بر اساس عنوان

1
Application of free sorting tasks to sound quality experiments
2
APPLICATION OF FREE VIBRATION ANALYSIS OF MEMBRANES USING THE NON-DIMENSIONAL DYNAMIC INFLUENCE FUNCTION
3
Application of free vortex theory to estimating discharge coefficient for sharp-crested weirs
4
Application of free-standing multilayer films as polarizers for X-ray radiation
5
Application of free-standing multilayer films as polarizers for X-ray radiation
6
Application of Free-Wilson matrices to the analysis of the tautomerism and aromaticity of azapentalenes: a DFT study
7
Application of frequency correlation function to radar target detection
8
Application of Frequency Domain Photon Migration to Particle Size Analysis and Monitoring of Pharmaceutical Powders
9
Application of frequency family separation method based upon EMD and local Hilbert energy spectrum method to gear fault diagnosis
10
Application of frequency ratio and logistic regression to active rock glacier occurrence in the Andes of San Juan, Argentina
11
Application of frequency-domain helicopter-borne electromagnetics for groundwater exploration in urban areas
12
Application of frequency-domain linearized Euler solutions to the prediction of aft fan tones and comparison with experimental measurements on model scale turbofan exhaust nozzles
13
Application of frequency-following servocompensator to tracking control
14
Application of Friction Energy Consumption Support in the Project
15
Application of Friction Stir Processing (FSP) as a Cladding Method to Produce AA2024-AA1050 Multi-layer Sheets
16
Application of front tracking techniques to the turbulent combustion processes in a single stroke device
17
Application of FRP composites for underwater piles repair
18
Application of FRP laminates for strengthening of a reinforced-concrete T-beam bridge structure
19
Application of Frustrated Total Internal Reflection Devices to Analytical Laser Spectroscopy
20
Application of FT-based MMSE deconvolution method for cerebral blood flow measurement in patients with leukoaraiosis
21
Application of FT-IR for in situ investigation of high temperature electrode reactions
22
Application of FTIR in direct methanol fuel cells – Quantitative analysis of PTFE in gas diffusion layers
23
Application of FTIR spectroscopy to determine transport properties and water–polymer interactions in polypropylene (PP)/poly(ethylene-co-vinyl alcohol) (EVOH) blend films: Effect of poly(ethylene-co-vinyl alcohol) content and water activity
24
Application of FT-IR spectroscopy to the characterisation and classification of wines, brandies and other distilled drinks
25
Application of FTIR-ATR spectroscopy to the quantification of sugar in honey
26
Application of FTIR-ATR to Moscatel dessert wines for prediction of total phenolic and flavonoid contents and antioxidant capacity
27
APPLICATION OF FTIR-SPECTROSCOPY TECHNIQUE IN CHARACTERIZING MOLECULAR STRUCTURE OF NATURAL POZZOLAN-BASED GEOPOLYMER CEMENT
28
Application of FT-MIR spectrometry in wine analysis
29
Application of FT-MIR spectrometry in wine analysis Original Research Article
30
Application of FT-Raman spectroscopy to quality control in brick clays firing process
31
Application of FTTP to alpha-helix or beta-strand motifs
32
Application of full factorial design and Doehlert matrix for the optimisation of beef tallow methanolysis via homogeneous catalysis
33
Application of full factorial design method to silicalite synthesis
34
Application of fullerene C60 nano-oil for performance enhancement of domestic refrigerator compressors
35
Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces
36
Application of Fully Green Bio-Composites in Manufacturing of Wind Turbine Blades: A Strategic Review
37
Application of functional analysis techniques to supervisory systems
38
Application of functional ANOVA to the study of thermal stability of micro–nano silica epoxy composites
39
Application of functional data analysis to investigate seasonal progression with interannual variability in plankton abundance in the Bay of Fundy, Canada
40
Application of functional derivatives to analysis of complex systems
41
Application of Functional Magnetic Resonance Imaging in Neurolinguistics: A Systematic Review
42
Application of functional modelling in the design of industrial control systems
43
Application of functional modelling to the solution of electrical power system optimization problems
44
Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors
45
Application of Functionalized Graphene Oxide Nanosheet in Gas Separation
46
Application of functionalized ZnS nanoparticles to determinate uracil and thymine as a fluorescence probe
47
Application of functionally graded interlayer on reducing the residual stress discontinuities at interfaces within a plasma-sprayed thermal barrier coating
48
Application of fundamental parameter method for investigation of the branching intensity of 1001-keV gamma energy of 234mPa
49
APPLICATION OF FUNDAMENTAL RELATIONS ON n-ARY POLYGROUPS
50
APPLICATION OF FUNDAMENTAL RELATIONS ON n-ARY POLYGROUPS
51
Application of fungal substrate from commercial mushroom production — Pleuorotus ostreatus — for bioremediation of creosote contaminated soil
52
Application of Fungi as Biocatalysts for the Reduction of Diethyl 1-Oxoalkylphosphonates in Anhydrous Hexane
53
Application of fungicides to reduce yield loss in anthracnose-infected lupins
54
Application of fuzzy ABC fractional differential equations in infectious diseases
55
Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility
56
Application of fuzzy AHP for setup reduction in manufacturing industry
57
Application of fuzzy AHP method to IOCG prospectivity mapping: A case study in Taherabad prospecting area, eastern Iran
58
Application of Fuzzy AHP to Identify and Prioritize the Challenges of Resistive Economics in Iran s Agricultural Sector
59
Application of fuzzy algebraic model to statistical analysis of neuro-psychopathology data
60
Application of fuzzy analytic network process for supplier selection in a manufacturing organisation
61
Application of Fuzzy Analytical Hierarchy Process and Quality Function Deployment Techniques for Supplier's Assessment
62
Application of Fuzzy and ABC Algorithm for DG Placement for Minimum Loss in Radial Distribution System
63
Application of Fuzzy Association Rules-Based Feature Selection and Fuzzy ARTMAP to Intrusion Detection
64
Application of Fuzzy Association Rules-Based Feature Selection and Fuzzy ARTMAP to Intrusion Detection
65
Application of ‎F‎uzzy Bicubic Splines Interpolation for Solving ‎T‎wo-Dimensional Linear Fuzzy Fredholm Integral ‎Equations‎‎
66
Application of fuzzy calculations for improving portfolio matrices
67
APPLICATION OF FUZZY CBR AND MODM APPROACHES IN THE PROJECT PORTFOLIO SELECTION IN CONSTRUCTION COMPANIES
68
Application of fuzzy clustering and piezoelectric chemical sensor array for investigation on organic compounds Original Research Article
69
Application of fuzzy clustering to data dealing with phytotoxicity
70
Application of fuzzy clustering to data dealing with phytotoxicity
71
Application of Fuzzy C-mean Cluster Algorithm on Clutter Tracking
72
Application of fuzzy C-Means clustering for seed discrimination by artificial vision
73
Application of fuzzy c-means segmentation technique for tissue differentiation in MR images of a hemorrhagic glioblastoma multiforme
74
Application of Fuzzy Cognitive Map to Design the Causal Structure and Analyze the Factors Affecting Good Governance in the Ports and Maritime Organization
75
Application of fuzzy cognitive maps for cotton yield management in precision farming
76
Application of fuzzy cognitive maps to factors affecting slurry rheology
77
Application of fuzzy control algorithms for electric vehicle antilock braking/traction control systems
78
Application of fuzzy control for a hydraulic forging machin
79
Application of fuzzy control in naturally ventilated buildings for summer conditions
80
Application of fuzzy control of laminar cooling for hot rolled strip
81
Application of fuzzy control to industrial bioprocesses in Japan
82
Application of fuzzy control to start-up of twin screw extruder
83
Application of Fuzzy Data Envelopment Analysis for Ranking Dairy Farms in the View of Energy Efficiency
84
APPLICATION OF FUZZY DELPHI METHOD AS A VITAL ELEMENT IN TECHNOLOGY AS A TOOL IN DESIGN THINKING BASED LEARNING
85
Application of Fuzzy Dematel Method to Allocate Logistics Centers Based on Industry 4 and Center Capabilities: The Logisticians’ Perspective
86
Application of fuzzy distributions on project management
87
Application of Fuzzy Expansion Methods for Solving Fuzzy Fredholm- Volterra Integral Equations of the First Kind
88
Application of fuzzy expert system to estimate dimensional errors of forging products having complicated shape
89
Application of fuzzy expert systems in assessing operational risk of software
90
Application of fuzzy extended AHP methodology on shipping registry selection: The case of Turkish maritime industry
91
Application of Fuzzy Fault Tree Analysis on Oil and Gas Offshore Pipelines
92
Application of Fuzzy Gamma Operator for Mineral Prospectivity Mapping, Case Study: Sonajil Area
93
Application of Fuzzy Gamma Operator to Generate Mineral Prospectivity Mapping for Cu-Mo Porphyry Deposits (Case Study: Kighal-Bourmolk Area, Northwestern Iran)
94
Application of fuzzy goal programming technique to land use planning in agricultural system
95
Application of fuzzy group analytic hierarchy process in partner selection of international joint venture projects
96
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines
97
Application of fuzzy inference system and nonlinear regression models for predicting rock brittleness
98
Application of fuzzy inference to CDMA soft handoff in mobile communication systems
99
Application of fuzzy linear regression algorithm to power system voltage measurements
100
Application of fuzzy logic and neural network technologies in cone crusher control
101
Application of fuzzy logic based expert system in preventive lightning protection
102
Application of fuzzy logic control in industry
103
Application of fuzzy logic control system for reactor feed-water control
104
Application of Fuzzy Logic Controller to Enhance The Semi-SWATH Performance in Following Seas
105
Application of Fuzzy Logic for Advertising Marketing Campaigns
106
Application of fuzzy logic for load frequency control of hydroelectrical power plants
107
Application of fuzzy logic for reactive-power compensation of radial distribution feeders
108
Application of fuzzy logic for the integration of environmental criteria in ecodesign
109
Application of Fuzzy Logic for the Solution of Inverse Kinematics and Hierarchical Controls of Robotic Manipulators
110
Application of fuzzy logic for the study of isomorphism, inversions, symmetry, parallelism and mobility in kinematic chains
111
Application of Fuzzy Logic in Calculation of Urban Water Tariff in Iran
112
Application of fuzzy logic in computer-aided VLSI design
113
Application of fuzzy logic in decision-making process for relocation of floating net cages in river fish farming
114
Application of Fuzzy Logic in Oral Cancer Risk Assessment
115
Application of fuzzy logic in portfolio management: evidence from Iranian researches
116
Application of fuzzy logic in resistive fault modeling and simulation
117
Application Of Fuzzy Logic In The Assessment Of River Flow Characteristics At The Pier Scour
118
Application of Fuzzy Logic on Repairing Robotic of Nuclear Power Plants
119
Application of fuzzy logic stabilisers in a multimachine power system environment
120
Application of fuzzy logic technology for spatial load forecasting
121
APPLICATION OF FUZZY LOGIC TO A LEAKAGE CURRENT RELAY
122
Application of fuzzy logic to Boolean models for digital soil assessment
123
Application of fuzzy logic to spatial thermal control in fusion welding
124
Application of fuzzy logic to the evaluation of runoff in a tropical watershed
125
Application of fuzzy logic-based modeling to improve the performance of the Revised Universal Soil Loss Equation
126
Application of fuzzy logistic regression in modeling the severity of autism spectrum disorder
127
Application of fuzzy mathematical programming approach to the production allocation and distribution supply chain network problem
128
Application of fuzzy mathematics and grey systems in education
129
Application of fuzzy minimum cost flow problems to network design under uncertainty
130
Application of fuzzy modeling and response surface methodology for optimization of cadmium uptake by Colpomenia sinosa
131
Application of fuzzy multi-criteria decision making methods for financial performance evaluation of Turkish manufacturing industries
132
Application of fuzzy multi-objective decision making in spatial load forecasting
133
Application of Fuzzy Multi-Objective Function on Reducing Groundwater Demand for Aquaculture in Land-Subsidence Areas
134
Application of fuzzy multi-objective linear programming to aggregate production planning
135
Application of fuzzy Naive Bayes and a real-valued genetic algorithm in identification of fuzzy model
136
Application of fuzzy neural network in predicting the risk of rock burst
137
Application of fuzzy neural networks and artificial intelligence for load forecasting
138
Application of fuzzy numerical techniques for product performance analysis in the conceptual and preliminary design stage
139
Application of fuzzy on-line self-adaptive controller for a contour tracking robot on unknown contours
140
Application of Fuzzy Optimization in Diet Formulation
141
