ليست عنوان مقالات لاتين Influence of different levels of traffic pollution on haemoglobin content in the earthworm Lumbricus terrestris Influence of fatty acid chain length and cis/trans isomerization on postprandial lipemia and factor VII in healthy subjects (postprandial lipids and factor VII)

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Influence of different levels of traffic pollution on haemoglobin content in the earthworm Lumbricus terrestris

2

Influence of different light curing units on the cytotoxicity of various dental composites

3

Influence of different light sources on visual shade matching performance

4

Influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin

5

Influence of different maceration times on the anthocyanin composition of wines made from Vitis vinifera L. cvs. Boğazkere and Öküzgözü Original Research Article

6

Influence of different make-up air configurations on the fire-induced conditions in an atrium

7

Influence of different maltodextrins on properties of O/W emulsions

8

INFLUENCE OF DIFFERENT MEAL SIZES ON GROWTH CHARACTERISTICS OF YOUNG RAINBOW TROUT (ONCORHYNCHUS MYKISS WAL).

9

Influence of different means of turbine blade cooling on the thermodynamic performance of combined cycle

10

Influence of different mobile phase compositions on detection of Ochratoxin A

11

Influence of different modes of real time visual information on single aimed movements

12

Influence of different morphologies on electrochemical performance of spinel LiMn2O4

13

Influence of different natural physical fields on biological processes Original Research Article

14

Influence of different natural zeolite concentrations on the anaerobic digestion of piggery waste

15

Influence of different nitrate and iron availabilities on phosphoenolpiruvate carboxilase and malate dehydrogenase in roots of maize (Zea mays L.) plants

16

Influence of different nitrogen rates and DMPP nitrification inhibitor on annual N2O emissions from a subtropical wheat–maize cropping system

17

Influence of Different Nitrogen Sources on Amount of Chitosan Production by Aspergillus niger in Solid State Fermentation

18

Influence of different nitrogen to silica ratios and artificial mixing on the structure of a summer phytoplankton community from the Swedish west coast (gullmar fjord)

19

Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime

20

Influence of different outdoor design conditions on design cooling load and design capacities of air conditioning equipments

21

Influence of different oxidation states of chromium (VI, III) on soil urease activity

22

Influence of different parameters on calcium hexaluminate reaction sintering by Spark Plasma

23

Influence of different parameters on drug release from hydrogel systems to a biomembrane model. Evaluation by differential scanning calorimetry technique

24

Influence Of Different Pathological States On Adrenergic Control Of The Renal Hemodynamics: Shift In The Functionality Of The Renal Aradrenoceptors

25

Influence of different pectins on powder characteristics of microencapsulated anthocyanins and their impact on drug retention of shellac coated granulate Original Research Article

26

Influence of Different Percentages of Copper on the Size and Optical Properties of Ag-Cu Nanoparticles Formed by Wet-Chemical Method

27

Influence of different perovskite interlayers on the electrical conductivity between La0.65Sr0.3MnO3 and Fe/Cr-based steels

28

Influence of different plant species on water repellency in Mediterranean heathland soils

29

Influence of Different Planting Dates and Media on Growth of Kiwifruit (Cv. Hayward) Cuttings

30

Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests

31

Influence of different plasticizers on the response of chemical sensors based on polymeric membranes for nitrate ion determination

32

Influence of different polishing conditions on the skid resistance development of asphalt surface

33

Influence of different polymeric gels on the ectopic bone forming ability of an osteoinductive biphasic calcium phosphate ceramic

34

Influence of different polymerisation parameters on the separation efficiency of monolithic poly(phenyl acrylate-co-1,4-phenylene diacrylate) capillary columns

35

Influence of different post luting cements on the fracture strength of endodontically treated teeth: An in vitro study

36

Influence of different posts and cores on marginal adaptation, fracture resistance, and fracture mode of composite resin crowns on human mandibular premolars. An in vitro study

37

Influence of different post-treatments on the structure and optical properties of zinc oxide thin films

38

Influence of Different Power Outputs of Er:YAG Laser on Shear Bond Strength of a Resin Composite to Feldspathic Porcelain

39

Influence of different practices on biogas sustainability

40

Influence of different preservation treatments on the volatile fraction of desalted cod

41

Influence of different pre-treatment methods on isolation of extracts with strong antibacterial activity from lichen Usnea barbata using carbon dioxide as a solvent

42

Influence of different processing methods on the glycemic index of potato (Nicola)

43

Influence of different processing methods on the glycemic index of potato (Nicola)

44

Influence of different production strategies on the stability of color, oxygen consumption and metmyoglobin reducing activity of meat from Ningxia Tan sheep

45

Influence of Different Proportions of External Irrigation During the Er,Cr:YSGG Laser Irradiation on Wear and Roughness of Root Surface

46

Influence of different proteolytic strains of Streptococcus thermophilus in co-culture with Lactobacillus delbrueckii subsp. bulgaricus on the metabolite profile of set-yoghurt

47

Influence of different purification and drying methods on rheological properties and viscoelastic behaviour of durian seed gum

48

Influence of different rare earth ions on hydrogen transfer over Y zeolite Original Research Article

49

Influence of different rates of nitrogen fertilizer on growth, yield and fruit quality of sweet pepper (Capsicum annum L. var. California Wander)

50

Influence of different reproductive rhythms on serum estradiol and testosterone levels, features of follicular population and atresia rate, and oocyte maturation in controlled suckling rabbits

51

Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets

52

Influence of different ruthenium(II) bipyridyl complex on the photocatalytic H2 evolution over TiO2 nanoparticles with mesostructures

53

Influence of different salts in poly(vinylidene fluoride-co-trifluoroethylene) electrolyte separator membranes for battery applications

54

Influence of different seeds on transformation of aluminum hydroxides and morphology of alumina grains by hot-pressing

55

Influence of different selenium sources on performance, blood and meat selenium content of fattening lambs

56

Influence of different semen extenders and seminal plasma on the inflammatory response of the endometrium in oestrous mares

57

Influence of different shortening velocities preceding stretch on human triceps surae moment generation in vivo

58

Influence of different shrinking temperatures and vacuum conditions on the ability of psychrotrophic Clostridium to cause ‘blown pack’ spoilage in chilled vacuum-packaged beef

59

Influence of different silica derivatives in the immobilization and stabilization of a Bacillus licheniformis protease (Subtilisin Carlsberg)

60

Influence of different site symmetries of Eu3+ centers on the luminescence properties of Anderson-based compounds

61

Influence of Different Sites on Lilium Flower and Bulb Production in Cold Desert Region of Himachal Pradesh, India

62

Influence of different smoke generation methods on the contents of polycyclic aromatic hydrocarbons (PAH) and phenolic substances in Frankfurter-type sausages

63

Influence of different soluble dietary fibers on the bioaccessibility of the minor Fusarium mycotoxin beauvericin

64

Influence of different solvent polarities on the phenolics, flavonoids and antioxidant properties of the fruit of Xylopia aethiopica (Dunal) A. Rich

65

Influence of different solvent polarities on the phenolics, flavonoids and antioxidant properties of the fruit of Xylopia aethiopica (Dunal) A. Rich

66

INFLUENCE OF DIFFERENT SOURCES AND LEVELS OF NITROGEN AND ROCK PHOSPHATE ADDITION ON MAIZE PRODUCTIVITY AND SOIL FERTILITY

67

Influence of different sources of error on estimated kinetics parameters for a second-order reaction

68

Influence of Different Sources of Natural Pigmenting on Egg Quality and Performance of Laying Hens

69

Influence of different spacer arms on Mimetic Ligand™ A2P and B14 membranes for human IgG purification

70

Influence of Different Steam Cooling Techniques for High Pressure Turbine Blades on the Performance of Gas Turbine

71

Influence of different sterilization methods on callus initiation and production of pigmented callus in Arnebia densiflora Ledeb.

72

Influence of Different Storage Conditions on the Mycotoxin Production and Quality of Fusarium-Infected Wheat Grain

73

Influence of Different Storage Media, Temperatures and Time Duration on Susceptibility of Ornithobacterium rhinotracheale

74

Influence of different storage times and temperatures on blood gas and acid-base balance in ovine venous blood

75

Influence of different strains of Agrobacterium rhizogenes, culture medium, age and type of explant on hairy root induction in Echinacea angustifolia

76

Influence of Different Strains of Azotobacter on Essential Oil Components of Garden Thyme

77

Influence of different structured channels of mesoporous silicate on the controlled ibuprofen delivery

78

Influence of Different Subsistence States of CeO2-ZrO2 Mixed Oxides in Catalyst Coating on Catalytic Properties

79

INFLUENCE OF DIFFERENT SUGAR CRYOPROTECTANTS ON THE STABILITY AND PHYSICO-CHEMICAL CHARACTERISTICS OF FREEZE-DRIED 5-FLUOROURACIL PLURILAMELLAR VESICLES

80

Influence of different sugars on pullulan production and activities of α-phosphoglucose mutase, UDPG-pyrophosphorylase and glucosyltransferase involved in pullulan synthesis in Aureobasidium pullulans Y68

81

Influence of different sugars on pullulan production and activities of α-phosphoglucose mutase, UDPG-pyrophosphorylase and glucosyltransferase involved in pullulan synthesis in Aureobasidium pullulans Y68

82

Influence of different sulfur compounds on corrosion due to naphthenic acid

83

Influence of Different Sulphate Salts as Anolytes Towards the Performance of Copper(II) Recovery by using an Electrogenerative Process

84

Influence of different surface modification technologies on friction of conformal tribopair in mixed and boundary lubrication regimes

85

Influence of different surface modification treatments on poly( , -lactic acid) with silk fibroin and their effects on the culture of osteoblast in vitro

86

Influence of different surface treatments on microshear bond strength of repair resin composite to two CAD/CAM esthetic restorative materials

87

Influence of different surface treatments on surface zirconia frameworks

88

Influence of different surface treatments on surface zirconia frameworks

89

Influence of Different Surface Treatments on the Shear Bond Strength of Resin Cement to Base Metal Alloys

90

Influence of different surfactants on crystal growth behavior and sinterability of La2Ce2O7 solid solution

91

Influence of different suspension stabilizers on the preparation of Rubitherm RT31 microcapsules

92

Influence of Different Tapered Implants on Stress and Strain Distribution in Bone and Implant: A Finite Element Analysis

93

INFLUENCE OF DIFFERENT TEHNOLOGICAL PROCEDURES ON QUALITY OF MALVASIA WINE

94

Influence of different temperature regimes on seed setting behavior and productivity traits in rabi sorghum

95

Influence of different temperatures on bud break and 1-aminocyclopropane-1-carboxylic acid content of young peach trees

96

INFLUENCE OF DIFFERENT TEMPERATURES ON THE BIOLOGICAL ASPECTS OF Eutetranychus africanus (Tucker) (ACARI:TETRANYCHIDAE:PROSTIGMATA)

97

Influence of different templates on the textured Bi0.5(Na1−xKx)0.5TiO3 piezoelectric ceramics by the reactive templated grain growth process

98

Influence of different tillage practices and earthworm on selected soil physio-chemical parameters and yield of maize

99

Influence of different treatment planning techniques on radiation doses to the heart, left anterior descending coronary artery and left lung in the radiotherapy of left-sided breast cancer patients

100

Influence of different treatments on characteristics of nanooxide powders alone or with adsorbed polar polymers or proteins

101

Influence of Different Types and Amounts of Organic Manure on Soil Physical Properties, Wheat (Triticum aestivum L.) Yield and Correlation between Traits

102

Influence of different types and proportions of added edible seaweeds on characteristics of low-salt gel/emulsion meat systems

103

Influence of different types of bedding materials on immune response and serum biochemical profile of caged mice

104

Influence of different types of carbon nanotubes on muscle cell response

105

Influence of different types of exercise on the expression of haem oxygenase-1 in leukocytes

106

Influence of different types of fertilisers on the major antioxidant components of tomatoes

107

Influence of different types of fertilisers on the major antioxidant components of tomatoes

108

Influence of different types of heating systems on particulate air pollutant deposition: The case of churches situated in a cold climate

109

Influence of different types of surface electrodes on amplitude, area and duration of the compound muscle action potential

110

Influence of different ureas on aggregational properties of aqueous surfactant systems

111

INFLUENCE OF DIFFERENT VARIETIES AND PLANTING DATES ON THE MAIN PESTS INFESTING KIDNEY BEANS.

