بر اساس عنوان

1
Thermal adaptation in the built environment: a literature review
2
Thermal Adaptation of the Yeast Mitochondrial Hsp70 System is Regulated by the Reversible Unfolding of its Nucleotide Exchange Factor
3
Thermal adaptations in deep-sea hydrothermal vent and shallow-water shrimp
4
Thermal adaptive implicit method: Time step selection
5
Thermal AFM: a thermopile case study
6
Thermal AFM: a thermopile case study
7
Thermal AFM: a thermopile case study
8
Thermal ageing of electrical conductivity in carbon nanotube/polyaniline composite films Original Research Article
9
Thermal ageing of nanostructured tetragonal zirconia ceramics: Characterization of interfaces
10
Thermal ageing of poly(ethylene oxide)/poly(3,4-ethylenedioxythiophene) semi-IPNs
11
Thermal ageing of rocket propellant formulations containing ε-HNIW (ε-CL20) investigated by heat generation rate and mass loss
12
Thermal ageing on the microstructure and mechanical properties of Al–Cu–Mg alloy/bagasseash particulate composites
13
Thermal ageing process at laboratory scale to evaluate the lifetime of Liquefied Natural Gas storage and loading/unloading materials
14
Thermal agglomeration of chocolate drink powder Original Research Article
15
Thermal aggregation and gelation of kidney bean (Phaseolus vulgaris L.) protein isolate at pH 2.0: Influence of ionic strength
16
Thermal aggregation of almond protein isolate
17
Thermal aggregation of bovine serum albumin studied by asymmetrical flow field-flow fractionation Original Research Article
18
Thermal aggregation of egg white proteins as affected by saccharides
19
Thermal aggregation of globulin from an indigenous Chinese legume, Phaseolus angularis (red bean)
20
Thermal aggregation of hen egg white lysozyme: effect of polyamines
21
Thermal aggregation of methylcellulose with different molecular weights
22
Thermal aggregation of whey proteins in the presence of buttermilk concentrate Original Research Article
23
Thermal aggregation of α-chymotrypsin: Role of hydrophobic and electrostatic interactions Original Research Article
24
Thermal aggregation of β-lactoglobulin in presence of metal ions Original Research Article
25
Thermal aggregation properties of whey protein glycated with various saccharides
26
Thermal aggregation, amino acid composition and in vitro digestibility of vicilin-rich protein isolates from three Phaseolus legumes: A comparative study
27
Thermal aging and reduced hydrophobic recovery of polydimethylsiloxane
28
Thermal aging behavior of plasma sprayed LaMgAl11O19 thermal barrier coating
29
Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications
30
Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel Original Research Article
31
Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites
32
Thermal aging effects on the mechanical properties of as-cast Ni3Al-based alloy
33
Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy
34
Thermal aging effects on the microstructure of Nb-bearing nickel based superalloy weld overlays using ultrasound techniques
35
Thermal aging of carbon black filled rubber compounds. I. Experimental evidence for bridging flocculation
36
Thermal aging of silica gels in water
37
Thermal aging of single-layer polymer light-emitting diodes composed of a carbazole and oxadiazole containing copolymer doped with singlet or triplet emitters
38
Thermal air oxidation of copper in an applied electric field
39
Thermal alteration of asteroids: evidence from meteorites
40
Thermal Alteration of Buried Bone
41
Thermal alteration of nontronite and montmorillonite: Implications for the martian surface
42
Thermal alteration of organic matter during a shrubland fire: A field study
43
Thermal amplitudes in DLCQ superstrings on pp-waves Original Research Article
44
Thermal analyses and simulations of the type A and type B Portevin–Le Chatelier effects in an Al–Mg alloy Original Research Article
45
Thermal analyses for the design of the ITER-NBI arc driven ion source
46
Thermal analyses of commercial magnesium stearate pseudopolymorphs
47
Thermal analyses of selected soil samples from the tombs at the Tianma-Qucun site, Shanxi, China
48
Thermal analyses to assess diffusion kinetics in the nano-sized interspaces between the growing crystals of a glass ceramics
49
Thermal Analysis — Fundamentals and Applications to Polymer Science, 2nd Edition, Edited by T. Hatakeyama and F.X. Quinn, Wiley, Chichester, 1999, viii+180 pages. ISBN 0-471-98362-4; £55.00
50
Thermal analysis — review and prospect
51
Thermal analysis (TG–DTA) and isotopic characterization (13C–15N) of humic acids from different origins
52
Thermal analysis and 454 pyrosequencing to evaluate the performance and mechanisms for deep stabilization and reduction of high-solid anaerobically digested sludge using biodrying process
53
Thermal analysis and alloy phase diagrams
54
Thermal analysis and annealing temperature dependence of electrical properties in Sn10Sb20Se70 glassy semiconductor
55
Thermal analysis and archaeological chronology: The ancient mortars of the site of Baradello (Como, Italy)
56
Thermal analysis and calorimetry
57
Thermal analysis and calorimetry beyond 2000: challenges and new routes
58
Thermal analysis and characterisation of cellulose grafted with acrylic monomers
59
Thermal analysis and characterisation of cellulose oxidised with sodium methaperiodate
60
Thermal analysis and design of a multi-layered rigidity tunable composite
61
Thermal analysis and design of a solar prototype for high-temperature processes
62
Thermal analysis and design of solid energy storage systems using a modified lumped capacitance method
63
Thermal analysis and design of the aerial camera’s primary optical system components
64
Thermal analysis and devolatilization kinetics of cotton stalk, sugar cane bagasse and shea meal under nitrogen and air atmospheres
65
Thermal analysis and exergy evaluation of packed bed thermal storage systems
66
Thermal analysis and FTIR studies of sewage sludge produced in treatment plants. The case of sludge in the city of Uberlândia-MG, Brazil
67
Thermal analysis and gas chromatography coupled mass spectrometry analyses of hydroxypropyl-β-cyclodextrin inclusion complex containing Lippia gracilis essential oil
68
Thermal analysis and gas chromatography coupled mass spectrometry analyses of hydroxypropyl-β-cyclodextrin inclusion complex containing Lippia gracilis essential oil
69
Thermal analysis and heat capacities of pyridinium and imidazolium ionic liquids
70
Thermal analysis and in vitro bioactivity of bioactive glass–alumina composites
71
Thermal analysis and infrared emission spectroscopic study of halloysite–potassium acetate intercalation compound
72
Thermal analysis and its application in evaluation of fluorinated polyimide membranes for gas separation
73
Thermal analysis and kinetic modeling of manganese oxide ore reduction using biomass straw as reductant
74
Thermal analysis and kinetics of biomass samples
75
Thermal Analysis and Kinetics of the Precipitation in Wrought Al-Mg, Al-Mg-Sc and Al-Mg-Sc-Me (Me=Zr, Ti) Alloys
76
Thermal analysis and measurement of a solar pond prototype to study the non-convective zone salt gradient stability
77
Thermal analysis and mechanism of α-Zn2SiO4:Mn2+ formation from zinc oxalate dihydrate under hydrothermal conditions
78
Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg
79
Thermal Analysis and Microstructural Evaluation of Inconel 738LC Superalloy Gas Turbine Blade
80
Thermal analysis and microstructure of the as-cast Ag–Bi–Cu alloys
81
Thermal analysis and modeling of a notebook computer battery
82
Thermal analysis and new insights to support decision making in retrofit and relaxation of heat exchanger networks
83
Thermal analysis and Ohmic loss estimation of polarizer for ITER ECCD system
84
Thermal analysis and optimization of a portable, edge-air-cooled PEFC stack
85
Thermal Analysis and Performance of Double Glazing Window with Semi-transparent Photovoltaic Module
86
Thermal analysis and performance optimization of a solar hot water plant with economic evaluation
87
Thermal analysis and performance optimization of a solar water heater flat plate collector: Application to Tétouan (Morocco)
88
Thermal analysis and performance study for multilayer perforated insulation material used in space
89
Thermal analysis and phase behavior of poly(styrene-co-4-vinylpyridine)/poly(styrene-co-acrylic acid) mixtures
90
Thermal analysis and phase diagram of the LiF–BiF3 system
91
Thermal analysis and phase evolution of ferroelectric PbTiO3 obtained from silicate and borate based glasses
92
Thermal analysis and physiological behavior of cellulose/pectin complex from Canna edulis Ker by-product
93
Thermal analysis and prediction of phase equilibria in the TiO2–Bi2O3 system
94
Thermal analysis and products distribution of dried sewage sludge pyrolysis
95
Thermal analysis and products distribution of dried sewage sludge pyrolysis
96
Thermal analysis and Raman scattering study on crystallization and structure of Agx(As0.4Se0.6)100−x glasses
97
Thermal analysis and Raman spectroscopic studies of crystallization in poly(ethylene 2,6-naphthalate)
98
Thermal analysis and safety information for metal nanopowders by DSC
99
Thermal analysis and solidification pathways of Mg–Al–Ca system alloys
100
Thermal analysis and solid-state 13C NMR study of crosslink in polyimides containing acetylene groups in the main chain
101
Thermal analysis and spectroscopic characteristics of tetrabutylammonium tetrachloroferrate(III)
102
Thermal analysis and temperature-programmed reduction studies of copper–zirconium and copper–zirconium–yttrium compounds
103
Thermal analysis and theoretical study of α-cyclodextrin azomethine [2]-rotaxane formation by semi-empirical method PM3
104
Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au–Ga–Sb system Original Research Article
105
Thermal analysis and vapour pressure of a new series of tungsten(VI) oxo-alkoxide-β-ketoesterate complex precursors for the chemical vapour deposition of tungsten oxide
106
Thermal analysis and vapour pressure of a new series of tungsten(VI) oxo-alkoxide-β-ketoesterate complex precursors for the chemical vapour deposition of tungsten oxide
107
Thermal analysis and vibrational spectroscopy of Mn(II)–urea–halide complexes: comparative study of the metal–ligand bond strength
108
Thermal Analysis and X-Ray Diffraction Studies of Bis (Benzoyl Acetonato) Copper (II) Complex
109
Thermal Analysis and X-Ray Diffraction Study on LiKSO4: A New Phase Transition
110
Thermal analysis as a screening technique for the characterization of babassu flour and its solid fractions after acid and enzymatic hydrolysis
111
Thermal analysis behavior of β- and γ-cyclodextrin inclusion complexes with capric and caprilic acid
112
Thermal analysis characterization of promoted vanadium oxide-based catalysts
113
Thermal Analysis Circular Couette Flow of Non-Newtonian Fluid with Viscous Dissipation
114
Thermal analysis during solidification of cast Al–Si alloys
115
Thermal analysis for folded solar array of spacecraft in orbit
116
Thermal analysis for ion-exchange column system
117
Thermal analysis for system uses solar energy as a pressure source for reverse osmosis (RO) water desalination
118
Thermal analysis for the characterisation of grounds used in works of art: preliminary results
119
Thermal analysis for the evaluation of the organic matter evolution during municipal solid waste aerobic composting process
120
Thermal analysis for transient radiative cooling of a conducting semitransparent layer of ceramic in high-temperature applications
121
