composite surfaces
516
Influence of fibre reinforcement on the aging behaviour of an AlSi12CuMgNi alloy
517
Influence of fibre reinforcement on the aging behaviour of an AlSi12CuMgNi alloy
518
Influence of fibre treatments on mechanical properties of short Sansevieria cylindrica/polyester composites
519
Influence of fibre type on flexural behaviour of self-compacting fibre reinforced cementitious composites
520
Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimen
521
Influence of fibre–matrix interface on the fracture behaviour of carbon-carbon composites
522
Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute
523
Influence of fibrin glue on seroma formation after breast surgery
524
Influence of fibrin sealant (Tisseel®) on osteochondral defect repair in the rabbit knee
525
Influence of Fibroblast Growth Factor (bFGF) and Insulin-like Growth Factor (IGF-I) on Cytoskeletal and Contractile Structures and on Atrial Natriuretic Factor (ANF) Expression in Adult Rat Ventricular Cardiomyocytes in Culture
526
Influence of fibrolytic enzymes on ruminal disappearance and fermentation in steers fed diets with short and long particle length of forage
527
Influence of fibrolytic enzymes on the hydrolysis and fermentation of pure cellulose and xylan by mixed ruminal microorganisms in vitro
528
Influence of Fibrolytic Enzymes on the in vitro Hydrolysis and Fermentation of Different Types of Roughages Treatment
529
Influence of fibrous additives on properties of aerated autoclaved concrete forming mixtures and strength characteristics of products
530
Influence of fibrous feed ingredients on voluntary intake of dry sows
531
Influence of field burning and soil treatments on growth of wheat after Kentucky bluegrass, and effect of Rhizoctonia cerealis on bluegrass emergence and growth
532
Influence of field evaporation treatment on the field emission properties of carbon nanotubes array
533
Influence of field margins and landscape context on ground beetle diversity in Wisconsin (USA) potato fields
534
Influence of field-effect charges on the optical properties of α-sexithiophene thin films
535
Influence of figure skating skates on vertical jumping performance
536
Influence of filament thickness, thermal process and magnetic field on misalignment angles in multifilament Bi2212 tapes Original Research Article
537
Influence of fill factor variation in high shear granulation on the post granulation processes: Compression and tablet properties
538
Influence of filler addition to bonding agents on shear bond strength to bovine dentin
539
Influence of Filler Content on the Mechanical, Thermal, Moisture Absorption, and Biodegradability Properties of Bionanocomposite with Cellulosic Fibers Derived from Delonix Regia Fruits
540
Influence of filler dispersion on thin film composites sensing properties
541
Influence of filler distribution on the color parameters of experimental resin composites
542
Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites
543
Influence of filler parameters on the mechanical coherence of dental restorative resin composites
544
Influence of filler particles on deformation and fracture mechanism of isotactic polypropylene
545
Influence of filler size and morphology in controlling the thermal emissivity of aluminium/polymer composites for space applications
546
Influence of filler type on the performance and microstructure of a carbon/graphite material
547
Influence of filler type on the performance and microstructure of a carbon/graphite material
548
Influence of filler type on the properties of foam concrete
549
Influence of filler type on wet skid resistance of SSBR/BR composites: Effects from roughness and micro-hardness of rubber surface
550
Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade
551
Influence of fillers and additives on the cure kinetics of an epoxy/anhydride resin
552
Influence of fillers on free volume and gas barrier properties in styrene-butadiene rubber studied by positrons
553
Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas
554
Influence of fillers on NR/SBR/XNBR blends. Morphology and wear
555
Influence of fillers on the low amplitude oscillating wear behaviour of polyamide 11
556
Influence of filling conditions on product quality and machine parameters in fermented coarse meat emulsions produced by high shear grinding and vacuum filling Original Research Article
557
Influence of filling techniques on shrinkage stress in dental composite restorations
558
Influence of filling–drawdown cycles of the Vajont reservoir on Mt. Toc slope stability
559
Influence of film and modified atmosphere on sensory quality of roasted apple cv. Reineta
560
Influence of film morphology on the vibrational spectra of dioctyl substituted polyfluorene (PFO)
561
Influence of film preparation procedures on the crystallinity, morphology and mechanical properties of LLDPE films
562
Influence of film processing conditions on the morphology of polyamide 6: Consequences on water and ethanol sorption properties
563
Influence of film qualities on noise characteristics of a-Si1−xCx:H thin films deposited by PECVD
564
Influence of film structure and composition on diffusion barrier performance of SiOx thin films deposited by PECVD
565
Influence of film structure on gas barrier properties of SiOxNy films
566
Influence of film structure on the surface vibrations of Co/Au(111)
567
Influence of film structure on the surface vibrations of Co/Au(lll)
568
Influence of film thickness and cross-sectional geometry on hydrophilic microchannel condensation
569
Influence of film thickness on in vitro bioactivity of thin anatase films produced through direct deposition from an aqueous titanium tetrafluoride solution
570
Influence of film thickness on joint bend strength of a ceramic/resin composite joint
571
Influence of film thickness on the molecular arrangement of copper phthalocyanine on hydrogen-terminated Si(111)
572
Influence of film thickness on the structure and properties of PDMS membrane
573
Influence of filter ventilation on the chemical composition of cigarette mainstream smoke Original Research Article
574
Influence of filtering of cold pressed berry seed oils on their antioxidant profile and quality characteristics
575