112

Influence of Different Vehicles on the pH and Surface Tension of Calcium Hydroxide Pastes

113

Influence of different volume ratios on the isodispersion point in sequential injection analysis

114

Influence of different water quantities and qualities on lemon trees and soil salt distribution at the Jordan Valley

115

INFLUENCE OF DIFFERENT WEED MANAGEMENT PRACTICES ON YIELD OF GARLIC CROP

116

Influence of different yeast cell-wall mutants on performance and protection against pathogenic bacteria (Vibrio campbellii) in gnotobiotically-grown Artemia

117

Influence of different β-glucans on the physical and rheological properties of egg yolk stabilized oil-in-water emulsions

118

Influence of differential compaction above basement steps on salt tectonics in the Ligurian-Provençal Basin, northwest Mediterranean

119

Influence of differential diffusion on maximum flame temperature in turbulent nonpremixed hydrogen/air flames

120

Influence of differentially heated horizontal walls on the streaming shape and velocity in a standing wave resonator

121

Influence of differently modified palygorskites in the immobilization of a lipase

122

Influence of differing radiotherapy strategies on treatment results in diffuse large-cell lymphoma: a review

123

Influence of diffuse sources on levels and distribution of polychlorinated biphenyls in the Guadiana River estuary, Portugal

124

Influence of Diffusion and Gravity on the Adhesion of a Two-component Mixture of Hard Spheres on a Flat Surface

125

Influence of diffusion coefficient on chloride ion penetration of concrete structure

126

Influence of diffusion layer properties on low temperature DMFC

127

Influence of diffusion of fuel-efficient motor vehicles on gasoline demand for individual user owned passenger cars

128

Influence of diffusion of magnetic particles on stability of a static magnetic fluid seal under the action of external pressure drop

129

Influence of diffusion on nonradiative energy transfer between FMN molecules in aqueous solutions

130

Influence of diffusion on W sputtering by carbon

131

Influence of diffusional stress relaxation on growth of stoichiometric precipitates in binary systems Original Research Article

132

Influence of digital current control strategy on the sensitivity to electrical parameter uncertainties of induction motor indirect field-oriented control

133

Influence of digitalis on left ventricular functional response to exercise in congestive heart failure

134

Influence of dihedral angle on the seismic velocities in partially molten rocks

135

Influence of Dihydrogen and Water Vapor on the Kinetics of CO Oxidation over Au/Al2O3

136

Influence of Dilation Angle of Soil on Seismic Displacements of Gravity Retaining Walls using Upper Bound Limit Analysis Method

137

Influence of diluent and sample processing methods on the recovery of the biocontrol agent Pantoea agglomerans CPA-2 from different fruit surfaces

138

Influence of diluent compositions on the porous structure of methacrylate derivatives of aromatic diols and divinylbenzene

139

Influence of diluent on amine extraction of pyruvic acid using Alamine system

140

Influence of dilute acid and alkali pretreatment on reducing sugar production from corncobs by crude enzymatic method: A comparative study

141

Influence of dilute silicon addition on the oxidation resistance and tensile properties of modified Zircaloy-4

142

Influence of dilution on the strong first-order phase transition of the 3D 4-state Potts model Original Research Article

143

Influence of dilution on the thermophysical properties of Dax peloid (TERDAX®)

144

Influence of dimensional stability of impression materials on the probability of acceptance of a prosthetic restoration

145

Influence of dimethyl formamide pulping of bagasse on pulp properties

146

Influence of dimethyl formamide pulping of wheat straw on cellulose degradation and comparison with Kraft process

147

Influence of Dimethyl Sulfoxide as a Penetration Enhancer of Piroxicam Gel Through Biological Skin

148

Influence of Dimilin on a microsporidian infection in the gypsy moth Lymantria dispar (L.) (Lepidoptera: Lymantriidae)

149

Influence of diosgenin structure on the polymerization kinetics of acrylamide: An experimental and theoretical approach

150

Influence of Dioxin and Metal-Contaminated Sediment on Phase I and II Biotransformation Enzymes in Silver Crucian Carp

151

Influence of dipalmitoylphosphatidylcholine on the dissolution of Brazilian chrysotile

152

Influence of dip-coated boron nitride interphase on mechanical and dielectric properties of SiCf/SiC composites

153

Influence of diphenyliodonium hexafluorophosphate on the bond strength and mechanical properties of model resin cements

154

Influence of dipicolinate ligands on the spectroscopic properties of europium(III) in solution

155

Influence of dipolar interactions on the conduction mechanism of Li+-β-alumina: Molecular Dynamics study

156

Influence of dipole moments on light-emitting features of cardo-type 1H-pyrazolo[3,4-b]quinolines

157

Influence of dipping on thin-layer drying characteristics of seedless grapes

158

Influence of direct and delayed chilling of excised female buffalo muscles on their textural quality

159

Influence of direct current plasma magnetron sputtering parameters on the material characteristics of polycrystalline copper films

160

Influence of direct referrals on time to diagnosis after an abnormal breast screening result

161

Influence of directional strength-to-stiffness on the elastic–plastic transition of fcc polycrystals under uniaxial tensile loading Original Research Article

162

Influence of disbond on notch crack behaviour in single bonded lap joints

163

Influence of discard mineral matter on slag–liquid formation and ash melting properties of coal – A FACTSAGETM simulation study

164

Influence of discharge conditions on the charge decay characteristics

165

Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature

166

Influence of discretization in image space on Hough transform

167

Influence of discretization in image space on Hough transform

168

Influence of discrimination awareness on the occupational interests of African American children

169

Influence of discrimination awareness on the occupational interests of African American children

170

Influence of disease burden, public perception, and other factors on new vaccine development, implementation, and continued use

171

Influence of disinfectants on domestic wastewater treatment plant performance

172

Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations Original Research Article

173

Influence of dislocation glide on the spinodal decomposition of fatigued duplex stainless steels

174

Influence of dislocation networks on the relaxation peaks at intermediate temperature in pure metals and metallic alloys

175

Influence of dislocation on interaction between a crack and a circular inhomogeneity

176

Influence of dislocation stress field on distribution of quantum dots

177

Influence of disorder in crystal structure on ferroelectric phase transitions

178

Influence of disorder on electrical transport and magnetic properties of HCl-doped polyaniline pellets

179

Influence of disorder on electronic structure and magnetic properties in Fe-rich Fe–Si alloys

180

Influence of disorder on microcavity polariton linewidths

181

Influence of disorder on the magnetic properties of FeAl alloys: theory

182

Influence of disorder on the rupture process of fibrous materials

183

Influence of disorders on the focusing property of photonic quasicrystal slab

184

Influence of dispersal, stochasticity, and an Allee effect on the persistence of weed biocontrol introductions

185

Influence of dispersal, stochasticity, and an Allee effect on the persistence of weed biocontrol introductions

186

Influence of dispersant on bound water content in coal–water slurry and its quantitative determination

187

Influence of dispersant on powders dispersion and properties of zirconia green compacts

188

Influence of dispersant on the morphology of silica-coated cobalt nanoparticles synthesized by a wet based method

189

Influence of dispersant on Y2O3: Eu3+ powders synthesized by combustion method

190

Influence of dispersant size on rheology of non-aqueous ceramic particle suspensions

191

Influence of dispersant structure and mixing speed on concrete slump retention

192

Influence of dispersant structure on the rheological properties of highly-concentrated zirconia dispersions

193

Influence of dispersant, storage time and temperature on the rheological properties of zirconia–paraffin feedstocks for LPIM

194

Influence of dispersants on bioconcentration factors of seven organic compounds with different lipophilicities and structures

195

Influence of dispersants on the solubility of calcined kaolin

196

Influence of dispersed aerosil particles on the collective dynamic modes in a ferroelectric liquid crystal with polarization sign reversal

197

Influence of dispersed particles on small and large deformation properties of concentrated caseinate composites

198

Influence of dispersibility and coagulation on the dust explosion risk presented by powders consisting of nm-particles

199

Influence of dispersion conditions of two pharmaceutical grade clays on their interaction with some tetracyclines

200

Influence of dispersion forces on phase equilibria between thin liquid films and their vapour

201

Influence of dispersion in myosin filament orientation and anisotropic filament contractions in smooth muscle

202

Influence of dispersion of multi-walled carbon nanotubes on the electrochemical performance of PEDOT–PSS films

203

Influence of Dispersion on Transport of Tracer through Unsaturated Porous Media

204

Influence of dispersion solvent for catalyst ink containing sulfonated poly(ether ether ketone) on cathode behaviour in a direct methanol fuel cell

205

Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites Original Research Article

206

Influence of disposal configurations on hydrogeological behaviour of sulphidic paste tailings: A field experimental study

207

Influence of disposal depth on the size of CO2 droplets produced from a circular orifice

208

Influence of dissolution on the mechanical behaviour of saturated deep argillaceous rocks

209

Influence of dissolved air on the effectiveness of cyclic backwashing in submerged membrane systems

210

Influence of Dissolved Carbon Dioxide on the Growth of Spoilage Bacteria

211

Influence of dissolved gas and temperature on the light yield of new liquid scintillators

212

Influence of dissolved gas and temperature on the light yield of new liquid scintillators

213

Influence of dissolved humic substances on the leaching of MCPA in a soil column experiment

214

Influence of dissolved hydrogen on recrystallization and recovery of mechanical properties of deformed palladium

215

Influence of dissolved hydrogen on the fatigue crack growth behaviour of AISI 4140 steel

216

Influence of dissolved organic carbon content on modelling natural organic matter acid–base properties

217

Influence of dissolved organic carbon source, photocatalyst identity and copper(II) ions on the formation of bromoform in irradiated titanium dioxide suspensions

218

Influence of dissolved organic matter in natural and simulated water on the photochemical decomposition of butylparaben

219

Influence of dissolved organic matter on estrone removal by NF membranes and the role of their structures

220

Influence of dissolved organic matter on particle-water interactions of Co, Cu and Cd under estuarine conditions

221

Influence of dissolved oxygen on Fe(II) and Fe(III) sorption onto chitosan

222

Influence of dissolved oxygen tension and agitation speed on alginate production and its molecular weight in cultures of Azotobacter vinelandii☆

223

Influence of dissolved silicate on vertical flux of particulate biogenic matter

224

Influence of dissolved solids on the mechanism of freeze–thaw conditioning

225

Influence of distance on the motivation and frequency of household recycling

226

Influence of distributed flow losses and gains on the estimation of transient storage parameters from stream tracer experiments

227

Influence of distributed wind generation and load composition on voltage sags

228

Influence of distribution of oxide contaminants on fatigue behavior in AZ31 Mg alloy recycled by solid-state processing

229

Influence of disturbance and nitrogen addition on plant and soil animal diversity in grassland

230

Influence of disturbance and nitrogen addition on plant and soil animal diversity in grassland

231

Influence of disturbances generated by the nozzle boundary layer on the heat exchange on the cylindrical nose of a body in a hypersonic flow

232

Influence of disturbances in municipal waste incineration plants on catalytic converters

233

Influence of disturbances on the control of PC-mouse, goal-directed arm movements

234

Influence of diuretics on the concentration of proteins and other components of pleural transudates in patients with heart failure

235

Influence of Diurnal Blood Pressure Variations on Target Organ Abnormalities in Adolescents With Mild Essential Hypertension

236

Influence of divalent metal cation Zinc doping on the structural and magnetic characterization of hemataite: α-Fe2O3

237

Influence of divalent metal on the decomposition products of hydrotalcite-like ternary systems MII–Al–Cr (MII = Zn, Cd)

238

Influence of diversionary foods on vole (Microtus montanus and Microtus longicaudus) populations and feeding damage to coniferous tree seedlings

239

Influence of division cone angles between the fuel-rich and the fuel-lean ducts on gas–particle flow and combustion near swirl burners

240

Influence of DLC coating thickness on tribological characteristics under sliding rolling contact condition

