بر اساس عنوان

1
Mechanical Alloying and Spark Plasma Sintering of Equiatomic AlCoCrFeMnNi High Entropy Alloy
2
Mechanical Alloying and Thermal Decomposition of (ZrO2)0.8-(ALPHA-Fe2O3)0.2 Powder for Gas Sensing Applications
3
Mechanical alloying and thermal stability of Al67Ti25M8 (M=Cr, Zr, Cu)
4
Mechanical alloying and thermal stability of Al67Ti25M8 (M=Cr, Zr, Cu)
5
Mechanical alloying behavior of Ti6Al4V residual scraps with addition of Al2O3 to produce nanostructured powder
6
Mechanical alloying for the effective dispersion of sub-micron SiCp reinforcements in Al–Li alloy composite
7
Mechanical alloying for the effective dispersion of sub-micron SiCp reinforcements in Al–Li alloy composite
8
Mechanical alloying in the Fe–Cu system
9
Mechanical alloying in the Fe–Cu system
10
Mechanical alloying of Al70Pd20Mn10 elemental powder mixture
11
Mechanical alloying of Al70Pd20Mn10 elemental powder mixture
12
Mechanical alloying of Al–Cu–Fe elemental powders
13
Mechanical alloying of Al–Cu–Fe elemental powders
14
Mechanical alloying of alumina–yttria powder mixtures
15
Mechanical alloying of BiSb semiconducting alloys
16
Mechanical alloying of BiSb semiconducting alloys
17
Mechanical alloying of carbon nanotube and Al6061 powder for metal matrix composites
18
Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite
19
Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite Original Research Article
20
Mechanical alloying of Fe100−x−yNbxBy (x = 5, 10; y = 10, 15): From pure powder mixture to amorphous phase
21
Mechanical alloying of Fe–B powders
22
Mechanical alloying of Fe–B powders
23
Mechanical alloying of Fe–Mn and Fe–Mn–Si
24
Mechanical alloying of Fe–Mn and Fe–Mn–Si
25
Mechanical alloying of highly processable glassy alloys
26
Mechanical alloying of highly processable glassy alloys
27
Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals
28
Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals
29
Mechanical alloying of La55Al25Cu10Ni5Co5 glass-forming alloy with refractory metals
30
Mechanical alloying of lanthana-bearing nanostructured ferritic steels Original Research Article
31
Mechanical alloying of MoSi2 with ternary alloying elements. Part 2 computer simulation
32
Mechanical alloying of MoSi2 with ternary alloying elements. Part 2 computer simulation
33
Mechanical alloying of MoSi2 with ternary alloying elements.: Part 1: Experimental
34
Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites Original Research Article
35
Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder
36
Mechanical alloying of refractory metal–silicon systems
37
Mechanical alloying of Sm and Fe mixtures having the molar ratio of 1/2 and 1/3
38
Mechanical alloying of the NiAl(M) (MTi,Fe) system
39
Mechanical alloying of the NiAl(M) (MTi,Fe) system
40
Mechanical alloying of the Ti-Al system in atmosphere of hydrogen and argon
41
Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation
42
Mechanical alloying of TiC/M2 high speed steel composite powders and sintering investigation
43
Mechanical alloying of titanium
44
Mechanical alloying preparation of fullerene-like Co3C nanoparticles with high hydrogen storage ability
45
Mechanical alloying process of vanadium powder with 1.7 wt.%Y addition
46
Mechanical alloying processing and rapid plasma activated sintering consolidation of nanocrystalline iron-aluminides
47
Mechanical alloying processing and rapid plasma activated sintering consolidation of nanocrystalline iron-aluminides
48
Mechanical alloying, nitrogen storage and magnetization of Ca–Co powder
49
Mechanical alloying, sintering and characterization of Al2O3–20 wt%–Cu nanocomposite
50
Mechanical amorphization of Fe75Nb10B15 powder: Microstructural and magnetic characterization
51
Mechanical amplification mechanism of kinesin’s -domain
52
Mechanical analyses of hooked fiber pullout performance in ultra-high-performance concrete
53
Mechanical analyses of morphological and topological transformation of liposomes
54
Mechanical analysis and design of casing in directional well under in-situ stresses
55
Mechanical analysis and toughening mechanisms of a multiphase recycled CFRP
56
Mechanical analysis of 3D braided composites: a finite element model
57
Mechanical analysis of a cracked beam reinforced with an external FRP plate
58
Mechanical analysis of a functionally graded cylinder-piston under internal pressure due to a combustion engine using a cylindrical super element and considering thermal loading
59
Mechanical analysis of a mixed mode debonding test for “composite” pavements
60
Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine
61
Mechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine
62
Mechanical analysis of edge bending mode for four-roll plate bending process
63
Mechanical analysis of explanted saline-filled breast implants exposed to betadine pocket irrigation
64
Mechanical analysis of eyelid morphology
65
Mechanical analysis of fault slip data: Implications for paleostress analysis
66
Mechanical analysis of fuel fretting problem
67
Mechanical analysis of fuel fretting problem
68
Mechanical analysis of fuel fretting problem Original Research Article
69
Mechanical analysis of graphene-based woven nano-fabric
70
Mechanical analysis of hollow fiber membrane integrity in water reuse applications Original Research Article
71
Mechanical analysis of maxillofacial miniplates
72
Mechanical analysis of percutaneous sacroplasty using CT image based finite element models
73
Mechanical analysis of reinforced concrete box beam strengthened with carbon fiber sheets under combined actions
74
Mechanical analysis of second order helical structure in electrical cable
75
Mechanical analysis of the blistering of a thin film deposited on a glassy polymer
76
Mechanical analysis of the crystalline–amorphous laminated composite based on a two-phase model
77
Mechanical analysis of the EC upper launcher with respect to electromagnetic loads
78
Mechanical analysis of the geometry of forced-folds
79
Mechanical analysis of the joint between Wendelstein 7-X target elements and the divertor frame structure
80
Mechanical analysis of the PF1 feeder for ITER
81
Mechanical analysis of the scratch test on elastic and perfectly plastic materials with the three-dimensional finite element modeling
82
Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains
83
Mechanical Analysis of the Three-dimensional Deformation Shape Ratio of Spacer Knitted Fabrics under Uniaxial Tension
84
Mechanical analysis of toughness degradation due to premature fracture of course inclusions in wrought aluminium alloys
85
Mechanical analysis of toughness degradation due to premature fracture of course inclusions in wrought aluminium alloys
86
Mechanical analysis of tubing string in well testing operation
87
MECHANICAL ANALYSIS OF WEARABLE LOWER LIMB EXOSKELETON FOR REHABILITATION
88
Mechanical analysis using the unconfined penetration test on the tensile strength of Q3 loess around Lanzhou City, China
89
Mechanical anchorage of FRP tendons – A literature review
90
Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler Original Research Article
91
Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials
92
Mechanical and acid-etching properties of Bi2O3–ZnO–B2O3 glass-containing ceramic fillers
93
Mechanical and acoustic evaluation of potato chip crispness using a versatile texture analyzer Original Research Article
94
Mechanical and acoustic response of an underwater structure subjected to mechanical excitation
95
Mechanical and acoustical characteristics of bound rubber granulate
96
Mechanical and acoustical properties as a function of PEG concentration in macroporous silica gels
97
Mechanical and acoustical study of a structural bond: comparison theory/numerical simulations/experiment
98
Mechanical and adhesion properties of Al/AlN multilayered thin films
99
Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets
100
Mechanical and anisotropic behaviors of Mg–Li–Zn alloy thin sheets
101
Mechanical and Antibacterial Properties of Paper Coated with Chitosan
102
Mechanical and antibacterial properties of recycled carton paper coated by PS/Ag nanocomposites for packaging
103
Mechanical and barrier properties of epoxy polymer filled with nanolayered silicate clay particles
104
Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes Original Research Article
105
Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy
106
Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films
107
Mechanical and barrier properties of sodium caseinate–anhydrous milk fat edible films
108
Mechanical and Bioactive Properties of a Commercial Glass Carbomer: GCP Glass Fill
109
Mechanical and biochemical characterization of cartilage explants in serum-free culture
110
Mechanical and biochemical properties of human cervical tissue
111
Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys
112
Mechanical and biodegradable properties of porous titanium filled with poly-L-lactic acid by modified in situ polymerization technique
113
Mechanical and biological characterization of resin-modified glass-ionomer cement containing doxycycline hyclate
114
Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid)
115
Mechanical and biological properties of oxidized horn keratin
116
Mechanical and biological stability of superplastically embedded HA nanolayer deformed at high temperature
117
Mechanical and biomechanical measurements of five currently available osteosynthesis systems of self-tapping screws
118
Mechanical and biomedical properties of hydroxyapatite-based gradient coating on α-Al2O3 ceramic substrate
119
Mechanical and biotribological properties of ceramic–metal composites (TiC/Ti–15Mo and SiC/Ti–15Mo) for joint prostheses and the effects of additive metallic elements of W, Nb, and Ir
120
Mechanical and bond properties of coconut shell concrete
121
Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V
122
Mechanical and chemical behavior of spruce wood modified by heat
123
Mechanical and chemical characteristics of hermetically coated silica optical fibre
124
Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment
125
Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatings
126
Mechanical and chemical control of red rice (Oryza sativa L. var. sylvatica) in rice (Oryza sativa L.) pre-planting
127
Mechanical and chemical investigation of the temperature influence on the tribological mechanisms occurring in OMC/cast iron friction contact
128
Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy
129
Mechanical and chemical properties of PBIID-treated plastics
130
MECHANICAL AND CHEMICAL PROPERTIES OF SiO2-Al2O3-CaO-MgO (R2O) GLASS CERAMICS IN THE PRESENCE OF VARIOUS NUCLEATING AGENTS
131
Mechanical and clinical predictors of J-wire fracture and injury in permanent atrial pacemaker lead: Implications for management
132
Mechanical and compositional characteristics of steam-treated Douglas fir (Pseudotsuga menziesii L.) during pelletization
133
Mechanical and corrosion behavior of plain low carbon dual-phase steels Pages 433-440
134
Mechanical and corrosion behaviour of as-cast and annealed Zr60Cu20Al10Fe5Ti5 bulk metallic glass
135
Mechanical and corrosion behaviour of EUROFER 97 steel exposed to Pb–17Li
136
Mechanical and corrosion properties of (Ti,Si)N coating synthesized by cathodic arc plasma evaporation
137
Mechanical and Corrosion Properties of AZ31 Magnesium Alloy Repeatedly Recycled by Hot Extrusion
138
Mechanical and corrosion properties of binary Mg–Dy alloys for medical applications
139
Mechanical and corrosion properties of dc magnetron sputtered Al/Cr multilayers
