Title List مقالات لاتين Triangularizability of operators with increasing spectrum Tribological, anti-corrosive properties and biocompatibility of the micro- and nano-crystalline diamond coated Ti6Al4V

بر اساس عنوان

1

Triangularizability of operators with increasing spectrum

2

Triangularizable semigroups of matrices

3

Triangularization over finite-dimensional division rings using the reduced trace

4

Triangular-lattice Heisenberg anti-ferromagnets: A Schwinger-boson study

5

Triangular-norm-based addition of fuzzy intervals

6

Triangular-shaped reaction fronts in a catalytic surface reaction

7

Triangulated 3-polytopes without faces of low weight

8

Triangulated neighborhoods in even-hole-free graphs Original Research Article

9

Triangulating a Surface with a Prescribed Graph

10

Triangulating Debates Within the Field: Teaching International Relations Research Methodology

11

Triangulating graphs with few P4ʹs Original Research Article

12

Triangulating graphs without asteroidal triples

13

Triangulating multitolerance graphs Original Research Article

14

Triangulating Planar Graphs While Minimizing the Maximum Degree

15

Triangulating the surface of a molecule Original Research Article

16

Triangulation as a basis for knowledge discovery in software engineering

17

Triangulation between case study and survey methods in management accounting research: An assessment of validity implications

18

Triangulation in qualitative tourism research

19

Triangulation method as a valid tool to locate the damage in unidirectional CFRP laminates

20

Triangulation of 3D surfaces reconstructed by interpolating subdivision

21

Triangulation of arbitrary polyhedra to support automatic mesh generators

22

Triangulation of Bayesian networks with recursive estimation of distribution algorithms Original Research Article

23

Triangulation of generative form for parametric design and rapid prototyping

24

Triangulation-based fusion of sonar data with application in robot pose tracking

25

Triangulations and a generalization of Boseʹs method Original Research Article

26

Triangulations of 3-way regular tripartite graphs of degree 4, with applications to orthogonal latin squares Original Research Article

27

Triangulations of orientable surfaces by complete tripartite graphs

28

Triangulations on closed surfaces which quadrangulate other surfaces II Original Research Article

29

Triangulations Original Research Article

30

Triangulations without minimum-weight drawing

31

Triangulation-to-GPS and GPS-to-GPS geodesy in Trinidad, West Indies: Neotectonics, seismic risk, and geologic implications

32

TRIANGULATOR: Excel spreadsheets for converting relative bearings to XYZ coordinates, with applications to scaling photographs and orienting surfaces

33

Triangulo-pentahalotrimetal complexes of nickel(II) and cobalt(II) with N,N,N′,N′,N-tetramethylethane-1,2-diamine and related compounds

34

Triaryl bis-sulfones as a new class of cannabinoid CB2 receptor inhibitors: identification of a lead and initial SAR studies

35

Triaryl bis-sulfones as cannabinoid-2 receptor ligands: SAR studies

36

Triaryl linked donor acceptor dyads for high-performance dye-sensitized solar cells

37

Triaryl methane derivatives as antiproliferative agents

38

Triaryl phosphine-functionalized N-heterocyclic carbene ligands for Heck reaction

39

Triarylamines connected via phenylenevinylene segments

40

Triarylaminium salt facilitated Friedel–Crafts reaction of indoles with enamides and vinyl ethers

41

Triarylantimony dicarboxylates as pseudo-halides for palladium-catalyzed cross-coupling reaction with arylboronic acids and triarylbismuthanes without any base

42

Triarylborane-functionalized polynorbornenes: Direct polymerization and signal amplification in fluoride sensing

43

Triarylcarbinol functionalized gold nanoparticles for the colorimetric detection of nerve agent simulants

44

Triarylethylene bisphenols with a novel cycle are ligands for the estrogen receptor Original Research Article

45

Triarylimidazoles as potent antiwear agents: Eco-friendly synthesis and materialistic approach

46

Triarylpyrazoles with basic side chains: development of pyrazole-based estrogen receptor antagonists Original Research Article

47

Triarylpyrylium salts: dynamics of the monomer–dimer equilibrium via a triplet absorption study

48

Triassic ‘Ghost’ Stratigraphy of Shallow-Marine Sediments of the Mino Terrane Reconstructed from Cave Deposits in Permian Limestone and Clastic Rocks in Triassic Deep-Marine Chert

49

Triassic “adakitic” rocks in an extensional setting (North China): Melts from the cratonic lower crust

50

Triassic alkaline magmatism of the Hawasina Nappes: Post-breakup melting of the Oman lithospheric mantle modified by the Permian Neotethyan Plume

51

Triassic alluvial braidplain and braided river deposits of the La Ternera Formation, Atacama region, northern Chile

52

Triassic blueschists and eclogites from northwest Turkey: vestiges of the Paleo-Tethyan subduction

53

Triassic climates — State of the art and perspectives

54

Triassic collision in the Paleo-Tethys Ocean constrained by volcanic activity in SW China

55

Triassic collision of western Tianshan orogenic belt, China: Evidence from SHRIMP U–Pb dating of zircon from HP/UHP eclogitic rocks

56

Triassic correlation of the Southeast Asian mainland

57

Triassic eclogites from central Qiangtang, northern Tibet, China: Petrology, geochronology and metamorphic P–T path

58

Triassic granitoids in the eastern Songpan Ganzi Fold Belt, SW China: Magmatic response to geodynamics of the deep lithosphere

59

Triassic granitoids of the Qinling orogen, central China: Genetic relationship of enclaves and rapakivi-textured rocks

60

Triassic high-pressure metamorphism in the Huwan shear zone: Tracking the initial subduction of continental crust in the whole Dabie orogen

61

Triassic high-strain shear zones in Hainan Island (South China) and their implications on the amalgamation of the Indochina and South China Blocks: Kinematic and 40Ar/39Ar geochronological constraints

62

Triassic magnetic overprints related to albitization in granites from the Morvan massif (France)

63

Triassic marine biogeography constrains the palaeogeographic reconstruction of Tibet and adjacent areas

64

Triassic metamorphism in the northern part of the Tahamي Terrane of the central cordillera of Colombia

65

Triassic mineralization with Cretaceous overprint in the Dahu Au–Mo deposit, Xiaoqinling gold province: Constraints from SHRIMP monazite U–Th–Pb geochronology

66

Triassic Nb-enriched basalts, magnesian andesites, and adakites of the Qiangtang terrane (Central Tibet): evidence for metasomatism by slab-derived melts in the mantle wedge

67

Triassic palaeogeography of Tunisia

68

Triassic paleomagnetic data from south China and their bearing on the tectonic evolution of the western circum-Pacific region

69

Triassic paragonite- and garnet-bearing epidote-amphibolite from the Hida Mountains, Japan

70

Triassic pelagic deposits of Timor: palaeogeographic and sea-level implications

71

Triassic platform-margin deltas in the western Barents Sea

72

Triassic redbeds in the Malaguide Complex (Betic Cordillera — Spain): Petrography, geochemistry and geodynamic implications

73

Triassic rift-related komatiite, picrite and basalt, Pelagonian continental margin, Greece

74

Triassic river systems and the paleo-Pacific margin of northwestern Pangea

75

Triassic seismic sequence stratigraphy and paleogeography of the western Barents Sea area

76

Triassic stratigraphy, facies and evolution of the Arabian shelf in the northern United Arab Emirates

77

Triassic synthems of southern South America (southwestern Gondwana) and the Western Caucasus (the northern Neotethys), and global tracing of their boundaries

78

Triassic three-stage collision in the Paleo-Tethys: Constraints from magmatism in the Jiangda–Deqen–Weixi continental margin arc, SW China

79

Triassic to Middle Jurassic stratigraphy of the Kerr McGee 97/12-1 exploration well, offshore southern England

80

Triassic–early Liassic extensional systems and their Tertiary inversion, Essaouira Basin (Morocco)

81

Triassic–Jurassic boundary events inferred from integrated stratigraphy of the Csővár section, Hungary

82

Triassic–Jurassic boundary events: Problems, progress, possibilities

83

Triassic–Jurassic development of the St. George’s Channel basin, offshore Wales, UK

84

Triassic–Jurassic organic carbon isotope stratigraphy of key sections in the western Tethys realm (Austria)

85

Triatoma infestans can be captured under natural climatic conditions using yeast-baited traps

86

Triatomic states in ultracold gases Original Research Article

87

Triatominae–Trypanosoma cruzi/T. rangeli: Vector–parasite interactions

88

Triatomine Fauna and Recent Epidemiological Dynamics of Chagas Disease in an Endemic Area of Northeast Brazil

89

Triaxial Apparatus for Applying Liquid Infiltration with Controlled Boundary Conditions and Internal Suction Measurement

90

Triaxial Behavior of Kaolinite in Different Pore Fluids

91

Triaxial behavior of sand–mica mixtures using genetic programming

92

Triaxial behaviour of a cemented gravely sand, Tehran alluvium

93

Triaxial behaviour of concrete under high stresses: Influence of the loading path on compaction and limit states

94

Triaxial characterisation of iron powder behaviour

95

Triaxial characterisation of iron powder behaviour

96

Triaxial compression deformation for artificial frozen clay with thermal gradient

97

Triaxial compression of aluminium foams

98

Triaxial Compression of Sand Reinforced with Fibers

99

Triaxial compressive strength of air-entrained concrete after freeze–thaw cycles

100

Triaxial Creep Behavior of Red Sandstone in Freeze-Thaw Environments

101

Triaxial Determination of Shear Strength of Tire Chips-Sand-Geotextile Mixtures

102

Triaxial ellipsoid dimensions and poles of asteroids from AO observations at the Keck-II telescope

103

Triaxial ellipsoid dimensions and rotational poles of seven asteroids from Lick Observatory adaptive optics images, and of Ceres

104

Triaxial Ellipsoidal Quantum Billiards

105

Tri-axial forces at the seat and backrest during whole-body fore-and-aft vibration

106

Tri-axial forces at the seat and backrest during whole-body vertical vibration

107

Triaxial mechanical behaviour of mortar: Effects of drying

108

Triaxial nuclear shapes in odd-Ta nuclei? Original Research Article

109

Tri-axial sensors and actuators made of a single piezoelectric cylindrical shell

110

Triaxial shear behavior of a cement-treated sand–gravel mixture

111

Triaxial strength and failure criterion of plain high-strength and high-performance concrete before and after high temperatures

112

Triaxial stress state deep in orogenic belts: an example from Turkey

113

Triaxial superdeformation in 163Lu Original Research Article

114

Triaxial superdeformed bands in 164Lu and enhanced E1 decay-out strength

115

Triaxial superdeformed bands in odd–odd image isotopes

116

Triaxial T–C–C behavior of air-entrained concrete after freeze–thaw cycles

117

Triaxial Tests of Fiber-Reinforced Concrete

118

Triaxial-in-a-plane soil stress gage for vehicle mobility applications

119

Triaxiality - recent progress in mass 160 region Original Research Article

120

Triaxiality dependent cohesive zone model

121

Triaxiality Factor and Lode Angle Effects on Failure of X-100 Steel Considering Plastic Anisotropy

122

Triaxiality in 48Cr

123

Triaxiality in the interacting boson model Original Research Article

124

Triazamacrocyclic complexes with 8- and 9-membered chelate rings. Preparation, structures and agostic interactions in complexes of 1,5,9-triazacyclotetradecane and 1,5,9-triazacyclopentadecane

125

Triazene 1-oxide compounds: Synthesis, characterization and evaluation as fluorescence sensor for biological applications

126

Triazene drug metabolites. Part 17: synthesis and plasma hydrolysis of acyloxymethyl carbamate derivatives of antitumour triazenes Original Research Article

127

Triazene formation via reaction of imidazol-2-ylidenes with azides

128

Triazidation of 2,4,6-trifluorobenzenes

129

Triazine dendrimers as drug delivery systems: From synthesis to therapy

130

Triazine dyes as photosensitizers for dye-sensitized solar cells

131

Triazine herbicide concentrations in the German Wadden Sea

132

Triazine residues in raw milk and infant formulas from Spanish northwest, by a diphasic dialysis extraction

133

Triazine retention by nanofiltration in the presence of organic matter: The role of humic substance characteristics

134

Triazine-based Dendrimers as Liquid Crystals: Synthesis and Characterization.