Influence of filtration conditions on the performance of nanofiltration and reverse osmosis membranes in dairy wastewater treatment Original Research Article
576
Influence of filtration on concentrations of 62 elements analysed on crystalline bedrock groundwater samples by ICP-MS
577
Influence of filtration on volatile compounds and sensory profile of virgin olive oils
578
Influence of filtration superficial velocity on cake compression and cake formation
579
Influence of filtration, preservation and storing on the analysis of low molecular weight organic acids in natural waters
580
Influence of Final Apical Width on Smear Layer Removal Efficacy of Xp Endo Finisher and Endodontic Needle: An Ex Vivo Study
581
Influence of financial productivity incentives on the use of preventive care
582
Influence of fine aggregate characteristics on the rheological properties of mortars
583
Influence of fine particles on grain coarsening within an orientation gradient
584
Influence of fine particles on grain coarsening within an orientation gradient Original Research Article
585
Influence of fine tailings on polyester mortar properties
586
Influence of Finely Dispersed Carbon Nanotubes on the Performance Characteristics of Polymer Electrolytes for Lithium Batteries
587
Influence of finely ground limestone on cement hydration
588
Influence of finely ground limestone on cement hydration
589
Influence of fineness of fly ash on the aggregate pelletization process
590
Influence of fineness of rice husk ash and additives on the properties of lightweight aggregate
591
Influence of finishing coatings on hygroscopic moisture buffering in building elements
592
Influence of Finishing Cooling Temperature and Holding Time on Nanometer-size Carbide of Nb-Ti Microalloyed Steel Original Research Article
593
Influence of finishing systems on hydrophilic and lipophilic oxygen radical absorbance capacity (ORAC) in beef
594
Influence of Finite Absorption of Radionuclides on Radionuclide Migration in an Engineered Barrier System
595
Influence of Finite Absorption of Radionuclides on Radionuclide Migration in an Engineered Barrier System
596
Influence of Finite Amplitude Disturbances on the Nonstationary Modes of a Compressible Boundary Layer Flow
597
Influence of finite ground conductivity on the fields of a vertical traveling wave of current
598
Influence of finite heat capacity of solid pins and their spacing on thermoacoustic performance of transverse-pin stacks
599
Influence of finite notch root radius and optically determined crack length on the measured fracture toughness of brittle materials
600
Influence of finite size effect on magnetic and magnetotransport properties of thin films
601
Influence of finite spectral width on the interference spectra of a thin absorbing film on a transparent substrate
602
Influence of fins on formaldehyde removal in annular photocatalytic reactors
603
Influence of fipronil compounds and rice-cultivation land-use intensity on macroinvertebrate communities in streams of southwestern Louisiana, USA
604
Influence of FIR irradiation on paddy moisture reduction and milling quality after fluidized bed drying Original Research Article
605
Influence of fire ignition locations on the actuation of smoke detectors and wet-type sprinklers in a furnished office
606
Influence of fire on native nitrogen-fixing plants and soil nitrogen status in ponderosa pine - Douglas-fir forests in western Montana
607
Influence of fire source locations on the actuation of wet-type sprinklers in an office fire
608
Influence of firing conditions on ceramic products: Experimental study on clay rich in organic matter
609
Influence of firing parameters on phase composition of raw glazes
610
Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies
611
Influence of firing temperature on frost resistance of roofing tiles
612
Influence of firing temperature on interface adhesion between screen-printed Ag film and BaTiO3 substrate
613
Influence of firing temperature on interface adhesion between screen-printed Ag film and BaTiO3 substrate
614
Influence of firing temperature on mechanical properties on roofing tiles
615
Influence of firing temperature on the ceramic properties of clays from Campos dos Goytacazes, Brazil
616
Influence of firing temperature on the ceramic properties of Triassic clays from Tunisia
617
Influence of firing temperature on the color developed by a (Zr,V)SiO4 pigmented opaque ceramic glaze
618
Influence of firing time and framework thickness on veneered Y-TZP discs curvature
619
Influence of fission products on ruthenium oxidation and transport in air ingress nuclear accidents
620
Influence of FK506 on experimental atherosclerosis in cholesterol-fed rabbits Original Research Article
621
Influence of flake fragmentation on the feeding value of steam-flaked corn in finishing diets for feedlot cattle
622
INFLUENCE OF FLAKE SIZE ON THE MORPHOLOGY OF WET SPUN GRAPHENE OXIDE FIBERS
623
Influence of flame conditions on the dispersion of Pd on the flame spray-derived Pd/TiO2 nanoparticles
624
Influence of flame retardants on the mechanism of pyrolysis of cotton (cellulose) fabrics in air
625
Influence of flanking sequences on signaling between the activation function AF1 and DNA-binding domain of the glucocorticoid receptor
626
Influence of flash design upon process parameters of hot die forging
627
Influence of flash temperatures on the tribological behaviour in low-speed sliding: a review
628
Influence of flash temperatures on the tribological behaviour in low-speed sliding: a review
629
Influence of flat and bed sowing methods on growth and yield parameters of wheat in rice-wheat cropping system
630
Influence of flavan-3-ols and procyanidins on UVC-mediated formation of 8-oxo-7,8-dihydro-2′-deoxyguanosine in isolated DNA
631
Influence of flavonoids from Phellinus igniarius on sturgeon caviar: Antioxidant effects and sensory characteristics
632
Influence of Flavonols As in vitro on Low Density Lipoprotein Glycation
633
Influence of Flavor Variability in Skim Milk Powder on Consumer Acceptability of Ingredient Applications
634
Influence of flavour transfer between different gel phases on perceived aroma
635
