<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modeling of HPA and HPA linearization through a predistorter: Global Broadcasting Service applications
2
Modeling of HT and HTO release from irradiated lithium metazirconate
3
Modeling of human ghrelin receptor (hGHS-R1a) in its close state and validation by molecular docking Original Research Article
4
Modeling of Human Immunodeficiency Virus Modes of Transmission in Iran
5
Modeling of hurricane damage for Hawaii residential construction
6
Modeling of HXeBr in CO2 and Xe environments: Structure, energetics and vibrational spectra
7
Modeling of hybrid photovoltaic/wind/fuel cells power system
8
MODELING OF HYBRID RENEWABLE ENERGY SYSTEM: THE CASE STUDY OF ISTANBUL, TURKEY
9
Modeling of hybrid renewable energy systems
10
Modeling of hydrate formation conditions for CH4, C2H6, C3H8, N2, CO2 and their mixtures using the PRSV2 equation of state and obtaining the Kihara potential parameters for these components
11
Modeling of hydration kinetics in cement based materials considering the effects of curing temperature and applied pressure
12
Modeling of hydration reactions using neural networks to predict the average properties of cement paste
13
Modeling of hydrocarbon species in ECR methane plasmas
14
Modeling of hydrocarbons pyrolysis at low temperature. Automatic generation of free radicals mechanisms
15
Modeling of Hydrodynamic Chromatography for Colloid Migration in Fractured Rock
16
Modeling of hydrodynamic dispersion and two-phase flow in the complex variable boundary element method Original Research Article
17
Modeling of Hydrodynamic Factors for Management of Coastal Hazards, Case Study: Khamir Port, Persian Gulf, Iran
18
Modeling of hydrodynamics in microchannel reactor for Fischer–Tropsch synthesis
19
Modeling of hydroecological feedbacks predicts distinct classes of landscape pattern, process, and restoration potential in shallow aquatic ecosystems
20
Modeling of hydrogen embrittlement in single crystal Ni
21
Modeling of hydrogen explosion on a pressure swing adsorption facility
22
Modeling of hydrogen permeation for Ni–BZCY asymmetric membrane
23
Modeling of hydrogen permeation for Ni–ceramic proton conductor composite membrane with symmetric structure
24
Modeling of hydrogen production process from biomass using oxygen blown gasification
25
Modeling of hydrogen production with a stand-alone renewable hybrid power system
26
Modeling of hydrogen storage materials by density-functional calculations
27
Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy
28
Modeling of hydrogen trapping in the deformed Pd and Pd77Ag23 alloy
29
Modeling of hydrogen upd isotherms
30
Modeling of hydrogen vacancy for dissociative adsorption of H2 on Pd (1 1 1) surface by a quantum chemical molecular dynamics
31
Modeling of hydrogen-assisted ductile crack propagation in metals and alloys
32
Modeling of hydrogen-rich gas production by plasma reforming of hydrocarbon fuels
33
Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower
34
Modeling of Hygrothermal Damage of Composite Materials
35
Modeling of hysteresis and power losses in transformer laminations
36
Modeling of ice crystal growth in laminar falling films for the production of pumpable ice slurries
37
Modeling of ice formation and condensation on a cryogenic surface
38
Modeling of ice formation in porous solids with regard to the description of frost damage
39
Modeling of Icing and Ice Shedding on Overhead Power Lines Based on Statistical Analysis of Meteorological Data
40
Modeling of icing events based on passive ice meter observations in Quebec
41
Modeling of Immobilized Cell Columns for Bioconversion and Wastewater Treatment
42
Modeling of immunoglobulin uptake by N,N,N′,N′-ethylenediaminetetramethylenephosphonic acid-modified zirconia particles under static and dynamic conditions
43
Modeling of Impact Damage of Sewing Machine Needle on Woven Fabric by Finite Element Method
44
Modeling of impact problems using an h-adaptive, explicit Lagrangian finite element method in three dimensions Original Research Article
45
Modeling of impact toughness of cold formed material by genetic programming
46
Modeling of impacts on composite structures
47
Modeling of Inclusion Growth and Dissolution in the Weld Pool
48
Modeling of Inclusion Removal in a Tundish
49
Modeling of Inclusion Removal in a Tundish
50
Modeling of inclusions with interphases in heterogeneous material using the infinite element method
51
Modeling of incompressible flow in short pipes with leaks
52
Modeling of Incubation Time for Austenite to Ferrite Phase Transformation Original Research Article
53
Modeling of in-cylinder pressure oscillations under knocking conditions: A general approach based on the damped wave equation
54
Modeling of Individual and Organizational Factors Affecting Traumatic Occupational Injuries Based on the Structural Equation Modeling: A Case Study in Large Construction Industries
55
Modeling of Induced Polarization and Resistivity Data for Prospecting and Exploration of Polymetallic Deposit in Kaboudan Area, East of Iran
56
Modeling of induction machines including stator and rotor slot effects
57
Modeling of industrial crystallizers for control and design purposes
58
Modeling of industrial energy consumption: An introduction and context
59
Modeling of industrial reactor for hydrotreating of vacuum gas oils Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions
60
Modeling of industrial reactor for hydrotreating of vacuum gas oils: Simultaneous hydrodesulfurization, hydrodenitrogenation and hydrodearomatization reactions
61
Modeling of inelastic behavior of curved members with a mixed formulation beam element
62
Modeling of inelastic impacts with the help of smooth-functions
63
Modeling of inertial particle transport and deposition in human nasal cavities with wall roughness
64
Modeling of Inflow Well Performance of Multilateral Wells: Employing the Concept of Well Interference and the Joshiʹʹs Expression
65
Modeling of influence of heterogeneity on mechanical performance of unreinforced masonry shear walls
66
Modeling of influence of hydrological processes on the carbon cycle of a forest ecosystem
67
Modeling of influence of lithium vacancy on thermal conductivity in lithium aluminate
68
Modeling of influencing parameters in active noise control on an enclosure wall
69
Modeling of inherent SO2 capture in coal particles during combustion in fluidized bed
70
Modeling of initial crystallization in the alloys Al–10Ni and Al–5Ni–2.7Y at high undercoolings
71
MODELING OF INITIAL INTENSE CONTRACTION IN SAND-STRUCTURE INTERFACES
72
Modeling of in-ladle direct thermal control rheocasting process
73
Modeling of in-situ crystallization processes in the Permian mafic layered intrusion of Mont Collon (Dent Blanche nappe, western Alps)
74
Modeling of in-stream tidal energy development and its potential effects in Tacoma Narrows, Washington, USA
75
Modeling of insulated CFRP-strengthened reinforced concrete T-beam exposed to fire
76
Modeling of integral-type Stirling refrigerator using system dynamics approach
77
Modeling of integrated marine ecosystem including the generation-tracing type scallop growth model
78
Modeling of integrated marine ecosystem including the generation-tracing type scallop growth model
79
Modeling of interactions among sustainability components of an agro-ecosystem using local knowledge through cognitive mapping and fuzzy inference system
80
Modeling of interconnection subsystems for massively parallel computers
81
Modeling of Interdendritic Strain and Macrosegregation for Dendritic Solidification Processes: Part I. Theory and Experiments
82
Modeling of Interdendritic Strain and Macrosegregation for Dendritic Solidification Processes: Part II. Computation of Interdendritic Strain and Segregation Fields in Steel Ingots
83
Modeling of interfaces in two-dimensional problems using solid finite elements with high aspect ratio
84
Modeling of interfacial crack velocities in snow
85
Modeling of interfacial debonding crack in particle reinforced composites using Voronoi cell finite element method
86
Modeling of interfacial modification effects on thermal conductivity of carbon nanotube composites
87
Modeling of interference fits taking form defects of the surfaces in contact into account
88
Modeling of internal combustion engine based cogeneration systems for residential applications
89
Modeling of internal curing in maturing mortar
90
Modeling of internal moisture transport during durum wheat pasta drying Original Research Article
91
Modeling of internal stresses and interface effects in metals
92
Modeling of intra-crystalline hardening of materials with particles
93
Modeling of in-vehicle human exposure to ambient fine particulate matter
94
Modeling of in-vehicle magnetic refrigeration
95
Modeling of investment attractiveness of countries using entropy analysis of regional stock markets
96
Modeling of ion and water transport in the polymer electrolyte membrane of PEM fuel cells
97
Modeling of Ion Complexation and Extraction Using Substructural Molecular Fragments
98
Modeling of ion exchange expanded-bed chromatography for the purification of C-phycocyanin
99
Modeling of ion-exchanged glass waveguide structures
100
Modeling of ionic diffusivity in non-saturated cement-based materials using lattice Boltzmann method
101
Modeling of ionic relaxation around a biomembrane disk
102
Modeling of ionic transport in electric-stimulus-responsive hydrogels
103
Modeling of ionization produced by fast charged particles in gases
104
Modeling of ionization produced by fast charged particles in gases
105
Modeling of ionization–recombination processes in the atmospheric surface layer
106
Modeling of ionizing irradiation influence on Schottky-gate field-effect transistor
107
Modeling of ionizing irradiation influence on Schottky-gate field-effect transistor
108
Modeling of ionospheric parameter variations in East Asia during the moderate geomagnetic disturbances Original Research Article
109
Modeling of ionospheric scintillation at low-latitude Original Research Article
110
Modeling of ion-pairing effect in peptide reversed-phase chromatography
111
Modeling of iron diffusion in the iron oxides magnetite and hematite with variable stoichiometry Original Research Article
112
Modeling of iron K lines: Radiative and Auger decay data for
113
Modeling of iron losses of permanent-magnet synchronous motors
114
Modeling of iron ore pelletization using 3 ** (k–p) factorial design of experiments and polynomial surface regression methodology
115
Modeling of irradiation hardening of polycrystalline materials
116
Modeling of irregular structures for the construction simulation in virtual reality environments based on web
117
MODELING OF IRRIGATION AND DRAINAGE CANALS FOR CONTROLLER DESIGN
118
MODELING OF IRRIGATION AND DRAINAGE CANALS FOR CONTROLLER DESIGN
119
modeling of isentropic coefficients used in one dimensional model to predict ejector performance at critical mode
120
Modeling of isobaric stages of adsorption cooling cycle: Transient and quasi-stationary regimes
121
Modeling of isobaric–isothermal chemical vapor infiltration: effects of reactor control parameters on a densification
122
Modeling of isothermal processes in porous materials on the basis of the concept of an ensemble of pores
123
Modeling of isothermal solid-state precipitation using an analytical treatment of soft impingement Original Research Article
124
Modeling of ITER related vacuum gas pumping distribution systems
125
Modeling of IT-SOFC with indirect internal reforming operation fueled by methane: Effect of oxygen adding as autothermal reforming
126
Modeling of jet electrochemical machining using numerical and design of experiments methods
127
Modeling of Jitter Characteristics for the Second Order Bang-Bang CDR
128
Modeling of joints with clearance in flexible multibody systems
129
Modeling of karst and alluvial springs discharge in the central Alborz highlands and on the Caspian southern coasts
