ليست عنوان مقالات لاتين Microstructural evolution of CANDU spacer material Inconel X-750 under in situ ion irradiation Microstructure and fracture characteristics of spot-welded DP600 steel

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructural evolution of CANDU spacer material Inconel X-750 under in situ ion irradiation

2

Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent aging Original Research Article

3

Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results

4

Microstructural evolution of cerium-based coatings on AZ31 magnesium alloys

5

Microstructural evolution of char under oxidation induced by uneven heating

6

Microstructural evolution of cobalt-doped barium cerate–zirconate at elevated temperatures under moist reducing conditions

7

Microstructural evolution of CoCrAlY bond coat on Ni-based superalloy DZ 125 at 1050 °C

8

Microstructural evolution of commercial pure iron during directional annealing

9

Microstructural evolution of copper clad steel bimetallic wire

10

Microstructural evolution of Cr–Mn–N austenitic steels during cold work hardening

11

Microstructural evolution of Cu-1 at% Ti alloy aged in a hydrogen atmosphere and its relation with the electrical conductivity

12

Microstructural evolution of Cu-1 at% Ti alloy aged in a hydrogen atmosphere and its relation with the electrical conductivity

13

Microstructural evolution of decagonal quasicrystal in the undercooled Al72Ni12Co16 alloy melts

14

Microstructural evolution of deformation-modified primary halite from the Middle Triassic Röt Formation at Hengelo, The Netherlands

15

Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep

16

Microstructural evolution of dilute Al–Mg alloys during processing by equal channel angular pressing and during subsequent annealing

17

Microstructural evolution of dilute Al–Mg alloys during processing by equal channel angular pressing and during subsequent annealing

18

Microstructural evolution of dual multi-phase intermetallic alloys composed of geometrically close packed Ni3X (X: Al and V) type structures

19

Microstructural evolution of duplex grain structure and interpretation of the mechanism for NiO scales grown on pure Ni- and Cr-doped substrates during high temperature oxidation

20

Microstructural evolution of duplex grain structure and interpretation of the mechanism for NiO scales grown on pure Ni- and Cr-doped substrates during high temperature oxidation

21

Microstructural evolution of electrically activated polypropylene/layered silicate nanocomposites investigated by in situ synchrotron wide-angle X-ray scattering and dielectric relaxation analysis

22

Microstructural Evolution of Electrochemically Cycled Si-Doped SnO2–Lithium Thin-Film Battery

23

Microstructural evolution of fast-fired nickel–zinc ferrites from hydrothermal nanopowders

24

Microstructural evolution of Fe–32%Ni alloy during large strain multi-axial forging

25

Microstructural evolution of Fe-rich particles in an Al–Zn–Mg–Cu alloy during equal-channel angular pressing

26

Microstructural evolution of fusion zone in laser beam welds of pure titanium

27

Microstructural Evolution of Gas Atomized Fe-25Cr-3. 2C Alloy Powders Original Research Article

28

Microstructural evolution of gold–aluminum wire-bonds

29

Microstructural evolution of IF-steel during cold rolling Original Research Article

30

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

31

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

32

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

33

Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering

34

Microstructural evolution of intermetallic layer in hot-dipped aluminide mild steel with silicon addition

35

Microstructural evolution of iron based metal–matrix composites submitted to simple shear

36

Microstructural evolution of irradiated tungsten: Ab initio parameterisation of an OKMC model

37

Microstructural evolution of magnesia-based castables containing microsilica

38

Microstructural evolution of martensitic 100Cr6 bearing steel during tempering: From thermoelectric power measurements to the prediction of dimensional changes Original Research Article

39

Microstructural evolution of Mg–Al–Ca–Sr alloy during creep

40

Microstructural evolution of mullite during the sintering of kaolin powder compacts

41

Microstructural evolution of multi-walled carbon nanotubes in the presence of mixture of silicon and silica powders at high temperatures

42

Microstructural evolution of nanocrystalline Al2O3 sintered at a high heating rate

43

Microstructural evolution of nanocrystalline chips particles produced via large strain machining during ball milling

44

Microstructural evolution of nanosized tungsten carbide during heatup stage of sintering of electroless nickel-coated nanostructured WC–Co powder

45

Microstructural evolution of nanostructured Ti0.7Ni0.3N prepared by reactive ball-milling

46

Microstructural evolution of NbF5-doped MgH2 exhibiting fast hydrogen sorption kinetics

47

Microstructural evolution of nickel-doped 9Cr steels irradiated in HFIR

48

Microstructural evolution of nuclear grade graphite induced by ion irradiation at high temperature environment

49

Microstructural evolution of oxides and semiconductor thin films

50

Microstructural evolution of P92 ferritic/martensitic steel under Ar+ ion irradiation at elevated temperature

51

Microstructural evolution of P92 ferritic/martensitic steel under argon ion irradiation

52

Micro-structural evolution of phenol-formaldehyde resin modified by boron carbide at elevated temperatures

53

Microstructural evolution of platinum modified nickel aluminide bond coat during thermal cycling

54

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

55

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

56

Microstructural evolution of previously deformed ZA27 alloy during partial remelting

57

Microstructural evolution of proton irradiated T91

58

Microstructural evolution of PST-TiAl during low-rate compressive micro-straining at 1023 K in hard and soft orientations

59

Microstructural evolution of Pt-aluminide coating influenced by cycle oxidation service conditions

60

Microstructural evolution of reactive-sintered aluminum matrix composites

61

Microstructural evolution of reinforcements in the remelting in situ TiC/Al–12Si composites treated by ultrasonic vibration

62

Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment

63

Microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment Original Research Article

64

Microstructural Evolution of Roll Bonded AlClad Stainless Steel Sheets at Elevated Temperatures

65

Microstructural evolution of SINQ irradiated austenitic stainless steels

66

Microstructural evolution of slowly solidified Cu-Ti-Zr-Ni amorphous alloy

67

Microstructural evolution of spinodally formed Fe35Ni15Mn25Al25

68

Microstructural evolution of superplasticity in large-grained Ni–48Al intermetallics

69

Microstructural evolution of superplasticity in large-grained Ni–48Al intermetallics

70

Microstructural Evolution of Surface Layer of TWIP Steel Deformed by Mechanical Attrition Treatment Original Research Article

71

Microstructural evolution of the deformed volume beneath microindents in tungsten and copper Original Research Article

72

Microstructural evolution of the NiCrAlY/CrON duplex coating system and its influence on mechanical properties

73

Microstructural evolution of the rapidly quenched Fe–Cr–B alloy thermal spray coatings

74

Microstructural evolution of the rapidly quenched Fe–Cr–B alloy thermal spray coatings

75

Microstructural evolution of the Seridَ Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

76

Microstructural evolution of thixomolded AZ91D magnesium alloy with process parameters variation

77

Microstructural evolution of Ti–6Al–4V during the sintering of microspheres of Ti for orthopedic implants

78

Microstructural evolution of transparent glass-ceramics containing Co2+: MgAl2O4 nanocrystals

79

Microstructural evolution of tungsten oxide thin films

80

Microstructural evolution of twin-roll cast Mg–3Al–0.5Mn–0.2Mm alloys during warm rolling and subsequent annealing

81

Microstructural evolution of wear-resistant FeCrB and FeCrNiCoB coating alloys during high-energy mechanical attrition

82

Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation

83

Microstructural evolution of Y2O3 and MgAl2O4 ODS EUROFER steels during their elaboration by mechanical milling and hot isostatic pressing

84

Microstructural evolution of YSZ electrolyte aerosol-deposited on porous NiO-YSZ

85

Microstructural evolution of ZrB2–MoSi2 composites during heat treatment

86

Microstructural evolution on ball-milling elemental blends of Ni, Al and Ti by Rietveld’s method

87

Microstructural evolution on streamlines during hot strip rolling using internal state variables

88

Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression

89

Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression

90

Microstructural evolution resulting from ionic diffusion in an electric field

91

Microstructural evolution resulting from ionic diffusion in an electric field

92

Micro-structural evolution subjected to combined tension–torsion deformation for pure copper

93

Microstructural evolution under high flux irradiation of dilute Fe–CuNiMnSi alloys studied by an atomic kinetic Monte Carlo model accounting for both vacancies and self interstitials

94

Microstructural evolution under load and high temperature deformation mechanisms of a mullite/alumina fibre

95

Microstructural evolution upon annealing in Ar-implanted Si

96

Microstructural evolution, creep, and tensile behavior of a Ti–22Al–25Nb (at%) orthorhombic alloy

97

Microstructural evolution, microhardness and thermal stability of HPT-processed Cu

98

Microstructural evolution, microhardness and thermal stability of HPT-processed Cu

99

Microstructural evolutions and cyclic softening of 9%Cr martensitic steels

100

Microstructural Evolutions and Mechanical Properties of Transient Liquid Phase Bonded WC-Co/St52 with BNi-2 Interlayer

101

Microstructural evolutions of LDPE/PA6 blends by rheological and rheo-optical analyses: Influence of flow and compatibilizer on break-up and coalescence processes

102

Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing Original Research Article

103

Microstructural examination and properties of premixed Al–Cu–Mg powder metallurgy alloy

104

Microstructural examination of concrete exposed to elevated temperature by using plane polarized transmitted light method

105

Microstructural examination of high temperature creep failure of Zircaloy-2 cladding in irradiated PHWR fuel pins

106

Microstructural examination of irradiated and unirradiated V–4Cr–4Ti pressurized creep tubes

107

Microstructural examination of layered coatings by scanning electron microscopy, transmission electron microscopy, and atomic force microscopy

108

Microstructural examination of low activation ferritic steels following irradiation in ORR at 330 and 400 °C to ∼10 dpa

109

Microstructural examination of oxide layers formed on an oxide dispersion strengthened ferritic steel exposed to supercritical water

110

Microstructural examination of quasi-static and dynamic shear in high-purity iron

111

Microstructural examination of service exposed coal mill liner material

112

Microstructural examination of V–(3–6%)Cr–(3–5%)Ti irradiated in the ATR-A1 experiment

113

Microstructural examination of V–(Fe or Cr)–Ti alloys after thermal-creep or irradiation-creep tests

114

Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy Original Research Article

115

Microstructural factors affecting hardness property of dual two-phase intermetallic alloys based on Ni3Al–Ni3V pseudo-binary alloy system

116

Microstructural factors controlling the survival of food-borne pathogens in porous media

117

Microstructural factors determining mechanical properties of laser-welded Ti–4.5Al–2.5Cr–1.2Fe–0.1C alloy for use in next-generation aircraft

118

Microstructural factors important for the development of high critical current density Nb3Sn strand Original Research Article

119

Microstructural factors of low cycle fatigue damage in two phase Al–Si alloys

120

Microstructural factors of low cycle fatigue damage in two phase Al–Si alloys

121

Microstructural factors that determine the weldability of a high Cr-high Si HK 40 alloy

122

Microstructural failure modes in three-phase glass syntactic foams

123

Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis

124

Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite

125

Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating

126

Microstructural features and deformation-induced lattice defects in hot-extruded Bi2Te3 thermoelectric compound

127

Microstructural features and domain formation in (Ba,Sr)2TiSi2O8 fresnoites

128

Microstructural features and electrical properties of copper oxide added potassium sodium niobate ceramics

