<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis of the damage zone around the crack tip for two rubber-modified epoxy matrices exhibiting different toughenability
2
Analysis of the dark current of focal-plane-array Hg1−xCdxTe diode
3
Analysis of the data from Compton X-ray polarimeters which measure the azimuthal and polar scattering angles
4
Analysis of the debonding of the stem–cement interface in intramedullary fixation using a non-linear fracture mechanics approach
5
Analysis of the debonding process in polypropylene model composites
6
Analysis of the decay mode D0 → K−μ+νμ
7
Analysis of the decays B→ππ and πK with QCD factorization in the heavy quark limit
8
Analysis of the December 1998 Santa Cruz Mountains, California, Earthquake Sequence
9
Analysis of the decomposition of Cu–Ni and Fe–Ni alloys at lower temperatures by atom probe
10
Analysis of the decomposition of Cu–Ni and Fe–Ni alloys at lower temperatures by atom probe
11
Analysis of the deep-seated gravitational slope deformations over Mt. Frascare (Central Italy) with geomorphological assessment and DInSAR approaches
12
Analysis of the deformation mechanisms in bulk ultrafine grained metallic materials
13
Analysis of the deformation of a perforated sheet under thermal and tension load using finite element method
14
Analysis of the degradation compounds of chemical warfare agents using liquid chromatography/mass spectrometry
15
Analysis of the degradation of a PWR control rod during a loss of coolant accident, using the ICARE2 code
16
Analysis of the degradation of a PWR control rod during a loss of coolant accident, using the ICARE2 code
17
Analysis of the degradation of a PWR control rod during a loss of coolant accident, using the ICARE2 code Original Research Article
18
Analysis of the degree of undertreatment of hyperlipidemia and congestive heart failure secondary to coronary artery disease
19
Analysis of the degrees-of-freedom of spatial parallel manipulators in regular and singular configurations
20
Analysis of the delay hot/cold water problem
21
Analysis of the DELPHI RICH data at LEP II
22
Analysis of the DELPHI RICH data at LEP II
23
ANALYSIS OF THE DEMOCRATlC ATTITUDES OF PRE-SERVICE TEACHERS AND TEACHERS IN TERMS OF SOME VARIABLES
24
Analysis of the densification of a vibrated sand packing
25
Analysis of the density effect on partial oxidation of methane in supercritical water
26
Analysis of the dentin–resin interface by use of laser Raman spectroscopy
27
Analysis of the dependence of column-integrated aerosol properties on long-range transport of air masses in Beijing
28
Analysis of the Dependence of the Range of the Edge Effect in a Laminated Composite with Transversely Isotropic Filler on the Mechanical Characteristics
29
Analysis of the dependence of the spectral factor of some PV technologies on the solar spectrum distribution
30
Analysis of the design of a new tunable photonic crystal filter at visible band
31
Analysis of the design of a pressurized SOFC hybrid system using a fixed gas turbine design
32
Analysis of the detachment of citrus fruits by vibration using artificial vision
33
Analysis of the detective quantum efficiency of a developmental detector for digital mammography
34
Analysis of the detective quantum efficiency of a developmental detector for digital mammography
35
Analysis of the determinants of adoption of Domestic Rainwater Harvesting systems (DRWHs) in Golestan Province, Iran
36
Analysis of the development of microscopic residual stresses on quartz particles in porcelain tile
37
Analysis of the development strategy of late-entrants in Taiwan and Korea’s TFT-LCD industry
38
Analysis of the development strategy of late-entrants in Taiwan and Korea’s TFT-LCD industry
39
Analysis of the Development Strategy of Micro, Small and Medium Enterprises (MSMEs) in Kolaka District, Southeast Sulawesi, Indonesia
40
Analysis of the developmental characteristics and major regulating factors of fractures in marine–continental transitional shale-gas reservoirs: A case study of the Carboniferous–Permian strata in the southeastern Ordos Basin, central China
41
Analysis of the deviations of a casting and machining process using a Model of Manufactured Parts
42
Analysis of the device characteristics of AlGaN/GaN HEMTs over a wide temperature range
43
Analysis of the diamagnetic interactions of superheated-superconducting granules in a bidimensional array
44
Analysis of the diastereoisomers of alliin by HPLC
45
Analysis of the diastereoisomers of the cysteinylated aroma precursor of 3-sulfanylhexanol in Vitis vinifera grape must by gas chromatography coupled with ion trap tandem mass spectrometry
46
ANALYSIS OF THE DIFFERENT LAND REALLOCATION RESULTS IN LAND CONSOLIDATION PROJECT: A CASE STUDY IN ÜÇHÜYÜKLER NEIGHBORHOOD, ÇUMRA-KONYA-TURKEY
47
Analysis of the different slip systems activated by tension in a (alpha)/(beta) titanium alloy in relation with local crystallographic orientation
48
Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation Original Research Article
49
Analysis of the diffuse layer potential drop in the limit of small fields on the basis of a generalized mean spherical approximation
50
Analysis of the Diffuse Near-Infrared Emission from Two-Micron All-Sky Survey Deep Integration Data: Foregrounds versus the Cosmic Infrared Background
51
Analysis of the diffusion battery data collected for nanometer aerosol particles
52
Analysis of the diffusion weighted MR microscopy data of excised spinal cord of a rat on the basis of the model of restricted diffusion
53
Analysis of the discharge performance of a flooded lead/acid cell using mathematical modelling
54
Analysis of the discontinuous Galerkin method for Hamilton–Jacobi equations Original Research Article
55
Analysis of the discontinuous Galerkin method for nonlinear convection–diffusion problems Original Research Article
56
Analysis of the discrete-time bulk-service queue Geo/GY/1/N+B
57
Analysis of the discrete-time GI/Geom(n)/1/N queue
58
Analysis of the dispersion of a fixed mass of LNG boil off vapour from open to the atmosphere vertical containers
59
Analysis of the dispersion spectrum of fluid-loaded anisotropic plates: flexural-type branches and real-valued loops
60
Analysis of the dispersion spectrum of fluid-loaded anisotropic plates: leaky-wave branches
61
Analysis of the dispersive mixing efficiency in a twin-screw extrusion processing of starch based matrix Original Research Article
62
Analysis of the dissipation and dispersion properties of the multi-domain Chebyshev pseudospectral method
63
Analysis of the distorted Born approximation for subsurface reconstruction: truncation and uncertainties effects
64
Analysis of the distribution and evolution of energy supply and demand centers of gravity in China
65
Analysis of the distribution and frequency of trisomy 7 in vivo in synovia from patients with osteoarthritis and pigmented villonodular synovitis
66
Analysis of the distribution of adsorbate molecules within zeolite crystals by thermokinetics
67
Analysis of the distribution of cited journals according to their positions in the h-core of citing journal listed in Journal Citation Reports
68
Analysis of the distribution of diffusion coefficients in cat brain at 9.4 T using the inverse Laplace transformation
69
Analysis of the distribution of the brain cells of the fruit fly by an automatic cell counting algorithm
70
Analysis of the distribution of the order parameter of synthetic seismicity generated by a simple spring–block system with asperities
71
Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures
72
Analysis of the distribution of Tm3 + ions in LaF3 containing transparent glass-ceramics through X-ray absorption spectroscopy
73
Analysis of the distributional effects of radioactive materials on external gamma exposure
74
Analysis of the distributions of stress in natural ridge forms: implications for the deformation mechanisms of rock slopes and the formation of sackung
75
Analysis of the Domains of Hepatitis C Virus Core and NS5A Proteins that Activate the Nrf2/ARE Cascade
76
Analysis of the dominant vibration frequencies of rail bridges for structure-borne noise using a power flow method
77
Analysis of the DORIS contributions to ITRF2008 Original Research Article
78
Analysis of the drive shaft fracture of the bucket wheel excavator
79
Analysis of the drying kinetics of chestnuts
80
ANALYSIS OF THE DRYING KINETICS OF S. BARTOLOMEU PEARS FOR DIFFERENT DRYING SYSTEMS
81
Analysis of the drying process of a biopolymer (poly-hydroxybutyrate) in rotating-pulsed fluidized bed
82
Analysis of the drying process of seed particles in a spouted bed with a draft tube
83
Analysis of the Ductile Strength of Welds Weakened by Notches in Longitudinally Welded Pipes of Large Diameter by the Method of Slip Lines
84
Analysis of the duration of periods of highintensity activity and low-intensity recovery performed during English FA Premier League soccer
85
Analysis of the dynamic behavior of the car user in the irregular terrain
86
ANALYSIS OF THE DYNAMIC BEHAVIOUR OF T-BEAM BRIDGE DECKS DUE TO HEAVYWEIGHT VEHICLES
87
Analysis of the dynamic characteristics of a combined-cycle power plant
88
Analysis of the dynamic features of metal oxide sensors in response to SPME fiber gas release
89
Analysis of the dynamic flexural behaviour of composite beams at low temperature
90
Analysis of the Dynamic Forces of 3D Printer with 4 Degrees of Freedom
91
Analysis of the Dynamic Influence of Social Network Nodes
92
Analysis of the dynamic performance of an underground excavation in jointed rock under repeated seismic loading
93
Analysis of the dynamic propagation of adiabatic shear bands
94
Analysis of the dynamic response improvement of a turbocharged diesel engine driven alternating current generating set
95
Analysis of the Dynamic Response of a Reverse Osmosis Membrane to Time-Dependent Transmembrane Pressure Variation
96
Analysis of the dynamic stability of collar-stiffened pipes conveying fluid
97
Analysis of the dynamic strains in a fingertip exposed to vibrations: Correlation to the mechanical stimuli on mechanoreceptors
98
Analysis of the dynamics and origin of epileptic activity in patients with tuberous sclerosis evaluated for surgery of epilepsy
99
Analysis of the dynamics of a delayed HIV pathogenesis model
100
Analysis of the dynamics of a realistic ecological model
101
Analysis of the dynamics of a slider–crank mechanism with hydrodynamic lubrication in the connecting rod–slider joint clearance
102
ANALYSIS OF THE DYNAMICS OF CONTROLLED INDUSTRIAL TRANSPORT ROBOTS
103
ANALYSIS OF THE DYNAMICS OF CONTROLLED INDUSTRIAL TRANSPORT ROBOTS
104
Analysis of the Dynamics of Housing Tenure Choice in Britain
105
Analysis of the dynamics of soil infiltrability of agricultural soils from continuous rainfall-runoff measurements on small plots
106
Analysis of the Dα spectral line shape on the carbon limiter insertion experiments in Heliotron J
107
Analysis of the E. coli NifS CsdB protein at 2.0 Å reveals the structural basis for perselenide and persulfide intermediate formation
108
Analysis of the Earth Dams Function against the Effects of Long- Term Deposition in Reservoirs (Polrood Earth Dam- Guilan Province)
109
Analysis of the Earth Movement over the Equatorial Region by using the Ionosonde Observation Data
110
Analysis of the earth-sheltered buildingsʹ heating and cooling energy demand depending on type of soil
111
Analysis of the earthworm coelomocyte cell surface for the presence of Toll-like immune receptors
112
Analysis of the eastern Pacific yellowfin tuna fishery based on multiple management objectives
113
Analysis of the eastern Pacific yellowfin tuna fishery based on multiple management objectives
114
Analysis of the Ecetoc Aquatic Toxicity (EAT) database I — General introduction
115
Analysis of the ecetoc aquatic toxicity (EAT) database II — Comparison of acute to chronic ratios for various aquatic organisms and chemical substances
116
Analysis of the ecetoc aquatic toxicity (EAT) database III — Comparative toxicity of chemical substances to different life stages of aquatic organisms
117
Analysis of the ecetoc aquatic toxicity (EAT) database IV — Comparative toxicity of chemical substances to freshwater versus saltwater organisms
118
Analysis of the ecetoc aquatic toxicity (EAT) database V — The relevance of Daphnia magna as a representative test species
119
Analysis of the Echinococcus granulosus Laminated Layer Carbohydrates by Lectin Blotting
120
Analysis of the ecological vulnerability of the western Hainan Island based on its landscape pattern and ecosystem sensitivity
121
ANALYSIS OF THE ECONOMIC EFFICIENCY IN FODDER PRODUCING
122
Analysis of the economic impact of different Chinese climate policy options based on a CGE model incorporating endogenous technological change
123
Analysis of the economy of scale and estimation of the future hydrogen production costs at on-site hydrogen refueling stations in Korea
124
Analysis of the ecosystem structure of Laguna Alvarado, western Gulf of Mexico, by means of a mass balance model
125
Analysis of the educational implications of positive thinking in Nahj al-Balaghah with emphasis on theology and its validity
126
Analysis of the eect of temperature on the morphology of egg shell calcium oxide catalyst: Catalyst production for biodiesel preparation
127
Analysis of the EEG dynamics of epileptic activity in gelastic seizures using decomposition in independent components
128
ANALYSIS OF THE EFECCTIVENESS OF TURKISH MILITARY ACADEMY PHYSICAL EDUCATION PROGRAM WITH RESPECT OF TECHNOLOGICAL ADVANCEMENT
129
Analysis of the effect and potential of energy conservation in China
130
Analysis of the Effect and Prognostic Factors Associated with Postural and Instrumental Reduction in Thoracolumbar Burst Fractures
131
Analysis of the effect of a compliant layer on indentation of an elastic material
132
Analysis of the effect of a textured surface on fretting fatigue
133