Thermal analysis for wire scanners in the CSNS Linac
122
Thermal analysis for wire scanners in the CSNS Linac
123
Thermal analysis in coated cutting tools
124
Thermal analysis in cultural heritage safeguard: an application
125
Thermal analysis in fluidized bed drying of moist particles
126
Thermal analysis in matrix acidization
127
Thermal Analysis Investigation of Dapoxetine and Vardenafil Hydrochlorides using Molecular Orbital Calculations
128
Thermal analysis of a building brick containing phase change material
129
Thermal analysis of a calcium fructoborate sample
130
Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method
131
Thermal analysis of a combustion chamber surrounded by deposits in an HCCI engine
132
Thermal analysis of a constructal T-shaped porous fin with radiation effects
133
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field
134
Thermal analysis of a diesel engine operating with diesel–biodiesel blends
135
Thermal analysis of a direct-gain room with shape-stabilized PCM plates
136
Thermal analysis of a double layer phase change material floor
137
Thermal analysis of a glass bending process
138
Thermal analysis of a hybrid solar energy saving system inside a greenhouse
139
Thermal analysis of a longitudinal fin with variable thermal properties by recursive formulation
140
Thermal analysis of a longitudinal trapezoidal fin with temperature-dependent thermal conductivity and heat transfer coefficient
141
Thermal analysis of a low flow piezoelectric air pump
142
Thermal analysis of a low temperature storage unit using phase change materials without refrigeration system
143
Thermal analysis of a magnesium oxide/water chemical heat pump for cogeneration
144
Thermal analysis of a metal foam subject to jet impingement
145
Thermal analysis of a natural circulation solar air heater with phase change material energy storage
146
Thermal analysis of a new concept in a household clothes tumbler dryer
147
Thermal analysis of a partially ceramic coated piston: Effect on cold start HC emission in a spark ignition engine
148
Thermal analysis of a polymorphic azo dye derived from 2-amino-5-nitrothiazole
149
Thermal analysis of a prototype to determine radiative cooling thermal balance
150
Thermal analysis of a rotary regenerator with fixed pressure drop or fixed pumping power
151
Thermal analysis of a run-capacitor single-phase induction motor
152
Thermal analysis of a simulated CANDU 37-element spent fuel bundle with air backfill
153
Thermal analysis of a simulated CANDU 37-element spent fuel bundle with air backfill Original Research Article
154
Thermal analysis of a solid brake disc
155
Thermal analysis of a solid polymer electrolyte and a subsequent electrochemical investigation of a lithium polymer battery
156
Thermal analysis of a stoneware panel covering radiators
157
Thermal analysis of a tunnel kiln used to produce roof tiles
158
Thermal analysis of a weir-type cascade solar still integrated with PCM storage Original Research Article
159
Thermal analysis of a wet-disk clutch subjected to a constant energy engagement
160
Thermal analysis of a wooden door system with integrated vacuum insulation panels
161
Thermal analysis of above-grade wall assembly with low emissivity materials and furred airspace
162
Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid
163
Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid
164
Thermal analysis of activated carbons modified with silver metavanadate
165
Thermal analysis of adsorptive natural gas storages during dynamic charge phase at room temperature
166
Thermal analysis of air-cooled PEM fuel cells
167
Thermal analysis of AlGaN-GaN power HFETs
168
Thermal analysis of ammonium dinitramide (ADN)
169
Thermal analysis of ammonium trioxalatometallate complexes supported on titania and reducibility of their decomposition products
170
Thermal analysis of an annular fin with (a) simultaneously imposed base temperature and base heat flux and (b) fixed base and tip temperatures
171
Thermal analysis of an electrical machine taking into account the iron losses and the deep-bar effect
172
Thermal analysis of an enriched flame incinerator for aqueous residues
173
Thermal analysis of an SI engine piston using different combustion boundary condition treatments
174
Thermal analysis of azoic dyes: Part I. Non-isothermal decomposition kinetics of [4-(4-chlorobenzyloxy)-3-methylphenyl](p-tolyl)diazene in dynamic air atmosphere
175
Thermal analysis of bicomponent fibres
176
Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique
177
Thermal analysis of bis(tetraethylammonium) tetrachloroferrate(II)
178
Thermal analysis of bone cement polymerisation at the cement–bone interface
179
Thermal analysis of borogypsum and its effects on the physical properties of Portland cement
180
Thermal analysis of brominated pitch-based carbon fibers
181
Thermal analysis of buildings in a mathematical programming environment and applications
182
Thermal analysis of bulk carbon–carbon composite and friction products derived from it during simulated aircraft braking Original Research Article
183
Thermal analysis of carbon fiber polymer-matrix composites by electrical resistance measurement
184
Thermal analysis of carbon nanotube film irradiated by a pulsed laser
185
Thermal analysis of carbon-nanotube composites using a rigid-line inclusion model by the boundary integral equation method
186
Thermal analysis of cast-resin dry-type transformers
187
Thermal analysis of chemically and mechanically modified pectins
188
Thermal analysis of chitosan and its blends
189
Thermal Analysis of Chitosan Based Networks
190
Thermal analysis of closed feedwater heaters in nuclear power plants
191
Thermal Analysis of CNT-Based Nano-Composites by Element Free Galerkin Method
192
Thermal analysis of compact solar water heater under local climatic conditions
193
Thermal analysis of complex relaxation processes in poly(desaminotyrosyl-tyrosine arylates)
194
Thermal analysis of composite solar array subjected to space heat flux
195
Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
196
Thermal analysis of cooling coils based on a dynamic model
197
Thermal analysis of cryopreserved Hypericum perforatum L. shoot tips: Cooling regime dependent dehydration and ice growth
198
Thermal analysis of cyclodextrins and their inclusion compounds
199
Thermal analysis of cylinder head carbon deposits from single cylinder diesel engine fueled by palm oil–diesel fuel emulsions
200
Thermal Analysis of Discrete Water supply in Domestic Hot Water Storage Tank
201
Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
202
Thermal analysis of dry sleeve bearings — a comparison between analytical, numerical (finite element) and experimental results
203
Thermal analysis of electron gun for travelling wave tubes
204
Thermal analysis of energy crops: Part I: The applicability of a macro-thermobalance for biomass studies
205
Thermal analysis of energy crops: Part I: The applicability of a macro-thermobalance for biomass studies
206
Thermal analysis of flaxseed (Linum usitatissimum) proteins by differential scanning calorimetry
207
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces
208
Thermal analysis of fractures at Cerberus Fossae, Mars: Detection of air convection in the porous debris apron
209
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam
210
Thermal analysis of friction welding process in relation to the welding of YSZ-alumina composite and 6061 aluminum alloy
211
Thermal analysis of FRP chimneys using consistent laminated shell element
212
Thermal analysis of functionally graded coating AlSi alloy and steel pistons
213
Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
214
Thermal analysis of GFRP-reinforced continuous concrete decks subjected to top fire
215
Thermal Analysis of Grinding
216
Thermal analysis of ground dolomite, confirmation of results using an X-ray powder diffraction methodology
217
Thermal analysis of ground floor
218
Thermal analysis of halotrichites
219
Thermal analysis of heat pipes during thermal storage
220
Thermal analysis of high power GaN-based LEDs with ceramic package
221
Thermal analysis of high temperature ZrO2 insulation ceramic coatings on Ag tapes used as sheath of Bi-2212 superconducting materials using finite element method
222
Thermal analysis of high-frequency transformers using finite elements coupled with temperature rise method
223
Thermal analysis of hydration heat in concrete structures with pipe-cooling system
224
Thermal analysis of including phase change material in a domestic hot water cylinder
225
Thermal analysis of indirect geothermal district heating systems
226
Thermal Analysis of Induction and Synchronous Reluctance Motors
227
Thermal analysis of induction heating roll with heat pipes
228
Thermal analysis of insulations used in the building shell with the optimization approach and reduction of energy consumption
229
Thermal analysis of integrated spiral inductors
230
Thermal analysis of K(x)/La2O3, active catalysts for the abatement of diesel exhaust contaminants
231
Thermal analysis of kinetics of coal oxidation
232
Thermal analysis of La–Ba oxalate and role of γ-irradiation there on
233
Thermal analysis of large pore microporous zincophosphates
234
THERMAL ANALYSIS OF LASER HARDENING FOR DIFFERENT MOVING PATTERNS
235
Thermal analysis of layer formation in a stepless rapid prototyping process
236
Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution
237
Thermal analysis of lead-acid battery pastes and active materials
238
Thermal analysis of LED array system with heat pipe
239
Thermal analysis of Li2O TeO2 glass
240
Thermal analysis of lithium-ion batteries
241
Thermal analysis of locomotive wheel-mounted brake disc
242
Thermal analysis of loop heat pipe used for high-power LED
243
Thermal analysis of manganese(II) complexes of general formula (Bu4N)2[MnBrnCl4−n]
244
Thermal analysis of manganese(II) complexes of general formula (Bu4N)2[MnBrnCl4−n]
245
Thermal analysis of manganese(II) complexes of general formula (Et4N)2[MnBrnCl4−n]
246
Thermal analysis of manganese(II) complexes of general formula (Et4N)2[MnBrnCl4−n]
247
Thermal analysis of mass concrete embedded with double-layer staggered heterogeneous cooling water pipes
248
Thermal analysis of ME—TVC+MEE desalination systems Original Research Article
249
Thermal analysis of micromirrors for high-energy applications
250
Thermal analysis of microstructural evolution of Al2O3 surface modified layers
251
Thermal analysis of microtextured journal bearing using non-Newtonian rheology of lubricant and JFO boundary conditions
252
Thermal analysis of microwave assisted bonding of poly(methyl methacrylate) substrates in microfluidic devices
253
Thermal analysis of mixtures of wheat flour and potato starches
254
Thermal analysis of monument patina containing hydrated calcium oxalates
255
Thermal analysis of multibarrier interior PM synchronous Machine using lumped parameter model
256
Thermal analysis of mumiyo, the legendary folk remedy from the Himalaya region
257
Thermal analysis of natural convection and radiation in porous fins
258
Thermal analysis of new ITER FW and divertor design during VDE energy deposition
259
Thermal Analysis of New Solar Air Heater with Inclined Perforated Absorber Plates: Experimental Study
260
Thermal analysis of non-equilibrium crystallization in undercooled liquid Pd–Cu–Ni–P
261
Thermal analysis of non-equilibrium crystallization in undercooled liquid Pd–Cu–Ni–P
262
Thermal analysis of optimally designed inclined micro heat pipes with axial solid wall conduction
263
Thermal Analysis of Organic Rankine Cycle Using Different Organic Fluids
