<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Improved energy efficiency in juice production through waste heat recycling
2
Improved energy efficiency in sawmill drying system
3
Improved energy efficiency of the electrolytic evolution of hydrogen—Comparison of conventional and advanced electrode materials
4
Improved energy management method for auxiliary electrical energy saving in a passive-solar-heated residence
5
Improved energy management of chiller systems by multivariate and data envelopment analyses
6
Improved energy management of chiller systems with data envelopment analysis
7
Improved energy normalization function in rocket motor stability calculations
8
Improved energy output levels from small-scale Microbial Fuel Cells
9
Improved energy performance of a refrigerating machine using water spray upstream of the condenser
10
Improved energy performance of air cooled centrifugal chillers with variable chilled water flow
11
Improved energy performance of air-cooled chiller system with mist pre-cooling
12
Improved energy performance of air-cooled water chillers with innovative condenser coil configurations – Part I: CFD simulation
13
Improved energy performance of air-cooled water chillers with innovative condenser coil configurations – Part ΙΙ: Experimental validation
14
Improved energy resolution for VHE gamma ray astronomy with systems of Cherenkov telescopes
15
Improved energy storage properties of PbZrO3 thin films by inserting 0.88BaTiO3–0.12Bi(Mg1/2,Ti1/2)O3 layer
16
Improved engineering theory for uniform beams
17
IMPROVED ENHANCED STRAIN FOUR-NODE ELEMENT WITH TAYLOR EXPANSION OF THE SHAPE FUNCTIONS
18
Improved Entrance Optic for Global Irradiance Measurements with a Brewer Spectrophotometer
19
Improved entropy decay estimates for the heat equation
20
Improved environment radiation models Original Research Article
21
Improved environmental stability in poly(p-phenylene vinylene)/layered silicate nanocomposite
22
Improved enzymatic galactose oleate ester synthesis in ionic liquids
23
Improved enzymatic hydrolysis of lignocellulosic biomass through pretreatment with plasma electrolysis
24
Improved enzymatic hydrolysis of microcrystalline cellulose (Avicel PH101) by polyethylene glycol addition
25
Improved enzymatic hydrolysis yield of rice straw using electron beam irradiation pretreatment
26
Improved enzyme efficiency of rapeseed straw through the two-stage fractionation process using sodium hydroxide and sulfuric acid
27
Improved enzyme immobilization for enhanced bioelectrocatalytic activity of choline sensor and acetylcholine sensor
28
Improved enzyme immobilization for enhanced bioelectrocatalytic activity of glucose sensor
29
Improved equalization and joint iterative detection
30
Improved Equilibrium Optimizer using Density-based Population and Entropy Operator for Feature Selection
31
Improved equivalent viscous damping model for base-isolated structures with lead rubber bearings
32
Improved Erlang capacity of combined carrier channel assignment for hybrid FDMA/CDMA systems supporting voice and data services
33
Improved error bounds for Newton-like iterations under Chen-Yamamoto conditions Original Research Article
34
Improved error estimation of dynamic finite element methods for second-order parabolic equations
35
Improved error-table compensation of A/D converters
36
Improved erythrocyte lysis assay in microtitre plates for sensitive detection and efficient measurement of haemolytic compounds from ichthyotoxic algae
37
Improved ESD protection by combining InGaN-GaN MQW LEDs with GaN Schottky diodes
38
Improved esterification activity of Candida rugosa lipase in organic solvent by immobilization as Cross-linked enzyme aggregates (CLEAs)
39
Improved estimate of electron capture rates on nuclei during stellar core collapse
40
Improved estimate of the policy-relevant background ozone in the United States using the GEOS-Chem global model with 1/2° × 2/3° horizontal resolution over North America
41
Improved estimates for hydration free energy obtained by the reference interaction site model
42
Improved estimates for the approximation numbers of Hardy-type operators Original Research Article
43
IMPROVED ESTIMATES FOR THE ENERGY CHARACTERISTICS OF A VIBRATING ELASTIC STRUCTURE VIA THE INPUT IMPEDANCE AND MOBILITY: EXPERIMENTAL VERIFICATION
44
Improved Estimates of High-Temperature Fiber Bed Effective Emissivities from Variational Calculations
45
Improved Estimates of Hourly Insolation from GMS S-VISSR Data
46
Improved Estimates of Kinematic Wave Parameters for Circular Channels
47
Improved Estimates of Sombor Index
48
Improved estimates of the parameters of state space time series models
49
Improved estimates of tree-shade effects on residential energy use
50
Improved estimation in applications involving multiple independent goals
51
Improved Estimation in Measurement Error Models Through Stein Rule Procedure
52
Improved estimation in multiple linear regression models with measurement error and general constraint
53
Improved Estimation in Rayleigh type-II Censored Data under a Bounded Loss Utilizing a Point Guess Value
54
Improved estimation of a covariance matrix in an elliptically contoured matrix distribution
55
Improved estimation of accuracy in simple hypothesis versus simple alternative testing
56
Improved estimation of aerosol optical depth from MODIS imagery over land surfaces
57
Improved estimation of clutter properties in speckled imagery
58
Improved estimation of defocus blur and spatial shifts in spatial domain: a homotopy-based approach
59
Improved estimation of diffuse photosynthetically active radiation using two spectral models
60
Improved estimation of electricity demand function by integration of fuzzy system and data mining approach
61
Improved estimation of finite population median under two-phase sampling when using two auxiliary variables
62
Improved estimation of f-ratio in natural phytoplankton assemblages
63
Improved estimation of GFR by serum cystatin C in patients undergoing cardiac catheterization
64
Improved estimation of hyperbolic frequency modulated chirp signals
65
Improved estimation of induction machine parameters
66
IMPROVED ESTIMATION OF MEAN IN RANDOMIZED RESPONSE MODELS
67
Improved estimation of PM2.5 using Lagrangian satellite-measured aerosol optical depth
68
Improved estimation of population mean under two-phase sampling with subsampling the non-respondents
69
Improved estimation of regression parameters in measurement error models
70
Improved estimation of software project effort using multiple additive regression trees
71
Improved estimation of surface solar insolation using a neural network and MTSAT-1R data
72
Improved estimation of the covariance matrix of stock returns with an application to portfolio selection
73
IMPROVED ESTIMATION OF THE EXPECTED KULLBACK-LEIBLER DISCREPANCY IN CASE OF MISSPECIFICATION
74
IMPROVED ESTIMATION OF THE EXPECTED KULLBACK-LEIBLER DISCREPANCY IN CASE OF MISSPECIFICATION
75
Improved estimation of the scale parameter, the hazard rate parameter and the ratio of the scale parameters in exponential distributions: An integrated approach
76
Improved estimation of the slope parameter in a linear ultrastructural model when measurement errors are not necessarily normal
77
Improved estimation of the slope parameter in a linear ultrastructural model when measurement errors are not necessarily normal
78
Improved Estimation of the Soil Particle-size Distribution from Textural Data
79
Improved estimation performance using known linear constraints
80
Improved estimators for constrained Markov chain models
81
Improved estimators for fractional Brownian motion via the expectation–maximization algorithm
82
Improved estimators for simultaneous estimation of variance components
83
Improved estimators for the common mean and ordered means of two normal distributions with ordered variances
84
Improved estimators for the standard deviations of horizontal wind fluctuations
85
Improved estimators of energy models
86
Improved etch and deposit
87
Improved etching characteristics of silicon-dioxide by enhanced inductively coupled plasma
88
Improved ethanol fermentation by heterologous endoinulinase and inherent invertase from inulin by Saccharomyces cerevisiae
89
Improved ethanol production from various carbohydrates through anaerobic thermophilic co-culture
90
Improved ethanol tolerance and ethanol production from glycerol in a streptomycin-resistant Klebsiella variicola mutant obtained by ribosome engineering
91
Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis
92
Improved evaluation of potential allergens in GM food
93
Improved evaporative flux partitioning and carbon flux in the land surface model JULES: Impact on the simulation of land surface processes in temperate Europe
94
Improved event-related potential signs of selective attention after the administration of the cholecystokinin analog ceruletide in healthy persons
95
Improved evidence for the existence of an intermediate phase during hydration of tricalcium silicate
96
Improved evolutionary programming with dynamic mutation and metropolis criteria for multi-objective reactive power optimisation
97
Improved exact algorithms for MAX-SAT Original Research Article
98
Improved exclusion limits from the EDELWEISS WIMP search
99
Improved exercise tolerance and cardiac function in severe chronic heart failure patients undergoing a supervised exercise program
100
Improved experimental characterization of crystallization kinetics
101
Improved explicit equations for estimation of the friction factor in rough and smooth pipes
102
Improved explicit estimates on the number of solutions of equations over a finite field
103
Improved exploration in Hopfield network state-space through parameter perturbation driven by simulated annealing
104
Improved -exponential and -trigonometric functions
105
Improved exponential stability analysis for delayed recurrent neural networks
106
Improved exposure of isolated perimembranous ventricular septal defects
107
Improved exposure of the pulmonary arteries for thromboendarterectomy
108
IMPROVED EXPRESSION FOR THE AVERAGE BEP OF MC-CDMA SYSTEMS WITH MRC DIVERSITY RECEPTION
109
Improved expression of charge-carrier mobility in disordered semiconducting polymers considering dependence on temperature, electric field and charge-carrier density
110
Improved extracellular phytase activity in Saccharomyces cerevisiae by modifications in the PHO system
111
Improved extraction and clean-up of imidazolinone herbicides from soil solutions using different solid-phase sorbents
112
Improved extraction and identification by ultra performance liquid chromatography tandem mass spectrometry of phenolic compounds in burdock leaves
113
Improved extraction method for effective channel length of deep-submicrometre MOSFETs
114
IMPROVED EXTRACTION OF COUPLING MATRIX AND UNLOADED Q FROM S-PARAMETERS OF LOSSY RESONATOR FILTERS
115
Improved extraction of green tea components from teabags using the microwave oven
116
Improved extraction of green tea components from teabags using the microwave oven
117
Improved extraction of I–V curves from low-energy electron diffraction images
118
Improved extraction of metallofullerenes with DMF at high temperature Original Research Article
119
Improved extraction of oil from chickpea under ultrasound in a dynamic system Original Research Article
120
Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves
121
Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves
122
Improved extraction of virgin olive oil using calcium carbonate as coadjuvant extractant Original Research Article
123
Improved extraction procedures for polychlorinated biphenyls in solid samples with aqueous sodium hydroxide under autoclave conditions
124
Improved Extraction-Separation of Lanthanum/ Europium Ions by Bis(2-ethylhexyl)phosphoric Acid Using 12-Crown-4 as an Ion Selective Masking Agent
125
Improved extrapolation techniques in recursive digital filtering: a comparison of least squares and prediction
126
Improved extremal optimization for the asymmetric traveling salesman problem
127
Improved extreme learning machine for multivariate time series online sequential prediction
128
Improved extreme learning machine for multivariate time series online sequential prediction
129
Improved extreme wind speed estimation for wind engineering applications
130
Improved Facial Action Unit Recognition using Local and Global Face Features
131
Improved fairness algorithms for rings with spatial reuse
132
Improved fallows: effects of species interaction on growth and productivity in monoculture and mixed stands
133
Improved Fast Integer Sorting in Linear Space
134
Improved fast neutron spectroscopy via detector segmentation
135
Improved fast neutron spectroscopy via detector segmentation
136
Improved fast photoresponse from Al doped ZnO nanowires network decorated with Au nanoparticles
137
Improved Fastness Properties of some Novel Triarylmethane Dyes on Acrylic Fibres
