ليست عنوان مقالات لاتين Improved oxidation resistance of TiAlN coatings by doping with Si or B Improved synthesis of di- and trinuclear iron carbonyl complexes containing bridging diphenylethenyl ligand.: X-ray structure of [PPh4][Fe2(CO)6(μ-CO)(μ-PhCCHPh)]

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Improved oxidation resistance of TiAlN coatings by doping with Si or B

2

Improved oxides for production of lead/acid battery plates

3

Improved oxygen barrier performance of poly(vinyl alcohol) films through hydrogen bond complex with poly(methyl vinyl ether-co-maleic acid)

4

Improved oxygen delivery by positive pressure ventilation with continuous negative external chest pressure

5

Improved oxygen permeability of Ce0.8Sm0.2O2−δ–PrBaCo2O5+δ dual-phase membrane by surface-modifying porous layer

6

Improved oxygen reduction activity on the Ih Cu@Pt core–shell nanoparticles

7

Improved oxygen storage capacity on CeO2/zeolite hybrid catalysts. Application to VOCs catalytic combustion

8

Improved oxygen systems for childhood pneumonia: a multihospital effectiveness study in Papua New Guinea

9

Improved oxygen tolerance of the Synechocystis sp. PCC 6803 bidirectional hydrogenase by site-directed mutagenesis of putative residues of the gas diffusion channel

10

Improved oxygen-sensing characteristics based on (TiO2)x(NbO2.5)1−x composite

11

Improved oxytetracycline production in Streptomyces rimosus M4018 by metabolic engineering of the G6PDH gene in the pentose phosphate pathway

12

Improved p charts to monitor process quality

13

Improved p charts to monitor process quality

14

Improved P2 phenylglycine-based hepatitis C virus NS3 protease inhibitors with alkenylic prime-side substituents Original Research Article

15

Improved Paclitaxel and Baccatin III Production in Suspension Cultures of Taxus media

16

Improved Pain Control with Combination Spinal Cord Stimulator Therapy Utilizing Sub-perception and Traditional Paresthesia Based Waveforms: A Pilot Study

17

Improved pair-potential function for diatomic systems

18

Improved parallel implementation of the two-dimensional Ising model Original Research Article

19

Improved Parallel Integer Sorting without Concurrent Writing

20

Improved parallel QR method for large least squares problems involving Kronecker products

21

Improved parallel-iterated pseudo two-step RK methods for nonstiff IVPs Original Research Article

22

Improved parallelization techniques for the density matrix renormalization group Original Research Article

23

Improved parameter identification using additional spectral information

24

Improved parameterization of dust emission (PM10) fluxes by the gradient method using the Naiman tower data at the Horqin desert in China Original Research Article

25

Improved parametric empirical determination of module short circuit current for modelling and optimization of solar photovoltaic systems

26

Improved parametric time warping for proteomics

27

Improved Particle Filter for Target Tracking

28

Improved particle filters for multi-target tracking

29

Improved particle fusing geometric relation between particles in FastSLAM

30

Improved particle identification using cluster counting in a full-length drift chamber prototype

31

Improved particle identification using cluster counting in a full-length drift chamber prototype

32

Improved particle plug valve for Geldart-D powders

33

Improved particle scavenging by a combination of ultrasonics and water sprays

34

improved particle swarm optimization based distributed energy-efficient opportunistic algorithm for clustering and routing in wsns

35

Improved particle swarm optimization combined with chaos

36

Improved particle swarm optimization for combined heat and power economic dispatch

37

Improved particle swarm optimization for combined heat and power economic dispatch

38

Improved particle swarm optimization to minimize periodic preventive maintenance cost for series-parallel systems

39

Improved Particle Swarm Optimization with Disturbance Term for Multi-machine Power System Stabilizer Design

40

Improved partition efficiency with threaded cylindrical column in vortex counter-current chromatography

41

Improved Passive Flux Samplers for Measuring Ammonia Emissions from Animal Houses, Part 1: Basic Principles

42

Improved Passive Flux Samplers for measuring Ammonia Emissions from Animal Houses, Part 2: Performance of Different Types of Sampler as a Function of Angle of Incidence of Airflow

43

Improved patency in vein grafts harvested with surrounding tissue: results of a randomized study using three harvesting techniques

44

Improved patency of infrainguinal polytetrafluoroethylene bypass grafts using a distal Taylor vein patch

45

Improved patient outcome after surgical treatment for loculated empyema

46

Improved patient outcome after surgical treatment for loculated empyema

47

Improved patient outcome after surgical treatment for loculated empyema

48

Improved Pattern Clustering Algorithm for Recognizing Transversal Distribution of Steel Strip Thickness Original Research Article

49

Improved PCA Algorithm for Face Recognition

50

Improved PCR detection of Campylobacter jejuni from chicken rinses by a simple sample preparation procedure

51

Improved PCR detection of potyviruses in Allium species

52

Improved PCR-based Assays for Pre-symptomatic Diagnosis of Light Leaf Spot and Determination of Mating Type of Pyrenopeziza Brassicae on Winter Oilseed Rape

53

Improved Pd/γ-Al2O3–Ce catalysts for benzene combustion

54

Improved PDP Sustainers for Reducing Current Stress and Non-Linear Effect

55

Improved peak selection strategy for automatically determining minute compositional changes in fuels by gas chromatography–mass spectrometry

56

Improved Peanut Flour for a Reduced-Fat Peanut Butter Product

57

Improved pebbling bounds

58

Improved Pena–Rodriguez portmanteau test

59

Improved Peňa–Rodriguez portmanteau test

60

Improved peptide fractionation by electrodialysis with ultrafiltration membrane: Influence of ultrafiltration membrane stacking and electrical field strength

61

Improved peptide mass fingerprinting matches via optimized sample preparation in MALDI mass spectrometry Original Research Article

62

Improved peptide vaccine strategies, creating synthetic artificial infections to maximize immune efficacy

63

Improved perceived general health is observed with prosthodontic treatment

64

Improved perceived general health is observed with prosthodontic treatment

65

Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications

66

Improved Performance Analysis of Single-phase Line Start Synchronous Reluctance Motor Derived from Induction Motor

67

Improved performance and cost reduction of RO seawater systems using UF pretreatment

68

Improved performance and quantitative detection of copro-antigens by a monoclonal antibody based ELISA to diagnose human opisthorchiasis

69

Improved performance and stability by an Al/Ni bilayer cathode in organic light-emitting diodes

70

Improved performance and student satisfaction after implementation of a problem-based preclinical obstetrics and gynecology curriculum

71

Improved performance from GaAs–AlGaAs quantum cascade lasers with enhanced upper laser level confinement

72

Improved performance in green light-emitting diodes made with CdSe-conjugated polymer composite

73

Improved performance in silicon enzyme microreactors obtained by homogeneous porous silicon carrier matrix

74

Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy

75

Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy

76

Improved performance in TD-CDMA mobile radio system by optimizing energy partition in channel estimation

77

Improved performance lead iodide nuclear radiation detectors

78

Improved performance lead iodide nuclear radiation detectors

79

Improved performance mechanism of III–V compound triple-junction solar cell using hybrid electrode structure

80

Improved performance of a cellulose-based anion exchanger with tertiary amine functionality for the adsorption of chromium(VI) from aqueous solutions

81

Improved performance of a dye-sensitized solar cell using a TiO2/ZnO/Eosin Y electrode

82

Improved performance of a metal hydride electrode for nickel/metal hydride batteries through copper-coating

83

Improved performance of a tubular microbial fuel cell with a composite anode of graphite fiber brush and graphite granules

84

Improved performance of aminopropylsilatrane over aminopropyltriethoxysilane as a linker for nanoparticle-based plasmon resonance sensors

85

Improved performance of ammonia-fueled solid oxide fuel cell with SSZ thin film electrolyte and Ni-SSZ anode functional layer

86

Improved performance of an activated multi-walled carbon nanotube polymer actuator, compared with a single-walled carbon nanotube polymer actuator

87

Improved performance of an engineering model cryogen free double adiabatic demagnetization refrigerator Original Research Article

88

Improved performance of Black-dye-sensitized solar cells with nanocrystalline anatase TiO2 photoelectrodes prepared from TiCl4 and ammonium carbonate

89

Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay

90

Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay

91

Improved performance of carbon nanotube buckypaper and ionic-liquid-in-Nafion actuators for rapid response and high durability in the open air

92

Improved performance of CdTe thin film solar cells through controlling the initial stage of the CdTe layer deposition by close-spaced sublimation

93

IMPROVED PERFORMANCE OF CIRCULARLY POLARIZED ANTENNA USING SEMI-PLANAR CHIRAL METAMATERIAL COVERS

94

Improved Performance of Companded OFDM System using Non Symmetric Approach

95

Improved performance of composite nanofiltration membranes by adding calcium chloride in aqueous phase during interfacial polymerization process

96

Improved performance of comprehensive two-dimensional HPLC separation of traditional Chinese medicines by using a silica monolithic column and normalization of peak heights

97

Improved performance of cross-flow ultrafiltration for the recovery and purification of Ca2+ conditioned lipopeptides in diafiltration mode of operation

98

Improved performance of Cu(In,Ga)Se2-based submodules with a stacked structure of ZnO window prepared by sputtering

99

Improved performance of dye-sensitized solar cells with compact TiO2 blocking layer prepared using low-temperature reactive ICP-assisted DC magnetron sputtering

100

Improved performance of dye-sensitized solar cells with surface-treated TiO2 as a photoelectrode

101

Improved performance of dye-sensitized solar cells: An TiO2–nano-SiO2 hybrid photoanode with post-treatment of TiCl4 aqueous solution

102

Improved performance of gravitational field-flow fractionation for screening wine-making yeast varieties

103

Improved performance of Li hybrid solid polymer electrolyte cells

104

Improved performance of lithium-ion cells with the use of fluorinated carbonate-based electrolytes

105

Improved performance of magnetically recoverable Ce-promoted Ni/Al2O3 catalysts for aqueous-phase hydrogenolysis of sorbitol to glycols

106

Improved performance of MEH-PPV/ZnO solar cells by addition of lithium salt

107

Improved performance of microbial fuel cells enriched with natural microbial inocula and treated by electrical current

108

Improved performance of micro-fabricated preconcentrators using silica nanoparticles as a surface template

109

Improved Performance of Multistage Lattice Vector Quantization with Hybrid Lattice Structure

110

Improved performance of organic light emitting diodes by pentacene as hole transporting layer

111

Improved performance of organic light-emitting diodes using advanced hole-transporting materials

112

Improved performance of organic light-emitting diodes with cesium chloride inside tris (8-hydroxyquinoline) aluminum

113

Improved Performance of PAN-based UF Membrane with PAN-g-PVA Amphiphilic Copolymer

114

Improved performance of Pd electrocatalyst supported on ultrahigh surface area hollow carbon spheres for direct alcohol fuel cells

115

Improved performance of polyaniline-uricase biosensor Original Research Article

116

Improved performance of porous bio-anodes in microbial electrolysis cells by enhancing mass and charge transport

117

Improved Performance of Preordered Fungal Protease—Stearic Acid Biocomposites: Enhanced Catalytic Activity, Reusability, and Temporal Stability

118

Improved performance of protein separation by continuous annular chromatography in the size-exclusion mode

