بر اساس عنوان

1
Improved and simplified liquid chromatography/atmospheric pressure chemical ionization mass spectrometry method for the analysis of underivatized free amino acids in various foods
2
Improved and simplified liquid chromatography/electrospray ionization mass spectrometry method for the analysis of underivatized glucosamine in human plasma
3
Improved and validated method for the determination of Δ9-tetrahydrocannabinol (THC), 11-hydroxy-THC and 11-nor-9-carboxy-THC in serum, and in human liver microsomal preparations using gas chromatography–mass spectrometry
4
Improved Angular Velocity Estimation Using MEMS Sensors with Applications in Miniature Inertially Stabilized Platforms
5
Improved ANN αth-order inverse TCSC controller for enhancing power system transient stability
6
Improved anomeric selectivity for the aroylation of sugars
7
Improved anorgasmia following add-on lamotrigine treatment
8
Improved Ant Colony Optimization Algorithm for Reservoir Operation
9
Improved ant colony optimization algorithms for determining project critical paths
10
IMPROVED ANTENNA ARRAY ADAPTIVE BEAMFORMING WITH LOW SIDE LOBE LEVEL USING A NOVEL ADAPTIVE INVASIVE WEED OPTIMIZATION METHOD
11
Improved Antenna Effect of Terbium(III)-Cored Dendrimer Complex and Green-Luminescent Hydrogel by Radical Copolymerization
12
Improved antibacterial activities of coumarin antibiotics bearing 5′,5′-dialkylnoviose: biological activity of RU79115
13
Improved antibacterial activity of topical gel-based on nanosponge carrier of cinnamon oil
14
Improved antibacterial behavior of titanium surface with torularhodin–polypyrrole film
15
Improved antibacterial efficacy of bacteriophage-cosmetic formulation for treatment of Staphylococcus aureus in vitro
16
Improved anticancer delivery of paclitaxel by albumin surface modification of PLGA nanoparticles
17
Improved anticancer delivery of paclitaxel by albumin surface modification of PLGA nanoparticles
18
Improved anticancer efficiency of Mitoxantrone by Curcumin loaded PLGA nanoparticles targeted with AS1411 aptamer
19
Improved anticoagulation of titanium by sequential immobilization of oligo(ethylene glycol) and 2-methacryloyloxyethyl phosphorylcholine
20
Improved antifouling of anion-exchange membrane by polydopamine coating in electrodialysis process Original Research Article
21
Improved antifouling property of zwitterionic ultrafiltration membrane composed of acrylonitrile and sulfobetaine copolymer
22
Improved Antifungal Polyene Macrolides via Engineering of the Nystatin Biosynthetic Genes in Streptomyces noursei Original Research Article
23
Improved antioxidant activity of Vitamin E through solubilization in ethanol: A model study with ground beef
24
Improved anti-oxidation properties of electrospun polyurethane nanofibers achieved by oxyfluorinated multi-walled carbon nanotubes and aluminum hydroxide
25
Improved antioxidative ability of porous carbons by boron-doping
26
Improved antioxidative ability of porous carbons by boron-doping
27
Improved anti-shudder performance of ATFs—Influence of a new friction modifier and surface chemistry
28
Improved anti-stiction coating of SU-8 molds
29
Improved Antitumoral Activity of Extracts Derived from Cultured Penicillus dumetosus
30
Improved anti-wear performance of nanostructured titanium boron nitride coatings
31
Improved AODV route recovery in mobile ad-hoc networks using a genetic algorithm
32
Improved aorto-ventricular matching in ischemic dilated cardiomyopathy patients after surgical ventricular restoration
33
Improved AOX Degradation in UV Oxidative Waste Water Treatment by Dialysis with Nanofiltration Membrane
34
Improved apparatus for solid–liquid multi-stage counter-current extraction
35
Improved apparent permeability models of gas flow in coal with Klinkenberg effect
36
Improved appetite after multi-micronutrient supplementation for six months in HIV-infected South African children
37
Improved application of assisted history matching techniques
38
Improved apportionment of ambient PM constituents to sources in Tampa, FL, with Pseudo-Deterministic Receptor Model-II Original Research Article
39
Improved approach to identify cancer-associated autoantigens
40
Improved approaches and structures of new ferrocenyl carbene complexes of chromium, tungsten, and molybdenum
41
Improved approaches to ecotoxicity testing of petroleum products
42
Improved approaches to stability criteria for neural networks with time-varying delays
43
Improved approximate common interval
44
Improved approximate formulas for the natural frequencies of simply supported Bernoulli–Euler beams with rotational restrains at the ends
45
Improved approximate methods for calculating frequency response function matrix and response of MDOF systems with viscoelastic hereditary terms
46
Improved approximation algorithm for the jump number of interval orders
47
Improved approximation algorithms for connected sensor cover
48
Improved approximation algorithms for embedding hyperedges in a cycle
49
Improved Approximation Algorithms for MAX SAT
50
Improved approximation algorithms for multilevel facility location problems
51
Improved Approximation Algorithms for Tree Alignment,
52
Improved Approximation Algorithms for Uniform Connectivity Problems
53
Improved approximation for non-preemptive single machine flow-time scheduling with an availability constraint
54
Improved approximation for the Nusselt number for hydrodynamically developed laminar flow between parallel plates
55
Improved approximation for the variance of the photon emission process in scintillation counters
56
Improved approximation for the variance of the photon emission process in scintillation counters
57
Improved approximation of Max-Cut on graphs of bounded degree
58
Improved approximation of maximum vertex cover
59
Improved approximations for max set splitting and max NAE SAT Original Research Article
60
Improved approximations for maximum independent set via approximation chains Original Research Article
61
Improved approximations for the three-loop splitting functions in QCD
62
Improved approximations for two-dimensional perpendicular magnetic recording heads
63
Improved approximations of Fourier coefficients for computing periodic structures with arbitrary stiffness distribution
64
Improved approximations to scaling relationships for species, populations, and ecosystems across latitudinal and elevational gradients
65
Improved arachidonic acids production from the fungus Mortierella alpina by glutamate supplementation
66
IMPROVED ARITHMETIC OPTIMIZATION ALGORITHM FOR STRUCTURAL OPTIMIZATION WITH FREQUENCY CONSTRAINTS
67
Improved Artificial Bee Algorithm for Reliability-based Optimization of Truss Structures
68
Improved ASL based Gesture Recognition using HMM for System Application.
69
Improved assay for catechol-O-methyltransferase activity utilizing norepinephrine as an enzymatic substrate and reversed-phase high-performance liquid chromatography with fluorescence detection
70
Improved assay for determination of busulfan by liquid chromatography using postcolumn photolysis
71
Improved assay for R(−)-apomorphine with application to clinical pharmacokinetic studies in Parkinsonʹs disease
72
Improved assay method for the determination of pyronaridine in plasma and whole blood by high-performance liquid chromatography for application to clinical pharmacokinetic studies
73
Improved assessment of biodegradation extent and prediction of petroleum quality
74
Improved assessment of body cell mass by segmental bioimpedance analysis in malnourished subjects and acromegaly
75
Improved assessment of mass concrete dams using acoustic travel time tomography. Part I — theory
76
Improved assessment of mass concrete dams using acoustic travel time tomography. Part II — application
77
Improved assessment of mitral valve stenosis by volumetric real-time three-dimensional echocardiography
78
Improved assessment of pyrogenic carbon quantity and quality in environmental samples by high-performance liquid chromatography
79
Improved assignment with ant colony optimization for multi-target tracking
80
Improved astaxanthin production by Xanthophyllomyces dendrorhous growing on enzymatic wood hydrolysates containing glucose and cellobiose
81
Improved Astrometry and Photometry for the Luyten Catalog. I. Bright Stars
82
Improved Astrometry and Photometry for the Luyten Catalog. II. Faint Stars and the Revised Catalog
83
Improved asymmetric syntheses of (R)-(−)-homocitrate and (2R,3S)-(−)-homoisocitrate, intermediates in the α-aminoadipate pathway of fungi
84
Improved asymmetric synthesis of dopamine D1 full agonist, dihydrexidine, employing chiral ligand-controlled asymmetric conjugate addition of aryllithium to a nitroalkene
85
Improved asymmetrical half-bridge converter using a tapped output inductor filter
86
Improved asymptotic stability criteria for neural networks with interval time-varying delay
87
Improved asymptotics for zeros of kernel estimates via a reformulation of the Leadbetter-Cryer integral
88
Improved Atrial Function in Bicaval Versus Standard Orthotopic Techniques in Cardiac Transplantation
89
Improved Atrial Mechanical Efficiency During Alternate- and Multiple-Site Atrial Pacing Compared With Conventional Right Atrial Appendage Pacing: Implications for Selective Site Pacing to Prevent Atrial Fibrillation
90
Improved attachment of mesenchymal stem cells on super-hydrophobic TiO2 nanotubes
91
Improved attribute acceptance sampling plans based on maxima nomination sampling
92
Improved attribute acceptance sampling plans in the presence of misclassification error
93
Improved audio coding using a psychoacoustic model based on a cochlear filter bank
94
Improved auditory spatial sensitivity in near-sighted subjects
95
Improved authenticated multiple-key agreement protocol
96
Improved Auto Detection of Calcification in Digital Mammogram Relying on Multi-Stage CAD Technique
97
Improved automated monitoring and new analysis algorithm for circadian phototaxis rhythms in Chlamydomonas
98
Improved Automatic Clustering Using a Multi-Objective Evolutionary Algorithm with New Validity Measure and Application to Credit Scoring
99
Improved automatic speech recognition through speaker normalization
100
Improved automatic tuning of PID controller for stable processes
101
Improved azo dye decolorization in a modified sleeve-type bioelectrochemical system
102
Improved azo dye decolorization in an advanced integrated system of bioelectrochemical module with surrounding electrode deployment and anaerobic sludge reactor
103
Improved b quark jet identification at the D0 experiment
104
Improved b quark jet identification at the D0 experiment
105
Improved B→πlνl form factors from the lattice
106
Improved B0 field map estimation for high field EPI
107
Improved background compensation in atomic absorption spectrometry using the high speed self reversal method
108
Improved background-fitting algorithms for ionization edges in electron energy-loss spectra
109
Improved background-fitting algorithms for ionization edges in electron energy-loss spectra
110
Improved balancing heuristics for optimizing shortest path routing
111
Improved BALB/c mice granulosa cell functions using purified alginate scaffold
112
Improved ball crater micro-abrasion test based on a ball on three disk configuration
113
Improved band parameters for a simplified wide band cumulative absorption coefficient distribution model for H2O and CO2
114
Improved Bandelet with heuristic evolutionary optimization for image compression
115
Improved Bandelet with heuristic evolutionary optimization for image compression
116
Improved Bandwidth Approximation for Trees and Chordal Graphs
117
Improved bandwidth in VCSEL with AC Modulated Holding Beam
118
Improved barrier and mechanical properties of novel hydroxypropyl methylcellulose edible films with chitosan/tripolyphosphate nanoparticles Original Research Article
119
Improved barrier properties of poly(lactic acid) with randomly dispersed graphene oxide nanosheets
120
IMPROVED BAT ALGORITHM FOR OPTIMUM DESIGN OF LARGE-SCALE TRUSS STRUCTURES
121
Improved batch fuzzy learning vector quantization for image compression
122
Improved Bayesian image denoising based on wavelets with applications to electron microscopy
123
Improved BCS-type pairing for the relativistic mean-field theory
124
Improved beam finite element for the stability analysis of slender transversely cracked beam-columns
125
Improved bed use with creation of a short-stay unit in a cardiac catheterization recovery room
126
Improved Behaviour of Accordion Metallic Dampers Affected by the Increasing Number of Layers
127
Improved bending analysis of sandwich plates using a zig-zag function
128
Improved best estimate plus uncertainty methodology, including advanced validation concepts, to license evolving nuclear reactors
129
Improved biased estimation in an ANOVA model Original Research Article
130
Improved biclustering of microarray data demonstrated through systematic performance tests
131
IMPROVED BIG BANG-BIG CRUNCH ALGORITHM FOR OPTIMAL DIMENSIONAL DESIGN OF STRUCTURAL WALLS SYSTEM
132
Improved Bilinear Balanced Truncation for Order Reduction of the High-Order Bilinear System Based on Linear Matrix Inequalities
133
Improved binary four point subdivision scheme and new corner cutting scheme
134
Improved binary parameters using GA for multi-component aromatic extraction: NRTL model without and with closure equations
135
Improved binary particle swarm optimization using catfish effect for feature selection
136
Improved binary rate multiplier
137
Improved binding between copper and carbon nanotubes in a composite using oxygen-containing functional groups Original Research Article
138
Improved bioavailability and biodegradation of a model polyaromatic hydrocarbon by a biosurfactant producing bacterium of marine origin Original Research Article
139
Improved bioavailability of vitamin D3 using a β-lactoglobulin-based coagulum
140
Improved bioavailability through floating microspheres of lovastatin
141
Improved biocatalysts based on Bacillus circulans β-galactosidase immobilized onto epoxy-activated acrylic supports: Applications in whey processing
142
Improved bio-catalytic conversion by novel immobilization process using cryogel beads to increase solvent production
143
Improved biochemical characteristics of crosslinked β-glucosidase on nanoporous silica foams
144
Improved Biochemical Parameters in Patients Who Undergo Early Resection in Isolated Ileocaecal Crohn’s Disease
145
Improved biochemical strategies for targeted delivery of taxoids Review Article
146
Improved biocompatibility and antifouling property of polypropylene non-woven fabric membrane by surface grafting zwitterionic polymer
147
Improved biocompatibility of a viscous bioerodible poly(ortho ester) by controlling the environmental pH during degradation
148
Improved biocompatibility of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer by a surface graft polymerization of hyaluronic acid
149
Improved biocompatibility of small intestinal submucosa (SIS) following conditioning by human endothelial cells
150
Improved bioconversion of poplar by synergistic treatments with white-rot fungus Trametes velutina D10149 pretreatment and alkaline fractionation
151
Improved biodegradation of Congored by using Bacillus sp.