135

Triazine–human serum albumin association: thermodynamic approach and sodium effect

136

Triazines in the aquatic systems of the Eastern Chinese Rivers Liao-He and Yangtse

137

Triazinic herbicide determination by gas chromatography–mass spectrometry in breast milk

138

Triazolam-induced amnesia and the word-frequency effect in recognition memory: Support for a dual process account

139

Triazole- and azo-coupled calix[4]arene as a highly sensitive chromogenic sensor for Ca2+ and Pb2+ ions

140

Triazole and triazole derivatives as proton transport facilitators in polymer electrolyte membrane fuel cells

141

Triazole based cadmium(II) anionic framework with 2-dimensional helical channels: Ionic liquid induced synthesis

142

Triazole compounds alters the antioxidant and osmoprotectant status in drought stressed Helianthus annuus L. plants

143

Triazole derivatives as non-nucleoside inhibitors of HIV-1 reverse transcriptase—Structure–activity relationships and crystallographic analysis

144

Triazole functionalized gold nanoparticles for colorimetric Cr3+ sensing

145

Triazole linked lower rim glycosyl appended 1,3-calix[4]arene conjugates: Synthesis, characterization, and their interaction with jacalin Original Research Article

146

Triazole oxytocin antagonists: Identification of aryl ether replacements for a biaryl substituent

147

Triazole-based chromogenic and non-chromogenic receptors for halides

148

Triazole-fused sugars from nitroalkene-containing C-glycosides by a tandem 1,3-dipolar cycloaddition and intramolecular Michael addition

149

Triazolehemiporphyrazines as bridging paths in push–pull phthalocyanines for quadratic nonlinear optics

150

Triazole-linked dendro[60]fullerenes: modular synthesis via a ‘click’ reaction and acidity-dependent self-assembly on the surface

151

Triazolinediones applications and recent advances in click chemistry

152

Triazolines 26: 1-aryl-5-amido-1,2,3-triazolines, a new group of triazoline anticonvulsants. Effect of 5-substitution on anticonvulsant activity

153

Triazolines 31 — anticonvulsant properties of three triazoline — and aziridinedicarboximide derivatives

154

Triazolo[1,5-a]pyrimidines as novel CDK2 inhibitors: Protein structure-guided design and SAR

155

Triazolo[4,3-b]pyridazinones, Cycloaddition, Cytotoxicity, Hep cells

156

Triazoloacridin-6-ones as novel inhibitors of the quinone oxidoreductases NQO1 and NQO2 Original Research Article

157

Triazoloisoquinoline-based dual functional dyestuff for dye-sensitized solar cells

158

Triazolo-linked cinchona alkaloid carbamate anion exchange-type chiral stationary phases: Synthesis by click chemistry and evaluation

159

Triazolopiperazine-amides as dipeptidyl peptidase IV inhibitors: Close analogs of JANUVIA™ (sitagliptin phosphate)

160

Triazolopyridines. Part 24: New polynitrogenated potential helicating ligands

161

Triazolopyridines. Part 25: Synthesis of new chiral ligands from [1,2,3]triazolo[1,5-a]pyridines

162

Triazolopyridines. Part 26: The preparation of novel [1,2,3]triazolo[1,5-a]pyridine sulfoxides

163

Triazolopyridines. Part 28. The ring–chain isomerization strategy: triazolopyridine- and triazoloquinoline–pyridine based fluorescence ligands

164

Triazolo-tetrahydrofluorenones as selective estrogen receptor beta agonists

165

Triazolyl benzothiadiazole fluorescent chemosensors: a systematic investigation of 1,4- or 1,5-disubstituted mono- and bis-triazole derivatives

166

Triazophos residues and dissipation rates in wheat crops and soil

167

Triazophos up-regulated gene expression in the female brown planthopper, Nilaparvata lugens

168

TRIB1 overexpression in acute myeloid leukemia

169

Trib3 is regulated by IL-3 and affects bone marrow-derived mast cell survival and function

170

Tribadism in Zaire

171

Tribal and intergeneric relationships of Mesechiteae (Apocynoideae, Apocynaceae): evidence from three noncoding plastid DNA regions and morphology

172

Tribal boundaries: Stylistic variability and social boundary maintenance during the transition to the Copper Age on the Great Hungarian Plain

173

Tribal Community Visit to Malaria-Endemic Areas Can Pose Risk to Car Nicobar Island: Deterrent for Malaria Elimination

174

Tribal connections health information outreach: results, evaluation, and challenges

175

Tribal delimitation and phylogenetic relationships of Loteae and Coronilleae (Faboideae: Fabaceae) with special reference to Lotus: evidence from nuclear ribosomal ITS sequences

176

Tribal Farm Women’s Participation in Agriculture and Factors Influencing It: Evidence from West Bengal, India

177

Tribal Nations, Local Governments, and Regional Pluralism in Washington State: The Swinomish Approach in the Skagit Valley

178

Tribal particle swarm optimization for neurofuzzy inference systems and its prediction applications

179

Tribal Proclivity and its Effects on the Cooperate Existence of Nigeria in the Centenary Era: An Islamic Perspective

180

Tribal regimes in academia: a comparative analysis of market structure across disciplines

181

Tribalism, genealogy and the development of Al-Alkhalaf : A traditional settlement in southwestern Saudi Arabia

182

Tribarium dicitrate pentahydrate, [Ba3(C6H5O7)2(H2O)4]·H2O

183

Tribbles Coordinates Mitosis and Morphogenesis in Drosophila by Regulating String/CDC25 Proteolysis

184

Tribbles homolog 2 (Trib2) and HoxA9 cooperate to accelerate acute myelogenous leukemia

185

Tribbles homolog 2 inactivates C/EBPα and causes acute myelogenous leukemia

186

Tribendimidine: a promising, safe and broad-spectrum anthelmintic agent from China

187

Tribe-PSO: A novel global optimization algorithm and its application in molecular docking

188

Tribes: How race, religion, and identity determine success in the new global economy : Joel Kotkin New York: Random House, 343 , $12.00, 1992

189

Tribhuvan University area serves as a greenspace for birds in the Kathmandu Valley, Central Nepal

190

Tri-bimaximal mixing and the neutrino oscillation data

191

Tri-bimaximal neutrino mixing and quark masses from a discrete flavour symmetry Original Research Article

192

Tri-bimaximal neutrino mixing and the image flavor symmetry Original Research Article

193

Tri-bimaximal neutrino mixing from discrete symmetry in extra dimensions Original Research Article

194

Tri-bimaximal neutrino mixing from image and image Original Research Article

195

Tri-bimaximal neutrino mixing from orbifolding Original Research Article

196

Tri-bimaximal neutrino mixing, image and the modular symmetry Original Research Article

197

Triblock and star-block copolymers of N-(2-hydroxypropyl)methacrylamide or N-vinyl-2-pyrrolidone and d,l-lactide: synthesis and self-assembling properties in water

198

Triblock copolymer ionomer membranes: Part I. Methanol and proton transport

199

Triblock copolymer ionomer membranes: Part II. Structure characterization and its effects on transport properties and direct methanol fuel cell performance

200

Triblock copolymer theory: free energy, disordered phase and weak segregation

201

Triblock copolymers as destabilizers of water-in-crude oil emulsions

202

Triblock copolymers of -caprolactone, trimethylene carbonate, and L-lactide: Effects of using random copolymer as hard-block

203

Triblock copolymers of -caprolactone, trimethylene carbonate, and L-lactide: Effects of using random copolymer as hard-block

204

Tri-block copolymers with mono-disperse crystallizable diamide segments: Synthesis, analysis and rheological properties

205

Triblock polymer template assisted sol–gel process for fabrication of multi-channel TiO2/ZrO2 ultrafiltration membrane

206

Tribo electrochemical behavior of ferrite and ferrite–martensite stainless steels in chloride and sulfate media

207

Triboactive materials for dry reciprocating sliding motion at ultra-high frequency

208

Tribocatalytic oxidation of ethylene in the rubbing of palladium against aluminum oxide

209

Tribo-Characteristics of Stainless Steel Sheets in Iterative Processes of Sheet Metal Forming

210

Tribo-charge and rebound characteristics of particles impact on inclined or rotating metal target

211

Tribocharging in a rotating shaft–oil–lip seal system for different engine base oils, additive, and their blends

212

Tribocharging in a rotating shaft–oil–seal system and the effect of an external electric field

213

Tribocharging mechanism of mono-component irregular and spherical toners in an electrophotographic development system

214

Tribocharging of plastics granulates in a fluidized bed device

215

Tribocharging studies on inhabited cleanroom garments

216

Tribochemical aspects of silicon nitride ceramic sliding against stainless steel under the lubrication of seawater

217

Tribochemical characterization of the lubrication film at the Si3N4Si3N4 interface sliding in aqueous solutions

218

Tribochemical decomposition of formic acid on the nascent surfaces of steel formed by scratching

219

Tribochemical effects in formation of polymer transfer film

220

Tribochemical effects on CNx films

221

Tribochemical effects on the friction and wear behaviors of a-C:H and a-C films in different environment

222

Tribochemical interactions of piston ring coatings with molybdenum dithiocarbomate friction modifier

223

Tribochemical investigation of DLC coating in water using stable isotopic tracers

224

Tribochemical investigation of tungsten carbide/titanium alloy tribo-couples under aqueous lubrication

225

Tribochemical reaction of hydrogenated diamond-like carbon films: a clue to understand the environmental dependence

226

Tribochemical reaction on metal-on-metal hip joint bearings: A comparison between in-vitro and in-vivo results