140
Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
141
Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy
142
Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy
143
Mechanical and corrosion properties of rheocast and low-pressure cast A356-T6 alloy
144
Mechanical and corrosion properties of Ti–6Al–4V alloy joints brazed with a low-melting-point 62.7Zr–11.0Ti–13.2Cu–9.8Ni–3.3Be amorphous filler metal
145
Mechanical and corrosion resistance of a new nanostructured Ti–Zr–Ta–Nb alloy
146
Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films
147
Mechanical and corrosion resistant properties of martensitic stainless steel plasma nitrocarburized with rare earths addition
148
Mechanical and corrosion study of diamond-like carbon coating on NiTi alloys
149
Mechanical and corrosion-resistance performance of electrodeposited titania–nickel nanocomposite coatings
150
Mechanical and corrosion-resistant properties of Ti–Nb–Si–N nanocomposite films prepared by a double glow discharge plasma technique
151
Mechanical and cropping behavior of direct drilled soil under different traffic intensities: effect on soybean (Glycine max L.) yields
152
MECHANICAL AND CULTURAL CONTROL METHODS FOR LAND SNAIL Monacha cartusiana (Müller) INHABITING SOME ORCHARDS AT SHARKIA GOVERNORATE
153
Mechanical and Damping Properties of Fullerene-Dispersed AZ91 Magnesium Alloy Composites Processed by a Powder Metallurgy Route
154
Mechanical and damping properties of thermal treated Mg–Zn–Y–Zr alloys reinforced with quasicrystal phase
155
Mechanical and degradability properties of polyethylene/ PBL composites in a wet-dry controlled environment
156
Mechanical and dielectric investigation on point defects and phase transition in ferroelectric ceramics
157
Mechanical and dielectric properties of 2.5D SiCf/SiC–Al2O3 composites prepared via precursor infiltration and pyrolysis
158
Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive
159
Mechanical and dielectric properties of porous Si2N2O–Si3N4 in situ composites
160
Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former
161
Mechanical and dielectric properties of porous Si3N4–SiO2 composite ceramics
162
Mechanical and dielectric properties of short carbon fiber reinforced Al2O3 composites with MgO additive
163
Mechanical and dielectric properties of silicon nitride ceramics with high and hierarchical porosity
164
Mechanical and dielectric relaxation in neodymium-modified bismuth titanate ceramics
165
Mechanical and dielectric relaxation spectra in seven highly viscous glass formers
166
Mechanical and dry sliding wear characterization of epoxy–TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment
167
Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete
168
Mechanical and dry-sliding wear properties of boronized pure cobalt using boronizing powders with SiC as diluent
169
Mechanical and durability characteristics of concrete containing EAF slag as aggregate
170
Mechanical and durability characteristics of gypsum-free blended cements incorporating sulphate-rich reject fly ash
171
Mechanical and durability characteristics of marble-powder-based high-strength concrete
172
Mechanical and durability properties of cement mortar with Algerian natural pozzolana
173
Mechanical and durability properties of concrete made with dredged marine sand
174
Mechanical and durability properties of concrete using contaminated recycled aggregates
175
Mechanical and durability properties of concretes containing paper-mill residuals and fly ash
176
Mechanical and durability properties of concretes containing recycled lime powder and recycled aggregates
177
Mechanical and durability properties of high performance concretes containing supplementary cementitious materials
178
Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles
179
MECHANICAL AND DURABILITY PROPERTIES OF RECYCLED CONCRETE AGGREGATE FOR NORMAL STRENGTH STRUCTURAL CONCRETE
180
Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash
181
MECHANICAL AND DURABILITY PROPERTIES OF SLAG BASED RECYCLED AGGREGATE CONCRETE
182
Mechanical and durability properties of ternary concretes containing silica fume and low reactivity blast furnace slag
183
Mechanical and durability studies on concrete containing wollastonite–fly ash combination
184
Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres
185
Mechanical and dye adsorption properties of graphene oxide/chitosan composite fibers prepared by wet spinning
186
Mechanical and dynamic properties of coconut fibre reinforced concrete
187
Mechanical and dynamic properties of self-compacting crumb rubber modified concrete
188
Mechanical and Dynamical Properties of Structural Rubcrete Mixes
189
Mechanical and dynamic-mechanical behavior and morphology of polystyrene/perovskite composites: Effects of filler size
190
Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates
191
Mechanical and elastic properties of fine-grained polycrystalline scandia and erbia as determined by indentation techniques
192
Mechanical and elastic properties of modified thick thermal barrier coatings
193
Mechanical and elastic properties of modified thick thermal barrier coatings
194
Mechanical and Electrical Behavior of Polymer Matrix Composite and their Hybrids Reinforced with (Carbon Black–Boron) Particles
195
Mechanical and electrical characterisation of a phase transformation in thermal barrier coatings
196
Mechanical and electrical characterization of Cu-2 wt.% SWCNT nanocomposites synthesized by in situ reduction
197
Mechanical and electrical failures leading to major fires
198
Mechanical and electrical properties of a MWNT/epoxy composite
199
Mechanical and electrical properties of Al2O3/Ce0.8Y0.2O1.9 composite electrolytes
200
Mechanical and electrical properties of aligned carbon nanotube/carbon matrix composites
201
Mechanical and electrical properties of B4C–CrB2 ceramics fabricated by liquid phase sintering
202
Mechanical and electrical properties of carbon nanofibers reinforced aluminum nitride composites prepared by plasma activated sintering
203
Mechanical and electrical properties of carbon nanotube ribbons
204
Mechanical and electrical properties of cross-linked carbon nanotubes Original Research Article
205
Mechanical and electrical properties of Cu–Ta nanocomposites prepared by high-energy ball milling Original Research Article
206
Mechanical and Electrical Properties of Epoxy/ Multi-walled Carbon Nanotube/Nanoclay Nanocomposites
207
Mechanical and electrical properties of GeSb2Te4 film with external voltage applied
208
Mechanical and electrical properties of hot-pressed borosilicate glass matrix composites containing multi-wall carbon nanotubes
209
Mechanical and electrical properties of mechanically alloyed nanocrystalline Cu–Nb alloys Original Research Article
210
Mechanical and electrical properties of multi walled carbon nanotube/ABC block terpolymer composites Original Research Article
211
Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites Original Research Article
212
Mechanical and electrical properties of nanostructured ‘plastic metals’
213
Mechanical and electrical properties of novel poly(ether ether ketone)/carbon nanotube/inorganic fullerene-like WS2 hybrid nanocomposites: Experimental measurements and theoretical predictions
214
Mechanical and electrical properties of paper sheets treated with chitosan and its derivatives
215
Mechanical and electrical properties of PZT ceramics (Zr:Ti=0.40:0.60) related to Nd3+ Addition
216
Mechanical and electrical properties of PZT ceramics (Zr:Ti=0.40:0.60) related to Nd3+ Addition
217
Mechanical and electrical properties of Sc2O3-doped zirconia ceramics improved by postsintering with HIP
218
Mechanical and electrical properties of small amount of oxides reinforced PZT ceramics
219
Mechanical and electrical properties of superplastically foamed titania-based ceramics
220
Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching
221
Mechanical and electrical response of carbon nanotube-based fabric composites to Hopkinson bar loading
222
Mechanical and electrical tests on the attachment keys for the divertor vertical target
223
Mechanical and electrochemical behaviors assessments of Aluminum Graphene Oxide composites fabricated by mechanical milling and repetitive upsetting extrusion
224
Mechanical and electrochemical characterization of vanadium nitride (VN) thin films
225
Mechanical and electrochemical interactions during liquid–solid impingement on high-alloy stainless steels
226
Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel
227
Mechanical and electromagnetic induction of protection against oxidative stress
228
Mechanical and electromagnetic properties of northern Gulf of Mexico sediments with and without THF hydrates
229
Mechanical and electromagnetic shielding properties of SiCf/SiC composites fabricated by combined CVI and PIP process
230
Mechanical and electromechanical behavior of oxide coatings grown on stainless steel 304L by nanosecond pulsed laser irradiation
231
Mechanical and Electromechanical Properties of Vinylidene Fluoride Terpolymers
232
Mechanical and electronic properties of Ag3Sn intermetallic compound in lead free solders using ab initio atomistic calculation
233
Mechanical and electronic properties of C60 under structure distortion studied with density functional theory
234
Mechanical and electronic properties of carbon and boron–nitride nanotubes Original Research Article
235
Mechanical and electronic properties of carbon nanobuds: First-principles study
236
Mechanical and electronic properties of diborides of transition 3d–5d metals from first principles: Toward search of novel ultra-incompressible and superhard materials
237
Mechanical and electronic properties of endofullerene Ar@C60 and Kr@C60 studied via structure distortions
238
Mechanical and electronic properties of Rh and Rh3Zr from first-principles calculation
239
Mechanical and electrostatic properties of carbon nanotubes and nanowires
240
Mechanical and ellipsometry measurements of thin TiN layer prepared by PIII
241
Mechanical and energetical analysis of molecular dynamics simulations of dislocation–defect interactions Original Research Article
242
Mechanical and environmental effects on stress corrosion cracking of low carbon pipeline steel in a soil solution
243
Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates
244
Mechanical and erosion-resistance properties of slag α-sialon ceramics
245
Mechanical and experimental investigation on nuclear fuel fretting
246
Mechanical and experimental study on freeze proof solar powered adsorption cooling tube using active carbon/methanol working pair
247
Mechanical and failure behaviour of hybrid polymer–metal staked joints
248
Mechanical and failure properties of single attached cells under compression
249
Mechanical and fatigue performance of rubber concrete
250
Mechanical and fatigue properties of martensitic Fe-13Cr steel in contact with lead and lead-bismuth melts
251
Mechanical and fatigue strengths of silicon nitride ceramics in liquid aluminum alloys
252
Mechanical and flame-retardant properties of styrene–ethylene–butylene–styrene/carbon nanotube composites containing bisphenol A bis(diphenyl phosphate)
253
Mechanical and fracture behavior of bainitic rail steel
254
Mechanical and fracture behavior of cement-based materials characterized by combined elastic wave approaches
255
Mechanical and fracture behavior of polypropylene/poly(ethylene-co-vinyl alcohol) blends compatibilized with ionomer Na+
256