264
Thermal analysis of orthotropic annular fins with contact resistance: A closed-form analytical solution
265
Thermal analysis of oxidised coals
266
Thermal analysis of paraffins by calorimetry
267
Thermal analysis of periodic sliding contact on a braking tribometer
268
Thermal analysis of phase change materials in the temperature range 120–150 °C
269
Thermal analysis of Pinus sylvestris L. wood samples treated with a new gel–mineral mixture of short- and long-term fire retardants
270
Thermal analysis of piston casting using 3-D finite element method
271
Thermal analysis of plasma facing components of SST-1 Tokamak by finite difference and finite element methods
272
Thermal analysis of plasma sprayed oxide coatings sealed with aluminium phosphate
273
Thermal analysis of plate condensers in presence of flow maldistribution
274
Thermal Analysis of Plunge Stage in Friction Stir Welding: Simulation and Experiment
275
Thermal analysis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide composites
276
Thermal analysis of poly(vinylidene fluoride) film
277
Thermal analysis of polymers using virtual instruments: A tool for teaching and training
278
Thermal analysis of polysiloxanes, aromatic polyimide and their blends
279
Thermal analysis of power cable systems in a trench in multi-layered soil
280
Thermal analysis of power LED employing dual interface method and water flow as a cooling system
281
Thermal analysis of PVT-HEX system: Electricity Efficiency and Air Conditioning System
282
Thermal analysis of quinolinium tetrachloroferrate(III)
283
Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎
284
Thermal analysis of rapid charging nickel/metal hydride batteries
285
Thermal analysis of RbI crystallization in the GeSe2–Sb2Se3–RbI system
286
Thermal analysis of reinforced concrete chimneys with fiberglass plastic liners in uncontrolled fires
287
Thermal analysis of reservoir structure versus capillary pumped loop
288
Thermal analysis of rotating system with porous plate using nanofluid
289
Thermal Analysis of Salt Gradient Solar Ponds with Theoretical and Experimental Concepts
290
Thermal analysis of shale oil using thermogravimetry and differential scanning calorimetry
291
Thermal analysis of shear induced crystallization by the shear flow thermal rheometer: isothermal crystallization of polypropylene
292
Thermal analysis of single-site polymers in binary blends of low-molecular-weight linear polyethylene and high-molecular-weight branched polyethylene
293
Thermal Analysis of Sintered Silver Nanoparticles Film
294
Thermal analysis of slurry ice production system using direct contact heat transfer of carbon dioxide and water mixture
295
Thermal analysis of solar parabolic trough with porous disc receiver
296
Thermal analysis of solar receiver pipes with superheated steam
297
Thermal analysis of solar thermal energy storage in a molten-salt thermocline
298
Thermal Analysis of Some Antidiabetic Pharmaceutical Compounds
299
Thermal analysis of some diclofenac salts with alkyl and alkylhydroxy amines
300
Thermal analysis of some natural polysaccharide materials by isoconversional method
301
Thermal analysis of sponge iron preheating using waste energy of EAF
302
Thermal analysis of stratum corneum of hairless mouse with attention to phase transitions near 35 °C
303
Thermal analysis of super insulated windows (numerical and experimental investigations)
304
Thermal analysis of supercritical CO2 power cycles: Assessment of their suitability to the forthcoming sodium fast reactors
305
Thermal Analysis of Superheater Platen Tubesin Boilers
306
Thermal Analysis of the Arc Welding Process: Part I. General Solutions
307
Thermal analysis of the CDF SVX II silicon vertex detector
308
Thermal analysis of the CDF SVX II silicon vertex detector
309
Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes
310
Thermal analysis of the defrost cycle in a domestic freezer
311
Thermal analysis of the designed CPC and its efficiency improvement by MPPT control
312
Thermal analysis of the droplet solidification in the PGSS-process
313
Thermal analysis of the effect of aging on the transformation behaviour of Ti–50.9at.% Ni
314
Thermal analysis of the effect of aging on the transformation behaviour of Ti–50.9at.% Ni
315
Thermal analysis of the evaporation of compounds used in aromatherapy using thermogravimetry
316
Thermal analysis of the first canted-undulator front-end components at SSRF
317
Thermal analysis of the first canted-undulator front-end components at SSRF
318
Thermal analysis of the girth weld of an elastomeric diaphragm tank
319
Thermal analysis of the grinding process
320
Thermal Analysis of the Heater-Induced Realization of the Tin Fixed Point
321
Thermal analysis of the heating system of the Small Bath in ancient Phaselis
322
Thermal analysis of the laser surface transformation hardening process
323
Thermal analysis of the melting process in a nuclear fuel rod
324
Thermal analysis of the melting process of poly(trimethylene terephthalate) using FTIR micro-spectroscopy
325
Thermal analysis of the Mg(OH)2 dehydroxylation process at high pressures
326
Thermal analysis of the Mirnov coils of Wendelstein 7-X
327
Thermal analysis of the Na2O-rich concentration region of the quasi-binary system Na2O–SiO2
328
Thermal analysis of the oxidation of natural graphite — effect of particle size
329
Thermal analysis of the oxidation of natural graphite: isothermal kinetic studies
330
Thermal analysis of the roll in the strip casting process
331
Thermal analysis of the thermal protection system for the re-entry vehicle Original Research Article
332
Thermal analysis of the tile impacted by concentrated heat loads caused by the lost of an upstream tile
333
Thermal analysis of the volume absorber in pulsed excimer laser calorimeters
334
Thermal analysis of thin film desalination systems
335
Thermal analysis of toroidal field coil in EAST at 3.7 K
336
Thermal analysis of tungsten coating on CuCrZr with different interlayers used as EAST divertor target materials
337
Thermal analysis of underground electrical power cables buried in non-homogeneous soils
338
Thermal analysis of vacancy defects in quenched tin bronze-α
339
Thermal analysis of vaulted roofs
340
Thermal Analysis of Vertical Flow of Steam Through a Porous Media
341
Thermal analysis of washer-on-disk wear test by micro-genetic algorithm
342
Thermal analysis of wood-based test cells
343
Thermal analysis of wood–cement panels: Heat flux and indoor temperature measurements in test cells
344
Thermal analysis of YB66 crystal of BL15XU at SPring-8 by finite element method
345
Thermal analysis of YB66 crystal of BL15XU at SPring-8 by finite element method
346
Thermal analysis of β-cyclodextrin/Berberine chloride inclusion compounds
347
Thermal analysis of β-cyclodextrin/Berberine chloride inclusion compounds
348
Thermal analysis of β-lactoglobulin complexes with pectins or carrageenan for production of stable biopolymer particles
349
Thermal analysis of γ-butyrolactone + 1 butyl-3-methyl-imidazolium ionic liquids mixtures
350
Thermal analysis on detailed 3D models of ITER thermal shield
351
Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes
352
Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers
353
Thermal analysis on NAC-STC spent fuel transport cask under different transport conditions
354
Thermal analysis on nanosized TiO2 prepared by hydrolysis
355
Thermal analysis on parchments I: DSC and TGA combined approach for heat damage assessment
356
Thermal analysis on piston of marine diesel engine
357
Thermal analysis on the cooling performance of a wet porous evaporative plate for building
358
Thermal analysis on the curie temperature of nanocrystalline Ni produced by ball milling
359
Thermal analysis on the degradation of poly-silicon TFTs under AC stress
360
Thermal analysis on the process of microwave-assisted biodiesel production
361
Thermal analysis on two wheeler piston with different materials by using FEA method
362
THERMAL ANALYSIS ON VARIABLE THICKNESS ABSORBER PLATE FIN IN FLATPLATE SOLAR COLLECTORS USING DIFFERENTIAL TRANSFORM METHOD
363
THERMAL ANALYSIS STUDIES ON MULTIMETAL SULPHIDES: CHARACTERISATION, ROASTING AND LEACHING
364
THERMAL ANALYSIS STUDIES ON MULTIMETAL SULPHIDES: CHARACTERISATION, ROASTING AND LEACHING
365
Thermal analysis study of 5,10,15,20-tetrakis (methoxyphenyl) porphyrins and their nickel complexes
366
Thermal Analysis Study of Antihypertensive Drugs Telmisartan and Cilazapril
367
Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives
368
Thermal analysis, fragility and viscosity of Au-based metallic glasses
369
Thermal analysis, spectra and laser properties of a new Yb3+-doped multicomponential tellurite-based glass
370
Thermal analysis, X-ray and electron diffraction studies on crystalline phase transitions in solvent-treated poly(hexamethylene terephthalate)
371
Thermal analysis/mass spectrometry as a tool for studying environmental pollution by coal gasification
372
Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals
373
Thermal analysis: a unique method to estimate the number of substituents in fullerene derivatives
374
Thermal analysis: the next two decades
375
Thermal analysis–mass spectroscopy coupling as a powerful technique to study the growth of carbon nanotubes from benzene
376
Thermal analytical investigations of the magnesium alloys AM 60 and AZ 91 including the melting range
377
Thermal anchoring of conduction-cooled current leads for superconductivity applications near liquid nitrogen temperature
378
Thermal anchoring of wires in large scale superconducting coil test experiment
379
Thermal and 31P-NMR studies to elucidate sumatriptan succinate entrapment behavior in Phosphatidylcholine/Cholesterol liposomes. Comparative 31P-NMR analysis on negatively and positively-charged liposomes
380
Thermal and ablative properties of low temperature carbon fiber–phenol formaldehyde resin composites Original Research Article
381
Thermal and acoustic environmental requirements for green buildings in Malaysia
382
Thermal and acoustic properties of aluminium foams manufactured by the infiltration process
383
Thermal and adsorbate effects on the activity and morphology of size-selected Pdn/TiO2 model catalysts
384
Thermal and air flow characteristics in a deep pedestrian canyon under hot weather conditions
385
Thermal and antimicrobial properties of chitosan–nanocellulose films for extending shelf life of ground meat
386
Thermal and Au(I)-Catalyzed Intramolecular [4+2] Cycloaddition of Aryl-Substituted 1,6-Diynes for the Synthesis of Biaryl Compounds
387
Thermal and behavioral modeling of occupant-controlled heating, ventilating and air conditioning systems
388
Thermal and bio-disintegration properties of poly(lactic acid)/natural rubber/organoclay nanocomposites
389
Thermal and caloric equations of state for stable and metastable Lennard-Jones fluids: I. Molecular-dynamics simulations
390
Thermal and catalysed halogenation in combustion reactions
391
Thermal and catalytic conversion of asphaltenes
392
Thermal and catalytic cracking of a LDPE–EVA copolymer mixture
393
Thermal and catalytic cracking of polyethylene under mild conditions
394
Thermal and catalytic decomposition behavior of PVC mixed plastic waste with petroleum residue
395
Thermal and catalytic decomposition of aqueous ethylene glycol mixtures by film boiling
396
Thermal and catalytic decomposition of mixed plastics
397
Thermal and catalytic decomposition of polyethylene and polypropylene
398
Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes
399
Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes
