بر اساس عنوان

1
Influence of de-icing agents on the viscoelastic properties of asphalt mastics
2
Influence of Dekkera bruxellensis on the contents of anthocyanins, organic acids and volatile phenols of Dمo red wine
3
Influence of delamination on fatigue properties of a fibreglass composite
4
Influence of delamination on impact damage in composite structures
5
Influence of delay on survival in patients with breast cancer: a systematic review
6
Influence of delayed addition time of sodium sulfanilate phenol formaldehyde condensate on the hydration characteristics of sulfate resisting cement pastes containing silica fume
7
Influence of delayed compaction on the compressibility and hydraulic conductivity of soil–lime mixtures
8
Influence of Delayed Feeding on the Performance, Development and Response of Immune System to Newcastle Disease Vaccination in Chickens
9
Influence of delayed viral production on viral dynamics in HIV-1 infected patients
10
Influence of deleting some of the inputs and outputs on efficiency status of units in DEA
11
Influence of delignification efficiency with alkaline peroxide on the digestibility of furfural residues for bioethanol production
12
Influence of Delivery Delay on Quality of Some Promising Sugar Cane Varieties under Aswan Condition
13
Influence of demagnetization effect on giant magneto-impedance of soft ferromagnetic metal
14
Influence of demographic, physiologic, and psychosocial variables on adherence to a yearlong moderate-intensity exercise trial in postmenopausal women
15
Influence of demographics and inhalation injury on burn mortality in children
16
Influence of demulsifier on interfacial film between oil and water
17
Influence of denitrification on suspended solids and phosphorus removal in multimedia filters
18
Influence of dense stands of an exotic tree, Prosopis glandulosa Benson, on a savanna dung beetle (Coleoptera: Scarabaeinae) assemblage in southern Africa Original Research Article
19
Influence of dense surface meteorological data assimilation on the prediction accuracy of ozone pollution in the southeastern coastal area of the Korean Peninsula
20
Influence of density stratification on effluent plume dynamics*
21
Influence of Dental Alloys and an All-Ceramic Material on Cell Viability and Interleukin-1beta Release in a Three-Dimensional Cell Culture Model
22
Influence of dental carcass maturity on carcass traits and meat quality of Nellore bulls
23
Influence of dental occlusion on physical fitness decline in a healthy Japanese elderly population
24
Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives
25
Influence of dentin pre-treatment with NaOCl on the morphology of adhesive interface of self-etching adhesive systems
26
Influence of Dentin Priming with Tannin-Rich Plant Extracts on the Longevity of Bonded Composite Restorations
27
Influence of denture improvement on the nutritional status and quality of life of geriatric patients
28
Influence of denture treatment on brain function activity
29
Influence of de-oiled seed cakes on seedling performance of East Indian Rosewood(Dalbergia latifoila Roxb.)
30
Influence of Deontological and Teleological Factors on Research Ethics Evaluations
31
Influence of deoxynivalenol on feed consumption by dairy cows
32
Influence of depigmentation of pearl millet (Pennisetum glaucum L.) on sensory attributes, nutrient composition, in vitro protein and starch digestibility of pasta
33
Influence of deposit formation on corrosion at a straw-fired boiler
34
Influence of deposited metal structures on the failure mechanisms of silicon-based components
35
Influence of Deposition and Annealing Temperature on Resistivity and Nanoindentation Characteristics of Reactive Magnetic Sputtered NiO Films
36
Influence of deposition atmosphere on photocatalytic activity of TiO2/SiOx double-layers prepared by RF magnetron sputtering Review Article
37
Influence of deposition conditions on electrical and mechanical properties of Sm2O3-doped CeO2 thin films prepared by EB-PVD (+IBAD) methods. Part 1: Effective relative permittivity
38
Influence of deposition conditions on mechanical and tribological properties of nanostructured TiN/CNx multilayer films
39
Influence of deposition conditions on the microstructure of Al-based coatings for applications as corrosion and anti-permeation barrier
40
Influence of deposition conditions on the microstructure of oxides thin films
41
Influence of deposition conditions on the optical properties of erbium-doped yttrium oxide films grown by aerosol–UV assisted MOCVD
42
Influence of deposition current density on the composition and properties of electrodeposited Ni + RuO2 and Ni + IrO2 composites
43
Influence of deposition parameters and annealing treatment on the properties of GZO films grown using rf magnetron sputtering
44
Influence of deposition parameters on hard Cr–Al–N coatings deposited by multi-arc ion plating
45
Influence of deposition parameters on microstructure and contamination of electrodeposited nickel coatings from additive-free sulphamate bath
46
Influence of deposition parameters on the dielectric properties of rf magnetron sputtered Ba(ZrxTi1−x)O3 thin films
47
Influence of deposition parameters on the structure and mechanical properties of nanocomposite coatings
48
Influence of deposition pressure and selenisation on damp heat degradation of the Cu(In,Ga)Se2 back contact molybdenum
49
Influence of deposition pressure on structural, optical and electrical properties of nc-Si:H films deposited by HW-CVD Original Research Article
50
Influence of deposition pressure on the composition and structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation
51
Influence of deposition pressure on the structure and properties of fluorinated diamond-like carbon films prepared by RF reactive magnetron sputtering
52
Influence of deposition rate of LaF3 and annealing on the capacitance–voltage (C–V) characteristics of LaF3/Si heterostructures
53
Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint
54
Influence of deposition temperature (Ts), air flow rate (f) and precursors on cathodoluminescence properties of ZnO thin films prepared by spray pyrolysis
55
Influence of deposition temperature and bias voltage on the crystalline phase of Er2O3 thin films deposited by filtered cathodic arc
56
Influence of deposition temperature and heat treatment on the performance of electroless Ni–B films
57
Influence of deposition temperature and time during PVD coating of CrN on corrosive wear in liquid aluminium
58
Influence of Deposition Temperature as a Reducing Agent on Synthesis of Reduced Graphene Oxide (RGO) Nanosheets
59
Influence of deposition temperature on morphological, optical, electrical and opto-electrical properties of highly textured nano-crystalline spray deposited CdO:Ga thin films
60
Influence of deposition temperature on the structural and morphological properties of Be3N2 thin films grown by reactive laser ablation
61
Influence of depression and effect of treatment with sertraline on quality of life after hospitalization for acute coronary syndrome
62
Influence of depression, expectation of therapy effectiveness, and self-efficacy on the treatment outcome in patients with multiple somatic symptoms (MSS)
63
Influence of depressive mood on the association of CRP and obesity in 3205 middle aged healthy men
64
Influence of depth of soil disturbance on root growth dynamics of wheat seedlings associated with Rhizoctonia solani AG-8 disease severity in sandy and loamy sand soils of Western Australia
65
Influence of Desamerization on the Quality of a Jam Based on Grapefruit
66
Influence of desertification on vegetation pattern variations in the cold semi-arid grasslands of Qinghai-Tibet Plateau, North-west China
67
Influence of desiccation on the sensitivity of Cronobacter spp. to lactoferrin or nisin in broth and powdered infant formula
68
Influence of design and bearing material on polyethylene wear particle generation in total knee replacement
69
INFLUENCE OF DESIGN AND OPERATING PARAMETERS ON SEPARATING THE COARSE WHEAT BRAN BY CYCLONE
70
Influence of design and process parameters on service life of nut hot forging die
71
Influence of design on bioactivity of novel CaSiO3–CaMg(SiO3)2 bioceramics: In vitro simulated body fluid test and thermodynamic simulation
72
Influence of design parameters on cogging torque in permanent magnet machines
73
Influence of design parameters on cup–stem orientations for impingement free RoM in hip implants
74
Influence of design parameters on seismic response of post-tensioned steel MRF systems
75
Influence of design parameters on seismic response of post-tensioned steel MRF systems
76
Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
77
Influence of designer-assumed initial conditions on the numerical modelling of steel plate girders subjected to patch loading
78
Influence of desorption conditions before gas separation studies in nanocomposite MFI–alumina membranes
79
Influence of detachment layer thickness on style of thin-skinned shortening
80
Influence of detachment mechanisms on competition in biofilms
81
Influence of detachment on substrate removal and microbial ecology in a heterotrophic/autotrophic biofilm
82
Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement
83
Influence of detector surface processing on detector performance
84
Influence of detector surface processing on detector performance
85
Influence of deterministic fluctuations on the 8-state Potts model Original Research Article
86
Influence of detonation gun sprayed alumina coating on AA 6063 samples under cyclic loading with and without fretting
87
Influence of deuterium on the design of the JET water detritiation system
88
Influence of Deuterium-Depleted Water on Hepatorenal Toxicity
89
Influence of Deuterium-Depleted Water on the Isotope D/H Composition of Liver Tissue and Morphological Development of Rats at Different Periods of Ontogenesis
90
influence of deuterium-depletedwater on hepatorenal toxicity
91
INFLUENCE OF DEVELOPMENT PHASE ON PRODUCTION CHARACTERISTICS OF LUCERNE IN ZETSKO-BJELOPAVLICKA VALLEY’S AGRO-ENVIRONMENTAL CONDITIONS
92
Influence of development stage of spring oilseed rape and spring wheat on interception of wet-deposited radiocaesium and radiostrontium
93
Influence of device engineering on the analog and RF performances of SOI MOSFETs
94
Influence of dew on biomass and photosystem II activity of cyanobacterial crusts in the Hopq Desert, northwest China
95
Influence of dew on biomass and photosystem II activity of cyanobacterial crusts in the Hopq Desert, northwest China
96
Influence of Dexamethasone Administration on Hematology, Biochemistry, and Thyroid Hormones in Dogs
97
Influence of dextran concentrations and molecular fractions on the rate of sucrose crystallization in pure sucrose solutions Original Research Article
98
Influence of dextran, pullulan and gum arabic on the physical properties of frozen sucrose solutions
99
Influence of dextran-producing Weissella cibaria on baking properties and sensory profile of gluten-free and wheat breads
100
Influence of DGEBA crosslinking on Li+ ion conduction in poly(ethyleneimine) gels
101
Influence of diabetes and diabetes-gender interaction on the risk of death in patients hospitalized with congestive heart failure Original Research Article
102
Influence of diabetes mellitus on cervical intervertebral disc herniation
103
Influence of Diabetes Mellitus on Clinical Outcome in the Thrombolytic Er of Acute Myocardial Infarction
104
Influence of Diabetes Mellitus on Clinical Outcomes Following Primary Percutaneous Coronary Intervention in Patients With ST-Segment Elevation Myocardial Infarction
105
Influence of diabetes mellitus on early and late clinical outcomes in saphenous vein graft stenting
106
Influence of diabetes mellitus on early and late outcome after coronary artery bypass grafting
107
Influence of Diabetes Mellitus on Long-Term (Five-Year) Outcomes of Drug-Eluting Stents and Coronary Artery Bypass Grafting for Multivessel Coronary Revascularization
108
Influence of Diabetes Mellitus on Long-Term Survival in Systematic Off-Pump Coronary Artery Bypass Surgery
109
Influence of Diabetes Mellitus on Outcome in Patients Over 40 Years of Age With the Long QT Syndrome
110
Influence of diabetes on characteristics and outcomes in patients hospitalized with heart failure: A report from the Organized Program to Initiate Lifesaving Treatment in Hospitalized Patients with Heart Failure (OPTIMIZE-HF)
111
Influence of diabetes on characteristics and outcomes in patients hospitalized with heart failure: A report from the Organized Program to Initiate Lifesaving Treatment in Hospitalized Patients with Heart Failure (OPTIMIZE-HF)
112
Influence of diabetes on mortality and morbidity: off-pump coronary artery bypass grafting versus coronary artery bypass grafting with cardiopulmonary bypass
113
Influence of Diabetes on the Outcome of Acute Coronary Syndrome in Kuwait
114
Influence of diabetic treatment regimens on vitamin D metabolism in elderly patients
115
Influence of diagenesis on sedimentary δ15N in the Arabian Sea over the last 130 kyr
116
Influence of diagenetic processes in Thau lagoon on cadmium behavior and benthic fluxes
117
Influence of diagnostic classification on gender ratio in schizophrenia
118
Influence of diagonal web reinforcement on cyclic behavior of structural walls
119
Influence of Dialysis Duration, Peritoneal Transport Parameters, and Gender on Effluent CA125 Concentration in Patients on Peritoneal Dialysis
120
Influence of diameter in the Raman spectra of aligned multi-walled carbon nanotubes Original Research Article
121
Influence of diameter of carbon nanotubes mounted in flow-through capacitors on removal of NaCl from salt water
122
Influence of diameter on particle transport in a fractured shale saprolite
123
Influence of diamino acid derivatives of protoporphyrin IX on mouse immunological system: Preliminary results
124
Influence of diamond characteristics on the tribological behaviour of metals against diamond-coated Ti–6Al–4V alloy
125
Influence of diamond particles content on the critical load for crack initiation and fracture toughness of SiOC glass–diamond composites
126
Influence of diamond powder particles on human gene expression
127
Influence of diamond pressing process on corrosion resistance in steel
128
Influence of diamond pressing process on corrosion resistance in steel
129
Influence of diatomite addition on membrane fouling and performance in a submerged membrane bioreactor
130
Influence of diatoms on copepod reproduction. II. Uncorrelated effects of diatom-derived α,β,γ,δ-unsaturated aldehydes and polyunsaturated fatty acids on Calanus helgolandicus in the field
131
Influence of diborane on the growth rate and phase stability of diamond films Original Research Article