Application of fuzzy optimization to diet problems in Argentinean farms
142
Application of fuzzy reasoning to prediction of beef sirloin quality using time temperature integrators (TTIs)
143
Application of fuzzy set and neural network techniques in determining food process control set points
144
APPLICATION OF FUZZY SET THEORY IN EVALUATION OF SOIL COLLAPSE POTENTIAL
145
Application of fuzzy set theory to evaluate the probability of failure in rock slopes
146
Application of fuzzy set theory to the change intervals at a signalized intersection
147
Application of fuzzy sets for estimating service life of reinforced concrete structural members in corrosive environments
148
Application of Fuzzy Sets Method to Identify Seepage Path through Dams
149
Application of fuzzy sets to manufacturing/distribution planning decisions in supply chains
150
Application of fuzzy sets to manufacturing/distribution planning decisions with multi-product and multi-time period in supply chains
151
Application of fuzzy sets to transient analysis of space structures
152
Application of fuzzy sets with different t-norms in the interpretation of portfolio matrices in strategic management
153
Application of Fuzzy System in Psychological Tests: Optimize the Number of Questions for WHOQOL-BREF
154
application of fuzzy systems on the numerical solution of the elliptic pde-constrained optimal control problems
155
ApPLICATION OF FUZZY TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO THE IDEAL SOLUTION IN THE SELECTION OF CANDIDATES
156
Application of Fuzzy Technique for Order-Preference by Similarity to Ideal Solution (FTOPSIS) to Prioritize Water Resource Development Economic Scenarios in Pishin Catchment
157
Application of fuzzy techniques to develop an assessment framework for building design eco-drivers
158
Application of Fuzzy Technologies and Neural Networks in Rubber Industry
159
Application of Fuzzy Technologies and Neural Networks in Rubber Industry
160
Application of fuzzy theory to predict deformation behaviors of magnesium alloy sheets under hot extrusion
161
Application of Fuzzy theory to project scheduling with critical path method
162
Application of fuzzy theory to value engineering
163
Application of fuzzy time series models for forecasting pollution concentrations
164
Application of fuzzy time series models for forecasting the amount of Taiwan export
165
Application of fuzzy T-norms towards a new Artificial Neural Networks’ evaluation framework: A case from wood industry
166
Application of fuzzy TOPSIS in evaluating sustainable transportation systems
167
APPLICATION OF FUZZY TOPSIS METHOD AND DOPGA ALGORITHM IN PURCHASING DECISION PROCESS: 3D TELEVISION EXAMPLE
168
Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component
169
Application of fuzzy VIKOR and fuzzy TOPSIS methods for warehouse logistics operator selection
170
Application of fuzzy VIKOR for evaluation of green supply chain management practices
171
Application of fuzzy-based pattern recognition techniques for cluster finding in a preshower detector in high energy heavy ion experiments
172
Application of fuzzy-based pattern recognition techniques for cluster finding in a preshower detector in high energy heavy ion experiments
173
APPLICATION OF FUZZY-GENETIC ALGORITHM FOR SOLVING AN OPEN TRANSPORTATION
174
Application of fuzzy-logic models for metabolic control analysis
175
Application of fuzzy-MOORA method: Ranking of components for reliability estimation of component-based software systems
176
Application of G /G-expansion method to the (2+1)-dimensional dispersive long wave equation
177
Application of GA based optimal integral gains in fuzzy based active power-frequency control of non-reheat and reheat thermal generating systems
178
Application of GA in optimal robot selection for bridge restoration
179
Application of GA in Optimization of Modified Benzene Alkylation Process
180
Application of GA in optimization of pore network models generated by multi-cellular growth algorithms
181
Application of GA optimization for automatic generation control design in an interconnected power system
182
Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process
183
Application of GA/GA-SA based fuzzy automatic generation control of a multi-area thermal generating system
184
Application of GA-based neural network for attitude control of a satellite
185
Application of Gabor transform technique to supervise power system transient harmonics
186
Application of galactose-modified liposomes as a potent antigen presenting cell targeted carrier for intranasal immunization
187
Application of Galerkin finite-element computations in studying electrohydrodynamic problems
188
Application of Galerkin meshfree methods to nonlinear thermo-mechanical simulation of solids under extremely high pulsed loading
189
Application of gallic acid and xanthene dyes for determination of ozone in air with a chemiluminescence aerosol detector Original Research Article
190
Application of gallium film electrode for elimination of copper interference in anodic stripping voltammetry of zinc
191
Application of Galois field for Error Correction in OCDMA based Wireless Infrared Communications
192
Application of gambler’s ruin model to sediment transport problems
193
Application of game theory based hybrid algorithm for multi-objective integrated process planning and scheduling
194
Application of game theory for a groundwater conflict in Mexico
195
APPLICATION OF GAME THEORY IN DYNAMIC COMPETITIVE PRICING WITH ONE PRICE LEADER AND N DEPENDENT FOLLOWERS
196
Application of game theory in government strategies for industrial collaborative research and development
197
Application of Game Theory to Neuronal Networks
198
Application of Gamification Elements, Theories and Techniques for Efficient Accounting Teaching: A Systematic Literature Review
199
Application of GA-MLR, GA-PLS and the DFT quantum mechanical (QM) calculations for the prediction of the selectivity coefficients of a histamine-selective electrode
200
Application of gamma camera imaging and SPECT systems in chemical processes
201
Application of gamma-ray imager for non-destructive testing
202
Application of gamma-ray imager for non-destructive testing
203
Application of gas chromatography coupled to chemical ionisation mass spectrometry following headspace solid-phase microextraction for the determination of free volatile fatty acids in aqueous samples
204
Application of gas chromatography time-of-flight mass spectrometry for target and non-target analysis of pesticide residues in fruits and vegetables
205
Application of gas chromatography with atomic emission detection to the geochemical investigation of polycyclic aromatic sulfur heterocycles in Egyptian crude oils
206
Application of gas chromatography–(triple quadrupole) mass spectrometry with atmospheric pressure chemical ionization for the determination of multiclass pesticides in fruits and vegetables
207
Application of gas chromatography/mass spectrometry in studies on separation and identification of organic species in coals
208
Application of gas chromatography-hybrid chemical ionization mass spectrometry to the analysis of diclofenac in wastewater samples
209
Application of gas chromatography-mass spectrometry for the determination of urinary ethylenethiourea in humans
210
Application of gas chromatography–olfactometry (GC–O) in analysis and quality assessment of alcoholic beverages – A review
211
Application of gas chromatography–surface ionization organic mass spectrometry to forensic toxicology
212
Application of gas chromatography–tandem mass spectrometry to the analysis of inhibition of dimerisation of tributylphosphate under radiolysis: Identification of isomeric tributylphosphate-alkylbenzene inhibitor coupling products
213
Application of gas chromatography–tandem mass spectrometry to the analysis of pesticides in fruits and vegetables
214
Application of gas chromatography-triple quadrupole mass spectrometry in the quantification-confirmation of pesticides and polychlorinated biphenyls in eggs at trace levels
215
Application of Gas Microstrip Detectors for X-ray Absorption Spectroscopy in Common Process Gases
216
Application of gas separation membranes to detritiation systems Original Research Article
217
Application of gas separation to recover biohydrogen produced by Thiocapsa roseopersicina Original Research Article
218
Application of gas/liquid two-phase flows during crossflow microfiltration of skimmed milk under constant transmembrane pressure conditions
219
Application of gas-cooled Accelerator Driven System (ADS) transmutation devices to sustainable nuclear energy development
220
Application of gaseous fuel reburning for controlling nitric oxide emissions in boilers
221
Application of gaseous ozone to control populations of Escherichia coli, Bacillus cereus and Bacillus cereus spores in dried figs Original Research Article
222
Application of gas-inducing reactor to obtain high oxygen dissolution in aeration process
223
Application of gas-sensor array technology for detection and monitoring of growth of spoilage bacteria in milk: A model study Original Research Article
224
Application of gas-turbine exhaust gases for brackish water desalination: a techno-economic evaluation
225
Application of Gaussian expansion method to nuclear mean-field calculations with deformation Original Research Article
226
Application of Gaussian plume models for air pollution simulation at instantaneous emissions Original Research Article
227
Application of Gaussian Process Regression (GPR) in Estimating Under-five Mortality Levels and Trends in Iran 1990 – 2013, Study Protocol
228
Application of Gaussian processes for black-box modelling of biosystems
229
Application of Gaussian quadratures to density functional (df) theories of confined liquid crystals
230
Application of GC–MS chromatography for the analysis of the oil fractions extracted by supercritical CO2 at high pressure
231
Application of GC–MS to the study of anthracene disappearance in the rhizosphere of ryegrass
232
Application of GC–MS/MS for the analysis of PCDD/Fs in sewage effluents
233
Application of GCN approach for power distribution system contingency load transfer
234
Application of GC-PPC-SAFT EoS to amine mixtures with a predictive approach
235
Application of GC-PPC-SAFT EoS to ammonia and its mixtures
236
Application of GC-SAFT EOS to polar systems using a segment approach
237
Application of GC-SAFT EOS to polycyclic aromatic hydrocarbons
238
Application of GEANT4 radiation transport toolkit to dose calculations in anthropomorphic phantoms
239
Application of Geiger-mode photosensors in Cherenkov detectors
240
Application of Geiger-mode photosensors in Cherenkov detectors
241
Application of gel alkylene oxide electrolytes to rechargeable lithium batteries
242
Application of gelcasting process in ceria membranes formation
243
Application of gelcasting to the fabrication of piezoelectric ceramic parts
244
Application of Gemstone CT Spectroscopy in the Evaluation of Abnormal Enhancement of Lesion Margin After Radiofrequency Ablation of Hepatocellular Carcinoma
245
Application of Gene Expression Programming to Evaluate Strength Characteristics of Hydrated-Lime-Activated Rice Husk Ash-Treated Expansive Soil
246
Application of Gene Expression Programming to water dissolved oxygen concentration prediction
247
Application of gene sequences in plant phylogenetic inferences
248
Application of general algebraic modeling system to power system optimization
249
Application of General Regression Neural Network to the Prediction of LOD Change
250
Application of general semi-infinite programming to lapidary cutting problems
251
Application of generalised linear model for time-dependent trend assessment—A case study for the ageing PSA network
252
Application of generalised linear model for time-dependent trend assessment—A case study for the ageing PSA network
253
Application of generalised polynomials to the decoupling of linear multivariable systems
254
Application of generalized additive models to butterfly transect count data
255
Application of generalized artificial neural networks coupled with an orthogonal design to optimization of a system for the kinetic spectrophotometric determination of Hg(II) Original Research Article
256
Application of generalized complex modes to the calculation of the forced response of three-dimensional poroelastic materials
257
Application of generalized deformation theory to irradiation creep of fcc and bcc stainless steels
258
Application of generalized differential quadrature rule in Blasius and Onsager equations
259
Application of generalized differential transform method to multi-order fractional differential equations
260
Application of generalized filter-diagonalization to extract instantaneous normal modes
261
Application of generalized filter-diagonalization to extract instantaneous normal modes (Chem. Phys. Letters 252 (1996) 173)
262
Application of generalized measures to an orthotropic finite elasto-plasticity model
263
APPLICATION OF GENERALIZED MULTIPOLE TECHNIQUE TO THE ANALYSIS OF DISCONTINUITIES IN SUBSTRATE INTEGRATED WAVEGUIDES
264
Application of generalized Richardson extrapolation to the computation of the flow across an asymmetric street intersection
265
Application of generalized thermostatistics to fully developed turbulence
266
Application of generalized wavelets: An adaptive multiresolution scheme
267
Application of generative technologies in the design of reduced stiffness stems of hip joint endoprosthesis
268
Application of generic data assimilation tools (DATools) for flood forecasting purposes