241

Influence of d-limonene absorption on the physical properties of refillable PET

242

Influence of DMSO on the electroreductive Ru(bpy)(CO)2Cl2 (bpy = 2,2′-bipyridine) polymer film formation

243

Influence of DNA Binding on the Degradation of Oxidized Histones by the 20S Proteasome

244

Influence of DNA double-strand break rejoining on clonogenic survival and micronucleus yield in human cell lines

245

Influence of DNA End Structure on the Mechanism of Initiation of DNA Unwinding by the Escherichia coli RecBCD and RecBC Helicases

246

Influence of dobutamine or exercise stress on the results of pulsed-wave Doppler assessment of myocardial velocity,

247

Influence of DOC on fouling of a PVDF ultrafiltration membrane modified by nano-sized alumina Original Research Article

248

INFLUENCE OF DOCKING AND DITERY ENERGY ON CARCASS COMPOSITION OF BADGHISIAN SHEEP

249

Influence of Dog-Bone Apex on Shape During Slab Horizontal Rolling Process Original Research Article

250

Influence of dolomite microcrystals on the technological properties of Santa Cruz de Mudela clays used for building ceramics

251

Influence of dolomitization process on the geochemistry of the carbonate and clastic aquifers induced by vertical flow , Kuwait

252

Influence of domain boundaries on polarity of GaN grown on sapphire

253

Influence of domain orientation on the mechanical properties of lead zirconate titanate piezoelectric ceramics

254

Influence of domain switching zones on the fracture toughness of ferroelectrics

255

Influence of Domain-General Abilities and Prior Division Competence on Fifth-Graders’ Fraction Understanding

256

Influence of domestic hot water parameters on the energy consumption of large buildings in Senegal

257

Influence of donor and acceptor substitutions on the extrinsic behaviour of PZT piezoceramics

258

Influence of donor co-doping by niobium or fluorine on the conductivity of Mn doped and Mg doped PZT ceramics

259

Influence of door-to-balloon time on mortality in primary angioplasty results in 3,648 patients in the second national registry of myocardial infarction (NRMI-2)

260

Influence of dopaminergic and serotoninergic genes on working memory in healthy subjects

261

Influence of dopant anions on properties of polypyrrole nanocoated poly(styrene-co-methacrylic acid) particles

262

Influence of dopant concentration on the structure and physical properties of NdimagePbimageMnOimage single crystals

263

Influence of dopant ions on properties of conducting polypyrrole and its electrocatalytic activity towards methanol oxidation

264

Influence of dopant level on structural, optical and magnetic properties of Co-doped anatase TiO2 nanoparticles

265

Influence of dopant size on the junction properties of polyaniline

266

Influence of dopant structure and charge on supercapacitive behavior of polypyrrole electrodes with high mass loading

267

Influence of dopants on atomic migration and void formation in molten Ge2Sb2Te5 under high-amplitude electrical pulse Original Research Article

268

Influence of dopants on the crystallization of borosilicate glass

269

Influence of doped PEDOT:PSS on the performance of polymer solar cells

270

Influence of doped rare earth elements on electronic properties of the R0.25Ca0.75MnO3 systems

271

Influence of doping and buffer layers on Pb(Zr,Ti)O3 thin films derived from inorganic zirconium precursor

272

Influence of doping and heat treatments on carriers mobility in polycrystalline silicon thin films for photovoltaic application

273

Influence of doping anion on electrochemical and physical properties of polyselenienyl thiophene polymer

274

Influence of doping concentration on Ni-induced lateral crystallization of amorphous silicon films

275

Influence of doping level on shift of the absorption edge of gallium nitride films (Burstein-Moss effect)

276

Influence of doping on electronic instabilities in poly(phthalidylidenearylene)s

277

Influence of Doping on K2SO4 Crystal Properties

278

Influence of doping on physical properties of vitreous As2Se3

279

Influence of doping on thermal stability of Si/Si1−xGex/Si heterostructures

280

Influence of doping the pump-chamber material in a flashlamp pumped Er:YAG laser

281

Influence of doping with various cations on electrical conductivity of apatite-type neodymium silicates

282

Influence of dose, dose interval and administration route of recombinant human soluble tumour necrosis factor receptor type I on orthodontic tooth movement in rats

283

INFLUENCE OF DOSE, FREQUENCY, AND DURATION OF INFUSED GONADOTROPIN-RELEASING HORMONE ON SECRETION OF LUTEINIZING HORMONE AND FOLLICLE-STIMULATING HORMONE IN NUTRITIONALLY ANESTROUS BEEF COWS

284

Influence of DOTA Chelators on Radiochemical Purity and Biodistribution of 177Lu- and 90Y-Rituximab in Xenografted Mice

285

Influence of double aging on microstructure and yield strength of AEREX™ 350

286

Influence of double promotion on HDS catalysts prepared by urea-matrix combustion synthesis Original Research Article

287

Influence of double slot suction (injection) into water boundary layer flows over sphere

288

Influence of double-tip scratch and single-tip scratch on nano-scratching process via molecular dynamics simulation

289

Influence of down-regulation of caspase-3 by siRNAs on sodium-butyrate-induced apoptotic cell death of Chinese hamster ovary cells producing thrombopoietin

290

Influence of draft tube cross-sectional geometry on KLa and in jet loop bioreactors (JLB)

291

Influence of drainage from old mine deposits on benthic macroinvertebrate communities in central Swedish streams

292

Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming

293

Influence of drawbead geometry on sheet metal forming

294

Influence of Dried Lemon, Ginger and Cumin in Weight Reduction and Some Biochemical Parameters in Rats Suffering from Obesity

295

Influence of Drill Dynamics on Bore Quality

296

Influence of drill parameters on bone temperature and necrosis: A FEM modelling and in vitro experiments

297

Influence of drinking water with quebracho tannin on intake of endophyte-infected tall fescue by cattle

298

Influence of drip and furrow irrigation systems on nitrogen oxide emissions from a horticultural crop

299

Influence of drip and furrow irrigation systems on nitrogen oxide emissions from a horticultural crop

300

INFLUENCE OF DRIP IRRIGATION OPERATING AND MANAGEMENT USING SOLAR PHOTOVOLTAIC WATER PUMPING ON STRAWBERRY YIELD INSIDE GREENHOUSES

301

Influence of drivers’ comprehension of posted signs on their safety related characteristics

302

Influence of driving cycles on Euro 3 scooter emissions and fuel consumption

303

Influence of driving cycles on unit emissions from passenger cars

304

Influence of driving patterns on life cycle cost and emissions of hybrid and plug-in electric vehicle powertrains

305

Influence of drizzle on Z–M relationships in warm clouds

306

Influence of droplet kinetic energy flux density from fixed spray-plate sprinklers on soil infiltration, runoff and sediment yield

307

Influence of droplet mutual interaction on carbon dioxide capture process in sprays

308

Influence of droplet size on the release of atomic sodium from a burning black liquor droplet in a flat flame

309

Influence of drought and litter age on Collembola communities

310

Influence of drought stress and Chitosan on fatty acid compounds of rapeseed varieties

311

Influence of drought stress on grain composition and cooking attributes of Iranian rice mutants

312

Influence of drought stress on nutritive value of perennial forage legumes

313

Influence of drought stress on photosynthetic characteristics and protective enzymes in plants

314

Influence of drought stress on some traits in five mung bean (Vigna radiata (L.) R. Wilczek) genotypes

315

Influence of drought stress on the cellular ultrastructure and antioxidant system in leaves of drought-tolerant and drought-sensitive apple rootstocks

316

Influence of drought, salt stress and abscisic acid on the resistance of tomato to Botrytis cinerea and Oidium neolycopersici

317

Influence of drug polarity upon the solid-state structure and release properties of self-emulsifying drug delivery systems in relation with water affinity

318

INFLUENCE OF DRUM CHIPPER SETTING ON THE WOOD CHIPS PERFORMANCE

319

Influence of dry and humid gaseous atmosphere on the thermal decomposition of calcium chloride and its impact on the remove of heavy metals by chlorination

320

Influence of dry and wet ball milling on dispersion characteristics of the multi-walled carbon nanotubes in aqueous solution with and without surfactant

321

Influence of dry and wet curing conditions on compressive strength of silica fume concrete

322

Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill

323

Influence of dry- and wet-milling processes on physicochemical properties, syneresis, pasting profile and microbial count of job’s tear flour

324

Influence of dry density and water content on the swelling of a compacted bentonite

325

Influence of dry grinding in a ball mill on the length of multiwalled carbon nanotubes and their dispersion and percolation behaviour in melt mixed polycarbonate composites

326

Influence of dry grinding on talc and kaolinite morphology: inhibition of nano-bubble formation and improved dispersion

327

Influence of dry heat treatment of canola meal on site and extent of nutrient disappearance in ruminants

328

Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools

329

Influence of dryer type on the performance of a biomass gasification combined cycle co-located with an integrated pulp and paper mill

330

Influence of drying and ageing on the stabilization of earthworm (Lumbricidae) casts

331

Influence of drying and cooking process on the phytochemical content, antioxidant and hypoglycaemic properties of two bell Capsicum annum L. cultivars

332

Influence of Drying and Extraction Methods on Yield and Chemical Composition of the Essential Oil of Eucalyptus sargentii

333

Influence of drying and extraction methods on yield and chemical composition of the essential oil of Satureja hortensis

334

Influence of drying and HEMA treatment on dentin wettability

335

Influence of drying and hydrothermal treatment of corn on the denaturation of salt-soluble proteins and color parameters Original Research Article

336

Influence of drying and water supplying after drying on tensile strength of cement mortar Original Research Article

337

Influence of drying conditions on the effective moisture diffusivity and energy requirements during the drying of pretreated and untreated pumpkin

338

Influence of drying conditions on the effective moisture diffusivity, energy of activation and energy consumption during the thin-layer drying of berberis fruit (Berberidaceae)

339

Influence of drying method and rehydration time on sensory evaluation of rehydrated carrot particulates Original Research Article

340

Influence of drying method on morphology and properties of asymmetric cellulose hollow fiber membrane

341

Influence of drying method on steviol glycosides and antioxidants in Stevia rebaudiana leaves

342

Influence of drying methods on drying of bell-pepper (Capsicum annuum) Original Research Article

343

Influence of drying on the content of sugars in wet processed green Arabica coffees

344

Influence of drying process on the biomass-based polygeneration system of bioethanol, power and heat

345

Influence of drying temperature and duration on fiber properties of unbleached wheat straw pulp

346

Influence of drying temperature on functional properties of wet-milled starch granules

347

Influence of drying temperature on functional properties of wet-milled starch granules

348

INFLUENCE OF DRYING TEMPERATURE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF RUBBERWOOD

349

Influence of drying temperature on the solubility, the purity of isolates and the electrophoretic patterns of corn proteins

350

Influence of drying temperature on the spaghetti cooking quality Original Research Article

351

Influence of drying temperature on the wet-milling performance and the proteins solubility indexes of corn kernels Original Research Article

352

Influence of drying time and temperature on bond strength of contemporary adhesives to dentine

353

Influence of drying time and temperature on bond strength of contemporary adhesives to dentine

354

Influence of drying treatment to electrochemically roughened Ag substrates on the corresponding surface-enhanced Raman scattering performances

355

Influence of dry–wet cycles on the interrelationship between aggregate, particulate organic matter, and microbial community dynamics

356

Influence of dry–wet cycles on the interrelationship between aggregate, particulate organic matter, and microbial community dynamics

357

Influence of DT fuel composition on the energy output and its implications on reactor safety and environmental acceptability

358

Influence of duct aspect ratio on heat/mass transfer in coolant passages with rotation

359

Influence of ductile damage on the bending behaviour of aluminium alloy thin sheets

360

Influence of duodenal infusion of L-methionine and L-methionine-dl-sulfoxide on amino acid concentration and duodenal electrical activity in Friesian calves

361

Influence of duration of supplementation with ruminally protected linseed oil on the fatty acid composition of feedlot lambs

362

Influence of duration of thermal comfort provision on heating behavior of buildings