227

Tribochemical reactions on sliding surface of the sintered metallic brake linings against SiC ceramic brake disk

228

Tribochemical structuring and coating of implant metal surfaces with titanium oxide and hydroxyapatite layers

229

Tribochemistry between hydrogen and diamond-like carbon films

230

Tribochemistry of lubrication issues of magnetic disk storage devices

231

Tribochemistry of monomolecular lubricant films of ethanolamine oligomers

232

Tribochemistry of ZDDP in molecular orbital calculations

233

Tribo-Corrosion 2006—A passage to India to celebrate the 1st International Conference on Tribo-Corrosion

234

Tribocorrosion behavior of CoCrMo alloy for hip prosthesis as a function of loads: A comparison between two testing systems

235

Tribocorrosion behavior of duplex treated pure titanium in Simulated Body Fluid

236

Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution

237

Tribocorrosion behavior of plasma nitrided Ti–6Al–4V alloy in neutral NaCl solution

238

Tribocorrosion behavior of S-phase surface engineered medical grade Co–Cr alloy

239

Tribocorrosion behavior of Ti3SiC2 in the dilute and concentrated sulfuric acid solutions

240

Tribocorrosion behavior of Ti–C–O–N nanostructured thin films (black) for decorative applications

241

Tribocorrosion behavior of Zn, Zn–Ni, Cd and Cd–Ti electrodeposited on low carbon steel substrates

242

Tribocorrosion behavior of β titanium alloys in physiological solutions containing synovial components

243

Tribo-corrosion behaviors of Ti3SiC2/Si3N4 tribo-pair in hydrochloric acid and sodium hydroxide solutions

244

Tribocorrosion behaviour of AISI 304 stainless steel in 0.5 M NaCl solution

245

Tribocorrosion behaviour of DLC-coated 316L stainless steel

246

Tribocorrosion behaviour of duplex surface treated AISI 304 stainless steel

247

Tribocorrosion behaviour of Ni–SiC composite coatings under lubricated conditions

248

Tribocorrosion behaviour of Ni–SiC nano-structured composite coatings obtained by electrodeposition

249

Tribocorrosion behaviour of overlay welded Ni–Cr 625 alloy in sulphuric and nitric acids: Electrochemical and chemical effects

250

Tribocorrosion behaviour of plasma nitrided and plasma nitrided + oxidised Ti6Al4V alloy

251

Tribocorrosion behaviour of powder metallurgy duplex stainless steels sintered in nitrogen

252

Tribocorrosion behaviour of ZrOxNy thin films for decorative applications

253

Tribocorrosion damage of a Jethete M152 type stainless steel

254

Tribocorrosion in implants—assessing high carbon and low carbon Co–Cr–Mo alloys by in situ electrochemical measurements

255

Tribocorrosion mechanisms of NiCrMo-625 alloy: An electrochemical modeling approach

256

Tribo-corrosion mechanisms of stainless steel in soft drinks

257

Tribocorrosion modeling of stainless steel in a sliding pair of pin-on-plate type

258

Tribo-corrosion of Ag and Ag-alloy ITO multilayers used in solar energy applications

259

Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion–wear components and effect of contact area

260

Tribocorrosion of stellite 6 in sulphuric acid medium: electrochemical behaviour and wear

261

Tribocorrosion response of the Ti6Al4V alloys commonly used in femoral stems

262

Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique

263

Tribodynamic aspects of the resource of electric submersible vane pumps for oil production

264

Triboelectric characteristics of mannitol based formulations for the application in dry powder inhalers

265

Triboelectric charging and dielectric properties of pharmaceutically relevant mixtures

266

Triboelectric Charging Between Polytetrafluoroethylene and Metals

267

Triboelectric charging in metal–polymer contacts – How to distinguish between electron and material transfer mechanisms

268

Triboelectric charging of insulators – Mass transfer versus electrons/ions

269

Triboelectric charging of polymer powders in fluidization and transport processes

270

Triboelectric, corona, and induction charging of insulators as a function of pressure

271

Triboelectricity in polymers: effects of the ionic nature of carbon–carbon bonds in the polymer main chain on charge due to yield of mechano-anions produced by heterogeneous scission of the carbon–carbon bond by mechanical fracture

272

Triboelectrics: The influence of particle surface roughness and shape on charge acquisition during aerosolization and the DPI performance

273

Triboelectrification between polycrystalline and monocrystalline ice

274

Tribo-electrification mechanism for self-mated metals in dry severe wear process: Part I. pure hard metals

275

Tribo-electrification mechanism for self-mated metals in dry severe wear process: Part II: pure soft metals

276

Tribo-electrification mechanisms for dissimilar metal pairs in dry severe wear process: Part I. Effect of speed

277

Tribo-electrification mechanisms for dissimilar metal pairs in dry severe wear process: Part II. Effect of load

278

Tribo-electrification of active pharmaceutical ingredients and excipients

279

Triboelectrification of houseflies (Musca domestica L.) walking on synthetic dielectric surfaces

280

Triboelectrification of materials used in tape heads ☆

281

Triboelectrification of molten linear low-density polyethylene under continuous extrusion

282

Triboelectrification of paper in the offset printing process

283

Tribo-electrification of particles under sudden change of fluid flow in the junction between branch pipe and straight pipe

284

Triboelectrification of particulate flows on surfaces: Part I — Experiments

285

Triboelectrification of particulate flows on surfaces: Part II — Mechanisms and models

286

Triboelectrification of pharmaceutically relevant powders during low-shear tumble blending

287

Tribo-electrification of powders due to dispersion

288

Triboelectrification of wood with PTFE

289

Triboelectrochemical behaviour of a Si3N4–TiN ceramic composite and a titanium alloy commonly used in biomedical applications

290

Tribo-electrochemical characterization of metallic biomaterials for total joint replacement

291

Triboelectrochemical investigation of the friction and wear behaviour of TiN coatings in a neutral solution

292

Triboelectrochemical techniques and interpretation methods in tribocorrosion: A comparative evaluation

293

Triboelectromagnetic phenomena in a diamondrhydrogenated-carbon-film tribosystem under perfluoropolyether fluid lubrication

294

Triboelectron emission from metal surfaces in sliding contact with polytetrafluoroethylene: Relevance to work function and surface potential

295

Tribo-electrostatic behaviour of high ash non-coking Indian thermal coal

296

Triboelectrostatic beneficiation of fly ash

297

Triboelectrostatic separation of fly ash and charge reversal

298

Triboemission from alumina, single crystal sapphire, and aluminum

299

Triboemission of electrons, ions, and photons from diamondlike carbon films and generation of tribomicroplasma

300

Tribo-energetic correlation of tool thermal properties to wear of WC-Co inserts in high speed dry machining of aeronautical grade titanium alloys

301

Triboengineering problems of lead coolant in innovative fast reactors

302

Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

303

Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with focused ion beam and transmission electron microscopy

304

Tribofilm formation from ZnDTP on diamond-like carbon

305

Tribofilm formation of lightly loaded self mated alumina contacts

306

Tribofilm formation on cemented carbides in dry sliding conformal contact

307

Tribo-functional design of double cone drill implications in tool wear during drilling of copper mesh/CFRP/woven ply

308

Tribol world-class for Volkswagen

309

Tribol world-class for Volkswagen

310

Tribo-layer and its role in dry sliding wear of Ti–6Al–4V alloy

311

Tribo-layer formation during sliding wear of TiN coatings

312

Tribolayer formation in a metal-on-metal (MoM) hip joint: An electrochemical investigation

313

Tribological (wear) properties of aluminum–silicon eutectic base alloy under dry sliding condition

314

Tribological Action and Cutting Performance of MQL Media in Machining of Aluminum

315

Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions

316

Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations

317

Tribological analysis of nano-composite diamond-like carbon films deposited by unbalanced magnetron sputtering

318

Tribological analysis of TiN and DLC coated contacts by 3D FEM modelling and stress simulation

319

Tribological and anti-corrosion properties of Ni–W–CeO2 coatings against molten glass

320

Tribological and corrosion behavior of CrN coatings: Roles of substrate and deposition defects

321

Tribological and corrosion behavior of friction stir processed Ti-CaP nanocomposites in simulated body fluid solution

322

Tribological and corrosion testing of surface engineered surgical grade CoCrMo alloy

323

Tribological and corrosion wear of graphite ring against Ti6Al4V disk in artificial sea water

324

Tribological and corrosive properties of silver thin films prepared by e-beam ion plating method

325

Tribological and cutting behavior of silicon nitride tools coated with monolayer- and multilayer-microcrystalline HFCVD diamond films

326

Tribological and deformation behaviour of titanium coating under different sliding contact conditions

327

Tribological and dry machining evaluation of superhard TiB2/TiC multilayer coatings deposited on Si(001), M2 steel, and C3 WC cutting tool inserts using magnetron sputtering

328

Tribological and electrical properties of ceramic matrix composites with carbon nanotubes

329

Tribological and electrical properties of nanocrystalline Cu films deposited by DC magnetron sputtering with varying temperature

330

Tribological and electrical properties of TiO2 thin films for polymer insulator as the dielectric coating of electric railroad

331

Tribological and Electrochemical Behavior of CrN/ZrN multilayer Coatings Produced by Arc-PVD

332

Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti–6Al–4V artificial hip joints

333

Tribological and fatigue failure properties of porous P/M bearing

334

Tribological and hydrothermal behaviour of silicon carbide under water lubrication

335

Tribological and mechanical behaviors of CrN/a-CNx superlattice thin films

336

Tribological and mechanical investigation of MC nylon reinforced by modified graphene oxide

337

Tribological and mechanical properties of carbon nitride films deposited by ionised magnetron sputtering

338

Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material

339

Tribological and mechanical properties of HFCVD diamond-coated WC-Co substrates with different Cr interlayers

340

Tribological and mechanical properties of high power laser surface-treated metallic glasses

341

Tribological and mechanical properties of Nomex fabric composites filled with polyfluo 150 wax and nano-SiO2

342

Tribological and microstructural evaluation of friction stir processed Al2024 alloy

343

Tribological and optical properties of crystalline and amorphous alumina thin films grown by low-temperature reactive magnetron sputter-deposition

344

Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/(HIPIMS-UBM) technique

345

Tribological and physicochemical characterization of strontium colloidal additives in mild wear regime

346

Tribological and stability investigations of alkylphosphonic acids on alumina surface

347

Tribological and structural properties of lubricating films of Al–4Si–20Pb alloy during dry sliding at different temperatures

348

Tribological and thermal characteristics of reduced phosphorus plain ZDDP oil in the presence of PTFE/FeF3/TiF3 under optimized extreme loading condition and a break in period using two different rotational speeds

349

Tribological and thermal functions of cutting tool coatings

350

Tribological and tribocorrosion behaviour of electrodeposited CoW alloys and CoW–WC nanocomposites

351

Tribological and vibroacoustic behavior of a contact between rubber and glass (application to wiper blade)