119

Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems

120

Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems

121

Improved performance of Raney nickel electrode by the addition of electrically conductive materials for hydrogen oxidation reaction

122

Improved performance of rechargeable alkaline batteries via surfactant-mediated electrosynthesis of MnO2

123

Improved performance of reverse osmosis with dynamic layers onto membranes in separation of concentrated salt solutions

124

Improved performance of secondary heat exchanger for latent heat recovery from flue gas using mini-tubes

125

Improved performance of Si-based top-emitting organic light-emitting device using MoOx buffer layer

126

Improved Performance of Soil Microbial Fuel Cell by Adding Earthworms

127

Improved performance of solid-state dye-sensitized solar cells with p/p-type nanocomposite electrolyte

128

Improved performance of solution-processable OLEDs by silyl substitution to phosphorescent iridium complexes

129

Improved Performance of Subballast Stabilized Using Geocell for High Speed Train

130

Improved performance of the anion-exchange centrifugation technique for studies with human infective African trypanosomes

131

Improved performance of the greedy algorithm for partial cover

132

Improved performance of the JAERI injection and free electron laser system

133

Improved performance of the JAERI injection and free electron laser system

134

Improved performance of the microbial electrolysis desalination and chemical-production cell using the stack structure

135

Improved performance of the natural-gas-sweetening Benfield-HiPure process using process simulation

136

Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells

137

Improved performance of TiO2 in the selective photo-catalytic oxidation of cyclohexane by increasing the rate of desorption through surface silylation

138

Improved performance of Yarrowia lipolytica lipase-catalyzed kinetic resolution of (R,S)-2-octanol by an integrated strategy of interfacial activation, bioimprinting and immobilization

139

Improved performance of ZnO nanostructured bulk heterojunction organic solar cells with nanowire-density modified by yttrium chloride introduction into solution

140

Improved performance using tungsten carbide/carbon nanofiber based anode catalysts for alkaline direct ethanol fuel cells

141

Improved Performances and Control of Beer Fermentation Using Encapsulated oc-Acetolactate Decarboxylase and Modeling

142

Improved performances in top-emitting organic light-emitting diodes based on a semiconductor zinc oxide buffer layer

143

Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia

144

Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia

145

Improved performances of red organic light-emitting devices by co-doping a rubrene derivative and DCJTB into tris-(8-hydroxyquinoline) aluminum host

146

Improved performances of the fast reactor calculational system ERANOS-ERALIB1 due to improved a priori nuclear data and consideration of additional specific integral data

147

Improved performances of the wind inlet of the Savonius rotor

148

Improved perfusion and contractile reserve after transmyocardial laser revascularization in a model of hibernating myocardium

149

Improved perinatal survival of monoamniotic twins with intensive inpatient monitoring

150

Improved permeate flux by flocculation of biological feeds: comparison between theory and experiment

151

Improved permeation performance of Pluronic F127–polyethersulfone blend ultrafiltration membranes

152

Improved Perovskite Solar Cell Performance Using Semitransparent CNT Layer

153

Improved personalized e-course Composition Approach using Modified Particle Swarm Optimization with Inertia- Coefficient

154

Improved perturbation estimates for the matrix equations X±A*X−1A=Q

155

Improved perturbation method and its application to the IIB matrix model Original Research Article

156

Improved pharmacokinetics, biodistribution and necrosis in vivo using a new near infra-red photosensitizer: tetrahydroporphyrin tetratosylat

157

Improved phase boundary for one-component vapor-liquid equilibrium: incorporating critical behavior and cubic equations of state

158

Improved phase stability and electrochemical performance of (Y,In,Ca)BaCo3ZnO7+δ cathodes for intermediate temperature solid oxide fuel cells

159

Improved phase vocoder time-scale modification of audio

160

Improved phase-change characteristics of Si doped GeSbTe thin films used for phase change memory

161

Improved phase-contrast flow quantification by three-dimensional vessel localization

162

Improved phase-coordinate Gauss-Seidel load flow algorithm

163

Improved phenol decomposition and simultaneous regeneration of granular activated carbon by the addition of a titanium dioxide catalyst under a dielectric barrier discharge plasma Original Research Article

164

Improved phenomenological model for an isothermal winemaking fermentation

165

Improved phenomenological renormalization schemes

166

Improved phosphorous gettering of multicrystalline silicon

167

Improved photo – Hydrogen production by transposon mutant of Rhodobacter capsulatus with reduced pigment

168

Improved photocatalytic activity and adsorption ability of mesoporous potassium-intercalated layered titanate

169

Improved photocatalytic activity of g-C3N4/TiO2 composites prepared by a simple impregnation method

170

Improved photocatalytic activity of highly ordered TiO2 nanowire arrays for methylene blue degradation

171

Improved photocatalytic activity of single crystal ZnO nanorod derived from highly effective P/N heterojunction

172

Improved photo-catalytic activity of single-crystalline TiO2 nanowires surrounded by Pt cube nanoparticles

173

Improved photocatalytic activity of Sn4+-doped and undoped TiO2 thin film coated stainless steel under UV- and VIS-irradiation Original Research Article

174

Improved photocatalytic and antibacterial activities of three-dimensional polycrystalline anatase TiO2 photocatalysts Original Research Article

175

Improved photocatalytic and gas sensing properties of α-Fe2O3 nanoparticles derived from β-FeOOH nanospindles

176

Improved Photocatalytic Degradation of Pharmaceutical Compounds from Aqueous Solutions Using Pd/Zno Nanocomposite as a Model of Environmental Applications

177

Improved photocatalytic deposition of palladium membranes

178

Improved photocatalytic hydrogen generation on Zn2GeO4 nanorods with high crystallinity

179

Improved photocatalytic performance of Pd-doped ZnO

180

Improved Photocatalytic Performance of ZnO through AgCu Bimetal Coupling for the Photodegradation of Nitrobenzene

181

Improved photoconversion from MoSe2 based PEC solar cells

182

Improved photodegradation activity of TiO2 via decoration with SnS2 nanoparticles

183

Improved photoelectrochemical detection of mercury (II) with a TiO2-modified composite photoelectrode

184

Improved photographic production of Pt nano-particles for fuel cell electrodes

185

Improved photoluminescence efficiency of films from conjugated polymers

186

Improved photoluminescence of BaMgAl10O17 blue phosphor prepared by spray pyrolysis

187

Improved photoluminescence of green-emitting phosphor Ca3Sc2Si3O12:Ce3+ for white light emitting diodes

188

Improved photoluminescence of ZnS:Mn nanocrystals by microwave assisted growth of ZnS shell

189

Improved photoluminescence properties of a new green SrB2O4:Tb3+ phosphor by charge compensation

190

Improved photoluminescence properties of oxidized anodically etched porous Zn

191

Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features

192

Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features

193

Improved photoreceptor decay characteristics of vanadyl-phthalocyanine films annealed under magnetic field

194

Improved photostability of hydrophobic natural dye incorporated in organo-modified hydrotalcite Original Research Article

195

Improved Photostabilization of Chlorpyrifos Insecticide with Novel Benzil Derivatives

196

Improved phototrophic H2 production with Rhodopseudomonas palustris WP3-5 using acetate and butyrate as dual carbon substrates

197

Improved photovoltaic effect of polymer solar cells on planarized 2D photonic crystals

198

Improved photovoltaic effect of polymer solar cells with nanoscale interfacial layers

199

Improved photovoltaic energy output for cloudy conditions with a solar tracking system

200

Improved photovoltaic method for measurement of minority carrier diffusion length applied to silicon solar cells

201

Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT

202

Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT

203

Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells

204

Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells

205

Improved photovoltaic properties of pentacene/N,N′-Dioctyl-3,4,9,10-perylenedicarboximide-based organic heterojunctions with thermal annealing

206

Improved photovoltaic self-consumption with appliance scheduling in 200 single-family buildings

207

Improved Physical and Mental Health After a Combined Lifestyle Intervention with Cognitive Behavioural Therapy for Obesity

208

Improved physicochemical characteristics of artemisinin-nicotinamide solid dispersions by solvent evaporation and freeze dried methods

209

Improved physicochemical properties and biocompatibility of stainless steel implants by PVA/ZrO2-based composite coatings

210

Improved Physicochemical Properties of Tapioca Starch / Bovine Gelatin Biodegradable Films with Zinc Oxide Nanorod

211

Improved phytase production by a thermophilic mould Sporotrichum thermophile in submerged fermentation due to statistical optimization

212

Improved phytoaccumulation of cadmium by genetically modified tobacco plants (Nicotiana tabacum L.). Physiological and biochemical response of the transformants to cadmium toxicity

213

Improved PID method of temperature control for adiabatic demagnetization refrigerators

214

Improved PID method of temperature control for adiabatic demagnetization refrigerators

215

Improved piezoelectric ceramic/polymer composites for hydrophone applications

216

Improved piezoelectric properties via mechano-chemical activation in modified PCT ceramics

217

Improved piezoelectric switch shunt damping technique using negative capacitance

218

Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio

219

Improved PIN diode circuit model with automatic parameter extraction technique

220

Improved p–i–n solar cells structure for narrow bandgap a-Si:H prepared by Ar* chemical annealing at high temperatures

221

Improved pinhole spatial filter

222

Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam

223

Improved plant growth with rock phosphate solubilized by Aspergillus niger grown on sugar-beet waste

224

Improved Plant Regeneration from Cell Suspensions of Commercial Cultivars, Breeding- and Inbred Lines of Perennial Ryegrass (Lolium perenne L.)

225

Improved plastic anisotropy of Mg–Zn–Ca alloys exhibiting high-stretch formability: A first-principles study

226

Improved plasticity and corrosion behavior in Ti–Zr–Cu–Pd metallic glass with minor additions of Nb: An alloy composition intended for biomedical applications

227

Improved plasticity and fracture toughness in metallic glasses via surface crystallization

228

Improved plasticity of bulk metallic glasses by electrodeposition

229

Improved plasticity of iron-based high-strength bulk metallic glasses by copper-induced nanocrystallization

230

Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations

231

Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations

232

Improved platinization conditions produce a 60-fold increase in sensitivity of amperometric biosensors using glucose oxidase immobilized in poly-o-phenylenediamine

233

Improved Platinum-Group Element Extraction by NiS Fire Assay from Chromitite Ore Samples Using a Flux Containing Sodium Metaphosphate

234

Improved PLS regression based on SVM classification for rapid analysis of coal properties by near-infrared reflectance spectroscopy

235

Improved Poincaré inequalities with weights ✩

236

Improved point and interval estimation for a beta regression model

237

Improved point center algorithm for K-Means clustering to increase software defect prediction

238

Improved Poisson Intensity Estimation: Denoising Application Using Poisson Data

239

Improved polarization-mode-dispersion tolerance in duobinary transmission

240

Improved poloidal convergence of the MARS code for MHD stability analysis Original Research Article

241

Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC

242

Improved polyHEMA–DAQ films for the optical analysis of nitrite

243

Improved polymer nanocomposite dielectric breakdown performance through barium titanate to epoxy interface control

244

Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt

245

Improved polynomial approximations for the solution of nonlinear integral equations

246

Improved polynomialalgorithmsforrobustbottleneckproblemswithintervaldata

247

Improved poly-γ-glutamic acid production by chromosomal integration of the Vitreoscilla hemoglobin gene (vgb) in Bacillus subtilis

