<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modeling of in-ladle direct thermal control rheocasting process
2
Modeling of in-situ crystallization processes in the Permian mafic layered intrusion of Mont Collon (Dent Blanche nappe, western Alps)
3
Modeling of in-stream tidal energy development and its potential effects in Tacoma Narrows, Washington, USA
4
Modeling of insulated CFRP-strengthened reinforced concrete T-beam exposed to fire
5
Modeling of integral-type Stirling refrigerator using system dynamics approach
6
Modeling of integrated marine ecosystem including the generation-tracing type scallop growth model
7
Modeling of integrated marine ecosystem including the generation-tracing type scallop growth model
8
Modeling of interactions among sustainability components of an agro-ecosystem using local knowledge through cognitive mapping and fuzzy inference system
9
Modeling of interconnection subsystems for massively parallel computers
10
Modeling of Interdendritic Strain and Macrosegregation for Dendritic Solidification Processes: Part I. Theory and Experiments
11
Modeling of Interdendritic Strain and Macrosegregation for Dendritic Solidification Processes: Part II. Computation of Interdendritic Strain and Segregation Fields in Steel Ingots
12
Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio
13
Modeling of interfacial crack velocities in snow
14
Modeling of interfacial debonding crack in particle reinforced composites using Voronoi cell finite element method
15
Modeling of interfacial modification effects on thermal conductivity of carbon nanotube composites
16
Modeling of interference fits taking form defects of the surfaces in contact into account
17
Modeling of internal combustion engine based cogeneration systems for residential applications
18
Modeling of internal curing in maturing mortar
19
Modeling of internal moisture transport during durum wheat pasta drying Original Research Article
20
Modeling of internal stresses and interface effects in metals
21
Modeling of intra-crystalline hardening of materials with particles
22
Modeling of in-vehicle human exposure to ambient fine particulate matter
23
Modeling of in-vehicle magnetic refrigeration
24
Modeling of investment attractiveness of countries using entropy analysis of regional stock markets
25
Modeling of ion and water transport in the polymer electrolyte membrane of PEM fuel cells
26
Modeling of Ion Complexation and Extraction Using Substructural Molecular Fragments
27
Modeling of ion exchange expanded-bed chromatography for the purification of C-phycocyanin
28
Modeling of ion-exchanged glass waveguide structures
29
Modeling of ionic diffusivity in non-saturated cement-based materials using lattice Boltzmann method
30
Modeling of ionic relaxation around a biomembrane disk
31
Modeling of ionic transport in electric-stimulus-responsive hydrogels
32
Modeling of ionization produced by fast charged particles in gases
33
Modeling of ionization produced by fast charged particles in gases
34
Modeling of ionization–recombination processes in the atmospheric surface layer
35
Modeling of ionizing irradiation influence on Schottky-gate field-effect transistor
36
Modeling of ionizing irradiation influence on Schottky-gate field-effect transistor
37
Modeling of ionospheric parameter variations in East Asia during the moderate geomagnetic disturbances Original Research Article
38
Modeling of ionospheric scintillation at low-latitude Original Research Article
39
Modeling of ion-pairing effect in peptide reversed-phase chromatography
40
Modeling of iron diffusion in the iron oxides magnetite and hematite with variable stoichiometry Original Research Article
41
Modeling of iron K lines: Radiative and Auger decay data for
42
Modeling of iron losses of permanent-magnet synchronous motors
43
Modeling of iron ore pelletization using 3 ** (k–p) factorial design of experiments and polynomial surface regression methodology
44
Modeling of irradiation hardening of polycrystalline materials
45
Modeling of irregular structures for the construction simulation in virtual reality environments based on web
46
MODELING OF IRRIGATION AND DRAINAGE CANALS FOR CONTROLLER DESIGN
47
MODELING OF IRRIGATION AND DRAINAGE CANALS FOR CONTROLLER DESIGN
48
modeling of isentropic coefficients used in one dimensional model to predict ejector performance at critical mode
49
Modeling of isobaric stages of adsorption cooling cycle: Transient and quasi-stationary regimes
50
Modeling of isobaric–isothermal chemical vapor infiltration: effects of reactor control parameters on a densification
51
Modeling of isothermal processes in porous materials on the basis of the concept of an ensemble of pores
52
Modeling of isothermal solid-state precipitation using an analytical treatment of soft impingement Original Research Article
53
Modeling of ITER related vacuum gas pumping distribution systems
54
Modeling of IT-SOFC with indirect internal reforming operation fueled by methane: Effect of oxygen adding as autothermal reforming
55
Modeling of jet electrochemical machining using numerical and design of experiments methods
56
Modeling of Jitter Characteristics for the Second Order Bang-Bang CDR
57
Modeling of joints with clearance in flexible multibody systems
58
Modeling of karst and alluvial springs discharge in the central Alborz highlands and on the Caspian southern coasts
59
Modeling of kinetic behavior of the lead dioxide electrode in a lead–acid battery by means of electrochemical impedance spectroscopy
60
Modeling of kinetics and deactivation in the direct epoxidation of propene over gold–titania catalysts
61
Modeling of kinetics and stereoselectivity in liquid-phase α-pinene hydrogenation over Pd/C Original Research Article
62
Modeling of kinetics, equilibrium and distribution data of osmotically dehydrated carambola (Averrhoa carambola L.) in sugar solutions Original Research Article
63
Modeling of kraft recovery boilers
64
Modeling of laminar pulverized coal flames with speciated devolatilization and comparisons with experiments
65
Modeling of laminated rubber bearings using an analytical stiffness matrix
66
Modeling of land subsidence due to groundwater overexploitation using elastoplastic Mohr-Coulomb model in Arak plain, Iran
67
Modeling of land subsidence induced by groundwater withdrawal using Artificial Neural Network (A case study in central Iran)
68
Modeling of large deformation – Large sliding contact via the penalty X-FEM technique
69
Modeling of large inelastic deformations of foams with respect to the point of compaction
70
Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic ϕ-model-based grain-interaction
71
Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology
72
Modeling of laser beam welding of stainless steel sheet butt joint using neural networks
73
Modeling of laser induced plasma, spectroscopic and time of flight experiments in pulsed laser deposition
74
Modeling of laser reflectance evolution during metalorganic vapor phase epitaxy growth of GaN using SiN treatment
75
Modeling of lateness distributions depending on the sequencing method with respect to productivity effects
76
Modeling of latent hardening produced by complex loading paths in FCC alloys
77
MODELING OF LATERALLY SUPPORTED EMBEDDED STRUCTURES
78
Modeling of lattice constant and their relations with ionic radii and electronegativity of constituting ions of A2XY6 cubic crystals (A=K, Cs, Rb, Tl; X=tetravalent cation, Y=F, Cl, Br, I) Original Research Article
79
Modeling of lattice structure and dynamics of Ge doped α-quartz
80
Modeling of layered timber beams and ribbed shell frameworks
81
Modeling of leaching from cementitious materials used in underground environment
82
Modeling of lean premixed combustion in stationary gas turbines
83
Modeling of LEO orbital debris populations for ORDEM2008 Original Research Article
84
Modeling of Li diffusivity in Li2O by molecular dynamics simulation
85
Modeling of life deterioration by ion bombardment of a dispenser cathode coated with an Ir/W film
86
Modeling of lifting heavy oil assisted by enclosed thermal fluid circulation in hollow rod
87
Modeling of light depolarization by cubic and hexagonal particles in noctilucent clouds
88
Modeling of lightcurves of binary asteroids
89
Modeling of light-induced degradation of amorphous silicon solar cells
90
Modeling of Lightning Return Stroke Current With Inclusion of Distributed Channel Resistance and Inductance
91
MODELING OF LINE PARAMETERS FOR THE BROADBAND POWER LINE CARRIER CHANNEL
92
Modeling of liquid ceramic precursor droplets in a high velocity oxy-fuel flame jet Original Research Article
93
Modeling of liquid desiccant drying method for gelcast ceramic parts
94
Modeling of liquid emulsion membranes facilitated by two carriers
95
Modeling of liquid fuel combustion in fluidized bed
96
Modeling of liquid metal flow and heat transfer in delivery tube during gas atomization
97
Modeling of liquid metal flow and heat transfer in delivery tube during gas atomization
98
Modeling of Liquid-Liquid Equilibria of Aqueous Alcohol + Salt Systems Using a Modified NRTL
99
Modeling of liquid–liquid equilibrium in the quinary system of water, acetone, n-butanol, ethanol, and ionic liquid
100
Modeling of liquid–liquid equilibrium of polyethylene glycol-salt aqueous two-phase systems—the effect of partial dissociation of the salt
101
Modeling of lithium ion cells—A simple equivalent-circuit model approach
102
Modeling of lithium segregation induced delamination of a-Si thin film anode in Li-ion batteries
103
Modeling of Living Cationic Ring-Opening Polymerization of Cyclic Ethers: Active Chain End versus Activated Monomer Mechanism
104
Modeling of local buckling in tubular steel frames subjected to cyclic loading
105
Modeling of local controllers in distribution network applications
106
Modeling of local scour depth downstream hydraulic structures in trapezoidal channel using GEP and ANNs
107
Modeling of localized neutral particle sources in 3D edge plasmas
108
Modeling of location-distribution considering customers with diff erent priorities by a lexicographic approach
109
Modeling of Loneliness in Mothers with Children having Specific Learning Disorders based on Coping Strategies with the Mediating Role of Self-Efficacy
110
Modeling of long nonlinear waves on the interface in a horizontal two-layer viscous channel flow
111
Modeling of long-range transport on Taiwanʹs acid deposition under different weather conditions
112
Modeling of long-term creep behavior of structural epoxy adhesives
113
Modeling of Long-Term Water Rock Interaction in the Bohemian Cretaceous Basin
114
Modeling of losses in switched reluctance machines
115
Modeling of low-density lipoprotein (LDL) transport in the artery—effects of hypertension
116
Modeling of lower hybrid antennas using the ALOHA code and comparisons with Tore Supra experiments
117
Modeling of low-pressure subcooled boiling flow of water via the homogeneous MUSIG approach Original Research Article
118
Modeling of low-temperature specific heat data for Ge27As13S60 and As40S60 glasses by means of the phenomenologically modified soft potential model Original Research Article
119
Modeling of lubricant performance in Kurt Orbahn tests for viscosity modifiers based on star polymers
120
Modeling of luminescence-based oxygen sensors with non-uniform distribution of excitation and quenching characteristics inside active medium
121
Modeling of machine failures in a flexible manufacturing cell with two machines served by a robot
122
Modeling of machine failures in a flexible manufacturing cell with two machines served by a robot
123
Modeling of machine tools using smart interlocking software blocks