130
Modeling of kinetic behavior of the lead dioxide electrode in a lead–acid battery by means of electrochemical impedance spectroscopy
131
Modeling of kinetics and deactivation in the direct epoxidation of propene over gold–titania catalysts
132
Modeling of kinetics and stereoselectivity in liquid-phase α-pinene hydrogenation over Pd/C Original Research Article
133
Modeling of kinetics, equilibrium and distribution data of osmotically dehydrated carambola (Averrhoa carambola L.) in sugar solutions Original Research Article
134
Modeling of kraft recovery boilers
135
Modeling of laminar pulverized coal flames with speciated devolatilization and comparisons with experiments
136
Modeling of laminated rubber bearings using an analytical stiffness matrix
137
Modeling of land subsidence due to groundwater overexploitation using elastoplastic Mohr-Coulomb model in Arak plain, Iran
138
Modeling of land subsidence induced by groundwater withdrawal using Artificial Neural Network (A case study in central Iran)
139
Modeling of large deformation – Large sliding contact via the penalty X-FEM technique
140
Modeling of large inelastic deformations of foams with respect to the point of compaction
141
Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic ϕ-model-based grain-interaction
142
Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology
143
Modeling of laser beam welding of stainless steel sheet butt joint using neural networks
144
Modeling of laser induced plasma, spectroscopic and time of flight experiments in pulsed laser deposition
145
Modeling of laser reflectance evolution during metalorganic vapor phase epitaxy growth of GaN using SiN treatment
146
Modeling of lateness distributions depending on the sequencing method with respect to productivity effects
147
Modeling of latent hardening produced by complex loading paths in FCC alloys
148
MODELING OF LATERALLY SUPPORTED EMBEDDED STRUCTURES
149
Modeling of lattice constant and their relations with ionic radii and electronegativity of constituting ions of A2XY6 cubic crystals (A=K, Cs, Rb, Tl; X=tetravalent cation, Y=F, Cl, Br, I) Original Research Article
150
Modeling of lattice structure and dynamics of Ge doped α-quartz
151
Modeling of layered timber beams and ribbed shell frameworks
152
Modeling of leaching from cementitious materials used in underground environment
153
Modeling of lean premixed combustion in stationary gas turbines
154
Modeling of LEO orbital debris populations for ORDEM2008 Original Research Article
155
Modeling of Li diffusivity in Li2O by molecular dynamics simulation
156
Modeling of life deterioration by ion bombardment of a dispenser cathode coated with an Ir/W film
157
Modeling of lifting heavy oil assisted by enclosed thermal fluid circulation in hollow rod
158
Modeling of light depolarization by cubic and hexagonal particles in noctilucent clouds
159
Modeling of lightcurves of binary asteroids
160
Modeling of light-induced degradation of amorphous silicon solar cells
161
Modeling of Lightning Return Stroke Current With Inclusion of Distributed Channel Resistance and Inductance
162
MODELING OF LINE PARAMETERS FOR THE BROADBAND POWER LINE CARRIER CHANNEL
163
Modeling of liquid ceramic precursor droplets in a high velocity oxy-fuel flame jet Original Research Article
164
Modeling of liquid desiccant drying method for gelcast ceramic parts
165
Modeling of liquid emulsion membranes facilitated by two carriers
166
Modeling of liquid fuel combustion in fluidized bed
167
Modeling of liquid metal flow and heat transfer in delivery tube during gas atomization
168
Modeling of liquid metal flow and heat transfer in delivery tube during gas atomization
169
Modeling of Liquid-Liquid Equilibria of Aqueous Alcohol + Salt Systems Using a Modified NRTL
170
Modeling of liquid–liquid equilibrium in the quinary system of water, acetone, n-butanol, ethanol, and ionic liquid
171
Modeling of liquid–liquid equilibrium of polyethylene glycol-salt aqueous two-phase systems—the effect of partial dissociation of the salt
172
Modeling of lithium ion cells—A simple equivalent-circuit model approach
173
Modeling of lithium segregation induced delamination of a-Si thin film anode in Li-ion batteries
174
Modeling of Living Cationic Ring-Opening Polymerization of Cyclic Ethers: Active Chain End versus Activated Monomer Mechanism
175
Modeling of local buckling in tubular steel frames subjected to cyclic loading
176
Modeling of local controllers in distribution network applications
177
Modeling of local scour depth downstream hydraulic structures in trapezoidal channel using GEP and ANNs
178
Modeling of localized neutral particle sources in 3D edge plasmas
179
Modeling of location-distribution considering customers with diff erent priorities by a lexicographic approach
180
Modeling of Loneliness in Mothers with Children having Specific Learning Disorders based on Coping Strategies with the Mediating Role of Self-Efficacy
181
Modeling of long nonlinear waves on the interface in a horizontal two-layer viscous channel flow
182
Modeling of long-range transport on Taiwanʹs acid deposition under different weather conditions
183
Modeling of long-term creep behavior of structural epoxy adhesives
184
Modeling of Long-Term Water Rock Interaction in the Bohemian Cretaceous Basin
185
Modeling of losses in switched reluctance machines
186
Modeling of low-density lipoprotein (LDL) transport in the artery—effects of hypertension
187
Modeling of lower hybrid antennas using the ALOHA code and comparisons with Tore Supra experiments
188
Modeling of low-pressure subcooled boiling flow of water via the homogeneous MUSIG approach Original Research Article
189
Modeling of low-temperature specific heat data for Ge27As13S60 and As40S60 glasses by means of the phenomenologically modified soft potential model Original Research Article
190
Modeling of lubricant performance in Kurt Orbahn tests for viscosity modifiers based on star polymers
191
Modeling of luminescence-based oxygen sensors with non-uniform distribution of excitation and quenching characteristics inside active medium
192
Modeling of machine failures in a flexible manufacturing cell with two machines served by a robot
193
Modeling of machine failures in a flexible manufacturing cell with two machines served by a robot
194
Modeling of machine tools using smart interlocking software blocks
195
MODELING OF MACHINING PROCESS USING ADAPTIVE NEURO-FUZZY INFERENCE SYSTEM (ANFIS) TO PREDICT PROCESS OUTPUT VARIABLES: A REVIEW
196
Modeling of macrosegregation and microporosity formation during transient directional solidification of aluminum alloys
197
Modeling of macrosegregation in direct-chill casting of aluminum alloys: Estimating the influence of casting parameters
198
Modeling of magnetically controlled Si-based optoelectronic devices
199
Modeling of magnetic-field coupling with cable bundle harnesses
200
Modeling of magnetizing and core-loss currents in single-phase transformers with voltage harmonics for use in power flow
201
Modeling of magnetron sputtering plasmas
202
Modeling of major martian magnetic anomalies: Further evidence for polar reorientations during the Noachian
203
Modeling of Malaria Incidence in Nepal
204
Modeling of Management Processes of Construction Company Business for Increase in its Competitive Stability
205
Modeling of Manufacturing of Field-Effect Heterotransistors without P-n-junctions to Optimize Decreasing their Dimensions
206
Modeling of manufacturing processes by learning systems: The naïve Bayesian classifier versus artificial neural networks
207
Modeling of manufacturing processes using a Petri-net representation
208
Modeling of manufacturing systems and robot motions
209
Modeling of marginal burning state of fire spread in live chaparral shrub fuel bed
210
Modeling of marine circulation and hypothetical discharges in Callao Bay, Peru
211
Modeling of marine litter drift and beaching in the Japan Sea
212
Modeling of Martian seasonal caps from HEND/ODYSSEY data Original Research Article
213
Modeling of masonry failure surface under biaxial compressive stress using Neural Networks
214
Modeling of masonry of infilled frames, Part I: The plastic concentrator
215
Modeling of masonry of infilled frames, Part II: Cracking and damage
216
Modeling of mass and charge transfer in an inverted rotating disk electrode (IRDE) reactor
217
Modeling of mass and energy transfers in a high temperature membrane electrolyser
218
Modeling of mass transfer and initiation of hygroscopically induced cracks in rice grains in a thermally controlled soaking condition: With dependency of diffusion coefficient to moisture content and temperature – A 3D finite element approach Original Res
219
Modeling of mass transfer sintered clay membranes for application to treat water Original Research Article
220
Modeling of mass transport of aqueous solutions of multi-solute organics through reverse osmosis membranes in case of solute–membrane affinity: Part 1. Model development and simulation
221
Modeling of Material Creep Damage Process with a Superimposed High-Frequency Cyclic Component
222
Modeling of Material Deformation Kinetics in the Prefracture Zone
223
Modeling of material failure in foam-based components
224
Modeling of material removal rate and surface roughness in finishing of bevel gears by electrochemical honing process
225
Modeling of material removal rate in rotary ultrasonic machining: designed experiments
226
Modeling of materials behavior at various temperatures of hot isostatically pressed superalloys
227
Modeling of materials mixing behavior among beryllium, carbon and tungsten as plasma-facing materials under deuterium and tritium plasma bombardment
228
Modeling of Maximum Solar Power Tracking by Genetic Algorithm Method
229
Modeling of Maximum Solar Power Tracking by Genetic Algorithm Method
230
Modeling of measured target pressure profiles in three hypervelocity impact experiments
231
Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm
232
Modeling of mechanical behavior and design criteria for SiCf/SiC composite structures in fusion reactors
233
Modeling of mechanical behavior of ultra fine grained aluminum produced by multiple compressions in a channel die
234
Modeling of mechanical bond–slip for steel-reinforced concrete under thermal loads
235
Modeling of mechanical damage detection in CFRPs via electrical resistance
236
Modeling of mechanical properties and durability of recycled aggregate concretes
237
Modeling of mechanical properties of alloy CMSX-4
238
Modeling of mechanical property degradation by short-term aging at high temperatures
239
Modeling of mechanical stimulation of hair cells in otolithic organs Original Research Article
240
Modeling of Mechanical Systems Using Rigid Bodies and Transmission Line Joints
241
Modeling of Mechanical Systems Using Rigid Bodies and Transmission Line Joints
242
Modeling of mechanical twinning in a high manganese content austenitic steel
243
Modeling of mechanical twinning in a high manganese content austenitic steel
244
Modeling of mechanical twinning in a high manganese content austenitic steel
245
Modeling of medium-Sized magnitudes of earthquakes
246
Modeling of melt conveying and heat transfer in a twin-screw cheese stretcher Original Research Article
247
Modeling of melt conveying in a deep-channel single-screw cheese stretcher Original Research Article
248
Modeling of melt electrospinning for semi-crystalline polymers
249
Modeling of membrane action in floor slabs subjected to fire
250
Modeling of membrane fouling and flux decline in reverse osmosis during separation of oil in water emulsions Original Research Article
251
Modeling of mercury desorption from activated carbon at elevated temperatures under fluidized/fixed bed operations
252
Modeling of mercury emission, transport and deposition in North America
253
Modeling of mercury sorption by activated carbon in a confined, a semi-fluidized, and a fluidized bed