Analysis of the effect of alloy elements on martensitic transformation in titanium alloy with the use of valence electron structure parameters
134
Analysis of the effect of annealing on the photoluminescence spectra of Cu+ ion implanted ZnS nanoparticles
135
Analysis of the effect of biaxial loading on the fracture toughness of reactor pressure-vessel steels
136
Analysis of the Effect of Chimeric Chitinase Expressed by Synthetic Promoter in T2 Generation of Transgenic Canola
137
Analysis of the effect of cold-working of rivet holes on the fatigue life of an aluminum alloy
138
Analysis of the effect of collisions on the gravitational motion of large particles in a vertical duct
139
Analysis of the Effect of Competitive Intelligence on Strategic Decision Making in Small and Medium-Sized Food Enterprises
140
Analysis of the effect of concentration on the acid–base properties of soil fulvic acid. Conformational changes
141
Analysis of the Effect of Cytokines (Interleukins 2, 3, 4, and 6, Granulocyte-Monocyte Colony-Stimulating Factor, and Interferon-γ) on Generation of Primary Cytotoxic T Lymphocytes against a Weakly Immunogenic Tumor
142
Analysis of the effect of Deep Cryogenic Treatment on the hardness and microstructure of X30 CrMoN 15 1 steel
143
Analysis of the effect of different NKT cell subpopulations on the activation of CD4 and CD8 T cells, NK cells, and B cells
144
Analysis of the effect of disturbed flow on monocytic adhesion to endothelial cells
145
Analysis of the Effect of Empowering Women on the Motivation of Creating and Developing Rural Businesses (Case Study: Kermanshah Province, Iran)
146
Analysis of the Effect of Financial Policy (Income Tax) on Income Distribution in Iran with ARDL Approach
147
Analysis of the effect of finite d.c. blocking capacitance and finite d.c. feed inductance on the performance of inverse class-E amplifiers
148
Analysis of the Effect of Green Packaging on Attracting and Retaining Environmentally Friendly Customers with the Mediating role of Green Brand Image
149
Analysis of the Effect of Health Disaster Risk Shocks on Macroeconomic Variables: An Application of Dynamic Stochastic General Equilibrium Models
150
Analysis of the effect of heating and re-curing on the microstructure of high-strength concrete using X-ray CT
151
Analysis of the effect of high hydrostatic pressure treatment and enterocin AS-48 addition on the bacterial communities of cherimoya pulp
152
Analysis of the effect of immunization in rabies time series
153
Analysis of the Effect of Indenter Deformation and Presence of Voids on Silicon Nanoindentation Using Molecular Dynamics Simulation
154
Analysis of the effect of interaction between shear and bending load on the buckling strength of cylindrical shells Original Research Article
155
Analysis of the effect of interaction between shear and bending loads on the buckling strength of cylindrical shells Original Research Article
156
Analysis of the effect of inter-bar currents on the performance of polyphase cage-induction motors
157
Analysis of the effect of load direction on the stress distribution in dental implant
158
Analysis of the effect of lubrication performance on motor operated valve actuator output thrust
159
Analysis of the effect of lying on the ear on body temperature measurement using a tympanic thermometer
160
Analysis of the Effect of Macroeconomic Variables on Fluctuation of Future Gold Market in Iran
161
Analysis of the effect of material properties on the hydroforming process of tubes
162
Analysis of the effect of mechanical recycling upon tensile strength of a short glass fibre reinforced polyamide 6,6
163
Analysis of the effect of meteorological factors on dewfall Original Research Article
164
Analysis of the effect of micro-crack on the plastic strain ahead of main crack in aluminium alloy 2024 T3
165
Analysis of the effect of microscale turbulence on atmospheric chemical reactions by means of the p.d.f. approach
166
Analysis of the Effect of Monetary Policy Development on Equity Prices in Nigeria.
167
Analysis of the effect of multiple genetic variants of cardiovascular disease risk on insulin concentration variability in healthy adults of the STANISLAS cohort: The role of FGB −455 G/A polymorphism
168
Analysis of the effect of nano-roughness on the friction of a vitreous polymer
169
Analysis of the effect of Nb3Sn strand bending on CICC superconductor performance Original Research Article
170
Analysis of the effect of notch–inclusion interaction in a plate under tensile load
171
Analysis of the effect of nutritional factors on OTA and OTB biosynthesis and polyketide synthase gene expression in Aspergillus ochraceus
172
Analysis of the effect of organic matter content on the architecture and sinking of sediment aggregates
173
Analysis of the effect of oxygen doping and pressure on superconducting transition temperature in metal oxides
174
Analysis of the effect of parasitic resistances on the performance of photovoltaic modules
175
Analysis of the effect of partial vitrification on stress development in cryopreserved blood vessels
176
Analysis of the Effect of Periodic Magnetic Field, Heat Absorption/Generation and Aspect Ratio of the Enclosure on Non-Newtonian Natural Convection
177
Analysis of the Effect of Pile Skin Resistance Verses Pile Diameter Based on Experimental Research
178
Analysis of the Effect of Price Liberalization Policy on Production of the Main Crops Grown in New Halfa Agricultural Corporation
179
Analysis of the effect of production process parameters and density of expanded polystyrene insulation boards on mechanical properties and thermal conductivity
180
ANALYSIS OF THE EFFECT OF PROPELLANT TEMPERATURE ON INTERIOR BALLISTICS PROBLEM
181
Analysis of the effect of radio frequency interference on the DC performance of bipolar operational amplifiers
182
Analysis of the Effect of Radio Frequency Interference on the DC Performance of CMOS Operational Amplifiers
183
Analysis of the Effect of Recreational Sports Development on Health and Participation of Students in Sports Activities
184
Analysis of the Effect of Regional Creativity on Regional Economic Growth within New Economic Geographical Models
185
Analysis of the effect of reinforcement particles on the compressibility of Al–SiC composite powders using a neural network model
186
Analysis of the effect of security on data and voice traffic in WLAN
187
Analysis of the Effect of Separate Collection on the Composition of Mixed Municipal Solid Waste in Italy
188
Analysis of the Effect of Service Quality, Knowledge Level, and Islamic Financial Literacy Level on Muslim Community Decisions to Use Islamic Bank Services
189
Analysis of the effect of Si content on the creep response of an Mg–5Al–Mn alloy
190
Analysis of the Effect of Solar Temperature and Radiation on Characteristics I-V on 170 WP Photovoltaic Module Based on Matlab Simulink
191
Analysis of the effect of stent emplacement on LDL transport within an artery
192
Analysis of the effect of stiffener on the buckling capacity and non-elastic behavior of bracing gusset plates
193
Analysis of the effect of stiffener profile on buckling strength in composite isogrid stiffened shell under axial loading
194
Analysis of the effect of stitching on the fatigue strength of single-lap composite joints
195
Analysis of the effect of stray capacitance on an ac-based capacitance tomography transducer
196
Analysis of the effect of swimmerʹs head position on swimming performance using computational fluid dynamics
197
Analysis of the Effect of TDS on the Stability of Nanoemulsified Oil
198
Analysis of the effect of temperature on complex self-oscillation regimes in the belousov-zhabotinskii reaction in a constant-agitation flow-through reactor
199
Analysis of the effect of temperature on the creep parameters of composite material
200
Analysis of the Effect of the Concentration of Rhodamine B in Ethanol on the Fluorescence Spectrum Using the Gauss Mod Function
201
Analysis of the effect of the forces during gait on the fracture behaviour in cement of reconstructed acetabulum
202
Analysis of the Effect of the Group Psychological Counseling Program on Anxiety Levels and Life Satisfaction Levels of Mothers with a Child with Special Needs
203
Analysis of the effect of the implementation of photovoltaic systems like option of distributed generation in Colombia
204
Analysis of the Effect of the Swirl Flow Intensity on Combustion Characteristics in Liquid Fuel Powered Confined Swirling Flames
205
Analysis of the effect of turbulence promoters in hollow fiber membrane distillation modules by computational fluid dynamic (CFD) simulations
206
Analysis of the effect of upconversion on signal amplification in erbium-doped fiber amplifiers (EDFAs)
207
Analysis of the effect of using variable speed electric water pump on the engine cooling system of a passenger car
208
Analysis of the effect of various unit costs on the optimal incoming quantity in a perishable inventory model
209
Analysis of the effect of vibrations on the micro-EDM process at the workpiece surface
210
Analysis of the effect of viscous dissipation for laminar flow in stadium-shaped ducts
211
Analysis of the effect of wax content on bitumen under performance grade classification
212
ANALYSIS OF THE EFFECTIVE ELASTIC PROPERTIES OF A UNIDIRECTIONAL GLASS-REINFORCED PLASTIC BY THE GENERALIZED SELF-CONSISTENCY METHOD
213
ANALYSIS OF THE EFFECTIVE ELASTIC PROPERTIES OF A UNIDIRECTIONAL GLASS-REINFORCED PLASTIC BY THE GENERALIZED SELF-CONSISTENCY METHOD
214
Analysis of the Effective Key Factors on Process-based Innovations in Sugarcane Industries via Meta-Synthesis
215
Analysis of the Effective Parameters on Potato Powder
216
Analysis of the effective thermal conductivity of fractal porous media
217
Analysis of the Effectiveness of a Two-Stage Three-Phase Grid-Connected Inverter for Photovoltaic Applications
218
ANALYSIS OF THE EFFECTIVENESS OF FARMER FIELD SCHOOLS INCOMMUNICATING NEW SKILLS AND KNOWLEDGE TO FARMERS IN KHYBER PAKHTUNKHWA, PAKISTAN
219
Analysis of the effectiveness of space debris mitigation measures using the delta model Original Research Article
220
Analysis of the effectiveness of the first European Pollutant Emission Register (EPER)
221
Analysis of the effectiveness of the NEC Directive on the tropospheric ozone levels in Portugal
222
Analysis of the effects diclofenac has on Japanese medaka (Oryzias latipes) using real-time PCR Original Research Article
223
Analysis of the effects of a passing cloud on a grid-interactive photovoltaic system with battery storage using neural networks
224
Analysis of the Effects of Agricultural Inputs Price Liberalization on the Production of Sunflower in Khoy Zone
225
Analysis of the effects of combining air separation with combustion in a zero emissions (ZEITMOP) cycle
226
Analysis of the effects of combustion emissions and Santa Ana winds on ambient ozone during the October 2007 southern California wildfires
227
Analysis of the effects of compressive stresses on fatigue crack propagation rate
228
Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys
229
Analysis of the effects of custom-moulded foot orthotics
230
Analysis of the effects of different scenarios of historical data availability on the calibration of a spatially-distributed hydrological model
231
Analysis of the effects of disk tilt on the differential-phase-detection signal in a high-density DVD read-only disk driver
232
Analysis of the effects of exfoliation corrosion on the fatigue behaviour of the 2024-T351 aluminium alloy using the fatigue damage map
233
Analysis of the effects of growth hormone, voluntary exercise, and food restriction on diaphyseal bone in female F344 rats
234
ANALYSIS OF THE EFFECTS OF GSM BANDS TO THE ELECTROMAGNETIC POLLUTION IN THE RF SPECTRUM
235
Analysis of the Effects of Hazelnut Cultivation in Rural Development of Guilan Province (Case study of Amlash County)
236
Analysis of the Effects of Housing Quality on Health (Physical and Mental) of Villagers (Case Study: Villages of Shandiz District in Binaloud County)
237
Analysis of the effects of human activities on the hydromorphological evolution channel of the Saint-Maurice River downstream from La Gabelle dam (Quebec, Canada)
238
Analysis of the effects of land use change on protected areas in the Philippines
239
Analysis of the effects of magnetic field on the induced stress in drilled plates
240
Analysis of the Effects of Mixing Height and Other Associated Factors on the Effective Dispersion of Plume
241
Analysis of the effects of nitric oxide and oxygen on nitric oxide production by macrophages
242
Analysis of the effects of osmoprotectants on the high osmolality-dependent induction of increased thermotolerance inSalmonella typhimurium Original Research Article
243
Analysis of the effects of outdoor and accelerated ageing on the optical properties of reflector materials for solar energy applications
244
Analysis of the effects of particle size and densification on NIR spectra
245
Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach
246
Analysis of the effects of processing parameters on mechanical properties and formability of cold rolled low carbon steel sheets using neural networks
247
Analysis of the Effects of Radiolytic-Gas Bubbles on the Operation of Solution Reactors for the Production of Medical Isotopes
248
Analysis of the effects of reformate (hydrogen/carbon monoxide) as an assistive fuel on the performance and emissions of used canola-oil biodiesel
249
Analysis of the effects of rotational larviciding on aquatic fauna of two Guinean rivers: the case of permethrin
250
Analysis of the effects of rotational woodlots on the nutrition and yield of maize following trees in western Tanzania
251
Analysis of the Effects of Social and Economic Factors on Energy Consumption, with Emphasis on Family Travel Patterns (Case Study: Malek-Shahr and Amir-Arab Neighborhoods in Isfahan)
252
Analysis of the effects of soil management on runoff generation in olive orchards using a physically based model.