352

Tribological application of carbon nanotubes in a metal-based composite coating and composites Original Research Article

353

Tribological application of molecular deposition (MD) films

354

Tribological approaches for green metal forming

355

TRIBOLOGICAL ASPECT OF THE PROBLEM OF SPACECRAFT RELIABILITY

356

Tribological aspects of machining aluminium metal matrix composites

357

Tribological aspects of the choice of metalworking fluid in cutting processes

358

Tribological aspects of tool–chip and tool–work contact in machining and the application of laser spectrometry

359

Tribological behavior and machining performance of non-hydrogenated diamond-like carbon coating tested against Ti–6Al–4V: Effect of surface passivation by ethanol

360

Tribological behavior and mechanical properties of friction stir processed HDPE/Fe-Fe3O4 composites

361

Tribological behavior and nature of tribofilms generated from fluorinated ZDDP in comparison to ZDDP under extreme pressure conditions—Part 1: Structure and chemistry of tribofilms

362

Tribological behavior and nature of tribofilms generated from fluorinated ZDDP in comparison to ZDDP under extreme pressure conditions—Part II: Morphology and nanoscale properties of tribofilms

363

Tribological behavior and phase transformation of single-crystal silicon in air

364

Tribological behavior and structural change of the LB film of MoS2 nanoparticles coated with dialkyldithiophosphate

365

Tribological behavior and surface analysis of magnetized sliding contact XC 48 steel/XC 48 steel

366

Tribological behavior and tribochemical reactions of alumina in HFC-134a environment

367

Tribological behavior and wear mechanisms of MoSi2-base composites sliding against AA6063 alloy at elevated temperature

368

Tribological behavior between micro- and nano-crystalline diamond films under dry sliding and water lubrication

369

Tribological behavior of (Cu42Zr42Al8Ag8)99.5Si0.5 bulk metallic glass

370

Tribological behavior of 316L stainless steel fabricated by micro powder injection molding

371

Tribological behavior of a 20CrMo alloy implanted with nitrogen ions by plasma source ion implantation

372

Tribological behavior of a novel alumina/nano-zirconia/niobium biocomposite against ultra high molecular weight polyethylene

373

Tribological behavior of a novel fullerene complex

374

Tribological behavior of a Ta-based coating on a Co–Cr–Mo alloy

375

Tribological behavior of a TiSiCN coating tested in air and coolant

376

Tribological behavior of Al2O3/Al composite coating on γ-TiAl at elevated temperature

377

Tribological behavior of Al–Si–SiCp composites/automobile brake pad system under dry sliding conditions

378

Tribological behavior of alumina-added apatite–wollastonite glass–ceramics in simulated body fluid

379

Tribological behavior of aluminum alloys in a vibratory finishing process

380

Tribological behavior of aluminum matrix composites containing complex metallic alloys AlCuFeB or AlCuFeCr particles

381

Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites

382

Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites

383

Tribological behavior of an Ag sub-nanometer-thick film on an Si (1 1 1) 7 × 7 surface at elevated temperatures

384

Tribological behavior of AZ91D magnesium alloy at elevated temperatures

385

Tribological behavior of B4C reinforced Fe-base bulk metallic glass composite coating

386

Tribological behavior of candidate coatings for Al die casting dies

387

Tribological behavior of carbon nanofibers deposited on hard nanocomposite (nc-Ti1 − xAlxN)/(a-Si3N4) coating

388

Tribological behavior of ceramic materials (Si3N4, SiC and Al2O3) in aqueous medium

389

Tribological behavior of coatings for continuous casting of steel

390

Tribological behavior of cold-sprayed nanocrystalline and conventional copper coatings

391

Tribological behavior of components for radial piston hydraulic motors: Bench tests, failure analysis and laboratory dry sliding tests

392

Tribological behavior of composite Langmuir–Blodgett films of triacontanoic acid

393

Tribological behavior of Cr2O3 coatings as bearing materials

394

Tribological behavior of CrN/WN multilayer coatings grown by ion-beam assisted deposition

395

Tribological behavior of cryogenically treated B4Cp/Al–12% Si composites

396

Tribological behavior of Cu–6Sn–6Zn–3Pb under sea water, distilled water and dry-sliding conditions

397

Tribological behavior of Cu–Cr–SiCp in situ composite

398

Tribological behavior of diamond-like carbon film with different tribo-pairs: A size effect study

399

Tribological behavior of diamond-like carbon produced by rf-PCVD based on energetic evaluation

400

Tribological behavior of diamond-like-carbon (DLC) coatings against aluminum alloys at elevated temperatures

401

Tribological behavior of diesel fuels and the effect of anti-wear additives

402

Tribological behavior of DLC coatings with functionally gradient interfaces

403

Tribological behavior of DLC/IL solid–liquid lubricating coatings in a high-vacuum condition with alternating high and low temperatures

404

Tribological behavior of DLC-coated articulating joint implants

405

Tribological behavior of Dy–sialon ceramics sliding against Si3N4 under lubrication of fluorine-containing oils

406

Tribological behavior of electrodeposited Ni–SnO2 nanocomposite coatings on steel

407

Tribological behavior of electrodeposited Zn, Zn–Ni, Cd and Cd–Ti coatings on low carbon steel substrates

408

Tribological behavior of electroless Ni–B coatings on magnesium and AZ91D alloy

409

Tribological behavior of electron beam D6ac weldment

410

Tribological behavior of epoxy composites under diesel-lubricated conditions

411

Tribological behavior of fast-carbonized PAN/phenolic-based carbon/carbon composite and method for improving same

412

Tribological behavior of fullerene–styrene sulfonic acid copolymer as water-based lubricant additive

413

Tribological behavior of gradient modified layer on 2024 aluminum alloy modified by plasma-based ion implantation

414

Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface

415

Tribological behavior of hafnium diboride thin films

416

Tribological behavior of hard carbon coatings on steel substrates

417

Tribological behavior of HVOF- and HVAF-sprayed composite coatings based on Fe-Alloy + WC–12% Co

418

Tribological behavior of hybrid glass/PTFE fabric composites with phenolic resin binder and nano-TiO2 filler

419

Tribological behavior of in situ Ag nanoparticles/polyelectrolyte composite molecular deposition films

420

Tribological behavior of laser-textured NiCrBSi coatings

421

Tribological Behavior of Magnesium Alloy AZ91 Coated with TiN/CrN by Arc-glow Plasma Depositing

422

Tribological behavior of micro/nano-patterned surfaces in contact with AFM colloidal probe

423

Tribological behavior of microarc oxidation coatings formed on titanium alloys against steel in dry and solid lubrication sliding

424

Tribological behavior of microwave processed copper–nanographite composites

425

Tribological behavior of Mo5Si3 particle reinforced Si3N4 matrix composites

426

Tribological behavior of nano TiO2 as an additive in base oil

427

Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy

428

Tribological behavior of natural fiber reinforced PLA composites

429

Tribological behavior of Ni3Al matrix self-lubricating composites containing WS2, Ag and hBN tested from room temperature to 800 °C

430

Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures

431

Tribological behavior of Ni-based composite under distilled water lubrication

432

Tribological behavior of Ni-based composite under distilled water lubrication

433

Tribological behavior of Ni-based composite under distilled water lubrication

434

Tribological behavior of NiCr-base blended and nanostructured composite APS coatings by rig test

435

Tribological behavior of NiTi alloy against 52100 steel and WC at elevated temperatures

436

Tribological behavior of NiTi alloy in martensitic and austenitic states

437

Tribological behavior of PACVD TiN coatings in the temperature range up to 500 °C

438

Tribological behavior of PEEK/PTFE composites reinforced with potassium titanate whiskers

439

Tribological behavior of plasma electrolytic oxidation coatings on the surface of Mg–8Li–1Al alloy

440

Tribological behavior of plasma Mo–N surface modified Ti–6Al–4V alloy

441

Tribological behavior of plasma sprayed Al–Cu–Fe + Sn quasicrystalline composite coatings

442

Tribological behavior of plasma sprayed Cr2O3–3%TiO2 coatings

443

Tribological behavior of plasma-enhanced CVD a-C:H films. Part I: effect of processing parameters

444

Tribological behavior of plasma-enhanced CVD a-C:H films. Part II: multinanolayers

445

Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution

446

Tribological behavior of poly (phenyl p-hydroxybenzoate)/polytetrafluoroethylene composites filled with hexagonal boron nitride under dry sliding condition

447

Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles

448

Tribological behavior of polymethyl methacrylate against different counter-bodies induced by torsional fretting wear

449

Tribological behavior of polyurethane-based composite coating reinforced with TiO2 nanotubes

450

Tribological behavior of PTFE film with nanodiamond

451

Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles

452

Tribological behavior of PTFE sliding against steel in sea water

453

Tribological behavior of pure Mg and AZ31 magnesium alloy strengthened by Al2O3 nano-particles

454

TRIBOLOGICAL BEHAVIOR OF REINFORCED AND UNREINFORCED HIGH CHROMIUM CAST IRON

455

Tribological behavior of RH ceramics made from rice husk sliding against stainless steel, alumina, silicon carbide, and silicon nitride

456

Tribological behavior of scar skin and prosthetic skin in vivo

457

Tribological behavior of select MAX phases against Al2O3 at elevated temperatures

458

Tribological behavior of selected engineering polymers under rolling contact

459

Tribological behavior of selected Mn + 1AXn phase thin films on silicon substrates

460

Tribological behavior of self-assembled double layer measured by a pin-on-plate method

461

Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method

462

Tribological behavior of sialon ceramics sliding against steel lubricated by fluorine-containing oils

463

Tribological behavior of SiC coating on C/C composites against SiC and WC under unlubricated sliding

464

Tribological behavior of sol–gel TiO2 films on glass

465

Tribological behavior of spun Kevlar fabric composites filled with fluorinated compounds

466

Tribological behavior of sputter-deposited MoSX/Ni coatings

467

Tribological behavior of sputtered boron carbide coatings and the influence of processing gas

468

Tribological behavior of squeeze cast aluminum matrix composites

469

Tribological behavior of Stellite 21 modified with yttrium

470

Tribological behavior of sugar mill roller shaft in laboratory simulated conditions

471

Tribological behavior of T-401/tin–bronze composite coating deposited by HVOF on the bushing of planet journals

472

Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys

473

Tribological behavior of the bronze–steel pair for worm gearing

474

Tribological behavior of the carbon fiber reinforced polyphenylene sulfide (PPS) composite coating under dry sliding and water lubrication

475

Tribological behavior of the refined, bleached, and deodorized palm kernel as an alternative lubricant

476

Tribological behavior of thermoplastic polyurethane elastomers

477

Tribological behavior of thick CrN coatings deposited by modulated pulsed power magnetron sputtering

478

Tribological behavior of three-dimensional needled ceramic modified carbon/carbon composites in seawater conditions

479

Tribological behavior of Ti2SnC particulate reinforced copper matrix composites

480

Tribological behavior of Ti3SiC2/(WC–10Co) composites prepared by spark plasma sintering