Influence of flaw inclination angle and loading condition on crack initiation and propagation
636
Influence of flaws and crystal properties on particle fracture in a jet mill
637
Influence of flesh colour, year and growing area on carotenoid and anthocyanin content in potato tubers
638
Influence of flesh colour, year and growing area on carotenoid and anthocyanin content in potato tubers
639
Influence of Flipped Classroom Method on Nursing Students #x2019; Learning Approaches
640
Influence of float and charge voltage adjustment on the service life of AGM VRLA batteries depending on the conditions of use
641
Influence of flocculant molecular weight and anionic charge on flocculation behaviour and on the manufacture of fibre cement composites by the
642
Influence of flocculants on the filtration of copper concentrates with a ceramic capillary filter
643
Influence of Flocculating Agents and Structural Vehicles on the Physical Stability and Rheological Behavior of Nitrofurantoin Suspension
644
Influence of flocs breakage process on submerged ultrafiltration membrane fouling
645
Influence of flood depth and duration on growth of lowland rice weeds, Cote d’Ivoire
646
Influence of Flooding Intensity and Duration on Rice Growth and Yield
647
Influence of flooding, salinity and inundation time on the bioavailability of metals in wetlands
648
Influence of floor motions in wind tunnels on the aerodynamics of road vehicles
649
Influence of floral assemblage, facies and diagenesis on petrography and organic geochemistry of the Eocene Bourgas coal and the Miocene Maritza-East lignite (Bulgaria)
650
Influence of floral resource plants on control of an armored scale pest by the parasitoid Encarsia citrina (Craw.) (Hymenoptera: Aphelinidae)
651
Influence of flour blend composition on fermentation kinetics and phytate hydrolysis of sourdough used to make injera
652
Influence of flow channel insert with pressure equalization opening on MHD flows in a rectangular duct
653
Influence of flow concentration on parameter importance and prediction uncertainty of pesticide trapping by vegetative filter strips
654
Influence of flow conditions on the corrosion of AISI 304L stainless steel
655
Influence of flow direction and flow rate on the initial adhesion of seven Listeria monocytogenes strains to fine polished stainless steel
656
Influence of flow field design on the performance of a direct methanol fuel cell
657
Influence of flow field on sedimentation efficiency in a circular settling tank with peripheral inflow and central effluent
658
Influence of flow injection angle on a leading-edge horseshoe vortex
659
Influence of flow patterns on chromatographic efficiency in centrifugal partition chromatography
660
Influence of flow properties on a structure of a mineral wool primary layer
661
Influence of flow regime and thermal power on residence time distribution in tubular Joule Effect Heaters Original Research Article
662
INFLUENCE OF FLOW REGIME ON THE CONCENTRATION OF CYANIDE PRODUCING ANAEROBIC PROCESS INHIBITION
663
INFLUENCE OF FLOW REGIME ON THE CONCENTRATION OF CYANIDE PRODUCING ANAEROBIC PROCESS INHIBITION
664
Influence of flow restriction on the microstructure and mechanical properties of long glass fiber-reinforced polyamide 6.6 composites for automotive applications
665
Influence of flow with separation on the statistical characteristics of vibrations of the profile a compressor cascade
666
Influence of flowing sodium on creep deformation and rupture behaviour of 316L(N) austenitic stainless steel
667
Influence of flow-through and renewal exposures on the toxicity of copper to rainbow trout
668
Influence of fluctuating thermal and mass diffusion on unsteady MHD buoyancy-driven convection past a vertical surface with chemical reaction and Soret effects
669
INFLUENCE OF FLUCTUATIONS OF THE GEOMETRICAL PARAMETERS ON THE PHOTONIC BAND GAPS IN ONE-DIMENSIONAL PHOTONIC CRYSTALS
670
Influence of flue gas conditioning on fly ash characteristics
671
Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal
672
Influence of Fluid Balance on Morbidity and Mortality in Critically Ill Patients With Acute Kidney Injury
673
Influence of fluid circulation on in vitro reactivity of bioactive glass particles
674
Influence of fluid rotation on the heat transfer and pressure drop in double-pipe heat exchangers
675
Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys
676
Influence of fluids and magma on earthquakes: seismological evidence
677
Influence of fluids on deep crustal Jabalpur earthquake of 21, May 1997: Geophysical evidences
678
Influence of flumequine and oxytetracycline on the resistance of the European eel against the parasitic swimbladder nematode Anguillicola crassus
679
Influence of flumequine and oxytetracycline on the resistance of the European eel against the parasitic swimbladder nematode Anguillicola crassus
680
Influence of flumequine on in vivo mitogen responses of European eel (Anguilla anguilla L., 1758) lymphoid cells
681
Influence of flumequine on in vivo mitogen responses of European eel (Anguilla anguilla L., 1758) lymphoid cells
682
Influence of fluorapatite on the properties of thermally sprayed hydroxyapatite coatings
683
Influence of fluorescence reabsorption and trapping on solid-state optical cooling
684
Influence of fluorescent dye on mechanical properties of adhesive systems
685
Influence of fluorescent whitening agent on the fluorescent emission of resin composites
686
Influence of fluorescer concentration on peroxyoxalate chemiluminescence spectra
687
Influence of fluoridated mouthwashes on corrosion resistance of orthodontics wires
688
Influence of Fluoride Addition on Hydroxyapatite Prepared for Medical Applications
689
Influence of fluoride additions on biological and mechanical properties of Na2O–CaO–SiO2–P2O5 glass–ceramics
690
Influence of fluoride and chloride on corrosion behavior of NiTi orthodontic wires
691
Influence of fluoride co-cystallized with sugar on caries development in desalivated rats
692
Influence of fluoride concentration and ethanol pre-treatment on the reduction of the acid susceptibility of enamel
693
Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys
694
Influence of fluoride ions on corrosion performance of 316L stainless steel as bipolar plate material in simulated PEMFC anode environments
