<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal effects of shoulder electrothermal arthroscopic capsulorrhaphy monitored by differential scanning calorimetry—A preliminary study
2
Thermal effects of some polymerisation and polycondensation reactions, polymeric ammonium quaternary salts
3
Thermal effects of stator potting in an axial-flux permanent magnet synchronous generator
4
Thermal effects of stray load losses in induction machines
5
Thermal effects of surface layers on divertor target plates
6
Thermal effects of the Er:YAG laser on a simulated dental pulp: a quantitative evaluation of the effects of a water spray
7
Thermal effects of the interactions of carbon monoxide with zeolites
8
Thermal effects of the intrusion of basaltic magma into a more silicic magma chamber and implications for eruption triggering
9
Thermal effects of the intrusion of basaltic magma into a more silicic magma chamber and implications for eruption triggering
10
Thermal Effects of Using Various Metal Disks inside Liquid-PCM Thermal Storage System
11
Thermal effects on 1H and 2H distributions determined by SIMS in atomic layer deposition of HfO2 and Al2O3 using heavy water
12
Thermal effects on bacterial bioaerosols in continuous air flow Original Research Article
13
Thermal effects on dilepton production from π-π annihilation
14
Thermal effects on effectiveness of catalysts having bidisperse pore size distributions
15
Thermal effects on ESR signal evolution in nano and bulk CuO powder
16
Thermal effects on flow and dispersion over urban areas: Capabilities for prediction by physical modeling
17
THERMAL EFFECTS ON FLOW PROPERTIES OF ALUMINUM ALLOYS
18
Thermal effects on fracture of biaxial-oriented poly(ethylene terephthalate) (BOPET) film
19
Thermal effects on geometrically nonlinear vibrations of rectangular plates with fixed edges
20
Thermal effects on interfacial stress transfer characteristics of carbon nanotubes/polymer composites
21
Thermal effects on laminated composite shells containing interfacial imperfections
22
Thermal effects on mass and spatial resolution during laser pulse atom probe tomography of cerium oxide
23
Thermal effects on mixed electro-osmotic and pressure-driven flows in triangle microchannels
24
Thermal effects on nonlinear vibrations of functionally graded doubly curved shells using higher order shear deformation theory
25
Thermal effects on photogeneration of free carriers in organic conductors
26
Thermal effects on polybrominated diphenyl ether mass transfer and emission from computer cases
27
Thermal effects on postbuckling of nonlinear microbeams based on the modified strain gradient theory
28
Thermal effects on Rayleigh–Marangoni–Bénard instability in a system of superposed fluid and porous layers
29
Thermal effects on structural characterization of evaporated CdTe films during and after deposition
30
Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation
31
Thermal effects on the Casimir mass in λφ4 theory
32
Thermal effects on the electric deflection of toluene molecules
33
Thermal effects on the electrical degradation of thin film resistors
34
Thermal effects on the growth by metal organic chemical vapour deposition of TiO2 thin films on (100) GaAs substrates
35
Thermal effects on the mechanical properties of marble, travertine and concrete cores under direct tensile test
36
Thermal effects on the process of electropolymerization of pyrrole on mild steel
37
Thermal effects on the sound transmission through aerospace composite structures
38
Thermal effects on the stability of embedded carbon nanotubes
39
Thermal effects on the structural properties of tungsten oxide nanoparticles
40
Thermal effects on the structure of cereal starches. EPR and Raman spectroscopy studies
41
Thermal effects on vehicle emission dispersion in an urban street canyon
42
Thermal Effects Study on Stimulated Brillouin Light Scattering in Photonic Crystal Fiber
43
Thermal efficiency evaluation of HI synthesis/concentration procedures in the thermochemical water splitting IS process
44
Thermal efficiency evaluation of open-loop SI thermochemical cycle for the production of hydrogen, sulfuric acid and electric power
45