253
Analysis of the effects of surface stiffness on the contact interaction between a finger and a cylindrical handle using a three-dimensional hybrid model
254
Analysis of the Effects of the Frequency Band Values on the Performance of the Cosine Modulated Filter Bank Design
255
Analysis of the effects of the global financial crisis on the Turkish economy, using hierarchical methods
256
Analysis of the Effects of the Guide Plans on the Modernization of Lifestyles in Rural Households (Case Study: Central District of Darab County, Iran)
257
Analysis of the Effects of the WeChat Health Management Platform on the Self-care Ability and Quality of Life of Patients with Liver Cancer Undergoing Interventional Therapy
258
Analysis of the effects of time delay in nonlinear systems using generalised frequency response functions
259
Analysis of the effects of treatment of human Schistosoma mansoni infection on the immune response of patients from endemic areas
260
Analysis of the effects of wet and dry seasons on a Mediterranean river basin: Consequences for coastal waters and its quality management
261
Analysis of the Efficacy and Safety of Teriparatide and Alendronate in the Treatment of Osteoporosis After Renal Transplantation
262
Analysis of the efficacy of a Two-Stage methodology for ant colony optimization: Case of study with TSP and QAP
263
Analysis of the Efficacy of Cinnamon for Patients with Diabetes Mellitus Type II Based on Traditional Persian Medicine Syndrome Differentiation: A Randomized Controlled Trial
264
Analysis of the efficiency and multifractality of gold markets based on multifractal detrended fluctuation analysis
265
Analysis of the Efficiency of China’s Medical Service Resources under the Background of Hierarchical Medical Policy
266
Analysis of the efficiency of crisis management of local communities in the face of floods due to climate change: five selected villages of port Chabahar County, Iran
267
Analysis of the efficiency of local government services delivery. An application to urban public transport
268
Analysis of the efficiency of the Chor–Rivest cryptosystem implementation in a safe-parameter range
269
Analysis of the efficiency of the Iberian power futures market
270
Analysis of the efficiency of the rabbit whey acidic protein gene 5 flanking region in controlling the expression of homologous and heterologous linked genes
271
Analysis of the efficiency of the Shanghai stock market: A volatility perspective
272
Analysis of the efficiency of urban commercial vehicle tours: Data collection, methodology, and policy implications
273
Analysis of The Efficiency Performance Of Cooperatives In Indonesia: Analysis Of Provincial Cooperatives Using The Data Envelopment Analysis Approach
274
Analysis of the Efficiency R and D Projects base on BSC-DEA Approach with Restrictions on Weight of Inputs and Outputs
275
Analysis of the eigenvalue equation of the FEL amplifier with axisymmetric electron beam and diaphragm focusing line
276
Analysis of the eigenvalue equation of the FEL amplifier with axisymmetric electron beam and diaphragm focusing line
277
Analysis of the elastic characteristics at die and workpiece to improve the dimensional accuracy for cold forged part
278
Analysis of the elastic characteristics at forging die for the cold forged dimensional accuracy
279
Analysis of the elastic properties of an interpenetrating AlSi12–Al2O3 composite using ultrasound phase spectroscopy
280
Analysis of the elastic punch-substrate contact under fretting: Monotonic and cyclic loading of the punch
281
Analysis of the elastic punch-substrate contact under fretting: Monotonic and cyclic loading of the punch
282
Analysis of the elastic punch-substrate contact under fretting: Monotonic and cyclic loading of the punch
283
Analysis of the electrical and rheological behavior of different processed CNF/PMMA nanocomposites
284
Analysis of the electrical behaviour of conductor/insulator composites using effective medium theories
285
Analysis of the electrical conductivity in milking fractions as a mean for detecting and characterizing mastitis in goats
286
Analysis of the electrical properties of p–n GaAs homojunction under dc and ac fields
287
Analysis of the electrical properties of PZT by a BP artificial neural network
288
Analysis of the electrochemical behaviors of WC–Co alloy for micro ECM
289
Analysis of the electroencephalographic activity associated with thalamic tumors
290
Analysis of the electromechanical behavior of ferroelectric ceramics based on a nonlinear finite element model
291
Analysis of the electromechanical vibrations in induction motor drives due to the imperfections of the mechanical transmission system Original Research Article
292
Analysis of the Electron Localization, the Anisotropy of Electrical Conductivity, the Orbital Ordering, and SpinExchange Interactions in BaVS3 on the Basis of First Principles and Semi-empirical Electronic Structure Calculations
293
Analysis of the Electron Localization, the Anisotropy of Electrical Conductivity, the Orbital Ordering, and SpinExchange Interactions in BaVS3 on the Basis of First Principles and Semi-empirical Electronic Structure Calculations
294
Analysis of the electron/pion separation capability with real size ALICE TRD prototypes using a neural network algorithm
295
Analysis of the electron/pion separation capability with real size ALICE TRD prototypes using a neural network algorithm
296
Analysis of the electronic configuration of the pulsed laser deposited La0.7Ca0.3MnO3 thin films
297
Analysis of the electronic structure of Hf(Si0.5As0.5)As by X-ray photoelectron and photoemission spectroscopy
298
Analysis of the electronic structure of human hemoglobin from soft X-ray emission
299
Analysis of the electronic structure of hydrogenated amorphous carbon via Auger spectroscopy
300
Analysis of the electronic structure of intermetallic compounds, and application to structural defects in B2 phases
301
Analysis of the electronic transition of the 2,1-hydroxypropylperoxy radical using cavity ringdown spectroscopy
302
Analysis of the electrostatic force on a dielectric particle with partial charge distribution
303
Analysis of the electrostatic potential difference in aqueous polymer two-phase systems
304
Analysis of the Elements of Self-Care Training Curriculum for Iranian Red Crescent Society (IRCS) Relief Workers Based on the Akker Model
305
Analysis of the emission performance of field emitter with Laplace interpolation method
306
Analysis of the Emission Reduction through PerformanceImprovement of Intersection and Network nearby Using MicroSimulation Program
307
Analysis of the emissions of volatile organic compounds from the compression ignition engine fueled by diesel–biodiesel blend and diesel oil using gas chromatography
308
Analysis of the enantioselectivities and initial rates of the hydrosilylation of acetophenone catalyzed by [Rh(cod)Cl]2/(chiral diphosphine). The quantitative analysis of ligand effects
309
Analysis of the endogenous human serum peptides by on-line extraction with restricted-access material and HPLC-MS/MS identification
310
Analysis of the energy access improvement and its socio-economic impacts in rural areas of developing countries
311
Analysis of the energy and environmental effects of green car deployment by an integrating energy system model with a forecasting model
312
Analysis of the energy budget in turbulent channel flow using orthogonal wavelets
313
Analysis of the energy distribution of interface traps related to tunnel oxide degradation using charge pumping techniques for 3D NAND flash applications
314
Analysis of the energy efficiency of an integrated ethanol processor for PEM fuel cell systems
315
Analysis of the energy efficiency of innovative ATR-based PEM fuel cell system with hydrogen membrane separation
316
Analysis of the energy efficiency of solar aided biomass gasification for pure hydrogen production
317
Analysis of the energy intensity evolution in the Brazilian industrial sector—1995 to 2005
318
ANALYSIS OF THE ENERGY POTENTIAL OF AGRICULTURAL BIOMASS RESIDUES IN MONTENEGRO
319
Analysis of the energy transmission in compound cylindrical shells with and without internal heavy fluid loading by boundary integral equations and by Floquet theory
320
Analysis of the energy transmission in spatial piping systems with heavy internal fluid loading
321
Analysis of the energy transport and deposition within the reaction chamber of the Prometheus inertial fusion energy reactor
322
Analysis of the Energy-Based Control for Swinging Up Two Pendulums
323
Analysis of the entanglements in carbon nanotube fibers using a self-folded nanotube model
324
Analysis of the enthalpies of transfer of Co(II) ion in mixed solvents by means of the theory of preferential solvation
325
Analysis of the Environmental Projects Risk Management Success Using Analytical Network Process Approach
326
Analysis of the enzymatic activity of mycelial and yeast phases of Penicillium marneffei
327
Analysis of the enzymatic activity of mycelial and yeast phases of Penicillium marneffei
328
Analysis of the enzymatic formation of citral in the glands of sweet basil
329
Analysis of the enzymatic racemization of d-aspartic acid to l-aspartic acid by the on-line coupling of a solid-phase extraction column and a ligand-exchange high-performance liquid chromatography column
330
Analysis of the enzyme network involved in cattle milk production using graph theory
331
Analysis of the epistatic and QTL×environments interaction effects of plant height in maize (Zea mays L.)
332
Analysis of the equal principal angles assumption in the shear design of reinforced concrete members
333
Analysis of the equilibrated residual method for a posteriori error estimation on meshes with hanging nodes Original Research Article
334
Analysis of the equilibrium conditions of a double rotor turbine prototype designed for the exploitation of the tidal currents
335
Analysis of the equine tumor suppressor gene p53 in the normal horse and in eight cutaneous squamous cell carcinomas
336
ANALYSIS OF THE EQUIVALENT CIRCUIT OF PIEZOELECTRIC CERAMIC DISK RESONATORS IN COUPLED VIBRATION
337
Analysis of the error in the standard approximation used for multiplication of triangular and trapezoidal fuzzy numbers and the development of a new approximation
338
Analysis of the errors associated with typical pulverized coal char combustion modeling assumptions for oxy-fuel combustion
339
Analysis of the Errors Produced by the 2004 BBN Speech Recognition System in the DARPA EARS Evaluations
340
Analysis of the Escherichia coli glucosamine-6-phosphate synthase activity by isothermal titration calorimetry and differential scanning calorimetry
341
Analysis of the essence of modern motivational concepts
342
Analysis of the essential oil chemical profiles of two Orobanche species: O. laxissima Uhlich Rätzel and O. ramosa L.