695
Influence of fluoride ions on the amorphous phosphating of aluminium alloys
696
Influence of fluoride on f–f transitions of Eu3+ in LiEuM2O8 (M=Mo, W)
697
Influence of fluoride, hydrogen peroxide and lactic acid on the corrosion resistance of commercially pure titanium
698
Influence of fluorides on phase transition of α-Al2O3 formation
699
Influence of fluorinated acids bonding on surface properties of crosslinked epoxy-based polymers
700
Influence of fluorinated and hydrogenated nanoparticles on the structure and fibrillogenesis of amyloid beta-peptide Original Research Article
701
Influence of fluorine content on the crystallization and microstructure of barium fluorphlogopite glass-ceramics
702
Influence of fluorine doping on SiOxFy films prepared from a TEOS/O2/CF4 mixture using a plasma enhanced chemical vapor deposition system
703
Influence of fluorine in the synthesis of apatites. Synthesis of solid solutions of hydroxy-fluorapatite
704
Influence of fluorine on the solubility of manganotantalite (MnTa2O6) and manganocolumbite (MnNb2O6) in granitic melts — An experimental study
705
Influence of fluorine substitution on the electrochemical performance of 3 V spinel Li4Mn5O12 − ηFη cathodes
706
Influence of fluorine substitution on the morphology and structure of hydroxyapatite nanocrystals prepared by hydrothermal method
707
Influence of fluorine-based additive content on the physical and physicochemical properties of ski gliding wax
708
Influence of fluorine-containing lubricant on properties of NR/BR rubber
709
Influence of fluorite on the Ba-bearing sulphoaluminate cement
710
Influence of fluorite on the isothermal leaching and rheological behaviours of chlorite mineral pulps at low pH
711
Influence of fluoroalkanes on the phase behaviour of methane gas hydrate systems
712
Influence of fluorooxidizers on scintillation properties of fluorohafnate glass doped with Ce3+
713
Influence of fluorosurfactants on the codeposition of ceramic nanoparticles and the morphology of electroless NiP coatings
714
Influence of fluvial processes on the Quaternary geologic framework of the continental shelf, North Carolina, USA
715
Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique
716
Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars
717
Influence of fly ash and silica fume on the consistency retention and compressive strength of concrete subjected to prolonged agitating
718
Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar
719
Influence of fly ash fineness on the chloride penetration of concrete
720
Influence of fly ash on corrosion resistance and chloride ion permeability of concrete
721
Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete
722
Influence of fly ash on strength behavior of typical soils
723
Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes
724
Influence of fO2 and cooling rate on the kinetics and energetics of Fe-rich basalt crystallization
725
Influence of foaming agent on wear and mechanical properties of surface modified rice husk filled polyvinylchloride
726
Influence of Focal Mechanism in Probabilistic Seismic Hazard Analysis
727
Influence of fodder crop rotations on the potential weed flora in the irrigated lowlands of Lombardy, Italy
728
Influence of Folding on Hydrocarbon Generation: an Example from the Dezful Embayment
729
Influence of foliage from different accessions of the sub-tropical leguminous tree, Sesbania sesban, on ruminal protozoa in Ethiopian and Scottish sheep
730
Influence of foliage on radio path losses (PLs) for wireless sensor network (WSN) planning in orchards
731
Influence of Foliar and Soil application of Humic Acid on Growth and Yield of Lettuce
732
Influence of Foliar Application of Osmoprotectants to Ameliorate Salt Stress in Sunflower (Helianthus annuus L.)
733
Influence of foliar application of salicylic acid and soil application of humic materials on cucumber and chickpea grown on a nutrient deficient soil
734
Influence of Foliar Applied GABA on Growth and Yield Contributing Characters of White Gourd (Benincasa hispida)
735
Influence of foliar density profile on canopy flow: A large-eddy simulation study
736
INFLUENCE OF FOLIAR FERMENTED PLANT INFUSIONS ON ORGANICALLY GROWN BLACKBERRY
737
Influence of foliar phosphorus and nitrogen contents on chemical properties of water extractable organic matter derived from fresh and decomposed sugar maple leaves
738
Influence of foliar phosphorus and nitrogen contents on chemical properties of water extractable organic matter derived from fresh and decomposed sugar maple leaves
739
Influence of Follicular Fluid and Seminal Plasma on The Expression of Endometrial Receptivity Genes in Endometrial Cells
740
Influence of follow-up methodology and completeness on apparent clinical outcome of fundoplication  
741
Influence of food abundance on competitive aggression in juvenile convict cichlids
742
Influence of food availability, predator density and forest fragmentation on nest survival of New Zealand robins Original Research Article
743
Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500
744
Influence of food composition on splanchnic blood flow during digestion in unsedated normal dogs: a Doppler study
745
Influence of food intake on plasma LH concentrations in multiparous sows
746
Influence of food on the assimilation of selected metals in tropical bivalves from the New Caledonia lagoon: Qualitative and quantitative aspects
747
Influence of food preservation parameters and associated microbiota on production rate, profile and stability of acylated homoserine lactones from food-derived Enterobacteriaceae
748
Influence of food processing environments on structure initiation of static biofilm of Listeria monocytogenes
749
Influence of food quality on egg production and viability of the marine planktonic copepod Acartia omorii
750
Influence of food soiling matrix on cleaning and disinfection efficiency on surface attached Listeria monocytogenes
751
Influence of food supply and a potential predator (Crangon crangon) on settling behaviour of plaice (Pleuronectes platessa)
752
Influence of food system conditions on N-acyl-l-homoserine lactones production by Aeromonas spp.
