بر اساس عنوان

1
Influence of bladed and glazed entrance on the performance of solar air heater
2
Influence of blade-to-blade dissimilarity on alleviation of helicopter blade-vortex interactions
3
Influence of blanching and slice thickness on drying characteristics of leek slices
4
Influence of blanching, freezing and frozen storage on physicochemical properties of broad beans (Vicia faba L)
5
Influence of Blanching-osmotk Dehydration Treatments on Volatile Fraction of Strawberries
6
Influence of blanket structural materials on liquid metal Pb–17Li flow in the FDS
7
Influence of blast pressure modeling on the dynamic response of conical and hemispherical shells
8
INFLUENCE OF BLEACH ACTIVATORS ON THE FABRIC MADE FROM COTTON (Gossypium hirsutum L.)
9
Influence of bleaching by ultrasound on fatty acids and minor compounds of olive oil. Qualitative and quantitative analysis of volatile compounds (by SPME coupled to GC/MS)
10
Influence of bleaching by ultrasound on fatty acids and minor compounds of olive oil. Qualitative and quantitative analysis of volatile compounds (by SPME coupled to GC/MS)
11
Influence of bleed water reabsorption on cement paste autogenous deformation
12
Influence of blended gypsum on the properties of Portland cement and Portland slag cement
13
Influence of blending methods on the co-gasification reactivity of petroleum coke and lignite
14
Influence of blending soybean, sunflower, colza, corn, cottonseed, and residual cooking oil methyl biodiesels on the oxidation stability
15
Influence of Blending Temperature on Fluorescence Properties of Silicone Rubber Matrix Eu(TTA)2(phen)(MA) Composites
16
Influence of blistering on deuterium retention in tungsten irradiated by high flux deuterium 10–100 eV plasmas
17
Influence of block composition on crack toughness behaviour of styrene-b–(styrene-random-butadiene)–b-styrene triblock copolymers
18
Influence of block composition on structural, thermal and mechanical properties of novel aliphatic polyester based triblock copolymers
19
Influence of block lengths and symmetries of block copolymers on phase behavior of polymer A/polymer B/block copolymer ternary blends
20
Influence of blocking effect of mountain and local front on two Asian-dust events observed at Mt. Haruna and Tsukuba in Kanto, Japan, in 2007
21
Influence of blood glucose level on the prognosis of patients with diabetes mellitus complicated with ischemic stroke
22
Influence of blood meal on the responsiveness of olfactory receptor neurons in antennal sensilla trichodea of the yellow fever mosquito, Aedes aegypti
23
Influence of Blood Pressure on the Effectiveness of a Fixed-Dose Combination of Isosorbide Dinitrate and Hydralazine in the African-American Heart Failure Trial Original Research Article
24
Influence of blood pressure profile on frailty phenotype in community-dwelling elders in Brazil – FIBRA study
25
Influence of blood volume (BV) changes on blood pressure and endothelin-1 (ET-1) concentration during hemodialysis (HD) treatment
26
Influence of blue light on Streptococcus mutans re-organization in biofilm
27
Influence of blue valence absorption band on nonlinear absorption in dysprosium bisphthalocyanine studied by open aperture z-scan
28
Influence of blunt needles on surgical glove perforation and safety for the surgeon
29
Influence of BN fiber coatings on the interfacial structure of sapphire fiber reinforced NiAl composites
30
INFLUENCE OF BOARD CHARACTERISTIC ON ENVIRONMENTAL MANAGEMENT CONCERN IN CONSTRUCTION INDUSTRY
31
Influence of body composition and weight-bearing physical activity in BMD of pre-pubertal children
32
Influence of body composition on bone mass in postmenopausal osteoporotic women
33
Influence of body composition on the technological properties and mineralogy of stoneware: A DOE and mineralogical–microstructural study
34
Influence of Body Condition on Milk Production and Metabolic Profile in Assaf Sheep
35
Influence of Body Condition Score on Yield and Composition of Milk Crossbred Dairy Cows
36
Influence of Body Height on Pulsatile Arterial Hemodynamic Dat
37
Influence of body length, life-history status and sex on trace metal concentrations in selected zooplankton collectives from the Greenland Sea
38
Influence of body mass index and polycystic ovarian syndrome on ICSI/IVF treatment outcomes: A study conducted in Pakistani women
39
Influence of body mass indexes on response to treatment in acute asthma.
40
Influence of body mass on glycemic control in a type 2 diabetic population: a 3-year follow-up
41
Influence of body mass on the hypothalamic-pituitary-adrenal-axis response to naloxone in patients with polycystic ovary syndrome
42
Influence of body segment parameters and modeling assumptions on the estimate of center of mass trajectory
43
Influence of body segments’ parameters estimation models on inverse dynamics solutions during gait
44
Influence of body size of soil fauna on litter decomposition and 15N uptake by poplar in a pot trial
45
Influence of body size of soil fauna on litter decomposition and 15N uptake by poplar in a pot trial
46
Influence of Body Size on Leadership in Shoals of Golden Shiners, Notemigonus Crysoleucas
47
Influence of body weight on response to subcutaneous vitamin K administration in over-anticoagulated patients
48
Influence of Body Weight on the Biochemical Indicators in Menopause
49
Influence of body weight, age and management system on reproduction of South African Angora goat does
50
Influence of bolt configuration and TiO2/ZnS fillers content on the strength of composites fasteners
51
Influence of bolt spacing and degree of anisotropy in single-lap joints
52
Influence of bond coat on shear adhesion strength of erosion and thermal resistant coating for carbon fiber reinforced thermosetting polyimide
53
Influence of bond coat thickness on the cyclic rumpling of thermally grown oxides Original Research Article
54
Influence of bondcoat pre-treatment and surface topology on the lifetime of EB-PVD TBCs
55
Influence of bonded-phase coverage in reversed-phase liquid chromatography via molecular simulation: I. Effects on chain conformation and interfacial properties
56
Influence of bonded-phase coverage in reversed-phase liquid chromatography via molecular simulation: II. Effects on solute retention
57
Influence of bonding environment on nano-mechanical properties of nitrogen containing hydrogenated amorphous carbon thin films
58
Influence of bonding variables on transient liquid phase bonding behavior of nickel based superalloy IN-738LC
59
Influence of bondline brittleness and defects on the strength of timber finger-joints
60
Influence of bondline brittleness and defects on the strength of timber finger-joints
61
Influence of Bone Composition and Apparent Density on Fracture Toughness of the Human Femur and Tibia
62
Influence of bone marrow graft lymphocyte subsets on outcome after HLA-identical sibling transplants
63
Influence of bone mineral density, age, and strain rate on the failure mode of human Achilles tendons
64
Influence of bone volume fraction and architecture on computed large-deformation failure mechanisms in human trabecular bone
65
Influence of bone-cut position in intraoral vertical ramus osteotomy on skeletal stability after mandibular setback
66
Influence of Bone-Lead Stores on the Observed Effectiveness of Lead Hazard Intervention
67
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis
68
Influence of borate complexation on the electrophoretic behavior of 2-AA derivatized saccharides in capillary electrophoresis
69
Influence of borate content on the radiative properties of Nd3+ ions in fluorophosphate glasses Original Research Article
70
Influence of boric acid on the electrodepositing process and structures of Ni–W alloy coating
71
Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys
72
Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys
73
Influence of boron addition on microstructure and mechanical properties of dental cast titanium alloys
74
Influence of boron addition on the grain refinement and mechanical properties of AZ91 Mg alloy
75
Influence of boron addition on the microstructure, structural and magnetic properties of Ni53.5Mn26.0Ga20.5 alloy
76
Influence of boron addition to Ti–13Zr–13Nb alloy on MG63 osteoblast cell viability and protein adsorption
77
Influence of boron and calcium on the tolerance to salinity of nitrogen-fixing pea plants
78
Influence of boron and oxygen on the microstructure and mechanical properties of high-strength Ti66Nb13Cu8Ni6.8Al6.2 alloys Original Research Article
79
Influence of boron carbide on properties of CVD-diamond thin films at various deposition pressures
80
Influence of boron concentration on growth characteristic and electro-catalytic performance of boron-doped diamond electrodes prepared by direct current plasma chemical vapor deposition
81
Influence of Boron Content in Iron Oxide on Performance of Mn-Zn Ferrites Original Research Article
82
Influence of boron ion implantation on the oxidation behavior of CVD-SiC coated carbon-carbon composites Original Research Article
83
Influence of boron ion implantation on the wear resistance of TiAlN coatings
84
Influence of boron on carbon arc plasma and formation of fullerenes and nanotubes
85
Influence of boron on strain hardening behaviour and ductility of low carbon hot rolled steel
86
Influence of boron on structure and oxidation behavior of graphite fiber, P120 Original Research Article
87
Influence of boron on the hydriding of nanocrystalline Mg2Ni
88
Influence of boron on the initial stages of Si molecular beam epitaxy on Si(1 1 1) studied by reflection high-energy electron diffraction
89
Influence of Boron on transformation behavior during continuous cooling of low alloyed steels
90
Influence of boron on void swelling in model austenitic steels
91
Influence of boronization on operation with high-Z plasma facing components in Alcator C-Mod
92
Influence of both cation and alginate nature on the rheological behavior of transition metal alginate gels
93
Influence of both concrete strength and transverse confinement on bending behavior of reinforced LWAC beams
94
Influence of both electric and magnetic fields on the polaron properties in a finite-potential quantum well wire
95
Influence of both milling conditions and lithium salt addition on the sinterability of Ba(Zn1/3Ta2/3)O3
96
Influence of Botrytis cinerea infection on Champagne wine proteins (characterized by two-dimensional electrophoresis/immunodetection) and wine foaming properties
97
Influence of bottle storage time on colour, phenolic composition and sensory properties of sweet red wines
98
Influence of Bottom Stress on the Two-layer Flow Induced by Gravity Currents in Estuaries
99
Influence of bottom topography on an upwelling current: Generation of long trapped filaments
100
Influence of botulinum toxin site of injections on healing rate in patients with chronic anal fissure
101
Influence of boundary conditions and geometric imperfections on lateral–torsional buckling resistance of a pultruded FRP I-beam by FEA
102
Influence of boundary conditions and size effect on the drift capacity of URM walls
103
Influence of boundary conditions on bi-phased polycrystal microstructure calculation
104
Influence of boundary conditions on CMAQ simulations over the Iberian Peninsula
105
Influence of boundary conditions on level statistics and eigenstates at the metal–insulator transition
106
Influence of boundary conditions on stress distributions in a single-lap adhesively bonded joint
107
Influence of boundary conditions on the ballistic performance of high-strength fabric targets
108
Influence of boundary conditions on the cooling effect of crushed-rock embankment in permafrost regions of Qinghai–Tibetan Plateau
109
Influence of boundary conditions on the dynamics of oscillatory media
110
Influence of boundary conditions on the free vibrations of rotating truncated circular multi-layered conical shells
111
Influence of boundary conditions on the one-way edge modes in two-dimensional magneto-optical photonic crystals
112
Influence of boundary conditions on the structure of laminar boundary layer with hydrogen combustion on a permeable surface
113
Influence of boundary conditions relaxation on panel flutter with compressive in-plane loads
114
Influence of boundary curvature on tangential stresses for the displacement discontinuity method
115
Influence of boundary on the effect of double-layer polarization and the electrophoretic behavior of soft biocolloids
116
Influence of boundary plantation of poplar (Populus deltoides M.) on soil–water use and water use efficiency of wheat
117
Influence of Boundary Scavenging and Sediment Focusing on234Th,228Th and210Pb Fluxes in the Santa Barbara Basin
118
Influence of boundary stress singularities on the vibration of clamped and simply-supported sectorial plates with arbitrary radial edge conditions
119
Influence of bounded geometry on the initial growth of electrocapillary instability for a liquid metal under electric field
120
Influence of bovine serum albumin on the antibacterial activity of endodontic irrigants against Enterococcus faecalis
121
Influence of Bradyrhizobium japonicum and phosphate solubilizing bacteria on soybean yield at different levels of nitrogen and phosphorus
122
Influence of Bragg gratings phase mismatch in a Mach-Zehnder-based add-drop multiplexer
123
Influence of branch content on the microstructure of blends of linear and octene-branched polyethylene: a MD simulation study
124
Influence of branching characteristics on thermal and mechanical properties of Ziegler-Natta and metallocene hexene linear low-density polyethylene blends with low-density polyethylene
125
Influence of Brand and Perceived Quality on Customer Behavior in the Covid- 19 Pandemic: Ethical Marketing Mix
126
Influence of Brand Loyalty on Consumer Sportswear
127
Influence of brazing parameters and alloy composition on interface morphology of brazed diamond
128
Influence of breakfast composition on childrenʹs attention and memory
129
Influence of breakfast on cognitive performance, appetite and mood in healthy young adults
130
Influence of breast cancer margin assessment method on the rates of positive margins and residual carcinoma