254
Modeling of mesoscale coupled ocean–atmosphere interaction and its feedback to ocean in the western Arabian Sea
255
Modeling of metal binding in tropical Fluvisols and Acrisols treated with biosolids and wastewater Original Research Article
256
Modeling of metal forming processes: implementation of an iterative solver in the flow formulation
257
Modeling of metalo-static pressure on the metal–mould interface thermal resistance in the casting process
258
Modeling of methane bubbles released from large sea-floor area: Condition required for methane emission to the atmosphere
259
Modeling of methane fed solid oxide fuel cells: Comparison between proton conducting electrolyte and oxygen ion conducting electrolyte
260
Modeling of Methane Hydrate Decomposition by Using Chemical Affinity
261
Modeling of methane permeation through a defective region in MFI-type zeolite membranes Original Research Article
262
Modeling of methanol to olefins (MTO) process in a circulating fluidized bed reactor
263
Modeling of microburst outflows using impinging jet and cooling source approaches and their comparison
264
Modeling of micro-crack growth during thermal shock based on microstructural images of thermal barrier coatings
265
Modeling of microemulsion phase diagrams from excess Gibbs energy models
266
Modeling of microreactor for methane dry reforming: Comparison of Langmuir–Hinshelwood kinetic and microkinetic models
267
Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation
268
Modeling of microstructure and constitutive relation during superplastic deformation by fuzzy-neural network
269
Modeling of microstructure and mechanical behavior of ultra fine grained aluminum produced by accumulative roll-bonding
270
Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing
271
Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing
272
Modeling of microstructure evolution and mechanical property change of reduced-activation martensitic steel during varying-temperature irradiation
273
Modeling of Microstructure Evolution in 22MnB5 Steel during Hot Stamping Original Research Article
274
Modeling of microstructure evolution in austenitic stainless steels irradiated under light water reactor condition
275
Modeling of microstructure refinement in Ti–6Al–4V alloy by hydrogen treatment
276
Modeling of microwave heating of andesite and minerals
277
Modeling of microwave-convective drying of pistachios
278
Modeling of mid-infrared dust emission from P\Swift-Tuttle
279
Modeling of minibands and electronic transport in one-dimensional stacks of InAs/GaAs quantum dots
280
Modeling of minimum uncut chip thickness in micro machining of aluminum
281
Modeling of mixed-mode chromatography of peptides
282
Modeling of mixed-mode crack growth in ductile thin sheets under combined in-plane and out-of-plane loading
283
Modeling of Mixing in 96-Well Microplates Observed with Fluorescence Indicators
284
Modeling of Mixing Time for Bioreactors with Self-Inducing Impellers
285
Modeling of mobility in organic thin-film transistor based octithiophene (8T)
286
Modeling of mode control and noise in self-pulsating PhaseCOMB lasers
287
Modeling of mode-I fatigue crack growth in quasibrittle structures under cyclic compression
288
Modeling of modified atmosphere packaging based on designs with a membrane and perforations
289
Modeling of moisture diffusion in the presence of bi-axial damage in polymer matrix composite laminates
290
Modeling of moisture migration in an FRP reinforced masonry structure
291
Modeling of moisture profiles in paddy rice during drying mapped with magnetic resonance imaging
292
Modeling of moisture, color and texture changes in sesame seeds during the conventional roasting Original Research Article
293
Modeling of Moisture-Dependent Properties and Mineral Contents of Dry Mushroom
294
Modeling of molar volume of the sigma phase involving transition elements
295
Modeling of mold filling of Al gravity casting and validation with X-ray in-situ observation
296
Modeling of molecular gas adsorption isotherms on porous materials with hybrid PC-SAFT–DFT
297
Modeling of molecular weight distribution of propylene slurry phase polymerization on supported metallocene catalysts
298
Modeling of Molten Metal Flow in a Continuous Casting Process Considering the Effects of Argon Gas Injection and Static Magnetic-Field Application
299
Modeling of Monolith Reactor Washcoated with CuZSM5 Catalyst for Removing NO from Diesel Engine by Urea
300
Modeling of Monolith-Supported Affinity Chromatography
301
Modeling of morphological evolution of columnar dendritic grains in the molten pool of gas tungsten arc welding
302
Modeling of morphology evolution in the injection molding process of thermoplastic polymers
303
Modeling of Mortgage-Backed Securities based on stochastic processes
304
Modeling of Moving Boundaries in Large Plasticity Deformations via an Enriched Arbitrary Lagrangian-Eulerian FE Method
305
Modeling of mud filtrate invasion and damage zone formation
306
Modeling of multicomponent glasses: a review
307
Modeling of multicomponent homogeneous nucleation using continuous thermodynamics
308
Modeling of multicomponent mass transfer across polymer films using a thermodynamically consistent formulation of the Maxwell–Stefan equations in terms of volume fractions
309
modeling of multicomponent multiphase mixture flows on the basis of the density-functional method
310
Modeling of multicomponent systems: Role of Mo and Si on the interaction of Al and γ-UMo
311
Modeling of multicomponent vapor–liquid equilibria for polymer–solvent systems
312
Modeling of multidimensional freezing problem during cryosurgery by the dual reciprocity boundary element method
313
Modeling of multi-dimensional impurity transport in a realistic tokamak geometry
314
Modeling of multi-electrolyte transport in charged ceramic and organic nanofilters using the computer simulation program NanoFlux Original Research Article
315
Modeling of Multi-Level Capacitated Lot-Size Scheduling Problem
316
Modeling of multiphase liquid equilibria for multicomponent mixtures
317
Modeling of multi-phase moisture transfer and induced stress in drying clay bricks
318
Modeling of multiple cracking and decohesion of a thin film on a polymer substrate
319
Modeling of multiple-quantum-well solar cells including capture, escape, and recombination of photoexcited carriers in quantum wells
320
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions
321
Modeling of multistage electrochemical shaping
322
Modeling of multi-strata forest fire severity using Landsat TM Data
323
Modeling of musculoskeletal structure and function using a modular bond graph approach
324
Modeling of Nanofiltration for Concentrated Electrolyte Solutions using Linearized Transport Pore Model
325
Modeling of Nanofiltration of Low Concentration Pb(II) Aqueous Solutions Using a Coupled Concentration Polarization and Pore Flow Model
326
Modeling of nanoindentation of bulk and thin film by finite element method
327
Modeling of nano-particle precipitation process in a membrane dispersion micro-structured reactor
328
Modeling of nanoparticles’ aggregation and sedimentation in nanofluid
329
Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus
330
Modeling of nanoscale transport phenomena: Application to information technology
331
Modeling of nanostructural design of ultrafine mullite powder particles obtained by ultrasonic spray pyrolysis
332
Modeling of nanostructured TiO2 spheres obtained by ultrasonic spray pyrolysis
333
Modeling of natural convection with Smoothed Particle Hydrodynamics: Non-Boussinesq formulation
334
Modeling of natural turbulent flow in a passively heated zone
335
Modeling of Navier–Stokes equations for high Knudsen number gas flows
336
Modeling of network degradation in mixed step-chain growth polymerizations
337
Modeling of neutron irradiation response for B2-type ordered alloys
338
MODELING OF NEW PROCESS IN MIDREX SYNGAS SYSTEM
339
Modeling of next generation network deployment in developing countries
340
Modeling of NH3–NO–SCR reaction over CuO/γ-Al2O3 catalyst in a bubbling fluidized bed reactor using artificial intelligence techniques
341
Modeling of Ni–Cr–Mo based alloys: Part II — Kinetics
342
Modeling of Ni–Cr–Mo based alloys: Part II — Kinetics
343
Modeling of Ni–Cr–Mo based alloys: Part I—phase stability
344
Modeling of Ni–Cr–Mo based alloys: Part I—phase stability
345
Modeling of niobium precipitates effect on the Ni47Ti44Nb9 Shape Memory Alloy behavior
346
Modeling of Nitrate Adsorption and Reduction in Fe0-Packed Columns through Impulse Loading Tests
347
Modeling of nitrate and bromate in a seawater aquarium
348
Modeling of nitrate removal for ion exchange resin in batch and fixed bed experiments Original Research Article
349
Modeling of nitric oxide formation in high-pressure premixed laminar ethane flames
350
Modeling of Nitric Oxide Formation in Single Cylinder Direct Injection Diesel Engine Using Diesel-Water Emulsion
351
Modeling of nitric oxide formation in spark ignition engines with a multizone burned gas
352
Modeling of nitrogen oxides formation and destruction in combustion systems
353
Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding
354
Modeling of nitro-polycyclic aromatic hydrocarbon formation and decay in the atmosphere
355
Modeling of NO formation in premixed, high-pressure methane flames
356
Modeling of NO oxidation and NOx storage on Pt/BaO/Al2O3 NOx traps
357
Modeling of non-adiabatic capillary tube flows: A simplified approach and comprehensive experimental validation
358
Modeling of non-catalytic partial oxidation of natural gas under conditions found in industrial reformers
359
Modeling of nondispersive extraction of binary Zn(II) and Cu(II) with D2EHPA in hollow fiber devices
360
Modeling of non-equilibrium argon–oxygen induction plasmas under atmospheric pressure
361
Modeling of noninvasive microwave characterization of breast tumors
362
Modeling of non-isothermal annealing: Interaction of recrystallization, recovery, and precipitation Original Research Article
363
Modeling of non-isothermal crystallization kinetics of isotactic polypropylene
364
Modeling of nonlinear complex stiffness of dual-chamber pneumatic spring for precision vibration isolations
365
Modeling of nonlinear optic and ESR response of CDW MX Materials
366
Modeling of nonlinear optical properties of two-dimensional molecular aggregates
367
Modeling of nonlinear passage of acoustic waves caused by underground fracturing through the lithosphere
368
Modeling of non-linear phenomena during deformation of interparticle necks by diffusion-controlled creep Original Research Article
369
Modeling of non-linear systems by FWNNs and their intelligent control
370
Modeling of Nonlinear Systems with Friction Structure Using Multivariable Taylor Series Expansion
371
Modeling of nonlinear viscoelasticity at large deformations
372
Modeling of Non-Point Source Pollution by Long-Term Hydrologic Impact Assessment (L-THIA) (Case Study: Zayandehrood Watershed) in 2015
373
modeling of non-point source pollution by long-term hydrologic impact assessment (l-thia) (case study: zayandehrood watershed) in 2015
374
Modeling of Non-Point Source Pollution by Long-Term Hydrologic Impact Assessment (L-THIA) (Case Study: Zayandehrood Watershed) in 2015
375
Modeling of nonreacting and reacting turbulent spray jets using a fully stochastic separated flow approach
376
Modeling of non-reactive solute transport in fractured clayey till during variable flow rate and time
377
Modeling of non-stationary autoregressive alpha-stable processes by particle filters
378
Modeling of nonstationary time-series data. Part I. Data with regular periodic trends
379
Modeling of nonstationary time-series data. Part II. Dynamic periodic trends
380
Modeling of nonsymmetrical damage in plate-like structures
381
Modeling of normal and erosive burning rate of a hot double-base homogeneous propellant
382