129

Microstructural features and mechanical properties of Al 5083/SiCp metal matrix nanocomposites produced by high energy ball milling and spark plasma sintering

130

Microstructural features and mechanical properties of AM60 and AZ31 friction stir spot welds

131

Microstructural features and orientation correlations of non-modulated martensite in Ni–Mn–Ga epitaxial thin films

132

Microstructural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOF process

133

Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C

134

Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy Original Research Article

135

Microstructural features of composite whey protein/polysaccharide gels characterized at different length scales

136

Microstructural features of consecutive layers of Stellite 6 deposited by laser cladding

137

Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800

138

Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800

139

Microstructural Features of Friction-Welded Ti-6AI-4V Joint

140

Microstructural features of intergranular brittle fracture and cold cracking in high strength aluminum alloys

141

Microstructural features of nanocomposite of alumina@carbon nanotubes/alumina nanoparticles synthesized by a solvothermal method

142

Microstructural features of pulsed-laser deposited V2O5 thin films

143

Microstructural features of TA15 titanium alloy under different temperature routes in isothermal local loading forming

144

Microstructural features of the ZrO2 interfacial coatings on SiC fibers before and after exposition to air at high temperatures

145

Microstructural features, diffusion and molecular relaxations in polyimide/silica hybrids

146

Microstructural features, texture and strengthening mechanisms of nanostructured AA6063 alloy processed by powder metallurgy

147

Microstructural formation in a hypereutectic Mg–Si alloy

148

Microstructural formations and phase transformation pathways in hot isostatically pressed tantalum carbides Original Research Article

149

Microstructural gradients in Ti–3Al–8V–6Cr–4Zr–4Mo for excellent HCF strength and toughness

150

Microstructural gradients in Ti–3Al–8V–6Cr–4Zr–4Mo for excellent HCF strength and toughness

151

Microstructural heterogeneities and fatigue anisotropy of forged steels

152

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites Original Research Article

153

Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing

154

Microstructural homogenization of ECAPed copper through post-rolling

155

Microstructural identification of thaumasite in concrete by backscattered electron imaging at low vacuum

156

Microstructural implications of non-random nucleation protocols in nanocrystallized metallic glasses

157

Microstructural improvement of sputtered ZrO2 thin films by substrate biasing

158

Microstructural improvements of the gradient composite material Pr0.6Sr0.4Fe0.8Co0.2O3/Ce0.8Sm0.2O1.9 by employing vertically aligned carbon nanotubes

159

Microstructural Indicators of Quality-related Characteristics of Blueberries-An Integrated Approach

160

Microstructural influence on erosion behaviour of thermal spray coatings

161

Microstructural influence on fatigue properties of a high-strength spring steel

162

Microstructural influence on fatigue properties of a high-strength spring steel

163

Microstructural influence on high temperature creep flow of Zr–1%NbO alloy in near-α, (α + β), and β temperature ranges in a high vacuum environment

164

Microstructural influence on low-temperature superplasticity of ultrafine-grained Ti–6Al–4V alloy

165

Microstructural influence on small fatigue cracks in a ferritic–martensitic steel

166

Microstructural influence on the early stages of interreaction of Al/Ni-investigated by TAP and HREM

167

Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

168

Microstructural influence on the intrinsic fatigue properties of AlLi 8090 alloy

169

Microstructural influences on consolidation behavior of titanium metal matrix composites

170

Microstructural influences on consolidation behavior of titanium metal matrix composites

171

Microstructural influences on consolidation behavior of titanium metal matrix composites

172

Microstructural influences on hydrogen delayed fracture of high strength steels

173

Microstructural influences on the decomposition of an Al-containing ferritic stainless steel

174

Microstructural influences on the growth of small cracks in Ti-6Al-4 V

175

Microstructural inhomogeneities in Cu–Ag–Zr alloys due to heavy plastic deformation

176

Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing

177

Microstructural inhomogeneity and biaxial stretching limits in aluminium alloy AA6016

178

Microstructural inhomogeneity in plasma-sprayed hydroxyapatite coatings and effect of post-heat treatment

179

Microstructural insight into pedestrian pelvic fracture as assessed by high-resolution computed tomography

180

Microstructural instability and embrittlement behaviour of an Al-lean, high-Nb γ-TiAl-based alloy subjected to a long-term thermal exposure in air

181

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

182

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

183

Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation

184

Microstructural instability in coated single crystal superalloys

185

Micro-structural integrity of dental enamel subjected to two tooth whitening regimes

186

Microstructural integrity of the corpus callosum linked with neuropsychological performance in adolescents

187

Microstructural interpretation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites

188

Microstructural investigation and the creep behavior of Mg–Sr–Mn alloys

189

Microstructural Investigation into Premature Failure of Compressor Turbine (CT) Blade Material of High Pressure (HP) PT6A-114A Engine

190

Microstructural investigation of a new complex oxide Ho2Mn2/3Nb4/3O7 with a pyrochlore-related structure

191

Microstructural investigation of a silica fume–cement–lime mortar

192

Microstructural investigation of AA 2195 T81 chips formed during a metal-cutting process

193

Microstructural investigation of Alloy 617 corroded in high-temperature helium environment

194

Microstructural Investigation of BaTiO3 Plasma Sprayed Coating Deposited by Splash and Disk-Like Splats

195

Microstructural investigation of cast medium-manganese austenitic steel with composite surface

196

Microstructural Investigation of Compressive Strength and Permeability of Concrete Containing Fly Ash in the Marine Environment of the Persian Gulf

197

Microstructural investigation of Cr–Hf–Si alloys

198

Microstructural investigation of Cu/Co multilayer films

199

Microstructural investigation of Cu/Co multilayer films

200

Microstructural investigation of dense membranes in relation to their gas transport properties

201

Microstructural investigation of deteriorated Portland cement concretes

202

Microstructural investigation of electrochemical hydrogen storage in amorphous Mg–Ni–La alloy

203

Microstructural investigation of friction stir welded 7050-T651 aluminium Original Research Article

204

Microstructural investigation of hexagonal-shaped diamond nanoplatelets grown by microwave plasma chemical vapor deposition

205

Microstructural investigation of ice surfaces after rubber–ice and sand–ice sliding friction tests

206

Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion

207

Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion

208

Microstructural investigation of Nd-rich phase in sintered Nd-Fe-B magnets through electron microscopy

209

Microstructural investigation of nimesulide–crospovidone composites by X-ray diffraction and thermal analysis

210

Microstructural investigation of nimesulide–crospovidone composites by X-ray diffraction and thermal analysis

211

Microstructural investigation of phase transformations and properties during thermal processing of a 6 w/oAl-modified Ni–Cr–Fe ternary alloy

212

Microstructural investigation of Si-ion-irradiated single crystal 3C-SiC and SA-Tyrannohex SiC fiber-bonded composite at high temperatures

213

Microstructural investigation of Sr-modified Al–15 wt%Si alloys in the range from micrometer to atomic scale

214

Microstructural investigation of Sr-modified Al–15 wt%Si alloys in the range from micrometer to atomic scale

215

Microstructural investigation of the annealing behaviour of high-pressure torsion (HPT) deformed copper

216

Microstructural investigation of the effects of oxygen exposure on NARloy-Z

217

Microstructural investigation of the effects of oxygen exposure on NARloy-Z

218

Microstructural investigation of the PZT films prepared from the suspension of nanocrystalline powders

219

Microstructural investigation of the stability under irradiation of oxide dispersion strengthened ferritic steels

220

Microstructural investigation of the volume beneath nanoindentations in copper Original Research Article

221

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

222

Microstructural investigation of Ti/Au ohmic contacts on Ga doped single crystalline n-ZnO films

223

Microstructural investigation of uranium rich U–Zr–Nb ternary alloy system

224

Microstructural investigation of white etching layer on pearlite steel rail

225

Microstructural investigation on B4C/Al-7093 composite

226

Microstructural investigation on B4C/Al-7093 composite

227

Microstructural investigation on deformation behavior of high purity Fe–Cr–Ni austenitic alloys during tensile testing at different temperatures

228

Microstructural investigation on the mechanism to extract indium from wasted materials

229

Microstructural investigation on the mechanism to extract indium from wasted materials

230

Microstructural investigation on the relationship between microstructure and compressive strength of cement mortars

231

Microstructural investigation, using small-angle neutron scattering (SANS), of Optifer steel after low dose neutron irradiation and subsequent high temperature tempering

232

Microstructural investigation, using small-angle neutron scattering, of neutron irradiated Eurofer97 steel

233

Microstructural Investigations and Fracture Analysis of a Multi-Layer Al Panel of a Crashed Aircraft

234

Microstructural investigations in cordierite–mullite refractories

235

Micro-structural investigations in the glacial state of triphenyl phosphite

236

Microstructural investigations into the low cycle fatigue deformation of a Cu–Cr–Zr–Ti alloy

237

Microstructural investigations of ferrite nanoparticles prepared by nonaqueous precipitation route

238

Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites

239

Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites Original Research Article

240

Microstructural Investigations of Nanostructured La (Sr)MnO3-(delta) Films Deposited by Electrostatic Spray Deposition

241

Microstructural investigations of naturally and artificially weathered autoclaved aerated concrete

242

Microstructural investigations of reduced magnesium titanate spinels which have shown anomalous resistance behaviour

243

Microstructural investigations of strain-related collagen mineralization

244

Microstructural investigations on aerated concrete

245

Microstructural investigations on as-cast and annealed Al–Sc and Al–Sc–Zr alloys

246

Microstructural investigations on strongly stained olivines of the chassignite NWA 2737 and implications for its shock history

247

Microstructural investigations on zirconium oxide–carbon nanotube composites synthesized by hydrothermal crystallization Original Research Article

248

Microstructural kinetics of phase transformations during electrochemical reduction of titanium dioxide in molten calcium chloride Original Research Article

249

Microstructural length-scale effects in the nanoindentation behavior of thin gold films Original Research Article

250

Microstructural manifestation of dynamic strain aging in AISI 316 stainless steel

251

Microstructural manifestations in color: Some applications for steels

252

Microstructural manipulation of electrospun scaffolds for specific bending stiffness for heart valve tissue engineering

253

Microstructural mechanical properties and yield point effects in Mo alloys

254

Microstructural mechanical properties and yield point effects in Mo alloys

255

Microstructural mechanisms controlling fatigue crack growth in Al–Si–Mg cast alloys

256

Microstructural mechanisms controlling fatigue crack growth in Al–Si–Mg cast alloys

257

Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure

258

Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure

259

Microstructural mechanisms governing the fatigue failure of polyamide 66 fibres

260

Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation

261

Microstructural modeling in f.c.c. crystalline materials in a unified dislocation-density framework

262

Microstructural modeling of adaptive nanocomposite coatings for durability and wear

263

Microstructural modeling of dynamic recrystallization using irregular cellular automata

264

Microstructural modeling of ferroelectric fracture Original Research Article

265

Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy

266

Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy

267

Microstructural modeling of solidification in A356 alloy

268

Microstructural modeling of thermal conductivity of high burn-up mixed oxide fuel

269

Microstructural modelling in metals processing

270

Microstructural modelling of aluminium alloys during thermomechanical processing

271

Microstructural modelling of aluminium alloys during thermomechanical processing

272

Microstructural modelling of dynamic recrystallisation using an extended cellular automaton approach