363

Influence of dust composition on cloud droplet formation

364

Influence of dust mass distributions on generalized Jeans-Buneman instabilities in dusty plasmas

365

Influence of dust on the dynamics of the martian atmosphere above the first scale height

366

Influence of dust pollution on power frequency discharges in rod gaps placed in parallel with insulating spacer

367

Influence of dust shape and material composition on the solar F-corona

368

Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni–CeO2 nanocomposite coating

369

Influence of dwell time on fatigue crack growth in nickel-base superalloys

370

Influence of dwell time on fatigue crack growth in nickel-base superalloys

371

Influence of dwell time on fatigue crack growth in nickel-base superalloys

372

Influence of Dy content on the structure and giant magnetoresistance of Dyx(Co40Ag60)100−x granular films

373

Influence of dye chemistry and electrolyte solution on interfacial processes at nanostructured ZnO in dye-sensitized solar cells

374

Influence of dyes, salts and auxiliary chemicals on the nanofiltration of reactive dye baths: experimental observations and model verification Original Research Article

375

Influence of Dynamic and Static Interference on the Internal Flow and Vibration and Noise Characteristics of Marine Centrifugal Pump

376

Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation

377

Influence of dynamic conditions on aerosol enrichment factor in the coastal area

378

Influence of dynamic densification on nanostructure formation in Ti5Si3 intermetallic alloy and its bulk properties

379

Influence of dynamic densification on nanostructure formation in Ti5Si3 intermetallic alloy and its bulk properties

380

Influence of dynamic environment with different airflows on human performance

381

Influence of dynamic sodium environment on the creep–fatigue behaviour of Modified 9Cr–1Mo ferritic–martensitic steel

382

Influence of dynamic strain ageing on mixed mode I/III fracture toughness of Armco iron

383

Influence of dynamic strain aging on the deformation behavior during ratcheting of a 316LN stainless steel

384

Influence of dynamic strain aging on the dislocation structure developed in Zircaloy-4 during low-cycle fatigue

385

Influence of dynamic strain aging on the ductile tearing of C–Mn steels: modelling by a local approach method

386

Influence of dynamic strain aging pre-treatment on creep-fatigue behavior in 316L stainless steel

387

Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr–1Mo steel

388

Influence of dynamic tortuosity and compressibility on the propagation of transient waves in porous media

389

Influence of dynamical noise on time series generated by nonlinear maps

390

Influence of dysphoria on positive and negative cognitive reactivity to daily mood fluctuations

391

Influence of dysprosium doping on the electrical and optical properties of CdO thin films

392

Influence of dysprosium oxide doping on thermophysical properties of LaMgAl11O19 ceramics

393

Influence of e+e− pair creation in collision of laser and high energy photons for photon-photon colliders

394

Influence of e+e− pair creation in collision of laser and high energy photons for photon-photon colliders

395

Influence of E1-Deleted Recombinant Adenoviruses on B7.1 and IL-2 Expression in C1498 Cells

396

Influence of early colour degradation of asphalt pavements on their thermal behaviour

397

Influence of early diagenesis on the vertical distribution of metal forms in sediments of Bohai Bay, China

398

Influence of early pH decline on calpain activity in porcine muscle

399

Influence of early prehospital thrombolysis on mortality and event-free survival (The Myocardial Infarction Triage and Intervention [MITI] Randomized Trial)

400

Influence of early stages of arbuscular mycorrhiza on uptake of zinc and phosphorus by red clover from a low-phosphorus soil amended with zinc and phosphorus

401

Influence of early strike-slip deformation on subsequent perpendicular shortening: An experimental approach

402

Influence of earlywood–latewood size and isotope differences on long-term tree-ring δ13C trends

403

Influence of earth connection on the operation of railway track circuits

404

Influence of Earth rotation on continental motions

405

Influence of Earth’s shadowing effects on space debris stability Original Research Article

406

Influence of earthquake source parameters and damping on elastic response spectra for Iranian earthquakes

407

Influence of earthquakes on the stability of slopes

408

Influence of earthworm activity and rice straw application on the soil microbial community structure analyzed by PLFA pattern

409

Influence of earthworm activity on aggregate-associated carbon and nitrogen dynamics differs with agroecosystem management

410

Influence of earthworm activity on aggregate-associated carbon and nitrogen dynamics differs with agroecosystem management

411

Influence of earthworm activity on the abundance of collembola in soil

412

Influence of earthworm invasion on soil microbial biomass and activity in a northern hardwood forest

413

Influence of earthworm invasion on soil microbial biomass and activity in a northern hardwood forest

414

Influence of earthworms on soil properties and grass production in reclaimed cutover peat

415

Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/aromatic-ester) copolymers for biomedical applications

416

Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy

417

Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy Original Research Article

418

Influence of ECAP processing parameters on texture and microstructure of commercially pure aluminum

419

Influence of ECAP routes on microstructure and mechanical properties of Mg–Zn–Ca alloy

420

Influence of ECAP routes on the microstructure and properties of pure Ti

421

Influence of ECAP routes on the microstructure and properties of pure Ti

422

Influence of eccentric drawbar force on power delivery efficiency of a wheeled tractor

423

Influence of Echinacea extract pre- or postnatal supplementation on immune and oxidative status of growing rabbits

424

Influence of echocardiographic scan plane location and number on the accuracy of three-dimensional left ventricular volume and shape determination

425

Influence of ECM proteins and their analogs on cells cultured on 2-D hydrogels for cardiac muscle tissue engineering

426

Influence of Eco-Friendly Control Strategies on the Germination of Mycotoxin Secreted Fusarium Verticillioides Infested Maize

427

Influence of ecological factors on the relationship between mfo induction and fish growth: Bridging the gap using neural networks

428

Influence of Economic Constraints on the Shape of Emission Corridors

429

Influence of Economic Indicators over the Lifetime of Agricultural Machinery

430

Influence of economical variables on a supercritical biodiesel production process

431

Influence of ecophysiological factors on growth, lag phase and ochratoxin A production by Aspergillus niger aggregate strains in irradiated corn grains

432

Influence of edge and basal plane sites on the electrochemical behavior of flake-like natural graphite for Li-ion batteries

433

Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints

434

Influence of edge on predator–prey distribution and abundance

435

Influence of Edge Rolling Reduction on Plate-Edge Stress Distribution During Finish Rolling Original Research Article

436

Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates

437

Influence of edge velocity on flame front position and displacement speed in turbulent premixed combustion

438

Influence of edible coatings on postharvest quality of fresh Chinese jujube fruits during refrigerated storage

439

Influence of EDTA and chemical species on arsenic accumulation in Spirodela polyrhiza L. (duckweed)

440

Influence of EDTA and Phosphorus Levels on Dry Matter Yield and Metals Relationships of Maize Root and Shoot in a Lead-Polluted Calcareous Soil

441

Influence of EDTA concentration on the structure and properties of SnS films prepared by electro-deposition

442

Influence of EDTA on the electrochemical behavior of phenols

443

Influence of EDTA2− on the hydrothermal synthesis of CdTe nanocrystallites

444

Influence of education and knowledge on perceptions and practices to control malaria in Southeast Nigeria

445

Influence of Education and Socio-Economic Factors on Stage of Cancer Diagnosis: A Study in Pakistani Population

446

INFLUENCE OF EDUCATION ON DEPOPULATION OF VILLAGE

447

Influence of Education on Oro-dental Knowledge among School Hygiene Instructors

448

Influence of Education on Risk of Hysterectomy before Age 45 Years

449

Influence of education on the benton visual retention test performance as mediated by a strategic search component

450

Influence of education on the pattern of cognitive deterioration in AD patients: The cognitive reserve hypothesis

451

Influence of effective mass in modulating size-dependent linear and non-linear polarization of single carrier 2-dimensional anharmonic quantum dots

452

Influence of effective stress intensity factor range on mixed mode fatigue crack propagation

453

Influence of effector molecules on the CD8+ T cell response to infection

454

Influence of effluent discharge on developing seaweed in semi-natural aquatic environments

455

Influence of Effluent Discharge on Water Quality and Level for Chalk Aquifer in Hampshire, South-East England

456

Influence of egg lipids and fatty acids on egg viability, and their utilization during embryonic development of spotted wolf-fish, Anarhichas minor Olafsen

457

Influence of egg type, pressure and mode of incorporation on density and bubble distribution of a lady finger batter Original Research Article

458

Influence of EGR and oxygen-enriched air on diesel engine NO–Smoke emission and combustion characteristic

459

Influence of EGR unequal distribution from cylinder to cylinder on NOx–PM trade-off of a HSDI automotive Diesel engine

460

Influence of Ejaculation Time on Sperm Quality Parameters in High Performance Boars

461

Influence of ejection angle on residual stress and optical properties of sputtering Ta2O5 thin films

462

Influence of ejection fraction on hospital mortality, morbidity, and costs for CABG patients

463

Influence of El Niٌo and Indian Ocean Dipole on sea level variability in the Bay of Bengal

464

Influence of elaiosome on postdispersal dynamics of an ant-dispersed plant

465

Influence of elastic gradient profiles on dynamically loaded functionally graded materials: cracks along the gradient

466

Influence of elastic modulus on stress redistribution and cracking in repair patches

467

Influence of elastic properties on superplasticity in doped yttria-stabilized zirconia Original Research Article

468

Influence of elastic strains on the adsorption process in porous materials. Thermodynamics and experiment

469

Influence of elastic variations on crack initiation in functionally graded glass-filled epoxy

470

Influence of elbow curvature on flow structure at elbow outlet under high Reynolds number condition

471

Influence of elderberry and blackcurrant concentrates on the growth of microorganisms

472

Influence of electric current density on the bactericidal effectiveness of pulsed electric field treatments Original Research Article

473

Influence of electric current on diffusionally accommodated sliding at hetero-interfaces Original Research Article

474

Influence of electric field and emission current on the configuration of nanotubes in carbon nanotube layers Original Research Article

475

Influence of electric field on laser damage properties of DLC films by unbalanced magnetron sputtering

476

Influence of electric field on photoluminescence of lanthanide-doped nematic liquid crystal

477

Influence of electric field on single gas-bubble growth and detachment in microgravity

478

INFLUENCE OF ELECTRIC FIELD PROFILE AND POLARITY ON THE MODE OF EHDA RELATED TO ELECTRIC DISCHARGE REGIMES

479

Influence of electric field type on the assembly of single walled carbon nanotubes

480

Influence of electric fields on magnetization of achiral carbon tori

481

Influence of electric fields on the fracture of ferroelectric ceramics

482

Influence of electric fields on the structure of chitosan edible coatings

483

Influence of electric potentials on the tribological behaviour of silicon carbide

484

Influence of electrical characteristics on the sensitivity of p-InP-based pseudo-Schottky diodes for NO2 monitoring in atmosphere

485

Influence of electrical conductivity on the phytoremediation of contaminated soils to Cd 2+ and Zn 2+

486

Influence of electrical contacts on charge collection profiles in CdZnTe studied by IBIC

487

Influence of electrical contacts on charge collection profiles in CdZnTe studied by IBIC

488

Influence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide

489

Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides

490

Influence of electrical discharge machining on tribological behavior of ZrO2–TiN composites

491

Influence of electrical discharged machining and surface defects on the fatigue strength of electrodeposited nanocrystalline Ni

492

Influence of electrical stimulation on calpain and ubiquitin-proteasome systems in the denervated and unloaded rat tibialis anterior muscles

493

Influence of electrically conductive polymers on the operating parameters of lead/acid batteries

494

Influence of electro-acupuncture on bone mineral density, bone strength and ultrastructure in ovariectomized rats

495

Influence of electro-acupuncture on pain threshold in horses and its mode of action

496

Influence of electro-beam irradiation on PTC/NTC behaviors of carbon blacks/HDPE conducting polymer composites

497

Influence of electrochemical deposition parameters on the performance of poly-3-methyl thiophene and polyaniline sensors for virgin olive oils

498

Influence of electrochemical doping on low frequency noise of conducting poly(3-methylthiophene) film

499

Influence of Electrochemical Parameters on the Etching of Macropores in Silicon

500

Influence of electro-co-deposition parameters on nano-TiO2 inclusion into nickel matrix and properties characterization of nanocomposite coatings obtained