248

Improved Population Health in Iran from 1979 to 2019; Decreasing Mortality Rates and Increasing Life Expectancy

249

Improved pore space structure characterization by fusion of relaxation tomography maps

250

Improved porous silicon microarray based prostate specific antigen immunoassay by optimized surface density of the capture antibody Original Research Article

251

Improved Pose Estimation for Mobile Robots by Fusion of Odometry Data and Environment Map

252

Improved position for the flexible laryngeal mask

253

Improved positive electrospray ionization of patulin by adduct formation: Usefulness in liquid chromatography–tandem mass spectrometry multi-mycotoxin analysis

254

Improved Possibilistic C-Means Clustering Algorithms

255

Improved posterobasal segment function after thrombolysis is associated with decreased incidence of significant mitral regurgitation in first inferior myocardial infarction

256

Improved post-myocardial infarction survival with probucol in rats: Effects on left ventricular function, morphology, cardiac oxidative stress and cytokine expression

257

Improved potassium-selective membrane using valinomycin as ionophore for ion-selective microdevices

258

Improved potential function for HOO−/OOH− isomerization

259

Improved potentiometric response of all-solid-state Pb2+-selective electrode

260

Improved potentiometric response of solid-contact lanthanum (III) selective electrode Original Research Article

261

Improved powder X-ray data for cancrinites IV: Franzinite

262

Improved powder X-ray data for the cement phase Ca12O32F2 (C11A7f)

263

Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive

264

Improved power factor in a low-cost PWM single phase inverter using genetic algorithms

265

Improved power generation performance of solid oxide fuel cells using doped LaGaO3 electrolyte films prepared by screen printing method II. Optimization of Ni–Ce0.8Sm0.2O1.9 cermet anode support

266

Improved power quality converter fed permanent magnet AC motor for air-conditioning

267

Improved power quality in a single-phase PWM inverter voltage with bipolar notches through the hybrid genetic algorithms

268

Improved Power System Dynamic Stability by DFIG in the Presence of SSSC Using Adaptive Nonlinear Multi-Input Backstepping

269

Improved precipitation of gibbsite from sodium aluminate solution by adding methanol

270

Improved precision of virtual height measurements with coherent radio pulse sounding based on the maximum likelihood method Original Research Article

271

Improved Precoding Method for PAPR Reduction in OFDM with Bounded Distortion

272

Improved pre-concentration and detection methods for volatile sulphur breath constituents

273

Improved Prediction and Mapping of Soil Copper by Kriging with Auxiliary Data for Cation-Exchange Capacity

274

Improved prediction and tracking of volcanic ash clouds

275

Improved prediction of biomass composition for switchgrass using reproducing kernel methods with wavelet compressed FT-NIR spectra

276

Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm

277

Improved prediction of early-onset coronary artery disease using APOE ε4, BChE-K, PPARγ2 Pro12 and ENOS T-786C in a polygenic model

278

Improved prediction of proximal femoral fracture load using nonlinear finite element models

279

Improved Prediction of Signal Peptides: SignalP 3.0

280

Improved prediction of simultaneous local and overall buckling of stiffened panels

281

Improved prediction of springback on final formed components

282

Improved prediction of stability lobes with extended multi frequency solution

283

Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate

284

Improved prediction of turbulent separated flow with a low-Reynolds-number Nonlinear κ − ε model

285

Improved predictions of equatorial TEC for real time applications Original Research Article

286

Improved predictions of saturated and unsaturated zone drawdowns in a heterogeneous unconfined aquifer via transient hydraulic tomography: Laboratory sandbox experiments

287

Improved predictions of the standard model and the detection of new physics in neutron beta decay

288

Improved predictions penalizing both slope and curvature in additive models

289

IMPROVED PREDICTIVE POWER CONTROL OF CDMA SYSTEM IN RAYLEIGH FADING CHANNEL

290

Improved predictor–corrector method for solving fuzzy initial value problems

291

Improved predictors in survey sampling under a super population model

292

Improved pregnancy rates for obese, infertile women following a group treatment program an open pilot study

293

Improved preliminary test and Stein-rule Liu estimators for the ill-conditioned elliptical linear regression model

294

Improved preparation and structural investigation of 4-aryl-4-oxo-2-hydroxy-2-butenoic acids and methyl esters

295

Improved preparation and synthetic uses of 3-deoxy-d-arabino-hexonolactone: an efficient synthesis of Leptosphaerin

296

Improved preparation of (±)-(1,3/2,4)-5-cyclohexene-1,2,3,4-tetrol [(±)-conduritol-B] and its reaction with hydrobromic and hydrochloric acid; synthesis and characterisation of some (±)-1-deoxy-1-halo- and (±)-1,4-dideoxy-1,4-dihaloconduritols

297

Improved preparation of 2,3:5,6:3′,4′-tri-O-isopropylidenelactose dimethyl acetal and its 6′-O-(1-methoxy-1-methylethyl) derivative

298

Improved preparation of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3,3,1] nonane (DPT) from urea

299

Improved preparation of alkyl 2-(3-indolyl)-3-nitroalkanoates under fully heterogeneous conditions: stereoselective synthesis of alkyl (E)-2-(3-indolyl)-2-alkenoates

300

Improved preparation of immobilized trypsin on superparamagnetic nanoparticles decorated with metal ions

301

Improved preparation of indenyl molybdenum(II) and tungsten(II) compounds

302

Improved Preparation of Macroporous, Chlorosulfonated Poly(styrene-co-divinylbenzene) and Conversion to Sulfonamides and Sulfonylhydrazines

303

Improved preparation of membrane surfaces for field-emission scanning electron microscopy

304

Improved preparation of perallylated cyclodextrins: facile synthesis of cyclodextrin-based polycationic and polyanionic compounds Original Research Article

305

Improved preparation of polybenzo[c]thiophene-modified electrodes employing p-toluenesulfonate as dopant anion

306

Improved preparation of small biological samples for mercury analysis using cold vapor atomic absorption spectroscopy

307

Improved preparation of tosyldiazomethane

308

Improved preparative route toward 3-arylcyclopropenes

309

Improved pretreatment of lignocellulosic biomass using enzymatically-generated peracetic acid

310

Improved Price Indexes for Real Estate: Measuring the Course of Swedish Housing Prices

311

Improved principal component monitoring using the local approach

312

Improved principal component monitoring of large-scale processes

313

Improved priority access, bandwidth allocation and traffic scheduling for DOCSIS cable networks

314

Improved probabilistic method for power system dynamic stability studies

315

Improved probabilistic quantification of drift demands for seismic evaluation

316

Improved probiotic viability in stress environments with post-culture of alginate–chitosan microencapsulated low density cells

317

Improved procedural results of coronary stenting with focal balloon “overexpansion” — final core lab analysis from the prospective, multicenter OSTI-2 trial

318

Improved procedure for cyclization of vinyl azides into 3-substituted-2H-azirines

319

Improved procedure for equivalent linearization of bridges supported on hysteretic isolators

320

Improved procedure for obtaining statistically valid parameter estimates from soil respiration data

321

Improved procedure for obtaining statistically valid parameter estimates from soil respiration data

322

Improved procedure for screening expression libraries for novel autoantigens

323

Improved procedure for the computation of Lamb’s coefficients in the physalis method for particle simulation

324

Improved procedure for the determination of malonaldehyde by gas-chromatography with electron-capture detection as 2,4,6-trichlorophenylhydrazine derivative

325

Improved procedure for the enantioselective synthesis of dihydrooxazolo and dihydrothiazolo ring-fused 2-pyridones

326

Improved procedure for the hydrotelluration of alkynes

327

Improved procedure for the room temperature asymmetric phase-transfer mediated epoxidation of α,β-unsaturated ketones

328

Improved procedure for the separation of major stratum corneum lipids by means of automated multiple development thin-layer chromatography

329

Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent

330

Improved procedure for the the determination of rofecoxib in human plasma involving 96-well solid-phase extraction and fluorescence detection

331

Improved procedures for the Beckmann rearrangement: the reaction of ketoxime carbonates with boron trifluoride etherate

332

Improved procedures for the laboratory study of high-temperature viscoelastic relaxation

333

Improved procedures for the selective chemical fragmentation of rhamnogalacturonans Original Research Article

334

Improved Process Design and Quality for Gear Manufacturing with Flat and Round Rolling

335

Improved process for decontamination of whey by a continuous flow-through pulsed light system

336

Improved Process for Floodplain Delineation from Digital Terrain Models

337

Improved Process for the Enantioselective Hydrolysis of Prochiral Diethyl Malonates Catalyzed by Pig Liver Esterase

338

Improved process for the production of cellulose sulfate using sulfuric acid/ethanol solution

339

Improved process for the TlBr single-crystal detector

340

Improved process for the TlBr single-crystal detector

341

Improved process monitoring and supervision based on a reliable multi-stage feature-based pattern recognition technique

342

Improved processes of light hydrocarbon separation from LNG with its cryogenic energy utilized

343

Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids

344

Improved processing of carbon nanotube/magnesium alloy composites

345

Improved processing of harmonics and interharmonics by time-domain averaging

346

Improved production by fed-batch cultivation and some properties of Cu/Zn-superoxide dismutase from the fungal strain Humicola lutea 103

347

Improved production of alkaline protease from a mutant of alkalophilic Bacillus pantotheneticus using molasses as a substrate

348

Improved production of butyl butyrate with lipase from Thermomyces lanuginosus immobilized on styrene–divinylbenzene beads

349

Improved production of chitin from shrimp waste by fermentation with epiphytic lactic acid bacteria

350

Improved production of heterologous lipase in Trichoderma reesei by RNAi mediated gene silencing of an endogenic highly expressed gene

351

Improved production of l-asparaginase by Bacillus brevis cultivated in the presence of oxygen-vectors

352

Improved production of mycelial biomass and ganoderic acid by submerged culture of Ganoderma lucidum SB97 using complex media

353

Improved Production of Pharmacologically-active Sclerotiorin by Penicillium sclerotiorum

354

Improved production of phenylethanoid glycosides by Cistanche deserticola cells cultured in an internal loop airlift bioreactor with sifter riser

355

Improved production of p-hydroxycinnamic acid from tyrosine using a novel thermostable phenylalanine/tyrosine ammonia lyase enzyme

356

Improved Production of Recombinant Human Activin A in Escherichia coli

357

Improved production of reducing sugars from rice husk and rice straw using bacterial cellulase and xylanase activated with hydroxyapatite nanoparticles

358

Improved Production of Rhamnolipids by a Pseudomonas aeruginosa Mutant

359

Improved production of short-chain fatty acids from waste activated sludge driven by carbohydrate addition in continuous-flow reactors: Influence of SRT and temperature

360

Improved production of the anticancer compound 1403C by glucose pulse feeding of marine Halorosellinia sp. (No. 1403) in submerged culture

361

Improved production of ZnS blue phosphor powder

362

Improved productivity through failure analysis: Case studies in precision forging of aerospace components

363

Improved productivity using a modified table formwork system for high-rise building in Korea

364

Improved profile likelihood inference

365

Improved profile of bad phosphorylation and caspase 3 activation after blood versus crystalloid cardioplegia

366

Improved Profitability and Competition in Two Level Supply Chain by Non-Cooperative Games

367

Improved prognosis following peritonectomy procedures and hyperthermic intraperitoneal chemotherapy for peritoneal carcinomatosis from appendiceal carcinoma

368

Improved prognosis for biomarkers in breast cancer

369

Improved prognosis of heart failure due to idiopathic dilated cardiomyopathy in children

370

Improved prognosis of postoperative hepatocellular carcinoma patients when treated with functional foods: a prospective cohort study

371

Improved project management through improved document management

372

Improved Projection for Cylindrical Algebraic Decomposition

373

Improved proof of the no-ghost theorem for fermion states of the superstring Original Research Article

374

Improved properties and microstructure of porous silicon nitride/silicon oxide composites prepared by sol–gel route

375

Improved properties of amorphous calcium phosphate fillers in remineralizing resin composites

376

Improved properties of GRC composites using commercial E-glass fibers with new coatings

377

Improved properties of hydroxyapatite–carbon nanotube biocomposite: Mechanical, in vitro bioactivity and biological studies

378

Improved properties of Pulsed Laser Deposited YBaCuO on NdGaO3 using CeO2 template layers

379

Improved properties of the long arc generator (LARGE)

380

Improved properties of the non-covalent coating with N,N-didodecyl-N, N-dimethylammonium bromide for the separation of basic proteins by capillary electrophoresis with acidic buffers in 25 μm capillaries

381

Improved properties of TiAlN coatings through the multilayer structure

382

Improved Properties of Weathered Coal and SBRIWeathered Coal Compound Modified Asphalt.