343
Analysis of the essential oil composition from the different parts of Eryngium glaciale Boiss. from Spain
344
Analysis of the essential oil composition of eight Anthemis species from Greece
345
Analysis of the essential oil from aerial parts of Eupatorium cannabinum subsp. corsicum (L.) by gas chromatography with electron impact and chemical ionization mass spectrometry
346
ANALYSIS OF THE ESSENTIAL OIL OF NEPETA SINTENISII BORNM. FROM IRAN
347
ANALYSIS OF THE ESSENTIAL OILS OF TWO CULTIVATED BASIL (OCIMUM BASILICUM L.) FROM IRAN
348
Analysis of the essential oils of two Thymus species from Iran
349
Analysis of the estimation error in a parsimonious temperature-temperature characterization technique
350
Analysis of the etching behavior of ZnO ceramics
351
Analysis of the etching behavior of ZnO ceramics Original Research Article
352
Analysis of the ethyl chloride ν9 band by means of the assignment of new far infrared laser lines
353
Analysis of the EU policy package on climate change and renewables
354
Analysis of the EU renewable energy directive by a techno-economic optimisation model
355
Analysis of the evaluation process of the research performance: An empirical case
356
Analysis of the evaporation and re-condensation processes induced by pulsed beam treatments
357
Analysis of the evaporation coefficient and the condensation coefficient of water
358
Analysis of the event of 2004 November 10
359
Analysis of the events of failures of pipelines made of austenitic steel in nuclear power-generating industry
360
Analysis of the evolution of farmers’ early retirement policy in Spain. The case of Castille and León
361
Analysis of the evolution of ground movements in a low densely urban area by means of DInSAR technique
362
Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys
363
Analysis of the evolution of the family of the Sig genes encoding plant sigma factors
364
Analysis of the evolution of the grain size distribution in WC–Co sintered materials with random set models
365
Analysis of the evolution of the grain size distribution in WC–Co sintered materials with random set models
366
Analysis of the evolution of the pore size distribution and the pore network connectivity of a porous carbon during activation Original Research Article
367
Analysis of the evolution to an IP-based UMTS terrestrial radio access network
368
Analysis of the exclusive semileptonic decay image within a light-front constituent quark model Original Research Article
369
Analysis of the expansion of hydroxyapatite laser ablation plumes
370
Analysis of the expected AGIPD detector performance parameters for the European X-ray free electron laser
371
Analysis of the expected AGIPD detector performance parameters for the European X-ray free electron laser
372
Analysis of the expected discounted penalty function for a general jump–diffusion risk model and applications in finance
373
Analysis of the experimental behaviour of a 100 kWth latent heat storage system for direct steam generation in solar thermal power plants
374
Analysis of the experimental compressibility of deep water marine sediments from the Gulf of Guinea
375
Analysis of the experimental data on a low cycle fatigue under nonproportional straining
376
Analysis of the experimental flexural behaviour of a concrete beam grid reinforced with C-FRP bars
377
Analysis of the experimental variability in wheat responses to elevated CO2 and temperature
378
Analysis of the explosive cladding of cu–low carbon steel plates
379
Analysis of the expression and antioxidative property of a peroxiredoxin 6 from Scophthalmus maximus
380
Analysis of the expression level of aquaporins under acetylene treatment and pathogen attack
381
Analysis of the Expression of Dopamine Receptors, DRD1 and DRD5, in Cancerous Tissue of Patients with Breast Cancer and the Impact of Quercetin on the Expression of These Receptors in Hs578t and HDF Cell Lines
382
Analysis of the expression of immunoglobulins throughout lactation suggests two periods of immune transfer in the tammar wallaby (Macropus eugenii)
383
Analysis of the expression of immunoglobulins throughout lactation suggests two periods of immune transfer in the tammar wallaby (Macropus eugenii)
384
Analysis of the expression of putative heat-stress related genes in relation to thermotolerance of cork oak
385
Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress
386
Analysis of the extension of Q-waves after infarction with body surface map: Relationship with infarct size
387
ANALYSIS OF THE EXTENT TO WHICH INDIVIDUAL AND INSTITUTIONAL FACTORS ARE RESPONSIBLE FOR LACK OF INCLINATION TOWARDS QUALITY RESEARCH IN PAKISTAN
388
Analysis of the exterior colour of agroindustrial buildings: a computer aided approach to landscape integration
389
Analysis of the extreme diversity of salivary alpha-amylase isoforms generated by physiological proteolysis using liquid chromatography–tandem mass spectrometry
390
Analysis of the fabrication process of Nb/Al-AlN/sub x//Nb tunnel junctions with low R/sub n/A values for SIS mixers
391
Analysis of the Factors Affecting Brand Value of Iranian Futsal Premier League Clubs
392
Analysis of the factors affecting customersʹ purchase intention: The mediating role of perceived value
393
Analysis of the factors affecting customersʹ purchase intention: The mediating role of perceived value
394
Analysis of the Factors Affecting Surgical Success of Implants Placed in Iranian Warfare Victims
395
Analysis of the Factors Affecting the Adoption of Management Information Systems
396
Analysis of the factors affecting the changes in the rural land-use system (case study: Astane-ye-Ashrafiyeh rural areas in the north of Iran)
397
Analysis of the factors affecting the instrument and machinery assets in enterprises that deal with agricultural production: The case of Erzurum Province
398
Analysis of the Factors Affecting the Interval between Blood Donations Using Log-Normal Hazard Model with Gamma Correlated Frailty
399
Analysis of the Factors Influencing Enterprise and Government Participation in the Medicines Patent Pool Based on System Dynamics Model
400
Analysis of the factors involved in failure of a brass sleeve mounted on an electro-valve
401
Analysis of the factors related to mortality in patients with primary brain and central nervous system tumors
402
Analysis of the factors that affect the distribution and abundance of three Neobuxbaumia species (Cactaceae) that differ in their degree of rarity
403
Analysis of the factors that influence venture capital fundraising: An empirical study in China
404
Analysis of the factors that significantly influence the stability of fluoroquinolone–metal complexes Original Research Article
405
Analysis of the failure mechanism of a gripping tool steel component operated in an industrial tube draw bench
406
Analysis of the failure mechanisms of a weak rock through photogrammetrical measurements by 2D and 3D visions
407
Analysis of the failure mode and softening behaviour of sands in true triaxial tests
408
Analysis of the failure of a cast iron pipe during its pressure test
409
Analysis of the Failure of Iran’s Economic Development Process in the Transition from Natural State During 1941-1979
410
Analysis of the fall of TPM in companies
411
Analysis of the fatal crash involvements of 15-year-old drivers
412
Analysis of the fatigue behaviour characterized by stiffness and permanent deformation for different distal volar radius compression plates
413
Analysis of the fatigue failure of a mountain bike front shock
414
Analysis of the fatigue life of riveted sheet metal helicopter airframe joints
415
Analysis of the fatigue strength of a stainless steel based on the energy dissipation
416
Analysis of the fatty acid components in a perchloric acid-soluble protein
417
Analysis of the feasibility of the recovery of landfill gas: a case study of Mexico
418
Analysis of the FEL-RF interaction in recirculating, energy-recovering linacs with an FEL
419
Analysis of the FEL-RF interaction in recirculating, energy-recovering linacs with an FEL
420
Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels
421
Analysis of the field of physical chemistry of surfactants with the Unified Scienctometric Model. Fit of relational and activity indicators
422
ANALYSIS OF THE FIELDS IN THREE DIMENSIONAL CASSEGRAIN SYSTEM
423
ANALYSIS OF THE FIELDS IN TWO DIMENSIONAL CASSEGRAIN SYSTEM
424
Analysis of the filterability in industrial MBRs. Influence of activated sludge parameters and constituents on filterability
425
Analysis of the Filtered-X LMS Algorithm and a Related New Algorithm for Active Control of Multitonal Noise
426
Analysis of the finescale timing of repeated signals: does shell rapping in hermit crabs signal stamina?
427
Analysis of the First Bridge Diagram of Liquid Bromine
428
Analysis of the first electron-removal states of Ba2Cu3O4Cl2 using polarization dependent angle-resolved photoelectron spectroscopy
429
Analysis of the first RHIC results in the string fusion model
430
Analysis of the FIST integral tests 4DBA1, 6SB2C and T1QUV with TRAC-BFl/v2001.2
431
Analysis of the fixed oils of the genus Nigella L. (Ranunculaceae) in Turkey
432
Analysis of the flame formed during oxidation of pulverized coal by an O2---CO2 mixture
433
Analysis of the flamelet concept in the numerical simulation of laminar partially premixed flames
434
Analysis of the flavonoid component of bioactive New Zealand mānuka (Leptospermum scoparium) honey and the isolation, characterisation and synthesis of an unusual pyrrole
435
ANALYSIS OF THE FLEXURAL VIBRATION OF A THIN-PLATE BOX USING A COMBINATION OF FINITE ELEMENT ANALYSIS AND ANALYTICAL IMPEDANCES
436
Analysis of the flow and heat transfer characteristics for assisting incompressible laminar flow past an open cavity
437
Analysis of the flow behavior of electrorheological fluids with the aligned structure reformation
438
Analysis of the flow field in a high-pressure homogenizer
439
Analysis of the flow field induced by the sessile peritrichous ciliate Opercularia asymmetrica
440
Analysis of the flow in a thermo-acoustic MHD generator with conducting walls
441
Analysis of the flow in inhomogeneous particle beds using the spatially averaged two-fluid equations
442
Analysis of the flow structure and heat transfer in a vertical mantle heat exchanger
443
Analysis of the flow-induced vibrations of viscoelastically supported rectangular plates
444
Analysis of the fluid weighted fair queueing system
445
Analysis of the fluid weighted fair queueing system
446
Analysis of the fluid-elastic vibration of a U-bend tube bundle induced by cross-flow in PWR steam generators Original Research Article
447
Analysis of the fly ash from the processing of wood chips in a pilot-scale downdraft gasifier: Comparison of inorganic constituents determined by PIXE and ICP-AES
448
Analysis of the Folding Pathway of Chymotrypsin Inhibitor by Correlation of Φ-values with Inter-residue Contacts
449
ANALYSIS OF THE FOOD CONSUMPTION OF 87 ELDERLY NURSING HOME RESIDENTS, DEPENDING ON FOOD TEXTURE
450
Analysis of the Force Exerted on an Accelerated Beam of Electrons by Its Own Wakefield in the Laser-Driven Rf-gun
451
Analysis of the Forces Acting on Apex Seal of A Wankel Engine
452
Analysis of the forces in ordered FCC packings with different orientations
453
Analysis of the force-sharing problem using an optimization model
454
Analysis of the formation of CH+ in collision of C2+ ions with molecular hydrogen
455
Analysis of the formation of plastic deformation layer on the surface of polycrystalline metals subjected to a micro-size high-rate shot impact
456
Analysis of the formation of plastic deformation layer on the surface of polycrystalline metals subjected to a micro-size high-rate shot impact
457
Analysis of the formation of the price bubble in the financial market: with an emphasis on the price bubble in the insurance industry and the stock market with the Markov-switching approach
458
Analysis of the formation of ZrO2:Y2O3 solid solution by the electrochemical impedance spectroscopy technique
459
Analysis of the fractal clustering of ore deposits in the Spanish Iberian Pyrite Belt
460
Analysis of the fracture behavior of hydrided fuel cladding by fracture mechanics
461
Analysis of the fracture behavior of hydrided fuel cladding by fracture mechanics Original Research Article
462
Analysis of the fracture behavior of Radiata Pine timber and Laminated Veneer Lumber
463
Analysis of the fracture behaviour of an aluminide coating on a single-crystal superalloy under tensile conditions
464
Analysis of the fracture behaviour of an aluminide coating on a single-crystal superalloy under tensile conditions
465
Analysis of the Fracture of a Turbine Blade
466
Analysis of the fracture of a turbine blade on a turbojet engine
467
Analysis of the free vibration of a coupled plate/fluid interacting system and interpretation using sub-system modal energy
468
Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method
469
Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method
470
Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method
471
Analysis of the free-edge effect in composite laminates by the boundary finite element method
472
Analysis of the Frequency Effects on Design and Back-Iron Characteristics of Double-Layer Secondary Single-Sided Linear Induction Motors
473
Analysis of the frequency of GNAS codon 201 mutations in advanced colorectal cancer
474
Analysis of the Frequency Response of Carbon Nanotube Transistors
475
Analysis of the frequency-domain block LMS algorithm
476
Analysis of the friction and wear behavior of hot work tool scale: application to the hot rolling process
477
Analysis of the friction and wear behaviour of hot work tool steel for forging
478
Analysis of the frost growth on a flat plate by simple models of saturation and supersaturation
479
Analysis of the Functional Independence Measure Value of Cervical Spine Injury Patients with Conservative Management