124
MODELING OF MACHINING PROCESS USING ADAPTIVE NEURO-FUZZY INFERENCE SYSTEM (ANFIS) TO PREDICT PROCESS OUTPUT VARIABLES: A REVIEW
125
Modeling of macrosegregation and microporosity formation during transient directional solidification of aluminum alloys
126
Modeling of macrosegregation in direct-chill casting of aluminum alloys: Estimating the influence of casting parameters
127
Modeling of magnetically controlled Si-based optoelectronic devices
128
Modeling of magnetic-field coupling with cable bundle harnesses
129
Modeling of magnetizing and core-loss currents in single-phase transformers with voltage harmonics for use in power flow
130
Modeling of magnetron sputtering plasmas
131
Modeling of major martian magnetic anomalies: Further evidence for polar reorientations during the Noachian
132
Modeling of Malaria Incidence in Nepal
133
Modeling of Management Processes of Construction Company Business for Increase in its Competitive Stability
134
Modeling of Manufacturing of Field-Effect Heterotransistors without P-n-junctions to Optimize Decreasing their Dimensions
135
Modeling of manufacturing processes by learning systems: The naïve Bayesian classifier versus artificial neural networks
136
Modeling of manufacturing processes using a Petri-net representation
137
Modeling of manufacturing systems and robot motions
138
Modeling of marginal burning state of fire spread in live chaparral shrub fuel bed
139
Modeling of marine circulation and hypothetical discharges in Callao Bay, Peru
140
Modeling of marine litter drift and beaching in the Japan Sea
141
Modeling of Martian seasonal caps from HEND/ODYSSEY data Original Research Article
142
Modeling of masonry failure surface under biaxial compressive stress using Neural Networks
143
Modeling of masonry of infilled frames, Part I: The plastic concentrator
144
Modeling of masonry of infilled frames, Part II: Cracking and damage
145
Modeling of mass and charge transfer in an inverted rotating disk electrode (IRDE) reactor
146
Modeling of mass and energy transfers in a high temperature membrane electrolyser
147
Modeling of mass transfer and initiation of hygroscopically induced cracks in rice grains in a thermally controlled soaking condition: With dependency of diffusion coefficient to moisture content and temperature – A 3D finite element approach Original Res
148
Modeling of mass transfer sintered clay membranes for application to treat water Original Research Article
149
Modeling of mass transport of aqueous solutions of multi-solute organics through reverse osmosis membranes in case of solute–membrane affinity: Part 1. Model development and simulation
150
Modeling of Material Creep Damage Process with a Superimposed High-Frequency Cyclic Component
151
Modeling of Material Deformation Kinetics in the Prefracture Zone
152
Modeling of material failure in foam-based components
153
Modeling of material removal rate and surface roughness in finishing of bevel gears by electrochemical honing process
154
Modeling of material removal rate in rotary ultrasonic machining: designed experiments
155
Modeling of materials behavior at various temperatures of hot isostatically pressed superalloys
156
Modeling of materials mixing behavior among beryllium, carbon and tungsten as plasma-facing materials under deuterium and tritium plasma bombardment
157
Modeling of Maximum Solar Power Tracking by Genetic Algorithm Method
158
Modeling of Maximum Solar Power Tracking by Genetic Algorithm Method
159
Modeling of measured target pressure profiles in three hypervelocity impact experiments
160
Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm
161
Modeling of mechanical behavior and design criteria for SiCf/SiC composite structures in fusion reactors
162
Modeling of mechanical behavior of ultra fine grained aluminum produced by multiple compressions in a channel die
163
Modeling of mechanical bond–slip for steel-reinforced concrete under thermal loads
164
Modeling of mechanical damage detection in CFRPs via electrical resistance
165
Modeling of mechanical properties and durability of recycled aggregate concretes
166
Modeling of mechanical properties of alloy CMSX-4
167
Modeling of mechanical property degradation by short-term aging at high temperatures
168
Modeling of mechanical stimulation of hair cells in otolithic organs Original Research Article
169
Modeling of Mechanical Systems Using Rigid Bodies and Transmission Line Joints
170
Modeling of Mechanical Systems Using Rigid Bodies and Transmission Line Joints
171
Modeling of mechanical twinning in a high manganese content austenitic steel
172
Modeling of mechanical twinning in a high manganese content austenitic steel
173
Modeling of mechanical twinning in a high manganese content austenitic steel
174
Modeling of medium-Sized magnitudes of earthquakes
175
Modeling of melt conveying and heat transfer in a twin-screw cheese stretcher Original Research Article
176
Modeling of melt conveying in a deep-channel single-screw cheese stretcher Original Research Article
177
Modeling of melt electrospinning for semi-crystalline polymers
178
Modeling of membrane action in floor slabs subjected to fire
179
Modeling of membrane fouling and flux decline in reverse osmosis during separation of oil in water emulsions Original Research Article
180
Modeling of mercury desorption from activated carbon at elevated temperatures under fluidized/fixed bed operations
181
Modeling of mercury emission, transport and deposition in North America
182
Modeling of mercury sorption by activated carbon in a confined, a semi-fluidized, and a fluidized bed
183
Modeling of mesoscale coupled ocean–atmosphere interaction and its feedback to ocean in the western Arabian Sea
184
Modeling of metal binding in tropical Fluvisols and Acrisols treated with biosolids and wastewater Original Research Article
185
Modeling of metal forming processes: implementation of an iterative solver in the flow formulation
186
Modeling of metalo-static pressure on the metal–mould interface thermal resistance in the casting process
187
Modeling of methane bubbles released from large sea-floor area: Condition required for methane emission to the atmosphere
188
Modeling of methane fed solid oxide fuel cells: Comparison between proton conducting electrolyte and oxygen ion conducting electrolyte
189
Modeling of Methane Hydrate Decomposition by Using Chemical Affinity
190
Modeling of methane permeation through a defective region in MFI-type zeolite membranes Original Research Article
191
Modeling of methanol to olefins (MTO) process in a circulating fluidized bed reactor
192
Modeling of microburst outflows using impinging jet and cooling source approaches and their comparison
193
Modeling of micro-crack growth during thermal shock based on microstructural images of thermal barrier coatings
194
Modeling of microemulsion phase diagrams from excess Gibbs energy models
195
Modeling of microreactor for methane dry reforming: Comparison of Langmuir–Hinshelwood kinetic and microkinetic models
196
Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation
197
Modeling of microstructure and constitutive relation during superplastic deformation by fuzzy-neural network
198
Modeling of microstructure and mechanical behavior of ultra fine grained aluminum produced by accumulative roll-bonding
199
Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing
200
Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing
201
Modeling of microstructure evolution and mechanical property change of reduced-activation martensitic steel during varying-temperature irradiation
202
Modeling of Microstructure Evolution in 22MnB5 Steel during Hot Stamping Original Research Article
203
Modeling of microstructure evolution in austenitic stainless steels irradiated under light water reactor condition
204
Modeling of microstructure refinement in Ti–6Al–4V alloy by hydrogen treatment
205
Modeling of microwave heating of andesite and minerals
206
Modeling of microwave-convective drying of pistachios
207
Modeling of mid-infrared dust emission from P\Swift-Tuttle
208
Modeling of minibands and electronic transport in one-dimensional stacks of InAs/GaAs quantum dots
209
Modeling of minimum uncut chip thickness in micro machining of aluminum
210
Modeling of mixed-mode chromatography of peptides
211
Modeling of mixed-mode crack growth in ductile thin sheets under combined in-plane and out-of-plane loading
212
Modeling of Mixing in 96-Well Microplates Observed with Fluorescence Indicators
213
Modeling of Mixing Time for Bioreactors with Self-Inducing Impellers
214
Modeling of mobility in organic thin-film transistor based octithiophene (8T)
215
Modeling of mode control and noise in self-pulsating PhaseCOMB lasers
216
Modeling of mode-I fatigue crack growth in quasibrittle structures under cyclic compression
217
Modeling of modified atmosphere packaging based on designs with a membrane and perforations
218
Modeling of moisture diffusion in the presence of bi-axial damage in polymer matrix composite laminates
219
Modeling of moisture migration in an FRP reinforced masonry structure
220
Modeling of moisture profiles in paddy rice during drying mapped with magnetic resonance imaging
221
Modeling of moisture, color and texture changes in sesame seeds during the conventional roasting Original Research Article
222
Modeling of Moisture-Dependent Properties and Mineral Contents of Dry Mushroom
223
Modeling of molar volume of the sigma phase involving transition elements
224
Modeling of mold filling of Al gravity casting and validation with X-ray in-situ observation
225
Modeling of molecular gas adsorption isotherms on porous materials with hybrid PC-SAFT–DFT
226
Modeling of molecular weight distribution of propylene slurry phase polymerization on supported metallocene catalysts
227
Modeling of Molten Metal Flow in a Continuous Casting Process Considering the Effects of Argon Gas Injection and Static Magnetic-Field Application
228
Modeling of Monolith Reactor Washcoated with CuZSM5 Catalyst for Removing NO from Diesel Engine by Urea
229
Modeling of Monolith-Supported Affinity Chromatography
230
Modeling of morphological evolution of columnar dendritic grains in the molten pool of gas tungsten arc welding
231
Modeling of morphology evolution in the injection molding process of thermoplastic polymers
232
Modeling of Mortgage-Backed Securities based on stochastic processes
233
Modeling of Moving Boundaries in Large Plasticity Deformations via an Enriched Arbitrary Lagrangian-Eulerian FE Method
234
Modeling of mud filtrate invasion and damage zone formation
235
Modeling of multicomponent glasses: a review
236
Modeling of multicomponent homogeneous nucleation using continuous thermodynamics
237
Modeling of multicomponent mass transfer across polymer films using a thermodynamically consistent formulation of the Maxwell–Stefan equations in terms of volume fractions
238
modeling of multicomponent multiphase mixture flows on the basis of the density-functional method
239
Modeling of multicomponent systems: Role of Mo and Si on the interaction of Al and γ-UMo
240
Modeling of multicomponent vapor–liquid equilibria for polymer–solvent systems
241
Modeling of multidimensional freezing problem during cryosurgery by the dual reciprocity boundary element method
242
Modeling of multi-dimensional impurity transport in a realistic tokamak geometry
243
Modeling of multi-electrolyte transport in charged ceramic and organic nanofilters using the computer simulation program NanoFlux Original Research Article
244
Modeling of Multi-Level Capacitated Lot-Size Scheduling Problem
245
Modeling of multiphase liquid equilibria for multicomponent mixtures
246