481

Tribological Behavior of Ti3SiC2-based Material

482

Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800 °C

483

Tribological behavior of TiB2–TiC–Al2O3 composite coating synthesized by combined SHS and laser technology

484

Tribological behavior of TiCN-based cermets at elevated temperatures

485

Tribological behavior of TiN and CrN coatings sliding against an epoxy molding compound

486

Tribological behavior of Ti–Si–N coating layers prepared by a hybrid system of arc ion plating and sputtering techniques

487

Tribological behavior of tungsten-doped DLC coating under oil lubrication

488

Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions

489

Tribological behavior of W2C nano-particle reinforced Si3N4 matrix composite

490

Tribological behavior of WC/DLC/WS2 nanocomposite coatings

491

Tribological behavior of WC–Ni cemented carbide irradiated by high-intensity pulsed ion beam

492

Tribological behavior of W-DLC coated rubber seals

493

Tribological behavior study on Ti–Nb–Sn/hydroxyapatite composites in simulated body fluid solution

494

Tribological behavior under aggressive environment of diamond-like carbon films with incorporated nanocrystalline diamond particles

495

Tribological behaviors and mechanism of sulfur- and phosphorus-free organic molybdate ester with zinc dialkyldithiophosphate

496

Tribological behaviors of bulk Ti3SiC2 and influences of TiC impurities

497

Tribological behaviors of carbon composite grooved surfaces

498

Tribological behaviors of composite molecular deposition films

499

Tribological behaviors of diamond-like carbon coatings on plasma nitrided steel using three BN-containing lubricants

500

Tribological behaviors of DLC film deposited on female die used in strip drawing

501

Tribological behaviors of fullerene-like hydrogenated carbon (FL-C:H) film in different atmospheres sliding against Si3N4 ball

502

Tribological behaviors of graphite/epoxy two-phase composite coatings

503

Tribological behaviors of hierarchical porous PEEK composites with mesoporous titanium oxide whisker

504

Tribological behaviors of hot-pressed Al2O3/TiC ceramic composites with the additions of CaF2 solid lubricants

505

Tribological behaviors of lanthanum-based phosphonate 3-aminopropyltriethoxysilane self-assembled films

506

Tribological behaviors of plasma-treated carbon composite grooved surfaces

507

Tribological behaviors of polymer based journal bearings manufactured from particle reinforced bakelite composites

508

Tribological behaviors of self-assembled 3-aminopropyltriethoxysilane films on silicon

509

Tribological behaviors of SiC/h-BN composite coating at elevated temperatures

510

Tribological behaviors of single and dual sol–gel ceramic films on Ti–6Al–4V

511

Tribological behaviors of steel surfaces treated with ion sulphurization duplex processes

512

Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive

513

Tribological behaviors of Ti–6Al–4V modified by chemical methods

514

Tribological behaviour and mechanical properties of low temperature gas nitrided austenitic steel in relation to layer morphology

515

Tribological behaviour and microscopic wear mechanisms of UHMWPE sliding against thermal oxidation-treated Ti6Al4V

516

Tribological behaviour and microscopic wear mechanisms of UHMWPE sliding against thermal oxidation-treated Ti6Al4V

517

Tribological behaviour and microstructure of TiCxN(1−x) coatings deposited by filtered arc

518

Tribological behaviour and residual stress of electrodeposited Ni/Cu multilayer films on stainless steel substrate

519

Tribological behaviour and statistical experimental design of sintered iron–copper based composites

520

Tribological behaviour and wear mechanism of MoS2–Cr coatings sliding against various counterbody

521

Tribological behaviour and wear resistance of a SiC–MoSi2 composite dry sliding against Al2O3

522

Tribological behaviour at room temperature and at 550°C of TiC-based plasma sprayed coatings in fretting gross slip conditions

523

Tribological Behaviour of AA1060 Aluminium Alloy with the Aid of Using Nano Lubricant Additives

524

Tribological behaviour of Al18B4O33-whisker-reinforced hypoeutectic Al–Si–Mg-matrix composites under dry sliding conditions

525

Tribological behaviour of Al2O3/ZrO2-ZrO2 laminated composites

526

Tribological behaviour of aluminium alloy AA7075 after ion implantation

527

Tribological behaviour of an elastomer aged in different oils

528

Tribological behaviour of antiwear additives used in hydraulic applications: Synergistic or antagonistic with other surface-active additives?

529

Tribological behaviour of borided bearing steels at elevated temperatures

530

Tribological behaviour of carbide-free bainitic steel under dry rolling/sliding conditions

531

Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone)

532

Tribological behaviour of cast hypereutectic Al–Si–Cu alloy subjected to sliding wear

533

Tribological behaviour of composite materials based on clinker portland reinforced with oxides

534

Tribological behaviour of composites made of carbon fibres and ceramic matrix in the Si–C system

535

Tribological behaviour of Cu60Zr30Ti10 bulk metallic glass

536

Tribological behaviour of CVD diamond films on steel substrates

537

Tribological behaviour of diamond coatings sliding against Al alloys

538

Tribological behaviour of diamond coatings sliding against steel: An experimental and numerical approach

539

Tribological behaviour of DLC coatings compared to different materials used in hip joint prostheses

540

Tribological behaviour of DLC coatings for sheet metal forming tools

541

Tribological behaviour of DLC coatings in combination with biodegradable lubricants

542

Tribological behaviour of DLC-films and their application in micro deep drawing

543

Tribological behaviour of epoxy based composites for rapid tooling

544

Tribological behaviour of Fe–28Al–5Cr alloy reinforced by TiC under acid environment

545

Tribological behaviour of food grade polymers against stainless steel in dry sliding and with sugar

546

Tribological behaviour of hot rolling rolls

547

Tribological behaviour of HVOF sprayed near-nanostructured and microstructured WC-17wt.%Co coatings

548

Tribological behaviour of metal matrix and its composite

549

Tribological behaviour of multi-layered PVD nitride coatings

550

Tribological behaviour of multilayered textile composites: The effect of reciprocating sliding frequency

551

Tribological behaviour of nacre—Influence of the environment on the elementary wear processes

552

Tribological behaviour of near β titanium alloy as a function of α + β solution treatment temperature

553

Tribological Behaviour of OA-Capped WO3 Nanoparticles as an Additive to Base Oils

554

Tribological behaviour of oxide/graphite composite coatings deposited using electrolytic plasma process

555

Tribological behaviour of Pearlitic and Bainitic steel grades under various sliding conditions

556

Tribological behaviour of pipe coating in dry sliding contact with steel

557

Tribological behaviour of plasma nitrided Ti-5Al-2Nb-1Ta alloy against UHMWPE

558

Tribological behaviour of plasma-sprayed Al2O3 coatings under severe wear conditions

559

Tribological behaviour of plasma-sprayed WC coatings with and without laser remelting

560

Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant

561

Tribological behaviour of pulsed magnetron sputtered CrB2 coatings examined by reciprocating sliding wear testing against aluminium alloy and steel

562

Tribological behaviour of quenched and tempered, and austempered ductile iron at the same hardness level

563

Tribological behaviour of refined bleached and deodorized palm olein in different loads using a four-ball tribotester

564

Tribological behaviour of self compacting concrete

565

Tribological behaviour of semisolid–semisolid compocast Al–Si matrix composites reinforced with TiB2 coated B4C particulates

566

Tribological behaviour of shot peened Cu–Ni austempered ductile iron

567

Tribological behaviour of Si3N4 and Si3N4–%TiN based composites and multi-layer laminates

568

Tribological behaviour of Si3N4–BN ceramic materials for dry sliding applications

569

Tribological behaviour of sintered 316L stainless steel impregnated with MoS2 plain bearing

570

Tribological behaviour of the composite PEEK-CF30 at dry sliding against steel using statistical techniques

571

Tribological behaviour of thermally sprayed Ti–Cr–Si coatings

572

Tribological behaviour of thin a-C and a-C:H films with different topographic structure under rotating and oscillating motion for dry lubrication

573

Tribological behaviour of thin organic permanent coatings deposited on hot-dip coated steel sheet — a laboratory study

574

Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions—Application to the context of machining with carbide tools

575

Tribological behaviour of Ti-based alloys in simulated body fluid solution at fretting contacts

576

Tribological behaviour of Ti-based alloys in simulated body fluid solution at fretting contacts

577

Tribological behaviour of Ti-based alloys in simulated body fluid solution at fretting contacts

578

Tribological behaviour of tin-based materials and brass in oil lubricated conditions

579

Tribological behaviour of titanium carbide/amorphous carbon nanocomposite coatings: From macro to the micro-scale

580

Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts

581

Tribological behaviour of uni-directionally aligned silicon nitride against steel

582

Tribological behaviour of WC/C coatings operating under different lubrication regimes

583

Tribological behaviour of W–Ti–N coatings in semi-industrial strip-drawing tests

584

Tribological behaviour of W–Ti–N sputtered thin films

585

Tribological behaviours of carbon fibre reinforced PEEK sliding on silicon nitride lubricated with water

586

Tribological behaviours of PA/UHMWPE blend under dry and lubricating condition

587

Tribological behaviours of patterned PVD TiN spot coatings on M2 steel coated with different bias voltages

588

Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater

589

Tribological carbon-based coatings: An AFM and LFM study

590

Tribological changes on SS304 stainless steel induced by nitrogen plasma immersion ion implantation with and without auxiliary heating

591

Tribological characterisation of diamond-like carbon coatings on Co–Cr–Mo alloy for orthopaedic applications

592

Tribological characterisation of hard coatings on steel

593

Tribological characterisation of PVD coatings for cutting tools

594

Tribological characterisation of siliconcarbonitride ceramics derived from preceramic polymers

595

Tribological characteristics and cutting performance of Crx%C-coated carbide tools

596

Tribological Characteristics and Cutting Performance of Lubricant Esters for Semi-dry Machining

597

Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels

598

Tribological characteristics of A356 Al alloy–SiCP composite discs

599

Tribological characteristics of aluminum alloys sliding against steel lubricated by ammonium and imidazolium ionic liquids

600

Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil

601

Tribological characteristics of ashless dithiocarbamate derivatives and their combinations with ZDDP as additives in mineral oil

602

Tribological characteristics of chromium steels in three various atmospheres under high-speed conditions

603

Tribological characteristics of diamond-like carbon (DLC) based nanocomposite coatings

604

Tribological characteristics of electroless Ni–B coating and optimization of coating parameters using Taguchi based grey relational analysis

605

Tribological characteristics of electroless Ni–P–MoS2 composite coatings at elevated temperatures

606

Tribological characteristics of high strength steel sheets under hot stamping conditions

607

Tribological characteristics of highly wear-durable ECR-sputtered carbon film

608

Tribological characteristics of highly wear-durable ECR-sputtered silicon nitride films

609

Tribological characteristics of innovative Al6061–carbon fiber rod metal matrix composites