132
Influence of DIC hydrothermal process conditions on the gelatinization properties of standard maize starch Original Research Article
133
INFLUENCE OF DIE ANGLES ON THE MICROHARDNESS OF ALUMINUM ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
134
Influence of die geometric parameters on plastic flow of layer composites during extrusion process
135
Influence of die pressure on relaxation characteristics of briquetted biomass
136
Influence of diel biogeochemical cycles on carbonate equilibrium in a karst river
137
Influence of dielectric and sorption properties on drying behaviour and energy efficiency during microwave convective drying of selected food and non-food inorganic materials Original Research Article
138
Influence of dielectric barrier discharge atmosphere on polylactic acid (PLA) surface modification
139
Influence of dielectric barrier materials to the behavior of dielectric barrier discharge plasma for CO2 decomposition
140
Influence of Dielectric Constant on Protonation Equilibria of L-Aspartic Acid in Acetonitrile- and Ethylene Glycol-Water Mixtures
141
Influence of dielectric core, embedding medium and size on the optical properties of gold nanoshells
142
Influence of dielectric fluctuation on light-scattering properties of random copolymers in bulk
143
Influence of dielectric function properties on the optical response of plasmon resonant metallic nanoparticles
144
Influence of dielectric properties on the heating rate in free-running oscillator radio frequency systems Original Research Article
145
Influence of dielectric relaxation times of fluid mixtures on solid/liquid interfacial tension
146
Influence of diesel concentration on the fate of phenanthrene in soil
147
Influence of diesel fuel on seed germination
148
Influence of diet and ambient temperature on bovine serum insulin-like growth factor-I and thyroxine: relationships with non-esterified fatty acids, glucose, insulin, luteinizing hormone and progesterone
149
Influence of diet and rearing system on heavy pig performance, carcass and meat quality
150
Influence of diet and sea ice drift on organochlorine bioaccumulation in Arctic ice-associated amphipods
151
Influence of diet and water supply on mineral content and pH within the large intestine of horses with enterolithiasis
152
Influence of diet complexity on productive performance and nutrient digestibility of weanling pigs
153
Influence of diet enriched with green tea on innate humoral and cellular immune response of kelp grouper (Epinephelus bruneus) to Vibrio carchariae infection
154
Influence of diet on growth yields of rumen micro-organisms in vitro and in vivo: influence on growth yield of variable carbon fluxes to fermentation products
155
Influence of diet on growth, condition and reproductive capacity in Newfoundland and Labrador cod (Gadus morhua): Insights from stable carbon isotopes (δ13C)
156
Influence of diet on long-term cold storage of the predator Podisus maculiventris (Say) (Heteroptera: Pentatomidae)
157
Influence of diet on proximate composition and fatty acid profile in common carp (Cyprinus carpio)
158
Influence of diet on proximate composition and fatty acid profile in common carp (Cyprinus carpio)
159
Influence of Diet on the Shedding of Candida glabrata by Experimentally Infected Preweaned Calves
160
Influence of diet patterns on fuelwood consumption in Kenyan boarding schools and implications for data and energy policies
161
Influence of diet restriction on NMDA receptor subunits and learning during aging
162
Influence of diet supplementation with yeast culture (Saccharomyces cerevisiae) on performance of Zaraibi goats
163
Influence of dietary algal N-3 fatty acids on breeding induced inflammation and endometrial cytokine expression in mares bred with frozen semen
164
Influence of dietary antioxidants and fatty acids on neutrophil mediated bacterial killing and gene expression in healthy Beagles
165
Influence of dietary antioxidants and fatty acids on neutrophil mediated bacterial killing and gene expression in healthy Beagles
166
Influence of dietary arginine on sexual dimorphism of arginine metabolism in mice
167
Influence of Dietary Aspirin on Growth Performance, Antioxidant Status, and Mortality due to Ascites in Broiler Chickens
168
Influence of Dietary Bacillus Sp. Fermented Shrimp Waste on Broiler Meat Quality
169
Influence of dietary beet pulp on caecal VFA, experimental colibacillosis and iota-enterotoxaemia in rabbits
170
Influence of dietary benzoic acid addition on nutrient digestibility and selected biochemical parameters in fattening rabbits
171
Influence of dietary buffers on the growth rate and some blood constituents of sheep
172
Influence of Dietary Calcium on Chlordecone-Induced Biochemical Changes in Serum of Rat
173
Influence of Dietary Capsaicin on Redox Status in Red Blood Cells During Human Aging
174
Influence of dietary catechols on the growth of enteropathogenic bacteria
175
Influence of dietary cobalt on performance, nutrient digestibility and plasma metabolites in lambs
176
INFLUENCE OF DIETARY COBALT ON PERFORMANCE, NUTRIENT DIGESTIBILITY AND RUMEN ACTIVITY IN LAMBS
177
Influence of dietary components associated with high or low risk of colon cancer on apoptosis in the rat colon
178
Influence of dietary components on Aspergillus niger prolyl endoprotease mediated gluten degradation
179
Influence of dietary conjugated linoleic acid (CLA) and age at slaughtering on performance, slaughter- and meat quality, lipoproteins, and tissue deposition of CLA in barrows
180
Influence of dietary conjugated linoleic acid (CLA) and age at slaughtering on performance, slaughter- and meat quality, lipoproteins, and tissue deposition of CLA in barrows
181
Influence of dietary conjugated linoleic acid on volatile profiles, color and lipid oxidation of irradiated raw chicken meat
182
Influence of dietary conjugated linoleic acids (CLA) and age at slaughtering on meat quality and intramuscular collagen in rabbits
183
Influence of dietary conjugated linoleic acids and vitamin E on meat quality, and adipose tissue in rabbits
184
Influence of dietary creatine monohydrate and carcass cooling rate on colour characteristics of pork loin from different pure breeds
185
Influence of Dietary Energy and Protein Intake on Yield and Composition of Milk in Crossbred Dairy Cows
186
Influence of dietary energy level on the production of breeding ostriches
187
Influence of dietary fat on pork eating quality
188
Influence of dietary fat on the enantioselective disposition of 2,2′,3,3′,6,6′-hexachlorobiphenyl (PCB 136) in female mice
189
Influence of Dietary Fat on the Intestinal Absorption of Lipophilic Compounds in Goldfish (Carassius auratus)
190
Influence of dietary fat on the nutrient intake and growth of children from 1 to 5 y of age: the Special Turku Coronary Risk Factor Intervention Project
191
Influence of dietary fat sources on growth, bacterial resistance, and antioxidant ability of liver in common carp, Cyprinus carpio
192
Influence of dietary fat type on benzo(a)pyrene [B(a)P] biotransformation in a B(a)P-induced mouse model of colon cancer
193
Influence of dietary fat, on fatty acid composition and sensory properties of dry-cured Parma ham
194
Influence of Dietary Fermented Tapioca By-Products on the Performance of Broilers and Ducklings
195
Influence of Dietary Fiber Levels on Feed Utilization and Growth Performance in Poultry
196
Influence of dietary fish oil supplementation on humoral immune response and some selected biochemical parameters of broiler chickens
197
Influence of dietary ginger (Zingiber officinales Rosc) on oxidative stress induced by malathion in rats
198
Influence of Dietary Glutamine Supplementation on Growth Performance, Small Intestinal Morphology, Immune Response and Some Blood Parameters of Broiler Chickens
199
Influence of dietary glycosaminoglycans and Bifidobacterium longum in the gliadin-mediated inflammatory response(s) of intestinal epithelial cells (Caco-2)
200
Influence of dietary inclusion level of manganese on pork quality during retail display
201
Influence of dietary inorganic and organic copper salt and level of soybean oil on plasma lipids, metabolites and mineral balance of broiler chickens
202
Influence of dietary inorganic and organic form of copper salt on performance, plasma lipids and nutrient utilization of Black Bengal (Capra hircus) goat kids
203
INFLUENCE OF DIETARY INTAKE AND PHYSICAL ACTIVITY ON ANNUAL RHYTHM OF HUMAN BLOOD CHOLESTEROL CONCENTRATIONS
204
Influence of Dietary L-Carnitine on Productive Performance, Internal Organs and Carcass Characters of Two Duck Breeds Reared for Foie Gras Production
205
Influence of dietary lipid sources on carcass traits of broilers
206
Influence of dietary lipid sources on sensory characteristics of broiler meat
207
Influence of dietary lysine level, pre-slaughter fasting, and rendement napole genotype on fresh pork quality
208
Influence of Dietary Moringa oleifera Leaf Meal on Haematological Parameters, Serum Biochemical Indices and Weight of Internal Organs of Chickens
209
Influence of dietary nitrogen sources with different ruminal degradability on growth performance of Comisana ewe lambs
210
Influence of dietary nucleotides on growth performance and stress resistance in Kutum (Rutilus kutum Kamenskii, 1901)
211
Influence of dietary nutritional composition on caterpillar salivary enzyme activity
212
Influence of dietary oils and protein level on pork quality. 1. Effects on muscle fatty acid composition, carcass, meat and eating quality
213
Influence of dietary oils and protein level on pork quality. 2. Effects on properties of fat and processing characteristics of bacon and frankfurter-style sausages
214
Influence of dietary partially hydrogenated fat high in trans fatty acids on lipid composition and function of intestinal brush border membrane in rats
215
Influence of dietary phenolic acids on redox status of iron: Ferrous iron autoxidation and ferric iron reduction
216
Influence of dietary plant oils on mammary lipogenic enzymes and the conjugated linoleic acid content of plasma and milk fat of lactating goats
217
Influence of dietary polyunsaturated fatty acids on contractility, lusitropy and compliance of isolated rat myocardium
218
Influence of dietary prebiotic mixture (α-mune) on growth performance, haematology and innate immunity of Beluga sturgeon (Huso huso) juvenile
219
Influence of dietary protected lipids on intake and digestibility of straw based diets in Deccani sheep
220
INFLUENCE OF DIETARY PROTEIN LEVELS ON PRODUCTION RESULTS AND MORTALITY IN PHEASANTS REARED UNDER CONTROLLED CONDITIONS
221
Influence of dietary protein/lipid ratio on growth performance and body composition of Aspikutum, a new hybrid of Leuciscus aspius ♀ × Rutilus frisii ♂ (Teleostei: Cyprinidae)
222
Influence of dietary restraint and environmental factors on meal size in normal-weight women. A laboratory study
223
Influence of dietary rumen-degradable protein on bacterial growth in the rumen of sheep receiving different energy sources
224
Influence of dietary rumen-degradable protein supply on rumen characteristics and carbohydrate fermentation in beef cattle offered high-grain diets
225
Influence of dietary salt intake on the response of isolated perfused mesenteric veins of the dog to vasoactive agents
226
Influence of Dietary Saturated Fat Intake on Endothelial Fibrinolytic Capacity in Adults
227
Influence of dietary selenium and vitamin E on quality of veal
228
Influence of dietary selenium supplementation and exercise on thiol-containing enzymes in mice
229
Influence of dietary simulating solvents on the hardness of provisional restorative materials
230
Influence of dietary soy isoflavones on the accessory sex organs of the Wistar rat
231
Influence of Dietary Supplementation of Guava Leaf, Oxytetracycline, and Tert‐Butylhydroxytoluene on Growth Performance, Gut Microbial Population, Immune Status, Carcass, and Meat Quality in Broiler Chickens
232
Influence of Dietary Supplementation of Kigelia pinnata and Plukenetia conophora Leaves on Cytokine Expression, Immunoglobulins, Blood Chemistry, Caecal Microbiota and Meat Quality in Broiler Chickens
233
Influence of dietary supplementation of Rosmarinus officinalis L. on performances of dairy ewes organically managed
234
Influence of dietary supplementation with linseed and vitamin E on fatty acids, α-tocopherol and lipid peroxidation in muscles of broiler chicks
235
Influence of Dietary Supplementation with Selenium on Blood Metabolic Profile and Thyroid Hormones Activities in Fattening Lambs
236
Influence of Dietary Thyme Extract (Thymus vulgaris) on Performance, Purine Derivatives, Cellulase Activity and Ruminal Fermentation Parameters in Fattening Lambs and Goat Kids
237
Influence of dietary vitamin C and selenium, alone and in combination, on the composition and oxidative stability of meat of broilers
238
Influence of dietary Vitamin E level on egg production of broiler breeders, and on the growth and immune response of progeny in comparison with the progeny from eggs injected with Vitamin E
239
Influence of dietetic linoleic versus oleic fatty acid in LDL-c/APOB ratio
240
Influence of diethyl zinc on ethylene-norbornene copolymerization
241
Influence of diets enriched with different vegetable oils on the fatty acid profiles of snail Helix aspersa maxima
242
Influence of diets enriched with flaxseed oil on the α-linolenic, eicosapentaenoic and docosahexaenoic fatty acid in Nile tilapia (Oreochromis niloticus)
243
Influence of diets with cereal grains contaminated by graded levels of two Fusarium toxins on selected enzymatic and histological parameters of liver in gilts
244
Influence of difference in chemical compositions of rice straw on hydrogen formation in nickel-catalyzed steam gasification
245
Influence of Difference System Parameters on Operating Conditions of Third Harmonic Ground-Fault Protection System of Unit-Connected Generator
246
Influence of differences in porous structure within granules of activated carbon on adsorption of aromatics from aqueous solutions Original Research Article
247
Influence of differences in sensitivity of Spanish and German consumers to perceive androstenone on the acceptance of boar meat differing in skatole and androstenone concentrations
248
Influence of different additives on the synthesis of VO2 polymorphs
249
Influence of different aerobic pretreatments on the kinetics of anaerobic digestion of olive mill wastewater
250
Influence of different agricultural practices (type of crop, form of N-fertilizer) on soil nitrous oxide emissions
251
Influence of different Agrobacterium rhizogenes strains on hairy roots induction and secondary metabolites production in Datura innoxia Mill.