Modeling of multi-phase moisture transfer and induced stress in drying clay bricks
247
Modeling of multiple cracking and decohesion of a thin film on a polymer substrate
248
Modeling of multiple-quantum-well solar cells including capture, escape, and recombination of photoexcited carriers in quantum wells
249
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions
250
Modeling of multistage electrochemical shaping
251
Modeling of multi-strata forest fire severity using Landsat TM Data
252
Modeling of musculoskeletal structure and function using a modular bond graph approach
253
Modeling of Nanofiltration for Concentrated Electrolyte Solutions using Linearized Transport Pore Model
254
Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model
255
Modeling of nanoindentation of bulk and thin film by finite element method
256
Modeling of nano-particle precipitation process in a membrane dispersion micro-structured reactor
257
Modeling of nanoparticles’ aggregation and sedimentation in nanofluid
258
Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus
259
Modeling of nanoscale transport phenomena: Application to information technology
260
Modeling of nanostructural design of ultrafine mullite powder particles obtained by ultrasonic spray pyrolysis
261
Modeling of nanostructured TiO2 spheres obtained by ultrasonic spray pyrolysis
262
Modeling of natural convection with Smoothed Particle Hydrodynamics: Non-Boussinesq formulation
263
Modeling of natural turbulent flow in a passively heated zone
264
Modeling of Navier–Stokes equations for high Knudsen number gas flows
265
Modeling of network degradation in mixed step-chain growth polymerizations
266
Modeling of neutron irradiation response for B2-type ordered alloys
267
MODELING OF NEW PROCESS IN MIDREX SYNGAS SYSTEM
268
Modeling of next generation network deployment in developing countries
269
Modeling of NH3–NO–SCR reaction over CuO/γ-Al2O3 catalyst in a bubbling fluidized bed reactor using artificial intelligence techniques
270
Modeling of Ni–Cr–Mo based alloys: Part II — Kinetics
271
Modeling of Ni–Cr–Mo based alloys: Part II — Kinetics
272
Modeling of Ni–Cr–Mo based alloys: Part I—phase stability
273
Modeling of Ni–Cr–Mo based alloys: Part I—phase stability
274
Modeling of niobium precipitates effect on the Ni47Ti44Nb9 Shape Memory Alloy behavior
275
Modeling of Nitrate Adsorption and Reduction in Fe0-Packed Columns through Impulse Loading Tests
276
Modeling of nitrate and bromate in a seawater aquarium
277
Modeling of nitrate removal for ion exchange resin in batch and fixed bed experiments Original Research Article
278
Modeling of nitric oxide formation in high-pressure premixed laminar ethane flames
279
Modeling of Nitric Oxide Formation in Single Cylinder Direct Injection Diesel Engine Using Diesel-Water Emulsion
280
Modeling of nitric oxide formation in spark ignition engines with a multizone burned gas
281
Modeling of nitrogen oxides formation and destruction in combustion systems
282
Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding
283
Modeling of nitro-polycyclic aromatic hydrocarbon formation and decay in the atmosphere
284
Modeling of NO formation in premixed, high-pressure methane flames
285
Modeling of NO oxidation and NOx storage on Pt/BaO/Al2O3 NOx traps
286
Modeling of non-adiabatic capillary tube flows: A simplified approach and comprehensive experimental validation
287
Modeling of non-catalytic partial oxidation of natural gas under conditions found in industrial reformers
288
Modeling of nondispersive extraction of binary Zn(II) and Cu(II) with D2EHPA in hollow fiber devices
289
Modeling of non-equilibrium argon–oxygen induction plasmas under atmospheric pressure
290
Modeling of noninvasive microwave characterization of breast tumors
291
Modeling of non-isothermal annealing: Interaction of recrystallization, recovery, and precipitation Original Research Article
292
Modeling of non-isothermal crystallization kinetics of isotactic polypropylene
293
Modeling of nonlinear complex stiffness of dual-chamber pneumatic spring for precision vibration isolations
294
Modeling of nonlinear optic and ESR response of CDW MX Materials
295
Modeling of nonlinear optical properties of two-dimensional molecular aggregates
296
Modeling of nonlinear passage of acoustic waves caused by underground fracturing through the lithosphere
297
Modeling of non-linear phenomena during deformation of interparticle necks by diffusion-controlled creep Original Research Article
298
Modeling of non-linear systems by FWNNs and their intelligent control
299
Modeling of Nonlinear Systems with Friction Structure Using Multivariable Taylor Series Expansion
300
Modeling of nonlinear viscoelasticity at large deformations
301
Modeling of Non-Point Source Pollution by Long-Term Hydrologic Impact Assessment (L-THIA) (Case Study: Zayandehrood Watershed) in 2015
302
Modeling of Non-Point Source Pollution by Long-Term Hydrologic Impact Assessment (L-THIA) (Case Study: Zayandehrood Watershed) in 2015
303
modeling of non-point source pollution by long-term hydrologic impact assessment (l-thia) (case study: zayandehrood watershed) in 2015
304
Modeling of nonreacting and reacting turbulent spray jets using a fully stochastic separated flow approach
305
Modeling of non-reactive solute transport in fractured clayey till during variable flow rate and time
306
Modeling of non-stationary autoregressive alpha-stable processes by particle filters
307
Modeling of nonstationary time-series data. Part I. Data with regular periodic trends
308
Modeling of nonstationary time-series data. Part II. Dynamic periodic trends
309
Modeling of nonsymmetrical damage in plate-like structures
310
Modeling of normal and erosive burning rate of a hot double-base homogeneous propellant
311
Modeling of normalized coprime factors with ν-metric uncertainty
312
Modeling of Novel Microfluidic based Flow Sensor Inspired from Fish Canal Neuromast for Underwater Sensing
313
Modeling of NOx conversion during combustion under high CO2 concentration using detailed chemical kinetics
314
Modeling of NOx emissions from a W-shaped boiler furnace under different operating conditions
315
Modeling of NOx Emissions from the Laboratory Regeneration of Spent Fluid Catalytic Cracking Catalyst
316
Modeling of NOx formation in diesel engines using finite-rate chemical kinetics
317
Modeling of nucleate boiling heat transfer under an impinging free jet
318
Modeling of nucleic acid adsorption on 3D prisms in microchannels Original Research Article
319
Modeling of nuclide releases from perforated radioactive paraffin waste containers
320
Modeling of Occupational Risk Factors in the Development of Musculoskeletal Disorders in Nurses
321
Modeling of ohmic heating patterns of multiphase food products using computational fluid dynamics codes Original Research Article
322
Modeling of oil production by gravity drainage
323
Modeling of Oil Spill and Response in Support of Decreasing Environmental Oil Effects Case Study: Blowout from Khark Subsea Pipelines (Persian Gulf)
324
Modeling of oil–water flow using energy minimization concept
325
Modeling of oleaginous fungal biofilm developed on semi-solid media
326
Modeling of Olefin Gas-Phase Polymerization in a Multizone Circulating Reactor
327
Modeling of one-dimensional spatial effects on the spread of gypsy moths
328
Modeling of one-dimensional spatial effects on the spread of gypsy moths
329
Modeling of opposition effects with ensembles of clusters: Interplay of various scattering mechanisms
330
Modeling of optical absorption of silver prolate nanoparticles embedded in sol–gel glasses
331
Modeling of optical and energy performance of tungsten-oxide-based electrochromic windows including their intermediate states
332
Modeling of optical pumping experiments in CO. I. Time-resolved experiments Original Research Article
333
Modeling of optical pumping experiments in CO: II. Steady conditions Original Research Article
334
MODELING OF OPTICAL TRAPPING USING DOUBLE NEGATIVE INDEX FISHNET METAMATERIALS
335
Modeling of optimal investment in science and technology
336
Modeling of Orange Mass Based on Dimensions
337
Modeling of organic matter removal and nitrification in sewer systems — an approach to wastewater treatment Original Research Article
338
Modeling of orthokinetic flocculation of Saccharomyces cerevisiae Original Research Article
339
Modeling of osmotic kinetics in aqueous solutions, based on experimental data
340
Modeling of outgassing or pumping functions of the constituent elements such as chamber walls and high-vacuum pumps
341
Modeling of Outpatient Prescribing Process in Iran: A Gateway Toward Electronic Prescribing System
342
Modeling of Overdue Receivables in the City Bank Using Factor-based Simulation (Northwestern Provinces of the Country)
343
Modeling of Overflow Metabolism in Batch and Fed-Batch Cultures of Escherichia coli
344
Modeling of overloaded gradient elution of nociceptin/orphanin FQ in reversed-phase liquid chromatography
345
Modeling of oxidation and its effect on crack growth in titanium alloys Original Research Article
346
Modeling of oxidation behavior of SiC-reinforced ceramic matrix composites
347
Modeling of oxidation behavior of SiC-reinforced ceramic matrix composites
348
Modeling of oxidation of structural materials in LBE systems
349
Modeling of Oxidative Coupling of Methane over Mn/Na2WO4/SiO2 Catalyst Using Artificial Neural Network
350
Modeling of oxy-fuel combustion for a western Canadian sub-bituminous coal☆
351
Modeling of oxygen evolution at Teflon-bonded Ti/Co3O4 electrodes
352
Modeling of oxygen gas diffusion and consumption during the oxic transient in a disposal cell of radioactive waste
353
Modeling of oxygen mass transfer in the presence of oxygen-vectors using neural networks developed by differential evolution algorithm
354
Modeling of oxygen mass transfer in the presence of oxygen-vectors using neural networks developed by differential evolution algorithm
355
Modeling of oxygen scavenging for improved barrier behavior: Blend films
356
Modeling of Oxygen Transfer Correlations for Stirred Tank Bioreactor Agitated with Atypical Helical Ribbon Impeller
357
Modeling of ozone formation at a rural site in Southern Ontario
358
Modeling of ozone reactions on aircraft-related soot in the upper troposphere and lower stratosphere
359
Modeling of PAHs adsozrption on Thai Clay Minerals under Seawater Solution Conditions
360
Modeling of Pain Using Artificial Neural Networks
361
Modeling of paint flow rate flux for circular paint sprays by using experimental paint thickness distribution
362
Modeling of palatable food intake in female young adults. Effects of perceived body size
363
Modeling of palatable food intake. The influence of quality of social interaction
364
Modeling of Pantograph-Catenary dynamic stability
365
Modeling of parallel-plate regenerators with non-uniform plate distributions
366
Modeling of parasitic capacitances in deep submicrometer conventional and high-K dielectric MOS transistors
367
Modeling of parasitic plasma under the divertor roof baffle
368
Modeling of particle breakage in a smooth double roll crusher
369
Modeling of particle fluid interactions in a flowing film concentrator
370
Modeling of particle formation by spray drying process
371
Modeling of particle formation by spray pyrolysis using droplet internal circulation
372
Modeling of particle formation processes using gas saturated solution atomization
373
Modeling of particle fracture by repeated impacts using continuum damage mechanics
374
Modeling of particle generation in laser ablation plasma
375
Modeling of particle growth: Application to water treatment in a fluidized bed reactor
376