383

Improved propionic acid production from glycerol with metabolically engineered Propionibacterium jensenii by integrating fed-batch culture with a pH-shift control strategy

384

Improved propionic acid production from glycerol: Combining cyclic batch- and sequential batch fermentations with optimal nutrient composition

385

Improved propionic acid production with metabolically engineered Propionibacterium jensenii by an oxidoreduction potential-shift control strategy

386

Improved prostate cancer control with the use of HDR brachytherapy boost

387

Improved prostate cancer detection with anterior apical prostate biopsies

388

Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes

389

Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes

390

Improved protection of the consumer community against food-transmitted diseases with a microbial aetiology: A pivotal food safety issue calling for a precautionary approach

391

Improved protein-adsorption resistance of polyethersulfone membranes via surface segregation of ultrahigh molecular weight poly(styrene-alt-maleic anhydride)

392

Improved proteomic discovery by sample pre-fractionation using dual-column ion-exchange high performance liquid chromatography

393

Improved protocol for isolation of genomic DNA from leaf tissues of Phyllanthus emblica Gaertn

394

Improved protocol for the formation of N-(p-nitrobenzyloxy)aminoalditol derivatives of oligosaccharides

395

Improved protocol for the synthesis of functionalized triphenylene ketals

396

Improved protocols for quantitative determination of metabolites from biological samples using high performance ionic-exchange chromatography with conductimetric and pulsed amperometric detection

397

Improved Protocols for the Molybdenum-Catalyzed Hydrostannation of Alkynes

398

Improved proton spectroscopic U-FLARE imaging for the detection of coupled resonances in the rat brain in vivo

399

Improved proximate time-optimal sliding-mode control of hard disk drives

400

Improved pseudo-capacitive performance of manganese oxide films synthesized by the facile sol–gel method with iron acetate addition

401

Improved psychomotor performance in aged mice fed diet high in antioxidants is associated with reduced ex vivo brain interleukin-6 production

402

Improved Pt-Ni nanocatalysts for dry reforming of methane Original Research Article

403

Improved Pulmonary Adaptation in Newborn Calves with Postnatal Acidosis

404

Improved pulsed broadband ultrasonic spectroscopy for analysis of liquid-particle flow

405

Improved purification for thermophilic F1F0 ATP synthase using n-dodecyl β-d-maltoside

406

Improved purification of the membrane-bound hydrogenase–sulfur-reductase complex from thermophilic archaea using ϵ-aminocaproic acid-containing chromatography buffers

407

Improved purification of β-lactoglobulin from acid whey by means of ceramic hydroxyapatite chromatography with sodium fluoride as a displacer

408

Improved purity assessment of high-performance liquid chromatography diode array detection data for overcoming the presence of the non-linearity artefact

409

Improved PV/T solar collectors with heat extraction by forced or natural air circulation

410

Improved QCD form factor constraints and Γb → Γcℓν Original Research Article

411

Improved QCM-D signal-to-noise ratio using mesoporous silica and titania

412

Improved q-rung orthopair and T-spherical fuzzy sets

413

Improved QSPR generalized interaction parameters for the nonrandom two-liquid activity coefficient model

414

Improved QSS-μPCD measurement with quality of decay control: Correlation with steady-state carrier lifetime

415

Improved quality and energy performance of a fixed-bed longan dryer by thermodynamic modifications Original Research Article

416

Improved quality and storage of rice flour (MR 220) by rice bran

417

Improved quality control charts for monitoring the process mean, using double-ranked set sampling methods

418

Improved quality control in gas chromatography interfaced to stable isotope ratio mass spectrometry by application of derivative chromatography Original Research Article

419

Improved quality of input data for maintenance optimization using expert judgment

420

Improved Quality of Life in A Case of Cerebral Palsy after Bone Marrow Mononuclear Cell Transplantation

421

Improved quality of life in patients with partial seizures after conversion to oxcarbazepine monotherapy

422

Improved quality of life with cardiac rehabilitation in post-myocardial infarction patients

423

Improved quality of life with jejunal pouch reconstruction after total gastrectomy

424

Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition

425

Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition

426

Improved quality of reconstructed images using floating point arithmetic for moment calculation

427

Improved quantification limits in chiral capillary electrochromatography by peak compression effects

428

Improved quantification of active soil microfauna by a "counting crew"

429

Improved quantification of aggregated bacteria by combined enzymatic and mechanical treatment of flocs and biofilm from a rotating drum bioreactor

430

Improved quantification of grain boundary segregation by EDS in a dedicated STEM

431

Improved quantification of grain boundary segregation by EDS in a dedicated STEM

432

Improved quantification of salivary gland scintigraphy by means of factor analysis

433

Improved quantification of stress proteins by western blotting

434

Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion

435

Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion

436

Improved quantitation in 3QMAS of spin 5/2 nuclei by RF power modulation of FAM-II

437

Improved quantitative detection of 11 urinary phthalate metabolites in humans using liquid chromatography–atmospheric pressure chemical ionization tandem mass spectrometry

438

Improved quantitative ion chromatography of industrial sugars: removal of interfering amino acids

439

Improved quantitative method for fludarabine in human plasma by liquid chromatography and tandem mass spectrometry

440

Improved quantitative solution state 13C NMR analysis of ethylene-1-octene copolymers

441

Improved quantitative structure–activity relationship models to predict antioxidant activity of flavonoids in chemical, enzymatic, and cellular systems Original Research Article

442

Improved Quantity and Quality of Life: A Winning Combination to Treat Advanced Heart Failure

443

Improved quantum-inspired evolutionary algorithm with diversity information applied to economic dispatch problem with prohibited operating zones

444

Improved quarter-point crack tip element

445

Improved quasi-orthogonal codes through constellation rotation

446

Improved Quasi-Path Restoration in Mesh Networks

447

Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications

448

Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications

449

Improved radial basis function methods for multi-dimensional option pricing

450

Improved radial dose function estimation using current version MCNP Monte-Carlo simulation: Model 6711 and ISC3500 125I brachytherapy sources

451

Improved radial heat sink for led lamp cooling

452

Improved radiation damage tolerance of titanium nitride ceramics by introduction of vacancy defects

453

Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors

454

Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors

455

Improved radiation measurements on JET – First results from an upgraded bolometer system

456

Improved radiation tolerance of MAPS using a depleted epitaxial layer

457

Improved radiation tolerance of MAPS using a depleted epitaxial layer

458

Improved radio occultation sounding of the Arctic atmosphere using simulations with a high resolution atmospheric model

459

Improved radioiodination of 1,2-dipalmitoyl-3-IPPA via a tributyltin intermediate

460

Improved radioiodination of biomolecules using exhaustive Chloramine-T oxidation

461

Improved radiometabolite analysis procedure for positron emission tomography (PET) radioligands using a monolithic column coupled with direct injection micellar/high submicellar liquid chromatography

462

Improved rainfall estimation over the Indian region using satellite infrared technique Original Research Article

463

Improved Rainfall Runoff Estimates Using Remotely Sensed Soil Moisture

464

Improved range image segmentation by analyzing surface fit patterns

465

Improved rank-based dependence measures for categorical data

466

Improved Rapid Preparation of Polyelectrolyte-protected Gold Nanoparticles through a Microwave-based Thermal Process

467

Improved rapidly-quenched hydrogen-absorbing alloys for development of improved-capacity nickel metal hydride batteries

468

Improved rate capability of lithium-ion batteries with Ag nanoparticles deposited onto silicon/carbon composite microspheres as an anode material

469

Improved rate control for electron-beam evaporation and evaluation of optical performance improvements

470

Improved ratio estimators of variance based on robust measures

471

Improved rational hydrograph method

472

Improved reaction pattern of an endoglycanase from Paenibacillus cookii for chitosan oligosaccharide production

473

Improved reaction time method, information processing speed, and intelligence

474

Improved reactivity of large coal particles by K2CO3 addition during steam gasification

475

Improved Real-Coded GA for Groundwater Bioremediation

476

Improved real-time RT-PCR assays of two colorectal cancer peripheral blood mRNA biomarkers: A pilot study

477

Improved rechargeability of manganese oxide cathodes in alkaline cells in the presence of TiB2 and TiS2

478

Improved recognition of alkylammonium salts by ion pair recognition based on a novel heteroditopic pillar[5]arene receptor

479

Improved reconstruction of palaeo-environments through unravelling of preserved vegetation biomarker patterns

480

Improved rectangular method on stochastic Volterra equations

481

Improved Recursive Algorithm for Light Scattering by a Multilayered Sphere

482

Improved recursive Newton-type algorithm for frequency and spectra estimation in power systems

483

Improved recursive Newton-type algorithm for power system relaying and measurement

484

Improved recycling of livestock slurries on maize by means of a modular tanker and spreader

485

Improved recycling with life cycle information tagged to the product

486

Improved reduced-bias tail index and quantile estimators

487

Improved refined plastic hinge analysis accounting for strain reversal

488

Improved refined plastic-hinge analysis accounting for local buckling

489

Improved refining properties of pulps pretreated with ionic liquids under mild conditions

490

Improved Regeneration Efficiency from Mature Embryos of Barley Cultivars

491

Improved regionalization of streamflow by use of the streamflow equivalent of precipitation as an explanatory variable

492

Improved regioselective mononitration of toluene over ZSM-5 zeolite catalysts

493

Improved relations for vibrational relaxation in gases

494

Improved relay auto-tuning with static load disturbance

495

Improved reliability for echocardiographic measurement of left ventricular volume using harmonic power imaging mode combined with contrast agent

496

Improved reliability modeling using Bayesian networks and dynamic discretization

497

Improved reliability modeling using Bayesian networks and dynamic discretization

498

Improved reliability of leucite reinforced glass by ion exchange

499

Improved reliability of low-temperature polysilicon TFT by post-annealing gate oxide