152
Improved bio-energy yields via sequential ethanol fermentation and biogas digestion of steam exploded oat straw
153
Improved biogas production from whole stillage by co-digestion with cattle manure
154
Improved biohydrogen production with an expression of codon-optimized hemH and lba genes in the chloroplast of Chlamydomonas reinhardtii
155
Improved Biological Impacts of Anti-EGFR Monoclonal Antibody in KRAS-Mutant Colorectal Cancer Cells by Silica-Coated Magnetic Nanoparticle Conjugation
156
Improved biological performance of low modulus Ti–24Nb–4Zr–7.9Sn implants due to surface modification by anodic oxidation
157
Improved biological performance of Ti implants due to surface modification by micro-arc oxidation
158
Improved biomass and lipid production in a mixotrophic culture of Chlorella sp. KR-1 with addition of coal-fired flue-gas
159
Improved biomass distribution using pulsed injections of electron donor and acceptor
160
Improved biosorption potential of Thuja orientalis cone powder for the biosorptive removal of Basic Blue 9
161
Improved biotransformations on charged PEGA supports
162
Improved Biquad Structures Using Double-Output Transconductance Blocks for Tunable Continuous-Time Filters
163
Improved bivariate Bonferroni-type inequalities
164
Improved blending of the lid/cheek with modified Gore-Tex knotted cable suspension suture systems
165
Improved blood compatibility of polyethersulfone membrane with a hydrophilic and anionic surface
166
Improved blood compatibility of rapamycin-eluting stent by incorporating curcumin
167
Improved blood pressure control in hypertensive and hypercholesterolemic patients treated with HMG-CoA reductase inhibitors
168
Improved blood pressure control using a physician-supervised nurse-managed clinic (MDRNC) and home blood pressure measurement
169
Improved blowup results for the Euler and Euler–Poisson equations with repulsive forces
170
Improved bonding of zirconia substructures to resin using a “glaze-on” technique
171
Improved bonding of zirconia substructures to resin using a “glaze-on” technique
172
Improved bonding strength of bioactive cermet Cold Gas Spray coatings
173
Improved bone anchorage of hydroxyapatite coated implants compared with tricalcium-phosphate coated implants in trabecular bone in dogs
174
Improved bone-forming functionality on diameter-controlled TiO2 nanotube surface
175
Improved Bonferroni Inequalities and Binomially Bounded Functions
176
Improved Bonferroni Inequalities via Union-Closed Set Systems
177
Improved book-embeddings of incomplete hypercubes Original Research Article
178
Improved bottleneck domination algorithms Original Research Article
179
Improved bound for rank revealing LU factorizations
180
Improved bound for the Carathéodory rank of the bases of a matroid
181
Improved bound on facial parity edge coloring
182
Improved boundary conditions for the decay of low lying metastable proton states in a time-dependent approach Original Research Article
183
Improved boundary conditions for the direct numerical simulation of turbulent subsonic flows. I. Inviscid flows
184
Improved boundary conditions for viscous, reacting, compressible flows
185
Improved bounds for a condition number for Markov chains Original Research Article
186
Improved bounds for acyclic chromatic index of planar graphs
187
Improved bounds for asymmetric communication protocols
188
Improved bounds for dictionary look-up with one error
189
Improved bounds for Erdősʼ Matching Conjecture
190
Improved bounds for group testing designs
191
Improved bounds for Kirchhoff index of graphs
192
Improved bounds for performability evaluation algorithms using state generation
193
Improved bounds for some nonstandard problems in generalized heat conduction
194
Improved bounds for spanning trees with many leaves
195
Improved bounds for the largest eigenvalue of trees Original Research Article
196
Improved bounds for the large-time behaviour of simulated annealing
197
Improved bounds for the rate loss of multiresolution source codes
198
Improved bounds for the slope and curvature of B → D(∗)ℓν form factors
199
Improved bounds for the spectral norms of -circulant matrices with -Fibonacci and -Lucasnumbers
200
Improved bounds for the unsplittable flow problem
201
Improved bounds in the metric cotype inequality for Banach spaces
202
Improved Bounds in the Multiple-Recursive Matrix Method for Pseudorandom Number and Vector Generation
203
Improved bounds on acyclic edge colouring
204
Improved bounds on acyclic edge colouring
205
Improved bounds on coloring of graphs
206
Improved bounds on identifying codes in binary Hamming spaces
207
Improved bounds on SUSY accompanied neutrinoless double beta decay
208
Improved bounds on the chromatic numbers of the square of Kneser graphs
209
Improved bounds on the difference between the Szeged index and the Wiener index of graphs
210
Improved bounds on the electromagnetic dipole moments of the tau lepton
211
Improved bounds on the randomized and quantum complexity of initial-value problems
212
Improved bounds on the set
213
Improved Boussinesq-type equations for highly variable depth
214
Improved bow shock model with dependence on the IMF strength
215
Improved Bowel Preparation with Multimedia Education in a Predominantly African-American Population: A Randomized Study
216
Improved braking torque generation capacity of an eddy current brake with time varying magnetic fields: A numerical study
217
Improved Breadth and Potency of an HIV-1-Neutralizing Human Single-chain Antibody by Random Mutagenesis and Sequential Antigen Panning
218
Improved breast cancer survival among hormone replacement therapy users is durable after 5 years of additional follow-up
219
Improved bridge evaluation through finite element model updating using static and dynamic measurements
220
Improved brine recycling during nitrate removal using ion exchange
221
Improved broadband solar irradiance from the multi-filter rotating shadowband radiometer
222
Improved bruchid management through favorable host plant traits and natural enemies
223
Improved Buehler limits based on refined designated statistics
224
Improved bulk-heterojunction polymer solar cell performance through optimization of the linker groupin donor–acceptor conjugated polymer
225
Improved business performance through inherent safety, health and environmental design and operation: a report of a London conference
226
Improved cable compensation technique for self powered neutron detectors
227
Improved cable compensation technique for self powered neutron detectors
228
Improved calcined clay with a spherical layered structure and its characteristics as a medium for plant growth
229
Improved calculation of band gap of Sr2Bi2O5 crystal using modified Becke–Johnson exchange potential Original Research Article
230
Improved calculation of F2 in electroproduction and xF3 in neutrino scattering to NNLO and determination of αs Original Research Article
231
Improved calculation of finite-element analysis of bipolar corona including ion diffusion
232
Improved calculation of vibrational mode lifetimes in anharmonic solids – Part II: Numerical results
233
Improved calculation of vibrational mode lifetimes in anharmonic solids – Part III: Extension to fourth moment
234
Improved calculation of vibrational mode lifetimes in anharmonic solids—Part I: Theory
235
Improved calculations for no-load transformer switching surges
236
Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction
237
Improved calibration of a eutrophication model by use of the size variation due to succession
238
Improved calibration of a eutrophication model by use of the size variation due to succession
239
Improved calibration procedures and new standards for U–Pb and Th–Pb dating of Phanerozoic xenotime by ion microprobe
240
Improved capacitance characteristics of activated carbon-based electrodes by physicochemical base-tuning
241
Improved capacitance of SBA-15 templated mesoporous carbons after modification with nitric acid oxidation
242
Improved capacitance sensor with variable operating frequency for scanning capacitance microscopy
243
Improved capacitance sensor with variable operating frequency for scanning capacitance microscopy
244
Improved capacitance sensor with variable operating frequency for scanning capacitance microscopy
245
Improved capacity Arabic text watermarking methods based on open word space
246
Improved capillary electrophoresis conditions for the separation of kinase substrates by the laser micropipet system
247
Improved capillary electrophoresis frontal analysis by dynamically coating the capillary with polyelectrolyte multilayers
248
Improved capillary electrophoresis method for measuring rare-earth elements in synthetic geochemical standards
249
Improved capillary electrophoretic separation and mass spectrometric detection of oligosaccharides
250
Improved capillary electrophoretic separation of nine (fluoro)quinolones with fluorescence detection for biological and environmental samples
251
Improved capillary isoelectric focusing method for recombinant erythropoietin analysis
252
Improved capillary pressure model considering dual-pore geometry system in carbonate reservoirs
253
Improved CAPTCHA Method
254
Improved carbohydrate force field for gromos: ring and hydroxymethyl group conformations and exo-anomeric effect
255
Improved carbon anode properties: pretreatment of particles in polyelectrolyte solution
256
IMPROVED CARBON BONDED MGO MATERIALS AS SMART REFRACTORIES
257
Improved carbon nanotube supported Pt nanocatalysts with lyophilization
258
Improved cardiac function after prolonged hypothermic ischemia with the Na+/H+ exchange inhibitor HOE 694
259
Improved cardiac risk stratification in major vascular surgery with dobutamine-atropine stress echocardiography
260
Improved Cardiac Structure and Function With Chronic Treatment Using an Implantable Device in Resistant Hypertension: Results From European and United States Trials of the Rheos System
261
Improved cardiovascular risk stratification by a simple ECG index in hypertension
262
Improved Carry Select Adder with Reduced Area and Low Power Consumption
263
Improved catalysis of Morita–Baylis–Hillman reaction. The strong synergic effect using both an imidazolic ionic liquid and a temperature
264
Improved catalysis of nitrone 1,3-dipolar cycloadditions by solving the aggregation issue of the DBFOX/Ph-transition metal complexes
265
Improved catalysts for hydrogen/deuterium exchange reactions
266
Improved catalytic activity and stability of mesostructured sulfated zirconia by Al promoter Original Research Article
267
Improved catalytic activity upon Ge incorporation into ZSM-5 zeolites
268
Improved catalytic activity using water for isomerization of linear butene to isobutene over heteropolyacid catalysts
269
Improved catalytic and stereoselective glycosylation with glycosyl N-trichloroacetylcarbamate: application to various 1-hydroxy sugars Original Research Article
270
Improved catalytic performance of Keggin-type polyoxometalates in the oxidation of isobutane to methacrylic acid under hydrocarbon-lean conditions using antimony-doped catalysts
271
Improved catalytic performance of Pd nanowires for ethanol oxidation by monolayer of Pt
272
Improved cathode/electrolyte interface of SOFC
273
Improved Cathodic Expansions of Electrochemomechanical Behavior in Polypyrrole Films Electrodeposited from Aerosol OT Emulsion
274
Improved cavitation resistance of structural materials in pulsed liquid metal targets by surface hardening
275
Improved CE/SE scheme with particle level set method for numerical simulation of spall fracture due to high-velocity impact
276
Improved CEEMDAN and PSO-SVR Modeling for Near-Infrared Noninvasive Glucose Detection
277
Improved cell activity on biodegradable photopolymer scaffolds using titanate nanotube coatings
278
Improved cell adhesion and proliferation on synthetic phosphonic acid-containing hydrogels
279
Improved cell adhesion by plasma-induced grafting of -lactide onto polyurethane surface
280
Improved cell adhesion to flat and porous plasma-treated poly-ε-caprolactone samples