400
Thermal and catalytic degradation of pyrolytic waxy oil in a plug flow reactor
401
Thermal and catalytic degradation of pyrolytic waxy oil in a plug flow reactor
402
Thermal and catalytic degradation study of polyethylene and investigation the catalytic effect of X-Zeolite and Silica-Alumina on degradation kinetic
403
Thermal and catalytic dry reforming and cracking of ethanol for hydrogen and carbon nanofilamentsʹ production
404
Thermal and catalytic formation of radicals during autoxidation
405
Thermal and catalytic isomerization of exomethylenecycloheptadienes. Experimental and theoretical studies
406
Thermal and catalytic oligomerisation of fatty acids Original Research Article
407
Thermal and catalytic pyrolysis of crosslinked polyethylene
408
Thermal and catalytic pyrolysis of Karanja seed to produce liquid fuel
409
Thermal and catalytic reactions of ethyl diazopyruvate with [60]fullerene
410
Thermal and chemical activation of fly-ash: Electrical response during early hydration
411
Thermal and chemical aging of model three-way catalyst Pd/Al2O3 and its impact on the conversion of CNG vehicle exhaust
412
Thermal and chemical approaches for oxygen catalytic recombination evaluation on ceramic materials at high temperature
413
Thermal and chemical behaviour of different glasses containing steel fly ash and their transformation into glass-ceramics
414
Thermal and chemical effects of hydrogen addition on catalytic micro-combustion of methane–air
415
Thermal and chemical equilibration of hadronic matter Original Research Article
416
Thermal and chemical events in the decomposition course of manganese compounds
417
Thermal and chemical evidence for rapid water exchange across the sediment-water interface by bioirrigation in the Indian River Lagoon, Florida
418
Thermal and chemical expansion of mixed conducting La0.5Sr0.5Fe1−xCoxO3−δ materials
419
Thermal and chemical expansion properties of La0.2Sr0.8Fe0.55Ti0.45O3−x
420
Thermal and chemical induced expansion of La0.3Sr0.7(Fe,Ga)O3−δ ceramics
421
Thermal and chemical kinetic characterization of multiphase and multicomponent substances by laser heating
422
Thermal and chemical lattice expansibility of La0.6Sr0.4Co1 − yFeyO3 − δ (y = 0.2, 0.4, 0.6 and 0.8)
423
Thermal and chemical loading effects in non selective Si/SiGe epitaxy
424
Thermal and chemical modification of bentonite for adsorption of an anionic dye
425
Thermal and chemical modification of titanium–aluminum–vanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment
426
Thermal and chemical properties of diopside-wollastonite glass-ceramics in the SiO2–CaO–MgO system from raw materials
427
Thermal and chemical reaction performance analyses of steam methane reforming in porous media solar thermochemical reactor
428
Thermal and chemical stabilities of arsenic in three Chinese coals
429
Thermal and Chemical Stability of a Spin-Coated Epoxy Adhesive for the Fabrication of a Polymer Optical Waveguide
430
Thermal and chemical stability of Cu–Zn–Cr-LDHs prepared by accelerated carbonation
431
Thermal and chemical stability of epitaxial Fe films grown on the Ti-stabilized Al(1 0 0) surface
432
Thermal and chemical stability of fluorohydroxyapatite ceramics with different fluorine contents
433
Thermal and chemical structure of the Iceland plume
434
Thermal and chemical treatment of ITO substrates for improvement of OLED performance
435
Thermal and chemical treatments of montmorillonite clay
436
Thermal and chemical variations in subcrustal cratonic lithosphere: evidence from crustal isostasy
437
Thermal and cold neutron phase-contrast radiography
438
Thermal and complex impedance analysis of amorphous and crystalline lithium salt mixtures
439
Thermal and compositional evolution of the martian mantle: Effects of phase transitions and melting
440
Thermal and compositional evolution of the martian mantle: Effects of water
441
Thermal and compositional stratification of the inner core
442
Thermal and concentration fields of burner-attached jet flames in cross flow
443
Thermal and corrosion properties of silicon nitride for copper die casting components
444
Thermal and crystalline behaviour of silk fiborin/nylon 66 blend films
445
Thermal and crystallisation behaviours of blends of polyamide 12 with styrene–ethylene/butylene–styrene rubbers
446
Thermal and crystallization behavior of hydrogen-bonded miscible blend of poly(3-hydroxybutyrate) and enzymatically polymerized polyphenol
447
Thermal and crystallization behavior of zirconia precursor used in the solution precursor plasma spray process
448
Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends
449
Thermal and crystallization kinetics of yttrium and lanthanum calcium silicate glass sealants for solid oxide fuel cells
450
Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments
451
Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office
452
Thermal and devitrification behavior of (2.5−x)CaO·(x/3)In2O3·2SiO2 glasses
453
Thermal and devitrification behavior of CaO–Ga2O3–SiO2 glasses
454
Thermal and dielectric investigations on the blends of κ-carrageenan and nano-structured polyaniline
455
Thermal and dielectric properties and curing kinetics of nanomaterials formed from poss-epoxy and meta-phenylenediamine
456
Thermal and dielectric properties of the AlN particles reinforced linear low-density polyethylene composites
457
Thermal and dielectric studies of polymer electrolyte based on P(ECH-EO)
458
Thermal and diffusion processes in laser-induced stress relaxation and reshaping of cartilage
459
Thermal and dissipative effects accompanying Lüders band propagation
460
Thermal and dissipative effects accompanying Lüders band propagation
461
Thermal and dynamic mechanical analyses on Bi0.5Na0.5TiO3–BaTiO3 ceramics synthesized with citrate method
462
Thermal and dynamic mechanical analysis of polyethylene modified with crude palm oil
463
Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres
464
Thermal and dynamic mechanical analysis of PVA/MC blend hydrogels
465
Thermal and dynamic mechanical analysis on metallocene ULDPE/PP blends to optimize impact properties
466
Thermal and dynamic mechanical behavior of polyurethanes based on diisocyanates and diethanolamine derivatives with mesogenic groups in side chain
467
Thermal and dynamic mechanical characterization of thermoplastic polyurethane/organoclay nanocomposites prepared by melt compounding
468
Thermal and dynamic mechanical properties of binary blends of bacterial copolyester poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) with poly(2-hydroxyethylmethacrylate) (PHEMA)
469
Thermal and dynamic mechanical properties of frozen wheat flour dough added with selected food gums
470
Thermal and dynamic mechanical properties of metallocene polyethylene
471
Thermal and dynamic rheology of insoluble starch from basmati rice
472
Thermal and Dynamical Particle Creation in a Curved Geometry
473
Thermal and economic comparisons of solar heating systems with seasonal storage used in building heating
474
Thermal and economic evaluation of heat recovery measures for indoor ice rinks
475
Thermal and economic optimization of an intercooler of three-stage compressor
476
Thermal and economical analysis of a central solar heating system with underground seasonal storage in Turkey
477
Thermal and economical optimization of air conditioning units with vapor compression refrigeration system
478
Thermal and electric properties of CeO2 nanoparticles dispersed in polyethylene oxide:NH4ClO4 complex
479
Thermal and electric transport properties of (60−x)V2O5–xAs2O3–20Fe2O3–10CaO–10Li2O unconventional glassy system
480
Thermal and electrical behavior of γ-Bi2VO5.5 and f-Bi2VO5 oxides obtained from mechanochemically activated precursors
481
Thermal and Electrical Characterization of (1-x)Na2O-xAl2O3-P2O5 System Glasses
482
Thermal and electrical conduction behavior of alumina and multiwalled carbon nanotube incorporated poly(dimethyl siloxane)
483
Thermal and electrical conduction in the compaction direction of exfoliated graphite and their relation to the structure
484
Thermal and electrical conduction properties of vertically aligned carbon nanotubes produced by water-assisted chemical vapor deposition Original Research Article
485
Thermal and electrical conductivities of silver–indium–tin alloys Original Research Article
486
Thermal and electrical conductivity and magnetoresistance of graphite films prepared from aromatic polyimide films
487
Thermal and electrical conductivity of Aluminium Nitride nanofluids
488
Thermal and electrical conductivity of array-spun multi-walled carbon nanotube yarns Original Research Article
489
Thermal and electrical conductivity of poly(l-lactide)/multiwalled carbon nanotube nanocomposites
490
Thermal and electrical conductivity of single- and multi-walled carbon nanotube-epoxy composites
491
Thermal and electrical conductivity of Sn–Ag–In alloys
492
Thermal and electrical conductivity of solid iron and iron–silicon mixtures at Earthʹs core conditions
493
Thermal and electrical conductivity of tall, vertically aligned carbon nanotube arrays Original Research Article
494
Thermal and electrical energy management in a PEMFC stack – An analytical approach
495
Thermal and electrical experimental characterisation of a 1 kW PEM fuel cell stack
496
Thermal and electrical performance of a water-surface floating PV integrated with a water-saturated MEPCM layer
497
Thermal and electrical performance of an alkaline fuel cell
498
Thermal and Electrical Properties of a Suspended Nanoscale Thin Film
499
Thermal and electrical properties of Czochralski grown GeSi single crystals
500
Thermal and electrical properties of graphene/carbon nanotube aerogels
501
Thermal and electrical properties of hot-pressed short pitch-based carbon fiber-reinforced ZrB2–SiC matrix composites
502
Thermal and electrical properties of mixed alkali in Li2O–Na2O–WO3–P2O5 glasses
503
Thermal and electrical properties of poly(3-alkylthiophene)s prepared by the oxidative polymerization
504
Thermal and electrical properties of poly(l-lactide)-graft-multiwalled carbon nanotube composites
505
Thermal and electrical properties of rare-earth co-doped ceria ceramics
506
Thermal and electrical properties of solid polymer electrolyte PEO9 Mg(ClO4)2 incorporating nano-porous Al2O3 filler
507
Thermal and electrical properties of starch–graphene oxide nanocomposites improved by photochemical treatment
508
Thermal and Electrical Properties of Titanium Between 300 and 1900 K
509
Thermal and electrical properties of W–Cu composite produced by activated sintering
510
Thermal and electrical switching studies on Ge20Se80 − xBix (1 ≤ x ≤ 13) ternary chalcogenide glassy system
511
Thermal and electrical transport properties of a self-organized carbon nanotube pellet
512
Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test
513
Thermal and electrochemical characterization of MCMB/LiNi1/3Co1/3Mn1/3O2 using LiBoB as an electrolyte additive
514
Thermal and Electrochemical Investigation of Neem Oil based Novel Polyurethane/Polyvinylpyrrolidone Solid Polymer Electrolytes
515
Thermal and electrochemical model of internal reforming solid oxide fuel cells with tubular geometry
516
Thermal and electrochemical stability of cathode materials in solid polymer electrolyte
517
Thermal and electrochemical stability of tungsten carbide catalyst supports
518
Thermal and electrochemical studies of carbons for Li-ion batteries: 1. Thermal analysis of petroleum and pitch cokes
519
Thermal and electrochemical studies of carbons for Li-ion batteries: 2. Correlation of active sites and irreversible capacity loss