610

Tribological characteristics of low-pressure plasma-sprayed A12O3 coating from room temperature to 800 °C

611

Tribological characteristics of magnesium alloy using N-containing compounds as lubricating additives during sliding

612

Tribological characteristics of MoS2–Nb solid lubricant film in different tribo-test conditions

613

Tribological characteristics of nickel based composite coatings

614

Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions

615

Tribological characteristics of paraffin liquid with nanodiamond based on the scuffing life and wear amount

616

Tribological Characteristics of Plasma Nitrided and PVD Coated Cr-Mo-V Steels

617

Tribological characteristics of polyelectrolyte multilayers

618

Tribological characteristics of self-assembled monolayer with siloxane bonding to Si surface

619

Tribological characteristics of Si3N4-based composites in unlubricated sliding against steel ball

620

Tribological characteristics of Si3N4-based composites in unlubricated sliding against steel ball

621

Tribological characteristics of Si3N4-based composites in unlubricated sliding against steel ball

622

Tribological characteristics of Si3N4–hBN ceramic materials sliding against stainless steel without lubrication

623

Tribological characteristics of Si-containing diamond-like carbon films under oil-lubrication

624

Tribological characteristics of some environmentally friendly lubricants

625

Tribological characteristics of WS2/MoS2 solid lubricating multilayer films

626

Tribological Characterization of 7025/TiO2 Nanocomposite at A various Amount of Nanoreinforcement

627

Tribological characterization of a biocompatible thin film of UHMWPE on Ti6Al4V and the effects of PFPE as top lubricating layer

628

Tribological characterization of biocompatible HAp-TiO2 coatings obtained by high velocity oxy-fuel spray

629

Tribological characterization of chromium nitride coating deposited by filtered cathodic vacuum arc

630

Tribological characterization of diamond-like carbon films on nonledeburitic high-speed steels

631

Tribological characterization of environmentally adapted ester based fluids

632

Tribological characterization of gradient monolayer films from trichlorosilanes on silicon

633

Tribological characterization of polyvinyl alcohol hydrogel as substitute of articular cartilage

634

Tribological characterization of rail squat defects

635

Tribological characterization of surface modified UHMWPE against DLC-coated Co–Cr–Mo

636

Tribological coatings for lubrication over multiple thermal cycles

637

Tribological comparison of different C-based coatings in lubricated and unlubricated conditions

638

Tribological compatibility and improvement of machining productivity and surface integrity

639

Tribological conditions in mobile bearing total knee prostheses

640

Tribological consequences of rubber composition and structure – case studies

641

Tribological contact analysis of a rigid ball sliding on a hard coated surface, Part III: Fracture toughness calculation and influence of residual stresses

642

Tribological contact analysis of a rigid ball sliding on a hard coated surface: Part I: Modelling stresses and strains

643

Tribological contact analysis of a rigid ball sliding on a hard coated surface: Part II: Material deformations, influence of coating thickness and Youngʹs modulus

644

Tribological design methods for minimum surface damage of HDD slider

645

Tribological effect of iron oxide residual on the DLC film surface under seawater and saline solutions

646

Tribological effects of plasma immersion ion implantation heating treatments on Ti–6Al–4V alloy

647

Tribological effects of surface texturing on nitriding steel for high-performance engine applications

648

Tribological effects of the geometrical properties of plasma spray coatings partially melted by laser

649

Tribological enhancement of AISI 420 martensitic stainless steel through friction-stir processing

650

Tribological enhancement of CrN coatings by niobium and carbon ion implantation

651

Tribological evaluation of AISI 304 stainless steel duplex treated by plasma electrolytic nitrocarburising and diamond-like carbon coating

652

Tribological evaluation of aluminum and magnesium sheet forming at high temperatures

653

Tribological evaluation of coconut oil as an environment-friendly lubricant

654

Tribological evaluation of Fe–B–TiB2 metal matrix composites

655

Tribological evaluation of high-speed steels with a regulated carbide phase

656

Tribological evaluation of hydrogel articulations for joint arthroplasty applications

657

Tribological evaluation of hydrogenated DLC in Diesel lubricated model test

658

Tribological Evaluation of Mineral Oil and Vegetable Oil as a Lubricant

659

Tribological evaluation of oil pump relief valve coatings compatible with an aluminum oil pump body

660

Tribological evaluation of oxidized zirconium using an articular cartilage counterface: a novel material for potential use in hemiarthroplasty

661

Tribological evaluation of porcine skin

662

Tribological evaluation of S-(1H-benzotriazole-1-yl) methyl N,N-dialkyldithiocarbamates as additives in rapeseed oil

663

Tribological evaluation of Si–O containing diamond-like carbon films

664

Tribological evaluation of some potential tribo materials used in column lift rolling contacts—A case study

665

Tribological evaluation of surface modified H13 tool steel in warm forming of Ti–6Al–4V titanium alloy sheet

666

Tribological evaluation of α, -diimidazoliumalkylene hexafluorophosphate ionic liquid and benzotriazole as additive

667

Tribological evaluation on Ni3Al-based alloy and its composites under unlubricated wear condition

668

Tribological failure analysis of a heavily-loaded slow speed hybrid journal bearing

669

Tribological failure analysis of a magnetic drive pump

670

Tribological failure analysis of gear contacts of Exciter Sieve gear boxes

671

Tribological failure analysis of journal bearings used in sugar mills

672

Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

673

Tribological improvements of ion implanted technological alloys: Plasma immersion vs. conventional ion implantation

674

Tribological improvements of plasma immersion implanted CoCr alloys

675

Tribological interaction between multi-walled carbon nanotubes and silica surface using lateral force microscopy

676

Tribological investigation of a functional medical textile with lubricating drug-delivery finishing

677

Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content

678

Tribological investigation of CaF2 nanocrystals as grease additives

679

Tribological investigation of coatings for artificial joints

680

Tribological investigation of layered sodium silicate as lubricant additives prepared by freezing titration ion exchange

681

Tribological investigation of MoS2 coatings deposited on the laser textured surface

682

Tribological investigation of packing friction along the stem of a valve

683

Tribological investigation of RBD palm olein in different sliding speedsusing pin-on-disk tribotester

684

Tribological investigation of the effects of particle size, loading and crystallinity on poly(ethylene) terephthalate nanocomposites

685

Tribological investigation of WC/C coating under dry sliding conditions

686

Tribological investigation of zirconium nitride/silver nanocomposite structures

687

Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming

688

Tribological investigations of diamond–metal grinding pads

689

Tribological investigations of perfluoroalkylsilanes monolayers deposited on titanium surface

690

Tribological investigations of the wear couple alumina–CFRP for total hip replacement

691

Tribological investigations on micromachined silicon sliders

692

Tribological layers and the wear of ductile materials

693

Tribological metal-carbon coatings deposited by PVD magnetron sputtering

694

Tribological method to objectify similarity of vague tactile sensations experienced during application of liquid cosmetic foundations

695

Tribological modeling: Application of fast Fourier transform

696

Tribological oxidation behaviour of PVD hard coatings

697

Tribological performance and action mechanism of S-[2-(acetamido) thiazol-1-yl] dialkyl dithiocarbamate as additive in rapeseed oil

698

Tribological performance and action mechanism of S-alkyl and S-benzimidazole substituted dialkyldithiocarbamates

699

Tribological performance and liquid impact erosion resistance of Ti-containing amorphous carbon coatings

700

Tribological performance and tribochemical processes in a DLC/steel system when lubricated in a fully formulated oil and base oil

701

Tribological performance evaluation of (1 1 1) preferred oriented TiN duplex coatings

702

Tribological performance of a DLC coating in combination with water-based lubricants

703

Tribological performance of a magneto-rheological suspension

704

Tribological performance of a Ni3Al matrix self-lubricating composite coating tested from 25 to 1000 °C

705

Tribological performance of A206 aluminum alloy containing silica sand particles

706

Tribological performance of Al–12Si coatings created via Electrospark Deposition and Spark Plasma Sintering

707

Tribological performance of amorphous carbon films prepared on steel substrates with carbon implantation pre-treatment

708

Tribological performance of aqueous copolymer lubricant in loaded contact with Si and coated Ti film

709

Tribological performance of brake friction materials containing carbon nanotubes

710

Tribological performance of chromium/chromium carbide multilayers deposited by r.f. magnetron sputtering

711

Tribological performance of CuS–ZnO nanocomposite film: The effect of CuS doping

712

Tribological performance of diamond-coated Ti–6Al–4V alloy with respect to diamond characteristics

713

Tribological performance of different DLC coatings in water-lubricated conditions

714

Tribological performance of DLC films deposited on ACM rubber by PACVD

715

Tribological performance of environmentally friendly refrigerant HFO-1234 yf under starved lubricated conditions

716

Tribological performance of fluorinated polyimide-based nanocomposite coatings reinforced with PMMA-grafted-MWCNT

717

Tribological performance of graphite containing tin lead bronze–steel bimetal under reciprocal sliding test

718

Tribological performance of hybrid filtered arc-magnetron coatings. Part II: Tribological properties characterization

719

Tribological performance of hybrid filtered arc-magnetron coatings: Part I: Coating deposition process and basic coating properties characterization

720

Tribological performance of microwave sintered copper–TiC–graphite hybrid composites

721

Tribological performance of MoS2 coatings in liquid helium and at high loads

722

Tribological performance of nano-thin fluoropolymer coated sliders

723

Tribological performance of Ni3Al–15 wt% Ti3SiC2 composites against Al2O3, Si3N4 and WC-6Co from 25 to 800 °C

724

Tribological performance of Ni–CeO2 composite coatings by electrodeposition

725

Tribological performance of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica

726

Tribological performance of plasma nitrided gamma based titanium aluminides

727

Tribological performance of PTFE- and PEEK-based coatings under oil-less compressor conditions

728

Tribological performance of PTFE-based coatings for air-conditioning compressors

729

Tribological performance of resin impregnated gunny (RIG) and resin reinforced honeycomb (RRH) material composites

730

Tribological Performance of Self-lubricating Cast Al-5Cu-1Mg Nanocomposite Reinforced with Graphene Nano Sheets

731

Tribological performance of SiC and TiB2 against SiC and Al2O3 at low sliding speeds

732

Tribological performance of silicone composite coatings filled with wax-containing microcapsules

733

Tribological performance of some alternative bearing materials for artificial joints

734

Tribological performance of some polyoxyethylene dithiophosphate derivatives water solutions

735

Tribological performance of thermally sprayed cermet coatings containing solid lubricants

736

Tribological performance of thin organic permanent coatings deposited on 55%Al–Zn coated steel — influence of coating composition and thickness on friction and wear

737

Tribological performance of thin overlays for journal bearings

738

Tribological performance of Ti-6Al-4V plasma-based ion implanted with nitrogen

739

Tribological performance of TiAl matrix self-lubricating composites containing Ag, Ti3SiC2 and BaF2/CaF2 tested from room temperature to 600 °C