138
Improved fatigue endurance in Mn-doped Bi3.25La0.75Ti3O12 thin films
139
Improved fatigue life of acrylic bone cements reinforced with zirconia fibers
140
Improved fatigue properties of ultrafine-grained copper under cyclic torsion loading Original Research Article
141
Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography–time-of-flight mass spectrometry
142
Improved fault quantification for a plate structure
143
Improved fault recovery for core based trees
144
Improved FE model to simulate interfacial bond-slip behavior in composite beams under cyclic loadings
145
Improved feasible solution algorithms for high breakdown estimation
146
Improved feature extraction and matching in urban environments based on 3D viewpoint normalization
147
Improved feature reduction in input and feature spaces
148
Improved feature selection and classification by the 2-additive fuzzy measure
149
Improved feature selection based on genetic algorithms for real time disruption prediction on JET
150
Improved FEM simulation model for tire–soil interaction
151
Improved ferrocement jacketing for restrengthening of square RC short column
152
Improved ferroelectric polarization of KSrBi2Ta3O12 thin films
153
Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence
154
Improved field emission from amorphous carbon nanotubes by surface functionalization with stearic acid Original Research Article
155
Improved field emission from multiwall carbon nanotubes with nano-size defects produced by ultra-low energy ion bombardment Original Research Article
156
Improved field emission properties of carbon nanotubes decorated with Ta layer
157
Improved field emission properties of double-walled carbon nanotubes decorated with Ru nanoparticles Original Research Article
158
Improved field emission property of graphene by laser irradiation
159
Improved field emission stability and uniformity of printed carbon nanotubes prepared using high energy-milled glass frit
160
Improved field oriented control of an LIM having joints in its secondary conductors
161
Improved field-weakening control for IFO induction motor
162
Improved filling rate and enhanced magnetic properties of Fe-filled carbon nanotubes by annealing and magnetic separation
163
Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations
164
Improved film deposition of carbon and carbon nitride materials on patterned substrates by ionized magnetron sputtering
165
Improved filtering parameter determination for the Goldstein radar interferogram filter
166
Improved fingerprint identification with supervised filtering enhancement
167
Improved finite difference calculation of magnetic field effects; inclusion of analytic asymptotics Original Research Article
168
Improved finite element computations of torque in brushless permanent magnet motors
169
Improved finite element method for stochastic problems
170
Improved finite element modelling of a cable-stayed bridge through systematic manual tuning
171
Improved Finite Impulse Response Filters for Enhanced Destriping of Geostationary Satellite Data
172
Improved finite-lattice estimates of the properties of two quantum spin models on the infinite square lattice
173
Improved Finnis–Sinclair potential for bcc vanadium solid
174
Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems
175
Improved Fischer–Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts
176
Improved fish species identification by use of lab-on-a-chip technology
177
Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling
178
Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling
179
Improved fixed center approximation of the Faddeev equations for the image system with image
180
Improved fixed parameter tractable algorithms for two “edge” problems: MAXCUT and MAXDAG
181
Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives
182
Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives
183
Improved Flexibility and Scalability by Interpreting Story Diagrams
184
Improved flexibility of thermally stable poly-lactic acid (PLA)
185
Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles
186
Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix
187
Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix
188
Improved Florence model and optimization of two-component armor against single impact or two impacts
189
Improved flow- and pressure model for cone crushers
190
Improved flow pattern map for accurate prediction of the heat transfer coefficients during condensation of R-134a in smooth horizontal tubes and within the low-mass flux range
191
Improved flow through bridge waterways by entrance rounding
192
Improved flow through bridge waterways by entrance rounding
193
Improved flowability and compactibility of spherically agglomerated crystals of ascorbic acid for direct tableting designed by spherical crystallization process
194
Improved fluorescence peak integration in the Tekran 2537 for applications with sub-optimal sample loadings
195
Improved fluorescence signal with tapered polymer optical fibers under side-illumination
196
Improved Fluorescent PCR-Based Assay for Sizing CGG Repeats at the FRAXA Locus
197
Improved flux estimation and stator-resistance adaptation scheme for sensorless control of induction motor
198
Improved flux pattern by third harmonic injection for multiphase induction machines using neural network
199
Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ
200
Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ
201
Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors
202
Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors
203
Improved Forecasting of Short Term Electricity Demand by using of Integrated Data Preparation and Input Selection Methods
204
Improved forest biomass estimates using ALOS AVNIR-2 texture indices
205
Improved forest change detection with terrain illumination corrected Landsat images
206
IMPROVED FORMULA FOR PROMPT FISSION NEUTRON SPECTRUM
207
Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames
208
Improved formulation of electron kinetic theory approach for laser ultra-short-pulse heating
209
Improved formulation of liposome-encapsulated hemoglobin with an anionic non-phospholipid
210
Improved Formulation of One-Step Approach Suitable for Initially Non-Flat Configurations and Forward Simulation Original Research Article
211
Improved formulation of W\O\W multiple emulsion for insulin encapsulation. Influence of Tthe chemical structure of insulin
212
Improved formulation, branch-and-cut and tabu search heuristic for single loop material flow system design
213
Improved Formulations of Shape Factors for the Freezing and Thawing Time Prediction of Foods
214
Improved FPT algorithm for feedback vertex set problem in bipartite tournament
215
Improved fracture toughness of boride coating developed with a diffusion annealing process
216
Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes Original Research Article
217
Improved fracture toughness of immiscible polypropylene/ethylene-co-vinyl acetate blends with multiwalled carbon nanotubes
218
Improved framework for particle swarm optimization: Swarm intelligence with diversity-guided random walking
219
Improved framework for the maintenance of the JET intershot analysis chain
220
Improved free chlorine amperometric sensor chip for drinking water applications Original Research Article
221
Improved free-interface substructures representation method
222
Improved free-standing GaN Schottky diode characteristics using chemical mechanical polishing
223
Improved Frequency Regulation in Microgrids using Metaheuristic Algorithms
224
Improved frequency selective filters
225
Improved fructan accumulation in perennial ryegrass transformed with the onion fructosyltransferase genes 1-SST and 6G-FFT
226
Improved fuel utilization in microfluidic fuel cells: A computational study
227
Improved full-vectorial beam propagation method with high accuracy for arbitrary optical waveguides
228
Improved Function and Maturation of Dendritic Cells Stimulated by Recombinant pp65 Protein: In vitro Design
229
Improved Functional Causal Likelihood-Based Causal Discovery Method for Diabetes Risk Factors
230
Improved functional mapping of the human amygdala using a standard functional magnetic resonance imaging sequence with simple modifications
231
Improved functional perturbation method for reliability analysis of randomly heterogeneous beams
232
Improved functional properties of trypsin modified by monosubstituted amino-β-cyclodextrins
233
Improved Functional Recovery of Ischemic Rat Hearts due to Singlet Oxygen Scavengers Histidine and Carnosine
234
Improved functional reserve of hypertrophied contra lateral liver after portal vein ligation in rats
235
Improved Functional Status and Quality of Life in Prohibitive Surgical Risk Patients With Degenerative Mitral Regurgitation After Transcatheter Mitral Valve Repair
236
Improved functional viual acuity after punctal occluion in dry eye patient
237
Improved functionality and control in the isomerization of a calix[4]arene-capped azobenzene
238
Improved functionalization and recovery of carboxylated carbon nanotubes using the acoustic cavitation approach
239
Improved functionalization of electrospun PLLA/gelatin scaffold by alternate soaking method for bone tissue engineering
240
Improved fuzzy clustering algorithm using adaptive particle swarm optimization for nonlinear system modeling and identification
241
Improved fuzzy control design for nonlinear Markovian-jump systems with incomplete transition descriptions
242
Improved fuzzy neural networks for solving relational equations
243
Improved fuzzy partitions for fuzzy regression models Original Research Article
244
Improved fuzzy sliding-mode control for a linear servo motor system
245
IMPROVED GA AND PSO CULLED HYBRID ALGORITHM FOR ANTENNA ARRAY PATTERN SYNTHESIS
246
Improved Gabor Filtering Application in the Identification of Handwriting
247
Improved Gagliardo–Nirenberg–Sobolev inequalities on manifolds with positive curvature
248
Improved Gamma-Heating Calculational Methods for Fast Reactors and Their Validation for Plutonium-Burning Configurations
249
Improved gas chromatographic–mass spectrometric determination of the N-methylcarbamoyl adduct at the N-terminal valine of globin, a metabolic product of the solvent N,N-dimethylformamide
250
Improved gas chromatography-flame ionization detector analytical method for the analysis of epoxy fatty acids
251
Improved gas chromatography–tandem mass spectrometry determination of pesticide residues making use of atmospheric pressure chemical ionization
252
Improved gas resource calculation using modified material balance for overpressure gas reservoirs
253
Improved gas sensing and dielectric properties of Fe doped hydroxyapatite thick films: Effect of molar concentrations
254
Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification Original Research Article
255
Improved gas sensing performances in SPR sensors by transducers activation
256
Improved gauge actions on anisotropic lattices I. Study of fundamental parameters in the weak coupling limit Original Research Article
257
Improved Gauss-Seidel projection method for micromagnetics simulations
258
Improved GC method for the determination of the active principles of Catha edulis
259
Improved GC/MS methods for measuring hourly PAH and nitro-PAH concentrations in urban particulate matter
260
Improved gelatinase a selectivity by novel zinc binding groups containing galardin derivatives
261
Improved gelling properties of whey protein isolate by addition of xanthan gum
262
Improved gene expression pattern using Epstein–Barr virus (EBV)-based plasmid and cationic emulsion
263
Improved gene transfer efficiency of a DNA-lipid-apatite composite layer by controlling the layer molecular composition
264
Improved general scaling factors and systematic tests of the SAC method for estimating correlation energies of molecules
265
Improved generalization of MCE parameter estimation with application to speech recognition
266
Improved generalized Atkin algorithm for computing square roots in finite fields
267
Improved generalized quasilinearization (GQL) method Original Research Article
268
IMPROVED GENERATION QUALITY OF A WIND DRIVEN INDUCTION GENERATOR CONNECTED TO GRID USING ARTIFICIAL NEURAL NETWORK
269
Improved generator coordinate Hartree–Fock method: application to first-row atoms
270
Improved Generic Object Retrieval In Large Scale Databases By SURF Descriptor
271
Improved genetic algorithm for design optimization of truss structures with sizing, shape and topology variables
272
Improved genetic algorithm for multidisciplinary optimization of composite laminates
273
Improved Genetic Algorithm for Power Economic Dispatch of Units With Valve-Point Effects and Multiple Fuels
274
Improved genetic algorithm for solving multiobjective solid transportation problem with fuzzy numbers
275
Improved genetic algorithm for the permutation flowshop scheduling problem