Modeling of normalized coprime factors with ν-metric uncertainty
383
Modeling of Novel Microfluidic based Flow Sensor Inspired from Fish Canal Neuromast for Underwater Sensing
384
Modeling of NOx conversion during combustion under high CO2 concentration using detailed chemical kinetics
385
Modeling of NOx emissions from a W-shaped boiler furnace under different operating conditions
386
Modeling of NOx Emissions from the Laboratory Regeneration of Spent Fluid Catalytic Cracking Catalyst
387
Modeling of NOx formation in diesel engines using finite-rate chemical kinetics
388
Modeling of nucleate boiling heat transfer under an impinging free jet
389
Modeling of nucleic acid adsorption on 3D prisms in microchannels Original Research Article
390
Modeling of nuclide releases from perforated radioactive paraffin waste containers
391
Modeling of Occupational Risk Factors in the Development of Musculoskeletal Disorders in Nurses
392
Modeling of ohmic heating patterns of multiphase food products using computational fluid dynamics codes Original Research Article
393
Modeling of oil production by gravity drainage
394
Modeling of Oil Spill and Response in Support of Decreasing Environmental Oil Effects Case Study: Blowout from Khark Subsea Pipelines (Persian Gulf)
395
Modeling of oil–water flow using energy minimization concept
396
Modeling of oleaginous fungal biofilm developed on semi-solid media
397
Modeling of Olefin Gas-Phase Polymerization in a Multizone Circulating Reactor
398
Modeling of one-dimensional spatial effects on the spread of gypsy moths
399
Modeling of one-dimensional spatial effects on the spread of gypsy moths
400
Modeling of opposition effects with ensembles of clusters: Interplay of various scattering mechanisms
401
Modeling of optical absorption of silver prolate nanoparticles embedded in sol–gel glasses
402
Modeling of optical and energy performance of tungsten-oxide-based electrochromic windows including their intermediate states
403
Modeling of optical pumping experiments in CO. I. Time-resolved experiments Original Research Article
404
Modeling of optical pumping experiments in CO: II. Steady conditions Original Research Article
405
MODELING OF OPTICAL TRAPPING USING DOUBLE NEGATIVE INDEX FISHNET METAMATERIALS
406
Modeling of optimal investment in science and technology
407
Modeling of Orange Mass Based on Dimensions
408
Modeling of organic matter removal and nitrification in sewer systems — an approach to wastewater treatment Original Research Article
409
Modeling of orthokinetic flocculation of Saccharomyces cerevisiae Original Research Article
410
Modeling of osmotic kinetics in aqueous solutions, based on experimental data
411
Modeling of outgassing or pumping functions of the constituent elements such as chamber walls and high-vacuum pumps
412
Modeling of Outpatient Prescribing Process in Iran: A Gateway Toward Electronic Prescribing System
413
Modeling of Overdue Receivables in the City Bank Using Factor-based Simulation (Northwestern Provinces of the Country)
414
Modeling of Overflow Metabolism in Batch and Fed-Batch Cultures of Escherichia coli
415
Modeling of overloaded gradient elution of nociceptin/orphanin FQ in reversed-phase liquid chromatography
416
Modeling of oxidation and its effect on crack growth in titanium alloys Original Research Article
417
Modeling of oxidation behavior of SiC-reinforced ceramic matrix composites
418
Modeling of oxidation behavior of SiC-reinforced ceramic matrix composites
419
Modeling of oxidation of structural materials in LBE systems
420
Modeling of Oxidative Coupling of Methane over Mn/Na2WO4/SiO2 Catalyst Using Artificial Neural Network
421
Modeling of oxy-fuel combustion for a western Canadian sub-bituminous coal☆
422
Modeling of oxygen evolution at Teflon-bonded Ti/Co3O4 electrodes
423
Modeling of oxygen gas diffusion and consumption during the oxic transient in a disposal cell of radioactive waste
424
Modeling of oxygen mass transfer in the presence of oxygen-vectors using neural networks developed by differential evolution algorithm
425
Modeling of oxygen mass transfer in the presence of oxygen-vectors using neural networks developed by differential evolution algorithm
426
Modeling of oxygen scavenging for improved barrier behavior: Blend films
427
Modeling of Oxygen Transfer Correlations for Stirred Tank Bioreactor Agitated with Atypical Helical Ribbon Impeller
428
Modeling of ozone formation at a rural site in Southern Ontario
429
Modeling of ozone reactions on aircraft-related soot in the upper troposphere and lower stratosphere
430
Modeling of PAHs adsozrption on Thai Clay Minerals under Seawater Solution Conditions
431
Modeling of Pain Using Artificial Neural Networks
432
Modeling of paint flow rate flux for circular paint sprays by using experimental paint thickness distribution
433
Modeling of palatable food intake in female young adults. Effects of perceived body size
434
Modeling of palatable food intake. The influence of quality of social interaction
435
Modeling of Pantograph-Catenary dynamic stability
436
Modeling of parallel-plate regenerators with non-uniform plate distributions
437
Modeling of parasitic capacitances in deep submicrometer conventional and high-K dielectric MOS transistors
438
Modeling of parasitic plasma under the divertor roof baffle
439
Modeling of particle breakage in a smooth double roll crusher
440
Modeling of particle fluid interactions in a flowing film concentrator
441
Modeling of particle formation by spray drying process
442
Modeling of particle formation by spray pyrolysis using droplet internal circulation
443
Modeling of particle formation processes using gas saturated solution atomization
444
Modeling of particle fracture by repeated impacts using continuum damage mechanics
445
Modeling of particle generation in laser ablation plasma
446
Modeling of particle growth: Application to water treatment in a fluidized bed reactor
447
Modeling of particle removal processes in brush scrubber cleaning
448
Modeling of particulate carbon and species formation in coflowing diffusion flames of ethylene
449
Modeling of particulate production in the SIRENS plasma disruption simulator
450
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
451
Modeling of pattern regulation in melanophores
452
Modeling of patterned mixed-conducting electrodes and the importance of sheet resistance at small feature sizes
453
Modeling of PCCI combustion with FGM tabulated chemistry
454
Modeling of P-dynamics and algal growth in a stratified reservoir—mechanisms of P-cycle in water and interaction between overlying water and sediment
455
Modeling of P-dynamics and algal growth in a stratified reservoir—mechanisms of P-cycle in water and interaction between overlying water and sediment
456
Modeling of pedestrian evacuation based on the particle swarm optimization algorithm
457
Modeling of pedestrian evacuation under fire emergency based on an extended heterogeneous lattice gas model
458
Modeling of PEM fuel cell Pt/C catalyst degradation
459
Modeling of peptide–silica interaction based on four-body corrected fragment molecular orbital (FMO4) calculations
460
MODELING OF PERCEPTION OF TEXTILE CONSUMERS’ SATISFACTION
461
Modeling of perforated plates and screens using rigid frame porous models
462
Modeling of perforation of plates and multi-layered metallic targets
463
Modeling of performance characteristics of OLED
464
Modeling of period overlapping setup times
465
Modeling of peritectic coupled growth in Cu–Sn alloys Original Research Article
466
Modeling of permeability and compaction characteristics of soils using evolutionary polynomial regression
467
Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures
468
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic fuel storage
469
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic tanks in the presence of delaminations and stitch cracks
470
Modeling of Personalized E-Learning Environment Based on Intelligent Agents
471
Modeling of pH neutralization process using fuzzy recurrent neural network and DNA based NSGA-II
472
Modeling of phase change material peak load shifting
473
Modeling of phase change materials for applications in whole building simulation
474
Modeling of phase equilibria for the evaporative precipitation of methacrylic acid and acetic acid from aqueous solutions
475
Modeling of phase equilibria with CPA using the homomorph approach
476
Modeling of phase equilibrium of binary mixtures composed by polystyrene and chlorofluorocarbons, hydrochlorofluorocarbons, hydrofluorocarbons and supercritical fluids using cubic and non-cubic equations of state
477
Modeling of phase interfaces during pre-critical crack growth in concrete
478
Modeling of phase inversion phenomenon in two-phase pipe flows
479
Modeling of phase stability of the fcc phases in the Ni–Ir–Al system using the cluster/site approximation method coupling with first-principles calculations Original Research Article
480
Modeling of phenomena occurring in plasma jet during suspension spraying of hydroxyapatite coatings
481
Modeling of phenomenological mechanisms during thermal formation and degradation of an epoxy-based nanocomposite
482
Modeling of Phosphate Removal by Mg-Al Layered Double Hydroxide Functionalized Biochar and Hydrochar from Aqueous Solutions
483
Modeling of phosphorus dynamics in aquatic sediments: II—examination of model performance
484
Modeling of phosphorus dynamics in aquatic sediments: I—model development
485
Modeling of photochemical air pollution in the Barcelona area with highly disaggregated anthropogenic and biogenic emissions
486
Modeling of photodecoloration of azo dye in a cocktail photolysis system
487
Modeling of photodegradation kinetics of aromatic pollutants in water matrix
488
Modeling of photoluminescence spectra and quasi-Fermi level splitting in μc-Si:H solar cells
489
Modeling of Photonics Alcohol Detector System Considering Syari’ah Compliance Beverages
490
Modeling of physical and chemical equilibrium for the direct synthesis of dimethyl carbonate at high pressure conditions
491
Modeling of physical properties of composite materials
492
Modeling of piezoelectric actuator for compensation and controller design
493
Modeling of planar nonshallow prestressed beams towards asymptotic solutions
494
Modeling of Planck-high frequency instrument bolometers using non-linear effects in the thermometers
495
Modeling of Planck-high frequency instrument bolometers using non-linear effects in the thermometers
496
Modeling of plane strain ductile rupture
497
Modeling of plankton community dynamics characterized by algal toxicity and allelopathy: A focus on historical Prymnesium parvum blooms in a Texas reservoir
498
Modeling of plankton community dynamics characterized by algal toxicity and allelopathy: A focus on historical Prymnesium parvum blooms in a Texas reservoir
499
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
500
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
501
Modeling of plasma assisted formation of precipitates in zirconium containing liquid precursor droplets
502
Modeling of plasma/lithium-surface interactions in NSTX: Status and key issues
503
Modeling of plasma-controlled surface evaporation and condensation of Al target under pulsed laser irradiation in the nanosecond regime
504
Modeling of plastic localization in aluminum and Al–Cu alloys under shock loading
505
Modeling of plate heat exchangers with generalized configurations
506
Modeling of plume dynamics with shielding in laser ablation of carbon
507
Modeling of PM10 Particulate Matter in Ahvaz City Using Remote Sensing and Meteorological Parameters
508
Modeling of Polar Systems with the Perturbed-Chain SAFT Equation of State. Investigation of the Performance of Two Polar Terms
509
Modeling of polarization curves not exhibiting a Tafel region using Excel spreadsheets
510
Modeling of polarized infrared contrast of water surface polluted by crude oil
511
Modeling of poly(isoprene) melts on different scales