131
Influence of breathing pattern and lung inflation on impulse oscillometry measurements in horses
132
Influence of breathing therapy on complaints, anxiety and breathing pattern in patients with hyperventilation syndrome and anxiety disorders
133
Influence of breed and ageing time on the sensory meat quality and consumer acceptability in intensively reared beef
134
Influence of breed, parity, and stage of lactation on lactational performance and relationship between body fatness and live weight
135
Influence of Bretschneiderʹs Cardioplegia on Norepinephrine Release from Isolated Perfused Guinea-pig Hearts
136
Influence of brick air scrubber by-product on growth and development of corn and hybrid poplar
137
Influence of brick pattern interface structure on mechanical properties of continuous carbon fiber reinforced lithium aluminosilicate glass–ceramics matrix composites
138
Influence of brine composition and fines migration on crude oil/brine/rock interactions and oil recovery
139
Influence of brine concentration on Atlantic salmon fillet salting Original Research Article
140
Influence of brine concentration on swelling pressure of pork meat throughout salting
141
Influence of brine salting prior to pickle salting in the manufacturing of various salted-dried fish species Original Research Article
142
Influence of brisk walking on bone quality of healthy elderly women
143
Influence of brittle shear damage on accuracy of the two-step method in prediction of structural response to blast loads
144
Influence of broken ice on the propagation of surface waves over a bottom shelf
145
Influence of bromide ions on the synthesis of anomeric thiocyanates
146
Influence of bromide on electrochemistry of photosynthetic reaction center films on gold electrodes
147
Influence of bromoethyl group on biological activity of 5-fluorouracil prodrug: Insights from X-ray crystallography and molecular docking
148
Influence of broodstock age on sperm quality traits in Rutilus frisii and its effect on fertilization success
149
Influence of Brown Seaweed (Turbinaria murayana) in Optimizing Performance and Carcass Quality Characteristics in Broiler Chickens
150
Influence of Brugia malayi life stages and BmAFII fraction on experimental Leishmania donovani infection in hamsters
151
Influence of bubble plumes on evaporation from non-stratified waters
152
Influence of bubble size and flow velocity on AC electrical breakdown characteristics of LN2 Original Research Article
153
Influence of bubble size on the transition from low-Re bubbly flow to slug flow in a vertical pipe
154
Influence of bubbles on grain growth in ice
155
Influence of buffelgrass pasture conversion on the regeneration and reproduction of the columnar cactus, Pachycereus pecten-aboriginum, in northwestern Mexico
156
Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles
157
Influence of buffer composition on the distribution of inkjet printed protein molecules and the resulting spot morphology
158
Influence of buffer layer thickness and epilayer’s growth temperature on crystalline quality of InAs0.6P0.4/InP grown by LP-MOCVD
159
Influence of buffer layer thickness on the structure and optical properties of ZnO thin films
160
Influence of buffer layers on the structural properties of molecular beam epitaxy grown GaN layers
161
Influence of buffer layers on the structural properties of molecular beam epitaxy grown GaN layers
162
Influence of buffer on resonance frequency of thermoacoustic engine Original Research Article
163
Influence of buffer type and concentration on the peptide composition of trypsin hydrolysates of β-lactoglobulin
164
Influence of buffer zone concentrations on efficiency in partial filling micellar electrokinetic chromatography
165
Influence of buffering effects of dentifrices and fluoride gels on abrasion on eroded dentine
166
Influence of builderʹs sand on the TME of linseed for poultry
167
Influence of Building Façade Visual Elements on Its Historical Image: Case of Kuala Lumpur City, Malaysia
168
Influence of building insulation on outdoor concentrations of regional air-pollutants
169
Influence of building strategies on the accuracy of parts in selective laser sintering
170
Influence of bulk composition of the intermetallic compound ZnPd on surface composition and methanol steam reforming properties
171
Influence of bulk inversion asymmetry on the Datta–Das transistor
172
Influence of bulk pre-straining on the size effect in nickel compression pillars
173
Influence of bulking agent on sewage sludge composting process
174
Influence of bulking agents on organic matter evolution during sewage sludge composting; consequences on compost organic matter stability and N availability
175
Influence of bulky and halogen substituents on crystal packing of pyrazolo[1,5-a]pyrimidines
176
Influence of bull biostimulation, season and parity on resumption of ovarian activity of zebu (Bos indicus) cattle following parturition
177
Influence of bundle coating on the tensile behavior, bonding, cracking and fluid transport of fabric cement-based composites
178
Influence of buoyancy on heat transfer to water flowing in horizontal tubes under supercritical pressure
179
Influence of Burden Distribution on Temperature Distribution in COREX Melter Gasifier Original Research Article
180
Influence of Burner Head Design on Its Thermal and Environmental Characteristics
181
Influence of burner-port geometry in hydrocarbon oxidation and NOx formation mechanisms in methane/air flames
182
Influence of burnout process on pore structure and burnout microstructure in BaTiO3-based Y5V materials
183
Influence of burrow acoustics on sound reception by frogsEupsophus (Leptodactylidae)
184
Influence of butanol addition to diesel–biodiesel blend on engine performance and particulate emissions of a stationary diesel engine
185
Influence of butanol–diesel blends on particulate emissions of a non-road diesel engine
186
Influence of bypass grafting to the infarct artery on late potentials in coronary operations
187
Influence of C doping on the fracture mode and abrasive wear of Al2O3
188
Influence of C incorporation on the initial growth of epitaxial NiSi2 on Si(1 0 0)
189
Influence of C:N ratio on the start-up of up-flow anaerobic filter reactors
190
Influence of C3H8O3 in the electrolyte on characteristics and corrosion resistance of the microarc oxidation coatings formed on AZ91D magnesium alloy surface
191
Influence of C4A deficiency on nonresponse to HBsAg vaccination: a new immune response gene
192
Influence of C5-methylation of cytosine on the formation of cyclobutane pyrimidine dimers
193
Influence of Ca additives on the optical and dielectric studies of sol–gel derived PbTiO3 ceramics Original Research Article
194
Influence of Ca and K on the reconstruction of the Fe3O4(0 0 1) surface
195
Influence of Ca and Na ions in backwash water on ultrafiltration fouling control Original Research Article
196
Influence of Ca substitution on microstructure and electrical properties of Ba(Zr,Ti)O3 ceramics
197
Influence of Ca^2+, K^+ and NO3- fertilisation on nutritional quality of pepper
198
Influence of Ca2+ on cholesterol crystallization from supersaturated model biles
199
Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete
200
Influence of CaCl2 on the hydrothermal modification of Mg(OH)2
201
Influence of cadmium on antioxidant capacity and four microelement concentrations in tomato seedlings (Lycopersicon esculentum)
202
Influence of Cadmium on Life-History Characteristics of Folsomia candida (Willem) in an Artificial Soil Substrate
203
INFLUENCE OF CADMIUM ON PLANT GROWTH AND SOME NUTRIENTS CONTENT OF LETTUCE PLANT.
204
Influence of cadmium on the metabolic quotient, L - : D -glutamic acid respiration ratio and enzyme activity : microbial biomass ratio under laboratory conditions
205
Influence of Caecectomy on Digestibility of Amino Acids for Soybean, Canola and Sunflower Meals in Adult Cockerels
206
Influence of cage or pen housing on carcass traits and meat quality of rabbit
207
Influence of calcinated starfish powder on growth, yield, spawn run and primordial germination of king oyster mushroom (Pleurotus eryngii)
208
Influence of calcination ambient and film thickness on the optical and structural properties of sol–gel TiO2 thin films
209
Influence of calcination and pretreatment temperature on the activity of Ni–B/SiO2 amorphous catalyst in acrylonitrile hydrogenation Original Research Article
210
Influence of calcination conditions on carrying capacity of CaO-based sorbent in CO2 looping cycles
211
Influence of calcination conditions on phase formation and particle size of indium niobate powders synthesized by the solid-state reaction
212
Influence of calcination on the microstructures and photocatalytic activity of potassium oxalate-doped TiO2 powders Original Research Article
213
Influence of calcination parameters on the TiO2 photocatalytic properties
214
Influence of Calcination Temperature and Operational Parameters on Fe-ZSM-5 Catalyst performance in Sonocatalytic Degradation of Phenol from wastewater
215
Influence of calcination temperature and preparation method of TiO2–ZrO2 on conversion of cyclohexanone oxime to ε-caprolactam over B2O3/TiO2–ZrO2 catalyst Original Research Article
216
Influence of calcination temperature of IrO2/Ti electrodes on oxygen reduction
217
Influence of calcination temperature on Fe/HBEA catalyst for the selective catalytic reduction of NOx with NH3
218
Influence of calcination temperature on iron titanate catalyst for the selective catalytic reduction of NOx with NH3
219
Influence of calcination temperature on the activity of mesoporous CaO/TiO2–ZrO2 catalyst in the esterification reaction
220
Influence of calcination temperature on the piezoelectric properties of Ag2O doped 0.94(K0.5Na0.5)NbO3–0.06LiNbO3 ceramics
221
Influence of calcination temperature on the structure and catalytic performance of Au/iron oxide catalysts for water–gas shift reaction Original Research Article
222
Influence of calcination temperature on the structure and catalytic performance of CuOx-CoOy-CeO2 ternary mixed oxide for CO oxidation Original Research Article
223
Influence of calcination temperatures of Feitknecht compound precursor on the structure of Ni–Al2O3 catalyst and the corresponding catalytic activity in methane decomposition to hydrogen and carbon nanofibers Original Research Article
224
Influence of calcined kaolin on mortar properties
225
Influence of calcining temperature on photoluminescence and thermal quenching in europium-doped Y2SiO5 using the MOD process
226
Influence of calcining temperature on photoresponse of TiO2 film under nitrogen and oxygen in room temperature
227
Influence of calcining temperature on the mesopore structures and surface fractal dimensions of MgO-Al2O3-SiO2 xerogels
228
Influence of calcite on the microstructure and mechanical properties of pottery ceramics obtained from a kaolinite-rich clay from Burkina Faso
229
Influence of calcium (0.6 or 1.2%) and phosphorus (0.3 or 0.6%) content and ratio on the formation of urolithogenic compounds in the urine of Boer-cross goats fed high-concentrate diets
230
Influence of calcium and magnesium content of coconut oil on deposit and performance of plant oil pressure stoves
231
Influence of calcium carbonate on the decomposition of asbestos contained in end-of-life products
232
Influence of calcium channel blocker drugs in neuromuscular transmission
233
INFLUENCE OF CALCIUM CHLORIDE (CaCl2) ON FRUIT QUALITY OF PEAR (Pyrus communis) CV. LE CONTE DURING STORAGE
234
Influence of calcium chloride addition on the properties of emulsions stabilized by whey protein concentrate
235
Influence of calcium chloride on the thermal behavior of heavy and alkali metals in sewage sludge incineration
236
Influence of calcium content in Ni/CaO/γ-Al2O3 catalysts for CO2-reforming of methane
237
Influence of calcium hydroxide as an intracanal medicament on apical leakage following obturation using three different sealers
238
Influence of calcium hydroxide residues after using different irrigants on the accuracy of two electronic apex locators: An in vitro study
239
Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications
240
Influence of calcium nitrite inhibitor and crack width on corrosion of steel in high performance concrete subjected to a simulated marine environment
241
Influence of Calcium on Arachidonic Acid Mobilization by Murine Resident Peritoneal Macrophages
242
Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer
243
Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer
244
Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer
245
Influence of calcium on lipid mixing mediated by influenza hemagglutinin
246
Influence of Calcium on NADH and Succinate Oxidation by Rat Heart Submitochondrial Particles
247
Influence of calcium on pectin methylesterase behaviour in the presence of medium methylated pectins
248
Influence of calcium on tensile, optical and water vapour permeability properties of sodium caseinate edible films Original Research Article
249
Influence of calcium oxide level and time of exposure to sugarcane on in vitro and in situ digestive kinetics
250
Influence of Calcium Phosphate and Apatite Containing Products on Enamel Erosion
251
Influence of calcium phosphate crystal assemblies on the proliferation and osteogenic gene expression of rat bone marrow stromal cells
252
Influence of calcium propionate, water activity and storage time on mold incidence and aflatoxins production in broiler starter feed
253
Influence of Calcium Sources and Concentrations on the Quality and Storage Performance of Peach
254
Influence of calcium substitution on structural and electrical properties of substituted barium titanate
255
Influence of calcium, magnesium, sodium, potassium and pH on copper toxicity to barley (Hordeum vulgare)
256
Influence of calendering on the properties of paper-derived alumina ceramics
257
Influence of Camembert consumption on the composition and metabolism of intestinal microbiota: a study in human microbiota-associated rats
258
Influence of Camera’s Optical Axis Non-perpendicularity on Measurement Accuracy of Two-dimensional Digital Image Correlation