269
Application of generic principles of process intensification to solution crystallization enabled by a task-based design approach
270
Application of genetic algorithm (GA) technique on demand estimation of fossil fuels in Turkey
271
Application of Genetic Algorithm (GA) to estimate the rate parameters for solid state reduction of iron ore in presence of graphite
272
Application of genetic algorithm (GA) to select input variables in support vector machine (SVM) for analyzing the occurrence of roach, Rutilus rutilus, in streams
273
Application of genetic algorithm and greedy stepwise to select input variables in classification tree models for the prediction of habitat requirements of Azolla filiculoides (Lam.) in Anzali wetland, Iran
274
Application of genetic algorithm and greedy stepwise to select input variables in classification tree models for the prediction of habitat requirements of Azolla filiculoides (Lam.) in Anzali wetland, Iran
275
Application of Genetic Algorithm Based Support Vector Machine Model in Second Virial Coefficient Prediction of Pure Compounds
276
Application of genetic algorithm for baseline optimization in standard addition voltammetry
277
Application of genetic algorithm for determination of Angström equation coefficients
278
Application of genetic algorithm for modeling of dense packing of concrete aggregates
279
Application of genetic algorithm for optimization of control strategy in parallel hybrid electric vehicles
280
Application of genetic algorithm for optimization of vegetable oil hydrogenation process Original Research Article
281
Application of genetic algorithm for optimum design of bolted composite lap joints
282
Application of genetic algorithm for reliability allocation in nuclear power plants
283
Application of genetic algorithm for selection of variables for the BLLS method applied to determination of pesticides and metabolites in wine Original Research Article
284
APPLICATION OF GENETIC ALGORITHM FOR SHIP HULL FORM OPTIMIZATION
285
Application of Genetic Algorithm for Simulation of Land Use and Land Cover Changes; Case of Karaj City, Iran
286
Application of Genetic Algorithm for the Bin Packing Problem with a New Representation Scheme
287
Application of Genetic Algorithm in Development of Bankruptcy Predication Theory Case Study: Companies Listed on Tehran Stock Exchange
288
Application of Genetic Algorithm in Development of Bankruptcy Predication Theory Case Study: Companies Listed on Tehran Stock Exchange
289
Application of Genetic Algorithm in Kinetic Modeling and Reaction Mechanism Studies
290
Application of Genetic Algorithm in Kinetic Modeling of Fischer-Tropsch Synthesis
291
Application of Genetic Algorithm in unit selection for Malay speech synthesis system
292
Application of Genetic Algorithm Optimization and Least Square Method for depth determination from residual gravity anomalies
293
Application of genetic algorithm to computer-aided process planning in preliminary and detailed planning
294
Application of genetic algorithm to computer-aided process planning in preliminary and detailed planning
295
Application of Genetic Algorithm to Determine Kinetic Parameters of Free Radical Polymerization of Vinyl Acetate by Multi-objective Optimization Technique
296
Application of genetic algorithm to optimization of buckling restrained braces for seismic upgrading of existing structures
297
Application of Genetic Algorithm to Parameter Estimation in Liquid-Liquid Phase Equilibrium Modeling
298
Application of Genetic Algorithm to Solving Nonlinear Model of Aeroengines
299
Application of Genetic Algorithm to the calculation of parameters for NRTL and Two-Suffix Margules models in ternary extraction ionic liquid systems
300
Application of Genetic Algorithm With a Novel Adaptive Scheme for the Identification of Induction Machine Parameters
301
Application of genetic algorithm-based fuzzy logic control in wire transport system of wire-EDM machine
302
APPLICATION OF GENETIC ALGORITHMS AND FUZZY CONTROL TO A COMBINED SEWER PUMPING STATION
303
APPLICATION OF GENETIC ALGORITHMS AND FUZZY CONTROL TO A COMBINED SEWER PUMPING STATION
304
Application of genetic algorithms and thermogravimetry to determine the kinetics of polyurethane foam in smoldering combustion
305
Application of genetic algorithms for control design in power systems
306
APPLICATION OF GENETIC ALGORITHMS FOR OPTIMIZATION OF DRIP IRRIGATION SYSTEMS
307
APPLICATION OF GENETIC ALGORITHMS FOR OPTIMIZATION OF DRIP IRRIGATION SYSTEMS
308
Application of Genetic Algorithms for Pixel Selection in MIA-QSAR Studies on Anti-HIV HEPT Analogues for New Design Derivatives
309
APPLICATION OF GENETIC ALGORITHMS FOR ROBUST PARAMETER OPTIMIZATION
310
Application of genetic algorithms for the identification of elastic constants of composite materials from dynamic tests
311
Application of genetic algorithms to conceptual design of a micro-air vehicle
312
Application of genetic algorithms to determine worst-case switching overvoltage of MRT systems
313
Application of genetic algorithms to fault diagnosis in nuclear power plants
314
Application of genetic algorithms to fault diagnosis in nuclear power plants
315
Application of genetic algorithms to lubrication pump stacking design
316
Application of genetic algorithms to optimization of rolling schedules based on damage mechanics
317
Application of genetic algorithms to optimize burnable poison placement in pressurized water reactors
318
Application of genetic algorithms to state estimation of tethered systems Original Research Article
319
Application of genetic algorithms to stereo matching of images
320
Application of genetic algorithms to the design optimization of an active vehicle suspension system Original Research Article
321
Application of Genetic and Bees Algorithms in the Design of Reinforced Concrete Retaining Walls for Static and Pseudo-Dynamic Loadings
322
Application of genetic based fuzzy systems to hydroelectric generation scheduling
323
Application of genetic markers to the identification of recrudescent Plasmodium falciparum infections on the northwestern border of Thailand
324
Application of genetic methods in materials’ design
325
Application of Genetic Programming as a Powerful Tool for Modeling of Cellulose Acetate Membrane Preparation
326
Application of genetic programming for modelling of material characteristics
327
Application of genetic programming to develop the model for estimating membrane damage in the membrane integrity test using fluorescent nanoparticle Original Research Article
328
Application of genetic programming to high energy physics event selection
329
Application of genetic programming to high energy physics event selection
330
Application of Genetic Programming to Modeling and Prediction of Activity Coefficient Ratio of Electrolytes in Aqueous Electrolyte Solution Containing Amino Acids
331
Application of genetic stochastic resonance algorithm to quantitative structure–activity relationship study
332
Application of Genetically Engineered Dioxygenase Producing Pseudomonas putida on Decomposition of Oil from Spiked Soil
333
Application of Genetically Optimized ADRC Based on Backpropagation Neural Network
334
Application of genetic-based neural network to lateritic soil strength modeling
335
Application of genetic-based neural networks to thermal unit commitment
336
Application of genome sequence information to the classification of bovine enteroviruses: the importance of 5′- and 3′-nontranslated regions
337
Application of Genomic and Proteomic Technologies to Early Detection of Cancer
338
Application of genomic technologies to the improvement of meat quality of farm animals
339
Application of genomic technologies:: DNA microarrays and metabolic profiling of obesity in the hypothalamus and in subcutaneous fat
340
Application of genomics to field investigations of malaria by the international centers of excellence for malaria research
341
Application of Geochemical Data as Evidence of Water-Rock Interaction in the Sarvak Formation, Izeh Zone, Zagros, Iran
342
Application of Geochemical Methods in Geothermal Exploration in Kenya
343
Application of geochemical parameters for classification of crude oils from Egypt into source-related types
344
Application of geochemical ratios for delineating gem-bearing areas in high grade metamorphic terrains
345
Application of geochemical zonality coefficients in mineral prospectivity mapping
346
Application of geochemistry and radioactivity in the hydrogeological investigation of carbonate aquifers (Sierras Blanca and Mijas, southern Spain)
347
Application of geoelectric methods on paleoenvironments of the Qa’el-Jufr lake, southeastern Jordan Plateau
348
Application of geoelectric methods on paleoenvironments of the Qa’el-Jufr lake, southeastern Jordan Plateau
349
Application of Geographic Information System in Monitoring and Detecting the COVID-19 Outbreak
350
Application of geographic information system to distribution information support
351
Application of geographic information systems and remote sensing to schistosomiasis control in China
352
Application of geographic information systems in construction safety planning
353
Application of Geographical Information System (GIS) in Analysis and Detection of Microbial Contamination in Water Supply Network
354
Application of Geographical Information System (GIS) for mapping road traffic injuries using existing source of data in Karachi, Pakistan — A pilot study
355
Application of geographical information system for farm mechanization education and training
356
Application of geographical information system in disposal site selection for hazardous wastes
357
Application of Geographical Information System Techniques to Determine HighCrash-Prone Areas in the Fort Peck Indian Reservation
358
Application of geographical information system to site selection of small run-of-river hydropower project by considering engineering/economic/environmental criteria and social impact
359
Application of geographical information systems to rural electrification with renewable energy sources
360
Application of Geographical Location Differences of the Sun-Path Diagram in Climatic Architecture
361
Application of geographical sciences and technologies to investigate health problems in the Eastern Mediterranean Region
362
Application of geographically weighted regression to identify spatially non-stationary relationships between Fe mineralization and its controlling factors in eastern Tianshan, China
363
APPLICATION OF GEOINFORMATION TECHNOLOGY IN THE ARMED FORCES IN THE REPUBLIC OF KAZAKHSTAN
364
Application of geoinformation systems in the armed forces and other military formations in the Republic of Kazakhstan
365
Application of geological model dynamic updating method in Guanjiapu Oilfield, Dagang
366
Application of Geometric Method in Video Processing to Study the Tensile Properties of Spacer Fabric
367
Application of Geometric Midline Yield Criterion for Strip Drawing Original Research Article
368
Application of geometric models to inverted listric fault systems in sandbox experiments. Paper 1: 2D hanging wall deformation and section restoration
369
Application of geometric models to inverted listric fault systems in sandbox experiments. Paper 2: insights for possible along strike migration of material during 3D hanging wall deformation
370
Application of Geophysical Methods in Agriculture
371
Application of Geospatial Information System for the Study of Illuminance in Carpet Weaving Workshops in Bokan, Iran
372
Application of Geospatial Technology for Infectious Disease Surveillance: A Study of Covid-19 Pandemic in North-east India
373
Application of Geostatistical Methods for determining nitrate concentrations in Groundwater (case study of Mashhad plain, Iran)
374
Application of geostatistical methods for mapping groundwater phosphate concentration in Eyvan plain, Ilam, Iran
375
Application of Geostatistical Methods to Estimate Groundwater Level Fluctuations
376
Application of Geostatistical Modelling to Study the Exploration Adequacy of Uniaxial Compressive Strength of Intact Rock alongthe Behesht-Abad Tunnel Route
377
Application of geostatistical techniques to exploitation planning in slate quarries
378
Application of geostatistics to identify gold-rich areas in the Finisterre-Fervenza region, NW Spain
379
Application of geothermal absorption air-conditioning system: A case study
380
Application of geothermal energy for heating and fresh water production in a brackish water greenhouse desalination unit: A case study from Algeria
381
Application of germinated maize starch in textile printing
382
Application of germinated maize starch in textile printing
383
Application of GESPECOR software for the calculation of coincidence summing effects in special cases
384
Application of GGE biplot analysis to evaluate grain yield stability of rainfed spring durum wheat genotypes and test locations by climatic factors in Iran
385
Application of GIS and crop growth models in estimating water productivity
386
Application of Gis and Gps in Precision Agriculture (a Review)
387
Application of GIS and remote sensing techniques in generation of land use scenarios for hydrological modeling
388
Application of GIS and Web technologies for Danube waterway data management in Croatia
389
Application of GIS in plant conservation programmes in Portugal Original Research Article
390
Application of GIS in Training for Environmental Management
391
Application of GIS in Urban Traffic Noise Pollution
392
Application of GIS to biodiversity monitoring
393
Application of GIS to modified models of vehicle emission dispersion