281
Improved cell adhesion to ion beam-irradiated polymer surfaces
282
Improved Cell Growth in Tobacco Suspension Cultures Expressing Vitreoscilla Hemoglobin
283
Improved cellular response on multiwalled carbon nanotube-incorporated electrospun polyvinyl alcohol/chitosan nanofibrous scaffolds
284
Improved cellularization and angiogenesis using collagen scaffolds chemically conjugated with vascular endothelial growth factor
285
Improved cellulase production via disruption of PDE01641 in cellulolytic fungus Penicillium decumbens
286
Improved cemented carbide properties after wire-EDM by pulse shaping
287
Improved central confidence intervals for the ratio of Poisson means
288
Improved central confidence intervals for the ratio of Poisson means
289
Improved ceramics leading to microtubular Solid Oxide Fuel Cells (mSOFCs)
290
Improved cerebrospinal fluid flow measurements using phase contrast balanced steady-state free precession
291
Improved ceria–carbonate composite electrolytes
292
Improved Chain based Hierarchical Data Gathering Protocol for WSN
293
IMPROVED CHANNEL ESTIMATION AND MAI-ROBUST SCHEMES FOR WIRELESS OFDMA SYSTEM
294
Improved Channel Estimation for DVB-T2 Systems by Utilizing Side Information on OFDM Sparse Channel Estimation
295
Improved Chaos-Based Cryptosystem for Medical Image Encryption and Decryption
296
Improved chaotic maps-based password-authenticated key agreement using smart cards
297
Improved chaotic particle swarm optimization algorithm for dynamic economic dispatch problem with valve-point effects
298
Improved characterisation of aortic tortuosity
299
Improved characterisation of sea ice using simultaneous aerial photography and sea ice thickness measurements
300
Improved Characteristic of Load Current of Cascaded-Flux Compression Generator
301
Improved characteristics of Bi4Ti3O12 thin film on ITO glass by using excess Bi2O3-added Bi4Ti3O12 ceramic as source target Original Research Article
302
Improved characteristics of electroless Cu deposition on Pt–Ag metallized Al2O3 substrates in microelectronics packaging
303
Improved characteristics of hydrophobic polytetrafluoroethylene–platinum catalysts for tritium recovery from tritiated water
304
Improved characterization and performance prediction of shale gas wells by integrating stimulated reservoir volume and dynamic production data
305
Improved characterization of 1.5 inch, brine-saturated rock cores using a newly designed 12.8-MHz rock core analyzer
306
Improved characterization of atherosclerotic plaques by gadolinium contrast during intravascular magnetic resonance imaging of human arteries
307
Improved characterization of tribometric test results
308
Improved charge collection efficiency of hollow sphere/nanoparticle composite TiO2 electrodes for solid state dye sensitized solar cells
309
Improved charge neutralization method for depth profiling of bulk insulators using O2þ primary beam on a magnetic sector SIMS instrument
310
Improved charging/discharging behavior of electropolymerized nanostructured composite films of polyaniline and electrochemically reduced graphene oxide
311
Improved chemical and physical stability of laccase after spherezyme immobilisation
312
Improved chemical stabilities for end-capped high performance liquid chromatography stationary phases based on poly(methyloctadecylsiloxane) thermally immobilized onto metalized silicas
313
Improved chemical stability of ascorbic acid and thiamine nitrate in L-HPC granules
314
Improved chemical stability of ZnO–BaO based varistors
315
Improved chemical treatment of Sušica surface water, Zlatibor area, and sludge application
316
Improved chemoenzymatic asymmetric synthesis of (S)-Rivastigmine
317
Improved chemosensitivity in cervical cancer to cisplatin: Synergistic activity of mahanine through STAT3 inhibition
318
Improved chi-squared tests for a composite hypothesis
319
Improved chromatographic analysis of 15N:14N ratios in ammonium or nitrate for isotope addition experiments
320
Improved chromatographic response function in HILIC analysis: Application to mixture of antidepressants
321
Improved chromatographic separation of thio-arsenic compounds by reversed-phase high performance liquid chromatography-inductively coupled plasma mass spectrometry
322
Improved churn prediction in telecommunication industry by analyzing a large network
323
Improved CIGS thin-film solar cells by surface sulfurization using In2S3 and sulfur vapor
324
Improved classification of conservation tillage adoption using high temporal and synthetic satellite imagery
325
Improved classification of dippers by individualized analysis of ambulatory blood pressure profiles
326
Improved classification of mammograms following idealized training
327
Improved Classification of Medical Universities in Iran, a New Approach
328
Improved cleanup technique for gas chromatographic–mass spectrometric determination of alkylphenols from biota extract
329
Improved climate control for potato stores by fuzzy controllers
330
Improved Clinical Effectiveness With a Collagen Vascular Hemostasis Device for Shortened Immobilization Time Following Diagnostic Angiography and Percutaneous Transluminal Coronary Angioplasty
331
Improved clinical outcome in recent years for men with metastatic nonseminomatous germ cell tumors: Carver BS, Serio AM, Bajorin D, Motzer RJ, Stasi J, Bosl GJ, Vickers AJ, Sheinfeld J. Department of Urology, Sidney Kimmel Center for Prostate and Urologic
332
Improved clinical outcomes after operation of the proximal aorta: a 10-year experience
333
Improved clinical outcomes in patients undergoing coronary artery bypass grafting with coronary endarterectomy
334
Improved clinical outcomes with abciximab therapy in acute myocardial infarction: a systematic overview of randomized clinical trials
335
Improved clipped periodic optimal control for semi-active harmonic disturbance rejection
336
Improved Clipping Technique for Reducing the Peak to Average Power Ratio in OFDM Systems
337
Improved closed loop identification of transfer function model for unstable systems
338
Improved closed-form prediction intervals for binomial and Poisson distributions
339
Improved closure models for gas entrainment and interfacial shear for slug flow modelling in horizontal pipes
340
Improved cloud detection for daytime AVHRR scenes over land
341
Improved Cloud Detection in Along Track Scanning Radiometer (ATSR) Data over the Ocean
342
Improved cloud detection in GOES scenes over land
343
Improved cloud detection in GOES scenes over the oceans
344
Improved Cloud Top Height Retrieval under Arbitrary Viewing and Illumination Conditions Using AVHRR Data
345
Improved CMAQ predictions of particulate matter utilizing the satellite-derived aerosol optical depth
346
Improved CMOS performance via enhanced carrier mobility
347
Improved CO, hydrocarbon and NO oxidation performance using zone-coated Pt-based catalysts
348
Improved CO2 separation performance with additives of PEG and PEG–PDMS copolymer in poly(2,6-dimethyl-1,4-phenylene oxide)membranes
349
Improved COA with Chaotic Initialization and Intelligent Migration for Data Clustering
350
Improved coagulation performance using preformed polymeric iron chloride (PICl)
351
Improved coating method for uniform polymer layer in infrared hollow fiber
352
Improved coding of transform coefficients in JPEG-like image compression schemes
353
Improved cognitive knowledge of midwives practising in the Eastern Cape Province of the Republic of South Africa through the study of a self-education manual
354
Improved cognitive performance and mental fatigue following a multi-vitamin and mineral supplement with added guaraná (Paullinia cupana)
355
Improved cohesive stress integration schemes for cohesive zone elements
356
Improved coincidence rejection for silicon drift detectors
357
Improved coincidence rejection for silicon drift detectors
358
Improved cold starch hydrolysis with urea addition and heat treatment at subgelatinization temperature
359
Improved collective decision-making in action for irrigated rice farmers in the Senegal River Valley
360
Improved color purity and efficiency by a coguest emitter system in doped red light-emitting devices
361
Improved color purity and efficiency in polyfluorene-based light-emitting diodes
362
Improved color purity and efficiency of blue organic light-emitting diodes via suppression of exciplex formation
363
Improved color purity and electroluminescent efficiency obtained by modulating thicknesses and evaporation rates of hole block and electron transport layers
364
Improved color purity in nano-size Eu3+-doped YBO3 red phosphor
365
Improved Colorimetric Determination of Reserpine in Tablets Using 4-Caboxyl-2,6-dintrobenzene diazonium ion (CDNBD)
366
Improved column preparation and performance in capillary electrochromatography
367
Improved comminution efficiency through controlled blasting during mining
368
Improved common carotid elasticity and intima-media thickness measurements from computer analysis of sequential ultrasound frames
369
Improved common line-based icosahedral particle image orientation estimation algorithms
370
Improved common line-based icosahedral particle image orientation estimation algorithms
371
Improved communication: an editorial
372
Improved compact accelerated precipitation softening (CAPS)
373
Improved compact linearizations for the unconstrained quadratic 0–1 minimization problem Original Research Article
374
Improved comparison of low energy loss spectra with band structure calculations: the example of BN filaments
375
Improved comparison of low energy loss spectra with band structure calculations: the example of BN filaments
376
Improved comparison of low energy loss spectra with band structure calculations: the example of BN filaments
377
Improved comparison theorem for the nonlinear multisplitting relaxation method
378
Improved Compartmental Modeling and Application to Three-Phase Contaminant Transport in Unsaturated Porous Media
379
Improved compatibility of liquid chromatography with electrospray tandem mass spectrometry for tracing occurrence of barbital homologous residues in animal tissues
380
Improved compatibilization in ternary poly(ether imide)/polyarylate–rodrun blends by means of interchange reactions
381
Improved compensation for the mutual coupling effect in a dipole array for direction finding
382
Improved competitive enzyme immunoassay for the diagnosis of bovine brucellosis
383
Improved competitive enzyme immunoassay for the diagnosis of bovine brucellosis
384
Improved compliance and increased intake of energy and protein with a high energy density, low volume multi-nutrient supplement
385
Improved compliance with quality measures at hospital discharge with a computerized physician order entry system
386
Improved compliance with recommended infection control practices in the dental office between 1994 and 1995, , , ,
387
Improved composite materials for rechargeable lithium metal polymer batteries
388
Improved compositional analysis of block copolymers using Diffusion Ordered NMR Spectroscopy Original Research Article
389
Improved composting of poultry feces via supplementation with ammonia oxidizing archaea
390
Improved composting of Undaria pinnatifida seaweed by inoculation with Halomonas and Gracilibacillus sp. isolated from marine environments
391
Improved computation of beliefs based on confusion matrix for combining multiple classifiers
392
Improved computational performance of MFA using elementary metabolite units and flux coupling
393
Improved computerized evaluation of abdominal aortic aneurysm
394
Improved concentration of citrus essential oil by solvent extraction with acetate ionic liquids
395
Improved concepts and methods in analysis and evaluation of the urban climate for optimizing urban planning processes
396
Improved condenser design and condenser-fan operation for air-cooled chillers
397
Improved conditioning of infinite elements for exterior acoustics
398
Improved conditions for converting sterically hindered amides to 1,5-disubstituted tetrazoles
399