276
Improved genetic algorithm for VLSI floorplan design with non-slicing structure
277
Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part I. Algorithms Development
278
Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part II. Solvent Selection under Uncertainty
279
Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive
280
Improved Germline Transmission in Chicken Chimeras Produced by Transplantation of Gonadal Primordial Germ Cells into Recipient Embryos
281
Improved GFP gene transfection mediated by polyamidoamine dendrimer-functionalized multi-walled carbon nanotubes with high biocompatibility
282
Improved g-level calculations for coil planet centrifuges
283
Improved global convergence probability using multiple independent optimizations
284
Improved global exponential stability criteria of cellular neural networks with time-varying delays
285
Improved global robust exponential stability criteria for interval neural networks with time-varying delays
286
Improved global robust stability criterion for delayed neural networks
287
Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants
288
Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants
289
Improved global α-optical model potential at low energies Original Research Article
290
Improved global α-optical model potentials at low energies Original Research Article
291
Improved global–local simulated annealing formulation for solving non-smooth engineering optimization problems
292
Improved glucosamine and N-acetylglucosamine production by an engineered Escherichia coli via step-wise regulation of dissolved oxygen level
293
Improved glucose and IL-6 by aerobic training despite no change in insulin and insulin resistance in obese women
294
Improved glucose electrochemical biosensor by appropriate immobilization of nano-ZnO
295
Improved glucuronide hydrolysis in the determination of urinary 1-hydroxypyrene
296
Improved Glycaemic Control with Insulin Glargine as Part of a Basal-bolus Regimen in T2DM Patients Inadequately Controlled on Premixed Therapy
297
Improved glycemic control induces regression of left ventricular mass in patients with type 1 diabetes mellitus
298
IMPROVED GOATS MILK AND MEAT PRODUCTION FEEDING GUAR HAY IN MARGINAL RAINFED AREAS OF POTHWAR REGION OF PAKISTAN
299
Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leach
300
Improved Gō-like Models Demonstrate the Robustness of Protein Folding Mechanisms Towards Non-native Interactions
301
Improved GPS travelling wave fault locator for power cables by using wavelet analysis
302
Improved Graft Mesenchymal Stem Cell Survival in Ischemic Heart With a Hypoxia-Regulated Heme Oxygenase-1 Vector Original Research Article
303
Improved graphene growth in UHV: Pit-free surfaces by selective Si etching of SiC(0001)–Si with atomic hydrogen
304
Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning Original Research Article
305
Improved gravitational grain size separation method
306
Improved gravitational search algorithm for parameter identification of water turbine regulation system
307
Improved green properties of gelcast alumina through multiple synergistic interaction of polysaccharides
308
Improved Green’s function measurement for hybridization expansion quantum Monte Carlo Original Research Article
309
Improved Grey predictor rolling models for wind power prediction
310
Improved GRG method for the optimal synthesis of linkages in function generation problems
311
Improved grounded-capacitor SRCO using only a single PFTFN
312
Improved groundwater vulnerability mapping for the karstic chalk aquifer of south east England
313
Improved Group Search Optimization Algorithm for Multi- Objective Optimal Reactive Power Dispatch
314
Improved group search optimization method for solving CHPED in large scale power systems
315
Improved growth and essential oil yield and quality in Foeniculum vulgare mill on mycorrhizal inoculation supplemented with P-fertilizer
316
Improved growth and nutrition status in children with methylmalonic or propionic acidemia fed an elemental medical food
317
Improved growth of GaN layers on ultra thin silicon nitride/Si (1 1 1) by RF-MBE
318
Improved growth of Ge quantum dots in Ge/Si stacked layers by pre-intermixing treatments
319
Improved growth of lipoprotein lipase deficient kittens by feeding a low-fat, highly digestible diet
320
Improved growth of salinity-stressed soybean after inoculation with salt pre-treated mycorrhizal fungi
321
Improved growth with bioabsorbable sutures in both high- and low-pressure zones
322
Improved growth, productivity and quality of tomato (Solanum lycopersicum L.) plants through application of shikimic acid
323
Improved GUT and SUSY breaking by the same field Original Research Article
324
Improved gyratory crushing operation by the assessment of liner wear and mantle profile redesign
325
Improved H2 production rate by hydrolysis of Ammonia Borane using quaternary alloy catalysts
326
Improved H2 sensing properties of Co-doped SnO2 nanofibers
327
Improved H2-sensing performance of nanocluster-based highly porous tungsten oxide films operating at moderate temperature
328
Improved Haar and Walsh functions over triangular domains
329
Improved haemocompatibility of cysteine-modified polymers via endogenous nitric oxide
330
Improved haemorrheological properties by Ginkgo biloba extract (Egb 761) in type 2 diabetes mellitus complicated with retinopathy
331
Improved Halbach sensor for NMR scanning of drill cores
332
Improved Hamiltonian for Minkowski Yang-Mills theory Original Research Article
333
Improved Hand Hygiene Compliance through “I Save Lives with Clean Hands” Campaign
334
Improved hardness and corrosion resistance of iron by Ti/TiN multilayer coating and plasma nitriding duplex treatment
335
Improved hardness and hierarchic influences on wear in submicron sintered alumina
336
Improved hardness and hierarchic influences on wear in submicron sintered alumina
337
Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering
338
Improved hard-thermal-loop effective action for hot QED and QCD Original Research Article
339
Improved Hardy inequalities in the Grushin plane
340
Improved harmony search algorithms for sizing optimization of truss structures
341
Improved HBT linearity with a "post-distortion"-type collector linearizer
342
Improved Healing of Colonic Anastomosis with Allotransplantation of Axillary Skin Fibroblasts in Rats
343
Improved health and growth of fish fed mannan oligosaccharides: Potential mode of action
344
Improved Health-Related Quality of Life and Functional Status After Surgical Ventricular Restoration
345
Improved health-relevant functionality in dark germinated Mucuna pruriens sprouts by elicitation with peptide and phytochemical elicitors
346
Improved heat stability by whey protein–surfactant interaction
347
Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchanger
348
Improved heating-element configurations for a tunnel oven
349
Improved heavy quark potential at finite temperature from anti-de Sitter supergravity
350
Improved hemocompatibility of poly(ethylene terephthalate) modified with various thiol-containing groups
351
Improved Hemodynamics and Outcome After Modified Norwood Operation on the Beating Heart
352
Improved Hessian approximation with modified secant equations for symmetric rank-one method
353
Improved heterogenized catalysts for selective propylene oligomerization to 2,3-dimethylbutenes prepared by oxidative addition of polymer-anchored β-dithioacetylacetonate ligands to nickel(0) complexes Original Research Article
354
Improved heteronuclear decoupling in REDOR with the use of TPPM
355
Improved heteronuclear decoupling schemes for solid-state magic angle spinning NMR by direct spectral optimization
356
Improved heuristic methods for multiple stage production planning
357
Improved heuristics for sequencing cutting patterns
358
Improved heuristics for the early/tardy scheduling problem with no idle time
359
Improved heuristics for the n-job single-machine weighted tardiness problem
360
Improved heuristics for the traveling purchaser problem
361
Improved HF propagation and system performance predictions under ionospherically extreme conditions Original Research Article
362
Improved Hidden Markov Model training for multiple sequence alignment by a particle swarm optimization—evolutionary algorithm hybrid
363
Improved hidden Markov models in the wavelet-domain
364
Improved Higgs mass stability bound in the standard model and implications for supersymmetry
365
Improved high cycle fatigue properties of a new magnesium alloy
366
Improved high performance liquid chromatographic method for determination of carotenoids in the microalga Chlorella pyrenoidosa
367
Improved high performance liquid chromatographic separation of anthocyanin compounds from grapes using a novel mixed-mode ion-exchange reversed-phase column
368
Improved high power Li-ion batteries with Li2RuO3 addition: A fast charging and fast cycling study
369
Improved high Q value of 0.5LaAlO3-0.5SrTiO3 microwave dielectric ceramics at low sintering temperature
370
Improved high Q value of CaTiO3–Ca(Mg1/3Nb2/3)O3 solid solution with near zero temperature coefficient of resonant frequency
371
Improved high q value of MgTiO3-CaTiO3 microwave dielectric ceramics at low sintering temperature
372
Improved high recovery brackish water desalination process based on fluidized bed air stripping Original Research Article
373
Improved high resistivity ZnS films on HgCdTe for passivation of infrared devices
374
Improved high temperature properties of SiC-ceramics sintered with Lu2O3-containing additives
375
Improved high temperature stability of NH3-SCR catalysts based on rare earth vanadates supported on TiO2single bondWO3single bondSiO2
376
Improved high temperature stability of organic solar cells using a phosphine oxide type cathode modification layer
377
Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7
378
Improved highly sensitive method for determination of nicotine and cotinine in human plasma by high-performance liquid chromatography
379
Improved High-Order Analysis of Linear Vibrations of a Thick Sandwich Panel with an Electro-Rheological Core by Using Exponential Shear Deformation Theory
380
Improved high-performance liquid chromatographic analysis of terazosin in human plasma
381
Improved high-performance liquid chromatographic detection of paclitaxel in patientʹs plasma using solid-phase extraction, and semi-micro-bore C18 separation and UV detection
382
Improved high-performance liquid chromatographic method for the combined analysis of phospholipase, lipoxygenase and cyclooxygenase activities
383
Improved high-performance liquid chromatographic method for the pharmacokinetic studies of a novel iron chelator, CP502, in rats
384
Improved high-performance liquid chromatographic method in the analysis of adenovirus particles
385
Improved high-performance liquid chromatographic method to estimate aminosugars and its application to glycosaminoglycan determination in plasma and serum
386
Improved high-Q microwave dielectric material using B2O3-doped MgNb2O6 ceramics
387
Improved high-Q microwave dielectric resonator using CuO-doped MgNb2O6 ceramics
388
Improved high-Q microwave dielectric resonator using ZnO and WO3-doped Zr0.8Sn0.2TiO4 ceramics
389
Improved high-T/sub c/ superconductor sampler circuits using Josephson transmission line buffers
390
Improved High-Throughput Sequencing of the Human Oral Microbiome: From Illumina to PacBio
391
Improved high-throughput sunflower and cotton genomic DNA extraction and PCR fidelity
392
Improved Hilbert moment thermal QCD sum rules for Bs meson and stability with respect to moment parameter
393
Improved Histochemical Test for In Situ Detection of Hydrogen Peroxide in Cells Undergoing Oxidative Burst or Lignification
394
Improved Hiyama cross-coupling reactions using HOMSi® reagents: a novel application of a palladacycle
395
Improved Hoeffding-style performance guarantees for accurate classifier
396
Improved Hoeffding-style performance guarantees for accurate classifiers
397
Improved Hoeffding-style performance guarantees for accurate classifiers
398
Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applications
399
Improved holographic Yang–Mills at finite temperature: Comparison with data Original Research Article
400
Improved homogeneity of microcrystalline absorber layer in thin-film silicon tandem solar cells
401
Improved homopolymer separation to enable the application of 1H NMR and HPLC for the determination of the reaction parameters of the graft copolymerization of acrylic acid onto starch Original Research Article
402
Improved homotopy perturbation method for solving Fredholm type integro-differential equations
403
Improved hormonal and oxidative changes by Royal Jelly in the rat model of PCOS: An experimental study
404
IMPROVED HORTICULTURAL PRACTICES AGAINST LEAF WILTING, ROOT ROT AND NUTRIENT UPTAKE INMANGO (Mangiferaindica L.)