Modeling of particle removal processes in brush scrubber cleaning
377
Modeling of particulate carbon and species formation in coflowing diffusion flames of ethylene
378
Modeling of particulate production in the SIRENS plasma disruption simulator
379
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
380
Modeling of pattern regulation in melanophores
381
Modeling of patterned mixed-conducting electrodes and the importance of sheet resistance at small feature sizes
382
Modeling of PCCI combustion with FGM tabulated chemistry
383
Modeling of P-dynamics and algal growth in a stratified reservoir—mechanisms of P-cycle in water and interaction between overlying water and sediment
384
Modeling of P-dynamics and algal growth in a stratified reservoir—mechanisms of P-cycle in water and interaction between overlying water and sediment
385
Modeling of pedestrian evacuation based on the particle swarm optimization algorithm
386
Modeling of pedestrian evacuation under fire emergency based on an extended heterogeneous lattice gas model
387
Modeling of PEM fuel cell Pt/C catalyst degradation
388
Modeling of peptide–silica interaction based on four-body corrected fragment molecular orbital (FMO4) calculations
389
MODELING OF PERCEPTION OF TEXTILE CONSUMERS’ SATISFACTION
390
Modeling of perforated plates and screens using rigid frame porous models
391
Modeling of perforation of plates and multi-layered metallic targets
392
Modeling of performance characteristics of OLED
393
Modeling of period overlapping setup times
394
Modeling of peritectic coupled growth in Cu–Sn alloys Original Research Article
395
Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression
396
Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures
397
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic fuel storage
398
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic tanks in the presence of delaminations and stitch cracks
399
Modeling of Personalized E-Learning Environment Based on Intelligent Agents
400
Modeling of pH neutralization process using fuzzy recurrent neural network and DNA based NSGA-II
401
Modeling of phase change material peak load shifting
402
Modeling of phase change materials for applications in whole building simulation
403
Modeling of phase equilibria for the evaporative precipitation of methacrylic acid and acetic acid from aqueous solutions
404
Modeling of phase equilibria with CPA using the homomorph approach
405
Modeling of phase equilibrium of binary mixtures composed by polystyrene and chlorofluorocarbons, hydrochlorofluorocarbons, hydrofluorocarbons and supercritical fluids using cubic and non-cubic equations of state
406
Modeling of phase interfaces during pre-critical crack growth in concrete
407
Modeling of phase inversion phenomenon in two-phase pipe flows
408
Modeling of phase stability of the fcc phases in the Ni–Ir–Al system using the cluster/site approximation method coupling with first-principles calculations Original Research Article
409
Modeling of phenomena occurring in plasma jet during suspension spraying of hydroxyapatite coatings
410
Modeling of phenomenological mechanisms during thermal formation and degradation of an epoxy-based nanocomposite
411
Modeling of Phosphate Removal by Mg-Al Layered Double Hydroxide Functionalized Biochar and Hydrochar from Aqueous Solutions
412
Modeling of phosphorus dynamics in aquatic sediments: II—examination of model performance
413
Modeling of phosphorus dynamics in aquatic sediments: I—model development
414
Modeling of photochemical air pollution in the Barcelona area with highly disaggregated anthropogenic and biogenic emissions
415
Modeling of photodecoloration of azo dye in a cocktail photolysis system
416
Modeling of photodegradation kinetics of aromatic pollutants in water matrix
417
Modeling of photoluminescence spectra and quasi-Fermi level splitting in μc-Si:H solar cells
418
Modeling of Photonics Alcohol Detector System Considering Syari’ah Compliance Beverages
419
Modeling of physical and chemical equilibrium for the direct synthesis of dimethyl carbonate at high pressure conditions
420
Modeling of physical properties of composite materials
421
Modeling of piezoelectric actuator for compensation and controller design
422
Modeling of planar nonshallow prestressed beams towards asymptotic solutions
423
Modeling of Planck-high frequency instrument bolometers using non-linear effects in the thermometers
424
Modeling of Planck-high frequency instrument bolometers using non-linear effects in the thermometers
425
Modeling of plane strain ductile rupture
426
Modeling of plankton community dynamics characterized by algal toxicity and allelopathy: A focus on historical Prymnesium parvum blooms in a Texas reservoir
427
Modeling of plankton community dynamics characterized by algal toxicity and allelopathy: A focus on historical Prymnesium parvum blooms in a Texas reservoir
428
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
429
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
430
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
431
Modeling of plasma/lithium-surface interactions in NSTX: Status and key issues
432
Modeling of plasma-controlled surface evaporation and condensation of Al target under pulsed laser irradiation in the nanosecond regime
433
Modeling of plastic localization in aluminum and Al–Cu alloys under shock loading
434
Modeling of plate heat exchangers with generalized configurations
435
Modeling of plume dynamics with shielding in laser ablation of carbon
436
Modeling of PM10 Particulate Matter in Ahvaz City Using Remote Sensing and Meteorological Parameters
437
Modeling of Polar Systems with the Perturbed-Chain SAFT Equation of State. Investigation of the Performance of Two Polar Terms
438
Modeling of polarization curves not exhibiting a Tafel region using Excel spreadsheets
439
Modeling of polarized infrared contrast of water surface polluted by crude oil
440
Modeling of poly(isoprene) melts on different scales
441
Modeling of polychlorinated biphenyls (PCBs) in the Baltimore Harbor
442
Modeling of polychlorinated biphenyls (PCBs) in the Baltimore Harbor
443
Modeling of polychromatic attenuation using computed tomography reconstructed images
444
Modeling of polychromatic attenuation using computed tomography reconstructed images
445
Modeling of polycrystals using a gradient crystal plasticity theory that includes dissipative micro-stresses
446
Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates
447
Modeling of polyurethane synthesis by reactive extrusion
448
Modeling of Pool Fire Risk in a Chemicals Warehouse
449
Modeling of pore blocking and cake layer formation in membrane filtration for wastewater treatment Original Research Article
450
Modeling of pore wall amorphous structures: influence of wall heterogeneity on the mechanism of adsorption: Krypton and Argon adsorption in MCM-41 pore model
451
Modeling of porosity during spray forming
452
Modeling of porosity during spray forming
453
Modeling of porosity formation in direct chill cast aluminum–magnesium alloys
454
Modeling of porosity formation in direct chill cast aluminum–magnesium alloys
455
Modeling of post-surgical brain and skull defects in the EEG inverse problem with the boundary element method
456
Modeling of powder metallurgy processes
457
Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method
458
Modeling of power generation from the mixing of simulated saline and freshwater with a reverse electrodialysis system: The effect of monovalent and multivalent ions
459
Modeling of Power Supply Noise in Large Chips Using the Circuit-Based Finite-Difference Time-Domain Method
460
Modeling of Power System Communications—Recognition of Technology Maturity Levels and Case Study of a Migration Scenario
461
Modeling of precipitate formation in precursor droplets injected axially into an oxygen/acetylene combustion flame
462
Modeling of precipitated Xe atoms in aluminum and the fresnel effect in hrtem imaging
463
Modeling of precipitation hardening for the naturally aged Al-Mg-Si-Cu alloy AA6111 Original Research Article
464
Modeling of precipitation hardening in Mg-based alloys
465
Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys
466
Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys Original Research Article
467
Modeling of precipitation of ultra-fine particles by pressure reduction over CO2-expanded liquids
468
Modeling of premixed turbulent flames with second moment methods
469
Modeling of Preparation of Chitosan/Tripolyphosphate Nanoparticles Using Machine-Learning Techniques
470
Modeling of preparative chromatography processes with slow intraparticle mass transport kinetics
471
Modeling of Preparative Reversed-Phase HPLC of Insulin
472
Modeling of Pre-service Pre-School Teachers’ Learning Styles based on Mathematical Algorithm
473
Modeling of pressure and shear-driven flows in open rectangular microchannels
474
Modeling of Pressure Dependence of Interfacial Tension Behaviors of Supercritical CO2 + Crude Oil Systems Using a Basic Parachor Expression
475
Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method
476
Modeling of Prestressed Concrete-Filled Circular Composite Tubes Subjected to Bending and Axial Loads
477
Modeling of primary defect aggregation in tracks of swift heavy ions in alkali halides
478
Modeling of process geometry in peripheral milling of curved surfaces
479
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
480
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
481
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
482
Modeling of processes of charge separation in a GaAs detector
483
Modeling of processes of charge separation in a GaAs detector
484
Modeling of Production Strategies from Common Offshore Gas Field with Game Theory Approach
485
Modeling of programming time of nanocrystal flash memory cells
486
Modeling of progressive damage in aligned and randomly oriented discontinuous fiber polymer matrix composites
487
Modeling of progressive delamination in a thin film driven by diffusion-induced stresses
488
Modeling of propane separation from light hydrocarbons by adsorption on 4A molecular sieve zeolite
489
Modeling of proteolysis and lipolysis in Iranian white brine cheese
490
Modeling of proton-induced CCD degradation in the Chandra X-ray Observatory
491
Modeling of PSA separation process including friction pressure drop in adsorbent bed
492
Modeling of pseudoelasticity via reversible slip in Fe3Ga
493
Modeling of pseudo-rational exemption to vaccination for SEIR diseases
494
Modeling of pullulan fermentation by using a color variant strain of Aureobasidium pullulans Original Research Article
495
Modeling of pulp quality parameters from distribution curves extracted from process acoustic measurements on a thermo mechanical pulp (TMP) process
496
MODELING OF PULSATILE BLOOD FLOW IN AN AXISYMMETRIC TUBE WITH A MOVING INDENTATION
497
Modeling of pulsed corona discharge process for the removal of nitric oxide and sulfur dioxide
498
Modeling of Purchase and Sales Contracts in Supply Chain Optimization
499
Modeling of pure compounds surface tension using QSPR
500
Modeling of PV Array and Performance Enhancement by MPPT Algorithm
501
Modeling of pyroclastic flows of Colima Volcano, Mexico: implications for hazard assessment
502
Modeling of Quantization Effects in Digitally Controlled DC–DC Converters
503
Modeling of quantum ballistic transport in double-gate devices with ultra-thin oxides
504
Modeling of quantum effects for ultrathin oxide MOS structures with an effective potential
505
Modeling of quantum effects for ultrathin oxide MOS structures with an effective potential
506
Modeling of quasi-steady sodium droplet combustion in convective environment