Thermal efficiency evaluation of the thermochemical H2S splitting cycle for the hydrogen and sulfur production
46
Thermal efficiency improvement in high output diesel engines a comparison of a Rankine cycle with turbo-compounding
47
Thermal efficiency of a regenerative Brayton cycle with isothermal heat addition
48
THERMAL EFFICIENCY OF AN AIR SOLAR COLLECTOR WITH EXTENDED ABSORPTION SURFACE AND INCREASED CONVECTION
49
Thermal efficiency of carbon nanotube quantum dots in the presence of electron–phonon interaction
50
Thermal Efficiency of Double Pass Solar Collector with Longitudinal Fins Absorbers
51
Thermal Efficiency of Indoor Solar Illumination by Flat Reflectors
52
Thermal Efficiency of LPG and PNG-fired burners: Experimental and numerical studies
53
Thermal efficiency of natural gas balanced-flue space heaters: Measurements for commercial devices
54
Thermal efficiency of near-wall gas-droplet screens II. Experimental study and comparison with numerical results
55
THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF STEEL WOVEN REINFORCED ALUMINUM METAL-MATRIX COMPOSITE LAMINATED PLATES
56
THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF SYMMETRIC ALUMINUM METAL-MATRIX COMPOSITE LAMINATED PLATES UNDER LINEARLY DISTRIBUTED TEMPERATURE
57
THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF SYMMETRIC ALUMINUM METAL-MATRIX COMPOSITE LAMINATED PLATES UNDER UNIFORMLY DISTRIBUTED TEMPERATURE
58
Thermal elastohydrodynamic lubrication of starved elliptical contacts
59
Thermal elastohydrodynamic simulation of involute spur gears incorporating mixed friction
60
Thermal elasto-plastic computation model for a buried oil pipeline in frozen ground
61
Thermal electrocyclization reactions II: benzooctatetraenes and benzodecapentaenes
62
Thermal electron emission from saline hydrides deposited on a metal surface
63
Thermal electron measurement of the nighttime upper ionosphere by KOMPSAT-1 and comparison with the IRI Original Research Article
64
Thermal electrons and Watson Crick AT(−)
65
Thermal elevation in the human eye and head due to the operation of a retinal prosthesis
66
Thermal elongations in steam turbines with welded rotors made of advanced materials at supercritical steam parameters
67
Thermal embrittlement of Fe-based amorphous ribbons
68
Thermal emission and band-filling effects on the photoluminescence rise time of InGaAs/InAs/GaAs quantum dots
69
Thermal emission at radio frequencies from supernova remnants and a modified theoretical Σ–D relation
70
Thermal Emission from Binary Millisecond Pulsar Stars (MSPs)
71
Thermal emission from isolated neutron stars and their surface magnetic field: Going quadrupolar? Original Research Article
72
Thermal emission from SNRs and plasma diagnostics Original Research Article
73
Thermal emission of alkaline ions from solid electrolyte: evidence of nonstoichiometric reaction
74
Thermal emission properties of Al2O3/Er3Al5O12 eutectic ceramics
75
Thermal Emission Spectrometer Observations of Martian Planet-Encircling Dust Storm 2001A
76
Thermal emission spectroscopy (5.2–38 μm) of three Trojan asteroids with the Spitzer Space Telescope: Detection of fine-grained silicates
77
Thermal emittance of sputter deposited infrared reflectors in spectrally selective tandem solar absorbers
78
Thermal end effects on electroosmotic flow in a capillary
79
Thermal Ene Reactions of 3-(Alk-2-enyl)benzylamino-2-(methoxycarbonyl)acrolein Derivatives Leading to 4,5-Dihydro-1H-azepines
80
Thermal energy assisted heavy atom effect: fluorescence quenching of 9-cyanoanthracene in the supercritical fluid of Xe
81
Thermal energy conduction in a honey bee comb due to cell-heating bees
82
Thermal energy management in the bread baking industry using a system modelling approach
83
THERMAL ENERGY RATIONALISATION AND ENVIRONMENTAL POLLUTION REDUCTION FOR BALADY BREAD BAKERIES
84
Thermal energy recovery of air conditioning system––heat recovery system calculation and phase change materials development
85
Thermal energy saving in industrial halls using vertical air solar heaters
86
Thermal energy savings in pilot-scale plate heat exchanger system during product processing using modified surfaces
87
Thermal energy storage behavior of Al2O3–H2O nanofluids