520
Thermal and electromagnetic analysis of an electromagnetic launcher
521
Thermal and electromigration effects of electropulsing on dynamic recrystallization in Mg–3Al–1Zn alloy
522
Thermal and electronic charge transport in bulk nanostructured Zr0.25Hf0.75NiSn composites with full-Heusler inclusions
523
Thermal and electronic transport of semiconducting nanoparticle-functionalized carbon nanotubes
524
Thermal and electro‑optic properties of graphene oxide‑doped hexylcyanobiphenyl liquid crystal
525
Thermal and emission characteristics of a turbulent swirling inverse diffusion flame
526
Thermal and enzymatic recovering of proteins from untanned leather waste
527
Thermal and enzymatic treatments for the release of free ferulic acid from maize bran
528
Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES)
529
Thermal and exergy analysis of solar air collectors with passive augmentation techniques
530
Thermal and fire risk analysis of typical insulation material in a high elevation area: Influence of sidewalls, dimension and pressure
531
Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites
532
Thermal and flow analysis of a heated electronic component
533
Thermal and flow analysis of microchannel heat sink (MCHS) cooled by Cu–water nanofluid using porous media approach and least square method
534
Thermal and flow behavior of ice slurries in a vertical rectangular channel. Part I: Local distribution measurements in adiabatic flow
535
Thermal and flow behavior of ice slurries in a vertical rectangular channel—Part II. Forced convective melting heat transfer
536
Thermal and flow behaviors in heat transportation container using phase change material
537
Thermal and flow characteristics of the condensation of R404A refrigerant in pipe minichannels
538
Thermal and freeze—thaw properties of starch of chickpea (Cicer arietinum)
539
THERMAL AND FREEZING STRAINS ON A FACE OF WET SANDSTONE SAMPLES UNDER A SUBZERO TEMPERATURE CYCLE
540
Thermal and FTIR analysis of the miscibility and phase behaviour of poly (isobutyl methacrylate-co-4-vinylpyridine)/poly (styrene-co-acrylic acid) systems
541
Thermal and gas analyses of the reaction between iron carbide and steam with hydrogen generation at 573 K
542
Thermal and gas-sensing properties of planar-type micro gas sensor
543
Thermal and geochemical characterization of Lokpanta oil shales, Nigeria
544
Thermal and geochemical constraints on the ‘deep’ magmatic structure of Mt. Vesuvius
545
Thermal and geochemical investigation of Seyitomer oil shale
546
Thermal and geochemical structure of the Uenotai geothermal system, Japan
547
Thermal and geodynamic contributions to the elevation of the Altiplano–Puna plateau
548
Thermal and Grain-Structure Simulation in a Land-Based Turbine Blade Directionally Solidified with the Liquid Metal Cooling Process
549
Thermal and hadrochemical equilibration in nucleus-nucleus collisions at the SPS
550
Thermal and haline variability over the central Bering Sea shelf: Seasonal and interannual perspectives
551
Thermal and heat transfer behaviors of an inverse diffusion flame with induced swirl
552
Thermal and heat transfer characteristics in a latent heat storage system using lauric acid
553
Thermal and high hydrostatic pressure inactivation of myrosinase from green cabbage: A kinetic study
554
Thermal and high pressure high temperature processes result in distinctly different pectin non-enzymatic conversions
555
Thermal and high pressure stability of tomato lipoxygenase and hydroperoxide lyase Original Research Article
556
Thermal and hydraulic analysis of a brazed aluminum evaporator
557
Thermal and hydraulic analysis of multilayered asphalt pavements as active solar collectors
558
Thermal and hydraulic analysis of the cooling system for the ITER equatorial port plugs
559
Thermal and hydraulic analysis on the flow around the motor in semi-hermetic twin screw refrigeration compressors
560
Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger
561
Thermal and hydraulic characteristics of turbulent nanofluids flow in a rib–groove channel
562
Thermal and hydraulic performance of a graphite block heat exchanger
563
Thermal and hydraulic performance of a modified two-stage evaporative cooler
564
Thermal and hydraulic performance of sinusoidal corrugated plate heat exchanger for low temperature lift heat pump
565
Thermal and hydraulic performance of the helium-operated shutter protecting the first mirror of the ITER diagnostics
566
Thermal and hydrodynamic analysis of a fractal microchannel network
567
Thermal and hydrodynamic analysis of microchannel heat sinks: A review
568
Thermal and hydrodynamic characteristics of supercritical CO2 natural circulation in closed loops
569
Thermal and hydrodynamic considerations of ice slurry in heat exchangers
570
Thermal and hydrothermal influence of magmatic emissions on embedding clays of the Upper Cretaceous of the Tunisian eastern margin and the Pelagic Sea
571
Thermal and hygric properties of Portland cement mortar after high-temperature exposure combined with compressive stress
572
Thermal and impact metamorphism on the HED parent asteroid
573
Thermal and infrared characterization of new barium-iron-metaphosphate glasses
574
Thermal and ionic conductivity studies of plasticized PMMA/PVdF blend polymer electrolytes
575
Thermal and IR properties of Mg(II) complexes with heterocyclic ligands
576
Thermal and irradiation induced interdiffusion in magnetite thin films grown on magnesium oxide (0 0 1) substrates
577
Thermal and kinetic analyses of pure and oxidized bitumens
578
Thermal and kinetic analysis of ortho-palladated complexes with pyridines
579
Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis
580
Thermal and kinetic characterization of a toughened epoxy resin reinforced with carbon fibers
581
Thermal and kinetic study of dehydration and decomposition processes for copper intercalated γ-zirconium and γ-titanium phosphates
582
Thermal and light control of the chiral order of azopolymers
583
Thermal- and light-induced nanocluster formation in silver–mesogenic cyanophenyl condensed films
584
Thermal and luminescence characterization of lanthanide 2,6-naphthalenedicarboxylates series
585
Thermal and luminescence characterization of lanthanide 2,6-naphthalenedicarboxylates series
586
Thermal and luminescent properties of polymeric acidic organophosphorus complexes of Eu(III) and Tb(III) undoped and doped with 1,10-phenanthroline
587
Thermal and luminous investigations of a pcLED based refrigerating liquid prototype
588
Thermal and magnetic behavior of a nanocrystalline Fe(Ni, Co) based alloy
589
Thermal and Magnetic Characteristics of Cellulose Acetate- Fe3O4
590
Thermal and Magnetic Characteristics of Cellulose Acetate-Fe3O4
591
Thermal and magnetic evolution of the Earth’s core
592
Thermal and magnetic properties of (ErxY1−x)3Al5O12 for application to ADRs
593
Thermal and magnetic properties of (ErxY1−x)3Al5O12 for application to ADRs
594
Thermal and magnetic properties of a nanotube with spin- 1/2 core and spin- 3/2 shell structure
595
Thermal and magnetothermal properties of La0.5Pr0.5Mn2Si2
596
Thermal and mass spectroscopic characterization of a sulphur-containing bacterial melanin from Bacillus subtilis
597
THERMAL AND MECHANICAL ANALYSIS OF GRAIN STORAGE SILOS UNDER FORCED AERATION CONDITIONS USING ADVANCED MODELLING METHODS
598
Thermal and mechanical analysis of ITER-relevant LHCD antenna elements
599
Thermal and mechanical analysis of material response to non-steady ramp and steady shock wave loading
600
Thermal and mechanical analysis of the EAST plasma facing components
601
Thermal and mechanical analysis of the ITER plasma-position reflectometry antennas
602
Thermal and mechanical analysis of Wendelstein 7-X thermal shield
603
Thermal and mechanical aspect of entropy-exergy relationship
604
Thermal and mechanical behavior of laminated protein films Original Research Article
605
Thermal and mechanical behaviors of Cu–Zr amorphous alloys
606
Thermal and mechanical behaviour of diagnostic windows subjected to intense heat fluxes
607
Thermal and mechanical behaviour of grey cast iron and ductile iron castings using magnetic molding and lost foam processes
608
Thermal and mechanical behaviour of the C60·2S8 monoclinic compound
609
Thermal and mechanical behaviour of the reduced-activation-ferritic-martensitic steel EUROFER
610
Thermal and mechanical characteristics of an instrumented capsule for a material irradiation test
611
Thermal and mechanical characteristics of an instrumented capsule for a material irradiation test Original Research Article
612
Thermal and mechanical characteristics of poly( -lactic acid) nanocomposite scaffold
613
Thermal and mechanical characterization of cellulosic derivatives-based oleogels potentially applicable as bio-lubricating greases: Influence of ethyl cellulose molecular weight
614
Thermal and mechanical characterization of poly(vinyl chloride)-b-poly(butyl acrylate)-b-poly(vinyl chloride) obtained by single electron transfer – degenerative chain transfer living radical polymerization in water
615
Thermal and mechanical characterizations of a Zr-based bulk metallic glass composite toughened by in-situ precipitated Ta-rich particles
616
Thermal and mechanical damage of GaAs in picosecond regime
617
Thermal and mechanical fatigue of a PA66/glass fibers composite material
618
Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders Original Research Article
619
Thermal and mechanical finite element modeling of laser-generated ultrasound in coating–substrate system
620
THERMAL AND MECHANICAL INSTABILITY OF AN IMPERFECT SHALLOW SPHERICAL CAP
621
Thermal and mechanical instability of functionally graded truncated conical shells
622
Thermal and mechanical intensification of essential oil extraction from orange peel via instant autovaporization
623
Thermal and mechanical interfacial properties of epoxy composites based on functionalized carbon nanotubes
624
Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
625
Thermal and mechanical performance of sealed, gas-filled, flat plate solar collectors
626
Thermal and mechanical properties of (U,Er)O2
627
Thermal and mechanical properties of 19th century fireproof flooring systems at elevated temperatures
628
Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes
629
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures
630
Thermal and mechanical properties of alkyl-functionalized nanodiamond composites
631
Thermal and mechanical properties of amorphous Zr65Al7.5Ni10Cu12.5Ag5 alloy containing nanocrystalline compound particles
632
Thermal and mechanical properties of amorphous Zr65Al7.5Ni10Cu12.5Ag5 alloy containing nanocrystalline compound particles
633
Thermal and mechanical properties of beryllium pebbles
634
Thermal and mechanical properties of biodegradable composites of poly(propylene carbonate) and starch–poly(methyl acrylate) graft copolymer
635
Thermal and mechanical properties of bio-nanocomposites reinforced by Luffa cylindrica cellulose nanocrystals
636
Thermal and Mechanical Properties of Borosilicate Glass to Kovar Alloys Joint
637
Thermal and mechanical properties of cordierite, mullite and steatite produced by plasma spraying
638
Thermal and mechanical properties of crack-designed thick lanthanum zirconate coatings
639
Thermal and mechanical properties of fatty acid starch esters
640
Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures
641
Thermal and mechanical properties of glass reinforced soy-based polyurethane composites
642
Thermal and Mechanical Properties of Hybrid Composite Strengthened by Carbon Fibers/Aramid Fibers