507
Modeling of radiation hardening in ferritic/martensitic steel using multi-scale approach
508
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures
509
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures
510
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures Original Research Article
511
Modeling of radiation-induced segregation at grain boundaries in Fe–Cr–Ni alloys
512
Modeling of Radiative Heat Transfer During a PWR Severe Accident
513
Modeling of radionuclide and heavy metal sorption around low- and high-pH waste disposal sites at Oak Ridge, Tennessee Original Research Article
514
Modeling of radionuclides in natural fluids: synthesis and characterization of the Na4(UO2)2(OH)4(C2O4)2 complex
515
Modeling of Rainfall Factor in Soil Erosion Risk in Albania
516
Modeling of Rainfall-Runoff Correlations Using Artificial Neural Network-A Case Study of Dharoi Watershed of a Sabarmati River Basin, India
517
Modeling of Raman spectra of H:LiNbO3
518
Modeling of Rapid Solidification Process in the Gas Atomization of Molten Metals
519
Modeling of rapidly solidified aging process of Cu–Cr–Sn–Zn alloy by an artificial neural network
520
Modeling of rate-dependent phase transition in bacterial flagellar filament
521
Modeling of rates of moisture ingress into photovoltaic modules
522
Modeling of Rayleigh wave dispersion in Iberia
523
Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data
524
Modeling of RDX/GAP/BTTN pseudo-propellant combustion
525
Modeling of reaction kinetics for transesterification of palm-based methyl esters with trimethylolpropane
526
Modeling of reactive kinetics in the metal surface contaminant cleaning using atmospheric pressure plasma arc
527
Modeling of reactive synthesis in consolidated blends of fine Ni and Al powders
528
Modeling of reactive synthesis in consolidated blends of fine Ni and Al powders
529
Modeling of Real Estate Income Tax: System Dynamics Approach
530
Modeling of real-time reliability prediction system for anisotropic conductive film (ACF) processing
531
Modeling of reaustenitization of hypoeutectoid steels with cellular automaton method
532
Modeling of recent volcanic episodes at Phlegrean Fields (Italy): geochemical variations and ground deformation
533
Modeling of reciprocating internal combustion engines for power generation and heat recovery
534
Modeling of recrystallization and austenite grain size for AISI 316 stainless steel and its application to hot bar rolling
535
Modeling of recrystallization in cold rolled copper using inverse cellular automata and genetic algorithms
536
Modeling of recrystallization textures:: interaction of nucleation and growth Original Research Article
537
Modeling of Rectangular Waveguide Junctions Containing Cylindrical Posts
538
Modeling of Refractive Indices for Binary Aqueous Solutions of Some Alkane Polyols at Constant Temperature and Pressure
539
Modeling of reinforced concrete by the non-local microplane model Original Research Article
540
Modeling of reinforced masonry elements
541
Modeling of reinforcement global buckling in RC elements
542
Modeling of relationship between water permeability and microstructure parameters of ceramic membranes Original Research Article
543
Modeling of Relationships between Learning Approaches and Quality of Using Learning Strategies
544
Modeling of relative collision safety including driver characteristics
545
Modeling of relative intensity noise and terminal electrical noise of semiconductor lasers using artificial neural network
546
Modeling of relaxation oscillations in CO oxidation on metallic catalysts with consideration of reconstructive heterogeneity of the surface
547
Modeling of Removal of Chromium (VI) from Aqueous Solutions Using Artificial Neural Network
548
Modeling of removal of sulfur dioxide from flue gases in a horizontal cocurrent gas–liquid scrubber
549
Modeling of renewable energy resources for generation reliability evaluation
550
Modeling of residence time distribution in regrinding Vertimill
551
Modeling of residential structure fire response: Exploring the hyper-project
552
Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading
553
Modeling of residual stress distribution in D2 steel via grinding dynamics using a second-order damping system
554
Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy
555
Modeling of residual stress-induced stress–strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface
556
Modeling of residual stress-induced stress–strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface
557
Modeling of resistance curve of high-angle grain boundary in Fe–3 wt.% Si alloy
558
Modeling of resistance curve of high-angle grain boundary in Fe–3 wt.% Si alloy
559
Modeling of resistance spot welding of multiple stacks of steel sheets
560
Modeling of retention behavior in capillary electrochromatography from chromatographic and electrophoretic data
561
Modeling of retrograde diffusion zoning in garnet: evidence for slow cooling of granulites from the Highland Complex of Sri Lanka
562
Modeling of retrograde nanoparticle transport in axons and dendrites
563
Modeling of reverse osmosis systems Original Research Article
564
Modeling of Reversible Chain Transfer Catalyzed Polymerization by Moment Equations Method
565
Modeling of RF Absorber for Application in the Design of Anechoic Chamber
566
Modeling of RF Waves in Free Space Optical Communication System Under Gamma-Gamma Turbulent Channel Effect
567
Modeling of Rheological Characteristics of “MalasYazdi” (Punicia granatum L.) Pomegranate Juice
568
Modeling of rheological properties of mellorine mix including different oil and gum types by combined design, ANN, and ANFIS models
569
Modeling of rhythmic behavior in neutral lipid production due to continuous supply of limited nitrogen: Mutual growth and lipid accumulation in microalgae
570
Modeling of rice hydration using finite elements Original Research Article
571
Modeling of River Velocity, Temperature, Bed Deformation and its Effects on Rainbow Trout (Oncorhynchus mykiss) Habitat in Lees Ferry, Colorado River
572
MODELING OF RIYADH SEWAGE TREATMENT PLANT: 1-MODEL DEVELOPMENT, VERIFICATION AND SIMULATION
573
Modeling of Road Accidents Using the Model ofRoads of Qazvin, Zanjan and Hamadan)
574
Modeling of Robustness Margins of the Control of a Predictive Control-Supervisory Architecture
575
Modeling of rolling contact fatigue for hard machined components with process-induced residual stress
576
Modeling of rolling texture in aluminum
577
Modeling of rolling texture in aluminum
578
Modeling of rollover sequences
579
Modeling of Rotary Cement Kilns: Applications to Reduction in Energy Consumption
580
Modeling of rotary vane compressor applying artificial neural network
581
Modeling of rotating drum bioreactor for anaerobic solid-state fermentation
582
Modeling of route planning system based on Q value-based dynamic programming with multi-agent reinforcement learning algorithms
583
Modeling of route planning system based on Q value-based dynamic programming with multi-agent reinforcement learning algorithms
584
Modeling of Sago Starch Hydrolysis Using Glucoamylase
585
Modeling of Salmonella typhimurium growth under the effects of Carum copticum essential oil, temperature, pH and inoculum size
586
Modeling of salt tectonics Original Research Article
587
MODELING OF SATURATED HYDRAULIC CONDUCTIVITY AND MEAN SOIL PORE DIAMETER IN AN ALLUVIAL LOAMY SOIL
588
Modeling of scalar dissipation in partially premixed turbulent flames
589
Modeling of scavenging processes in clouds: some remaining questions about the partitioning of gases among gas and liquid phases
590
Modeling of SCC initiation and propagation mechanisms in BWR environments
591
Modeling of scintillation camera systems
592
Modeling of scintillation camera systems
593
Modeling of scroll compressors – Improvements
594
Modeling of Sediment Yield and Bicarbonate Concentration in Kordan Watershed
595
Modeling of sediment yield in Maybar gauged watershed using SWAT, northeast Ethiopia
596
Modeling of seismic hazard for Turkey using the recent neotectonic data
597
Modeling of seismic wave motion in high-rise buildings
598
Modeling of Selective Silver Extraction from Photographic Waste by Emulsion Liquid Membrane System
599
Modeling of self-consistent distributions for longitudinally non-uniform beams
600
Modeling of self-consistent distributions for longitudinally non-uniform beams
601
Modeling of self-excited wake oscillations by amplitude equations
602
Modeling of Self-Healing Concrete: A Review
603
Modeling of self-organized systems interacting with a few individuals: From microscopic to macroscopic dynamics
604
Modeling of Self-regulation based on Cognitive Flexibility with Mediated Role of Psychological Hardiness in Students
605
Modeling of separations by closed-loop steady-state recycling chromatography of a racemic pharmaceutical intermediate
606
Modeling of sequence geometry north of Gargano Peninsula by changing sediment pathways in the Adriatic Sea
607
Modeling of SH- and P-SV-wave fields and seismic microzonation based on response spectra for Talchir Basin, India
608
Modeling of shape memory alloy shells for design optimization
609
Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality
610
Modeling of shear instabilities observed in cylinder collapse experiments performed on ceramic powders Original Research Article
611
Modeling of shear localization during confined granular flow in silos within non-local hypoplasticity
612
Modeling of shear-wall dominant symmetrical flat-plate reinforced concrete buildings
613
Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants
614
Modeling of shrinkage defects during solidification of long and short freezing materials
615
Modeling of SiCf/SiC composite structures for nuclear components
616
Modeling of side reactions of isobutane alkylation with butenes catalyzed by trifluoromethane sulfonic acid Original Research Article
617
Modeling of Sigma Delta Modulator based Phase Locked Loop
618
Modeling of Signal Generation Function and Electron Penetration Effects on the EBIC Signal of Schottky diodes of Ge
619
Modeling of signaling pathways for endocrine disruptors
620
Modeling of silica sol–gel thin films with ballistic aggregation
621
Modeling of silicon atomic-layer-epitaxy
622
Modeling of silicon carbide chemical vapor deposition in a vertical reactor
623
Modeling of silicon carbide chemical vapor deposition in a vertical reactor
624
Modeling of simultaneous ground shock and airblast pressure on nearby structures from surface explosions
625
Modeling of simultaneous heat and mass transfer during convective oven ring cake baking Original Research Article
626
Modeling of simultaneous mass transfer and structural changes in fruit tissues Original Research Article
627
Modeling of single catalyst particle in cathode of PEM fuel cells
628
Modeling of Single Cell Protein Production from Cheese Whey Using Tanks-in-Series Model
629
Modeling of singular stress fields using finite element metho
630
Modeling of site occupancies in B2 FeAl and NiAl alloys with ternary additions Original Research Article
631
Modeling of Six Openers for Seeding Machines, Cross-Shaped, T-Inverse, U-Shaped, V-Shaped, V-Shaped with Two Plates and Tulip-Shaped
632
Modeling of size-dependent internal stresses in dislocation cell structures
633
Modeling of size-exclusion chromatography of electrolytes on non-ionic nanoporous adsorbents
634
Modeling of skutterudite CoSb3 with molecular dynamics method
635
Modeling of slow glutamate diffusion and AMPA receptor activation in the cerebellar glomerulus
636
Modeling of slow time-scale behavior of fast molecular dynamic systems
637