740

Tribological performance of TiN supported molybdenum and tantalum carbide coatings in abrasion and sliding contact

741

Tribological performance of ultra-high-molecular-weight polyethylene sliding against DLC-coated and nitrogen ion implanted CoCrMo alloy measured in a hip joint simulator

742

Tribological performance of α-Fe(Cr)-Fe2B-FeB and α-Fe(Cr)-h-BN coatings obtained by laser melting

743

Tribological performances of diamond film and graphite/diamond composite film

744

Tribological performances of Mo6S3I6 nanowires

745

Tribological performances of Ni3Si–Cr7C3 composite coatings under water and acid environments

746

Tribological performances of non-hydrogenated amorphous carbon coupling with different coating counterparts in ambient air and water

747

Tribological performances of the graphite-like carbon films deposited with different target powers in ambient air and distilled water

748

Tribological performances of YSZ composite coatings manufactured by suspension plasma spraying

749

Tribological periodic processes exhibited by acceleration or braking of a shaft–pad system

750

Tribological properties and action mechanism of N,N-dialkyl dithiocarbamate-derived S-hydroxyethyl borate esters as additives in rapeseed oil

751

Tribological properties and adhesive strength of DLC coatings prepared under different substrate bias voltages

752

Tribological properties and deformation mechanism of TiAlN coating sliding with various counterbodies

753

Tribological properties and dry machining characteristics of PVD-coated carbide inserts

754

Tribological properties and high speed drilling application of MoS2–Cr coatings

755

Tribological properties and morphology of bimodal elastomeric nitrile butadiene rubber networks

756

Tribological properties and rolling-contact-fatigue lives of TiN/SiNx multilayer coatings

757

Tribological properties and thermal stability of TiAlCN coatings deposited by ICP-assisted sputtering

758

Tribological properties and wear mechanism of sputtered C/Cr coating

759

Tribological properties changes of H13 steel induced by MEVVA Ta ion implantation$

760

Tribological properties evaluation of AISI 1095 steel chromized at different temperatures

761

Tribological properties of (Ti,Al)N coatings deposited at different bias voltages using the cathodic arc technique

762

Tribological properties of a CrN coating containing carbon nanoparticles

763

Tribological properties of a Fe3Al material in sulfuric acid corrosive environment

764

Tribological properties of a liquid nitrocarburised special purpose cold work tool steel

765

Tribological properties of a perfluoropolyether lubricant with 3-phenylpropyl functional group for hard disk media

766

Tribological properties of a-C/Cr(N) coatings in micro-and nano-scales

767

Tribological properties of adaptive nanocomposite coatings made of yttria stabilized zirconia and gold

768

Tribological properties of adaptive NiCrAlY–Ag–Mo coatings prepared by atmospheric plasma spraying

769

Tribological properties of additives for water-based lubricants

770

Tribological Properties of Al2024-2wt.%TiO2 Nanocomposite Produced by Mechanical Alloying and Hot-Pressing

771

Tribological properties of Al2O3 hard coatings modified by mechanical blasting and polishing post-treatment

772

Tribological properties of Al2O3 nanoparticles as lubricating oil additives

773

Tribological properties of Al6061–Al2O3 nanocomposite prepared by milling and hot pressing

774

Tribological properties of AlCoCrFeNiCu high-entropy alloy in hydrogen peroxide solution and in oil lubricant

775

Tribological properties of aligned film of amorphous carbon nanorods on AAO membrane in different environments

776

Tribological properties of AlNCeO2Si3N4 cutting materials in unlubricated sliding against tool steel and cast iron

777

Tribological properties of AlNCeO2Si3N4 cutting materials in unlubricated sliding against tool steel and cast iron

778

Tribological properties of Al–Ni–Co–Si quasicrystalline coatings against Cr-coated cast iron disc

779

Tribological properties of amorphous carbon thin films grown by magnetron sputtering method

780

Tribological properties of an environmentally adopted universal tractor transmission oil based on vegetable oil

781

Tribological properties of aqueous solution of imidazoline borates

782

Tribological properties of aqueous solutions of alkyl polyglucosides

783

Tribological properties of arc sprayed coatings obtained from FeCrB and FeCr-based powder wires

784

Tribological Properties of B4CNi Cermet Coating Produced by HVOF Process on the Surface of 4130 Steel

785

Tribological properties of biocompatible Ti–10W and Ti–7.5TiC–7.5W

786

Tribological properties of bronze–graphite composites under sea water condition

787

Tribological properties of bulk metallic glasses

788

Tribological properties of bulk metallic glasses

789

Tribological properties of carbon nanotube bundles predicted from atomistic simulations

790

Tribological properties of carbon nanotube-doped carbon/carbon composites

791

Tribological properties of carbon/carbon composites under different braking pressures

792

Tribological properties of carbon/carbon composites with various pyrolytic carbon microstructures

793

Tribological properties of chemically bonded polyimide films on silicon with polyglycidyl methacrylate brush as adhesive layer

794

Tribological properties of commercial optical disks estimated from nanoindentation and scratch techniques

795

Tribological properties of composite Ti(N,O,C) coatings containing hard amorphous carbon layers

796

Tribological properties of copper alloy-based composites reinforced with tungsten carbide particles

797

Tribological properties of copper/carbon films formed by microwave plasma-assisted deposition techniques

798

Tribological properties of Cr- and Ti-doped MoS2 composite coatings under different humidity atmosphere

799

Tribological Properties of CrN Coated H13 Grade Tool Steel Original Research Article

800

Tribological properties of CrSiN-coated 301 stainless steel under wet and dry conditions

801

Tribological properties of CrZr–Si–N films synthesized using Cr–Zr–Si segment targets

802

Tribological properties of Cu-based composites and in situ synthesis of TiN/TiB2

803

Tribological properties of Cu-La2O3 composite under different electrical currents

804

Tribological properties of diamond and SiO2 nanoparticles added in paraffin

805

Tribological properties of dimpled silicon nitride under oil lubrication

806

Tribological properties of DLC coatings and comparison with test results: Development of a database

807

Tribological properties of DLC films against different steels

808

Tribological properties of DLC films deposited under various conditions using a plasma-enhanced CVD

809

Tribological properties of duplex Cr–Si–N coatings on SS410 steel

810

Tribological properties of duplex MAO/DLC coatings on magnesium alloy using combined microarc oxidation and filtered cathodic arc deposition

811

Tribological properties of duplex plasma oxidised, nitrided and PVD coated Ti–6Al–4V

812

Tribological properties of duplex treated TiN/TiCN coatings on plasma nitrided PH15-5 steel

813

Tribological properties of electroless Ni-P/diamond composite films

814

Tribological properties of epoxy nanocomposites: I. Enhancement of the wear resistance by nano-TiO2 particles

815

Tribological properties of epoxy nanocomposites: Part II. A combinative effect of short carbon fibre with nano-TiO2

816

Tribological properties of epoxy/rubber nanocomposites

817

Tribological properties of Fe and Ni base alloys after low energy nitrogen bombardment

818

Tribological properties of Fe3Al material under water environment

819

Tribological properties of Fe3Al–Fe3AlC0.5 composites under dry sliding

820

Tribological properties of Fe7Mo6-based alloy under two ionic liquid lubrications

821

Tribological properties of Fe7Mo6-based-alloy lubricated with poly-alpha-olefin containing PN additive

822

Tribological properties of FeAl intermetallics under dry sliding

823

Tribological properties of FeCl3-graphite intercalation compound rubbed film on steel

824

Tribological properties of femur–tibia articulation of lubber grasshopper

825

Tribological properties of flame sprayed Fe–Ni–RE alloy coatings under reciprocating sliding

826

Tribological properties of fluid phase phospholipid bilayers

827

Tribological properties of fluorinated nanocarbons with different shape factors

828

Tribological properties of fluorine-containing additives of silicone oil

829

Tribological properties of graphite- and ZrC-reinforced bulk metallic glass composites

830

Tribological properties of graphite-like and diamond-like carbon coatings

831

Tribological properties of graphite-like carbon coatings coupling with different metals in ambient air and water

832

Tribological properties of graphitic nanoparticles produced by laser vaporization of graphite in nitrogen Original Research Article

833

Tribological properties of hard a-C:H:F coatings

834

Tribological properties of hardened high strength Boron steel at combined rolling and sliding condition

835

Tribological properties of heat-treated electroless Ni–P coatings on AZ91 alloy

836

Tribological properties of high temperature resistant polymer composites with fine particles

837

Tribological properties of high temperature self-lubrication metal ceramics with an interpenetrating network

838

Tribological properties of hot-pressed alumina–CNT composites

839

Tribological Properties of Hybrid Process DLC Coating against Magnesium Alloy

840

Tribological properties of ion implanted UHMWPE against Si3N4 under different lubrication conditions

841

Tribological properties of ion-implanted polyphenylene oxide (PPO)

842

Tribological properties of journal bearings manufactured from particle reinforced Al composites

843

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

844

Tribological properties of laser-textured and ta-C coated surfaces with burnished WS2 at elevated temperatures

845

Tribological properties of linear phosphazene oligomers as lubricants

846

Tribological properties of low-temperature graphite fluorides. Influence of the structure on the lubricating performances Original Research Article

847

Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles

848

Tribological properties of magnetite precipitate from oxide scale in hot-rolled microalloyed steel

849

Tribological properties of magnetron-sputtered TiC coatings

850

Tribological properties of magnetron-sputtered TiC coatings

851

Tribological properties of metal doped a-C film by RF magnetron sputtering method

852

Tribological properties of Mn–Zn–Fe magnetic fluids under magnetic field

853

Tribological properties of modified carbon fabric/polytetrafluoroethylene composites

854

Tribological properties of molybdenized silver-containing nickel base alloy at elevated temperatures

855

Tribological properties of molybdenum coatings sprayed by electro-thermal explosion directional spraying

856

Tribological properties of molybdenum disulfide nanosheets by monolayer restacking process as additive in liquid paraffin

857

Tribological properties of MoN layer on silver-containing nickel-base alloy at high temperatures

858

Tribological properties of monolayer graphene oxide sheets as water-based lubricant additives

859

Tribological properties of MoS2 and carbon fiber reinforced polyimide composites

860

Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer self-lubrication bearing materials

861

Tribological properties of MoSi2–MoS2 coatings coupling with SAE 52100 steel under reciprocating sliding

862

Tribological properties of N+ ion implanted ultrananocrystalline diamond films

863

Tribological properties of nanoporous anodic aluminum oxide film

864

Tribological properties of nanoscale GeSb2Te4 film in the ambient air

865

Tribological properties of nanostructured DLC coatings deposited by C60 ion beam

866

Tribological properties of nanostructured WC/CoNi and WC/CoNiP coatings produced by electro-deposition

867

Tribological properties of nanostructured zirconia coatings deposited by plasma spraying

868

Tribological properties of nc-TiC/a-C:H coatings prepared by magnetron sputtering at low and high ion bombardment of the growing film