259
Influence of camped under associated with upright pastern in front conformation in the forelimb movement of horses
260
Influence of Campylobacter jejuni fliA, rpoN and flgK genes on colonization of the chicken gut
261
Influence of Candida pulcherrima Patagonian strain on alcoholic fermentation behaviour and wine aroma
262
Influence of candidates’ popularity, national sentiment and development in the by-election of P185 Batu Sapi, Sabah
263
Influence of canning process on colour, weight and grade of mushrooms
264
Influence of cannonball tree (Couroupita guianensis Aubl.) leaf extract and electrolyzed oxidizing water on postharvest quality of tomato
265
Influence of Cannulation Point on Infraclavicular Subclavian Vein Catheterization: A Clinical Trial
266
Influence of canola oil on the fatty acid profile in goats milk
267
Influence of canopy structure and direct beam solar irradiance on snowmelt rates in a mixed conifer forest
268
Influence of canopy structure on the understory environment in tall, old-growth, conifer forests
269
Influence of CaO additives on wheat-straw pyrolysis as determined by TG-FTIR analysis
270
Influence of CaO additives on wheat-straw pyrolysis as determined by TG-FTIR analysis
271
Influence of CaO–ZrO2–Al2O3–SiO2 glass-ceramic frits on the technological properties of porcelain stoneware bodies
272
Influence of capacitance effect on alternating-current organic light-emitting diodes
273
Influence of capacitive effects on the dynamic of a CNTFET by Monte Carlo method
274
Influence of capillary forces on water injection into hot rock, saturated with superheated vapour
275
Influence of capillary-pressure models on CO2 solubility trapping
276
Influence of capping conditions on structural properties of CdSe/ZnSe quantum dot structures
277
Influence of capping on strain, composition and shape of SiGe islands
278
Influence of captopril on nitroglycerin-mediated vasodilation and development of nitrate tolerance in arterial and venous circulation
279
Influence of carbamide peroxide on enamel fluoride uptake
280
Influence of carbide and inclusion contents on the fatigue properties of high speed steels and tool steels
281
Influence of carbide coatings on the oxidation behavior of carbon fibers Original Research Article
282
Influence of carbide substrates on tribological properties of chromium and chromium nitride coatings: application to wood machining
283
Influence of carbides and microstructure of CoCrMo alloys on their metallic dissolution resistance
284
Influence of carbohydrate delivery on the immune response during exercise and recovery from exercise
285
Influence of Carbohydrate on Structure, Stability, and Function of Gelatin-Binding Fragments of Fibronectin
286
Influence of carbon addition on neutron-induced void swelling of Fe–15Cr–16Ni–0.25Ti model alloy
287
Influence of carbon aerosol aggregation on its optical properties in the asymptotic model of fractal cluster
288
Influence of carbon amendments on soil denitrifier abundance in soil microcosms
289
Influence of carbon and aluminium additions on the Fe–10% B (wt.) system
290
Influence of carbon and buffer amendment on ammonia volatilization in composting
291
Influence of carbon and chromium content and preform shape on the microstructure of spray formed steel deposits
292
Influence of carbon and chromium content and preform shape on the microstructure of spray formed steel deposits
293
Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co–Cr–Mo alloy
294
Influence of carbon and oxygen on phosphorus and aluminium co-gettering in silicon solar cells
295
Influence of carbon and oxygen on phosphorus and aluminium co-gettering in silicon solar cells
296
Influence of carbon ash on the rheological properties of bentonite dispersions
297
Influence of carbon black amorphous phase content on rubber filled compounds
298
Influence of carbon black amorphous phase content on rubber filled compounds
299
Influence of carbon black and binder on Li-ion batteries
300
Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber composite Original Research Article
301
Influence of carbon black in engine oil on wear of H-free diamond-like carbon coatings
302
Influence of carbon black on slurry compositions for tape cast porous piezoelectric ceramics
303
Influence of carbon black surface chemistry on the adsorption of model herbicides from aqueous solution
304
Influence of carbon blacks on butadiene rubber/high styrene rubber/natural rubber with nanosilica: Morphology and wear
305
Influence of carbon concentration on chemical behavior of energetic deuterium implanted into carbon-contained boron film
306
Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions
307
Influence of carbon concentration on martensitic transformation in metastable austenitic steels under cyclic loading conditions
308
Influence of carbon concentration on structural, magnetic and electrical transport properties for antiperovskite compounds AlCxMn3
309
Influence of carbon content and particle dispersion on radiation properties of coal chars
310
Influence of carbon content on physicomechanical characteristics of boron carbide
311
Influence of Carbon Content on Strain Hardening Behaviour of Sintered Plain Carbon Steel Preforms Original Research Article
312
Influence of carbon content on the crystallographic structure of boron carbide films
313
Influence of Carbon Content on the Mechanical Properties of Ultra-high Strength of Coated Steel Wire
314
Influence of carbon content on the microstructure and tribological properties of TiN(C) coatings in water lubrication
315
Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe–Mn–C steels Original Research Article
316
Influence of carbon deposits and subsequent silylation of silica gel on sorption efficiency of explosive nitramines
317
INFLUENCE OF CARBON FIBER REINFORCED POLYMERS ON UPGRADING SHEAR BEHAVIOR OF RC COUPLING BEAMS
318
Influence of carbon fibre content on the processing and tribological properties of silicon nitride/carbon fibre composites
319
Influence of carbon material and sputtering angle on stripper foil lifetime
320
Influence of carbon material and sputtering angle on stripper foil lifetime
321
Influence of carbon monoxide in package atmospheres containing oxygen on colour, reducing activity, and oxygen consumption of five bovine muscles
322
Influence of carbon nanofiber properties as electrocatalyst support on the electrochemical performance for PEM fuel cells
323
Influence of carbon nanofibers on electrochemical properties of carbon nanofibers/glass fibers composites
324
Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites Original Research Article
325
Influence of carbon nanotube scaffolds on human cervical carcinoma HeLa cell viability and focal adhesion kinase expression Original Research Article
326
Influence of carbon nanotube suspension on the thermal performance of a miniature thermosyphon
327
Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites
328
Influence of carbon nanotube–polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene
329
Influence of carbon nanotubes addition on carbon–carbon supercapacitor performances in organic electrolyte
330
Influence of carbon nanotubes and polypyrrole on the thermal, mechanical and electroactive shape-memory properties of polyurethane nanocomposites
331
Influence of carbon nanotubes and silicon carbide whiskers on the mechanical loss due to grain boundary sliding in 3-mol% yttria-stabilized tetragonal zirconia polycrystals
332
Influence of carbon nanotubes on the optical properties of plasticized solid polymer electrolytes
333
Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates Original Research Article
334
Influence of carbon nanotubes structure on the mechanical behavior of cement composites
335
Influence of carbon on martensitic phase transformations in NiTi shape memory alloys Original Research Article
336
Influence of carbon on phase stability of tetragonal ZrO2
337
INFLUENCE OF CARBON ON THE AGEING BEHAVIOUR OF TI-13V- 11CR-3AL
338
Influence of carbon on the electron stimulated desorption from titanium silicide surfaces
339
Influence of carbon on the synthesis of AlN powder from combustion synthesis precursors
340
Influence of carbon precursors on thermal plasma assisted synthesis of SiC nanoparticles
341
Influence of carbon shell structure on electrochemical performance of multi-walled carbon nanotube electrodes Original Research Article
342
Influence of carbon source and inoculum type on anaerobic biomass adhesion on polyurethane foam in reactors fed with acid mine drainage
343
Influence of carbon source on the microstructure of Al–Ti–C master alloy and its grain refining efficiency
344
Influence of carbon sources and C/N ratio on EPS production in anaerobic sequencing batch biofilm reactors for wastewater treatment
345
Influence of carbon sources on electrochemical performances of LiFePO4/C composites
346
Influence of carbon sources on growth and GC-MS based metabolite profiling of Arnica montana L. hairy roots
347
Influence of carbon sources on LiFePO4/C composites synthesized by the high-temperature high-energy ball milling method
348
Influence of carbon sputtering power on structure, corrosion resistance, adhesion strength and wear resistance of platinum/ruthenium/nitrogen doped diamond-like carbon thin films
349
Influence of carbon structure of the anode on the production of graphite in single-walled carbon nanotube soot synthesized by arc discharge using a Fe–Ni–S catalyst Original Research Article
350
Influence of carbon structure of the anode on the synthesis of single-walled carbon nanotubes in a carbon arc plasma Original Research Article
351
Influence of carbon structure on performance of electrode material for electric double-layer capacitor Original Research Article
352
Influence of carbon templates and Yb3+ concentration on red and green luminescence of uniform Y2O3:Yb/Er hollow microspheres
353
Influence of carbon, nitrogen and oxygen impurities on the ductility and electronic properties of fcc iridium: First-principles study
354
Influence of carbonaceous additives on hydrogen sorption properties of Mg–RE–Ni “pseudoalloys”
355
Influence of carbonate content and micro fabrics on the failure strength of the sandy facies of the Opalinus Clay from Mont Terri (Underground Rock Laboratory)
356
Influence of carbonate content of marls used in dams: Geotechnical and statistical characterization
357
Influence of carbonate content on the stress–strength behaviour of neogene marls from the betic cordillera (Spain) in cu triaxial tests using a quasilinear elastic (hyperbolic) model
358
Influence of carbonate facies on fault zone architecture
359
Influence of carbonate intercalation in the surface-charging behavior of Zn–Cr layered double hydroxides
360
Influence of carbonate microfabrics on the failure strength of claystones
361
Influence of carbonates on the riverine carbon cycle in an anthropogenically dominated catchment basin: evidence from major elements and stable carbon isotopes in the Lagan River (N. Ireland)
362
Influence of carbonation and carbonation methods on leaching of metals from mortars
363
Influence of carbonation on chloride-induced reinforcement corrosion in simulated concrete pore solutions
364
Influence of carbonation on the load dependent deformation of hydraulic lime mortars
365
Influence of carbon-based nanomaterials on lux-bioreporter Escherichia coli
366
Influence of carbonisation parameters on the transport properties of carbon membranes by statistical analysis
367
Influence of carbonization of hot-pressed carbon nanotube electrodes on removal of NaCl from saltwater solution
368
Influence of carbon–oxygen surface complexes on the surface acidity of tungsten oxide catalysts supported on activated carbons Original Research Article
369
Influence of carbon-to-nitrogen ratio on the mixed-acid fermentation of wastewater sludge and pretreated bagasse
370
Influence of carbon–vacancy interaction on carbon and vacancy diffusivity in tungsten
371
Influence of carboxyl group density on neuron cell attachment and differentiation behavior: Gradient-guided neurite outgrowth
372
Influence of carboxyl group formation on ammonia adsorption of NiO-templated nanoporous carbon surfaces
373
Influence of carboxylate ions containing polymers on calcification: in vitro study
374
Influence of carboxymethyl cellulose and sodium alginate on sweetness intensity of Aspartame
375
Influence of Carburization on Dynamic Impact Behavior of NiTiCu Alloy
376
Influence of carburizing and nitriding on failure of gears – A case study
377
Influence of carcinogen binding by lactic acid-producing bacteria on tissue distribution and in vivo mutagenicity of dietary carcinogens
378
Influence of Cardiac Risk Factors and Medication on Length of Hospitalization in Patients Undergoing Major Vascular Surgery
379
Influence of cardiac tissue anisotropy on re-entrant activation in computational models of ventricular fibrillation
380
Influence of cardiopulmonary bypass perfusion temperature on neurologic and hematologic function after coronary artery bypass grafting
381
Influence of cardiopulmonary reflex on the sympathetic activity during myocardial infarction
382
Influence of Cardiovascular Risk Status on Coronary Flow Reserve in Healthy Young Men
383
Influence of Carisolv on resin adhesion for two different adhesive systems to sound human primary dentin and young permanent dentin
384
Influence of Carisolv™ for resin adhesion to sound human primary dentin and young permanent dentin
385
Influence of Carotenoids and Pulps on the Color Modification of Blood Orange Juice
386
Influence of carrageenan addition on turkey meat sausages properties Original Research Article
387
Influence of carrier and bactericide on sorption coefficients of hydrophobic organic compounds for two lake sediments
388
Influence of carrier and doping gases on the chemical vapor deposition of silicon quantum dots
389
Influence of carrier correlations on the excitonic optical response including disorder and microcavity effects
390
Influence of carrier filling ratio on the performance of moving bed biofilm reactor in treating coking wastewater
391