Modeling of smart composite box beams with nonlinear induced strain
638
Modeling of smart composites on account of actuation, thermal conductivity and hygroscopic absorption
639
Modeling of smart concrete beams with shape memory alloy actuators
640
Modeling of smoldering process in a porous biomass fuel rod
641
Modeling of SO2 gas pollutant emission of Arak Refinery using AERMOD model
642
Modeling of SO2 removal in fabric filter
643
Modeling of SO2 scrubbing in spray towers
644
Modeling of SOFC running on partially pre-reformed gas mixture
645
Modeling of SOFC with indirect internal reforming operation: Comparison of conventional packed-bed and catalytic coated-wall internal reformer
646
Modeling of soil displacement and soil strain distribution under a traveling wheel
647
Modeling of soil erosion and sediment transport in the East River Basin in southern China Original Research Article
648
Modeling of Soil Erosion Intensity and Estimation of Soil Erosion Risk in Upper Part of Shkumbini Watershed in Albania
649
Modeling of soil temperature and moisture with and without rice husks in an agriculture greenhouse
650
Modeling of soil vapor extraction (SVE) systems — Part I
651
Modeling of soil vapor extraction (SVE) systems — Part II. Biodegradation aspects of soil vapor extraction
652
Modeling of soil water retention curve using soil solid phase parameters
653
Modeling of soiling based on silica-soda-lime glass exposure at six European sites
654
Modeling of solar passive techniques for roof cooling in arid regions
655
Modeling of Solar Radiation on Part Shaded Walls
656
Modeling of Solar Radiation Potential in Iran Using Artificial Neural Networks
657
Modeling of solid fuel combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 2. Numerical simulations of heat transfer and gaseous pollutant emissions associated with coal combustion in O2/CO2 and O2/N2 atmospheres enriched wi
658
Modeling of solid fuels combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 1. The mathematical model of fuel combustion in oxygen-enriched CFB environment
659
Modeling of Solid Liquid Equilibrium for Tertiary Mixtures of Fatty Acid by Wilson Model
660
Modeling of solid oxide electrolysis cell for syngas generation with detailed surface chemistry
661
Modeling of solid oxide fuel cells for dynamic simulations of integrated systems
662
Modeling of solid particles pyrolysis
663
Modeling of solid waste collection and transportation in metropolitan areas using WAGS model: implication of CO2 emission and external costs
664
Modeling of solidification in twin-roll strip casting
665
Modeling of Solidification Microstructures Based on Fully Coupling of Macro-transport Phenomena with Cellular Automata
666
Modeling of solid–liquid equilibria for systems with solid-complex phase formation
667
Modeling of solid–liquid equilibria in naphthalene, normal-alkane and polyethylene solutions
668
Modeling of Solid-State Polymerization of Bisphenol A Polycarbonate
669
Modeling of solid–supercritical fluid phase equilibria with a cubic equation of state—Gex model
670
Modeling of solutal dendritic growth with melt convection
671
Modeling of solute drag in the massive phase transformation Original Research Article
672
Modeling of solute transport in a single fracture using streamline simulation and experimental validation
673
Modeling of solute transport into sub-aqueous sediments
674
Modeling of solvent effects in the activation of the lipase from Rhizomucor miehei
675
Modeling of some plain load distribution strategies for jobs in a multicomputer system
676
Modeling of some properties of the crushed tile concretes exposed to elevated temperatures
677
Modeling of soot deposition in wavy-fin exhaust gas recirculator coolers
678
Modeling of soot formation during partial oxidation of producer gas
679
Modeling of soot particle inception in aromatic and aliphatic premixed flames
680
Modeling of soot particles growth in fuel-rich premixed flame
681
Modeling of Sorption and Biodegradation of Parathion and Its Metabolite Paraoxon in Soil
682
Modeling of Sorption-Enhanced Steam Reforming in a Dual Fluidized Bubbling Bed Reactor
683
Modeling of space charge dominated performance of the CEBAF FEL injector
684
Modeling of spatial–temporal distribution of the components in the drying sessile droplet of biological fluid
685
Modeling of speech signals using an optimal neural network structure based on the PMDL principle
686
Modeling of Speed in Vehicles Entering Two-Way Suburban Tunnels by Adaptive Neuro Fuzzy Inference System
687
Modeling of spherulitic crystallization in thermoplastic tow-placement process: heat transfer analysis
688
Modeling of spherulitic crystallization in thermoplastic tow-placement process: spherulitic microstructure evolution
689
Modeling of spiral wound pervaporation modules with application to the separation of styrene/ethylbenzene mixtures
690
Modeling of splat particle splashing data during thermal spraying with the Burr distribution
691
Modeling of sporicidal effect of hydrogen peroxide in the sterilization of low density polyethylene film inoculated with Bacillus subtilis spores
692
Modeling of spraying with time-dependent material feed rate
693
Modeling of spring-back in V-die bending process by using fuzzy learning back-propagation algorithm
694
Modeling of springback, strain rate and Bauschinger effects for two-dimensional steady state cyclic flow of sheet metal subjected to bending under tension
695
Modeling of springback, strain rate and Bauschinger effects for two-dimensional steady state cyclic flow of sheet metal subjected to bending under tension
696
Modeling of sputtering erosion/redeposition—status and implications for fusion design
697
Modeling of stability constants of mono-complexes of La3+, Ce3+, Pr3+, and Nd3+ with carboxylic acids in water–dioxane solutions by using connectivity index 3χv
698
Modeling of stability of the condensing interface in a capillary pumped loop
699
Modeling of starch retrogradation onset in its aqueous solution using thermoreversible gelation concept
700
Modeling of Start-Up and Shut-Down Power Trajectories of Thermal Units
701
Modeling of static concentrator modules incorporating lambertian or v-groove rear reflectors
702
Modeling of Static VAR’s Compensators in Fast Decoupled Load Flow.
703
Modeling of steam plasma gasification for municipal solid waste
704
Modeling of Steam-Clad Interactions Under Severe Accident Conditions in Nuclear Power Light Water Reactors
705
Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams
706
Modeling of steel frame structures in fire using OpenSees
707
Modeling of steel microstructure evolution during thermo-mechanical rolling of plate for conveying pipes
708
Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy
709
Modeling of stiffness of FRP composites under elevated and high temperatures
710
Modeling of stochastic properties of fast cracks in quasi-brittle materials
711
Modeling of strain hardening and creep behaviour of 2024T3 aluminium alloy at room and high temperatures
712
Modeling of strain rate effects for concrete with viscoelasticity and retarded damage
713
Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels Original Research Article
714
Modeling of stratigraphic architectural patterns in extensional settings—towards a conceptual model
715
Modeling of stream–aquifer interaction: the embedded multireservoir model
716
Modeling of streamflow- suspended sediment load relationship by adaptive neuro-fuzzy and artificial neural network approaches (Case study: Dalaki River, Iran)
717
Modeling of streaming and elastic flow integration in OFDMA-based IEEE802.16 WiMAX
718
Modeling of Stress Changes at Mayon Volcano, Philippines
719
Modeling of Stress Distribution During Strip Coiling Process Original Research Article
720
Modeling of stress induced nitrogen diffusion in nitrided stainless steel
721
Modeling of stress–strain curves for Pd40Ni10Cu30P20 glass alloy under constant strain-rate deformation
722
Modeling of stress–strain curves for Pd40Ni10Cu30P20 glass alloy under constant strain-rate deformation
723
Modeling of Strip Heating Process in Vertical Continuous Annealing Furnace Original Research Article
724
Modeling of Strip Temperature in Rapid Cooling Section of Vertical Continuous Annealing Furnace Original Research Article
725
Modeling of structural coupling for assessment of modal properties of twin tall buildings with a skybridge
726
Modeling of structure–mutagenicity relationships: counter propagation neural network approach using calculated structural descriptors
727
Modeling of structure–mutagenicity relationships: counter propagation neural network approach using calculated structural descriptors Original Research Article
728
Modeling of Structures in the Mechanics of Composites
729
Modeling of structures subjected to impact: concrete behaviour under high strain rate
730
Modeling of subduction components in the Genesis of the Meso-Cenozoic igneous rocks from the South Shetland Arc, Antarctica
731
Modeling of sub-ionospheric VLF signal perturbations associated with total solar eclipse, 2009 in Indian subcontinent Original Research Article
732
Modeling of submerged membrane bioreactor process for wastewater treatment Original Research Article
733
Modeling of substrate degradation and oxygen consumption in waste composting processes
734
MODELING OF SUBSTRATE NOISE IMPACT ON A SINGLE-ENDED CASCODE LNA IN A LIGHTLY DOPED SUBSTRATE
735
Modeling of suction distributions in an unsaturated heterogeneous residual soil slope
736
Modeling of sudden hydrogen expansion from cryogenic pressure vessel failure
737
Modeling of Suitability Iranian Oak site for establish of coppice regeneration in Zagros forest
738
Modeling of Suitability Iranian Oak site for establish of coppice regeneration in Zagros forest
739
Modeling of Suitability Iranian Oak site for establishing of coppice regeneration in Zagros forest
740
Modeling of sulfate reduction in anaerobic solid substrate bioreactors for mine drainage treatment
741
Modeling of sulfur dioxide emissions in Ahvaz City , southwest of Iran during 2013
742
Modeling of sulfur gases and chemiions in aircraft engines
743
Modeling of sulfur plugging in a sour gas reservoir
744
Modeling of sulphonation of tridecylbenzene in a falling film reactor
745
Modeling of supercritical fluid flow through a yarn package
746
Modeling Of Superheated Steam Drying Of Wood Particles
747
Modeling of supersonic plasma flow in the scrape-off layer
748
Modeling of Supply Chain for Defective Goods Using Jit-Logistics
749
Modeling of surface and bulk effects in thin-film Pd cathodes with high proton loading
750
Modeling of surface cracks in rolling contact
751
Modeling of surface finish in electro-discharge machining based upon statistical multi-parameter analysis
752
Modeling of Surface Generation in Contour Grinding of Optical Molds
753
Modeling of surface reaction in tritium release from lithium ceramics and its comparison with transient experiments
754
Modeling of surface reactions on carbonaceous atmospheric particles during a wood smoke episode in Houston, Texas
755
Modeling of surface roughening induced by laser ablation
756
Modeling of surface roughness in precision machining of metal matrix composites using ANN
757
Modeling of Surface Runoff in Xitiaoxi Catchment, China
758
Modeling of Surface-mounted Permanent Magnet Synchronous Motors with Inner and Outer Rotor Types
759
Modeling of swift heavy ions interaction with dense matter
760
Modeling of swift heavy ions interaction with dense matter
761
Modeling of swift heavy ions interaction with dense matter
762
Modeling of synchronous machines with magnetic saturation
763