252
Influence of different amount of functionalized bulky gold nanorods dopant on the electrooptical, dielectric and optical properties of the FLC host
253
Influence of different amounts of FeCl3 on decomposition and hydrogen sorption kinetics of MgH2
254
Influence of different amounts of irrigation water on salt leaching and cotton growth under drip irrigation in an arid and saline area
255
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
256
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
257
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
258
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
259
Influence of different annealing conditions on the luminescent properties of Li2B4O7:Mn single crystals Original Research Article
260
Influence of different annealing temperatures and cooling rates on amorphous and crystalline composite coating
261
Influence of different approaches for calculating the athleteʹs mechanical energy on energetic parameters in the pole vault
262
Influence of different aspect ratio additives on the performance of lead–acid batteries
263
Influence of different atmospheric models and seeing effects on the nonlinear calibration Original Research Article
264
Influence of different autotransfusion devices on the quality of salvaged blood
265
Influence of different bentonites on the rare earth element concentrations of clarified Romanian wines
266
Influence of different biological environments on the stability of serotonin detection on carbon-based electrodes
267
Influence of different biomaterials on the viability of Aggregatibacter actinomycetemcomitans
268
Influence of Different Bonding Agents and Composite Resins on Fracture Resistance of Reattached Incisal Tooth Fragment
269
Influence of different bonding agents on the color stability of enamel after orthodontic bracket removal
270
Influence of different buffer gases on synthesis of few-layered graphene by arc discharge method
271
Influence of different buffer solutions on the performance of anodic Pt-Ru/C nanoparticle electrocatalysts for a direct methanol fuel cell
272
Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts
273
Influence of different carbon nanotubes on the electrical and mechanical properties of melt mixed poly(ether sulfone)-multi walled carbon nanotube composites
274
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study
275
Influence of different catalyst deactivation models in a validated simulator of an industrial UOP FCC unit with high-efficiency regenerator
276
Influence of different cellular transcription factors on the regulation of Varicella-zoster virus glycoproteins E (gE) and I (gI) UTR’s activity
277
Influence of different chemical cross-linking treatments on the properties of bovine pericardium and collagen
278
Influence of different chemical elements on irradiation-induced hardening embrittlement of RPV steels
279
Influence of different chemical reagents on the preparation of activated carbons from bituminous coal
280
Influence of Different Cleaning Conditions on Cleaning Performance of Pilot-Scale Pulse-Jet Baghouse
281
INFLUENCE OF DIFFERENT CO2 LEVELS ON THE GROWTH AND COMPETITION OF SOME IMPORTANT WEEDS IN WHEAT (Triticum aestivum L.)
282
Influence of different coffee drink preparations on ochratoxin A content and evaluation of the antioxidant activity and caffeine variations
283
Influence of different collagen species on physico-chemical properties of crosslinked collagen matrices
284
Influence of Different Colored Plastic Mulch on the Growth of Lettuce (Lactuca sativa)
285
Influence of different colour pigments on the properties of powder deposited organic coatings
286
Influence of different combinations of aluminum and iron electrode on electrocoagulation efficiency: Application to the treatment of paper mill wastewater Original Research Article
287
Influence of different concentrations of Al2(SO4)3 and anionic polyelectrolytes on tannery wastewater flocculation Original Research Article
288
Influence of different concentrations of disodium fumarate on methane production and fermentation of concentrate feeds by rumen micro-organisms in vitro
289
Influence of different concentrations of N-phenylaminopropyl – POSS on the thermodynamic fragility of the cured epoxy resin
290
Influence of different concentrations of Sildenafil Citrate on histological parameters of mice epididymis
291
Influence of different condylar and incisal guidance ratios to the activity of anterior and posterior temporal muscle
292
INFLUENCE OF DIFFERENT CONSTANT TEMPERATURE DEGREES AND HOST PLANTS ON CERTAIN BIOLOGICAL ASPECTS OF THE MELON LADYBIRD BEETLE Epilachna chrysomelina (F.) (COLEOPTERA: COCCINELLIDAE)
293
Influence of different cooling rates on the microstructure of the HAZ and welding CCT diagram of CLAM steel
294
Influence of different crosslinking treatments on the physical properties of collagen membranes
295
Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel
296
Influence of different cultivars–locations on maximum daily shrinkage indicators: Limits to the reference baseline approach
297
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Shortterm Biomass Enrichment
298
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment
299
Influence of different decalcifying agents on EGF and EGFR immunostaining
300
Influence of different demineralization treatments on physicochemical structure and thermal degradation of biomass
301
Influence of different deposition potentials on morphology and structure of CdSe films
302
Influence of different design parameters and Al2O3-water nanofluid flow on heat transfer and flow characteristics of sinusoidal-corrugated channels
303
Influence of different dietary forages on the fatty acid composition of rumen digesta as well as ruminant meat and milk
304
Influence of Different Dietary Levels of Energy and Protein on Reproductive and Post Hatch Growth Performance in Japanese Quails
305
Influence of different dietary protein levels and feeding frequencieson growth performance and feed utilization of the Giant freshwater prawn, Macrobrachium rosenbergii with the Nile tilapia, Oreochromus niloticus in polyculture
306
Influence of different dietary vitamin C levels on vitamin E and C content and oxidative stability in various tissues and stored m. longissimus dorsi of growing pigs
307
Influence of different diluents in Pt/Al2O3 catalyst on the hydrogenation of benzene, toluene and o-xylene Original Research Article
308
INFLUENCE OF DIFFERENT DIRECTIONS AND LEVELS OF THE POMEGRANATE TREES ON THE WHITEFLY Siphoninus phillyreae (HAL.) AND ITS PARASITOID Encarsia inaron (WALK.) AT KAFER EL-SHEIKH GOVERNORATE, EGYPT
309
Influence of different doses of progesterone treatments on ovarian follicle status in beef cows
310
Influence of different dry milling processes on the properties of an attapulgite clay, contribution of inverse gas chromatography
311
Influence of different drying methods on carotenoids and capsaicinoids of paprika (Cv., Jalapeno)
312
Influence of different edible coatings in minimally processed pumpkin (Cucurbita moschata Duch)
313
Influence of different electrolysis parameters on electrodeposition of γ- and α-Mn from pure electrolytes — a review with special reference to Russian language literature
314
Influence of different emission sources on atmospheric organochlorine patterns in Germany
315
Influence of different endodontic filling materials on root fracture susceptibility
316
Influence of different exchange correlation potentials on band structure and optical constant calculations of ZrGa2 and ZrGe2 single crystals
317
Influence of different excitation spectra on the measured carrier lifetimes in quasi-steady-state photoconductance measurements
318
Influence of different extraction methods on the yield and linalool content of the extracts of Eugenia uniflora L.
319
Influence of different factors in milk production on standard plate count of raw small ruminant’s bulk-tank milk in Switzerland
320
Influence of different factors on the adsorption of carbofuran (2,3-dihydro-2,2-dimethyl-7-benzofuranyl-N-methyl carbamate) on soils Original Research Article
321
Influence of different factors on the inactivation of Salmonella senftenberg by pulsed electric fields
322
Influence of different factors on the output power transferred into medium by ultrasound
323
Influence of different factors on the output power transferred into medium by ultrasound
324
Influence of different factors on the phase transitions of non-ionic Langmuir monolayers
325
Influence of different factors on the stability of biodiesel: A review
326
Influence of Different Factors on the Stiffness and Strength of Multilayer Composite Elements
327
Influence of different feeding systems on the growth performance and muscle development of Japanese Black steers
328
Influence of different fibre sources in diets for growing pigs on chemical composition of faeces and slurry and ammonia emission from slurry
329
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance
330
Influence of different fillers on phenolic resin abrasive composites. Comparison of inverse gas chromatographic and dynamic mechanical–thermal analysis characteristics
331
Influence of different floor management strategies of the vineyard on the natural yeast population associated with grape berries
332
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam
333
Influence of Different Forms of Plantain (Plantago lanceolata L.) Herb on Performance, Serum Metabolites, and Meat Quality of Broilers
334
Influence of different gas compositions on the short-term storage stability of mother-packaged retail-ready lamb packs
335
Influence of different gas compositions on the short-term storage stability of mother-packaged retail-ready lamb packs
336
Influence of different gel complexes on flavour and colour change in Chongcai paste during storage
337
influence of different genders of japanese quail on the functional state of kidneys
338
Influence of Different Genders of Japanese Quail on the Functional State of Kidneys
339
Influence of Different Genders of Japanese Quail on the Functional State of Kidneys
340
Influence of Different Glucose Concentrations on the Expression of miR-29c-3p microRNA in Mesenchymal Stem Cells
341
Influence of different growth and nucleation times on optical spectra of precipitated oxygen in silicon
342
Influence of different growth parameters and related conditions on 6H-SiC crystals grown by the modified Lely method
343
Influence of different growth parameters and related conditions on 6H-SiC crystals grown by the modified Lely method
344
Influence of different heat treatment parameters on microstructure and mechanical properties of C–Mn strapping quality steels
345
Influence of Different Heating Systems on the Bioavailable Fractions of Some Elements in House Dust
346
Influence of different host plant cultivars on nutritional indices of Plutella xylostella (Lepidoptera: Plutellidae)
347
Influence of different host plants on the biological characteristics of the seychellarum mealybug icerya seychellarum (westwood)
348
Influence of different hydrocarbons on the structure of CVD- and PACVD-TiCx hard layers
349
Influence of different hydrocarbons on the structure of CVD- and PACVD-TiCx hard layers
350
Influence of different hydrocolloids on major wheat dough components (gluten and starch) Original Research Article
351
Influence of different immobilization techniques for Candida cylindracea lipase on its stability and fish oil hydrolysis
352
Influence of different initial microstructure on the process of spheroidization in cold forging
353
Influence of different initial spore concentrations of Pasteuria penetrans on the infection of root-knot nematodes over three host crop cycles
354
Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content
355
Influence of different interlayers and bias voltage on the properties of a-C:H and a-C:H:Me coatings prepared by reactive d.c. magnetron sputtering
356
Influence of different ions doping on the antibacterial properties of MgO nanopowders
357
Influence of Different Irrigation Regimes on Carpogenic Germination of Sclerotia of Sclevotinia sclerotiorum
358
Influence of Different Irrigation Solutions and Instrumentation Techniques on the Amount of Apically Extruded Debris
359
Influence of different irrigation strategies in a traditional Cornicabra cv. olive orchard on virgin olive oil composition and quality
360
Influence of Different Isoforms of Recombinant Trophoblastic Interferons on Prostaglandin Production in Cultured Bovine Endometrial Cells
361
Influence of different land uses on soil nitrogen transformations after conversion from an Indian dry tropical forest
362
Influence of different layer microstructures induced by different gas compositions on corrosion behavior of plasma nitrided stainless steel
363
Influence of different levels of gypsum on growth, herb and essential oil yields of lemongrass
364
INFLUENCE OF DIFFERENT LEVELS OF PHOSPHORUS AND POTASSIUM ON GROWTH OF Leucaena leucocephala SEEDLINGS
365
INFLUENCE OF DIFFERENT LEVELS OF POTASSIUM ON GROWTH, YIELD AND QUALITY OF CANOLA (Brassica napus L.) CULTIVARS
366
Influence of different levels of traffic pollution on haemoglobin content in the earthworm Lumbricus terrestris
367
Influence of different light curing units on the cytotoxicity of various dental composites
368
Influence of different light sources on visual shade matching performance
369
Influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin
370
Influence of different maceration times on the anthocyanin composition of wines made from Vitis vinifera L. cvs. Boğazkere and Öküzgözü Original Research Article
371
Influence of different make-up air configurations on the fire-induced conditions in an atrium
372
Influence of different maltodextrins on properties of O/W emulsions
373
INFLUENCE OF DIFFERENT MEAL SIZES ON GROWTH CHARACTERISTICS OF YOUNG RAINBOW TROUT (ONCORHYNCHUS MYKISS WAL).