480
Analysis of the Functional Potential of Mouse CD4+ T Cells Using a High-Efficiency Cloning System
481
Analysis of the furling behavior of small wind turbines
482
Analysis of the fusion hindrance phenomenon for 58Ni+54Fe fusion reaction using cold nuclear matter properties
483
Analysis of the fuzzy set literature using phrases
484
Analysis of the gas compressibility effects on the constant-entropy reversible processes of refrigerants and refrigerant mixtures
485
Analysis of the Gas Flow in a Labyrinth Seal of Variable Pitch
486
Analysis of the gas transport performance through PDMS/PS composite membranes using the resistances-in-series model
487
Analysis of the gasoline consumption on an international scale: A data mining approach
488
Analysis of the Ge1 xCx films deposited by MFMST
489
Analysis of the gelation process of hybrid silica–zirconia and silica–titania gels using two different grafted electroactive probes
490
Analysis of the Gene Encoding Cyclomaltodextrinase from AlkalophilicBacillussp. I-5 and Characterization of Enzymatic Properties
491
Analysis of the General Intelligence subtest of the Luria-Nebraska Neuropsychological Battery III
492
Analysis of the generalized self-shrinking generator
493
Analysis of the Generation and Segregation of Propagons: Entities That Propagate the [PSI+] Prion in Yeast
494
Analysis of the generators of epileptic activity in early-onset childhood benign occipital lobe epilepsy
495
Analysis of the genes for oestrogen and epidermal growth factor receptors in human breast cancer
496
Analysis of the genetic diversity 12 Iranian Damask rose (Rosa damascena Mill.) genotypes using amplified fragment length polymorphism markers
497
ANALYSIS OF THE GENETIC DIVERSITY AND POPULATION STRUCTURE OF LATVIAN ASH (FRAXINUS EXCELSIOR L.) STANDS USING NUCLEAR AND CHLOROPLAST SSR MARKERS
498
Analysis of the Genetic Diversity in Citrus (Citrus spp.) Species Using SSR Markers
499
Analysis of the genetic diversity of Bemisia tabaci populations in Shanxi province, China
500
Analysis of the genetic structure of red-legged partridge (Alectoris rufa, Galliformes) populations by means of mitochondrial DNA and RAPD markers: a study from central Italy Original Research Article
501
Analysis of the genetic structure of the Persian sturgeon (Acipenser persicus) populations: Comparison of control region sequencing and PCR-RFLP analysis of mitochondrial DNA
502
Analysis of the genetic variability in a sample of the remaining group of Spixʹs Macaw (Cyanopsitta spixii, Psittaciformes: Aves) by DNA fingerprinting Original Research Article
503
Analysis of the geochemical variability in lepisosteid scales from the Fontllonga-3 site (early Danian, Tremp Formation, South Central Pyrenees, Spain): Implications for palaeoenvironmental studies
504
Analysis of the geometric and radiative characteristics of hydrocarbon pool fires
505
Analysis of the Geometry of the Distal Femur and Proximal Tibia in the Osteoarthritic Knee: A 3D Reconstruction CT Scan Based Study of 449 Cases
506
Analysis of the Geometry of the Distal Femur and Proximal Tibia in the Osteoarthritic Knee: A 3D Reconstruction CT Scan Based Study of 449 Cases
507
Analysis of the Gerber–Shiu function and dividend barrier problems for a risk process with two classes of claims
508
Analysis of the gliding pattern of the canine flexor digitorum profundus tendon through the A2 pulley
509
Analysis of the global bending modes of a floating structure using the proper orthogonal decomposition
510
Analysis of the global warming dynamics from temperature time series
511
Analysis of the global warming dynamics from temperature time series
512
Analysis of the global warming potential for wood waste recycling systems
513
Analysis of the Gly40Ser Polymorphism in the Glucagon Receptor Gene in a German Non-Insulin-Dependent Diabetes Mellitus Population
514
Analysis of the gold recovery profile through a cyanidation plant
515
Analysis of the grain depth-of-cut in plunge grinding
516
Analysis of the green roof thermal properties and investigation of its energy performance
517
Analysis of the green roofs cooling potential in buildings
518
Analysis of the grinding of toner sheets using Vickers hardness as an index of grindability
519
Analysis of the growth of histamine-producing bacteria and histamine accumulation in fish during storage at low temperatures
520
Analysis of the growth of individual grains during recrystallization in pure nickel Original Research Article
521
Analysis of the growth of strike-slip faults using effective medium theory
522
Analysis of the H+ ring velocity distribution function near the Martian and Venusian bow shocks by an analytical model
523
Analysis of the hadronic light-by-light contributions to the muon g − 2 Original Research Article
524
Analysis of the haemagglutinin gene of current wild-type canine distemper virus isolates from Germany
525
ANALYSIS OF THE HAIR TEXTURE OF THE BOSNIAN BROKEN-HAIRED HOUND – BARAK
526
Analysis of the Hardening and Resilience Ability in Location-Allocation Problems
527
Analysis of the HASI accelerometers data measured during the impact phase of the Huygens probe on the surface of Titan by means of a simulation with a finite-element model
528
Analysis of the HDS of 4,6-DMDBT in the presence of naphthalene and carbazole over NiMo/Al2O3–SiO2(x) catalysts
529
Analysis of the health risk of exposure to breast milk mercury in infants in Taiwan
530
Analysis of the health variables of Khorasan Razavi province based on a geographical
531
Analysis of the healthcare waste management status in Tehran hospitals
532
Analysis of the heat and mass transfer during coffee batch roasting Original Research Article
533
Analysis of the heat and mass transfer processes in solar stills – The validation of a model
534
Analysis of the heat flux distribution at the anode of a TIG welding arc
535
Analysis of the heat transfer and friction factor correlations influence in the prediction of evaporating flows inside tubes
536
Analysis of the Heat Transfer in a Packed Bed with Cocurrent Gas-Liquid Upflow
537
Analysis of the heat transfer in the entrance region of optimised corrugated wall channel
538
Analysis of the heat transfer mechanisms during energy storage in a Phase Change Material filled vertical finned cylindrical unit for free cooling application
539
Analysis of the heat transfer of an impinging laminar flame jet
540
Analysis of the heat-adaptive response of psychrotrophic Bacillus weihenstephanensis
541
Analysis of the heavy oil distillation cuts corrosion by electrospray ionization FT-ICR mass spectrometry, electrochemical impedance spectroscopy, and scanning electron microscopy
542
Analysis of the helical twisted-wire pair running above ground: transfer function evaluation
543
Analysis of the HELIOS-3 μ+μ− data within a relativistic transport approach
544
Analysis of the hemispheric asymmetry using fractal dimension of a skeletonized cerebral surface
545
Analysis of the herbicides paraquat, diquat and difenzoquat in drinking water by micellar electrokinetic chromatography using sweeping and cation selective exhaustive injection
546
Analysis of the Hessian for aerodynamic optimization: inviscid flow
547
Analysis of the hierarchical LMS algorithm
548
Analysis of the high speed sliding interaction between titanium alloy and tantalum
549
Analysis of the high-fructose syrup production using reactive SMB technology
550
Analysis of the high-temperature methanol oxidation behaviour at carbon-supported Pt–Ru catalysts
551
Analysis of the Hilbert curve for representing two-dimensional space
552
Analysis of the Hirsch index’s operational properties
553
Analysis of the History Learning Model Based on the Great Mosque Nur Sulaiman Banyumas in SMA Negeri Baturraden
554
Analysis of the Hopf bifurcation for the family of angiogenesis models
555
Analysis of the horizontal flow in the advanced gas-cooled reactor
556
Analysis of the Human Alu Ya-lineage
557
Analysis of the human and ape foot during bipedal standing with implications for the evolution of the foot
558
Analysis of the human CGB/LHB gene cluster in breast tumors by real-time quantitative RT-PCR assays
559
Analysis of the Human Endogenous Coregulator Complexome
560
Analysis of the human folate receptor (beta) gene for an association with neural tube defects
561
Analysis of the Human Replication Protein A:Rad52 Complex: Evidence for Crosstalk Between RPA32, RPA70, Rad52 and DNA
562
Analysis of the human TPMT gene promoter
563
Analysis of the humoral immune response against total and recombinant antigens of Leishmania infantum: correlation with disease progression in canine experimental leishmaniasis
564
Analysis of the humoral immune response against total and recombinant antigens of Leishmania infantum: correlation with disease progression in canine experimental leishmaniasis
565
Analysis of the Hungaria asteroid population
566
Analysis of the Hurûfât or ‘Askerî Rûznâmçe Registers Without the Appointment Records of Waqfs: The Case of the District of Jerusalem
567
Analysis of the hybrid copper oxide–copper sulfate cycle for the thermochemical splitting of water for hydrogen production
568
Analysis of the hybrid finite element/finite volume methods for linear hyperbolic and convection-dominated convection–diffusion problems
569
Analysis of the hydration of a bentonite seal in a deep radioactive waste repository
570
Analysis of the hydrocyclone stock cleaning process for wasted fibre in a paper mill
571
Analysis of the Hydroformylation Reaction over an Immobilized Catalyst in Supercritical Carbon Dioxide
572
Analysis of the hydrogen electrode reaction mechanism in thin-layer cells. 1. Theory
573
Analysis of the hydrogen electrode reaction mechanism in thin-layer cells. 2. Study of hydrogen evolution on microelectrodes by scanning electrochemical microscopy
574
Analysis of the hydrological processes in a small headwater catchment in Benin (West Africa)
575
Analysis of the hydrolysis of inulin using real time 1H NMR spectroscopy Original Research Article
576
Analysis of the hydromechanical deep drawing of cylindrical cups
577
Analysis of the hydrophysical structure of the Sea of Azov in the period of the bottom anoxia development
578
Analysis of the hydrotreatment of Maya heavy crude with NiMo catalysts supported on TiO2-Al2O3 binary oxides Effect of the incorporation method of Ti
579
Analysis of the hydrotreatment of Maya heavy crude with NiMo catalysts supported on TiO2-Al2O3 binary oxides: Effect of the incorporation method of Ti
580
Analysis of the hygrothermal functional properties of stabilised rammed earth materials
581
Analysis of the hypoxia-activated dinitrobenzamide mustard phosphate pre-prodrug PR-104 and its alcohol metabolite PR-104A in plasma and tissues by liquid chromatography–mass spectrometry
582
Analysis of the hysteresis loop in stainless steels I. Austenitic and ferritic steels
583
Analysis of the hysteresis loop in stainless steels I. Austenitic and ferritic steels
584
Analysis of the hysteresis loop in stainless steels II. Austenitic–ferritic duplex steel and the effect of nitrogen
585
Analysis of the hysteresis loop in stainless steels II. Austenitic–ferritic duplex steel and the effect of nitrogen
586
Analysis of the hysteresis loops of a martensitic steel: Part I: Study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method
587
Analysis of the hysteresis loops of a martensitic steel: Part II: Study of the influence of creep and stress relaxation holding times on cyclic behaviour
588
Analysis of the ideal absorption cycle with external heat-transfer irreversibilities
589
Analysis of the IL-10, IL-12, and TNF-α Gene Polymorphisms in Patients With Vesicoureteral Reflux Among the Southeast Iranian Population
590
Analysis of the image force effects on the recombination at the donor–acceptor interface in organic bulk heterojunction solar cells
591
Analysis of the Image of Russia and Belarus Formed in The union State Print Media (And Their Electronic Analogues)
592
Analysis of the imaging performance in indirect digital mammography detectors by linear systems and signal detection models
593
Analysis of the imaging performance in indirect digital mammography detectors by linear systems and signal detection models
594
Analysis of the immune response in sheep efferent lymph during Salmonella abortusovis infection
595
Analysis of the immunoexpression of Ki‑67 and Bcl‑2 in the pericoronal tissues of impacted teeth, dentigerous cysts and gingiva using software image analysis
596
Analysis of the immunological cross reactivities of 213 well characterized monoclonal antibodies with specificities against various leucocyte surface antigens of human and 11 animal species
597
Analysis of the immunological cross reactivities of 213 well characterized monoclonal antibodies with specificities against various leucocyte surface antigens of human and 11 animal species
598
Analysis of the immunoproteome of Mycoplasma mycoides subsp. mycoides small colony type reveals immunogenic homologues to other known virulence traits in related Mycoplasma species
599
Analysis of the immunoproteome of Mycoplasma mycoides subsp. mycoides small colony type reveals immunogenic homologues to other known virulence traits in related Mycoplasma species
600
Analysis of the impact degree distribution in metabolic networks using branching process approximation
601
Analysis of the impact of a sharp indenter
602
Analysis of the Impact of Alfalfa Forage Production under Summer Water-Limiting Circumstances on Productivity, Agricultural and Growers Returns and Plant Stand
603
Analysis of the impact of alloy microstructural properties on passive films formed on low-C 13CrNiMo martensitic stainless steels
604
Analysis of the Impact of Alternative Method of Financing the Government Budget Deficit through Issuing Treasury Bills on Economic Variables: DSGE Approach
605