Modeling of synergistic effects in flame inhibition by 2-H heptafluoropropane blended with sodium bicarbonate
764
Modeling of synthesis gas and hydrogen production in a thermally coupling of steam and tri-reforming of methane with membranes
765
Modeling of system dynamics of a slewing flexible beam with moving payload pendulum
766
Modeling of system reliability Petri nets with aging tokens
767
Modeling of system reliability Petri nets with aging tokens
768
Modeling of TABS-based thermally manageable buildings in Simulink
769
Modeling of tacit knowledge in industry: Simulations on the variables of industrial processes
770
Modeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis
771
Modeling of Taylor bubble rising in a vertical mini noncircular channel filled with a stagnant liquid
772
Modeling of Tehran South Water Treatment Plant Using Neural Network and Fuzzy Logic Considering Effluent and Sludge Parameters
773
Modeling of Temperature Dependency of Silicon Nitride Formation’s Kinetics during Reaction Bonded Method
774
Modeling of temperature distribution in ultrasonic welding of thermoplastics for various joint designs
775
Modeling of temperature distributions in canned tomato based dip during industrial pasteurization Original Research Article
776
Modeling of temperature field and grain growth of a dual phase steel DP980 in direct diode laser heat treatment
777
Modeling of temperature fields in the graphite target at pulsed laser deposition of CNx films
778
Modeling of temperature gradients in packed-bed solid-state bioreactors
779
Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics
780
Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics
781
Modeling of temperature sensor built on GaN nanostructures
782
Modeling of temporal variations of vertical concentration profile of 7Be in the atmosphere
783
Modeling of tensile strength on moist granular earth material at low water content
784
Modeling of tension modulation nonlinearity in plucked strings
785
Modeling of ternary element site substitution in NiAl
786
Modeling of ternary solubilities of organics in supercritical carbon dioxide
787
Modeling of ternary solubilities of solids in supercritical carbon dioxide in the presence of cosolvents or cosolutes
788
Modeling of terrain impact caused by tracked vehicles
789
Modeling of textural anisotropy in granular materials with stochastic micro-polar hypoplasticity
790
Modeling of textural changes during drying of potato slices Original Research Article
791
Modeling of texture evolution in the deformation zone of second-phase particles Original Research Article
792
Modeling of textured aluminum alloys used in a bumper system: Material tests and characterization
793
Modeling of TG curves of isothermal oxidation of graphite
794
Modeling of the [E43S]SNase-ssDNA–Cd2+ complex: Structural insight into the action of nuclease on ssDNA
795
Modeling of the ‘hydration shell’ of uracil and thymine in small water clusters by DFT and MP2 methods
796
Modeling of the 2001 lava flow at Etna volcano by a Cellular Automata approach
797
Modeling of the AC arc discharge on ice surfaces
798
Modeling of the adsorption kinetics of Basic Red 46 on single-walled carbon nanotube and carboxylate group functionalized single-walled carbon nanotube
799
Modeling of the Amino Acid Side Chain Effects on Peptide Conformation
800
Modeling of the angle of shearing resistance of soils using soft computing systems
801
Modeling of the anisotropic elastic properties of plasma-sprayed coatings in relation to their microstructure Original Research Article
802
Modeling of the appliance, lighting, and space-cooling energy consumptions in the residential sector using neural networks
803
Modeling of the APS plasma spray process using artificial neural networks: basis, requirements and an example
804
Modeling of the asymmetric low-cycle loading in the space of stresses
805
Modeling of the atomic structure and electronic properties of amorphous GaN1−xAsx
806
Modeling of the Behavior of Concrete Tension Members Reinforced with FRP Rods
807
Modeling of the Behavior of Expansive Soils
808
Modeling of the beryllia ceramics formation process
809
Modeling of the Binding Mode of a Non-covalent Inhibitor of the 20S Proteasome. Application to Structure-Based Analogue Design
810
Modeling of the Binding of Peptide Blockers to Voltage-Gated Potassium Channels: Approaches and Evidence
811
Modeling of the biodynamic responses distributed at the fingers and palm of the hand in three orthogonal directions
812
Modeling of the b-SiC 001/ 3=2/ surface reconstruction
813
Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model I. Model examination and apparent reaction rate constants
814
Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency
815
Modeling of the bulk versus SOI CMOS performances for the optimal design of APS circuits in low-power low-voltage applications
816
Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch
817
Modeling of the carbon dioxide capture process system using machine intelligence approaches
818
Modeling of the carbon dioxide capture process system using machine intelligence approaches
819
Modeling of the carbon-rich c(4 × 4) reconstruction on Si(1 0 0)
820
Modeling of the carburizing and nitriding processes
821
Modeling of the catalytic properties of high-temperature surface insulation in a dissociated carbon dioxide — Nitrogen mixture
822
Modeling of the charge acceptance of lead–acid batteries
823
Modeling of the charge and discharge processes in energy storage cells
824
Modeling of the charging characteristic of linear-type superconducting power supply using granular-based radial basis function neural networks
825
Modeling of the charging dynamics in silicon nanocrystal nonvolatile flash memory cells
826
Modeling of the chemical-looping combustion of methane using a Cu-based oxygen-carrier
827
Modeling of the classification behavior of the diaphragms used in multi-chamber cement mills
828
Modeling of the cloud and radiation processes observed during SHEBA
829
Modeling of the CO2 Separation Process from Acid Gas Feed into the Sulfur Recovery Unit of Asaluyeh Phase 1 Using Membrane
830
Modeling of the condensation sink term in an interfacial area transport equation
831
Modeling of the conduction in a WO3 thin film as ozone sensor
832
Modeling of the connection road surface microtexture/water depth/friction
833
Modeling of the Contact–Adsorption–Regeneration (CAR) activated sludge process
834
Modeling of the daily rainfall-runoff relationship with artificial neural network
835
Modeling of the deactivation kinetics for the combustion of ethyl acetate and benzene present in the air stream over ZSM-5 catalyst loaded with chromium
836
Modeling of the defaultable term structure: conditionally Markov approach
837
MODELING OF THE DEFORMATION OF THE TERRAIN FOR InSAR PROJECT
838
Modeling of the deposition of Ni and Pd on Mo(1 1 0)
839
Modeling of the devolatilization kinetics during pyrolysis of grape residues
840
Modeling of the Dissolution Kinetics of Arbutus Wild Berries-Based Tablets as Evaluated by Electric Conductivity
841
Modeling of the dynamic adsorption of an anionic dye through ion-exchange membrane adsorber
842
Modeling of the dynamic delamination of L-shaped unidirectional laminated composites
843
Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation
844
Modeling of the dynamic wetting behavior in a capillary tube considering the macroscopic–microscopic contact angle relation and generalized Navier boundary condition
845
Modeling of the dynamics of a slug of liquid oxygen in a magnetic field and experimental verification Original Research Article
846
Modeling of the dynamics of metal deposition inside a flow-through porous electrode with low initial conductivity
847
Modeling of the dynamics of tendon-driven robotic mechanisms with flexible tendons
848
Modeling of the Earth’s rotation variations using a novel approach inspired by the brain emotional learning
849
Modeling of the effect of Al2O3 interlayer on residual stress due to oxide scale in thermal barrier coatings
850
Modeling of the effect of cavitation on tensile failure of superplastic alloys
851
Modeling of the effect of coping with stress styles on GAD by brain’s executive functions
852
Modeling of the effect of land use changes on the runoff generation of a river basin through parameter regionalization of a watershed model
853
Modeling of the Effect of MgO and ZrO2 on Sintering of Alumina
854
Modeling of the Effect of Potassium Bicarbonate on Sclerotial Germination of Sclerotinia sclerotiorum in vitro by Multi Regression Analysis
855
Modeling of the effect of the hot-deformation parameters on the strength of Al-base metal–matrix composites by the use of a radial-base function (RBF) network
856
Modeling of the effect of the β phase deformation on the α phase precipitation in near-β titanium alloys Original Research Article
857
Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials
858
Modeling of the Effective Thermal Conductivity of Consolidated Porous Media with Different Saturants: A Test Case of Gabbro Rocks
859
Modeling of the effects of athermal flow strength and activation energy for dislocation glide on the nanoindentation creep of nickel thin film at room temperature
860
Modeling of the effects of length to diameter ratio and nozzle number on the performance of counterflow Ranque–Hilsch vortex tubes using artificial neural networks
861
Modeling of the effects of propagating thrust slip on pore pressures and implications for monitoring
862
Modeling of the efficiency of fibrous filters through numerical simulation and X-ray tomography
863
Modeling of the electrical parameters of a wire-cylinder electrostatic precipitator under pulse energization
864
Modeling of the ElectriCOIL system
865
Modeling of the electromagnetic forming of sheet metals: state-of-the-art and future needs
866
Modeling of the electronic, optoelectronics, photonic and thermodynamics properties of 1,4-bis(3-carboxyl-3-oxo-prop-1-enyl) benzene molecule
867
Modeling of the energy demand of the residential sector in the United States using regression models and artificial neural networks
868
Modeling of the equilibrium moisture content (EMC) of Miscanthus (Miscanthus × giganteus)
869
Modeling of the expansion of laser-evaporated matter in argon, helium and nitrogen and the condensation of clusters
870
Modeling of the extraction of uranium (VI) from concentrated phosphoric acid by synergistic mixtures of bis-(2-ethylhexyl)-phosphoric acid and tri-n-octylphosphine oxide
871
Modeling of the field emitter triode (FET) as a displacement/pressure sensor
872
Modeling of the field features of the SR factory magnetic elements
873
Modeling of the field features of the SR factory magnetic elements
874
Modeling of the Fischer–Tropsch synthesis in slurry bubble column reactors
875
MODELING OF THE FLIGHT OF A HIGH-SPEED ELASTIC MISSILE WITH LATTICED CONTROL SURFACES
876
MODELING OF THE FLIGHT OF A HIGH-SPEED ELASTIC MISSILE WITH LATTICED CONTROL SURFACES
877
Modeling of the fluctuating component in the form of the sum of an infinite number of random quantities. Part 1: k–ε Modeling
878
Modeling of the fluctuating component in the form of the sum of an infinite number of random quantities. Part 2. Model of transfer of turbulent stresses and turbulent heat fluxes
879
Modeling of the fluid structure interaction of a human trachea under different ventilation conditions
880
Modeling of the fracture of a coating under sliding indentation
881
Modeling of the Free-Radical Copolymerization Kinetics with Cross Linking of Vinyl/Divinyl Monomers in Supercritical Carbon Dioxide
882
Modeling of the frequency- and temperature-dependent absorption coefficient of long-wave-infrared (2-25 (mu)m) transmitting materials
