ليست عنوان مقالات لاتين Wear and friction behavior of self-lubricating alumina–zirconia–fluoride composites fabricated by the PECS technique Web page change and persistence—A four-year longitudinal study

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Wear and friction behavior of self-lubricating alumina–zirconia–fluoride composites fabricated by the PECS technique

2

Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites

3

Wear and friction behavior of stir cast aluminium-base short steel fiber reinforced composites

4

Wear and friction behaviour of alumina/mullite composite by sol–gel infiltration technique

5

Wear and friction behaviour of soft particles filled random direction short GFRP composites

6

Wear and friction characteristics of CGRP composite under wet contact condition using two different test techniques

7

Wear and friction characteristics of electrodeposited graphite–bronze composite coatings

8

Wear and friction characteristics of ion-implanted zirconia ceramics

9

Wear and friction characteristics of PVD-coated roller bearings

10

Wear and friction mechanism of PTFE reservoirs embedded into thermal sprayed metallic coatings

11

Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing

12

Wear and friction of a new wear-resistant material: TiNi-based composites

13

Wear and friction of Al–Al2O3 composites at various sliding speeds

14

Wear and friction of synthetic esters in a boundary lubricated journal bearing

15

Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures Original Research Article

16

Wear and friction of transformation-toughened CMC and MMC

17

Wear and frictional behaviour of high strength steel in stamping monitored by acoustic emission technique

18

Wear and frictional mechanisms of copper-based bearing alloys

19

Wear and frictional performance of polymeric composites aged in various solutions

20

Wear and hardness of carbon overcoats on magnetic recording sliders

21

Wear and immersion corrosion of Ni–P electrodeposit in NaCl solution

22

Wear and mechanical properties of carbon fiber reinforced copper alloy composites

23

Wear and mechanical properties of sintered copper–tin composites containing graphite or molybdenum disulfide

24

Wear and mechanical properties of epoxy/SiO2-TiO2 composites

25

Wear and micropitting of steel ball sliding against TiN coated steel plate in dry and lubricated conditions

26

Wear and morphology of infiltrated white spot lesions

27

Wear and morphology of infiltrated white spot lesions

28

Wear and oxidation behaviour of high-chromium white cast irons

29

Wear and oxidation behaviour of shrouded plasma sprayed fly ash coatings

30

Wear and oxidation resistance of Al2O3 particle dispersed Al3Ti composite with a nanostructure prepared by pulsed electric current sintering of mechanically alloyed powders

31

Wear and oxidation resistance of combustion CVD grown alumina films

32

Wear and rolling contact fatigue of PEEK and PEEK composites

33

Wear and scratch resistance characteristics of electrodeposited nickel-nano and micro SiC composites

34

Wear and scuffing characteristics of composite polymer and nickel/ceramic composite coated piston skirts against aluminum and cast iron cylinder bores

35

Wear and surface roughness of current veneered materials after toothbrush/dentifrice abrasion

36

Wear and thermal behaviour of CVD α-Al2O3 and MTCVD Ti(C,N) coatings during machining

37

Wear and wear particles—some fundamentals

38

Wear as a product failure mechanism – Overview and case studies

39

Wear assessment employing remote condition monitoring: a case study

40

Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing

41

Wear assessment of plasma nitrided AISI H11 steel

42

Wear assessments of prehistoric instruments

43

Wear associated with growth defects in combined cathodic arc/unbalanced magnetron sputtered CrN/NbN superlattice coatings during erosion in alkaline slurry

44

Wear at the die radius in sheet metal stamping

45

Wear at the titanium–titanium and the titanium–zirconia implant–abutment interface: A comparative in vitro study

46

Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys

47

Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling

48

Wear behavior and mechanical performance of metal injection molded Fe–2Ni sintered components

49

Wear Behavior and Mechanism of Spheroidal Graphite Cast Iron Original Research Article

50

Wear behavior and self tribofilm formation of hot-pressed Al2O3/TiC/CaF2 ceramic composites sliding against cemented carbide

51

Wear behavior and wear debris distribution of UHMWPE against Si3N4 ball in bi-directional sliding

52

Wear behavior in Al2024–CNTs composites synthesized by mechanical alloying

53

Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering

54

Wear behavior in SiC–TiX multilayered nanocomposite coatings

55

Wear behavior in turning high hardness alloy steel by CBN tool

56

Wear behavior of a crankshaft journal bearing manufactured by powder spraying

57

Wear behavior of a series of Zr-based bulk metallic glasses

58

Wear behavior of AA1060 reinforced with alumina under different loads

59

Wear behavior of adaptive nano-multilayered AlTiN/MexN PVD coatings during machining of aerospace alloys

60

Wear behavior of adaptive nano-multilayered TiAlCrN/NbN coatings under dry high performance machining conditions

61

Wear behavior of Al–12Si/TiB2 coatings produced by laser cladding

62

Wear behavior of Al2O3/Ti(C,N)/SiC new ceramic tool material when machining tool steel and cast iron

63

Wear behavior of Al90Mn8Ce2 alloy prepared by powder metallurgy

64

Wear Behavior of Al-Al3V and Al-(Al3V-Al2O3) Nanostructured Composites Fabricated by Mechanical Alloying and Hot Extrusion

65

Wear behavior of Al–Cu and Al–Cu/SiC components produced by powder metallurgy

66

Wear behavior of Al–Fe–Cr–Ti alloys fabricated by magnetic pulsed compaction

67

Wear behavior of alloyed hypereutectic gray cast iron

68

Wear behavior of Al–Mg–Cu–based composites containing SiC particles

69

Wear behavior of Al–Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering

70

Wear behavior of alumina–titania coatings: analysis of process and parameters

71

Wear Behavior of Aluminium Metal Matrix Composite Prepared from Industrial Waste

72

Wear behavior of aluminum matrix hybrid nanocomposites fabricated by powder metallurgy

73

Wear behavior of artificially aged AA2024/40 μm SiCp composites in comparison with conventionally wear resistant ferrous materials

74

Wear behavior of austempered ductile irons with dual matrix structures

75

Wear behavior of austenite steel matrix composite reinforced by in situ granular eutectics in impact abrasion

76

Wear behavior of B4C–Mo co-sputtered wear coatings

77

Wear behavior of boron-doped Ni3Al material at elevated temperature

78

Wear behavior of brazed WC/NiCrBSi(Co) composite coatings

79

Wear behavior of bulk oriented and fiber reinforced UHMWPE

80

Wear behavior of carbon steel electrodeposited by nanocrystalline Ni–W coating

81

Wear behavior of CBN tools while turning various hardened steels

82

Wear behavior of ceramic nozzles in coal water slurry burning

83

Wear behavior of ceramic nozzles in sand blasting treatments

84

Wear behavior of ceramic powder cladding on an S50C steel surface

85

Wear behavior of chilled (metallic and non-metallic) aluminum alloy–glass particulate composite

86

Wear behavior of coated tools in laser assisted micro-milling of hardened steel

87

Wear behavior of Cu–Ag–Cr alloy wire under electrical sliding

88

Wear behavior of Cu–Ag–Cr alloy wire under electrical sliding

89

Wear behavior of Cu–La2O3 composite with or without electrical current

90

Wear Behavior of CVD-Diamond Tools

91

Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures

92

Wear behavior of early carious enamel before and after remineralization

93

Wear behavior of electroless Ni–P–B4C composite coatings

94

Wear behavior of epoxy matrix composites filled with uniform sized sub-micron spherical silica particles

95

Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication

96

Wear behavior of flame-sprayed Al2O3–TiO2 coatings on plain carbon steel substrates

97

Wear behavior of gas tungsten arc deposited FeCr, FeCrC, and WC coatings on AISI 1018 steel

98

Wear behavior of gas tungsten arc deposited FeCrC, FeCrSi, and WCo coatings on AISI 1018 steel

99

Wear behavior of gas tunnel type plasma sprayed Zr-based metallic glass composite coatings

100

Wear behavior of HFCVD-diamond coated carbide and ceramic tools

101

Wear behavior of HVOF-sprayed Fe-based amorphous coatings

102

wear behavior of laser cladded ni based-wc-la2o3 hybrid composite coating on h13-steel at elevated and ambient temperatures

103

Wear behavior of light-cured dental composites filled with porous glass–ceramic particles

104

Wear behavior of light-cured resin composites with bimodal silica nanostructures as fillers

105

Wear behavior of low-cost, lightweight TiC/Ti–6Al–4V composite under fretting: Effectiveness of solid-film lubricant counterparts

106

Wear behavior of materials in magnetically assisted abrasive flow machining

107

Wear behavior of nano structured Al (Zn)/Al2O3 and Al (Zn)–4Cu/Al2O3 composite materials synthesized by mechanical and thermal process

108

Wear behavior of nanometric CrN/Cr multilayers

109

Wear behavior of nitrocarburized JIS SKD61 tool steel

110

Wear behavior of nitrogen implanted PVD-coated hard metal cutting inserts

111

Wear behavior of PAEK, poly(aryl-ether-ketone), under physiological conditions, outlooks for performing these materials in the field of hip prosthesis

112

Wear behavior of plasma and HVOF sprayed WC-12Co + 6% ETFE coatings on AA2024-T6 aluminum alloy

113

Wear behavior of plasma electrolytic oxidation (PEO) and hybrid coatings of PEO and laser on MRI 230D magnesium alloy

114

Wear behavior of plasma sprayed composite coatings with in situ formed Al2O3

115

Wear behavior of self-propagating high-temperature synthesized Cu-TiO2 nanocomposites

116

Wear behavior of SiC nanowire-reinforced SiC coating for C/C composites at elevated temperatures

117

Wear behavior of sintered hexagonal boron nitride under atmosphere and water vapor ambiences

118

Wear behavior of some cutting tool materials in hard turning of HSS

119

Wear behavior of the abrasive grains used in optical glass polishing

120

Wear Behavior of the Multiheterostructured AZ91 Mg Alloy Prepared by ECAP and Aging

121

Wear behavior of the surface of Ti–6Al–4V alloy modified by treating with a pulsed d.c. plasma-duplex process