394
Application of GIS to spatial analysis of mesofault populations
395
Application of GIS-Based Back Propagation Artificial Neural Networks and Logistic Regression for shallow Landslide Susceptibility Mapping in South China-Take Meijiang River Basin as an Example
396
APPLICATION OF GLASS COMPOSITE MATERIALS FOR NUCLEAR WASTE IMMOBILIZATION
397
Application of glass filled thermoplastics for design of low/high temperature signal conditioning devices
398
Application of glass particles doped by Zn+ 2 as an antimicrobial and atoxic compound in LLDPE and HDPE
399
Application of Glassy Carbon Electrode Modified with Co3O4 Nanoparticles for Voltammetric Determination of Folic Acid
400
Application of glauconite and fossil palynomorphs in reconstructing the Liassic paleogeography just before the opening of the Gulf of Mexico (Part II)
401
Application of glauconite and fossil palynomorphs in reconstructing the Liassic paleogeography just before the opening of the Gulf of Mexico
402
Application of global computational tools GeneOrder and CoreGenes to the comparative analyses of chordopoxvirus genomes
403
Application of global optimization and radial basis functions to numerical solutions of weakly singular volterra integral equations
404
Application of global optimization methods to model and feature selection
405
Application of global optimization strategies to refinery hydrogen network
406
Application of global sensitivity analysis to a tire model with correlated inputs
407
Application of glow discharge mass spectrometry for direct trace impurity analysis in Cu films
408
Application of glow discharges for tritium removal from JT-60U vacuum vessel
409
Application of glucosamine on human disease—Osteoarthritis
410
Application of glucose as a green capping agent and reductant to fabricate CuI micro/nanostructures
411
Application of glycine containing solutions for electroless deposition of Co–P and Co–W–P films and their behavior as barrier layers
412
Application of glyco-blotting for identification of structures of polysaccharides causing membrane fouling in a pilot-scale membrane bioreactor treating municipal wastewater
413
Application of glycosidase activity as a marker for characterizing and identifying vegetables
414
Application of glycosidase activity as a marker for characterizing and identifying vegetables
415
Application of GMA Equation of State to Study Thermodynamic Properties of 2- Amino-2-methyl-1-propanol as an Efficient Absorbent for CO2
416
Application of goal programming for target setting in Irans auto
417
Application of goal programming in a multi-objective reservoir operation model in Tunisia
418
Application of goal programming in project selection decision — A case study from the Indian coal mining industry
419
Application of goal programming to improve human resource allocation for urban family physician plan in Iran
420
Application of Gold Core-Shell Magnetic Nanoparticles Immunosensor for Detection of Vibrio cholera
421
Application of gold nanoparticles/TiO2 modified electrode for the electrooxidative determination of catechol in tea samples
422
Application of gold quenching of luminescence to improve oxygen sensing using a ruthenium (4,7-diphenyl-1,10-phenanthroline)3Cl2:TEOS thin film
423
application of good faith principles in transition and registration of land rights with the deed of land deed making officials as the embodiment of article 33 paragraph (3) of the 1945 constitution
424
Application of GPR for 3-D visualization of geological and structural variation in a limestone formation
425
Application of GPS technology to measurements of displacements of high-rise structures due to weak winds
426
Application of Graded Finite Elements for Asphalt Pavements
427
Application of gradient descent method to the sedimentary grain-size distribution fitting
428
Application of gradient programs for the determination of underivatized amino acids and small peptides in reversed-phase high-performance liquid chromatography with contactless conductivity detection
429
Application of Grammatical Judgment Tests to the Measurement of Explicit versus Implicit Knowledge in EFL Classroom
430
Application of granular activated carbon packed-bed reactor in microwave radiation field to treat phenol
431
Application of granulated activated carbon packed-bed reactor in microwave radiation field to treat BTX
432
Application of graph theory and canonical forms in reliability analysis of symmetric structures
433
Application of Graph Theory: Relationship of Eccentric Connectivity Index and Wiener’s Index with Anti-inflammatory Activity
434
Application of Graph Theory: Relationship of Topological Indices with the Partition Coefficient (logP) of the Monocarboxylic Acids
435
Application of Graphene and Graphene Oxide for modification of electrochemical sensors and biosensors: A review
436
Application of graphene as the stationary phase for open-tubular capillary electrochromatography
437
Application of graphene derivatives in cancer therapy: A review
438
Application of graphene for preconcentration and highly sensitive stripping voltammetric analysis of organophosphate pesticide Original Research Article
439
Application of Graphene Oxide- Magnetic Nanoparticle for Solid Phase Extraction of Trace Amounts of Cadmium Ions in Environmental Samples
440
Application of Graphene Oxide- Magnetic Nanoparticle for Solid Phase Extraction of Trace Amounts of Cadmium Ions in Environmental Samples
441
Application of graphene oxide nanosheets as probe oligonucleotide immobilization platform for DNA sensing
442
Application of Graphene Oxide Reinforced Hollow Fibers as a Novel Electromembrane Extraction Method for Quantitative Analysis of Dicyandiamide in Infant Formula
443
Application of graphene-based solid-phase extraction for ultra-fast determination of malachite green and its metabolite in fish tissues
444
Application of graphene-ionic liquid-chitosan composite-modified carbon molecular wire electrode for the sensitive determination of adenosine-5′-monophosphate
445
Application of graphene–pyrenebutyric acid nanocomposite as probe oligonucleotide immobilization platform in a DNA biosensor
446
Application of Graphite Coated Potassium-Selective Electrode in Determination of Potassium in Real Samples
447
Application of Graphite Screen Printed Electrode Modified with Indium(III) Mixed-ligand Nanocomplex for Voltammetric Determination of Amlodipine
448
Application of graphite–solid electrolyte composite anode in all-solid-state lithium secondary battery with Li2S positive electrode
449
Application of gravity drainage to the recovery of residual LNAPL in homogeneous and lensed sand packs
450
Application of Gravity Method in Fault Path Detection
451
Application of gravity separators for enrichment of South Chah Palang tungsten ore
452
Application of gravity separators for enrichment of South ChahP alang tungsten ore
453
Application of Gray and Fuzzy Methods for Rainfall Forecasting
454
Application of Gray codes to the study of the theory of symbolic dynamics of unimodal maps
455
Application of gray-based DEMATEL technique in designing of the aggregate green supply chain management’s model
456
Application of Greedy Randomized Adaptive Search Procedure to the Biclustering of Gene Expression Data
457
Application of Green Chemistry in Synthesis of Functionalized Thiopyran via One-pot Multicomponent Reactions in Water
458
Application of Green Chemistry in Synthesis of Functionalized Thiopyran via One-pot Multicomponent Reactions in Water
459
Application of Green Chemistry in the Synthesis of Thiopyran Derivatives
460
Application of Green Novel NiO/ZSM-5 for Removal of Lead and Mercury ions from Aqueous Solution: Investigation of Adsorption Parameters
461
Application of Green Procedure for the Synthesis of Substituted Pyrroles: Multi-component Reaction of Oxalyl Chloride
462
Application of green zero-valent iron nanoparticles to the remediation of soils contaminated with ibuprofen Original Research Article
463
Application of grey correlation-based EDAS method for parametric optimization of non-traditional machining processes
464
Application of grey GIS filtration to identify the potential area for cement plants in South Khorasan Province, Eastern Iran
465
Application of grey linear programming to short-term hydro scheduling
466
Application of grey modeling method to fitting and forecasting wear trend of marine diesel engines
467
Application of grey prediction to inverse nonlinear heat conduction problem
468
Application of grey relation analysis to hydroelectric generation scheduling
469
Application of grey relation analysis to hydroelectric generation scheduling
470
Application of Grey Relational Analysis for Optimizing Weld Bead Geometry Parameters of Pulsed Current Micro Plasma Arc Welded AISI 304L Stainless Steel Sheets
471
Application of Grey System Theory in Rainfall Estimation
472
Application of Grey System Theory in the Development of a Runoff Prediction Model
473
Application of Grey theory and multiobjective programming towards airline network design
474
Application of Grey Wolf Optimization Algorithm with Aggregation Function on Designing Interleaved Boost Converter
475
Application of Grey-autoregressive Dynamic Model to Calculation of Atomic Time Scale
476
Application of grey-fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature
477
Application of Grey–Taguchi based multi-objective optimization strategy to calibrate the PM–NHC–BSFC trade-off characteristics of a CRDI assisted CNG dual-fuel engine
478
Application of Grey-TOPSIS approach to evaluate value chain performance of tea processing chains
479
Application of Grignard reagents to the synthesis of tertiary methylamines via resin-bound oxyiminium ions
480
Application of Grignard reagents to the synthesis of tertiary methylamines via resin-bound oxyiminium ions
481
Application of Grignard reagents to the synthesis of tertiary methylamines via resin-bound oxyiminium ions
482
Application of Gröbner bases and quantifier elimination for insightful engineering design Original Research Article
483
Application of ground penetrating radar imaging to deepwater (turbidite) outcrops
484
Application of ground-penetrating radar, digital optical borehole images, and cores for characterization of porosity hydraulic conductivity and paleokarst in the Biscayne aquifer, southeastern Florida, USA
485
Application of groundwater cooling scheme for London Underground network
486
Application Of Group Analytic Hierarchy Process (Gahp) Method in Ranking the Factors Affecting the Formation of Organizational Networks in Order to Provide More Appropriate Services to Citizens
487
Application of group contribution SAFT equation of state (GC-SAFT) to model phase behaviour of light and heavy esters
488
Application of group representation theory to derive Hermite interpolation polynomials on a triangle
489
Application of group technology for design data management
490
Application of Grouped MCDM Technique for Ranking and Selection of Laptops in the Current Scenario of COVID-19
491
Application of growth factor stimulants improves cytogenetic analysis of chronic myeloproliferative disorder patients without alteration to cell lineage or clonality
492
Application of Grunwald–Winstein correlation analyses with YBnBr scales to the solvolysis of benzoyl bromides
493
Application of guanidine and its salts in multicomponent reactions
494
Application of Guanidine Hcl to Improve Enantioseparation of a Model Basic Drug, Cetirizine, By Capillary Electrophoresis Using Sulfated Β-Cyclodextrin
495
Application of guar gum in electrospun nanofibers as mebendazole drug release controller: a kinetic study and thermodynamics analysis
496
Application of Gully and Rill Erosion Indicators for Estimating Soil Loss Using GIS Techniques (Case Study: Menderjan Watershed, Iran)
497
Application of Gustafson-Kessel clustering algorithm for detecting fault through seismic attributes
498
Application of H NMR spectroscopy method for determination of characteristics of thin layers of water adsorbed on the surface of dispersed and porous adsorbents
499
Application of H2O as the Green Solvent for the Synthesis of Phosphonates via Multicomponent Reactions
500
Application of H2O2 and H2O2/Fe0 in removal of Acid Red 18 dye from aqueous solutions
501
Application of H2O2 and H2O2/Fe0 in removal of Acid Red 18 dye from aqueous solutions
502
Application of h∞ robust control to the RM12 jet engine
503
APPLICATION OF HAAR WAVELETS IN SOLVING NONLINEAR FRACTIONAL FREDHOLM INTEGRO-DIFFERENTIAL EQUATIONS
504
Application of habitat suitability modelling to tracking data of marine animals as a means of analyzing their feeding habitats
505
Application of habitat suitability modelling to tracking data of marine animals as a means of analyzing their feeding habitats
506
Application of HACCP principles in drinking water treatment Original Research Article
507
Application of HACCP to identify hygiene risks in the home
508
Application of HACCP to water reuse in the food industry
509
Application of h-adaptive FEM and Zarkaʹs approach to analysis of shakedown problems
510
Application of hafnium hydride control rod to large sodium cooled fast breeder reactor
511
Application of Hair Follicle Bulge Stem Cells in Wound Healing
512
application of hair follicle bulge stem cells in wound healing
513
Application of hair-mercury analysis to determine the impact of a seafood advisory
514
Application of Half Mini DMA for sub 2 nm particle size distribution measurement in an electrospray and a flame aerosol reactor
515
Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates.