Influence of carrier gas on the prediction of gas chromatographic retention times based on thermodynamic parameters
392
Influence of carrier gas pressure and flow rate on atomic layer deposition of HfO2 and ZrO2 thin films
393
Influence of carrier particle size, carrier ratio and addition of fine ternary particles on the dry powder inhalation performance of insulin-loaded PLGA microcapsules
394
Influence of carrier solution ionic strength and injected sample load on retention and recovery of natural nanoparticles using Flow Field-Flow Fractionation
395
Influence of carrying a backpack on pelvic tilt, rotation, and obliquity in female college students
396
Influence of carvacrol on growth and toxin production by Bacillus cereus
397
Influence of carvacrol on survival of Botrytis cinerea inoculated in table grapes
398
Influence of carvedilol on hospitalizations in heart failure: incidence, resource utilization and costs
399
Influence of casein-based microencapsulation on freeze-drying and storage of probiotic cells Original Research Article
400
Influence of caspase3 selective inhibitor on proteolysis of chicken skeletal muscle proteins during post mortem aging
401
Influence of cassava starch and carnauba wax on physical properties of cashew tree gum-based films
402
Influence of cassava starch content and sintering temperature on the alumina consolidation technique
403
Influence of Cast Dimension on Rotary Bending High Cycle Fatigue Properties of Single Crystal Superalloy Original Research Article
404
Influence of caste polyethism on longevity of workers in social insect colonies
405
Influence of casting defects on fatigue properties of SiC particulate dispersed aluminum alloy composite castings
406
Influence of casting defects on the fatigue behavior of cast aluminum AS7G06-T6
407
Influence of casting defects on the fatigue limit of nodular cast iron
408
Influence of casting procedures on the corrosion resistance of clinical dental alloys containing palladium
409
Influence of casting surface on creep behaviour of thin-wall Ni-base superalloy Inconel100
410
Influence of casting surfaces on fatigue strength of ductile cast iron
411
Influence of Casting Temperature on Electrochemical Behavior of Al-Zn-In Sacrificial Anodes
412
Influence of catalyst and solvent on the preparation of silica particles with mesoporous shell
413
Influence of catalyst and temperature on gasification performance of pig compost for hydrogen-rich gas production
414
Influence of catalyst layer polybenzimidazole molecular weight on the polybenzimidazole-based proton exchange membrane fuel cell performance
415
Influence of catalyst morphology on the performance of electrolytic silver catalysts for the partial oxidation of methanol to formaldehyde Original Research Article
416
Influence of catalyst on transesterification between poly(lactic acid) and polycarbonate under flow field
417
Influence of catalyst pretreatment on catalytic properties and performances of Ru–Re/SiO2 in glycerol hydrogenolysis to propanediols
418
Influence of catalyst pretreatments on volatile organic compounds oxidation over gold/iron oxide
419
Influence of catalyst type on the curing process and network structure of alkyd coatings
420
Influence of catalyst types on the microwave-induced pyrolysis of sewage sludge
421
Influence of catalyst types on the microwave-induced pyrolysis of sewage sludge
422
Influence of catalysts on the pyrolysis of lignites
423
Influence of catalytic system composition on formation of adamantane containing ketones
424
Influence of cataract urgery on automated perimetry in patient with glaucoma
425
Influence of cataract urgery with implantation of different intraocular lene on canning laer tomography and polarimetry
426
Influence of catch crop on soil properties and yield of spring barley
427
Influence of Catchment Condition and water resource development on waterbird assemblages in the Murray-Darling Basin, Australia
428
Influence of catechin on precipitation of aluminum hydroxide
429
Influence of catheter design on lumen wall temperature distribution in intracoronary thermography
430
Influence of Catheter Type and Tenaculum Use on Intrauterine Insemination Outcome
431
Influence of cathode flow pulsation on performance of proton-exchange membrane fuel cell
432
Influence of cathode gas diffusion media on the performance of the PEMFCs
433
Influence of cathode opening size and wetting properties of diffusion layers on the performance of air-breathing PEMFCs
434
Influence of cathode oxygen transport on the discharging time of passive DMFC
435
Influence of cathode polarization on the chromium deposition near the cathode/electrolyte interface of SOFC
436
Influence of cathode process on the performance of lithium-air batteries
437
Influence of Cathodic Arc Current on ‎Structure, Mechanical and Tribological ‎Properties of TiC/a-C:H Nano-multilayer ‎Coatings
438
Influence of catholyte pH and temperature on hydrogen production from acetate using a two chamber concentric tubular microbial electrolysis cell
439
Influence of CaTiO3 impurity in SHS-TiN powder on the mechanical properties of ZrO2–TiN composites
440
Influence of cation and anion structure of the ionic liquid on extraction processes based on activity coefficients at infinite dilution. A review
441
Influence of cation chemical composition and structure on the double layer capacitance for Bi(1 1 1)|room temperature ionic liquid interface
442
Influence of cation disorder on the magnetic properties of ball-milled ilmenite (FeTiO3)
443
Influence of cation distribution on the optical absorption spectra of Fe3+-bearing spinel s.s. –hercynite crystals: evidence for electron transitions in VIFe2+–VIFe3+ clusters
444
Influence of cation exchange on electrokinetic and rheological properties of the oxidized graphite dispersions
445
Influence of cation on the pyrolysis and oxidation of alginates
446
Influence of cation on the pyrolysis and oxidation of alginates
447
Influence of cation size on ionic glass formation and ionic conductivity
448
Influence of cation substitution on the magnetic properties of the FeCr2S4 ferrimagnet Original Research Article
449
Influence of cation substitution on the phase formation kinetics of Sr0.7Bi2.3Ta2O9 thin films
450
Influence of cation type, ionic strength, and pH on solubilization and mobilization of residual hydrocarbon by a biosurfactant
451
Influence of cationic and anionic additives on the electrical properties of ionophore-based ion-selective membranes
452
Influence of cationic field strength of modifiers on the 1.53 μm spectroscopic properties of Er3+-doped tellurite glasses
453
Influence of cationic flocculant properties on the flocculation of yeast suspensions
454
Influence of cationic gemini and conventional CTAB on the interaction of [Cr(III)-Gly-Tyr]2+ complex with ninhydrin
455
Influence of Cationic ordering on ion transport in NASICONs: Molecular dynamics study
456
Influence of cationic polyelectrolyte coagulant on microfiltration performance for treatment of oxidation pond effluent Original Research Article
457
Influence of cationic vacancies on the ionic conductivity of oxyapatites
458
Influence of cations during Orange-II degradation on boron-doped diamond electrode
459
Influence of cations on active sites of the alkaline earth salts of 12-tungstophosphoric acid: microcalorimetric study
460
Influence of cations on noncovalent interactions between 6-propionyl-2-dimethylaminonaphthalene (PRODAN) and dissolved fulvic and humic acids
461
Influence of cation–π interactions in different folding types of membrane proteins Original Research Article
462
Influence of cation–π interactions in protein–DNA complexes
463
Influence of cattle breed and ageing time on textural meat quality
464
Influence of cattle breed and ageing time on textural meat quality
465
Influence of cattle breed on gene expression and phenotype of Holstein and Jersey embryos
466
Influence of cattle breed on gene expression and phenotype of Holstein and Jersey embryos
467
Influence of cattle grazing on population density and species richness of granivorous birds (Emberizidae) in the arid plain of the Monte, Argentina
468
Influence of cattle grazing on the density of oak seedlings and saplings in a Tabor oak forest in Israel
469
Influence of cattle manure and mycorrhiza fungi on fruit and grain yield of cucurbita pepo L. under water deficit stress
470
Influence Of Cattle Manure And Mycorrhiza Fungi On Vegetative Growth Of Pumpkin Under Water Deficit Conditions
471
Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period
472
Influence of cavitation on the hydroelastic stability of hydrofoils
473
Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions
474
Influence of cavity boundary conditions on the effective electroelastic moduli of piezoelectric ceramic with cavities
475
Influence of cavity de-tuning in semiconductor microcavity LEDs
476
Influence of cavity dimension and restoration methods on the cusp deflection of premolars in composite restoration
477
Influence of cavity dimension on the stability of eccentrically loaded slender unreinforced masonry hollow walls
478
Influence of cavity dimensions and their derivatives (volume and ‘C’ factor) on shrinkage stress development and microleakage of composite restorations
479
Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange
480
Influence of cavity pressure on hydrodynamic deep drawing of aluminum alloy rectangular box with wide flange
481
Influence of Cd(II), Cr(VI) and Fe(III) on early steps of deetiolation process in wheat: fluorescence spectral changes of protochlorophyllide and newly formed chlorophyllide
482
Influence of Cd2+ ions on electrical properties of stearic acid Langmuir–Blodgett films
483
Influence of Cd2+ ions on the structural, electrical, optical and magnetic properties of Co–Zn nanoferrites prepared by sol gel auto combustion method
484
Influence of CdCl2 treatment on structural and optical properties of vacuum evaporated CdTe thin films
485
Influence of CdO and gamma irradiation on the infrared absorption spectra of borosilicate glass
486
Influence of CdO-doping on the photoluminescence properties of ZnO nanofibers: Effective visible light photocatalyst for waste water treatment
487
Influence of CdS growth process on structural and photovoltaic properties of CdTe/CdS solar cells
488
Influence of CdS heat treatment on the microstructure of CdS and the performance of CdS/CdTe solar cells
489
Influence of CdS window layer on 2-μm thick CdS/CdTe thin film solar cells
490
Influence of CdSe quantum dot interlayer on the performance of polymer/TiO2 nanorod arrays hybrid solar cell
491
Influence of CdS-filler on the thermal properties of poly(methyl methacrylate)
492
Influence of CdS-filler on the thermal properties of polystyrene
493
Influence of CDW stacking disorder on metal–insulator transition in 1T-TaS2
494
Influence of Ce addition on impact properties and microstructures of 2519A aluminum alloy
495
Influence of Ce and Al on nodularization of eutectic in austenite–bainite steel
496
Influence of Ce codoping and H2 pre-loading on Er/Yb-doped fiber: Radiation response characterized by Confocal Micro-Luminescence
497
Influence of Ce on Characteristics of Inclusions and Microstructure of Pure Iron Original Research Article
498
Influence of Ce0.35Zr0.55Y0.10 Solid Solution on Peroformance of Pt-Rh Three-Way Catalysts
499
Influence of Ce0.9Gd0.1O2 − δ particles on microstructure and oxygen permeability of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ composite membrane
500
Influence of Ce3+ and Gd3+ co-doping on the structure and upconversion emission in hexagonal Ho3+ doped NaYbF4 phosphors
501
Influence of cell aspect ratio on architecture and compressive strength of titanium foams
502
Influence of cell configuration on measuring interfacial impedances between a solid electrolyte and an electrode
503
Influence of cell construction on the electrochemical reduction of nitrate
504
Influence of Cell Geometry on Division-Plane Positioning
505
Influence of Cell Isolation and Recording Technique on the Voltage Dependence of the Fast Cardiac Sodium Current of the Rat
506
Influence of cell properties on rheological characterization of microalgae suspensions
507
Influence of Cell Shape and Aggregate Formation on the Optical Properties of Flowing Whole Blood
508
Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method
509
Influence of cell size on volume calculation using digital terrain models: A case of coastal dune fields
510
Influence of cell surface hydrophobicity on attachment of Campylobacter to abiotic surfaces Original Research Article
511
Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells
512
Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures
513
Influence of cell wall shape and density on the mechanical behaviour of 2D foam structures Original Research Article
514
Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids
515
Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids
516
Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids
517
Influence of cell-adhesive peptide ligands on poly(ethylene glycol) hydrogel physical, mechanical and transport properties
518
Influence of cell-model boundary conditions on the conductivity and electrophoretic mobility of concentrated suspensions
519
Influence of Cellular Density on Determination of EC50 in Microalgal Growth Inhibition Tests
520
Influence of cellular incorporation of n-3 eicosapentaenoic acid on intracellular Ca2+ concentration and membrane potential in vascular smooth muscle cells Original Research Article
521
Influence of cellularity in human breast carcinoma
522
Influence of Cellulolytic Bacterial Augmentation on Organic Carbon and Available Phosphorus in Sandy Loam Soil under Cultivation
523
Influence of cellulose ether on hydration and carbonation kinetics of mortars
524
Influence of cellulose ethers molecular parameters on hydration kinetics of Portland cement at early ages
525
Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems
526
Influence of cellulose oxygen isotope variability in sub-fossil Sphagnum and plant macrofossil components on the reliability of paleoclimate records at the Mer Bleue Bog, Ottawa, Ontario, Canada
527