374
Influence of different means of turbine blade cooling on the thermodynamic performance of combined cycle
375
Influence of different mobile phase compositions on detection of Ochratoxin A
376
Influence of different modes of real time visual information on single aimed movements
377
Influence of different morphologies on electrochemical performance of spinel LiMn2O4
378
Influence of different natural physical fields on biological processes Original Research Article
379
Influence of different natural zeolite concentrations on the anaerobic digestion of piggery waste
380
Influence of different nitrate and iron availabilities on phosphoenolpiruvate carboxilase and malate dehydrogenase in roots of maize (Zea mays L.) plants
381
Influence of different nitrogen rates and DMPP nitrification inhibitor on annual N2O emissions from a subtropical wheat–maize cropping system
382
Influence of Different Nitrogen Sources on Amount of Chitosan Production by Aspergillus niger in Solid State Fermentation
383
Influence of different nitrogen to silica ratios and artificial mixing on the structure of a summer phytoplankton community from the Swedish west coast (gullmar fjord)
384
Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime
385
Influence of different outdoor design conditions on design cooling load and design capacities of air conditioning equipments
386
Influence of different oxidation states of chromium (VI, III) on soil urease activity
387
Influence of different parameters on calcium hexaluminate reaction sintering by Spark Plasma
388
Influence of different parameters on drug release from hydrogel systems to a biomembrane model. Evaluation by differential scanning calorimetry technique
389
Influence Of Different Pathological States On Adrenergic Control Of The Renal Hemodynamics: Shift In The Functionality Of The Renal Aradrenoceptors
390
Influence of different pectins on powder characteristics of microencapsulated anthocyanins and their impact on drug retention of shellac coated granulate Original Research Article
391
Influence of Different Percentages of Copper on the Size and Optical Properties of Ag-Cu Nanoparticles Formed by Wet-Chemical Method
392
Influence of different perovskite interlayers on the electrical conductivity between La0.65Sr0.3MnO3 and Fe/Cr-based steels
393
Influence of different plant species on water repellency in Mediterranean heathland soils
394
Influence of Different Planting Dates and Media on Growth of Kiwifruit (Cv. Hayward) Cuttings
395
Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests
396
Influence of different plasticizers on the response of chemical sensors based on polymeric membranes for nitrate ion determination
397
Influence of different polishing conditions on the skid resistance development of asphalt surface
398
Influence of different polymeric gels on the ectopic bone forming ability of an osteoinductive biphasic calcium phosphate ceramic
399
Influence of different polymerisation parameters on the separation efficiency of monolithic poly(phenyl acrylate-co-1,4-phenylene diacrylate) capillary columns
400
Influence of different post luting cements on the fracture strength of endodontically treated teeth: An in vitro study
401
Influence of different posts and cores on marginal adaptation, fracture resistance, and fracture mode of composite resin crowns on human mandibular premolars. An in vitro study
402
Influence of different post-treatments on the structure and optical properties of zinc oxide thin films
403
Influence of Different Power Outputs of Er:YAG Laser on Shear Bond Strength of a Resin Composite to Feldspathic Porcelain
404
Influence of different practices on biogas sustainability
405
Influence of different preservation treatments on the volatile fraction of desalted cod
406
Influence of different pre-treatment methods on isolation of extracts with strong antibacterial activity from lichen Usnea barbata using carbon dioxide as a solvent
407
Influence of different processing methods on the glycemic index of potato (Nicola)
408
Influence of different processing methods on the glycemic index of potato (Nicola)
409
Influence of different production strategies on the stability of color, oxygen consumption and metmyoglobin reducing activity of meat from Ningxia Tan sheep
410
Influence of Different Proportions of External Irrigation During the Er,Cr:YSGG Laser Irradiation on Wear and Roughness of Root Surface
411
Influence of different proteolytic strains of Streptococcus thermophilus in co-culture with Lactobacillus delbrueckii subsp. bulgaricus on the metabolite profile of set-yoghurt
412
Influence of different purification and drying methods on rheological properties and viscoelastic behaviour of durian seed gum
413
Influence of different rare earth ions on hydrogen transfer over Y zeolite Original Research Article
414
Influence of different rates of nitrogen fertilizer on growth, yield and fruit quality of sweet pepper (Capsicum annum L. var. California Wander)
415
Influence of different reproductive rhythms on serum estradiol and testosterone levels, features of follicular population and atresia rate, and oocyte maturation in controlled suckling rabbits
416
Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets
417
Influence of different ruthenium(II) bipyridyl complex on the photocatalytic H2 evolution over TiO2 nanoparticles with mesostructures
418
Influence of different salts in poly(vinylidene fluoride-co-trifluoroethylene) electrolyte separator membranes for battery applications
419
Influence of different seeds on transformation of aluminum hydroxides and morphology of alumina grains by hot-pressing
420
Influence of different selenium sources on performance, blood and meat selenium content of fattening lambs
421
Influence of different semen extenders and seminal plasma on the inflammatory response of the endometrium in oestrous mares
422
Influence of different shortening velocities preceding stretch on human triceps surae moment generation in vivo
423
Influence of different shrinking temperatures and vacuum conditions on the ability of psychrotrophic Clostridium to cause ‘blown pack’ spoilage in chilled vacuum-packaged beef
424
Influence of different silica derivatives in the immobilization and stabilization of a Bacillus licheniformis protease (Subtilisin Carlsberg)
425
Influence of different site symmetries of Eu3+ centers on the luminescence properties of Anderson-based compounds
426
Influence of Different Sites on Lilium Flower and Bulb Production in Cold Desert Region of Himachal Pradesh, India
427
Influence of different smoke generation methods on the contents of polycyclic aromatic hydrocarbons (PAH) and phenolic substances in Frankfurter-type sausages
428
Influence of different soluble dietary fibers on the bioaccessibility of the minor Fusarium mycotoxin beauvericin
429
Influence of different solvent polarities on the phenolics, flavonoids and antioxidant properties of the fruit of Xylopia aethiopica (Dunal) A. Rich
430
Influence of different solvent polarities on the phenolics, flavonoids and antioxidant properties of the fruit of Xylopia aethiopica (Dunal) A. Rich
431
INFLUENCE OF DIFFERENT SOURCES AND LEVELS OF NITROGEN AND ROCK PHOSPHATE ADDITION ON MAIZE PRODUCTIVITY AND SOIL FERTILITY
432
Influence of different sources of error on estimated kinetics parameters for a second-order reaction
433
Influence of Different Sources of Natural Pigmenting on Egg Quality and Performance of Laying Hens
434
Influence of different spacer arms on Mimetic Ligand™ A2P and B14 membranes for human IgG purification
435
Influence of Different Steam Cooling Techniques for High Pressure Turbine Blades on the Performance of Gas Turbine
436
Influence of different sterilization methods on callus initiation and production of pigmented callus in Arnebia densiflora Ledeb.
437
Influence of Different Storage Conditions on the Mycotoxin Production and Quality of Fusarium-Infected Wheat Grain
438
Influence of Different Storage Media, Temperatures and Time Duration on Susceptibility of Ornithobacterium rhinotracheale
439
Influence of different storage times and temperatures on blood gas and acid-base balance in ovine venous blood
440
Influence of different strains of Agrobacterium rhizogenes, culture medium, age and type of explant on hairy root induction in Echinacea angustifolia
441
Influence of Different Strains of Azotobacter on Essential Oil Components of Garden Thyme
442
Influence of different structured channels of mesoporous silicate on the controlled ibuprofen delivery
443
Influence of Different Subsistence States of CeO2-ZrO2 Mixed Oxides in Catalyst Coating on Catalytic Properties
444
INFLUENCE OF DIFFERENT SUGAR CRYOPROTECTANTS ON THE STABILITY AND PHYSICO-CHEMICAL CHARACTERISTICS OF FREEZE-DRIED 5-FLUOROURACIL PLURILAMELLAR VESICLES
445
Influence of different sugars on pullulan production and activities of α-phosphoglucose mutase, UDPG-pyrophosphorylase and glucosyltransferase involved in pullulan synthesis in Aureobasidium pullulans Y68
446
Influence of different sugars on pullulan production and activities of α-phosphoglucose mutase, UDPG-pyrophosphorylase and glucosyltransferase involved in pullulan synthesis in Aureobasidium pullulans Y68
447
Influence of different sulfur compounds on corrosion due to naphthenic acid
448
Influence of Different Sulphate Salts as Anolytes Towards the Performance of Copper(II) Recovery by using an Electrogenerative Process
449
Influence of different surface modification technologies on friction of conformal tribopair in mixed and boundary lubrication regimes
450
Influence of different surface modification treatments on poly( , -lactic acid) with silk fibroin and their effects on the culture of osteoblast in vitro
451
Influence of different surface treatments on microshear bond strength of repair resin composite to two CAD/CAM esthetic restorative materials
452
Influence of different surface treatments on surface zirconia frameworks
453
Influence of different surface treatments on surface zirconia frameworks
454
Influence of Different Surface Treatments on the Shear Bond Strength of Resin Cement to Base Metal Alloys
455
Influence of different surfactants on crystal growth behavior and sinterability of La2Ce2O7 solid solution
456
Influence of different suspension stabilizers on the preparation of Rubitherm RT31 microcapsules
457
Influence of Different Tapered Implants on Stress and Strain Distribution in Bone and Implant: A Finite Element Analysis
458
INFLUENCE OF DIFFERENT TEHNOLOGICAL PROCEDURES ON QUALITY OF MALVASIA WINE
459
Influence of different temperature regimes on seed setting behavior and productivity traits in rabi sorghum
460
Influence of different temperatures on bud break and 1-aminocyclopropane-1-carboxylic acid content of young peach trees
461
INFLUENCE OF DIFFERENT TEMPERATURES ON THE BIOLOGICAL ASPECTS OF Eutetranychus africanus (Tucker) (ACARI:TETRANYCHIDAE:PROSTIGMATA)
462
Influence of different templates on the textured Bi0.5(Na1−xKx)0.5TiO3 piezoelectric ceramics by the reactive templated grain growth process
463
Influence of different tillage practices and earthworm on selected soil physio-chemical parameters and yield of maize
464
Influence of different treatment planning techniques on radiation doses to the heart, left anterior descending coronary artery and left lung in the radiotherapy of left-sided breast cancer patients
465
Influence of different treatments on characteristics of nanooxide powders alone or with adsorbed polar polymers or proteins
466
Influence of Different Types and Amounts of Organic Manure on Soil Physical Properties, Wheat (Triticum aestivum L.) Yield and Correlation between Traits
467
Influence of different types and proportions of added edible seaweeds on characteristics of low-salt gel/emulsion meat systems
468
Influence of different types of bedding materials on immune response and serum biochemical profile of caged mice
469
Influence of different types of carbon nanotubes on muscle cell response
470
Influence of different types of exercise on the expression of haem oxygenase-1 in leukocytes
471
Influence of different types of fertilisers on the major antioxidant components of tomatoes
472
Influence of different types of fertilisers on the major antioxidant components of tomatoes
473
Influence of different types of heating systems on particulate air pollutant deposition: The case of churches situated in a cold climate
474
Influence of different types of surface electrodes on amplitude, area and duration of the compound muscle action potential
475
Influence of different ureas on aggregational properties of aqueous surfactant systems
476
INFLUENCE OF DIFFERENT VARIETIES AND PLANTING DATES ON THE MAIN PESTS INFESTING KIDNEY BEANS.