512
Modeling of polychlorinated biphenyls (PCBs) in the Baltimore Harbor
513
Modeling of polychlorinated biphenyls (PCBs) in the Baltimore Harbor
514
Modeling of polychromatic attenuation using computed tomography reconstructed images
515
Modeling of polychromatic attenuation using computed tomography reconstructed images
516
Modeling of polycrystals using a gradient crystal plasticity theory that includes dissipative micro-stresses
517
Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates
518
Modeling of polyurethane synthesis by reactive extrusion
519
Modeling of Pool Fire Risk in a Chemicals Warehouse
520
Modeling of pore blocking and cake layer formation in membrane filtration for wastewater treatment Original Research Article
521
Modeling of pore wall amorphous structures: influence of wall heterogeneity on the mechanism of adsorption: Krypton and Argon adsorption in MCM-41 pore model
522
Modeling of porosity during spray forming
523
Modeling of porosity during spray forming
524
Modeling of porosity formation in direct chill cast aluminum–magnesium alloys
525
Modeling of porosity formation in direct chill cast aluminum–magnesium alloys
526
Modeling of post-surgical brain and skull defects in the EEG inverse problem with the boundary element method
527
Modeling of powder metallurgy processes
528
Modeling of power electronic loads in AC distribution systems using the generalized State-space averaging method
529
Modeling of power generation from the mixing of simulated saline and freshwater with a reverse electrodialysis system: The effect of monovalent and multivalent ions
530
Modeling of Power Supply Noise in Large Chips Using the Circuit-Based Finite-Difference Time-Domain Method
531
Modeling of Power System Communications—Recognition of Technology Maturity Levels and Case Study of a Migration Scenario
532
Modeling of precipitate formation in precursor droplets injected axially into an oxygen/acetylene combustion flame
533
Modeling of precipitated Xe atoms in aluminum and the fresnel effect in hrtem imaging
534
Modeling of precipitation hardening for the naturally aged Al-Mg-Si-Cu alloy AA6111 Original Research Article
535
Modeling of precipitation hardening in Mg-based alloys
536
Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys
537
Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys Original Research Article
538
Modeling of precipitation of ultra-fine particles by pressure reduction over CO2-expanded liquids
539
Modeling of premixed turbulent flames with second moment methods
540
Modeling of Preparation of Chitosan/Tripolyphosphate Nanoparticles Using Machine-Learning Techniques
541
Modeling of preparative chromatography processes with slow intraparticle mass transport kinetics
542
Modeling of Preparative Reversed-Phase HPLC of Insulin
543
Modeling of Pre-service Pre-School Teachers’ Learning Styles based on Mathematical Algorithm
544
Modeling of pressure and shear-driven flows in open rectangular microchannels
545
Modeling of Pressure Dependence of Interfacial Tension Behaviors of Supercritical CO2 + Crude Oil Systems Using a Basic Parachor Expression
546
Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method
547
Modeling of Prestressed Concrete-Filled Circular Composite Tubes Subjected to Bending and Axial Loads
548
Modeling of primary defect aggregation in tracks of swift heavy ions in alkali halides
549
Modeling of process geometry in peripheral milling of curved surfaces
550
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
551
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
552
Modeling of processes of charge division and collection in GaAs detectors taking into account trapping effects
553
Modeling of processes of charge separation in a GaAs detector
554
Modeling of processes of charge separation in a GaAs detector
555
Modeling of Production Strategies from Common Offshore Gas Field with Game Theory Approach
556
Modeling of programming time of nanocrystal flash memory cells
557
Modeling of progressive damage in aligned and randomly oriented discontinuous fiber polymer matrix composites
558
Modeling of progressive delamination in a thin film driven by diffusion-induced stresses
559
Modeling of propane separation from light hydrocarbons by adsorption on 4A molecular sieve zeolite
560
Modeling of proteolysis and lipolysis in Iranian white brine cheese
561
Modeling of proton-induced CCD degradation in the Chandra X-ray Observatory
562
Modeling of PSA separation process including friction pressure drop in adsorbent bed
563
Modeling of pseudoelasticity via reversible slip in Fe3Ga
564
Modeling of pseudo-rational exemption to vaccination for SEIR diseases
565
Modeling of pullulan fermentation by using a color variant strain of Aureobasidium pullulans Original Research Article
566
Modeling of pulp quality parameters from distribution curves extracted from process acoustic measurements on a thermo mechanical pulp (TMP) process
567
MODELING OF PULSATILE BLOOD FLOW IN AN AXISYMMETRIC TUBE WITH A MOVING INDENTATION
568
Modeling of pulsed corona discharge process for the removal of nitric oxide and sulfur dioxide
569
Modeling of Purchase and Sales Contracts in Supply Chain Optimization
570
Modeling of pure compounds surface tension using QSPR
571
Modeling of PV Array and Performance Enhancement by MPPT Algorithm
572
Modeling of pyroclastic flows of Colima Volcano, Mexico: implications for hazard assessment
573
Modeling of Quantization Effects in Digitally Controlled DC–DC Converters
574
Modeling of quantum ballistic transport in double-gate devices with ultra-thin oxides
575
Modeling of quantum effects for ultrathin oxide MOS structures with an effective potential
576
Modeling of quantum effects for ultrathin oxide MOS structures with an effective potential
577
Modeling of quasi-steady sodium droplet combustion in convective environment
578
Modeling of radiation hardening in ferritic/martensitic steel using multi-scale approach
579
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures
580
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures
581
Modeling of radiation heat transport in complex ladder-like structures placed in rectangular enclosures Original Research Article
582
Modeling of radiation-induced segregation at grain boundaries in Fe–Cr–Ni alloys
583
Modeling of Radiative Heat Transfer During a PWR Severe Accident
584
Modeling of radionuclide and heavy metal sorption around low- and high-pH waste disposal sites at Oak Ridge, Tennessee Original Research Article
585
Modeling of radionuclides in natural fluids: synthesis and characterization of the Na4(UO2)2(OH)4(C2O4)2 complex
586
Modeling of Rainfall Factor in Soil Erosion Risk in Albania
587
Modeling of Rainfall-Runoff Correlations Using Artificial Neural Network-A Case Study of Dharoi Watershed of a Sabarmati River Basin, India
588
Modeling of Raman spectra of H:LiNbO3
589
Modeling of Rapid Solidification Process in the Gas Atomization of Molten Metals
590
Modeling of rapidly solidified aging process of Cu–Cr–Sn–Zn alloy by an artificial neural network
591
Modeling of rate-dependent phase transition in bacterial flagellar filament
592
Modeling of rates of moisture ingress into photovoltaic modules
593
Modeling of Rayleigh wave dispersion in Iberia
594
Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data
595
Modeling of RDX/GAP/BTTN pseudo-propellant combustion
596
Modeling of reaction kinetics for transesterification of palm-based methyl esters with trimethylolpropane
597
Modeling of reactive kinetics in the metal surface contaminant cleaning using atmospheric pressure plasma arc
598
Modeling of reactive synthesis in consolidated blends of fine Ni and Al powders
599
Modeling of reactive synthesis in consolidated blends of fine Ni and Al powders
600
Modeling of Real Estate Income Tax: System Dynamics Approach
601
Modeling of real-time reliability prediction system for anisotropic conductive film (ACF) processing
602
Modeling of reaustenitization of hypoeutectoid steels with cellular automaton method
603
Modeling of recent volcanic episodes at Phlegrean Fields (Italy): geochemical variations and ground deformation
604
Modeling of reciprocating internal combustion engines for power generation and heat recovery
605
Modeling of recrystallization and austenite grain size for AISI 316 stainless steel and its application to hot bar rolling
606
Modeling of recrystallization in cold rolled copper using inverse cellular automata and genetic algorithms
607
Modeling of recrystallization textures:: interaction of nucleation and growth Original Research Article
608
Modeling of Rectangular Waveguide Junctions Containing Cylindrical Posts
609
Modeling of Refractive Indices for Binary Aqueous Solutions of Some Alkane Polyols at Constant Temperature and Pressure
610
Modeling of reinforced concrete by the non-local microplane model Original Research Article
611
Modeling of reinforced masonry elements
612
Modeling of reinforcement global buckling in RC elements
613
Modeling of relationship between water permeability and microstructure parameters of ceramic membranes Original Research Article
614
Modeling of Relationships between Learning Approaches and Quality of Using Learning Strategies
615
Modeling of relative collision safety including driver characteristics
616
Modeling of relative intensity noise and terminal electrical noise of semiconductor lasers using artificial neural network
617
Modeling of relaxation oscillations in CO oxidation on metallic catalysts with consideration of reconstructive heterogeneity of the surface
618
Modeling of Removal of Chromium (VI) from Aqueous Solutions Using Artificial Neural Network
619
Modeling of removal of sulfur dioxide from flue gases in a horizontal cocurrent gas–liquid scrubber
620
Modeling of renewable energy resources for generation reliability evaluation
621
Modeling of residence time distribution in regrinding Vertimill
622
Modeling of residential structure fire response: Exploring the hyper-project
623
Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading
624
Modeling of residual stress distribution in D2 steel via grinding dynamics using a second-order damping system
625
Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy
626
Modeling of residual stress-induced stress–strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface
627
Modeling of residual stress-induced stress–strain behavior of unidirectional brittle fiber/brittle matrix composite with weak interface
628
Modeling of resistance curve of high-angle grain boundary in Fe–3 wt.% Si alloy
629
Modeling of resistance curve of high-angle grain boundary in Fe–3 wt.% Si alloy
630
Modeling of resistance spot welding of multiple stacks of steel sheets
631
Modeling of retention behavior in capillary electrochromatography from chromatographic and electrophoretic data
632
Modeling of retrograde diffusion zoning in garnet: evidence for slow cooling of granulites from the Highland Complex of Sri Lanka
633
Modeling of retrograde nanoparticle transport in axons and dendrites
634
Modeling of reverse osmosis systems Original Research Article
635
Modeling of Reversible Chain Transfer Catalyzed Polymerization by Moment Equations Method
636
Modeling of RF Absorber for Application in the Design of Anechoic Chamber
637
Modeling of RF Waves in Free Space Optical Communication System Under Gamma-Gamma Turbulent Channel Effect
638
Modeling of Rheological Characteristics of “MalasYazdi” (Punicia granatum L.) Pomegranate Juice
639
Modeling of rheological properties of mellorine mix including different oil and gum types by combined design, ANN, and ANFIS models
640
Modeling of rhythmic behavior in neutral lipid production due to continuous supply of limited nitrogen: Mutual growth and lipid accumulation in microalgae
641
Modeling of rice hydration using finite elements Original Research Article
642
Modeling of River Velocity, Temperature, Bed Deformation and its Effects on Rainbow Trout (Oncorhynchus mykiss) Habitat in Lees Ferry, Colorado River