501

Influence of electrode contacts on conductivity measurements of thin YSZ electrolyte films and the impact on solid oxide fuel cells

502

Influence of electrode layout on performance of insulated surface discharge: modelling by use of PSpice

503

Influence of electrode material on the electrocoagulation

504

Influence of electrode materials on open-circuit voltage profiles with a temperature difference for a thermocell using a Br2/Br−-redox reaction

505

Influence of electrode mismatch on Cole parameter estimation from Total Right Side Electrical Bioimpedance Spectroscopy measurements

506

Influence of electrode misplacement on the electrocardiographic signs of inferior myocardial ischemia

507

Influence of electrode on electrical conduction of ZincPhthalocyanine (ZnPc) thin films

508

Influence of electrode pretreatment, counter anions and additives on the electropolymerization of pyrrole in aqueous solutions

509

Influence of electrode structure on the performance of a direct methanol fuel cell

510

Influence of electrodeposition conditions on the microstructure and corrosion resistance of Zn–Ni alloy coatings from a deep eutectic solvent

511

Influence of Electrodeposition Method, Solvent and Nanoparticle Concentration on Polypyrrole Coatings for Corrosion Protection of Mild Steel

512

Influence of electrodeposition parameters of Ni–W on Ni cathode for alkaline water electrolyser

513

Influence of electrodeposition parameters on the characteristics of NiMoP film

514

Influence of electrodeposition parameters on the deposition rate and microhardness of nanocrystalline Ni coatings

515

Influence of electrodeposition potential on composition and ion exchange of polypyrrole films in aqueous hexafluoroaluminate featured by EQCM molar mass to charge factors

516

Influence of electrodes ageing on the properties of the gas sensors based on SnO2

517

Influence of electroformation charge capacity on the mechanism of charge/discharge process for positive electrode in lead–acid cells

518

Influence of electroless nickel plating on I–V characteristics and its implications for reliability in ZnO-based ceramic varistors

519

Influence of Electrolyte Composition and Voltage on the Microstructure and Growth Mechanism of Plasma Electrolytic Oxidation (PEO) Coatings on Tantalum: A Review

520

Influence of electrolyte composition on the electroosmotic flow and electrophoretic mobility of proteins and peptides

521

Influence of Electrolyte Concentration on Copying Accuracy of Precision-ECM

522

Influence of electrolyte concentration on microchannel oil-in-water emulsification using differently charged surfactants

523

Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy

524

Influence of electrolyte ion adsorption on the derivative of potentiometric titration curve of oxide suspension – theoretical analysis

525

Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys

526

Influence of electrolyte on the photovoltaic performance of a dye-sensitized TiO2 solar cell based on a Ru(II) terpyridyl complex photosensitizer

527

Influence of electrolyte temperature on properties and infrared emissivity of MAO ceramic coating on 6061 aluminum alloy

528

Influence of electrolytes on the heat-induced swelling of aqueous dispersions of native wheat starch granules

529

Influence of electrolytes on the photovoltaic performance of organic dye-sensitized nanocrystalline TiO2 solar cells

530

Influence of electromagnetic brake on flow field of liquid steel in the slab continuous casting mold

531

Influence of Electromagnetic Fields and Protective Effect of CAPE on Bone Mineral Density in Rats

532

Influence of Electromagnetic Fields of Two Phases Square Wave with Low Frequency on Serum Alt and Ast Levels and Histochemistry of Hepatocytesʹ Glycogen

533

Influence of Electromagnetic Fields on Lead Toxicity: A Study of Conformational Changes in Human Blood Proteins

534

Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder

535

Influence of electron beam and ultraviolet ozone irradiation on blue-emission properties of C60-coupled porous silicon

536

Influence of electron beam halos on the FEL performance

537

Influence of electron beam halos on the FEL performance

538

Influence of electron capture after-effects on the stability of 111In(111Cd)-complexes with organic ligands Original Research Article

539

Influence of electron concentration and temperature on fullerene formation in a carbon plasma Original Research Article

540

Influence of electron cooler on dipole ion oscillations in high-current storage ring

541

Influence of electron cooler on dipole ion oscillations in high-current storage ring

542

Influence of electron diffraction on measured energy-resolved momentum densities in single-crystalline silicon Original Research Article

543

Influence of electron donor, oxygen, and redox potential on bacterial perchlorate degradation

544

Influence of electron donors on the growth and activity of sulfate-reducing bacteria

545

Influence of electron irradiation on the crystallisation, molecular weight and mechanical properties of poly-(R)-3-hydroxybutyrate

546

Influence of electron irradiation on the electronic properties of microcrystalline silicon

547

Influence of electron irradiation on the mobility and on the mechanical properties of DGEBA/TETA epoxy resins

548

Influence of electron radiation on adhesion of some polymer films to acrylic adhesives

549

Influence of electron structure on the corrosional resistance of iron-based solid solutions in aggressive media.

550

Influence of electron-beam irradiation on electric parameters of dielectric materials

551

Influence of electron-beam irradiation on thermal stabilization process of polyacrylonitrile fibers

552

Influence of electron-beam parameters on the radiation-induced formation of graphitic onions

553

Influence of electron-beam parameters on the radiation-induced formation of graphitic onions

554

Influence of electron-beam radiation on the hydrolytic degradation behaviour of poly(lactide-co-glycolide) (PLGA)

555

Influence of electronic and ionic processes on electrical properties of TlBr crystals

556

Influence of electronic and ionic processes on electrical properties of TlBr crystals

557

Influence of electronic and steric effects on stability constants and electrochemical reversibility of divalent ion complexes with glycine and sarcosine: A glass electrode potentiometric, sampled direct current polarographic, virtual potentiometric, and m

558

Influence of electronic and steric factors on 2,3-dihydroimidazo[1,2-a]pyridine-based enantioselective acylation catalysts

559

Influence of electronic antifouling on agglomeration of calcium carbonate

560

Influence of Electronic Procurement Strategy on Value For Money In Construction Project

561

Influence of electronic state of rhodium in supported bimetallic catalysts on catalytic activity and selectivity in carbon monoxide hydrogenation reactions

562

Influence of electronic stopping on amorphization energies

563

Influence of electronic stopping power on the total neutron yield of energetic heavy ions

564

Influence of electronic stopping power on the total neutron yield of energetic heavy ions

565

Influence of electron–phonon interaction on soliton mediated spin–charge conversion effects in two-component polymer model Original Research Article

566

Influence of electron-withdrawing and electron-donating substituents on photophysical properties of azaphthalocyanines

567

Influence of Electroplating Parameters on Microstructure and Amount of Ceramic Particle Deposition in Ni-Co-CeO_2 Composite Coating

568

Influence of electropolishing and anodic oxidation on morphology, chemical composition and corrosion resistance of niobium

569

Influence of electropolishing current densities on sulfur generation at niobium surface

570

Influence of electropulsing globularization on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with lamellar microstructure

571

Influence of Electropulsing Pretreatment on Solid-State Graphitization of Spherical Graphite Iron Original Research Article

572

Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg–9Al–1Zn alloy strip

573

Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy

574

Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3−δ films for SOFCs

575

Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3−δ films for SOFCs

576

Influence of electrospun collagen on wound contraction of engineered skin substitutes

577

Influence of electrospun fiber size on the separation efficiency of thin film nanofiltration composite membrane

578

Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates

579

Influence of electrostatic interactions in electrophoretic membrane contactors Original Research Article

580

Influence of electrostatic interactions on the rejection with NF and assessment of the removal efficiency during NF/GAC treatment of pharmaceutically active compounds in surface water

581

Influence of element Re on deformation mechanism within γ′ phase of single crystal nickel-based superalloys during creep at elevated temperatures

582

Influence of element Re on lattice misfits and stress rupture properties of single crystal nickel-based superalloys

583

Influence of elemental composition on crystal structure and hydrogen storage performance for Mg-containing alloys

584

Influence of Elemental Sulfur and Sulfur Oxidizing Bacteria on Some Nutrient Deficiency in Calcareous Soils

585

Influence of elemental sulfur on the de-novo-synthesis of organochlorine compounds from residual carbon on fly ash

586

Influence of elemental sulfur, micronutrients, phosphorus, calcium, magnesium and potassium on growth of Prosopis alba on high pH soils in Argentina

587

INFLUENCE OF ELEMENTS FOR CLOSING OF THE HALLS POULTRY PERFORMANCE PRODUCTIVE

588

Influence of elevated atmospheric CO2 and water availability on soil fungal communities under Eucalyptus saligna

589

Influence of elevated atmospheric CO2 and water availability on soil fungal communities under Eucalyptus saligna

590

Influence of elevated CO2, nitrogen, and Pinus elliottii genotypes on performance of the redheaded pine sawfly, Neodiprion lecontei

591

Influence of elevated concentrations of atmospheric CO2 on CH4 and CO2 entrapped in rice-paddy soil

592

Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash

593

Influence of elevated temperatures on the cyclic deformation behaviour of the magnesium die-cast alloys AZ91D and MRI 230D

594

Influence of elevated temperatures on the immune response of abalone, Haliotis rubra

595

Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete

596

Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates

597

Influence of elevation modelling on hydrodynamic simulations of a tidally-dominated estuary

598

Influence of elicitors on taxane production and 3-hydroxy-3-methylglutaryl coenzyme A reductase activity in Taxus media cells

599

Influence of Ellagic Acid and Ebselen on Sperm and Oxidative Stress Parameters during Liquid Preservation of Ram Semen

600

Influence of Ellipsoidal Dimple Column Number on Performance of Highly-loaded Compressor Cascade

601

Influence of ELMs on operation of ICRF antennas in ASDEX Upgrade

602

Influence of elongational flow on phase separated inclusions within gelling biopolymer drops

603

Influence of embedded particles on microstructure, corrosion resistance and thermal conductivity of CuO/SiO2 and NiO/SiO2 nanocomposite coatings

604

Influence of embedding parameters and noise in center of pressure recurrence quantification analysis

605

Influence of embossing and restoration on the mechanical properties of aluminum alloy sheets

606

Influence of Embryonic Cardiomyocyte Transplantation on the Progression of Heart Failure in a Rat Model of Extensive Myocardial Infarction

607

Influence of emission and transportation characteristics on chemical cloud water composition at Mt. Brocken (Germany)

608

Influence of emission input data on ozone level predictions for the upper rhine valley

609

Influence of emission-factor uncertainty and farm-characteristic variability in LCA estimates of environmental impacts of French dairy farms

610

Influence of emitter bandgap on interdigitated point contact back heterojunction (a-Si:H/c-Si) solar cell performance

611

Influence of emotional arousal on the N150 of the Auditory Evoked Potential from the rat amygdala

612

Influence of Emotional Expression on Memory Recognition Bias: A Functional Magnetic Resonance Imaging Study

613

Influence of emotional factors on the initial orientation of pigeons

614

Influence of Emotional Intelligence and Gender on Job Performance and Job Satisfaction among Nigerian Policemen

615

Influence of emulsification on the properties of styrene–butadiene–styrene chemically modified bitumens

616

Influence of emulsifier type on freeze-thaw stability of hydrogenated palm oil-in-water emulsions

617

Influence of emulsifier type on gastrointestinal fate of oil-in-water emulsions containing anionic dietary fiber (pectin)

618

Influence of emulsion composition and ultrasonication time on flaxseed oil powder properties

619

Influence of emulsion on crystal growth of hydroxyapatite

620

Influence of enamel border and regional variability on durability of resin–dentin bonds

621

Influence of enamel wetness on composite restorations using various dentine bonding agents: Part II—effects on shear bond strength

622

Influence of enamel wetness on resin composite restorations using various dentine bonding agents: Part I—effects on marginal quality and enamel microcrack formation

623

Influence of encapsulation materials on the optical properties and conversion efficiency of heat-sealed flexible polymer solar cells

624

Influence of encapsulation of emulsified lipids with chitosan on their in vivo digestibility

625

Influence of encapsulation on the mechanism of thermal decomposition of hexacyanotransition metal complexes

626

Influence of end constraints on the collapse of axially impacted frusta

627

Influence of end friction confinement on impact tests of concrete material at high strain rate

628

Influence of end-conditions during tube hydroforming of aluminum extrusions

629

Influence of end-conditions during tube hydroforming of aluminum extrusions

630

Influence of end-conditions during tube hydroforming of aluminum extrusions

631

Influence of endodontic post type (glass fiber, quartz fiber or gold) and luting material on push-out bond strength to dentin in vitro

632

Influence of endodontic posts on the fracture behavior of crowned premolars with class II cavities

633

Influence of endogenous and exogenous RNases on the variation of pollen cytosolic-free Ca2+ in Pyrus serotina Rehd

634

Influence of Endometriosis on Sexual Satisfaction and Pain Intensity: Does Pain Make a Difference?

