بر اساس عنوان

1
Modelling of friction stir welding of 7xxx aluminium alloys
2
Modelling of friction stir welding of 7xxx aluminium alloys
3
Modelling of froth transportation in industrial flotation cells: Part I. Development of froth transportation models for attached particles
4
Modelling of froth transportation in industrial flotation cells: Part II. Modelling of froth transportation in an Outokumpu tank flotation cell at the Anglo Platinum Bafokeng–Rasimone Platinum Mine (BRPM) concentrator
5
Modelling of fuel bundle vibration and the associated fretting wear in a CANDU fuel channel
6
Modelling of fuel cells using multi-domain VHDL-AMS language
7
Modelling of fused cast alumina refractory
8
Modelling of fused cast alumina refractory
9
Modelling of galactic Carbon in an asymmetrical heliosphere: Effects of asymmetrical modulation conditions Original Research Article
10
Modelling of gas chromatographic retention indices using counterpropagation neural networks
11
Modelling of gas clathrate hydrate equilibria using the electrolyte non-random two-liquid (eNRTL) model
12
Modelling of gas entrainment from Taylor bubbles. Part A: Slug flow
13
Modelling of gas entrainment from Taylor bubbles. Part B: A stationary bubble
14
Modelling of Gas Metal Arc Welding Process on Angular Distortion of T Joint
15
Modelling of gas permeability for membranes prepared by PECVD
16
Modelling of gas permeation through ceramic coatings produced by thermal spraying Original Research Article
17
Modelling of gas pressure effects on anaerobic digestion
18
Modelling of gas transport phenomena in SOFC anodes
19
Modelling of gas transport properties of polymer electrolytes containing various amounts of water
20
Modelling of gas–liquid reactors — implementation of the penetration model in dynamic modelling of gas–liquid processes with the presence of a liquid bulk
21
Modelling of Gas-Liquid/Gas-Liquid-Solid Flows in Bubble Columns: Experiments and CFD Simulations
22
Modelling of gearbox dynamics under time-varying nonstationary load for distributed fault detection and diagnosis
23
Modelling of geochemical and isotopic changes in a column experiment for degradation of TCE by zero-valent iron
24
Modelling of geochemical reactions and experimental cation exchange in MX80 bentonite
25
Modelling of Glow Discharge Optical Emission Spectroscopy depth profiles of metal (Cr,Ti) multilayer coatings
26
Modelling of Glow Discharge Optical Emission Spectroscopy depth profiles of metal (Cr,Ti) multilayer coatings
27
Modelling of gold (I) cyanide adsorption based on the properties of activated bagasse
28
Modelling of grain boundary resistivities of n-conducting BaTiO3 ceramics
29
Modelling of grain face bubbles coalescence in irradiated UO2 fuel
30
Modelling of grain size transition with alloy concentration in solidified Al–Si alloys
31
Modelling of granular mixtures placing. Comparison between a 3D full-digital model and a 3D semi-digital model
32
Modelling of granule formation process of powdered materials by the method of rolling
33
Modelling of grate combustion in a medium scale biomass furnace for control purposes
34
Modelling of grazing incidence X-ray diffraction spectra from Mo-implanted stainless steel: Comparison with experimental data
35
Modelling of Greenhouse Gas Emissions from Wheat Production in Irrigated and Rain-Fed Systems in Khorasan Razavi Province, Iran
36
Modelling of grinding gap macro geometry and workpiece kinematics in throughfeed centreless grinding
37
Modelling of ground acceleration in the near source range: the case of 1976, Friuli earthquake (M = 6.5), northern Italy
38
Modelling of groundwater–vegetation interactions in a tidal marsh
39
Modelling of growth of aflatoxigenic A. flavus isolates from red chilli powder as a function of water availability
40
Modelling of growth of thin solid ®lms obtained by pulsed laser deposition
41
Modelling of growth of three-dimensional cracks by a continuous distribution of dislocation loops
42
Modelling of growth, growth/no-growth interface and nonthermal inactivation areas of Listeria in foods
43
Modelling of H1N1 Flu in Iran
44
Modelling of H2/D2 exchange over Pd
45
Modelling of halomethanes using neural networks
46
Modelling of hard part machining
47
Modelling of hardening due to grain growth for a superplastic alloy
48
Modelling of haze and cloud chemistry: comparison of different model approaches
49
Modelling of heat and mass transfer during (osmo) dehydrofreezing of fruits Original Research Article
50
Modelling of heat and mass transfer in a horizontal-tube falling-film condenser for brackish water desalination in remote areas Original Research Article
51
Modelling of heat and mass transfer in a tunnel dryer
52
Modelling of heat and mass transfer inside a traditional oasis: Experimental validation
53
Modelling of heat and mass transfer inside a traditional oasis: Experimental validation
54
Modelling of heat and mass transfer processes during core melt discharge from a reactor pressure vessel Original Research Article
55
Modelling of heat and moisture transfer in buildings: I. Model program
56
Modelling of heat and moisture transfer in buildings: II. Applications to indoor thermal and moisture control
57
Modelling of heat and moisture transfer in desiccant packed bed utilizing spherical particles of clay impregnated with CaCl2
58
Modelling of heat conduction and phase transformations during sliding of railway wheels
59
Modelling of heat deposition onto the Tore Supra toroidal pumped limiter
60
Modelling of heat transfer and hydrodynamic with two kinetics approaches during supercritical water oxidation process
61
Modelling of heat transfer at glass/mould interface in press and blow forming processes
62
Modelling of heat transfer in a laminar flow through a helical pipe
63
Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures
64
Modelling of heat transport in magnetised plasmas using non-aligned coordinates
65
Modelling of heat, mass and charge transfer in a PEMFC single cell
66
Modelling of heating and evaporation of gasoline fuel droplets: A comparative analysis of approximations
67
Modelling of heavy and buoyant particle dispersion in a two-dimensional turbulent mixing layer
68
Modelling of heavy metal adsorption into activated carbon from apricot stones in fluidized bed
69
Modelling of heavy metals adsorption to a chelating resin in a fluidized bed reactor
70
Modelling of helium-mediated quench propagation in the LHC prototype test string-1 Original Research Article
71
Modelling of heterogeneities inside polymer electrolyte fuel cells due to oxidants
72
Modelling of heterogeneous precipitate distribution evolution during friction stir welding process Original Research Article
73
Modelling of hexadecane degradation in continuousflow cultures
74
Modelling of hexadecane degradation in continuous-flow cultures
75
Modelling of high quality pasta drying: mathematical model and validation Original Research Article
76
Modelling of high quality pasta drying: quality indices and industrial application Original Research Article
77
Modelling of High Quantum Efficiency Avalanche Photodiode
78
Modelling of high temperature asymmetric creep behavior of ceramics
79
Modelling of high temperature fatigue crack growth in Inconel 718 under hold time conditions
80
Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys Original Research Article
81
Modelling of high velocity, loose abrasive machining processes
82
Modelling of high-aspect ratio microdrilling of polymers with UV laser ablation
83
Modelling of high-chromia refractory spalling in slagging coal gasifiers
84
Modelling of highly-heterogeneous media using a flux-vector-based Green element method
85
Modelling of high-pressure dense diesel sprays with adaptive local grid refinement
86
Modelling of high-pressure phase equilibria using the Sako–Wu–Prausnitz equation of state: I. Pure-components and heavy n-alkane solutions
87
Modelling of high-pressure phase equilibria using the Sako–Wu–Prausnitz equation of state: II. Vapour–liquid equilibria and liquid–liquid equilibria in polyolefin systems
88
Modelling of historical masonry structures: comparison of different approaches through a case study
89
Modelling of hot carrier solar cell absorbers
90
Modelling of hot cracking in welding with a cellular automaton combined with an intergranular fluid flow model
91
Modelling of hot strip rolling process using a hybrid neural network approach
92
Modelling of HTRs with Monte Carlo: from a homogeneous to an exact heterogeneous core with microparticles
93
Modelling of human decision-making in simulation models of conflict using experimental gaming
94
Modelling of HVDC transmission systems in the harmonic domain
95
Modelling of HVDC wall bushing flashover due to uneven wetting
96
Modelling of hydrocyclone performance based on spray profile analysis
97
Modelling of hydrodesulfurization catalysts II. Effects of catalyst pore structures on deactivation by metal deposits
98
Modelling of hydrodesulfurization catalysts: II. Effects of catalyst pore structures on deactivation by metal deposits
99
Modelling of hydrodispersive processes in the fissured media by flux limiters schemes (Chalk aquifer, France)
100
Modelling of hydrodynamics and cohesive sediment transport in Tanshui River estuarine system, Taiwan
101
Modelling of hydrodynamics in a type I turbulent bed contactor
102
Modelling of hydrogen and oxygen isotope compositions for local precipitation
103
Modelling of hydrogen diffusion and hydrogen induced cracking in supermartensitic and duplex stainless steels
104
Modelling of hydrogen infrastructure for vehicle refuelling in London
105
Modelling of hydrogen isotope retention in the tungsten divertor of EAST during ELMy H-mode
106
Modelling of hydrogen perm-selective membrane reactors for catalytic methane steam reforming
107
Modelling of hydrogen production in batch cultures of the photosynthetic bacterium Rhodobacter capsulatus
108
Modelling of hydrogen transport through plasma facing materials by use of cellular automaton Original Research Article
109
Modelling of hydrological response to climate change in glacierized Central Asian catchments
110
Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation Original Research Article
111
Modelling of Hysteresis in Vibration Control Systems by means of the Bouc-Wen Model
112
Modelling of hysteresis influence on mass transfer in building materials
113
Modelling of hysteresis using Masing–Bouc-Wen’s framework and search of conditions for the chaotic responses
114
Modelling of icecap glaciation of the northern Rocky Mountains of Montana
115
Modelling of icosahedral viruses
116
Modelling of impact damage and dynamics in fibre-metal laminates – A review
117
Modelling of impact forces and pressures in Lagrangian bird strike analyses
118
Modelling of impervious layers from measurements of the sound reduction index
119
Modelling of impingement phenomena for molten metallic droplets with low to high velocities
120
Modelling of impurity pellet ablation in ASDEX Upgrade (neon) and Wendelstein W7-AS (carbon) by means of a radiative (`killer) pellet code
121
Modelling of income distribution in the European Union with the Fokker–Planck equation
122
Modelling of incremental rock breakage by impact – For use in DEM models
123
Modelling of indoor exposure to nitrogen dioxide in the UK
124
Modelling of in-duct desulfurization reactors
125
Modelling of induction machines with skewed rotor slots
126
Modelling of inductively coupled multi-component plasmas
127