122

Wear behavior of thixoformed AZ91D magnesium alloy: A comparison with permanent mould cast alloy

123

Wear behavior of TiB2 inoculated 20Cr–3Mo–4C high chromium white cast irons

124

Wear behavior of TiN coated AISI H11 and AISI M7 twist drills prior to plasma nitriding

125

Wear Behavior of Titanium Alloy Lubricated with Palm Olein as Bio-Lubricant Using Pin-On-Disk Tester

126

Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials

127

Wear behavior of WCP/Fe–C composites under high-speed dry sliding

128

Wear behavior on advanced structural ceramics: α-sialon matrix reinforced with β-sialon fibers

129

Wear behaviors and wear mechanisms of several alloys under simulated deep-sea environment covering seawater hydrostatic pressure

130

Wear behaviors of ceramic nozzles with laminated structure at their entry

131

Wear behaviors of Cf/Mg composites fabricated by extrusion directly following vacuum pressure infiltration technique

132

Wear Behaviour and Tool Life of Wire-EDM-ed and Ground Carbide Punches

133

Wear behaviour in a combined micro blanking and deep drawing process

134

Wear behaviour of 7039 aluminum alloy

135

Wear behaviour of a Mg alloy subjected to friction stir processing

136

Wear behaviour of a REFEL SiC containing fluorides up to 900°C

137

Wear behaviour of AE42+20% saffil Mg-MMC

138

Wear behaviour of Al/(Al2O3p+SiCp) hybrid composites

139

Wear behaviour of Al2O3 dispersion strengthened MCrAlY coating

140

Wear behaviour of Al–Mo–Ni composite coating at elevated temperature

141

Wear behaviour of alumina based ceramic cutting tools on machining steels

142

Wear behaviour of aluminium alloy and its composites reinforced by SiC particles using statistical analysis

143

Wear behaviour of AZ91D alloy at low sliding speeds

144

Wear behaviour of AZ91D magnesium alloy with a nanocrystalline surface layer

145

Wear behaviour of bulldozer rollers welded using a submerged arc welding process

146

Wear behaviour of cast and mushy state rolled Al–4.5Cu alloy and in-situ Al4.5Cu–5TiB2 composite

147

Wear behaviour of cast hypereutectic aluminium silicon alloys

148

Wear behaviour of cemented carbide tools in dry machining of aluminium alloy

149

Wear behaviour of CrN coatings MEVVA ion implanted with Zr

150

Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions

151

Wear behaviour of dental enamel at the nanoscale with a sharp and blunt indenter tip

152

Wear behaviour of electroless Ni–P coatings and optimization of process parameters using Taguchi method

153

Wear behaviour of eutectic and hypereutectic Al–Si–Cu–Mg casting alloys tested against a composite brake pad

154

Wear behaviour of eutectic and hypereutectic Al–Si–Cu–Mg casting alloys tested against a composite brake pad

155

Wear behaviour of forging steels with different microstructure during dry sliding

156

Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature

157

Wear behaviour of hardfacing deposits on cast iron

158

Wear behaviour of high velocity suspension flame sprayed (HVSFS) Al2O3 coatings produced using micron- and nano-sized powder suspensions

159

Wear behaviour of human teeth in dry and artificial saliva conditions

160

Wear behaviour of hypereutectic Al–Si–Cu–Mg casting alloys with variable Mg contents

161

Wear behaviour of interpenetrating alumina–copper composites

162

Wear behaviour of iron boride coatings produced by VPS technique on carbon steels

163

Wear behaviour of laser clad NiCrBSi coating

164

Wear behaviour of martensitic NiTi shape memory alloy under ball-on-disk sliding tests

165

Wear behaviour of martensitic stainless steel after PIII surface treatment

166

Wear behaviour of mould inserts used in micro powder injection moulding of ceramics and metals

167

Wear behaviour of nanocrystallised Hadfield steel

168

Wear behaviour of nanostructured alumina–titania coatings deposited by atmospheric plasma spray

169

Wear behaviour of near eutectic Al–Si alloy reinforced with in-situ TiB2 particles

170

Wear behaviour of NiTi shape memory alloy after oxygen-PIII treatment

171

Wear behaviour of organic asbestos based and bronze based powder metal brake linings

172

Wear behaviour of plasma nitrided steels at ambient and elevated temperatures

173

Wear behaviour of plasma-sprayed AlSi/B4C composite coatings

174

Wear behaviour of SiC reinforced 2124 Al alloy composite in RWAT system

175

Wear behaviour of SiCp-reinforced magnesium matrix composites

176

Wear behaviour of single phase and composite sialon ceramics stabilized with Y2O3 and Lu2O3

177

Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions

178

Wear behaviour of tetrahedral amorphous diamond-like carbon (ta-C DLC) in additive containing lubricants

179

Wear behaviour of thermal flame sprayed FeCr coatings on plain carbon steel substrate

180

Wear behaviour of thermal spray Al/SiCp coatings

181

Wear behaviour of tool steels with added (WTi)C particles

182

Wear behaviour of uncoated and diamond coated Si3N4 tools under severe turning conditions

183

Wear behaviour of zinc-based alloys as influenced by alloy composition, nature of the slurry and traversal distance

184

Wear behaviour of α- and α/β-SiAlON ceramics stabilized with Nd2O3 and Y2O3

185

Wear behaviour of α-Si3N4 ceramics reinforced by rod-like β-Si3N4 grains

186

Wear behaviour on the radius portion of a die in deep-drawing: Identification, localisation and evolution of the surface damage

187

Wear behaviour, fluorescence and SEM investigations on nanocomposite zirconia-toughened alumina

188

Wear behaviours of Pb added Mg–Al–Si composites reinforced with in situ Mg2Si particles

189

Wear characterisation and degradation mechanisms of a concrete surface under ice friction

190

Wear characterisation and tool performance of sintered carbide inserts during automatic machining of AISI 1045 steel

191

Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy

192

Wear characterisation of small PM rotors and oil pump bearings

193

Wear characteristic and biocompatibility of some polymer composite acetabular cups

194

Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes

195

Wear characteristic of in situ synthetic TiB2 particulate-reinforced Al matrix composite formed by laser cladding

196

Wear Characteristic of Several Commercial Wrought Aluminium Alloys Against Tool Steel

197

Wear Characteristic of Stellite 6 Alloy Hardfacing Layer by Plasma Arc Surfacing Processes

198

Wear Characteristic of Surface Hardened Ausferritic Si-Steel Original Research Article

199

Wear characteristics and mechanisms of a thin edge cutting blade

200

Wear characteristics and performance of multi-layer CVD-coated alloyed carbide tool in dry end milling of titanium alloy

201

Wear characteristics and performance of spinning rings

202

Wear characteristics and performance of spinning rings

203

Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder

204

Wear characteristics of Al–Cr–O surface nano-composite layer fabricated on Al6061 plate by friction stir processing

205

Wear characteristics of austempered chilled ductile iron

206

Wear characteristics of carbon-phenolic woven composites mixed with nano-particles

207

Wear characteristics of ceramic-on-ceramic for hip endoprostheses

208

Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks

209

Wear characteristics of Cr3C2–NiCr and WC–Co coatings deposited by LPG fueled HVOF

210

Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness

211

Wear characteristics of diamond-coated atomic force microscope probe

212

Wear characteristics of diamond-coated atomic force microscope probe

213

Wear characteristics of electrolytic hard chrome and thermal sprayed WC–10 Co–4 Cr coatings sliding against Al–Ni–bronze in air at 21 °C and at −40 °C

214

Wear characteristics of HSLA steel

215

Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates

216

Wear characteristics of laser sintered molding tools

217

Wear characteristics of nano TiAlN-coated carbide tools in ultra-high speed machining of AerMet100

218

Wear characteristics of PCBN tools in the ultra-precision machining of stainless steel at low speeds

219

Wear characteristics of phosphor–bronze/silicon carbide particulate composites

220

Wear characteristics of second-phase-reinforced sol–gel corundum abrasives Original Research Article

221

Wear characteristics of severely deformed aluminum sheets by accumulative roll bonding (ARB) process

222

Wear characteristics of sliding pairs of zirconia (Y-TZP) for hip endoprostheses

223

Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing

224

Wear characteristics of thermoset composite under high stress three-body abrasive

225

Wear characteristics of Ti–Nb–Ta–Zr and Ti–6Al–4V alloys for biomedical applications

226

Wear characteristics of titanium alloy Ti54 for cryogenic sliding applications

227

Wear Characteristics of Ultrahigh Molecular Weight Polyethylene (UHMWPE)

228

WEAR CHARACTERISTICS OF WOOD CUTTING TOOLS CAUSED BY EXTRACTIVE AND ABRASIVE MATERIALS IN SOME TROPICAL WOODS

229

Wear characterization of electrodeposited Ni–WC composite coatings

230

Wear characterization of functionally graded Al–SiC composite coatings produced by Friction Surfacing

231

Wear characterization of thermal spray welded Ni–Cr–B–Si–RE alloy coatings

232

Wear characterization of Ti–6Al–4V under fretting–reciprocating sliding conditions

233

Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite

234

Wear coefficient equation for aluminium-based matrix composites against steel disc

235

Wear coefficient of tungsten carbide against hot-work tool steel disc with two different pin settings

236

Wear comparison between a dual mobility total hip prosthesis and a typical modular design using a hip joint simulator

237

Wear corrosion properties of nano-structured SiC–nickel composite coatings obtained by electroplating

238

Wear data analysis of friction materials to investigate the simultaneous influence of operating parameters and compositions

239

Wear development of cemented carbide inserts coated with mono and multilayer PVD films, considering their strength properties, adhesion and the cutting loads

240

Wear development on cemented carbide inserts, coated with variable film thickness in the cutting wedge region

241

Wear development on wiper Al2O3–TiC mixed ceramic tools in hard machining of high strength steel

242

Wear durability studies of ultra-thin perfluoropolyether lubricant on magnetic hard disks

243

Wear durability study on self-lubricating SU-8 composites with perfluoropolyther, multiply-alkylated cyclopentane and base oil as the fillers