516
Application of Hamamatsu MPPCs to T2K neutrino detectors
517
Application of Hamamatsu MPPCs to T2K neutrino detectors
518
Application of Hammett Constant for Prediction of Acidity Properties of Substituted Benzoic Acid
519
Application of Hammett Constant for Prediction of Acidity Properties of Substituted Benzoic Acid
520
Application of handheld and portable spectrometers for screening acrylamide content in commercial potato chips
521
Application of hard coatings for blanking and piercing tools
522
Application of hard coatings in aluminium die casting — soldering, erosion and thermal fatigue behaviour
523
Application of Harmonic Analysis of Water Levels to Determine Vertical Hydraulic Conductivities in Clay-Rich Aquitards
524
Application of harmonic pulse testing to water–oil displacement
525
Application of harmony search algorithm to evaluate performance of diamond wire saw
526
Application of Harmony Search algorithm to the solution of groundwater management models
527
Application of Harris Hawks Optimization Algorithm and APSO-CLUSTERING in Predicting the Stock Market
528
Application of Harvey–Garabedian model for describing bacterial removal in Sand Abstraction Systems associated with ephemeral rivers
529
Application of Hatim and Mason’s Ideological Analysis on Two Persian Translations of the Catcher in the Rye
530
Application of hazard analysis – Critical control point (HACCP) principles to primary production: What is feasible and desirable?
531
Application of hazard analysis and critical control points (HACCP) to the processing of compost used in the cultivation of button mushroom
532
Application of hazard analysis critical control points (HACCP) system to vacuum-packed sauced pork in Chinese food corporations
533
Application of Hazard Analysis of Critical Control Points (HACCP) Method to Describe Critical Points in Healthcare Waste Management of Razi Hospital in Ghaemshahr, Iran During COVID-19 Pandemic in 2020
534
Application of Hazard and Operability Analysis (HAZOP) Method for Risk Analysis in CGS Station
535
Application of Hazard and Operability Study (HAZOP) in Evaluation of Health, Safety and Environmental (HSE) Hazards
536
Application of Hazard Based Model for Housing Location Based on Travel Distance to Work
537
Application of HBIM as a Research Tool for Historical Building Assessment
538
Application of HCl solutions for recovering the high purity metal from tin scrap by electrorefining
539
Application of HDF5 in long-pulse quasi-steady state data acquisition at high sampling rate
540
Application of He Chengtianʹs interpolation to Bethe equation
541
Application of He’s homotopy perturbation method for Laplace transform
542
Application of He’s homotopy perturbation method for Schrodinger equation
543
Application of He’s homotopy perturbation method to conservative truly nonlinear oscillators
544
Application of He’s homotopy perturbation method to solve a diffusion-convection problem
545
Application of He’s methods to nonlinear chemistry problems
546
Application of He’s semi-inverse method to the nonlinear Schrödinger equation
547
Application of He’s variational iteration method for solution of the family of Kuramoto–Sivashinsky equations
548
Application of He’s variational iteration method for solution of the family of Kuramoto–Sivashinsky equations
549
Application of He’s variational iteration method for solving the reaction–diffusion equation with ecological parameters
550
Application of He’s variational iteration method to Helmholtz equation
551
Application of He’s variational iteration method for solution of differential-algebraic equations
552
Application of headspace single-drop microextraction coupled with gas chromatography for the determination of short-chain fatty acids in RuO4 oxidation products of asphaltenes
553
Application of headspace solid phase microextraction to qualitative and quantitative analysis of tobacco additives in cigarettes
554
Application of headspace solid-phase microextraction and gas chromatography–mass spectrometry for detection of the chemical warfare agent bis(2-chloroethyl) sulfide in soil
555
Application of head-space solid-phase microextraction coupled to comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the determination of multiple pesticide residues in tea samples Original Research Article
556
Application of headspace solid-phase microextraction to the determination of sulphur compounds with low volatility in wines
557
Application of Headspace Solid-phase Microextraction to the Durian (Durio zibethinus) Variety D24 Volatile Compounds
558
Application of headspace solvent microextraction to the analysis of mononitrotoluenes in waste water samples
559
Application of headspace—solid phase microextraction and multivariate analysis for plant oils differentiation
560
Application of headspace-solid-phase microextraction and HPLC for the analysis of the aroma volatile components of treacle and determination of its content of 5-hydroxymethylfurfural (HMF)
561
Application of Health Belief Model in predicting preventive behaviors against cardiovascular disease in individuals at risk
562
Application of Health Belief Model in Prevention of Osteoporosis among Primary School Girl Students
563
Application of Health Belief Model to assess Knowledge and Attitude of Women Regarding Preconception Care
564
Application of Health Technology Assessment (HTA) to Evaluate New Laboratory Tests in a Health System: A Case Study of Bladder Cancer Testing
565
Application of Health Theories and Models of Health Education and Promotion in Nutritional Interventions for Pregnant Women in Iran: A Systematic Review
566
Application of Healthy Heart program in the two semi-rural areas in Eskişehir
567
Application of heat- and steam-generating sheets to the lumbar or abdominal region affects autonomic nerve activity
568
Application of heat conduction calorimetry to high explosives
569
Application of heat flux transducers to determine perioperative heat exchange
570
Application of heat interchange systems to enhance the performance of ammonia reactors
571
Application of heat-resistant titanium-based compressor disk with dual structure
572
Application of heat-resistant titanium-based compressor disk with dual structure
573
Application of heavy stable isotopes in forensic isotope geochemistry: A review
574
Application of HEC-RAS 4.0 temperature model to estimate groundwater contributions to Swan Creek, Ontario, Canada
575
Application of hedonic price modeling to consumer packaged goods using store scanner data
576
Application of helio-aero-gravity concept in producing energy and suppressing pollution
577
Application of hemicelluloses precipitated via ethanol treatment of pre-hydrolysis liquor in high-yield pulp
578
Application of HEMT for multiplexing large arrays of high impedance LTDs
579
Application of HEMT for multiplexing large arrays of high impedance LTDs
580
Application of heparinized cellulose affinity membranes in recombinant adeno-associated virus serotype 2 binding and delivery
581
Application of Herbal Exudates in Traditional Persian Medicine
582
Application of herbal rectal suppositories beyond intestinal disorders in Persian medicine
583
Application of Heʹs amplitude frequency formulation to a nonlinear oscillator with discontinuity
584
Application of Heʹs exp-function method for nonlinear evolution equations
585
Application of He's homotopy Perturbation Method for Solving Sivashinsky Equation
586
Application of Heʹs variational iteration method and Adomianʹs decomposition method to the fractional KdV Burgers Kuramoto equation
587
Application of Heʹs variational iteration method for solving the Cauchy reaction–diffusion problem
588
Application of Heʹʹs Variational Iteration Method for solving the Equation Governing the Unsteady Flow of a Polytropic Gas
589
Application of Heʹs variational iteration method to nonlinear Jaulent–Miodek equations and comparing it with ADM
590
Application of Heston model and its solution to German DAX data
591
Application of heterogeneous catalysts for transesterification of refined palm oil in ultrasound-assisted reactor
592
Application of heterogeneous catalytic ozonation process for treatment of high toxic effluent from a pesticide manufacturing plant
593
Application of Heterogeneous Catalytic Ozonation Process with Magnesium Oxide Nanoparticles for Toluene Degradation in Aqueous Environments
594
Application of heterogeneous mesospheric ion-chemistry model to MST radar echoes over low latitude Original Research Article
595
Application of heterogeneous vacancy solution theory to characterization of microporous solids Original Research Article
596
Application of heteroleptic iridium complexes with fluorenyl-modified 1-phenylisoquinoline ligand for high-efficiency red polymer light-emitting devices
597
Application of heuristic and hybrid-GASA algorithms to tool-path optimization problem for minimizing airtime during machining
598
Application of heuristic and hybrid-GASA algorithms to tool-path optimization problem for minimizing airtime during machining
599
Application of heuristic methods for conformance test selection
600
Application of Heuristics to Solve Scheduling Problems of Intermediate Transfer Policies in Multiproduct Chemical Batch Processes
601
Application of hexadentate Schiff base metal complexes as crosslinking agents for diglycidyl ether of bisphenol A
602
Application of HF Doppler measurements for the investigation of internal atmospheric waves in the ionosphere Original Research Article
603
Application of HF radar currents to oil spill modelling
604
Application of HGSO to security based optimal placement and parameter setting of UPFC
605
Application of Hidden Markov Model to Identify Disease Progression Process in Medical Research
606
Application of hidden Markov models for signature verification
607
Application of hierarchical biphasic growth models to long-term data for snapping turtles
608
Application of hierarchical biphasic growth models to long-term data for snapping turtles
609
Application of hierarchical clustering on principal components to evaluate the performance of justice system by judicial indicators
610
Application of hierarchical linear modelling to the study of trajectories of behavioural development
611
Application of hierarchical matrices to boundary element methods for elastodynamics based on Greenʹs functions for a horizontally layered halfspace
612
Application of hierarchical thermodynamic interactions to the protonation equilibria of organic polyprotic acids Original Research Article
613
Application of HIGEE process intensification technology in synthesis of petroleum sulfonate surfactant
614
Application of high Cu compost to Swiss chard and basil
615
Application of high density steam flash-explosion in protein extraction of soybean meal Original Research Article
616
Application of high electric field (HEF) on the shelf-life extension of emblic fruit (Phyllanthus emblica L.) Original Research Article
617
Application of High Electric Field Pulses in Coconut Milk Processing
618
Application of High Energy and Protein Diets in Combination with a Live Avirulent Escherichia coli F4 Vaccine Against Post-Weaning Diarrhea
619
Application of high energy ignition systems to engines
620
Application of high frame-rate neutron radiography to liquid-metal two-phase flow research
621
Application of high frame-rate neutron radiography to liquid-metal two-phase flow research
622
Application of high harmonic radiation in surface science
623
Application of high hydrostatic pressure to decontaminate green onions from Salmonella and Escherichia coli O157:H7 Original Research Article
624
Application of High Moment Theory to the Plane Couette Flow
625
Application of high order derivative spectrophotometry to resolve the spectra overlap between BG and MB for the simultaneous determination of them: Ruthenium nanoparticle loaded activated carbon as adsorbent
626
Application of high performance anion exchange-pulsed amperometric detection to measure the activity of key sucrose metabolising enzymes in sugarcane
627
Application of high performance liquid chromatography coupled to on-line solid-phase extraction-nuclear magnetic resonance spectroscopy for the analysis of degradation products of V-class nerve agents and nitrogen mustard
628
Application of high performance liquid chromatography for the profiling of complex chemical mixtures with the aid of chemometrics
629
Application of high performance liquid chromatography with inductively coupled plasma mass spectrometry (HPLC–ICP-MS) for determination of chromium compounds in the air at the workplace
630
Application of high performance polypropylene fibers in concrete lining of water tunnels
631
Application of high porosity metal foams as air-cooled heat exchangers to high heat load removal systems
632
Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides
633
Application of high pressure argon treatment to maintain quality of fresh-cut pineapples during cold storage Original Research Article
634
Application of High Pressure Processing Technology for Dairy Food Preservation - Future Perspective: A Review
635
Application of high pressure processing to reduce verotoxigenic E. coli in two types of dry-fermented sausage
636
Application of high pressure technology in the fruit juice processing: benefits perceived by consumers Original Research Article
637
Application of high pressure, induced by water freezing, to the direct asymmetric aldol reaction
638
Application of high rate nitrifying trickling filters for potable water treatment
639
Application of high resolution DEM data to detect rock damage from geomorphic signals along the central San Jacinto Fault
640
Application of high resolution land use and land cover data for atmospheric modeling in the Houston–Galveston metropolitan area, Part I: Meteorological simulation results
