بر اساس عنوان

1
Investigation of vibrational states of the ArHCl+ cation in the electronic ground state Original Research Article
2
Investigation of vibrational theory of olfaction with variously labelled benzaldehydes
3
Investigation of vibrotactile sensation of human fingerpads by observation of contact zones
4
Investigation of vinyl phosphonic acid/hydroxylated α-Al2O3(0 0 0 1) reaction enthalpies
5
Investigation of vinyl phosphonic acid/hydroxylated α-Al2O3(0 0 0 1) reaction enthalpies
6
Investigation of violence against emergency nurses in a referral university hospital in Southern Iran
7
Investigation of viral DNA packaging using molecular mechanics models Original Research Article
8
Investigation of Virulence Genes by PCR in Stapylococcus aureus Isolates Originated from Subclinical Bovine Mastitis in Turkey
9
Investigation of Virulence-Associated Genes and Cytolethal Distending Toxin Production in Campylobacter spp. Isolated from Broilers
10
Investigation of viruses infecting Lycopersicum esculentum in Iran and Molecular Analysis of Cucumber Mosaic Virus
11
Investigation of Visceral Leishmaniasis among 192 Dog Carcasses Killed by Road Accidents in Khorasan Razavi, North-eastern Iran during 2014-2016
12
Investigation of viscoelastic effect of molding compound on the warpage and stresses of a power plastic package
13
Investigation of viscoelastic effect of molding compound on the warpage and stresses of a power plastic package
14
Investigation of Visco-rheological Properties of Polymeric Fluid on Electrothermal Pumping
15
Investigation of viscosity and crystallization in supercooled-liquid region of Zr-based glassy alloys
16
INVESTIGATION OF VISCOSITY AND FUSIBILITY PROPERTIES IN ORDER TO OPTIMIZE COMPOSITIONS OF SLAG-FORMING MIXTURES USED FOR CONTINUOUS STEEL CASTING AT OAO MK AZOVSTAL
17
Investigation of Viscosity and Rheological Properties of Copper/Ethylene Glycol Nanofluid
18
Investigation of viscosity and thermal conductivity of SiC nanofluids for heat transfer applications
19
INVESTIGATION OF VISCOSITY OF R123-TIO2 NANOREFRIGERANT
20
Investigation of viscosity properties for rheology forming of AM50A magnesium alloy
21
Investigation of viscous fluid enforced flow within the annulue between coaxial revolving cylinders Original Research Article
22
Investigation of visible emission induced by infrared femtosecond pulses in erbium-doped YVO4 and LuVO4 single crystals
23
Investigation of visible light photocatalytic behavior of Bi4V2O11−δ and BIMEVOX (ME = Al, Ga) oxides
24
Investigation of VOC emissions from indoor and outdoor painting processes in shipyards
25
Investigation of vocal jitter and glottal flow spectrum as possible cues for depression and near-term suicidal risk
26
Investigation of Voice Disorder Symptoms and their Effects on the Job Performance of Elementary School Teachers
27
Investigation of void nucleation in Al–Mg sheet
28
Investigation of volatile biomarkers in lung cancer blood using solid-phase microextraction and capillary gas chromatography–mass spectrometry
29
Investigation of volatile organic compounds in office buildings in Bangkok, Thailand: Concentrations, sources, and occupant symptoms
30
Investigation of volatile organic metabolites in lung cancer pleural effusions by solid-phase microextraction and gas chromatography/mass spectrometry
31
Investigation of voltages and electric fields in silicon radiation detectors using a scanning electron microscope
32
Investigation of voltages and electric fields in silicon radiation detectors using a scanning electron microscope
33
Investigation of Voltammetric Behavior of 3-Nitro-Tyrosine and Tyrosine at Glassy Carbon and Carbon Paste Electrodes
34
Investigation of voltammetric enzyme-linked immunoassay based on a new system of HAP-H2O2-HRP
35
Investigation of Voltammetric Enzyme-Linked Immunoassay Based on a New System of OAP-H2O2-HRP
36
Investigation of Voltammetric Enzyme-Linked Immunoassay Based on a New System of OAP-H2O2-HRP
37
Investigation of voltammetric enzyme-linked immunoassay system based on N-heterocyclic substrate of 2,3-diaminopyridine
38
Investigation of Volume Changes in Carbon Dioxide Hydrate Formation Process
39
Investigation of Volumetric and Acoustic Properties of Ionic Liquid + Amino Acid + Water Systems at Different Temperatures
40
Investigation of volumetric fluid properties of (heptane + hexadecane) at reservoir conditions
41
Investigation of Volumetric Properties of Some Glycol Ethers Using a Simple Equation of State
42
Investigation of vortex dynamics close to Bc2 in Cu2Mo6S8 quasi epitaxial thin films
43
Investigation of Vortex Interaction in Canard-FSW Configurations Based on the Numerical Wind Tunnel Method
44
Investigation of vortex response of a twin box bridge section at high and low Reynolds numbers
45
Investigation of vortex-induced vibration of a suspension bridge with two separated steel box girders based on field measurements
46
Investigation of vortex-induced vibration phenomenon in verticallong circular slender structure with non-uniform flows
47
Investigation of W components exposed to high thermal and high H/He fluxes
48
Investigation of Wagon Derailment Moving on Cable-StayedBridge Due to Rail Irregularities
49
Investigation of wall bounded flows using SPH and the unified semi-analytical wall boundary conditions Original Research Article
50
Investigation of wall mass transfer characteristics downstream of an orifice
51
Investigation of wall stress and outflow rate in a flat-bottomed bin: A comparison of the DEM model results with the experimental measurements
52
Investigation of wall stress development and packing ratio distribution in the metal hydride reactor
53
Investigation of wall-function approximations and subgrid-scale models in large eddy simulation of separated flow in a channel with streamwise periodic constrictions
54
Investigation of wallʹs optimum insulation position from maximum time lag and minimum decrement factor point of view
55
INVESTIGATION OF WASTE HEAT ENERGY IN A MARINE ENGINE WITH TRANSCRITICAL ORGANIC RANKINE CYCLE
56
Investigation of wastewater resuse potential in Thessaly region, Greece Original Research Article
57
Investigation of water accumulation and discharge behaviors with variation of current density in PEMFC by high-resolution soft X-ray radiography
58
Investigation of Water Balance in Water Recovery of Closed Steam Injection Gas Turbine Cycles
59
Investigation of water cavitation peening-induced microstructures in the near-surface layer of pure titanium
60
Investigation of Water Circulation and Temperature Effect in Indian Ocean by Perturbation Method
61
Investigation of water content and dynamics of a Ricinus root system in unsaturated sand by means of SPRITE and CISS: correlation of root architecture and water content change
62
Investigation of water diffusion in poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) by generalized two-dimensional correlation ATR–FTIR spectroscopy
63
Investigation of water droplet carryover phenomena in industrial evaporative air-conditioning systems
64
Investigation of water droplet kinetics and optimization of channel geometry for PEM fuel cell cathodes
65
Investigation of water gas-shift activity of Pt–MOx–CeO2/Al2O3 (M = K, Ni, Co) using modular artificial neural networks
66
Investigation of Water Salinity Effect on Asphaltene Precipitation Using PC-SAFT EOS
67
Investigation of water seepage through porous media using X-ray imaging technique
68
Investigation of water separation from water-in-oil emulsion using electric field
69
Investigation of water signatures at gully-exposed sites on Mars by hyperspectral image analysis
70
Investigation of water transfer across thin layer biopolymer films by infrared spectroscopy
71
Investigation of water transport through membrane in a PEM fuel cell by water balance experiments
72
Investigation of water vapor on Mars with PFS/SW of Mars Express
73
Investigation of water vapour permeation and antibacterial properties of nano silver loaded cellulose acetate film
74
Investigation of water-assisted synthesis of high quality carbon nanotubes
75
Investigation of Water-Diesel Emulsion Characteristics using Optical Technique
76
Investigation of waterhammer in piping networks with voids containing non-condensable gas
77
Investigation of waterhammer in piping networks with voids containing non-condensable gas Original Research Article
78
Investigation of water–rock interactions in Cambrian black shale via a flow-through experiment
79
Investigation of water-soluble inclusion complex of hypericin with β-cyclodextrin polymer
80
INVESTIGATION OF WAVE-CURRENT INTERACTION BY FINITE ELEMENT METHOD
81
INVESTIGATION OF WAVE-CURRENT INTERACTION BY FINITE ELEMENT METHOD
82
INVESTIGATION OF WAVY FIN-AND-TUBE HEAT EXCHANGERS: A CONTRIBUTION TO DATABANK
83
Investigation of Wear Behavior of Biopolymers for Total Knee Replacements Through Invitro Experimentation
84
Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions
85
Investigation of wear induced surface and subsurface deformation in a linerless Al–Si engine
86
Investigation of Wear Mechanism in Quenched and Tempered Medium Carbon-High Chromium Martensitic Steel Using Dry Sand/Rubber Wheel
87
Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope
88
Investigation of wear pattern in a complex coal pulveriser using CFD modelling
89
Investigation of wear properties of magnesium and aluminum alloys for automotive applications
90
Investigation of wear surfaces in Si+-implanted uni-directionally aligned silicon nitride using TEM and XPS
91
Investigation of weight-on-wheel switch failure in F-16 aircraft
92
Investigation of weldability and property changes of high pressure heat-resistant cast stainless steel tubes used in pyrolysis furnaces after a five-year service
93
Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints
94
Investigation of Welding Parameters Effects on Residual Stresses of Resistance Spot Welding of AZ31 Alloy
95
Investigation of Well-Posedness of Solution for an IHCP
96
Investigation of West Nile virus among healthy blood donors in the western part of Turkey
97
Investigation of wet acidic deposition episodes capable of damaging red spruce in the Mt. Mitchell State Park
98
Investigation of wet spraying system to control dust pollution in mines (A case study )
99
Investigation of wettability alteration through relative permeability measurement during MEOR process: A micromodel study
100
Investigation of wheat straw biodegradation by Phanerochaete chrysosporium
101
Investigation of whisker orientation in SiC whisker-reinforced alumina composites using neutron diffraction
102
Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchrotron X-ray diffraction
103
Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchrotron X-ray diffraction
104
Investigation of whole blood lead level in urinary tract children patients by effective method based on aqueous standardization using flameless atomic absorption spectrometry
105
Investigation of wick debinding in metal injection molding: numerical simulations by the random walk approach and experiments
106
INVESTIGATION OF WICKING PROPERTIES OF NATURALLY-DYED LINEN FABRICS
107
Investigation of wind characteristics and assessment of wind energy potential for Waterloo region, Canada
108
Investigation of wind characteristics and assessment of wind-generation potentiality in Uludağ-Bursa, Turkey
109
Investigation of wind characteristics and wind energy potential at Ras Ghareb, Egypt
110
Investigation of wind characteristics and wind energy potential in Kirklareli, Turkey
111
Investigation of wind characteristics and wind energy potential in Osmaniye, Turkey
112
Investigation of wind energy application possibilities for a specific island (Bozcaada) in Turkey
113
Investigation of Wind energy potential in Zanjan province, Iran
114
Investigation of wind energy potential of Muradiye in Manisa, Turkey
115
Investigation of wind induced wave climate close to the Koohmobarak Area, Gulf of Oman
116
Investigation of wind power potential at Bozcaada, Turkey
117
Investigation of wind shear coefficients and their effect on electrical energy generation
118
Investigation of Wind Speed to Generate Energy Using Machine Learning Algorithms Approach Over Selected Nigerian Stations
119
Investigation of wind speeds over multiple two-dimensional hills
120
Investigation of wind speeds over multiple two-dimensional hills
121
Investigation of wind-induced response of uid-solid coupling system for high bent-type aqueduct
122
Investigation of WO3/ZnO thin-film heterojunction-based Schottky diodes for H2 gas sensing
123