753
Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials
754
Influence of footwear midsole material hardness on dynamic balance control during unexpected gait termination
755
Influence of forage : concentrate ratio and type of starch in the diet on feeding behaviour, dietary preferences, digestion, metabolism and performance of dairy goats in mid lactation
756
Influence of forage NDF level, source and pelletizing on growth performance, dietary energetics, and characteristics of digestive function for feedlot cattle
757
Influence of force location in orthodontic shear bond strength testing
758
Influence of forecasting electricity prices in the optimization of complex hydrothermal systems
759
Influence of Foreign DNA Introduction and Periplasmic Expression of Recombinant Human Interleukin-2 on Hydrogen Peroxide Quantity and Catalase Activity in Escherichia coli
760
Influence of foreign ions on the crystal structure of BaTiO3
761
Influence of foreign object damage (FOD) on the fatigue life of simulated Ti-6Al-4 V airfoils
762
Influence of forest cover fraction on L-band soil moisture retrievals from heterogeneous pixels using multi-angular observations
763
Influence of forest disturbance on earthworm (Oligochaeta) communities in the Western Ghats (South India)
764
Influence of forest fires on climate change studies in the central boreal forest of Canada
765
Influence of forest floor type on rates of litter decomposition in microcosms
766
Influence of forest floor type on rates of litter decomposition in microcosms
767
Influence of forest fragmentation on amphibian diversity in the nature reserve of Ambohitantely, highland Madagascar Original Research Article
768
Influence of forest fragmentation on an endangered large-bodied lemur in northwestern Madagascar
769
Influence of forest soil on biodegradation of Drimys winteri by Ganoderma australe
770
Influence of forging and cooling rate on microstructure and properties of medium carbon microalloy forging steel
771
Influence of forging deformation and heat treatment on microstructure of Ti–xNb–3Zr–2Ta alloys
772
Influence of forging on mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites
773
Influence of form and quantity of selenium on the development and survival of an insect herbivore
774
Influence of form on Tolerance-Map-generated frequency distributions for 1D clearance in design
775
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
776
Influence of former cultivation on the unique Mediterranean steppe of France and consequences for conservation management Original Research Article
777
Influence of formic acid and dry matter on protein degradation in the tanniniferous legume sainfoin
778
Influence of formic acid and water on the [Pd(OAc)2(dppp)] catalyzed ethene–carbon monoxide copolymerization carried out in aprotic organic solvents Original Research Article
779
Influence of formic acid on the microstructure and corrosion resistance of Zn–Ni alloy coatings by electrodeposition
780
Influence of forming atmosphere on the deposition characteristics of 2Cr13 stainless steel during laser solid forming Original Research Article
781
Influence of forming effects on the axial crush response of hydroformed aluminum alloy tubes
782
Influence of forming method on the tensile and fatigue properties of Ti–6Al–4V sheet for helicopter erosion shield applications
783
Influence of forming methods on the microstructure of 3Y-TZP specimens
784
Influence of forming parameters on the final subgrain size during hot rolling of aluminium alloys
785
Influence of formulated chemical cleaning reagents on the surface properties and separation efficiency of nanofiltrationmembranes
786
Influence of formulation and glyphosate salt on absorption and translocation in three annual weeds
787
Influence of formulation and mixing conditions on breadmaking qualities of French frozen dough Original Research Article
788
Influence of Formulation Parameters on the Release of Diclofenace Sodium from Matrices with Manufacturing Formulation Ingredients
789
Influence of formulations on textural, mechanical and structural breakdown properties of cooked yellow alkaline noodles
790
Influence of formwork surface on the orientation of steel fibres within self-compacting concrete and on the mechanical properties of cast structural elements
791
INFLUENCE OF FORTIFICATION OF MULBERRY LEAVES WITH NATURAL AND SYNTHETIC MULTIVITAMINS ON GROWTH AND DEVELOPMENT OF Bombyx mori L.
792
Influence of Foundation Flexibility on R(mu) and C(mu) Factors
793
Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings
794
Influence of foundation species, depth, and location on diversity and community composition at Gulf of Mexico lower-slope cold seeps
795
INFLUENCE OF FOUR DIFFERENT GROUNDED SEEDS ON CONTROLLING Meloidogyne incognita INFECTING TOMATO PLANT UNDER GREENHOUSE CONDITIONS
796
Influence of four different types of organophilic clay on the morphology and thermal properties of polystyrene/clay nanocomposites prepared by using the γ-ray irradiation technique
797
Influence of Four Phlomis Species on Melanogenesis in Human Malignant Melanoma (SKMEL3) Cells
798
Influence of four run-of-river dams on channel morphology and sediment characteristics in Illinois, USA
799
Influence of four-point bending fatigue on the residual stress state of a pressure-rolled, particulate-reinforced metal matrix composite
800
Influence of four-point bending fatigue on the residual stress state of a pressure-rolled, particulate-reinforced metal matrix composite
801
Influence of fractal pore structure in Claus catalyst performance
802
Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al–Mg alloy
803
Influence of fractionated crystallization on the semicrystalline structure of (POM/(PS/PPE)) blends. Static and time-resolved SAXS, WAXD and DSC studies
804
Influence of fracture gap size on the pattern of long bone healing: a computational study
805
Influence of fracture networks on radionuclide transport from solidified waste forms
806
Influence of fracture process zone height on fracture energy of concrete
807
Influence of fracture truncation on dispersion: A dual permeability model
808
Influence of fractures on the development of low-permeability sandstone reservoirs: A case study from the Taizhao district, Daqing Oilfield, China
809
Influence of framework composition over SAPO-34 and MeAPSO-34 acidity Original Research Article
810
Influence of framework silica-to-alumina ratio on the water adsorption and desorption characteristics of MHI-CaX/CaY zeolite Original Research Article
811
Influence of franchisee selection criteria on outcomes desired by the franchisor
812
Influence of free air space on microbial kinetics in passively aerated compost
813
Influence of free edge and corner singularities on interfacial normal strength: application in model unidirectional composites
814
Influence of free edge intralaminar stresses on damage process in CFRP laminates under thermal cycling conditions
815
Influence of free fatty acid content of coconut oil on deposit and performance of plant oil pressure stoves
816
Influence of free surface and interfaces on diffusion coefficients in Pd–Ag and Pd–Au polycrystalline thin films systems