869

Tribological properties of Ni-17.5Si-29.3Cr alloy at room and elevated temperatures

870

Tribological properties of Ni3Al produced by pressure-assisted volume combustion synthesis

871

Tribological properties of Ni3Al-Cr7C3 composite coating under water lubrication

872

Tribological properties of Ni3Al–Cr7C3 composite coatings under liquid paraffin lubrication

873

Tribological properties of NiAl produced by pressure-assisted combustion synthesis

874

Tribological properties of Ni-based self-lubricating composites with addition of silver and molybdenum disulfide

875

Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection

876

Tribological properties of NiCr–Al2O3 cermet-based composites with addition of multiple-lubricants at elevated temperatures

877

Tribological properties of N-isopropylacrylamide as studied by scanning force microscopy

878

Tribological properties of nitrogen ion implanted steel

879

Tribological properties of oleic acid — modified TiO2 nanoparticle in water

880

Tribological properties of oleic acid — modified TiO2 nanoparticle in water

881

Tribological properties of perfluoralkylethyl methacrylate-polymethyl methacrylate copolymer thin films

882

Tribological properties of pitch-based 2-D carbon–carbon composites Original Research Article

883

Tribological properties of plasma and HVOF-sprayed NiCrBSi–Fe2O3 composite coatings

884

Tribological properties of plasma nitrided and hard coated AISI 4140 steel

885

Tribological properties of plasma nitrided stainless steel against SAE52100 steel under ionic liquid lubrication condition

886

Tribological properties of plasma sprayed Al/Al2O3 composite coatings

887

Tribological properties of plasma sprayed alumina–titania coatings: role and control of the microstructure

888

Tribological properties of plasma sprayed and laser remelted 75/25 Cr3C2/NiCr coatings

889

Tribological properties of poly(amide amine) and small molecule composite self-assembled monolayers: Influence of functional group of small molecule

890

Tribological Properties of Poly(vinyl alcohol) Hydrogel in Response to Ceramic Femoral Component

891

Tribological properties of polymer/silica composite coatings for microsystems applications

892

Tribological properties of polymer-based journal bearings

893

Tribological properties of polymer-sheet-adhered metal hybrid gear

894

Tribological properties of powder metallurgy – Processed aluminium self lubricating hybrid composites with SiC additions

895

Tribological properties of pressureless sintered advanced alumina matrix ceramic materials improved by Al–Ti–B and diopside

896

Tribological properties of pressureless sintered alumina matrix ceramic materials improved by diopside

897

Tribological properties of PTFE composites filled with surfacetreated carbon fiber

898

Tribological properties of pulsed laser deposited DLC/TM (TM=Cr, Ag, Ti and Ni) multilayers

899

Tribological properties of pulsed laser deposited Mo–S–Te composite films at moderate high temperatures

900

Tribological properties of PVD tool coatings in forming operations of steel sheet

901

Tribological properties of radiation cross-linked polytetrafluoroethylene sheets

902

Tribological properties of rare earth oxide added Cr3C2–NiCr coatings

903

Tribological properties of segment-structured diamond-like carbon films

904

Tribological properties of selected PVD coatings when slid against ductile materials

905

Tribological properties of self-assembled monolayers covalently bonded to Si

906

Tribological properties of self-assembled monolayers of fluorocarbon and hydrocarbon thiols and disulfides on Au(111) studied by scanning force microscopy

907

Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO3 nanowires

908

Tribological properties of serpentine, La(OH)3 and their composite particles as lubricant additives

909

Tribological properties of short glass fiber reinforced polyamide 12 sliding on medium carbon steel

910

Tribological properties of Si3N4–graphene nanocomposites

911

Tribological properties of Si-containing diamond-like carbon film under ATF lubricated condition

912

Tribological properties of silicate materials on nano and microscale

913

Tribological properties of silicon nitride ceramics modified by ion implantation

914

Tribological properties of silver- and copper-doped transition metal oxide coatings

915

Tribological properties of smooth diamond films

916

Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites

917

Tribological properties of solid lubricants (graphite, Sb2S3, MoS2) for automotive brake friction materials

918

Tribological properties of solid lubricants filled glass fiber reinforced polyamide 6 composites

919

Tribological properties of solid multilayer composite coatings in dry rolling contact

920

Tribological properties of solid-lubricating coatings on cylinder bore at low temperature

921

Tribological properties of some phenolic composites suggested for automotive brakes

922

Tribological properties of spark-plasma-sintered ZrO2(Y2O3)–CaF2–Ag composites at elevated temperatures

923

Tribological properties of sprayed alumina coatings sealed by electro-deposition of Cu

924

Tribological properties of sputter deposited ZrN coatings on titanium modified austenitic stainless steel

925

Tribological properties of sputtered CrN coatings under dry sliding oscillation motion at elevated temperatures

926

Tribological properties of structural steel modified by fine particle bombardment (FPB) and diamond-like carbon hybrid surface treatment

927

Tribological properties of sulfur-implanted steel

928

Tribological properties of surface dimple-textured by pellet-pressing

929

Tribological properties of surface-modified Pd nanoparticles for electrical contacts

930

Tribological properties of the film formed by borated dioctyl dithiocarbamate as an additive in liquid paraffin

931

Tribological properties of the low-carbon steels with different micro-structure processed by heat treatment and severe plastic deformation

932

Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics

933

Tribological properties of the surface of railway tracks, studied by indentation technique

934

Tribological properties of the Ti–Al–N thin films with different components fabricated by double-targeted co-sputtering

935

Tribological properties of the two-step thermally deposited chromium films

936

Tribological properties of thermal-sprayed Magnéli-type coatings with different stoichiometries (TinO2n−1)

937

Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated conditions

938

Tribological properties of Ti40Zr25Ni8Cu9Be18 bulk metallic glasses under different conditions

939

Tribological properties of Ti-aluminide reinforced Al-based in situ metal matrix composite

940

Tribological properties of TiB2 and TiB2–MoSi2 ceramic composites

941

Tribological properties of Ti-based alloys in a simulated bone–implant interface with Ringer’s solution at fretting contacts

942

Tribological properties of Ti-doped DLC coatings under ionic liquids lubricated conditions

943

Tribological properties of TiSiN thin films deposited by laser ablation

944

Tribological properties of titania nanofilms coated on glass surface by the sol–gel method

945

Tribological properties of titanium aluminides coatings produced on pure Ti by laser surface alloying

946

Tribological properties of tribofilms formed from ZDDP in DLC/DLC and DLC/steel contacts

947

Tribological properties of trichlorosilane-based one- and two-component self-assembled monolayers

948

Tribological properties of ultra nanocrystalline diamond film-effect of sliding counterbodies

949

Tribological properties of ultrananocrystalline diamond and diamond nanorod films

950

Tribological properties of ultrananocrystalline diamond films in various test atmosphere

951

Tribological properties of ultra-thin ionic liquid films on single-crystal silicon wafers with functionalized surfaces

952

Tribological properties of unbalanced magnetron sputtered nano-scale multilayer coatings TiAlN/VN and TiAlCrYN deposited on plasma nitrided steels

953

Tribological properties of WC and CeO2 particles reinforced in-situ synthesized NiAl matrix composite coatings at elevated temperature

954

Tribological properties of WS2 nanoparticles under mixed lubrication

955

Tribological properties of Zr61Ti2Cu25Al12 bulk metallic glass under simulated physiological conditions

956

Tribological properties of ZrO2 (Y2O3)–Mo–BaF2/CaF2 composites at high temperatures

957

Tribological properties of γ-Y2Si2O7 ceramic against AISI 52100 steel and Si3N4 ceramic counterparts

958

Tribological properties, phase generation and high temperature phase stability of tungsten- and vanadium-oxides deposited by reactive MSIP-PVD process for innovative lubrication applications

959

Tribological property of in situ directly nitrided and sintered Al/AlN composite

960

Tribological property of plain bearing with low frictional layer

961

Tribological reactions between oil additives and DLC coatings for automotive applications

962

Tribological response of sterilized and un-sterilized orthodontic wires

963

Tribological responses of Phenolphthalein Poly (ether sulfone) on proton irradiation

964

Tribological running-in investigation and surface analysis of copper coats made by electro-impulsive spraying

965

Tribological rutile-TiO2 coating on aluminium alloy

966

Tribological screening tests for the selection of raw materials for automotive brake pad formulations

967

Tribological Size Effects in Sheet Metal Forming Measured by a Strip Drawing Test

968

Tribological stability of Al2O3 short fiber reinforced high Cr cast irons

969

Tribological studies of 1-alkyl-2,5-dithiohydrazodicarbonamides and their Mo–S complexes as EP and multifunctional additives

970

Tribological studies of a Zr-based bulk metallic glass

971

Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers

972

Tribological studies of polymer based ceramic–metal composites processed at ambient temperature

973

Tribological studies of potential vegetable oil-based lubricants containing environmentally friendly viscosity modifiers

974

Tribological studies of rhenium doped fullerene-like MoS2 nanoparticles in boundary, mixed and elasto-hydrodynamic lubrication conditions

975

Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants

976

Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors

977

Tribological studies of Zr-implanted PVD TiN coatings deposited on stainless steel substrates

978

Tribological studies on a novel borate ester containing benzothiazol-2-yl and disulfide groups as multifunctional additive

979

Tribological studies on microwave sintered copper–carbon nanotube composites

980

Tribological studies on polyetherimide composites based on carbon fabric with optimized oxidation treatment

981

Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate

982

Tribological study of elastomeric bearings for marine propeller shaft system

983

Tribological study of Fe–Cu–Cr–graphite alloy and cast iron railway brake shoes by pin-on-disc technique

984

Tribological study of gray cast iron with automotive brake linings: The effect of rotor microstructure

985

Tribological study of high bearing blended polymer-based coatings for air-conditioning and refrigeration compressors

986

Tribological study of NiCrBSi coating obtained by different processes

987

Tribological study of novel S–N style 1,3,4-thiadiazole-2-thione derivatives in rapeseed oil

988

Tribological study of peroxide-cured EPDM rubber filled with electron beam irradiated PTFE powder

989

Tribological study of trioctylthiotriazine derivative as lubricating oil additive

990

Tribological study on hydrostatic slipper bearing with annular orifice damper for water hydraulic axial piston motor

991

Tribological surfaces of organic brake pads

992

Tribological system modelling and simulation in metal forming processes

993

Tribological testing of articular cartilage of the medial compartment of the knee using a friction simulator

994

Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings — Evaluation of galling and wear characteristics against different high strength steels

995

Tribological testing of peroxide-cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel

996

Tribological testing of self-mated nanocrystalline diamond coatings on Si3N4 ceramics

997

Tribological testing of some potential PVD and CVD coatings for steel wire drawing dies

998

Tribological texturing of steel surfaces with a novel diamond embossing tool technique

999

Tribological wear behavior of diamond reinforced composite coating

1000

Tribological, anti-corrosive properties and biocompatibility of the micro- and nano-crystalline diamond coated Ti6Al4V