Analysis of the Impact of Conspiracy Illusion in Iran's Political Underdevelopment (Second Pahlavi Era)
606
Analysis of the impact of dynamic events on future power requirements
607
Analysis of the Impact of Economic Growth and Asymmetric Information of Capital Market on Investors' Confidence
608
Analysis of the Impact of Economic Sanctions on Health Research and Publication Activities of Scientists from Iran
609
Analysis of the impact of education rate on the rumor spreading mechanism
610
Analysis of the impact of electricity grid interconnection between Korea and Japan—Feasibility study for energy network in Northeast Asia
611
Analysis of the Impact of Environmental Unsustainability on Social Unsustainability in Iran: Tensions and Social Damages Caused by Drought in Rural Areas
612
Analysis of the impact of heat-to-power ratio for a SOFC-based mCHP system for residential application under different climate regions in Europe
613
Analysis of the impact of high-speed railroad service on air transport demand
614
Analysis of the impact of hybrid vehicles on energy systems in Japan
615
Analysis of the impact of injection mode in transport through strongly heterogeneous aquifers
616
Analysis of the Impact of Interest Rate Liberalization on Financial Services Management in Chinese Commercial Banks
617
Analysis of the Impact of Johnson's Behavioral Model on Anxiety of Mothers of Children with Cancer
618
Analysis of the impact of managed pressure drilling technology on current casing program design methods
619
Analysis of the impact of nano-zinc, nano-iron, and nano-manganese fertilizers on chickpea under rain-fed conditions
620
Analysis of the impact of price-sensitivity factors on the returns policy in coordinating supply chain
621
Analysis of the impact of rainfall assimilation during LBA atmospheric mesoscale missions in Southwest Amazon
622
Analysis of the impact of random summing on passive assay of pebble bed reactor fuel using gamma-ray spectrometry
623
Analysis of the impact of random summing on passive assay of pebble bed reactor fuel using gamma-ray spectrometry
624
Analysis of the impact of the forest fires in August 2007 on air quality of Athens using multi-sensor aerosol remote sensing data, meteorology and surface observations
625
Analysis of the Impact of user’s Violations on the Saturation Flow Rate at Signalized Intersections
626
Analysis of The Impact of Window Properties On the Main Living Space with The Aim of Daylight Efficiency and Energy Saving in The Hot and Dry Climate of Isfahan
627
Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process
628
Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process
629
Analysis of the Impacts of armed conflict on the Eastern Afromontane forest region on the South Sudan — Uganda border using multitemporal Landsat imagery
630
Analysis of the impacts of carbon taxes on energy systems in Japan
631
Analysis of the impacts of combining carbon taxation and emission trading on different industry sectors
632
Analysis of The Impacts of Family Ownership on a Company’s Costs of Debt
633
Analysis of the impacts of fuel sulfur on vehicle emissions in China
634
Analysis of the impacts of nuclear phase-out on energy systems in Japan
635
Analysis of the impacts of transferring a photovoltaic modules manufacturing facility
636
Analysis of the impedance spectra of Pt|poly(o-phenylenediamine) electrodes – hydrogen adsorption and the brush model of the polymer films
637
Analysis of the implementation of Results-based budgeting at municipal level (based on Vladimir Region)
638
Analysis of the implicit LU-SGS algorithm for 3rd- and 4th-order spectral volume scheme for solving the steady Navier–Stokes equations
639
Analysis of the Importance of the Metallo-β-Lactamase Active Site Loop in Substrate Binding and Catalysis Original Research Article
640
Analysis of the IMS Location Accuracy in Northern Eurasia and North America Using Regional and Global Pn Travel-time Tables
641
Analysis of the in situ Hydromechanical Behavior of a Fractured Calcareous Rock Mass
642
Analysis of the in vitro biocatalytic production of poly-(β)-hydroxybutyric acid
643
Analysis of the in vitro swelling behavior of poly(vinyl alcohol) hydrogels in osmotic pressure solution for soft tissue replacement
644
Analysis of the incommensurately modulated OS phase of SiO2 tridymite
645
Analysis of the indentation size effect in brittle materials from nanoindentation load–displacement curve
646
Analysis of the indentation size effect in the microhardness measurement of some cobalt-based alloys
647
Analysis of the Indicators, Components, and Dimensions of the Effectiveness Model of Executive Coaching in the Red Crescent Society of the Islamic Republic of Iran
648
Analysis of the Indices of the Patients with Pulmonary Tuberculosis and Positive Smear Test Within the Territory Covered by the West Tehran Health Center During 2004-2008
649
Analysis of the Individual Role of the TCRζ Chain in Transgenic Mice after Conditional Activation with Chemical Inducers of Dimerization
650
Analysis of the induction machine parameter identification
651
ANALYSIS OF THE INEXACT UZAWA ALGORITHMS FOR NONLINEAR SADDLE-POINT PROBLEMS
652
Analysis of the influence of a rivet yield stress distribution on the micro-SPR joint – initial approach
653
Analysis of the influence of adhesives in laser weld bonded joints
654
Analysis of the influence of back-pull in drawing process by the finite element method
655
Analysis of the Influence of Brand Experience and Customer Satisfaction on Brand Loyalty and Its Implications for Willingness to Pay a Price Premium (Study on Herbalife Product Nutrition Customer in East Lombok, West Nusa Tenggara, Indonesia)
656
Analysis of the influence of ceramic particles on the solidification process of metal matrix composites
657
Analysis of the influence of ceramic particles on the solidification process of metal matrix composites
658
Analysis of the influence of chemical composition on the mechanical and metallurgical properties of engine cylinder blocks in grey cast iron
659
Analysis of the Influence of Cold Front Quenching on the Turbulent Burning Velocity Associated with an Eddy-Break-Up Model
660
analysis of the influence of conflict and mutations on employee’s passion
661
Analysis of the influence of different heat transfer correlations for HTR helical coil tube bundle steam generators with the system code TRACE
662
Analysis of the influence of diode reverse recovery on the operation and design of high-frequency rectifiers
663
Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method
664
Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co
665
Analysis of the influence of elastomeric layer on helical spring stresses in longitudinal resonance vibration conditions
666
Analysis of the influence of germanium dead layer on detector calibration simulation for environmental radioactive samples using the Monte Carlo method
667
Analysis of the influence of germanium dead layer on detector calibration simulation for environmental radioactive samples using the Monte Carlo method
668
Analysis of the influence of gully erosion in the flow pattern of catchment streams, Southeastern Brazil
669
Analysis of the influence of image resolution on the discriminating power of trabecular bone architectural parameters
670
Analysis of the influence of interdetector volume on local calibration in size exclusion chromatography with dual multiangle-light-scattering/concentration detection
671
Analysis of the Influence of Mill Helix Angle on Chatter Stability
672
Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit
673
Analysis of the influence of operating conditions on fouling rates in fired heaters
674
Analysis of the influence of operational strategies in plant performance using SimulCET, simulation software for parabolic trough power plants q
675
Analysis of the influence of pH and pressure on the elimination of boron in reverse osmosis
676
Analysis of the influence of price and product performance, on the decision of heavy equipment customer buying excavator products ABC PT. XYZ
677
Analysis of the influence of register file size on energy consumption, code size, and execution time
678
Analysis of the influence of relative humidity on the moisture sorption of particles and the aerosolization process in a dry powder inhaler
679
Analysis of the influence of shielding gas mixtures on the gas metal arc welding metal transfer modes and fume formation rate
680
Analysis of the influence of the filtering medium on the behaviour of the filtering hydrocyclone
681
Analysis of the influence of the polymerisation degree on the thermal properties of irradiation-modified poly(tetrafluoroethylene)
682
Analysis of the influence of the power control and discontinuous transmission on RF exposure with GSM mobile phones
683
Analysis of the influence of the two types of the journal articles; theoretical and empirical on the impact factor of a journal
684
Analysis of the influence of the type of closure in the organoleptic characteristics of a red wine by using an electronic panel
685
Analysis of the influence of tool type, coatings, and machinability on the thermal fields in orthogonal machining of AISI 4140 steels
686
Analysis of the Influence of Type of Diabetes Mellitus on the Development and Type of Glaucoma
687
Analysis of the Influence of Type of Diabetes Mellitus on the Development and Type of Glaucoma
688
Analysis of the influence of urban form and materials on sensible heat flux — a case study of Japanʹs largest housing development “Tama New Town”
689
Analysis of the influences of gas temperature fluctuation on the soot formation and oxidation
690
Analysis of the influences of uncertainties in input variables on the outcomes of the Heliosat-2 method
691
Analysis of the Influencing Factors on the Well Performance in Shale Gas Reservoir
692
Analysis of the inhibition of food spoilage yeasts by vanillin
693
Analysis of the inhibition of mammalian carboxylesterases by novel fluorobenzoins and fluorobenzils Original Research Article
694
Analysis of the inhibition of mammalian thioredoxin, thioredoxin reductase, and glutaredoxin by cis-diamminedichloroplatinum (II) and its major metabolite, the glutathione-platinum complex
695
Analysis of the Inscriptions as Advertising Media in Persian Architecture
696
Analysis of the institutional volume-outcome relations for balloon angioplasty and stenting in the stent era in California
697
Analysis of the insulation capability of polyester insulator
698
Analysis of the Integration of Medical and Sports-oriented Approaches in Physical Education
699
Analysis of the intensity and phase delay of photoinduced infrared absorption from poly(2,5-thienylenevinylene)
700
Analysis of the interaction between cycloalkanes and 1-alkanols by means of Nitta Chao group contribution model
701
Analysis of the interaction between destination and departure time choices
702
Analysis of the interaction between edge and line finding techniques
703
Analysis of the interaction between hyaluronan and hyaluronan-binding proteins by capillary affinity electrophoresis: significance of hyaluronan molecular size on binding reaction
704
Analysis of the interaction between the pebble and the plasma flow in pebble divertor
705
Analysis of the interaction between turbulent combustion and thermal radiation using unsteady coupled LES/DOM simulations
706
Analysis of the interaction of a hybrid system consisting of bovine adrenodoxin reductase and flavodoxin from the cyanobacterium Anabaena PCC 7119
707
Analysis of the interaction of adjacent layers of a GFRP-laminate under fatigue loading
708
Analysis of the interaction of lipases with polypropylene of different structure and polypropylene-modified glass surface
709
Analysis of the interaction of vinyl and carbonyl silanes with carbon nanofiber surfaces Original Research Article
710
Analysis of the interaction products in U(Mo,X)/Al and U(Mo,X)/Al(Si) diffusion couples, with X = Cr, Ti, Zr
711
Analysis of the interaction using FTIR within the components of OREC composite GPE based on the synthesized copolymer matrix of P(MMA-MAh)
712
Analysis of the interaction within a rectangular array of rectangular inclusions using a new hybrid finite element method
713
Analysis of the interactions between difluoroacetylene and one or two hydrogen fluoride molecules based on calculated spin–spin coupling constants
714
Analysis of the interactions between He+ ions and transition metal surfaces using co-axial impact collision ion scattering spectroscopy
715
Analysis of the Interactions Between HIV-1 and the Cellular Prion Protein in a Human Cell Line
716
Analysis of the interactions between pentacene film and air molecules by means of Raman spectroscopy
717
Analysis of the interactions of biologically active poly(methacrylic-aminosalicylic acid) supports with Ca2+ and Zn2+ by ultrafiltration
718
Analysis of the interactions of human ribonuclease inhibitor with angiogenin and ribonuclease A by mutagenesis: importance of inhibitor residues inside versus outside the C-terminal “hot spot”
719
Analysis of the interactions of multicomponents in Cornus officinalis Sieb. et Zucc. with human serum albumin using on-line dialysis coupled with HPLC
720
Analysis of the interdiffusion of resin monomers into pre-polymerized fiber-reinforced composites
721
Analysis of the interface between lithium and organic electrolyte solution
722
Analysis of the Interface Crack for Rubber-like Materials
723
Analysis of the interference effect of arbitrary multiple parabolic cracks in plane elasticity by using a new boundary element method Original Research Article
724
Analysis of the intergenic region of tomato spotted wilt Tospovirus medium RNA segment
725
Analysis of the internal friction spectra during martensitic transformation by a new temperature rate method
726
Analysis of the internal friction spectra of high purity aluminium at medium temperatures