Improved conditions for global exponential stability of a general class of memristive neural networks
400
Improved conditions for neutral delay systems with novel inequalities
401
Improved conditions for the addition of alkoxides to di(ethylene glycol) di-p-tosylate: application to the stereospecific synthesis of the trans-isomers of dicyclohexano-18-crown-6
402
Improved conditions for the aerobic reductive decolourisation of azo dyes by Candida zeylanoides
403
Improved conditions for the robustness of binary block designs against the loss of whole blocks
404
Improved conduction in transparent single walled carbon nanotube networks drop-cast from volatile amine dispersions
405
Improved conductivity and electrical properties of polyaniline in the presence of rare-earth cations and magnetic field
406
Improved conductivity of suspended carbon fibers through integration of C-MEMS and Electro-Mechanical Spinning technologies
407
Improved confidence estimators for confidence sets of location parameters
408
Improved confidence estimators for the usual one-sided confidence intervals for the ratio of two normal variances
409
Improved confidence interval estimation of the population standard deviation using ranked set sampling: A simulation study
410
Improved confidence regions for a mean vector under general conditions
411
Improved configuration of supported nickel catalysts in a steam reformer for effective hydrogen production from methane
412
Improved conformational space annealing method to treat β-structure with the UNRES force-field and to enhance scalability of parallel implementation
413
Improved conjugation and purification strategies for the preparation of protein–polysaccharide conjugates
414
Improved consolidation of alumina by agarose gelation
415
Improved constrained cascade control for parallel processes
416
Improved constraints on wimps from the international germanium experiment IGEX
417
Improved construction for universality of determinant and permanent
418
Improved constructions of secret sharing schemes by applying (λ,ω)-decompositions
419
Improved containment transport modelling for hypothetical accidents in fusion power plants
420
Improved Content Aware Image Retargeting Using Strip Partitioning
421
Improved continuation rate of depo-provera in teen mothers
422
Improved contralateral subtraction images by use of elastic matching technique
423
Improved contrast between the coloured and transparent states in electrochromic Ni–Al layered double hydroxide films in mixtures of electroactive ions
424
Improved contrast polymer light-emitting diode with optical interference layers
425
Improved control of anthracnose rot in loquat fruit by a combination treatment of Pichia membranifaciens with CaCl2
426
Improved control of moldy-core decay ( Alternaria alternata ) in Red Delicious apple fruit by mixtures of DMI fungicides and captan
427
Improved control of postharvest blue mold rot in pear fruit by a combination of Cryptococcus laurentii and gibberellic acid
428
Improved control of postharvest decay in Chinese bayberries by a combination treatment of ethanol vapor with hot air
429
Improved control of powdery mildew (Sphaerotheca pannosa) of nectarines in Israel using strobilurin and polyoxin B fungicides; mixtures with sulfur; and early bloom applications
430
Improved controller for power conditioner using high-temperature superconducting magnetic energy storage (HTS-SMES)
431
Improved convected particle domain interpolation method for coupled dynamic analysis of fully saturated porous media involving large deformation
432
Improved convergence analysis of the Secant method using restricted convergence domains with real-world applications
433
Improved convergence in the three-nucleon system at very low energies Original Research Article
434
Improved convergence of rutile-TiO2(1 1 0) slab properties with thickness by one-side saturation
435
Improved convergence of scattering calculations in the oscillator representation
436
Improved convergence rate for the simulation of stochastic differential equations driven by subordinated Lévy processes
437
Improved convergence rates for tail probabilities for sums of i.i.d. Banach space valued random vectors
438
Improved convergence theorems of modulus-based matrix splitting iteration methods for linear complementarity problems
439
Improved convergence theorems of Newtonʹs method designed for the numerical verification for solutions of differential equations
440
Improved converse theorems and fractional moduli of smoothness in Orlicz spaces
441
Improved Conversion and Selectivity of a Diels-Alder Cycloaddition by Use of Emulsions of Carbon Dioxide and Water
442
Improved conversion efficiency in dye-sensitized solar cells based on electrospun Al-doped ZnO nanofiber electrodes prepared by seed layer treatment
443
Improved conversion of plant oils and animal fats into biodiesel and co-product
444
Improved convex upper bound via conditional comonotonicity
445
Improved cook stove adoption and impact assessment: A proposed methodology
446
Improved cooking stoves and firewood consumption: Quasi-experimental evidence from the Northern Peruvian Andes
447
Improved cookstoves in rural India: how improved are they?: A critique of the perceived benefits from the National Programme on Improved Chulhas (NPIC)
448
Improved coolant supply through slotted grinding wheel
449
Improved cooler design of electric arc furnace refractory in mining industry using thermal analysis modeling and simulation
450
Improved co-production of S-adenosylmethionine and glutathione using citrate as an auxiliary energy substrate
451
Improved core design of the high temperature supercritical-pressure light water reactor
452
Improved correction method for using passive air samplers to assess the distribution of PCNs in the Dongjiang River basin of the Pearl River Delta, South China
453
Improved correlation analysis and visualization of industrial alarm data
454
Improved correlation between multiple mutations within the NS5A region and virological response in European patients chronically infected with hepatitis C virus type 1b undergoing combination therapy
455
Improved correlations for heavy n-paraffin physical properties
456
Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B
457
Improved corrosion protection of AZ31 magnesium alloy through plasma electrolytic oxidation and aerosol deposition duplex treatment
458
Improved corrosion resistance of a high-strength Mg–Al–Mn–Ca magnesium alloy made by rapid solidification powder metallurgy
459
Improved corrosion resistance of AA2024 alloys through hybrid organic–inorganic sol–gel coatings produced from sols with controlled polymerisation
460
Improved corrosion resistance of AZ91D magnesium alloy by an aluminium-alloyed coating
461
Improved corrosion resistance of GaN electrodes in NaCl electrolyte for photoelectrochemical hydrogen generation
462
Improved Corrosion Resistance of Magnesium Alloy in SimulatedConcrete Pore Solution by Hydrothermal Treatment
463
Improved corrosion resistance of stainless steel X6CrNiMoTi17-12-2 by slide diamond burnishing
464
Improved corrosion resistance of thermally sprayed coating via surface grinding and electroplating techniques
465
Improved corrosion resistance of tool steel H13 by means of cadmium ion implantation and deposition
466
Improved corrosion resistance on biodegradable magnesium by zinc and aluminum ion implantation
467
Improved Coulomb correction formulae for Bose-Einstein correlations
468
Improved coupled column liquid chromatographic method for high-speed direct analysis of urinary trans,trans-muconic acid, as a biomarker of exposure to benzene
469
Improved coupled perturbed Hartree–Fock and Kohn–Sham convergence acceleration
470
Improved coupled-column liquid chromatographic method for the determination of glyphosate and aminomethylphosphonic acid residues in environmental waters
471
Improved coverage of fungal diversity in polluted groundwaters by semi-nested PCR
472
Improved Cr2O3 adhesion by Ce ion implantation in the presence of interfacial sulfur segregation Original Research Article
473
Improved crack growth corrections for J–R-curve testing
474
Improved Cramer-Rao Inequality for Randomly Censored Data
475
Improved creaminess of low-fat yoghurt: The impact of amylomaltase-treated starch domains
476
Improved criteria for distributional convergence of point processes
477
Improved critical-current-density uniformity by using anodization
478
IMPROVED CRLH-TL WITH ARBITRARY CHARACTERISTIC IMPEDANCE AND ITS APPLICATION IN HYBRID RING DESIGN
479
Improved cross site scripting filter for input validation against attacks in web services
480
Improved cross-correlation for template matching on the Laplacian pyramid
481
Improved crosshole radar tomography by using direct and reflected arrival times
482
Improved cross-linked enzyme aggregates for the production of desacetyl β-lactam antibiotics intermediates
483
Improved cross-metathesis of acrylate esters catalyzed by 2nd generation ruthenium carbene complexes
484
Improved cross-section modeling methodology for coupled three-dimensional transient simulations
485
Improved cryopreservation of bovine preimplantation embryos cultured in chemically defined medium
486
Improved cryosections and specific immunohistochemical methods for detecting hypoxia in mouse and rat cochleae
487
Improved cryptanalysis of a knapsack-based probabilistic encryption scheme
488
Improved crystalline structure and H2S sensing performance of CuO–Au–SnO2 thin film using SiO2 additive concentration
489
Improved CT image reconstruction through partial Fourier sampling
490
Improved CT-detection of acute bowel ischemia using frequency selective non-linear image blending
491
Improved cubature formulae of high degrees of exactness for the square
492
Improved Cuckoo Optimization Algorithm for Excitation Control of Synchronous Generators
493
IMPROVED CUCKOO SEARCH ALGORITHM FOR FEEDFORWARD NEURAL NETWORK TRAINING
494
IMPROVED CUCKOO SEARCH FOR LOSS ALLOCATION IN TRANSMISSION LINE
495
Improved Cuckoo Search-based Clustering Protocol for Wireless Sensor Networks
496
Improved CuCrZr/316L transition for plasma facing components
497
Improved Curing Conditions and Mechanical/Chemical Properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
498
IMPROVED CURRENT DECOMPOSITION IN HELICAL ANTENNAS USING THE ESPRIT ALGORITHM
499
Improved Current-Regulated Delta Modulator for Reducing Switching Frequency and Low-Frequency Current Error in Permanent Magnet Brushless AC Drives
500
Improved customer choice predictions using ensemble methods
501
Improved C-V Level Set Algorithm and its Application in Video Segmentation
502
Improved CVD diamond coatings on WC–Co tool substrates
503
Improved cyclability by tungsten addition in electrochromic NiO thin films
504
Improved cyclability of lithium–sulfur battery cathode using encapsulated sulfur in hollow carbon nanofiber@nitrogen-doped porous carbon core–shell composite
505
Improved cyclability of Na-birnessite partially substituted by cobalt
506
Improved cycle performance of orthorhombic LiMn0.95−xMxCr0.05O2; M = Al, Ga, Yb and In, synthesized by hydrothermal technique
507
Improved cyclic urea inhibitors of the HIV-1 protease: synthesis, potency, resistance profile, human pharmacokinetics and X-ray crystal structure of DMP 450 Original Research Article
508
Improved cycling performance of bismuth-modified amorphous manganese oxides as cathodes for rechargeable lithium batteries
509
Improved cycling performance of nano-composite Li2Ni2(MoO4)3 as a lithium battery cathode material
510
Improved cytotoxicity testing of magnesium materials
511
Improved D-(_ ^3)He Fusion Reaction Characteristics Parameters
512
Improved daily precipitation nitrate and ammonium concentration models for the Chesapeake Bay Watershed
513
Improved damage detection method based on Element Modal Strain Damage Index using sparse measurement
514
Improved damage identification in bridge structures subject to moving loads: Numerical and experimental studies
515