Modelling of inelastic bending of a metal sheet with thermal coupling
128
Modelling of inelastic bending of a metal sheet with thermal coupling
129
Modelling of inelastic bending of a metal sheet with thermal coupling
130
Modelling of inextensible cable dynamics with experiments
131
Modelling of infrared heating of thermoplastic sheet used in thermoforming process
132
Modelling of inherent anisotropy in sedimentary rocks
133
Modelling of initial fatigue crack growth and crack branching under fretting conditions
134
Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–B Original Research Article
135
Modelling of instabilities in turbulent swirling flames
136
Modelling of insurers’ rating determinants. An application of machine learning techniques and statistical models
137
Modelling of integrated effect of volumetric heating and magnetic field on tritium transport in a U-bend flow as applied to HCLL blanket concept
138
Modelling of interacting dimer adsorption
139
Modelling of interaction between a spatula and a human brain
140
Modelling of interactive populations of disperse systems
141
Modelling of interfacial fracture
142
Modelling of interfacial fracture
143
Modelling of interfacial viscoplastic slip coupled to damage in a polycrystalline microstructure
144
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
145
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
146
Modelling of interlaminar fracture processes in composites using interface elements
147
Modelling of inter-laminar toughening from chopped Kevlar fibers
148
Modelling of intermittent drying of thin layer rough rice Original Research Article
149
Modelling of internal environmental conditions in a full-scale commercial pig house containing animals
150
Modelling of internal stress distribution and deformation behaviour in the precipitation hardened superalloy SC16
151
Modelling of internal stress distribution and deformation behaviour in the precipitation hardened superalloy SC16
152
Modelling of interparticle breakage
153
Modelling of inter-rivet buckling of hybrid composites
154
Modelling of interstitials in the bcc phase
155
Modelling of interstitials in the bcc phase
156
Modelling of iodine-induced stress corrosion cracking in CANDU fuel
157
Modelling of ionic polymer–metal composites by a multi-field finite element method
158
Modelling of ionic polymer–metal composites by a multi-field finite element method
159
Modelling of iron cycling and its impact on the electron balance at a petroleum hydrocarbon contaminated site in Hnevice, Czech Republic
160
Modelling of island divertor physics and comparison to W7-AS experimental results
161
Modelling of isobaric stages of adsorption cooling cycle: An optimal shape of adsorption isobar
162
Modelling of isothermal and dynamic pyrolysis of plastics considering non-homogeneous temperature distribution and detailed degradation mechanism
163
Modelling of isothermal coupled moisture–ion transport in cementitious materials
164
Modelling of isotope selective infrared multiphoton dissociation in a wave guide reactor
165
Modelling of jack-up response for fatigue under simulated service conditions
166
Modelling of jute production using artificial neural networks
167
Modelling of kinematics of the IRb-6 manipulator
168
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
169
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
170
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: I: Theory
171
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
172
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
173
Modelling of kinetics in multi-component multi-phase systems with spherical precipitates: II: Numerical solution and application
174
Modelling of kinetics of solidification of intermetallic compounds
175
Modelling of kinetics of solidification of intermetallic compounds
176
Modelling of knee joint muscles during the swing phase of gait––a forward dynamics approach using MATLAB/Simulink
177
Modelling of lake mixing induced by air-bubble plumes and the effects on evaporation
178
Modelling of laminar premixed flames by BEM using; different fundamental solutions
179
Modelling of laminated microstructures in stress-induced martensitic transformations
180
Modelling of laminates using a layerwise element with enhanced strains
181
Modelling of land cover and agricultural change in Europe: Combining the CLUE and CAPRI-Spat approaches
182
Modelling of landscape changes derived from the dynamics of socio-ecological systems: A case of study in a semiarid Mediterranean landscape
183
Modelling of lane-changing behaviour integrating with merging effect before a city road bottleneck
184
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
185
Modelling of laser forming – An review
186
Modelling of laser produced plasma and time-of-flight experiments in UV laser ablation of aluminium targets
187
Modelling of laser produced plasma and time-of-flight experiments in UV laser ablation of aluminium targets
188
Modelling of laser welding process in the phase of keyhole formation
189
Modelling of laser-material interaction using semi-analytical approach Original Research Article
190
Modelling of layer epitaxial growth: surface morphology and growth mode transitions
191
Modelling of leaching in pure cement paste and mortar
192
Modelling of leaching of chloride and nitrogen species in an experimental citrus grove
193
Modelling of leaching of chloride and nitrogen species in an experimental citrus grove
194
Modelling of length scale effects in viscoelastic materials
195
Modelling of light pollution in suburban areas using remotely sensed imagery and GIS
196
Modelling of Light-driven RuBP Regeneration, Carboxylation and CO2Diffusion for Leaf Photosynthesis
197
Modelling of linear wave propagation in spatial fluid filled pipe systems consisting of elastic curved and straight elements
198
Modelling of liquid circulation velocity in concentric-tube airlift reactors
199
Modelling of liquid crystalline compound fibres
200
Modelling of liquid sloshing with constrained floating baffle
201
Modelling of liquid–liquid equilibria of mixed solvent electrolyte systems using the extended electrolyte NRTL
202
Modelling of liquid-phase oxidation of SO2: lognormal approach and model comparison
203
Modelling of load interaction and overload effect on fatigue damage of steel bridges
204
Modelling of local conditions in flooded lead/acid batteries in photovoltaic systems
205
Modelling of local effects by hybrid-displacement FE
206
Modelling of local two-phase flow parameters in upward subcooled flow boiling at low pressure
207
Modelling of localisation and scale effect in thick-walled cylinders with gradient elastoplasticity
208
Modelling of localization and propagation of phase transformation in superelastic SMA by a gradient nonlocal approach
209
Modelling of location- and time-dependent deformation of chondrocytes during cartilage loading
210
Modelling of long term kinetic evolution: a fruitful relationship between experiment and theoretical development
211
Modelling of long term nitrogen retention in surface waters
212
Modelling of Long Wavelength Detection of Objects Using Elman Network Modified Covariance Combination
213
Modelling of long-term behaviour of caesium and strontium radionuclides in the Arctic environment and human exposure
214
Modelling of long-term diffusion–reaction in a bentonite barrier for radioactive waste confinement
215
Modelling of long-term dynamic leaching tests applied to solidified/stabilised waste
216
Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity
217
Modelling of low-energy galactic electrons in the heliosheath Original Research Article
218
Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins
219
Modelling of machinability parameters of carbon–carbon composite—a response surface approach
220
Modelling of macropore flow and transport processes at catchment scale
221
Modelling of macroscopic magnetic islands in tokamaks
222
Modelling of magnetic field measurements at Mercury
223
Modelling of magnetic field near the magnetopause
224
Modelling of magneto-chiral enantioselective photochemistry Original Research Article
225
Modelling of magnetodensimetric separation in two high gradient magnetic separation axial cells
226
Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine
227
Modelling of man-made contribution to salinity increase into the Vistula Lagoon (Baltic Sea)
228
Modelling of man-made contribution to salinity increase into the Vistula Lagoon (Baltic Sea)
229
Modelling of mantled porphyroclasts using non-Newtonian rock analogue materials
230
Modelling of Manufacturing Systems Complexity
231
Modelling of manure production by pigs and NH3, N2O and CH4 emissions. Part I: animal excretion and enteric CH4, effect of feeding and performance
232
Modelling of manure production by pigs and NH3, N2O and CH4 emissions. Part II: effect of animal housing, manure storage and treatment practices
233
Modelling of marine currents in Cuban waters: A case study
234
Modelling of masonry infill walls participation in the seismic behaviour of RC buildings using OpenSees
235
Modelling of mass loss of char particles during combustion in flow of inert material
236
Modelling of mass transfer during osmotic dehydration of apples Original Research Article
237
Modelling of mass transfer from multiple emulsions
238
Modelling of mass transfer in facilitated supported liquid membrane transport of copper(II) using MOC-55 TD in Iberfluid
239
Modelling of mass transfer in film flow of shear thinning liquid on a horizontal rotating disk
240
Modelling of mass transfer of volatile organic compounds in polymer dispersions
241
Modelling of material handling operations using controlled traffic
242
Modelling of Material Side Flow in Hard Turning
243
Modelling of materials properties and behaviour critical to casting simulation
244
Modelling of maximum daily water temperatures in a small stream using air temperatures
245
Modelling of maximum temperatures in aerial bundled cables feeding domestic loads using the beta probability distribution function
246
Modelling of Mean Drop Size in a Extraction Spray Column and Developing a New Model
247
Modelling of mechanical system by means of matroids
248
Modelling of mechanical systems vibrations by utilisation of GRAFSIM software
249
Modelling of Mechanical Systems, Vol. 2: Structural Elements, François Axisa, Philippe Trompette. Elsevier Butterworth-Heinemann, Oxford (2005)
250
Modelling of Mediterranean system-changes under climate variations and human impact
251
Modelling of membrane filtration of natural water for potable purposes Original Research Article
252
Modelling of membrane fouling in a submerged membrane bioreactor
253
Modelling of mercury emissions from background soils
254
Modelling of mercury geochemical cycle in Lake Velenje, Slovenia
255
Modelling of mercury transport and transformation processes in the Idrijca and Socˇa river system
256
Modelling of mercury transport and transformations in the water compartment of the Mediterranean Sea
257
Modelling of metal deposition
258
Modelling of metal flow and oxidation during furnace emptying using smoothed particle hydrodynamics
259
Modelling of metal pollutant leaching through a smectite
260
Modelling of metal-binder migration during liquid-phase sintering of graded cemented carbides
261
Modelling of metal–insulator–semiconductor devices featuring a silicon quantum well
262
Modelling of meteorological conditions at an urban scale for the PUMA winter campaign
263
MODELLING OF METEOROLOGICAL PARAMETERS FOR THE PURPOSE OF SIZING OF THE SOLAR PHOTOVOLTAIC IRRIGATION SYSTEMS