Influence of cellulose reinforcers on gas transport through natural rubber
528
Influence of cement addition on the geotechnical properties of an Iranian clay
529
Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars—Part I
530
Influence of cement composition on the early age flexural strength of heat-treated mortar prisms
531
Influence of cement constitution and temperature on chloride binding in cement paste
532
Influence of cement content on concrete performance in corrosive environments (sea water)
533
Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times
534
Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete
535
Influence of cement grouts composition on the rheological behaviour
536
Influence of cement kiln dust substitution on the mechanical properties of concrete
537
Influence of cement properties on new generation superplasticizers performance
538
Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC
539
Influence of cement type in reinforcement corrosion of mortars under action of chlorides
540
Influence of cement type on ITZ porosity and chloride resistance of self-compacting concrete
541
Influence of cement type on the marginal adaptation of all-ceramic MOD inlays
542
Influence of cementitious binder content on moisture transport in stabilised earth materials analysed using 1-dimensional sharp wet front theory
543
Influence of cement-silica ratio on the moulding properties of Portland cement bonded sand
544
Influence of central cracks on buckling and post-buckling behaviour of shear panels
545
Influence of centrifugal forces on the development of wave packets in boundary layers with a uniformly valid model
546
Influence of CeO2 addition on crystal growth behavior of CeO2–Y2O3–ZrO2 solid solution
547
Influence of CeO2 addition on the electrical and optical properties of lithium borate glasses Original Research Article
548
Influence of CeO2 morphology on the catalytic oxidation of ethanol in air
549
Influence of CeO2 on NOx emission during iron ore sintering
550
Influence of CeO2 on scintillating properties of Tb3+-doped silicate glasses
551
Influence of CeO2 on the microstructure and wear resistance of iron-based alloy coating studied by Rietveld refinement method
552
Influence of ceramic coating of MgO on oxidation behavior and descaling ability of low alloy steel
553
Influence of ceramic oxide materials on lithium based potentiometric CO2 sensors
554
Influence of ceramic oxide materials on lithium based potentiometric CO2 sensors
555
Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements
556
Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agents
557
Influence of ceramic thickness on residual stress and bonding strength for plasma sprayed duplex thermal barrier coating on aluminum alloy
558
Influence of ceramic–metal interface adhesion on crack growth resistance of ZrO2–Nb ceramic matrix composites Original Research Article
559
Influence of cereal non-starch polysaccharides and enzyme supplementation on digestion site and gut environment in weaned piglets
560
Influence of cereal type and the inclusion of sunflower meal as a source of additional dietary fibre on nutrient retention, growth performance and digestive organ size in broilers from one to twenty-one days of age
561
Influence of ceria addition on thermal properties and local structure of bismuth germanate glasses
562
Influence of Ceria and Lanthana Promoters on the Kinetics of NO and N2O Reduction by CO over Alumina-Supported Palladium and Rhodium
563
Influence of ceria and nickel addition to alumina-supported Rh catalyst for propane steam reforming at low temperatures Original Research Article
564
Influence of ceria on the NOx storage/reduction behavior of lean NOx trap catalysts
565
Influence of ceria promoter on shell-powder-supported Pd catalyst for the complete oxidation of benzene Original Research Article
566
Influence of cerium (III) ions on corrosion and hydrogen evolution of carbon steel in acid solutions
567
Influence of cerium addition on microstructure and properties of Sn–Cu–(Ag) solder alloys
568
Influence of Cerium and Yttrium on Cu-Cr-Zr Alloys
569
Influence of cerium on hot workability of 00Cr25Ni7Mo4N super duplex stainless steel
570
Influence of cerium on the microstructure and mechanical properties of ZA104 and ZA104 + 0.3Ca magnesium alloys
571
Influence of cerium on the microstructure, mechanical properties and corrosion resistance of magnesium alloy
572
Influence of cerium on the performance of LaMO3+λ (M = Mn or Mn–Cu) perovskite-type catalyst
573
Influence of cerium on the performance of LaMO3+λ (M = Mn or Mn–Cu) perovskite-type catalyst
574
Influence of cerium on the pulsed UV nanosecond laser processing of photostructurable glass ceramic materials
575
Influence of cerium oxide on the formation and oxidation of soot
576
INFLUENCE OF CERTAIN PREY TYPES ON SOME BIOLOGICAL CHARACTERISTICS OF Chrysoperla carnea (STEPH.) UNDER CONSTANT TEMPERATURE AND RELATIVE HUMIDITY.
577
Influence of Cervitec gel on periodontal health of patients wearing fixed orthodontic appliances
578
Influence of cetane improvers on the air quality in an urban street canyon
579
Influence of CETP gene variation on plasma lipid levels and coronary heart disease: a survey in Taiwan
580
Influence of cetyltrimethylammonium bromide on the morphology of AWO4 (A = Ca, Sr) prepared by cyclic microwave irradiation
581
Influence of Cetyltrimethylammonium Bromide on the Voltammetric Behavior of Thiopurines at a Silver Electrode
582
Influence of Cetyltrimethylammonium Bromide on the Voltammetric Behavior of Thiopurines at a Silver Electrode
583
Influence of CF3I, CF3Br, and CF3H on the high-temperature combustion of methane
584
Influence of c-factor and layering technique on microtensile bond strength to dentin
585
Influence of CFC quality on the performance of TS limiter elements under cyclic heat loading
586
Influence of CH3 group of μ-N–C–S ligand on the properties of [Fe2(C4H5N2S)2(NO)4] complex
587
Influence of CH3 substituents on tetrahydropyrimidin-2-ylidene: σ-donating properties and in situ catalytic activities of precursor salts/Pd(OAc)2 system for C–C coupling reactions
588
Influence of CH3COO– on the room temperature photoluminescence of ZnO films prepared by CVD
589
Influence of chain architecture on phase behaviour of styrene-(styrene/butadiene)-styrene triblock copolymers and their binary blends
590
Influence of chain extender length of aromatic dimethacrylates on polymer network development
591
Influence of chain length and degree of branching of alcohol + chlorobenzene mixtures on determination and modelling of VE by CEOS and CEOS/GE mixing rules
592
Influence of chain length and N-alkylation on the selective serotonin receptor ligand 9-(aminomethyl)-9,10-dihydroanthracene
593
Influence of chain length in nonyl-phenol ethoxylate surfactants on the film formation behaviour of methylmethacrylate-2-ethylhexyl acrylate copolymer latexes: part 1. Differential scanning calorimetry and atomic force microscopy
594
Influence of chain length on adsorption of xanthates on chalcopyrite
595
Influence of chain length on mono- versus di-alkylation in the reactivity of [Pt2(μ-S)2(PPh3)4] towards α,ω-dihalo-n-alkanes; a synthetic route to platinum(II) ω-haloalkylthiolate complexes
596
Influence of chain microstructure on the conformational behavior of ethylene-1-olefin copolymers. Impact of the comonomeric mole content and the catalytic inversion ratio
597
Influence of change in land use on the refractory organic macromolecular fraction of a sandy spodosol (Landes de Gascogne, France)
598
Influence of changes in land use and earthworm activities on carbon and nitrogen dynamics in a steepland ecosystem in Northern Vietnam
599
Influence of changes in stem positioning on femoral loading after THR using a short-stemmed hip implant
600
Influence of changes in the prestress force on dynamic specifications of the prestressed concrete beam
601
Influence of changes in the resistivity of the sample surface on ultra-shallow SIMS profiles for arsenic
602
Influence of changes of platinum electrode surface condition on the kinetics of the oxidation of sodium dithionite and sulfite in alkaline solution
603
Influence of changing pulse repetition frequency on chemical and biological effects induced by low-intensity ultrasound in vitro
604
Influence of changing pulse repetition frequency on chemical and biological effects induced by low-intensity ultrasound in vitro
605
Influence of channel aspect ratio on heat transfer characteristics in sharp-turn connected two-pass channels with inclined divider wall
606
Influence of channel aspect ratio on heat transfer in rotating rectangular ducts with skewed ribs at high rotation numbers
607
Influence of channel height on heat transfer augmentation in rectangular channels with two opposite rib-roughened walls
608
Influence of channel shape on the thermal and hydraulic performance of microchannel heat sink
609
Influence of channel tortuosity on the lightning return stroke electromagnetic field in the time domain
610
Influence of channel-height on heat transfer in rectangular channels with skewed ribs at different bleed conditions
611
Influence of channel-width ratio on solvent extraction through a double-pass parallel-plate membrane module
612
Influence of chaos on the fusion enhancement by electron screening
613
Influence of char formation conditions on pressurized black liquor gasification rates Original Research Article
614
Influence of char structure on reactivity and nitric oxide emissions
615
Influence of characterised natural organic material on activated carbon adsorption: I. Characterisation of concentrated reservoir water
616
Influence of characterised natural organic material on activated carbon adsorption: II. Effect on pore volume distribution and adsorption of 2-methylisoborneol
617
Influence of Characteristics of Inhaled Fibres on Development of Tumours in the Rat Lung
618
Influence of Characteristics of Inhaled Fibres on Development of Tumours in the Rat Lung
619
Influence of charge density on rheological properties and dehydration dynamics of weakly charged poly(N-isopropylacrylamide) during phase transition
620
Influence of charge density on the swelling of colloidal poly(N-isopropylacrylamide-co-acrylic acid) microgels
621
Influence of charge density, sulfate group position and molecular mass on adsorption of chondroitin sulfate onto coral
622
Influence of charge deposition in a field-emission display panel
623
Influence of Charge Doping on Thermal Diffusivity of Double Perovskite Sr2FeMoO6 Studied by Mirage Effect
624
Influence of charge mode on the capacity and cycle life of lead–acid battery negative plates
625
Influence of charge placement on the thermal and morphological properties of sulfonated segmented copolyesters
626
Influence of charge size distribution on net-power draw of tumbling mill based on DEM modelling
627
Influence of charge state on the reaction of with carbon monoxide
628
Influence of charge transfer characteristics on size-related effects of organic nanoparticles
629
Influence of charge type on measurements with an in-mill sensor
630
Influence of charged impurities on the surface phases of Sn/Ge(1 1 1)
631
Influence of charged microenvironment on redox potential and diffusion coefficient of [Fe4S4(SPh)4](NBu4)2 in DMF and inside CTAB film on electrode surface
632
Influence of charged particle bombardment and sputtering parameters on the properties of HfO2 films prepared by dc reactive magnetron sputtering
633
Influence of charge-transfer state on luminescence properties of Eu(III) complex with o-phenylenedioxydicarboxylic acid
634
Influence of charging conditions on permeability for the membrane of porous polytetrafluoroethylene (PTFE) film electret
635
Influence of charging energy on Cooper pair tunneling in Bi-2212 small intrinsic Josephson junctions
636
Influence of charging parameters on the effectiveness of electrochemical hydrogen storage in activated carbon
637
INFLUENCE OF CHARGING SYSTEM DESIGN FEATURES ON BLAST FURNACE CHARGE DISTRIBUTION
638
Influence of cheese ripening and rate of cooling of the processed cheese mixture on rheological properties of processed cheese Original Research Article
639
Influence of cheese-making technology on composition and microbiological characteristics of Vastedda cheese
640
Influence of chelaters in crystallization of K2SO4
641
Influence of chelating agent and reaction time on the swelling process for preparation of porous TiO2 particles
642
Influence of chelating agents on plant uptake of 51Cr, 210Pb and 210Po Original
643
Influence of chelating agents on the growth and photoelectrochemical responses of chemical bath-synthesized AgIn5S8 film electrodes
644
Influence of chelating silyl scavengers on the diastereoselectivity of chromium catalyzed pinacol cross couplings
645
Influence of chelating/fuel agents on the structural features, magnetic and dielectric properties of Ni ferrite
646
Influence of chemical activation of a 35% hydrogen peroxide bleaching gel on its penetration and efficacy—In vitro study
647
Influence of chemical activation of a 35% hydrogen peroxide bleaching gel on its penetration and efficacy—In vitro study
648
Influence of chemical additives on the formation of super-fine calcium carbonate
649
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil
650
Influence of chemical agents commonly used for soil fauna investigations on the stable C-isotopic signature of soil animals
651
Influence of Chemical and Biological Fertilizers on Agro-Physiological Characteristics of Corn (Zea mays L., S.C. 703)
652
Influence of chemical and mineralogical properties of organic amendments on the selection of an adequate analytical procedure for trace elements determination
653
Influence of chemical and organic fertilizer on growth, yield and essential oil of dragonhead (Dracocephalum moldavica L.) plant
654
Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization
655
Influence of chemical and physical conditions on the production of bacteriocin by Aeromonas hydrophila
656
Influence of chemical and physical modification on the bile acid binding capacity of dietary fibre from lupins (Lupinus angustifolius L.)