643
Thermal and mechanical properties of in situ polymerized PS/EPDM blends
644
Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene
645
Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites
646
Thermal and mechanical properties of liquid crystalline epoxy resins as a function of mesogen concentration
647
Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinking
648
Thermal and mechanical properties of phosphorylated multiwalled carbon nanotube/polyvinyl chloride composites Original Research Article
649
Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites
650
Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites
651
Thermal and mechanical properties of polypropylene in the thermoplastic elastomeric state
652
Thermal and mechanical properties of polypropylene/titanium dioxide nanocomposite fibers
653
Thermal and mechanical properties of rare earth aluminate and low-silica aluminosilicate optical glasses
654
Thermal and mechanical properties of SEBS-g-MA based inorganic composite materials
655
Thermal and mechanical properties of simultaneous and sequential full-interpenetrating polymer networks
656
Thermal and mechanical properties of simultaneous and sequential full-interpenetrating polymer networks
657
Thermal and mechanical properties of single-walled carbon nanotube bundle-reinforced epoxy nanocomposites: the role of solvent for nanotube dispersion
658
Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing Original Research Article
659
Thermal and mechanical properties of sintered LaPO4-Al2O3 composites
660
Thermal and mechanical properties of sintered machinable LaPO4–ZrO2 composites
661
Thermal and mechanical properties of soy protein films processed at different pH by compression Original Research Article
662
Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil
663
Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil
664
Thermal and mechanical properties of the ac¸aı´ fiber/natural rubber composites
665
Thermal and mechanical properties of uranium nitride prepared by SPS technique
666
Thermal and mechanical properties of waste grass broom fiber-reinforced polyester composites
667
Thermal and mechanical stresses in transversely isotropic coatings
668
Thermal and mechanical study from granite and marble industry reject
669
Thermal and mechanically activated decomposition of LiAlH4
670
Thermal and melting heat transfer characteristics in a latent heat storage system using mikro
671
Thermal and membrane processe economics: Optimized selection for seawater desalination Original Research Article
672
Thermal and membrane systems for combined desalination plants Original Research Article
673
Thermal and metallographic characteristics of the Al–20% Si high-pressure die-casting alloy for monolithic cylinder blocks
674
Thermal and microchemical investigation of automotive brake pad wear residues
675
Thermal and microchemical investigation of Phoenician–Punic mortars used for lining cisterns at Tharros (western Sardinia, Italy)
676
Thermal and microscope analysis as a tool in the characterisation of ancient papyri
677
Thermal and microstructural characterization and crystallization kinetic studies in the TeO2−B2O3 system
678
Thermal and microstructural characterization of biodegradable films prepared by extrusion–calendering process
679
Thermal and microstructural effects of welding metallic glasses by self-propagating reactions in multilayer foils
680
Thermal and microstructural effects of welding metallic glasses by self-propagating reactions in multilayer foils Original Research Article
681
Thermal and microstructural evolution under ageing of several high-temperature Ni–Mn–Ga alloys
682
Thermal and microstructural stability of a powdered gum derived from Pereskia aculeata Miller leaves
683
Thermal and microstructural stability of the soft magnetic Fe60Co18Nb6B15Cu1 alloy
684
Thermal and microwave assisted polymerization of vinyl acetate catalyzed by cyclometalated ruthenium (II) complexes
685
Thermal and microwave assisted reactions of 2,5-disubstituted thienosultines with [60]fullerene: non-Kekulé biradicals and self-sensitized oxygenation of the cycloadduct
686
Thermal and microwave hydrolysis of organotrifluoroborates mediated by alumina
687
Thermal- and microwave-assisted hydrogenation of electron-deficient alkenes using a polymer-supported hydrogen donor
688
Thermal and microwave-assisted N-formylation using solid-supported reagents
689
Thermal and Mn diffusion behaviors of CoNbZr-based spin valves with nano oxide layers
690
Thermal and Moisture Diffusion Properties of Amaranth Seeds
691
Thermal and moisture parameters of a dry coarse-grained fill or drainage layer
692
Thermal and morphological analysis of thermoplastic polyurethane–clay nanocomposites: Comparison of efficacy of dual modified laponite vs. commercial montmorillonites
693
Thermal and morphological characteristics of polypropylene/smectic polyester blends
694
Thermal and morphological characterization of conducting, polyaniline/polystyrene blends
695
Thermal and morphological properties of main chain liquid crystalline polymers
696
Thermal and Morphological Properties of Thermoplastic
697
Thermal and morphological studies of binary and ternary composites of poly(vinylalcohol) with alumina and zirconia
698
Thermal and morphological studies on ethylene-vinyl acetate copolymer–polyaniline blends
699
Thermal and morphological studies on isotactic polypropylene containing p-phenylen-bis-maleamic acid grafted groups
700
Thermal and neutron tests of multilayered dielectric mirrors
701
Thermal and NMR characterization on trans-esterification-induced phase changes in blends of poly(ethylene-2,6-naphthalate) with poly(pentylene terephthalate)
702
Thermal and non-Newtonian analysis on mixed liquid–solid lubrication
703
Thermal and non-thermal emission from clusters Original Research Article
704
Thermal and non-thermal fragmentation of xenon cluster ions
705
Thermal and non-thermal particle interaction with the LHCD launchers in Tore Supra
706
Thermal and operational stabilities of Hansenula polymorpha alcohol oxidase
707
Thermal and optical characterization of push–pull azo dye-doped poly(methylmethacrylate) thin film as short wavelength optical recording media
708
Thermal and optical characterization of push–pull azo dye-doped poly(methylmethacrylate) thin film as short wavelength optical recording media
709
Thermal and optical evolution of gas in vacuum glazing
710
Thermal and optical investigation of EuF3-doped lead fluorogermanate glasses
711
Thermal and optical properties of Cd1-xZnxS thin films by photoacoustics
712
Thermal and optical properties of chalcohalide glass
713
Thermal and optical properties of CuO–BaO–B2O3–P2O5 glasses
714
Thermal and optical properties of diode side-pumped solid state laser rods
715
Thermal and optical properties of electron beam irradiated cellulose triacetate
716
Thermal and optical properties of Er3+-doped oxyfluorotellurite glasses
717
Thermal and optical properties of GeS2-based chalcogenide glasses
718
Thermal and optical properties of hyperbranched fluorinated polyimide/mesoporous SiO2 nanocomposites exhibiting high transparency and reduced thermo-optical coefficients
719
Thermal and optical properties of silver–poly(methylmethacrylate) nanocomposites prepared by in-situ radical polymerization
720
Thermal and optical properties of TeO2–BaO–SrO–Nb2O5 based glasses: New broadband Raman gain media
721
Thermal and optical properties of TeO2–ZnO–BaO glasses
722
Thermal and optical properties of the ferroelectric (C3N2H5)5Bi2Cl11 crystal
723
Thermal and optical properties of the Ga–Ge–Sb–Se glasses
724
Thermal and optical properties of Tm3+: Li6Gd(BO3)3 crystal: A potential candidate for 1.83 μm lasers
725
Thermal and optical properties of transparent magnesium oxide ceramics fabricated by post hot-isostatic pressing
726
Thermal and optical properties of zinc halotellurite glasses
727
Thermal and optical studies of an amorphous InSe9 alloy produced by mechanical alloying
728
Thermal and oxidative stability of fluorinated alkyl aryl ethers
729
Thermal and palladium catalyzed pericyclic rearrangements of a pentaene ester
730
Thermal and pasting properties of native and acid-treated starches derivatized by 1-octenyl succinic anhydride
731
Thermal and performance analyses of efficient radioisotope power systems
732
Thermal and petrologic study of the CH-A well from the Chipilapa-Ahuachapán geothermal area, el salvador
733
Thermal and petrological structure of the lithosphere beneath Hannuoba, Sino-Korean Craton, China: evidence from xenoliths
734
Thermal and pH dual responsive alginate/CaCO3 hybrid membrane prepared under compressed CO2
735
Thermal and pH dual stimuli-responsive hybrid inclusion complex with tunable nonlinear optical properties
736
Thermal and pharmacological characterization of some new bis-xanthine derivatives
737
Thermal and phase evolution of mechanochemical reactions in the Al–Fe3O4 system
738
Thermal and Photo Control of the Linkage Isomerism of Bis(thiocyanato)(2,2-bipyridine)platinum(II)
739
Thermal and photo reversible gel–sol transition of azobenzene based liquid crystalline organogel
740
Thermal and photo substitution reactivity and crystal structures of tridentate Schiff base–ruthenium(II) complexes containing phosphorus or sulfur donor atoms
741
Thermal and photochemical behavior of trans-ruthenium(II) dichloride tetraphosphite complexes
742
Thermal and photochemical curing of isocyanate and acrylate functionalized oligomers
743
Thermal and photochemical degradation of dimethylsulfoxide on TiO2
744
Thermal and photochemical deposition of sulfur on GaAs(100)
745
Thermal and photochemical isomerization of exocyclic 1,3-dienes: 1,1-diphenyl-3,4-bis(trimethylsilylmethylene)-1-silacyclopentane s-cis(E,E)
746
Thermal and photochemical nitric oxide release from S-nitrosothiols incorporated in Pluronic F127 gel: potential uses for local and controlled nitric oxide release
747
Thermal and photochemical properties of 4′-hydroxyflavylium in water–ionic liquid biphasic systems
748
Thermal and photochemical reactions of Fischer carbene complexes with trialkylsilyl-substituted alkynes
749
Thermal and photochemical reactions of phenylethynyltris-(trimethylsilyl)germane
750
Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces
751
Thermal and photochemistry of tert-butyl iodide on ice films
752
THERMAL AND PHOTODECOMPOSITION OF FENITROTHION AND MALATHION INSECTICIDES
753
Thermal and photoinduced reduction of some benzyl bromides by an NAD(P)H model: the effect of electron withdrawing groups on mechanism and reactivity
754
Thermal and photoluminescence properties of hydrated YPO4:Eu3+ nanowires
755
Thermal and Physical Ageing Properties of Poly(methyl methacrylate) Silica Nanocomposites
756
Thermal and physical characterisation of apatite/wollastonite bioactive glass–ceramics
757
Thermal and physical properties of 30SrO–40SiO2–20B2O3–10A2O3 (A = La, Y, Al) glasses and their chemical reaction with bismuth vanadate for SOFC
758
Thermal and physical properties of Al–Ni–Ru–M alloys
759
Thermal and physical properties of B2 Al–Ir–X (X = Ni, Ru, Pd, Co, Fe) alloys
760
Thermal and physical properties of molten fluorides for nuclear applications
761
Thermal and probiotic treatment effects on restaurant waste for incorporation into poultry diet
762
Thermal and pseudoelastic cycling in Cu-14.1Al-4.2Ni (wt%) single crystals
763
Thermal and pseudoelastic cycling in Cu–14.1Al–4.2Ni (wt%) single crystals Original Research Article
764