477
Influence of Different Vehicles on the pH and Surface Tension of Calcium Hydroxide Pastes
478
Influence of different volume ratios on the isodispersion point in sequential injection analysis
479
Influence of different water quantities and qualities on lemon trees and soil salt distribution at the Jordan Valley
480
INFLUENCE OF DIFFERENT WEED MANAGEMENT PRACTICES ON YIELD OF GARLIC CROP
481
Influence of different yeast cell-wall mutants on performance and protection against pathogenic bacteria (Vibrio campbellii) in gnotobiotically-grown Artemia
482
Influence of different β-glucans on the physical and rheological properties of egg yolk stabilized oil-in-water emulsions
483
Influence of differential compaction above basement steps on salt tectonics in the Ligurian-Provençal Basin, northwest Mediterranean
484
Influence of differential diffusion on maximum flame temperature in turbulent nonpremixed hydrogen/air flames
485
Influence of differentially heated horizontal walls on the streaming shape and velocity in a standing wave resonator
486
Influence of differently modified palygorskites in the immobilization of a lipase
487
Influence of differing radiotherapy strategies on treatment results in diffuse large-cell lymphoma: a review
488
Influence of diffuse sources on levels and distribution of polychlorinated biphenyls in the Guadiana River estuary, Portugal
489
Influence of Diffusion and Gravity on the Adhesion of a Two-component Mixture of Hard Spheres on a Flat Surface
490
Influence of diffusion coefficient on chloride ion penetration of concrete structure
491
Influence of diffusion layer properties on low temperature DMFC
492
Influence of diffusion of fuel-efficient motor vehicles on gasoline demand for individual user owned passenger cars
493
Influence of diffusion of magnetic particles on stability of a static magnetic fluid seal under the action of external pressure drop
494
Influence of diffusion on nonradiative energy transfer between FMN molecules in aqueous solutions
495
Influence of diffusion on W sputtering by carbon
496
Influence of diffusional stress relaxation on growth of stoichiometric precipitates in binary systems Original Research Article
497
Influence of digital current control strategy on the sensitivity to electrical parameter uncertainties of induction motor indirect field-oriented control
498
Influence of digitalis on left ventricular functional response to exercise in congestive heart failure
499
Influence of dihedral angle on the seismic velocities in partially molten rocks
500
Influence of Dihydrogen and Water Vapor on the Kinetics of CO Oxidation over Au/Al2O3
501
Influence of Dilation Angle of Soil on Seismic Displacements of Gravity Retaining Walls using Upper Bound Limit Analysis Method
502
Influence of diluent and sample processing methods on the recovery of the biocontrol agent Pantoea agglomerans CPA-2 from different fruit surfaces
503
Influence of diluent compositions on the porous structure of methacrylate derivatives of aromatic diols and divinylbenzene
504
Influence of diluent on amine extraction of pyruvic acid using Alamine system
505
Influence of dilute acid and alkali pretreatment on reducing sugar production from corncobs by crude enzymatic method: A comparative study
506
Influence of dilute silicon addition on the oxidation resistance and tensile properties of modified Zircaloy-4
507
Influence of dilution on the strong first-order phase transition of the 3D 4-state Potts model Original Research Article
508
Influence of dilution on the thermophysical properties of Dax peloid (TERDAX®)
509
Influence of dimensional stability of impression materials on the probability of acceptance of a prosthetic restoration
510
Influence of dimethyl formamide pulping of bagasse on pulp properties
511
Influence of dimethyl formamide pulping of wheat straw on cellulose degradation and comparison with Kraft process
512
Influence of Dimethyl Sulfoxide as a Penetration Enhancer of Piroxicam Gel Through Biological Skin
513
Influence of Dimilin on a microsporidian infection in the gypsy moth Lymantria dispar (L.) (Lepidoptera: Lymantriidae)
514
Influence of diosgenin structure on the polymerization kinetics of acrylamide: An experimental and theoretical approach
515
Influence of Dioxin and Metal-Contaminated Sediment on Phase I and II Biotransformation Enzymes in Silver Crucian Carp
516
Influence of dipalmitoylphosphatidylcholine on the dissolution of Brazilian chrysotile
517
Influence of dip-coated boron nitride interphase on mechanical and dielectric properties of SiCf/SiC composites
518
Influence of diphenyliodonium hexafluorophosphate on the bond strength and mechanical properties of model resin cements
519
Influence of dipicolinate ligands on the spectroscopic properties of europium(III) in solution
520
Influence of dipolar interactions on the conduction mechanism of Li+-β-alumina: Molecular Dynamics study
521
Influence of dipole moments on light-emitting features of cardo-type 1H-pyrazolo[3,4-b]quinolines
522
Influence of dipping on thin-layer drying characteristics of seedless grapes
523
Influence of direct and delayed chilling of excised female buffalo muscles on their textural quality
524
Influence of direct current plasma magnetron sputtering parameters on the material characteristics of polycrystalline copper films
525
Influence of direct referrals on time to diagnosis after an abnormal breast screening result
526
Influence of directional strength-to-stiffness on the elastic–plastic transition of fcc polycrystals under uniaxial tensile loading Original Research Article
527
Influence of disbond on notch crack behaviour in single bonded lap joints
528
Influence of discard mineral matter on slag–liquid formation and ash melting properties of coal – A FACTSAGETM simulation study
529
Influence of discharge conditions on the charge decay characteristics
530
Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature
531
Influence of discretization in image space on Hough transform
532
Influence of discretization in image space on Hough transform
533
Influence of discrimination awareness on the occupational interests of African American children
534
Influence of discrimination awareness on the occupational interests of African American children
535
Influence of disease burden, public perception, and other factors on new vaccine development, implementation, and continued use
536
Influence of disinfectants on domestic wastewater treatment plant performance
537
Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations Original Research Article
538
Influence of dislocation glide on the spinodal decomposition of fatigued duplex stainless steels
539
Influence of dislocation networks on the relaxation peaks at intermediate temperature in pure metals and metallic alloys
540
Influence of dislocation on interaction between a crack and a circular inhomogeneity
541
Influence of dislocation stress field on distribution of quantum dots
542
Influence of disorder in crystal structure on ferroelectric phase transitions
543
Influence of disorder on electrical transport and magnetic properties of HCl-doped polyaniline pellets
544
Influence of disorder on electronic structure and magnetic properties in Fe-rich Fe–Si alloys
545
Influence of disorder on microcavity polariton linewidths
546
Influence of disorder on the magnetic properties of FeAl alloys: theory
547
Influence of disorder on the rupture process of fibrous materials
548
Influence of disorders on the focusing property of photonic quasicrystal slab
549
Influence of dispersal, stochasticity, and an Allee effect on the persistence of weed biocontrol introductions
550
Influence of dispersal, stochasticity, and an Allee effect on the persistence of weed biocontrol introductions
551
Influence of dispersant on bound water content in coal–water slurry and its quantitative determination
552
Influence of dispersant on powders dispersion and properties of zirconia green compacts
553
Influence of dispersant on the morphology of silica-coated cobalt nanoparticles synthesized by a wet based method
554
Influence of dispersant on Y2O3: Eu3+ powders synthesized by combustion method
555
Influence of dispersant size on rheology of non-aqueous ceramic particle suspensions
556
Influence of dispersant structure and mixing speed on concrete slump retention
557
Influence of dispersant structure on the rheological properties of highly-concentrated zirconia dispersions
558
Influence of dispersant, storage time and temperature on the rheological properties of zirconia–paraffin feedstocks for LPIM
559
Influence of dispersants on bioconcentration factors of seven organic compounds with different lipophilicities and structures
560
Influence of dispersants on the solubility of calcined kaolin
561
Influence of dispersed aerosil particles on the collective dynamic modes in a ferroelectric liquid crystal with polarization sign reversal
562
Influence of dispersed particles on small and large deformation properties of concentrated caseinate composites
563
Influence of dispersibility and coagulation on the dust explosion risk presented by powders consisting of nm-particles
564
Influence of dispersion conditions of two pharmaceutical grade clays on their interaction with some tetracyclines
565
Influence of dispersion forces on phase equilibria between thin liquid films and their vapour
566
Influence of dispersion in myosin filament orientation and anisotropic filament contractions in smooth muscle
567
Influence of dispersion of multi-walled carbon nanotubes on the electrochemical performance of PEDOT–PSS films
568
Influence of Dispersion on Transport of Tracer through Unsaturated Porous Media
569
Influence of dispersion solvent for catalyst ink containing sulfonated poly(ether ether ketone) on cathode behaviour in a direct methanol fuel cell
570
Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites Original Research Article
571
Influence of disposal configurations on hydrogeological behaviour of sulphidic paste tailings: A field experimental study
572
Influence of disposal depth on the size of CO2 droplets produced from a circular orifice
573
Influence of dissolution on the mechanical behaviour of saturated deep argillaceous rocks
574
Influence of dissolved air on the effectiveness of cyclic backwashing in submerged membrane systems
575
Influence of Dissolved Carbon Dioxide on the Growth of Spoilage Bacteria
576
Influence of dissolved gas and temperature on the light yield of new liquid scintillators
577
Influence of dissolved gas and temperature on the light yield of new liquid scintillators
578
Influence of dissolved humic substances on the leaching of MCPA in a soil column experiment
579
Influence of dissolved hydrogen on recrystallization and recovery of mechanical properties of deformed palladium
580
Influence of dissolved hydrogen on the fatigue crack growth behaviour of AISI 4140 steel
581
Influence of dissolved organic carbon content on modelling natural organic matter acid–base properties
582
Influence of dissolved organic carbon source, photocatalyst identity and copper(II) ions on the formation of bromoform in irradiated titanium dioxide suspensions
583
Influence of dissolved organic matter in natural and simulated water on the photochemical decomposition of butylparaben
584
Influence of dissolved organic matter on estrone removal by NF membranes and the role of their structures
585
Influence of dissolved organic matter on particle-water interactions of Co, Cu and Cd under estuarine conditions
586
Influence of dissolved oxygen on Fe(II) and Fe(III) sorption onto chitosan
587
Influence of dissolved oxygen tension and agitation speed on alginate production and its molecular weight in cultures of Azotobacter vinelandii☆
588
Influence of dissolved silicate on vertical flux of particulate biogenic matter
589
Influence of dissolved solids on the mechanism of freeze–thaw conditioning
590
Influence of distance on the motivation and frequency of household recycling
591
Influence of distributed flow losses and gains on the estimation of transient storage parameters from stream tracer experiments
592
Influence of distributed wind generation and load composition on voltage sags
593
Influence of distribution of oxide contaminants on fatigue behavior in AZ31 Mg alloy recycled by solid-state processing
594
Influence of disturbance and nitrogen addition on plant and soil animal diversity in grassland
595
Influence of disturbance and nitrogen addition on plant and soil animal diversity in grassland
596
Influence of disturbances generated by the nozzle boundary layer on the heat exchange on the cylindrical nose of a body in a hypersonic flow
597
Influence of disturbances in municipal waste incineration plants on catalytic converters
598
Influence of disturbances on the control of PC-mouse, goal-directed arm movements
599
Influence of diuretics on the concentration of proteins and other components of pleural transudates in patients with heart failure
600
Influence of Diurnal Blood Pressure Variations on Target Organ Abnormalities in Adolescents With Mild Essential Hypertension
601
Influence of divalent metal cation Zinc doping on the structural and magnetic characterization of hemataite: α-Fe2O3
602
Influence of divalent metal on the decomposition products of hydrotalcite-like ternary systems MII–Al–Cr (MII = Zn, Cd)
603
Influence of diversionary foods on vole (Microtus montanus and Microtus longicaudus) populations and feeding damage to coniferous tree seedlings
604
Influence of division cone angles between the fuel-rich and the fuel-lean ducts on gas–particle flow and combustion near swirl burners
605
Influence of DLC coating thickness on tribological characteristics under sliding rolling contact condition
606
Influence of d-limonene absorption on the physical properties of refillable PET
607
Influence of DMSO on the electroreductive Ru(bpy)(CO)2Cl2 (bpy = 2,2′-bipyridine) polymer film formation
608
Influence of DNA Binding on the Degradation of Oxidized Histones by the 20S Proteasome
609
Influence of DNA double-strand break rejoining on clonogenic survival and micronucleus yield in human cell lines