244

Wear elements generated in the elementary process of wear

245

Wear equation for adhesive wear established through elementary process of wear

246

Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains

247

Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains

248

Wear Evaluation on Ni3Al/MnS Composite Related to Metallurgical Processes Original Research Article

249

Wear evolution in a stranded rope under cyclic bending: Implications to fatigue life estimation

250

Wear Experiments of Fluorophlogopite Glass Ceramics against Cemented Carbide Materials

251

Wear Experiments of Glass Ceramics and Bearing Steel

252

Wear experiments with selected engineering polymers and polymer composites under dry reciprocating sliding conditions

253

Wear failure of truck diesel engine tappets

254

Wear identification in rotor-bearing systems by measurements of dynamic bearing characteristics

255

Wear improvement of sol–gel silica coatings on A380/SiCp aluminium composite substrate by diode laser sintering

256

Wear in high-speed impact mills

257

Wear in metal/silicon nitride sliding pairs

258

Wear in relation to friction — a review

259

Wear kinetics of Ti–6Al–4V under constant and variable fretting sliding conditions

260

Wear kinetics theory and its potential application to assessment of wear of machine parts

261

Wear life and adhesion of solid lubricant films on laser-textured steel surfaces

262

Wear life evaluation of diamond-like carbon films deposited by microwave plasma-enhanced CVD and RF plasma-enhanced CVD method

263

Wear life mechanism of journal bearings with bonded MoS2 film lubricants in air and vacuum

264

Wear map for grey cast iron

265

Wear mapping of CoCrMo alloy in simulated bio-tribocorrosion conditions of a hip prosthesis bearing in calf serum solution

266

Wear maps for titanium nitride coatings deposited on copper and brass with electroless nickel interlayers

267

Wear measurement of the cylinder liner of a single cylinder diesel engine using a replication method

268

Wear measurement using radionuclide-technique (RNT)

269

Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718

270

Wear mechanism in automotive brake materials, wear debris and its potential environmental impact

271

Wear mechanism map of uncoated HSS tools during drilling die-cast magnesium alloy

272

Wear mechanism maps for the belt finishing of steel and cast iron

273

Wear mechanism maps of uncoated HSS tools drilling die-cast aluminum alloy

274

Wear mechanism of abrasion resistant wear parts in raw material vertical roller mills

275

Wear mechanism of Al–Si alloy impregnated graphite composite under dry sliding

276

Wear mechanism of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam

277

Wear mechanism of CBN cutting tool during high-speed machining of mold steel

278

Wear mechanism of CBN cutting tool during high-speed machining of mold steel

279

Wear mechanism of clutch separating ring in a heavy load vehicle

280

Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process

281

Wear mechanism of ion-sulphurization layer on steel under dry conditions

282

Wear mechanism of iron-base diamond-impregnated tool composites

283

Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining

284

Wear mechanism of multiphase friction materials with different phenolic resin matrices

285

Wear mechanism of Ni–P–BN(h) composite autocatalytic coatings

286

Wear mechanism of PA6 roller used in cold rolling process

287

Wear mechanism of stainless steel confirmed by applications of phase-transformation of itself and CCD camera

288

Wear mechanism of TiN coated carbide and uncoated cermets tools at high cutting speed applications

289

Wear Mechanism of TiN, TiAIN and TiCN Coated Drills During Drilling of Carbon Steel

290

Wear mechanism of tungsten carbide dies during wet drawing of steel tyre cords

291

Wear mechanism operating in W-DLC coatings in contact with machined steel surfaces

292

Wear mechanism study of exhaust valve system in modern heavy duty combustion engines

293

Wear Mechanism when Machining Compacted Graphite Iron

294

Wear mechanisms and in-service surface modifications of a Stellite 6B Co–Cr alloy

295

Wear mechanisms and microstructure of pulsed plasma nitrided AISI H13 tool steel

296

Wear mechanisms and residual stresses in alumina-based laminated cutting tools

297

Wear mechanisms and scale effects in two-body abrasion

298

Wear mechanisms and tool life management of WC–Co drills during dry high speed drilling of woven carbon fibre composites

299

Wear mechanisms associated with the lubrication of zirconia ceramics in various aqueous solutions

300

Wear mechanisms experienced by a work roll grade high speed steel under different environmental conditions

301

Wear mechanisms in ball-cratering tests with large abrasive particles

302

Wear mechanisms in dense phase pneumatic conveying of alumina

303

Wear mechanisms in high speed steel reinforced with (NbC)p and (TaC)p MMCs

304

Wear mechanisms in materials with granitic textures—Applicability of a lateral crack system model

305

Wear mechanisms in polymer matrix composites abraded by bulk solids

306

Wear mechanisms of Al2O3/TiC/Mo/Ni ceramic wire-drawing dies

307

Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels

308

Wear mechanisms of cutting tools in high-speed cutting processes

309

Wear mechanisms of diamond abrasives during transition and steady stages in creep-feed grinding of structural ceramics

310

Wear mechanisms of diamond-coated tools

311

Wear mechanisms of epoxy-based composite coatings submitted to cavitation

312

Wear mechanisms of laser-hardened martensitic high-nitrogen-steels under sliding wear

313

Wear mechanisms of micro-drills during dry high speed drilling of PCB

314

Wear mechanisms of monolithic and multicomponent nitride coatings grown by combined arc etching and unbalanced magnetron sputtering

315

Wear Mechanisms of New Tool Materials for Ti-6AI-4V High Performance Machining

316

Wear mechanisms of PcBN cutting tools when dry turning ASTM Grade 2 austempered ductile iron under finishing conditions

317

Wear mechanisms of PVD-coated PCBN cutting tools

318

Wear mechanisms of several cutting tool materials in hard turning of high carbon–chromium tool steel

319

Wear mechanisms of steel roller bearings protected by thin, hard and low friction coatings

320

Wear mechanisms of the C/SiC brake materials

321

Wear mechanisms of TiN–TiB2 ceramic in sliding against alumina from room temperature to 700 °C

322

Wear mechanisms of titanium and aluminium nitride coatings: A microtribological approach

323

Wear mechanisms of ultra-hard cutting tools materials

324

Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718

325

Wear mechanisms of WC inserts in face milling of gamma titanium aluminides

326

Wear mechanisms of WC–Co cutting tools from high-speed tribological tests

327

Wear mode control of drive tip of ultrasonic motor for precision positioning

328

Wear monitoring based on the analysis of lubricant contamination by optical ferroanalyzer

329

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

330

Wear monitoring of bearing steel using electrostatic and acoustic emission techniques

331

Wear monitoring of protective nitride coatings using image processing

332

Wear observations applied to lifeboat slipway launches

333

Wear of a thin surface coating: modelling and experimental investigations

334

Wear of advanced cemented carbides for metalforming tool materials

335

Wear of advanced ceramics

336

Wear of Al/Al3Zr functionally graded materials fabricated by centrifugal solid-particle method

337

Wear of aligned silicon nitride under dry sliding conditions

338

Wear of Al–Mg–Cu composite reinforced by in situ formation of ceramics

339

Wear of aluminium-base materials processed by mechanical milling in air or ammonia

340

Wear of an aluminium alloy coated by plasma electrolytic oxidation

341

Wear of artificial hip joint material

342

Wear of carbon fiber reinforced carbon matrix composites: Study of abrasive, oxidative wear and influence of humidity Original Research Article

343

Wear of carbon nitride coatings under oscillating sliding conditions

344

Wear of cardiac lead outer insulation due to internal cable motion

345

Wear of cast chromium steels with TiC reinforcement

346

Wear of cast metal–metal pairs for total replacement hip prostheses

347

Wear of cathode in abrasive electrochemical grinding of hardly machined materials

348

Wear of ceramic and antagonist—A systematic evaluation of influencing factors in vitro

349

Wear of ceramic interfaces: Multiscale statistical simulation

350

Wear of ceramic nozzles by dry sand blasting

351

Wear of ceramics due to thermal stress: a thermal severity parameter

352

Wear of coal logs in pipe

353

Wear of coated and uncoated carbides in turning tool steel

354

Wear of cobalt-based alloys sliding in molten zinc

355

Wear of CoCrMo alloys used in metal-on-metal hip joints: A tribocorrosion appraisal

356

Wear of composite resin veneering materials and enamel in a chewing simulator

357

Wear of conventional pearlitic and improved bainitic rail steels

358

Wear of CrC-coated carbide tools in dry machining

359

Wear of Cu–15Ni–8Sn spinodal alloy

360

Wear of die materials in full scale plastic injection moulding of glass fibre reinforced polycarbonate

361

Wear of different aluminum matrix composites under conditions that generate a mechanically mixed layer

362

Wear of diffusion hardened Ti–6Al–4V sliding against tool steel

363

Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing

364

Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing

365

Wear of HIPed and non-HIPed alumina–alumina hip joints under standard and severe simulator testing conditions

366

Wear of hydrogen free C/Cr PVD coating against Al2O3 at room temperature

367

Wear of hydrotransport lines in Athabasca oil sands

368

Wear of Inconel 718 die during aluminium extrusion—a case study

369

Wear of iron–aluminide intermetallic-based alloys and composites by hard particles

370

Wear of magnesium composites reinforced with nano-sized alumina particulates

371

Wear of materials used for artificial joints in total hip replacements

372

Wear of Materials, Proceedings of the Twelfth International Conference on Wear of Materials, Atlanta, Georgia, April 25–29, 1999. Parts I and II

373

Wear of multiphase SiC based ceramic composites containing free carbon

374

Wear of nano-structured carbide-free bainitic steels under dry rolling–sliding conditions

375

Wear of nanostructured composite tool coatings

376

Wear of Ni3Al-based materials and its chromium-carbide reinforced composites

377

Wear of PEEK composites related to their mechanical performances

378

Wear of plasma-nitrided aluminum alloys

379

Wear of plasma-sprayed nanostructured zirconia coatings against stainless steel under distilled-water conditions

380

Wear of polymer horseshoes: a field investigation

381

Wear of PVD-coated solid carbide end mills in dry high-speed cutting

382

Wear of refractory ceramics against nickel

383

Wear of resin denture teeth by two-body contact

384

Wear of Rice in an Abrasive Milling Operation, Part 1: Prediction of Degree of Milling