Investigation of WO3-based potentiometric sensor performance (M/YSZ/WO3, M = Au, Pd, and TiO2) with varying counter electrode
124
INVESTIGATION of WOMEN’S INTEREST in SPORT
125
Investigation of Wood Properties at Elevated Temperature
126
Investigation of work softening mechanisms and texture in a hot deformed 6061 aluminum alloy at high temperature
127
Investigation of Workers’ Sleep Quality in GoleGohar Mineral Industries Co., Sirjan
128
Investigation of work-related disorders in truck drivers using RULA method
129
Investigation of Writing Performance of Secondary School Students with Hearing Impairments: Sample Group Study
130
Investigation of wüstite (Fe1−xO) by femtosecond laser assisted atom probe tomography
131
Investigation of wüstite (Fe1−xO) by femtosecond laser assisted atom probe tomography
132
Investigation of X-ray diffuse scattering in θ-(BEDT-TTF)2RbM’(SCN)4
133
Investigation of X-ray transient CICam as an unique star with the B[e] phenomenon
134
investigation of years of life lost caused by dust storm in western part of iran
135
Investigation of Years of Life Lost Caused by Dust Storm in Western Part of Iran
136
Investigation of Years of Life Lost Caused by Dust Storm in Western Part of Iran
137
Investigation of yield surface of monolithic and composite powders by explicit finite element simulation
138
Investigation of yield surface of monolithic and composite powders by explicit finite element simulation
139
Investigation of yield surface of monolithic and composite powders by explicit finite element simulation
140
Investigation of young water inflow in karst aquifers using SF6–CFC–3H/He–85Kr–39Ar and stable isotope components
141
Investigation of yttria-doped alumina nanocomposites reinforced by multi-walled carbon nanotubes
142
Investigation of Yucca Mountain repository capacity for the US spent nuclear fuel inventory
143
Investigation of Zayandeh River water quality based on Macrobenthos as biological indicators
144
Investigation of zinc binding metallothioneins’ polymerization in tris(hydroxymethyl)-aminomethane buffer by coupling of size exclusion chromatography with electrospray ionization mass spectrometry
145
Investigation of zinc powder modified by ultrasonic impregnation of rare earth lanthanum
146
Investigation of Zinc Release Kinetics in an Agricultural Calcareous Soil as Influenced by Applied Organic Materials and Salinity Using Mathematical Models
147
Investigation of Zinc Supplement Impact on the Serum Biochemical Parameters in Pulmonary Tuberculosis: A Double Blinded Placebo Control Trial
148
Investigation of ZnO Nanoparticles on In ‎Vitro Cultures of Coffee (Coffea Arabica ‎L.) ‎
149
Investigation of ZnO thin-film sensing properties for CO2 detection: effect of Mn doping
150
Investigation of ZnOrsapphire interface and formation of ZnO nanocrystalline by laser MBE
151
Investigation of ZnS–SiO2/Ag/ZnS–SiO2 as high stable transparent and conductive multilayer films
152
Investigation of ZPE and temperature effects on the Eley–Rideal recombination of hydrogen atoms on graphene using a multidimensional graphene–H–H potential
153
Investigation of ZrFe2-type materials for metal hydride hydrogen compressor systems by substituting Fe with Cr or V
154
Investigation of zwitterionic 7-ammonium-7,9-nido-m-carborane
155
Investigation of α platelet boundaries in a near-α titanium alloy
156
Investigation of α to γ transformation in the production of a nanostructured high-nitrogen austenitic stainless steel powder via mechanical alloying
157
Investigation of α2/γ phase transformation mechanism under the interaction of dislocation with lamellar interface in primary creep of lamellar TiAl alloys
158
Investigation of α2/γ phase transformation mechanism under the interaction of dislocation with lamellar interface in primary creep of lamellar TiAl alloys
159
Investigation of α-glucosidase inhibitory activity of wheat bran and germ
160
Investigation of α-induced reactions on the p nucleus image
161
Investigation of β-Sitosterol and Prangol Extracted from Achillea Tenoifolia Along with Whole Root Extract on Isolated Rat Pancreatic Islets
162
Investigation of ββ decay modes in 134Xe and 136Xe
163
INVESTIGATION OF ΔI = 1 LEVEL STAGGERING IN DOUBLY ODD TANTALUM NUCLEI
164
Investigation of π–π and ion–dipole interactions on 1-allyl-3-butylimidazolium ionic liquid-modified silica stationary phase in reversed-phase liquid chromatography
165
Investigation of63Ni diffusion along stationary and moving grain boundaries in Nb
166
Investigation of63Ni diffusion along stationary and moving grain boundaries in Nb
167
Investigation ofanewGRASP-basedclusteringalgorithmappliedtobiologicaldata
168
Investigation ofCavitation in Stepped Spillway of Siah-Bishe Dam by Using Flow-3d Model
169
Investigation on “saw-tooth” behavior of PEM fuel cell performance during shutdown and restart cycles
170
Investigation on 1.07 μm laser emission in Nd3+-doped sodium fluoroborate glasses
171
Investigation on 3-D characteristics of flow around a yawed and inclined circular cylinder
172
Investigation on a 1 kW traveling-wave thermoacoustic electrical generator
173
Investigation on a direct modeling strategy for the effective elastic moduli prediction of composite material
174
Investigation on a gray kaolin from south east India
175
Investigation on a novel reactor for gas hydrate production
176
Investigation on a novel ZnO/TiO2–B photocatalyst with enhanced visible photocatalytic activity
177
Investigation on a sensitive Au thin film deposited on different substrates: Physical analysis via FIB and chemical analysis via evaluation of Au sensitivity to Hg0
178
Investigation on a Stirling refrigerator with thermal buffer tube driven by an oil-lubricated compressor
179
Investigation on a temporal asymmetric oscillating temperature ratchet
180
Investigation on a thermal-coupled two-stage Stirling-type pulse tube cryocooler Original Research Article
181
Investigation on a thermoacoustically driven pulse tube cooler working at 80 K Original Research Article
182
Investigation on a two-stage solar liquid-desiccant (LiBr) dehumidification system assisted by CaCl2 solution
183
Investigation On Abrasive Water Jet Machining of Al-Al2O3 MMC
184
Investigation on abundant photovoltaic power generated by 40 kW PV system in Wakayama National College of Technology
185
Investigation on AC loss of a high temperature superconducting tri-axial cable depending on twist pitches Original Research Article
186
Investigation on acoustic holography reconstruction of scattering field of target
187
Investigation on Acute Biochemical Effects of Ce(NO3)3 on Liver and Kidney Tissues by MAS 1H NMR Spectroscopic-Based Metabonomic Approach
188
Investigation on addition of ZrO2-3 mol% Y2O3 powder on sintering behavior and mechanical properties of B4C
189
Investigation on adhesion, interphases, and failure behaviour of cyclic butylene terephthalate (CBT®)/glass fiber composites
190
Investigation on aerodynamic and structural countermeasures for cable-stayed bridge with 2-edge I-shaped girder
191
Investigation on Aerodynamic Behaviour of a SUV Car Model with Vortex Generators at Different Yaw Conditions
192
Investigation on Aerodynamic Robustness of Compressor Blade with Asymmetric Leading Edge
193
Investigation on aerodynamic stability of long-span suspension bridges under erection
194
Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
195
Investigation on Al(III) and Zn(II) complexes containing a calix[4]arene bearing two 8-oxyquinoline pendant arms used as emitting materials for OLEDs
196
Investigation on alcohol vapours/TiO2 nanocrystal thin films interaction by SPR technique for sensing application
197
Investigation on alternative depressants for iron ore flotation
198
Investigation on an environmentally friendly biobased untreated date palm fiber composite for thermal insulation
199
Investigation on an RFID planar coil for a wireless communicative aortic stent
200
Investigation on anthropogenic and natural share of heavy metals in surface sediments of Shadegan wetland
201
Investigation on Antibacterial Activity of Some Antibacterial
202
Investigation on anti-wear properties of sulfide layer on bearing steel lubricated by oil-containing FeS particles
203
Investigation on applicability of information theory to prediction of operator performance in diagnosis tasks at nuclear power plants
204
Investigation on applicability of various stress definitions in atomistic simulation
205
Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding
206
Investigation on arrangement and fusion behaviors of gold nanoparticles at the air/water interface
207
Investigation on artificial blood or substitute blood replace the natural blood
208
Investigation on artificial blood vessels prepared from bacterial cellulose
209
Investigation on ash deposit formation during the co-firing of coal with agricultural residues in a large-scale laboratory furnace
210
Investigation on bend displacement and surface quality induced by laser shock micro-adjustment
211
Investigation on bending fatigue failure of a micro-gear through finite element analysis
212
Investigation on bioactivity and cytotoxicity of mesoporous nano-composite MCM-48/hydroxyapatite for ibuprofen drug delivery
213
Investigation on bioavailability of rumen bacterial and protozoal phosphorus using a chick-model
214
Investigation on Biochemically Processed Castor Seed Meal in Nutrition and Physiology of Japanese Quails
215
Investigation on biological properties of tacrolimus-loaded poly(1,3-trimethylene carbonate) in vitro
216
Investigation on bio-mineralization of melt and sol–gel derived bioactive glasses
217
Investigation on blanking of thin sheet metal using the ductile fracture criterion and its experimental verification
218
Investigation on blockage boundary condition of dense-phase pneumatic conveying in bending slits
219
Investigation on boiler efficiency and pollutant emissions of water/heavy oil emulsions using edge-tone resonant homogenizer
220
Investigation on bonding between timber and ultra-high performance concrete (UHPC)
221
Investigation on boron carbide oxidation for nuclear reactor safety: Experiments in highly oxidising conditions
222
Investigation on buckling of FBR vessels under seismic loadings with fluid structure interactions Original Research Article
223
Investigation on Bursa Fabricius and Body Weights in Broiler and Local Chicks Vaccinated with Two Types of Infectious Bursal Disease Vaccines
224
Investigation on caloric requirement of biomass pyrolysis using TG–DSC analyzer
225
Investigation on capability of the reaming process using minimal quantity lubrication
226
Investigation on capacity fading of aqueous MnO2·nH2O electrochemical capacitor
227
Investigation on capacity matching in liquid desiccant and heat pump hybrid air-conditioning systems
228
Investigation on CAST, CAPN1 and CAPN3 porcine gene polymorphisms and expression in relation to post-mortem calpain activity in muscle and meat quality
229
Investigation on catalysts for the direct decomposition of nitrous oxide for waste anesthetic gas purification
230
Investigation on catalytic pyrolysis of pine sawdust: Catalyst screening by Py-GC-MIP-AED
231
Investigation on catalytic pyrolysis of pine sawdust: Catalyst screening by Py-GC-MIP-AED
232
Investigation on catalyzed combustion of high ash coal by thermogravimetric analysis
233
Investigation on catalyzed combustion of wheat straw by thermal analysis
234
Investigation on catechin as a beech wood decay biomarker
235
Investigation on cationic ring-opening polymerization of 1,5,7,11-tetraoxaspiro [5,5] undecane in the presence of low molecular weight tetraols
236
Investigation on cell biocompatible behaviors of polyaniline film fabricated via electroless surface polymerization
237
Investigation on cell death in the megagametophyte of Araucaria bidwillii Hook. post-germinated seeds
238
INVESTIGATION ON CENTRIFUGAL SLURRY PUMP PERFORMANCE WITH VARIATION OF OPERATING SPEED
239
Investigation on changes in surface composition of float glass––mechanisms and effects on the mechanical properties
240
Investigation on chaotic motion in hysteretic non-linear suspension system with multi-frequency excitations
241
Investigation on characteristics of exhaust and evaporative emissions from passenger cars fueled with gasoline/methanol blends
242
Investigation on characteristics of IDBD plasma
243
Investigation on characteristics of ionization current in a spark-ignition engine fueled with natural gas–hydrogen blends with BSS de-noising method
244
Investigation on charge transfer bands of Ce4+ in Sr2CeO4 blue phosphor
245