641
Application of high resolution land use and land cover data for atmospheric modeling in the Houston–Galveston Metropolitan area: Part II: Air quality simulation results
642
Application of high resolution X-ray computed tomography to mineral deposit origin, evaluation, and processing
643
Application of High Resolution-Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS): Determination of trace elements in tea and tisanes
644
Application of High Spatial Resolution Laser Ablation ICP-MS to Crystal-Melt Trace Element Partition Coefficient Determination
645
Application of high spatial resolution satellite imagery for riparian and forest ecosystem classification
646
Application of high speed imaging as a novel tool to study particle dynamics in tubular membrane systems
647
Application of high speed slurry flow finishing method for finishing of inner wall of fine hole die: Effects of the hardness of die material on the polishing characteristics
648
Application of high strength MnMoNi steel to pressure vessels for nuclear power plant
649
Application of high strength MnMoNi steel to pressure vessels for nuclear power plant Original Research Article
650
Application of high temperature mass spectrometry and work function measurement to evaluation of thermochemical performance of ceramic breeders
651
Application of high temperature superconductors for fusion
652
Application of high velocity impact welding at varied different length scales
653
Application of high voltage gradient zinc oxide elements to SF6 gas insulated surge arresters for 22 kV-765 kV power systems
654
Application of high-energy synchrotron radiation for texture studies
655
Application of high-energy X-rays and Pair-Distribution-Function analysis to nano-scale structural studies in catalysis
656
Application of higher order statistics/spectra in biomedical signals—A review
657
Application of higher-order finite element for elastic stability analysis of laminated cross-ply oval cylindrical shells
658
Application of higher-order structural theory to bending and free vibration analysis of sandwich plates with CNT reinforced composite facesheets
659
Application of high-frame-rate neutron radiography to steam explosion research
660
Application of high-frame-rate neutron radiography to steam explosion research
661
Application of high-frequency ultrasound for the detection of surgical anatomy in the rodent abdomen
662
Application of high-k dielectric stacks charge trapping for CMOS technology
663
Application of high-level fuzzy Petri nets to educational grading system
664
Application of highly sensitive, modified glass substrate-based immuno-PCR on the early detection of nasopharyngeal carcinoma
665
Application of highly silicon-doped marker layers in the investigation of unintentional doping in GaN on sapphire
666
Application of highly silicon-doped marker layers in the investigation of unintentional doping in GaN on sapphire
667
Application of high-order difference methods for the study of period doubling bifurcations in nonlinear oscillators
668
Application of high-order spectral method for the time fractional mobile/immobile equation
669
Application of high-performance anion-exchange chromatography with pulsed amperometric detection and statistical analysis to study oligosaccharide distributions – a complementary method to investigate the structure and some properties of alginates
670
Application of high-performance anion-exchange chromatography with pulsed amperometric detection to compare the kinetic properties of β-glucosidase on oligosaccharides from lichenase digested barley β-glucan Original Research Article
671
Application of high-performance capillary electrophoresis to the purification process of Escherichia coli K4 polysaccharide
672
Application of high-performance liquid chromatography based measurements of lipophilicity to model biological distribution
673
Application of high-performance liquid chromatography hyphenated techniques for identification of degradation products of cefpodoxime proxetil
674
Application of high-performance liquid chromatography to the characterization of the betalain pigments in prickly pear fruits
675
Application of high-performance liquid chromatography with amperometric and coulometric detection to the analysis of SZ1677, a new neuromuscular blocking agent, and its two derivatives
676
Application of high-performance liquid chromatography with isotope-ratio mass spectrometry for measuring low levels of enrichment of underivatized materials
677
Application of high-performance liquid chromatography with ultraviolet diode array detection and refractive index detection to the determination of class composition and to the analysis of gasoline
678
Application of high-performance liquid chromatography–electrospray ionization time-of-flight mass spectrometry for analysis and quality control of Radix Astragali and its preparations
679
Application of high-performance liquid chromatography–mass spectrometry to detection of diuretics in human urine
680
Application of high-performance liquid chromatography–nuclear magnetic resonance coupling to the identification of limonoids from mahogany tree (Switenia macrophylla, Meliaceae) by stopped-flow 1D and 2D NMR spectroscopy
681
Application of high-performance liquid chromatography–tandem mass spectrometry to the identification of biologically active peptides produced by milk fermentation and simulated gastrointestinal digestion
682
Application of high-pressure processing and nisin to mechanically recovered poultry meat for microbial decontamination
683
Application of high-pressure treatment on alfalfa (Medicago sativa) and mung bean (Vigna radiata) seeds to enhance the microbiological safety of their sprouts
684
Application of high-pressure waterjets for comminution
685
Application of High-Resolution Melting (HRM) Technique Towards the Detection of Asymptomatic Malaria in a Malaria Endemic Area of Southeastern Iran Under Elimination Program
686
Application of high-resolution radiochromic film dosimetry in verifying a small-field stereotactic radiosurgery plan
687
Application of High-Resolution Remote-Sensing Data for Land Use Land Cover Mapping of University Campus
688
Application of high-resolution sequence stratigraphy in improving the precision of reservoir prediction
689
Application of high-resolution stereo satellite images to detailed landslide hazard assessment
690
Application of high-resolution visible sharpening of partly cloudy pixels in Meteosat Second Generation infrared imagery
691
Application of high-resolution X-ray diffraction to study strain status in Si1−xGex/Si1−yGey/Si (001) heterostructures
692
Application of high-resolution, interferometric DEMs to geomorphic studies of fault scarps, Fish Lake Valley, Nevada–California, USA
693
Application of high-speed counter-current chromatography combined with macroporous resin for rapid enrichment and separation of three anthraquinone glycosides and one stilbene glycoside from Rheum tanguticum
694
Application of high-speed counter-current chromatography coupled with a reverse micelle solvent system to separate three proteins from Momordica charantia
695
Application of high-speed counter-current chromatography coupled with high-performance liquid chromatography–diode array detection for the preparative isolation and purification of hyperoside from Hypericum perforatum with online purity monitoring
696
Application of high-speed counter-current chromatography for preparative separation of cyclic peptides from Vaccaria segetalis
697
Application of high-speed counter-current chromatography for the isolation of 9′-cis-neoxanthin from fresh spinach
698
Application of high-speed counter-current chromatography to the preparative separation and purification of baicalin from the Chinese medicinal plant Scutellaria baicalensis
699
Application of High-Speed Laser Polarimetry to Noncontact Detection of Phase Transformations in Metals and Alloys at High Temperatures
700
Application of high-speed PIV and image processing to measuring particle velocity and concentration in a horizontal pneumatic conveying with dune model
701
Application of High-speed Solenoid Valve to the Semi-active Control of Landing Gear
702
Application of High-Speed, High-Accuracy Dacs for Generation of Multiple Channels
703
Application of high-strength/superworkable concrete to thin-wall prestressed concrete products
704
Application of high-strength/superworkable concrete to thin-wall prestressed concrete products
705
Application of high-temperature permanent magnets Sm(Co, Fe, Cu, Zr)Z in PPM focusing system
706
Application of high-temperature rapid catalytic technology to forecast the volumetric stability behavior of containing steel slag mixtures
707
Application of high-temperature superconducting coil for internal ring devices
708
Application of High-Throughput Findings in Medicine
709
Application of Highwall Mining System to Recover Residual Coal in End-walls
710
Application of Hilbert spectroscopy to pulsed far-infrared radiation
711
Application of Hilbert-Huang transform and support vector machine for detection and classication of voltage sag sources
712
Application of histochemical and immunohistochemical techniques for detection of lung tissue in cooked sausage
713
Application of histograms in evaluation of large collections of gas chromatographic retention indices
714
Application of histological method for detection of unauthorized tissues in meat sausage
715
Application of H-likelihood to factor analysis models with binary response data
716
Application of HOF·CH3CN to the synthesis of glycosyl sulfones
717
Application of Holder’s inequality in information theory
718
Application of Holistic Nursing in Uremic Patients with Hematodialysis Related Malnutrition
719
Application of holistic thermodynamic indicators
720
Application of hollow fiber liquid phase microextraction coupled with high-performance liquid chromatography for the study of the osthole pharmacokinetics in cerebral ischemia hypoperfusion rat plasma
721
Application of hollow fiber liquid phase microextraction for pinic acid and pinonic acid analysis from organic aerosols Original Research Article
722
Application of hollow fiber liquid phase microextraction for the determination of insecticides in water
723
Application of hollow fiber liquid-phase microextraction in identification of oil spill sources
724
Application of hollow fiber membrane contactor for the removal of carbon dioxide from water under liquid–liquid extraction mode
725
Application of hollow fiber-based liquid-phase microextraction (HF-LPME) for the determination of acidic pharmaceuticals in wastewaters
726
Application of hollow fibre liquid phase microextraction for the multiresidue determination of pesticides in alcoholic beverages by ultra-high pressure liquid chromatography coupled to tandem mass spectrometry
727
Application of holographic sub-wavelength diffraction gratings for monitoring of kinetics of bioprocesses
728
Application of Home Total Parenteral Nutrition
729
Application of homogeneous and heterogeneous cation-exchange membranes in coagulant recovery from water treatment plant residuals using Donnan membrane process
730
Application of homogenization and large deviations to a parabolic semilinear equation
731
Application of homogenization heat treatments to improve continuous-annealing furnace roller fractures
732
Application of homogenization method to justification of 1-D model for beam of periodic structure having initial stresses
733
Application of homogenous continuous Ant Colony Optimization algorithm to inverse problem of one-dimensional coupled radiation and conduction heat transfer
734
Application of homology theory to topology optimization of three-dimensional structures using genetic algorithm Original Research Article
735
Application of homotopic methods to static flexible pipe and cable problems
736
Application of homotopy analysis method and inverse solution of a rectangular wet fin
737
Application of homotopy analysis method for natural convection of Darcian fluid about a vertical full cone embedded in pours media prescribed surface heat flux
738
Application of Homotopy Analysis Method to Fredholm and Volterra integral equations
739
Application of Homotopy perturbation method for fuzzy integral equations
740
Application of Homotopy Perturbation Method for Solving a Nonlinear System of PDEs Arising in Magnetic Field
741
Application of Homotopy Perturbation Method for Solving Brinkman Momentum Equation for Fully Developed Forced Convection in a Porous Saturated Channel
742
Application of homotopy perturbation method for solving hybrid fuzzy differential equations
743
Application of homotopy perturbation method for solving nonlinear fractional heat-like equations using Sumudu transform
744
Application of homotopy perturbation method for systems of Volterra integral equations of the first kind
745
Application of Homotopy Perturbation Method to an SIR Epidemic Model
746
Application of Homotopy Perturbation Method to Nonlinear Equations Describing Cocurrent and Countercurrent Imbibition in Fractured Porous Media
747
Application of homotopy perturbation method to nonlinear wave equations
748
Application of Homotopy Perturbation Method to One-dimensional Transient Single-phase EM Heating Model
749
Application of Homotopy Perturbation Method To Telegraph Equation
750
APPLICATION OF HOMOTOPY PERTURBATION TRANSFORM METHOD TO LINEAR AND NON-LINEAR SPACE-TIME FRACTIONAL REACTION-DIFFUSION EQUATIONS
751
Application of homotopy-Padé technique in limit analysis of circular plates under arbitrary rotational symmetric loading using von-Mises yield criterion
752
Application of homotopy-perturbation and variational iteration methods to nonlinear heat transfer and porous media equations