610
Influence of DNA End Structure on the Mechanism of Initiation of DNA Unwinding by the Escherichia coli RecBCD and RecBC Helicases
611
Influence of dobutamine or exercise stress on the results of pulsed-wave Doppler assessment of myocardial velocity,
612
Influence of DOC on fouling of a PVDF ultrafiltration membrane modified by nano-sized alumina Original Research Article
613
INFLUENCE OF DOCKING AND DITERY ENERGY ON CARCASS COMPOSITION OF BADGHISIAN SHEEP
614
Influence of Dog-Bone Apex on Shape During Slab Horizontal Rolling Process Original Research Article
615
Influence of dolomite microcrystals on the technological properties of Santa Cruz de Mudela clays used for building ceramics
616
Influence of dolomitization process on the geochemistry of the carbonate and clastic aquifers induced by vertical flow , Kuwait
617
Influence of domain boundaries on polarity of GaN grown on sapphire
618
Influence of domain orientation on the mechanical properties of lead zirconate titanate piezoelectric ceramics
619
Influence of domain switching zones on the fracture toughness of ferroelectrics
620
Influence of Domain-General Abilities and Prior Division Competence on Fifth-Graders’ Fraction Understanding
621
Influence of domestic hot water parameters on the energy consumption of large buildings in Senegal
622
Influence of donor and acceptor substitutions on the extrinsic behaviour of PZT piezoceramics
623
Influence of donor co-doping by niobium or fluorine on the conductivity of Mn doped and Mg doped PZT ceramics
624
Influence of door-to-balloon time on mortality in primary angioplasty results in 3,648 patients in the second national registry of myocardial infarction (NRMI-2)
625
Influence of dopaminergic and serotoninergic genes on working memory in healthy subjects
626
Influence of dopant anions on properties of polypyrrole nanocoated poly(styrene-co-methacrylic acid) particles
627
Influence of dopant concentration on the structure and physical properties of NdimagePbimageMnOimage single crystals
628
Influence of dopant ions on properties of conducting polypyrrole and its electrocatalytic activity towards methanol oxidation
629
Influence of dopant level on structural, optical and magnetic properties of Co-doped anatase TiO2 nanoparticles
630
Influence of dopant size on the junction properties of polyaniline
631
Influence of dopant structure and charge on supercapacitive behavior of polypyrrole electrodes with high mass loading
632
Influence of dopants on atomic migration and void formation in molten Ge2Sb2Te5 under high-amplitude electrical pulse Original Research Article
633
Influence of dopants on the crystallization of borosilicate glass
634
Influence of doped PEDOT:PSS on the performance of polymer solar cells
635
Influence of doped rare earth elements on electronic properties of the R0.25Ca0.75MnO3 systems
636
Influence of doping and buffer layers on Pb(Zr,Ti)O3 thin films derived from inorganic zirconium precursor
637
Influence of doping and heat treatments on carriers mobility in polycrystalline silicon thin films for photovoltaic application
638
Influence of doping anion on electrochemical and physical properties of polyselenienyl thiophene polymer
639
Influence of doping concentration on Ni-induced lateral crystallization of amorphous silicon films
640
Influence of doping level on shift of the absorption edge of gallium nitride films (Burstein-Moss effect)
641
Influence of doping on electronic instabilities in poly(phthalidylidenearylene)s
642
Influence of Doping on K2SO4 Crystal Properties
643
Influence of doping on physical properties of vitreous As2Se3
644
Influence of doping on thermal stability of Si/Si1−xGex/Si heterostructures
645
Influence of doping the pump-chamber material in a flashlamp pumped Er:YAG laser
646
Influence of doping with various cations on electrical conductivity of apatite-type neodymium silicates
647
Influence of dose, dose interval and administration route of recombinant human soluble tumour necrosis factor receptor type I on orthodontic tooth movement in rats
648
INFLUENCE OF DOSE, FREQUENCY, AND DURATION OF INFUSED GONADOTROPIN-RELEASING HORMONE ON SECRETION OF LUTEINIZING HORMONE AND FOLLICLE-STIMULATING HORMONE IN NUTRITIONALLY ANESTROUS BEEF COWS
649
Influence of DOTA Chelators on Radiochemical Purity and Biodistribution of 177Lu- and 90Y-Rituximab in Xenografted Mice
650
Influence of double aging on microstructure and yield strength of AEREX™ 350
651
Influence of double promotion on HDS catalysts prepared by urea-matrix combustion synthesis Original Research Article
652
Influence of double slot suction (injection) into water boundary layer flows over sphere
653
Influence of double-tip scratch and single-tip scratch on nano-scratching process via molecular dynamics simulation
654
Influence of down-regulation of caspase-3 by siRNAs on sodium-butyrate-induced apoptotic cell death of Chinese hamster ovary cells producing thrombopoietin
655
Influence of draft tube cross-sectional geometry on KLa and in jet loop bioreactors (JLB)
656
Influence of drainage from old mine deposits on benthic macroinvertebrate communities in central Swedish streams
657
Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming
658
Influence of drawbead geometry on sheet metal forming
659
Influence of Dried Lemon, Ginger and Cumin in Weight Reduction and Some Biochemical Parameters in Rats Suffering from Obesity
660
Influence of Drill Dynamics on Bore Quality
661
Influence of drill parameters on bone temperature and necrosis: A FEM modelling and in vitro experiments
662
Influence of drinking water with quebracho tannin on intake of endophyte-infected tall fescue by cattle
663
Influence of drip and furrow irrigation systems on nitrogen oxide emissions from a horticultural crop
664
Influence of drip and furrow irrigation systems on nitrogen oxide emissions from a horticultural crop
665
INFLUENCE OF DRIP IRRIGATION OPERATING AND MANAGEMENT USING SOLAR PHOTOVOLTAIC WATER PUMPING ON STRAWBERRY YIELD INSIDE GREENHOUSES
666
Influence of drivers’ comprehension of posted signs on their safety related characteristics
667
Influence of driving cycles on Euro 3 scooter emissions and fuel consumption
668
Influence of driving cycles on unit emissions from passenger cars
669
Influence of driving patterns on life cycle cost and emissions of hybrid and plug-in electric vehicle powertrains
670
Influence of drizzle on Z–M relationships in warm clouds
671
Influence of droplet kinetic energy flux density from fixed spray-plate sprinklers on soil infiltration, runoff and sediment yield
672
Influence of droplet mutual interaction on carbon dioxide capture process in sprays
673
Influence of droplet size on the release of atomic sodium from a burning black liquor droplet in a flat flame
674
Influence of drought and litter age on Collembola communities
675
Influence of drought stress and Chitosan on fatty acid compounds of rapeseed varieties
676
Influence of drought stress on grain composition and cooking attributes of Iranian rice mutants
677
Influence of drought stress on nutritive value of perennial forage legumes
678
Influence of drought stress on photosynthetic characteristics and protective enzymes in plants
679
Influence of drought stress on some traits in five mung bean (Vigna radiata (L.) R. Wilczek) genotypes
680
Influence of drought stress on the cellular ultrastructure and antioxidant system in leaves of drought-tolerant and drought-sensitive apple rootstocks
681
Influence of drought, salt stress and abscisic acid on the resistance of tomato to Botrytis cinerea and Oidium neolycopersici
682
Influence of drug polarity upon the solid-state structure and release properties of self-emulsifying drug delivery systems in relation with water affinity
683
INFLUENCE OF DRUM CHIPPER SETTING ON THE WOOD CHIPS PERFORMANCE
684
Influence of dry and humid gaseous atmosphere on the thermal decomposition of calcium chloride and its impact on the remove of heavy metals by chlorination
685
Influence of dry and wet ball milling on dispersion characteristics of the multi-walled carbon nanotubes in aqueous solution with and without surfactant
686
Influence of dry and wet curing conditions on compressive strength of silica fume concrete
687
Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill
688
Influence of dry- and wet-milling processes on physicochemical properties, syneresis, pasting profile and microbial count of job’s tear flour
689
Influence of dry density and water content on the swelling of a compacted bentonite
690
Influence of dry grinding in a ball mill on the length of multiwalled carbon nanotubes and their dispersion and percolation behaviour in melt mixed polycarbonate composites
691
Influence of dry grinding on talc and kaolinite morphology: inhibition of nano-bubble formation and improved dispersion
692
Influence of dry heat treatment of canola meal on site and extent of nutrient disappearance in ruminants
693
Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools
694
Influence of dryer type on the performance of a biomass gasification combined cycle co-located with an integrated pulp and paper mill
695
Influence of drying and ageing on the stabilization of earthworm (Lumbricidae) casts
696
Influence of drying and cooking process on the phytochemical content, antioxidant and hypoglycaemic properties of two bell Capsicum annum L. cultivars
697
Influence of Drying and Extraction Methods on Yield and Chemical Composition of the Essential Oil of Eucalyptus sargentii
698
Influence of drying and extraction methods on yield and chemical composition of the essential oil of Satureja hortensis
699
Influence of drying and HEMA treatment on dentin wettability
700
Influence of drying and hydrothermal treatment of corn on the denaturation of salt-soluble proteins and color parameters Original Research Article
701
Influence of drying and water supplying after drying on tensile strength of cement mortar Original Research Article
702
Influence of drying conditions on the effective moisture diffusivity and energy requirements during the drying of pretreated and untreated pumpkin
703
Influence of drying conditions on the effective moisture diffusivity, energy of activation and energy consumption during the thin-layer drying of berberis fruit (Berberidaceae)
704
Influence of drying method and rehydration time on sensory evaluation of rehydrated carrot particulates Original Research Article
705
Influence of drying method on morphology and properties of asymmetric cellulose hollow fiber membrane
706
Influence of drying method on steviol glycosides and antioxidants in Stevia rebaudiana leaves
707
Influence of drying methods on drying of bell-pepper (Capsicum annuum) Original Research Article
708
Influence of drying on the content of sugars in wet processed green Arabica coffees
709
Influence of drying process on the biomass-based polygeneration system of bioethanol, power and heat
710
Influence of drying temperature and duration on fiber properties of unbleached wheat straw pulp
711
Influence of drying temperature on functional properties of wet-milled starch granules
712
Influence of drying temperature on functional properties of wet-milled starch granules
713
INFLUENCE OF DRYING TEMPERATURE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF RUBBERWOOD
714
Influence of drying temperature on the solubility, the purity of isolates and the electrophoretic patterns of corn proteins
715
Influence of drying temperature on the spaghetti cooking quality Original Research Article
716
Influence of drying temperature on the wet-milling performance and the proteins solubility indexes of corn kernels Original Research Article
717
Influence of drying time and temperature on bond strength of contemporary adhesives to dentine
718
Influence of drying time and temperature on bond strength of contemporary adhesives to dentine
719
Influence of drying treatment to electrochemically roughened Ag substrates on the corresponding surface-enhanced Raman scattering performances
720
Influence of dry–wet cycles on the interrelationship between aggregate, particulate organic matter, and microbial community dynamics
721
Influence of dry–wet cycles on the interrelationship between aggregate, particulate organic matter, and microbial community dynamics
722
Influence of DT fuel composition on the energy output and its implications on reactor safety and environmental acceptability
723
Influence of duct aspect ratio on heat/mass transfer in coolant passages with rotation
724
Influence of ductile damage on the bending behaviour of aluminium alloy thin sheets
725
Influence of duodenal infusion of L-methionine and L-methionine-dl-sulfoxide on amino acid concentration and duodenal electrical activity in Friesian calves
726
Influence of duration of supplementation with ruminally protected linseed oil on the fatty acid composition of feedlot lambs
727
Influence of duration of thermal comfort provision on heating behavior of buildings
728
Influence of dust composition on cloud droplet formation
729
Influence of dust mass distributions on generalized Jeans-Buneman instabilities in dusty plasmas
730
Influence of dust on the dynamics of the martian atmosphere above the first scale height
731
Influence of dust pollution on power frequency discharges in rod gaps placed in parallel with insulating spacer
732
Influence of dust shape and material composition on the solar F-corona
733
Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni–CeO2 nanocomposite coating
734
Influence of dwell time on fatigue crack growth in nickel-base superalloys
735
Influence of dwell time on fatigue crack growth in nickel-base superalloys
736
Influence of dwell time on fatigue crack growth in nickel-base superalloys
737
Influence of Dy content on the structure and giant magnetoresistance of Dyx(Co40Ag60)100−x granular films
738
Influence of dye chemistry and electrolyte solution on interfacial processes at nanostructured ZnO in dye-sensitized solar cells
739