Mechanical and fracture behavior of powder metalurgy processed Ti3Al-based alloys
257
Mechanical and fracture behavior of veneer–framework composites for all-ceramic dental bridges
258
Mechanical and fracture behaviour of aluminium-based discontinuously reinforced composites at hot working temperatures
259
Mechanical and fracture mechanical characterization of building materials used for external thermal insulation composite systems
260
Mechanical and fracture properties of an AZ91 Magnesium alloy reinforced by Si and SiC particles
261
Mechanical and fracture properties of cement-based bi-materials after thermal cycling
262
Mechanical and fracture properties of ternary PE/PA6/GF composites
263
Mechanical and fresh properties of fiber reinforced self-compacting lightweight concrete
264
Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash
265
Mechanical and functional assessment of the wrist affected by rheumatoid arthritis: A finite element analysis
266
Mechanical and functional properties of beef products obtained using microbial transglutaminase with treatments of pre-heating followed by cold binding
267
Mechanical and functional properties of the equine superficial digital flexor tendon
268
Mechanical and gaseous properties of coal briquettes in terms of outburst risk
269
Mechanical and gelling properties of comminuted sausages containing chicken MDM Original Research Article
270
Mechanical and geometric changes in the growing femora of BMP-5 deficient mice
271
Mechanical and histological characterization of the abdominal muscle. A previous step to modelling hernia surgery
272
Mechanical and histological evaluation of a plasma sprayed hydroxyapatite coating on a titanium bond coat
273
Mechanical and histological evaluation of a PMMA-based bone cement modified with γ-methacryloxypropyltrimethoxysilane and calcium acetate
274
Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone
275
Mechanical and hydration properties of ground granulated blastfurnace slag pastes activated with MgO–CaO mixtures
276
Mechanical and hydraulic coupling of injection-induced slip along pre-existing fracture
277
Mechanical and hydraulic properties of sludge deposit on sludge drying reed beds (SDRBs): Influence of sludge characteristics and loading rates
278
Mechanical and hydraulic resistance relations in crust-topped soils
279
Mechanical and hydric properties of alkali-activated aluminosilicate composite with electrical porcelain aggregates
280
Mechanical and in vitro biological performances of hydroxyapatite–carbon nanotube composite coatings deposited on Ti by aerosol deposition
281
Mechanical and in vitro degradation behavior of ultrafine calcium polyphosphate reinforced magnesium-alloy composites
282
Mechanical and in vitro performance of 13–93 bioactive glass scaffolds prepared by a polymer foam replication technique
283
Mechanical and in vitro testing of aerosol–gel deposited titania coatings for biocompatible applications
284
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
285
Mechanical and informational modeling of steel beam-to-column connections
286
Mechanical and interfacial characterisation of Fe3AI and Fe3Al---Al2O3 intermetallic composite made by mechanical smearing and hot isostatic pressing
287
Mechanical and interfacial evaluation of CNT/polypropylene composites and monitoring of damage using electrical resistance measurements
288
Mechanical and interfacial properties of wood and bio-based thermoplastic composite
289
Mechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil Original Research Article
290
Mechanical and leaching properties of cement solidified hospital solid waste incinerator fly ash
291
Mechanical and leakrate predictions for nuclear power plant containments in accidental conditions
292
Mechanical and leakrate predictions for nuclear power plant containments in accidental conditions Original Research Article
293
Mechanical and machining characteristics of GF/PP and GF/Polyester composites
294
Mechanical and machining properties of X38CrMoV5-1/Al2O3 metal matrix composites and components
295
Mechanical and magnetic characterisation of SiC whisker reinforced Fe–Co alloy composites
296
Mechanical and magnetic load effects in Nb3Sn cable-in-conduit conductors Original Research Article
297
Mechanical and magnetic properties of a new austenitic structural steel
298
Mechanical and magnetic properties of metal fibre networks, with and without a polymeric matrix
299
Mechanical and magnetic properties of metallic glasses
300
Mechanical and magnetic properties of γ-Ni–xFe/Al2O3 composites
301
Mechanical and magnetic resonance imaging changes following eccentric or concentric exertions
302
Mechanical and magnetocaloric properties of Gd-based amorphous microwires fabricated by melt-extraction Original Research Article
303
Mechanical and metabolic functions in pig hearts after 4 days of chronic coronary stenosis
304
Mechanical and metabolic requirements for active lateral stabilization in human walking
305
Mechanical and metallurgical characterisation of electroformed nickel for helicopter erosion shield applications
306
Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6
307
Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints Original Research Article
308
Mechanical and metallurgical investigation of martensite–austenite constituents in simulated welding conditions
309
MECHANICAL AND METALLURGICAL INVESTIGATION ON GAS METAL ARC WELDING OF SUPER AUSTENITIC STAINLESS ST
310
Mechanical and metallurgical properties of friction-welded TiC particulate reinforced Ti–6Al–4V
311
Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni–20Cr and Stellite-6 coatings
312
Mechanical and metallurgical properties of pulsed neodymium-doped yttrium aluminum garnet laser welding of dual phase steels
313
Mechanical and metallurgical study of the fragmentation of end-of-life goods in a scrap shredder
314
Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy
315
Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy
316
Mechanical and microstructural analysis on the superplastic deformation behavior of Ti–6Al–4V Alloy
317
Mechanical and microstructural behaviour of CMSX-4 Ni-based superalloy joined by capacitor discharge welding
318
Mechanical and microstructural behaviour of isothermally and thermally fatigued ferritic/martensitic steels
319
Mechanical and microstructural behaviour of Y2O3 ODS EUROFER 97
320
Mechanical and microstructural characterisation of Nextel 650 alumina–zirconia fibres
321
Mechanical and microstructural characterisation of oxide films damage
322
Mechanical and microstructural characterisation of oxide films damage
323
Mechanical and microstructural characterisation of oxide films damage
324
Mechanical and microstructural characterisation of SiC- and SiBNC-fibre reinforced CMCs manufactured via PIP method before and after exposure to air
325
Mechanical and microstructural characteristics of detonation gun sprayed NiCrAlY + 0.4 wt% CeO2 coatings on superalloys
326
Mechanical and microstructural characterization of 6061 aluminum alloy strips severely deformed by Dissimilar Channel Angular Pressing
327
Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete
328
Mechanical and microstructural characterization of boron nitride nanotubes-reinforced SOFC seal glass composite
329
Mechanical and microstructural characterization of calcium aluminosilicate (CAS) and SiO2/CAS composites deformed at high temperature and high pressure
330
Mechanical and microstructural characterization of electron beam welded reduced activation oxide dispersion strengthened – Eurofer steel
331
Mechanical and microstructural characterizations of ultrafine grained Zircaloy-2 produced by room temperature rolling
332
Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes
333
Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process
334
Mechanical and Microstructural Evaluation of Recycled 7075 Aluminum Swarf
335
Mechanical and microstructural evaluations of hot formed titanium sheets by electrical resistance heating process
336
Mechanical and microstructural evolution of Hi-Nicalon Trade Mark SiC fibers annealed in O2–H2O–Ar atmospheres
337
Mechanical and microstructural integrity of nickel–titanium and stainless steel laser joined wires Original Research Article
338
Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy
339
Mechanical and microstructural investigations into the crack arrest behaviour of a modern 2¼Cr-1 Mo pressure vessel steel
340
Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure
341
Mechanical and microstructural observations during compression creep of a short fiber reinforced AlMg metal matrix composite
342
Mechanical and microstructural performance of convex dies in axisymmetric extrusion—Theory and experimental verification
343
Mechanical and microstructural properties of a hipped RAFM ODS-steel
344
Mechanical and microstructural properties of heat cured alkali-activated slag mortars
345
Mechanical and microstructural properties of HVOF sprayed WC–Co and Cr3C2–NiCr coatings on the boiler tube steels using LPG as the fuel gas
346
Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron
347
Mechanical and microstructural properties of notched E-glass/vinyl ester composite materials subjected to the environment and a sustained load
348
Mechanical and microstructural properties of notched E-glass/vinyl ester composite materials subjected to the environment and a sustained load
349
Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding
350
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
351
Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys
352
Mechanical and microstructural properties of SnAgCu solder joints
353
Mechanical and microstructural properties of soy protein – high amylose corn starch extrudates in relation to physiochemical changes of starch during extrusion Original Research Article
354
Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending Original Research Article
355
Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature
356
Mechanical and microstructure of reinforced hydroxyapatite/calcium silicate nano-composites materials
357
Mechanical and microstructure properties of chilled cast iron camshaft: Experimental and computer aided evaluation
358
Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis
359
Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process
360
Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions
361
Mechanical and moisture-dependent swelling properties of compressed Japanese cedar
362
Mechanical and morphological anisotropy in injection molding of thermotropic liquid crystalline copolyesters
363
Mechanical and morphological behavior of polyolefin blends in the presence of CaCO3
364
Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes Original Research Article
365
Mechanical and morphological evaluation of the bond–dentin interface in direct resin core build-up method
366
Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods
367
Mechanical and morphological properties of human quadriceps femoris and triceps surae muscle–tendon unit in relation to aging and running
368
Mechanical and Morphological Properties of Pineapple Peel Fibre Reinforced High Density Polyethylene
369
Mechanical and Morphological Properties of Short Nylon Fibre Reinforced NR/SBR Composites: Optimization of Interfacial Bonding Agent
370
Mechanical and muscular factors influencing the performance in maximal vertical jumping after different prestretch loads
371
Mechanical and natural durability properties of wood treated with a novel organic preservative/consolidant product