Thermal and pulsed electric fields pasteurization of apple juice: Effects on physicochemical properties and flavour compounds Original Research Article
765
Thermal and quantum fluctuations in the kaon-condensed phase Original Research Article
766
Thermal- and radiation-enhanced diffusion of uranium in oxidised zirconium
767
Thermal and radiation-induced segregation in model Ni-base alloys
768
Thermal and radiative characteristics of oxyfluoride glass singly doped with lanthanide ions
769
Thermal and radiochemical degradation of some PAN copolymers
770
Thermal and radiolysis assisted formation of Au–Pd heteroaggregates
771
Thermal and Raman-spectroscopic analysis of Maya Blue carrying artefacts, especially fragment IV of the Codex Huamantla
772
Thermal and rare gas evolution of the mantle
773
Thermal and reflectance based personal identification methodology under variable illumination
774
Thermal and rheological behavior of acetylacetone stabilized ZnO nanofluids
775
Thermal and rheological characteristics of CuO–Base oil nanofluid flow inside a circular tube
776
Thermal and rheological properties and the effects of temperature on the viscosity and oxidation rate of unpurified salmon oil Original Research Article
777
Thermal and Rheological Properties Improvement of Oil-based Drilling Fluids Using Multi-walled Carbon Nanotubes (MWCNT)
778
Thermal and rheological properties of granular waxy maize mutant starches after isoamylase modification
779
Thermal and rheological properties of granular waxy maize mutant starches after β-amylase modification
780
Thermal and rheological properties of highly concentrated PET composites with ferrite nanoparticles
781
Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures
782
Thermal and rheological properties of tapioca starch gels with and without xanthan gum under cold storage Original Research Article
783
Thermal and salt crystallization effects on marble deterioration: Examples from Western Anatolia, Turkey
784
Thermal and sanitary performance of domestic hot water cylinders: Conflicting requirements
785
Thermal and SAR characterization of multielement dual concentric conductor microwave applicators for hyperthermia,a theoretical investigation
786
Thermal and shape properties of asteroid (21) Lutetia from Herschel observations around the Rosetta flyby
787
Thermal and shrinkage behaviour of stretched peroxide-crosslinked high-density polyethylene
788
Thermal and Slip Effects on Rotor Time Constant in Vector Controlled Induction Motor Drives
789
Thermal and solutal effects on convection inside a polymer solution droplet on a substrate
790
Thermal and solvent effects on the coordination structure of LiAlH4: a computational study
791
Thermal and some physical properties of glasses in the La2O3−CaO−B2O3 ternary system
792
Thermal and sonochemical synthesis of porous (Ce,Zr)O2 mixed oxides from metal β-diketonate precursors and their catalytic activity in wet air oxidation process of formic acid
793
Thermal and sonochemical synthesis of porous (Ce,Zr)O2 mixed oxides from metal β-diketonate precursors and their catalytic activity in wet air oxidation process of formic acid
794
Thermal and spectral characterization of a binary mixture (acyclovir and fluocinolone acetonide): Eutectic reaction and inclusion complexes with β-cyclodextrin
795
Thermal and spectral properties of Mg(II) and Cu(II) complexes with heterocyclic N-donor ligands
796
Thermal and spectral studies of 5-(phenylazo)-2-thiohydantoin and 5-(2- hydroxyphenylazo)-2-thiohydantoin complexes of cobalt(II), nickel(II) and copper(II)
797
Thermal and spectral studies of binary complexes of cyanodithioformate with transition metal ions
798
Thermal and spectroscopic characterization of glasses and glass–ceramics of Li2O–Al2O3–SiO2 (LAS) system
799
Thermal and spectroscopic characterization of Mg(II) complexes of nitro-substituted benzoic acids
800
Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques
801
Thermal and spectroscopic properties of Tm3 + doped TZPPN transparent glass laser material
802
Thermal and spectroscopic properties of zinc perchlorate/poly(vinylpyrrolidone) blends and a comparison with related hydrogen bonding systems
803
Thermal and spectroscopic studies of feasibility of rhodium acetate versus chloride as a likely precursor for Rh° metal catalysts
804
Thermal and spectroscopic studies of scandium complex of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone
805
Thermal and spectroscopic studies of terbium(III) and dysprosium(III) complexes with piperidin-4-ones
806
Thermal and spectroscopic studies of zeolites exchanged with metal cations
807
Thermal and spectroscopic studies on sorption of nickel(II) ion on protonated baker’s yeast
808
Thermal and spectroscopic studies on the decomposition of [Ni{di(2-aminoethyl)amine}2]- and [Ni(2,2′:6′,2′′-terpyridine)2]-Montmorillonite intercalated composites
809
Thermal and stability considerations for a supercritical water-cooled fast reactor with downward-flow channels during power-raising phase of plant startup Original Research Article
810
Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts
811
Thermal and stress analysis of a sheet metal in welding
812
Thermal and stress analysis of Kinta RCC dam
813
Thermal and stress analysis of rapid electric heating injection mold for a large LCD TV panel
814
Thermal and stress modeling of multi-material laser processing Original Research Article
815
Thermal and stress-induced martensitic transformations in quaternary Ni50Mn37(In, Sb)13 ferromagnetic shape memory alloys
816
Thermal and structural analysis of 4,5,6-trimethoxyisatin
817
Thermal and structural analysis of a polymer bilayer film as an erasable optical material
818
Thermal and structural analysis of a polymer bilayer film as an erasable optical material
819
Thermal and structural analysis of the W7-X magnet heat radiation shield
820
Thermal and structural changes induced by mechanical alloying in melt-spun Fe–Ni based amorphous alloys
821
Thermal and structural changes induced by mechanical alloying in melt-spun Fe–Ni based amorphous alloys
822
Thermal and structural characterization of cyclomaltononaose (δ-cyclodextrin), cyclomaltodecaose (ε-cyclodextrin) and cyclomaltotetradecaose (ι-cyclodextrin)
823
Thermal and structural characterization of Fe–Nb–B alloys prepared by mechanical alloying
824
Thermal and structural characterization of Fe–Nb–B alloys prepared by mechanical alloying
825
Thermal and structural characterization of polypyrrole by direct-insertion probe pyrolysis mass spectrometry
826
Thermal and structural characterization of selenium-rich As–Se fibers
827
Thermal and structural characterization of synthetic and natural nanocrystalline hydroxyapatite
828
Thermal and structural characterization of trimethylolethane trihydrate
829
Thermal and structural characterizations of PEO–EMIHSO4 polymer electrolytes
830
Thermal and structural finite element analysis of water cooled silicon monochromator for synchrotron radiation: comparison of two different cooling schemes
831
Thermal and structural finite element analysis of water cooled silicon monochromator for synchrotron radiation: comparison of two different cooling schemes
832
Thermal and structural heterogeneities during cooking of a starch-based product by a non-intrusive ring sensor
833
Thermal and Structural Investigations of the Bis-Dihexadecyldimethylammonium Dichromate
834
Thermal and structural properties of a hemp–lime biocomposite
835
Thermal and structural properties of blends of isotactic with atactic polystyrene
836
Thermal and structural properties of Ca-rich Montmorillonite mechanically deformed by compaction and shear
837
Thermal and structural properties of high-energy electron irradiated poly(vinylidene fluoride-trifluoroethylene) copolymer blends
838
Thermal and structural properties of low-fluence irradiated graphite
839
Thermal and structural properties of unusual starches from developmental corn lines
840
Thermal and structural stability of single- and multi-walled carbon nanotubes up to 1800 °C in Argon studied by Raman spectroscopy and transmission electron microscopy
841
Thermal and structural studies on TeO2 substituted (PbO)0.5(P2O5)0.5 glasses
842
Thermal and structural study of BIVOX undoped and doped with La in various atmosphere toward applications in IT-SOFC Review Article
843
Thermal and structural study of glasses in the binary system TeO2–Pb(PO3)2
844
Thermal and structural study on densification of rare-earth-doped PbO–SiO2 aerogels
845
Thermal and structural study on the lattice compound 1,4-diammoniumbutane bis(theophyllinate)
846
Thermal and substituting effects of transition metal ions (Cr3+ or Mn4+) on physical properties of (V2O5)0.8-(P2O5)0.2 glass
847
Thermal and superconducting properties of glass–ceramic HTc BiSrCa(CuPr)O system
848
Thermal and technical analyses of solar chimneys
849
Thermal and tectonic consequences of India underthrusting Tibet
850
Thermal and tectonic evolution of the Falkland Islands: implications for hydrocarbon exploration in the adjacent offshore region
851
Thermal and tectonic evolution of the paleoproterozoic Transamazonian orogen as deduced from 40Ar/39Ar and AMS along the Oyapok river (French Guyana)
852
Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation
853
Thermal and tensile properties of HTPB-based PU with PVC blends
854
Thermal and tensile properties of polysialate composites
855
Thermal and themoxidative degradation processes in poly(bisphenol a carbonate)
856
Thermal and thermal-stress analyses of IFMIF liquid lithium target assembly
857
Thermal and Thermal-Stressed States of Railway Wheels in the Process of Local Surface Hardening
858
Thermal and thermo-catalytic degradation of high-density polyethylene waste
859
Thermal and thermoelastic behaviour of multiply coated inclusion-reinforced composites
860
Thermal and thermoelectric properties of icosahedral Al62Cu25.5Fe12.5 quasicrystal
861
Thermal and thermoelectric properties of icosahedral Al62Cu25.5Fe12.5 quasicrystal
862
Thermal and thermohydraulic performance of roughened solar air heater having protruded absorber plate
863
Thermal and thermo-mechanical influence on crack propagation using an extended mesh free method
864
Thermal and thermo-oxidative decomposition of ammonium–iron(II) phosphate monohydrate
865
Thermal and thermo-oxidative degradation of poly(hydroxy ether of bisphenol-A) studied by TGA/FTIR and TGA/MS
866
Thermal and thermo-oxidative degradation of poly(hydroxy ether of bisphenol-A) studied by TGA/FTIR and TGA/MS
867
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
868
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
869
Thermal and topographic tests of Europa chaos formation models from Galileo E15 observations
870
Thermal and topographical characterization of polyester- and styrene/acrylate-based composite powders by scanning probe microscopy
871
Thermal and Transport Properties of Mafic and Ultramafic Rocks of Oman Ophiolite
872
Thermal and transport properties of mantle rock at high pressure: Applications to super-Earths
873
Thermal and transport properties of Ni2MnGa1−xAlx alloys
874
Thermal and UV stability of β-carotene dissolved in peppermint oil microemulsified by sunflower lecithin and Tween 20 blend
875
Thermal and velocity slip effects on the peristaltic flow of a six constant Jeffrey’s fluid model
876
Thermal and ventilation modelling of large highly-glazed spaces
877
Thermal and viscoelastic properties of alginate/poly(vinyl alcohol) blends cross-linked with calcium tetraborate
878
Thermal and viscoelastic structure–property relationships of model comb-like poly(n-butyl methacrylate)
879