817
Influence of free surface curvature of a liquid layer on the critical Marangoni convection
818
Influence of free volume on the mechanical properties of Epoxy/poly (methylmethacrylate) blends
819
Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests
820
Influence of free-stream turbulence on the movement-induced vibrations of an elongated rectangular cylinder in cross-flow
821
Influence of freeze-drying conditions on survival of Oenococcus oeni for malolactic fermentation
822
Influence of freeze-drying conditions on the mesoporosity of organic gels as carbon precursors Original Research Article
823
Influence of freeze–thaw cycles on properties of asphalt-modified epoxy repair materials
824
Influence of freeze–thaw on engineering properties of a silty soil
825
Influence of freeze–thaw on the polishing resistance of coarse aggregates on road surface
826
Influence of freeze–thaw on the stored free energy in soils
827
Influence of freezing and thawing on the hydration characteristics, quality, and consumer acceptance of whole muscle beef injected with solutions of salt and phosphate
828
Influence of Freezing on Muscles of Rainbow Trout (Oncorhynchus mykiss): A Histological and Microbiological Study
829
Influence of freezing rate on pore structure in freeze-dried collagen-GAG scaffolds
830
Influence of freezing rate variation on the microstructure and physicochemical properties of food emulsions Original Research Article
831
Influence of Freezing Temperature on Hydraulic Conductivity of Silty Clay
832
Influence of freezing test methods, composition and microstructure on frost durability assessment of clay roofing tiles
833
Influence of Frequency and Bias Current on Asymmetrical GMI Effect in Co71.8 Fe4.9 Nb0.8 Si7.5 B15 Amorphous Glass-Covered Wires Original Research Article
834
Influence of frequency and current waveform on low-pressure sodium lamp operation
835
Influence of frequency and DC bias on magneto-impedance behaviors in double-MgO magnetic tunnel junctions
836
Influence of frequency and exposure to a saline solution on the corrosion fatigue crack growth behavior of the aluminum alloy 2024
837
Influence of frequency and waveform on corrosion fatigue crack propagation in the 2024-T351 aluminium alloy in the S–L orientation
838
INFLUENCE OF FREQUENCY MODULATION OF THE REFLECTED ACOUSTIC SIGNAL ON THE ERROR OF AN ULTRASONIC VIBRATION TRANSDUCER
839
Influence of Frequency of Wave Action on Oil Production
840
Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag
841
Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag
842
Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn–3.5Ag
843
Influence of frequency, grade, moisture and temperature on Green River oil shale dielectric properties and electromagnetic heating processes
844
Influence of frequency-dependent properties on system identification: Simulation study on a human pelvis model
845
Influence of Fresh and Thermoxidized Carotino Oil on Cyclic Guanosine Monophosphate (cGMP) in Erythrocytes from Sprague Dawley Rats
846
Influence of fresh date palm co-products on the ripening of a paprika added dry-cured sausage model system
847
Influence of fresh water, nutrients and DOC in two submarine-groundwater-fed estuaries on the west of Ireland Original Research Article
848
Influence of Fresh, Composted and Vermicomposted Parthenium hysterphorus and Poultry Droppings on Quality Parametres of Radish
849
Influence of Freshness and Frozen Storage Temperature on Quality of Thawed Cod Fillets Stored in Modified Atmosphere Packaging
850
Influence of freshwater discharges and tides on the abundance and distribution of larval and juvenile Munida gregaria in the Baker river estuary, Chilean Patagonia
851
Influence of freshwater flow, ocean exchange, and seasonal cycles on phytoplankton – nutrient dynamics in a temporarily open estuary
852
Influence of freshwater inflow on the inorganic nutrient and dissolved organic matter within coastal sea ice and underlying waters in the Gulf of Finland (Baltic Sea)
853
Influence of freshwater inflow variability on the Douro estuary primary productivity: A modelling study
854
Influence of freshwater inflow variability on the Douro estuary primary productivity: A modelling study
855
Influence of fretting regimes on the tribocorrosion behaviour of Ti6Al4V in 0.9 wt.% sodium chloride solution
856
Influence of Friction Condition on Cold Upsetting of Tube Flange
857
Influence of friction in material characterization in microindentation measurement
858
Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating
859
INFLUENCE OF FRICTION ON CONTACT STRENGTH AND ADAPTABILITY OF NOVIKOV GEAR DRIVES
860
Influence of friction on die filling in counterblow hammer forging
861
Influence of friction on the surface characteristics of EPDM elastomers with different carbon black contents
862
Influence of Friction Stir Processing Parameters on the Mechanical and Corrosion Properties of Al-Cu-Li Alloy
863
Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy
864
Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy
865
Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds
866
Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints
867
Influence of friction stir welding residual stresses on the compressive strength of aluminium alloy plates
868
Influence of Friction Stir Welding Variables on Hardness, UTS and Yield Strength of Joints Produced in SSM Cast A356 Aluminum Alloy
869
Influence of frictional anisotropy on contacting surfaces during loading/unloading cycles
870
Influence of frictional heating on temperature gradients in ultra-high-pressure liquid chromatography on 2.1 mm I.D. columns
871
Influence of front contact work function on silicon heterojunction solar cell performance
872
Influence of front electrode and back reflector electrode on the performances of microcrystalline silicon solar cells
873
Influence of Front Row Burden on Fragmentation, Muckpile Shape, Excavator Cycle Time, and Back Break in Surface Limestone Mines
874
Influence of frothers on the detachment of galena particles from bubbles
875
Influence of frozen capillary waves on contact mechanics
876
Influence of frozen storage on bread enriched with different ingredients Original Research Article
877
Influence of frozen storage on textural properties of sardine (Sardina pilchardus) mince gels
878
Influence of FRP anchors on the strength and ductility of FRP-strengthened RC slabs
879
Influence of FRP confinement on bond behavior of corroded steel reinforcement
880
Influence of FRP wrapping techniques on the compressive behavior of concrete prisms
881
Influence of fructooligosaccharides on Peyer’s patch lymphocyte numbers in healthy and endotoxemic mice
882
Influence of fruit and vegetable extracts on lipid peroxidation in microsomes containing specific cytochrome P450s
883
Influence of fruit ripeness and salt concentration on the microbial processing of Arbequina table olives Original Research Article
884
Influence of fruit ripening on ‘Cornicabra’ virgin olive oil quality A study of four successive crop seasons
885
Influence of fruit ripening process on the natural antioxidant content of Hojiblanca virgin olive oils