Investigation on charging processes and phosphorescent efficiency of SrAl2O4:Eu,Dy
246
Investigation on chemical reaction between LiAlH4 and LiNH2
247
Investigation on chemical structure of minerals in coal using 27Al MQMAS NMR
248
Investigation on Climate Change in Meteorological Stations of Guilan Province and its Impacts on Water Balance
249
Investigation on CNT/alumina interface properties using molecular mechanics simulations
250
Investigation on CO2-induced plasticization in polycarbonate membrane using positron annihilation lifetime spectroscopy
251
Investigation on Co-Combustion Kinetics of Anthracite and Waste Plastics by Thermogravimetric Analysis Original Research Article
252
Investigation on cold-drawn gold bonding wire with serial and reverse-direction drawing
253
Investigation on cold-formed steel lipped channel built-up I beam with intermediate web stiffener
254
Investigation on Color-Finishing Process Conditions for Titanium Alloy applying a New Electrical Grinding Process
255
Investigation on combustion and emissions of DME/gasoline mixtures in a spark-ignition engine
256
Investigation on combustion characteristics and emissions of diesel/hydrogen mixtures by using energy-share method in a diesel engine
257
Investigation on combustion of fire retardant board under different N2–O2 mixture gas atmospheres by using thermogravimetric analysis
258
Investigation on comparisons between two analytical models of sandwich sheet rolling bonded before rolling
259
Investigation on compliance rotation correction for compact tensile specimen in unloading compliance method
260
Investigation on composite S-PEEK/H-BETA MEAs for medium temperature PEFC
261
Investigation on Composition and Microstructural Morphology of the Fe-B-C Hardfacing Layers
262
Investigation on Composition, Mechanical Properties, and Corrosion Resistance of Mg-0.5Ca-X(Sr, Zr, Sn) Biological Alloy
263
Investigation on compounding and application of C80–C100 high-performance concrete
264
Investigation on compression behaviour of highly compacted GMZ01 bentonite with suction and temperature control
265
Investigation on compressive behaviors of thermoplastic pipe confined concrete
266
Investigation on concentration of elements in wetland sediments and aquatic plants
267
Investigation on concrete compressive strength mixed with sand contaminated by crude oil products
268
Investigation on conformational order and mobility of DiamondBond-C18 and C18-alkyl modified silica gels by Fourier transform infrared and solid-state NMR spectroscopy
269
Investigation on controlling ice adhesion force to solid surface by using thin film made from silane-coupler
270
Investigation on cooling efficiency of grinding fluids in deep grinding
271
Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands
272
Investigation on corrosion and galvanic corrosion in LaFe11.6Si1.4 alloy
273
Investigation on corrosion and wear behaviors of nanoparticles reinforced Ni-based composite alloying layer
274
Investigation on corrosion behavior of sputter-deposited nanocrystalline (MoxCr1−x)5Si3 films by double cathode glow plasma
275
Investigation on corrosion control of mild steel buried in soil by spent FCC catalyst coating
276
Investigation on corrosion fatigue crack growth rate in 7075 aluminum alloy
277
Investigation on corrosion of yttrium-doped magnesium-based sacrificial anode in ground grid protection
278
Investigation on cotton stalk and bamboo sawdust carbonization for barbecue charcoal preparation
279
Investigation on Counterfeit Glucosamine and Chondroitin Products in Iranian Pharmaceutical Markets
280
Investigation on crack propagation law of ultra-high toughness cementitious composites under fatigue flexure
281
Investigation on cracking behavior of Ni-based coating by laser-induction hybrid cladding
282
Investigation on cracking mechanism of austenite stainless steel during in situ tension in transmission electron microscope
283
Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing
284
Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting
285
Investigation on Crystallinity Behavior of the Polylactic Acid and Poly-3-hydroxybutyrate Bio-based Polymers in the Presence of the Pyromellitic Anhydride
286
Investigation on crystallization and influence of Nd3+ doping of transparent oxyfluoride glass-ceramics
287
Investigation on crystallization kinetics and microstructure of novel transparent glass ceramics containing Nd:NaYF4 nano-crystals
288
Investigation on crystallization of TiO2–water nanofluids and deionized water
289
Investigation on damage of BSA molecules under irradiation of low frequency ultrasound in the presence of FeIII-tartrate complexes
290
Investigation on damage of BSA molecules under irradiation of low frequency ultrasound in the presence of FeIII-tartrate complexes
291
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
292
Investigation on damage of DNA molecules under irradiation of low frequency ultrasound in the presence of hematoporphyrin–gallium (HP–Ga) complex
293
Investigation on Daylight Quality of Central Courtyard’s Adjacent Rooms in Traditional Houses in Hot Dry Region of Iran: A Case Study Yazdanpanah House
294
Investigation on defect distribution and its statistical evaluation for case hardened material states
295
Investigation on deformation behavior of sheet metals in viscous pressure bulging based on ESPI
296
Investigation on degradation mechanism of ion exchange membrane immersed in highly concentrated tritiated water under the Broader Approach Activities
297
Investigation on degradation of dyestuff wastewater using visible light in the presence of a novel nano TiO2 catalyst doped with upconversion luminescence agent
298
Investigation on degradation of polyethylene to oil in a continuous supercritical water reactor
299
Investigation on degradation of polyethylene to oils in supercritical water
300
Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads
301
Investigation on Determinants and Choice of Contraceptive Usage among Nigeria Women of Reproductive Age
302
Investigation on determination of loading path to enhance formability in tube hydroforming process using APDL
303
INVESTIGATION ON DETERMINING THE COEFFICIENT OF THERMAL CONDUCTIVITY TO TEXTILE MATERIALS RECOVERABLE, USED FOR THERMAL PROTECTION OF HOT PIPELINES
304
Investigation on development of free-surface structures in turbulent liquid lithium flow
305
Investigation on dielectric properties of the polyetherketone nanocomposite with lead titanate ultrafines
306
Investigation on dielectric relaxations of PVP–NH4SCN polymer electrolyte
307
Investigation on different ESD protection strategies devoted to 3.3 V RF applications (2 GHz) in a 0.18 μm CMOS process
308
Investigation on different oxides as candidates for nano-sized ODS particles in reduced-activation ferritic (RAF) steels
309
Investigation on diffusion bonding characteristics of aluminum metal matrix composites (Al/SiCp) with pure aluminum for different heat treatments
310
Investigation on diffusion bonding of functionally graded WC–Co/Ni composite and stainless steel
311
Investigation on Digital Algorithm for On-Line Monitoring and Diagnostics of Metal Oxide Surge Arrester Based on an Accurate Model
312
Investigation on disassociation of porphyrin J-aggregates induced by β-cyclodextrins using absorption and fluorescence spectroscopy
313
Investigation on dispermic androgenesis in sturgeon fish. The first successful production of androgenetic sturgeons with cryopreserved sperm
314
Investigation on dispersion of optical constants of Gd2O3 films by phase modulated spectroscopic ellipsometry
315
Investigation on dispersive optical constants and electrical properties of CuIn5S8 thin films
316
Investigation on distribution of airborne fungi in outdoor environment in Tehran, Iran
317
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
318
Investigation on DNA assembly to neutral red-cyclodextrin complex by molecular spectroscopy
319
INVESTIGATION ON DOPPLER SPECTRAL CHARACTERISTICS OF ELECTROMAGNETIC BACKSCATTERED ECHOES FROM DYNAMIC NONLINEAR SURFACES OF FINITE-DEPTH SEA
320
Investigation on downwind short-range transport of pesticides after application in agricultural crops
321
Investigation on Dracaena Sanderiana PhytoremeDiation Ability for Hg and Cd using Multivariate Optimized Task Specific Ionic liquid-based Dispersive liquid-liquid Microextraction
322
Investigation on drag characteristics of heavy oil flowing through horizontal pipe under the action of aqueous foam
323
Investigation on droplet impingement erosion during steam generator tube failure accident
324
Investigation on drying of middle distillate by Pervaporation Original Research Article
325
Investigation on Durability of Copper Nano Particles on Cotton Fiber
326
Investigation on dynamic performance and parameter optimization design of pantograph and catenary system
327
Investigation on dynamic recrystallization using a modified cellular automaton
328
Investigation on dynamics of double emulsion droplet in a uniform electric field
329
Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends
330
Investigation on effect of ambient pressure in wire explosion process for synthesis of copper nanoparticles by optical emission spectroscopy
331
Investigation on effect of methylene spacer in holographic grating formation in eosin containing polymethacrylates
332
Investigation on effect of surface topography of pad/disc assembly on squeal generation
333
Investigation on Effect of Train Speed in Displacement of Railway Ballasted Track with Unsupported Sleepers
334
Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading
335
Investigation on effect of wheat residue management using different tillage and nitrogen fertilizer on maize yield in the north of khuzestan
336
Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine
337
Investigation on effective factors in drying time Iranian rice varieties in fluidized bed dryer
338
Investigation on Effectiveness of Suggestion System Settlement in Yazd Gas Company and Method Offered for Developing Improvement
339
Investigation on Effects of Calcium Nitrate, Calcium Sulfate (soil application) and Calcium chelate as Foliar spray on Endocarp Lesion Disorder and Some Qualitative Characteristics of pistachio nut Cv
340
Investigation on Effects of Environmental and Soil Factors on Establishment of Vegetation Types (Case Study: Sabzdasht, Bafgh)
341
Investigation on effects of surface morphologies on response of LPG sensor based on nanostructured copper ferrite system
342
Investigation on electrical transport, CO sensing characteristics and mechanism for nanocrystalline La1−xCaxFeO3 sensors
343
Investigation on electrochemical performances of melt-spun nanocrystalline and amorphous Mg2Ni1−xMnx (x = 0–0.4) electrode alloys
344
Investigation on Electromagnetic Properties of PLA/Carbon/Copper Antennas for Breast Cancer Detection
345
Investigation on electromechanical properties of A-site donor rare-earth modified tetragonal (4 mm) lead barium niobate (PBN55) ceramics Original Research Article
346
Investigation on electronic structures and nature of charge-transfer transition of ZnO:Co with variation of Co content
347
Investigation on electronic transport property of cerium nitride nanoribbon-based molecular device: a first-principles study
348
Investigation on electronic, mechanical and thermal properties of Hf–H system
349
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
350
Investigation on elemental and isotopic fractionation during 196 nm femtosecond laser ablation multiple collector inductively coupled plasma mass spectrometry
351
Investigation on elemental mercury oxidation mechanism by non-thermal plasma treatment
352
Investigation on energy conservation in thermoplastics production
353
Investigation on energy transfer from Er3+ to Nd3+ in tellurite glass
354
Investigation on enhanced chemiluminescence reaction systems with bis(hydrogenperiodato) argentate(III) complex anion for fluoroquinolones synthetic antibiotics
355
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
356
Investigation on environmental assisted fracture behavior of iron aluminides using moire interferometry
357
Investigation on enzymatic degradation of γ-polyglutamic acid from Bacillus subtilis NX-2
358
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy
359
Investigation on estrogen receptor alpha gene polymorphisms in Iranian women with recurrent pregnancy loss
360
INVESTIGATION ON EXPANSION OF MORTARS CONTAINING TUFF NATURAL POZZOLAN DUE TO SULFATE ATTACK
361
Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti–6Al–4V after shot peening
362