385

Wear of Rice in an Abrasive Milling Operation, Part II: Prediction of Bulk Temperature Rise

386

Wear of rolling bearings due to debris particles

387

Wear of rolling bearings due to debris particles

388

WEAR OF ROTARY INSTRUMENTS: A PILOT STUDY

389

Wear of silicon nitride ceramics under fretting conditions

390

Wear of silicon nitride ceramics under fretting conditions

391

Wear of silicon surfaces in MEMS

392

Wear of single crystal silicon as a function of surface roughness

393

Wear of sintered HSS under combined squeeze–sliding lubrication

394

Wear of soft tool materials in sliding contact with zinc-coated steel sheet

395

Wear of spheroidal graphite cast irons for tractor drive train components

396

Wear of spray deposited Al–6Cu–Mn alloy under dry sliding conditions

397

Wear of stone used to manufacture axes in the Neolithic settlement at Makriyalos in Northern Greece

398

Wear of surface treated dies for aluminium extrusion — a case study

399

WEAR OF SURFACES: FROM MODELING OF MICROFRACTURE TO THE ANALYSIS OF THE SURFACE SHAPE VARIATION

400

WEAR OF SURFACES: FROM MODELING OF MICROFRACTURE TO THE ANALYSIS OF THE SURFACE SHAPE VARIATION

401

Wear of ten dental restorative materials in five wear simulators—Results of a round robin test

402

Wear of the atomic force microscope tip under light load, studied by atomic force microscopy

403

Wear of the atomic force microscope tip under light load, studied by atomic force microscopy

404

Wear of the blade diamond tools in truing vitreous bond grinding wheels: Part I. Wear measurement and results

405

Wear of the blade diamond tools in truing vitreous bond grinding wheels: Part II. Truing and grinding forces and wear mechanism

406

Wear of the cutting edge in the bandsawing operation when cutting austenitic 17-7 stainless steel

407

Wear of thermal spray deposited low carbon steel coatings on aluminum alloys

408

Wear of truck brake lining materials using three different test methods

409

Wear of tungsten carbide–cobalt hardmetals and hot isostatically pressed high speed steels under dry abrasive conditions

410

Wear of UHMWPE against nitrogen-ion-implanted and NbN-coated Co–Cr–Mo alloy formed by plasma immersion ion implantation and deposition for artificial joints

411

Wear of UHMWPE from sliding, rolling, and rotation in a multidirectional tribo-system

412

Wear of ultra-high molecular weight polyethylene moving along a circular path in a hip simulator

413

Wear of water walls in a commercial circulating fluidized bed combustor with two gas exits

414

Wear of white cast irons by impact of direct reduced iron pellets

415

Wear of zirconia-dispersed alumina at ambient temperature, 140 °C and 250 °C

416

Wear on tool steel AISI M2, D6 and 52100 coated with Al2O3 by the MOCVD process

417

Wear particle analysis—utilization of quantitative computer image analysis: A review

418

Wear particle diffusion and tissue differentiation in TKA implant fibrous interfaces

419

Wear particle-mediated expressions of pro-inflammatory cytokines, NF-κB and RANK were impacted by lanthanum chloride in RAW264.7 cells

420

Wear particles enhance autophagy through up-regulation of CD147 to promote osteoclastogenesis

421

Wear particles, periprosthetic osteolysis and the immune system

422

Wear particles, surfaces and plastic flow generation in unimplanted and Mo ion implanted carbon steel under friction

423

Wear paths produced by individual hip-replacement patients—A large-scale, long-term follow-up study

424

Wear patterns and mechanisms of cutting tools in high-speed face milling

425

Wear patterns in two amalgams and three posterior composites after 5 yearsʹ clinical service

426

Wear patterns of, and wear volume formulae for, hemispherical acetabular cup liners

427

Wear patterns on tibial plateau from varus osteoarthritic knees

428

Wear performance and cost effectiveness––a criterion for the selection of grinding media for wet milling in mineral processing operations

429

Wear performance and wear debris of semimetallic automotive brake materials

430

Wear performance assessment of alternative stamping die materials utilizing a novel test system

431

Wear performance assessment of alternative stamping die materials utilizing a novel test system

432

Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions

433

Wear performance of Al–SiC–B4C hybrid composites under dry sliding conditions

434

Wear Performance of As-Cast and Heat Treated ZK60 Mg Alloy Under Different Applied Loads

435

Wear performance of bonded composite coatings under dry sliding

436

Wear performance of co-electrodeposited cermet coatings

437

Wear performance of copper–graphite composite and a leaded copper alloy

438

Wear performance of copper–graphite composite and a leaded copper alloy

439

Wear performance of copper–graphite composite and a leaded copper alloy

440

Wear performance of dental ceramics after grinding and polishing treatments

441

WEAR PERFORMANCE OF FLAT END-MILL CUTTER DURING MACHINING OF COPPER BASED METAL

442

Wear performance of in-situ Al–TiB2 composite

443

Wear performance of laser precoating treated cemented carbide milling tools

444

Wear performance of laser processed tantalum coatings

445

Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing

446

Wear performance of oil lubricated silicon nitride sliding against various bearing steels

447

Wear performance of PEEK–carbon fabric composites with strengthened fiber–matrix interface

448

Wear performance of SiC/G coating at elevated temperatures

449

Wear performance of substructure ceramics and veneering porcelains

450

Wear performance of tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique

451

Wear performance of the Fe-based alloy coatings produced by plasma transferred arc weld-surfacing process

452

Wear performance of the lead free tin bronze matrix composite reinforced by short carbon fibers

453

Wear performance of ultrahigh molecular weight polyethylene/quartz composites

454

Wear performances and wear mechanism study of bulk UHMWPE composites with nacre and CNT fillers and PFPE overcoat

455

Wear performances of surface hardened PM steel from pre-alloyed powder

456

Wear phenomena in high temperature sheet shearing blades

457

Wear phenomenon in the hard steel machining using ceramic tools

458

Wear prediction of ceramics

459

Wear prediction of friction material and brake squeal using the finite element method

460

Wear prevention behaviour of nanoparticle suspension under extreme pressure conditions

461

Wear prevention characteristics of binary oil mixtures

462

Wear problems in nuclear industry

463

Wear processes in rocks at slow to high slip rates

464

Wear progression of carbide tool in low-speed end milling of stainless steel

465

Wear progressions and tool life enhancement with AlCrN coated inserts in high-speed dry and wet steel lathing

466

Wear properties and microstructures of alumina matrix composite ceramics used for drawing dies

467

Wear properties of AISI 1015 steel coated with Stellite 6 by microlaser welding

468

Wear Properties of Al/MoS2 Nanocomposite Coatings Created by Electro Spark Deposition on the Surface of Ti-6Al-4V Alloy

469

Wear properties of alloyed layers produced by laser surface alloying of pure titanium with B4C and Ti mixed powders

470

Wear properties of cemented carbides/Cu-based alloy composite strengthening materials for milling shoes

471

Wear properties of cemented carbides/Cu-based alloy composite strengthening materials for milling shoes

472

Wear properties of Co–Cr–Mo–N plasma-melted surgical implant alloys

473

Wear properties of compact graphite cast iron with bionic units processed by deep laser cladding WC

474

Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites

475

Wear properties of CrC–37WC–18M coatings deposited by HVOF and HVAF spraying processes

476

Wear properties of DLC-coated steel rollers running with highly contaminated lubrication

477

Wear properties of ECAP-processed ultrafine grained Al–Cu alloys

478

Wear properties of functionally gradient layers on stainless steel substrates for high temperature applications

479

Wear properties of high pressure torsion processed ultrafine grained Al–7%Si alloy

480

Wear properties of high-pressure die cast and thixoformed aluminium alloys for connecting rod applications in compressors

481

Wear properties of micro arc oxidized and hydrothermally treated Ti6Al4V alloy in simulated body fluid

482

Wear properties of MOCVD-grown aluminium oxide films studied by cavitation erosion experiments

483

Wear properties of nickel coating film plated from emulsion with dense carbon dioxide

484

Wear properties of Ni–Mo coatings produced by pulse electroforming

485

WEAR PROPERTIES OF PASTE BORONIZED 316 STAINLESS STEEL BEFORE AND AFTER SHOT BLASTING PROCESS

486

Wear properties of Saffil/Al, Saffil/Al2O3/Al and Saffil/SiC/Al hybrid metal matrix composites

487

Wear properties of self-reinforced α-SiAlON ceramics produced by spark plasma sintering

488

Wear properties of the composites fabricated by exothermic dispersion reaction synthesis in an Al–TiO2–B2O3 system

489

Wear properties of Ti and Ti–6Al–7Nb castings for dental prostheses

490

Wear properties of Ti–13Zr–13Nb (wt.%) near β titanium alloy containing 0.5 wt.% boron in dry condition, Hankʹs solution and bovine serum

491

Wear properties of two-phase Al2O3/ZrO2 (Y2O3) ceramics at temperatures from 296 to 1073 K

492

Wear properties of Y–α/β composite sialon ceramics

493

Wear properties of zirconia/alumina combination for joint prostheses

494

Wear properties of α- and α/β-SiAlON ceramics obtained by gas pressure sintering and spark plasma sintering

495

Wear properties under dry sliding of Lu-α sialons with in situ reinforced microstructures

496

Wear Property of Cast Steel Wheel Material in Rail Truck Original Research Article

497

Wear property of low-temperature bainite in the surface layer of a carburized low carbon steel

498

Wear protection of surfaces from high pressure grinding rolls: possibilities and limits

499

Wear protective coatings consisting of TiC–SiC–a-C:H deposited by magnetron sputtering

500

Wear quantification of human enamel and dental glass–ceramics using white light profilometry

501

Wear ranking of hard on hard bearings for prosthetic hip joints

502

Wear rate and surface morphology of UHMWPE cups are affected by the serum lubricant concentration in a hip simulation test

503

Wear rate evaluation of a novel polycarbonate-urethane cushion form bearing for artificial hip joints