Improved damage identification in bridge structures subject to moving loads: Numerical and experimental studies
516
IMPROVED DAMAGE IDENTIFICATION METHOD BASED ON MODAL INFORMATION
517
Improved Darcy and non-Darcy flow formulations around hydraulically fractured wells
518
Improved dark matter limits from pulse shape discrimination in a low background sodium iodide detector at the Boulby mine
519
Improved Data Access Method In Ad hoc Networks
520
Improved data reduction algorithm for the needle probe method applied to in-situ thermal conductivity measurements of lunar and planetary regoliths
521
Improved de/hydrogenation properties and favorable reaction mechanism of CeH2 + KH co-doped sodium aluminum hydride
522
Improved debromination of polybrominated diphenyl ethers by bimetallic iron–silver nanoparticles coupled with microwave energy Original Research Article
523
Improved decay estimates in time-dependent Stokes flow
524
Improved decay rates for solutions to one-dimensional linear and semilinear dissipative wave equations in all space
525
Improved dechlorination and mineralization of 4-chlorophenol in a sequential biocathode–bioanode bioelectrochemical system with mixed photosynthetic bacteria
526
Improved Decision Neural Network (IDNN) based consensus method to solve a multi-objective group decision making problem
527
Improved decision tree construction based on attribute selection and data sampling for fault diagnosis in rotating machines
528
Improved decision tree construction based on attribute selection and data sampling for fault diagnosis in rotating machines
529
Improved decomposition–coordination and discrete differential dynamic programming for optimization of large-scale hydropower system
530
Improved decremental algorithms for maintaining transitive closure and all-pairs shortest paths
531
Improved deep desulphurisation of middle distillates by a two-phase reactor with pre-saturator
532
IMPROVED DEEP LEARNING ARCHITECTURE FOR DEPTH ESTIMATION FROM SINGLE IMAGE
533
Improved defect profiling with slow positrons
534
Improved definition of anomalous left coronary artery by magnetic resonance coronary angiography
535
Improved definition of bond orders for correlated wave functions
536
Improved degradation of organophosphate dichlorvos by Trichoderma atroviride transformants generated by restriction enzyme-mediated integration (REMI)
537
Improved degree conditions for 2-factors with cycles in hamiltonian graphs
538
Improved degree conditions for Hamiltonian properties
539
Improved degree of conversion of model self-etching adhesives through their interaction with dentine
540
Improved degree of conversion of model self-etching adhesives through their interaction with dentine
541
Improved dehydrogenation of MgH2–Li3AlH6 mixture with TiF3 addition
542
Improved dehydrogenation performances of TiB2-doped sodium alanate
543
Improved dehydrogenation properties of the combined Mg(BH4)2·6NH3–nNH3BH3 system
544
Improved delay-dependent bounded real lemma for uncertain time-delay systems
545
Improved delay-dependent exponential stability criteria for time-delay system
546
Improved delay-dependent robust stability criteria for recurrent neural networks with time-varying delays
547
Improved delay-dependent robust stabilization conditions of uncertain T–S fuzzy systems with time-varying delay
548
Improved delay-dependent stability analysis for neural networks with time-varying delays
549
Improved delay-dependent stability criteria for continuous system with two additive time-varying delay components
550
Improved delay-dependent stability criteria for systems with a delay varying in a range
551
Improved Delay-Dependent Stability Criteria for Time-Delay Systems
552
Improved delay-dependent stability of neutral type neural networks with distributed delays
553
Improved Delayed Detached Eddy Simulation of the Slipstream and Trackside Pressure of Trains with Different Horizontal Profiles
554
Improved delay-range-dependent robust stability criteria for a class of Lur’e systems with sector-bounded nonlinearity
555
Improved delay-range-dependent robust stability for uncertain systems with interval time-varying delay
556
Improved delay-range-dependent stability criteria for linear systems with time-varying delays
557
Improved Delsarte bounds for spherical codes in small dimensions
558
Improved dense catalytically active polymer membranes of different configuration to separate and react organics simultaneously by pervaporation
559
Improved dense multivariate polynomial factorization algorithms
560
Improved densification and properties of pressureless-sintered lithium disilicate glass-ceramics
561
Improved density functional calculations including magnetic effects for RfCl4 and its homologues
562
Improved density measurement by FIR laser interferometer on EAST tokamak
563
Improved depiction of small anatomic structures in MR images using Gaussian-weighted spirals and zero-filled interpolation
564
Improved deposition and deprotection of silane tethered 3,4 hydroxypyridinone (HOPO) ligands on functionalized nanoporous silica
565
Improved deposition of large scale ordered nanosphere monolayers via liquid surface self-assembly
566
Improved derivatization technique for gas chromatography–mass spectrometry determination of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone in drinking water Original Research Article
567
Improved description of longitudinal strain solitary waves
568
Improved description of the image-scattering phenomenology at low energies in covariant baryon chiral perturbation theory Original Research Article
569
Improved description of the magnetocaloric effect in the double exchange model
570
Improved design and experimental demonstration of a bi-directional microfluidic driving system
571
Improved design and system approach of a three phase inductive HTS fault current limiter for a 12 kVA synchronous generator
572
Improved design capabilities of the Fiber SIM composite software
573
Improved design for electric vehicle induction motors using an optimisation procedure
574
Improved design for heat transfer performance of a novel phase change material (PCM) thermal energy storage (TES)
575
Improved design for high resolution electrospray ionization ion mobility spectrometry
576
Improved design for parallel multiplier based on phase-mode logic
577
Improved design methods for scarf repairs to highly strained composite aircraft structure
578
Improved design of an extra-high-voltage expansion substation connector through magnetic field analysis
579
Improved design of metal-organic frameworks for efficient hydrogen storage at ambient temperature: A multiscale theoretical investigation
580
Improved design of the main energy-absorbing automotive parts based on traffic accident analysis
581
Improved design rules for fixed ended cold-formed steel columns subject to flexural–torsional buckling
582
Improved design rules for hollow flange sections subject to lateral distortional buckling
583
Improved destriping of GOES images using finite impulse response filters
584
Improved detectability in pharmacokinetic study of tibolone by gas chromatography-high resolution mass spectrometry with selected ion monitoring
585
Improved detectability of wavelength modulation diode laser absorption spectrometry applied to window-equipped graphite furnaces by 4th and 6th harmonic detection
586
Improved detection and quantification of mouse cytomegalovirus by real-time PCR
587
Improved detection limit for a direct determination of 8-hydroxy-2′-deoxyguanosine in untreated urine samples by capillary electrophoresis with optical detection
588
Improved detection limit for ammonium/ammonia achieved by Berthelotʹs reaction by use of solid-phase extraction coupled to diffuse reflectance spectroscopy Original Research Article
589
Improved detection limit for an electrochemical γ-aminobutyric acid sensor based on stable NADPH detection using an electron cyclotron resonance sputtered carbon film electrode
590
Improved Detection Limits and Sensitivities of Potentiometric Titrations
591
Improved detection limits of linear Raman-spectroscopy on aerosols
592
Improved detection methods for fruit tree phytoplasmas
593
Improved detection of acute myocardial infarction using a diagnostic algorithm based on calculated epicardial potentials
594
Improved detection of Candida albicans with carbon nanotube field-effect transistors
595
Improved detection of cardiac confusion with cardiac troponin I
596
Improved detection of citrus psorosis virus using polyclonal and monoclonal antibodies
597
Improved Detection of Coronary Artery Disease by Stress Perfusion Cardiovascular Magnetic Resonance With the Use of Delayed Enhancement Infarction Imaging Original Research Article
598
Improved detection of drugs of abuse using high-performance ion mobility spectrometry with electrospray ionization (ESI-HPIMS) for urine matrices
599
Improved detection of Escherichia coli 0157
600
Improved detection of Mycobacterium paratuberculosis in milk
601
Improved detection of pheochromocytoma using ratios of urinary metanephrine and normetanephrine to creatinine
602
Improved detection of phosphopeptides by negative ion matrix-assisted laser desorption/ionization mass spectrometry using a proton sponge co-matrix Original Research Article
603
Improved detection of posterior myocardial wall ischemia with the 15-lead electrocardiogram,
604
Improved detection of power transformer winding movement by extending the FRA high frequency range
605
Improved detection of soil microorganisms using fluorescence in situ hybridization (FISH) and catalyzed reporter deposition (CARD-FISH)
606
Improved detection of soil microorganisms using fluorescence in situ hybridization (FISH) and catalyzed reporter deposition (CARD-FISH)
607
Improved detection of sugar addition to apple juices and concentrates using internal standard 13C IRMS
608
Improved detection of synovial boundaries in ultrasound examination by using a cascade of active-contours
609
Improved detection of the invisible
610
Improved detection of the T341C polymorphism in human N-acetyltransferase (NAT2) gene by using two complementary PCR-RFLP methods: better than automated DNA sequencing for detection of heterozygotes
611
Improved detection of time windows of brain responses in fMRI using modified temporal clustering analysis
612
Improved detection of toxic chemicals by Photobacterium phosphoreum using modified Boss medium
613
Improved detection of toxic chemicals using bioluminescent bacteria Original Research Article
614
Improved detection of Trypanosoma brucei by lysis of red blood cells, concentration and LED fluorescence microscopy
615
Improved detection of turbid waters from ocean color sensors information
616
Improved detection resolution in single particle microbeam system
617
Improved detection resolution in single particle microbeam system
618
Improved detection sensitivity of Pt/β-Ga2O3/GaN hydrogen sensor diode
619
Improved determination of |Vub| from inclusive semileptonic B-meson decays
620
Improved determination of 2-dodecylcyclobutanone in irradiated ground beef patties by gas-chromatography–mass-spectrometry (GC/MS) coupled with solid-phase microextraction (SPME) technique
621
Improved determination of aeroelastic stability properties using a direct method
622
Improved determination of bovine glutaminyl cyclase activity using precolumn derivatization and reversed-phase high-performance liquid chromatography with ultraviolet detection
623
Improved Determination of Ethane (C2H6) Abundance in Titanʹs Stratosphere
624
Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography
625
Improved determination of milk oligosaccharides using a single derivatization with anthranilic acid and separation by reversed-phase high-performance liquid chromatography
626
Improved determination of phosphorus contamination during ion implantation by SRP and simulations
627
Improved determination of plutonium content and isotopic ratios in low activity samples by α-particle and underground L X-ray measurement
628
Improved Determination of Q-Factor and Resonant Frequency by a Quadratic Curve-Fitting Method.