273

Microstructural modelling of electrical conductivity and mechanical properties of sintered ferrous materials

274

Microstructural modelling of equal channel angular pressing for producing ultrafine grained materials

275

Microstructural modelling of nuclear graphite using multi-phase models

276

Microstructural modelling of stress-dependent behaviour of clay

277

Microstructural modelling solution for complex Co based alloys and coatings

278

Microstructural modification and ductility enhancement of surfaces modified by FSP in aluminium alloys

279

Microstructural modification and hardness improvement of titanium-base surface-alloyed materials fabricated by high-energy electron beam irradiation

280

Microstructural modification and porosity evolution during carbonization of fuel element compact for HTGR

281

Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy

282

Microstructural modification due to reheating in multipass manual metal arc welds of 9Cr–1Mo steel

283

Microstructural modification of chalcogenide glasses by femtosecond laser

284

Microstructural modification of LiNbO3 crystals induced by femtosecond laser irradiation

285

Microstructural modification of the anode/electrolyte interface of SOEC for hydrogen production

286

Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel

287

Microstructural modifications in -brass targets after small charge explosions

288

Microstructural modifications in Portland cement concrete due to forced ionic migration tests. Study by impedance spectroscopy

289

Microstructural modifications in α-brass targets after small charge explosions

290

Microstructural modifications induced by hydrogen absorption in Mg5Ga2 and Mg6Pd Original Research Article

291

Microstructural modifications induced by spray forming of Al–Cu alloys

292

Microstructural modifications induced by spray forming of Al–Cu alloys

293

Microstructural modifications induced by the entrapped glucose oxidase in cross-linked polyacrylamide microgels used as glucose sensors

294

Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties

295

Microstructural modifications of ferroelectric lead zirconate titanate ceramics due to bipolar electric fatigue

296

Microstructural modifications of Ni–Ti shape memory alloy thin films induced by electronic stopping of high-energy heavy ions

297

Microstructural modifications resulting from the dehydration of gypsum

298

Microstructural morphology effects on fracture resistance and crack tip strain distribution in Ti–6Al–4V alloy for orthopedic implants

299

Microstructural morphology of electrospark deposition layer of a high gamma prime superalloy

300

Microstructural musical linguistics: composersʹ pulses are liked most by the best musicians

301

Microstructural observation and tensile properties of ODS-304 austenitic steel

302

Microstructural observation of organic thin film in optical recording

303

Microstructural observation of organic thin film in optical recording

304

Microstructural observations and mechanisms of lamellar coarsening in iron meteorites

305

Microstructural observations in new matrix glass fibre reinforced cement

306

Microstructural observations of as-prepared and thermal cycled NiCoCrAlY bond coats

307

Microstructural observations of polycrystalline diamond: a contribution to the carbonado conundrum

308

Microstructural observations of shear zones in sensitive clay

309

Microstructural observations of spheroidization from a lamellar structure in iron meteorites

310

Microstructural Observations on Nissl Substances in the Cerebellar Cortex of Adult Wistar Rats following Quinine Administration

311

Microstructural optimization and extended durability studies of low-cost rough graphite–aluminium solar absorber surfaces

312

Microstructural optimization of alloys using a genetic algorithm

313

Microstructural optimization of alloys using a genetic algorithm

314

Microstructural optimization of functionally graded composites subjected to a thermal gradient via the coupled higher-order theory

315

Microstructural optimization of high-temperature SiC/SiC composites by NITE process

316

Microstructural optimization of mordenite membrane for pervaporation dehydration of acetic acid

317

Micro-structural optimization of supported γ-alumina membranes

318

Microstructural organization of polydimethylsiloxane soft segment polyurethanes derived from a single macrodiol

319

Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering

320

Microstructural origin of physical and mechanical properties of ultra high molecular weight polyethylene processed by high velocity compaction

321

Microstructural origin of the dielectric breakdown strength in alumina: A study by positron lifetime spectroscopy

322

Microstructural origins of radiation-induced changes in mechanical properties of 316 L and 304 L austenitic stainless steels irradiated with mixed spectra of high-energy protons and spallation neutrons

323

Microstructural parameters affecting creep induced load shedding in Ti-6242 by a size dependent crystal plasticity FE model

324

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

325

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

326

Microstructural parameters and flow stress in Al–0.13% Mg deformed by ECAE processing

327

Microstructural parameters and optical constants of CdS thin films synthesized with various bath temperature

328

Microstructural parameters controlling gas permeability and permselectivity in polyimide membranes

329

Microstructural parameters governing cleavage fracture behaviors in the ductile–brittle transition region in reactor pressure vessel steels

330

Microstructural parameters governing cleavage fracture behaviors in the ductile–brittle transition region in reactor pressure vessel steels

331

Microstructural parameters of dispersion strengthened Cu–Al2O3 materials

332

Microstructural Parameters of Hydroxypropylmethylcellulose Films Using X-ray Data

333

Microstructural path and temperature dependence of recrystallization in commercial aluminum Original Research Article

334

Microstructural pathways for the densification of slip cast alumina

335

Microstructural pattern formation in finite-deformation single-slip crystal plasticity under cyclic loading: Relaxation vs. gradient plasticity

336

Microstructural penetrometry of asteroid regolith analogues and Titan’s surface

337

Microstructural phenomena in low-firing ceramics

338

Microstructural pocesses: a special issue in honor of the career contributions of R.H. Vernon

339

Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel

340

Microstructural processes during subcritical crack growth in hard metals and cermets under cyclic loads

341

Microstructural processes during subcritical crack growth in hard metals and cermets under cyclic loads

342

Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy

343

Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy

344

Microstructural properties of (In,Ga)2Se3 precursor layers for efficient CIGS thin-film solar cells

345

Microstructural properties of amorphous carbon nitride films synthesised by dc magnetron sputtering

346

Microstructural properties of an electrochromic WO3 thin film

347

Microstructural properties of boehmite formed under hydrothermal conditions

348

Microstructural properties of boehmite formed under hydrothermal conditions

349

Microstructural properties of Co thin films grown on p-GaAs (1 0 0) Substrates

350

Microstructural properties of electrochemically prepared Ni–Fe–W powders

351

Microstructural properties of fat during the accelerated ripening of ultrafiltered-Feta cheese

352

Microstructural properties of Fe–oxide powders obtained by precipitation from FeCl3 solutions

353

Microstructural properties of Fe–oxide powders obtained by precipitation from FeCl3 solutions

354

Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate

355

Microstructural Properties of Heat-set Whey Protein Gels: Effect of pH

356

Microstructural properties of laser synthesized Si/C/N nanoparticles

357

Microstructural properties of plasma-enhanced chemical vapor deposited WNx films using WF6–H2–N2 precursor system

358

Microstructural properties of plasma-enhanced chemical vapor deposited WNx films using WF6–H2–N2 precursor system

359

Microstructural Properties of Semisolid Welded Joints for AISI D2 Tool Steel

360

Microstructural properties of SiC based hardfacing on low alloy steel

361

MICROSTRUCTURAL REARRANGEMENT OF SODIUM CHLORIDE CONDENSATION AEROSOL PARTICLES ON INTERACTION WITH WATER VAPOR

362

Microstructural refinement and deformation mode of Ti under cryogenic channel die compression

363

Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression

364

Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition Original Research Article

365

Microstructural refinement and strengthening of Nd-bearing TiAl alloys

366

Microstructural refinement and strengthening of Nd-bearing TiAl alloys

367

Microstructural refinement and tensile properties enhancement of Mg–3Al alloy using charcoal additions

368

Microstructural refinement and tensile properties enhancement of the Mg-9Al-1Zn alloy after hot extrusion

369

Microstructural refinement and wear property of Al–Si–Cu composite subjected to extrusion and high-pressure torsion

370

Microstructural refinement of an Fe–C alloy within the ferritic range via two different strain paths

371

Microstructural refinement of AZ91D die-cast alloy by intensive shearing

372

Microstructural refinement of boron-containing β-solidifying γ-titanium aluminide alloys through heat treatments in the β phase field

373

Microstructural refinement of cast p-type Bi2Te3–Sb2Te3 by equal channel angular extrusion Original Research Article

374

Microstructural refinement of CP-Ti by cryogenic channel-die compression involving mechanical twinning

375

Microstructural refinement of DC cast AZ80 Mg billets by low frequency electromagnetic vibration

376

Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding

377

Microstructural refinement of weld fusion zones in α–β titanium alloys using pulsed current welding

378

Microstructural refinement process of pure magnesium by electromagnetic vibrations

379

Microstructural refinement through inoculation of type 7020 Al–Zn–Mg alloy welds and its effect on hot cracking and tensile properties

380

Microstructural refinement using ball-milling and spark-plasma sintering of MgH2 based materials for hydrogen storage

381

Microstructural refinement using ball-milling and spark-plasma sintering of MgH2 based materials for hydrogen storage

382

Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel

383

Microstructural relationship with fracture toughness of undoped and rare earths (Y, La) doped Al2O3–ZrO2 ceramic composites

384

Micro-structural reliability design of brittle materials

385

Microstructural requirements for alumina-SiC nanocomposites

386

Microstructural requirements for alumina-SiC nanocomposites

387

Microstructural research on hot strips of low carbon steel produced by a compact strip production line under different thermal histories

388

Microstructural resistance of snow following first wetting

389

Microstructural response of an Al-modified Ni–Cr–Fe ternary alloy during thermal processing

390

Microstructural response of pure copper to cryogenic rolling Original Research Article

391

Microstructural response on the room temperature low cycle fatigue behaviour of two high strength duplex ferrite–martensite steels and a normalised ferrite–pearlite steel

392

Microstructural response to heat affected zone cracking of prewelding heat-treated Inconel 939 superalloy

393

Microstructural revolution of CIGS thin film using CuInGa ternary target during sputtering process

394

Microstructural scale strain localisation in nuclear graphite

395

Microstructural self-healing effect of hydrothermal crystallization on bonding strength and failure mechanism of hydroxyapatite coatings

396

Microstructural self-organization triggered by twin boundaries during dry sliding wear Original Research Article

397

Microstructural sensitivity of 316H austenitic stainless steel: Residual stress relaxation and grain boundary fracture

398

Microstructural simulation in spinodally-decomposed Cu–70 at.%Ni and Cu–46 at.%Ni–4 at.%Fe alloys

399

Microstructural Simulation of Asphalt Materials: Modeling and Experimental Studies

400

Microstructural size effects on mechanical properties of high purity nickel

401

Microstructural stability and creep behavior of a lamellar γ-TiAl based alloy with extremely fine lamellar spacing

402

Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91 + 2RE magnesium alloys

403

Microstructural stability and mechanical properties of a new nickel-based superalloy

404

Microstructural stability and mechanical properties of a newly developed Ni–Fe-base superalloy

405

Microstructural stability and room temperature mechanical properties of the Nextel 720 fibre

406

Microstructural stability and short-term creep properties of 12Cr–W–Mo–Co steel

407

Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni–P alloy Original Research Article

408

Microstructural stability controls the hydraulic conductivity of smectitic buffer clay

409

Microstructural stability during low temperature exposure of alloys within the Al–Li–Cu–Mg system

410

Microstructural stability in multi-alloy systems: Nanostructured two-phase, dual alloy multilayers Original Research Article

411

Microstructural stability of a cast Ti–45.2Al–2W–0.6Si–0.7B alloy at temperatures 973–1073 K