Influence of dyes, salts and auxiliary chemicals on the nanofiltration of reactive dye baths: experimental observations and model verification Original Research Article
740
Influence of Dynamic and Static Interference on the Internal Flow and Vibration and Noise Characteristics of Marine Centrifugal Pump
741
Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation
742
Influence of dynamic conditions on aerosol enrichment factor in the coastal area
743
Influence of dynamic densification on nanostructure formation in Ti5Si3 intermetallic alloy and its bulk properties
744
Influence of dynamic densification on nanostructure formation in Ti5Si3 intermetallic alloy and its bulk properties
745
Influence of dynamic environment with different airflows on human performance
746
Influence of dynamic sodium environment on the creep–fatigue behaviour of Modified 9Cr–1Mo ferritic–martensitic steel
747
Influence of dynamic strain ageing on mixed mode I/III fracture toughness of Armco iron
748
Influence of dynamic strain aging on the deformation behavior during ratcheting of a 316LN stainless steel
749
Influence of dynamic strain aging on the dislocation structure developed in Zircaloy-4 during low-cycle fatigue
750
Influence of dynamic strain aging on the ductile tearing of C–Mn steels: modelling by a local approach method
751
Influence of dynamic strain aging pre-treatment on creep-fatigue behavior in 316L stainless steel
752
Influence of dynamic strain aging pre-treatment on the low-cycle fatigue behavior of modified 9Cr–1Mo steel
753
Influence of dynamic tortuosity and compressibility on the propagation of transient waves in porous media
754
Influence of dynamical noise on time series generated by nonlinear maps
755
Influence of dysphoria on positive and negative cognitive reactivity to daily mood fluctuations
756
Influence of dysprosium doping on the electrical and optical properties of CdO thin films
757
Influence of dysprosium oxide doping on thermophysical properties of LaMgAl11O19 ceramics
758
Influence of e+e− pair creation in collision of laser and high energy photons for photon-photon colliders
759
Influence of e+e− pair creation in collision of laser and high energy photons for photon-photon colliders
760
Influence of E1-Deleted Recombinant Adenoviruses on B7.1 and IL-2 Expression in C1498 Cells
761
Influence of early colour degradation of asphalt pavements on their thermal behaviour
762
Influence of early diagenesis on the vertical distribution of metal forms in sediments of Bohai Bay, China
763
Influence of early pH decline on calpain activity in porcine muscle
764
Influence of early prehospital thrombolysis on mortality and event-free survival (The Myocardial Infarction Triage and Intervention [MITI] Randomized Trial)
765
Influence of early stages of arbuscular mycorrhiza on uptake of zinc and phosphorus by red clover from a low-phosphorus soil amended with zinc and phosphorus
766
Influence of early strike-slip deformation on subsequent perpendicular shortening: An experimental approach
767
Influence of earlywood–latewood size and isotope differences on long-term tree-ring δ13C trends
768
Influence of earth connection on the operation of railway track circuits
769
Influence of Earth rotation on continental motions
770
Influence of Earth’s shadowing effects on space debris stability Original Research Article
771
Influence of earthquake source parameters and damping on elastic response spectra for Iranian earthquakes
772
Influence of earthquakes on the stability of slopes
773
Influence of earthworm activity and rice straw application on the soil microbial community structure analyzed by PLFA pattern
774
Influence of earthworm activity on aggregate-associated carbon and nitrogen dynamics differs with agroecosystem management
775
Influence of earthworm activity on aggregate-associated carbon and nitrogen dynamics differs with agroecosystem management
776
Influence of earthworm activity on the abundance of collembola in soil
777
Influence of earthworm invasion on soil microbial biomass and activity in a northern hardwood forest
778
Influence of earthworm invasion on soil microbial biomass and activity in a northern hardwood forest
779
Influence of earthworms on soil properties and grass production in reclaimed cutover peat
780
Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/aromatic-ester) copolymers for biomedical applications
781
Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy
782
Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy Original Research Article
783
Influence of ECAP processing parameters on texture and microstructure of commercially pure aluminum
784
Influence of ECAP routes on microstructure and mechanical properties of Mg–Zn–Ca alloy
785
Influence of ECAP routes on the microstructure and properties of pure Ti
786
Influence of ECAP routes on the microstructure and properties of pure Ti
787
Influence of eccentric drawbar force on power delivery efficiency of a wheeled tractor
788
Influence of Echinacea extract pre- or postnatal supplementation on immune and oxidative status of growing rabbits
789
Influence of echocardiographic scan plane location and number on the accuracy of three-dimensional left ventricular volume and shape determination
790
Influence of ECM proteins and their analogs on cells cultured on 2-D hydrogels for cardiac muscle tissue engineering
791
Influence of Eco-Friendly Control Strategies on the Germination of Mycotoxin Secreted Fusarium Verticillioides Infested Maize
792
Influence of ecological factors on the relationship between mfo induction and fish growth: Bridging the gap using neural networks
793
Influence of Economic Constraints on the Shape of Emission Corridors
794
Influence of Economic Indicators over the Lifetime of Agricultural Machinery
795
Influence of economical variables on a supercritical biodiesel production process
796
Influence of ecophysiological factors on growth, lag phase and ochratoxin A production by Aspergillus niger aggregate strains in irradiated corn grains
797
Influence of edge and basal plane sites on the electrochemical behavior of flake-like natural graphite for Li-ion batteries
798
Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints
799
Influence of edge on predator–prey distribution and abundance
800
Influence of Edge Rolling Reduction on Plate-Edge Stress Distribution During Finish Rolling Original Research Article
801
Influence of edge sharpness on the strength of square concrete columns confined with FRP composite laminates
802
Influence of edge velocity on flame front position and displacement speed in turbulent premixed combustion
803
Influence of edible coatings on postharvest quality of fresh Chinese jujube fruits during refrigerated storage
804
Influence of EDTA and chemical species on arsenic accumulation in Spirodela polyrhiza L. (duckweed)
805
Influence of EDTA and Phosphorus Levels on Dry Matter Yield and Metals Relationships of Maize Root and Shoot in a Lead-Polluted Calcareous Soil
806
Influence of EDTA concentration on the structure and properties of SnS films prepared by electro-deposition
807
Influence of EDTA on the electrochemical behavior of phenols
808
Influence of EDTA2− on the hydrothermal synthesis of CdTe nanocrystallites
809
Influence of education and knowledge on perceptions and practices to control malaria in Southeast Nigeria
810
Influence of Education and Socio-Economic Factors on Stage of Cancer Diagnosis: A Study in Pakistani Population
811
INFLUENCE OF EDUCATION ON DEPOPULATION OF VILLAGE
812
Influence of Education on Oro-dental Knowledge among School Hygiene Instructors
813
Influence of Education on Risk of Hysterectomy before Age 45 Years
814
Influence of education on the benton visual retention test performance as mediated by a strategic search component
815
Influence of education on the pattern of cognitive deterioration in AD patients: The cognitive reserve hypothesis
816
Influence of effective mass in modulating size-dependent linear and non-linear polarization of single carrier 2-dimensional anharmonic quantum dots
817
Influence of effective stress intensity factor range on mixed mode fatigue crack propagation
818
Influence of effector molecules on the CD8+ T cell response to infection
819
Influence of effluent discharge on developing seaweed in semi-natural aquatic environments
820
Influence of Effluent Discharge on Water Quality and Level for Chalk Aquifer in Hampshire, South-East England
821
Influence of egg lipids and fatty acids on egg viability, and their utilization during embryonic development of spotted wolf-fish, Anarhichas minor Olafsen
822
Influence of egg type, pressure and mode of incorporation on density and bubble distribution of a lady finger batter Original Research Article
823
Influence of EGR and oxygen-enriched air on diesel engine NO–Smoke emission and combustion characteristic
824
Influence of EGR unequal distribution from cylinder to cylinder on NOx–PM trade-off of a HSDI automotive Diesel engine
825
Influence of Ejaculation Time on Sperm Quality Parameters in High Performance Boars
826
Influence of ejection angle on residual stress and optical properties of sputtering Ta2O5 thin films
827
Influence of ejection fraction on hospital mortality, morbidity, and costs for CABG patients
828
Influence of El Niٌo and Indian Ocean Dipole on sea level variability in the Bay of Bengal
829
Influence of elaiosome on postdispersal dynamics of an ant-dispersed plant
830
Influence of elastic gradient profiles on dynamically loaded functionally graded materials: cracks along the gradient
831
Influence of elastic modulus on stress redistribution and cracking in repair patches
832
Influence of elastic properties on superplasticity in doped yttria-stabilized zirconia Original Research Article
833
Influence of elastic strains on the adsorption process in porous materials. Thermodynamics and experiment
834
Influence of elastic variations on crack initiation in functionally graded glass-filled epoxy
835
Influence of elbow curvature on flow structure at elbow outlet under high Reynolds number condition
836
Influence of elderberry and blackcurrant concentrates on the growth of microorganisms
837
Influence of electric current density on the bactericidal effectiveness of pulsed electric field treatments Original Research Article
838
Influence of electric current on diffusionally accommodated sliding at hetero-interfaces Original Research Article
839
Influence of electric field and emission current on the configuration of nanotubes in carbon nanotube layers Original Research Article
840
Influence of electric field on laser damage properties of DLC films by unbalanced magnetron sputtering
841
Influence of electric field on photoluminescence of lanthanide-doped nematic liquid crystal
842
Influence of electric field on single gas-bubble growth and detachment in microgravity
843
INFLUENCE OF ELECTRIC FIELD PROFILE AND POLARITY ON THE MODE OF EHDA RELATED TO ELECTRIC DISCHARGE REGIMES
844
Influence of electric field type on the assembly of single walled carbon nanotubes
845
Influence of electric fields on magnetization of achiral carbon tori
846
Influence of electric fields on the fracture of ferroelectric ceramics
847
Influence of electric fields on the structure of chitosan edible coatings
848
Influence of electric potentials on the tribological behaviour of silicon carbide
849
Influence of electrical characteristics on the sensitivity of p-InP-based pseudo-Schottky diodes for NO2 monitoring in atmosphere
850
Influence of electrical conductivity on the phytoremediation of contaminated soils to Cd 2+ and Zn 2+
851
Influence of electrical contacts on charge collection profiles in CdZnTe studied by IBIC
852
Influence of electrical contacts on charge collection profiles in CdZnTe studied by IBIC
853
Influence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide
854
Influence of electrical discharge machining on the reciprocating sliding wear response of WC-Co cemented carbides
855
Influence of electrical discharge machining on tribological behavior of ZrO2–TiN composites
856
Influence of electrical discharged machining and surface defects on the fatigue strength of electrodeposited nanocrystalline Ni
857
Influence of electrical stimulation on calpain and ubiquitin-proteasome systems in the denervated and unloaded rat tibialis anterior muscles
858
Influence of electrically conductive polymers on the operating parameters of lead/acid batteries
859
Influence of electro-acupuncture on bone mineral density, bone strength and ultrastructure in ovariectomized rats
860
Influence of electro-acupuncture on pain threshold in horses and its mode of action
861
Influence of electro-beam irradiation on PTC/NTC behaviors of carbon blacks/HDPE conducting polymer composites
862
Influence of electrochemical deposition parameters on the performance of poly-3-methyl thiophene and polyaniline sensors for virgin olive oils
863
Influence of electrochemical doping on low frequency noise of conducting poly(3-methylthiophene) film
864
Influence of Electrochemical Parameters on the Etching of Macropores in Silicon
865
Influence of electro-co-deposition parameters on nano-TiO2 inclusion into nickel matrix and properties characterization of nanocomposite coatings obtained
866
Influence of electrode contacts on conductivity measurements of thin YSZ electrolyte films and the impact on solid oxide fuel cells
867
Influence of electrode layout on performance of insulated surface discharge: modelling by use of PSpice
868
Influence of electrode material on the electrocoagulation
869
Influence of electrode materials on open-circuit voltage profiles with a temperature difference for a thermocell using a Br2/Br−-redox reaction
870
Influence of electrode mismatch on Cole parameter estimation from Total Right Side Electrical Bioimpedance Spectroscopy measurements
871
Influence of electrode misplacement on the electrocardiographic signs of inferior myocardial ischemia
872
Influence of electrode on electrical conduction of ZincPhthalocyanine (ZnPc) thin films
873
Influence of electrode pretreatment, counter anions and additives on the electropolymerization of pyrrole in aqueous solutions