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
363
Investigation on extraction rate of lanthanides with extractant-impregnated microcapsule
364
Investigation on fabricating continuous vivid sharkskin surface by bio-replicated rolling method
365
Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
366
Investigation on feasibility of ionic liquids used in solar liquid desiccant air conditioning system
367
Investigation on feasibility of manufacturing “Carton board” from recycled beverage carton (Tetra Pak containers) without using resin
368
Investigation on feasibility to predict the content of saturate plus mono-nuclear aromatic hydrocarbons in vacuum gas oils from bulk properties and empirical correlations
369
Investigation on Fe-doped ZnO nanostructures prepared by a chemical route
370
Investigation on female mate choice in horses and possible association with the MHC
371
Investigation on female mate choice in horses and possible association with the MHC
372
Investigation on femtosecond laser irradiation energy in inducing hydrophobic polymer surfaces
373
Investigation on ferromagnetic and ferroelectric properties of (La, K)-doped BiFeO3–BaTiO3 solid solution
374
Investigation on field emission properties of graphdiyne–BN composite
375
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
376
Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound
377
Investigation on flip chip solder joint fatigue with cure-dependent underfill properties
378
Investigation on Flow Characteristics and Parameters Optimization of a New Concept of TC Nozzle
379
Investigation on Flow Characteristics and Performance Estimation of a Hybrid SVC Nozzle
380
Investigation on flow characteristics of generic car body with different boundary conditions
381
Investigation on Flow Characteristics of SVC Nozzles
382
Investigation on fluorescence quenching of dyes by graphite oxide and graphene
383
Investigation on flying plate diameter to thickness ratio influence on damage pattern and spall signal
384
Investigation on foaming properties of some organics for oily bubble bitumen flotation
385
Investigation on forced convective heat transfer of molten salts in circular tubes
386
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming
387
Investigation on formaldehyde gas sensor with ZnO thick film prepared through microwave heating method
388
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process
389
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of porous Zr-rich lead zirconate titante ceramics
390
Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of pulsed laser deposited Pb(Zr0.93Ti0.07)O3 thin films
391
Investigation on Fracture Behavior of Armor Ceramics Against HEAT Penetration
392
Investigation on friction and wear behaviors of FeS films on L6 steel surface
393
Investigation on fuel-rich premixed flames of monocyclic aromatic hydrocarbons: Part I. Intermediate identification and mass spectrometric analysis
394
Investigation on gait time series by means of factorial moments
395
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
396
Investigation on gamma-ray position sensitivity at 662 keV in a spectroscopic 3” x 3” LaBr3:Ce scintillator
397
Investigation on gasoline deep desulfurization for fuel cell applications
398
Investigation on gasoline homogeneous charge compression ignition (HCCI) combustion implemented by residual gas trapping combined with intake preheating through waste heat recovery
399
Investigation on generated power of thermoelectric roof solar collector
400
Investigation on giant optical activity of piezoelectric crystals with langasite structure
401
Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining
402
Investigation on glycosylation patterns of proteins from human liver cancer cell lines based on the multiplexed proteomics technology
403
Investigation on grain refinement and precipitation strengthening applied in high speed wire rod containing vanadium
404
Investigation on Grease Elastohydrodynamic Lubrication
405
Investigation on Grinding Characteristics and Surface-Modifying Effects of Biocompatible Co-Cr Alloy
406
INVESTIGATION ON GROWTH AND CHARACTERIZATION OF NONLINEAR OPTICAL DICHLORO-DIGLYCINE ZINC II SINGLE CRYSTAL
407
Investigation on growth modes of GaN layers grown by LIRE
408
Investigation on growth process and tribological behavior of mixed alkylsilane self-assembled molecular films in aqueous solution
409
Investigation on growth, structural, optical, thermal, dielectric and mechanical properties of organic l-prolinium trichloroacetate single crystals
410
Investigation on Habit Formation, Risk Aversion and Intertemporal Substitution in Consumption of Iranian Households by GMM Approach
411
Investigation on heat and mass transfer in 3D woven fibrous material
412
Investigation on heat and mass transfer in 3D woven fibrous material [Int. J. Heat Mass Transfer 54 (2011) 3575–3586]
413
Investigation on heat and mass transfer in hygroscopic random charged fiber webs
414
Investigation on heat transfer and pressure drop during swirl flow boiling of R-134a in a horizontal tube
415
Investigation on heat transfer around buried coils of pile foundation heat exchangers for ground-coupled heat pump applications
416
Investigation on heat transfer characteristics of aircraft icing including runback water
417
Investigation on heat transfer characteristics of tapered cylinder pin fin heat sinks
418
Investigation on heat transfer evaluation for a more efficient two-zone combustion model in the case of natural gas SI engines
419
Investigation on heat transfer non-uniformity in rod bundle
420
Investigation on heat transfer properties of slurry of stabilized paraffin during a melting process
421
Investigation on heavy crude-water two phase flow and related flow characteristics
422
Investigation on heavy liquid metal cooling of ADS fuel pin assemblies
423
Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films
424
Investigation on high NF permeate recovery and scaling potential prediction in NF–SWRO integrated membrane operation Original Research Article
425
Investigation on high temperature short-term creep and stress relaxation of titanium alloy
426
Investigation on High Temperature Wear Resistance of Cryotreated Hot Work Tool Steel
427
Investigation on highly ordered porous anodic alumina membranes formed by high electric field anodization
428
Investigation on high-pressure metal hydride hydrogen compressors
429
Investigation on hole drift mobility in poly(n-hexylphenylsilane)
430
Investigation on Host Finding Behavior of the Two Parasitoids of Potato Tuber Moth in a Flight Tunnel
431
Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates
432
Investigation on hot deformation behavior of AISI T1 high-speed steel
433
INVESTIGATION ON HOT DEFORMATION BEHAVIOR OF AL-CU-MG-PB ALLOY
434
Investigation on hot deformation behavior of P/M Ni-base superalloy FGH96 by using processing maps
435
Investigation on hot deformation behavior of Waspaloy
436
Investigation on hot forming limits of high strength steel 22MnB5
437
Investigation on Hot Tearing Susceptibility of A201 Aluminum Alloy in Different Ingate Velocities and Molds
438
Investigation on hot-dip aluminised and subsequent HIPʹped steel sheets
439
Investigation on hot-fatigue behaviors of gradient thermal barrier coatings by EB-PVD
440
Investigation on hybrid cascaded multilevel inverter with reduced dc sources
441
Investigation on hydrogen annealing effect for various ferroelectric films by electrostatic force microscope
442
Investigation on hydrogen induced cracking behaviors of Ni-base alloy
443
Investigation on hydrogen production by catalytic steam reforming of maize stalk fast pyrolysis bio-oil
444
Investigation on hydrogen production using multicomponent aluminum alloys at mild conditions and its mechanism
445
Investigation on hydrophobic films from a hydrophobic powder
446
Investigation on idle performance of a spark-ignited ethanol engine with dimethyl ether addition
447
Investigation on improved Gabor order tracking technique and its applications
448
Investigation on in vitro dissolution rate enhancement of indomethacin by using a novel carrier sucrose fatty acid ester
449
Investigation on Incidence of Marekʹʹs Disease in Broiler Flocks of some Regions in Tehran Province, Iran
450
Investigation on incomplete condensation of non-azeotropic working fluids in high temperature heat pumps
451
Investigation on induction heating for hot stamping of boron alloyed steels
452
Investigation on Industrial Distribution in Cities of Iran
453
Investigation on Infectious coryza of layer chicken in Bangladesh with isolation, identification and antibiogram study
454
Investigation on Infectious Dropsy of Indian Major Carps
455
Investigation on influence factors of buffeting response of bridges and its aeroelastic model verification for Xiaoguan Bridge
456
Investigation on influence of dynamic strain ageing on fatigue crack growth behaviour of modified 9Cr–1Mo steel
457
Investigation on influence of sodium- or strontium-modification on corrosion-resistance of Al–11.7%Si alloy
458
Investigation on Influences of Synthesis Methods on the Magnetic Properties of Trimetallic Nanoparticles of Iron-Cobalt- Manganese Supported by Magnesium Oxide
459
Investigation on infrared laser absorption spectroscopy measurement of acetylene trace quantities
460
Investigation on initial stage of rapid pyrolysis at high pressure using Taiheiyo coal in dense phase
461
Investigation on Instability of RayleighBenard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition
462
Investigation on intelligent building standard communication protocols and application of IT technologies
463
Investigation on inter molecular complexation between 4,4′-methylene-bis(N,N-dimethylaniline) and β-cyclodextrin: Preparation and characterization in aqueous medium and solid state
464
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
465
Investigation on interface atomic state in compacted NiFe2O4 nanocrystalline by Mِssbauer spectroscopy
466
Investigation on interface barrier of Au–CdZnTe contacts
467
Investigation on interface barrier of Au–CdZnTe contacts
468
Investigation on interface resistance between alternating layers in the upper of blast furnace
469
Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique
470
Investigation on interfacial adhesion of Ti–6Al–4V/nitride coatings
471
Investigation on interfacial interaction of flame retarded and glass fiber reinforced PA66 composites by IGC/DSC/SEM
472
Investigation on interferon alpha-inducible protein 6 (IFI6) gene as a candidate for meat and carcass quality in pig
473
Investigation on interior moisture distribution inducing dielectric anisotropy of coals
474
Investigation on Interval Edge-Colorings of Graphs
475
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O (BO3)3 crystal
476
Investigation on intracavity second-harmonic generation of a new Li-doped GdCa4O(BO3)3 crystal
477
Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)
478
Investigation on isobaric vapor–liquid equilibrium for acetic acid + water + methyl ethyl ketone + isopropyl acetate
479
Investigation on Jet Characteristics of Turbofan Exhaust System under Take-off Condition with High Angle of Attack
480
Investigation on key properties controlling early-age stress development of blended cement concrete
481
Investigation on kinetic processes of fabrication of honeycomb-patterned polystyrene film and adsorption of surfactant by quartz crystal microbalance in impedance analysis method
482
Investigation on kinetics mechanism of hydrogen absorption in the La2Mg17-based composites
483
Investigation on lactation persistency and IGF-I gene polymorphisms in dairy sheep
484
Investigation on Laf3/Si Structure as Light-Addressable Potentiometric Fluoride (Fˉ) Sensor
485
Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle
486
Investigation on lap-joint behaviour of GFRP plates bonded to silica fume and rice husk ash concrete
487
Investigation on levels of blood homosystem in aged male hypertensive patients with low extremity atherosclerosis disease
488
Investigation on life cycle assessment oflead and zinc production
489
Investigation on LiNaSO4–Al2O3 ceramics as electrolytes for H2/O2 fuel cells
490
Investigation on lipase-catalyzed solution polymerization of cyclic carbonate
491
Investigation on lithium de-intercalation mechanism for LiNi0.45Mn0.45Al0.1O2
492
Investigation on lithium/polymer electrolyte interface for high performance lithium rechargeable batteries
493
Investigation on lithium–polymer electrolyte batteries
494
Investigation on local scour downstream of adverse stilling basins