504

Wear rate model for UHMWPE in total hip and knee arthroplasty

505

Wear rate model for UHMWPE in total joint applications

506

Wear rate of animal-drawn ploughshares in selected Ghanaian soils

507

Wear rate of animal-drawn ploughshares in selected Ghanaian soils

508

Wear rate of vertically grown ZnO nanowires sliding against steel micro-sphere

509

WEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES

510

Wear rate, frictional temperature, and energy consumption of steel 52100 with different microstructures during sliding

511

Wear rates of regular and tempered composites

512

Wear reducing effects and temperature dependence of tribolayer formation in harsh environment

513

Wear reduction effect on ultra-high-molecular-weight polyethylene by application of hard coatings and ion implantation on cobalt chromium alloy, as measured in a knee wear simulation machine

514

Wear reduction in AISI 630 martensitic stainless steel after energetic nitrogen ion implantation

515

Wear reduction mechanism of graphite and MoS2 in epoxy composites

516

Wear reduction of orthopaedic bearing surfaces using polyelectrolyte multilayer nanocoatings

517

WEAR REESISTANCE OF NANOSTRUCTURED AND CONVENTIONAL YTTRIA-STABILIZED ZIRCONIA COATINGS

518

Wear resistance after low-energy high-flux nitrogen implantation of AISI 304L stainless steel

519

Wear resistance and anti-sticking properties of duplex treated forming tool steel

520

Wear resistance and electroconductivity in copper processed by severe plastic deformation

521

WEAR RESISTANCE AND FATIGUE STRENGTH OF THE COATINGS DEPOSITED BY MEANS OF ELECTROMAGNETIC SURFACING

522

WEAR RESISTANCE AND FATIGUE STRENGTH OF THE COATINGS DEPOSITED BY MEANS OF ELECTROMAGNETIC SURFACING

523

Wear resistance and induced cutting damage of aeronautical FRP components obtained by machining

524

Wear resistance and microstructural properties of Ni–Al/h-BN/WC–Co coatings deposited using plasma spraying

525

Wear resistance and thermal conductivity of Zr-base amorphous alloy/metal surface composites fabricated by high-energy electron beam irradiation

526

Wear resistance enhancement of electroless nanocomposite coatings via incorporation of alumina nanoparticles prepared by milling

527

Wear resistance enhancement of the titanium alloy Ti–6Al–4V via a novel co-incident microblasting process

528

Wear resistance evaluation of plasma nitrocarburized AISI 316L stainless steel

529

Wear resistance glass-ceramics with a gahnite phase obtained in CaO-MgO-ZnO-Al2O3-B2O3-SiO2 system

530

Wear Resistance Improvement for Grinding Balls of Horizontal Cement Mill in Cement Plant by Nano-Coating Technique

531

Wear resistance improvement of sintered structural parts by C7H7 surface carburizing

532

Wear resistance of a high-nitrogen austenitic stainless steel coated with nitrogenated amorphous carbon films

533

Wear resistance of a laser alloyed A-356 aluminum/WC composite

534

Wear resistance of a laser surface alloyed Ti–6Al–4V alloy

535

Wear resistance of a pressable low-fusing ceramic opposed by dental alloys

536

Wear Resistance of Acrylic Resin Teeth against Porcelain and Natural Teeth

537

Wear resistance of Al2O3–CNT ceramic nanocomposites at room and high temperatures

538

Wear resistance of aluminium alloy and its composites reinforced by Al2O3 particles

539

Wear resistance of annealed plain carbon steels in pre-strained condition

540

Wear resistance of bodies protected by a thin composite coating

541

Wear resistance of cast irons used in brake disc rotors

542

Wear resistance of chromium oxide nanostructured coatings

543

Wear Resistance of CO2 Corrosion Product Scale Formed at High Temperature Original Research Article

544

Wear resistance of coatings in high speed gear hobbing

545

Wear resistance of Cu–18 vol.% Nb (P/M) composites

546

Wear resistance of Cu–Ni–Mo austempered ductile iron

547

Wear resistance of CVD and PVD multilayer coatings when dry cutting fiber reinforced polymers (FRP)

548

Wear resistance of dilute Zn–Al alloys

549

Wear resistance of experimental Ti–Cu alloys

550

Wear resistance of experimental titanium alloys for dental applications

551

Wear resistance of high nodule count ductile iron

552

Wear resistance of high-speed steels and cutting performance of tool related to structural factors

553

Wear resistance of hot-pressed Si3N4/SiC micro/nanocomposites sintered with rare-earth oxide additives

554

Wear resistance of in situ MMC produced by supersolidus liquid phase sintering (SLPS)

555

Wear resistance of in situ synthesized titanium compound coatings produced by laser alloying technique

556

Wear resistance of laser clad Ti2Ni3Si reinforced intermetallic composite coatings on titanium alloy

557

Wear resistance of laser-clad Ni–Cr–B–Si alloy on aluminium alloy

558

Wear resistance of laser-deposited boride reinforced Ti-Nb–Zr–Ta alloy composites for orthopedic implants

559

Wear resistance of multilayered sol–gel silica layers on aluminium matrix composites

560

Wear resistance of nanocrystalline composite NI-B coatings

561

Wear resistance of nanoparticle coatings on paperboard

562

Wear resistance of NiTi alloy after surface mechanical attrition treatment

563

Wear resistance of nitrided and DLC coated PH stainless steel

564

Wear resistance of plasma coatings for a constant work of friction

565

Wear resistance of plasma sprayed Al–Si binary alloy coatings on A6063 Al alloy substrate

566

Wear resistance of polymer-impregnated mortars and concrete

567

Wear resistance of pulse plasma nitrided AISI 4140 and A355 steels

568

Wear resistance of pulse plasma nitrided AISI 4140 and A355 steels

569

Wear resistance of PVD-coatings in roller bearings

570

Wear resistance of reaction sintered alumina/mullite composites

571

Wear resistance of reactive plasma sprayed and laser remelted TiB2–TiC0.3N0.7 based composite coatings against medium carbon steel

572

Wear resistance of thermal sprayed coatings on the base of recycled hardmetal

573

Wear resistance of Ti–6Al–4V alloy treated by means of glow-discharge and furnace treatments

574

Wear resistance of TiAl intermetallics by plasma alloying and plasma carburization

575

Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity

576

Wear resistance of WCp/Duplex Stainless Steel metal matrix composite layers prepared by laser melt injection

577

Wear resistance of Zr-based bulk metallic glass applied in bearing rollers

578

Wear resistance of Zr-based bulk metallic glass applied in bearing rollers

579

Wear resistance of Zr-based bulk metallic glass applied in bearing rollers

580

Wear resistance optimisation of composite coatings by computational microstructural modelling

581

Wear resistance performance of thermally sprayed Al3Ti alloy measured by three body micro-scale abrasive wear test

582

Wear resistance properties of stainless steel modified with co-implantation of V+C

583

Wear resistant alumina coatings produced by a sol–gel process

584

Wear resistant electrically conductive Au–ZnO nanocomposite coatings synthesized by e-beam evaporation

585

Wear resistant properties of multi-walled carbon nanotubes reinforced Al2O3 nanocomposites

586

Wear resistant self-healing tribological surfaces by using hard coatings on NiTi shape memory alloys

587

Wear resistant surface treatment of pulverizer blades

588

Wear resistant UHMWPE with high toughness by high temperature melting and subsequent radiation cross-linking

589

Wear resistivity of super-precision microgear made of Ni-based metallic glass

590

Wear response and mechanical behaviour of silicone-based photoluminescent coatings

591

Wear response of a zinc-based alloy containing silicon as influenced by material microstructure and test conditions

592

Wear response of a zinc-based alloy containing silicon as influenced by material microstructure and test conditions

593

Wear response of heat-treated Ti–13Zr–13Nb alloy in dry condition and simulated body fluid

594

Wear simulation of reverse total shoulder arthroplasty systems: effect of glenosphere design

595

Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon

596

Wear stability of polymer nanocomposite coatings with trilayer architecture

597

Wear studies of (Ti–Al)N coatings deposited by reactive magnetron sputtering

598

Wear studies of hydroxyapatite composite coating reinforced by carbon nanotubes Original Research Article

599

Wear study of field worn clutch actuators and evaluation of a model test

600

Wear surface studies on coal water slurry nozzles in industrial boilers

601

Wear testing and measurement techniques for polymer composite gears

602

Wear testing and specification of hydraulic fluid in industrial applications

603

Wear testing for industry

604

Wear testing for industry

605

Wear testing of high Fe–N–C steels

606

Wear testing of saw teeth in timber cutting

607

Wear tests in a hip joint simulator of different CoCrMo counterfaces on UHMWPE

608

Wear tests of steel knife blades

609

Wear transition of a lubricated sliding steel contact as a function of surface texture anisotropy and formation of boundary layers

610

Wear transitions and stability of polyoxymethylene homopolymer in highly loaded applications compared to small-scale testing

611

Wear transitions in a wear coefficient model

612

Wear volume determination during running-in for PEHL contacts

613

Wear volume prediction with artificial neural networks

614

Wear, corrosion and cracking resistance of some W- or Mo-containing Stellite hardfacing alloys

615

Wear, cutting forces and chip characteristics when dry turning ASTM Grade 2 austempered ductile iron with PcBN cutting tools under finishing conditions

616

Wear, erosion and corrosion resistance of CrTiAlN coating deposited by magnetron sputtering

617

Wear, plastic deformation and friction of two rail steels—a full-scale test and a laboratory study

618

Wear: mechanisms, manifestations and measurement. Report of a workshop

619

Wearable Cardioverter-Defibrillator Use in Patients Perceived to Be at High Risk Early Post-Myocardial Infarction

620

Wearable computing and artificial intelligence for healthcare applications

621

Wearable Defibrillator in Congenital Structural Heart Disease and Inherited Arrhythmias

622

Wearable Device for Yogic Breathing with Real-Time Heart Rate and Posture Monitoring

623

Wearable electromyography measurement system using cable-free network system on conductive fabric

624

Wearable handwriting input device using magnetic field: 2nd report: Influence of misalignment of magnet and writing plane

625

Wearable handwriting input device using magnetic field: Geomagnetism cancellation in position calculation