264
Modelling of Methylene Blue Adsorption via Activated Carbon Derived from Indigenous Agricultural Solid Waste
265
Modelling of MHS cellular solid in large strains
266
Modelling of MHS cellular solid in large strains
267
Modelling of microbial activity and prediction of shelf life for packed fresh fish
268
Modelling of microbial degradation of pesticides in soils
269
Modelling of microbial metabolism stoichiometry: Application in bioleaching processes
270
Modelling of microcracks initiation and evolution along interfaces of the WC/Co composite by the finite element method
271
Modelling of microhabitat used by fish in natural and regulated flows in the river Garonne (France)
272
Modelling of microhabitat used by fish in natural and regulated flows in the river Garonne (France)
273
Modelling of micropollutant removal in biological wastewater treatments: A review Review Article
274
Modelling of microsegregation and homogenization of 6061 extrudable Al-alloy
275
Modelling of microsegregation in ternary alloys: Application to the solidification of Al–Mg–Si Original Research Article
276
Modelling of microstructural effects in the fatigue of austempered ductile iron
277
Modelling of microstructural effects in the fatigue of austempered ductile iron
278
Modelling of microstructural evolution in multipass hot rolling
279
Modelling of microstructural evolution in thermomechanical processing of structural steels
280
Modelling of microstructural evolution in thermomechanical processing of structural steels
281
Modelling of microstructure and mechanical properties of steel using the artificial neural network
282
Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas
283
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
284
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
285
Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model
286
Modelling of microstructure evolution in hot forming using unified constitutive equations
287
Modelling of microstructure evolution in peritectic systems
288
Modelling of microstructure formation and interface dynamics
289
Modelling of microwave heating of foodstuff: study on the influence of sample dimensions with a FEM approach Original Research Article
290
Modelling of migration and fate of selected persistent organic pollutants in the Gulf of Gdansk and the Vistula catchment (Poland): selected results from the EU ELOISE EuroCat project
291
Modelling of mixed mode debonding in externally FRP reinforced beams
292
Modelling of mode-I stable crack growth under hydrogen assisted stress corrosion cracking
293
Modelling of modern mercury vapor transport in an ancient hydrothermal system: environmental and geochemical implications
294
Modelling of moisture and thermal transient behaviour of multi-layer non-cavity walls
295
Modelling of moisture diffusion in multilayer woven fabric composites
296
Modelling of moisture diffusion in pores of banana foam mat using a 2-D stochastic pore network: Determination of moisture diffusion coefficient during adsorption process Original Research Article
297
Modelling of moisture-dependent aerobic degradation of solid waste
298
Modelling of molecular light scattering
299
Modelling of morphology evolution and macroscopic behaviour of intercalated PET–clay nanocomposites during semi-solid state processing
300
Modelling of Motion Resistance Ratios of Pneumatic and Rigid Bicycle Wheels
301
Modelling of MPEG-4 encoded VBR video traffic
302
Modelling of Multi-Agent Systems: Experiences with Membrane Computing and Future Challenges
303
Modelling of multi-component gas flows in capillaries and porous solids
304
Modelling of multi-component immunoassay kinetics — A new node-based method for simulation of complex assays Original Research Article
305
Modelling of multicomponent olefins solubility in polyolefins using Sanchez–Lacombe equation of state
306
Modelling of multicomponent salt systems : Application to sea water and brines I. Derivation of the model
307
Modelling of multicomponent salt systems: Application to sea water and brines I. Derivation of the model
308
Modelling of multifrequency IRMPD for laser isotope separation
309
Modelling of multimachine transients during unbalanced power system disturbances
310
Modelling of multi-nutrient interactions in growth of the dinoflagellate microalga Protoceratium reticulatum using artificial neural networks
311
Modelling of multiple crack-branching from Mode-I crack-tip in isotropic solids
312
Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP)
313
Modelling of multiple intra-time step collisions in the hard-sphere discrete element method
314
Modelling of multiple sclerosis: lessons learned in a non-human primate
315
Modelling of multiple short-length-scale stall cells in an axial compressor using evolved GMDH neural networks
316
Modelling of multiple system atrophy in mice
317
Modelling of multiple-mechanism agglomeration in a crystallization process
318
Modelling of muscle behaviour by the finite element method using Hillʹs three-element model
319
Modelling of nano-filler reinforcement, filler strength and experimental results of nanosilica composites made by a precipitation method
320
Modelling of nanofiltration in softening water Original Research Article
321
Modelling of nanoscale ferroelectrics from atomistic simulations
322
Modelling of natural and synthetic polyelectrolyte interactions in natural waters by using SIT, Pitzer and Ion Pairing approaches
323
Modelling of natural convective heat transfer at an internal surface
324
Modelling of natural fermentation in cowpeas using response surface methodology Original Research Article
325
Modelling of negative bias column for coarse particles flotation
326
Modelling of neuronal circuits: the future is bright
327
Modelling of Neutral to Earth Voltage (NTEV) using RLC Grounding System and Current Injection Method
328
Modelling of n-hexadecane hydroisomerization and hydrocracking reactions on a Mo/Hβ-alumina Bi-functional catalyst, using the single event concept
329
Modelling of nicotine diffusion from mainstream tobacco smoke within denuder tubes
330
Modelling of Nitrate Leaching on a Regional Scale Using a GIS
331
Modelling of nitrogen leaching from experimental onion field under drip fertigation
332
Modelling of nitrogen leaching under a complex winter wheat and red clover crop rotation in a drained agricultural field
333
Modelling of nitrogen release from MBT waste
334
Modelling of nitrogen turnover and leaching in Saxony
335
Modelling of NO and N2O emissions from biomass-fired circulating fluidized bed combustors
336
Modelling of NO formation in the combustion of coal blends
337
Modelling of non-catalytic biodiesel synthesis under sub and supercritical conditions: The influence of phase distribution
338
Modelling of non-consolidated oil shale semi-coke forward combustion: Influence of carbon and calcium carbonate contents
339
Modelling of nonconvex nonsmooth energy problems. Dynamic hemivariational inequalities with impact effects
340
Modelling of non-isothermal transformations in alloys containing a particle distribution Original Research Article
341
Modelling of non-laminar phenomena in high reliability hydrostatic seals operating in extreme conditions
342
Modelling of nonlinear damage on elastic brittle materials
343
Modelling of nonlinear modal interactions in the transient dynamics of an elastic rod with an essentially nonlinear attachment
344
Modelling of non-premixed swirl burner flows using a Reynolds-stress turbulence closure
345
Modelling of nonreactive tracer dipole tests in a shear zone at the Grimsel test site
346
Modelling of non-uniform current diffusion coupled with thermohydraulic effects in superconducting cables Original Research Article
347
Modelling of NonUniform Piezoelectric MicroCantilever in Different Environments
348
Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
349
Modelling of novel two section laser applications
350
Modelling of NOx emission factors from heavy and light-duty vehicles equipped with advanced aftertreatment systems
351
Modelling of nucleation and void growth in dynamic pressure loading, application to spall test on tantalum
352
Modelling of nutrient partitioning in growing pigs to predict their anatomical body composition. 1. Model description
353
Modelling of nutrient partitioning in growing pigs to predict their anatomical body composition. 2. Model evaluation
354
Modelling of observed double-junction effect
355
Modelling of observed double-junction effect
356
Modelling of odour dispersion around a pig farm building complex using AERMOD and CALPUFF. Comparison with wind tunnel results
357
Modelling of olive cake thin-layer drying process Original Research Article
358
Modelling of operator heuristics in dispatch for security enhancement
359
Modelling of optical durability of enhanced aluminum solar reflectors
360
Modelling of Optical Interaction in MOSFET for L Band Application
361
Modelling of optical interference effects in conjugated polymer films and devices
362
Modelling of optically active electromagnetic media Original Research Article
363
Modelling of optimal specification regions
364
Modelling of Optimal Unified Power Flow Controller (OUPFC) for optimal steady-state performance of power systems
365
Modelling of optimized shear scenarios with LHCD for high performance experiments on JET
366
Modelling of optimized shear scenarios with LHCD for high performance experiments on JET
367
Modelling of organic magnetoresistance as a function of temperature using the triplet polaron interaction
368
Modelling of organic matter degradation in constructed wetlands for treatment of combined sewer overflow
369
Modelling of organic nanograting heterojunctions for photoelectric conversion
370
Modelling of organic-solvent flux through a polyimide membrane
371
Modelling of orographic precipitation over Iberia: a springtime case study
372
Modelling of oversized material flow through a horizontal hydrotransport slurry pipe to optimize its acoustic detection
373
Modelling of oxide scale surface roughness in hot metal forming
374
Modelling of oxide surfaces
375
Modelling of oxygen and nitrogen cycling as a function of macrophyte community in the Thau lagoon
376
Modelling of ozone concentrations using a Takagi-Sugeno model
377
Modelling of packed bed membrane reactors for autothermal production of ultrapure hydrogen
378
Modelling of palm oil production using fuzzy expert system
379
Modelling of paralytic shellfish toxin biotransformations in the course of Crassostrea gigas detoxification kinetics
380
Modelling of paralytic shellfish toxin biotransformations in the course of Crassostrea gigas detoxification kinetics
381
Modelling of parameters for optimization of maturity in composting trimming residues
382
Modelling of parboiled rice in superheated-steam fluidized bed Original Research Article
383
Modelling of partial discharge development in electrical tree channels
384
Modelling of partially-resolved oceanic symmetric instability
385
Modelling of particle beams
386
Modelling of particle breakage during drying
387
MODELLING OF PARTICLE FORMATION FROM NO3 OXIDATION OF SELECTED MONOTERPENES
388
Modelling of particle nucleation and growth in binary alloys under elastic deformation: An application to a Cu–0.95 wt%Co alloy
389
Modelling of particle stratification in jigs by the discrete element method
390
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
391
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
392