495
Investigation on long-term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700 °C
496
Investigation on low loss (1–x) Mg0.95Co0.05TiO3–(x) Ca0.6La0.8/3TiO3 composite series for achieving a nearly zero temperature coefficient of resonant frequency
497
Investigation on low room-temperature resistivity Cr/(Ba0.85Pb0.15)TiO3 positive temperature coefficient composites
498
Investigation on L-shell X-ray fluorescence parameters for heavy elements and compounds
499
Investigation on luminescence and NOx removal by pulse corona discharges
500
Investigation on luminescence properties of Ln3+ doped Sr3EuMgSi2O8 (Ln=Dy, Er, Ho)
501
Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
502
Investigation on magnetorheological elastomers based on natural rubber
503
Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni–Mn–In alloys
504
Investigation on material properties and surface characteristics related to tyre–road noise for thin layer surfacings
505
Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell
506
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying
507
Investigation on Mechanical Behavior of Embedded Geocell in Geocell-Reinforced Railway Embankment
508
Investigation on mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal-matrix composites
509
Investigation on Mechanical Properties of Hybrid Polymer Composite Reinforced by Rice Husks and Date Palm Fibers as a Construction Material
510
Investigation on mechanical properties of P92 steel using ball indentation technique
511
Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a micro-indentation testing
512
Investigation on Mechanism of Altitude Characteristic for Air-breathing Pulsed Laser Thruster
513
Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits
514
Investigation on mechanism of magnetization reversal for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element methods
515
Investigation on mechanism of metal foil surface finishing with vibration-assisted micro-forging
516
Investigation on mechanism of photocatalytic activity enhancement of nanometer cerium-doped titania
517
Investigation on mechanochemical synthesis of Al2O3/BN nanocomposite by aluminothermic reaction
518
Investigation on meniscus shape and flow characteristics in open rectangular microgrooves heat sinks with micro-PIV
519
Investigation on metabolism of cisplatin resistant ovarian cancer using a genome scale metabolic model and microarray data
520
Investigation on metal elements in the brain tissues from DNTC patients
521
Investigation on Metallurgical Factors Controlling Charpy Impact Toughness in 1Cr21Ni5Ti Duplex Stainless Steel Original Research Article
522
Investigation on metals (V, Ni, and Fe) accumulation in the collection site of oil sludge
523
Investigation on methods for dealing with pile-up errors in evaluating the mechanical properties of thin metal films at sub-micron scale on hard substrates by nanoindentation technique
524
Investigation on microbial deterioration of exquisite collection of old manuscripts in Iran
525
Investigation on micro-perforated panel absorber with ultra-micro perforations
526
INVESTIGATION ON MICROSTRIP PATCH FRACTAL ANTENNA
527
Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding
528
Investigation on microstructure and creep properties of as-cast and aging-treated Mg–6Sn–5Al–2Si alloy
529
Investigation on microstructure and hydrogen generation performance of Al-rich alloys
530
Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering
531
Investigation on microstructure and mechanical properties of Al–Zn composite during accumulative roll bonding (ARB) process
532
Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer
533
Investigation on microstructure and properties of CrAlN/AlON nanomultilayers
534
Investigation on Microstructure and Wear Resistance of the Plain Carbon Steel Hardfaced by the Fe-Cr-C Electrodes Containing Mo, W, V Elements
535
Investigation on microstructure characterization and property of rapidly solidified Mg–Zn–Ca–Ce–La alloys
536
Investigation on Microstructure Evolution of a Semi-Austenitic Stainless Steel Through Hot Deformation
537
Investigation on Microstructure, Lattice and Structural Chemistry of Biogenic Silver Nanoparticles
538
Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment
539
Investigation on microstructures and electrochemical performances of hydrogen storage alloys
540
Investigation on Microstructures and Mechanical Properties ofthe Hypoeutectic Al-10Si-0.8Fe-XEr Alloy
541
Investigation on microstructures of NiO–YSZ composite and Ni–YSZ cermet for SOFCs
542
Investigation on microtribological behavior of thin films using friction force microscopy
543
Investigation on minerals migration during co-firing of different straw/coal blending ratios
544
Investigation on mode III interlaminar fracture of glass/epoxy laminates using a modified split cantilever beam test
545
Investigation on molar mass, solubility and enzymatic fragmentation of xylans by multi-detected SEC chromatography
546
Investigation on molecular interactions of nicotinamide in aqueous citric acid monohydrate solutions with reference to manifestation of partial molar volume and viscosity B-coefficient measurements
547
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
548
Investigation on monotonic and cyclic stress–strain characteristics of Ti–2Al–2.5Zr alloy
549
Investigation on Mosquitoes Fauna (Diptera: Culicidae) and Probable Vector of West Nile Virus in Lorestan Province, Western Iran
550
Investigation on multi-element Ni–Cr–Mo–Cu alloying layer by double glow plasma alloying technique
551
INVESTIGATION ON MYCOFLORA OF POULTRY BREEDING HOUSES’ AIR AND STUDYING THE EFFICACY OF SPRAYING AND FUMIGATION ON INACTIVATING THE AIRSPORA
552
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
553
Investigation on nanobubbles on graphite substrate produced by the water–NaCl solution replacement
554
Investigation on nanocrystalline copper-doped zirconia thin films for optical sensing of carbon monoxide at high temperature
555
Investigation on nano-frictional performance of glucose-assisted ZnO sol–gel film on quartz substrate
556
Investigation on native vesicles containing the nicotinic acetylcholine receptor using FTIR-spectroscopy
557
Investigation on Natural Color Extraction from Black Tea Waste
558
Investigation on near-boundary solutions by singular boundary method
559
Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulate
560
Investigation on non-circular hydraulic jumps formed due to obliquely impinging circular liquid jets Pages 1429-1439
561
Investigation on non-conventional honing of sculptured surfaces for parts made of alloy steel
562
Investigation on nonequlibrium radiation and relaxation phenomena in shock tubes
563
Investigation on nonlinear optical properties of ladder-structure polydiacetylenes derivatives by using the elongation finite-field method
564
Investigation on Non-Metallic Inclusions in LCAK Steel Produced by BOF-LF-FTSC Production Route Original Research Article
565
Investigation on nonradiative decay of 4I13/2→4I15/2 transition of Er3+-doped oxide glasses
566
Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles
567
Investigation on NOx adsorption in [M′]-MAPO-5 (M = Si, Ti; M′ = Ag, Cu) by density functional theory calculation
568
Investigation on nutrients uptake of henna ecotypes under deficit irrigation and nitrogen
569
Investigation on Ochratoxin A stability using different extraction techniques
570
Investigation on one-pot hydrothermal synthesis, structural and optical properties of ZnS quantum dots
571
Investigation on operational characteristics of a miniature automatic cooling device
572
Investigation on optical absorption properties of electrochemically formed porous InP using photoelectric conversion devices
573
Investigation on optical properties in the surface of KClxBr1-x mixed crystals irradiated to gamma radiation (A new approach)
574
Investigation on optical properties of NiMn2O4 films by spectroscopic ellipsometry
575
Investigation on optical properties of ZnO nanowires by electron energy-loss spectroscopy
576
Investigation on optical transmission spectra of (1−x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 single crystals
577
Investigation on optimal working fluid inventory of a cryogenic loop heat pipe
578
Investigation on organic pollutants from a domestic heating system using various solid biofuels
579
Investigation on Organochlorine Pesticides Residues and Trace Metals in Melon (Colocynthis citrollus L.): A Survey
580
Investigation on origin of excess noise in superconducting and normal state BiSrCaCuO films
581
Investigation on PA/PP mixture properties by means of DMTA method
582
Investigation on packaging parameters of a circular multi-layered diaphragm-type piezoelectric actuator
583
Investigation on parasexiphenyl deposits onto alignment layers useful in liquid crystal displays
584
Investigation on Parasites and some Causes of Mortality in Captive Punjab urial (Ovis vignei punjabiensis), Pakistan
585
Investigation on particle trajectories and lagrangian statistics at the outlet of a circular jet
586
Investigation on passive open boundary conditions adapted to the conjunction of strong currents, standing tidal wave and high stratification: Application to the French Guiana Continental Shelf
587
Investigation on passivity of titanium under steady-state conditions in acidic solutions
588
Investigation on PEGylation strategy of recombinant human interleukin-1 receptor antagonist Original Research Article
589
Investigation on percolation in conductance of mixed reverse micelles
590
Investigation on Performance Accuracy of Different Surrogates in Real Time Tumor Tracking at External Beam Radiotherapy
591
Investigation on performance improvement of a fully-actuated quadrotor
592
Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-generation system
593
Investigation on performance of zirconia and magnesia–zirconia stationary phases in hydrophilic interaction chromatography
594
Investigation on performances of non-loss storage for cryogenic liquefied gas Original Research Article
595
Investigation on periodic cracking of elastic film/substrate system by the extended finite element method
596
Investigation on phase relationships and creep properties of Ir–Nb–X (X = Hf, Ta, or Ti) ternary alloys
597
Investigation on phase transformation mechanism of zeolite NaY under alkaline hydrothermal conditions
598
Investigation on phenolic compounds stability during microwave-assisted extraction
599
Investigation on phospheonol pyruvate carboxylase and proline in damaged and indamaged needles of Picea Abies and Abies Alba
600
Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cement
601
Investigation on Photocatalytic Activity of Perovskite ZnTiO3 and CdTiO3 Nanocrystals for Degradation of Crystal Violet and Congo Red Pollutants under Sunlight
602
Investigation on photocatalytic degradation of ethyl violet dyestuff using visible light in the presence of ordinary rutile TiO2 catalyst doped with upconversion luminescence agent
603
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: I. Conformation in water and recognition mechanism as a chemosensor
604
Investigation on photophysical properties of a substituted 3H-indole-modified β-cyclodextrin: II. Efficient photoinduced energy transfer with naphthalene and its derivatives
605
Investigation on Physical and Mechanical Properties of Denim Woven Fabrics Made from Different Spandex Percentages
606
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst
607
investigation on physical properties of carbon nanotubes prepared by mechanothermal method
608
Investigation on physical properties of waste cooking oil – Rejuvenated bitumen binder
609
Investigation on Physicochemical Properties of Sugarcane Bagasse Fibre - Reinforced Polyester Composite
610
Investigation on Physiographic Condition of Wild Pistachio Habitats in Zagros Forests, Iran using GIS
611
Investigation on piezoelectric lead zirconate titanate detector bombarded obliquely with hypervelocity iron particles
612
Investigation on Plasmodium falciparum and Plasmodium vivax infection influencing host haematological factors in tribal dominant and malaria endemic population of Jharkhand
613
Investigation on polycrystalline CVD diamond-based alpha-particle detectors
614
Investigation on polymer–rubber aggregate modified porous concrete
615
Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites
616
Investigation on polysulfone blended NH-2MIL125 (Ti) membrane for photocatalytic degradation of Methylene Blue dye
617