405
Improved HPLC method for analysis of 1-hydroxypyrene in human urine specimens of cigarette smokers
406
Improved HPLC method for the simultaneous determination of allantoin, uric acid and creatinine in cattle urine
407
Improved HPLC method for the simultaneous determination of tramadol and O-desmethyltramadol in human plasma
408
Improved HPLC methodology for food control – furfurals and patulin as markers of quality
409
Improved HPLC methodology for monitoring thiopurine metabolites in patients on thiopurine therapy
410
Improved human oocyte development after vitrification: a comparison of thawing methods
411
Improved HVAC operation to preserve a church organ
412
Improved hybrid approach to transient stability assessment
413
Improved hybrid MMSE detection for turbo-trellis-coded modulation-assisted multi-user OFDM systems
414
Improved hybrid simulated annealing algorithm for navigation scheduling for the two dams of the Three Gorges Project
415
Improved hydrate equilibrium measurements in ternary gas and black oil systems
416
Improved hydrocarbons analysis of heavy petroleum fractions by high temperature comprehensive two-dimensional gas chromatography
417
Improved hydrodynamic equations for the accurate prediction of diffusivities in supercritical carbon dioxide
418
Improved hydrodynamic permeability and antifouling properties of poly(vinylidene fluoride) membranes using polydopamine nanoparticles as additives
419
Improved hydrogen cycling kinetics of nano-structured magnesium/transition metal multilayer thin films
420
Improved hydrogen desorption in lithium alanate by addition of SWCNT–metallic catalyst composite
421
Improved hydrogen desorption properties of ammonia borane by Ni-modified metal-organic frameworks
422
Improved hydrogen evolution activities under visible light irradiation over NaTaO3 codoped with lanthanum and chromium
423
Improved hydrogen gas production in electrohydrolysis of vinegar fermentation wastewater by scrap aluminum and salt addition
424
Improved hydrogen generation from alkaline NaBH4 solution using cobalt catalysts supported on modified activated carbon
425
Improved hydrogen generation from alkaline solution using carbon-supported as catalysts
426
Improved hydrogen generation from formic acid
427
Improved hydrogen production by coupled systems of hydrogenase negative photosynthetic bacteria and fermentative bacteria in reverse micelles
428
Improved hydrogen production by uptake hydrogenase deficient mutant strain of Rhodobacter sphaeroides O.U.001
429
Improved hydrogen production from water splitting using TiO2–ZnO mixed oxides photocatalysts
430
Improved hydrogen production of the downstream bioreactor by coupling single chamber microbial fuel cells between series-connected photosynthetic biohydrogen reactors
431
Improved hydrogen production under microaerophilic conditions by overexpression of polyphosphate kinase in Enterobacter aerogenes
432
Improved hydrogen production via thermophilic fermentation of corn stover by microwave-assisted acid pretreatment
433
Improved hydrogen sensing characteristics of a Pt/SiO2/GaN Schottky diode
434
Improved hydrogen sorption performance of NbF5-catalysed NaAlH4
435
Improved hydrogen sorption/desorption capacity of exfoliated NiCl2-graphite intercalation compound effected by thermal treatment
436
Improved hydrogen storage behaviours of nanocrystalline and amorphous Mg2Ni-type alloy by Mn substitution for Ni
437
Improved hydrogen storage capacity through hydrolysis of solid NaBH4 catalyzed with cobalt boride
438
Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect
439
Improved hydrogen storage performance of defected carbon nanotubes with Pd spillover catalysts dispersed using supercritical CO2 fluid
440
Improved hydrogen storage performance of Li–Mg–N–H materials by optimizing composition and adding single-walled carbon nanotubes
441
Improved hydrogen storage performance of Mg(NH2)2/LiH mixture by addition of carbon nanostructured materials
442
Improved hydrogen storage performance of MgH2–NaAlH4 composite by addition of TiF3
443
Improved hydrogen storage performance of the LiNH2–MgH2–LiBH4 system by addition of ZrCo hydride
444
Improved hydrogen storage properties in Mg-based thin films by tailoring structures
445
Improved hydrogen storage properties of LiBH4 by mechanical milling with various carbon additives
446
Improved hydrogen storage properties of LiBH4 doped Li–N–H system
447
Improved hydrogen storage properties of Mg-based nanocomposite by addition of LaNi5 nanoparticles
448
Improved hydrogen storage reversibility of LiBH4 destabilized by Y(BH4)3 and YH3
449
Improved hydrogenolysis (C–S, C–M) function with basic supported hydrodesulfurization catalysts
450
Improved hydrogen-sensing performance of a Pd/GaN Schottky diode with a surface plasma treatment approach
451
Improved hydrogen-sensitive properties of MISiC Schottky sensor with thin NO-grown oxynitride as gate insulator
452
Improved hydrolysis properties of Mg3RE hydrides alloyed with Ni
453
Improved hydrophilic interaction chromatography method for the identification and quantification of glucosinolates
454
Improved Hydrophilicity of Membrane by Ethylenediaminetetraacetic Acid Modification
455
Improved hydrophilicity of zinc oxide-incorporated layer-by-layer polyelectrolyte film fabricated by dip coating method
456
Improved hydrophobicity of inorganic–organic hybrid mesoporous silica with cage-like pores
457
Improved Hydrosolar Roof for buildings’ air conditioning
458
Improved hydrothermal stability of niobia-supported Pd catalysts Original Research Article
459
Improved ID-based security framework for ad hoc network
460
Improved identification and autotuning of PI controllers for MIMO processes by relay techniques
461
Improved identification of coronary artery disease in patients with left bundle branch block by use of dobutamine stress echocardiography and comparison with myocardial perfusion tomography
462
Improved identification of Hammerstein plants using new CPSO and IPSO algorithms
463
Improved identification of metabolites in complex mixtures using HSQC NMR spectroscopy Original Research Article
464
Improved Identification of Patients With Coronary Artery Disease by the Use of New Lipid and Lipoprotein Biomarkers
465
Improved identification of squeeze-film damper models for aeroengine vibration analysis
466
Improved identification of sulfidic soil materials by a modified incubation method
467
Improved identification of volcanic features using Landsat 7 ETM+
468
Improved IEEE802.11 PCF performance using silence detection and cyclic shift on stations polling
469
Improved image contrast with mangafodipir trisodium (MnDPDP) during MR-guided percutaneous cryosurgery of the liver
470
Improved image decoding over noisy channels using minimum mean-squared estimation and a Markov mesh
471
Improved image quality in abdominal computed tomography reconstructed with a novel Deep Learning Image Reconstruction technique – initial clinical experience
472
Improved image quality in digital mammography with image processing
473
Improved Image Quality of Coronary CT Angiography Using Automatic Motion Correction
474
Improved imaging in delicate situations
475
Improved imaging of secondary phases in solids by energy-filtering TEM
476
Improved imaging of secondary phases in solids by energy-filtering TEM
477
Improved immobilization of biomolecules to quinone-rich polydopamine for efficient surface functionalization
478
Improved immobilized carbon dioxide capture sorbents
479
Improved Immune Function with Donor B-cell Infusion after Semi-Allogeneic Bone Marrow Transplantation in Mice
480
Improved Immune Functions with Administration of a Low-Fat Diet in a Burn Animal Model
481
Improved immuno double labelling for cell and structural biology
482
Improved Immunogenicity of Tetanus Toxoid by Brucella abortus S19 LPS Adjuvant
483
Improved immunogold labeling of epoxy sections by the use of propylene oxide as additional agent in dehydration, infiltration and embedding
484
Improved immunological detection of Spongospora subterranea
485
Improved Impact Toughness of 13Cr Martensitic Stainless Steel Hardened by Laser
486
Improved implementation and robustness study of the X-FEM for stress analysis around cracks
487
Improved implementation of the extended finite element method for stress analysis around cracks
488
Improved implicit integrators for transient impact problems - geometric admissibility within the conserving framework
489
Improved implicit integrators for transient impact problems––dynamic frictional dissipation within an admissible conserving framework Original Research Article
490
Improved in ovulo embryo culture for stenospermocarpic grapes (Vitis vinifera L.)