500

Improved reliability of wind turbine towers with tuned liquid column dampers (TLCDs)

501

Improved reliable approach to predict melting points of energetic compounds

502

Improved remote sensing detection of soil salinity from a semi-arid climate in Northeast Brazil

503

Improved removal of Trinitrotoluene (TNT) from contaminated soil by inducing aerobic process: kinetic and chemical byproducts

504

Improved reoxidation tolerance of Ni–Fe metal support for LaGaO3 thin film electrolyte cell

505

Improved Repeatability of Pulsed Field Magnetometry Measurements Through Peltier Effect Temperature Control of Measurement Coils Original Research Article

506

Improved replicon cellular activity of non-nucleoside allosteric inhibitors of HCV NS5B polymerase: From benzimidazole to indole scaffolds

507

Improved representation of generator and load dynamics in the study of voltage limited power system operations

508

Improved representation of topographic effects by a vertical adaptive grid in vector-ocean-model (VOM). Part I: Generation of adaptive grids

509

Improved representation of topographic effects by a vertical adaptive grid in Vector-Ocean-Model (VOM). Part II: Simulations in unstructured adaptive grids

510

Improved representations of misorientation information for grain boundary science and engineering

511

Improved reproducibility in scanning capacitance microscopy for quantitative 2D carrier profiling on silicon

512

Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography

513

Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography

514

Improved reproducibility of broadband ultrasound attenuation of the os calcis by using a specific region of interest

515

Improved reproducibility of chemical reactions on purified polystyrene resins monitored by 31P MAS NMR

516

Improved reproducibility of high-resolution peripheral quantitative computed tomography for measurement of bone quality

517

Improved reproducibility of magnetic stimulation-evoked motor potentials in the human masseter by a new method for locating stimulation sites on the scalp

518

Improved Residents’ Knowledge after an Advanced Regional Anesthesia Education Program

519

Improved residual method for approximating Bratu problem

520

Improved Resistance Management for Durable Disease Control: A Case Study of Phoma Stem Canker of Oilseed Rape (Brassica napus)

521

Improved resistance of alumina to mild wear by aluminium titanate additions

522

Improved resistance to serum oxidation in Gilbertʹs syndrome: A mechanism for cardiovascular protection

523

Improved resistive switching properties in stacked structures

524

Improved resolution for a multi-fringe phase detection circuit of a far infrared laser interferometer on LHD

525

Improved resolution in dipolar NMR spectra using constant time evolution PISEMA experiment

526

Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)

527

Improved resolution of serum bisalbumin on electrophoresis and investigation of bisalbumin in urine

528

Improved resolution of the multiple inverse method by eliminating erroneous solutions

529

Improved Respirator for Protection Against Exposure to Airborne Viruses

530

Improved response characteristics of SnO2 thin film loaded with nanoscale catalysts for LPG detection

531

Improved response factor methods for seismic fragility of reactor building Original Research Article

532

Improved response function calculations for scintillation detectors using an extended version of the MCNP code

533

Improved response function calculations for scintillation detectors using an extended version of the MCNP code

534

Improved response function for the Simplex optimization of piecewise linear discriminants

535

Improved response matrices of Bonner sphere spectrometers with 6LiI scintillation detector and 3He proportional counter between 15 and 100 MeV

536

Improved response modeling based on clustering, under-sampling, and ensemble

537

Improved response of CdO nanorods towards liquefied petroleum gas (LPG): Effect of Pd sensitization

538

Improved response surface method and its application to stiffened plate reliability analysis

539

Improved Results for Postcardiotomy Cardiogenic Shock With the Use of Implantable Left Ventricular Assist Devices

540

Improved results in supersymmetric electroweak baryogenesis Original Research Article

541

Improved results in the management of surgical candidates with lung cancer

542

Improved results on estimating and extending the radius of an attraction ball

543

Improved results on model reduction for Markovian jump systems with partly known transition probabilities

544

Improved results on stability of continuous-time switched positive linear systems

545

Improved results on the 0–1 multidimensional knapsack problem

546

Improved Results Treating Lung Allograft Failure With Venovenous Extracorporeal Membrane Oxygenation

547

Improved resuscitation training of senior house officers in oral and maxillofacial surgery

548

Improved retention of imidacloprid (Confidor®) in soils by adding vermicompost from spent grape marc

549

Improved retrieval effectiveness by efficient combination of term proximity and zone scoring: A simulation-based evaluation

550

Improved Retrieval of Online Images via Site Operator: Findings at a Website Level

551

Improved retrieval of sea ice total concentration from spaceborne passive microwave observations using numerical weather prediction model fields: An intercomparison of nine algorithms

552

Improved retrievals of cloud boundaries from MODIS for use in air quality modeling

553

Improved retrievals of the optical properties of cirrus clouds by a combination of lidar methods

554

Improved reverse analysis for material characterization with dual sharp indenters

555

Improved reverse thermo-responsive polymeric systems

556

Improved reversed-phase gradient retention modeling

557

Improved reversibility in aged porous silicon NO2 sensors

558

Improved reversibility of color changes in electrochromic Ni–Al layered double hydroxide films in presence of electroactive anions

559

Improved reversible dehydrogenation of LiBH4–MgH2 composite by the synergistic effects of Al and MgO

560

Improved reversible dehydrogenation properties of 2LiBH4–MgH2 composite by milling with graphitic carbon nitride

561

Improved reversible dehydrogenation properties of LiBH4–MgH2 composite by tailoring nanophase structure using activated carbon

562

Improved reversible hydrogen storage of LiAlH4 by nano-sized TiH2

563

Improved RF modeling techniques for enhanced AlGaN/GaN HFETs

564

Improved Rheological Model of OilBased Drilling Fluid for Southwestern Iranian Oilfields

565

Improved ridge estimators in a linear regression model

566

Improved Riemann solvers for complex transport in two-dimensional unsteady shallow flow

567

Improved right heart function with a compliant inflow artificial lung in series with the pulmonary circulation

568

Improved right ventricular–vascular coupling during active pulmonary hypertension

569

Improved rigorous coupled-wave analysis for polar magnetic gratings Original Research Article

570

Improved Risk Assessment for Abdominal Aortic Aneurysm Rupture: Off-the-Wall Imaging

571

Improved Ritter reaction with CF3-containing oxirane for an access to central units of protease inhibitors

572

Improved road traffic emission inventories by adding mean speed distributions

573

Improved robust absolute stability criteria for uncertain time-delay systems

574

Improved robust backstepping adaptive control for nonlinear discrete-time systems without overparameterization

575

Improved robust Bayes estimators of the error variance in linear models

576

Improved robust H2 and H∞ filtering for uncertain discrete-time systems

577

Improved robustness and consistency of 3D contact algorithms based on a dual mortar approach

578

Improved room-temperature hydrogen sensing performance of directly formed Pd/WO3 nanocomposite

579

Improved rotary vane expander for trans-critical CO2 cycle by introducing high-pressure gas into the vane slots

580

Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors

581

Improved rounding procedures for the discrete version of the capacitated EOQ problem

582

Improved route planning and scheduling of waste collection and transport

583

Improved Routh-Pade approximants: a computer-aided approach

584

Improved routine speciation of organotin compounds in environmental samples by pulsed flame photometric detection

585

Improved RP-HPLC method to determine neferine in dog plasma and its application to pharmacokinetics

586

Improved RSA accuracy with DLT and balanced calibration marker distributions with an assessment of initial-calibration

587

Improved ruggedness for flow-based kinetic methods of analysis

588

Improved Runge-Kutta Methods for Solving Ordinary Differential Equations

589

Improved RuO4-catalysed oxidative cyclisation of geraniol-type 1,5-dienes to cis-2,5-bis(hydroxymethyl)tetrahydrofuranyldiols

590

Improved salt tolerance in canola (Brasica napus) plants by overexpression of Arabidopsis Na+/H+ antiporter gene AtNHX1

591

Improved salt tolerance of jute plants expressing the katE gene from Escherichia coli

592

Improved sample complexity estimates for statistical learning control of uncertain systems

593

Improved sample preparation and rapid UHPLC analysis of SO2 binding carbonyls in wine by derivatisation to 2,4-dinitrophenylhydrazine

594

Improved sample preparation for the quantitative analysis of paroxetine in human plasma by stable isotope dilution negative ion chemical ionisation gas chromatography–mass spectrometry

595

Improved sample treatment and chromatographic method for the determination of isoflavones in supplemented foods

596

Improved sample treatment for the determination of bisphenol A and its chlorinated derivatives in sewage sludge samples by pressurized liquid extraction and liquid chromatography–tandem mass spectrometry

597

Improved sample treatment for the determination of insoluble soap in sewage sludge samples by liquid chromatography with fluorescence detection

598

Improved sampling methods document decline in soil organic carbon stocks and concentrations of permanganate oxidizable carbon after transition from swidden to oil palm cultivation

599

Improved sampling techniques for baked clay and soft sediments

600

Improved sand surface element for residual stress determination

601

Improved satisfaction of university faculty by utilizing the Bat metaheuristic algo- rithm (Case study of the faculty of humanities, Islamic Azad University, Parand Branch)

602

Improved Saturation Relay Test for Systems with Large Dead Time

603

Improved scalar shift correlation NMR spectroscopy in solids

604

Improved scaling rules for bandgaps in graphene nanomeshs

605

Improved scaling technique for two-phase pressure—saturation relationships

606

Improved scene classification using efficient low-level features and semantic cues

607

Improved Scene Reconstruction from Range Images

608

Improved scheme of chelation ion chromatography with a mixed eluent for the simultaneous analysis of transition metals at μg l−1 levels

609

Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K

610

Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K

611

Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry

612

Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry

613

Improved score tests for one-parameter exponential family models

614

Improved screening capabilities in forensic toxicology by application of liquid chromatography–tandem mass spectrometry Original Research Article

615

Improved Screening for Breast Cancer Associated with a Telephone-Based Risk Assessment

616

Improved screening for methyldibromoglutaronitrile allergy

617

Improved screening method for the detection of a range of nitroimidazoles in various matrices by optical biosensor Original Research Article

618

Improved Screening of cDNAs Generated by mRNA Differential Display Enables the Selection of True Positives and the Isolation of Weakly Expressed Messages

619

Improved screening procedure for biogenic amine production by lactic acid bacteria

620

Improved Sea Ice Parcel Trajectories in the Arctic via Data Assimilation

621

Improved sea level anomaly prediction through combination of data relationship analysis and genetic programming in Singapore Regional Waters

622

Improved sealing treatments for thick thermal barrier coatings

623

Improved search heuristics for the sa-tree

624

Improved seawater intake and pre-treatment system based on Neodren technology Original Research Article

625

Improved secretion of Candida antarctica lipase B with its native signal peptide in Pichia pastoris

626

Improved sectoral allocation of NMVOC emissions from solvent use in Greece Original Research Article

627

Improved Secure Searchable Asymmetric Encryption for Cloud Storage Services

628

Improved security of a dynamic remote data possession checking protocol for cloud storage

629

Improved sedimentation field-flow fractionation separation channel for concentrated cellular elution

630

Improved Segmental Isotope Labeling Methods for the NMR Study of Multidomain or Large Proteins: Application to the RRMs of Npl3p and hnRNP L

631

Improved segmentation of meteorite micro-CT images using local histograms

632

Improved segmentation of X-ray tomography data from porous rocks using a dual filtering approach