635

Influence of endothelial nitric oxide synthase gene polymorphisms (G894T, 4a4b, T-786C) and hyperhomocysteinemia on the predisposition to acute coronary syndromes

636

Influence of Endurance Exercise Overloading Patterns Levels Ventricular Catecholamines After a Bout of Lactate Threshold Test in Male Wistar Rat

637

Influence of Endurance Exercise Overloading Patterns on the Levels of Left Ventricular Catechoamines After a Bout of Lactate Threshold Test in Male Wistar Rat

638

Influence of energetic ion bombardment on W-C:H coatings deposited with W and WC targets

639

Influence of energy and wavelength on femtosecond laser-induced nucleation of protein

640

Influence of energy concentration and feed form of the diet on growth performance and digestive traits of brown egg-laying pullets from 1 to 120 days of age

641

Influence of energy demands ratio on the optimal facility scheme and feasibility of BCHP system

642

Influence of energy density and unit size on portion size estimation

643

Influence of energy intake during late gestation and early post-calving on reproductive performance of beef cattle.

644

Influence of energy levels on the electronic properties of organic light harvesting devices

645

Influence of energy transfer from Ce3+ to Eu2+ on luminescence properties of Ba3Si6O9N4:Ce3+, Eu2+ phosphors

646

Influence of energy transfer on fluorescence and lasing properties of various laser dyes co-doped in ORMOSILs

647

Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel

648

Influence of engineered titania nanotubular surfaces on bone cells

649

Influence of enhanced malate dehydrogenase expression by alfalfa on diversity of rhizobacteria and soil nutrient availability

650

Influence of enhanced malate dehydrogenase expression by alfalfa on diversity of rhizobacteria and soil nutrient availability

651

Influence of enhanced melt supply on upper crustal structure at a mid-ocean ridge discontinuity: A three-dimensional seismic tomographic study of 9°N East Pacific Rise

652

Influence of enhanced UV-B radiation on wheat production in relation with abiotic, biotic and socioeconomics constraints

653

Influence of enological practices on the antioxidant activity of wines

654

Influence of ensiling forages at different dry matters and silage additives on lipid metabolism and fatty acid composition

655

Influence of ENSO variability on sinking-particle fluxes in the northeastern equatorial Pacific

656

Influence of enteral diets supplemented with key nutrients on lymphocyte subpopulations in Peyerʹs patches of endotoxin-boostered mice

657

Influence of enteral versus parenteral nutrition on blood glucose control in acute pancreatitis: A systematic review

658

Influence of enteric nutrition on blood urea nitrogen (BUN) in very old patients with chronic kidney disease (CKD)

659

Influence of entrance channels on the formation of superheavy nuclei in massive fusion reactions Original Research Article

660

Influence of entry duct bends on the performance of return-flow cyclone dust collectors

661

Influence of environment and genotype on polyphenol compounds and in vitro antioxidant capacity of native Andean potatoes (Solanum tuberosum L.)

662

Influence of environment and genotype on polyphenol compounds and in vitro antioxidant capacity of native Andean potatoes (Solanum tuberosum L.)

663

Influence of environment and grinding on the crystallisation mechanism of ZrO2 gel Original Research Article

664

Influence of environment factors on bacterial ingestion rate of the deposit-feeder Hydrobia ulvae and comparison with meiofauna

665

Influence of environment on fatigue mechanisms in high-temperature titanium alloy IMI834

666

Influence of Environment on Glandular Trichomes and Composition of Essential Oil of Perovskia abrotanoides Karel

667

Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys

668

Influence of environment on low cycle fatigue damage in Ti6Al4V and Ti 6246 titanium alloys

669

Influence of environment on seed soluble carbohydrates in selected lentil cultivars

670

Influence of environment on seed soluble carbohydrates in selected lentil cultivars

671

Influence of environment on the excited state deactivation in functionalized quinquethienyl in solution

672

Influence of environment on the mechanical behaviour of mature human enamel

673

Influence of environment on walleye pollock eggs, larvae, and juveniles in the southeastern Bering Sea

674

Influence of Environment, Strategy, and Market Orientation on Performance in Small Manufacturing Firms

675

Influence of Environmental Aging on Properties of Polymeric Mortars

676

Influence of environmental and genetic factors on health-related compounds in strawberry

677

Influence of environmental and genetic factors on the stability of essential oil composition of Thymus pulegioides

678

Influence of environmental and nutritional factors in the production of astaxanthin from Haematococcus pluvialis

679

Influence of environmental and nutritional factors on succinic acid production and enzymes of reverse tricarboxylic acid cycle from Enterococcus flavescens

680

Influence of environmental and prey variables on low tide shorebird habitat use within the Robbins Passage wetlands, Northwest Tasmania

681

Influence of environmental conditions and building structure on food quality: A survey of hand-crafted dairies in Northern Italy

682

Influence of environmental conditions on carbonaceous particle concentrations within New Zealand

683

Influence of environmental conditions on dental composite flexural properties

684

Influence of environmental conditions on production of volatiles by Trichoderma atroviride in relation with the sick building syndrome

685

Influence of environmental conditions on the activity of the recombinant mannuronan C-5-epimerase AlgE2

686

Influence of environmental conditions on thermal stability of recombinant Aspergillus aculeatus pectinmethylesterase

687

Influence of environmental enrichment on welfare-related behavioural and physiological parameters in growing pigs

688

Influence of environmental factors on a population of goitred gazelles (Gazella subgutturosa subgutturosaGüldenstaedt, 1780) in semi-wild conditions in an arid environment: a preliminary study

689

Influence of environmental factors on airborne fungi in houses of Santa Fe City, Argentina

690

Influence of Environmental Factors on Distribution of Plant Species in Nodushan Rangelands of Yazd Province (Iran)

691

Influence of environmental factors on energy absorption degradation of polystyrene foam in protective helmets

692

Influence of environmental factors on meal intake in overweight and normal-weight male adolescents. A laboratory study

693

INFLUENCE OF ENVIRONMENTAL FACTORS ON SEED GERMINATION AND SEEDLING EMERGENCE OF YELLOWTOP (Flaveria bidentis)

694

Influence of environmental factors on shot put and hammer throw range

695

Influence of Environmental Factors on Social Participation Post-Stroke

696

Influence of environmental factors on the biosynthesis of type B trichothecenes by isolates of Fusarium spp. from Spanish crops

697

Influence of environmental factors on the sap flux density of mango trees under rain-fed cropping systems in West Africa

698

Influence of environmental factors, wet processing and their interactions on the biochemical composition of green Arabica coffee beans

699

Influence of environmental gradients on C and N stable isotope ratios in coral reef biota of the Red Sea, Saudi Arabia

700

Influence of environmental humidity on plasma etching polyamide 6 films

701

Influence of environmental noises on the Gomatam model of interacting species

702

Influence of environmental noises on the Gomatam model of interacting species

703

Influence of environmental noises on the Gompertz model of two species fishery

704

Influence of environmental noises on the Gompertz model of two species fishery

705

Influence of environmental parameters on production of the acrolein precursor 3-hydroxypropionaldehyde by Lactobacillus reuteri DSMZ 20016 and its accumulation by wine lactobacilli

706

Influence of environmental parameters on the life-history and population dynamics of cuttlefish Sepia officinalis in the western Mediterranean

707

Influence of environmental stimuli on nursing and suckling behaviour in domestic sows and piglets

708

Influence of environmental stresses on stability of O/W emulsions containing droplets stabilized by multilayered membranes produced by a layer-by-layer electrostatic deposition technique

709

Influence of environmental stresses on the stability of W/O/W emulsions containing enzymatically modified starch

710

Influence of environmental temperature and moisture content of aggregates on the workability of cement mortar

711

Influence of environmental temperature on composition of lipids in edible flesh of rainbow trout (Oncorhynchus mykiss)

712

Influence of Environmental Temperature on Postpartum Reproductive Potential of Kundhi Buffaloes

713

Influence of environmental temperature, exercise, semen type and ovulation characteristics on reproductive performance in a commercial embryo transfer program

714

Influence of environmental temperature, exercise, semen type and ovulation characteristics on reproductive performance in a commercial embryo transfer program

715

Influence of environmental temperatures during gestation and at birth on eating characteristics in adolescence: a replication and extension study

716

Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions

717

Influence of environmental variables on the spatio-temporal dynamics of bentho-pelagic assemblages in the middle slope of the Balearic Basin (NW Mediterranean)

718

Influence of enzymatic treatment on the nutritional and functional properties of pea flour

719

Influence of enzyme and chemical adsorption on the thermal degradation path for eucalyptus pulp

720

Influence of Enzyme Levels on the Toxicity and in Vitro Metabolism of 2,2′,5-Trichlorobiphenyl in Houseflies

721

Influence of Enzyme Loading and Physical Parameters on the Enzymatic Hydrolysis of Steam-Pretreated Softwood

722

Influence of enzyme loading on enzymatic hydrolysis of cardboard waste and size distribution of the resulting fiber residue

723

Influence of enzyme supplementation of diets and cooking–flaking of maize on digestive traits and growth performance of broilers from 1 to 21 days of age

724

Influence of enzyme treatment on bioactive compounds and colour stability of betacyanin in flesh and peel of red dragon fruit Hylocereus polyrhizus (Weber) Britton and Rose

725

Influence of Enzyme Type and Hydrolysis Time on Antioxidant Activity of Hydrolyzed Protein from Longtail Tuna (Thunnus tonggol) Dark Muscle

726

Influence of enzymes and plaque acids on in vitro wear of dental composites

727

Influence of enzymes on rheological, microstructure and quality characteristics of parotta - an unleavened Indian flat bread

728

Influence of eotaxin 67G>A polymorphism on plasma eotaxin concentrations in myocardial infarction survivors and healthy controls

729

Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces

730

Influence of EP and AW additives on the tribological behaviour of hard low friction coatings

731

Influence of epicardial adipose tissue and adipocytokine levels on cardiac abnormalities in visceral obesity

732

Influence of Epicardial and Visceral Fat on Left Ventricular Diastolic and Systolic Functions in Patients After Myocardial Infarction

733

Influence of epidermal growth factor and insulin-like growth factor 1 on nuclear maturation and fertilization of buffalo cumulus oocyte complexes in serum free media and their subsequent development in vitro

734

Influence of Epidermal Growth Factor with Cysteamine on in -Vitro Buffalo Embryo Development

735

Influence of Epinephrine Infusion and Transportation Before Slaughter on Proteases Activity in Rabbit Muscles

736

Influence of episode duration of major depressive disorder on response to electroconvulsive therapy

737

Influence of episodic exposures of chlorpyrifos to an estuarine cyprinodontid, Fundulus heteroclitus

738

Influence of epitaxial ferrite on tensile properties of dual phase steel

739

Influence of epitaxial strain on the terrace and inter-layer diffusions in metal epitaxy

740

Influence of epithelial lining fluid lipids on NO2-induced membrane oxidation and nitration

741

Influence of equal channel angular extrusion processing parameters on the microstructure and mechanical properties of Mg–Al–Y–Zn alloy

742

Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy Original Research Article

743

Influence of equal-channel angular pressing on the acoustic emission behaviour of magnesium alloy AZ31 under compression

744

Influence of equiatomic Zr/Nb substitution on superelastic behavior of Ti–Nb–Zr alloy

745

Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation

746

Influence of equi-biaxial residual stress on unloading behaviour of nanoindentation Original Research Article