629
Improved determination of quinolones in milk at their MRL levels using LC–UV, LC–FD, LC–MS and LC–MS/MS and validation in line with regulation 2002/657/EC Original Research Article
630
Improved determination of retardation in digital photoelasticity by load stepping
631
Improved determination of selenium in plant and peat samples using hydride generation-atomic fluorescence spectrometry (HG-AFS) Original Research Article
632
Improved determination of the classical sphaleron transition rate Original Research Article
633
Improved determination of the electroweak penguin contribution to ϵ′/ϵ in the chiral limit
634
Improved determination of the position and activity of a radioactive point source inside a bulky medium using several detectors. The special case of a lung counter—A general view
635
Improved determination of tributyl phosphate degradation products (mono- and dibutyl phosphates) by ion chromatography
636
Improved determination of α(MZ2) and the anomalous magnetic moment of the muon
637
Improved deterministic approximation algorithms for Max TSP
638
Improved development by strategic specification processes
639
Improved development by strategic specification processes
640
Improved development of DNA-injected bovine embryos co-cultured with mouse embryonic fibroblast cells
641
Improved development of ovine matured oocyte following solid surface vitrification (SSV): Effect of cumulus cells and cytoskeleton stabilizer
642
Improved device performance based on crosslinking of poly (3-hexylthiophene)
643
IMPROVED DIABETES CONTROL IN THE ELDERLY DELAYS GLOBAL COGNITIVE DECLINE
644
Improved diagnosis of a common mutation (R248C) in the human growth factor receptor 3 (FGFR3) gene that causes type I Thanatophoric dysplasia
645
Improved Diagnosis of Sickle Cell Mutation by a Robust Amplification Refractory Polymerase Chain Reaction
646
Improved Diagnosis of the Polysensitized Allergic Rhinitis Patients Using Component Resolved Diagnosis Method
647
Improved diagnosis of tuberculosis by better sputum quality
648
Improved diagnostic accuracy with 16-row multi-slice computed tomography coronary angiography Original Research Article
649
IMPROVED DIAGNOSTIC STRATEGY FOR FOOT-ANDMOUTH DISEASE IN BULGARIA
650
Improved diagnostic testing for ataxia–telangiectasia by immunoblotting of nuclear lysates for ATM protein expression
651
Improved diagnostic value of combined time and frequency domain analysis of the signal-averaged electrocardiogram after myocardial infarction
652
Improved dialytic elimination algorithm for the forward kinematics of the general Stewart–Gough platform
653
Improved dielectric and electro-optical parameters of ZnO nano-particle (8% Cu2+) doped nematic liquid crystal
654
Improved Dielectric Model for Polyvinyl Alcohol-Water Hydrogel at Microwave Frequencies
655
Improved dielectric properties for chemically functionalized exfoliated graphite nanoplates/syndiotactic polystyrene composites prepared by a solution-blending method
656
Improved dielectric properties of (Bi1.5Zn0.5)(Zn0.5Nb1.5)O7 by the substitution of Zn2+ on the A site based on the structure characteristics
657
Improved dielectric properties of (Pb,Ca)TiO3 thin films prepared by metal-organic decomposition method Original Research Article
658
Improved dielectric properties of BaxSr1−xTiO3-based composite ceramics derived from core–shell structured nanopowders
659
Improved dielectric properties of CaLa4Ti5O17 ceramics with Zr substitution at microwave frequency
660
Improved differential control for solar heating systems
661
Improved differential evolution algorithms for handling economic dispatch optimization with generator constraints
662
Improved differential evolution approach based on cultural algorithm and diversity measure applied to solve economic load dispatch problems Original Research Article
663
Improved differential evolution approach for optimization of surface grinding process
664
IMPROVED DIFFERENTIAL EVOLUTION STRATEGY FOR ANTENNA ARRAY PATTERN SYNTHESIS PROBLEMS
665
Improved diffusion barrier performance of Ru/TaN bilayer by N effusion in TaN underlayer
666
Improved diffusion methods for determination of inorganic nitrogen in soil extracts and water
667
Improved digital current control methods in switched reluctance motor drives
668
Improved digital image analysis technique for the evaluation of segregation in pseudo-2D beds
669
Improved digital tachometer with reduced sensitivity to sensor nonideality
670
Improved digital tracking controller design for pilot-scale unmanned helicopter
671
Improved dimensional stability of Nafion membrane modified using a layer by layer self-assembly of biophilic polymers
672
Improved dimethylzinc-promoted vinylation of nitrones with vinylboronic esters
673
Improved direct bonding method of Nd:YVO4 and YVO4 laser crystals
674
Improved direct electron transfer and electrocatalytic activity of horseradish peroxidase immobilized on gemini surfactant–polyvinyl alcohol composite film
675
Improved direct piezoelectric biosensors operating in liquid solution for the competitive label-free immunoassay of 2,4-dichlorophenoxyacetic acid
676
Improved Direct Torque Control for Induction Machine Drives Based on Fuzzy Sector Theory
677
Improved direct torque control for induction motor drives with rapid prototyping system
678
Improved direct torque control of an induction generator used in a wind conversion system connected to the grid
679
Improved Direct Torque Control of Axial-Flux Hysteresis Motor
680
Improved direction estimation for Di Zenzoʹs multichannel image gradient operator
681
Improved discharge capacity and suppressed surface passivation of zinc anode in dilute alkaline solution using surfactant additives
682
Improved discrete inequalities in n independent variables Original Research Article
683
Improved discriminate analysis for high-dimensional data and its application to face recognition
684
Improved dispersibility of graphene oxide in o-dichlorobenzene by adding a poly(3-alkylthiophene) Original Research Article
685
Improved Dispersibility of Green Tea Powder by Microparticulation and Formulation
686
Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process
687
Improved dispersion and mechanical properties of hybrid nanocomposites
688
Improved dispersion of aluminum nitride particles in epoxy resin by adsorption of two-layer surfactants
689
Improved dispersion of carbon nanotubes in aluminum nanocomposites
690
Improved dispersion of grafted starch granules leads to lower water resistance for starch-g-PLA/PLA composites
691
Improved dispersion of PEG-functionalized carbon nanofibers in toluene
692
Improved Dissolution Behavior of Dipyridamole Formulation with Precipitation Inhibitor
693
Improved dissolved oxygen status following removal of exotic weed mats in important fish habitat lagoons of the tropical Burdekin River floodplain, Australia
694
Improved Distributed Particle Filter Architecture with Novel Resampling Algorithm for Signal Tracking
695
Improved distribution system planning using computational evolution
696
Improved district heating substation efficiency with a new control strategy
697
Improved dithiocarbamate/oxine solvent extraction method for the preconcentration of trace metals from seawater using metal exchange back-extraction
698
Improved DNA extraction efficiency from low level cell numbers using a silica monolith based micro fluidic device Original Research Article
699
Improved DNA Extraction Method for Porcine Contaminants, Detection in Imported Meat to The Saudi Market
700
Improved doppler detection of proximal left anterior descending coronary artery stenosis after intravenous injection of lung-crossing contrast agent: transesophageal doppler echocardiographic study
701
Improved Doppler echocardiographic assessment of the left atrial appendage by peripheral vein injection of sonicated albumin microbubbles,
702
Improved double emulsion technology for fabricating autofluorescent microcapsules as novel ultrasonic/fluorescent dual-modality contrast agents
703
Improved double-quantum NMR correlation spectroscopy of dipolar-coupled quadrupolar spins
704
Improved drain current characteristics of tunnel field effect transistor with heterodielectric stacked structure
705
Improved Drift Flux Void Fraction Model for Horizontal Gas-liquid Intermittent Flow
706
Improved Droop Control Method for Reactive Power Sharing in Autonomous Microgrids
707
Improved DS acoustic–seismic modality fusion for ground-moving target classification in wireless sensor networks
708
Improved DSP-controlled online UPS system with high real output power
709
IMPROVED DUAL BAND-NOTCHED UWB SLOT ANTENNA WITH CONTROLLABLE NOTCHED BANDWIDTHS
710
Improved dual photometric-contactless conductometric detector for capillary electrophoresis
711
Improved dual photometric-contactless conductometric detector for capillary electrophoresis Original Research Article
712
IMPROVED DUAL-AXIS SOLAR TRACKING SYSTEM
713
Improved ductile fracture criterion for cold forming of spheroidised steel
714
Improved ductility and oxidation resistance in Nb and Al co-substituted MoSi2
715
Improved ductility in ZM21 magnesium–aluminium macrocomposite produced by co-extrusion
716
Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae
717
Improved ductility of Mg–Zn–Ce alloy by hot pack-rolling
718
Improved Durability of Norbornadiene Derivatives Using Antioxidized Reagent
719
Improved durability of Pt/CNT catalysts by the low temperature self-catalyzed reduction for the PEM fuel cells
720
Improved durability of recycled porous asphalt
721
Improved durability of Si/B/N/C random inorganic networks
722
Improved durability of SOEC stacks for high temperature electrolysis
723
Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age
724
Improved dust capture methods for crushing plant
725
Improved dye-sensitized solar cells by composite ionic liquid electrolyte incorporating layered titanium phosphate
726
Improved dye-sensitized solar cells using ionic nanocomposite gel electrolytes
727
Improved dynamic analysis of structures with mechanical uncertainties under deterministic input
728
Improved Dynamic Dictionary Matching
729
Improved dynamic MRI reconstruction by exploiting sparsity and rank-deficiency
730
Improved dynamic performance of hybrid PEM fuel cells and ultracapacitors for portable applications
731
Improved dynamic programs for some batching problems involving the maximum lateness criterion
732
Improved dynamic security assessment for AC/DC power systems using energy functions
733
Improved dynamic simulation of end-milling process using time series analysis
734
Improved Dynamic Text Indexing
735
Improved early morbidity and mortality after Fontan operation: The mayo clinic experience, 1987 to 1992
736
Improved Early Recognition of Coronavirus Disease-2019 (COVID-19): Single-Center Data from a Shanghai Screening Hospital
737
Improved early results with the Fontan operation in adults with functional single ventricle
738
Improved early training in the UK required
739
Improved earthen stoves in coastal areas in Bangladesh: Economic, ecological and socio-cultural evaluation
740
Improved ecological network analysis for environmental sustainability assessment; a case study on a forest ecosystem
741
Improved ecological network analysis for environmental sustainability assessment; a case study on a forest ecosystem
742
Improved economic viability of integrated biogas energy and compost production for sustainable palm oil mill management
743
Improved edge detection and noise removal in gravity maps via the use of gravity gradients
744
Improved EEMD Denoising Method Based on Singular Value Decomposition for the Chaotic Signal
745
Improved effective charge density in MOS capacitors with PECVD SiOxNy dielectric layer obtained at low RF power
746
Improved effectiveness and efficiency in measuring soil enzymes as universal soil quality indicators using microplate fluorimetry
747
Improved effectiveness and efficiency in measuring soil enzymes as universal soil quality indicators using microplate fluorimetry
748
Improved efficacy and less bleeding: Further evidence of a unique uncoupling of benefit and risk with bivalirudin
749
Improved efficacy with amodiaquine instead of chloroquine in sulfadoxine/pyrimethamine combination treatment of falciparum malaria in Uganda: Experience with fixed-dose formulation
750
Improved efficiencies of light-emitting diodes through incorporation of charge transporting components in tri-block polymers
751
Improved efficiency by a fluorescent dye in red organic light-emitting devices based on a europium complex
752