727
Analysis of the internal glass surfaces of vacuum glazing
728
Analysis of the internal structure and lattice (mis)orientation in individual grains of deformed CP nickel polycrystals by synchrotron X-ray micro-diffraction and microscopy
729
Analysis of the internal structure of a carbonate damage zone: Implications for the mechanisms of fault breccia formation and fluid flow
730
Analysis of the international distribution of per capita CO2 emissions using the polarization concept
731
Analysis of the Internet diffusion in the non-profit sector: the social digital divide in Italy
732
Analysis of the interpretation of yielding and strengthening behavior in small-size samples Original Research Article
733
Analysis of the Interrelations among Shift Work, Job Stress, Job Satisfaction and Health: a Petrochemical Complex Case Study
734
Analysis of the Interrelationship between IL-12, TNF-α, and IFN-γ/Production during Murine Listeriosis
735
Analysis of the intramolecular proximity effect on dichloroalkane + alkane mixtures using Nitta-Chao model
736
Analysis of the Invasive Strategy Decision in Patients With Acute Coronary Syndrome Without ST-Segment Elevation in a Real-World Setting
737
Analysis of the Involvement of an Inducible Arabidopsis RNA-Dependent RNA Polymerase in Antiviral Defense
738
Analysis of the iodine gas phase produced by interaction of CsI and MoO3 vapours in flowing steam
739
Analysis of the ionic conductivity in lithium salt-containing ionic liquids based on the bond strength–coordination number fluctuation model
740
Analysis of the Iranian Airport Network by a Complex Network Approach
741
Analysis of the iron state in iron containing vitamins and dietary supplements by Mossbauer spectroscopy
742
Analysis of the iron state in iron containing vitamins and dietary supplements by Mössbauer spectroscopy Original Research Article
743
Analysis of the ironing of a BJ-type constant velocity joint outer race with the upper bound element method
744
Analysis of the Isolated SecA DEAD Motor Suggests a Mechanism for Chemical–Mechanical Coupling
745
Analysis of the isolation of a target component using multicomponent isocratic preparative elution chromatography
746
Analysis of the isomerism effect on the mutual solubilities of bis(trifluoromethylsulfonyl)imide-based ionic liquids with water
747
Analysis of the isothermal crystallization of CaSiO3 in a CaO–Al2O3–SiO2 melt through in situ observations
748
Analysis of the Italian Dutch Elm Disease Fungal Population
749
Analysis of the Italian population of Ceratocystis fimbriata f.sp. platani using RAPD and minisatellite markers
750
Analysis of the ITER cryoplant operational modes
751
Analysis of the ITER ECH Upper Port Launcher remote maintenance using virtual reality
752
Analysis of the ITER low field side reflectometer employing the Beam Tracing Method
753
Analysis of the iterative penalty method for the Stokes equations Original Research Article
754
Analysis of the Job Preferences for Undergraduate Supply Chain Students
755
analysis of the juridical rights of dependents based on skmht in home ownership financing of pt bank ntb syariah mataram branch
756
Analysis of the K+ current in human CD4+ T lymphocytes in hypercholesterolemic state
757
Analysis of the Kalman filter based estimation algorithm: an orthogonal decomposition approach
758
Analysis of the KANT experiment on beryllium using TRIPOLI-4 Monte Carlo code
759
Analysis of the Karlsruhe Neutron Transmission experiment using MCNP with various beryllium nuclear data
760
Analysis of the karst aquifer structure of the Lamalou area (He´rault, France) with ground penetrating radar
761
Analysis of the Ketosynthase-Chain Length Factor Heterodimer from the Fredericamycin Polyketide Synthase Original Research Article
762
Analysis of the key active subsites of glycoside hydrolase 13 family members Original Research Article
763
Analysis of the Key Factors Affecting the Future of Medical Education Discipline in 2025 Based on STEPV Model: A Qualitative Study
764
Analysis of the Kinetic and Equilibrium Binding of Ku Protein to DNA
765
Analysis of the kinetics of N2O–CO reaction on Pd(1 1 0)
766
Analysis of the kinetics of phase transformations; roles of nucleation index and temperature dependent site saturation, and recipes for the extraction of kinetic parameters
767
Analysis of the kinetics of regeneration of bidispersed activated granular carbon, by supercritical carbon dioxide
768
Analysis of the Kirkendall effect, marker migration and pore formation Original Research Article
769
Analysis of the Kohn Laplacian on quadratic CR manifolds
770
Analysis of the L pΛp final-state interaction in the reaction p + p® K+ (L p)p+p→K+(Λp)
771
Analysis of the Lack of Compactness in the Critical Sobolev Embeddings
772
Analysis of the lag phase to exponential growth transition by incorporating inoculum characteristics Original Research Article
773
Analysis of the laminar flamelet concept for nonpremixed laminar flames
774
Analysis of the Language Used in the Reports of Peer-Review Journals
775
Analysis of the large (L) protein gene of the procine rubulavirus LPMV: identification of possible functional domains
776
Analysis of the l-arginine/NO pathway
777
Analysis of the laser patterning inside light guide panel
778
Analysis of the laser-induced discoloration of lead white pigment
779
Analysis of the laser-induced reduction mechanisms of medieval pigments
780
Analysis of the lateral dynamic response of high pier viaducts under high-speed train travel
781
Analysis of the leaching and toxicity of new amine activators for the curing of acrylic bone cements and composites
782
Analysis of the leakage path in an air-lubricated seal
783
Analysis of the learning curve in telerobotic, beating heart coronary artery bypass grafting: a 90 patient experience
784
Analysis of the Left Atrial Appendage by Three-Dimensional Transesophageal Echocardiography
785
ANALYSIS OF THE LEFT-HANDED METAMATERIALS USING MULTI-DOMAIN PSEUDOSPECTRAL TIME-DOMAIN ALGORITHM
786
Analysis of the Legal Aspects of Abortion-Therapy In the Light of Comparative Studies
787
Analysis of the legislated metals in different categories of olive and olive-pomace oils
788
Analysis of the level of comprehension of chemical hazard labels: A case for Zambia
789
Analysis of the Level of Environmental Development in the Rural Areas of Sistan with an Emphasis on Quranic Indices
790
Analysis of the Level of Physical Activity of University Faculty Members during the Coronavirus Pandemic
791
analysis of the level of resilience of post disaster earthquake state high school students in pidie jaya district
792
Analysis of the levelling process based upon an analytic forming model
793
Analysis of the life-cycle costs and environmental impacts of cooking fuels used in Ghana
794
Analysis of the limiting plastic state of a thick-walled bent pipe
795
Analysis of the limiting spectral distribution of large dimensional information-plus-noise type matrices
796
Analysis of the Limiting Spectral Distribution of Large Dimensional Random Matrices
797
Analysis of The limits of the Authority of Supreme Leader with Emphasis on the Verses and Opinions of the Jurists
798
Analysis of the limits of the CT2-profile method for sensible heat flux measurements in unstable conditions
799
Analysis of the linear and non-linear optics of crystals of CHI3, S8 and their 1:3 complex Original Research Article
800
Analysis of the linear SIC for DS/CDMA signals with random spreading
801
Analysis of the linkage between rain and flood regime and its application to regional flood frequency estimation
802
Analysis of the linkage positions in polydextrose by the reductive cleavage method
803
Analysis of the Liquid Architecture Ideology Based on Marcos Novak’s Theories
804
Analysis of the liquid argon purity in the ICARUS T600 TPC
805
Analysis of the liquid argon purity in the ICARUS T600 TPC
806
Analysis of the liquid fraction after esterification of sawdust with octanoyl chloride — Production of esterified hemicelluloses
807
Analysis of the Lived Experience of Teachers Violence towards Afghan Students in Primary Schools
808
Analysis of the Local Characteristics of Informal Settlements and how to Deal With these Settlements in the Neighborhood of Mashhad Abkuh
809
Analysis of the local truncation error in the pressure-free projection method for incompressible flows: a new accurate expression of the intermediate boundary conditions
810
Analysis of the logistic function model: derivation and applications specific to batch cultured microorganisms
811
Analysis of the longitudinal, “sloping plateau” effect of a planar sample in a single TE102 rectangular electron paramagnetic resonance cavity Original Research Article
812
Analysis of the long-term behavior of solute transport with nonlinear equilibrium sorption using breakthrough curves and temporal moments
813
Analysis of the Look-Locker T1 mapping sequence in dynamic contrast uptake studies: simulation and in vivo validation
814
Analysis of the low frequency damping observed at medium and high temperatures
815
Analysis of the low frequency damping observed at medium and high temperatures
816
Analysis of the low molecular weight serum peptidome using ultrafiltration and a hybrid ion trap-Fourier transform mass spectrometer
817
Analysis of the low temperature-dependent behaviour of a ductile adhesive under monotonic tensile/compression–shear loads
818
Analysis of the low-energy (nu)NN-dynamics within a three-body formalism
819
Analysis of the low-energy image differential cross sections of the CHAOS Collaboration
820
Analysis of the lubrication by a pseudoplastic fluid: Application to wire drawing
821
Analysis of the luminescent spectra of Eu3+ in glasses
822
Analysis of the M/D/1-type queue based on an integer-valued first-order autoregressive process
823
Analysis of the M/G/1 processor-sharing queue with bulk arrivals
824
Analysis of the M/G/1 queue with discriminatory random order service policy
825
Analysis of the magnet support structure for the plasma fusion experiment Wendelstein 7-X
826
Analysis of the magnetic corrosion product deposits on a boiling water reactor cladding
827
Analysis of the magnetic distribution within a high-temperature superconductor magnetic shielding cylinder by use of the finite element method Original Research Article
828
Analysis of the Magnetic Field Perturbations During the Assembly of Wendelstein 7-X
829
Analysis of the magnetic force effect on paramagnetic species
830
Analysis of the magnetic properties experiment data on Mars: results from Mars Pathfinder
831
Analysis of the magnetic property of a permanent-magnet-type MRI-behavior of residual magnetization
832
Analysis of the Mahuika comet impact tsunami hypothesis
833
Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O
834
Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds with nitrogen donor axial ligands
835
Analysis of the main types of damage on a pair of industrial dies for hot forging car steering mechanisms
836
Analysis of the major drivers of the ecological footprint using the STIRPAT model and the PLS method—A case study in Henan Province, China
837
Analysis of the mandibular movement by simultaneous multisection continuous ultrafast MRI
838
Analysis of the manufacturing lead time in a production system with non-renewal batch input, threshold policy and post-operation
839
Analysis of the manufacturing process of beverage cans using aluminum alloy
840
Analysis of the marine traffic safety in the Gulf of Finland
841
Analysis of the marine traffic safety in the Gulf of Finland
842
Analysis of the market for access to broadband telecommunications in the year 2000
843
Analysis of the market for diesel PEM fuel cell auxiliary power units onboard long-haul trucks and of its implications for the large-scale adoption of PEM FCs
844
Analysis of the market penetration of clean coal technologies and its impacts in Chinaʹs electricity sector
845
Analysis of the martensitic transformation at various scales in TRIP steel
846
Analysis of the martensitic transformation at various scales in TRIP steel
847
Analysis of the Martian atmosphere for riometry
848
ANALYSIS OF THE MASS TRANSFER CHARACTERISTICS OF A CHEMICAL ADDITION SYSTEM
849
Analysis of the mass transfer controlled regime in automotive catalytic converters
850
Analysis of the mass transfer entry region for drag-reducing viscoelastic fluids in turbulent pipe flow
851
Analysis of the mass transfers in an artificial kidney microchip
852
Analysis of the master curve approach on the fracture toughness properties of SA508 Gr.4N Ni–Mo–Cr low alloy steels for reactor pressure vessels
853
Analysis of the master equation for the Dicke model in squeezed vacua
854
Analysis of the materials and exterior texture of agro-industrial buildings: a photo-analytical approach to landscape integration
855
Analysis of the maximum likelihood, total least squares and principal component approaches for frequency response function estimation
856
Analysis of the mean values and fluctuations in the chaotic maser model
857
Analysis of the measured signals in apertureless near-field optical microscopy
858
Analysis of the measured signals in apertureless near-field optical microscopy
859
Analysis of the measurement of the current sharing temperature in the ITER TF Model Coil
860
Analysis of the mechanical behavior and characterization of pultruded glass fiber–resin matrix composites
861
Analysis of the mechanical behavior of chondrocytes in unconfined compression tests for cyclic loading
862
Analysis of the mechanical behavior of woven fibrous material using virtual tests at the unit cell level
863
Analysis of the mechanical behaviour of bituminous mixtures at low temperatures
864
Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling
865
Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks
866
Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)
867
Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash
868
Analysis of the mechanical response of a woven polymeric fabric with locally induced damage
869
Analysis of the mechanics of carbamide induced destruction of concrete and ceramic bricks
870
Analysis of the mechanism for electrodeposition of the ZnSe phase on Cu substrate
871
Analysis of the mechanism of retention on graphitic carbon by a computational chemical method
872
Analysis of the mechanism of the critical transition in irradiated acetylene that leads to generation of shell-shaped carbon nanoparticles Original Research Article
873
Analysis of the mechanism of the low-temperature oxidation of coal
874
Analysis of the medical and biological pain research literature in the European Union: A 2006 snapshot
875
Analysis of the MEN1 gene in sporadic pituitary adenomas from Japanese patients
876
Analysis of the mesoscale circulation in the occidental Mediterranean Sea during winter 1999–2000 given by a regional circulation model
877
Analysis of the mesoscale structure in the IMECOCAL region (off Baja California) from hydrographic, ADCP and altimetry data
878
Analysis of the metabolites of the sodium salt of 6-hydroxy-5-(phenylazo)-2-naphthalenesulfonic acid in Sprague–Dawley rat urine
879
Analysis of the Meter of Acoustic Musical Signals
880
Analysis of the methodology of the petrographic examination test (European Standard EN 12326-2) and the relation between petrography and modulus of rupture for Spanish roofing slates
881
Analysis of the Mexican lightning activity monitored by NASA satellites
882
Analysis of the microbial quality in drinking water distribution networks using the logistic regression model in Dasht-e Azadegan county, an arid region in the southwest of Iran
883
Analysis of the microclimatic and human comfort conditions in an urban park in hot and arid regions
884
Analysis of the microflora in Tibetan kefir grains using denaturing gradient gel electrophoresis Original Research Article
885
Analysis of the microporosity shrinkage upon thermal post-treatment of H3PO4 activated carbons Original Research Article
886
Analysis of the microporous texture of a glassy carbon by adsorption measurements and Monte Carlo simulation. Evolution with chemical and physical activation Original Research Article
887
Analysis of the microstructure and phase constitution of the Fe3Al/18-8 diffusion interface after re-heating
888
Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steel
889
Analysis of the microstructure near the crack tip of ASME Gr.92 steel after creep crack growth
890
Analysis of the microstructure of Cr–Ni surface layers deposited on Fe3Al by TIG
891
Analysis of the migration of nonsorbing tracers in a natural fracture in granite using a variable aperture channel model
892
Analysis of the milli-forming of single-crystal and poly-crystal bar
893
Analysis of the Million Dollar Bridge for seismic retrofit
894
Analysis of the mineral composition of Italian saffron by ICP-MS and classification of geographical origin
895
Analysis of the minimal privacy disclosure for web services collaborations with role mechanisms
896
Analysis of the minimum creep rates of TiAl alloys
897
Analysis of the minimum creep rates of TiAl alloys
898
Analysis of the Misconceptions of 7th Grade Students on Polygons and Specific Quadrilaterals
899
Analysis of the MISR LAI/FPAR product for spatial and temporal coverage, accuracy and consistency
900
ANALYSIS OF THE MIXED COUPLING IN BILATERAL MICROWAVE CIRCUITS INCLUDING ANISOTROPY FOR MICs AND MMICs APPLICATIONS
901
Analysis of the mixed-mode end load split delamination test
902
Analysis of the mixing rules for the Stillinger–Weber potential: a case-study of Ge–Si interactions in the liquid phase
903
Analysis of the modal energy distribution of an excited vibrating panel coupled with a heavy fluid cavity by a dual modal formulation
904
Analysis of the modal hypothesis of Ca2+-dependent inactivation of L-type Ca2+ channels Original Research Article
905
Analysis of the model of sustainable development in the traditional bazar of Iran (Case study: The traditional Bazar of Qom)
906
Analysis of the Model of Sustainable Development Planning in Rural Economy of Iran (Case Study: Yazd Province)
907
Analysis of the model: Well-posedness and diffusion asymptotics
908
Analysis of the modeling of indicators affecting bank runs in the banking industry
909
Analysis of the modified MOS Wilson current mirror: a pedagogical exercise in signal flow graphs, Masonʹs gain rule, and driving-point impedance techniques
910
ANALYSIS OF THE MODIFIED TIKHONOV METHOD FOR SOLVING A LINEAR ILL-POSED PROBLEM WITH A SOLUTION CONTAINING CONTINUOUS and DISCONTINUOUS COMPONENTS
911
Analysis of the Modifying Effect of Styrene Butadiene Rubber Latex Copolymer on Strength and Permeability Properties of Structural Light Aggregate Concrete
912
Analysis of the modulus of polyamide-6 silicate nanocomposites using moisture controlled variation of the matrix properties
913
Analysis of the molecular interactions of organic anhydride+alkane binary mixtures using the Nitta–Chao model
914
Analysis of the Molecular Mechanisms Governing the Stage-Specific Expression of a Prototypical Housekeeping Gene during Intraerythrocytic Development of P. falciparum
915
Analysis of the moments and parameters of a gamma DSD to infer precipitation properties: A convective stratiform discrimination algorithm
916
Analysis of the Money Road-Map Test performance in normal and brain-damaged subjects
917
Analysis of the monoamine oxidase genes and the Norrie disease gene locus in narcolepsy
918
Analysis of the monoclinic–tetragonal phase transition of zirconia under irradiation
919
Analysis of the monosaccharide composition of water-soluble polysaccharides from Sargassum fusiforme by high performance liquid chromatography/electrospray ionisation mass spectrometry
920
Analysis of the monotonicity conditions in the mimetic finite difference method for elliptic problems
921
Analysis of the Most Commonly Encountered Diagnoses in Academic Dermatopathology
922
Analysis of the Motivating Factors Perceived by the Farmers and Contract Dairy
923
Analysis of the MT-3 clad ballooning reflood test using the multi-rod coupled MATARE code Original Research Article
924
Analysis of the mucosal microenvironment: factors determining successful responses to mucosal vaccines
925
Analysis of the mucosal microenvironment: factors determining successful responses to mucosal vaccines
926
Analysis of the multidimensional behavior of granulation
927
Analysis of the multidimensional effects in biofilms
928
ANALYSIS OF THE MULTIPLE-SOLUTION RESPONSE OF A FLEXIBLE ROTOR SUPPORTED ON NON-LINEAR SQUEEZE FILM DAMPERS
929
Analysis of the multiplicative Lorenz system
930
Analysis of the multistrain asymmetric model for arbitrary strain diversity
931
Analysis of the mutations in exon 10 of MEFV gene in patients with premature coronary heart disease in west Azerbaijan province of Iran
932
Analysis of the n7Cn9 and 2n7Kn9 band complexes of dicyanoacetylene (NC–CC–CN)
933
Analysis of the nanocrystallization of Finemet type alloy by temperature-modulated differential scanning calorimetry
934
Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stress Original Research Article
935
Analysis of the nanoindentation load–displacement curves measured on high-purity fine-grained alumina
936
Analysis of the Narrative Bases of the Opponents of Revolution and Formation of Islamic Government in the Period of Occultation
937
Analysis of the near field image formation of dielectric gratings
938
Analysis of the near field image formation of dielectric gratings
939
Analysis of the near-infrared spectra of C60−
940
Analysis of the Needs of Relatives of Patients in Emergency Section of Zanjan Education-Medication Centers in 2019
941
Analysis of the neighborhood of a smooth caustic for true-amplitude one-way wave equations
942
Analysis of the neutral conductor current in a three-phase supplied network with nonlinear single-phase loads
943
Analysis of the neutron and proton contributions to the pygmy dipole mode in doubly magic nuclei
944
Analysis of the neutron component at high altitude mountains using active and passive measurement devices
945
Analysis of the neutron component at high altitude mountains using active and passive measurement devices
946
Analysis of the neutronic data in infinite medium using fusion neutron source for various material compositions
947
Analysis of the new architecture proposal for the CMM control system
948
Analysis of the new Crystal Ball data on image reaction with beam momenta of image
949
Analysis of the Nexus between Demographic Changes and Economic Growth in Pakistan: Role of Capital Stock
950
Analysis of the NF2 gene in oligodendrogliomas and ependymomas
951
Analysis of the NF-κB p50 dimer interface by diversity screening
952
Analysis of the NHMFL 45-T hybrid magnet thermal behavior Original Research Article
953
Analysis of the NiCo O spinel surface with Auger and X-ray 2 4 photoelectron spectroscopy
954
Analysis of the nitrifying bacterial community in BioCube sponge media using fluorescent in situ hybridization (FISH) and microelectrodes
955
Analysis of the nitrogen mustard mechlorethamine in topical pharmaceutical preparations by high-performance liquid chromatography
956
Analysis of the NMR through-space coupling mechanism between 19F atoms
957
Analysis of the No Return Point Hypothesis: The Effect of Audio and Visual Stimuli in the Fast Movements Inhibition
958
Analysis of the noble metal catalytic additives introduced by impregnation of as obtained SnO2 sol–gel nanocrystals for gas sensors
959
Analysis of the Noise Characteristics of CMOS Current Conveyors Erik Bruun
960
Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems
961
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow
962
Analysis of the nonlinear behavior of adhesives in bonded assemblies—Comparison of TAST and Arcan tests
963
Analysis of the nonlinear behavior of ascaris trypsin inhibitor from NMR data
964
Analysis of the nonlinear dynamic response of a rotor supported on ball bearings with floating-ring squeeze film dampers
965
Analysis of the nonlinear dynamic response of viscoelastic symmetric cross-ply laminated plates with transverse matrix crack
966
Analysis of the non-linear viscoelastic behaviour of silica filled styrene butadiene rubber
967
Analysis of the non-steady state vertical–horizontal rolling process in roughing trains by the three-dimensional finite element method
968
Analysis of the non-thermophilic Crenarchaeota phylogeny in the swamp soil of Zoige plateau wetland
969
Analysis of the non-volatile Maillard reaction products formed in an extrusion-cooked model food system
970
Analysis of the Nordel power grid disturbance of January 1, 1997 using trajectory sensitivities
971
Analysis of the NRAMP1 Gene Implicated in Iron Transport: Association with Multiple Sclerosis and Age Effects
972
Analysis of the nucleation of GaN layers on (0001) sapphire
973
Analysis of the nucleation of nanofluids in the ice formation process
974
Analysis of the nucleoprotein gene identifies distinct lineages of viral haemorrhagic septicaemia virus within the European marine environment
975
Analysis of the nucleotide sequence of 23.8 kbp from the left terminus of the genome of variola major virus strain India-1967
976
Analysis of the number of hydrogen bond groups of a multiwalled carbon nanotube probe tip for chemical force microscopy
977
Analysis of the numerical dispersion of waves in saturated poroelastic media Original Research Article
978
Analysis of the Numerical Results Obtained from the Experimental Examination of the Mechanical Properties of Geopolymer Concrete
979
Analysis of the Nuss Procedure for Pectus Excavatum in Different Age Groups
980
Analysis of the Nutritional Content of Myocastor coypus
981
Analysis of the nutritional status of algae by Fourier transform infrared chemical imaging
982
Analysis of the occurrence and clinical significance of thrombocytopenis with c7E3 (abciximab) in the EPIC trial
983
Analysis of the offset to a parabola Original Research Article
984
Analysis of the oil return in a pair of scroll compressors working in parallel at part load
985
Analysis of the Onsager Relations by Analytic Methods in Kinetic Gas Theory
986
Analysis of the onset of buoyancy-driven convection in a water layer formed by ice melting from below
987
Analysis of the Open and Closed Conformations of the GTP-binding Protein YsxC from Bacillus subtilis
988
Analysis of the Open and Closed Conformations of the β Subunits in Thermophilic F1-ATPase by Solution NMR
989
Analysis of the operating conditions influence on PEM fuel cell performances by means of a novel semi-empirical model
990
ANALYSIS OF THE OPERATING COSTS OF SOME HARVESTING SYSTEMS IN EGYPT
991
Analysis of the operation of a high-pressure micro-compressor
992
Analysis of the operational characteristics and limits of a loop heat pipe with porous element in the condenser
993
Analysis of the Operational Deficiencies Originating in Design at Wastewater Treatment Plants: A Case Study of the Islamic Republic of Iran
994
Analysis of the operational performance and efficiency characteristic for photovoltaic system in Hong Kong
995
Analysis of the opportunities and challenges for renewable energy market in the Western Balkan countries
996
Analysis of the opportunities and challenges of solar water heating system (SWHS) in India: Estimates from the energy audit surveys & review
997
Analysis of the optical and magnetooptical spectra of non-Kramers Pr3+(4f2) in Y3Al5O12 complemented by crystal-field modelling
998
Analysis of the optical properties for Ga4P3Ti compound with a metallic intermediate band
999
Analysis of the optical properties of the Orinoco River plume by absorption and fluorescence spectroscopy
1000
ANALYSIS OF THE OPTICAL TRANSMISSION THROUGH THE METAL PLATE WITH SLIT ARRAY