Modelling of particle strengthening in the γ’ and oxide dispersion strengthened nickel-base superalloy PM3030
393
Modelling of particulate matter mass emissions from a light-duty diesel vehicle
394
Modelling of paste flows subject to liquid phase migration
395
Modelling of Pb–(TAPS)x–(OH)y system and refinement of stability constants in the region of lead hydrolysis and lead hydroxide precipitation
396
Modelling of PCB transients with boundary elements/method of moments in the frequency domain
397
Modelling of PCDD/F release from MSW bio-drying Original Research Article
398
Modelling of peak-flow wall shear stress in major airways of the lung
399
Modelling of penetration of ions through a shutter grid in ion mobility spectrometers
400
Modelling of pepsin digestibility of myofibrillar proteins and of variations due to heating
401
Modelling of perfectly and weakly bonded laminated plates and shallow shells
402
Modelling of permafrost freezing and melting and the impact of a climatic cycle on groundwater flow at the Meuse/Haute-Marne site
403
Modelling of permeability loss in membrane filtration: Re-examination of fundamental fouling equations and their link to critical flux Original Research Article
404
Modelling of permeability of textile reinforcements: lattice Boltzmann method
405
Modelling of pH and inorganic aluminium after termination of liming in 3000 Swedish lakes
406
Modelling of pH dependent n-octanol/water partition coefficients of ionizable pharmaceuticals
407
Modelling of pharmaceutical residues in Australian sewage by quantities of use and fugacity calculations
408
Modelling of phase diagrams and thermodynamic properties using Calphad method – Development of thermodynamic databases
409
Modelling of phase equilibria in MCrAlY coating systems
410
Modelling of phase equilibria of glycol ethers mixtures using an association model
411
Modelling of phase separation in liquids with a miscibility gap
412
Modelling of phase transformation kinetics in Ti alloys - Isothermal treatments
413
Modelling of phase transformation kinetics in Ti alloys – Isothermal treatments Original Research Article
414
Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)
415
Modelling of phase-grating based wideband tuneable lasers with simplified quasi-digital wavelength selection
416
Modelling of phenolic resin polymerisation
417
Modelling of Phospholipid Translocation in the Erythrocyte Membrane: A Combined Kinetic and Thermodynamic Approach
418
Modelling of phosphorus and suspended solids in Cootes Paradise marsh
419
Modelling of phosphorus and suspended solids in Cootes Paradise marsh
420
MODELLING OF PHOSPHORUS PRECIPITATION IN WASTEWATER TREATMENT PLANTS WITH ENHANCED BIOLOGICAL PHOSPHORUS REMOVAL
421
MODELLING OF PHOSPHORUS PRECIPITATION IN WASTEWATER TREATMENT PLANTS WITH ENHANCED BIOLOGICAL PHOSPHORUS REMOVAL
422
Modelling of phosphorus removal from aqueous and wastewater samples using ferric iron
423
Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films
424
Modelling of photo-induced changes in chalcogenide glasses: a-Se and a-AsSe Original Research Article
425
Modelling of physical ageing in starch using the TNM equation Original Research Article
426
Modelling of physical and reactive processes during biodegradation of a hydrocarbon plume under transient groundwater flow conditions
427
Modelling of piezolaminated plates using layerwise mixed finite elements
428
Modelling of plane composite frames in unpropped construction
429
Modelling of plane strain compression (PSC) test for aluminium alloys using finite elements ، fuzzy logic
430
Modelling of plane strain interfacial fracture in incompressible materials
431
Modelling of plasma activated CVD of Co–C–O layers in parallel plate reactor
432
Modelling of plasma and impurity behaviour in a tokamak with a stochastic layer1
433
Modelling of plasma particle interactions and coating growth for plasma spraying of hydroxyapatite
434
Modelling of plasma–particle two-phase flow using statistical techniques
435
Modelling of plastic anisotropy in heat-treated aluminium extrusions
436
Modelling of plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law
437
Modelling of plowing and shear friction coefficients during high-temperature ball-on-disc tests
438
Modelling of PM10 concentrations over Milano urban area using two aerosol modules
439
Modelling of pneumatic tractor tyre interaction with multi-layered soil
440
Modelling of point and non-point nutrient loadings from a watershed
441
Modelling of point defects in anisotropic media with an application to ferroelectrics
442
Modelling of pollutant behaviour in estuaries: Application to cadmium in the Loire estuary
443
Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding
444
Modelling of polysulfone membrane formation by immersion precipitation Original Research Article
445
Modelling of porous silicon formation process
446
Modelling of porphyroclasts in simple shear and the role of stress variations at grain boundaries
447
Modelling of possible mud volcanism on Titan
448
Modelling of potassium exchange in a natural, polyionic montmorillonite under hydrothermal conditions
449
Modelling of powder compaction process using an endochronic plasticity model
450
Modelling of power and energy requirements for tillage implements operating in Serdang sandy clay loam, Malaysia
451
Modelling of power law liquid–solid mass transfer in packed beds at Darcy regime
452
Modelling of power plant dynamics and uncertainties for robust control synthesis
453
Modelling of Precast Concrete Composite Slab Using Finite and Interface Elements
454
Modelling of precision hard cutting using implicit finite element methods
455
Modelling of pressure strain correlation in compressible turbulent flow
456
Modelling of pricing and market impacts for water options
457
Modelling of primary alkaline battery cathodes: A simplified model
458
Modelling of primary bcc-Fe crystal growth in a Fe85B15 amorphous alloy
459
Modelling of primary bcc-Fe crystal growth in a Fe85B15 amorphous alloy Original Research Article
460
Modelling of probability liquefaction based on standard penetration tests using the jointly distributed random variables method
461
Modelling of process parameters on the working of P/M copper preforms
462
Modelling of processes in fractured rock using FEM/FVM on multidimensional domains
463
Modelling of Progressive and Instantaneous Failures of Foliated Rock Slopes
464
Modelling of progressive interface failure under combined normal compression and shear stress
465
Modelling of progressive short waves using wave envelopes
466
Modelling of properties and distribution of steel fibres within a fine aggregate concrete
467
Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations
468
Modelling of PT326 Hot Air Blower Trainer Kit Using PRBS Signal and Cross-Correlation Technique
469
Modelling of pulsatile blood flow in arterial trees of retinal vasculature
470
Modelling of pulverized coal boilers: review and validation of on-line simulation techniques
471
Modelling of pumped-storage generation in sequential Monte Carlo production simulation
472
Modelling of pyrolysis and combustion of gluten–glycerol-based bioplastics
473
Modelling of pyrolysis of coal–biomass blends using thermogravimetric analysis
474
Modelling of pyrolysis of large wood particles
475
Modelling of pyrolytic laser-induced deposition
476
Modelling of Quality in Service with Used Structural Equation Model (PLS): A Case Study of Urban Parks in Shiraz
477
Modelling of quasi-brittle behaviour: a discrete approach coupling anisotropic damage growth and frictional sliding
478
Modelling of quasi-periodic oscillations with wave packets
479
Modelling of radiation impact on ITER Beryllium wall
480
Modelling of radiation quantities and photolysis frequencies in the aqueous phase in the troposphere
481
Modelling of radiation transfer in metallic powders at laser treatment
482
Modelling of radiative PAR transfer in a tunnel greenhouse Original Research Article
483
Modelling of radioactive material release from waste packages in case of a fire event
484
Modelling of radiocesium in lakes — the VAMP model
485
Modelling of radiocesium in lakes—Lake sensitivity and remedial strategies
486
Modelling of radon concentration peaks in thermal spas: Application to Polichnitos and Eftalou spas (Lesvos Island—Greece)
487
Modelling of rain splash trajectories and prediction of rain splash height
488
Modelling of Random Geometrical Imperfections and Reliability Calculations for Thin Cylindrical Shell Subjected to Lateral Pressure
489
Modelling of random variation of three-phase voltage unbalance in electric distribution systems using the trivariate Gaussian distribution
490
Modelling of rare plant species richness by landscape variables in an agriculture area in Finland
491
Modelling of R-curve behaviour in ceramic–metal laminates
492
Modelling of R-curve behaviour in ceramic–metal laminates
493
Modelling of reaction_diffusion processes: the theory of catalytic electrode processes at hemispheroidal ultramicroelectrodes
494
Modelling of reactive separation processes: reactive absorption and reactive distillation
495
Modelling of reactive separations including fast chemical reactions in CSTR
496
Modelling of reactive stripping in monolith reactors
497
Modelling of recharge and pollutant fluxes to urban groundwaters
498
Modelling of reciprocating and scroll compressors
499
Modelling of recombination velocity and doping influence in epitaxial silicon solar cells
500
MODELLING OF RECONFIGURABLE TERAHERTZ INTEGRATED ARCHITECTURE (RETINA) SIW STRUCTURES
501
Modelling of recrystallisation in mechanically alloyed materials
502
Modelling of recrystallisation in mechanically alloyed materials
503
Modelling of recrystallisation textures in aluminium alloys: I. Model set-up and integration Original Research Article
504
Modelling of recrystallisation textures in aluminium alloys: II. Model performance and experimental validation Original Research Article
505
Modelling of recrystallization textures
506
Modelling of rectangular RC columns strengthened with FRP
507
Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration
508
Modelling of reinforced polymer composites subject to thermo-mechanical loading
509
Modelling of Relationship Between Service Quality, Environmental Impact, Attitude and Intention to Use Park-and-Ride
510
Modelling of relief of phase reflection diffraction grating
511
Modelling of residual stress profiles in plasma nitrided tool steel
512
Modelling of Residual Stress Relaxation: A Review
513
Modelling of residual stresses in the shot peened material C-1020 by artificial neural network
514
Modelling of Resonance Frequency of MEMS Corrugated Diaphragm for Capacitive Acoustic Sensors
515
Modelling of resonant switched-mode converters using SIMULINK
516
Modelling of retention in analytical supercritical fluid chromatography for CO2—Methanol mobile phase
517
Modelling of retention of pesticides in reversed-phase high-performance liquid chromatography: Quantitative structure-retention relationships based on solute quantum-chemical descriptors and experimental (solvatochromic and spin-probe) mobile phase descri
518
Modelling of rheological behaviour of pummelo juice concentrates using master-curve Original Research Article
519
Modelling of rheological behaviour of soursop juice concentrates using shear rate–temperature–concentration superposition Original Research Article
520
Modelling of rigid objects by bidimensional moments. Applications to the estimation of 3D rotations
521