626

Wearable long-term mechanical support for patients with end-stage heart disease: A tenable goal

627

Wearable low and high frequency acoustic systems

628

Wearable Measurement Unit for Objective Assessment of Catching and Underhand Throwing Development

629

Wearable music in engaging technologies

630

Wearable sensorised system for analysing the human movement during athletic activity

631

Wearable sensors and telerehabilitation

632

Wearable sensors for the real-time assessment of gait temporal symmetry in above-knee amputees: A validation study

633

Wearable sensors for the real-time assessment of gait temporal symmetry in above-knee amputees: The ‘SEAG’ protocol

634

Wearable smart blanket system model for monitoring the vital signs of patients in ambulance

635

Wearable system for post stroke rehabilitation of the upper-limb

636

Wearable Technologies, Portable Architectures and the Vicissitudes of the Space Between

637

Wearable Technology in sport, a convergence of trends

638

Wearable Textile Antenna on Electromagnetic Band Gap (EBG) for WLAN Applications

639

Wearable Wireless Body Area Networks for Medical Applications

640

Wearable Wireless Sensors for Measuring Calorie Consumption

641

Wearables as “relationship tools”

642

Wearbehaviorofgraphitestudiesinanair-conditionedenvironmentOriginalResearchArticle

643

Wear–corrosion behavior of biocompatible austenitic stainless steels

644

Wear–corrosion mechanism of hard chromium coatings

645

Wear-in behaviour of polycrystalline diamond thrust bearings

646

Wear-induced microstructure in Ni/Cu nano-multilayers

647

Wearing a watch can endanger your life

648

Wearing Cotton-polyester Gloves Under Surgical Latex Gloves to Improve the Symptoms of Hand Dermatitis in Operating Room Staffa

649

Wearing face mask detection using deep learning during COVID-19 pandemic

650

Wearing many hats: Supply managersʹ behavioral complexity and its impact on supplier relationships

651

Wearing mask in children: Do s and Don’ts

652

Wearing out your shoes to prevent someone else from stepping into them: Anticipated regret and social takeover in sequential decisions

653

Wearing Time of Ankle-Foot Orthoses with Modular Shank Supply in Cerebral Palsy: A Descriptive Analysis in a Clinically Prospective Approach

654

Wearing-out of components in a variable environment

655

Wear-life evaluation of CrN-coated steels using acoustic emission signals

656

Wear-mechanical properties of filler-added liquid silicon infiltration C/C–SiC composites

657

Wear-mechanism map of amorphous carbon nitride coatings sliding against silicon carbide balls in water

658

Wear-mode mapping for the micro-scale abrasion test

659

Wear-out of Al–Ta2O5/SiO2–Si structures under dynamic stress

660

WearperformanceandactivityreductioneffectofCo-freevalvesinPWRenvironmentOriginalResearchArticle

661

Wear-resist Electrodes for Micro-EDM

662

Wear-resistance comparison of carbon nanotubes and conventional silicon-probes for atomic force microscopy

663

Wear-resistant and low-friction diamond-like-carbon (DLC)-layers for industrial tribological applications under humid conditions

664

Wear-resistant and transparent acrylate-based coating with highly filled nanosilica particles

665

Wear-resistant coatings on aluminium produced by plasma anodising—A correlation of wear properties, microstructure, phase composition and distribution

666

Wear-resistant engineering ceramics

667

Wear-resistant metal-carbon composite coating

668

Wear-resistant metallic and elastomeric materials in the mining and mineral processing industries — an overview

669

Wear-resistant ultra-fine-grained ceramics

670

Wear-resistant ultra-fine-grained ceramics Original Research Article

671

Wear-testing of a temporomandibular joint prosthesis: UHMWPE and PTFE against a metal ball, in water and in serum

672

Weather analogue: A tool for real-time prediction of daily weather data realizations based on a modified k-nearest neighbor approach

673

Weather and climate induced spatial variability of surface suspended particulate matter concentration in the North Sea and the English Channel

674

Weather and Climate: The M.P. Singh Volume Part II

675

Weather as an effective predictor for occurrence of dengue fever in Taiwan

676

Weather conditions and outdoor recreation: A study of New England ski areas

677

Weather conditions associated with irrigated crops in an arid and semi arid environment

678

Weather cycles, real or imaginary?: By W.J. Burroughs. Cambridge University Press, 1994. Paperback, 207 pp. Price £14.95. ISBN 0-521-47869-3

679

Weather data analysis and design implications for different climatic zones in China

680

Weather data and analysis of hybrid photovoltaic–wind power generation systems adapted to a seawater greenhouse desalination unit designed for arid coastal countries Original Research Article

681

Weather data and energy balance of a hybrid photovoltaic-wind system with hydrogen storage

682

Weather data and heating-degree days for Saudi Arabia

683

Weather data and probability analysis of hybrid photovoltaic–wind power generation systems in Hong Kong

684

Weather disturbances in the low latitude ionosphere and their low altitude modeling Original Research Article

685

Weather Downtime and its Effect on Fishing Operation in Peninsular Malaysia

686

Weather driven influences on phytoplankton succession in a shallow lake during contrasting years: Application of PROTBAS

687

Weather driven influences on phytoplankton succession in a shallow lake during contrasting years: Application of PROTBAS

688

Weather Effects on Daily Water Use in New York City

689

Weather effects on returns: Evidence from the Korean stock market

690

Weather effects on the returns and volatility of the Shanghai stock market

691

WEATHER EXPOSURE AND ITS EFFECT ON BRIDGE DECK CURING IN ALABAMA

692

WEATHER EXPOSURE AND ITS EFFECT ON BRIDGE DECK CURING IN ALABAMA

693

Weather fluctuations: predictive factors in the prevalence of acute coronary syndrome

694

Weather forecasting for dinosaurs

695

Weather modelling using a multivariate latent Gaussian model

696

Weather radar and hydrology

697

Weather reacting to geomagnetic storms Original Research Article

698

Weather regimes and orographic circulation around New Caledonia

699

Weather regimes—Moroccan precipitation link in a regional climate change simulation

700

Weather resistance of low carbon high performance bridge steel

701

Weather sensitive method for short term load forecasting in Electric Power Utility of Serbia

702

Weather sensitivity in household appliance energy end-use

703

Weather services products generation system based on GIS geoprocessing

704

Weather system scale variation in radon-222 concentration of indoor air

705

Weather Variability and the Incidence of Cryptosporidiosis: Comparison of Time Series Poisson Regression and SARIMA Models

706

Weather, climate and tourism a geographical perspective

707

Weather, ice, and snow conditions at Deception Island, Antarctica: long time-series photographic monitoring

708

WEATHER, SEASONAL TRENDS AND PROPERTY CRIMES IN MINNEAPOLIS, 1987–1988. A MODERATOR-VARIABLE TIME-SERIES ANALYSIS OF ROUTINE ACTIVITIES

709

Weather, storage, and natural gas price dynamics: Fundamentals and volatility

710

Weatherability and acceptance of selected commercial zinc phosphide rodent baits

711

Weatherability flexural properties of CFRP subjected to accelerated and outdoor exposures

712

Weatherability of a steam-rolled oat groat chlorophacinone ground squirrel bait under field and laboratory conditions

713

Weatherability of coated fabrics as roofing material in tropical environment

714

Weather-adaptive flying target detection and tracking from infrared video sequences

715

Weather-based distribution system reliability evaluation

716

Weather-based forecasting systems reduce fungicide use for early blight of celery

717

Weather-Based Index Insurance Pricing- Canonical Vine Copula Function Approach

718

Weather-based prediction of anthracnose severity using artificial neural network models

719

Weather-dependent change of cesium, strontium, barium and tellurium contamination deposited as aerosols on various cultures

720

Weather-driven changes in population density determine wing dimorphism in a bush-cricket species

721

Weathered pumice influence on selected alluvial soil properties in west Nayarit, Mexico

722

Weathered volcanic crust and its petroleum geological significance: A case study of the Carboniferous volcanic crust in northern Xinjiang, NW China

723

Weather-induced changes in the tradeoff between SO2 and NOx at large power plants

724

Weather-induced temporal variations in nitrate concentrations in shallow groundwater

725

Weathering aging of modified asphalt binders

726

Weathering alteration and related REE concentration in the Catalمo I carbonatite complex, central Brazil

727

Weathering and atmospheric deposition signatures of base cations in upland soils of NE Scotland: their application to critical load assessment

728

Weathering and clay mineral formation in two Holocene soils and in buried paleosols in Tadjikistan: towards a Quaternary paleoclimatic record in Central Asia

729

Weathering and erosion fluxes of arsenic in watershed mass budgets

730

Weathering and evolution of soils formed on granitic, glacial deposits: results from chronosequences of Swiss alpine environments

731

Weathering and Geomorphology

732

Weathering and landscape evolution

733

Weathering and morphogenesis in a mediterranean climate, Calabria, Italy

734

Weathering and paleosol formation in the 1.1 Ga Keweenawan Rift

735

Weathering and particle entrapment at the rock–lichen interface in Italian volcanic environments

736

Weathering and pedogenesis in the Sila Grande Massif (Calabria, South Italy): From field scale to micromorphology

737

Weathering and sediment generation in the Archean: An integrated study of the evolution of siliciclastic sedimentary rocks of the 3.2 Ga Moodies Group, Barberton Greenstone Belt, South Africa

738

Weathering and soil development on fan surfaces as a function of height above modern drainageways, Roan Mountain, North Carolina

739

Weathering and soil formation rates based on geochemical mass balances in a small forested watershed under acid precipitation in subtropical China

740

Weathering and the formation of hillslope deposits in the tropical highlands of Itatiaia — southeastern Brazil

741

Weathering and the global carbon cycle: Geomorphological perspectives

742

Weathering and transport of sediments in the Bolivian Andes: Time constraints from uranium-series isotopes

743

Weathering and vegetation effects in early stages of soil formation

744

Weathering assessment in the Achala Batholith of the Sierra de Comechingones, Córdoba, central Argentina. I: Granite–regolith fractionation