874
Influence of electrode structure on the performance of a direct methanol fuel cell
875
Influence of electrodeposition conditions on the microstructure and corrosion resistance of Zn–Ni alloy coatings from a deep eutectic solvent
876
Influence of Electrodeposition Method, Solvent and Nanoparticle Concentration on Polypyrrole Coatings for Corrosion Protection of Mild Steel
877
Influence of electrodeposition parameters of Ni–W on Ni cathode for alkaline water electrolyser
878
Influence of electrodeposition parameters on the characteristics of NiMoP film
879
Influence of electrodeposition parameters on the deposition rate and microhardness of nanocrystalline Ni coatings
880
Influence of electrodeposition potential on composition and ion exchange of polypyrrole films in aqueous hexafluoroaluminate featured by EQCM molar mass to charge factors
881
Influence of electrodes ageing on the properties of the gas sensors based on SnO2
882
Influence of electroformation charge capacity on the mechanism of charge/discharge process for positive electrode in lead–acid cells
883
Influence of electroless nickel plating on I–V characteristics and its implications for reliability in ZnO-based ceramic varistors
884
Influence of Electrolyte Composition and Voltage on the Microstructure and Growth Mechanism of Plasma Electrolytic Oxidation (PEO) Coatings on Tantalum: A Review
885
Influence of electrolyte composition on the electroosmotic flow and electrophoretic mobility of proteins and peptides
886
Influence of Electrolyte Concentration on Copying Accuracy of Precision-ECM
887
Influence of electrolyte concentration on microchannel oil-in-water emulsification using differently charged surfactants
888
Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy
889
Influence of electrolyte ion adsorption on the derivative of potentiometric titration curve of oxide suspension – theoretical analysis
890
Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys
891
Influence of electrolyte on the photovoltaic performance of a dye-sensitized TiO2 solar cell based on a Ru(II) terpyridyl complex photosensitizer
892
Influence of electrolyte temperature on properties and infrared emissivity of MAO ceramic coating on 6061 aluminum alloy
893
Influence of electrolytes on the heat-induced swelling of aqueous dispersions of native wheat starch granules
894
Influence of electrolytes on the photovoltaic performance of organic dye-sensitized nanocrystalline TiO2 solar cells
895
Influence of electromagnetic brake on flow field of liquid steel in the slab continuous casting mold
896
Influence of Electromagnetic Fields and Protective Effect of CAPE on Bone Mineral Density in Rats
897
Influence of Electromagnetic Fields of Two Phases Square Wave with Low Frequency on Serum Alt and Ast Levels and Histochemistry of Hepatocytesʹ Glycogen
898
Influence of Electromagnetic Fields on Lead Toxicity: A Study of Conformational Changes in Human Blood Proteins
899
Influence of Electromagnetic Generalized Thermoelasticity Interactions with Nonlocal Effects under Temperature-Dependent Properties in a Solid Cylinder
900
Influence of electron beam and ultraviolet ozone irradiation on blue-emission properties of C60-coupled porous silicon
901
Influence of electron beam halos on the FEL performance
902
Influence of electron beam halos on the FEL performance
903
Influence of electron capture after-effects on the stability of 111In(111Cd)-complexes with organic ligands Original Research Article
904
Influence of electron concentration and temperature on fullerene formation in a carbon plasma Original Research Article
905
Influence of electron cooler on dipole ion oscillations in high-current storage ring
906
Influence of electron cooler on dipole ion oscillations in high-current storage ring
907
Influence of electron diffraction on measured energy-resolved momentum densities in single-crystalline silicon Original Research Article
908
Influence of electron donor, oxygen, and redox potential on bacterial perchlorate degradation
909
Influence of electron donors on the growth and activity of sulfate-reducing bacteria
910
Influence of electron irradiation on the crystallisation, molecular weight and mechanical properties of poly-(R)-3-hydroxybutyrate
911
Influence of electron irradiation on the electronic properties of microcrystalline silicon
912
Influence of electron irradiation on the mobility and on the mechanical properties of DGEBA/TETA epoxy resins
913
Influence of electron radiation on adhesion of some polymer films to acrylic adhesives
914
Influence of electron structure on the corrosional resistance of iron-based solid solutions in aggressive media.
915
Influence of electron-beam irradiation on electric parameters of dielectric materials
916
Influence of electron-beam irradiation on thermal stabilization process of polyacrylonitrile fibers
917
Influence of electron-beam parameters on the radiation-induced formation of graphitic onions
918
Influence of electron-beam parameters on the radiation-induced formation of graphitic onions
919
Influence of electron-beam radiation on the hydrolytic degradation behaviour of poly(lactide-co-glycolide) (PLGA)
920
Influence of electronic and ionic processes on electrical properties of TlBr crystals
921
Influence of electronic and ionic processes on electrical properties of TlBr crystals
922
Influence of electronic and steric effects on stability constants and electrochemical reversibility of divalent ion complexes with glycine and sarcosine: A glass electrode potentiometric, sampled direct current polarographic, virtual potentiometric, and m
923
Influence of electronic and steric factors on 2,3-dihydroimidazo[1,2-a]pyridine-based enantioselective acylation catalysts
924
Influence of electronic antifouling on agglomeration of calcium carbonate
925
Influence of Electronic Procurement Strategy on Value For Money In Construction Project
926
Influence of electronic state of rhodium in supported bimetallic catalysts on catalytic activity and selectivity in carbon monoxide hydrogenation reactions
927
Influence of electronic stopping on amorphization energies
928
Influence of electronic stopping power on the total neutron yield of energetic heavy ions
929
Influence of electronic stopping power on the total neutron yield of energetic heavy ions
930
Influence of electron–phonon interaction on soliton mediated spin–charge conversion effects in two-component polymer model Original Research Article
931
Influence of electron-withdrawing and electron-donating substituents on photophysical properties of azaphthalocyanines
932
Influence of Electroplating Parameters on Microstructure and Amount of Ceramic Particle Deposition in Ni-Co-CeO_2 Composite Coating
933
Influence of electropolishing and anodic oxidation on morphology, chemical composition and corrosion resistance of niobium
934
Influence of electropolishing current densities on sulfur generation at niobium surface
935
Influence of electropulsing globularization on the microstructure and mechanical properties of Ti–6Al–4V alloy strip with lamellar microstructure
936
Influence of Electropulsing Pretreatment on Solid-State Graphitization of Spherical Graphite Iron Original Research Article
937
Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg–9Al–1Zn alloy strip
938
Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy
939
Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3−δ films for SOFCs
940
Influence of electrospraying parameters on the microstructure of La0.6Sr0.4Co0.2F0.8O3−δ films for SOFCs
941
Influence of electrospun collagen on wound contraction of engineered skin substitutes
942
Influence of electrospun fiber size on the separation efficiency of thin film nanofiltration composite membrane
943
Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates
944
Influence of electrostatic interactions in electrophoretic membrane contactors Original Research Article
945
Influence of electrostatic interactions on the rejection with NF and assessment of the removal efficiency during NF/GAC treatment of pharmaceutically active compounds in surface water
946
Influence of element Re on deformation mechanism within γ′ phase of single crystal nickel-based superalloys during creep at elevated temperatures
947
Influence of element Re on lattice misfits and stress rupture properties of single crystal nickel-based superalloys
948
Influence of elemental composition on crystal structure and hydrogen storage performance for Mg-containing alloys
949
Influence of Elemental Sulfur and Sulfur Oxidizing Bacteria on Some Nutrient Deficiency in Calcareous Soils
950
Influence of elemental sulfur on the de-novo-synthesis of organochlorine compounds from residual carbon on fly ash
951
Influence of elemental sulfur, micronutrients, phosphorus, calcium, magnesium and potassium on growth of Prosopis alba on high pH soils in Argentina
952
INFLUENCE OF ELEMENTS FOR CLOSING OF THE HALLS POULTRY PERFORMANCE PRODUCTIVE
953
Influence of elevated atmospheric CO2 and water availability on soil fungal communities under Eucalyptus saligna
954
Influence of elevated atmospheric CO2 and water availability on soil fungal communities under Eucalyptus saligna
955
Influence of elevated CO2, nitrogen, and Pinus elliottii genotypes on performance of the redheaded pine sawfly, Neodiprion lecontei
956
Influence of elevated concentrations of atmospheric CO2 on CH4 and CO2 entrapped in rice-paddy soil
957
Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash
958
Influence of elevated temperatures on the cyclic deformation behaviour of the magnesium die-cast alloys AZ91D and MRI 230D
959
Influence of elevated temperatures on the immune response of abalone, Haliotis rubra
960
Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete
961
Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates
962
Influence of elevation modelling on hydrodynamic simulations of a tidally-dominated estuary
963
Influence of elicitors on taxane production and 3-hydroxy-3-methylglutaryl coenzyme A reductase activity in Taxus media cells
964
Influence of Ellagic Acid and Ebselen on Sperm and Oxidative Stress Parameters during Liquid Preservation of Ram Semen
965
Influence of Ellipsoidal Dimple Column Number on Performance of Highly-loaded Compressor Cascade
966
Influence of ELMs on operation of ICRF antennas in ASDEX Upgrade
967
Influence of elongational flow on phase separated inclusions within gelling biopolymer drops
968
Influence of embedded particles on microstructure, corrosion resistance and thermal conductivity of CuO/SiO2 and NiO/SiO2 nanocomposite coatings
969
Influence of embedding parameters and noise in center of pressure recurrence quantification analysis
970
Influence of embossing and restoration on the mechanical properties of aluminum alloy sheets
971
Influence of Embryonic Cardiomyocyte Transplantation on the Progression of Heart Failure in a Rat Model of Extensive Myocardial Infarction
972
Influence of emission and transportation characteristics on chemical cloud water composition at Mt. Brocken (Germany)
973
Influence of emission input data on ozone level predictions for the upper rhine valley
974
Influence of emission-factor uncertainty and farm-characteristic variability in LCA estimates of environmental impacts of French dairy farms
975
Influence of emitter bandgap on interdigitated point contact back heterojunction (a-Si:H/c-Si) solar cell performance
976
Influence of emotional arousal on the N150 of the Auditory Evoked Potential from the rat amygdala
977
Influence of Emotional Expression on Memory Recognition Bias: A Functional Magnetic Resonance Imaging Study
978
Influence of emotional factors on the initial orientation of pigeons
979
Influence of Emotional Intelligence and Gender on Job Performance and Job Satisfaction among Nigerian Policemen
980
Influence of emulsification on the properties of styrene–butadiene–styrene chemically modified bitumens
981
Influence of emulsifier type on freeze-thaw stability of hydrogenated palm oil-in-water emulsions
982
Influence of emulsifier type on gastrointestinal fate of oil-in-water emulsions containing anionic dietary fiber (pectin)
983
Influence of emulsion composition and ultrasonication time on flaxseed oil powder properties
984
Influence of emulsion on crystal growth of hydroxyapatite
985
Influence of enamel border and regional variability on durability of resin–dentin bonds
986
Influence of enamel wetness on composite restorations using various dentine bonding agents: Part II—effects on shear bond strength
987
Influence of enamel wetness on resin composite restorations using various dentine bonding agents: Part I—effects on marginal quality and enamel microcrack formation
988
Influence of encapsulation materials on the optical properties and conversion efficiency of heat-sealed flexible polymer solar cells
989
Influence of encapsulation of emulsified lipids with chitosan on their in vivo digestibility
990
Influence of encapsulation on the mechanism of thermal decomposition of hexacyanotransition metal complexes
991
Influence of end constraints on the collapse of axially impacted frusta
992
Influence of end friction confinement on impact tests of concrete material at high strain rate
993
Influence of end-conditions during tube hydroforming of aluminum extrusions
994
Influence of end-conditions during tube hydroforming of aluminum extrusions
995
Influence of end-conditions during tube hydroforming of aluminum extrusions
996
Influence of endodontic post type (glass fiber, quartz fiber or gold) and luting material on push-out bond strength to dentin in vitro
997
Influence of endodontic posts on the fracture behavior of crowned premolars with class II cavities
998
Influence of endogenous and exogenous RNases on the variation of pollen cytosolic-free Ca2+ in Pyrus serotina Rehd
999
Influence of Endometriosis on Sexual Satisfaction and Pain Intensity: Does Pain Make a Difference?
1000
Influence of endothelial nitric oxide synthase gene polymorphisms (G894T, 4a4b, T-786C) and hyperhomocysteinemia on the predisposition to acute coronary syndromes