Modelling of rock alteration due to coupled heat and mass transport
522
Modelling of rollers in calculation of slewing bearing with the use of finite elements
523
Modelling of root ABA synthesis, stomatal conductance, transpiration and potato production under water saving irrigation regimes
524
Modelling of Root Growth and Bending in Two Dimensions
525
Modelling of runoff behaviour of particle-bound polycyclic aromatic hydrocarbons (PAHs) from roads and roofs
526
Modelling of rupture planes for peak ground accelerations and its application to the isoseismal map of MMI scale in Indian region
527
Modelling of safety glass for crash simulation
528
Modelling of safety management systems
529
Modelling of salt crystallization in building materials with microstructure – Poromechanical approach
530
Modelling of SAW filter based on ZnOrdiamondrSi layered structure including velocity dispersion
531
Modelling of Scenedesmus obliquus; function of nutrients with modified Gompertz model
532
Modelling of seasonal exchange flows through the Dardanelles Strait
533
Modelling of sediment suspensions in oscillating grid turbulence
534
Modelling of sediment transport and bed deformation in rivers with continuous bends
535
Modelling of Sediment Transport in Beris Fishery Port
536
Modelling of segment structures: Boudins, bone-boudins, mullions and related single- and multiphase deformation features
537
Modelling of seismic energy transport at volcanoes with real topography and complex propagation medium
538
Modelling of Seismic Ground Motion in Santiago de Cuba City from Earthquakes in Oriente Fault Seismic Zone
539
Modelling of selectivity data obtained from microactivity testing of FCC catalysts Original Research Article
540
Modelling of self-protected light-triggered thyristors
541
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the current–voltage characteristics
542
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the current–voltage characteristics
543
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the internal field
544
Modelling of semi-conductor diodes made of high defect concentration, irradiated, high resistivity and semi-insulating material: the internal field
545
Modelling of semiconductor laser amplifier for the terahertz optical asymmetric demultiplexer
546
Modelling of sequencing batch reactors
547
Modelling of sequential groundwater treatment with zero valent iron and granular activated carbon
548
Modelling of sewerage systems strengthened with composites plates
549
Modelling of shape anvils in free hot forging of long products
550
Modelling of shear rate distribution in two planetary mixtures for studying development of cake batter structure Original Research Article
551
Modelling of short crack propagation – Transition from stage I to stage II
552
Modelling of short wave diffraction problems using approximating systems of plane waves
553
Modelling of SiC sublimation growth process: analyses of macrodefects formation
554
Modelling of SiC sublimation growth process: analyses of macrodefects formation
555
Modelling of silica diffusion experiments with 32Si in Boom Clay
556
Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant
557
Modelling of simulated clay precipitation within reservoir sandstones
558
Modelling of simultaneous estimating the laser heat flux and melted depth during laser processing by inverse methodology
559
Modelling of Singaporeʹs topographic transformation based on DEMs
560
Modelling of Single and Binary Adsorptions of Heavy Metals Onto Activated Carbon - Equilibrium Studies
561
Modelling of single gas permeation in real MFI membranes
562
Modelling of single-phase flow for horizontal wells in a stratified medium
563
Modelling of single-phase nonuniform transmission lines in electromagnetic transient simulations
564
Modelling of sinkage tests in tilled soils for mobility study
565
Modelling of size effects in microforming process with consideration of grained heterogeneity
566
Modelling of size effects on strengthening of multiphase Al based composites
567
Modelling of slaked lime–metakaolin mortar engineering characteristics in terms of process variables
568
Modelling of sliding friction for carbon black and silica filled elastomers on road tracks
569
Modelling of sloshing modulated angular momentum fluctuations actuated by gravity gradient associated with spacecraft slew motion
570
Modelling of slurry droplet drying
571
Modelling of SMA materials: Training and two way memory effects
572
Modelling of small secondary energy storage units in long-term planning
573
Modelling of snowmelt erosion and sediment yield in a small low-mountain catchment in Germany
574
Modelling of SO2 pollution changes with fuel shifting in Gebze, Turkey
575
Modelling of SO2 pollution changes with improving thermal performance of buildings in Gebze, Turkey
576
Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions
577
Modelling of soft tissue deformation for laparoscopic surgery simulation
578
Modelling of Soil Displacement Resulting from Sweep during Tillage Operation Using Image Processing
579
MODELLING OF SOIL EROSION PROCESSES AND RUNOFF FOR SUSTAINABLE WATERSHED MANAGEMENT: CASE STUDY OUED EL ABID WATERSHED, MOROCCO
580
Modelling of soil nitrogen dynamics within the decision support system DANUBIA
581
Modelling of soil nitrogen dynamics within the decision support system DANUBIA
582
Modelling of soil nitrogen forms after organic amendments under controlled conditions
583
Modelling of soil nitrogen forms after organic amendments under controlled conditions
584
Modelling of soil nutrient budgets: an assessment of agricultural sustainability in Nepal
585
Modelling of soil vibrations from railway tunnels
586
Modelling of soil–seed contact using the Discrete Element Method (DEM)
587
Modelling of SOL transport and radiation losses for ITER with the integrated tokamak code TOKES
588
Modelling of solar adsorption refrigeration system in Nasiriya City
589
Modelling of solar cell degradation in space
590
Modelling of solar cells with down-conversion of high energy photons, anti-reflection coatings and light trapping
591
Modelling of solar energy potential in Nigeria using an artificial neural network model
592
Modelling of solar radiation influenced by topographic shading––evaluation and application for precision farming
593
Modelling of solar/diesel/battery hybrid power systems for far-north Cameroon
594
Modelling of solid flow effect on pressure drop in a vertical gas well
595
Modelling of solid fuel stoves
596
Modelling of solid particle aggregation dynamics in non-wetting liquid medium
597
Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys Original Research Article
598
Modelling of solidification for copper-base alloys during rapid solidification processing
599
Modelling of solidification for copper-base alloys during rapid solidification processing
600
Modelling of solidification of Ti-45 at%Al alloy ingot by the stochastic model
601
Modelling of solid-phase tea waste extraction for the removal of manganese from food samples by using artificial neural network approach
602
Modelling of solid-state, dissolution and solution-phase reactions at adhered solid–electrode–solvent (electrolyte) interfaces: electrochemistry of microcrystals of C60 adhered to an electrode in contact with dichloromethane (Bu4NClO4)
603
Modelling of solute and solvent transport through nanofiltration membranes Original Research Article
604
Modelling of solute and water transport in semi-permeable clay membranes: comparison with experiments
605
Modelling of Solute Aqueous Extraction from Carrots subjected to a Pulsed Electric Field Pre-treatment
606
Modelling of solute retention in the reversed-phase high-performance liquid chromatography system with the chemically bonded 3-cyanopropyl stationary phase
607
Modelling of solute transport in non-aqueous nanofiltration
608
Modelling of some dwelling internal microclimates
609
Modelling of some mechanical malfunctions of the human basilar membrane
610
Modelling of some soil physical quality indicators using hybrid algorithm principal component analysis - artificial neural network
611
Modelling of soot formation in a heavy-duty diesel engine with conditional moment closure
612
Modelling of soot oxidation by in various types of diesel particulate filters
613
Modelling of sound fields in enclosed spaces with absorbent room surfaces Part II. Absorptive panels
614
Modelling of sound fields in enclosed spaces with absorbent room surfaces Part III. Barriers
615
Modelling of sound propagation in a non-uniform lined duct using a Multi-Modal Propagation Method
616
Modelling of sound propagation to three-dimensional urban courtyards using the extended fourier PSTD method
617
Modelling of soybean seed drying in concurrent sliding bed dryers: Effect of the number of stages on the seed quality and drying performance
618
Modelling of space weather effects on pipelines
619
Modelling of space weather effects on satellite drag Original Research Article
620
Modelling of spall formation in a plate made of austempered ductile iron having a subsurface-edge crack
621
Modelling of spatial point processes derived from a sequence of auto-Poisson lattice schemes
622
Modelling of spatial variations in vibration analysis with application to an automotive windshield
623
Modelling of spatio-temporal population dynamics of earthworms under wetland conditions—An integrated approach
624
Modelling of spatio-temporal population dynamics of earthworms under wetland conditions—An integrated approach
625
Modelling of species in hood fires by conditional moment closure
626
Modelling of Specific Moisture Extraction Rate and Leakage Ratio in a Condensing Tumble Dryer
627
Modelling of splitting and delamination in notched cross-ply laminates
628
Modelling of spontaneous adhesion phenomena in micro-electro-mechanical systems
629
Modelling of Sprayer Boom Dynamics by Means of Maximum Likelihood Identification Techniques, Part 1: A Comparison of Input-output and Output-only Modal Testing
630
Modelling of Sprayer Boom Dynamics by Means of Maximum Likelihood Identification Techniques, Part 2: Sensitivity-based Mode Shape Normalisation
631
Modelling of sprays in containment applications with A CMFD code Original Research Article
632
Modelling of springback in creep forming thick aluminum sheets
633
Modelling of sputtering yield amplification effect in reactive deposition of oxides
634
Modelling of sputtering yield amplification in serial reactive magnetron co-sputtering
635
Modelling of squeal noise attenuation of ring damped wheels
636
Modelling of stable isotope fractionation by methane oxidation and diffusion in landfill cover soils
637
Modelling of stalling motors during voltage stability studies
638
Modelling of Staphylococcus Aureus under the Effect of Carum Copticum Essential Oil, pH, Temperature, and Inoculum Level
639
Modelling of static friction in rubber–metal contact
640
Modelling of static recrystallisation by combining FEM with empirical models
641
Modelling of stationary and growing cracks in FE framework without remeshing: a state-of-the-art review Review Article
642
Modelling of steady state erosion of CFC actively water-cooled mock-up for the ITER divertor
643
Modelling of steam fired double effect vapour absorption chiller using neural network
644
Modelling of steel fiber-reinforced concrete under multi-axial loads
645
Modelling of steel lattice tower angle legs reinforced for increased load capacity
646
Modelling of stem biomass accumulation in Pinus densiflora seedlings exposed to aqueous-phase OH radicals generating mist