657
Influence of chemical and physical properties of the last generation of silicon carbide fibres on the mechanical behaviour of SiC/SiC composite
658
Influence of chemical bond length changes on the crystal field strength and “ligand–metal” charge transfer transitions in Cs2GeF6 doped with Mn4+ and Os4+ ions Original Research Article
659
Influence of chemical characteristics of humic substances on the partition coefficient of a chlorinated dioxin
660
Influence of chemical composition and magnetic effects on the elastic properties of fcc Fe–Mn alloys Original Research Article
661
Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys
662
Influence of chemical composition and physical structure on normal radiant emittance characteristics of ash deposits
663
Influence of chemical composition and pre-heating temperature on the structure and martensitic transformation in porous TiNi-based shape memory alloys, produced by self-propagating high-temperature synthesis
664
Influence of chemical composition and prior microstructure on diode laser hardening of railroad steels
665
Influence of chemical composition and structural factors of Fe2O3/In2O3 sensors on their selectivity and sensitivity to ethanol
666
Influence of chemical composition of filler’s surface on the burning of foam plastics
667
Influence of chemical composition of polysaccharides on aroma retention
668
Influence of chemical composition of zirconium alloy E110 on embrittlement under LOCA conditions – Part 1: Oxidation kinetics and macrocharacteristics of structure and fracture
669
Influence of chemical composition on dielectric properties of Al2O3 and ZrO2 plasma deposits
670
Influence of Chemical Composition on Phase Transformation Temperature and Thermal Expansion Coefficient of Hot Work Die Steel Original Research Article
671
Influence of chemical composition on sintering ability of ZTA ceramics consolidated from freeze dried granules
672
Influence of chemical composition on the damping characteristics of Cu–Al–Ni shape memory alloys
673
Influence of chemical composition, phase and thickness of TiOx (x ≤ 2) seed layer on the growth and orientation of the perovskite phase in sputtered PZT thin films
674
Influence of chemical composition, prior deformation and prolonged thermal aging on the sensitization characteristics of austenitic stainless steels
675
Influence of chemical conditioning on the ion exchange capacity and on kinetic of zinc uptake by clinoptilolite
676
Influence of chemical crosslinks on the elastic behavior of segmented block copolymers
677
Influence of chemical degradation on mechanical behavior of a petroleum cement paste
678
Influence of chemical modification of activated carbon surface on characteristics of supercapacitors
679
Influence of chemical modification of anthracite on the porosity of the resulting activated carbons Original Research Article
680
Influence of chemical modification on the porous structure of polymeric adsorbents
681
Influence of chemical moieties and the flexible chain for the tilted smectic phases in linear hydrogen bonded liquid crystals with Schiff based pyridene derivatives
682
Influence of chemical nature of organic wastes on their conversion to hydrogen by heat-shock digested sludge
683
Influence of Chemical Parameters on Artemia sp. (Crustacea: Anostraca) Population in Al Wathba Lake in the Abu Dhabi Emirate, UAE
684
Influence of chemical parameters on selectivity and recovery of fine coal through flotation
685
Influence of Chemical Permeation Enhancers on the in vitro Skin Permeation of Minoxidil through Excised Rat Skin: A Mechanistic Study
686
Influence of chemical pollution on brain adenosine receptors of Mugil cephalus
687
Influence of chemical potential on the computer simulation of hydrogen storage in single-walled carbon nanotube array
688
Influence of chemical prehistory on the phase formation and electrochemical performance of LiCoO2 materials
689
Influence of chemical processing on the morphology, crystalline content and thermal stability of multi-walled carbon nanotubes
690
Influence of chemical reaction and thermal radiation on mixed convection heat and mass transfer over a stretching sheet in Darcian porous medium with Soret and Dufour effects
691
INFLUENCE OF CHEMICAL REACTION ON TRANSIENT MHD FREE CONVECTIVE FLOW OVER A VERTICAL PLATE IN SLIP-FLOW REGIME
692
Influence of chemical reaction rate, diffusion and pore structure on the regeneration of a coked Al2O3-catalyst Original Research Article
693
Influence of chemical structure of dyes, of pH and of inorganic salts on their photocatalytic degradation by TiO2 comparison of the efficiency of powder and supported TiO2
694
Influence of chemical structure of short chain pendant groups on gas transport properties of cross-linked poly(ethylene oxide) copolymers
695
Influence of chemical structure on enzymatic degradation of single crystals of PCL-b-PEO amphiphilic block copolymer
696
Influence of chemical structures of benzodioxole-based coinitiators on the properties of the unfilled dental resin
697
Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites
698
Influence of chemical surface treatments on adhesion of fiber posts to composite resin core materials
699
Influence of chemical synthesis on the crystallization and properties of zinc oxide
700
Influence of chemical treatments on the photoinduced charge carrier kinetics of nanocrystalline porous TiO2 films
701
Influence of chemical, enzymatic and phytogenic ensiling preparations on digestibility, degradability and PDI and NEL content of lucerne and red clover
702
Influence of chemically prepared H2SO4-graphite intercalation compound (GIC) precursor on parameters of exfoliated graphite (EG) for oil sorption from water
703
Influence of chemi-ionization and chemi-recombination processes on the population of hydrogen Rydberg states in atmospheres of late type dwarfs
704
Influence of chemisorption on the thermal conductivity of graphene nanoribbons Original Research Article
705
Influence of chemisorption products of carbon dioxide and water vapour on radiolysis of tritium breeder
706
Influence of chemistry and microstructure on the activation volume of TiAl alloys
707
Influence of Chemotherapy on the Lipid Peroxidation and Antioxidant Status in Patients with Acute Myeloid Leukemia
708
Influence of chestnut tannins on welfare, carcass characteristics, meat quality, and lipid oxidation in rabbits under high ambient temperature
709
Influence of chickpea genotype and Bacillus sp. on protection from Fusarium wilt by seed treatment with nonpathogenic Fusarium oxysporum
710
INFLUENCE OF CHICKS AND FOOD QUALITY ON FOOD CALLING IN BROODY DOMESTIC HENS
711
INFLUENCE OF CHICKS AND FOOD QUALITY ON FOOD CALLING IN BROODY DOMESTIC HENS
712
Influence of childhood sexual abuse on pregnancy, delivery, and the early postpartum period in adult women
713
Influence of chipping device and storage method on the quality of SRC poplar biomass
714
Influence of chips, lees and micro-oxygenation during aging on the phenolic composition of a red Sangiovese wine
715
Influence of chiral thiols on the diastereoselective synthesis of γ-lactams from cyclic anhydrides
716
Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils
717
Influence of chitosan and NaCl on physicochemical properties of low-acid tuna oil-in-water emulsions stabilized by non-ionic surfactant
718
Influence of chitosan and porosity on heat and mass transfer in chitosan-treated porous fibrous material
719
Influence of chitosan characteristics on the coagulation and the flocculation of bentonite suspensions
720
Influence of chitosan concentration on the stability, microstructure and rheological properties of O/W emulsions formulated with high-oleic sunflower oil and potato protein
721
Influence of chitosan on stability and lipase digestibility of lecithin-stabilized tuna oil-in-water emulsions
722
Influence of Chlamydia pneumoniae infection on aortic stiffness in healthy young men
723
Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: A 3-year follow-up
724
Influence of chlorhexidine digluconate on the clinical performance of adhesive restorations: A 3-year follow-up
725
Influence of chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends
726
Influence of chloride and bromide anions on localized corrosion of 15%Cr ferritic stainless steel
727
Influence of chloride ion concentration and temperature on the electrochemical properties of passive films formed on a superduplex stainless steel
728
Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels
729
Influence of chloride ion on electrochemical degradation of phenol in alkaline medium using bismuth doped and pure PbO2 anodes
730
Influence of chloride ions on cadmium adsorptions by oxides, hydroxides, oxyhydroxides, and phyllosilicates
731
Influence of chloride ligands on the structure of Zn– and Cd–metallothionein species
732
Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions
733
Influence of chlorine content on PtRe interaction and coke deposition Original Research Article
734
Influence of chlorine dioxide on cell death and cell cycle of human gingival fibroblasts
735
Influence of chlorine on planar optical guide cladded with RbCl and AgCl
736
Influence of Chlorine on the Activity and Stability of Pt/Al2O3 Catalysts in the Complete Oxidation of Toluene
737
Influence of chlorine on the catalytic properties of supported rhodium, iridium and platinum in ring opening of naphthenes Original Research Article
738
Influence of chlorine substitution on intramolecular hydrogen bond energy and ESIPT barrier: Experimental and theoretical measurements on the photophysics of 3,5-dichlorosalicylic acid
739
INFLUENCE OF CHLORMEQUAT CHLORIDE ON FIVE WINTER BARLEY CULTIVARS
740
Influence of chlorpromazine on renal histology of rats submitted to ischemia and reperfusion injury
741
Influence of choice of analgesic agent on the course and outcome of sickle cell patients presented to ICU with acute chest syndrome
742
Influence of cholesterol on the structure of stratum corneum lipid model membrane
743
Influence of cholesterol-loaded cyclodextrin incorporation on the acrosome reaction of cooled equine spermatozoa
744