372
Mechanical and NH3 sensing properties of long multi-walled carbon nanotube ropes Original Research Article
373
Mechanical and Nondestructive Testing to Verify the Effectiveness of Composite Strengthening on Historical Cast Iron Bridge in Venice, Italy
374
Mechanical and numerical modeling of a porous elastic–viscoplastic material with tensile failure
375
Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics
376
Mechanical and numerical modelling of fluid-structure vibration instabilities of liquid propelled launch vehicle
377
Mechanical and optical characteristics of a new fiber optical system used for cardiac contraction measurement
378
Mechanical and optical characteristics of multilayer inorganic films on polyimide for anti-atomic-oxygen erosion
379
Mechanical and Optical Properties of CaCO3 Lumen-Loaded Paper: Effect of Polyethylenimine and Alum
380
Mechanical and optical properties of inverse-perovskites Sc3InX (X = B, C, N)
381
Mechanical and optical properties of ITO films with anti-reflective and anti-wear coatings
382
Mechanical and optical properties of plasma-polymerized vinyltriethoxysilane
383
Mechanical and optoelectric properties of post-annealed fluorine-doped tin oxide films by ultraviolet laser irradiation
384
Mechanical and oxidation properties of Ti–xFe–ySi alloys
385
Mechanical and oxidation properties of Ti–xFe–ySi alloys
386
Mechanical and oxidation resistance properties of 3D carbon fiber-reinforced mullite matrix composites prepared by sol–gel process
387
Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay
388
Mechanical and phase equilibria in inclusion–host systems
389
Mechanical and photocatalytic properties of hydroxyapatite/titania nanocomposites prepared by combined high gravity and hydrothermal process
390
Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites
391
Mechanical and physical behaviors of short pitch-based carbon fiber-reinforced HfB2–SiC matrix composites
392
Mechanical and physical characterization of agricultural waste reinforced polymer composites
393
Mechanical and physical properties of a cement matrix through the recycling of thermoset composites
394
Mechanical and physical properties of aluminum powder/MDF dust/polypropylene composites
395
Mechanical and physical properties of calcium silicate/alumina composite for biomedical engineering applications
396
Mechanical and physical properties of carbon–graphite fiber-reinforced polymers intended for implant suprastructures
397
Mechanical and physical properties of cement blended with sewage sludge ash
398
Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers Original Research Article
399
Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 °C
400
Mechanical and Physical Properties of Glass-Fiber Reinforced Polymer Rods Manufactured by Different Pultrusion Methods
401
Mechanical and physical properties of hydrothermally altered rocks, Taupo Volcanic Zone, New Zealand
402
Mechanical and physical properties of MWCNT/carbon composites with matrix derived from mesocarbon microbeads
403
Mechanical and Physical PROPERTIES of Partrticleboard made from 4-year-OLDLD rubberwood of RRIM 2000 series clones
404
Mechanical and physical properties of silorane and methacrylate-based composites
405
Mechanical and physical properties of silorane and methacrylate-based composites
406
Mechanical and physical properties of urea-formaldehyde bonded kenaf core particle boards
407
Mechanical and physical properties on carbon nanotube Original Research Article
408
Mechanical and physico-chemical aspects of wellbore stability during drilling operations
409
Mechanical and Physicochemical Regulation of the Action of Insulin-Like Growth Factor-I on Articular Cartilage
410
Mechanical and physico-chemical study of sulfur additives effect in milling of high strength steel
411
Mechanical and piezoresistive properties of InAs/AlGaSb cantilevers
412
Mechanical and precorroded fatigue properties of coated aluminium aircraft skin system as function of various thermal spray processes
413
Mechanical and radioactivity shielding performances of mortars made with colemanite, barite, ground basaltic pumice and ground blast furnace slag
414
Mechanical and radiographic properties of a shape memory polymer composite for intracranial aneurysm coils
415
Mechanical and rheological behavior of oil-well cement slurries produced with clinker containing carbon nanotubes
416
Mechanical and rheological properties and injectability of calcium phosphate cement containing poly (lactic-co-glycolic acid) microspheres
417
Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites
418
Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite
419
Mechanical and self-healing properties of cementitious composites reinforced with flax and cottonised flax, and compared with polyvinyl alcohol fibres
420
Mechanical and sensory testing of overfilled breast implants
421
Mechanical and shape memory properties of Ni54Mn25Ga21 high-temperature shape memory alloy
422
Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites
423
Mechanical and structural behavior of a swelling elastomer under compressive loading
424
Mechanical and structural changes of the rat cervix in late-stage pregnancy
425
Mechanical and structural characterisation of completely degradable polylactic acid/calcium phosphate glass scaffolds
426
Mechanical and structural characteristics of vulnerable plaques: analysis by coronary angioscopy and intravascular ultrasound
427
Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers Original Research Article
428
Mechanical and Structural Characterization of New Carbon FRP Stirrups for Concrete Members
429
Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated+nitrided
430
Mechanical and structural properties of bone in non-critical and critical healing in rat
431
Mechanical and structural properties of electrodeposited copper and their relation with the electrodeposition parameters
432
Mechanical and structural properties of helical and non-helical silica nanowire
433
Mechanical and structural properties of phosphate glasses
434
Mechanical and Structural Properties of Similar and Dissimilar Steel Joints
435
Mechanical and structural properties of various alloyed TiAlN-based hard coatings
436
Mechanical and structural stability of zirconium dihydride
437
Mechanical and Surface Properties of Initial and Working Aesthetic Orthodontic Archwires
438
Mechanical and swelling characterization of poly(N-isopropyl acrylamide -co- methoxy poly(ethylene glycol) methacrylate) sol–gels
439
Mechanical and swelling properties of PDMS interpenetrating polymer networks
440
Mechanical and swelling properties of thermoplastic elastomer blends
441
Mechanical and technological analysis of AISI 304 butt joints welded with capacitor discharge process
442
Mechanical and temperature dependant properties, structure and phase transitions of elastic polypropylenes
443
Mechanical and textural properties of extruded materials manufactured with AlFe and AlCeFe pillared bentonites
444
Mechanical and thermal actions of liquid curtains using hydroshield nozzles
445
Mechanical and thermal behavior of clay/epoxy nanocomposites
446
Mechanical and thermal behavior of nanoclay based polymer nanocomposites using statistical homogenization approach
447
Mechanical and thermal behavior of non-crimp glass fiber reinforced layered clay/epoxy nanocomposites
448
Mechanical and thermal behaviour of cordierite–zirconia composites
449
Mechanical and thermal behaviour of isotactic polypropylene reinforced with inorganic fullerene-like WS2 nanoparticles: Effect of filler loading and temperature
450
Mechanical and thermal buckling analysis of functionally graded plates
451
Mechanical and thermal carbonation of strontium ferrite SrFeOx
452
Mechanical and thermal characteristics of a mixed convection boundary-layer flow in a saturated porous medium
453
Mechanical and thermal characteristics of high density polyethylene–fly ash Cenospheres composites
454
Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles
455
Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
456
Mechanical and thermal decomposition of with metal halides
457
Mechanical and thermal dewatering of residual sludge Original Research Article
458
Mechanical and thermal effects of floating continents on the global mantle convection
459
Mechanical and thermal evaluation of Ultra High Performance Fiber Reinforced Concretes for engineering applications
460
Mechanical and thermal expansion behavior of hipped aluminum–TiB2 composites
461
Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC
462
Mechanical and thermal expansion behavior of laser deposited metal matrix composites of Invar and TiC
463
Mechanical and thermal expansion properties of glass fibers reinforced PEEK composites at cryogenic temperatures Original Research Article
464
Mechanical and thermal expansion properties of β-eucryptite prepared by sol–gel methods and hot pressing
465
Mechanical and thermal fatigue delamination of curved layered composites
466
Mechanical and thermal modelling of Friction Stir Welding
467
Mechanical and Thermal Performances of Rubber/Graphite Derivatives: Facile Synthesis, Characterization, and Formulation
468
Mechanical and thermal postbuckling of higher order shear deformable functionally graded plates on elastic foundations
469
Mechanical and thermal processing effects on protein integrity and peptide fingerprint of pea protein isolate
470
Mechanical and thermal properties of 2D and 3D SiC/SiC composites
471
Mechanical and thermal properties of 99% and 92% alumina at cryogenic temperatures
472
Mechanical and thermal properties of AlN–BN–SiC ceramics
473
Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) composites
474
Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles
475
Mechanical and thermal properties of bleached kraft pulp–LDPE composites: Effect of epoxy functionalized compatibilizer
476
Mechanical and thermal properties of carbon nanotube/aluminum composites consolidated by spark plasma sintering
477
Mechanical and thermal properties of carbon nanotubes Original Research Article
478
Mechanical and thermal properties of cement composite graphite for solar thermal storage materials
479
Mechanical and thermal properties of Cf/SiC composites reinforced with carbon nanotube grown in situ
480
Mechanical and thermal properties of compatibilized composites of polyethylene and esterified lignin
481
Mechanical and thermal properties of composites of cis and trans-polyisoprene blends filled with Al-powder
482
Mechanical and thermal properties of copoly(styrene/acrylonitrile) compatibilised Nylon-thermoplastic elastomer blends
483
Mechanical and thermal properties of copoly(styrene/acrylonitrile) compatibilised Nylon-thermoplastic elastomer blends
484
Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites
485
Mechanical and thermal properties of eco-friendly poly(propylene carbonate)/cellulose acetate butyrate blends
486
Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree
487
Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes
488
Mechanical and thermal properties of extruded soy protein sheets
489
Mechanical and thermal properties of fly ash/vinyl ester syntactic foams
490
Mechanical and thermal properties of gelatin films at different degrees of glutaraldehyde crosslinking
491
Mechanical and Thermal Properties of Graphene Oxide Filled Epoxy Nanocomposites
492
Mechanical and thermal properties of graphite platelet/epoxy composites
493
Mechanical and thermal properties of green lightweight engineered cementitious composites