412

Microstructural stability of an HT-9 fuel assembly duct irradiated in FFTF

413

Microstructural stability of Cu processed by different routes of severe plastic deformation

414

Microstructural stability of Cu–Nb microcomposite wires fabricated by the bundling and drawing process

415

Microstructural stability of Cu–Nb microcomposite wires fabricated by the bundling and drawing process

416

Microstructural stability of fcc-γ+B2-β coatings on γ substrate in Ni–Cr–Al system — A phase field model study

417

Microstructural stability of modified 9Cr–1Mo steel during long term exposures at elevated temperatures

418

Microstructural stability of nanostructured Cu–Nb–W alloys during high-temperature annealing and irradiation Original Research Article

419

Microstructural stability of rapidly quenched AlFeMo alloys

420

Microstructural stability of rapidly quenched AlFeMo alloys

421

Microstructural stability of reduced activation ferritic/martensitic steels under high temperature and stress cycling

422

Microstructural stability of SiC and SiC/SiC composites under high temperature irradiation environment

423

Microstructural stability of Sn–1Ag–0.5Cu–xAl (x = 1, 1.5, and 2 wt.%) solder alloys and the effects of high-temperature aging on their mechanical properties

424

Microstructural stability of the intermetallic Ti–45Al–2W–0.5Si–0.5B in the 800–980 °C temperature range

425

Microstructural stability of γ-based TiAl intermetallics containing β phase

426

Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 steel

427

Microstructural stress relaxation mechanics in functionally different tendons

428

Microstructural studies and crystallographic orientation of different zones and δ-hydrides in resistance welded Zircaloy-4 sheets

429

Microstructural studies and electrical properties of Mg-doped SrTiO3 thin films Original Research Article

430

Microstructural studies and remnant life assessment of eleven years service exposed reformer tube

431

Microstructural studies and wear assessments of Ti/TiC surface composite coatings on commercial pure Ti produced by titanium cored wires and TIG process

432

Microstructural studies of 35 °C Copper Ni–Ti orthodontic wire and TEM confirmation of low-temperature martensite transformation

433

Microstructural studies of crystallization of a Zr-based bulk metallic glass Original Research Article

434

Microstructural studies of Fe-silicide films produced by metal vapor vacuum arc ion implantation of Fe into Si substrates

435

Microstructural studies of friction stir welds in 2024-T3 aluminum

436

Microstructural studies of friction stir welds in 2024-T3 aluminum

437

Microstructural studies of GaN grown on (0001) sapphire by MOVPE

438

Microstructural studies of GaN grown on (0001) sapphire by MOVPE

439

Micro-structural studies of GeSe2–Ga2Se3–MX (MX = CsI and PbI2) glasses using Raman spectra

440

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

441

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

442

Microstructural studies of in-situ formed MgB2 phases in a Mg alloy matrix composite

443

Microstructural studies of metal/ferrite composite thin films

444

Microstructural studies of nanocrystalline CeO2 produced by gas condensation

445

Microstructural studies of nanocrystalline α-alumina powder produced from Al13-cluster Original Research Article

446

Microstructural studies of PZT thick films on Cu foils Original Research Article

447

Microstructural studies of quenched partially-melted Y-123 materials and Y-123 with Y-211, PtO2 and CeO2 additions

448

Microstructural studies of quenched partially-melted Y-123 materials and Y-123 with Y-211, PtO2 and CeO2 additions

449

Microstructural studies of TiN coatings prepared by PVD and IBAD

450

MICROSTRUCTURAL STUDIES OF Ti-REFINED Al2014 ALLOY PREPARED BY SIMA PROCESS

451

Microstructural studies on BaCl2 doped poly(vinyl alcohol)

452

Microstructural studies on degradation of interface between LSM–YSZ cathode and YSZ electrolyte in SOFCs

453

Microstructural studies on EB-PVD deposited NiCrAlY, YSZ and lanthanum zirconate for thermal barrier applications

454

Microstructural studies on phase evolution sequence in rapidly solidified Zr3Al based binary and ternary alloys

455

Microstructural studies on phase evolution sequence in rapidly solidified Zr3Al based binary and ternary alloys

456

Microstructural studies on Pr–Fe–B–Cu magnets produced by upset forging of cast ingot

457

Microstructural studies on Pr–Fe–B–Cu magnets produced by upset forging of cast ingot

458

Microstructural studies on some ordered Ti-based alloys

459

Microstructural studies on the reoxidation behavior of Nb-doped SrTiO3 ceramics

460

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB2 particles

461

Microstructural study and electrochemical behavior of low alloy steel weldment

462

Microstructural study and wear behavior of ductile iron surface alloyed by Inconel 617

463

Microstructural study by XPS and GISAXS of surface layers formed via phase separation and percolation in polystyren/tetrabutyl titanate/alumina composite films

464

Microstructural study in heteroepitaxial YBa/sub 2/Cu/sub 3/O/sub 7//Nd/sub 2/CuO/sub 4/ multi-layers by using electron microscopy

465

Microstructural study of (Co–Ni–Fe) based alloys

466

Microstructural study of a natural slip zone: quantification and deformation history

467

Microstructural study of a titanium-based biocomposite produced by the powder metallurgy process with TiH2 and nanometric β-TCP powders

468

Microstructural study of adiabatic shear bands formed by high-speed impact in a tungsten heavy alloy penetrator

469

Microstructural study of adiabatic shear bands formed by high-speed impact in a tungsten heavy alloy penetrator

470

Microstructural study of aged ferrite powders for sensing layers

471

Microstructural Study of Al-Si-Mg Alloy Reinforced with Stainless Steel Wires Composite via Casting Technique

472

Microstructural Study of Aluminium Alloy A390 After Milling Process

473

Microstructural study of an age hardenable martensitic steel deformed by equal channel angular pressing

474

Microstructural study of annealed Cr/Si system using cross-sectional TEM combined with nano-analysis

475

Microstructural study of annealed gold–silicon thin films under nanoindentation

476

Microstructural study of aromatic polyamide membrane material

477

Microstructural study of asphaltene precipitated with methylene chloride and n-hexane☆

478

Microstructural study of BaTiO3/SrTiO3 superlattice

479

Microstructural study of carbonated cement-solidified synthetic heavy metal waste

480

Microstructural study of carbonized wood after cell wall sectioning

481

Microstructural study of CdS/opal composites Original Research Article

482

Microstructural study of CO2 laser machined heat affected zone of 2024 aluminum alloy

483

Microstructural study of Crofer 22 APU-glass interface for SOFC application

484

Microstructural study of cryogenically treated En 31 bearing steel

485

Microstructural study of different LDH morphologies obtained via different synthesis routes Original Research Article

486

Microstructural study of EC316LN and its welds irradiated in SINQ target-3

487

Microstructural study of equiatomic PtTi martensite and the discovery of a new long-period structure Original Research Article

488

Microstructural study of frozen batter-coated squid rings prepared by an innovative process without a pre-frying step

489

Microstructural study of gamma phase stability in U–9 wt.% Mo alloy

490

Micro-structural study of high-Mn TWIP steels using diffraction profile analysis

491

Microstructural study of high-temperature Cr–Ni–Al–Ti alloys supported by first-principles calculations

492

Microstructural study of hydride formation in Zr–1Nb alloy

493

Microstructural study of hydrogen desorption in 2NaBH4 + MgH2 reactive hydride composite

494

Microstructural study of irradiated isotopically tailored F82H steel

495

Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stones

496

Microstructural study of opaque glazes obtained from frits of the system: SiO2-Al2O3-B2O3-(P2O5)-CaO-K2O-TiO2

497

Microstructural study of pre-yielding and pre-yield cracking in TiAl-based alloys

498

Microstructural study of residual stress in chemically vapor deposited β-SiC

499

Microstructural study of silica-doped zirconia ceramics Original Research Article

500

MICROSTRUCTURAL STUDY OF SILICON NITRIDE WHISKERS PRODUCED BY NITRIDATION OF PLASMA-SPRAYED SILICON LAYERS

501

Microstructural study of strain localization in a compressed Mg–3Al–1Zn alloy

502

Microstructural study of strain localization in hot compressed Mg–3Al–1Zn alloy

503

Microstructural study of sulfate attack on ordinary and limestone Portland cements at ambient temperature

504

Microstructural study of surface melted and chromium surface alloyed ductile iron

505

Microstructural study of the aluminium/nickel aluminide interface formed in a hot-pressed in situ composite

506

Microstructural study of the CO2 absorption in SrxCa1−xFe0.5Co0.5O3−δ

507

Microstructural study of the initiation and formation of immersion tin coating on copper

508

Microstructural study of the initiation and formation of immersion tin coating on copper

509

Microstructural study of the initiation and formation of immersion tin coating on copper

510

Microstructural study of the LiBH4–MgH2 reactive hydride composite with and without Ti-isopropoxide additive Original Research Article

511

Microstructural study of titanium carbonitride produced by combustion synthesis

512

Microstructural study of transient liquid phase bonded DD98 and K465 superalloys at high temperature

513

Microstructural study of tungsten influence on Co–Cr alloys

514

Microstructural study of tungsten influence on Co–Cr alloys

515

Microstructural study of tungsten influence on Co–Cr alloys

516

Microstructural study of vapour grown carbon nanofibre/copper composites

517

Microstructural study of WWER reactor pressure vessel steels

518

Microstructural study on 90° basal-plane-faced tilt boundaries showing d-wave paring characteristics

519

Microstructural study on 90° basal-plane-faced tilt boundaries showing d-wave paring characteristics

520

Microstructural Study on Oxidation of Aluminized Coating on Inconel 625

521

Microstructural study on the inhibition of immersion tin coating formation by the substrate surface contamination

522

Microstructural tailoring and improvement of mechanical properties in CuZr-based bulk metallic glass composites Original Research Article

523

Microstructural thermal stability of CNT-reinforced composites processed by severe plastic deformation

524

Microstructural thermostability of high nitrogen austenitic stainless steel

525

Microstructural tomography of a superalloy using focused ion beam microscopy

526

Microstructural tomography of a superalloy using focused ion beam microscopy

527

Microstructural transformations and mechanical properties of cast NiAl bronze: Effects of fusion welding and friction stir processing

528

Microstructural transformations of TiO2, Al2O3+13TiO2 and Al2O3+40TiO2 at plasma spraying and laser engraving

529

Microstructural transformations of two representative slags at high temperatures and effects on the viscosity

530

Microstructural transitions in Al–Cu ribbons manufactured by planar flow casting

531

Microstructural transitions in Al–Cu ribbons manufactured by planar flow casting

532

Microstructural variation and dielectric properties of KTiNbO5 and K3Ti5NbO14 ceramics

533

Microstructural Variation in Quartzofeldspathic Mylonites: Example from Schirmacher Hills, East Antarctica

534

Microstructural variation of a cast Ti48Al2W0.5Si alloy during quenching and tempering

535

Microstructural variation of a cast Ti48Al2W0.5Si alloy during quenching and tempering

536

Microstructural Viscoplastic Continuum Model for Permanent Deformation in Asphalt Pavements

537

Microstructural weathering of sedimentary rocks by freeze–thaw cycles: Experimental study of state and transfer parameters

538

Microstructural white matter correlates of emotion recognition impairment in Amyotrophic Lateral Sclerosis