633

Improved Seismic Design of Structural Frames by Optimization of Equivalent Lateral Load Pattern

634

Improved Seismic Performance of Chevron Brace Frames Using Multi-Pipe Yield Dampers

635

Improved seismic response of multi-span bridges retrofitted with compound restrainers

636

Improved selection and management of the auricular composite graft donor site

637

Improved selection criteria for ordering stat venous ultrasounds from the emergency department

638

Improved selection of LMW over HMW proteins from human plasma by mesoporous silica particles with external modification

639

Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning

640

Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning

641

Improved selective cholesterol adsorption by molecularly imprinted poly(methacrylic acid)/silica (PMAA–SiO2) hybrid material synthesized with different molar ratios

642

Improved Selectivity for Cu(II) of Methyl-Substituted Poly(pyrazolyl)borates, [HB(3-Mepz)3]- and [B(3-Mepz)4]-, through Steric Contact

643

Improved selectivity for the analysis of maternal serum and cord serum for polyfluoroalkyl chemicals

644

Improved selectivity for the binding of naphthyridine dimer to guanine–guanine mismatch Original Research Article

645

Improved selectivity in detection of polar basic drugs by liquid chromatography–electrospray ionization mass spectrometry: Illustration using an assay method for the determination of famotidine in human plasma

646

Improved selectivity in the toluene alkylation reaction through understanding and optimising the process variables Original Research Article

647

Improved selectivity of oxide semiconductor type gas sensor using compensating element

648

Improved selectivity towards NO2 of phthalocyanine-based chemosensors by means of original indigo/nanocarbons hybrid material

649

Improved selectivity, response time and recovery time by [0 1 0] highly preferred-orientation silicalite-1 layer coated on SnO2 thin film sensor for selective ethylene gas detection

650

Improved self-alignment scheme for SINS using augmented measurement

651

Improved self-calibrated spiral parallel imaging using JSENSE

652

Improved semi-analytic sensitivity analysis combined with a higher order approximation scheme in the framework of adjoint variable method

653

Improved semi-empirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes

654

Improved sensitivities in MW dispatch for control of voltage

655

Improved sensitivity analysis by a coupled FE–EFG method

656

Improved Sensitivity and Characterization of High-Speed Ion Chromatography of Inorganic Anions

657

Improved sensitivity and gradient-enhanced multiplicity edited two-dimensional heteronuclear shift correlation technique

658

Improved sensitivity for transition metal ions by use of sulfide in the Belousov–Zhabotinskii oscillating reaction Original Research Article

659

Improved sensitivity in detection of chlormequat by liquid chromatography–mass spectrometry

660

Improved sensitivity of sedimentary phospholipid analysis resulting from a novel extract cleanup strategy

661

Improved Sensitization of Antigen-Presenting Cells with Transferrin-Bound Peptides: Advantages in Competition for Antigen Presentation

662

Improved Sensor Selection Technique by Integrating Sensor Fusion in Robot Position Estimation

663

Improved sentence retrieval using local context and sentence length

664

Improved separation and characterization of lipopolysaccharide related compounds by reverse phase ion pairing-HPLC/electrospray ionization-quadrupole-mass spectrometry (RPIP-HPLC/ESI-Q-MS)

665

Improved separation and detection of picolinic acid and quinolinic acid by capillary electrophoresis-mass spectrometry: Application to analysis of human cerebrospinal fluid

666

Improved separation and quantification of neutral and polar lipid classes by HPLC–ELSD using a monolithic silica phase: Application to exceptional marine lipids

667

Improved separation efficiency in nanofiltration by using a membrane stack Original Research Article

668

Improved separation efficiency of neurotransmitters on a native printed capillary electrophoresis microchip simply by manipulating electroosmotic flow

669

Improved separation efficiency of photogenerated carriers for Fe2O3/SrTiO3 heterojunction semiconductor

670

Improved separation methods for the recovery of 82Sr from irradiated targets

671

Improved separation of biologically active substances on some composite sorbents

672

Improved separation of furocoumarins of essential oils by supercritical fluid chromatography

673

Improved separation of metallothionein isoforms by the presence of cyclodextrin in capillary zone electrophoresis

674

Improved Separation of Neolithic Metapodials of Sheep (Ovis) and Goats (Capra) from Arene Candide Cave, Liguria, Italy

675

Improved separation of sucrose ester isomers using gradient high performance liquid chromatography with evaporative light scattering detection

676

Improved separation of the 209 polychlorinated biphenyl congeners using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry

677

Improved sequential linear programming formulation for structural weight minimization Original Research Article

678

Improved sequential procedures for estimating the percentile of a normal distribution

679

Improved sequentially linear solution procedure

680

Improved serodiagnosis of hydatid cyst disease using gold nanoparticle labeled antigen B in naturally infected sheep.

681

Improved Serological Response to Human Diploid Cell Rabies Vaccine When Given Simultaneously with Antirabies Hyperimmune Globulin

682

Improved serpentine laminating micromixer with enhanced local advection

683

Improved shape hardening function for bounding surface model for cohesive soils

684

Improved shape memory composites combined with TiNi wire and shape memory epoxy

685

Improved shape stability of nanosilica-filled PBT fibrils in PS matrix: Effects of accelerated crystallization and enhanced viscoelasticity

686

Improved shell finite element for piezothermoelastic analysis of smart fiber reinforced composite structures

687

Improved shoot regeneration protocol for canola explants and pre-assessment of salinity tolerance in canola transgenic plants

688

Improved shooting technique for numerical computations of eigenvalues in Sturm–Liouville problems Original Research Article

689

Improved short peptide identification using HILIC–MS/MS: Retention time prediction model based on the impact of amino acid position in the peptide sequence

690

Improved short-circuit photocurrent densities in dye-sensitized solar cells based on ordered arrays of titania nanotubule electrodes

691

Improved shoulder contour following forequarter amputation with an osteomyocutaneous free flap from the amputated extremity: two cases

692

Improved Shuffled Frog Leaping Algorithm and its multi-phase model for multi-depot vehicle routing problem

693

IMPROVED SIGNAL PROCESSING FOR SPLIT HOPKINSON BAR TESTS ON (QUASI-) BRITTLE MATERIALS

694

Improved Signal-to-Noise Ratio Estimation for Speech Enhancement

695

Improved sign-based learning algorithm derived by the composite nonlinear Jacobi process

696

Improved silver ion-selective electrodes using novel 1,3-bis(2-benzothiazolyl)thioalkoxy-p-tert-butylcalix[4]arenes

697

Improved silver/zinc secondary cells for underwater applications

698

Improved simulation method for the calculation of the intrinsic viscosity of some dendrimer molecules

699

Improved simulation of feedbacks between atmosphere and sea ice over the Arctic Ocean in a coupled regional climate model

700

Improved Simulation of Flow Regime Transition in Sewers: Two-Component Pressure Approach

701

Improved Simulation of Flows with Free-Surface Waves by Optimizing the Angle Factor in the HRIC Interface-Sharpening Scheme

702

Improved simulation of HVDC converter transformers in electromagnetic transient programs

703

Improved simulation of the ICRF waves in the VASIMR plasma Original Research Article

704

Improved simulation of water vapour and clear-sky radiation using 24-hour forecasts from ERA40

705

Improved simultaneous determination method of β-carotene and retinol with saponification in human serum and rat liver

706

Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter

707

Improved single neuron controller for multivariable stochastic systems with non-Gaussianities and unmodeled dynamics

708

Improved single pass core design for high temperature Super LWR

709

Improved single-drop microextraction for high sensitive analysis

710

Improved single-phase line-interactive UPS

711

Improved single-video-object rate control for MPEG-4

712

Improved singular boundary method for elasticity problems

713

Improved sinterability and conductivity enhancement of 10-mol% calcium-doped ceria using different fuel-aided combustion reactions and its structural characterisation

714

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

715

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

716

Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment

717

Improved size-tunable preparation of polymeric nanoparticles by microfluidic nanoprecipitation

718

Improved Skin Wound Healing Activity of Insulin Cream as Evidenced from the Morphological Evaluation in Guinea Pigs

719

Improved Skips for Faster Postings List Intersection

720

Improved slack-based context-dependent DEA – A study of international tourist hotels in Taiwan

721

Improved Slater approximation to SIC–OEP

722

Improved sliding mode control of a class of nonlinear systems: Application to quadruple tanks system

723

Improved Sliding Surface Search Method for Stability Analysis of Complex Slopes

724

Improved sliding wear-resistance of alumina with sub-micron grain size: A comparison with coarser grained material

725

Improved small-signal analysis for the phase-shifted PWM power converter

726

Improved smelting of ferrosilicon by means of SS-grade coal.

727

Improved Smoking Cessation in Smokers Given Ultrasound Photographs of Their Own Atherosclerotic Plaques

728

Improved smoothing spline regression by combining estimates of different smoothness

729

Improved smoothness and homogeneity of icosahedral grids using the spring dynamics method

730

Improved SNR in linear reordered 2D bSSFP imaging using variable flip angles

731

Improved SNR of MST RADAR Signals by Cosine Hyperbolic Window over Kaiser Window

732

Improved Sobolev inequalities and Muckenhoupt weights on stratified Lie groups

733

Improved Sobolev inequalities on groups of Iwasawa type in presence of symmetry

734

Improved Sobolev inequalities on the Heisenberg group Original Research Article

735

Improved Software Cost Estimation – A Robust and Interpretable Modelling Method and a Comprehensive Empirical Investigation

736

Improved software quality through improved development process descriptions

737

Improved soil hydraulic conductivity function based on specific liquid–vapour interfacial area around the soil particles

738

Improved soil moisture balance methodology for recharge estimation

739

Improved Soil Physical Properties, Yield and Water Productivity under Controlled Traffic, Raised-Bed Farming

740

Improved soil structure and citrus growth after inoculation with three arbuscular mycorrhizal fungi under drought stress

741

Improved solar efficiency by introducing graphene oxide in purple cabbage dye sensitized TiO2 based solar cell

742

Improved solarization of containerized medium for the control of Monosporascus collapse in melon

743

Improved solid fuels from co-pyrolysis of a high-sulphur content coal and different lignocellulosic wastes

744

Improved solidification influence modelling for Eulerian fuel–coolant interaction codes

745

Improved solid-phase extraction and HPLC measurement of torasemide and its important metabolites

746

Improved solid-phase extraction procedure for the isolation and in-sorbent pentafluorobenzyl alkylation of polyfunctional mercaptans: Optimized procedure and analytical applications

747

Improved solid-phase extraction/micellar procedure for the derivatization/preconcentration of benzaldehyde and methyl derivatives from water samples

748

Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence

749

Improved solid-phase synthesis and study of arylopeptoids with conformation-directing side chains

750

Improved solubilities of PAHs by multi-component Gemini surfactant systems with different spacer lengths

751

Improved solubility and stability of 7-hydroxy-4-methylcoumarin at different temperatures and pH values through complexation with sulfobutyl ether-β-cyclodextrin

752

Improved solubility and stability of trialkylammonium selenocarboxylate in organic solvents for efficient amidation with azides

753

Improved solubility of β-cyclodextrin inclusion complexes by using liquid ammonia as a solvent and the possibility of asymmetric reduction

754

Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization

755

Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization

756

Improved solubilization of pyromellitic dianhydride and 4,4′-oxydianiline in ionic liquid by the addition of zwitterion and their polycondensation

757

Improved solution stability and spinnability of concentrated polyaniline solutions using N,N′-dimethyl propylene urea as the spin bath solvent

758

Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part I. Characterisation of constituent particles and overheating

759

Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part II. Microstructure and mechanical properties

760

Improved solutions for the Chinese postman problem on mixed networks

761

Improved solutions for the traveling purchaser problem

762

Improved solutions to the Steiner triple covering problem

763

Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part I – Ionic liquids

764

Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part II – Molecular solvent properties

765

Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part III–Bunsen reaction in molecular solvents

766

Improved solvent-free microwave extraction of essential oil from dried Cuminum cyminum L. and Zanthoxylum bungeanum Maxim.