745

Weathering behaviour of wood-faced construction materials

746

Weathering characteristics of arctic islands in northern Norway

747

Weathering climate change: some simple rules to guide adaptation decisions

748

Weathering damage on Pharaonic sandstone monuments in Luxor-Egypt

749

Weathering detected by Raman spectroscopy using Al-ordering in albite

750

Weathering distribution in a steep slope of soft pyroclastic rocks as an indicator of slope instability

751

Weathering effects on external wall tiling systems

752

Weathering effects on the strength and deformational behaviour of crystalline rocks under uniaxial compression state

753

Weathering flux and CO2 consumption determined from palaeosol sequences across the Eocene–Oligocene transition

754

Weathering grade of rock masses as a predisposing factor to slope instabilities: Reconnaissance and control procedures

755

Weathering history of an exposed bedrock fault surface interpreted from its topography

756

Weathering implications of water chemistry in an arctic–alpine environment, northern Sweden

757

Weathering in the Lake Baikal watershed during the Kazantsevo (Eemian) interglacial: Evidence from the lacustrine clay record

758

Weathering in three podzolized pedons on glacial deposits in northern Sweden and central Finland

759

Weathering indices for rhyolitic tuff and granite in Hong Kong

760

Weathering Induced Brazilian Tensile Strength and Fracture Characteristics of Sandstone and their Prevailing Mutual Association

761

Weathering instability and landscape evolution

762

Weathering Intensity in Lowland River Basins: From the Andes to the Amazon Mouth

763

Weathering kinetics of waste rock from the Aitik copper mine, Sweden: scale dependent rate factors and pH controls in large column experiments

764

Weathering mantles and their significance for geomorphological evolution of central and northern Europe since the Mesozoic

765

Weathering mechanisms and their effects on the landsliding of ignimbrite subject to vapor-phase crystallization in the Shirakawa pyroclastic flow, northern Japan

766

Weathering of a gypsum-calcareous mudstone under semi-arid environment at Tabernas, SE Spain: laboratory and field-based experimental approaches

767

Weathering of a lime-treated clayey soil by drying and wetting cycles

768

Weathering of a MSW bottom ash heap: a modelling approach

769

Weathering of a subarctic oil spill over 25 years: the Caribou-Poker Creeks Research Watershed experiment

770

Weathering of ammonium- or calcium-saturated 2:1 phyllosilicates by ectomycorrhizal fungi in vitro

771

Weathering of ammonium- or calcium-saturated 2:1 phyllosilicates by ectomycorrhizal fungi in vitro

772

Weathering of an Arctic oil spill over 20 years: the BIOS experiment revisited

773

Weathering of basaltic pebbles in a red soil from Sardinia: A microsite approach for the identification of secondary mineral phases

774

Weathering of biotite in the presence of arbuscular mycorrhizae in selected agricultural crops

775

Weathering of building stones and its relationship to the sustainable management of the aggregate resources in Gaza Strip, Palestine

776

Weathering of Chinese Basaltic Fields

777

Weathering of chitosan films in the presence of low- and high-molecular weight additives

778

Weathering of copper–amine treated wood

779

Weathering of dolomitic sandstone under ambient conditions

780

Weathering of Fe-bearing minerals under Martian conditions, investigated by Mِssbauer spectroscopy

781

Weathering of gneiss in Calabria, Southern Italy

782

Weathering of gneissic rocks in the upper reaches of Cauvery river, south India: implications to neotectonics of the region

783

Weathering of granites in a temperate climate (NW Portugal): granitic saprolites and arenization

784

WEATHERING OF GRANODIORITE MONUMENTS: THE CASE OF A SQUATTING STATUE IN TEMPLE OF KARNAK, LUXOR, EGYPT

785

Weathering of hydrocarbons in mangrove sediments: testing the effects of using dispersants to treat oil spills

786

Weathering of igneous rocks during shallow burial in an upland peat environment: observations from the Bronze Age Copney Stone Circle Complex, Northern Ireland

787

Weathering of Leinster granite under ambient atmospheric conditions

788

Weathering of limestone building material by mixed sulfate solutions. Characterization of stone microstructure, reaction products and decay forms

789

Weathering of lower crustal rocks in the Kaveri river catchment, southern India: Implications to sediment geochemistry

790

Weathering of phlogopite in simulated bioleaching solutions

791

Weathering of plagioclase across variable flow and solute transport regimes

792

Weathering of polypropylene composites containing weldlines

793

Weathering of primary minerals and mobility of major elements in soils affected by an accidental spill of pyrite tailing

794

Weathering of quartz as an Archean climatic indicator

795

Weathering of radiocaesium contamination on urban streets, walls and roofs

796

Weathering of rocks and neogenesis of minerals associated with lichen activity

797

Weathering of rocks induced by lichen colonization — a review

798

Weathering of roofing materials – An overview

799

Weathering of sandstone clasts in a forest soil in Tuscany (Italy)

800

Weathering of soapstone in a historical perspective

801

Weathering of Soils in Alpine Areas as Influenced by TClimate and Parent Material

802

Weathering of sulphide minerals and trace element speciation in tailings of various ages in the Guanajuato mining district, Mexico

803

Weathering of the black limestone of historical monuments (Ljubljana, Slovenia): Oxygen and sulfur isotope composition of sulfate salts

804

Weathering of the Ganga alluvial plain, northern India: implications from fluvial geochemistry of the Gomati River

805

Weathering of the New Albany Shale, Kentucky, USA: I. Weathering zones defined by mineralogy and major-element composition

806

Weathering of the New Albany Shale, Kentucky: II. Redistribution of minor and trace elements

807

Weathering of the Oporto granite: geotechnical and physical properties

808

Weathering of Valle Ricca stiff and jointed clay

809

Weathering on land and transport of chromium to the ocean in a subtropical region (Misiones, NW Argentina): A chromium stable isotope perspective

810

Weathering Patterns of Oil Residues Eight Years after the Exxon Valdez Oil Spill

811

Weathering performance of the polyurethane nanocomposite coatings containing silane treated TiO2 nanoparticles

812

Weathering processes in Arctic oil spills: Meso-scale experiments with different ice conditions

813

Weathering processes in superficial deposits (regolith) and their influence on pedogenesis: A case study in the Swiss Jura Mountains

814

Weathering processes in the Ganges–Brahmaputra basin and the riverine alkalinity budget

815

Weathering processes in the Indus River Basin: implications from riverine carbon, sulfur, oxygen, and strontium isotopes

816

Weathering processes in waste materials from a mining area in a semiarid zone

817

Weathering processes only partially limit the potential for bioremediation of hydrocarbon-contaminated soils

818

Weathering profile of non-welded ignimbrite and the water infiltration behavior within it in relation to the generation of shallow landslides

819

Weathering profile of the Cerro de Maimَn VMS deposit (Dominican Republic): textures, mineralogy, gossan evolution and mobility of gold and silver

820

Weathering profiles in granites, Sierra Norte (Cَrdoba, Argentina)

821

Weathering properties of treated southern yellow pine wood examined by X-ray photoelectron spectroscopy, scanning electron microscopy and physical characterization

822

Weathering rate of mudstone and tuff on old unlined tunnel walls

823

Weathering rates and anthropogenic influences in a sedimentary basin, São Paulo State, Brazil

824

Weathering rates as a function of climate: results from a climosequence of the Val Genova (Trentino, Italian Alps)

825

Weathering rates from top to bottom in a carbonate environment

826

Weathering rates of bedrock by lichens: a mini watershed study

827

Weathering rates of fine pebbles at the soil surface in Kنrkevagge, Swedish Lapland

828

Weathering rates of historic sandstone structures in semiarid environments (Ebro basin, NE Spain)

829

Weathering rates of oil components in a bioremediation experiment in estuarine sediments

830

Weathering release of heavy metals from soil in comparison to deposition, litterfall and leaching fluxes in a remote, boreal coniferous forest

831

Weathering rind formation in buried terrace cobbles during periods of up to 300ka

832

Weathering rinds on clasts: Examples from Earth and Mars as short and long term recorders of paleoenvironment

833

Weathering rinds: Unlikely host clasts for evidence of an impact-induced event

834

Weathering risk in rural Mexico: Climatic, institutional, and economic change

835

Weathering the storm: Hauserʹs Vernacular Voices, public relations and the Roman Catholic Churchʹs sexual abuse scandal

836

Weathering the storm-Taiwan, its neighbors, and the asian financial crisis: Peter C. Y. Chow and Bates Gill, editors; Washington, D.C., Brookings Institution Press, 2000, 234 pages, ISBN 0-8157-1399-1 (US$ 19.95)

837

Weathering traces in ancient bricks from historic buildings

838

Weathering trends and parent material characteristics of polygenetic oxisols from Minas Gerais, Brazil: I. Mineralogy

839

Weathering trends in terrace deposits up to 350,000 years old in northeast Southland, New Zealand

840

Weathering variability and aluminium interlayering: clay mineralogy of podzol profiles in till and glaciofluvial deposits, SW Sweden

841

Weathering versus atmospheric contributions to mercury concentrations in French Guiana soils

842

Weathering zones on metamorphic rocks from Rio de Janeiro—Physical, mineralogical and geomechanical characterization

843

Weathering, atmospheric deposition and vegetation uptake: role for ecosystem sensitivity to acid deposition and critical load

844

Weathering, geomorphic work, and karst landscape evolution in the Cave City groundwater basin, Mammoth Cave, Kentucky

845

Weathering, mineralogical evolution and soil organic matter along a Holocene soil toposequence developed on carbonate-rich materials

846

Weathering-limited rainfall-triggered shallow mass movements in undisturbed steepland tropical rainforest

847

Weatherizing the homes of low-income home energy assistance program clients: a programmatic assessment

848

Weather-predicted control of building free cooling system

849

Weave-Repeat Identification by Structural Analysis of Fabric Images

850

WEAVESIM: A SCALABLE AND REUSABLE CLOUD SIMULATION FRAMEWORK LEVERAGING ASPECT-ORIENTED PROGRAMMING

851

WEAVING AND MAT MAKING AT CHALCOLITHIC SMINTHEION (GÜLPINAR)

852

Weaving meaning? An exploration of the interplay between lay and professional understandings of cervical cancer risk

853

Weaving new retail and consumer landscapes in the Scottish Borders

854

Weaving reflexivity and revealing of the self in online foreign language practice

855

Weaving Reflexivity and Revealing of the Self in Online Foreign Language Practice

856

Weaving Scholarly Legacy Data into Web of Data

857

Weaving strands of writer identity: Self as author and the NNES “plagiarist”

858

Weaving technology and mechanical properties of extended-PTFE fabrics

859

Weaving the Web of ER Tubules

860

Weaving the web: Using the world wide web in library acquisitions

861

Weaving the Western Web: explaining differences in Internet connectivity among OECD countries

862

Weaving Versus Blending: a quantitative assessment of the information carrying capacities of two alternative methods for conveying multivariate data with color.