Investigation on possibility of mechanochemical synthesis of CaTiO3 from different precursors
618
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
619
Investigation on possibility of neutron electric optical devices based on piezoelectric single crystals
620
Investigation on possible allergenicity of 19 different commercial enzymes used in the food industry
621
Investigation on Possible Contamination of Port Sediments by Means of ATRFTIR Spectroscopy and Thermal Analysis
622
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
623
Investigation on possible relationships between the content of sulfate and selected metals in Chianti wines
624
Investigation on potential applicability of subsurface cooling in Singapore
625
Investigation on powder metallurgy Cr–Si–Ta–Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance
626
Investigation on power output of the gamma-configuration low temperature differential Stirling engines
627
Investigation on pozzolanic effect of perlite powder in concrete
628
Investigation on Pr2 − xSrxNiO4 + δ (x = 0.3–1.0) cathode materials for intermediate temperature solid oxide fuel cell
629
Investigation on practical training participation intentions of technical and vocational college students through trust perceptions
630
Investigation on precipitation in Zircaloy-2 fuel cladding tube
631
Investigation on preformed shape design to improve formability in tube hydroforming process using FEM
632
Investigation on pre-oxidation of steels in light water reactor circuits Original Research Article
633
Investigation on preparation and physical properties of LPCVD SixOyNz thin films and nanocrystalline Si/SixOyNz superlattices for Si-based light emitting devices
634
Investigation on preparation and physical properties of nanocrystalline Si/SiO2 superlattices for Si-based light-emitting devices
635
Investigation on preparation and properties of Pb(Zr0.95Ti0.05)O3 thin films
636
Investigation on preparation of Al–4.5%Cu/SiCp nanocomposite powder via mechanical milling
637
Investigation on preparation of multiwalled carbon nanotubes by DC arc discharge under N2 atmosphere Original Research Article
638
Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods
639
Investigation on processing of industrial set-up plasma enhanced chemical vapor deposition with pulsed d.c. power
640
Investigation on propagation characteristics of the pressure wave in gas flow through pipes and its application in gas drilling
641
Investigation on properties and microstructures of spheroidal graphite Fe–C–2Si and Fe–C–2Al cast irons
642
Investigation on properties of a novel ceria–zirconia–praseodymia solid solution and its application in Pd-only three-way catalyst for gasoline engine emission control
643
Investigation on properties of re-dispersible cationic hydrogel nanoparticles
644
Investigation on properties of TiO2 thin films deposited at different oxygen pressures
645
Investigation on pseudosymmetry, twinning and disorder in crystal structure determinations: Ba(H2O)M2III[PO3(OH)]4 (M=Fe, V) as examples
646
Investigation on pulsed Nd:YAG laser welding of 49Ni–Fe soft magnetic alloy
647
Investigation on Pulverized Coal Combustion Behavior by Non-Isothermic Integral Thermogravimetry Method Original Research Article
648
Investigation on pumping oxygen characteristics of (Bi2O3)0.73(Y2O3)0.27 solid electrolyte
649
Investigation on purification of hydrochloric acid by membrane method
650
Investigation on pyrolysis behavior and decomposition compounds of three synthesized glycosidically bond flavor precursors
651
Investigation on pyrolysis characteristic of natural coke using thermogravimetric and Fourier-transform infrared method
652
Investigation on pyrolysis of Moroccan oil shale/plastic mixtures by thermogravimetric analysis
653
Investigation on QSAR and binding mode of a new class of human rhinovirus-14 inhibitors by CoMFA and docking experiments Original Research Article
654
Investigation on Raman spectra and thermal properties of LuVO4 and Nd:LuVO4 crystals
655
Investigation on rapid degradation of sodium dodecyl benzene sulfonate (SDBS) under microwave irradiation in the presence of modified activated carbon powder with ferreous sulfate Original Research Article
656
Investigation on RC rafters having different types of reinforcement
657
Investigation on RC rafters having different types of reinforcement
658
Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers
659
Investigation on reduction of cement binder in cold bonded pelletization of iron ore fines
660
Investigation on reduction of required superconductor volume in a resistive fault current limiter with Bi2223 bulk superconductor
661
Investigation on REE Transported by Airborne Dust and Deposited on Vegetation
662
Investigation on relationship between mechanical properties and microstructural characteristics of metal matrix composites fabricated by cold spraying technique
663
Investigation on Relationships among Deformation, Texture and Properties of TA16 Alloy Tube
664
Investigation on relaxation dynamics of photoexcitations and spectral narrowing of photoluminescence in PPV films
665
Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server
666
Investigation on reliability of nanolayer-grained Ti3SiC2 via Weibull statistics
667
Investigation on requirement of crude protein for maintenance in Shaoxing ducks
668
Investigation on resistance to attrition of coated particles by response surface methodology
669
Investigation on rheological behavior of 8 mol% yttria stabilized zirconia (8YSZ) powder using Tiron
670
Investigation on Risk Factors of Ventilator-Associated Pneumonia in Acute Cerebral Hemorrhage Patients in Intensive Care Unit
671
Investigation on ropiness development by isolates of the genera Lactobacillus, Alcaligenes and Feta cheese starter cultures Original Research Article
672
Investigation on Safety Knowledge, Attitude, and Performance (Safety-KAP) Among Firefighters of Operating Units in Tehran
673
Investigation on Sb-rich Sb–Se–Te phase-change material for phase change memory application
674
Investigation on scandium-doped manganate La0.8Sr0.2Mn1−xScxO3−δ cathode for intermediate temperaturesolid oxide fuel cells
675
Investigation on selective rhenium leaching from molybdenite roasting flue dusts
676
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
677
Investigation on semi-insulating GaAs detectors using laser-induced current pulses
678
Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor Original Research Article
679
Investigation on sensitized chemiluminescence systems and their mechanism for five fluoroquinolones Original Research Article
680
Investigation on sequential extraction of peanut allergens for subsequent analysis by ELISA and 2D gel electrophoresis
681
Investigation on Serum Levels of Interleukin-18 and Interleukin-6 in Patients With Dermatomyositis and Polymyositis
682
INVESTIGATION ON SEXUAL AND ASEXUAL PROPAGATION METHODS OF DAMASK ROSE (ROSA DAMASCENA MILL.)
683
Investigation on shape transferability in ultraprecision glass molding press for microgrooves
684
Investigation on shape variation of Au nanocrystals
685
Investigation on shot-coke-forming propensity and controlling of coke morphology during heavy oil coking
686
Investigation on simultaneous analysis of multicomponent polycyclic aromatic hydrocarbon mixtures in water samples: a simple synchronous fluorimetric method
687
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
688
Investigation on single-electron dynamics in coupled GaAs-AlGaAs quantum wires
689
Investigation on sintering mechanism of nanoscale tungsten powder based on atomistic simulation Original Research Article
690
Investigation on size dependent structural and magnetic behavior of nickel ferrite nanoparticles prepared by sol–gel and hydrothermal methods
691
Investigation on Slag-Refractory Interaction in Ladle Using Computational Techniques
692
Investigation on sliding wear performance of WC10Co2Ni cladding developed through microwave irradiation
693
Investigation on SnO2 nanopowders stored for different time and BaTiO3 modification
694
Investigation on soaking and formation of lead/acid battery plates with different mass structure
695
Investigation on socio –economic factors of rice straw burning in central and western county in Guilan Province.
696
Investigation on soil genesis and land suitability evaluation of Anarak region: a case study in Fars province
697
Investigation on solar desiccant dehumidification process for energy conservation of central air-conditioning systems
698
Investigation on solar hybrid desiccant cooling system for commercial premises with high latent cooling load in subtropical Hong Kong
699
Investigation on solar stills having floating plates
700
Investigation on sol–gel silica coatings for the protection of ancient glass: Interaction with glass surface and protection efficiency
701
Investigation on solid solubility and physical properties of Cu–Fe/CNT nano-composite prepared via mechanical alloying route
702
Investigation on Solubility of Hydrogen Sulfide in Molten Sulfur Using Iodometric Back Titration Method
703
Investigation on solvent-free solid polymer electrolytes for advanced lithium batteries and their performance
704
Investigation on some Ecological and Morphological Factor of Lagochilus macracanthus Fisch. & C. A. Mey in Yazd Province
705
Investigation on some main glycosides content of Stevia rebaudian B. under different concentrations of commercial and synthesized silver nanoparticles
706
Investigation on Some Morphological and Physiological Characteristics of Gerbera jamesonii as Affected by Humic Acid and Nano-Calcium Chelate in Hydroponic Culture Conditions
707
Investigation on some of the salient features of II–IV–V2 pnictides using band structure calculations as a tool
708
Investigation on some Schiff bases as HCl corrosion inhibitors for carbon steel
709
Investigation on sorption equilibria of Mn(II), Cu(II) and Cd(II) on a carboxylic resin by the Gibbs–Donnan model
710
INVESTIGATION ON SOUND ABSORPTION COEFFICIENT OF NATURAL PADDY FIBERS
711
Investigation on spacers and structures: A simple but effective approach toward high-performance hybrid white organic light emitting diodes
712
Investigation on spontaneous ignition of two kinds of organic material with water
713
Investigation on Stability and Galloping Characteristics of Iced Quad Bundle Conductor
714
Investigation on stability and preservation of arsenic species in iron rich water samples
715
Investigation on stability and rheological properties of nanofluid of ZnO nanoparticles dispersed in poly(ethylene glycol)
716
Investigation on stability of PZT/epoxy piezocomposite with pressure and temperature
717
Investigation on status and influential factors of cognitive function of the community-dwelling elderly in Changsha City
718
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
719
Investigation on steady state deformation and free vibration of a rotating inclined Euler beam
720
Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method
721
Investigation on strength, toughness and microstructure of an Al–Zn–Mg–Cu alloy pre-stretched thick plates in various ageing tempers
722
Investigation on strengthening of 6A02 aluminum alloy sheet in hot forming-quenching integrated process with warm forming-dies
723
Investigation on Stress Distribution of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes in Thermal Environment
724
Investigation on stress distribution of multilayered composite structure (MCS) using infrared thermographic technique
725
Investigation on stress evolution in boron nitride films
726
Investigation on stress-crack opening relationship of engineered cementitious composites using inverse approach
727
Investigation on structural and physicochemical modifications of standard maize, waxy maize, wheat and potato starches after DIC treatment
728
Investigation on structural and thermal expansion properties of Al2ErGe2
729
Investigation on structural features of Shengli lignite through oxidation under mild conditions
730
Investigation on structural fluctuation of supercritical cyclohexane by small-angle X-ray scattering
731
Investigation on structural, optical and dielectric properties of Co doped ZnO nanoparticles synthesized by gel-combustion route
732
Investigation on structural, optical, thermal, mechanical and dielectric properties of l-proline cadmium chloride monohydrate single crystals: An efficient NLO material
733
Investigation on structure and properties of low-temperature sintered composite ferrites
734
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
735