767

Improved Sonogashira CC coupling through clay supported palladium complexes with tridentate pincer bis-carbene ligands

768

Improved sonographic visualization by fluid challenge method of renal lithiasis in the nondilated collecting system experience in seven cases

769

Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol

770

Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol

771

Improved sooting tendency measurements for aromatic hydrocarbons and their implications for naphthalene formation pathways

772

Improved space borne detection of volcanic ash for real-time monitoring using 3-Band method

773

Improved space–time forecasting of next day ozone concentrations in the eastern US

774

Improved spark and ember detection using stationary wavelet transforms

775

Improved spatial memory, neurobehavioral outcomes, and neuroprotective effect after progesterone administration in ovariectomized rats with traumatic brain injury: Role of RU486 progesterone receptor antagonist

776

Improved spatial modeling by merging multiple secondary data for intrinsic collocated cokriging

777

Improved spatial resolution by MOSFET dosimetry of an x-ray microbeam

778

Improved Specificity and False Discovery Rates for Multiplex Analysis of Changes in Strain-Specific Anti-Influenza IgG

779

Improved Specificity of Myoglobin Plus Carbonic Anhydrase Assay Versus That of Creatine Kinase-MB for Early Diagnosis of Acute Myocardial Infarction, , ,

780

Improved Specificity of Transesophageal Dobutamine Stress Echocardiography Compared to Standard Tests for Evaluation of Coronary Artery Disease in Women Presenting With Chest Pain

781

Improved spectral performance of random PWM schemes with weighted switching decision

782

Improved spectral quality for 3D MR spectroscopic imaging using a high spatial resolution acquisition strategy

783

Improved spectral relaxation methods for binary quadratic optimization problems

784

Improved spectrometric characteristics of thallium bromide nuclear radiation detectors

785

Improved spectrometric characteristics of thallium bromide nuclear radiation detectors

786

Improved spectrophotometric determination of paraquat in drinking waters exploiting a Multisyringe liquid core waveguide system

787

Improved spectroscopic constants for I2 D 1Σu+

788

Improved speech recognition using a subspace projection approach

789

Improved speed and stability of st-segment recovery with reduced-dose tenecteplase and eptifibatide compared with full-dose tenecteplase for acute st-segment elevation myocardial infarction Original Research Article

790

Improved speed estimation in sensorless PM brushless AC drives

791

Improved speed of hydrogen detection by Schottky diodes on InP with electrophoretically deposited Pt nanoparticles and graphite contacts

792

Improved SPH methods for simulating free surface flows of viscous fluids

793

Improved SPICE electrical model of silicon photomultipliers

794

Improved SPICE electrical model of silicon photomultipliers

795

Improved Spice models of aluminum electrolytic capacitors for inverter applications

796

Improved spinel-containing refractory castables for slagging gasifiers

797

Improved spiral disk assembly for high-speed counter-current chromatography

798

Improved spiral tube assembly for high-speed counter-current chromatography

799

Improved spread spectrum: a new modulation technique for robust watermarking

800

Improved sputter depth resolution in Auger thin film analysis using in situ low angle cross-sections

801

Improved square properties of IDEA

802

Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis

803

Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis

804

Improved stabilisation method for networked control systems

805

Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesized using Decane as Swelling Agent

806

Improved stability analysis and gain-scheduled controller synthesis for parameter-dependent systems

807

Improved stability and altered selectivity of tyrosinase based graphite electrodes for detection of phenolic compounds Original Research Article

808

Improved stability and controlled release of ω3/ω6 polyunsaturated fatty acids by spring dextrin encapsulation

809

Improved stability and performance of aerobic granules under stepwise increased selection pressure

810

Improved stability criteria and controller design for linear neutral systems

811

Improved stability criteria for neutral type Lur’e systems with time-varying delays

812

Improved stability criteria for time-varying delayed T–S fuzzy systems via delay partitioning approach

813

Improved stability criteria for uncertain neutral-type Lur׳e systems with time-varying delays

814

Improved stability criterion and its applications in delayed controller design for discrete-time systems

815

Improved stability in N-alkylated organic semiconductors for thin film transistors: Synthesis and characterization of N,N′-dialkylated dihydrodiazapentacene derivatives

816

Improved stability of contact resistance of low melting point alloy incorporated isotropically conductive adhesives

817

Improved stability of halohydrin dehalogenase from Agrobacterium radiobacter AD1 by replacement of cysteine residues

818

Improved stability of La0.5Sr0.5FeO3 by Ta-doping for oxygen separation membrane application

819

Improved stability of liposome in oil/water emulsion by association of amphiphilic polymer with liposome and its effect on bioactive skin permeation

820

Improved stability of OLEDs with mild oxygen plasma treated PEDOT:PSS

821

Improved stability of organic field-effect transistor performance in oligothiophenes including β-isomers

822

Improved stability of quasi-solid-state dye-sensitized solar cell based on poly (ethylene oxide)–poly (vinylidene fluoride) polymer-blend electrolytes

823

Improved stability of solution processed photovoltaic devices using PQT-12

824

Improved stability of the carbon nanotubes–enzyme bioconjugates by biomimetic silicification

825

Improved stability of urease upon coupling to alkylamine and arylamine glass and its analytical use

826

Improved stability of volume resistivity in carbon black/ethylene-vinyl acetate copolymer composites by employing multi-walled carbon nanotubes as second filler

827

Improved stability quasi-solid-state dye-sensitized solar cell based on polyether framework gel electrolytes

828

Improved stabilization method for networked control systems with variable transmission delays and packet dropout

829

Improved stabilization of microencapsulated Cathepsin B in harsh conditions

830

Improved Stage Categorization of PTZ-Induced Kindling and Late Enhanced Neurogenesis in PTZ Kindled Mice

831

Improved staging of breast cancer through lymphatic mapping and sentinel node biopsy

832

Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method

833

Improved starch recovery from potatoes by enzymes and reduced water holding of the residual fibres

834

Improved starting methods for two-step Runge–Kutta methods of stage-order image Original Research Article

835

Improved start-up scenario for single-stage electronic ballast

836

Improved state estimations of lower trophic ecosystems in the global ocean based on a Green’s function approach

837

Improved statistical inference for the two-parameter Birnbaum–Saunders distribution

838

Improved statistical inference for the two-parameter Birnbaum–Saunders distribution

839

Improved statistical methods applied to surface chemistry in minerals flotation

840

Improved statistical models for limited datasets in uncertainty quantification using stochastic collocation

841

Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium

842

Improved steered response power method for sound source localization based on principal eigenvector

843

Improved Steffensen type bounds on expectations of record statistics

844

Improved stereospecific synthesis of the trans-isomers of dicyclohexano-18-crown-6 and the solid-state structure of the trans–syn–trans-isomer

845

Improved sternal closure using steel bands: Early experience with three-year follow-up

846

Improved sternal osteosynthesis using any sternal retractor

847

Improved stiffness distribution factors for evaluation of effective buckling lengths in multi-story sway frames

848

Improved stochastic competitive Hopfield network for polygonal approximation

849

Improved stochastic linearization method using mixed distributions

850

Improved stochastic optimization algorithms for adaptive optics Original Research Article

851

Improved stochastic resonance algorithm for enhancement of signal-to-noise ratio of high-performance liquid chromatographic signal Original Research Article

852

Improved Storage Stability of Pearl Millet Flour Through Microwave Treatment

853

Improved stoves in India: A study of sustainable business models

854

Improved stoves in Sub-Saharan Africa: the case of the Sudan

855

Improved strain sensing performance of glass fiber polymer composites with embedded pre-stretched polyvinyl alcohol–carbon nanotube fibers Original Research Article

856

Improved strategies for dynamic load balancing

857

Improved Strategy for a Constant Daily Light Integral in Greenhouses

858

Improved streamflow forecasting using self-organizing radial basis function artificial neural networks

859

Improved streamlines and time-of-flight for streamline simulation on irregular grids

860

Improved strength and ductility of magnesium alloy below micro-twin lamellar structure

861

Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive

862

Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns

863

Improved strength and toughness of polyketone composites using extremely small amount of polyamide 6 grafted graphene oxides

864

Improved Strength Model for Interior Flat Plate–Column Connections Subject to Unbalanced Moment

865

Improved strength of boron-doped Sn-1.0Ag-0.5Cu solder joints under aging conditions

866

Improved strength of early versus late supraspinatus tendon repair: a study in the rabbit

867

Improved strength of Ni and Zn-doped Sn–2.0Ag–0.5Cu lead-free solder alloys under controlled processing parameters

868

Improved strength-impairing contact damage resistance of Ti3Si(Al)C2/SiC composites

869

Improved stress intensity factors for a single corner crack at a loaded fastener hole

870

Improved stress intensity factors for selected configurations in cracked plates

871

Improved stresses for the 4-node tetrahedral element

872

Improved Structural Characterizations of the drkN SH3 Domain Unfolded State Suggest a Compact Ensemble with Native-like and Non-native Structure

873

Improved Structural Order, Stability, and Anion-Exchange Capacity of Cation-Mediated Bridged Hybrid Mesoscopic Materials by Using Chelating Ligands

874

Improved structural/morphological durability for organic solar cells based on poly(3-hexylthiophene) fibers photoactive layers

875

Improved Structure Design of a Single Phase Multilevel Inverter with ‎the Aim of Reducing Switching Devices ‎

876

Improved structure-adaptive anisotropic filter

877

Improved structure–property relationship models for prediction of critical properties

878

Improved Structures of Maximally Decimated Directional Filter Banks for Spatial Image Analysis

879

Improved Subcontractor Selection Employing Partnering Principles

880

Improved subgrid scale model for dense turbulent solid-liquid two-phase flows

881

Improved suboptimal Bang–Bang control of aseismic buildings with variable friction dampers

882

Improved Subspace-Based Single-Channel Speech Enhancement Using Generalized Super-Gaussian Priors

883

Improved substructuring method for eigensolutions of large-scale structures

884

Improved Sufficient Conditions for Monotonic PiecewiseRational Quartic Interpolation

885

Improved Suffix Tree Clustering for Efficient Document Clustering

886

Improved sulfur nutrition provides the basis for enhanced production of sulfur-containing defense compounds in Arabidopsis thaliana upon inoculation with Alternaria brassicicola

887

Improved superovulatory response in beef cattle following ovarian follicular ablation using a simplified transvaginal device

888

Improved superposition schemes for approximate multi-caloron configurations Original Research Article

889

Improved support concept for the Helias reactor coil system

890

Improved support vector classification using PCA and ICA feature space modification