Influence of Choline-Based Ionic Liquids as Neoteric Green Solvents on Aqueous Solubility of Lamotrigine and Piroxicam Drugs
745
Influence of cholinergic circuitries in generation of high-frequency somatosensory evoked potentials
746
Influence of chopping length on capacities, labour time requirement and costs in the harvest and ensiling chain of maize
747
Influence of chromate, molybdate and tungstate on pit formation in chloride medium
748
Influence of Chromatin and Single Strand Binding Proteins on the Activity of an Archaeal MCM
749
Influence of chromatographic conditions on separation in comprehensive gas chromatography
750
Influence of chrome-bearing sols vacuum impregnation on the properties of magnesia-chrome refractory
751
Influence of chromium and vanadium in the mechanical resistance of steels
752
Influence of chromium carbide coating on tribological performance of steel
753
Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings
754
Influence of chromium content on the optical and electrical properties of Li1 + xCrxTi2 − x(PO4)3
755
Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate
756
Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate
757
Influence of Chromium on Mechanical Properties and CO2/H2S Corrosion Behavior of P110 Grade Tube Steel Original Research Article
758
Influence of chromium on microstructure and sintering properties of FeNiMoCu system prealloyed powders
759
Influence of chromium on minority carrier properties in intentionally contaminated n-type mc-Si wafers
760
Influence of chromophoric electron-withdrawing groups on photoinduced deformation of azo polymer colloids
761
Influence of chromoplast morphology on carotenoid bioaccessibility of carrot, mango, papaya, and tomato
762
Influence of chronic alcohol abuse and liver disease on hepatic aldehyde dehydrogenase activity
763
Influence of Chronic Alcohol Use on Osteoblastic Differentiation of Bone Marrow Cells, Bone Properties, and Hepatic and Renal Morphology of Rats
764
Influence of chronic alcoholism and oestrogen deficiency on the variation of stoichiometry of hydroxyapatite within alveolar bone crest of rats
765
Influence of chronic ethanol intake on mouse synaptosomal aspartyl aminopeptidase and aminopeptidase A: Relationship with oxidative stress indicators
766
Influence of chronic exposure to silver and mercury in the field on the bioaccumulation potential of the bivalve Macoma balthica
767
Influence of chronic levetiracetam intake on cortical excitability
768
Influence of chronic liver disease and chronic renal failure on nutrient metabolism and undernutrition
769
Influence of chronic liver disease on coronary atherosclerosis vulnerability features
770
Influence of Chronic Stroke on Functional Arm Reaching: Quantifying Deficits in the Ipsilesional Upper Extremity
771
Influence of chrysin on hepatic marker enzymes and lipid profile against d-galactosamine-induced hepatotoxicity rats
772
Influence of cigarette smoking on ambulatory blood pressure in patients with essential hypertension
773
Influence of cigarette smoking on rate of reopening of the infarct-related coronary artery after myocardial infarction: multivariate analysis
774
Influence of cigarette smoking on synthesis of eicosanoids, isoprostanes and lipoxygenase metabolites in apical periodontitis
775
Influence of Cigarette Smoking on the Activity of Salivary Alpha-Amylase
776
Influence of cimetidine and its metabolites on Cisplatin—Investigation of adduct formation by means of electrochemistry/liquid chromatography/electrospray mass spectrometry
777
Influence of CIOʹS knowledge-sharing behavior on the quality of the IS/IT strategic planning (ISSP) process in Taiwan
778
Influence of circadian rhythm on mortality after myocardial infarction: Data from a prospective cohort of emergency calls
779
INFLUENCE OF CIRCADIAN TIME AND AGE ON GLOMERULAR ANGIOTENSIN II RECEPTORS IN NORMOTENSIVE SPRAGUE-DAWLEY AND TRANSGENIC HYPERTENSIVE TGR(mREN2)27 RATS
780
Influence of Circuit Imperfections on the Performance of DACs
781
Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading
782
Influence of circumferential flaw length on internal burst pressure of a wall-thinned pipe
783
Influence of cis-protecting groups toward ligand exchange reactions in polynuclear Pd(II)-based coordination cages
784
Influence of citrate and EDTA anticoagulants on plasma malondialdehyde concentrations estimated by high-performance liquid chromatography
785
INFLUENCE OF CITRATE NANOPARTICLES ON PHOTOCHEMICAL ACTIVITY, RESISTANCETO PATHOGENS AND PRODUCTIVITY OF WHEAT
786
Influence of citrate/nitrate ratio on the preparation of Li0.5La0.5TiO3 nanopowder by combustion method
787
Influence of citrate–nitrate reaction mixture packing on ceramic powder properties
788
INFLUENCE OF CITRATES NANOPARTICLES ON MORPHOLOGICAL TRAITS OF BACTERIAL CELLS PSEUDOMONAS SYRINGAE РV. ATROFACIENS
789
Influence of citrate-to-nitrate ratio on the thermal behavior and chemical environment of alumina gel
790
Influence of citric acid and curing on moisture sorption, diffusion and permeability of starch films
791
Influence of citric acid on the hydration of Portland cement
792
Influence of citric acid on the morphology and magnetic properties of barium ferrite thin films
793
Influence of clamping force on the performance of PEMFCs
794
Influence of class F fly ash on the abrasion–erosion resistance of high-strength concrete
795
Influence of classification levels of ram sexual activity on spring breeding ewes
796
Influence of Clavicipitaceous Endophyte Infection in Ryegrass on Development of the ParasitoidMicroctonus hyperodaeLoan (Hymenoptera: Braconidae) inListronotus bonariensis(Kuschel) (Coleoptera: Curculionidae)
797
Influence of clay addition on the properties of olive oil in water emulsions
798
Influence of clay charge densities and surfactant loading amount on the microstructure of CTMA–montmorillonite hybrids
799
Influence of clay content and acidity of soil on development of the earthworm Lumbricus rubellus and its population level consequences
800
Influence of Clay Content in Reservoir Rocks on Efficiency of Killing Production Wells
801
Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene composites
802
Influence of clay in limestone fillers for self-compacting cement based composites
803
Influence of clay mineralogy on the stability of a landslide in Plio-Pleistocene clay sediments near Grassano (Southern Italy)
804
Influence of clay minerals addition on mechanical properties of air lime–metakaolin mortars
805
Influence of clay minerals on the Bacillus halophilus Y38 activity under anaerobic condition
806
Influence of clay minerals on the reduction of Cr6+ by citric acid Original Research Article
807
Influence of clay modification process in PA6-layered silicate nanocomposite properties
808
Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites
809
Influence of Clay on Time Domain Induced Polarization
810
Influence of clay organic modifier on the thermal-stability of PLA based nanocomposites
811
Influence of clays on the rheology of cement pastes
812
Influence of clays on the shrinkage and cracking tendency of SCC
813
Influence of cleaning frequency and membrane history on fouling in an anaerobic membrane bioreactor Original Research Article
814
Influence of cleaning using water and surfactants on the performance of photovoltaic panels
815
Influence of Cleanliness on Mechanical Property of 40CrNi2Mo Steel Original Research Article
816
Influence of clear versus ambiguous normative information on food intake
817
Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: A finite element study with biphasic acetabular cartilage properties
818
Influence of clearances on the energy performance of window-type air-conditioners at the same level outside residential buildings
819
Influence of clear-cutting on the risk of wind damage at forest edges
820
Influence of climate and hydrology on carbon in an early Miocene peatland
821
Influence of climate change on interannual variation in contaminant body burden in Gulf of Mexico oysters
822
Influence of Climate Change on Natural Degreening of Lemons (Citrus limon L. Burm. f)
823
Influence of climate change on short term management of field crops – A modelling approach
824
Influence of climate conditions on aflatoxin M1 contamination in raw milk from Minas Gerais State, Brazil
825
Influence of climate fluctuations and changes in catchment land use on Late Holocene and modern beach-ridge sedimentation on a tropical macrotidal coast: Keppel Bay, Queensland, Australia
826
Influence of climate on seasonal patterns of stem increment of balsam fir in a boreal forest of Québec, Canada
827
Influence of climate parameters and management of permanent grassland on biogas yield and GHG emission substitution potential
828
Influence of climate variability on representative QDF predictions of the upper Blue Nile basin
829
Influence of climate variability on the atmospheric transport of Icelandic tephra in the subpolar North Atlantic
830
Influence of climate, fire severity and forest mortality on predictions of long term streamflow: Potential effect of the 2009 wildfire on Melbourne’s water supply catchments
831
Influence of climate, sea-level changes and tectonics on ichnoassemblages distribution in a carbonate-dominated, deep-marine environment (Upper Paleocene, Zumaya section)
832
Influence of climatic conditions and control logic on NOx and CO emissions of a micro-cogeneration unit serving an Italian residential building
833
Influence of climatic conditions and soil type on 99TcO4– uptake by rye grass
834
Influence of climatic conditions on the phenolic composition of Vitis vinifera L. cv. Graciano Original Research Article
835
Influence of Climatic Factors on Forage Production and Vegetation Cover of Iran's Upland Rangeland (Jashloobar Rangeland, Semnan Province)
836
Influence of Climatic Factors on Fusarium Species Pathogenic to Cereals
837
Influence of Climatic Factors on Malaria Epidemic in Gulu District, Northern Uganda: A 10-Year Retrospective Study
838
INFLUENCE OF CLIMATIC FACTORS ON POPULATION DENISTY OF LAND SNAILS INFESTING SOME CROPS AND THEIR DAMAGE QUESSNA DISTRICT (MINUFYA GOVERNORATE).