491
Improved in silico prediction of carcinogenic potency (TD50) and the risk specific dose (RSD) adjusted Threshold of Toxicological Concern (TTC) for genotoxic chemicals and pharmaceutical impurities
492
Improved in situ calibration technique for ITER ex-vessel neutron yield monitor
493
Improved in vitro and in vivo biocompatibility of dual plasma modified titanium alloy
494
Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment
495
Improved in vitro detection of hemolysin BL from Bacillus cereus
496
Improved in vitro propagation of Curcuma caesia, a valuable medicinal plant
497
Improved in vivo human carotid artery wall T2⁎ estimation
498
Improved in vitro rooting and acclimatization of Jatropha curcas plantlets
499
Improved Incompressible Smoothed Particle Hydrodynamics method for simulating flow around bluff bodies
500
Improved incorporation and stabilisation of β-carotene in hydrocolloids using glycerol
501
Improved indicators of cell membrane potential that use fluorescence resonance energy transfer Original Research Article
502
Improved indicators of water use performance and productivity for sustainable water conservation and saving
503
Improved indoor thermal comfort during defrost with a novel reverse-cycle defrosting method for air source heat pumps
504
Improved induced matchings in sparse graphs Original Research Article
505
Improved induction technique for electric charge measuring
506
Improved industrial water management through membrane processes — the case of a large thermo-electric power plant Original Research Article
507
IMPROVED INFEASIBLE-INTERIOR-POINT ALGORITHM FOR LINEAR COMPLEMENTARITY PROBLEMS
508
Improved inference for a linear mixed-effects model when the subpopulation effects are clustered
509
Improved inference in nonparametric regression using Lk-smoothing splines
510
Improved inference in the evaluation of mutual fund performance using panel bootstrap methods
511
Improved inference in the evaluation of mutual fund performance using panel bootstrap methods
512
Improved Inference of Mutation Rates: I. An Integral Representation for the Luria–Delbrück Distribution
513
Improved Inference of Mutation Rates: II. Generalization of the Luria–Delbrück Distribution for Realistic Cell-Cycle Time Distributions
514
Improved inference on a scalar fixed effect of interest in nonlinear mixed-effects models
515
Improved inference on a scalar fixed effect of interest in nonlinear mixedeffects models
516
Improved information on electron screening in (7)Li(p,(alpha))(alpha) using the Trojan-horse method
517
Improved infrared and visible emission spectra of the H3 and D3 molecules
518
Improved infrared spectrophotometer for point-of-care patient 13C-urea breath testing in the primary care setting
519
Improved inhomogeneous Strichartz estimates for the Schrِdinger equation
520
Improved in-hospital mortality in women undergoing coronary artery bypass grafting
521
Improved initial density dependence of the viscosity and a corresponding states function for high pressures
522
Improved initial discharge capacity of nanostructured Ni-Co spinel ferrite as anode material in lithium ion batteries
523
Improved injectability and in vitro degradation of a calcium phosphate cement containing poly(lactide-co-glycolide) microspheres
524
Improved innovation through the integration of Quality Gates into the Enterprise and Product Lifecycle Roadmaps
525
Improved input parameters for diffusion models of skin absorption
526
Improved Insert Geometry for Reducing Tank-Wall Losses in Pad-Mounted Transformers
527
Improved instantaneous frequency estimation using an adaptive short-time Fourier transform
528
Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation
529
Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation
530
Improved instrumental variables and generalized method of moments estimators
531
Improved Insulin Resistance with Clearance of Chronic Hepatitis C, Genotype 4
532
Improved integral formulations for fast 3-D method-of-momentssolvers
533
Improved integral inequalities in n independent variables
534
Improved integro-modal approach with pressure distribution assessment and the use of overlapped cavities
535
Improved interatomic potential for stressed Si, O mixed systems
536
IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM
537
IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM
538
Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing
539
Improved interfacial adhesion in PBO fiber/bismaleimide composite with oxygen plasma plus aging and humid resistance properties
540
Improved interfacial and electrical properties of atomic layer deposition HfO2 films on Ge with La2O3 passivation
541
Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders Original Research Article
542
Improved interframe registration based nonuniformity correction for focal plane arrays
543
Improved interior point method for OPF problems
544
Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers Original Research Article
545
Improved intermediate asymptotics for the heat equation
546
Improved intermolecular water potential from global geometry optimization of small water clusters using local MP2 Original Research Article
547
Improved interpolation of meteorological forcings for hydrologic applications in a Swiss Alpine region
548
Improved interpretation of in-diffusion measurements with confined swelling clays
549
Improved interpretation of solar wind ion measurements via high-resolution magnetic field data Original Research Article
550
Improved Interstage Mortality With the Modified Norwood Procedure: A Meta-Analysis
551
Improved inter-tube coupling in CNT bundles through carbon ion irradiation Original Research Article
552
Improved interval estimation for the two-parameter Birnbaum–Saunders distribution
553
Improved intraocular bioavailability of ganciclovir by mucoadhesive polymer based ocular microspheres: development and simulation process in Wistar rats
554
Improved intrapartum surveillance with PR interval analysis of the fetal electrocardiogram: A randomized trial showing a reduction in fetal blood sampling
555
Improved invariant set estimation for general-scale families
556
Improved inventory models with service level and lead time
557
Improved inverse halftoning using vector and texture-lookup table-based learning approach
558
Improved iodometric method for simultaneous determination of non-stoichiometric oxygen and total copper content in YBCO superconductors
559
Improved ion guide for heavy-ion fusion–evaporation reactions
560
Improved ion guide for heavy-ion fusion–evaporation reactions
561
Improved ionic conductivity in NdGdZr2O7: Influence of Sc3+ substitution
562
Improved ionic conductivity of nitrile rubber/ionic liquid composites
563
Improved ionic conductivity of nitrile rubber/Li(CF3SO2)2N composites by adding imidazolium-type zwitterion
564
Improved iron solubility in carrot juice fermented by homo- and hetero-fermentative lactic acid bacteria Original Research Article
565
Improved irrigation water demand forecasting using a soft-computing hybrid model
566
Improved isolation and detection of pathogenic Vibrio parahaemolyticus from seafood using a new enrichment broth
567
Improved isolation of glucuronan from algae and the production of glucuronic acid oligosaccharides using a glucuronan lyase Original Research Article
568
Improved isospin dependent quantum molecular dynamics model and its application to fusion reactions near Coulomb barrier Original Research Article
569
Improved Itchy Quality of Life Following Topical Application of Sweet Almond Oil in Patients with Uremic Pruritus: A Randomized, Controlled Trial
570
Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere
571
Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere
572
Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere
573
Improved J and COD estimation by GE/EPRI method in elastic to fully plastic transition zone
574
Improved Jacobi matrix method for the numerical solution of Fredholm integro-differential-difference equations
575
Improved Jacobi-function method with symbolic computation to construct new double-periodic solutions for the generalized Ito system
576
Improved Jacobin elliptic function method and its applications
577
Improved Jsc in CIGS thin film solar cells using a transparent conducting ZnO:B window layer
578
Improved Kaplan-Meier Estimator in Survival Analysis Based on Partially Rank-Ordered Set Samples
579
Improved kernel fisher discriminant analysis for fault diagnosis
580
Improved kernel principal component analysis for fault detection
581
Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions Original Research Article
582
Improved kinetic data from analysis of complex hydrocarbon mixtures by using SIMCA Original Research Article
583
Improved kinetic model for water splitting thermochemical cycles using Nickel Ferrite
584
Improved kinetic modeling of the early generation of CO2 from the Boom Clay kerogen. Implications for simulation of CO2 production upon disposal of high activity nuclear waste
585
Improved kinetics-based gold cyanide extraction with mixture of LIX79+TOPO utilizing hollow fiber membrane contactors
586
Improved King’s methods with optimal order of convergence based on rational approximations
587
Improved K-Means Algorithm for Capacitated Clustering Problem
588
Improved K-Means Algorithm for Identification MR Brain Image Tumor
589
Improved k-nearest neighbor classification
590
Improved Knock Detection Method Based on New Time-Frequency Analysis In Spark Ignition Turbocharged Engine
591
Improved knowledge management through first-order logic in engineering design ontologies
592
Improved K-value correlation for UAE crude oil components at high pressures using PVT laboratory data☆
593
Improved K-values correlation for UAE crude oil components at low pressures using PVT laboratory data
594
Improved k–ε model and wall function formulation for the RANS simulation of ABL flows
595
Improved k–ε two-equation turbulence model for canopy flow
596
Improved l1-SPIRiT using 3D walsh transform-based sparsity basis
597
Improved L2-stabilization theory to compute resonances under multichannel conditions
598
Improved label propagation algorithms with node attribute and link strength for community detection
599
Improved labeling technique and radiochemical purity determination of 99mTc-N-acetylcysteine
600
Improved land cover and emission factors for modeling biogenic volatile organic compounds emissions from Hong Kong
601
Improved land surface emissivities over agricultural areas using ASTER NDVI
602
Improved language modelling through better language model evaluation measures
603
Improved Laplacian Smoothing of Noisy Surface Meshes
604
Improved large mesoporous ordered molecular sieves—Stabilization and acid/base functionalization
605
Improved large optical cavity design for 10.6 μm (Al)GaAs quantum cascade lasers
606
Improved large-scale production of vitamin B12 by Pseudomonas denitrificans with betaine feeding
607
Improved large-scale synthesis of phenylisoserine and the taxol C-13 side chain
608
Improved large-signal performance of paralleled DC-DC converters current sharing
609
Improved Laser Beams-Based Security Fence to Protect Borders
610
Improved Late Cretaceous and early Cenozoic Paleomagnetic apparent polar wander path for the Pacific plate
611
Improved latex agglutination test for detection of antibodies in serum and cerebrospinal fluid of Trypanosoma brucei gambiense infected patients
612
Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell
613
Improved lead alloys for lead/acid positive grids in electric-vehicle applications
614
Improved leakage current and ferromagnetic properties in magnetic field annealed BiFeO3-based ceramics
615
Improved learning of I2C distance and accelerating the neighborhood search for image classification
616
Improved Lebesgue constants on the triangle
617
Improved lectin-mediated immobilization of human red blood cells in superporous agarose beads
618
Improved left atrial transport and function with orthotopic heart transplantation by bicaval and pulmonary venous anastomoses
619
Improved left ventricular endocardial border delineation and opacification with OPTISON (FS069), new echocardiographic contrast agent : Results of phase III multicenter trial
620
Improved Left Ventricular Function After Chronic Left Ventricular Unloading
621
Improved left ventricular function after thiamine supplementation in patients with congestive heart failure receiving long-term furosemide therapy,
622
Improved legume tree fallows and tillage effects on structural stability and infiltration rates of a kaolinitic sandy soil from central Zimbabwe
623
Improved Level Balancing with Diode-Clamped Multi-Level Inverter Configuration Based on Multi-Winding Transformer
624
Improved LIBS limit of detection of Be, Mg, Si, Mn, Fe and Cu in aluminum alloy samples using a portable Echelle spectrometer with ICCD camera
625
Improved lifetime in organic solar cells using a bilayer cathode of organic interlayer/Al
626
Improved lifetime of microchannel-plate PMTs
627
Improved lifetime of microchannel-plate PMTs
628
Improved light absorption in thin-film silicon solar cells by integration of silver nanoparticles
629
Improved light extraction efficiency with angle independent electroluminescence spectrum in nano-phosphor coated white organic light emitting diodes
630
Improved light output power of InGaN/GaN MQW LEDs by lower temperature p-GaN rough surface
631
Improved light scattering and surface plasmon tuning in amorphous silicon solar cells by double-walled carbon nanotubes
632
Improved light transitions from scintillators to new photocathode windows
633
Improved light transitions from scintillators to new photocathode windows
634
Improved light trapping in thin-film silicon solar cells via alternated n-type silicon oxide reflectors
635
Improved light yield of lead tungstate scintillators
636
Improved light yield of lead tungstate scintillators
637
Improved light-load efficiency for synchronous rectifier voltage regulator module
638
Improved lignocellulose conversion to biofuels with thermophilic bacteria and thermostable enzymes
639
Improved likelihood ratio and score tests on concentration parameters of von Mises–Fisher distributions
640
Improved likelihood ratio tests for cointegration rank in the VAR model
641
Improved likelihood ratio tests for cointegration rank in the VAR model
642
Improved likelihood ratio tests on the von Mises–Fisher distribution
643
Improved likelihood-based inference for the MA(1) model
644
Improved likelihood-based inference for the stationary AR(2) model
645
Improved limit on the branching ratio of μ−→e+ conversion on titanium
646
Improved limit on the electron capture decay branch of 176Lu
647
Improved limits for natural α radioactivity of tungsten with a CaWO4 scintillating bolometer
648
Improved Lindstedt–Poincaré method for the solution of nonlinear problems
649
Improved linear interpolation method for the estimation of snow-covered area from optical data
650
Improved linear multi-step methods for stochastic ordinary differential equations
651
Improved linear systolic algorithms for substring statistics
652
Improved liposome immunomigration strip assay for alachlor determination
653
Improved liquid chromatographic method for determination of carotenoids in Taiwanese mango (Mangifera indica L.)