539

Microstructural white matter damage at orbitofrontal areas in borderline personality disorder

540

Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

541

Microstructural, compositional and residual stress evaluation of CO2 laser welded superaustenitic AISI 904L stainless steel

542

Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation

543

Microstructural, crystal structure and electrical characteristics of shock-consolidated Ga2O3 doped ZnO bulk

544

Microstructural, dielectric and ferroelectric properties of calcium-modified lead titanate thin films derived by chemical processes

545

Microstructural, dielectric and spectroscopic properties of Li2O–Nb2O5–ZrO2–SiO2 glass system crystallized with V2O5 Original Research Article

546

Microstructural, electrical and magnetic properties of multiferroic CoFe2O4/0.68Pb(Mg1/3Nb2/3)O3–0.32PbTiO3 nanocomposite thin films

547

Microstructural, electrical and optical properties of indium tin oxide (ITO) nanoparticles synthesized by co-precipitation method

548

Microstructural, electrical and optical properties of ZnO:Mo thin films with various thickness by spray pyrolysis

549

Microstructural, electrical and optical properties of ZnO:Mo thin films with various thickness by spray pyrolysis

550

Microstructural, electrical and reliability aspects of chromium doped Ni–Mn–Fe–O NTC thermistor materials

551

Micro-structural, electron-spectroscopic and field-emission studies of carbon nitride nanotubes grown from cage-like and linear carbon sources Original Research Article

552

Microstructural, magnetic and mechanical property changes in an AISI 444 stainless steel aged in the 560 °C to 800 °C range

553

Microstructural, magnetotransport, and electronic subband studies of InAsxP1−x/InP modulation-doped strained single quantum wells Original Research Article

554

Microstructural, mechanical and fractographical study of titanium-CP and Ti–6Al–4V similar brazing with Ti-based filler

555

Microstructural, mechanical and oxidation features of NiCoCrAlY coating produced by plasma activated EB-PVD

556

Microstructural, mechanical and thermal characterisation of sol–gel-derived aluminium titanate–mullite ceramic composites Original Research Article

557

Microstructural, mechanical and tribological analysis of nanocomposite Ti–C–N coatings deposited by industrial-scale DC magnetron sputtering

558

Microstructural, mechanical and tribological characterisation of roll materials for the finishing stands of the hot strip mill for steel rolling

559

Microstructural, mechanical and tribological properties of tungsten-gradually doped diamond-like carbon films with functionally graded interlayers

560

Microstructural, mechanical and wear behavior of A390/graphite and A390/Al2O3 surface composites fabricated using FSP

561

Microstructural, mechanical and wear properties of Cr–Al–B–N coatings deposited by DC reactive magnetron co-sputtering

562

Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys

563

Microstructural, mechanical, and corrosion characterization of nitrogen-implanted plastic injection mould steel

564

Microstructural, mechanical, and corrosion characterization of plasma-nitrided plastic injection mould steel

565

Microstructural, mechanical, electrical and thermal characterization of arc-melted Ni–Si and Co–Si alloys

566

Microstructural, microchemical, and mechanical changes associated with the clinical reuse of two nickel–titanium endodontic instruments

567

Microstructural, optical and electrical investigations of Sb-SnO2 thin films deposited by spray pyrolysis

568

Microstructural, optical and electrical studies on sol gel derived ZnO and ZnO:Al films

569

Microstructural, optical and electrical transport properties of WO3 nanoparticles coated polypyrrole hybrid nanocomposites

570

Microstructural, optical and electrical transport properties of WO3 nanoparticles coated polypyrrole hybrid nanocomposites

571

Microstructural, optical and magnetic properties of cobalt-doped zinc oxysulfide thin films

572

Microstructural, optical and quantum confinement effect study of mechanically synthesized ZnTe quantum dots Original Research Article

573

Microstructural, optical and spectroscopic studies of laser ablated nanostructured tantalum oxide thin films

574

Microstructural, optical and thermal characterization of synthetic clay as a passive cooling medium

575

Microstructural, optical, and electrical properties of Ni–Al co-doped ZnO films prepared by DC magnetron sputtering

576

Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation

577

Microstructural, Raman and XPS properties of single-crystalline Bi3.15Nd0.85Ti3O12 nanorods

578

Microstructural, structural and dielectric properties of Er3+-modified BaTi0.85Zr0.15O3 ceramics

579

Microstructural, structural and electrical properties of La3+-modified Bi4Ti3O12 ferroelectric ceramics

580

Microstructural, structural, dielectric and piezoelectric properties of potassium sodium niobate thick films

581

Microstructural, thermal and mechanical properties of HVOF sprayed Ni–Al-based bond coatings on stainless steel substrate

582

Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles

583

Microstructural, tribological and corrosion aspects of thermally sprayed Ti–Cr–Si coatings

584

Microstructural-deformation record of an orogen-parallel extension in the Vepor Unit, West Carpathians

585

Microstructurally induced computational and material instabilities

586

Microstructurally induced fracture nucleation and propagation in martensitic steels

587

Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al

588

Microstructurally short fatigue crack initiation and growth in Ti-6.8Mo-4.5Fe-1.5Al

589

Microstructure Mechanical Properties Evaluation of Al6082 /AlSi10Mg Composite for Light Weight Structural Applications

590

Microstructure – cyclic deformation property relationships of biodegradable di-crystalline triblock copolymers

591

Microstructure & rheology of mixed colloidal dispersions: Influence of pH-induced droplet aggregation on starch granule–fat droplet mixtures Original Research Article

592

Microstructure affects the rate of chemical, physical and color changes during storage of dried apple discs Original Research Article

593

Microstructure after superplastic creep of alumina–zirconia composites prepared by powder alcoxide mixtures

594

Microstructure alterations at the surface of a heavily corrugated rail with strong ripple formation

595

Microstructure alterations in beef intramuscular connective tissue caused by hydrodynamic pressure processing

596

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA = 0.15 C-2.5 Cr-0.7 Mo-0.3 V

597

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA = 0.15 C-2.5 Cr-0.7 Mo-0.3 V

598

Microstructure alterations in the base material, heat affected zone and weld metal of a 440-VVER-reactor pressure vessel caused by high fluence irradiation during long term operation; material: 15 Ch2MFA ≈0.15 C–2.5 Cr–0.7 Mo–0.3 V Original Research Artic

599

Microstructure analyses and thermoelectric properties of image

600

Microstructure analyses of autoclaved ground dune sand–Portland cement paste

601

Microstructure analyses of CrN coating synthesized by a hybrid PVD and metal-plasma ion implantation process

602

Microstructure Analyses of Metal-Filled Carbon Nanotubes Synthesized by Microwave Plasma-Enhanced Chemical Vapor Deposition

603

Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators

604

Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators

605

Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys

606

Microstructure analysis and mechanical properties of a new class of Al2O3–WC nanocomposites fabricated by spark plasma sintering

607

Microstructure analysis and thermal properties of l-lactide/ɛ-caprolactone copolymers obtained with magnesium octoate

608

Microstructure analysis of 304L austenitic stainless steel by QPQ complex salt bath treatment

609

Microstructure Analysis of 4-Step Three-Dimensional Braided Composite

610

Microstructure analysis of a Cr–Ni multilayer pulse-electroplated in a bath containing trivalent chromium and divalent nickel ions

611

Microstructure analysis of aluminum extrusion: Prediction of microstructure on AA6060 alloy

612

Microstructure analysis of a-SiC:H thin films grown by high-growth-rate PECVD

613

Microstructure analysis of AZ31 magnesium alloy welds using phase-field models Original Research Article

614

Microstructure Analysis of Bio Engineered Concrete under the Concept of Self-Healing

615

Microstructure analysis of Cf/SiC–ZrC composites in both fabrication and plasma wind tunnel testing processes

616

Microstructure analysis of Co–Cu alloys undercooled prior to solidification

617

Microstructure analysis of Co–Cu alloys undercooled prior to solidification

618

Microstructure analysis of magnesium alloy melted by laser irradiation

619

Microstructure analysis of Ni laterite agglomerates for enhanced heap leaching

620

Microstructure analysis of nodular iron 400-12 after laser surface melt hardening

621

Microstructure analysis of plasma nitrided cast/forged CoCrMo alloys

622

Microstructure analysis of reconstructed porous media

623

Microstructure analysis of the ferromagnetic Ag–Ni system synthesized by pulsed electrodeposition

624

Microstructure analysis of the interface situation and adhesion of thermally formed nickel silicide for plated nickel–copper contacts on silicon solar cells

625

Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM)

626

Microstructure analysis of the martensitic stainless steel surface fine-cut by the wire electrode discharge machining (WEDM)

627

Microstructure analysis of zirconium carbide layer on pyrocarbon-coated particles prepared by zirconium chloride vapor method

628

Microstructure analysis on pre-treated apple slices and its effect on water release during air drying Original Research Article

629

Microstructure analysis using temperature-induced contrast variation in small-angle scattering

630

Microstructure Analysis, Physical and Thermal Properties of Al2O3- Al2TiO5 Functionally Graded Ceramics for the Application of Car Brake Rot

631

Microstructure and 3D microtomographic characterization of porosity of MAO surface layers formed on aluminium and 2214-T6 alloy

632

Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr–Ti Original Research Article

633

Microstructure and ablation behavior of hafnium carbide coating for carbon/carbon composites

634

Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process Original Research Article

635

Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method

636

Microstructure and ablation mechanism of C/C–SiC composites

637

Microstructure and ablation mechanism of graphite/SiC composites under oxy-acetylene flame

638

Microstructure and ablation performances of dual-matrix carbon/carbon composites Original Research Article

639

Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites Original Research Article

640

Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering

641

Microstructure and Abrasive Wear Behavior of Medium Carbon Low Alloy Martensitic Abrasion Resistant Steel Original Research Article

642

Microstructure and abrasive wear behaviour of FeCr–TiC coatings deposited by HVOF spraying of SHS powders

643

Microstructure and abrasive wear characteristics of in situ vanadium carbide particulate-reinforced iron matrix composites

644

Microstructure and abrasive wear in silicon nitride ceramics

645

Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating

646

Microstructure and activation characteristics of Mg–Ni alloy modified by multi-walled carbon nanotubes

647

Microstructure and adherence of cobalt containing and cobalt free enamels to low carbon steel

648

Microstructure and adhesion of 100Cr6 steel coatings thermally sprayed on a 35CrMo4 steel substrate

649

Microstructure and adhesion of Cr3C2–NiCr vacuum plasma sprayed coatings

650

Microstructure and adhesion strength of Sn–9Zn–xAg lead-free solders wetted on Cu substrate

651

Microstructure and age characterization of Cu–15Ni–8Sn alloy coatings by laser cladding

652

Microstructure and aggregation behavior of methylcelluloses prepared in NaOH/urea aqueous solutions

653

Microstructure and aggregation behavior of methylcelluloses prepared in NaOH/urea aqueous solutions

654

Microstructure and anisotropic mechanical properties of graphene nanoplatelet toughened biphasic calcium phosphate composite

655

Microstructure and anisotropic swelling behaviour of compacted bentonite/sand mixture

656

Microstructure and anti-adhesion properties of PES/TAP/Ag hybrid ultrafiltration membrane Original Research Article

657

Microstructure and antibacterial properties of microwave plasma nitrided layers on biomedical stainless steels