883
Modeling of the friction caused by lubrication and surface roughness in sheet metal forming
884
Modeling of the gaseous diffusion coefficient in the presence of NAPL
885
Modeling of the gaseous diffusion coefficient through unsaturated soil systems
886
Modeling of the gas–particle flow in industrial classification chambers for design optimization
887
Modeling of the GELINA neutron target using coupled electron–photon–neutron transport with the MCNP4C3 code
888
Modeling of the GELINA neutron target using coupled electron–photon–neutron transport with the MCNP4C3 code
889
Modeling of the generalized unified power flow controller (GUPFC) in a nonlinear interior point OPF
890
Modeling of the Genetic Switch of Bacteriophage TP901-1: A Heteromer of CI and MOR Ensures Robust Bistability
891
Modeling of the glottal flow derivative waveform with application to speaker identification
892
Modeling of the grain boundary segregation of helium in α-Fe
893
Modeling of the green body drying step to obtain large size transparent magnesium-aluminate spinel samples
894
Modeling of the ground plane in electrostatic BEM analysis of MEMS and NEMS
895
Modeling of the grounding resistance variation using ARMA models
896
Modeling of the Guagua Pichincha volcano (Ecuador) lahars
897
Modeling of the heat transfer and flow features of the thermal plasma reactor with counter-flow gas injection
898
Modeling of the heat transfer in a portable PEFC system within MATLAB-Simulink
899
Modeling of the heat transfer in laser-heated small particles on surfaces
900
Modeling of the heat transfer performance of plate-type dispersion nuclear fuel elements
901
Modeling of the HESCO nozzle diffuser used in IEA Annex-20 experiment test room
902
Modeling of the high temperature behaviour of IN792 in gas turbine hot parts
903
Modeling of the high temperature flow behavior of stabilized 12–27 wt% Cr ferritic stainless steels
904
Modeling of the hot flow behavior of advanced ultra-high strength steels (A-UHSS) microalloyed with boron
905
Modeling of the Hydrocracking Reactor by the CESE Method
906
Modeling of the Hydrodesulfurization process of natural gas condensates
907
Modeling of the hydrodynamics of the fully developed region in a downer reactor
908
Modeling of the impact of dolomite and biotite dissolution on vermiculite composition in a gneissic shallow aquifer of the Sila Massif (Calabria, Italy)
909
Modeling of the induced chemo-mechanical stress through porous cement mortar subjected to CO2: Enhanced micro-dilatation theory and 14C-PMMA method
910
Modeling of the influence of coarsening on viscoplastic behavior of a 319 foundry aluminum alloy
911
Modeling of the influence of fibers on creep of fiber reinforced cementitious composite
912
Modeling of the influence of fibers on creep of fiber reinforced cementitious composite
913
Modeling of the influence of H2O on metal oxide sensor responses to CO
914
Modeling of the influence of parasitic coupling between a component and its feeding line on scattering parameters
915
Modeling of the influence of the self noise on the array gain of a sonar system
916
Modeling of the influence of transverse cracking on chloride penetration into concrete
917
Modeling of the Inhibition Mechanism of Acrylic Acid Polymerization
918
Modeling of the initial deposition of individual particles during the cross-flow membrane filtration
919
Modeling of the initial stage in vibratory cavitation erosion tests by use of a Weibull distribution
920
Modeling of the inlet zone in the mixed lubrication situation of cold strip rolling
921
Modeling of the interface behavior in tape casting of functionally graded ceramics for magnetic refrigeration parts
922
Modeling of the interfacial shear in the 3D momentum equations of TRAC-BF1
923
Modeling of the inter-granular energy-barrier height in very-fine nanograins through a semi-classical approach
924
Modeling of the intermolecular Force-Induced Adhesion in Freestanding Nanostructures Made of Nano-beams
925
Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing
926
Modeling of the Interphase of Polymer-Matrix Composites: Determination of Its Structure and Mechanical Properties
927
Modeling of the I–V curves of the PV modules using linear interpolation/extrapolation
928
Modeling of the Josephson fluxonic diode
929
Modeling of the kinetics of the heterogeneous-homogeneous conversion of methane into ethane and ethylene in the absence of oxygen in the gas phase
930
Modeling of the knee joint load in rehabilitative knee extension exercises under water
931
Modeling of the link between microstructure and effective diffusivity of cement pastes using a simplified composite model
932
Modeling of the long-range interstitial migration of ion implanted boron
933
Modeling of the long-term effect of tree species (Norway spruce and European beech) on soil acidification in the Ore Mountains
934
Modeling of the long-term effect of tree species (Norway spruce and European beech) on soil acidification in the Ore Mountains
935
Modeling of the long-term tropospheric trends of hydroxyl radical for the Northern Hemisphere
936
Modeling of the loss and mode coupling due to an irregular core-cladding interface in step-index plastic optical fibers
937
Modeling of the Lyman (gamma) satellites in FUSE spectra of DA white dwarfs
938
Modeling of the magnetosphere of Mercury at the time of the first MESSENGER flyby
939
Modeling of the Malaysian Crude Oil System
940
Modeling of the marine circulations and contamination by wastewater in the Nador lagoon
941
Modeling of the Mass Spectrometric Response Factors in Non-target Analysis
942
Modeling of the mass transfer and conduction behavior in electro-electrodialysis with oil/water emulsion as the catholyte
943
Modeling of the Maximum Entropy Problem as an Optimal Control Problem and its Application to Pdf Estimation of Electricity Price
944
Modeling of the mean Poincaré map on a class of random impact oscillators
945
Modeling of the mechanical behavior of HA/PEEK biocomposite under quasi-static tensile load
946
Modeling of the mechanical behavior of HA/PEEK biocomposite under quasi-static tensile load
947
Modeling of the mechanical behavior of HA/PEEK biocomposite under quasi-static tensile load
948
Modeling of the mechanical instability of carbon nanotubes Original Research Article
949
Modeling of the mechanical properties of nanoparticle/polymer composites
950
Modeling of the MEMS Reactive Ion Etching Process Using Neural Networks
951
Modeling of the metal powder compaction process using the cap model. Part I. Experimental material characterization and validation
952
Modeling of the metal powder compaction process using the cap model. Part II: Numerical implementation and practical applications
953
Modeling of the Metalorganic Chemical Vapor Deposition of Tantalum Oxide from Tantalum Ethoxide and Oxygen
954
Modeling of the methane reforming reaction in hydrogen selective membrane reactors
955
Modeling of the microconvective contribution to wall heat transfer in subcooled boiling flow
956
Modeling of the Microstructure Evolution in Continuously Cast A1-Pb Alloys
957
Modeling of the microstructure variables in the isothermal compression of TC11 alloy using fuzzy neural networks
958
Modeling of the mixed potential in hydrogen peroxide-based fuel cells
959
Modeling of the modern houses of Cyprus and energy consumption analysis
960
Modeling of the molar mass distribution of six-arm star-branched poly-ε-caprolactam using size-exclusion chromatography
961
Modeling of the monotonic and cyclic Swift effects using an isotropic, finite viscoplasticity theory based on overstress (FVBO)
962
Modeling of the Motion of Particles of Arbitrary Density in a Turbulent Flow on the Basis of a Kinetic Equation for the Probability Density Function
963
Modeling of the neighborhood topological effect on grain growth in presence of particles pinning
964
Modeling of the nominal operating cell temperature based on outdoor weathering
965
Modeling of the non-adiabatic E0+g→D0+u transitions induced by Ar in molecular iodine: a first attempt
966
Modeling of the non-equilibrium effects by high electric fields in small semiconductor devices
967
MODELING OF THE NONLINEAR DYNAMIC BEHAVIOR OF REINFORCED SLOPES IN SANDY SOILS
968
Modeling of the Nonlinear Response of the Intrinsic HgCdTe Photoconductor by a Two-Level Rate Equation with a Finite Number of Carriers Available for Photoexcitation
969
Modeling of the nonlinear sequences based on the modified Genetic Algorithm Original Research Article
970
Modeling of the non-monotonous viscoplastic behavior of uranium dioxide
971
Modeling of the nuclear parameters for H atoms in X-ray charge-density studies
972
Modeling of the optimum level of financial provision of Ukrainian enterprises’ innovative activities
973
Modeling of the optimum tilt of a solar chimney for maximum air flow
974
Modeling of the outer heliosphere with the realistic solar cycle Original Research Article
975
Modeling of the oxidation of methyl esters—Validation for methyl hexanoate, methyl heptanoate, and methyl decanoate in a jet-stirred reactor
976
Modeling of the oxy-combustion calciner in the post-combustion calcium looping process
977
Modeling of the parametric dependence of the edge toroidal rotation for MAST and ASDEX Upgrade
978
Modeling of the Parenchymous Vascularization and Perfusion
979
Modeling of the partitioning and phase transformation temperatures of an as-cast third generation single crystal Ni-base superalloy
980
Modeling of the partitioning and phase transformation temperatures of an as-cast third generation single crystal Ni-base superalloy
981
Modeling of the pellet cloud structure in the presence of ∇B induced drift
982
Modeling of the performance of BSCF capillary membranes in four-end and three-end integration mode
983
Modeling of the performance reduction of Macro Fiber Composites for use in numerical forming simulation of piezoceramic-metal-compounds
984
Modeling of the permeate flux decline during MF and UF cross-flow filtration of soy sauce lees
985
Modeling of the permeation swelling of emulsion during lactic acid extraction by liquid surfactant membranes
986
Modeling of the phase lag causing fluidelastic instability in a parallel triangular tube array
987
Modeling of the phase transformations in near-β titanium alloys during the cooling after forging
988
Modeling of the photophysical properties of α-sexithiophene thin films
989
Modeling of the pH-sensitive behavior of an ionic gel in the presence of diffusion
990
Modeling of the plasma extraction efficiency of an inductively coupled plasma-mass spectrometer interface using the direct simulation Monte Carlo method
991
Modeling of the plastic deformation of nanostructured materials with grain size gradient
992
Modeling of the power cable production line
993
Modeling of the Pressure-Density Relationship in a Large Cubic Baler
994
Modeling of the processes of monotonic deformation of simple materials with elastoplastic behavior
995
Modeling of the production of secondary gaseous products in confined atmospheres
996
Modeling of the production of ultra fine Aluminium particles in rapid quenching turbulent flow
997
Modeling of the programming window distribution in multinanocrystals memories
998
Modeling of the programming window distribution in multinanocrystals memories
999
Modeling of the progressive failure behavior of multilayer knitted fabric-reinforced composite laminates
1000
Modeling of the propagation of a pressure wave during the condensation process of R134a refrigerant in a pipe minichannel under the periodic conditions of hydrodynamic disturbances