647
Modelling of stem biomass accumulation in Pinus densiflora seedlings exposed to aqueous-phase OH radicals generating mist
648
Modelling of stimulus response experiments in the feed channel of spiralwound reverse osmosis membranes
649
Modelling of stomatal conductance and ozone flux of Norway spruce: comparison with field data
650
Modelling of stomatal density response to atmospheric
651
Modelling of strain hardening and its relation to the onset of Portevin-Le Chatelier effect in Al-Mg alloys
652
Modelling of strain hardening and its relation to the onset of Portevin-Le Chatelier effect in Al-Mg alloys
653
Modelling of strain hardening and microstructural evolution in equal channel angular extrusion
654
Modelling of strain rate effects on matrix dominated elastic and failure properties of unidirectional fibre-reinforced polymer–matrix composites
655
Modelling of strained ZnSSe on relaxed ZnSSe-based structures for blue light emission
656
Modelling of stratified gas–liquid two-phase flow in horizontal circular pipes
657
Modelling of stress due to shrinkage during drying of spaghetti Original Research Article
658
Modelling of stress softening in elastomeric materials: foundations of simple theories
659
Modelling of stresses evolution in growing thermal oxides on metals. A methodology to identify the corresponding mechanical parameters
660
Modelling of stretched natural gas diffusion flames
661
Modelling of strong coupling regime in bulk GaN microcavities using transfer matrix and quasiparticle formalisms
662
Modelling of strong wind flows over complex terrain at small geometric scales
663
Modelling of structural and physicomechanical properties of poly-paraphenylene using molecular orbital and molecular mechanical methods
664
Modelling of structure changes in TRIP type steel during hot deformation
665
Modelling of structure geometry in Bridge Management Systems
666
Modelling of Student Readiness Switch to Cycling Modes at UKM
667
Modelling of stylolite geometries and stress scaling
668
Modelling of subgrid-scale fluxes
669
Modelling of submerged membrane bioreactor: Conceptual study about link between activated slugde biokinetics, aeration and fouling process
670
Modelling of sub-micrometer particle concentrations in free-flowing freeway traffic, Brisbane, Australia: some empirical results
671
Modelling of sub-micron-sized particle deposition in a laminar wall jet—an investigation of the role of shielding
672
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology
673
Modelling of sulfide oxidation with reactive transport at a mine drainage site
674
Modelling of sulfuric acid and ammonium sulfate aerosol formation in the aerrea2 reactor
675
Modelling of Sunspot Equilibrium Considering Stratification and Temperature Gradients
676
Modelling of Supercritical Fluid Extraction by Hybrid Peng–Robinson Equation of State and Genetic Algorithms
677
Modelling of superheated steam drying for combined heat and power at a corn ethanol plant using Aspen Plus software
678
Modelling of surface crack growth under lubricated rolling-sliding contact loading
679
Modelling of surface evaporation by laser ablation
680
Modelling of surface evolution in abrasive jet micro-machining including particle second strikes: A level set methodology
681
Modelling of surface finish and material removal rate in rough honing
682
Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
683
Modelling of surface plasmon resonance sensor for detection of mass concentration of ethanol and methanol in a binary mixture
684
Modelling of Surface Roughness Performance of Coated Cemented Carbide Groove Cutting Tool Via Artificial Neural Networks
685
Modelling of surface waves breaking effects in the ocean upper layer
686
Modelling of Suspended Sediment Transport in Coastal Areas Under Waves and Currents
687
Modelling of swelling of Fe–Cu compacts sintered at temperatures above the copper melting point
688
Modelling of Switched Mode Fly-back Supply for Engineering Education
689
Modelling of switched mode power converters using bond graph
690
Modelling of switching systems in bond graphs using the concept of switched power junctions
691
Modelling of syntactical processing in the cortex
692
Modelling of T Tauri jets with low mass accretion rate
693
Modelling of tap-changer transformers in an energy management system
694
Modelling of tar formation and evolution for biomass gasification: A review
695
Modelling of TBC system failure: Stress distribution as a function of TGO thickness and thermal expansion mismatch
696
Modelling of TCSC dynamics for control and analysis of power system stability
697
Modelling of temperature conditions near the bottom of well IDDP-1 in Krafla, Northeast Iceland
698
Modelling of temperature distribution in a solid polymer electrolyte fuel cell stack
699
Modelling of temperature evolution on metals during laser hardening process
700
Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure
701
Modelling of temperature history and phase transformations during cooling of steel
702
Modelling of Terrain Surface
703
Modelling of tetrahydrofuran promoted gas hydrate systems for carbon dioxide capture processes
704
Modelling of texture evolution in metals accounting for lattice reorientation due to twinning
705
Modelling of the abrasive water jet cutting process
706
Modelling of the acid hydrolysis of potato (Solanum tuberosum) for fermentative purposes
707
Modelling of the acid–base properties of natural and synthetic adsorbent materials used for heavy metal removal from aqueous solutions
708
Modelling of the acidification process and rheological properties of milk fermented with a yogurt starter culture using response surface methodology
709
Modelling of the acoustical properties of hemp particles
710
Modelling of the adsorption of bovine serum albumin on porous polyethylene membrane by back-propagation artificial neural network
711
Modelling of the adsorption of phenolic acids onto α,γ–alumina particles
712
Modelling of the adsorption of the chromium ion by modified clays Original Research Article
713
Modelling of the age hardening behaviour of Al–Mg–Si alloys Original Research Article
714
Modelling of the agglomeration in suspension process with multidimensional kernels
715
Modelling of the April 5, 2003, Stromboli (Italy) paroxysmal eruption from the inversion of broadband seismic data
716
Modelling of the association mechanism of a series of rodenticide molecules with lipid membrane investigated by computational chemistry and biochromatography Original Research Article
717
Modelling of the atomization of a plain liquid fuel jet in crossflow at gas turbine conditions
718
Modelling of the auto-ignition angle in diesel HCCI engines through D-optimal design
719
Modelling of the available latent heat of a CO2 hydrate slurry in an experimental loop applied to secondary refrigeration
720
Modelling of the batch treatment of wet granular solids with superheated steam in fluidized beds
721
Modelling of the bedrock response to glacial loading at the Olkiluoto site, Finland
722
Modelling of the behaviour of gas-solid two-phase mixtures flowing through packed beds
723
Modelling of the behaviour of seismically strengthened masonry walls subjected to cyclic in-plane shear
724
Modelling of the bioleaching of sulphide ores: application for the simulation of the bioleaching/gravity section of the Kasese Cobalt Company Ltd process plant
725
Modelling of the bond–slip behavior in FRP reinforced masonry
726
Modelling of the borehole filling of double U-pipe heat exchangers
727
Modelling of the bottom water flow through the Romanche Fracture Zone with a primitive equation model––Part 2: Comparison of vertical mixing parameterisations with observations
728
Modelling of the break up mechanism in gas atomization of liquid metals Part II. The gas flow model
729
Modelling of the break up mechanism in gas atomization of liquid metals. Part I: The surface wave formation model
730
Modelling of the canopy conductance of potted cherry trees based on an artificial neural network
731
Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verification
732
Modelling of the cation binding properties of fulvic acids: an extension of the RANDOM algorithm to include nitrogen and sulphur donor sites
733
Modelling of the CCK antagonist activity of benzodiazepines on gastrin receptors
734
Modelling of the change in national exchange rate model depending on the economic parameters of a natural gas cogeneration system: Turkey case
735
Modelling of the coefficient of performance of an air-cooled screw chiller with variable speed condenser fans
736
Modelling of the combined late-winter ice cap edge and slope winds in Mars Hellas and Argyre regions
737
Modelling of the combustion process and NOx emission in a utility boiler
738
Modelling of the compression behaviour of metallic hollow-sphere structures: About the influence of their architecture and their constitutive material’s equations
739
Modelling of the concentration polarization of the bivalents salts using a Nanomax50 membrane in nanofiltration process Original Research Article
740
Modelling of the conductive heat transfer through nano-structured porous silica materials
741
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
742
Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary, India
743
Modelling of the conversion of weak organic acids by bipolar membrane electrodialysis Original Research Article
744
Modelling of the coolant flow with heat flow controlled temperature sources in thermal networks [in induction motors]
745
Modelling of the crack growth initiation in viscoelastic media by the Gθv-integral
746
Modelling of the Current Density Distributions during Cortical Electric Stimulation for Neuropathic Pain Treatment
747
Modelling of the cutting tool stresses in machining of Inconel 718 using artificial neural networks
748
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
749
Modelling of the defect structure in GaN MOCVD thin films by X-ray diffraction
750
Modelling of the deformation process under thermo-mechanical fatigue conditions
751
Modelling of the deposition of retardant in a tree crown during fire fighting
752
Modelling of the dispersion and deposition of coarse particulate matter under neutral atmospheric conditions
753
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
754
Modelling of the dose-rate variations with depth in the Martian regolith using GEANT4
755
Modelling of the dynamic behaviour of profiled composite floors
756
MODELLING OF THE DYNAMIC LOAD PLATE TEST WITH THE LIGHT FALLING WEIGHT DEVICE
757
Modelling of the dynamic threshold MOSFET
758
Modelling of the dynamic tool–chip interface in metal cutting
759
MODELLING OF THE DYNAMICS OF A DROPLET USING THE LATTICE BOLTZMANN METHOD
760
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method
761
Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading
762
Modelling of the effect of dislocation channel on intergranular microcrack nucleation in pre-irradiated austenitic stainless steels during low strain rate tensile loading
763
Modelling of the effect of dry periods on yielding of spring barley
764
Modelling of the effect of friction on cold strip rolling
765
Modelling of the effect of precipitates on work-hardening, ductility and impact behaviour of ferritic–martensitic Cr steels
766
Modelling of the effect of solute structure and mobile phase pH and composition on the retention of phenoxy acid herbicides in reversed-phase high-performance liquid chromatography Original Research Article