886
Influence of Frying Conditions and Wild Sage Seed Mucilage Coating on the Physical Properties and Oil Uptake of Zucchini Slices during Deep-Fat Frying
887
Influence of frying conditions on acrylamide content and other quality characteristics of French fries
888
Influence of frying conditions on acrylamide content and other quality characteristics of French fries
889
Influence of frying fat on the formation of heterocyclic amines in fried beefburgers and pan residues
890
Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds
891
Influence of fuel additives on performance of direct-injection Diesel engine and exhaust emissions when operating on shale oil
892
Influence of fuel and air/fuel equivalence ratio on the emission of hydrocarbons from a SI engine. 1. Experimental findings
893
Influence of fuel and air/fuel equivalence ratio on the emission of hydrocarbons from a SI engine. 2. Formation pathways and modelling of combustion processes
894
Influence of fuel ash composition on high temperature aerosol formation in fixed bed combustion of woody biomass pellets
895
Influence of fuel bundle loading errors on the subcritically during refueling campaigns for the present BWR cores of KRB-II
896
Influence of fuel composition on chemiluminescence emission in premixed flames of CH4/CO2/H2/CO blends
897
Influence of fuel composition on polycyclic aromatic hydrocarbon emissions from a fleet of in-service passenger cars
898
Influence of fuel costs on seawater desalination options Original Research Article
899
Influence of fuel feeding positions on gasification in dual fluidized bed gasifiers
900
Influence of fuel fraction gradient on triple flame velocity in plain and axis-symmetrical channels
901
Influence of fuel oxygen content on diesel engine exhaust emissions
902
Influence of fuel particle size on gasification in a dual fluidized bed steam gasifier
903
Influence of fuel properties and composition on NOx emissions from biodiesel powered diesel engines: A review
904
Influence of fuel ratios on auto combustion synthesis of barium ferrite nano particles
905
Influence of fuel sulfur on the characterization of PM10 from a diesel engine
906
Influence of Fuel Type on Ultrasonic-assisted Combustion Synthesis of NiMo/ Al2O3 Catalyst for Hydrodesulfurization of Thiophene
907
Influence of fuel volatility and spray parameters on combustion characteristics and NOx emission in a gas turbine combustor
908
Influence of fuels and combustion aids on solution combustion synthesis of bi-phasic calcium phosphates (BCP)
909
Influence of fuels on the morphology of undoped Y3Al5O12 and photoluminescence of Y3Al5O12:Eu3+ prepared by a combustion method
910
Influence of fuel-to-oxidizer ratio on the magnetic properties of Fe-doped In2O3 nanoparticles synthesized by solution combustion method
911
Influence of fuel-to-oxidizer ratio on the magnetic properties of Fe-doped In2O3 nanoparticles synthesized by solution combustion method
912
Influence of Full and Symmetrical Domains on the Numerical Flow around a SUBOFF Submarine Model using OpenFOAM
913
Influence of fullerene derivative replacement with TiO2 nanoparticles in organic bulk heterojunction solar cells
914
Influence of fumed silica and additives on the gel formation and performance of gel valve-regulated lead-acid batteries
915
Influence of fumigation methanol on the combustion and particulate emissions of a diesel engine
916
Influence of Functional Alloy on Crystal Structure and Properties of Scales
917
Influence of functional bracing on the kinetics of anterior cruciate ligament-injured knees during level walking
918
Influence of functional group effect on the K-shell X-ray production cross-sections and average fluorescence yields of sulphur in 1,2,4-triazol-5-one compounds containing thiophene
919
Influence of functional groups on the adsorption behaviour of substituted benzoic acids at the α-alumina/water interface
920
Influence of functional groups on the Cα–Cβ chain of l-phenylalanine and its derivatives
921
Influence of functional groups on the Cα–Cβ chain of l-phenylalanine and its derivatives
922
Influence of functional groups on the in vitro anticoagulant activity of chitosan sulfate Original Research Article
923
Influence of Functional Nutrients on Insulin Resistance in Horses with Equine Metabolic Syndrome
924
Influence of functional tricuspid regurgitation on right ventricular function
925
Influence of functionalization on interaction and drug release from α,β-polyaspartylhydrazide derivatives to a biomembrane model: evaluation by differential scanning calorimetry technique
926
Influence of functionalization on properties of MWCNT–epoxy nanocomposites
927
Influence of functionalized fullerene structure on polymer photovoltaic degradation
928
Influence of functionalized nanoparticles on conformational stability of type I collagen for possible biomedical applications
929
Influence of Fungal Elicitors on Production of Ajmalicine by Cell Cultures of Catharanthus roseus
930
Influence of Fungal Enzyme Pre-treatment on Totally Chlorine-free (TCF) Bleaching of Dimethyl Formamid Bagasse Pulp
931
INFLUENCE OF FUNGAL EXTRACTS, BOTANICAL EXTRACTS AND SYNTHETIC INSECTICIDE ON LARVAL MORTALITY AND REPELLENCY OF ANGOUMOIS GRAIN MOTH, SITOTROGA CEREALELLA (LEPIDOPTERA: GELECHIIDAE)
932
Influence of fungicide and sowing density on the growth and yield of two groundnut cultivars
933
Influence of fungicide spray schedules on the sensitivity of Cercospora beticola to the sterol demethylation-inhibiting fungicide flutriafol
934
Influence of Fusarium Crown Rot Disease on Semiochemical Production by Wheat Plants
935
Influence of Fusarium oxysporum-resistant pumpkin rootstock on the productivity of the F1 Asylum cucumber hybrid
936
Influence of fused zirconium corundum addition on properties of chrome-free castables for RH refining furnace
937
Influence of fusing temperature on microstructure, wear and corrosion resistance of induction melted bimetal of Co-based alloy and AISI 4140 steel
938
Influence of fusion barrier distributions on spin populations Original Research Article
939
Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced high strength steel
940
Influence of fuzzy Goal Programming in Production Optimization Case study: Cement Industry
941
Influence of fuzzy norms and other heuristics on “Mixed fuzzy rule formation” Original Research Article
942
Influence of G308A polymorphism of tumor necrosis factor-α gene on inflammatory markers in postsurgical head and neck cancer patients with early enteral nutrition
943
Influence of G308A Promoter Variant of Tumor Necrosis Factor-α Gene on Insulin Resistance and Weight Loss Secondary to Two Hypocaloric Diets: A Randomized Clinical Trial
944
Influence of Ga addition on the methanol synthesis activity of Cu/ZnO catalyst in the presence and absence of alumina
945
Influence of Ga incorporation on photoinduced phenomena in Ge–S based glasses
946
Influence of Ga+ ion irradiation on magnetoresistance and exchange bias of IrMn/CoFe/Cu/CoFe/NiFe spin valve
947
Influence of GA3 and boric acid foliar application on bioactive compounds and quality of pomegranate fruit (Punica granatum L.)