658

Microstructure and antibacterial property of in situ TiO2 nanotube layers/titanium biocomposites

659

Microstructure and antibacterial property of in situ TiO2 nanotube layers/titanium biocomposites

660

Microstructure and anti-oxidation behavior of laser clad Ni–20Cr coating on molybdenum surface

661

Microstructure and anti-oxidation properties of multi-composition ceramic coatings for carbon/carbon composites

662

Microstructure and anti-oxidation property of CrSi2–SiC coating for carbon/carbon composites

663

Microstructure and anti-oxidation property of mullite oxidation protective coating prepared by hydrothermal electrophoretic deposition for SiC–C/C composites

664

Microstructure and apatite-forming ability of the MAO-treated porous titanium

665

Microstructure and association property of hydrophobically modified polyacrylamide of a new family

666

Microstructure and bactericidal ability of photocatalytic TiO2 thin films prepared by rf helicon magnetron sputtering

667

Microstructure and barrier properties of PHBV/organoclays bionanocomposites

668

Microstructure and bending strength of 3Y-TZP ceramics by liquid-phase sintering with CAS addition

669

Microstructure and beta grain growth behavior of Ti–Mo alloys solution treated

670

Microstructure and bioaccessibility of different carotenoid species as affected by high pressure homogenisation: A case study on differently coloured tomatoes

671

Microstructure and bioactivity of Ca, P and Sr doped TiO2 coating formed on porous titanium by micro-arc oxidation

672

Microstructure and biocompatibility investigation of biomaterial alumina after 30 keV and 60 keV nitrogen ion implantation

673

Microstructure and bond strength of diffusion-bonded nickel aluminide–titanium joints

674

Microstructure and bond strength of HA(+ ZrO2 + Y2O3)/Ti6Al4V composite coatings fabricated by RF magnetron sputtering

675

Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate

676

Microstructure and bonding mechanism of Al/Ti bonded joint using Al–10Si–1Mg filler metal

677

Microstructure and bonding properties of diffusion–bonded composite comprising an Fe–Al alloy and carbon steel

678

Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer

679

Microstructure and bonding strength of WC reinforced Ni-base alloy brazed composite coating

680

Microstructure and boundary phases of Lu–Al-doped silicon nitride by pressureless sintering

681

Microstructure and catalytic activity of Li0.15Ni0.25Cu0.3Zn0.3O2−δ-Ce0.8Sm0.2O1.9-carbonate nanocomposite materials functioning as single component fuel cell

682

Microstructure and cathodic performance of La0.9Sr0.1MnO3 electrodes according to particle size of starting powder

683

Microstructure and cavitation erosion behavior of FeNiCrBSiNbW coating prepared by twin wires arc spraying process

684

Microstructure and cavitation erosion characteristics of Al–Si alloy coating prepared by electrospark deposition

685

Microstructure and cavitation–silt erosion behavior of high-velocity oxygen–fuel (HVOF) sprayed Cr3C2–NiCr coating

686

Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method

687

Microstructure and characteristics of interpenetrating β-TCP/Mg–Zn–Mn composite fabricated by suction casting

688

Microstructure and Characterization of a Highly Selective Catalyst for the Isomerization of Alkanes: A Molybdenum Oxycarbide

689

Microstructure and characterization of Al-doped ZnO films prepared by RF power sputtering on Al and ZnO targets

690

Microstructure and characterization of aluminum oxide thin films prepared by reactive RF magnetron sputtering on copper

691

Microstructure and characterization of La2O3 and CeO2 doped diamond-like carbon nanofilms

692

Microstructure and characterization of Ni-Co/Al2O3 composite coatings by pulse reversal electrodeposit

693

Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304L

694

Microstructure and Charpy impact properties of 12–14Cr oxide dispersion-strengthened ferritic steels

695

Microstructure and Charpy impact properties of ferrite–martensite dual phase API X70 linepipe steel

696

Microstructure and chemical analysis of PAN-based activated carbon fibers prepared by different activation methods

697

Microstructure and chemical composition of phases in Ti–48Al–2Cr–2Nb intermetallic alloy

698

Microstructure and chemical composition of primary teeth in children with Down syndrome and cerebral palsy

699

Microstructure and chemical composition of Thracian medallions with enamel in millefiori technique found in Bulgaria

700

Microstructure and chemical degradation of adobe and clay bricks

701

Microstructure and Chemical States of Hydroxyapatite/silk Fibroin Nanocomposites Synthesized via A Wet-mechanochemical Route

702

Microstructure and chemistry of Al–V–Fe–Si nanoquasicrystalline alloys

703

Microstructure and chemistry of Al–V–Fe–Si nanoquasicrystalline alloys

704

Microstructure and chemistry of the SAC/ENIG interconnections

705

Microstructure and cleanability of uncoated and fluoropolymer, zirconia and titania coated ceramic glazed surfaces

706

Microstructure and CO gas sensing property of Au/SnO2 core–shell structure nanoparticles synthesized by precipitation method and microwave-assisted hydrothermal synthesis method

707

Microstructure and coercivity mechanism of highly textured Nd-Fe-B films

708

Microstructure and coercivity variation in melt-spun Sm–Co–Fe–Zr ribbons

709

Microstructure and color of starch–gum films: Effect of gum deacetylation and additives. Part 2

710

Microstructure and composition analysis in plasma sprayed coatings of Al2O3/ZrSiO4 mixtures

711

Microstructure and composition analysis of nanostructured materials using HREM and FEG-TEM

712

Microstructure and composition of cast Ti–47Al–2Cr–2Nb alloys produced by yttria crucibles

713

Microstructure and composition of hybrid Pd-Nafion membranes

714

Microstructure and composition of pulse plated Re–Ni alloys on a rotating cylinder electrode

715

Microstructure and composition of pulse-plated metals and alloys

716

Microstructure and composition of TiC/a-C:H nanocomposite thin films deposited by a hybrid IPVD/PECVD process

717

Microstructure and composition of titanium nitride formed by ion beam enhanced nitrogen sorption of evaporated titanium under argon ion irradiation

718

Microstructure and composition of titanium nitride formed by ion beam enhanced nitrogen sorption of evaporated titanium under argon ion irradiation

719

Microstructure and compositional assignments of acrylamide/vinylidene chloride copolymers using one and two dimensional nuclear magnetic resonance spectroscopy

720

Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling

721

Microstructure and compression behaviour in the semisolid state of short-fibre-reinforced A356 aluminium alloys

722

Microstructure and compression behaviour in the semisolid state of short-fibre-reinforced A356 aluminium alloys

723

Microstructure and compressive behavior of Al-base amorphous/nanocrystalline alloys fabricated by powder forging

724

Microstructure and compressive properties of AlCrFeCoNi high entropy alloy

725

Microstructure and compressive properties of in situ synthesized Ti–Si alloy composites reinforced with La2O3 particles

726

Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100−x high-entropy alloys

727

Microstructure and compressive properties of carbon microballoons

728

Microstructure and continuous cooling transformation thermograms of spray formed GCr15 steel

729

Microstructure and continuous cooling transformation thermograms of spray formed GCr15 steel

730

Microstructure and corrosion behavior of AISI 316L duplex treated by means of ion nitriding and plasma based ion implantation and deposition

731

Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy

732

Microstructure and corrosion behavior of AZ31 alloys prepared by dual directional extrusion

733

Microstructure and corrosion behavior of cast Fe–B alloys dipped into liquid zinc bath

734

Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application

735

Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings

736

Microstructure and corrosion behavior of laser surface-melted high-speed steels

737

Microstructure and corrosion behavior of Mg–Zn–Ag alloys

738

Microstructure and corrosion behavior of micro-arc oxidation coating on 6061 aluminum alloy pre-treated by high-temperature oxidation

739

Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel

740

Microstructure and corrosion behavior of plasma electrolytic oxidation coated magnesium alloy pre-treated by laser surface melting

741

Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting

742

Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steels

743

Microstructure and corrosion behaviour in biological environments of the new forged low-Ni Co–Cr–Mo alloys

744

Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel

745

Microstructure and corrosion behaviour of gas tungsten arc welds of maraging steel

746

Microstructure and corrosion characteristics of Zr–1.5Nb–0.4Sn–0.2Fe–0.1Cr alloy with a β-annealing

747

Microstructure and corrosion performance of laser-annealed electroless Ni–W–P coatings

748

Microstructure and corrosion properties of diode laser melted friction stir weld of aluminum alloy 2024 T351

749

Microstructure and corrosion properties of laser surface processed aluminium alloys: a review

750

Microstructure and corrosion properties of laser surface processed aluminium alloys: a review

751

Microstructure and corrosion properties of plasma-sprayed NiCr–Cr3C2 coatings comparison with different post treatment

752

Microstructure and corrosion properties of thick WC composite coating formed by plasma cladding

753

Microstructure and corrosion properties of ultrafine-grained interstitial free steel

754

Microstructure and corrosion resistance behavior of ceramic coatings on biomedical NiTi alloy prepared by micro-arc oxidation

755

Microstructure and corrosion resistance of a chromium-free multi-elements complex coating on AZ91D magnesium alloy

756

Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidation

757

Microstructure and corrosion resistance of enamel coatings applied to smooth reinforcing steel

758

Microstructure and corrosion resistance of induction melted Fe-based alloy coating

759

Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al–Si powder

760

Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy

761

Microstructure and corrosion resistance of pure titanium surface modified by double-glow plasma surface alloying

762

Microstructure and corrosion resistance of simultaneous Al–Fe coating on copper by pack cementation

763

Microstructure and corrosion resistance of sintered NdFeB magnet modified by intergranular additions of MgO and ZnO

764

Microstructure and corrosion resistance of the layers formed on the surface of precipitation hardenable plastic mold steel by plasma-nitriding

765

Microstructure and creep behavior of an Y-α-β sialon composite

766

Microstructure and creep behavior of directionally solidified TiAl-base alloys

767

Microstructure and creep behavior of DMS4-type nickel based superalloy single crystals with orientations near 〈0 0 1〉 and 〈0 1 1〉

768

Microstructure and creep behavior of FGH95 nickel-base superalloy

769

Microstructure and creep behavior of the extruded Mg–4Y–4Sm–0.5Zr alloy

770

Microstructure and creep behavior of the rare-earth doped Mg–6Zn–3Cu cast alloy

771

Microstructure and creep behaviors of a high Nb-TiAl intermetallic compound based alloy

772

Microstructure and creep behaviour of magnesium hybrid composites

773

Microstructure and creep behaviour of Mg-12Gd-3Y-1Zn-0.4Zr alloy

774

Microstructure and creep characteristics of dissimilar T91/TP316H martensitic/austenitic welded joint with Ni-based weld metal

775

Microstructure and creep characteristics of Zn–3Cu–xAl ultra high-temperature lead-free solders

776

Microstructure and creep deformation of a near beta titanium alloy ‘β-CEZ’

777

Microstructure and creep deformation of a near beta titanium alloy ‘β-CEZ’

778

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

779

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

780

Microstructure and creep properties of a cast intermetallic Ti–46Al–2W–0.5Si alloy for gas turbine applications

781

Microstructure and creep strength of fully-lamellar TiAl alloys containing beta-phase

782

Microstructure and creep strength of fully-lamellar TiAl alloys containing beta-phase