747

Influence of equinus gait patterns and their treatments on the vertical bodyʹs centre of mass displacement during gait in children with cerebral palsy

748

Influence of equivalent bolt length in finite element modeling of T-stub steel connections

749

Influence of equivalent reactive quartz content on expansion due to alkali silica reaction

750

Influence of Er addition and extrusion temperature on the microstructure and mechanical properties of a Mg–Zn–Zr magnesium alloy

751

Influence of Er substitution for La on the thermal conductivity of (La1−xErx)2Zr2O7 pyrochlores

752

Influence of Er,Cr:YSGG Laser Surface Treatments on Micro Push-Out Bond Strength of Fiber Posts to Composite Resin Core Materials

753

Influence of Er:YAG and Nd:YAG Wavelengths on Laser-Induced Breakdown Spectroscopy Measurements Under Air or Helium Atmosphere

754

Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel

755

Influence of Er:YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths

756

Influence of Er3+ doping on microstructure of oxyfluoride glass–ceramics

757

Influence of Er3+ on the early stages of crystallization of chloro-tellurite glasses studied by XRD and EXAFS

758

Influence of erbia or europia doping on crystal structure and microstructure of ceria–zirconia (CZ) solid solutions

759

Influence of Erbium Addition on the Microstructural Evolution and Tensile Properties of Al/Mg2Si In-Situ Metal Matrix Composites

760

Influence of erosion and deposition on carbon and nitrogen accumulation in resampled steepland soils under pasture in New Zealand

761

Influence of erosion and sedimentation on strike-slip fault systems: insights from analogue models

762

Influence of erroneous learning samples on adaptation in on-line handwriting recognition

763

Influence of erythrocyte aggregation on leukocyte margination in postcapillary expansions: A lattice Boltzmann analysis

764

Influence of Erythropoietin Dose and Albumin Level on the Plasma Brain Natriuretic Peptide in Hemodialysis Patients

765

Influence of Escherichia coli hydrogenases on hydrogen fermentation from glycerol

766

Influence of esophageal carcinoma operations on gastroesophageal reflux

767

Influence of essential onion oil on tin and chromium dissolution from tinplate

768

Influence of esterification and modification of A-ring in a group of lupane acids on their cytotoxicity Original Research Article

769

Influence of estimation method of compression index on spatial distribution of consolidation settlement in Songdo New City

770

Influence of estimation procedure on soil organic carbon stock assessment in Flanders, Belgium

771

Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests

772

Influence of estimators of the vital rates in the stock recovery rate when using matrix models for tropical rainforests

773

Influence of estradiol on adrenal activity in ovariectomized cows during acute stress

774

Influence of estradiol, progesterone, and nutrition on concentrations of gonadotropins and GnRH receptors, and abundance of mRNA for GnRH receptors and gonadotropin subunits in pituitary glands of beef cows

775

Influence of estradiol, stress, and 5-HT2A agonist treatment on Brain-Derived Neurotrophic Factor expression in female rats

776

Influence of estrogen receptor variants on the determination of ER status in human breast cancer

777

Influence of estrogen receptor variants on the determination of ER status in human breast cancer

778

Influence of estrogen therapy at conventional and high doses on the degree of mineralization of iliac bone tissue: a quantitative microradiographic analysis in postmenopausal women

779

Influence of estuarine hypoxia on feeding and sound production by two sympatric pipefish species (Syngnathidae)

780

Influence of etching conditions on apatite fission-track etch pit diameter

781

Influence of etching of polycrystalline Au-, Pt- and glassy carbon surfaces with OH radicals on electrodeposition of metals

782

Influence of ethanol addition in refinery stream fuels and the HCCI combustion

783

Influence of ethanol addition on the modification of montmorillonite by hexadecyl trimethylammonium bromide

784

Influence of ethanol and glycerol concentration over functional and structural properties of zein–oleic acid films

785

Influence of ethanol and pH on the gene expression of the citrate pathway in Oenococcus oeni Original Research Article

786

Influence of ethanol blends on the combustion performance and exhaust emission characteristics of a four-cylinder diesel engine at various engine loads and injection timings

787

Influence of ethanol dose and pigmentation on the incorporation of ethyl glucuronide into rat hair

788

Influence of ethanol in the presence of H2 on the catalytic growth of vertically aligned carbon nanotubes Original Research Article

789

Influence of ethanol on circulation in surface-induced hypothermia and subsequent rewarming

790

Influence of ethanol on lead distribution and biochemical changes in rats exposed to lead

791

Influence of ethanol on the electrocodeposition of Ni/Al2O3 nanocomposite films

792

Influence of ethanol on the high frequency electric polarizability of E. coli Original Research Article

793

Influence of ethanol on the salsolinol excretion in healthy subjects

794

Influence of ethanol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers

795

Influence of ethanol supercritical drying treatment on morphology and electrochemical properties of DyBaCo2O5+δ cathode material

796

Influence of ethanolic extract of Allium sativum on TP53 gene and its anticancer potential in N-Nitrosodiethylamine (NDEA)-induced hepatocellular carcinoma in male albino rats

797

Influence of Ethical Leadership on Innovative Work Behavior: Examination of Individual-Level Psychological Mediators

798

Influence of Ethnicity on the Incidence Rate of Oral Clefts in Northern Iran

799

Influence of ethnocentrism and neo-phobia on ethnic food consumption in Spain

800

Influence of ethoxylate chain length for synperonic NPX surfactants on the film formation behaviour of methylmethacrylate–2-ethylhexyl acrylate copolymer latexes: II. A dielectric investigation

801

Influence of ethyl xanthate on the wettability and surface free energy of galena

802

Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers

803

Influence of ethylene on carbon-catalysed decomposition of methane

804

Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening

805

Influence of ethylene on carotenoid biosynthesis during papaya postharvesting ripening

806

Influence of ethylene-Oxy spacer group on the activity of linezolid: Synthesis of potent antibacterials possessing a thiocarbonyl group

807

Influence of ethylene–propylene ratio on the thermal degradation behaviour of EPDM elastomers

808

Influence of Etiology of Heart Failure on the Obesity Paradox

809

Influence of etiology on ventilatory expired gas and prognosis in heart failure

810

Influence of Eu doping on the microstructure and photoluminescence of CdS nanocrystals

811

Influence of Eu, Dy co-doped strontium aluminate composition on mechanoluminescence intensity

812

Influence of Eu3+ doping content on photoluminescence of Gd2O3:Eu3+ phosphors prepared by liquid-phase reaction method

813

Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation

814

Influence of Eu3+, Bi3+ co-doping content on photoluminescence of YVO4 red phosphors induced by ultraviolet excitation

815

Influence of Eucalyptus globulus plantation growth on water table levels and low flows in a small catchment

816

Influence of European passenger cars weight to exhaust CO2 emissions

817

Influence of europium nanostructure size on the emission of KBr:Eu^{2 + }

818

Influence of eutrophication on the coagulation efficiency in reservoir water

819

Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars

820

Influence of evaporation conditions for BCP and Alq3 on the performance of the PVK:Ir(ppy)3 emitting system

821

Influence of evaporation on spray flamelet structures

822

Influence of evaporation rate on cracks’ formation of a drying drop of whole blood

823

Influence of evaporation–condensation in reactive spreading Original Research Article

824

INFLUENCE OF EVAPORATIVE COOLING SYSTEM ON MICROCLIMATIC CONDITIONS OF A NURSERY SHADED GREENHOUSE

825

Influence of evolving microstructure on magnetic-hysteresis characteristics in polycrystalline nickel–zinc ferrite, Ni0.3Zn0.7Fe2O4

826

Influence of ewe feeding systems on fatty acid composition of suckling lambs

827

Influence of Exceptionally High Salinities, Marked Variations in Freshwater Discharge and Opening of Estuary Mouth on the Characteristics of the Ichthyofauna of a Normally-Closed Estuary

828

Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth

829

Influence of excess silicon on the surface morphology and defect structure during the initial stages of SiC sublimation growth

830

Influence of excessive filler coating on the tensile properties of LDPE–calcium carbonate composites

831

Influence of excessive sludge conditioning on the efficiency of anaerobic stabilization process and biogas generation Original Research Article

832

Influence of exchange cations on the catalytic conversion of limonene over Serra de Dentro (SD) and SAz-1 clays: Correlations between acidity and catalytic activity/selectivity Original Research Article

833

Influence of exchange distortion potential on electron impact excitation of B+

834

Influence of exchangeable cation of smectite on HDTMA adsorption: Equilibrium, kinetic and thermodynamic studies

835

Influence of exchangeable cations on hydraulic conductivity of compacted bentonite

836

Influence of exchangeable cations on the diffusion of neutral diffusants in zeolites of type LTA. An MD study

837

Influence of Excimer Behavior on Photoluminescence and Electroluminescence of a Novel Conjugated Molecule Doped in Polymer

838

Influence of excipients on characteristics and release profiles of poly(ε-caprolactone) microspheres containing immunoglobulin G

839

Influence of excipients on spray-dried powders for inhalation

840

Influence of excitation light wavelength on the photoluminescence properties for ZnO films prepared by magnetron sputtering

841

Influence of Excitation System Control Modes on the Allowable Penetration Level of Distributed Synchronous Generators

842

Influence of excitation wavelength on photoluminescence spectra of Al doped ZnO films

843

Influence of excited electron lifetimes on the electronic structure of carbon nanotubes

844

Influence of excited Landau levels on a two-dimensional electron–hole system in a strong perpendicular magnetic field

845

Influence of exciton transfer on the optical cycle of α-PTCDA

846

Influence of excluded volume on the conformational property of tail-like chain on the simple cubic lattice

847

Influence of exercise training and age on CD14+ cell-surface expression of toll-like receptor 2 and 4

848

Influence of exercise training on blood viscosity in patients with coronary artery disease and impaired left ventricular function, , ,

849

Influence of exfoliating facial cleanser on the bio-tribological properties of human skin

850

Influence of exhaled breath condensates from children with asthma on endothelial cells cultured in vitro. Do we really know everything about our breath condensate?

851

Influence of exhaust gas heating and L/D ratios on the discharge efficiencies for an activated carbon natural gas storage system

852

Influence of exhaustive treadmill exercise on cognitive functioning in chronic fatigue syndrome

853

Influence of exit opening location on mixed convection in a channel with volumetric heat sources

854

Influence of exo β-d-galactofuranosidase inhibitors in cultures of Penicillium fellutanum and modifications in hyphal cell structure Original Research Article

855

Influence of exogenic salicylic acid on Fusarium seedling blight reduction in barley

856

Influence of exogenous application of glutathione on rubisco and rubisco activase in heavy metal-stressed tobacco plant grown in vitro

857

Influence of Exogenous Application of Glycine Betaine on Growth and Ion Accumulation in Strawberry Plants under Saline Condition

858

Influence of exogenous application of some phytoprotectants on growth, yield and pod quality of snap bean under NaCl salinity

859

Influence of exogenous enzyme supplementation on energy utilisation and nutrient digestibility of cereals for broilers

860

Influence of exogenous enzymes ensiled with orange pulp on digestion and growth performance in lambs

861

Influence of exogenous enzymes on nutrient digestibility, extent of ruminal fermentation as well as milk production and composition in dairy cows

862

Influence of exogenous fibrolytic enzyme level and incubation pH on the in vitro ruminal fermentation of alfalfa stems

863

Influence of exogenous fibrolytic enzymes on in vitro and in sacco degradation of forages for ruminants

864

Influence of exogenous iron, calcium, protein and common salt on the bioaccessibility of zinc from cereals and legumes

865

Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach

866

Influence of exogenous organic matter on prokaryotic and eukaryotic microbiota in an agricultural soil. A multidisciplinary approach

867

Influence of exogenous polyamines on antioxidant defence and essential oil production in valerian (Valeriana officinalis L.) plants under drought stress

868

Influence of exogenous progesterone on survival of asynchronously transferred Day-10 horse embryos

869

Influence of exogenous xylanase supplementation on apparent metabolisable energy and amino acid digestibility in wheat for broiler chickens

870

Influence of exonic polymorphisms in the gene for LDL receptor-related protein (LRP) on risk of coronary artery disease