863

Web 101: making the net work for you, 2nd edition: Wendy G Lehnert (Ed.); Addison-Wesley, Boston, October 2002, 686 pages, price $60, ISBN 0-321-12947-4

864

Web 2 technologies for Net Native languagelearners: a ‘‘social CALL’’

865

Web 2.0 according to Wikipedia: Capturing an organizing vision

866

Web 2.0 Adoption by Danish Newspapers - Urgent Need for New Business Models?

867

Web 2.0 and folksonomies in a library context

868

Web 2.0 and Information Literacy Instruction: Aligning Technology with ACRL Standards Original Research Article

869

Web 2.0 and its dimensions in the scholarly world

870

Web 2.0 and Libraries: Impacts, Technologies and Trends, Dave Parkes, Geoff Walton. Chandos Publishing, Oxford, UK (2010), ISBN: 978-1-84334-346-2

871

Web 2.0 and Social Networking Services in Municipal Emergency Management: A Study of U.S. Cities

872

Web 2.0 Applications of Geographic and Geospatial Information

873

Web 2.0 for Librarians and Information Professionals, E. Kroski. Neal-Schuman Publishers (2008)

874

Web 2.0 Integration in Information Literacy Instruction: An Overview Original Research Article

875

Web 2.0 online collaboration tools as environments for task-based writing instruction

876

WEB 2.0 SOLUTIONS TO WICKED CLIMATE CHANGE PROBLEMS

877

Web 2.0 Technologies and Applications in the Best Practice Networks and Communities

878

WEB 2.0 TOOLS FOR SUPPORTING TEACHING

879

WEB 2.0 TOOLS IN FACILITATING THE CONSTRUCTION OF KNOWLEDGE IN HIGHER EDUCATION

880

Web 2.0 use by librarians

881

Web 2.0: Applications and Mechanisms J.UCS Special Issue

882

WEB 2.0ʹS MARKETING IMPACT ON LOW-INVOLVEMENT CONSUMERS

883

WEB 2086, a platelet-activating factor antagonist, inhibits prophenoloxidase-activating system and hemocyte microaggregation reactions induced by Trypanosoma rangeli infection in Rhodnius prolixus hemolymph

884

Web 2D Graphics File Formats

885

Web Acceptance Model (WAM): Moderating effects of user experience

886

Web Acceptance Model (WAM): Moderating effects of user experience

887

Web Access Pattern Algorithms in Education Domain

888

Web Accessibility: A Foundation for Research

889

Web advertising: Sexual content on eBay

890

Web advertising: The role of e-mail marketing

891

Web aesthetics effects on perceived online service quality and satisfaction in an e-tail environment: The moderating role of purchase task

892

893

894

895

896

897

898

899

900

Web alert amorphous materials molecular crystals characterization techniques

901

Web alert characterization techniques amorphous materials molecular crystals

902

Web alert electronic materials solid catalysts and porous solids

903

Web alert Immunity to infection Genetic effects on immunity HIV

904

Web alert Modelling and simulation of solids Polymers

905

Web alert surface science ceramics, composites and intergrowths

906

Web alert surfactant science biological aspects

907

Web alert: Cell biology

908

Web and Database Software for Identification of Intact Proteins Using "Top Down" Mass Spectrometry

909

Web and social media usage by museums: Online value creation

910

Web Application Slicing in Presence of Dynamic Code Generation

911

Web application transformations based on rewrite rules

912

Web Applications for Total Quality Management

913

Web Authoring for Accessibility (WAfA)

914

WEB Based Analysis of Bicycle Accidents in Konya With Desicion Support Systems

915

WEB- BASED DISTANCE EDUCATION: OPPORTUNITIES AND THREATS

916

WEB BASED E-LEARNING IN INDIA: THE CUMULATIVE VIEWS OF DIFFERENT ASPECTS

917

WEB BASED E-LEARNING PROGRAM DICTATION AND ITS IMPACT ON ACADEMIC PROGRESS OF THE THIRD GRADE STUDENTS OF PRIMARY SCHOOL

918

Web based electronic logbook and experiment run database viewer for Alcator C-Mod

919

Web Based Land Information System of Tuticorin(LIST), Tamilnadu, India.

920

Web based medical decision support system application of Coronary Heart Disease diagnosis with Boolean functions minimization method

921

Web Based OOP Domain Ontology (WOOPDO)

922

Web based social and environmental communication in the Australian minerals industry: an application of media richness framework

923

Web based system architecture for long pulse remote experimentation

924

Web booksellers—their usefulness to libraries

925

Web browser, whatʹs that secret youʹre keeping?

926

Web buckling of lightsteel beams strengthened with CFRP subjected to end-bearing forces

927

Web cache management based on the expected cost of web objects

928

Web cache optimization with nonlinear model using object features

929

Web caching and content distribution: a view from the interior

930

Web caching with consistent hashing

931

Web Citation Data for Impact Assessment: A Comparison of Four Science Disciplines

932

Web classification of conceptual entities using co-training

933

Web computing framework

934

Web computing framework

935

Web content adaptation to improve server overload behavior

936

Web Content Analysis of National Libraries’ Websites in Asia: An Evaluation

937

Web Content Management Systems, a Collaborative Environment in the Information Society

938

Web content management: a collaborative approach. By Nakano, Russell (2002). Web Content Management: A collaborative Approach, First Edition, Boston: Addison Wesley Professional [ISBN: 0-201-65782-1, 222 Pages, Paperback, Price: $39.99]

939

Web Context Classification Based on Information Quality Factors

940

Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis

941

Web Crawling Ethics Revisited: Cost, Privacy, and Denial of Service

942

Web crippling behaviour of cold-formed duplex stainless steel tubular sections at elevated temperatures

943

Web crippling behaviour of cold-formed steel channel sections with offset web holes subjected to interior-two-flange loading

944

Web crippling behaviour of pultruded glass fibre reinforced polymer sections

945

Web crippling behaviour of thin-walled lipped channel beams

946

Web crippling failure using quasi-static FE models

947

Web crippling of aluminium tubes with perforated webs

948

Web crippling of aluminium tubular structural members strengthened by CFRP

949

Web crippling of cold-formed steel beams at end supports

950

Web crippling of cold-formed unlipped channels with flanges restrained

951

WEB CRIPPLING OF UN-STIFFENED COLD-FORMED CHANNELS WITH CIRCULAR WEB OPENINGS

952

Web damage and feeding experience influence web site tenacity in the orb-web spider Argiope keyserlingi Karsch

953

Web Data Amalgamation for Security Engineering: Digital Forensic Investigation of Open Source Cloud

954

Web data as academic and business quality estimates: A comparison of three data sources

955

Web design of box girders concrete bridges

956

Web developers continue to focus on interoperability

957

Web developments and the Internet

958

Web Discovery and Filtering Based on Textual Relevance Feedback Learning

959

Web document clustering using hyperlink structures

960

Web Domains Ranking with Real User Traffic Based on the Big Data Platform

961

962

Web dynamics and their ramifications for the development of Web search engines

963

Web eases organ donations worldwide

964

Web Enabled Based Face Recognition Using Partitioned Iterated Function System

965

Web enabled expert systems using hyperlink-based inference

966

Web gears up for people with disabilities

967

Web health fraud monitors face formidable task

968

Web hosting with statistical capacity guarantee

969

Web image retrieval using self-organizing feature map

970

Web Impact Factors for Australasian universities

971

Web in the palm of your hand

972

Web Inspection Using Gradient-Indexed Optics

973

Web interface for plasma analysis codes

974

Web Issue Analysis: An Integrated Water Resource Management Case Study

975

WEB JOURNAL ON CULTURAL PATRIMONY

976

Web links and gender in science: An exploratory analysis

977

Web Links and Search Engine Ranking: The Case of Google and the Query “Jew”

978

Web log data warehousing and mining for intelligent web caching

979

Web machine coordinated motion control via electronic line-shafting

980

Web mining and privacy concerns: Some important legal issues to be consider before applying any data and information extraction technique in web-based environments

981

Web mining based extraction of problem solution ideas

982

Web mining based on Growing Hierarchical Self-Organizing Maps: Analysis of a real citizen web portal

983

Web mining for event-based commonsense knowledge using lexico-syntactic pattern matching and semantic role labeling

984

Web mining for Web image retrieval

985

Web Mining Functions in an Academic Search Application

986

Web Mining in Soft Computing Relevance and Future Directions

987

Web Mining Using PageRank Algorithm.

988

Web mining with relational clustering Original Research Article

989

Web mining: a survey in the fuzzy framework

990

Web Mining: An Overview

991

Web Modeling Language (WebML): a modeling language for designing Web sites

992

Web Modules and Applications Original Research Article

993

WEB NAVIGATION BEHAVIOUR OF MALAYSIANS IN RELATION TO ONLINE PURCHASING

994

Web Navigation Support by Means of Proximity-Driven Assistant Agents

995

Web networks of the science system: Weighted hubs and authorities

996

Web objectionable text content detection using topic modeling technique

997

Web of deception: misinformation on the internet: edited by Anne P. Mintz. Medford, NJ: Information Today, 2002. 275p. $24.95 (paperbound). ISBN 0-910965-60-9

998

Web of Science with the Conference Proceedings Citation Indexes: the case of computer science

999

Web opens window on mental illness art

1000

Web page change and persistence—A four-year longitudinal study

بازگشت