948
Influence of Ga3+ ions on spectroscopic and dielectric features of multi component lithium lead boro bismuth silicate glasses doped with manganese ions
949
Influence of GAA expansion size and disease duration on central nervous system impairment in Friedreichʹs ataxia: contribution to the understanding of the pathophysiology of the disease
950
Influence of GaAs(0 0 1) pregrowth surface morphology and reconstruction on the growth of InGaAs layers
951
Influence of gadolinium concentration on the ESR spectrum of Gd3+ in CaO
952
Influence of gadolinium concentration on the ESR spectrum of Gd3+ in MgO
953
Influence of gadolinium on microstructure and magnetic properties of sintered NdGdFeB magnets
954
Influence of gait speed on stability: recovery from anterior slips and compensatory stepping
955
Influence of galangin on HL-60 cell proliferation and survival
956
Influence of gallium on the properties of Pt–Re/Al2O3 naphtha reforming catalysts Original Research Article
957
Influence of galvanization on the corrosion fatigue performance of high-strength steel
958
Influence of gamma irradiation effects on the residual alteration rate of the French SON68 nuclear glass
959
Influence of gamma irradiation in the antioxidant potential of chestnuts (Castanea sativa Mill.) fruits and skins
960
Influence of gamma irradiation on surface potential decay of corona charged polyethylene
961
Influence of gamma irradiation on the chemical and physical properties of DGEDDS / PDA and DGEDDS / MDA epoxy resins
962
Influence of gamma radiation on nutrient contents of canned tomato paste
963
Influence of Gamma Radiation on Some Optical Properties and Urbach Energy of (PMMA- Doped Red Methyl) Films
964
Influence of gamma ray irradiation on metakaolin based sodium geopolymer
965
Influence of Gamma Rays on the Performance and Genetic Parameters for Grain Yield and Yield Attributes of Bread Wheat
966
Influence of gamma-irradiation sterilization and temperature on the fracture toughness of ultra-high-molecular-weight polyethylene
967
Influence of gamma-radiation on mycotoxin producing moulds and mycotoxins in fruits
968
Influence of gap size and development stages on the silvicultural characteristics of oriental beech (Fagus orientalis Lipsky) regeneration
969
Influence of gap size on wind damage variables in a forest
970
Influence of gap states on the electrical stability of pentacene thin film transistors
971
Influence of gas and treatment time on the surface modification of EPDM rubber treated at afterglow microwave plasmas
972
Influence of gas atmosphere and hard particle addition on the sintering behavior of high alloyed PM cold work tool steels
973
Influence of gas components on removal of SO2 from flue gas in the semidry FGD process with a powder–particle spouted bed
974
Influence of gas composition on the reactivity of cokes
975
Influence of gas compression on flame acceleration in channels with obstacles
976
Influence of gas compression on flame acceleration in the early stage of burning in tubes
977
Influence of gas emission on heat transfer in porous ceramics
978
Influence of gas environment on reactions between sodium and silicon minerals during gasification of low-rank coal
979
Influence of gas flow on argon microwave plasma jet at atmospheric pressure
980
Influence of gas flow rate and entry point on ion charge, ion counts and ion energy distribution in a filtered cathodic arc
981
Influence of gas flow rate and frothers on water recovery in a froth column
982
Influence of gas flow rate on oxygen flux measurements for dense oxygen conducting ceramic membranes
983
Influence of gas flow rate on the microstructure and mechanical properties of hydroxyapatite coatings fabricated by gas tunnel type plasma spraying
984
Influence of gas flow-induced shear stress on the operation of the Anammox process in a SBR Original Research Article
985
Influence of gas injection on phase inversion in an oil–water flow through a vertical tube
986
Influence of Gas Insulated Switchgear Configuration Components on UHF PD Signals
987
Influence of gas nitriding of Ti6Al4V alloy at high temperature on the adhesion of Staphylococcus aureus
988
Influence of gas nitriding pressure on the surface properties of ASTM F138 stainless steel
989
Influence of gas pressure on the plasma reaction on polyethersulphone
990
Influence of gas production induced volumetric strain on permeability of coal
991
Influence of gas residence time and air ratio on the air gasification of dried sewage sludge in a bubbling fluidised bed
992
Influence of gas sparging on clarification of pineapple wine by microfiltration Original Research Article
993
Influence of gas to particle conversion on the modal size distribution of atmospheric particles
994
Influence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks
995
Influence of gas velocity and electric field intensity on particle deposit and re-entrainment phenomena in an electrostatic precipitator
996
Influence of gas velocity on particulate fouling of exhaust gas recirculation coolers
997
Influence of gaseous end-products inhibition and nutrient limitations on the growth and hydrogen production by hydrogen-producing fermentative bacterial B49
998
Influence of gaseous hydrogen on the notched tensile strength of D6ac steel
999
Influence of gaseous hydrogen on the notched tensile strength of D6ac steel
1000
Influence of gaseous hydrogen on the tensile properties of Fe–36Ni INVAR alloy