643
MODELING OF RIYADH SEWAGE TREATMENT PLANT: 1-MODEL DEVELOPMENT, VERIFICATION AND SIMULATION
644
Modeling of Road Accidents Using the Model ofRoads of Qazvin, Zanjan and Hamadan)
645
Modeling of Robustness Margins of the Control of a Predictive Control-Supervisory Architecture
646
Modeling of rolling contact fatigue for hard machined components with process-induced residual stress
647
Modeling of rolling texture in aluminum
648
Modeling of rolling texture in aluminum
649
Modeling of rollover sequences
650
Modeling of Rotary Cement Kilns: Applications to Reduction in Energy Consumption
651
Modeling of rotary vane compressor applying artificial neural network
652
Modeling of rotating drum bioreactor for anaerobic solid-state fermentation
653
Modeling of route planning system based on Q value-based dynamic programming with multi-agent reinforcement learning algorithms
654
Modeling of route planning system based on Q value-based dynamic programming with multi-agent reinforcement learning algorithms
655
Modeling of Sago Starch Hydrolysis Using Glucoamylase
656
Modeling of Salmonella typhimurium growth under the effects of Carum copticum essential oil, temperature, pH and inoculum size
657
Modeling of salt tectonics Original Research Article
658
MODELING OF SATURATED HYDRAULIC CONDUCTIVITY AND MEAN SOIL PORE DIAMETER IN AN ALLUVIAL LOAMY SOIL
659
Modeling of scalar dissipation in partially premixed turbulent flames
660
Modeling of scavenging processes in clouds: some remaining questions about the partitioning of gases among gas and liquid phases
661
Modeling of SCC initiation and propagation mechanisms in BWR environments
662
Modeling of scintillation camera systems
663
Modeling of scintillation camera systems
664
Modeling of scroll compressors – Improvements
665
Modeling of Sediment Yield and Bicarbonate Concentration in Kordan Watershed
666
Modeling of sediment yield in Maybar gauged watershed using SWAT, northeast Ethiopia
667
Modeling of seismic hazard for Turkey using the recent neotectonic data
668
Modeling of seismic wave motion in high-rise buildings
669
Modeling of Selective Silver Extraction from Photographic Waste by Emulsion Liquid Membrane System
670
Modeling of self-consistent distributions for longitudinally non-uniform beams
671
Modeling of self-consistent distributions for longitudinally non-uniform beams
672
Modeling of self-excited wake oscillations by amplitude equations
673
Modeling of Self-Healing Concrete: A Review
674
Modeling of self-organized systems interacting with a few individuals: From microscopic to macroscopic dynamics
675
Modeling of Self-regulation based on Cognitive Flexibility with Mediated Role of Psychological Hardiness in Students
676
Modeling of separations by closed-loop steady-state recycling chromatography of a racemic pharmaceutical intermediate
677
Modeling of sequence geometry north of Gargano Peninsula by changing sediment pathways in the Adriatic Sea
678
Modeling of SH- and P-SV-wave fields and seismic microzonation based on response spectra for Talchir Basin, India
679
Modeling of shape memory alloy shells for design optimization
680
Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality
681
Modeling of shear instabilities observed in cylinder collapse experiments performed on ceramic powders Original Research Article
682
Modeling of shear localization during confined granular flow in silos within non-local hypoplasticity
683
Modeling of shear-wall dominant symmetrical flat-plate reinforced concrete buildings
684
Modeling of shell and tube heat recovery exchanger operated with nanofluid based coolants
685
Modeling of shrinkage defects during solidification of long and short freezing materials
686
Modeling of SiCf/SiC composite structures for nuclear components
687
Modeling of side reactions of isobutane alkylation with butenes catalyzed by trifluoromethane sulfonic acid Original Research Article
688
Modeling of Sigma Delta Modulator based Phase Locked Loop
689
Modeling of Signal Generation Function and Electron Penetration Effects on the EBIC Signal of Schottky diodes of Ge
690
Modeling of signaling pathways for endocrine disruptors
691
Modeling of silica sol–gel thin films with ballistic aggregation
692
Modeling of silicon atomic-layer-epitaxy
693
Modeling of silicon carbide chemical vapor deposition in a vertical reactor
694
Modeling of silicon carbide chemical vapor deposition in a vertical reactor
695
Modeling of simultaneous ground shock and airblast pressure on nearby structures from surface explosions
696
Modeling of simultaneous heat and mass transfer during convective oven ring cake baking Original Research Article
697
Modeling of simultaneous mass transfer and structural changes in fruit tissues Original Research Article
698
Modeling of single catalyst particle in cathode of PEM fuel cells
699
Modeling of Single Cell Protein Production from Cheese Whey Using Tanks-in-Series Model
700
Modeling of singular stress fields using finite element metho
701
Modeling of site occupancies in B2 FeAl and NiAl alloys with ternary additions Original Research Article
702
Modeling of Six Openers for Seeding Machines, Cross-Shaped, T-Inverse, U-Shaped, V-Shaped, V-Shaped with Two Plates and Tulip-Shaped
703
Modeling of size-dependent internal stresses in dislocation cell structures
704
Modeling of size-exclusion chromatography of electrolytes on non-ionic nanoporous adsorbents
705
Modeling of skutterudite CoSb3 with molecular dynamics method
706
Modeling of slow glutamate diffusion and AMPA receptor activation in the cerebellar glomerulus
707
Modeling of slow time-scale behavior of fast molecular dynamic systems
708
Modeling of smart composite box beams with nonlinear induced strain
709
Modeling of smart composites on account of actuation, thermal conductivity and hygroscopic absorption
710
Modeling of smart concrete beams with shape memory alloy actuators
711
Modeling of smoldering process in a porous biomass fuel rod
712
Modeling of SO2 gas pollutant emission of Arak Refinery using AERMOD model
713
Modeling of SO2 removal in fabric filter
714
Modeling of SO2 scrubbing in spray towers
715
Modeling of SOFC running on partially pre-reformed gas mixture
716
Modeling of SOFC with indirect internal reforming operation: Comparison of conventional packed-bed and catalytic coated-wall internal reformer
717
Modeling of soil displacement and soil strain distribution under a traveling wheel
718
Modeling of soil erosion and sediment transport in the East River Basin in southern China Original Research Article
719
Modeling of Soil Erosion Intensity and Estimation of Soil Erosion Risk in Upper Part of Shkumbini Watershed in Albania
720
Modeling of soil temperature and moisture with and without rice husks in an agriculture greenhouse
721
Modeling of soil vapor extraction (SVE) systems — Part I
722
Modeling of soil vapor extraction (SVE) systems — Part II. Biodegradation aspects of soil vapor extraction
723
Modeling of soil water retention curve using soil solid phase parameters
724
Modeling of soiling based on silica-soda-lime glass exposure at six European sites
725
Modeling of solar passive techniques for roof cooling in arid regions
726
Modeling of Solar Radiation on Part Shaded Walls
727
Modeling of Solar Radiation Potential in Iran Using Artificial Neural Networks
728
Modeling of solid fuel combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 2. Numerical simulations of heat transfer and gaseous pollutant emissions associated with coal combustion in O2/CO2 and O2/N2 atmospheres enriched wi
729
Modeling of solid fuels combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 1. The mathematical model of fuel combustion in oxygen-enriched CFB environment
730
Modeling of Solid Liquid Equilibrium for Tertiary Mixtures of Fatty Acid by Wilson Model
731
Modeling of solid oxide electrolysis cell for syngas generation with detailed surface chemistry
732
Modeling of solid oxide fuel cells for dynamic simulations of integrated systems
733
Modeling of solid particles pyrolysis
734
Modeling of solid waste collection and transportation in metropolitan areas using WAGS model: implication of CO2 emission and external costs
735
Modeling of solidification in twin-roll strip casting
736
Modeling of Solidification Microstructures Based on Fully Coupling of Macro-transport Phenomena with Cellular Automata
737
Modeling of solid–liquid equilibria for systems with solid-complex phase formation
738
Modeling of solid–liquid equilibria in naphthalene, normal-alkane and polyethylene solutions
739
Modeling of Solid-State Polymerization of Bisphenol A Polycarbonate
740
Modeling of solid–supercritical fluid phase equilibria with a cubic equation of state—Gex model
741
Modeling of solutal dendritic growth with melt convection
742
Modeling of solute drag in the massive phase transformation Original Research Article
743
Modeling of solute transport in a single fracture using streamline simulation and experimental validation
744
Modeling of solute transport into sub-aqueous sediments
745
Modeling of solvent effects in the activation of the lipase from Rhizomucor miehei
746
Modeling of some plain load distribution strategies for jobs in a multicomputer system
747
Modeling of some properties of the crushed tile concretes exposed to elevated temperatures
748
Modeling of soot deposition in wavy-fin exhaust gas recirculator coolers
749
Modeling of soot formation during partial oxidation of producer gas
750
Modeling of soot particle inception in aromatic and aliphatic premixed flames
751
Modeling of soot particles growth in fuel-rich premixed flame
752
Modeling of Sorption and Biodegradation of Parathion and Its Metabolite Paraoxon in Soil
753
Modeling of Sorption-Enhanced Steam Reforming in a Dual Fluidized Bubbling Bed Reactor
754
Modeling of space charge dominated performance of the CEBAF FEL injector
755
Modeling of spatial–temporal distribution of the components in the drying sessile droplet of biological fluid
756
Modeling of speech signals using an optimal neural network structure based on the PMDL principle
757
Modeling of Speed in Vehicles Entering Two-Way Suburban Tunnels by Adaptive Neuro Fuzzy Inference System
758
Modeling of spherulitic crystallization in thermoplastic tow-placement process: heat transfer analysis
759
Modeling of spherulitic crystallization in thermoplastic tow-placement process: spherulitic microstructure evolution
760
Modeling of spiral wound pervaporation modules with application to the separation of styrene/ethylbenzene mixtures
761
Modeling of splat particle splashing data during thermal spraying with the Burr distribution
762
Modeling of sporicidal effect of hydrogen peroxide in the sterilization of low density polyethylene film inoculated with Bacillus subtilis spores
763
Modeling of spraying with time-dependent material feed rate
764
Modeling of spring-back in V-die bending process by using fuzzy learning back-propagation algorithm
765
Modeling of springback, strain rate and Bauschinger effects for two-dimensional steady state cyclic flow of sheet metal subjected to bending under tension
766
Modeling of springback, strain rate and Bauschinger effects for two-dimensional steady state cyclic flow of sheet metal subjected to bending under tension
767
Modeling of sputtering erosion/redeposition—status and implications for fusion design
768
Modeling of stability constants of mono-complexes of La3+, Ce3+, Pr3+, and Nd3+ with carboxylic acids in water–dioxane solutions by using connectivity index 3χv
769
Modeling of stability of the condensing interface in a capillary pumped loop
770
Modeling of starch retrogradation onset in its aqueous solution using thermoreversible gelation concept
771
Modeling of Start-Up and Shut-Down Power Trajectories of Thermal Units
772
Modeling of static concentrator modules incorporating lambertian or v-groove rear reflectors
773
Modeling of Static VAR’s Compensators in Fast Decoupled Load Flow.