753
Application of homotopy-perturbation method to fractional IVPs
754
Application of Honey to Reduce Oxidation in Soybean Oil
755
Application of Hopf bifurcation theory to rotor-bearing systems with consideration of turbulent effects
756
APPLICATION OF HOPF S LEMMA ON CONTACT CR-WARPED PRODUCT SUBMANIFOLDS OF A NEARLY KENMOTSU MANIFOLD
757
Application of Hopfʹs lemma on contact CR-warped product submanifolds of a nearly Kenmotsu manifold
758
Application of Horizon Sensor Measurements in Kalman Filtering Techniques for On-Board Orbit Navigation During Aerobraking
759
Application of Hormetic UV-C for Delayed Ripening and Reduction of Rhizopus Soft Rot in Tomatoes: the Effect of Tomatine on Storage Rot Development
760
Application of Hormonal and Single Multiplex PCR Assays for Detection of Freemartinism in a Horned Goat
761
Application of horseradish peroxidase modified nanostructured Au thin films for the amperometric detection of 4-chlorophenol
762
Application of hot isostatic pressing for consolidation of n-type silicon–germanium alloys prepared by mechanical alloying
763
Application of hot isostatic pressing for consolidation of n-type silicon–germanium alloys prepared by mechanical alloying
764
Application of hot platinum microelectrodes for determination of flavonoids in flow injection analysis and capillary electrophoresis Original Research Article
765
Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity
766
Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity
767
Application of Hot Strength and Ductility Test to Optimization of Secondary Cooling System in Billet Continuous Casting Process Original Research Article
768
Application of hot-melt coating for controlled release of propranolol hydrochloride pellets
769
Application of hp-adaptive BE/FE methods to elastic scattering Original Research Article
770
Application of HPEM to Investigate the Response and Stability of Nonlinear Problems in Vibration
771
Application of HPLC and HPTLC for the Simultaneous Determination of Cefixime Trihydrate and Ambroxol Hydrochloride in Pharmaceutical Dosage Form
772
Application of HPLC coupled with DAD, APcI-MS and NMR to the analysis of lutein and zeaxanthin stereoisomers in thermally processed vegetables
773
Application of HPLC to study the kinetics of a branched bi-enzyme system consisting of hypoxanthine-guanine phosphoribosyltransferase and xanthine oxidase—an important biochemical system to evaluate the efficiency of the anticancer drug 6-mercaptopurine i
774
Application of HPLC with electrochemical detection for the determination of low levels of antioxidants
775
Application of HPLC with electrochemical detection for the determination of low levels of antioxidants
776
APPLICATION OF HPLC-PDA METHOD USINGTWO DIFFERENT EXTRACTION PROCEDURES FOR THE DETERMINATION OF ALKYLRESORCINOLS IN CEREALS
777
Application of HPM and HAM to the First Form of Blasius Equation
778
Application of H-Point Standard Addition Method and Multivariate Calibration Methods to the Simultaneous Kinetic-Potentiometric Determination of Hydrogen Peroxide and Peracetic Acid
779
Application of H-point standard additions method to spectrophotometric and spectrofluorimetric determinations of glafenine and glafenic acid in mixtures
780
Application of HPTLC for simultaneous estimation of ambroxol hydrochloride and roxithromycin in pharmaceutical dosage forms
781
Application of HS Metaheuristic Algorithm in Designing a Mathematical Model for Forecasting P/E in the Panel Data Approach
782
Application of human amniotic mesenchymal cells as an allogeneic transplantation cell source in bone regenerative therapy
783
Application of Human Computer Interaction in Developing an IT-Supported Design Collaboration Process
784
Application of human development index to measurement of deprivations among urban households in Minna, Nigeria
785
Application of human error theories for the process improvement of Requirements Engineering
786
Application of Human Hazop Technique for Identifying Human Error in a Flour Company
787
Application of human thermal load into unsteady condition for improvement of outdoor thermal comfort
788
Application of humidity sensors and an interactive device
789
Application of hurdle model with random effects for evaluating the balance improvement in stroke patients
790
Application of hurdle technology for the development of Caprine keema and its stability at ambient temperature
791
Application of H–W boundary condition in dam–reservoir interaction problem
792
Application of Hyaluronic Acid for Treatment of Interdental Papillary Deficiency: A Systematic Review and Meta-Analysis
793
Application of hybrid case-based reasoning for enhanced performance in bankruptcy prediction
794
Application of Hybrid Cells in Series Model in the Pollution Transport through Layered Material
795
Application of Hybrid Density Functional Theory in Calculation of Edge-to-Face Interactions of Receptor-Ligand System
796
Application of hybrid fuzzy logic proportional plus conventional integral-derivative controller to combustion control of stoker-fired boilers
797
Application of hybrid image features for fast and non-invasive classification of raisin Original Research Article
798
Application of hybrid metaheuristics in sensor management
799
Application of hybrid modeling and control techniques to desalination plants Original Research Article
800
Application of hybrid neural particle swarm optimization algorithm for prediction of MMP
801
Application of Hybrid Polymer as a Two Dimensional Grating and It’s Lasing Characteristic
802
Application of hybrid system control method for real-time power system stabilization
803
Application of hybrid systems techniques for cleaning and replacement of a RO membrane Original Research Article
804
Application of hybrid systems to the treatment of meat industry wastewater Original Research Article
805
Application of hybrid Trefftz finite element method to non-linear problems of minimal surface
806
Application of Hybrid Wavelet-Fractal Approach for Denoising and Spatial Modeling of Environmental Pollution
807
Application of Hydraulic Flow Unit Technique for Permeability Prediction in one Iranian Gas Reservoirs, Case Study
808
Application of hydrazinium monoformate as new hydrogen donor with Raney nickel: a facile reduction of nitro and nitrile moieties
809
Application of hydrocarbon mixtures in small refrigerating and cryogenic machines
810
Application of hydrocarbon plasmas for modifying near-surface characteristics of bearing steel
811
Application of hydrocarbon—fluorocarbon interactions in membrane-based gas separations Original Research Article
812
Application of hydrocyclone for removal of yeasts from alcohol fermentations broth
813
Application of hydrodynamics to sub-basin-scale static and dynamic reservoir models
814
Application of Hydro-Economic Model in Optimal Distribution of Agricultural Water under Drought Conditions (Case Study: Irrigation Networks Downstream of Zayandehrud Dam)
815
Application of Hydro-Economic Model in Optimal Distribution of Agricultural Water under Drought Conditions (Case Study: Irrigation Networks Downstream of Zayandehrud Dam)
816
Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete
817
Application of hydrogen analysis by neutron imaging plate method to Zircaloy cladding tubes
818
Application of hydrogen influenced cohesive laws in the prediction of hydrogen induced stress cracking in 25%Cr duplex stainless steel
819
Application of Hydrogen Producing Microorganisms in Radiotherapy: An Idea
820
Application of hydrogen—palladium and deuterium—palladium electrodes in the coulometric—potentiometric determination of bases in some dipolar aprotic solvents
821
Application of hydrogen-permselective Pd-based membrane in an industrial single-type methanol reactor in the presence of catalyst deactivation
822
Application of hydrogen-storage alloy electrode in electrochemical reduction of glucose
823
Application of Hydrological Balance Approach in the Study of Surface Water-Groundwater Exchange (Case Study: Zayandehrood River)
824
Application of hydrological models with increasing complexity to subarctic catchments
825
Application of hydrolytic kinetic resolution (HKR) in the synthesis of bioactive compounds
826
Application of hydrophilic interaction chromatography for the analysis of polar contaminants in food and environmental samples
827
Application of hydrophilic ionic liquid treatment to the morphological observations of hydrated porous ceramic green bodies
828
Application of hydrophilic ionic liquids as co-solvents in chloroperoxidase catalyzed oxidations
829
Application of hydrophilic macromolecules on thin film composite polyamide membranes for performance restoration Original Research Article
830
Application of hydrophilic–lipophilic balance (HLB) number to optimize a compatible non-ionic surfactant for dried aerial conidia of Beauveria bassiana
831
Application of hydrophobic anion-exchange phases in capillary electrochromatography
832
Application of hydrophobic extractant in aqueous two-phase systems for selective extraction of cobalt, nickel and cadmium
833
Application of hydrostatic integration parameter for free-forging and rolling
834
Application of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System
835
Application of hydrothermal reaction to conversion of plant-origin biomasses into acetic and lactic acids
836
Application of hydrothermal treatment to affect the fermentability of Pinus radiata pulp mill effluent sludge
837
Application of hydrotreated vegetable oil from triglyceride based biomass to CI engines – A review
838
Application of hydrotropic solubilization in spectrophotometric analysis of Esomeprazole and Itopride pharmaceutical combined tablet dosage forms
839
Application of hydroxy sodalite films as novel water selective membranes
840
Application of hydroxyapatite and cement kiln dust mixture in adsorption of lead ions from aqueous solution
841
APPLICATION OF HYDROXYAPATITE IN PROTEIN PURIFICATION
842
Application of HYDRUS-1D model for simulating water and nitrate leaching from continuous and alternate furrow irrigated rapeseed and maize fields
843
Application of hyperdispersant to the cathode diffusion layer for direct methanol fuel cell
844
Application of hyperelastic models in mechanical properties prediction of mouse oocyte and embryo cells at large deformations
845
Application of Hyperelastic-based Active Mesh Model in Cardiac Motion Recovery
846
Application of hypergraph theory in chemistry Original Research Article
847
Application of hyper-molecular dynamics to self-interstitial diffusion in α-iron
848
Application of hypersingular integral equation method to three-dimensional crack in electromagnetothermoelastic multiphase composites
849
Application of hyperspectral vegetation indices to detect variations in high leaf area index temperate shrub thicket canopies
850
Application of Hyperstatic Reaction Method for Designing of Tunnel Permanent Lining, Part I: 2D Numerical Modelling
851
Application of Hyperstatic Reaction Method for Designing of Tunnel Permanent Lining, Part II: 3D Numerical Modelling
852
Application of hypertext technology to assist maintenance on the shop floor
853
Application of hysteresis functions in vibration problems
854
Application of I.E. to the plan of production line in factory
855
APPLICATION OF IADPSO APPROACH FOR TNEP PROBLEM CONSIDERING OF LOSS AND UNCERTAINTY IN LOAD GROWTH
856
Application of IBES process to a zn sulphide concentrate: Effect of Cu2+ ion
857
APPLICATION OF ICA TECHNIQUE TO PCA BASED RADAR TARGET RECOGNITION
858
Application of ICP-MS for the Assessment of thorium excretion in urine
859
Application of ICP-MS method of determination of 15 elements in honey with chemometric approach for the verification of their authenticity
860
Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes
861
Application of ICTs in Nigerian Secondary Schools
862
Application of ID3 algorithm in knowledge acquisition for tolerance design
863
Application of ideal temperature gradient technology to optimize the chemical exchange and distillation process of boron isotopes separation by (CH3)2O-BF3 complex
864
Application of IEEE standard 519-1992 harmonic limits for revenue billing meters
865
Application of image analysis and image simulation for quantitative characterization of scale spallation during cyclic oxidation of a Pt-aluminide coating
866
Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering
867
Application of Image Analysis in the Characterization of Electrospun Nanofibers
868
Application of image analysis to determine design loading in flighted rotary dryers
869
Application of image analysis to measure screw speed influence on physical properties of corn and wheat extrudates Original Research Article
870
Application of image analysis to plant cell suspension cultures
871
Application of image and sound analysis techniques to monitor the condition of cutting tools
872
Application of image correction and bit-plane fusion in generalized PCA based face recognition
873
Application of Image Fusion (Object Fusion) for Forest Classification in Northern Forests of Iran
874
Application of image processing and radial basis neural network techniques for ore sorting and ore classification
875
Application of Image Processing for Investigating the Effect of Nanozeolite and Nanosponge on Flesh Firmness of Cold Stored Cantaloupe
876
Application of image processing techniques for analysis of nano- and micro-spaces in carbon materials
877
Application of Image Processing Techniques for Geometrical Simulation in Rock Slopes
878
Application of image processing techniques in air/water two phase flow
879
Application of Image Processing Techniques in Molecular Imaging of Cancer
880