767
Modelling of the effectiveness of bicycle helmets under impact
768
Modelling of the effectiveness of bicycle helmets under impact
769
Modelling of the effectiveness of bicycle helmets under impact
770
Modelling of the effects of welding conditions on dilution of stainless steel claddings produced by gas metal arc welding procedures
771
Modelling of the elasto-viscoplastic damage behaviour of glassy polymers
772
Modelling of the Electric Field Distribution in Deep Transcranial Magnetic Stimulation in the Adolescence, in the Adulthood, and in the Old Age
773
Modelling of the electrochemical machining process by the boundary element method
774
Modelling of the elution behaviour in hybrid micellar eluents with different organic modifiers Original Research Article
775
Modelling of the energy absorption by polymer composites upon ballistic impact
776
Modelling of the enzymatic synthesis of taste dipeptides with simultaneous extraction in a membrane phase contactor Original Research Article
777
Modelling of the equilibrium properties of the system H3PO4–H2O: representation of VLE and liquid phase composition
778
Modelling of the evolution of crack of nanoscale in iron
779
Modelling of the evolution of micro-grain misorientations during creep of tempered martensite ferritic steels
780
Modelling of the excitation and the propagation of nerve impulses by natural and artificial stimulations Original Research Article
781
Modelling of the fate of selected endocrine disruptors in a municipal wastewater treatment plant in South East Queensland, Australia Original Research Article
782
Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties
783
Modelling of the field emission microtriode with emitter covered with porous silicon
784
Modelling of the film thickness effecton the carrier’s mobility in polysilicon thin film transistors
785
Modelling of the fin type heat exchanger for the HTS current leads of W7-X and JT-60SA Original Research Article
786
Modelling of the finned convection section of a biomass boiler
787
Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion
788
Modelling of the flooding in the Okavango Delta, Botswana, using a hybrid reservoir-GIS model
789
Modelling of the flow at the rotor disc in a geothermal turbine of 110 MW
790
Modelling of the flow behavior of activated carbon cloths using a neural network approach
791
Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation
792
Modelling of the formation conditions of structure-H hydrates
793
Modelling of the Forming Limit Band –A new Method to Increase the Robustness in the Simulation of Sheet Metal Forming Processes
794
Modelling of the Frame “Russia” In the French Newspaper Discourse
795
Modelling of the fuel mechanical behavior: from creep laws to internal variable models Original Research Article
796
Modelling of the gas to fuel droplets radiative exchange
797
Modelling of the grain growth and the densification of SnO2-based ceramics
798
Modelling of the grain size probability distribution in polycrystalline nanomaterials
799
Modelling of the growth of populations of Listeria monocytogenes and a bacteriocin-producing strain ofLactobacillus in pure and mixed cultures Original Research Article
800
Modelling of the growth/no growth interface of Wallemia sebi and Eurotium herbariorum as a function of pH, aw and ethanol concentration
801
Modelling of the growth–no growth interface of Issatchenkia occidentalis, an olive spoiling yeast, as a function of the culture media, NaCl, citric and sorbic acid concentrations: Study of its inactivation in the no growth region
802
Modelling of the hamstring muscle group by use of fractional derivatives
803
Modelling of the hardness of electroplated nickel coatings on copper substrates
804
Modelling of the heat exchangers of a small capacity, hot water driven, air-cooled H2O–LiBr absorption cooling machine
805
Modelling of the heat input for face-milling processes
806
Modelling of the heat transfer of transport rollers in kilns
807
Modelling of the HFR-EU1BIS experiment and thermomechanical evaluation Original Research Article
808
Modelling of the high pressure–temperature effects on naringin hydrolysis based on response surface methodology
809
Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network
810
Modelling of the humidity effect on the barrier height in SnO2 varistors
811
Modelling of the hydrogen distribution at a crack tip
812
Modelling of the hydrogen distribution at a crack tip
813
Modelling of the hydro-mechanical response of sedimentary rocks of southern Ontario to past glaciations
814
Modelling of the hygroelastic behaviour of a wood-based composite for construction
815
Modelling of the hysteresis effect of target voltage in reactive magnetron sputtering process by using neural networks
816
Modelling of the impact of air shock wave on obstacle covered by porous screen
817
Modelling of the implantation and the annealing stages of 800 keV 3He implanted tungsten: Formation of nanovoids in the near surface region
818
Modelling of the indentation response of coatings and surface treatments
819
Modelling of the individual and combined effects of water activity and temperature on the radial growth of Aspergillus flavus and A. parasiticus on corn Original Research Article
820
Modelling of the inelastic behavior of powder based AlFe9V1Si2 alloy with intermetallic phase
821
Modelling of the influence of aerosol processes for the dispersion of vehicular exhaust plumes in street environment
822
Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids Original Research Article
823
Modelling of the initial stages of the electropolymerization mechanism of o-phenylenediamine
824
Modelling of the interaction between phase transformation and precipitation: Coupled kinetics in microalloyed multiphase steels
825
Modelling of the interaction of lower and higher modes in two-dimensional MHD-equations Original Research Article
826
Modelling of the interface between a thin film and a substrate within a strain gradient plasticity framework
827
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
828
Modelling of the interfacial behaviour in the Hi-Nicalon fibre-reinforced α-Si3N4 ceramic matrix composites using microindentation tests
829
Modelling of the interline power flow controller and the generalised unified power flow controller in Newton power flow
830
Modelling of the internal stress in dislocation cell structures
831
Modelling of the investment casting process
832
Modelling of the ion-exchange properties and indirect determination of the interstitial water composition of an argillaceous rock. Application to the Callovo-Oxfordian low-water-content formation
833
Modelling of the ionosphere/thermosphere behaviour during the April 2002 magnetic storms: A comparison of the UAM results with the ISR and NRLMSISE-00 data Original Research Article
834
Modelling of the kaolin deposits and reserve classification challenges of Charentes Basin, France
835
Modelling of the kinetics of colour change in hazelnuts during air roasting Original Research Article
836
Modelling of the kinetics of thermal inactivation of glucoamylase from Aspergillus niger
837
Modelling of the Lenzing SO2 recovery process and validation with plant data
838
Modelling of the life cycle of Chironomus species using an energy-based model
839
Modelling of the life cycle of products with data acquisition features
840
Modelling of the loading rate in facultative wastewater stabilization ponds and the assessment of organic matter decline
841
Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects
842
Modelling of the long term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part I. Model description and evaluation
843
Modelling of the long-term fate of pesticide residues in agricultural soils and their surface exchange with the atmosphere: Part II. Projected long-term fate of pesticide residues
844
Modelling of the Mannesmann effect
845
Modelling of the mass flow distribution around an array of rectangular blocks in-line arranged and simulating the cross-section of a winding disc-type transformer
846
Modelling of the mechanical behavior and damage processes of fibrous ceramic matrix composites: application to a 2-D SiC/SiC
847
Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure
848
Modelling of the mesophilic anaerobic co-digestion of olive mill wastewater with olive mill solid waste using anaerobic digestion model No. 1 (ADM1)
849
Modelling of the metallic phases of different Pt–Rh/Al2O3–CeO2 catalysts: influence of the rhodium loading and nature of the metallic precursors Original Research Article
850
Modelling of the micro-segregation of twin-roll thin strip casting
851
Modelling of the microstructure and strength evolution in Al–Mg–Si alloys during multistage thermal processing Original Research Article
852
Modelling of the microstructure and transport properties of concrete
853
Modelling of the microstructure: From classical cellular automata approach to the frontal one
854
Modelling of the migration of trace elements along groundwater flowpaths by using a steady state approach application to the site at El Berrocal (Spain)
855
Modelling of the mixed convection in the windings of a disc-type power transformer
856
Modelling of the moisture concentration field due to cyclical hygrothermal conditions in thick laminated pipes
857
Modelling of the monthly and daily behaviour of the runoff of the Xallas river using Box–Jenkins and neural networks methods
858
Modelling of the motion of a cart on a smooth rigid surface
859
Modelling of the motion of a disk rolling on a curve in
860
Modelling of the motion of a disk rolling on a smooth rigid surface Original Research Article
861
Modelling of the motion of a disk rolling on a torus
862
Modelling of the multiaxial elasto-plastic behaviour of porous metals with internal gas pressure
863
Modelling of the nitriding process
864
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
865
Modelling of the non-stationary thermal neutron transport in hydrogenous media using the MCNP code
866
Modelling of the operation process of repairable technical objects with the use information from an artificial neural network
867
Modelling of the outer electron belt flux dropout and losses during magnetic storm main phase Original Research Article
868
Modelling of the panel zone in steel and composite moment frames
869
Modelling of the particle size distribution function in the nucleation and early stages of thin film growth
870
Modelling of the Pb17Li/water interaction within a blanket module
871
Modelling of the performance of asphalt pavement using response surface methodology
872
Modelling of the performance of asphalt pavement using response surface methodology—the kinetics of the aging
873
Modelling of the performance of industrial HDS reactors using a hybrid neural network approach
874
Modelling of the perimeter recombination effect in GaAs-based micro-solar cell
875
Modelling of the periodic anaerobic baffled reactor (PABR) based on the retaining factor concept
876
MODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
877
Modelling of the phase behaviour for vegetable oils at supercritical conditions
878
Modelling of the physical behaviour of clay barriers close to water saturation
879
Modelling of the planar motion of a rolling four links robot
880
Modelling of the plasma spray process with liquid feedstock injection
881
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
882
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