839
Influence of climatic factors on the development of pneumonia in lambs
840
Influence of climatic variability on local population dynamics of a Sonoran Desert platyopuntia
841
Influence of climatological cycles on hydraulic heads across a Spanish aquifer
842
Influence of clinical case definitions with differing levels of sensitivity and specificity on estimates of the relative and absolute health benefits of influenza vaccination among healthy working adults and implications for economic analyses
843
Influence of clinical trial enrollment on the quality of care and outcomes for patients with non–ST-segment elevation acute coronary syndromes
844
Influence of clinician workload and patterns of treatment on survival from breast cancer
845
Influence of Clonidine on the Chemodynamic Stability and Stress Response in the Course of Surgery on General Anesthesia
846
Influence of cloning by chromatin transfer on placental gene expression at Day 45 of pregnancy in cattle
847
Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation Original Research Article
848
Influence of clotting time on the protein composition of serum samples based on LC–MS data
849
Influence of Clove Weight on Vegetative Growth and Yield of Garlic (Allium sativum L.) Grown under Drip Irrigation
850
Influence of cluster composition on NLO properties of neutral cubane-like heterothiometallic clusters
851
Influence of cluster mobility on Cu precipitation in α-Fe: A cluster dynamics modeling Original Research Article
852
Influence of cluster size and surface functionalization of ZnO nanoparticles on the morphology, thermomechanical and piezoelectric properties of P(VDF-TrFE) nanocomposite films
853
Influence of cluster states on band dispersion in bulk and quantum well (ultra-)dilute nitride semiconductors
854
Influence of cluster zone leaf removal on Pinot noir grape chemical and volatile composition
855
Influence of clusters on Bi LMIS properties
856
Influence of clusters on Bi LMIS properties
857
Influence of Co addition on constituent phases and performance of a NiCrAlYRe alloy system
858
Influence of CO adsorption on the magnetism of small Co particles deposited on Al2O3
859
Influence of CO concentration and reactant gas pressure on cell performance in PAFC
860
Influence of Co content on the characterization and magnetic properties of magnetite
861
Influence of Co content on the structure and magnetic permeability of nanocrystalline (Fe1−xCox)73.5Cu1Nb3Si13.5B9 alloys
862
Influence of Co doping content on its valence state in Zn1−xCoxO (0 ≤ x ≤ 0.15) thin films
863
Influence of Co doping on structural, optical and magnetic properties of BiFeO3 films deposited on quartz substrates by sol–gel method
864
Influence of CO on Titan atmospheric reactivity
865
Influence of Co substitution and Cu addition on structural, electrical, transport and electrochemical properties of LixNi0.9 − yCoyMn0.1O2 cathode materials
866
Influence of Co substitution for Ni and Mn on the structural and electrochemical characteristics of LiNi0.5Mn1.5O4
867
Influence of Co substitution on magnetic properties and thermal expansion of Nd6Fe13Si intermetallic compound
868
Influence of Co(CH3COO)2 concentration on thermal emissivity of coatings formed on titanium alloy by micro-arc oxidation
869
Influence of Co, Ga and Si on the microstructure and the magnetic properties for nanocomposite permanent alloys
870
Influence of Co, Ni and Zn substitution for Cu on the structural and superconducting properties of (Hg0.7Cr0.3)Sr2CuO4+δ Original Research Article
871
Influence of CO2 activation on hydrogen storage behaviors of platinum-loaded activated carbon nanotubes
872
Influence of CO2 and H2 on the low-temperature water–gas shift reaction on Au/CeO2 catalysts in idealized and realistic reformate
873
Influence of CO2 and H2O on the separation of hydrogen over two types of Pd membranes: Thin metal membrane and pore-filling-type membrane
874
Influence of CO2 dynamics on the longitudinal variation of incision rates in soluble bedrock channels: Feedback mechanisms
875
Influence of CO2 laser heat treatment on surface properties, electrochemical and tribological performance of HVOF sprayed WC–24%Cr3C2–6%Ni coating
876
Influence of CO2 Laser Irradiation and CPP-ACP Paste Application on Demineralized Enamel Microhardness
877
Influence of CO2 on the oxygen permeation performance and the microstructure of perovskite-type (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ membranes
878
Influence of CO2 on the oxygen permeation performance of perovskite-type BaCoxFeyZrzO3−δ hollow fiber membranes
879
Influence of CO2, CH4, and initial temperature on H2/CO laminar flame speed
880
Influence of co-administration of oral insulin and docosahexaenoic acid in mice
881
Influence of coal bottom ash as fine aggregate on fresh properties of concrete
882
Influence of coal briquette size on the combustion kinetics
883
Influence of coal composition on the release of Na-, K-, Cl-, and S-species during the combustion of brown coal
884
Influence of coal dust on premixed turbulent methane–air flames
885
Influence of coal dust on the ignition of methane/air mixtures by friction sparks from rubbing of titanium against steel
886
Influence of coal forced oxidation on technological properties of cokes produced at laboratory scale
887
Influence of coal particle size on particulate matter emission and its chemical species produced during coal combustion
888
Influence of coal tar–water emulsion on carbonisation of caking coals
889
Influence of coal thermoplastic properties on coking pressure generation: Part 2 – A study of binary coal blends and specific additives
890
Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends
891
Influence of coalescence behaviour of the liquid and of gas sparging on hydrodynamics and bubble characteristics in a bubble column
892
Influence of coal-feed rates on bituminous coal ignition in a full-scale tiny-oil ignition burner
893
Influence of coanions on construction of copper(II)/4,4′-dipyridyl sulfide(dps) coordination polymers
894
Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete
895
Influence of coarse particles on microstructure of aluminum nitride sintered body
896
Influence of coat colour, season and physiological status on reproduction of rabbit does in an Algerian local population
897
Influence of coated seeds on soil organisms tested with bait lamina
898
Influence of coating and thermal annealing on the structure and luminescence properties of CuO nanorods
899
Influence of Coating Application Methods on the Postharvest Quality of Cassava
900
Influence of coating conditions on the H2 separation performance from H2/CH4 gas mixtures by the PDMS/PEI composite membrane
901
Influence of coating microstructure on the abrasive wear resistance of WC/Co cermet coatings
902
Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites
903
Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete
904
Influence of coating thickness and substrate elasticity on the tribological performance of PEEK coatings
905
Influence of coating thickness and temperature on mechanical properties of steel deposited with Co-based alloy hardfacing coating
906
Influence of coating thickness on rolling contact fatigue of alumina ceramics thermally sprayed on steel roller
907
Influence of coating thickness on the galvanic corrosion properties of Mg oxide in an engine coolant
908
Influence of coatings on microstructure and mechanical properties of preceramic paper-derived porous alumina substrates
909
Influence of co-authorship networks in the research impact: Ego network analyses from Microsoft Academic Search
910
Influence of coaxial-rod- and coaxial-blade-type baffles on bed expansion in gas–solid fluidization
911
Influence of cobalt and manganese content on the dehydrogenation capacity and kinetics of air-exposed LaNi5+x-type alloys in solid gas and electrochemical reactions
912
Influence of cobalt content on nanostructured alpha-phase-nickel hydroxide modified electrodes for electrocatalytic oxidation of isoniazid
913
Influence of cobalt on phase transitions in Ni50Mn37Sn13
914
Influence of cobalt on structural and magnetic properties of nickel ferrite nanoparticles
915
Influence of cobalt oxide addition on electrical properties of ZnO-Pr6O11-based varistor ceramics
916
Influence of cobalt phase on mechanical properties and thermal shock performance of Al2O3–TiC composites
917
Influence of cobalt precursor and fuels on the performance of combustion synthesized Co3O4/γ-Al2O3 catalysts for total oxidation of methane Original Research Article
918
Influence of cobalt substitution on the magnetic properties of zinc nanocrystals synthesized via micro-emulsion route
919
Influence of co-bivalent ions in Cu-containing LDHs and solvent on hydroxylation of benzene to phenol
920
Influence of co-cations in the selective catalytic reduction of NO by NH3 over copper exchanged faujasite zeolites
921
Influence of cocoa butter refining on the quality of milk chocolate Original Research Article
922
Influence of co-combustion of coal/biomass on the corrosion
923
Influence of coconut water on hemostasis
924
Influence of cod freshness on the salting, drying and desalting stages Original Research Article
925
Influence of COD:N:P Ratio on Nitrogen and Phosphorus Removal in Fixed-Bed Filter
926
Influence of codeposition of copper on the structure and morphology of electroless Ni–W–P alloys from sulphate- and chloride-based baths
927
Influence of coding strategies in electric-acoustic hearing: A simulation dedicated to EAS cochlear implant, in the presence of noise
928
Influence of co-doping different rare earth ions on CaGa2S4: Eu2+, RE3+(RE=Ln) phosphors Original Research Article
929
Influence of co-doping different rare earth ions on the luminescence of CaAl2O4-based phosphors
930
Influence of co-doping of Zn(II)+Fe(III) on the photocatalytic activity of TiO2 for phenol degradation
931
Influence of Co-doping on the thermal, structural, and optical properties of sol–gel derived ZnO nanoparticles
932
Influence of co-down-regulation of caspase-3 and caspase-7 by siRNAs on sodium butyrate-induced apoptotic cell death of Chinese hamster ovary cells producing thrombopoietin
933
Influence of coefficient of friction on fretting fatigue crack nucleation prediction
934
Influence of coenzyme Q10 and cerivastatin on the flow-mediated vasodilation of the brachial artery: results of the ENDOTACT study
935
Influence of CO-evolving groups on the activity of activated carbon fiber for SO2 removal
936
Influence of co-existed benzo[a]pyrene and copper on the cellular characteristics of Stenotrophomonas maltophilia during biodegradation and transformation
937
Influence of coexistent salt on hydrothermal synthesis of smectite and film-formability of the smectite
938
Influence of coexisting Al2O3 on the activity of copper catalyst for water–gas-shift reaction
939
Influence of coexisting surface-active agents on leachability of dioxins in raw and treated fly ash from an MSW incinerator
940
Influence of Cognettia sphagnetorum (Enchytraeidae) on birch growth and microbial activity, composition and biomass in soil with or without wood ash
941
Influence of cognition on personal activities of daily living (P-ADL) in the acute phase: The Gothenburg Cognitive Stroke Study in Elderly
942
Influence of Cognitive Behavioral Therapy on Psychological Wellbeing and Ego-Resiliency in Type 2 Diabetes Patients in Sabzevar
943
Influence of cognitive distance in vacation choice
944
Influence of coherent structures on mass transfer near stagnation region in agitated small tanks
945
Influence of Cohesion on Scour under Submerged Circular Vertical Jets
946
Influence of cohesive and disruptive forces on strength and erodibility of tropical soils
947
Influence of Coiled Wire Presence on the Convective Heat Transfer Coefficients in R-600 Condensers
948
Influence of cointercalated HF on the electrochemical behavior of highly fluorinated graphite
949
Influence of coion and counterion size on multi-ionic solution nanofiltration
950
Influence of coke deactivation and vanadium and nickel contamination on the performance of low ZSM-5 levels in FCC catalysts Original Research Article
951
Influence of coke deposits on the selectivity of m-xylene transformation and on the isomerization mechanism Original Research Article
952
Influence of coke formation on the conversion of hydrocarbons: I. Alkanes on a USY-zeolite Original Research Article
953
Influence of coke formation on the conversion of hydrocarbons: II. i-Butene on HY-zeolites Original Research Article
954
Influence of coke particle characteristics on the compaction properties of carbon paste material
955
Influence of cold and hot pressing on densification behaviour of titanium alloy powder Ti6Al4V
956
Influence of cold extrusion on the microstructure and mechanical properties of an aluminium alloy previously subjected to equal channel angular pressing
957
Influence of cold pre-fermentation treatments on the major volatile compounds of three wine varieties
958
Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel
959
Influence of cold rolling on sensitization and intergranular stress corrosion cracking of AISI 304 aged at 500 °C
960
Influence of cold rolling reduction on the deformation behaviour and crystallographic orientation development
961
Influence of cold storage and blanching on the carotenoid content of Kintoki carrots Original Research Article
962
Influence of cold storage on pupal development and mortality during storage and on post-storage performance of Encarsia formosa and Eretmocerus eremicus (Hymenoptera: Aphelinidae)
963
Influence of cold storage on soil microbial community level physiological profiles and implications for soil quality monitoring
964
Influence of cold storage on soil microbial community level physiological profiles and implications for soil quality monitoring
965
INFLUENCE OF COLD STORAGE ON THE VIABILITY OF VEDALIA BEETLE, Rodolia cardinalis (MULSANT) (COLEOPTERA: COCCINELLIDAE)
966
Influence of cold weather during casting and curing on the stiffness and strength of concrete
967
Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi
968
Influence of cold work and heat treatment on the shape memory effect and plastic strain development of NiTi
969
Influence of cold work and texture on the high-strain-rate response of Nitinol
970
Influence of cold work to increase swelling of pure iron irradiated in the BR-10 reactor to ∼6 and ∼25 dpa at ∼400°C
971
Influence of cold-pressed canola, brewers grains and hominy meal as dietary supplements suitable for reducing enteric methane emissions from lactating dairy cows
972
Influence of Cold-storage Temperatures on Strawberry Rot Caused by Botrytis cinerea
973
Influence of cold-work and aging heat treatment on strength and ductility of MP35N
974
Influence of cold-work and aging heat treatment on strength and ductility of MP35N
975
Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels
976
Influence of Collateral Circulation on In-Hospital Death From Anterior Acute Myocardial Infarction
977
Influence of colloidal fouling and feed water recovery on salt rejection of RO and NF membranes Original Research Article
978
Influence of colloidal fouling on rejection of trace organic contaminants by reverse osmosis
979
Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization
980
Influence of colloidal templates on the impedance spectroscopic behaviour of Pr0.7Sr0.3Fe0.8Ni0.2O3 for solid oxide fuel cell applications
981
Influence of colloidal-gold films on the luminescence of Eu(TTFA)3 in PMMA
982
Influence of colony genotypic composition on the performance of hygienic behaviour in the honeybee, Apis mellifera L.
983
Influence of color coordinates on the color changes after polymerization and thermocycling of dental resin composites
984
Influence of color on fire vehicle accidents
985
Influence of color parameters of resin composites on their translucency
986
Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer
987
Influence of coloring voltage on the optical performance and cycling stability of a polyaniline–indium hexacyanoferrate electrochromic system
988
Influence of colour changes and moisture content during banana drying on laser backscattering
989
Influence of coloured noise on the extinction risk in structured population models Original Research Article
990
Influence of column temperature on the ion chromatographic separation of aluminum species Original Research Article
991
Influence of columnar microstructure of a sputtered NiAl coating on its oxidation behavior at 1000 °C
992
INFLUENCE OF COMBINATIONS OF ALLELOPATHIC WATER EXTRACTS OF DIFFERENT PLANTS ON WHEAT AND WILD OAT
993
Influence of combinations of sublethal stresses on the control of Vibrio parahaemolyticus and its cellular oxidative response
994
Influence of combined acid treatment on physico-chemical characteristics of ultrastable zeolite Y and on its catalytic properties in the disproportionation of ethylbenzene Original Research Article
995
Influence of combined activation treatments on the success of bovine nuclear transfer using young or aged oocytes
996
Influence of Combined Administration of Turmeric and Black Seed on Selected Biochemical Parameters of Diabetic Rats
997
Influence of combined AFM/current measurement on local electronic properties of silicon thin films
998
Influence of combined alkaline treatment and Fe–Ti-loading modification on ZSM-5 zeolite and its catalytic performance in light olefin production
999
Influence of combined changes in salinity and copper modulation on growth and copper uptake in the tropical green macroalga Ulva reticulata
1000
Influence of combined electromagnetic fields on the heat/mass transfer in the Bridgman process