774
Modeling of steam plasma gasification for municipal solid waste
775
Modeling of Steam-Clad Interactions Under Severe Accident Conditions in Nuclear Power Light Water Reactors
776
Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams
777
Modeling of steel frame structures in fire using OpenSees
778
Modeling of steel microstructure evolution during thermo-mechanical rolling of plate for conveying pipes
779
Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy
780
Modeling of stiffness of FRP composites under elevated and high temperatures
781
Modeling of stochastic properties of fast cracks in quasi-brittle materials
782
Modeling of strain hardening and creep behaviour of 2024T3 aluminium alloy at room and high temperatures
783
Modeling of strain rate effects for concrete with viscoelasticity and retarded damage
784
Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels Original Research Article
785
Modeling of stratigraphic architectural patterns in extensional settings—towards a conceptual model
786
Modeling of stream–aquifer interaction: the embedded multireservoir model
787
Modeling of streamflow- suspended sediment load relationship by adaptive neuro-fuzzy and artificial neural network approaches (Case study: Dalaki River, Iran)
788
Modeling of streaming and elastic flow integration in OFDMA-based IEEE802.16 WiMAX
789
Modeling of Stress Changes at Mayon Volcano, Philippines
790
Modeling of Stress Distribution During Strip Coiling Process Original Research Article
791
Modeling of stress induced nitrogen diffusion in nitrided stainless steel
792
Modeling of stress–strain curves for Pd40Ni10Cu30P20 glass alloy under constant strain-rate deformation
793
Modeling of stress–strain curves for Pd40Ni10Cu30P20 glass alloy under constant strain-rate deformation
794
Modeling of Strip Heating Process in Vertical Continuous Annealing Furnace Original Research Article
795
Modeling of Strip Temperature in Rapid Cooling Section of Vertical Continuous Annealing Furnace Original Research Article
796
Modeling of structural coupling for assessment of modal properties of twin tall buildings with a skybridge
797
Modeling of structure–mutagenicity relationships: counter propagation neural network approach using calculated structural descriptors
798
Modeling of structure–mutagenicity relationships: counter propagation neural network approach using calculated structural descriptors Original Research Article
799
Modeling of Structures in the Mechanics of Composites
800
Modeling of structures subjected to impact: concrete behaviour under high strain rate
801
Modeling of subduction components in the Genesis of the Meso-Cenozoic igneous rocks from the South Shetland Arc, Antarctica
802
Modeling of sub-ionospheric VLF signal perturbations associated with total solar eclipse, 2009 in Indian subcontinent Original Research Article
803
Modeling of submerged membrane bioreactor process for wastewater treatment Original Research Article
804
Modeling of substrate degradation and oxygen consumption in waste composting processes
805
MODELING OF SUBSTRATE NOISE IMPACT ON A SINGLE-ENDED CASCODE LNA IN A LIGHTLY DOPED SUBSTRATE
806
Modeling of suction distributions in an unsaturated heterogeneous residual soil slope
807
Modeling of sudden hydrogen expansion from cryogenic pressure vessel failure
808
Modeling of Suitability Iranian Oak site for establish of coppice regeneration in Zagros forest
809
Modeling of Suitability Iranian Oak site for establish of coppice regeneration in Zagros forest
810
Modeling of Suitability Iranian Oak site for establishing of coppice regeneration in Zagros forest
811
Modeling of sulfate reduction in anaerobic solid substrate bioreactors for mine drainage treatment
812
Modeling of sulfur dioxide emissions in Ahvaz City , southwest of Iran during 2013
813
Modeling of sulfur gases and chemiions in aircraft engines
814
Modeling of sulfur plugging in a sour gas reservoir
815
Modeling of sulphonation of tridecylbenzene in a falling film reactor
816
Modeling of supercritical fluid flow through a yarn package
817
Modeling Of Superheated Steam Drying Of Wood Particles
818
Modeling of supersonic plasma flow in the scrape-off layer
819
Modeling of Supply Chain for Defective Goods Using Jit-Logistics
820
Modeling of surface and bulk effects in thin-film Pd cathodes with high proton loading
821
Modeling of surface cracks in rolling contact
822
Modeling of surface finish in electro-discharge machining based upon statistical multi-parameter analysis
823
Modeling of Surface Generation in Contour Grinding of Optical Molds
824
Modeling of surface reaction in tritium release from lithium ceramics and its comparison with transient experiments
825
Modeling of surface reactions on carbonaceous atmospheric particles during a wood smoke episode in Houston, Texas
826
Modeling of surface roughening induced by laser ablation
827
Modeling of surface roughness in precision machining of metal matrix composites using ANN
828
Modeling of Surface Runoff in Xitiaoxi Catchment, China
829
Modeling of Surface-mounted Permanent Magnet Synchronous Motors with Inner and Outer Rotor Types
830
Modeling of swift heavy ions interaction with dense matter
831
Modeling of swift heavy ions interaction with dense matter
832
Modeling of swift heavy ions interaction with dense matter
833
Modeling of synchronous machines with magnetic saturation
834
Modeling of synergistic effects in flame inhibition by 2-H heptafluoropropane blended with sodium bicarbonate
835
Modeling of synthesis gas and hydrogen production in a thermally coupling of steam and tri-reforming of methane with membranes
836
Modeling of system dynamics of a slewing flexible beam with moving payload pendulum
837
Modeling of system reliability Petri nets with aging tokens
838
Modeling of system reliability Petri nets with aging tokens
839
Modeling of TABS-based thermally manageable buildings in Simulink
840
Modeling of tacit knowledge in industry: Simulations on the variables of industrial processes
841
Modeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis
842
Modeling of Taylor bubble rising in a vertical mini noncircular channel filled with a stagnant liquid
843
Modeling of Tehran South Water Treatment Plant Using Neural Network and Fuzzy Logic Considering Effluent and Sludge Parameters
844
Modeling of Temperature Dependency of Silicon Nitride Formation’s Kinetics during Reaction Bonded Method
845
Modeling of temperature distribution in ultrasonic welding of thermoplastics for various joint designs
846
Modeling of temperature distributions in canned tomato based dip during industrial pasteurization Original Research Article
847
Modeling of temperature field and grain growth of a dual phase steel DP980 in direct diode laser heat treatment
848
Modeling of temperature fields in the graphite target at pulsed laser deposition of CNx films
849
Modeling of temperature gradients in packed-bed solid-state bioreactors
850
Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics
851
Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics
852
Modeling of temperature sensor built on GaN nanostructures
853
Modeling of temporal variations of vertical concentration profile of 7Be in the atmosphere
854
Modeling of tensile strength on moist granular earth material at low water content
855
Modeling of tension modulation nonlinearity in plucked strings
856
Modeling of ternary element site substitution in NiAl
857
Modeling of ternary solubilities of organics in supercritical carbon dioxide
858
Modeling of ternary solubilities of solids in supercritical carbon dioxide in the presence of cosolvents or cosolutes
859
Modeling of terrain impact caused by tracked vehicles
860
Modeling of textural anisotropy in granular materials with stochastic micro-polar hypoplasticity
861
Modeling of textural changes during drying of potato slices Original Research Article
862
Modeling of texture evolution in the deformation zone of second-phase particles Original Research Article
863
Modeling of textured aluminum alloys used in a bumper system: Material tests and characterization
864
Modeling of TG curves of isothermal oxidation of graphite
865
Modeling of the [E43S]SNase-ssDNA–Cd2+ complex: Structural insight into the action of nuclease on ssDNA
866
Modeling of the ‘hydration shell’ of uracil and thymine in small water clusters by DFT and MP2 methods
867
Modeling of the 2001 lava flow at Etna volcano by a Cellular Automata approach
868
Modeling of the AC arc discharge on ice surfaces
869
Modeling of the adsorption kinetics of Basic Red 46 on single-walled carbon nanotube and carboxylate group functionalized single-walled carbon nanotube
870
Modeling of the Amino Acid Side Chain Effects on Peptide Conformation
871
Modeling of the angle of shearing resistance of soils using soft computing systems
872
Modeling of the anisotropic elastic properties of plasma-sprayed coatings in relation to their microstructure Original Research Article
873
Modeling of the appliance, lighting, and space-cooling energy consumptions in the residential sector using neural networks
874
Modeling of the APS plasma spray process using artificial neural networks: basis, requirements and an example
875
Modeling of the asymmetric low-cycle loading in the space of stresses
876
Modeling of the atomic structure and electronic properties of amorphous GaN1−xAsx
877
Modeling of the Behavior of Concrete Tension Members Reinforced with FRP Rods
878
Modeling of the Behavior of Expansive Soils
879
Modeling of the beryllia ceramics formation process
880
Modeling of the Binding Mode of a Non-covalent Inhibitor of the 20S Proteasome. Application to Structure-Based Analogue Design
881
Modeling of the Binding of Peptide Blockers to Voltage-Gated Potassium Channels: Approaches and Evidence
882
Modeling of the biodynamic responses distributed at the fingers and palm of the hand in three orthogonal directions
883
Modeling of the b-SiC 001/ 3=2/ surface reconstruction
884
Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model I. Model examination and apparent reaction rate constants
885
Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency
886
Modeling of the bulk versus SOI CMOS performances for the optimal design of APS circuits in low-power low-voltage applications
887
Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch
888
Modeling of the carbon dioxide capture process system using machine intelligence approaches
889
Modeling of the carbon dioxide capture process system using machine intelligence approaches
890
Modeling of the carbon-rich c(4 × 4) reconstruction on Si(1 0 0)
891
Modeling of the carburizing and nitriding processes
892
Modeling of the catalytic properties of high-temperature surface insulation in a dissociated carbon dioxide — Nitrogen mixture
893
Modeling of the charge acceptance of lead–acid batteries