783

Microstructure and creep-recovery characteristics of achu (a taro based paste) made from freeze dried taro chips as affected by moisture content and variety Original Research Article

784

Microstructure and crystal structure of an equimolar Mg–Ti alloy processed by Simoloyer high-energy ball mill

785

Microstructure and crystallographic orientation relationship in directionally solidified Mg–Mg17Al12-eutectic

786

Microstructure and crystallographic orientation relationship in directionally solidified Mg–Mg17Al12-eutectic

787

Microstructure and crystallographic preferred orientation of polycrystalline microgarnet aggregates developed during progressive creep, recovery, and grain boundary sliding

788

Microstructure and Crystallographic Texture Characterization of Friction Stir Welded Thin AA2024 Aluminum Alloy

789

Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformation and annealing

790

Microstructure and crystallographic texture of an ultrafine grained C–Mn steel and their evolution during warm deformation and annealing Original Research Article

791

Microstructure and crystallographic texture of the chitin–protein network in the biological composite material of the exoskeleton of the lobster Homarus americanus

792

Microstructure and crystallography of borides and secondary precipitation in 18 wt.% Cr–4 wt.% Ni–1 wt.% Mo–3.5 wt.% B–0.27 wt.% C steel Original Research Article

793

Microstructure and crystallography of massive cementite layers on ferrite substrates Original Research Article

794

Microstructure and current–voltage characteristics of ZnO–V2O5–MnO2 varistor system

795

Microstructure and cyclic lifetime of Gd and Dy-containing EB-PVD TBCs deposited as single and double-layer on various bond coats

796

Microstructure and cyclic oxidation behavior of hot dip aluminized coating on Ni-base superalloy Inconel 718

797

Microstructure and cycling behavior of LiAl0.1Mn1.9O4 cathode for lithium secondary batteries at 3 V

798

Microstructure and cytotoxicity evaluation of duplex-treated silver-containing antibacterial TiO2 coatings

799

Microstructure and damage initiation in duplex stainless steels

800

Microstructure and damage initiation in duplex stainless steels

801

Microstructure and damping behaviour of consolidated magnesium chips

802

Microstructure and DC electrical conductivity of spinel nickel ferrite sintered in air and nitrogen atmospheres

803

Microstructure and defect characterization at interfaces in TiN/CrN multilayer coatings

804

Microstructure and defects of welds during production of water and gas pipes

805

Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate

806

Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation

807

Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation

808

Microstructure and deformation in the spray deposited Zn–22% Al alloy

809

Microstructure and deformation mechanism of 0 0 0 1 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings

810

Microstructure and deformation mechanisms in nanocrystalline Ni–Fe. Part I. Microstructure Original Research Article

811

Microstructure and deformation mechanisms in nanocrystalline Ni–Fe. Part II. In situ testing during X-ray diffraction Original Research Article

812

Microstructure and deformation mode of a stainless steel rupture disc exposed to sodium–water reaction

813

Microstructure and deformation of two-phase γ-titanium aluminides

814

Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering

815

Microstructure and deposition mechanism of CVD amorphous boron carbide coatings deposited on SiC substrates at low temperature

816

Microstructure and deuterium content of tokamak T-10 carbon erosion products

817

Microstructure and deuterium permeation resistance of the oxide scale prepared by initial oxidation method on vacuum solar receiver

818

Microstructure and dielectric characteristics of tungsten bronze structured SBN70 ceramics: effect of Nb2O5 content

819

Microstructure and dielectric properties control of Ba4(Nd0.7Sm0.3)9.33Ti18O54 microwave ceramics

820

Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3 thin films grown on super smooth glazed-Al2O3 ceramics substrate

821

Microstructure and dielectric properties of amorphous BaSm2Ti4O12 thin films for MIM capacitor

822

Microstructure and dielectric properties of Ba0.6Sr0.4TiO3–MgAl2O4 composite ceramics

823

Microstructure and dielectric properties of barium–strontium titanate with a functionally graded structure

824

Microstructure and dielectric properties of BaTiO3 ceramic doped with yttrium, magnesium, gallium and silicon for AC capacitor application

825

Microstructure and dielectric properties of BaxSr1−xTiO3 ceramics

826

Microstructure and dielectric properties of compositionally-graded (Ba1−xSrx)TiO3 thin films

827

Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics

828

Microstructure and dielectric properties of La2O3 doped amorphous SiO2 films as gate dielectric material

829

Microstructure and dielectric properties of La2O3 films prepared by ion beam assistant electron-beam evaporation

830

Microstructure and dielectric properties of low temperature sintered ZnNb2O6 microwave ceramics

831

Microstructure and dielectric properties of Pb0.94La0.06Nb2O6 ceramics

832

Microstructure and dielectric properties of PLZST ceramics prepared by a modified coprecipitation

833

Microstructure and dielectric properties of PMN–PT ceramics prepared by the molten salts method Original Research Article

834

Microstructure and dielectric properties of strontium barium niobate ceramics synthesized by partial coprecipitation

835

Microstructure and dielectric properties of the Ti-rich BaO–TiO2 thin films for microwave devices

836

Microstructure and dielectric properties of Zn3Nb2O8 ceramics prepared by a two-stage sintering method

837

Microstructure and dielectric response of (Ba,Sr)TiO3 filler-dispersed resin composites

838

Microstructure and discharge properties of Mg–Zr–O protective films in plasma display panel

839

Microstructure and dislocation analysis after creep deformation of die-cast Mg–Al–Sr (AJ) alloy

840

Microstructure and dispersion of Cu-TiCX master alloys into molten Cu and the relation to contact angle data

841

Microstructure and dry sliding wear behavior of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion

842

Microstructure and dry sliding wear behavior of Fe2TiSi /γ-Fe/Ti5Si3 composite coating fabricated by plasma transferred arc cladding process

843

Microstructure and dry sliding wear behavior of hot-extruded AlSiCuPb bearing alloys

844

Microstructure and dry sliding wear behavior of laser clad Ni-based alloy coating with the addition of SiC

845

Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding

846

Microstructure and dry sliding wear resistance evaluation of plasma nitrided austenitic stainless steel type AISI 316LN against different sliders

847

Microstructure and dry sliding wear resistance of a Cr13Ni5Si2 ternary metal silicide alloy Original Research Article

848

Microstructure and dry sliding wear resistance of CoTi intermetallic alloy

849

Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti–Ni–Si intermetallic composite coating

850

Microstructure and dry-sliding wear properties of TiC-reinforced composite coating prepared by plasma-transferred arc weld-surfacing process

851

Microstructure and dry-sliding wear resistance of laser clad tungsten reinforced W5Si3/W2Ni3Si intermetallic coatings

852

Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/g-Fe ceramal composite coating

853

Microstructure and ductile–brittle transition of as-cast Zr-based bulk glass alloys under compressive testing

854

Microstructure and ductile–brittle transition of as-cast Zr-based bulk glass alloys under compressive testing

855

Microstructure and durability of mortars modified with medium active blast furnace slag

856

Microstructure and dynamic tensile behavior of DP600 dual phase steel joint by laser welding

857

Microstructure and elastic modulus of mixed gels of gelatin + oxidized starch: Effect of pH

858

Microstructure and elastic modulus of phase-separated gelatin–starch hydrogels containing dispersed oil droplets

859

Microstructure and elastic properties of atomic layer deposited TiO2 anatase thin films Original Research Article

860

Microstructure and elastic properties of individual components of C/C composites Original Research Article

861

Microstructure and electric properties of lead-free 0.8Bi1/2Na1/2TiO3–0.2Bi1/2K1/2TiO3 ceramics

862

Microstructure and electric properties of strontium niobate ceramics

863

Microstructure and electrical characteristics of Cr–Si–Ni films deposited on glass and Si (1 0 0) substrates by RF magnetron sputtering

864

Microstructure and electrical characteristics of ZnO–B2O3–PbO–V2O5–MnO2 ceramics prepared from ZnO nanopowders

865

Microstructure and electrical characterization based on AFM of very high-doped polysilicon grains

866

Microstructure and electrical characterization of SixC1 − x/Al2O3 composite coatings for nuclear fusion applications

867

Microstructure and electrical conductivity of high volume Al2O3-reinforced copper matrix composites produced by plasma spray

868

Microstructure and electrical conductivity of LaNi0.6Fe0.4O3 prepared by combustion synthesis routes

869

Microstructure and electrical conductivity of Mo/TiN composite powder for alkali metal thermal to electric converter electrodes

870

Microstructure and electrical conductivity of nanocrystalline nickel- and nickel oxide/gadolinia-doped ceria thin films Original Research Article

871

Microstructure and electrical conductivity of Ni/YSZ and NiO/YSZ composites for high-temperature electrolysis prepared by mechanical alloying

872

Microstructure and electrical conductivity of NiO–YSZ nano-powder synthesized by aerosol flame deposition

873

Microstructure and electrical performance of eco-friendly thick film resistor compositions fired at different firing conditions

874

Microstructure and electrical properties in W/Nb co-doped Aurivillius phase Bi4Ti3O12 piezoelectric ceramics

875

Microstructure and electrical properties of (Ba0.85Ca0.15)1−xLix(Ti0.90Zr0.10)1−xNbxO3 ceramics with a low dielectric loss and a low sintering temperature

876

Microstructure and electrical properties of (Ba0.98Ca0.02)(Ti0.94Sn0.06)O3-modified Bi0.51Na0.50TiO3 lead-free ceramics

877

Microstructure and electrical properties of (Na0.5K0.5)1−2xMgxNbO3–Bi0.5Na0.5TiO3 lead-free piezoelectric ceramics

878

Microstructure and electrical properties of (Pb0.87Ba0.1La0.02)(Zr0.68Sn0.24Ti0.08)O3 anti-ferroelectric ceramics fabricated by the hot-press sintering method

879

Microstructure and electrical properties of (Zr, Sn)TiO4 thin film deposited on Si(1 0 0) using a sol–gel process

880

Microstructure and electrical properties of annealed tunneling magnetoresistive junctions with plasma oxidized insulation layer

881

Microstructure and electrical properties of antimony-doped tin oxide thin film deposited by sol–gel process

882

Microstructure and electrical properties of Ba0.5Sr0.5TiO3 thin films prepared on copper foils with La2O3 buffer layers

883

Microstructure and electrical properties of Ba1 − xSrxTiO3 thin films prepared by rf magnetron sputtering

884

Microstructure and electrical properties of BaTiO3/Cu ceramic composite sintered in nitrogen atmosphere

885

Microstructure and electrical properties of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–LiNbO3 lead-free piezoelectric ceramics Original Research Article

886

Microstructure and electrical properties of Bi2O3 excess Bi3.25La0.75Ti3O12 ferroelectric ceramics

887

Microstructure and electrical properties of Dy2O3-doped ZnO–Bi2O3 based varistor ceramics

888

Microstructure and Electrical Properties of Er2O3-Doped ZnO-Based Varistor Ceramics Prepared by High-Energy Ball Milling

889

Microstructure and electrical properties of iron oxide thin films deposited by spray pyrolysis

890

Microstructure and electrical properties of La2O3-doped Bi0.5(Na0.68K0.22Li0.1)0.5TiO3 lead-free piezoelectric ceramics

891

Microstructure and electrical properties of lead free potassium sodium niobate piezoceramics with nano ZnO additive