494
Mechanical and thermal properties of hot pressed CoCrMo–porcelain composites developed for prosthetic dentistry
495
Mechanical and thermal properties of LaMgAl11O19
496
Mechanical and Thermal Properties of LENR Modified Epoxy Composite
497
Mechanical and thermal properties of lightweight concretes with vermiculite and EPS using air-entraining agent
498
Mechanical and Thermal Properties of ‎Nanocomposite Films Made of Polyvinyl ‎Alcohol/Nanofiber Cellulose and ‎Nanosilicon Dioxide using Ultrasonic ‎Method
499
Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene
500
Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin
501
Mechanical and thermal properties of novel polymerized NDGA–gelatin hydrogels
502
Mechanical and Thermal Properties of Palm-Based Polyurethane Composites Filled with Fe3O4, PANI and PANI/Fe3O4
503
Mechanical and thermal properties of perfluoroalkyl ethyl methacrylate–methyl methacrylate statistical copolymers synthesized in supercritical carbon dioxide
504
Mechanical and thermal properties of poly(arylene disulfide) derived from cyclic(4,4¢-oxybis(benzene)disulfide) via ring-opening polymerization
505
Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3
506
Mechanical and thermal properties of polymer composite based on natural fibers: Moroccan hemp fibers/polypropylene
507
MECHANICAL AND THERMAL PROPERTIES OF POLYPROPYLENE REINFORCED BY CALCINED AND UNCALCINED ZEOLITE
508
Mechanical and thermal properties of polypropylene reinforced with Alfa fiber under different chemical treatment
509
Mechanical and thermal properties of SiCf/SiC composites irradiated with neutrons at high temperatures
510
Mechanical and thermal properties of SiO2/S composite coating prepared by APCVD
511
Mechanical and thermal properties of SiO2–PMMA monoliths
512
Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites
513
Mechanical and thermal properties of soy protein films processed by casting and compression Original Research Article
514
Mechanical and thermal properties of syndiotactic polystyrene blends with poly(p-phenylene sulfide)
515
Mechanical and thermal properties of thermoplastic acetylated starch/poly(ethylene-co-vinyl alcohol) blends
516
Mechanical and thermal properties of waste water bamboo husk fiber reinforced epoxy composites
517
Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals
518
Mechanical and thermal properties of yam starch films
519
Mechanical and thermal property characterization of poly-l-lactide (PLLA) scaffold developed using pressure-controllable green foaming technology
520
Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates
521
Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates
522
Mechanical and thermal shock behavior of refractory materials for glass feeders
523
Mechanical and thermal shock properties of size graded MgO–PSZ refractory
524
MECHANICAL AND THERMAL SOURCES IN A GENERALIZED THERMOELASTIC HALF-SPACE
525
MECHANICAL AND THERMAL SOURCES IN A MICROPOLAR GENERALIZED THERMOELASTIC MEDIUM
526
Mechanical and thermal stability of mechanically induced near-surface nanostructures
527
Mechanical and thermal stability of TiN/NbN superlattice thin films
528
Mechanical and Thermal Stresses in a FGPM Hollow Cylinder Due to Non-Axisymmetric Loads
529
Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads
530
Mechanical and thermodynamic properties of infrared transparent low melting chalcogenide glass
531
Mechanical and thermodynamic properties of seven phases of SrHfO3: First-principles calculations
532
Mechanical and thermo-fluid behaviour during unrest at the Campi Flegrei caldera (Italy)
533
Mechanical and thermo-mechanical failure mechanism analysis of fiber/filler reinforced phenolic matrix composites
534
Mechanical and thermomechanical properties of a Ti50Ni25Cu25 melt spun ribbon
535
Mechanical and thermomechanical properties of commercially pure chromium and chromium alloys
536
Mechanical and thermo-physical characterization of three-directional carbon fiber composites for W-7X and ITER
537
Mechanical and thermophysical properties of carbon/carbon composites with hafnium carbide
538
Mechanical and three-body abrasive wear behaviour of PMMA/TPU blends
539
Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite
540
Mechanical and transport properties of 10 years old concretes prepared with different coarse aggregates
541
Mechanical and transport properties of low-temperature negative thermal expansion material Mn3CuN co-doped with Ge and Si Original Research Article
542
Mechanical and Transport Properties of Natural Rubber Reinforced with Piassava (Raphia Hookeri) Fibre Composites
543
Mechanical and transport properties of polymeric foams derived from 3D images
544
Mechanical and tribological aspects on a-C films deposited by lamp assisted chemical vapour deposition
545
Mechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
546
Mechanical and tribological behavior of clay–polypropylene nanocomposites
547
Mechanical and tribological behavior of HNBR modified by ion implantation, influence of aging
548
Mechanical and tribological behavior of nanostructured copper–alumina cermets obtained by Pulsed Electric Current Sintering
549
Mechanical and tribological behavior of PTFE–polyoxadiazole fiber composites. Effect of filler treatment
550
Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements
551
Mechanical and tribological behavior of W/WCN bilayers grown by pulsed vacuum arc discharge
552
Mechanical and Tribological Behaviors of Chopped Carbon/Glass Fiber Reinforced Hybrid Epoxy Composites
553
Mechanical and tribological characterisation of electrodeposited AuCuCd
554
Mechanical and tribological characterization of human tooth
555
Mechanical and tribological characterization of tetrahedral diamond-like carbon deposited by femtosecond pulsed laser deposition on pre-treated orthopaedic biomaterials
556
Mechanical and tribological investigations of sol–gel derived SiO2 optical coatings
557
Mechanical and tribological performance of Al2O3-TiO2 coatings elaborated by flame and plasma spraying
558
Mechanical and tribological performance of MoS2 co-sputtered composites
559
Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings
560
Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware
561
Mechanical and tribological properties of acrylonitrile–butadiene rubber filled with graphite and carbon black
562
Mechanical and tribological properties of Al–40Zn–Cu alloys
563
Mechanical and tribological properties of Al–Si–Mo plasma-sprayed coatings
564
Mechanical and tribological properties of AlTiN/AlCrBN multilayer films synthesized by cathodic arc evaporation
565
Mechanical and tribological properties of aluminide coating modified with yttrium
566
Mechanical and tribological properties of aluminium-base composites produced by the recycling of chips
567
Mechanical and tribological properties of calcia–magnesia–alumina–silica-based glass–ceramics prepared by in situ crystallization
568
Mechanical and tribological properties of carbon and nitrogen consecutive ion implantation into aluminium
569
Mechanical and tribological properties of carbon fabric composites filled with several nano-particulates
570
Mechanical and tribological properties of ceramic/metal composites: A review of phenomena spanning from the nanometer to the micrometer length scale
571
Mechanical and tribological properties of CNx films deposited by reactive magnetron sputtering
572
Mechanical and tribological properties of coatings sputtered from SiC target in the presence of CH4 gas
573
Mechanical and tribological properties of compositionally graded CrAlN films deposited by AC reactive magnetron sputtering
574
Mechanical and tribological properties of CrAlN-Ag self-lubricating films
575
Mechanical and tribological properties of Cr–N and Cr–SI–N coatings reactively sputter deposited
576
Mechanical and tribological properties of CrN coatings deposited by large area filtered cathodic arc
577
Mechanical and tribological properties of CrN/Ag and CrSiN/Ag nanoscale multilayers
578
Mechanical and tribological properties of CrTiCu(B,N) glassy-metal coatings deposited by reactive magnetron sputtering
579
Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel
580
Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings
581
Mechanical and tribological properties of electrospun PA 6(3)T fiber mats
582
Mechanical and tribological properties of high velocity oxy-fuel thermal sprayed nanocrystalline CrCNiCr coatings
583
Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites
584
Mechanical and tribological properties of hybrid fabric–modified polyetherimide composites
585
Mechanical and tribological properties of multicomponent Ti–B–C–N thin films with varied C contents
586
Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatings
587
Mechanical and tribological properties of multilayered TiSiN/CrN coatings synthesized by a cathodic arc deposition process
588
Mechanical and tribological properties of nanocomposite TiSiN coatings
589
Mechanical and tribological properties of nanocrystalline and nanolaminated surface coatings
590
Mechanical and tribological properties of nanostructured TiN/TiBN multilayer films
591
Mechanical and tribological properties of natural rubber reinforced with carbon blacks and Al2O3 nanoparticles
592
Mechanical and tribological properties of Nd- and Yb-SiAlON composites sintered by hot isostatic pressing
593
Mechanical and tribological properties of newly developed Tribaloy alloys
594
Mechanical and tribological properties of Ni/Al multilayers—A molecular dynamics study
595
Mechanical and tribological properties of Ni-based alloy/CeF3/graphite high temperature self-lubricating composites
596
Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD
597
Mechanical and tribological properties of PA/PPS blends
598
Mechanical and tribological properties of poly(hydroxyethyl methacrylate) hydrogels as articular cartilage substitutes
599
Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer
600
Mechanical and tribological properties of polyamide 6–polyurethane block copolymer reinforced with short glass fibers
601
Mechanical and tribological properties of polymer-derived Si/C/N sub-millimetre thick miniaturized components fabricated by direct casting
602
Mechanical and tribological properties of rubber blends composed of HNBR and in situ produced polyurethane
603
Mechanical and tribological properties of self-lubricating laminated composites with flexible design
604
Mechanical and tribological properties of short-fiber-reinforced SiC composites
605
Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor
606
Mechanical and tribological properties of sputter deposited nanostructured Cr–WS2 solid lubricant coatings
607
Mechanical and tribological properties of sputtered Mo–O–N coatings
608
Mechanical and tribological properties of sputtered Mo–Se–C coatings
609
Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique
610
Mechanical and tribological properties of TiN/Ti multilayer coating
611
Mechanical and tribological properties of titanium–aluminium–nitride films deposited by reactive close-field unbalanced magnetron sputtering
612
Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates
613
Mechanical and Tribological Properties of Walnut/Polypropylene Natural Composites
614
Mechanical and tribological response of ABS polymer matrix filled with graphite powder
615
Mechanical and Ultrastructural Properties of Eggshell in Two Egyptian Native Breeds of Chicken
616
Mechanical and unlubricated tribological properties of titanium-containing diamond-like carbon coatings