894
Modeling of the charge and discharge processes in energy storage cells
895
Modeling of the charging characteristic of linear-type superconducting power supply using granular-based radial basis function neural networks
896
Modeling of the charging dynamics in silicon nanocrystal nonvolatile flash memory cells
897
Modeling of the chemical-looping combustion of methane using a Cu-based oxygen-carrier
898
Modeling of the classification behavior of the diaphragms used in multi-chamber cement mills
899
Modeling of the cloud and radiation processes observed during SHEBA
900
Modeling of the CO2 Separation Process from Acid Gas Feed into the Sulfur Recovery Unit of Asaluyeh Phase 1 Using Membrane
901
Modeling of the condensation sink term in an interfacial area transport equation
902
Modeling of the conduction in a WO3 thin film as ozone sensor
903
Modeling of the connection road surface microtexture/water depth/friction
904
Modeling of the Contact–Adsorption–Regeneration (CAR) activated sludge process
905
Modeling of the daily rainfall-runoff relationship with artificial neural network
906
Modeling of the deactivation kinetics for the combustion of ethyl acetate and benzene present in the air stream over ZSM-5 catalyst loaded with chromium
907
Modeling of the defaultable term structure: conditionally Markov approach
908
MODELING OF THE DEFORMATION OF THE TERRAIN FOR InSAR PROJECT
909
Modeling of the deposition of Ni and Pd on Mo(1 1 0)
910
Modeling of the devolatilization kinetics during pyrolysis of grape residues
911
Modeling of the Dissolution Kinetics of Arbutus Wild Berries-Based Tablets as Evaluated by Electric Conductivity
912
Modeling of the dynamic adsorption of an anionic dye through ion-exchange membrane adsorber
913
Modeling of the dynamic delamination of L-shaped unidirectional laminated composites
914
Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation
915
Modeling of the dynamic wetting behavior in a capillary tube considering the macroscopic–microscopic contact angle relation and generalized Navier boundary condition
916
Modeling of the dynamics of a slug of liquid oxygen in a magnetic field and experimental verification Original Research Article
917
Modeling of the dynamics of metal deposition inside a flow-through porous electrode with low initial conductivity
918
Modeling of the dynamics of tendon-driven robotic mechanisms with flexible tendons
919
Modeling of the Earth’s rotation variations using a novel approach inspired by the brain emotional learning
920
Modeling of the effect of Al2O3 interlayer on residual stress due to oxide scale in thermal barrier coatings
921
Modeling of the effect of cavitation on tensile failure of superplastic alloys
922
Modeling of the effect of coping with stress styles on GAD by brain’s executive functions
923
Modeling of the effect of land use changes on the runoff generation of a river basin through parameter regionalization of a watershed model
924
Modeling of the Effect of MgO and ZrO2 on Sintering of Alumina
925
Modeling of the Effect of Potassium Bicarbonate on Sclerotial Germination of Sclerotinia sclerotiorum in vitro by Multi Regression Analysis
926
Modeling of the effect of the hot-deformation parameters on the strength of Al-base metal–matrix composites by the use of a radial-base function (RBF) network
927
Modeling of the effect of the β phase deformation on the α phase precipitation in near-β titanium alloys Original Research Article
928
Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials
929
Modeling of the Effective Thermal Conductivity of Consolidated Porous Media with Different Saturants: A Test Case of Gabbro Rocks
930
Modeling of the effects of athermal flow strength and activation energy for dislocation glide on the nanoindentation creep of nickel thin film at room temperature
931
Modeling of the effects of length to diameter ratio and nozzle number on the performance of counterflow Ranque–Hilsch vortex tubes using artificial neural networks
932
Modeling of the effects of propagating thrust slip on pore pressures and implications for monitoring
933
Modeling of the efficiency of fibrous filters through numerical simulation and X-ray tomography
934
Modeling of the electrical parameters of a wire-cylinder electrostatic precipitator under pulse energization
935
Modeling of the ElectriCOIL system
936
Modeling of the electromagnetic forming of sheet metals: state-of-the-art and future needs
937
Modeling of the electronic, optoelectronics, photonic and thermodynamics properties of 1,4-bis(3-carboxyl-3-oxo-prop-1-enyl) benzene molecule
938
Modeling of the energy demand of the residential sector in the United States using regression models and artificial neural networks
939
Modeling of the equilibrium moisture content (EMC) of Miscanthus (Miscanthus × giganteus)
940
Modeling of the expansion of laser-evaporated matter in argon, helium and nitrogen and the condensation of clusters
941
Modeling of the extraction of uranium (VI) from concentrated phosphoric acid by synergistic mixtures of bis-(2-ethylhexyl)-phosphoric acid and tri-n-octylphosphine oxide
942
Modeling of the field emitter triode (FET) as a displacement/pressure sensor
943
Modeling of the field features of the SR factory magnetic elements
944
Modeling of the field features of the SR factory magnetic elements
945
Modeling of the Fischer–Tropsch synthesis in slurry bubble column reactors
946
MODELING OF THE FLIGHT OF A HIGH-SPEED ELASTIC MISSILE WITH LATTICED CONTROL SURFACES
947
MODELING OF THE FLIGHT OF A HIGH-SPEED ELASTIC MISSILE WITH LATTICED CONTROL SURFACES
948
Modeling of the fluctuating component in the form of the sum of an infinite number of random quantities. Part 1: k–ε Modeling
949
Modeling of the fluctuating component in the form of the sum of an infinite number of random quantities. Part 2. Model of transfer of turbulent stresses and turbulent heat fluxes
950
Modeling of the fluid structure interaction of a human trachea under different ventilation conditions
951
Modeling of the fracture of a coating under sliding indentation
952
Modeling of the Free-Radical Copolymerization Kinetics with Cross Linking of Vinyl/Divinyl Monomers in Supercritical Carbon Dioxide
953
Modeling of the frequency- and temperature-dependent absorption coefficient of long-wave-infrared (2-25 (mu)m) transmitting materials
954
Modeling of the friction caused by lubrication and surface roughness in sheet metal forming
955
Modeling of the gaseous diffusion coefficient in the presence of NAPL
956
Modeling of the gaseous diffusion coefficient through unsaturated soil systems
957
Modeling of the gas–particle flow in industrial classification chambers for design optimization
958
Modeling of the GELINA neutron target using coupled electron–photon–neutron transport with the MCNP4C3 code
959
Modeling of the GELINA neutron target using coupled electron–photon–neutron transport with the MCNP4C3 code
960
Modeling of the generalized unified power flow controller (GUPFC) in a nonlinear interior point OPF
961
Modeling of the Genetic Switch of Bacteriophage TP901-1: A Heteromer of CI and MOR Ensures Robust Bistability
962
Modeling of the glottal flow derivative waveform with application to speaker identification
963
Modeling of the grain boundary segregation of helium in α-Fe
964
Modeling of the green body drying step to obtain large size transparent magnesium-aluminate spinel samples
965
Modeling of the ground plane in electrostatic BEM analysis of MEMS and NEMS
966
Modeling of the grounding resistance variation using ARMA models
967
Modeling of the Guagua Pichincha volcano (Ecuador) lahars
968
Modeling of the heat transfer and flow features of the thermal plasma reactor with counter-flow gas injection
969
Modeling of the heat transfer in a portable PEFC system within MATLAB-Simulink
970
Modeling of the heat transfer in laser-heated small particles on surfaces
971
Modeling of the heat transfer performance of plate-type dispersion nuclear fuel elements
972
Modeling of the HESCO nozzle diffuser used in IEA Annex-20 experiment test room
973
Modeling of the high temperature behaviour of IN792 in gas turbine hot parts
974
Modeling of the high temperature flow behavior of stabilized 12–27 wt% Cr ferritic stainless steels
975
Modeling of the hot flow behavior of advanced ultra-high strength steels (A-UHSS) microalloyed with boron
976
Modeling of the Hydrocracking Reactor by the CESE Method
977
Modeling of the Hydrodesulfurization process of natural gas condensates
978
Modeling of the hydrodynamics of the fully developed region in a downer reactor
979
Modeling of the impact of dolomite and biotite dissolution on vermiculite composition in a gneissic shallow aquifer of the Sila Massif (Calabria, Italy)
980
Modeling of the induced chemo-mechanical stress through porous cement mortar subjected to CO2: Enhanced micro-dilatation theory and 14C-PMMA method
981
Modeling of the influence of coarsening on viscoplastic behavior of a 319 foundry aluminum alloy
982
Modeling of the influence of fibers on creep of fiber reinforced cementitious composite
983
Modeling of the influence of fibers on creep of fiber reinforced cementitious composite
984
Modeling of the influence of H2O on metal oxide sensor responses to CO
985
Modeling of the influence of parasitic coupling between a component and its feeding line on scattering parameters
986
Modeling of the influence of the self noise on the array gain of a sonar system
987
Modeling of the influence of transverse cracking on chloride penetration into concrete
988
Modeling of the Inhibition Mechanism of Acrylic Acid Polymerization
989
Modeling of the initial deposition of individual particles during the cross-flow membrane filtration
990
Modeling of the initial stage in vibratory cavitation erosion tests by use of a Weibull distribution
991
Modeling of the inlet zone in the mixed lubrication situation of cold strip rolling
992
Modeling of the interface behavior in tape casting of functionally graded ceramics for magnetic refrigeration parts
993
Modeling of the interfacial shear in the 3D momentum equations of TRAC-BF1
994
Modeling of the inter-granular energy-barrier height in very-fine nanograins through a semi-classical approach
995
Modeling of the intermolecular Force-Induced Adhesion in Freestanding Nanostructures Made of Nano-beams
996
Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing
997
Modeling of the Interphase of Polymer-Matrix Composites: Determination of Its Structure and Mechanical Properties
998
Modeling of the I–V curves of the PV modules using linear interpolation/extrapolation
999
Modeling of the Josephson fluxonic diode
1000
Modeling of the kinetics of the heterogeneous-homogeneous conversion of methane into ethane and ethylene in the absence of oxygen in the gas phase