Improved efficiency for green and red emitting electroluminescent devices using the same cohost composed of 9,10-di(2-naphthyl) anthracene and tris-(8-hydroxyquinolinato) aluminum
753
Improved efficiency for recapture studies from auxiliary experimentation
754
Improved efficiency in micellar liquid chromatography using triethylamine and 1-butanol as mobile phase additives to reduce surfactant adsorption
755
Improved efficiency in OLEDs with a thin Alq3 interlayer
756
Improved efficiency in red phosphorescent organic light-emitting devices using double doping structure
757
Improved efficiency of a divalent herbicide in the presence of clay, by addition of monovalent organocations
758
Improved efficiency of a non-hydrostatic, unstructured grid, finite volume model
759
Improved efficiency of a thiophene linked ruthenium polypyridine complex for dry dye-sensitized solar cells
760
Improved efficiency of adaptive robust control by model unfalsification
761
Improved efficiency of Al0.36Ga0.64As solar cells with a pp−n−n structure
762
Improved efficiency of betanin-based dye-sensitized solar cells
763
Improved efficiency of dye sensitized solar cells by treatment of the dyed titania electrode with alkyl(trialkoxy)silanes
764
Improved efficiency of dye-sensitized solar cells applied with F-doped TiO2 electrodes
765
Improved efficiency of dye-sensitized solar cells applied with nanostructured N–F doped TiO2 electrode Original Research Article
766
Improved efficiency of dye-sensitized solar cells through fluorine-doped TiO2 blocking layer
767
Improved efficiency of energy use of a heat transformer using a water purification system Review Article
768
Improved efficiency of high resolution thermal and cold neutron imaging
769
Improved efficiency of high resolution thermal and cold neutron imaging
770
Improved efficiency of InAs/GaAs quantum dots solar cells by Si-doping
771
Improved efficiency of inverted organic solar cells using organic hole collecting interlayer
772
Improved efficiency of molecular organic EL devices based on super molecular structure
773
Improved Efficiency of Object Code Verification Using Statically Abstracted Object Code
774
Improved efficiency of organic light-emitting diodes based on a europium complex by fluorescent dye
775
Improved efficiency of organic/inorganic photovoltaic devices by electrospun ZnO nanofibers
776
Improved efficiency of polymer LEDs using electron transporting layer
777
Improved efficiency of PPV due to bulky tetraphenylmethane pendants
778
Improved efficiency of sol–gel synthesized mesoporous anatase nanopowders in photocatalytic degradation of metoprolol
779
Improved efficiency of the chemical bath deposition method during growth of ZnO thin films
780
Improved efficiency of uidA gene transfer in stone pine (Pinus pinea) cotyledons using a modified binary vector
781
Improved eigenvalue sensitivity for finite-precision digital controller realisations via orthogonal Hermitian transform
782
Improved eigenvalues for combined dynamical systems using a modified finite element discretization scheme
783
Improved EKF Method of Estimating Locations with Sudden High Jumps in the Measurement Noise
784
IMPROVED ELASTOMERS THROUGH CONTROL OF NETWORK CHAIN-LENGTH DISTRIBUTIONS
785
IMPROVED ELASTOMERS THROUGH CONTROL OF NETWORK CHAIN-LENGTH DISTRIBUTIONS
786
Improved electrical and interfacial properties of RF-sputtered HfAlOx on n-GaAs with effective Si passivation
787
Improved electrical and optical characteristics of transparent graphene thin films produced by acid and doping treatments Original Research Article
788
Improved electrical and optical properties of GZO films with a thin TiO2 buffer layer deposited by RF magnetron sputtering
789
Improved electrical and optical properties of MEH-PPV light emitting diodes using Ba buffer layer and porphyrin
790
Improved electrical and thermal properties of polypyrrole prepared by the repetition of a combination of chemical polymerization and 2-naphthalenesulfonic acid treatment
791
Improved electrical conductivity in Pr2Ni(Cu,Ga)O4 film with nano thickness
792
Improved electrical conductivity of a non-covalently dispersed graphene–carbon nanotube film by chemical p-type doping Original Research Article
793
Improved electrical conductivity of Ce0.9Gd0.1O1.95 and Ce0.9Sm0.1O1.95 by co-doping
794
Improved electrical conductivity of PEDOT-based electrode films hybridized with silver nanowires
795
Improved electrical conductivity of PEDOT-based electrode films hybridized with silver nanowires
796
Improved electrical conductivity of very long multi-walled carbon nanotube bundle/poly (methyl methacrylate) composites Original Research Article
797
Improved Electrical Insulation of Rare Earth Permanent Magnetic Materials With High Magnetic Properties Original Research Article
798
Improved electrical properties of Nd-doped K0.5Bi4.5Ti4O15 thin films prepared by chemical solution deposition
799
Improved electrical properties of Pr-doped films
800
Improved electrical properties of silicon-incorporated anodic niobium oxide formed on porous Nb–Si substrate
801
Improved electrocardiographic criteri in acute myocardial infarction patients increases eligibility for prehospital thrombolysis
802
Improved electrocardiographic detection of echocardiographic left ventricular hypertrophy: results of correlated dat base approach
803
Improved electrochemical capacitive characteristics of the carbon nanotubes grown on the alumina templates with high pore density
804
Improved electrochemical immunosensor for myeloperoxidase in human serum based on nanogold/cerium dioxide-BMIMPF6/l-Cysteine composite film
805
Improved electrochemical performance of 5 V LiCoPO4 cathode materials via yttrium doping
806
Improved electrochemical performance of amorphous MnO2 modified by a novel supermolecular compound
807
Improved electrochemical performance of Li1.2Ni0.2Mn0.6O2 cathode materials by ball milling and carbon coating
808
Improved electrochemical performance of Li4Ti5O12 with a variable amount of graphene as a conductive agent for rechargeable lithium-ion batteries by solvothermal method
809
Improved electrochemical performance of LiCoO2 surface treated with Li4Ti5O12
810
Improved electrochemical performance of Li-doped natural graphite anode for lithium secondary batteries
811
Improved electrochemical performance of LiFePO4/C for lithium-ion batteries with two kinds of carbon sources
812
Improved electrochemical performance of LiNi0.5−xRhxMn1.5O4 cathode materials for 5 V lithium ion batteries via Rh-doping
813
Improved Electrochemical Performance of Lithium-Sulfur Batteries with Boron-Doped Zinc Cobalt Sulfide Catalyst-Modified Separators
814
Improved electrochemical performance of modified natural graphite anode for lithium secondary batteries
815
Improved electrochemical performance of natural honeycomb templated LiSbO3 as an anode in lithium-ion battery
816
Improved electrochemical performances of nanocrystalline LiFePO4/C composite cathode via V-doping and VO2(B) coating Original Research Article
817
Improved electrochemical properties of a coin cell using LiMn1.5Ni0.5O4 as cathode in the 5 V range
818
Improved electrochemical properties of prussian blue by multi-walled carbon nanotubes
819
Improved electrochemical storage of lithium into multi-walled carbon nanotubes by light irradiation
820
Improved electrochemistry of multi-ferrocenyl compounds: investigation of biferrocene, terferrocene, bis(fulvalene)diiron and diferrocenylethane in dichloromethane using [NBu4][B(C6F5)4] as supporting electrolyte
821
Improved electrochromic devices with an inorganic solid electrolyte protective layer
822
Improved electrochromic films of NiOx and WOxPy obtained by spray pyrolysis
823
Improved electrochromic performance of ordered macroporous tungsten oxide films for IR electrochromic device
824
Improved electrode characteristics of olivine–LiCoPO4 processed by high energy milling
825
Improved electrode systems for reverse electro-dialysis and electro-dialysis Original Research Article
826
Improved electrodeposited actinide layers
827
Improved electrodeposited actinide layers
828
Improved electroluminescence efficiency of polyfluorenes by simultaneously incorporating dibenzothiophene-S,S-dioxide unit in main chain and oxadiazole moiety in side chain
829
Improved electroluminescence from oligothiophenes
830
Improved electroluminescence performance of ZnS:Cu,Cl phosphors by ultrasonic treatment
831
Improved electromagnetic absorbing properties of Si3N4–SiC/SiO2 composite ceramics with multi-shell microstructure
832
Improved electromigration reliability of Cu films by doping and interface engineering
833
Improved electron emission characteristics of ZnO nano-gap with Pd films
834
Improved electron field emission from metal grafted graphene composites Original Research Article
835
Improved electron injection in organic LED with lithium quinolate/aluminium cathode
836
Improved electron injection into Alq3 based OLEDs using a thin lithium carbonate buffer layer
837
Improved electron injection of OLEDs with a thin PBD layer at Alq3/Cs2CO3 interface
838
Improved electron temperature model and comparison with satellite data Original Research Article
839
Improved electron-collection performance of dye sensitized solar cell based on three-dimensional conductive grid
840
Improved electronic readout system for an imaging photon detector
841
Improved electronic readout system for an imaging photon detector
842
Improved Element Erosion Function for Concrete-Like Materials with the SPH Method
843
Improved element-free Galerkin method for two-dimensional potential problems
844
Improved elimination of phase effects from background field inhomogeneities for susceptibility weighted imaging at high magnetic field strengths
845
Improved ELISA method for screening human antigen-specific IgE and its application for monitoring specific IgE for novel proteins in genetically modified foods
846
Improved ellipsoidal bound of reachable sets for time-delayed linear systems with disturbances
847
Improved emission characteristics of HCCI engine by various premixed fuels and cooled EGR
848
Improved emission stability of HfC-coated carbon nanotubes field emitters
849
Improved emission uniformity and stability of printed carbon nanotubes in electrolyte
850
Improved emotional intelligence in perioperative care through simulation-based medical education during anesthesiology residency training: a call for implementation
851
Improved empirical correlation for petroleum fraction composition quantitative prediction
852
Improved emulsification performance of corn fibre gum following maturation treatment
853
Improved emulsifying properties of soy proteins by acylation with saturated fatty acids
854
Improved emulsion stabilizing properties of whey protein isolate by conjugation with pectins
855
Improved enamine-type addition of dehydroaporphine using microwave irradiation
856
Improved enantiomer resolution and quantification of free d-amino acids in serum and urine by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry
857
Improved enantioselective analysis of polyunsaturated hydroxy fatty acids in psoriatic skin scales using high-performance liquid chromatography
858
Improved enantioselective assay for the determination of fluoxetine and norfluoxetine enantiomers in human plasma by liquid chromatography
859
Improved enantioselective conversion of styrene epoxides and meso-epoxides through epoxide hydrolases with a mutated nucleophile-flanking residue
860
Improved enantioselective synthesis of natural striatenic acid and its methyl ester
861
Improved enantioselectivity by using novel bulk bases in chiral lithium amide catalysed deprotonations: mixed dimers as reagents and catalysts
862
Improved endcapping method of monolithic silica columns
863
Improved endocardial visualization with second harmonic imaging compared with fundamental two-dimensional echocardiographic imaging
864
Improved endothelial cell adhesion and proliferation on patterned titanium surfaces with rationally designed, micrometer to nanometer features
865
Improved endothelial function by the thromboxane a2 receptor antagonist s 18886 in patients with coronary artery disease treated with aspirin
866
Improved endothelial function with metformin in type 2 diabetes mellitus
867
Improved endothelial function with metformin in type 2 diabetes mellitus
868
Improved endothelial function with metformin in type 2 diabetes mellitus: Reply
869
Improved endothelialization and reduced thrombosis by coating a synthetic vascular graft with fibronectin and stem cell homing factor SDF-1α
870
Improved endothelialization of NiTi alloy by VEGF functionalized nanocoating
871