654
Improved liquid chromatographic method for mitoxantrone quantification in mouse plasma and tissues to study the pharmacokinetics of a liposome entrapped mitoxantrone formulation
655
Improved liquid chromatographic method for the analysis of photosynthetic pigments of higher plants
656
Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of gentamicin
657
Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of kanamycin
658
Improved liquid chromatography tandem mass spectrometry method for the determination of phenolic compounds in virgin olive oil
659
Improved liquid chromatography–mass spectrometry performance in quantitative analysis using a nanosplitter interface
660
Improved liquid chromatography—Online radioactivity detection for metabolite profiling
661
Improved liquid chromatography–tandem mass spectrometry method for the analysis of eptifibatide in human plasma
662
Improved liquid-chromatography tandem mass spectrometry method for the determination of the bioactive dipeptides, carnosine and anserine: Application to analysis in chicken broth
663
Improved liquid–liquid–liquid microextraction method and its application to analysis of four phenolic compounds in water samples
664
Improved lithium capacity of defective V2O5 materials
665
Improved lithium manganese oxide spinel/graphite Li-ion cells for high-power applications
666
Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping
667
Improved Liu estimator in a linear regression model
668
Improved LMI representations for the analysis and the design of continuous-time systems with polytopic type uncertainty
669
Improved load-frequency control with capacitive energy storage
670
Improved local control of invasive bladder cancer by concurrent cisplatin and preoperative or definitive radiation: CM Coppin, MK Gospodarowicz, K James, IF Tannock, B Zee, J Carson, J Pater, LD Sullivan for the National Cancer Institute of Canada Clinica
671
Improved local convergence analysis of inexact Gauss–Newton like methods under the majorant condition in Banach spaces
672
Improved local search algorithms for the rectangle packing problem with general spatial costs
673
Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies
674
Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies
675
Improved logarithmic-geometric mean inequality and its application
676
Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study
677
Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study
678
Improved Long-range Order of Silicious MCM-41 by Gradual Heating of Synthesis Gel
679
Improved long-term survival associated with stent deployment during percutaneous coronary interventions: Results from a registry of 3399 patients
680
Improved long-term survival seen after lung volume reduction surgery compared to continued medical therapy for emphysema
681
Improved loquat (Eriobotrya japonica Lindl.) cultivars: Variation of phenolics and antioxidative potential
682
Improved Los Alamos model applied to the neutron induced fission of 235U and 237Np
683
Improved Los Alamos model applied to the neutron induced fission of 239Pu and 240Pu and to the spontaneous fission of Pu isotopes
684
Improved loss calculations at an ATM multiplexer
685
Improved low energy electron projection in-line holograms reconstruction: application to the holograms of a tungsten tip
686
Improved low temperature removal of NOX from lean-burn exhaust via adsorption on TiO2-modified Ag–alumina Original Research Article
687
Improved Low Voltage - Ride Through (LVRT) Performance of an Active Distribution Grid by Providing a Bidirectional Converter to Control DC Bus Voltage Ripple
688
Improved Low Voltage Ride-Through Capability of DFIG with ESO Controller under Unbalanced Network Conditions
689
Improved Low Voltage Ride-through Capability of PV Connected to the Unbalanced Main Grid
690
Improved lower bound for the vertex connectivity of image-cages Original Research Article
691
Improved lower bound on the number of balanced symmetric functions over GF(p)
692
Improved lower bound on the Shannon capacity of C7
693
Improved Lower Bounds for Learning from Noisy Examples: An Information-Theoretic Approach
694
Improved lower bounds for the capacitated lot sizing problem with setup times
695
Improved lower bounds for the link length of rectilinear spanning paths in grids
696
Improved low-lying energy levels determined from solar coronal forbidden and spin-forbidden lines in the 500–1500 Å range
697
Improved low-order models for heat conduction problems
698
Improved low-temperature hydrogen generation from NH3BH3 and TiO2 composites pretreated with water
699
Improved low-temperature performance of lithium-ion cells with quaternary carbonate-based electrolytes
700
Improved luminance and luminous efficiency of AC plasma display panel
701
Improved luminescence of Y2MoO6:Eu3+ by doping Li+ ions for light-emitting diode applications
702
Improved luminescence properties of pulsed laser deposited Y3(Al,Ga)5O12:Tb thin films by post deposition annealing
703
Improved luminescent efficiency of a red organic dye with modified molecular structure
704
Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation
705
Improved luminosity model and albedo for Saturn
706
Improved luminous transmittance and diminished yellow color in VO2 energy efficient smart thin films by Zn doping
707
Improved lumped analysis of transient heat conduction in a nuclear fuel rod
708
Improved lumped models for asymmetric cooling of a long slab by heat convection
709
Improved lumped models for combined convective and radiative cooling of a wall
710
Improved lumped models for transient combined convective and radiative cooling of multi-layer composite slabs
711
Improved lumped models for transient radiative cooling of a spherical body
712
Improved lumped parameter formulation for simplified LWR thermohydraulic analysis
713
Improved lumped-differential formulations in hyperbolic heat conduction
714
Improved lung function by urokinase infusion in canine lung transplantation using non-heart-beating donors
715
Improved Machinability in Hard Milling and Strategies for Steel Development
716
Improved magnetic coordinate representation for ideal ballooning stability calculations with the COBRA code Original Research Article
717
Improved magnetic properties of Cr3+ doped SrFe12O19 synthesized via microwave hydrothermal route
718
Improved magnetic trapped field in thin-wall YBCO single-domain samples by high-pressure oxygen annealing
719
Improved magnetization transfer in solid-state NMR with fast magic angle spinning
720
Improved magnetoelectricity by uniaxial magnetic field pressed and sintered composites in BaTiO3 (x)–BaFe12O19 (1 − x) system (x = 0.8, 0.6)
721
Improved magnetotransport in LCMO-Polymer (PPS) composite
722
Improved Maintenance Strategy for Reciprocating Compressor Based on Reliability and Safety
723
Improved maize cultivated area estimation over a large scale combining MODIS–EVI time series data and crop phenological information
724
Improved MALDI-MS Analysis of Oligonucleotides through the Use of Fucose as a Matrix Additive
725
Improved management of asthma
726
IMPROVED MANAGEMENT OF MALAGASY EUCALYPTUS GRANDIS SEED ORCHARDS USING MICROSATELLITES AND PATERNITY ASSIGNMENT
727
Improved management of Vertisols in the semiarid tropics for increased productivity and soil carbon sequestration
728
Improved maneuverability of power plants for better grid stability
729
Improved manufacturing method and mechanical performances of carbon fiber reinforced lattice-core sandwich cylinder
730
Improved many-to-one sweeping
731
Improved Mapping Algorithms Performance in NoCs Design Based on Cellular Learning Automata
732
Improved market segmentation by fuzzifying crisp clusters: A case study of the energy market in Spain
733
Improved marketing decision making in a customer churn prediction context using generalized additive models
734
Improved mass constraints in the MSSM from vacuum stability
735
Improved mass transfer using a pore former in cathode catalyst layer in the direct methanol fuel cell
736
Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests
737
Improved Mathematical Model for Helicopter Flight Dynamics Applications
738
Improved mathematical model for mass transfer in fractured reservoirs during the gas injection process
739
Improved matrix inversion in image plane parallel MRI
740
Improved matrix pair undecidability results
741
Improved matrix reasoning is limited to training on tasks with a visuospatial component
742
Improved maximum entropy analysis with an extended search space
743
Improved maximum frequency estimation with application to instantaneous mean frequency estimation of surface electromyography
744
Improved maximum likelihood estimation of parameters in the Maxwell distribution
745
Improved Maximum Likelihood Frequency Offset Estimation Based on Likelihood Metric Design
746
Improved measurement characteristics in collimation testing using Lau interferometry and Fourier fringe analysis technique
747
IMPROVED MEASUREMENT METHODS FOR RAILWAY ROLLING NOISE
748
Improved measurement of Asteroid (4) Vesta’s rotational axis orientation
749
Improved measurement of formaldehyde in water-soluble polymers by high-performance liquid chromatography coupled with post-column reaction detection
750
Improved Measurement of Pressure Gradients in Aortic Coarctation by Magnetic Resonance Imaging
751
Improved measurement of the lifetime of the τ lepton
752
Improved measurement of the probability for gluon splitting into bb̄ in Z0 decays
753
Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method
754
Improved measurements for better decision on heat recovery solutions with heat pumps
755
Improved measurements of ICRF antenna coupling at ASDEX Upgrade and comparison with the ICRF coupling code TOPICA
756
Improved measurements of Na+ fluxes in plants using calixarene-based microelectrodes
757
Improved measurements of the drop size distribution of a freezing drizzle event
758
Improved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries
759
Improved mechanical and functional properties of elastomer/graphite nanocomposites prepared by latex compounding Original Research Article
760
Improved mechanical and swelling behavior of the composite hydrogels prepared by ionic monomer and acid-activated Laponite
761
Improved mechanical and tribological properties of tin–bronze journal bearing materials with newly developed tribaloy alloy additive
762
Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions
763
Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions
764
Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying
765
Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying
766
Improved mechanical performance of solution-processed MWCNT/Ag nanoparticle composite films with oxygen-pressure-controlled annealing Original Research Article
767
Improved mechanical performance: Shear behaviour of strain-hardening cement-based composites (SHCC)
768
Improved mechanical properties and hydrophilicity of electrospun nanofiber membranes for filtration applications by dopamine modification
769
Improved Mechanical Properties and Thermal Stability of Sm-Co High Temperature Magnets Resulting From Surface Modifications Original Research Article
770
Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu
771
Improved Mechanical Properties in Nb2O5/V2O5 Doped Spinel Ferrites
772
Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression
773
Improved mechanical properties of bulk glassy alloys containing spherical pores
774
Improved mechanical properties of carbon nanotube/polymer composites through the use of carboxyl-epoxide functional group linkages
775
Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling
776
Improved mechanical properties of Cu matrix composites reinforced with β-Si3N4 whiskers
777
Improved mechanical properties of epoxy reinforced by low content nanodiamond powder
778
Improved mechanical properties of hydroxyapatite whisker-reinforced poly(l-lactic acid) scaffold by surface modification of hydroxyapatite
779
Improved mechanical properties of hydroxyapatite/poly(ɛ-caprolactone) scaffolds by surface modification of hydroxyapatite
780
Improved mechanical properties of retorted carrots by ultrasonic pre-treatments
781
Improved mechanical properties of retorted carrots by ultrasonic pre-treatments
782
Improved mechanical properties of SnO2:F thin film by structural modification Review Article
783
Improved mechanical properties of solution-cast silicone film reinforced with electrospun polyurethane nanofiber containing carbon nanotubes
784
Improved mechanical properties of Ti–15V–3Cr–3Sn–3Al alloy by electron beam welding process plus heat treatments and its microstructure evolution
785
Improved mechanical property and biocompatibility of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for blood vessel tissue engineering by blending with poly(propylene carbonate)
786
Improved mechanical property and internal friction of pure Mg processed by ECAP
787
Improved Mechanical Reliability of the HeartMate XVE Left Ventricular Assist System
788
Improved mechanical strength and electrical conductivity of organogels containing carbon nanotubes Original Research Article
789
Improved mechanistic foam simulation with foam catastrophe theory
790
Improved medium for isolatin Rhizobium meliloti from soil
791
Improved medium for isolatin Rhizobium meliloti from soil
792
Improved membrane and electrode assemblies for proton exchange membrane fuel cells
793
Improved membrane fluidity of ionic polysaccharide bead-supported phospholipid bilayer membrane systems
794
Improved membrane structures for seawater desalination by studying the influence of sublayers Original Research Article
795
Improved merit order and augmented Lagrange Hopfield network for short term hydrothermal scheduling
796
Improved merit order and augmented Lagrange Hopfield network for unit commitment
797
Improved metabolic control reduces the number of postprandial apolipoprotein B-48-containing particles in Type 2 diabetes
798
Improved metal affinity of chelating adsorbents through graft polymerization
799
Improved metal cutting performance with bias-modulated textured Ti0.50Al0.50N multilayers
800
Improved Metal-Support Interaction in Pt/CeO2/SiO2 Catalysts after Zinc Addition
801
Improved metastability bounds on the Standard Model Higgs mass
802
Improved methane dehydrocondensation reaction on HMCM-22 and HZSM-5 supported rhenium and molybdenum catalysts Original Research Article
803
Improved methane fermentation of chicken manure via ammonia removal by biogas recycle
804
Improved methane storage capacities by sorption on wet active carbons Original Research Article
805
Improved methanol oxidation activity and stability of well-mixed PtRu catalysts synthesized by electroless plating method with addition of chelate ligands Original Research Article
806
Improved method “grid translation” for mapping environmental pollutants using a two-dimensional CAT scanning system
807
Improved method for absolute thermal contrast evaluation using Source Distribution Image (SDI)
808
Improved Method for Analysis of Airborne Asbestos Fibers Using Phase Contrast Microscopy and FTIR Spectrometry
809
Improved method for analyzing estrogens in water by liquid chromatography–electrospray mass spectrometry
810
Improved method for assaying maize plant resistance to maize rough dwarf disease by artificial inoculation and real-time RT-PCR
811
Improved method for carbohydrate-deficient transferrin determination in human serum by capillary zone electrophoresis
812
Improved method for comparing abundance data for soil zoological field studies
813
Improved Method for Detecting Fluorescent-Labeled Glycoprotein on Sodium Dodecyl Sulfate–Polyacrylamide Gel
814
Improved method for detecting the effect of gluinos in four-jet events at LEP
815
Improved method for detecting the effect of gluinos in four-jet events at LEP
816
Improved Method for Determining Food Protein Degree of Hydrolysis
817
Improved method for determining inversion layer mobility of electrons in trench MOSFETs
818
Improved Method for Direct Coronary Grafting Without CPB via Anterolateral Small Thoracotomy
819
Improved method for direct DNA sequencing of the human lipoprotein lipase gene using an auto DNA sequencer
820
Improved Method for Direct Haplotyping at the Vitamin D Receptor Gene Locus
821
Improved method for direct high-performance liquid chromatography assay of angiotensin-converting enzyme-catalyzed reactions
822
Improved method for evaluating antenna performance in mobile environment with consideration of polarization and phase
823
Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound
824
Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound Original Research Article
825
Improved method for fatty acid analysis in herbage based on direct transesterification followed by solid-phase extraction
826
Improved method for HgI2 crystal growth and detector fabrication
827
Improved method for HgI2 crystal growth and detector fabrication
828
Improved method for identifying and quantifying olive oil phenolic compounds and their metabolites in human plasma by microelution solid-phase extraction plate and liquid chromatography–tandem mass spectrometry
829
Improved method for kinetic parameters estimation of non-isothermal reaction: Application to residuum thermolysis
830
Improved method for measurement of human plasma xanthine oxidoreductase activity
831
Improved method for measuring the first-order hyperpolarizability of organic NLO materials in solution by using the hyper-Rayleigh scattering technique
832
Improved Method for Measuring Wheat Flour Dough Pressure-Sensitive Adhesiveness.
833
Improved method for optimum choice of free parameter in orthogonal approximations
834
Improved method for plasma malondialdehyde measurement by high-performance liquid chromatography using methyl malondialdehyde as an internal standard
835
Improved method for prediction of heavy metal recoveries from soil using high intensity magnetic separation (HIMS)
836
Improved method for prediction of rain attenuation in terrestrial links
837
Improved method for preparation of anhydrous silica by microwave irradiation with spectroscopic characterization and toxicity assay
838
Improved method for rapid determination of vitamin A in small samples of breast milk by high-performance liquid chromatography
839
Improved method for reliable predicting enthalpy of fusion of energetic compounds
840
IMPROVED METHOD FOR SELECTING SCALE FACTORS AND MODEL MATERIALS FOR SCALE MODELLING OF OUTDOOR SOUND PROPAGATION
841
Improved method for severe thermal shocks testing of ceramics by water quenching
842
Improved method for shipboard determination of iron in seawater by flow injection analysis Original Research Article
843
Improved method for simultaneous determination of l-arginine and its mono- and dimethylated metabolites in biological samples by high-performance liquid chromatography
844
Improved method for the conversion of pinacolboronic esters into trifluoroborate salts: facile synthesis of chiral secondary and tertiary trifluoroborates
845
Improved method for the determination of biogenic amines and polyamines in vegetable products by ion-pair high-performance liquid chromatography
846
Improved method for the determination of cyclic guanosine monophosphate (cGMP) in human plasma by LC–MS/MS
847
Improved Method for the Determination of Cypermethrin in Sarawak Soils
848
Improved method for the determination of kynurenic acid in rat plasma by column-switching HPLC with post-column fluorescence detection Original Research Article
849
Improved method for the determination of trace perchlorate in ground and drinking waters by ion chromatography
850
Improved method for the determination of zinc pyrithione in environmental water samples incorporating on-line extraction and preconcentration coupled with liquid chromatography atmospheric pressure chemical ionisation mass spectrometry
851
Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum
852
Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum Original Research Article
853
Improved method for the in vitro assessment of antioxidant activity of plant extracts by headspace solid-phase microextraction and gas chromatography–electron capture detection
854
Improved method for the measurement of large neutral amino acids in biological matrices
855
Improved method for the routine determination of acetylcholine and choline in brain microdialysate using a horseradish peroxidase column as the immobilized enzyme reactor
856
Improved method for the simultaneous determination of aflatoxins, ochratoxin A and Fusarium toxins in cereals and derived products by liquid chromatography–tandem mass spectrometry after multi-toxin immunoaffinity clean up
857
Improved method for the simultaneous determination of whey proteins, caseins and para-κ-casein in milk and dairy products by capillary electrophoresis
858
Improved method for the synthesis of (E)-cyclic-β-alkoxyacrylates under mild conditions
859
Improved method generating a free-form surface using integral equations Original Research Article
860
Improved method of an unusual conversion of aliphatic amines into alcohols
861
Improved method of bench solarization for the control of soilborne diseases in basil
862
Improved method of estimating deflection in prestressed steel I-beams
863
Improved method of estimating deflection in prestressed steel I-beams
864
Improved method of making soil monoliths using an acrylic bonding agent and proline auger
865
Improved method of measurement for tritiated water standardization by internal gas proportional counting
866
Improved method of sea level forecasting at Venice (Northern Adriatic Sea)
867
Improved method of the MALDI-TOF analysis of DNA with nanodot sample target plate
868
Improved method to demonstrate the structural integrity of high density fuel storage racks
869
Improved method to demonstrate the structural integrity of high density fuel storage racks Original Research Article
870
Improved Method to Increase AES System Speed
871
Improved method to measure aldehyde adducts to N-terminal valine in hemoglobin using 5-hydroxymethylfurfural and 2,5-furandialdehyde as model compounds
872
Improved method to quantitatively determine powerful odorant volatile thiols in wine by headspace solid-phase microextraction after derivatization
873
Improved methodologies for simulating unitary air conditioners at off-design conditions
874
Improved methodologies for synthesis of prenylated xanthones by microwave irradiation and combination of heterogeneous catalysis (K10 clay) with microwave irradiation
875
Improved methodologies for the calculation of critical eigenvalues in small signal stability analysis
876