Investigation on structure and thermal behavior of 4,4′-dihydroxyazobenzene functionalized with epoxy groups
736
Investigation on structures and electrochemical performances of the as-cast and -quenched electrode alloys
737
Investigation on Structures and Properties of Yb3+-Doped Laser Glasses
738
Investigation on Subchronic Lead Intoxication on Blood Indices of Male Rats
739
Investigation on substituent effect in novel azo-naphthol dyes containing polymethacrylates for nonlinear optical studies Original Research Article
740
Investigation on substrates of MmNi5-based alloy electrodes for high power applications
741
Investigation on sulfation of modified Ca-based sorbent
742
Investigation on sulfuric acid sulfonation of in-situ sol–gel derived Nafion/SiO2 composite membrane
743
Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing
744
Investigation on synergism of composite additives for zinc corrosion inhibition in alkaline solution
745
Investigation on syngas production via biomass conversion through the integration of pyrolysis and air–steam gasification processes
746
Investigation on synthesis of spheres-on-sphere silica particles and their assessment for high performance liquid chromatography applications
747
Investigation on synthesis, characterisation and electrochemical properties of TiO2–Al2O3 nanocomposite thin film coated on 316 L stainless steel
748
Investigation on synthesis, structure and catalytic modification of Ca(AlH4)2 complex hydride
749
Investigation on tempering of granular bainite in an offshore platform steel
750
Investigation on the accuracy of harmonic pollution metering techniques
751
Investigation on the adsorption capability of egg shell membrane towards model textile dyes
752
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
753
Investigation on the Agent Precise Quantitative Control for Foam Technology with Cavitation Jet
754
Investigation on the amorphous–crystalline transition and microstructure of sol-gel derived (Ba1−xSrx)TiO3 thin films
755
Investigation on the amounts of Na2CO3 and sulphur to obtain pure Y2O2S and up-conversion luminescence of Y2O2S:Er
756
Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade
757
Investigation on the applicability of turbulent-Prandtl-number models for liquid lead-bismuth eutectic
758
Investigation on the application of DNA forensic human identification techniques to detect homologous blood transfusions in doping control
759
Investigation on the application of titania nanorod arrays to the determination of chemical oxygen demand Original Research Article
760
Investigation on the as-cast microstructure of Nb–Nb silicide based multicomponent alloys
761
Investigation on the association between breast cancer and consumption patterns of combined oral contraceptive pills in the women of Isfahan in 2011
762
Investigation on the Association of Cardiovascular Markers with Severity of Chronic Pyelonephritis
763
Investigation on the atomic oxygen erosion resistance of sol–gel alumina–silica composite films on Kapton
764
INVESTIGATION ON THE AWARENESS AND PERCEPTION, ATTITUDE, AND IMPLEMENTATION OF THE CONCEPT OF ISLAMIZATION OF KNOWLEDGE AMONG UNIVERSITY EDUCATORS
765
Investigation on the ballistic behavior of Al2O3/Al2024 laminated composites
766
Investigation on the ballistic impact behavior of various alloys against 7.62 mm armor piercing projectile
767
Investigation on the ballistic performance of a dual phase steel against 7.62 mm AP projectile
768
Investigation on the Band Gap of Centered Square Phononic Crystals
769
Investigation on the barrier height and inhomogeneity of nickel silicide Schottky
770
Investigation on the barrier height and phase transformation of nickel silicide Schottky contact
771
Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches
772
Investigation on the behavior of choline-derived cationic surfactant in aqueous solution in the absence and presence of PdCl2
773
Investigation on the Behavior of Tensile Damage Evolution in T700/6808 Composite Based on Acoustic Emission Technology
774
Investigation on the behaviour of a DI diesel engine fueled with Jatropha Methyl Ester (JME) and Tyre Pyrolysis Oil (TPO) blends
775
Investigation on the behaviour of a restoration plaster applied on heavy salt loaded masonry
776
Investigation on the behaviour of medium carbon and vanadium microalloyed steels by hot forging test
777
Investigation on the binding activities of citalopram with human and bovine serum albumins
778
Investigation on the Binding Mode of 3, 4-Dihydropyrano[c]Chromene Derivative with Double Strand DNA
779
Investigation on the Biocatalytic Oligomerization of Glycidol
780
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation—Part 1: Alginate
781
Investigation on the biomimetic influence of biopolymers on calcium phosphate precipitation-part 2: Chitosan
782
Investigation on the bond strength of Al-1100/St-12 roll bonded sheets, optimization and characterization
783
Investigation on the calcining condition and sintering temperature of perovskite-type La0.7Ca0.3CrO3 complex oxides by a combustion method
784
Investigation on the catalysis of COx-free hydrogen generation from ammonia
785
INVESTIGATION ON THE CAUSES OF VARIATION ORDERS IN THE CONSTRUCTION OF BUILDING PROJECT – A STUDY IN THE STATE OF SELANGOR, MALAYSIA
786
Investigation on the Chain-to-Chain and Chain-to-Open-Framework Transformations of Two One-Dimensional Aluminophosphate Chains
787
Investigation on the Changes in Color Parameters and Turbidity of Cornelian Cherry (cornus mass L) Produced by Microwave and Conventional Heating
788
Investigation on the characteristics and mechanisms of unusual heat transfer of supercritical pressure water in vertically-upward tubes
789
Investigation on the characteristics of the envelope FDTD based on the alternating direction implicit scheme
790
Investigation on the characteristics of the flow and heat transfer in bilaterally heated narrow annuli
791
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
792
Investigation on the charge collection properties of a 4H-SiC Schottky diode detector
793
Investigation on the charge transfer excitation spectrum for nano-sized Y2O3:Eu3+
794
Investigation on the chemiluminescence reaction of luminol–H2O2–S2−/R–SH system Original Research Article
795
Investigation on the chemoenzymatic synthesis of threo- and erythro-β-hydroxy-l-glutamic acid derivatives
796
Investigation on the Chronic Tension-Type Headache from the Persian Medicine Point of View
797
Investigation on the coagulation and deposition of combustion particles in an enclosed chamber with and without stirring
798
Investigation on the cold start characteristics of a hydrogen-enriched methanol engine
799
Investigation on the combination of space geodetic techniques
800
Investigation on the combustion characteristics of a diesel engine fueled with diesel–azides blends
801
Investigation on the combustion of heavy-oil fly-ashes
802
Investigation on the combustion possibility of dry sewage sludge as a pulverized fuel of thermal power plant
803
Investigation on the compressive properties of the three dimensional four-directional braided composites
804
Investigation on the Concentration of Chemical Contaminants in Swimming Pools in Shahroud, Iran
805
Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling
806
Investigation on the coordination modes: Syntheses, characterization and crystal structures of diorganotin (IV) dichloride with 4(5)-imidazoledithiocarboxylic acid
807
Investigation on the corrosion and hydrogen evolution for AZ91D magnesium alloy in single and anion-containing oxalate solutions
808
Investigation on the corrosion and oxidation resistance of Ni–Al2O3 nano-composite coatings prepared by sediment co-deposition
809
Investigation on the corrosion behavior of aluminum alloys 3A21 and 7A09 in chloride aqueous solution
810
Investigation on the corrosion behavior of Ti–6Al–4V implant alloy by electrochemical techniques
811
Investigation on the Corrosion of Coated Steel Plates with Impact Defect using Divided Steel Plates
812
Investigation on the Corrosion Resistance and Release of Gentamicin Drug from Titanium Implant Reinforced by Polyethylene Glycol / Polyvinyl Alcohol Based Polymer Composite Coating
813
Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage
814
Investigation on the corrosion resistance of carbon black–graphite-poly(vinylidene fluoride) composite bipolar plates for polymer electrolyte membrane fuel cells
815
Investigation on the coupling effect of thermochromism and microstructure on spectral properties of structured surfaces
816
Investigation on the coupling reactions of aryltriflates with aromatic amines: Selection of the metal catalyst
817
Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method
818
Investigation on the crystal growth and characterisation of an organometallic non linear optical crystal – Tetrathiourea mercury tetrathiocyanato manganate
819
Investigation on the crystallography of reverted structure and its effect on the properties of low carbon steel
820
Investigation on the crystallography of the transformation products of reverted austenite in intercritically reheated coarse grained heat affected zone
821
Investigation on the Cu–Cr–RE alloys by rapid solidification
822
Investigation on the Cu–Cr–RE alloys by rapid solidification
823
Investigation on the cyanide leaching optimization for the treatment of KCGM gold flotation concentrate—phase 1
824
Investigation on the Cytotoxicity and Apoptosis of Citrate Based Silver Nanoparticles, In Vitro
825
Investigation on the damage mechanism and prevention of heavy-haul railway rail
826
Investigation on the defect structure and light-induced scattering of LiNbO3:Fe:Mg:Zr crystals with various Li/Nb ratios
827
Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
828
Investigation on the deletion and duplication of PMP22 gene in patients with Charcot-Marie-Tooth using Real-time PCR in Chaharmahal and Bakhtiari and Isfahan Provinces
829
Investigation on the dependence of optical spectra of silver chiral nanostructures on shape, dimensions and incident light by discrete dipole approximation
830
Investigation on the development potential of rooftop PV system in Hong Kong and its environmental benefits
831
Investigation on the dielectric properties of (Ba, Sr)TiO3 thin films on hybrid electrodes
832
Investigation on the diffusion bonding of tungsten and EUROFER97
833
Investigation on the diffusivity of partly fluorinated hydrocarbons in polymers
834
Investigation on the dipole–dipole interactions between tetramethylurea and acetonitrile by two-dimensional asynchronous spectroscopy
835
Investigation on the direct laser metallic powder deposition process via temperature measurement
836
Investigation on the dispersion of carbon nanotubes in nitrile butadiene rubber: Role of polymer-to-filler grafting reaction
837
Investigation on the dispersion of three-dimensional non-magnetized plasma photonic crystals with faced-centered-cubic lattices
838
INVESTIGATION ON THE DYNAMIC PERFORMANCE OF THE TRIPOD-BALL SLIDING JOINT WITH CLEARANCE IN A CRANK–SLIDER MECHANISM. PART 1. THEORETICAL AND EXPERIMENTAL RESULTS
839
Investigation on the early and late stage phase-separation dynamics of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) blends through rheological and scattering functions
840
Investigation on the ecological suitable regionalization of Melicope ptelefolia
841
Investigation on the Effect of Addition of Nano Alumina, Nano Silica, Nano Titania, and MWCNTs on Flexural and Compressive Strengths of Cement Mortar
842
Investigation on the Effect of Age and Gender on Hypersensitivity Reactions due to Allergens Injection in Iraqi Population
843
Investigation on The effect of Airgap Distance for Ignition Coils using Finite Element Methods
844
Investigation on the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel
845
Investigation on the effect of benzotriazole on the phosphating of carbon steel
846
Investigation on the effect of carpet fiber inclusion on hydraulic conductivity of clean sand using laboratory and random finite element analyses
847
Investigation on the effect of cellulosic nanoparticles’ morphology on the properties of natural rubber based nanocomposites
848
Investigation on the effect of collagen and vitamins on biomimetic hydroxyapatite coating formation on titanium surfaces
849
Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine
850
Investigation on the Effect of Current Density on Porous GaN Fabricated by UV-assisted Electrochemical Etching
851
INVESTIGATION ON THE EFFECT OF DIFFERENT PARAMETERS IN WHEELED MOBILE ROBOT ERROR.