871

Influence of exopolysaccharides on the electrophoretic properties of the model cyanobacterium Synechocystis

872

Influence of expanding ring roads on traffic noise in Beijing City

873

Influence of expansion conditions on the characteristics of cholesterol crystals analyzed by statistical design

874

Influence of expansion volume of intercalated graphite on tensile properties of flexible graphite

875

Influence of Experience on the Response of Bathyplectes curculionis (Hymenoptera: Ichneumonidae), a Nonaphidophagous Parasitoid, to Aphid Odor

876

Influence of experimental conditions and Trp mutations on the stability and the folding characteristics of goat α-lactalbumin

877

Influence of experimental conditions on the extraction of phenolic compounds from parsley (Petroselinum crispum) flakes using a pressurized liquid extractor

878

Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test

879

Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep

880

Influence of experimental inflammatory response on hepatic hepcidin gene expression and plasma iron concentration in sheep

881

Influence of experimental parameter on the Li-content of LiMn2O4 electrodes produced by pulsed laser deposition

882

Influence of experimental parameters on determination of residual stress using the incremental hole-drilling method

883

Influence of experimental parameters on physical properties of porous silicon and oxidized porous silicon layers

884

Influence of experimental parameters on the composition of precipitates in metallic alloys

885

Influence of experimental parameters on the composition of precipitates in metallic alloys

886

Influence of experimental parameters on the fluorescence response and recovery of the high-performance liquid chromatography analysis of fumonisin B1

887

Influence of experimental protocol on activation energy in char gasification: the effect of thermal annealing

888

Influence of experimental resolution on the quantum-to-classical transition in the quartic oscillator

889

Influence of experimental variables on fracture toughness determined on SEVNB in three points bending. Mullite a case study

890

Influence of experimentally elevated testosterone on nest defence in dark-eyed juncos

891

iNFLUENCE OF EXPLANT AND GROWTH REGULATORS IN THE INDUCTION OF CALLUS OF Annona Muricata IN VITRO

892

Influence of Explant Nodal Positions on the In Vitro Shoot Regeneration of Rose

893

Influence of exploitation on population structure, spatial distribution and reproductive success of dioecious species in a fragmented cloud forest in India Original Research Article

894

Influence of explorer tip diameter in identifying restoration margin discrepancies

895

Influence of explosive energy on the strength of the rock fragments and SAG mill throughput

896

Influence of exposure history on vitellogenin induction in medaka: a case of ‘estrogen memory’?

897

Influence of exposure sites on trace element enrichment in moss-bags and characterization of particles deposited on the biomonitor surface Original Research Article

898

Influence of exposure temperature on chloride diffusion in concretes incorporating silica fume or natural zeolite

899

Influence of exposure to aggressive environment on fatigue behavior of a shot peened high strength aluminum alloy

900

Influence of exposure to environmental lead on serum immunoglobulin in preschool children

901

Influence of exposure to pesticides on serum components and enzyme activities of cytotoxicity among intensive agriculture farmers

902

Influence of exposure to phosphoric and polyacrylic acids on selected microscopic and physical/chemical properties of calcium hydroxide cements

903

Influence of expressed emotion and perceived criticism on cognitive-behavioral therapy for social phobia

904

Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods

905

Influence of extended defects and native impurities on external gettering in polycrystalline silicon

906

Influence of extended defects and native impurities on external gettering in polycrystalline silicon

907

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

908

Influence of Extended-Release Nicotinic Acid on Nonesterified Fatty Acid Flux in the Metabolic Syndrome With Atherogenic Dyslipidemia

909

Influence of extensive compressed natural gas (CNG) usage on air quality

910

Influence of external bias on the surface morphology of a-C:H films grown by electron cyclotron resonance chemical vapor deposition

911

Influence of external density fluctuations on parametric 3-wave interaction Original Research Article

912

Influence of external distortions on multifactor optical identification tags with photon-counting

913

Influence of external electric field on relaxor behaviour of (Pb0.75Ba0.25)(Zr0.70Ti0.30)O3 ceramics

914

Influence of external electric field on the polarity of water droplets in water-in-oil emulsion phase transition

915

Influence of external excitations on ball positioning of an automatic balancer

916

Influence of external field and consequent impurity breathing on excitation profile of doped quantum dots

917

Influence of External Fluctuations on a Hypercycle Formed by Two Kinetically Indistinguishable Species

918

Influence of external grounded screens on the electric field structure in a drift chamber

919

Influence of External Magnetic Field on 3D Thermocapillary Convective Flow in Various Thin Annular Pools Filled with Silicon Melt

920

INFLUENCE OF EXTERNAL MAGNETIC FIELD ON A SYMMETRICAL GYROTROPIC SLAB IN TERMS OF GOOS-HÄNCHEN SHIFTS

921

Influence of external perturbations on a minienvironment: experimental investigations

922

Influence of external stress and plastic strain on morphological evolution of precipitates in Ni-based superalloys

923

Influence of external transverse electric and magnetic fields on the absorption of a parabolic quantum wire

924

Influence of external β-irradiation in oxide glasses

925

Influence of external, intrinsic and individual behaviour variables on serum 25(OH)D in a German survey

926

Influence of extra terms on asymptotic analysis of imperfection sensitivity of toroidal shell segment with random imperfection

927

Influence of Extracellular Matrix Overlay on Phenobarbital-Mediated Induction of CYP2B1, 2B2, and 3A1 Genes in Primary Adult Rat Hepatocyte Culture

928

Influence of extracellular matrix proteins on human keratinocyte attachment, proliferation and transfer to a dermal wound model

929

Influence of extractant on quality and trace elements content of peat humic acids

930

Influence of extraction conditions on phenolic yields from pine bark: assessment of procyanidins polymerization degree by thiolysis

931

Influence of extraction methodology on grape composition values

932

Influence of extraction methods on stability of flavonoids

933

INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO

934

INFLUENCE OF EXTRACTION METHODS ON THE YIELD AND CHEMICAL COMPOSITION OF ESSENTIAL OIL OF PLATYCLADUS ORIENTALIS (L.) FRANCO.

935

Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran

936

Influence of extraction methods on total phenolic, flavonoids and antioxidant activity of Thymus kotchyanus L. extract in Semnan Province, Iran

937

Influence of extraction procedures on phenolic content and antioxidant activity of Cretan barberry herb

938

Influence of Extraction Solvents on Cosmos caudatus Leaf Antioxidant Properties

939

Influence of extraction system, production year and area on Cornicabra virgin olive oil: a study of five crop seasons

940

Influence of extraction temperature on the final quality of espresso coffee

941

Influence of extractives on mechanism of biomass pyrolysis

942

Influence of extra-framework Al on the structure of the active iron sites in Fe/ZSM-35

943

Influence of extra-framework cations on the diffusion of alkanes in silicalite: Comparison between quasi-elastic neutron scattering and molecular simulations

944

Influence of extreme head rotations on brainstem auditory evoked potentials (BAEP)

945

Influence of extruder and feedstock variables on torque requirement during pretreatment of different types of biomass – A response surface analysis

946

Influence of extrusion parameters on grain size and texture distributions of AZ31 alloy

947

Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80

948

Influence of extrusion rate and magma rheology on the growth of lava domes: Insights from particle-dynamics modeling

949

Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion

950

Influence of extrusion ratio and temperature on microstructure and mechanical properties of 2024 aluminium alloy consolidated from nanocrystalline alloy powders via hot hydrostatic extrusion

951

Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite

952

Influence of extrusion temperature on the microstructure and the texture of 6061Al–15 vol.% SiCw PM composites

953

Influence of extrusion variables on subsequent saccharification behaviour of sago starch

954

Influence of fabric and mineralogy on the mechanics of dolomitic rocks

955

Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate

956

Influence of Fabrication Conditions on the Electrical Behaviour of Polymer Schottky Diodes

957

Influence of fabrication parameter on the nanostructure and photoluminescence of highly doped p-porous silicon

958

Influence of Fabrication Parameters on Thermo-Mechanical Characteristics of Zea Natural Fiber Reinforced Polymer Composites

959

Influence of fabrication process on the performance of light-emitting diodes

960

Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics

961

Influence of fabrication processing on phase transition and electrical properties of 0.8Pb(Zr1/2Ti1/2)O3–0.2Pb(Ni1/3Nb2/3)O3 ceramics

962

Influence of fabrication stresses on fatigue life of friction stir welded aluminium profiles

963

Influence of Factors in Provision of Networked Services: An Empirical Study in India

964

Influence of factors unrelated to environmental quality on occupant satisfaction in LEED and non-LEED certified buildings

965

Influence of failure mode induced by a horizontally operated single-tip penetrometer on measured soil resistance

966

Influence of Failure Modes on PAH Emission During Lab-Scale Incineration

967

Influence of failure modes on PEFC stack and single cell performance and durability

968

Influence of Falling Height on the Behavior of Skid-Launching Free-Fall Lifeboat in Regular Waves

969

Influence of fallow, wheat and subterranean clover on pH within an initially mixed surface soil in the field

970

Influence of fallowing practices on soil water and precipitation storage efficiency in semiarid Aragon (NE Spain)

971

Influence of family disharmony and parental alcohol use on adolescent social skills, self-efficacy, and alcohol use

972

Influence of family history and lifestyle on blood pressure and heart rate in young adults in Jordan

973

INFLUENCE OF FAMILY RELATED ISSUES ON WORK LIFE BALANCE

974

Influence of Family Structure on the Mental Health and Academic Performance of In-School Adolescents

975

Influence of farm resource endowment on possibilities for sustainable development: A case study for vegetable farms in South Uruguay

976

Influence of Farmers’ Characteristics on Knowledge Gap of Recommended Sugarcane Production Technology in Khyber Pakhtunkhwa, Pakistan

977

Influence of farmers’ socio-economic and technology characteristics on soybean seeds technology adoption in Southern Borno State, Nigeria

978

Influence of farming activities in the Iberian Peninsula on the winter habitat use of common crane (Grus grus) in areas of its traditional migratory routes

979

Influence of farming and feeding systems on composition and quality of goat and sheep milk

980

Influence of farming methods on microbiological contamination and prevalence of resistance to antimicrobial drugs in isolates from beef

981

INFLUENCE OF FARMING SYSTEM, NITROGEN RATES AND METEOROLOGICAL CONDITIONS ON NAKED OAT IN LATVIA

982

Influence of farmyard manure, inorganic fertilizers and weed control practices on some soil physical properties in a long-term experiment

983

Influence of Fasciola hepatica on Serum Biochemical Parameters and Vascular and Biliary System of Sheep Liver.

984

Influence of fast charge on the life cycle of positive lead–acid battery plates

985

Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil

986

Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam

987

Influence of fast secondary electrons on dipole oscillations in a neutralized electron beam

988

Influence of fastener placement on vibration-induced loosening

989

Influence of Fasteners Disposition on Behaviour of Timber-Framed Walls with Double Fibre-Plaster Coating Boards

990

Influence of fasteners disposition on behaviour of timber-framed walls with single fibre–plaster sheathing boards

991

Influence of fast-heating processes and O atom production by a nanosecond spark discharge on the ignition of a lean –air premixed flame

992

Influence of Fasting on Functional Recovery of the Isolated Heart Exposed to Ischemia Reperfusion in Young and Aged Male Albino Rats

993

Influence of fat content on physico-chemical and oxidative stability of foal liver pâté

994

Influence of fat on the perceived texture of set acid milk gels: a sensory perspective

995

Influence of fat/carbohydrate ratio on progression of fatty liver disease and on development of osteopenia in male rats fed alcohol via total enteral nutrition (TEN)

996

Influence of fathersʹ social class on cardiovascular disease in middle-aged men

997

Influence of fatigue and aggressive exposure on GFRP girder to SFRSCC deck all-adhesive connection

998

Influence of fatigue load range on the growth of a microstructurally short edge crack simulated by a discrete dislocation formulation

999

Influence of fatigue, depression, and demographic, socioeconomic, and clinical variables on quality of life of patients with epilepsy

1000

Influence of fatty acid chain length and cis/trans isomerization on postprandial lipemia and factor VII in healthy subjects (postprandial lipids and factor VII)

بازگشت