617
Mechanical and viscoelastic properties of chitin fiber reinforced poly(ε-caprolactone)
618
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
619
Mechanical and water barrier properties of agar/κ-carrageenan/konjac glucomannan ternary blend biohydrogel films
620
Mechanical and water barrier properties of starch/PVA composite films by adding nano-sized poly(methyl methacrylate-co-acrylamide) particles
621
Mechanical and water soaking properties of medium density fiberboard with wood fiber and soybean protein adhesive
622
Mechanical and water vapor barrier properties of tapioca starch/decolorized hsian-tsao leaf gum films in the presence of plasticizer
623
Mechanical and wear behavior of alloyed gray cast iron in the quenched and tempered and austempered conditions
624
Mechanical and wear behavior of quenched and tempered alloyed hypereutectic gray cast iron
625
Mechanical and wear behaviors of Al–12Si–XMg composites reinforced with in situ Mg2Si particles
626
Mechanical and wear characterization of electroless nickel-boron coatings
627
Mechanical and Wear Properties of Al-Nip Composites Produced by ARB Process
628
Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy
629
Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion
630
Mechanical anisotropy and construction of flow stress diagrams during the annealing of Zr–1% Sn alloy
631
Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets Original Research Article
632
Mechanical anisotropy and segregation in Mo5Si3 studied by EBSD
633
Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy
634
Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression
635
Mechanical anisotropy in electrodeposited nanocrystalline metal/metal composite foams
636
Mechanical anisotropy of columnar jointed basalts: An example from the Baihetan hydropower station, China
637
Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy
638
Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy
639
Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy
640
Mechanical anisotropy of shape-memory NiTi with two-dimensional networks of micro-channels Original Research Article
641
Mechanical annealing of cryorolled Zr
642
Mechanical Aortic Valve Prostheses in the Small Aortic Root: Top Hat Versus Standard CarboMedics Aortic Valve
643
Mechanical Aortic Valve Replacement in Young Women Planning on Pregnancy: Maternal and Fetal Outcomes Under Low Oral Anticoagulation, a Pilot Observational Study on a Comprehensive Pre-Operative Counseling Protocol
644
Mechanical apparatus for use in potentially explosive atmospheres formed by gases, vapours and mists
645
Mechanical Application of Lubricated Nano Porous Anodized Aluminium
646
Mechanical approach in mitigating alkali-silica reaction
647
Mechanical approach to aging and wrinkling of human facial skin based on the multistage buckling theory
648
Mechanical approach to the description of liquid–vapor interfaces at low temperatures
649
Mechanical aspects of corrosion fatigue and stress corrosion cracking
650
Mechanical aspects of crimped glass reinforced plastic (GRP) rods
651
Mechanical aspects of degree of cement bonding and implant wedge effect
652
Mechanical aspects of ferro-elastic behavior and phase composition of La0.58Sr0.4Co0.2Fe0.8O3−δ
653
Mechanical aspects of heartbeat reversal in pupae of Manduca sexta
654
Mechanical aspects of nitrile hydratase enzymatic activity. Steered molecular dynamics simulations of Pseudonocardia thermophila JCM 3095
655
Mechanical aspects of the Charpy impact test
656
Mechanical aspects of the Charpy impact test
657
Mechanical aspects of the Charpy impact test Original Research Article
658
Mechanical assessment and deformation mechanisms of aluminum foam filled stainless steel braided tubes subjected to transverse loading
659
Mechanical assessment of autogenous gas tungsten arc weldments of a super alpha-2 alloy
660
MECHANICAL ASSESSMENT OF THE HUMAN UMBILICAL VEIN FOR VASCULAR TISSUE ENGINEERING APPLICATIONS
661
Mechanical assessment of the JT-60SA TF Coils during seismic event
662
Mechanical assessment of time optimal robot motion
663
Mechanical assist strategy using the BVS 5000i for patients with heart failure
664
Mechanical Assistance for Enhancement of In Vitro Effectiveness for Hydrodynamic Thrombectomy
665
Mechanical attachment of the conductor ends in the ITER poloidal field coils
666
Mechanical attrition enhanced Ni electroplating
667
Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation
668
Mechanical behavior analysis of size-dependent micro-scaled functionally graded Timoshenko beams by strain gradient elasticity theory
669
Mechanical behavior and cell response of PCL coated α-TCP foam for cancellous-type bone replacement
670
Mechanical behavior and crack tip plasticity of a strain aging sensitive steel
671
Mechanical behavior and damage evolution in E-glass vinyl ester and carbon composites subjected to static and blast loads
672
Mechanical behavior and deformation mechanisms of Ti–2.5Cu alloy reinforced by nano-scale precipitates at 293 and 77 K
673
Mechanical behavior and deformation mechanisms of Ti–2.5Cu alloy reinforced by nano-scale precipitates at 293 and 77 K
674
Mechanical behavior and design database of packed beds for blanket designs
675
Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression
676
Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression Original Research Article
677
Mechanical behavior and electrical property of CFRC-strengthened RC beams under fatigue and monotonic loading
678
Mechanical behavior and failure mechanisms of boron carbide based three-layered laminates with weak interfaces
679
Mechanical behavior and fatigue damage of a titanium matrix composite reinforced with continuous SiC fibers
680
Mechanical behavior and fracture characterization of a monocrystalline Cu–Al–Ni subjected to thermal cycling treatments under load
681
Mechanical behavior and fracture toughness evaluation of K resin grafted with maleic anhydride compatibilized polycarbonate/K resin blends
682
Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites
683
Mechanical behavior and martensitic transformation of an Fe–Mn–Si–Al–Nb alloy
684
Mechanical behavior and microstructural analysis of alumina–titanium brazed interfaces
685
Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates Original Research Article
686
Mechanical behavior and microstructural evolution of vanadium alloys irradiated in ATR-A1
687
Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 1100
688
Mechanical behavior and microstructural variation of loess under dynamic compaction
689
Mechanical behavior and microstructure during compression of semi-solid ZK60-RE magnesium alloy at high solid content
690
Mechanical behavior and microstructure evolution during steady-state dynamic recrystallization in the austenitic steel 800H
691
Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes Original Research Article
692
Mechanical behavior and microstructure of Cu54Zr22Ti18Ni6 bulk metallic glass at elevated temperatures
693
Mechanical Behavior and Optimization of Functionally Graded Hollow Cylinder with an Elliptic Hole
694
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
695
Mechanical behavior and shape memory effect of an aged NiAl–Fe alloy
696
Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization
697
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
698
Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy
699
Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy
700
Mechanical behavior and ultrasonic non-destructive characterization of elastic properties of cordierite-based ceramics Review Article
701
Mechanical behavior and wrinkling of lined pipes
702
Mechanical behavior at different temperatures and stresses for superelastic nickel–titanium orthodontic wires having different transformation temperatures
703
Mechanical behavior characterization of high zirconia fused-cast refractories at high temperature: Influence of the cooling stage on microstructural changes
704
Mechanical behavior during different weathering tests of the polyurethane elastomers films
705
Mechanical behavior improvement of open-pore copper foams synthesized through space holder technique
706
Mechanical behavior in NiTiNb shape memory alloys with low Nb content
707
Mechanical behavior measurement of the sheep small intestine using experimental tests
708
Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN
709
Mechanical behavior modeling of thaw-weakened soil
710
Mechanical behavior of (sigma) tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study
711
Mechanical behavior of (Ti,Al)N coatings exposed to elevated temperatures and an oxidative environment
712
Mechanical behavior of 2.5D (shallow bend-joint) and 3D orthogonal quartzf/silica composites by silicasol-infiltration-sintering
713
Mechanical behavior of 2.5D (shallow straight-joint) and 3D four-directional braided SiO2f/SiO2 composites
714
Mechanical behavior of 3Al2O3·2SiO2 films under nanoindentation Original Research Article
715
Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing
716
Mechanical behavior of a bi-layer glass ionomer
717
Mechanical behavior of a bulk Cu–Ti–Zr–Ni–Si–Sn metallic glass forming nano-crystal aggregate bands during deformation in the supercooled liquid region Original Research Article
718
Mechanical behavior of a cellulose-reinforced scaffold in vascular tissue engineering
719
Mechanical behavior of a cellulose-reinforced scaffold in vascular tissue engineering
720
Mechanical behavior of a compositionally graded 300M steel
721
Mechanical Behavior of a FGM Capacitive Micro-Beam Subjected to a Heat Source
722
Mechanical behavior of a glass fiber-reinforced polymer sandwich panel with through-thickness fiber insertions
723
Mechanical behavior of a lanthanum-doped magnesium alloy at different strain rates
724
Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths
725
Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths
726
Mechanical behavior of a PP platelet-reinforced nanocomposite: Experimental characterization and two scale modeling of linear and non-linear response
727
Mechanical behavior of a single polymer chain in a non-solvent
728
Mechanical behavior of a superalloy with a rafted microstructure: In situ evaluation of the effective stresses and plastic strain rates of each phase
729
Mechanical behavior of a syntactic foam: experiments and modeling
730
Mechanical behavior of a three-dimensional truss material
731
Mechanical behavior of a volcanic ash soil (Typic Hapludand) under static and dynamic loading
732
Mechanical behavior of a volcanic ash soil (Typic Hapludand) under static and dynamic loading
733
Mechanical behavior of a wire-woven metal under compression
734
Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses
735
Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique
736
Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique
737
Mechanical behavior of alumina and alumina-feldspar based ceramics in an acetic acid (4%) environment
738
Mechanical behavior of aluminum–silicon nanocomposites: A molecular dynamics study Original Research Article
739
Mechanical behavior of amorphous alloys Original Research Article
740
Mechanical behavior of an assembly of wood–geopolymer–earth bricks
741
Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet
742
Mechanical behavior of an asymmetrically rolled and annealed 1050-O sheet
743
Mechanical Behavior of an Electrostatically-Actuated Microbeam under Mechanical Shock
744