Improved Energy Conversion for Doubly Fed Wind Generators
872
Improved energy efficiency in absorption heat pump through process modification Part I: Solvents for liquid-liquid extraction of ammonia-water mixture
873
Improved energy efficiency in absorption heat pump through process modification. Part II: Thermodynamic potential of liquid-liquid extraction of ammonia-water mixtures
874
Improved energy efficiency in juice production through waste heat recycling
875
Improved energy efficiency in sawmill drying system
876
Improved energy efficiency of the electrolytic evolution of hydrogen—Comparison of conventional and advanced electrode materials
877
Improved energy management method for auxiliary electrical energy saving in a passive-solar-heated residence
878
Improved energy management of chiller systems by multivariate and data envelopment analyses
879
Improved energy management of chiller systems with data envelopment analysis
880
Improved energy normalization function in rocket motor stability calculations
881
Improved energy output levels from small-scale Microbial Fuel Cells
882
Improved energy performance of a refrigerating machine using water spray upstream of the condenser
883
Improved energy performance of air cooled centrifugal chillers with variable chilled water flow
884
Improved energy performance of air-cooled chiller system with mist pre-cooling
885
Improved energy performance of air-cooled water chillers with innovative condenser coil configurations – Part I: CFD simulation
886
Improved energy performance of air-cooled water chillers with innovative condenser coil configurations – Part ΙΙ: Experimental validation
887
Improved energy resolution for VHE gamma ray astronomy with systems of Cherenkov telescopes
888
Improved energy storage properties of PbZrO3 thin films by inserting 0.88BaTiO3–0.12Bi(Mg1/2,Ti1/2)O3 layer
889
Improved engineering theory for uniform beams
890
IMPROVED ENHANCED STRAIN FOUR-NODE ELEMENT WITH TAYLOR EXPANSION OF THE SHAPE FUNCTIONS
891
Improved Entrance Optic for Global Irradiance Measurements with a Brewer Spectrophotometer
892
Improved entropy decay estimates for the heat equation
893
Improved environment radiation models Original Research Article
894
Improved environmental stability in poly(p-phenylene vinylene)/layered silicate nanocomposite
895
Improved enzymatic galactose oleate ester synthesis in ionic liquids
896
Improved enzymatic hydrolysis of lignocellulosic biomass through pretreatment with plasma electrolysis
897
Improved enzymatic hydrolysis of microcrystalline cellulose (Avicel PH101) by polyethylene glycol addition
898
Improved enzymatic hydrolysis yield of rice straw using electron beam irradiation pretreatment
899
Improved enzyme efficiency of rapeseed straw through the two-stage fractionation process using sodium hydroxide and sulfuric acid
900
Improved enzyme immobilization for enhanced bioelectrocatalytic activity of choline sensor and acetylcholine sensor
901
Improved enzyme immobilization for enhanced bioelectrocatalytic activity of glucose sensor
902
Improved equalization and joint iterative detection
903
Improved Equilibrium Optimizer using Density-based Population and Entropy Operator for Feature Selection
904
Improved equivalent viscous damping model for base-isolated structures with lead rubber bearings
905
Improved Erlang capacity of combined carrier channel assignment for hybrid FDMA/CDMA systems supporting voice and data services
906
Improved error bounds for Newton-like iterations under Chen-Yamamoto conditions Original Research Article
907
Improved error estimation of dynamic finite element methods for second-order parabolic equations
908
Improved error-table compensation of A/D converters
909
Improved erythrocyte lysis assay in microtitre plates for sensitive detection and efficient measurement of haemolytic compounds from ichthyotoxic algae
910
Improved ESD protection by combining InGaN-GaN MQW LEDs with GaN Schottky diodes
911
Improved esterification activity of Candida rugosa lipase in organic solvent by immobilization as Cross-linked enzyme aggregates (CLEAs)
912
Improved estimate of electron capture rates on nuclei during stellar core collapse
913
Improved estimate of the policy-relevant background ozone in the United States using the GEOS-Chem global model with 1/2° × 2/3° horizontal resolution over North America
914
Improved estimates for hydration free energy obtained by the reference interaction site model
915
Improved estimates for the approximation numbers of Hardy-type operators Original Research Article
916
IMPROVED ESTIMATES FOR THE ENERGY CHARACTERISTICS OF A VIBRATING ELASTIC STRUCTURE VIA THE INPUT IMPEDANCE AND MOBILITY: EXPERIMENTAL VERIFICATION
917
Improved Estimates of High-Temperature Fiber Bed Effective Emissivities from Variational Calculations
918
Improved Estimates of Hourly Insolation from GMS S-VISSR Data
919
Improved Estimates of Kinematic Wave Parameters for Circular Channels
920
Improved Estimates of Sombor Index
921
Improved estimates of the parameters of state space time series models
922
Improved estimates of tree-shade effects on residential energy use
923
Improved estimation in applications involving multiple independent goals
924
Improved Estimation in Measurement Error Models Through Stein Rule Procedure
925
Improved estimation in multiple linear regression models with measurement error and general constraint
926
Improved Estimation in Rayleigh type-II Censored Data under a Bounded Loss Utilizing a Point Guess Value
927
Improved estimation of a covariance matrix in an elliptically contoured matrix distribution
928
Improved estimation of accuracy in simple hypothesis versus simple alternative testing
929
Improved estimation of aerosol optical depth from MODIS imagery over land surfaces
930
Improved estimation of clutter properties in speckled imagery
931
Improved estimation of defocus blur and spatial shifts in spatial domain: a homotopy-based approach
932
Improved estimation of diffuse photosynthetically active radiation using two spectral models
933
Improved estimation of electricity demand function by integration of fuzzy system and data mining approach
934
Improved estimation of finite population median under two-phase sampling when using two auxiliary variables
935
Improved estimation of f-ratio in natural phytoplankton assemblages
936
Improved estimation of GFR by serum cystatin C in patients undergoing cardiac catheterization
937
Improved estimation of hyperbolic frequency modulated chirp signals
938
Improved estimation of induction machine parameters
939
IMPROVED ESTIMATION OF MEAN IN RANDOMIZED RESPONSE MODELS
940
Improved estimation of PM2.5 using Lagrangian satellite-measured aerosol optical depth
941
Improved estimation of population mean under two-phase sampling with subsampling the non-respondents
942
Improved estimation of regression parameters in measurement error models
943
Improved estimation of software project effort using multiple additive regression trees
944
Improved estimation of surface solar insolation using a neural network and MTSAT-1R data
945
Improved estimation of the covariance matrix of stock returns with an application to portfolio selection
946
IMPROVED ESTIMATION OF THE EXPECTED KULLBACK-LEIBLER DISCREPANCY IN CASE OF MISSPECIFICATION
947
IMPROVED ESTIMATION OF THE EXPECTED KULLBACK-LEIBLER DISCREPANCY IN CASE OF MISSPECIFICATION
948
Improved estimation of the scale parameter, the hazard rate parameter and the ratio of the scale parameters in exponential distributions: An integrated approach
949
Improved estimation of the slope parameter in a linear ultrastructural model when measurement errors are not necessarily normal
950
Improved estimation of the slope parameter in a linear ultrastructural model when measurement errors are not necessarily normal
951
Improved Estimation of the Soil Particle-size Distribution from Textural Data
952
Improved estimation performance using known linear constraints
953
Improved estimators for constrained Markov chain models
954
Improved estimators for fractional Brownian motion via the expectation–maximization algorithm
955
Improved estimators for simultaneous estimation of variance components
956
Improved estimators for the common mean and ordered means of two normal distributions with ordered variances
957
Improved estimators for the standard deviations of horizontal wind fluctuations
958
Improved estimators of energy models
959
Improved etch and deposit
960
Improved etching characteristics of silicon-dioxide by enhanced inductively coupled plasma
961
Improved ethanol fermentation by heterologous endoinulinase and inherent invertase from inulin by Saccharomyces cerevisiae
962
Improved ethanol production from various carbohydrates through anaerobic thermophilic co-culture
963
Improved ethanol tolerance and ethanol production from glycerol in a streptomycin-resistant Klebsiella variicola mutant obtained by ribosome engineering
964
Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis
965
Improved evaluation of potential allergens in GM food
966
Improved evaporative flux partitioning and carbon flux in the land surface model JULES: Impact on the simulation of land surface processes in temperate Europe
967
Improved event-related potential signs of selective attention after the administration of the cholecystokinin analog ceruletide in healthy persons
968
Improved evidence for the existence of an intermediate phase during hydration of tricalcium silicate
969
Improved evolutionary programming with dynamic mutation and metropolis criteria for multi-objective reactive power optimisation
970
Improved exact algorithms for MAX-SAT Original Research Article
971
Improved exclusion limits from the EDELWEISS WIMP search
972
Improved exercise tolerance and cardiac function in severe chronic heart failure patients undergoing a supervised exercise program
973
Improved experimental characterization of crystallization kinetics
974
Improved explicit equations for estimation of the friction factor in rough and smooth pipes
975
Improved explicit estimates on the number of solutions of equations over a finite field
976
Improved exploration in Hopfield network state-space through parameter perturbation driven by simulated annealing
977
Improved -exponential and -trigonometric functions
978
Improved exponential stability analysis for delayed recurrent neural networks
979
Improved exposure of isolated perimembranous ventricular septal defects
980
Improved exposure of the pulmonary arteries for thromboendarterectomy
981
IMPROVED EXPRESSION FOR THE AVERAGE BEP OF MC-CDMA SYSTEMS WITH MRC DIVERSITY RECEPTION
982
Improved expression of charge-carrier mobility in disordered semiconducting polymers considering dependence on temperature, electric field and charge-carrier density
983
Improved extracellular phytase activity in Saccharomyces cerevisiae by modifications in the PHO system
984
Improved extraction and clean-up of imidazolinone herbicides from soil solutions using different solid-phase sorbents
985
Improved extraction and identification by ultra performance liquid chromatography tandem mass spectrometry of phenolic compounds in burdock leaves
986
Improved extraction method for effective channel length of deep-submicrometre MOSFETs
987
IMPROVED EXTRACTION OF COUPLING MATRIX AND UNLOADED Q FROM S-PARAMETERS OF LOSSY RESONATOR FILTERS
988
Improved extraction of green tea components from teabags using the microwave oven
989
Improved extraction of green tea components from teabags using the microwave oven
990
Improved extraction of I–V curves from low-energy electron diffraction images
991
Improved extraction of metallofullerenes with DMF at high temperature Original Research Article
992
Improved extraction of oil from chickpea under ultrasound in a dynamic system Original Research Article
993
Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves
994
Improved extraction of vegetable oils under high-intensity ultrasound and/or microwaves
995
Improved extraction of virgin olive oil using calcium carbonate as coadjuvant extractant Original Research Article
996
Improved extraction procedures for polychlorinated biphenyls in solid samples with aqueous sodium hydroxide under autoclave conditions
997
Improved Extraction-Separation of Lanthanum/ Europium Ions by Bis(2-ethylhexyl)phosphoric Acid Using 12-Crown-4 as an Ion Selective Masking Agent
998
Improved extrapolation techniques in recursive digital filtering: a comparison of least squares and prediction
999
Improved extremal optimization for the asymmetric traveling salesman problem
1000
Improved extreme learning machine for multivariate time series online sequential prediction