852
Investigation on the effect of different supercritical fluid extraction process on the activation of the R-134 catalyst
853
Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon
854
Investigation on the effect of flocculants on the filtration behavior in microfiltration of fine particles Original Research Article
855
Investigation on the effect of friction stir processing on the superplastic forming
856
Investigation on the effect of Germination on the Proximate Composition of African Yam Bean (Sphenostylis stenocarpa Hochst ex A Rich) and Fluted Pumpkin (Telferia occidentalis)
857
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology
858
Investigation on the Effect of Ketotifen Upon Morphine Tolerance and Dependence in Mice
859
Investigation on the Effect of Low Intensity Ultrasound Stimulation on Mouse Spermatogonial Stem Cell Proliferation and Colonization
860
Investigation on the effect of lubrication and forming parameters to the green compact generated from iron powder through warm forming route
861
Investigation on the Effect of Machining Parameters on The Surface Roughness and Recast Layer During Powder- Mixed EDM (PMEDM)
862
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes
863
Investigation on the effect of micro and nano fillers on electrical and thermal conductivity of glass epoxy hybrid composites
864
Investigation on the effect of RF air plasma and neem leaf extract treatment on the surface modification and antimicrobial activity of cotton fabric
865
Investigation on the effect of Tb(dbm)3phen on the luminescent properties of Eu(dbm)3phen-containing mesoporous silica nanoparticles
866
Investigation on the effect of the coherent flow structures in the dispersion of fine particles around a bluff body
867
Investigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
868
Investigation on the effect of trifluoromethyl group on the [3+2] cycloadditions of thiocarbonyl S-methanides with α, β-unsaturated ketones: A theoretical study using DFT
869
Investigation on the effect of Zr doping in ZnO thin films by spray pyrolysis
870
Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete
871
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
872
Investigation on the Effectiveness of Holistic Multi-dimensional Treatment Model (HMTM) in Improvement of CARS Test Indicators in Children suffering from Autism Spectrum Disorder
873
Investigation on the Effectiveness of the IC Susceptibility TEM Cell Method
874
Investigation on the effectiveness of various methods of information dissemination aiming at a change of occupant behaviour related to thermal comfort and exergy consumption
875
Investigation on the effects of a mechanical shear-stress modification method during cross-flow membrane emulsification
876
INVESTIGATION ON THE EFFECTS OF ANTIBACTERIAL FINISHES ON DYED COTTON KNITTED FABRICS
877
Investigation on the Effects of Bactenecin on POPC Membrane in Atomistic Details Using Molecular Dynamics Simulation
878
Investigation on the Effects of Different Incident Angle of Sarpol-e Zahab Earthquake Ground Motions on an Embankment Dam
879
Investigation on the effects of fiber composites at concrete joints
880
Investigation on the effects of fire retardants on the thermal decomposition of wood-derived rayon fiber in an inert atmosphere by thermogravimetry–mass spectrometry
881
Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers
882
INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
883
Investigation on the effects of measurement and temporal uncertainties on rolling element bearings prognostics
884
Investigation on the effects of microstructure on the impact and fracture toughness of a C–Mn steel with various microstructures
885
Investigation on the effects of native defects on electronic structure in MgB2 by first-principles calculation
886
Investigation on the effects of source directivity of Chinese speech intelligibility in real and virtual rooms
887
Investigation on the Effects of Uncertainties in Construction Quality on the Bursting Capacity of Submarine Pipelines
888
INVESTIGATION ON THE EFFECTS OF VARIOUS WASTE EXTRACTS ON FREE FORMALDEHYDE IN LEATHER
889
Investigation on the Efficacy of some Fungicides in Controlling Alternaria Late Blight of Pistachio
890
Investigation on the electric field profile in CdTe by ion beam induced current
891
Investigation on the electric field profile in CdTe by ion beam induced current
892
Investigation on the Electrical Conductivity of Aqueous Glycol based ZnO Nanofluids
893
Investigation on the electrical properties of metal–Cd0.9Zn0.1Te contacts
894
Investigation on the electrical properties of molten quaternary systems (Li, Na, K, Cs)Cl and (Li, Na, K, Cs)F by MD simulation
895
Investigation on the electrical response behaviors of multiwalled carbon nanotube/polyurethane composite in organic solvent vapors
896
Investigation on the electron transfer between anatase and rutile in nano-sized TiO2 by means of surface photovoltage technique and its effects on the photocatalytic activity
897
Investigation on the enhancement of ultraviolet emission in Ag-ZnO microrods
898
Investigation on the existence of optimum interlayer distance for H2 uptake using pillared-graphene oxide
899
Investigation on the existence of solutions for some nonlinear functional-integral equations Original Research Article
900
Investigation on the expression of IGF-I protein in insulin-resistant rat brain
901
Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis
902
Investigation on the failure of air compressor
903
Investigation on the failure of the gear shaft connected to extruder
904
Investigation on the feasibility and enhancement methods of wind power utilization in high-rise buildings of Hong Kong
905
Investigation on the feasibility of room temperature plastic deformation of pure magnesium by simple shear extrusion process
906
Investigation on the film-forming properties of lab fermenter scale produced scleroglucans from Sclerotium rolfsii ATCC 201126
907
Investigation on the fine structure of sea-breeze during ESCOMPTE experiment
908
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
909
Investigation on the fission track analysis of uranium-doped particles for the screening of safeguards environmental samples
910
Investigation on the Flexural Behavior of Corroded Concrete Beams Repaired by CFRP Sheet Under Different Corrosion Levels
911
Investigation on the flexural behavior of UHPCC considering the effect of fiber orientation distribution
912
Investigation on the flexural behaviour of high-performance reinforced concrete beams using sandstone aggregates
913
Investigation on the flexural behaviour of reinforced concrete beams using phyllite aggregates from mining waste
914
Investigation on the flow and thermal behavior of impinging jet ventilation systems in an office with different heat loads
915
Investigation on The Flow Characteristics of Rotating Nozzle Cavitation Water Jet Flow Field
916
Investigation on the fluorescence quenching of 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO) by certain estrogens and catechols
917
INVESTIGATION ON THE FLUX-BASED TORQUE-RIPPLE BEHAVIOR IN DTC BASED INDUCTION MOTOR DRIVES
918
Investigation on the foaming behaviors of NC-based gun propellants
919
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
920
Investigation on the formation and kinetics of glucose-fed aerobic granular sludge
921
Investigation on the formation and wear resistance of TiC coatings
922
Investigation on the formation of serrated grain boundaries with grain boundary characteristics in an AISI 316 stainless steel
923
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
924
Investigation on the formation of the preferred orientations in a TbDyFe alloy with directional solidification
925
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
926
Investigation on the formation of titanium nitride thin films on 304 type stainless steel using plasma focus device
927
Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings
928
Investigation on the fretting fatigue behaviors of steel wires under different strain ratios
929
Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system
930
Investigation on the fundamental niche of a rare species: an experiment on establishment of Luronium natans
931
Investigation on the Gas Jet Flow Performance Confined in Round Pipe
932
Investigation on the gas particle separation efficiency of the gas particle partitioner
933
Investigation on the gaseous and particulate emissions of a compression ignition engine fueled with diesel–dimethyl carbonate blends Original Research Article
934
Investigation on the gastrointestinal properties of ethanolic extract of Cannabis sativa through in vivo and in vitro approaches
935
Investigation on the generation process of HO2 radicals by γ-ray irradiation in O2-loaded fumed silica
936
Investigation on the Genotoxicity of Mercuric Chloride to Freshwater Clarias gariepinus
937
Investigation on the geochemical dynamics of a hydrate-bearing pockmark in the Niger Delta
938
Investigation on the geometric and matrix effects and quantitative determination of K, Cl and S atomic fraction for biomass burning particles by Monte Carlo simulation Original Research Article
939
Investigation on the geometrical aspect of deformation during equal-channel angular pressing by in-situ physical modeling experiments
940
Investigation on the growth of DAST crystals of large surface area for THz applications
941
Investigation on the growth performances of selected probiotic supplemented tilapia (Oreochromis niloticus) and walking catfish (Clarias batrachus) fingerlings
942
Investigation on the heavy-metal content of zinc-air button cells
943
Investigation on the Hermitian matrix expression‎ ‎subject to some consistent equations
944
Investigation on the high-temperature flow behavior of biomass and coal blended ash
945
Investigation on the hot deformation behavior of powder metallurgy TiAl-based alloy using 3D processing map
946
Investigation on the humification of municipal solid waste incineration residue and its effect on the leaching behavior of dioxins
947
Investigation on the hydration of CFBC fly ash
948
Investigation on the icosahedral quasicrystal phase in Mg70.8Zn28Nd1.2 alloy
949
Investigation on the IL-18 -607A/C and -137C/G on the susceptibility of ischemic stroke
950
Investigation on the Impact of an Energy Desubsidization Shock on the General Price Index Via a Nonlinear Inflation Model: Case of Iran
951
Investigation on the Impact of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC
952
Investigation on the impacts of different genders and ages on satisfaction with thermal environments in office buildings
953
Investigation on the impression creep properties of a cast Mg–6Al–1Zn magnesium alloy
954
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
955
Investigation on the improved radiation hardness of silicon detectors with high oxygen concentration
956
Investigation on the improvement of red phosphorescence in CaTiO3:Pr3+ nanoparticles
957
Investigation on the inclusion behavior of neutral red with β-cyclodextrin, hydroxypropyl-β-cyclodextrin and sulfobutylether-β-cyclodextrin Original Research Article
958
Investigation on the influence of cell shape anisotropy on the mechanical performance of closed cell aluminium foams using micro-computed tomography
959
Investigation on the influence of channel geometries on PEMFC performance
960
Investigation on the influence of heat-treatment parameters on the hardness of AA6061-SiCp composite
961
Investigation on the influence of machining parameters when machining tool steel using EDM
962
Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography
963
Investigation on the influence of plasma properties and SOL transport on the particle flux profiles on divertor plates in the Large Helical Device
964
Investigation on the influence of substitute groups in organic nanodevices
965
Investigation on the Influence of Synovial Fluid and Vitreous Humour on Avulsion Wounds Healing in Rabbits
966
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
967
Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system
968
Investigation on the influences of heat transfer enhancement measures in a thermally driven metal hydride heat pump
969
Investigation on the inhomogeneous structure of metallic glasses based on the initial elastic deformation in nanoindentation
970
Investigation on the inquilines (Hymenoptera: Cynipidae, Synergini) of oak galls from inner western Anatolia, Turkey
971
Investigation on the interaction behavior between bisphenol A and pepsin by spectral and docking studies
972
Investigation on the interaction between a heterocyclic aminal derivative, SBDC, and human serum albumin
973
Investigation on the interaction between C16TAB and NaCMC in semidilute aqueous solution based on rheological measurement
974
Investigation on the interaction effect of two parallel axial through-wall cracks existing in steam generator tube Original Research Article
975
Investigation on the interaction of tetrachloride fluorescein–bovine serum albumin-β-cyclodextrin and the determination of protein by flow injection analysis Original Research Article
976
Investigation on the interaction of the toxicant, gentian violet, with bovine hemoglobin
977
Investigation on the interactions between hydrophobic anions of ionic liquids and Triton X-114 micelles in aqueous solutions
978
Investigation on the interactions between pirarubicin and phospholipids Original Research Article
979
Investigation on the interactions between polyurethane and metal chloride
980
Investigation on the interactions of silymarin to bovine serum albumin and lysozyme by fluorescence and absorbance
981
Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600 °C
982
Investigation on the internal thermal link of pulse tube refrigerators Original Research Article
983
Investigation on the jet liquid impingement heat transfer for the central processing unit of personal computers
984
Investigation on the kinetic models for the regeneration of silica gel by hot air combined with power ultrasonic
985
Investigation on the knowledge associated with foodborne diseases in consumers of northeastern Portugal
986
Investigation on the linear and nonlinear optical properties of fluorenone-based linear conjugated oligomers: The influence of π-spacer
987
Investigation on the load-displacement curves of a human healthy heel pad: In vivo compression data compared to numerical results
988
Investigation on the locus of solubilization of polycyclic aromatic hydrocarbons in non-ionic surfactant micelles with 1H NMR spectroscopy
989
Investigation on the long-term radiation hardness of low and medium resistivity starting silicon materials for RT silicon detectors in high energy physics
990
Investigation on the low energy conformational surface of tabun to probe the role of its different conformers on biological activity
991
Investigation on the macromolecular network structure of Xianfeng lignite by a new two-step depolymerization
992
Investigation on the magnetomechanical behavior of trilayered GM actuator
993
Investigation on the magneto-optical Voigt effects in surface plasmon modes and anisotropic photonic band gap in the three-dimensional magnetized plasma photonic crystals as the mixed polarized modes considered
994
Investigation on the martensitic transformation and the associated intermediate phase in U–2 wt%Zr alloy
995
Investigation on the martensitic transformation in γ-Fe(n) nanoparticles
996
Investigation on the mechanical behavior of fivefold twinned silver nanowires
997
Investigation on the mechanical behaviors of copper nanowires under torsion
998
Investigation on the Mechanical Properties of Fiber Reinforced Recycled Concrete
999
Investigation on the mechanical strength of magnetic hollow silica prepared from Pickering emulsion route
1000
Investigation on the Mechanism of Blade Tip Recess Improving the Aerodynamic Performance of Transonic Axial Flow Compressor