Mechanical behavior of an osteotomized mandible with distraction orthodontic devices
745
Mechanical Behavior of an Ultrafine/Nano Grained Magnesium Alloy
746
Mechanical behavior of asphalt mix: An experimental and numerical study
747
Mechanical behavior of austenitic stainless steel weld metals with microfissures
748
Mechanical Behavior of Banana Fiber Based Hybrid Bio Composites
749
Mechanical behavior of black anodic films on 7175 aluminium alloy for space applications
750
Mechanical behavior of borides formed on borided cold work tool steel
751
Mechanical behavior of bulk ultra-fine-grained Zn–Al die-casting alloys
752
Mechanical behavior of C/SiC composites under simulated space environments
753
Mechanical behavior of carbon ceramic TVO temperature sensors
754
Mechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting Original Research Article
755
Mechanical behavior of carbon fiber reinforced polyamide composites
756
Mechanical behavior of carbon fiber reinforced polyamide composites
757
Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores
758
Mechanical behavior of cast and forged magnesium alloys and their microstructures
759
Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy
760
Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy
761
Mechanical behavior of cells in microinjection: A minimum potential energy study
762
Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores Original Research Article
763
Mechanical behavior of cement-based materials reinforced with sisal fibers
764
Mechanical Behavior of CFRP Rod Anchors under Tensile Loading
765
Mechanical behavior of coated T91 steel in contact with lead–bismuth liquid alloy at 300 °C
766
Mechanical behavior of concrete filled double skin tubular circular deep beams
767
Mechanical Behavior of Concrete, Made with Micro-Nano Air Bubbles
768
Mechanical behavior of concretes damaged by alkali-silica reaction
769
Mechanical behavior of confined self-compacting reinforced concrete circular columns under concentric axial loading
770
Mechanical behavior of cordierite and cordierite–mullite materials evaluated by indentation techniques
771
Mechanical behavior of coronary stents investigated through the finite element method
772
Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue
773
Mechanical behavior of CrMo steel with tempered martensite and ferrite–bainite–martensite microstructure
774
Mechanical behavior of Cu/TiN multilayers at ambient and elevated temperatures: Stress-assisted diffusion of Cu
775
Mechanical behavior of Cu54Ni6Zr22Ti18 bulk amorphous alloy during multi-pass warm rolling
776
Mechanical behavior of diffusion-bonded bicrystals of boron-doped Ni3Al
777
Mechanical behavior of diffusion-bonded bicrystals of boron-doped Ni3Al
778
Mechanical behavior of double-C60-end-capped poly(ethylene oxide)
779
Mechanical behavior of double-step timber joints
780
Mechanical behavior of electrospun Nylon66 fibers reinforced with pristine and treated multi-walled carbon nanotube fillers
781
Mechanical behavior of electrospun polyurethane
782
Mechanical behavior of facial prosthetic elastomers after outdoor weathering
783
Mechanical behavior of FCC single crystals at finite temperatures in the presence of point defects
784
Mechanical behavior of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glass
785
Mechanical behavior of Fe75Mo5P10C7.5B2.5 bulk-metallic glass under torsional loading
786
Mechanical behavior of ferritic grade 3Cr12 stainless steel—Part 1: Experimental investigations
787
Mechanical behavior of ferritic grade 3Cr12 stainless steel—Part 2: Yield locus and hardening laws
788
Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading
789
Mechanical Behavior of Fiber-Reinforced Polymer-Wrapped Concrete Columns—Complicating Effects
790
Mechanical behavior of fluoroelastomer considering long term ageing
791
Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses
792
Mechanical behavior of functionalized nanotubes
793
Mechanical behavior of functionally graded material plates under transverse load—Part I: Analysis
794
Mechanical behavior of functionally graded material plates under transverse load—Part II: Numerical results
795
Mechanical behavior of gallium nitride nanosheets using molecular dynamics
796
Mechanical behavior of glass reinforced with SiO2 hybrid sol–gel coatings
797
Mechanical behavior of glass/epoxy tubes under combined static loading. Part I: Experimental
798
Mechanical behavior of glass/epoxy tubes under combined static loading. Part II: Validation of FEA progressive damage model
799
Mechanical behavior of groundwater seepage in karst collapse pillars
800
Mechanical behavior of hexagonal honeycombs under low-velocity impact – theory and simulations
801
MECHANICAL BEHAVIOR OF HIGH STRENGTH CONCRETE INCORPORATING SILICA FUME AND AMORPHOUS NANO-SILICA AT DIFFERENT CEMENT CONTENTS
802
Mechanical Behavior of Hybrid Connectors for Rapid-Assembling Steel-Concrete Composite Beams
803
Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers
804
Mechanical behavior of hybrid hydrogels composed of a physical and a chemical network
805
Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects
806
Mechanical behavior of interlayer-bonded nanostructures obtained from bilayer graphene
807
Mechanical behavior of interlocking multi-stepped double scarf adhesive joints including void and disbond effects
808
Mechanical behavior of laser micro-machined bulk 6H–SiC diaphragms
809
Mechanical behavior of Li4SiO4 in a blanket typical geometry
810
Mechanical behavior of lightweight concrete steel deck
811
Mechanical behavior of lightweight thermoplastic fiber–metal laminates
812
Mechanical Behavior of Lumbar Spine Functional Units in Response to Cement Augmentation of Vertebra Body
813
Mechanical behavior of magnesium-steel particles composites with interpenetrating phases
814
Mechanical behavior of masonry assemblages manufactured with recycled-aggregate mortars
815
Mechanical behavior of metallic glass reinforced nanostructured tungsten composites synthesized by spark plasma sintering
816
Mechanical behavior of microstructure engineered multi-length-scale titanium over a wide range of strain rates Original Research Article
817
Mechanical behavior of MoSi2 and MoSi2 composites
818
Mechanical behavior of MoSi2 and MoSi2 composites
819
Mechanical behavior of nanocrystalline aluminum-zirconium
820
Mechanical behavior of nanocrystalline aluminum-zirconium
821
Mechanical behavior of nanocrystalline copper
822
Mechanical behavior of nanocrystalline metals and alloys Original Research Article
823
Mechanical behavior of nanoscale Cu/PdSi multilayers Original Research Article
824
Mechanical behavior of new lightweight concrete with fiber and ingredients
825
Mechanical behavior of nickel + aluminum powder-reinforced epoxy composites
826
Mechanical Behavior of Normal Concrete Reinforced with Kantharo Suter Fiber
827
Mechanical behavior of nylon 66 fibers under monotonic and cyclic loading
828
Mechanical behavior of PACVD TiC–amorphous carbon composite layers
829
MECHANICAL BEHAVIOR OF PARTICLE FILLED ELASTOMERS
830
MECHANICAL BEHAVIOR OF PARTICLE FILLED ELASTOMERS
831
Mechanical behavior of phenolic-based composites reinforced with multi-walled carbon nanotubes Original Research Article
832
Mechanical behavior of piassava fiber reinforced castor oil polymer mortars
833
Mechanical behavior of pistachio nut and its kernel under compression loading Original Research Article
834
Mechanical behavior of plasma sprayed functionally graded YSZ/NiCoCrAlY composite coatings
835
Mechanical behavior of polystyrene grafted carbon nanotubes/polystyrene nanocomposites
836
Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting
837
Mechanical behavior of porous magnesium/alumina composites with high strength and low density
838
Mechanical behavior of post-restored upper canine teeth: A 3D FE analysis
839
Mechanical behavior of prosthesis in Toucan beak (Ramphastos toco)
840
Mechanical Behavior of Pseudo-Semi-Interpenetrating Polymer Networks Based on Double-C60-End-Capped Poly(ethylene oxide) and Poly(methyl methacrylate)
841
Mechanical behavior of recycled polyethylene/piassava fiber composites
842
Mechanical behavior of reduced-activation and conventional martensitic steels after neutron irradiation in the range 250–450°C
843
Mechanical behavior of sandwich composite beams made of foams and functionally graded materials
844
Mechanical behavior of sandwich panels with hollow Al–Si tubes core construction
845
Mechanical behavior of sandwich panels with tetrahedral and Kagome truss cores fabricated from wires
846
Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers
847
Mechanical Behavior of Self-Compacting Reinforced Concrete Including Synthetics and Steel Fibers
848
Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Albased alloy
849
Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy Original Research Article
850
Mechanical behavior of SiCf/SiC composites with alternating PyC/SiC multilayer interphases
851
Mechanical behavior of silicon carbide fiber-reinforced strontium aluminosilicate glass–ceramic composites
852
Mechanical behavior of silicon carbide fiber-reinforced strontium aluminosilicate glass–ceramic composites
853
Mechanical behavior of stiff coating on glass under sliding contact
854
Mechanical behavior of submicron-grained γ-TiAl-based alloys at elevated temperatures
855
Mechanical Behavior of the Copper Matrix Composite Reinforced by Steel Particles
856
Mechanical behavior of the female sacroiliac joint and influence of the anterior and posterior sacroiliac ligaments under sagittal loads
857
Mechanical behavior of the ITER TF model coil ground insulation system after reactor irradiation Original Research Article
858
Mechanical behavior of the sandwich structures with carbon fiber-reinforced pyramidal lattice truss core
859
Mechanical behavior of thermo-responsive orthodontic archwires
860
Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete
861
Mechanical behavior of three nickel-titanium rotary files: A comparison of numerical simulation with bending and torsion tests
862
Mechanical behavior of Ti cold spray coatings determined by a multi-scale indentation method
863
Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part I: Experimental results
864
Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part I: Experimental results
865
Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part II: constitutive modeling
866
Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part II: constitutive modeling
867
Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel
868
Mechanical behavior of TiNi shape memory alloy under axial dynamic compression
869
Mechanical behavior of transparent nanofibrillar cellulose–chitosan nanocomposite films in dry and wet conditions
870
Mechanical behavior of tungsten preform reinforced bulk metallic glass composites
871
Mechanical Behavior of TWIP Steel in High Strain Rate Torsional Test
872
Mechanical behavior of two kinds of rubber materials
873
Mechanical behavior of two-dimensional carbon/carbon composites with interfacial carbon layers Original Research Article
874
Mechanical behavior of two-step hot-pressed ZrB2-based composites with ZrSi2
875
Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling
876
Mechanical behavior of various nanoparticle filled composites at low-velocity impact
877
Mechanical behavior of zirconia/alumina composites
878
Mechanical behavior of zirconium diboride–silicon carbide ceramics at elevated temperature in air
879
Mechanical behavior of Zr-based and Ta-based micropillars