883
Modelling of the plastic behaviour of III–V compound semiconductors during compressive tests
884
Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach
885
Modelling of the plastification near the rough surface of a rail by the wheel–rail contact
886
Modelling of the pore flow in capillary electrochromatography
887
Modelling of the pore structure variation with pH for pore-filled pH-sensitive poly(vinylidene fluoride)–poly(acrylic acid) membranes
888
Modelling of the porous anodizing of aluminium: Generation of experimental input data and optimization of the considered model
889
Modelling of the post-localization behaviour in tube hydroforming of low carbon steels
890
Modelling of the prediction of tensile and density properties in particle reinforced metal matrix composites by using neural networks
891
Modelling of the Process of Solid-Liquid Extraction of Total Polyphenols from Soybeans
892
Modelling of the pyrolysis of high density polyethylene: Product distribution in a fluidized bed reactor
893
Modelling of the pyrolysis of wet wood
894
Modelling of the quasisaturation behaviour in the high-voltage MOSFET with vertical trench gate
895
Modelling of the rate of oil spill disappearance from seawater for Kuwaiti crude and its products
896
Modelling of the reaction of N-oxidation of 2-methylpyridine using hydrogen peroxide and a complex metal catalyst
897
Modelling of the receiver transient flux distribution due to cloud passages on a solar tower thermal power plant
898
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
899
Modelling of the relationship moisture content to nutrient transformation rate in river sediments
900
Modelling of the residence time distribution in micromixers
901
Modelling of the residual state of friction stir welded plates Review Article
902
Modelling of the resuspension of particle clusters from multilayer aerosol deposits with variable porosity
903
Modelling of the retention of uncharged molecules with nanofiltration
904
Modelling of the Reynolds stress redistribution with a wall effect vector
905
Modelling of the rheological behaviour of aluminium alloys in multistep hot deformation using the multiple regression analysis and artificial neural network techniques
906
Modelling of the river flowrate: the influence of the training set selection
907
Modelling of the rock structure stress field near the cavities and estimation of the cavity effect influence on the tidal measurements Original Research Article
908
Modelling of the rolling processes by a 3-D rigid plastic/visco-plastic finite element method with shifted ICCG method
909
Modelling of the scatter in short fatigue cracks growth kinetics in relation with the polycrystalline microstructure
910
Modelling of the signal processing electronics of JET interferometer-polarimeter
911
Modelling of the signal processing electronics of JET interferometer-polarimeter
912
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
913
Modelling of the small pixel effect in gallium arsenide X-ray imaging detectors
914
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
915
Modelling of the space-to-drift-time relationship of the ATLAS monitored drift-tube chambers in the presence of magnetic fields
916
MODELLING OF THE SPALLED ROLLING ELEMENT BEARING VIBRATION SIGNAL: AN OVERVIEW AND SOME NEW RESULTS
917
Modelling of the spent fuel oxidation: Toward the operational model
918
Modelling of the static synchronous series compensator (SSSC) in three-phase Newton power flow
919
Modelling of the stiffness of elastic body
920
Modelling of the strand and mold temperature in the continuous steel caster
921
Modelling of the stress-strain state of block rock mass of ore deposits during development by caving mining systems
922
Modelling of the structure and vibrational properties of LDA, HDA, and VHDA amorphous ices
923
Modelling of the substrate heterogeneities experienced by a limited microbial population in scale-down and in large-scale bioreactors
924
Modelling of the sulfuric acid leaching of mechanically activated titanite
925
Modelling of the surface tension of binary and ternary mixtures with the gradient theory of fluid interfaces
926
Modelling of the surface tension of pure components with the gradient theory of fluid interfaces: a simple and accurate expression for the influence parameters
927
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
928
Modelling of the temperature and electric field dependence of substrate/gate current SILC with an elastic resonant trap assisted tunnelling mechanism
929
Modelling of the temperature distribution during field assisted sintering
930
Modelling of the temperature distribution during field assisted sintering Original Research Article
931
Modelling of the ternary system H3PO4/H2O/TBP
932
Modelling of the thermal behaviour of an ultracapacitor for a 42-V automotive electrical system
933
Modelling of the thermal-mechanical behaviour of a single size beryllium pebble bed
934
Modelling of the thermic exchanges during a drilling. Resolution with Adomianʹs decomposition method
935
Modelling of the thermodynamic properties of ionic solutions using a stepwise solvation-equilibrium model
936
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
937
Modelling of the thermodynamic properties of the ABr–CeBr3 (A=Li–Cs ) systems
938
Modelling of the thermodynamic properties of the water–ammonia mixture by three different approaches
939
Modelling of the three phase LLV region for ternary hydrocarbon mixtures with the Soave-Redlich-Kwong equation of state
940
Modelling of the three-dimensional creep behavior of non-reinforced thermoplastics
941
Modelling of the transport of methane and higher hydrocarbons in fusion devices
942
Modelling of the tumor growth under oncolytic virotherapy with piecewise differential operators: The effects of combinations of specialist viruses
943
Modelling of the variant selection mechanism in the phase transformation of HSLA steel produced by compact strip production Original Research Article
944
Modelling of the Vickers hardness of paint coatings deposited on metallic substrates
945
Modelling of thermal and flow stratification for reactor pressure vessel pressurised thermal shock Original Research Article
946
Modelling of thermal conductivity of porous materials: application to thick thermal barrier coatings
947
Modelling of thermal desorption of hydrogen from metals
948
Modelling of thermal desorption of hydrogen from metals
949
Modelling of thermal energy storage in industrial energy systems the method development of MIND
950
Modelling of thermal phenomena in electric arc during surfacing
951
Modelling of thermal pressure forming of starch-based materials Original Research Article
952
Modelling of thermal removal of tars in a high temperature stage fed by a plasma torch
953
Modelling of thermal response of oil-heated tools due to different flow rates for the manufacture of composite structures
954
Modelling of thermal shock experiments of carbon based materials in JUDITH
955
Modelling of thermally detected optical absorption and luminescence of (In,Ga)N/GaN heterostructures
956
Modelling of thermally enhanced erosion of beryllium
957
Modelling of thermochemical plumes and implications for the origin of the Siberian traps
958
Modelling of thermomechanical fatigue stress relaxation in a single-crystal nickel-base superalloy
959
Modelling of Thin Elastic Plates with Small Piezoelectric Inclusions and Distributed Electronic Circuits. Models for Inclusions that Are Small with Respect to the Thickness of the Plate
960
MODELLING OF THIN LAYER DRYING KINETICS OF COCOA BEANS DURING ARTIFICIAL AND NATURAL DRYING
961
Modelling of thin layer drying kinetics of some fruits under open-air sun drying process Original Research Article
962
Modelling of thin layer drying of parsley leaves in a convective dryer and under open sun Original Research Article
963
Modelling of thin-film silicon solar cells
964
Modelling of thin-layer drying kinetics of red chillies Original Research Article
965
Modelling of Thrace Basin, NW Turkey using gravity and magnetic anomalies with control of seismic and borehole data
966
Modelling of Three-dimensional Air Temperature Distributions in Porous Media
967
Modelling of three-dimensional jet array impingement and heat transfer on a concave surface
968
Modelling of three-dimensional mechanical systems using point coordinates with a recursive approach
969
Modelling of three-dimensional temperature field inside the mould during continuous casting of steel
970
Modelling of three-layered piezoelectric plates
971
Modelling of thunderclouds and lightning generation on Titan
972
Modelling of tide and surge elevations in the Solent and surrounding waters: The importance of tide–surge interactions
973
Modelling of time related drying changes on matte coated paper with artificial neural networks
974
Modelling of time resolved and long contact time dissolution studies of spent nuclear fuel in 10 mM carbonate solution – A comparison between two different models and experimental data
975
Modelling of time-dependent behavior of the basal sliding surface of the إknes rockslide area in western Norway
976
Modelling of time-dependent biome shifts under global climate changes
977
Modelling of time-dependent biome shifts under global climate changes
978
Modelling of tonal noise control from subsonic axial fans using flow control obstructions
979
Modelling of tornado and microburst-induced wind loading and failure of a lattice transmission tower
980
Modelling of traffic flow and air pollution emission with application to Hong Kong Island
981
Modelling of transient liquid phase bonding in binary systems—A new parametric study
982
Modelling of transient moisture concentration of semolina pasta during air drying Original Research Article
983
Modelling of transient temperature fields during filling stage of powder injection moulding
984
Modelling of transport and biogeochemical processes in pollution plumes: literature review and model development
985
Modelling of transport and biogeochemical processes in pollution plumes: Vejen landfill, Denmark
986
Modelling of transport and dispersion of arbitrary-density particles in turbulent flows
987
Modelling of transport phenomena in laser surface alloying with distributed species mass source
988
Modelling of transport processes in soils at various scales in space and time: J. Feyen and K. Wiyo (Eds.), Wageningen Pers, Wageningen, The Netherlands, 1999. Softcover 794 pp. US$ 149. ISBN 90-74134-76-9
989
Modelling of transport properties and state of water of polyelectrolytes containing various amounts of water
990
Modelling of Transportation Policies to Encourage Shifting from Private Car to the Public Transport Usage in Putrajaya
991
MODELLING OF TRANSVERSE VIBRATION OF SHORT BEAMS FOR CRACK DETECTION AND MEASUREMENT OF CRACK EXTENSION
992
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
993
Modelling of tree crowns with realistic morphological features: New reconstruction methodology based on Iterated Function System tool
994
Modelling of Trickle Bed Reactor for the Catalytic Wet Air Oxidation of Phenol
995
Modelling of tritium retention and target lifetime of the ITER divertor using the ERO code
996
Modelling of trona based spray dry scrubbing of SO2
997
Modelling of tropical greenhouse temperature by auto regressive and neural network models
998
Modelling of Tsunami Waves
999
Modelling of tubes subjected to axial crushing
1000
Modelling of Tudung Saji Weaving Using Elements in Group Theory