891

Improved support vector clustering

892

Improved support vector clustering

893

Improved support vector machine regression in multi-step-ahead prediction for rock displacement surrounding a tunnel

894

Improved suppression of recurrent atrial fibrillation with dual-site right atrial pacing and antiarrhythmic drug therapy

895

Improved surface bounds based on derivatives

896

Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer

897

Improved surface photovoltaic response of nanoparticulate TiO2-pyridine derivative monolayer/n-Si(111) assembly

898

Improved surface properties of D2 steel by laser surface alloying

899

Improved surface property of PVDF membrane with amphiphilic zwitterionic copolymer as membrane additive

900

Improved surface proton conduction of yttrium-stabilized zirconia via acidic modifications

901

Improved surface roughness as a result of free-form surface machining using self-organized neural network

902

Improved surface sensing of DNA on gas-etched porous silicon

903

Improved surface stability and biotin binding properties of streptavidin coating on polystyrene

904

Improved surface treatment of the superconducting TESLA cavities

905

Improved surface treatment of the superconducting TESLA cavities

906

Improved surface-enhanced Raman scattering on electrochemically roughened silver substrates prepared in bielectrolyte solutions Original Research Article

907

Improved surface-enhanced Raman scattering on optimum electrochemically roughened silver substrates Original Research Article

908

Improved surgical field for composite arterial grafts

909

Improved surgical mesh integration into the rat abdominal wall with arginine administration

910

Improved Surgical Outcome for Chronic Severe Aortic Regurgitation With Severely Depressed Left Ventricular Systolic Function

911

Improved survivability analysis for SONET SHRs

912

Improved Survival After Cardiac Arrest Using Emergent Autopriming Percutaneous Cardiopulmonary Support

913

Improved survival after resection of colorectal liver metastases

914

Improved Survival and Decreasing Incidence of Adverse Events With the HeartMate II Left Ventricular Assist Device as Bridge-to-Transplant Therapy

915

Improved Survival and Hematopoietic Differentiation of Murine Embryonic Stem Cells on Electrospun Polycaprolactone Nanofiber

916

Improved survival and local control after total mesorectal excision or D3 lymphadenectomy in the treatment of primary rectal cancer: an international analysis of 1411 patients

917

Improved survival benefits with radiofrequency ablation for liver cancer

918

Improved survival following induction of GVHD following lipopolysaccharide immunization

919

Improved survival in cancer of the colon and rectum in Sweden

920

Improved Survival in Fontan-Associated Protein-Losing Enteropathy

921

Improved survival in patients with locally advanced prostate cancer treated with radiotherapy and goserelin, 337, M Bolla, D Gonzalez, P Warde, JB Dubois, RO Mirimanoff, G Storme, J Bernier, A Kuten, C Sternberg, T Gil, L Colette, M Pierart (Eds.), in: N

922

Improved survival in patients with nonischemic advanced heart failure and syncope treated with an implantable cardioverter-defibrillator

923

Improved survival in stage III non-small cell lung cancer: seven-year follow-up of cancer and leukemia group B (CALGB) 8433 trial: Dillman RO, Herndon J, Seagren SL. Eaton WL, Green MR J Natl Cancer Inst 1996;88:1210-5

924

Improved survival in young women with breast cancer

925

Improved survival of infants with omphalocele

926

Improved survival of Korean patients with idiopathic pulmonary arterial hypertension after the introduction of targeted therapies

927

Improved survival of patients with acute myocardial infarction with significant left ventricular dysfunction undergoing invasive coronary procedures

928

Improved Survival of Patients With End-Stage Heart Failure Listed for Heart Transplantation: Analysis of Organ Procurement and Transplantation Network/U.S. United Network of Organ Sharing Data, 1990 to 2005 Original Research Article

929

Improved survival rates support left ventricular assist device implantation early after myocardial infarction

930

Improved Survival With Multiple Left-Sided Bilateral Internal Thoracic Artery Grafts

931

Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome

932

Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome

933

Improved survival with preoperative chemotherapy followed by resection uncompromised by tumor response for advanced squamous cell carcinoma of the Head and Neck

934

Improved survival with preoperative radiotherapy in resectable rectal cancer: Swedish Rectal Cancer Trial N engl J Med 1997; 336: 980–987

935

Improved survival with VATS pleurectomy-decortication in advanced malignant mesothelioma

936

Improved symbiotic organisms search algorithm for solving unconstrained function optimization

937

Improved Symmetric Switched-Inductor/Capacitor Quasi Z-Source Inverter with Ability Uplifted-Boost

938

Improved symmetrical component-based fault distance estimation for digital distance protection

939

Improved syntheses and applicability of different DOTA building blocks for multiply derivatized scaffolds Original Research Article

940

Improved syntheses of [image] and [image]: Structural characterization of Na[Cp∗MoO3] · 5H2O and [image]

941

Improved syntheses of bis(ethynyl)-para-carboranes, 1,12-(RCtriple bond; length of mdashC)2-1,12-C2B10H10 and 1,10-(RCtriple bond; length of mdashC)2-1,10-C2B8H8 (R = H or Me3Si)

942

Improved syntheses of meso-tetraarylbenziporphyrins and observations of substituent effects on the diatropic characteristics of these formally nonaromatic carbaporphyrinoids

943

Improved syntheses of methyl (14E)- and (14Z)-dehydrocrepenynate: key intermediates in plant and fungal polyacetylene biosynthesis

944

Improved syntheses of poly(oxy-1,3-phenylenecarbonyl-1,4-phenylene) and related poly(ether–ketones) using polyphosphoric acid/P2O5 as polymerization medium

945

Improved syntheses of precursors for PET radioligands [18F]XTRA and [18F]AZAN

946

Improved syntheses of α-BOC-aminoketones from α-BOC-amino-Weinreb amides using a pre-deprotonation protocol

947

Improved synthesis and characterisation of a hydrazide derivative of diethylenetriaminepentaacetic acid for site-specific labelling of monoclonal antibodies with 111In

948

Improved synthesis and characterization of 1,3,4,6-tetra-O-acetyl-2-(N-acetylacetamido)-2-deoxy-β-d-glucopyranose

949

Improved synthesis and characterization of the copper Lyonsite-type compound Cu4−xMo3O12

950

Improved synthesis and crystal structure of tetrakis(acetonitrile)(η4-1,5-cyclooctadiene)ruthenium(II) bis[tetrafluoroborate(1−)]

951

Improved Synthesis and Crystal Structure of TiC1(3)(tmeda)(thf): A Highly Stereoselective Pinacol Coupling Reagent for Aromatic Aldehydes

952

Improved synthesis and evaluation of 17-substituted aminoalkylgeldanamycin derivatives applicable to drug delivery systems

953

Improved synthesis and hydrogen storage of a microporous metal–organic framework material

954

Improved synthesis and in vitro characterization of chitosan–thioethylamidine conjugate

955

Improved synthesis and in vitro/in vivo activities of natural product-inspired, artificial glutamate analogs Original Research Article

956

Improved synthesis and preparative scale resolution of racemic monastrol

957

Improved synthesis and radiolabeling of [11C]MP4A, a suitable ligand for the investigation of the cholinergic system using PET

958

Improved synthesis and X-ray crystal structure of pentafluorophenylcobalt tricarbonyl triphenylphosphine

959

Improved synthesis methods of standards used for quantitative determination of total isothiocyanates from broccoli in human urine

960

Improved synthesis of (2S,5S)-5-tert-butylproline

961

Improved synthesis of (4-ethenylphenyl)diphenyl methanol and its application in the preparation of trityl functionalized polystyrene resin containing tetrahydrofuran derived cross-linker

962

Improved synthesis of (9Z)-9,13-tetradecadien-11-ynal, the sex pheromone of the avocado seed moth, Stenoma catenifer

963

Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene

964

Improved synthesis of (R)-glycine-d-15N

965

Improved synthesis of (S)-7-amino-5H,7H-dibenzo[b,d]azepin-6-one, a building block for γ-secretase inhibitors

966

Improved synthesis of 1,3-diolein by Novozym 435-mediated esterification of monoolein with oleic acid

967

Improved synthesis of 1,4-dideoxy-1,4-imino-d-galactitol, an inhibitor of E. coli K12 UDP-Gal mutase and mycobacterial galactan biosynthesis

968

Improved synthesis of 1,5-dinaphtho[38]crown-10

969

Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound

970

Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound

971

Improved synthesis of 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-diacetic acid derivatives

972

Improved synthesis of 2,3:4,6-di-O-isopropylidene-d-glucopyranose and -d-galactopyranose

973

Improved synthesis of 2′-amino-2′-deoxyguanosine and its phosphoramidite Original Research Article

974

Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation

975

Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation

976

Improved synthesis of 3-aryl isoxazoles containing fused aromatic rings

977

Improved synthesis of 3-methoxy-4-hydroxymandelic acid by glyoxalic acid method

978

Improved synthesis of 4,4′-diamino-2,2′-bipyridine from 4,4′-dinitro-2,2′-bipyridine-N,N′-dioxide

979

Improved synthesis of 4-amino-7-nitrobenz-2,1,3-oxadiazoles using NBD fluoride (NBD-F)

980

Improved synthesis of 4-phenylphenalenones: the case of isoanigorufone and structural analogs

981

Improved synthesis of 6-amino-6-deoxy-d-galactono-1,6-lactam and d-mannono-1,6-lactam from corresponding unprotected d-hexono-1,4-lactones

982

Improved synthesis of 9-(2,3-dideoxy-2-fluoro-β-d-threo-pentofuranosyl)adenine (FddA) using triethylamine trihydrofluoride

983

Improved synthesis of a [4.4]-spirolactam β-turn mimetic as surrogate of the didemnin side chain dipeptide Pro-N-Me-d-Leu

984

Improved synthesis of a C3-symmetrical pyridinophane

985

Improved synthesis of a fluorogenic ceramidase substrate Original Research Article

986

Improved synthesis of an aldobiouronic acid related to hardwood xylans, and preparation of a derivative thereof suitable for linking to proteins

987

Improved synthesis of anti-[18F]FACBC: improved preparation of labeling precursor and automated radiosynthesis

988

Improved synthesis of antibacterial 3-substituted 6-anilinouracils

989

Improved synthesis of C8–C20 segment of pectenotoxin-2

990

Improved synthesis of carbon nanotubes with junctions and of single-walled carbon nanotubes

991

Improved synthesis of cellulose carbamates without by-products

992

Improved synthesis of chalcones under ultrasound irradiation

993

Improved synthesis of chalcones under ultrasound irradiation

994

Improved synthesis of chalconoid-like compounds under ultrasound irradiation

995

Improved synthesis of chalconoid-like compounds under ultrasound irradiation

996

Improved synthesis of d,l-fluorocitric acid

997

Improved synthesis of d-allothreonine derivatives from l-threonine

998

Improved synthesis of daunomycin conjugates with triplex-forming oligonucleotides. The polypurine tract of HIV-1 as a target Original Research Article

999

Improved synthesis of DCDHF fluorophores with maleimide functional groups

1000

Improved synthesis of di- and trinuclear iron carbonyl complexes containing bridging diphenylethenyl ligand.: X-ray structure of [PPh4][Fe2(CO)6(μ-CO)(μ-PhCCHPh)]

بازگشت