892

Microstructure and electrical properties of magnetic tunneling junction: NiFe/Co/Ta/Al-oxide/Co

893

Microstructure and electrical properties of magnetic tunneling junctions: Ta/NiFe/IrMn/M/Al-oxide/M/NiFe (M=Co, NiFe, CoFe)

894

Microstructure and electrical properties of Mn/Y codoped Ba0.67Sr0.33TiO3 ceramics

895

Microstructure and electrical properties of Mn-doped barium strontium titanate thin films prepared on copper foils

896

Microstructure and electrical properties of Na0.5Bi0.5(Ti0.98Zr0.02)O3 thin film deposited on indium tin oxide/glass substrate

897

Microstructure and electrical properties of Nb2O5 doped titanium dioxide

898

Microstructure and electrical properties of Ni1.0Mn2−xZrxO4 (0≤x≤1.0) negative temperature coefficient thermistors

899

Microstructure and electrical properties of niobium doped Bi4Ti3O12 layer-structured piezoelectric ceramics

900

Microstructure and electrical properties of PbZr Ti O 0.48 0.52 3 ferroelectric films on different Pt bottom electrodes

901

Microstructure and electrical properties of porous (Ba,Sr)TiO3 ceramics

902

Microstructure and electrical properties of porous PZT ceramics derived from different pore-forming agents Original Research Article

903

Microstructure and electrical properties of porous Y1−xCaxFeO3 cathode materials by gelcasting process

904

Microstructure and electrical properties of Pr6O11–Co3O4–MnCO3–Y2O3-doped ZnO varistors

905

Microstructure and electrical properties of rare earth doped ZnO-based varistor ceramics

906

Microstructure and electrical properties of relaxor (1 − x)[(K0.5Na0.5)0.95Li0.05](Nb0.95Sb0.05)O3–xBaTiO3 piezoelectric ceramics

907

Microstructure and electrical properties of Sc2O3-doped ZnO–Bi2O3-based varistor ceramics

908

Microstructure and electrical properties of Si3N4–TiN composites sintered by hot pressing and spark plasma sintering

909

Microstructure and electrical properties of Sm2O3 doped Bi2O3-based ZnO varistor ceramics

910

Microstructure and electrical properties of Tb-doped zinc oxide-based ceramics

911

Microstructure and electrical properties of the composites based on SrTi0.5Fe0.5O3 − δ and Ce0.8(Sm0.8Sr0.2)0.2O2 − δ

912

Microstructure and electrical properties of the conductive Pt–LaNiO3 composite films deposited with co-sputtering

913

Microstructure and electrical properties of thin films of ReSi1.75 produced by co-sputtering

914

Microstructure and electrical properties of Ti–Si–C–Ag nanocomposite thin films

915

Microstructure and electrical properties of vanadium-doped zinc oxide-based non-ohmic resistors

916

Microstructure and electrical properties of Y2O3-doped ZnO–Pr6O11-based varistor ceramics

917

Microstructure and electrical properties of zirconia and composite nanostructured ceramics sintered by different methods

918

Microstructure and electrical properties of ZnO-based varistors prepared by high-energy ball milling

919

Microstructure and electrical properties of ZnO–Bi2O3-based varistor ceramics by different sintering processes

920

Microstructure and electrical properties of ZnO–ZrO2–Bi2O3–M3O4 (MCo, Mn) varistors

921

Microstructure and electrical transport in nano-grain sized Ce0.9Gd0.1O2−δ ceramics

922

Microstructure and electrical–optical properties of cesium tungsten oxides synthesized by solvothermal reaction followed by ammonia annealing

923

Microstructure and electrochemical behavior of a rapidly solidified V3TiNi0.56Hf0.24Mn0.15Cr0.1 hydrogen storage alloy

924

Microstructure and electrochemical behavior of Cr-added V2.1TiNi0.4Zr0.06Cr0.152 hydrogen storage electrode alloy

925

Microstructure and electrochemical behavior of laser cladded Fe-Cr-Mo-Si-N surface alloys on carbon steel

926

Microstructure and electrochemical behavior of laser cladded Fe-Cr-Mo-Si-N surface alloys on carbon steel

927

Microstructure and electrochemical behavior of laser treated FeCr and FeCrSiN surface alloyed layers on carbon steel

928

Microstructure and electrochemical behavior of laser treated FeCr and FeCrSiN surface alloyed layers on carbon steel

929

Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass

930

Microstructure and electrochemical characteristics of La0.7Ce0.3Ni3.75Mn0.35Al0.15Cu0.75-x(V0.81Fe0.19)x hydrogen storage alloys

931

Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetallic alloys

932

Microstructure and electrochemical hydriding/dehydriding properties of ball-milled TiFe-based alloys

933

Microstructure and electrochemical hydrogen storage characteristics of (La0.7Mg0.3)1−xCexNi2.8Co0.5 (x = 0–0.20) electrode alloys

934

Microstructure and electrochemical hydrogen storage characteristics of La0.67Mg0.33−xCaxNi2.75Co0.25 (x = 0–0.15) electrode alloys

935

Microstructure and electrochemical investigations of La0.76−xCexMg0.24Ni3.15Co0.245Al0.105 (x = 0, 0.05, 0.1, 0.2, 0.3, 0.4) hydrogen storage alloys

936

Microstructure and electrochemical performance of LiNi0.6Co0.4−xMnxO2 cathode materials

937

Microstructure and electrochemical performances of La0.7Mg0.3Ni2.55−xCo0.45Mx (M = Cu, Cr, Al; x = 0–0.4) hydrogen storage alloys prepared by casting and rapid quenching

938

Microstructure and electrochemical properties of a nanometer-scale tin anode for lithium secondary batteries

939

Microstructure and electrochemical properties of cathode materials for SOFCs prepared via pulsed laser deposition

940

Microstructure and electrochemical properties of graphite and C-coated LiFePO4 films fabricated by aerosol deposition method for Li ion battery

941

Microstructure and electrochemical properties of LaNi4–xFeMnx (x=0–0.8) hydrogen storage alloys

942

Microstructure and electrochemical properties of magnetron-sputtered LiCoO2/LiNiO2 multi-layer thin film electrode

943

Microstructure and electrochemical properties of melt-spun Nd0.8Mg0.2(Ni0.8Co0.2)3.8 hydrogen storage alloy

944

Microstructure and electrochemical properties of nanostructured WC–10Co–4Cr coating prepared by HVOF spraying

945

Microstructure and electrochemical properties of rapidly solidified alloy Ml(NiCoMnTi)5

946

Microstructure and electrochemical properties of some synthetic carbons

947

Microstructure and electrochemical properties of the bonding zone of AISI 316L steel joined with a Fe-based amorphous foil

948

Microstructure and electrochemical properties of Ti-containing AB2 type hydrogen storage electrode alloy

949

Microstructure and electrochemical properties of Ti–V-based multiphase hydrogen storage electrode alloys

950

Microstructure and electrochemical properties of Zr–Ti–V–Ni–Mn–LM alloys for application in Ni–MH secondary battery

951

Microstructure and electromagnetic characteristics of BaTiO3/Ni hybrid particles prepared by electroless plating

952

Microstructure and electromagnetic properties of Al18B4O33w/Co composite particles prepared by electroless plating method

953

Microstructure and electromagnetic properties of flake-like Nd–Fe–B nanocomposite powders with different milling times

954

Microstructure and electronic characterization of InGaAs containing layers of self-assembled ErAs nanoparticles

955

Microstructure and electrophysical properties of SnO2, ZnO and In2O3 nanocrystalline films prepared by reactive magnetron sputtering

956

Microstructure and elemental distribution of americium-containing uranium plutonium mixed oxide fuel under a short-term irradiation test in a fast reactor

957

Microstructure and elemental distribution of multicrystal Ag/Cu interface in bimetallic strips with diffusion treatment

958

Microstructure and elevated tensile properties of submicron SiCp/AZ91 magnesium matrix composite

959

Microstructure and elevated-temperature erosion-oxidation behaviour of aluminized 9Cr-1Mo Steel

960

Microstructure and emission ability of rare earth oxides doped molybdenum cathodes

961

Microstructure and emission properties of Si nanograins and Er-doped silica films obtained by reactive magnetron co-sputtering

962

Microstructure and energy-storage performance of PbO–B2O3–SiO2–ZnO glass added (Pb0.97La0.02)(Zr0.97Ti0.03)O3 antiferroelectric thick films

963

Micro-structure and Engineering Behaviour of Weakly Bonded Soil

964

Microstructure and enhanced H2S sensing properties of Pt-loaded WO3 thin films

965

Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression

966

Microstructure and erosion characteristic of nodular cast iron surface modified by tungsten inert gas

967

Microstructure and erosion resistance enhancement of nodular cast iron by laser melting

968

Microstructure and erosive wear behavior of weld deposits of high manganese electrode

969

Microstructure and erosive wear in ceramic-based composites

970

Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP Original Research Article

971

Microstructure and fabric development in ice: Lessons learned from in situ experiments and implications for understanding rock evolution

972

Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels

973

Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints

974

Microstructure and failure mode of Sn–37Pb soldered in laser diode packages

975

Microstructure and fast ionic conduction of inorganic fluoride and oxide eutectic composites prepared from the melt

976

Microstructure and fatigue behavior of cold spray coated Al5052 Original Research Article

977

Microstructure and fatigue behaviors of a biomedical Ti–Nb–Ta–Zr alloy with trace CeO2 additions

978

Microstructure and fatigue crack growth mechanisms in high temperature titanium alloys

979

Microstructure and fatigue fracture mechanism for a heavy-duty truck diesel engine crankshaft

980

Microstructure and fatigue performance of butt-welded joints in advanced high-strength steels

981

Microstructure and fatigue performance of single and multiple linear fiber laser welded DP980 dual-phase steel

982

Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels

983

Microstructure and fatigue properties of Mg-to-steel dissimilar resistance spot welds

984

Microstructure and fatigue properties of plasma transferred arc alloying TiC-W-Cr on gray cast iron

985

Microstructure and fatigue properties of the ultrafine-grained AM60 magnesium alloy processed by equal-channel angular pressing

986

Microstructure and ferroelectric properties of soft-doped sol–gel derived PZT/SKN fibers

987

Microstructure and ferroelectric properties of sol–gel graded PZT (40/52/60) and (60/52/40) thin films

988

Microstructure and field emission characteristics of ZnO nanoneedles grown by physical vapor deposition

989

Microstructure and field emission of diamond particles on silicon tips

990

Microstructure and flow behavior of Ni–Cr–Fe welds with Nb and Mo additions

991

Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy

992

Microstructure and flow behaviour of liquid water-gelatin-locust bean gum systems

993

Microstructure and formation mechanism of CdS/Titanate rose-like nanostructures

994

Microstructure and formation mechanism of CdS/Titanate rose-like nanostructures

995

Microstructure and formation mechanism of titanium dioxide nanotubes

996

Microstructure and formation of melting zone in the interface of Ti/NiCr explosive cladding bar

997

Microstructure and Formation Process of the Characteristic Reddish Color Pattern Hidasuki on Bizen Stoneware: Reactions Involving Rice Straw

998

Microstructure and fracture behavior of β-Si3N4 based nanoceramics

999

Microstructure and fracture characteristics of alumina-based prismatic ceramic composites

1000

Microstructure and fracture characteristics of spot-welded DP600 steel

بازگشت