Thermal and visual time-series at a seafloor gas hydrate deposit on the Gulf of Mexico slope
880
Thermal and water management in irrigating lands in the arid and semi-arid regions
881
Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system
882
Thermal and water storage characteristics of super-absorbent polymer gel which absorbed aqueous solution of calcium chloride
883
Thermal and water transfer in PEMFCs: Investigating the role of the microporous layer
884
Thermal and wear analysis of an elastic beam in sliding contact
885
Thermal and wind structure of the Martian thermosphere as given by two General Circulation Models
886
Thermal and x-ray measurements in smectic phases of the PBnA liquid crystal family
887
Thermal and XRD analysis of synthesis of fluoro-topaz
888
Thermal and -γ –Ray Irradiation Effects on the Ionic Conductivity of (LiCl)x(Montmorillonite)1-x
889
Thermal anemometric assessment of coronary flow reserve with a pressure-sensing guide wire: An in vitro evaluation
890
Thermal anisotropy in sintered cordierite monoliths
891
Thermal anisotropy of epoxy resin-based nano-hybrid films containing BN nanosheets under a rotating superconducting magnetic field
892
Thermal anneal activation of defects in hydrogen plasma-treated silicon
893
Thermal anneal activation of defects in hydrogen plasma-treated silicon
894
Thermal annealing and air exposing effect on the graphene/silicon Schottky junctions
895
Thermal annealing and optical darkening effects in CsI(Tl) crystals
896
Thermal annealing and optical darkening effects in CsI(Tl) crystals
897
Thermal annealing as a method to predict results of high temperature irradiation embrittlement
898
Thermal annealing as a new simple method for PTFE texturing
899
Thermal annealing behavior and structure development of crystalline hard segment domain in a melt-quenched thermoplastic polyurethane
900
Thermal annealing behaviour and defect evolution of helium in fully stabilised zirconia
901
Thermal annealing behaviour of Pd Schottky contacts on melt-grown single crystal ZnO studied by IV and CV measurements
902
Thermal annealing dependence of some optical properties of plasma-modified porous silicon
903
Thermal annealing dependence of the structural, optical and electrical properties of selenium–tellerium films
904
Thermal annealing effect of alkanethiol monolayers on Au(1 1 1) in air
905
Thermal annealing effect on 1.3-(mu)m GaInNAs/GaAs quantum well structures capped with dielectric films
906
Thermal annealing effect on nanostructured TiO2 microsensors by supersonic cluster beam deposition
907
Thermal annealing effect on the crystallization and optical dispersion of sprayed V2O5 thin films Original Research Article
908
Thermal annealing effect on the photoluminescence properties of unstrained GaInAsSb/InP single quantum well grown by MOVPE
909
Thermal annealing effect on Y2O3:Eu3+ phosphor films prepared by yttrium 2-methoxyethoxide sol–gel precursor
910
Thermal annealing effects of C22-Quinolium(TCNQ) Langmuir-Blodgett films
911
Thermal annealing effects on a compositionally graded SiGe layer fabricated by oxidizing a strained SiGe layer
912
Thermal annealing effects on chemical states of deuterium implanted into boron coating film
913
Thermal annealing effects on Cu–Se resonant tunneling diodes fabricated by electrodeposition-assisted template synthesis technique
914
Thermal annealing effects on morphology and electrical response in ultrathin film organic transistors
915
Thermal annealing effects on Ni/Au contacts to p type GaN in different ambient
916
Thermal annealing effects on polyaniline studied by electrically detected magnetic resonance
917
Thermal annealing effects on structural properties of Si-doped/undoped a-CHthin films
918
Thermal annealing effects on the dynamic photoresponse properties of Al-doped ZnO nanowires network
919
Thermal annealing effects on the structural and electrical properties of PMN–PZ–PT ternary thin films deposited by a sol–gel process
920
Thermal annealing in FHD Ge-doped SiO2 film for applications in optical waveguides
921
Thermal annealing induced high performance light-emitting diodes based on poly(9,9′-dioctyl fluorene)
922
Thermal Annealing Influence over Optical Properties of Thermally Evaporated SnS/CdS Bilayer Thin Films
923
Thermal annealing mechanisms of latent fission tracks: Apatite vs. zircon
924
Thermal annealing of a-Si/Au superlattice thin films
925
Thermal annealing of coal at high temperature and high pressure. Effects on fragmentation and on rate of combustion, gasification and oxy-combustion
926
Thermal annealing of defects in highly defective NiO nanoparticles studied by X-ray and electron spectroscopies
927
Thermal annealing of GaSb quantum dots in GaAs formed by droplet epitaxy
928
Thermal annealing of heavy ion latent tracks in soda and BP-1 phosphate glasses
929
Thermal annealing of interface traps and trapped charges induced by irradiation in oxides of 3C-SiC metal-oxide-semiconductor structures
930
Thermal annealing of interface traps and trapped charges induced by irradiation in oxides of 3C-SiC metal-oxide-semiconductor structures
931
Thermal annealing of Nb/Al-AlO/sub x//Nb Josephson junctions
932
Thermal Annealing of Neutron Irradiated Ammonium and Potassium Dichromate
933
Thermal annealing of shear bands in deformed metallic glasses: Recovery mechanisms in Cu64Zr36 studied by molecular dynamics simulations Original Research Article
934
Thermal annealing of SiC thin films with varying stoichiometry
935
Thermal annealing of unetched fission tracks in apatite
936
Thermal annealing study of F center clusters in LiF single crystals
937
Thermal annealing study of F center clusters in LiF single crystals
938
Thermal annealing synthesis of titanium-dioxide nanowire–nanoparticle hetero-structures
939
Thermal annealing-induced electric dipole relaxation in natural alexandrite
940
Thermal anomalies detection before earthquake using three filters (Fourier, Wavelet and Logarithmic Differential Filter), A Case study of two earthquakes in Iran
941
Thermal anomalies in fumaroles at Vulcano island (Italy) and their relationship with seismic activity
942
Thermal anomaly detection using NARX neural network method to estimate the earthquake occurrence time
943
Thermal anomaly, heat index and urban heat island during the Hajj season in Saudi Arabia
944
Thermal applicability of two-phase thermosyphons in cooking chambers––experimental and theoretical analysis
945
Thermal architecture design tests for the Planck/HFI instrument
946
Thermal architecture design tests for the Planck/HFI instrument
947
Thermal aspects in the face grinding of ceramics
948
Thermal aspects of c-Si photovoltaic module energy rating
949
Thermal aspects of open sun drying of various crops
950
Thermal Aspects Related to Power Assemblies
951
Thermal aspects, material considerations and cooling strategies in cryogenic machining
952
Thermal assembly of a biomimetic mineral/collagen composite
953
Thermal Assessment of a Novel Thermal Diode Solar Water Heater Using Different Heat Transfer Fluids: An Experimental Study
954
Thermal assessment of heat mitigation strategies: The case of Portland State University, Oregon, USA
955
Thermal assisted ultrasonic bonding method for poly(methyl methacrylate) (PMMA) microfluidic devices
956
Thermal atropisomerism of fully functionalized vancomycin CD, DE, and CDE ring systems
957
Thermal augmentation in circular tube with twisted tape and wire coil turbulators
958
Thermal balance analysis of activated-sludge process for pig slurry treatment
959
Thermal balance of a four stroke SI engine operating on hydrogen as a supplementary fuel
960
Thermal balance of a LPG fuelled, four stroke SI engine with water addition
961
Thermal balance of a single cylinder diesel engine operating on alternative fuels
962
Thermal balance of livestock: 1. A parsimonious model
963
Thermal balance of livestock: 2. Applications of a parsimonious model
964
Thermal Balance of On-Stream Storm-Water Management Pond
965
Thermal Balloon Ablation Versus Endometrial Resection for the Treatment of Abnormal Uterine Bleeding
966
Thermal Balloon Endometrial Ablation in the Treatment of Heavy Menstrual Bleeding
967
Thermal barrier coating effect on stress and temperature distribution of diesel engines cylinder heads using a twolayer viscoelasticity model with considering viscosity effects
968
Thermal barrier coating made of porous zirconium oxide on a nickel-based single crystal superalloy formed by plasma electrolytic oxidation
969
Thermal barrier coating systems — analysis of nanoindentation curves
970
Thermal barrier coating toughness: Measurement and identification of a bridging mechanism enabled by segmented microstructure
971
Thermal barrier coatings adherence and spallation: Interfacial indentation resistance and cyclic oxidation behaviour under thermal gradient
972
Thermal barrier coatings deposited by laser CVD
973
Thermal barrier coatings for enhanced efficiency of gas turbine engines
974
Thermal barrier coatings on γ-TiAl protected by the halogen effect
975
Thermal barrier coatings with (Al2O3–Y2O3)/(Pt or Pt–Au) composite bond coat and 8YSZ top coat on Ni-based superalloy
976
Thermal barrier coatings with two layer bond coat on intermetallic compound Ni3Al based alloy
977
Thermal bath effect on soliton propagation in three-level atomic system
978
Thermal batteries modeling, self-discharge and self-heating
979
Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
980
Thermal Behavior Analysis of Semi-Open Space in Residential Complexes of Mashhad County with the help of Honeybee Energy Plus Software
981
Thermal behavior and catalytic activity in naphthalene destruction of Ce-, Zr- and Mn-containing oxide layers on titanium
982
Thermal behavior and characteristics of fired geopolymers produced from local Cameroonian metakaolin
983
Thermal behavior and combustion mechanism of high-nitrogen energetic materials DHT and BTATz
984
Thermal behavior and compatibility analysis of the new chemical entity LPSF/FZ4
985
Thermal Behavior and Crystal Structure at 435 K of the Mixed Rubidium Ammonium Sulfate Tellurate Rb1.12(NH4) 0.88SO4·Te(OH)6
986
Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis
987
Thermal behavior and decomposition kinetics of Viton A bonded explosives containing attractive cyclic nitramines
988
Thermal behavior and decomposition of kaolinite–potassium acetate intercalation composite
989
Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments
990
Thermal behavior and effect of heat treatment in an inert gas on oxidized carbon microcoils Original Research Article
991
Thermal behavior and gaseous emission analysis during co-combustion of ethanol fermentation residue from food waste and coal using TG–FTIR
992
Thermal behavior and gaseous emission analysis during co-combustion of ethanol fermentation residue from food waste and coal using TG–FTIR
993
Thermal behavior and gelling interactions of Mesona Blumes gum and rice starch mixture
994
Thermal behavior and glass transition of Zr-based bulk metallic glasses
995
Thermal behavior and glass transition of Zr-based bulk metallic glasses
996
Thermal behavior and hydration properties of yeast proteins from Saccharomyces cerevisiae and Kluyveromyces fragilis
997
Thermal behavior and hydrogen production of methanol steam reforming and autothermal reforming with spiral preheating
998
Thermal behavior and ice-table depth within the north polar erg of Mars
999
Thermal behavior and kinetics of bio-ferment residue/coal blends during co-pyrolysis
1000
Thermal behavior and kinetics of crude oils at low heating rates by differential scanning calorimeter