Improved methodologies for the design of maneuver for stability and control simulations
877
Improved methodology for endurance time analysis: From time to seismic hazard return period
878
Improved methodology for generation of axial flux shapes in digital core protection systems
879
Improved methodology for the characterisation of transgenic Bt-11 maize cultivars using RP-HPLC profiles of albumin, globulin, prolamin, and glutelin protein fractions and chemometric analysis
880
Improved Methods for Approximating Node Weighted Steiner Trees and Connected Dominating Sets
881
Improved methods for bandwidth selection when estimating ROC curves
882
Improved methods for determination of rotational symmetries in macromolecules
883
Improved methods for determination of rotational symmetries in macromolecules
884
Improved methods for determining the concentration of 6-thioguanine nucleotides and 6-methylmercaptopurine nucleotides in blood
885
Improved methods for divisible load distribution on k-dimensional meshes using pipelined communications
886
Improved methods for elemental analysis of atmospheric aerosols for evaluating human health impacts of aerosols in East Asia
887
Improved methods for isolating and validating indigenous biomarkers in Precambrian rocks
888
Improved methods for mapped grids: Applied to highly excited vibrational states of diatomic molecules
889
Improved methods for selective dissolution of Mn oxides: applications for studying trace element associations
890
Improved methods for the extraction and analysis of isoflavones from soy-containing foods and nutritional supplements by reversed-phase high-performance liquid chromatography and liquid chromatography–mass spectrometry
891
Improved methods for the stereoselective synthesis of mannoheptosyl donors and their glycosides: toward the synthesis of the trisaccharide repeating unit of the Campylobacter jejuni RM1221 capsular polysaccharide
892
Improved methods for the synthesis and isolation of imidazolium based ionic salts
893
Improved methods for urinary atrazine mercapturate analysis—Assessment of an enzyme-linked immunosorbent assay (ELISA) and a novel liquid chromatography–mass spectrometry (LC–MS) method utilizing online solid phase extraction (SPE) Original Research Artic
894
Improved methods of assembly sequence determination for automatic assembly systems
895
Improved methods of measurement and analysis of conversion electron and β-particle spectra
896
Improved MEUF removal of naphthenic acids from produced water
897
Improved microcrystalline silicon TFTs
898
Improved micro-flame detection method for gas chromatography
899
Improved micro-flame detection method for gas chromatography Original Research Article
900
Improved microfluidic chip-based sequential-injection trapped-droplet array liquid–liquid extraction system for determination of aluminium
901
Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating
902
Improved micromachined column design and fluidic interconnects for programmed high-temperature gas chromatography separations
903
Improved microstructural features in screen printed NdBCO thick films on YSZ substrates
904
Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming
905
Improved microstructure of cement-based composites through the addition of rock wool particles
906
Improved microwave dielectric properties of B2O3-doped Nd(Co1/2Ti1/2)O3 ceramics with near zero temperature coefficient of resonant frequency
907
Improved microwave dielectric properties of Nd(Mg0.5Sn0.5)O3 ceramics by substituting Mg2+ with Zn2+
908
Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide
909
Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide Original Research Article
910
Improved microwave steam distillation apparatus for isolation of essential oils: Comparison with conventional steam distillation
911
Improved microwave-assisted wet digestion procedures for accurate Se determination in fish and shellfish by flow injection-hydride generation-atomic absorption spectrometry Original Research Article
912
Improved milk fouling simulation in a helical triple tube heat exchanger
913
Improved MILP models for two-machine flowshop with batch processing machines
914
Improved minima-hopping. TIP4P water clusters, with
915
Improved minimal augmentation procedure for the direct computation of critical points Original Research Article
916
Improved minimax estimation of powers of the variance of a multivariate normal distribution under the entropy loss function
917
IMPROVED MIRROR SOURCE METHOD IN ROOMACOUSTICS
918
Improved mixed model for longitudinal data analysis using shrinkage method
919
Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures
920
Improved mobility of the copper phthalocyanine thin-film transistor
921
Improved modal characterization of the constitutive parameters in multilayered plates
922
Improved Mode II delamination fracture toughness of composite materials by selective placement of protein-surface treated CNT
923
Improved model for calculating the coefficient of performance of a Peltier module
924
Improved model for improving the inter-instrument agreement of spectrocolorimeters Original Research Article
925
Improved model for mercury emission, transport and deposition
926
Improved model for plate-end shear of CFRP strengthened RC beams
927
Improved model for real-time substructuring testing system
928
Improved model for solute transport in heterogeneous porous media
929
Improved model for the analysis of air fluorescence induced by electrons
930
Improved model for the analysis of air fluorescence induced by electrons
931
Improved model for the analysis of back corona in pulse energised electrostatic precipitators
932
Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up
933
Improved model of multicomponent adsorption in reversed-phase liquid chromatography
934
Improved model prediction and RMPC design for LPV systems with bounded parameter changes
935
Improved model reduction and tuning of fractional-order controllers for analytical rule extraction with genetic programming
936
Improved model selection criteria for SETAR time series models
937
Improved model to determine turbine and compressor boundary conditions with the method of characteristics
938
Improved model to determine turbine and compressor boundary conditions with the method of characteristics
939
Improved modeling and solution methods for the multi-resource routing problem
940
Improved modeling by coupling imperfect models
941
Improved Modeling Capabilites with Reduced-Order Integration
942
Improved modeling of chamber transport for heavy-ion fusion
943
Improved modeling of chamber transport for heavy-ion fusion
944
Improved modeling of chamber transport for heavy-ion fusion
945
Improved modeling of clinical data with kernel methods
946
Improved modeling of flows down inclined planes
947
Improved modeling of microchannel plate response to hard X-rays
948
Improved modeling of microchannel plate response to hard X-rays
949
Improved Modeling of Side-Chain–Base Interactions and Plasticity in Protein–DNA Interface Design
950
Improved modeling of the effect of R-ratio on crack growth rate
951
Improved modelling of detachment and neutral-dominated regimes using the SOLPS B2–Eirene code
952
Improved modelling of downburst outflows for wind engineering applications using a cooling source approach
953
Improved modelling of ship SO2 emissions—a fuel-based approach
954
Improved modelling of the loading spectra using a mixture model approach
955
Improved modelling of the Messinian Salinity Crisis and conceptual implications
956
Improved modelling of the neutron spectrum for the ASP accelerator
957
Improved modelling of vapour-liquid equilibria up to the critical region. Application to the CO2CH4N2 system
958
Improved model-order reduction by using spacial information in moments
959
Improved models for fractal colloidal agglomeration: computationally efficient algorithms
960
Improved models for the prediction of activity coefficients in nearly athermal mixtures Part II. A theoretically-based GE-model based on the van der Waals partition function
961
Improved models of the piezomagnetic field for the 2011 Mw 9.0 Tohoku-oki earthquake
962
Improved models to predict gas–water relative permeability in fractures and porous media
963
Improved modification direction methods
964
Improved modification of the single-switch AC-AC converter for induction heating applications
965
Improved modular synthesis of thieno[3,2-b]pyrroles and thieno[2,3-b]pyrroles
966
Improved modules for the blanket of RTO/RC ITER
967
Improved moisture resistance of SrS:Eu2+ phosphors with nanoscale SiO2 coating
968
Improved moisture resistance of SrSO4:Sm3+ phosphors coated with SiO2
969
Improved molten carbonate fuel cell performance via reinforced thin anode
970
Improved molten salt synthesis (MSS) for SnO2 nanorods and nanotwins
971
Improved moment estimates for invariant measures of semilinear diffusions in Hilbert spaces and applications
972
Improved Moment Strength Prediction of Composite Steel Plate Girders in Positive Bending
973
Improved monitoring of batch processes by incorporating external information
974
Improved monitoring of HABs using autonomous underwater vehicles (AUV)
975
Improved monitoring of surface ozone by joint assimilation of geostationary satellite observations of ozone and CO
976
Improved monitoring of vegetation dynamics at very high latitudes: A new method using MODIS NDVI
977
Improved monochromatic loose cycle partitions in hypergraphs
978
Improved monodispersity of size selected aerosol particles with a new charging and selection scheme for tandem DMA setup
979
Improved Montgomery modular inverse algorithm
980
Improved mood states with lamotrigine in patients with epilepsy
981
Improved Morphological Method in Motion Detection
982
Improved Morphological, Structural, and Optical Features of ErxCuNiO3 {x= 0, 0.5, 0.7, 0.9}
983
Improved morphology of plated lithium in poly(vinylidene fluoride) based electrolyte
984
Improved motion information-based infrared dim target tracking algorithms
985
Improved mould-level control in a continuous steel casting line
986
Improved MPEG-4 still texture image coding under noisy environment
987
Improved MR image reconstruction from sparsely sampled scans based on neural networks
988
Improved MR imaging for patients with metallic implants☆
989
Improved multi-ant-colony algorithm for solving multi-objective vehicle routing problems
990
Improved Multibody Dynamics for Investigating Energy Dissipation in Train Collisions Based on Scaling Laws
991
Improved multi-camera smart tra system for resilient citiesc surveillance
992
Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation
993
Improved multi-level electronic structure methods (MLSEn + d) for atomization energies and reaction energy barriers
994
Improved multi-level Newton solvers for fully coupled multi-physics problems
995
Improved multilevel security with latent semantic indexing
996
Improved Multi-Mode anomalous transport module for tokamak plasmas Original Research Article
997
Improved multiple test procedures for discrete distributions: New ideas and analytical review
998
Improved multiquadric approximation for partial differential equations
999
Improved multiquadric method for elliptic partial differential equations via PDE collocation on the boundary
1000
Improved multislice calculations for including higher-order Laue zones effects