Application of image processing to high resolution SEM pictures of mesophase pitch-based carbon fibers and quantitative analysis of the Structure
881
Application of image processing to STEM tomography of low-contrast materials
882
Application of image processing to STEM tomography of low-contrast materials
883
Application of Image Recognition Technology in Sports Competition
884
Application of image texture for the sorting of tea categories using multi-spectral imaging technique and support vector machine Original Research Article
885
Application of imagebased acquisition techniques for additive manufacturing using canny edge detection
886
Application of image-based brain analysis to research and clinical problems
887
Application of image-based granulometry to siliceous and calcareous estuarine and marine sediments
888
Application of image-processing to crack propagation process identification in concrete under fatigue phenomenon
889
Application of imaging plate neutron detector to neutron radiography
890
Application of imaging plate neutron detector to neutron radiography
891
Application of imaging plate technique for separate detection of 3H and 14C
892
Application of Imaging Spectrometer Data in Identifying Environmental Pollution Caused by Mining at Rodaquilar, Spain
893
Application of imaging spectroscopy to mapping canopy nitrogen in the forests of the central Appalachian Mountains using Hyperion and AVIRIS
894
Application of Imidazolium based ionic liquid Nano-emulsions for the removal of H2S from crude oil
895
APPLICATION OF IMIDAZOLYLAZO RESIN : SEPARATION OF PALLADIUM(II), SILVER(I) FROM SYNTHETIC MIXTURES, MEDICINAL AND GEOLOGICAL SAMPLES
896
Application of iminodiacetate chelating resin muromac A-1 in on-line preconcentration and inductively coupled plasma optical emission spectroscopy determination of trace elements in natural waters
897
Application of Immediate Dentoalveolar Restoration in Alveolus Compromised with Loss of Immediate Implant in Esthetic Area
898
Application of immobilized enzyme reactor in on-line high performance liquid chromatography: A review
899
Application of immobilized microorganisms in the biodegradation of alkyl sulphate and linear alkyl benzene sulphonate surfactants
900
Application of immobilized Rhodobacter sphaeroides bacteria in hydrogen generation process under semi-continuous conditions
901
Application of immobilized titanium dioxide photocatalysts for the degradation of creatinine and phenol, model organic contaminants found in NASAʹs spacecrafts wastewater streams
902
Application of immobilized upflow anaerobic sludge blanket reactor using Clostridium LS2 for enhanced biohydrogen production and treatment efficiency of palm oil mill effluent
903
Application of immobilized yeast in bacterial cellulose to the repeated batch fermentation in wine- making
904
Application of Immobilized α-Amylase onto Functionalized Calix[4]arene for the Degradation of Starch
905
Application of immune algorithm to optimal switching operation for distribution-loss minimisation and loading balance
906
Application of immune algorithms on solving minimum-cost problem of water distribution network
907
Application of immune-based optimization method for fault-section estimation in a distribution system
908
Application of Immunocytochemistry on Oral Smears: A Noninvasive Method for Early Detection of Cellular and Molecular Changes in High-Risk Populations
909
APPLICATION OF IMMUNODIAGNOSTIC ASSAYS: DETECTION OF ANTIBODIES AND CIRCULATING ANTIGENS IN HUMAN SCHISTOSOMIASIS AND CORRELATION WITH CLINICAL FINDINGS
910
Application of immunological methods for the detection of species adulteration in dairy products
911
Application of immunological methods for the determination of environmental pollutants in human biomonitoring. A review
912
Application of immunoproteomics in developing a Streptococcus iniae vaccine for olive flounder (Paralichthys olivaceus)
913
Application of impact tensile testing to welded thin sheets
914
Application of impedance spectroscopy to the study of organic multilayer devices
915
Application of Imperialist Competitive Algorithm to Optimization Problems Arising in Welding Process
916
Application of imperialist competitive optimization algorithm in power industry
917
Application of implicit function theorems to existence of solutions to ordinary differential equations with nonlocal boundary conditions
918
Application of implicit sub-time stepping to simulate flow and transport in fractured porous media
919
Application of implicit–explicit high order Runge–Kutta methods to discontinuous-Galerkin schemes
920
Application of importance-performance model in tour guides’ performance: evidence from mainland Chinese outbound visitors in Hong Kong
921
Application of importances or weight windows in MCNP4C to a geometry similar to an ITER equatorial port
922
APPLICATION OF IMPREGNATED ALMOND SHELL ACTIVATEDCARBON BY ZINC AND ZINC SULFATE FOR NITRATE REMOVALFROM WATER
923
Application of impregnation combustion method for fabrication of nanostructure CuO/ZnO composite oxide: XRD, FESEM, DRS and FTIR study
924
Application of Imprinted Synthetic Polymers in Binding Assay Development
925
Application of Improved Blocked-Off Method to Simulate the Interacting Influences of Obstacle Shape and Wall Velocity on the Turbulent Mixed Convection Flow in a Trapezoidal Cavity
926
Application of Improved EAHP on Stability Evaluation of Coal Seam Roof
927
Application of improved extension evaluation method to water quality evaluation
928
Application of Improved Fuzzy Immune PID Controller to Bending Control System Original Research Article
929
Application of Improved Grey Correlative Method in Safety Evaluation on Fully Mechanized Mining Faces
930
Application of improved grey relational projection method to evaluate sustainable building envelope performance
931
Application of Improved HMM Algorithm in Slag Detection System Original Research Article
932
Application of improved hybrid bonded FRP technique to FRP debonding prevention
933
Application of improved iodine–azide procedure for the detection of thiouracils in blood serum and urine with planar chromatography
934
Application of Improved Metabolic GM Model in Analyzing Settlement of Earth-rock Dam in the Period of Construction
935
Application of Improved PSO Algorithm in Hydraulic Pressing System Identification Original Research Article
936
Application of improved quasi-static method to high temperature gas cooled reactor simulator
937
Application of improved rapid mixing for enhanced removal of dissolved organic matter and DBPFP (disinfection by-product formation potential) control
938
Application of Improved Salp Swarm Algorithm Based on MPPT for PV Systems under Partial Shading Conditions
939
Application of impulse-thermography for non-destructive assessment of concrete structures
940
Application of impulsive synchronization to communication security
941
Application of imputation methods for missing values of PM10 and O3 data: Interpolation, moving average and K-nearest neighbor methods
942
Application of in silico modelling to estimate toxicity of migrating substances from food packaging
943
Application of in situ biosparging to remediate a petroleum-hydrocarbon spill site: Field and microbial evaluation Original Research Article
944
Application of in situ catalyst potential measurements for estimation of reaction performance: Lactose oxidation over Au and Pd catalysts
945
Application of in situ loop-mediated isothermal amplification method for detection of Salmonella in foods
946
Application of in situ oxidation-resistant coating technology to a home-made 100 kW class gas turbine and its performance analysis
947
Application of in situ zircon geochronology and accessory phase chemistry to constraining basin development during post-collisional extension: a case study from the French Massif Central
948
Application of in situ-produced cosmogenic 10Be and 26Al to the study of lateritic soil development in tropical forest: theory and examples from Cameroon and Gabon
949
Application of in vitro Culture for Resistance to Desertification
950
Application of in vitro extraction studies to evaluate element bioaccessibility in soils from a transect across the United States and Canada
951
Application of in vitro methods for selection of Lactobacillus casei strains as potential probiotics
952
Application of in vitro methods using peripheral whole blood to selecting highly susceptible individuals among common squirrel monkeys (saimiri sciureus) to bacterial lipopolysaccharides
953
Application of In Vitro Therapy for Ilarvirus Elimination in Three Prunus Species
954
Application of in vivo ESR spectroscopy to measurement of cerebrovascular ROS generation in stroke
955
Application of Incomplete Analytic Hierarchy Process and Choquet Integral to selec‎t the best Supplier and Order Allocation in Petroleum Industry
956
Application of Incremental Forming process for high customised medical product manufacturing
957
Application of incubation time approach to simulate dynamic crack propagation
958
Application of indentation as a retardation mechanism for fatigue crack growth
959
Application of independent component analysis to 1H MR spectroscopic imaging exams of brain tumours Original Research Article
960
Application of independent component analysis to dynamic contrast-enhanced imaging for assessment of cerebral blood perfusion
961
Application of index number theory to the construction of a water quality index: Aggregated nutrient loadings related to the areal extent of hypoxia in the northern Gulf of Mexico
962
Application of Indian medicinal herbs for skin problems following safety measures against COVID-19
963
Application of Indicator kriging to Evaluate the Probability of Exceeding Nitrate Contamination Thresholds
964
Application of indicial functions in bridge deck aeroelasticity
965
Application of indirect evaporative cooling to variable domestic cooling load
966
Application of indium nanowires to donor–acceptor pair luminescence
967
Application of indium tin oxide device in gold-coated magnetic iron solid support enhanced electrochemiluminescent immunosensor for determination of carcinoma embryonic antigen
968
Application of indoleacetic acid-imprinted polymer to solid phase extraction Original Research Article
969
Application of induction charging to mono-disperse aerosol generator and electric field measurement
970
Application of inductively coupled plasma mass spectrometry and high-performance liquid chromatography—with parallel electrospray mass spectrometry to the investigation of the disposition and metabolic fate of 2-, 3- and 4-iodobenzoic acids in the rat
971
Application of Inductively Coupled Plasma Mass Spectrometry to the determination of uranium isotope ratios in individual particles for nuclear safeguards
972
Application of Inductively Coupled Plasma Mass Spectrometry to the determination of uranium isotope ratios in individual particles for nuclear safeguards
973
Application of inductively coupled plasma sector field mass spectrometry for elemental analysis of urine
974
Application of inductively coupled plasma sector field mass spectrometry for low-level environmental americium-241 analysis
975
Application of inductively coupled plasma sector field mass spectrometry for low-level environmental americium-241 analysis Original Research Article
976
Application of inductively coupled plasma to CVD and PVD
977
Application of inductively coupled plasma to super-hard and decorative coatings
978
Application of inelastic X-ray scattering to the measurements of acoustic wave velocities in geophysical materials at very high pressure
979
Application of infinite dimensional linear programming to IIR filter design with time domain constraints
980
Application of infinite model predictive control methodology to other advanced controllers
981
Application of inflow control devices to heterogeneous reservoirs
982
Application of influence function method on the fretting wear of tube-to-plate contact
983
Application of information and communication technology and data sharing management scheme for the coastal fishery using real-time fishery information
984
Application of Information and Communication Technology for Dissemination of Agricultural Information among Farmers: Challenges and Opportunities
985
Application of information retrieval techniques to single writer documents
986
Application of information technology may increase the efficacy of Confidential Unit Exclusion (CUE) in blood donors
987
Application of information theory for the analysis of cogeneration-system performance
988
Application of information theory methods to food web reconstruction
989
Application of information theory methods to food web reconstruction
990
Application of information theory to DNA sequence analysis: A review
991
Application of Information Theory to Groundwater Quality Monitoring Networks
992
Application of Information—Theoretic Concepts in Chemoinformatics
993
Application of infrared detection in the recording of eyelid movements in rabbits
994
Application of infrared lock-in thermography for the quantitative evaluation of bruises on pears
995
Application of infrared photoacoustic spectroscopy in catalysis
996
Application of infrared spectroscopic imaging in specular reflection mode for determination of distribution of chemical components in urinary stones
997
Application of infrared spectroscopy and multivariate quality-control methods in PVC manufacturing Original Research Article
998
Application of infrared thermal imaging to the study of pellet solid oxide fuel cells
999
Application of infrared thermal testing and mathematical models for studying the temperature distributions of the high-speed waterjet
1000
Application of infrared thermography and geophysical methods for defect detection in architectural structures