880
Mechanical behavior of δ-phase Pu–Ga alloys. Part I: Constitutive model
881
Mechanical behavior of δ-phase Pu–Ga alloys. Part II: Model verification and application
882
Mechanical behavior of Σ tilt grain boundaries in nanoscale Cu and Al: A quasicontinuum study Original Research Article
883
Mechanical behavior on residual stress in a tungsten-copper duplex structure after cyclic heat loads for a divertor application
884
Mechanical behavior prediction of TWIP steel in plastic deformation
885
Mechanical behavior related to various bonding states in amorphous Si–C–N hard films
886
Mechanical behavior under cyclic loading of the 18R-6R high-hysteresis martensitic transformation in Cu-Zn-Al alloys with nanoprecipitates
887
Mechanical behavior under nanoindentation of a new Ni-based glassy alloy produced by melt-spinning and copper mold casting
888
Mechanical behavior, wear surface morphology, and clinical performance of UHMWPE acetabular components after 10 years of implantation
889
Mechanical behaviors of Al2O3 nanoparticles reinforced polyetheretherketone
890
Mechanical behaviors of diamond reinforced Ti-based bulk metallic glassy composites prepared by spark plasma sintering
891
Mechanical behaviors of Kevlar 49 fabric subjected to uniaxial, biaxial tension and in-plane large shear deformation
892
Mechanical behaviors of partially devitrified ti-based bulk metallic glass
893
Mechanical behaviors of polypropylene/carbon nanotube nanocomposites: The effects of loading rate and temperature
894
Mechanical behaviors of porous metals under biaxial tensile loads
895
Mechanical behaviors of quasi-ordered entangled aluminum alloy wire material
896
Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect I: Effects of variations of the fuel particle volume fractions
897
Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect II: Effects of variations of the fuel particle diameters
898
Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels Review Article
899
Mechanical behaviour and biocompatibility of poly(1-vinyl-2-pyrrolidinone)–gelatin IPN hydrogels
900
Mechanical behaviour and development of dislocation arrangements of f.c.c. single crystals fatigued at 77 K
901
Mechanical behaviour and development of dislocation arrangements of f.c.c. single crystals fatigued at 77 K
902
Mechanical behaviour and energy absorption of closed-cell aluminium foam panels in uniaxial compression
903
Mechanical behaviour and essential work of fracture of halloysite nanotubes filled polyamide 6 nanocomposites
904
Mechanical behaviour and failure mechanisms of a binary Mg6%Zn alloy reinforced with SiC particulates
905
Mechanical behaviour and failure mechanisms of a binary Mg6%Zn alloy reinforced with SiC particulates
906
Mechanical behaviour and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete
907
Mechanical behaviour and fracture mechanism of flux grown holmium orthoferrite single crystals Original Research Article
908
Mechanical behaviour and in situ observation of shear bands in ultrafine grained Pd and Pd–Ag alloys Original Research Article
909
Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling
910
Mechanical behaviour and microstructural evolution in superplastic Al–Li–Mg–Cu–Zr AA8090 Original Research Article
911
Mechanical behaviour and microstructural evolution of constrained groove pressed nickel sheets
912
Mechanical behaviour and microstructural evolution of magnesium alloy AZ31 in tension at different temperatures
913
Mechanical Behaviour and Microstructure Evolution of Superplastic Mg-8.4 wt pct Li Alloy and Effect of Grain Size and Phase Ratio on Its Elongation
914
Mechanical behaviour and non-linear analysis of short beams using softened truss and direct strut & tie models
915
Mechanical Behaviour and Split Resistance of Chestnut under Compressive Loading
916
Mechanical behaviour and structure of light-cured special tray materials
917
Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue–tension and tension–fatigue sequential strain paths
918
Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue–tension and tension–fatigue sequential strain paths
919
Mechanical behaviour and thermal and electrical properties of foam glass
920
Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles
921
Mechanical behaviour and underlying deformation mechanisms in coarse- and ultrafine-grained Zn over a wide range of strain rates
922
Mechanical behaviour at large strain of polycarbonate nanocomposites during uniaxial tensile test
923
Mechanical behaviour characterisation of silicon and effect of loading rate on pop-in: A nanoindentation study under ultra-low loads
924
Mechanical behaviour in tension of cracked glass bridged by an elastomeric ligament Original Research Article
925
Mechanical behaviour modelling of balloon-expandable stents
926
Mechanical behaviour modelling of fractured nuclear fuel pellets Original Research Article
927
Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part I: Experimental
928
Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part II: Three-dimensional modelling
929
Mechanical behaviour of a low-clay translucent whiteware
930
Mechanical behaviour of a new acrylic radiopaque iodine-containing bone cement
931
Mechanical behaviour of a silicon nitride particulate ceramic composite
932
Mechanical behaviour of a solid with many stress corrosion growing cracks
933
Mechanical behaviour of a stone masonry bridge assessed using an implicit discrete element method
934
Mechanical behaviour of a two-phase material from the behaviour of its components: Interface modelling by finite element method
935
Mechanical behaviour of agro-residue reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate), (PHBV) green composites: A comparison with traditional polypropylene composites
936
Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis
937
Mechanical behaviour of alloys containing heterogeneously distributed particles: modelling with Delaunay triangulation Original Research Article
938
Mechanical behaviour of amorphous W–Si–N sputtered films after thermal annealing at increasing temperatures
939
Mechanical behaviour of an undisturbed soil subjected to loadings: Effects of load and contact area
940
Mechanical Behaviour of Apples, and Damage during Sorting and Packaging
941
Mechanical behaviour of apricot pit under compression loading Original Research Article
942
Mechanical behaviour of brittle matrix composites: a homogenization approach
943
Mechanical behaviour of cast-in situ reinforced concrete slabs with control joints
944
Mechanical behaviour of cementitious matrix composites
945
Mechanical behaviour of cement-treated sand
946
Mechanical behaviour of ceramic oxygen ion-conducting membranes
947
Mechanical behaviour of circular and triangular glass fibres and their composites
948
Mechanical Behaviour of Cissus Quadrangularis/Basalt Fibre Reinforced Hybrid Biocomposite for Bone Implantations
949
Mechanical behaviour of composite artificial tendons and ligaments
950
Mechanical behaviour of concrete made with fine recycled concrete aggregates
951
Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load
952
Mechanical behaviour of conventional and negative Poisson’s ratio thermoplastic polyurethane foams under compressive cyclic loading
953
Mechanical behaviour of corn flour and starch–zein based materials in the glassy state: A matrix–particle interpretation
954
Mechanical behaviour of cp-magnesium with duplex hydroxyapatite and PEO coatings
955
Mechanical Behaviour of Cyclically Heated Fine Grained Rock
956
Mechanical behaviour of diamond reinforced metals
957
Mechanical behaviour of directionally solidified alumina/aluminium titanate ceramics Original Research Article
958
Mechanical behaviour of DNA molecules—Elasticity and migration
959
Mechanical behaviour of dry fabric reinforcements. 3D simulations versus biaxial tests
960
Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading
961
Mechanical behaviour of earthen materials: A comparison between earth block masonry, rammed earth and cob
962
Mechanical behaviour of endodontic restorations with multiple prefabricated posts: A finite-element approach
963
mechanical behaviour of femoral diaphyseal cortical bone using the computed tomography data: a numerical investigation
964
Mechanical behaviour of ferritic ODS steels – Temperature dependancy and anisotropy
965
Mechanical behaviour of ferrocement composites: an experimental investigation
966
Mechanical behaviour of ferrocement composites: an experimental investigation
967
Mechanical behaviour of ferroelectric films on perovskite substrate
968
Mechanical behaviour of fine grained sediments: experimental compaction and three-dimensional constitutive model
969
Mechanical behaviour of fired clay materials subjected to freeze–thaw cycles
970
Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates
971
Mechanical behaviour of granular materials used in analogue modelling: insights from grain characterisation, ring-shear tests and analogue experiments
972
Mechanical behaviour of hamstring muscles in low-back pain patients and control subjects
973
Mechanical behaviour of hard PVD multilayered coatings
974
Mechanical Behaviour of Hazelnut under Compression Loading
975
Mechanical behaviour of high nitrogen stainless steel reinforced conductor for use in pulsed high field magnets at cryogenic temperature Original Research Article
976
Mechanical behaviour of historic masonry structures strengthened by bed joints structural repointing
977
Mechanical behaviour of hollow-tube stackings: Experimental characterization and modelling of the role of their constitutive material behaviour Original Research Article
978
Mechanical behaviour of hot and warm formed microalloyed steels
979
Mechanical behaviour of iron oxide scale: Experimental and numerical study
980
Mechanical behaviour of jute and polypropylene blended needle-punched fabrics
981
Mechanical behaviour of jute and polypropylene blended needle-punched fabrics
982
Mechanical behaviour of jute cloth/wool felts hybrid laminates
983
Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity
984
Mechanical behaviour of landfill barrier systems
985
Mechanical behaviour of landfill barrier systems
986
Mechanical behaviour of lime based mortars after surface consolidation
987
Mechanical behaviour of macro-dispersed inert matrix fuels
988
Mechanical behaviour of material of thermal power plant steam superheater collector after exploitation
989
Mechanical behaviour of metallic thin films on polymeric substrates and the effect of ion beam assistance on crack propagation
990
Mechanical behaviour of metallic thin films on polymeric substrates and the effect of ion beam assistance on crack propagation Original Research Article
991
Mechanical behaviour of MgO–C refractory bricks evaluated by stress–strain curves
992
Mechanical behaviour of mullite composites reinforced with mullite fibres
993
Mechanical behaviour of mullite composites reinforced with mullite fibres
994
Mechanical behaviour of nanocrystalline iron and nickel in the quasi-static and low frequency anelastic regime
995
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil
996
Mechanical behaviour of nanoporous superalloy membranes Original Research Article
997
Mechanical behaviour of natural cow leather in tension
998
Mechanical behaviour of Nd:YAG laser welded superelastic NiTi
999
Mechanical behaviour of NiAl and Ni3Al ordered compounds entering the nano-grain size regime
1000
Mechanical behaviour of NiTi parts prepared by powder metallurgical methods