88
Thermal Energy Storage Characteristics of a Latent Heat Storage Vessel Packed with Surface Cross-Linked, Form-Stabilized, High-Density Polyethylene Pellets by Boiling Phenomenon
89
Thermal Energy Storage Characteristics of a Latent Heat Storage Vessel Packed with Surface Cross-Linked, Form-Stabilized, High-Density Polyethylene Pellets by Boiling Phenomenon
90
Thermal energy storage for direct steam generation
91
Thermal Energy Storage in the Ground of a Greenhouse by the Polypropylene Capillary Heat Exchanger
92
Thermal energy storage performance of paraffin in a novel tube-in-shell system
93
Thermal energy storage performance of paraffin-based composite phase change materials filled with hexagonal boron nitride nanosheets
94
Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs
95
Thermal energy storage properties of mannitol–fatty acid esters as novel organic solid–liquid phase change materials
96
Thermal energy storage strategies for effective closed greenhouse design
97
Thermal energy storage systems for electricity production using solar energy direct steam generation technology
98
Thermal energy storage using thermo-chemical heat pump
99
Thermal energy storage with heat transfer augmentation using thermosyphons
100
Thermal energy storages analysis for high temperature in air solar systems
101
Thermal enhancement effect on chemo-radiation of glioblastoma multiform
102
Thermal Enhancement Effects of Buoyancy-Driven Heat Transfer of Hybrid Nanofluid Confined in a Tilted U-Shaped Cavity
103
Thermal enhancement from heat sinks by using perforated fins
104
Thermal enhancement in a flat-plate solar water collector by flow pulsation and metal-foam blocks
105
Thermal enhancement in a round tube with snail entry and coiled-wire inserts
106
Thermal enhancement of AFM phase contrast for imaging diblock copolymer thin film morphology
107
Thermal enhancement of AFM phase contrast for imaging diblock copolymer thin film morphology
108
Thermal enhancement of charge and discharge cycles for adsorbed natural gas storage
109
Thermal enhancement of PFA-based grout for geothermal heat exchangers
110
Thermal enhancement of stormwater runoff by paved surfaces
111
Thermal entangled quantum heat engine
112
Thermal entanglement in spin chain with XX, XY, and XZ Heisenberg interaction
113
Thermal entanglement in the Heisenberg XXZ model with Dzyaloshinskii–Moriya interaction
114
Thermal entanglement in three-qubitIzing model with nearest and next-nearestneighbor interactionswith added Dzyaloshinskii-Morriya interaction at low temperatures
115
Thermal entanglement of a two-level atom and bimodal photons in a Kerr nonlinear coupler
116
Thermal entanglement of Hubbard dimers in the nonextensive statistics
117
Thermal entanglement versus mixture in a spin chain: Generation of maximally entangled mixed states
118
Thermal entrainment and melting in mantle plumes
119
Thermal entry flow for a viscoelastic fluid: the Graetz problem for the PTT model
120
Thermal entry length in falling liquid films at high Reynolds numbers
121
Thermal entry region analysis through the finite integral transform technique in laminar flow of Bingham fluids within concentric annular ducts
122
Thermal environment and construction workers’ productivity: some evidence from Thailand
123
Thermal Environment and Human Birth Weight
124
Thermal environment and human responses in underground shopping malls vs department stores in Japan
125
Thermal Environment Design ofAtria in the Hong Kong Special Administrative Region: A Survey Study
126
Thermal environment during and outside courtship jointly determine female remating rate in Drosophila melanogaster
127
Thermal environment in a confined space of high-rise building with split air conditioning system
128
Thermal environment in Swedish hospitals: Summer and winter measurements
129
Thermal environment of the courtyard style cave dwelling in winter
130
Thermal environment simulation for three dimensional replacement of urban activity
131
Thermal environment simulation for three dimensional replacement of urban activity
132
Thermal epimerization of inositol 1,3-benzylidene acetals in the molten state
133
Thermal equation of state of (Mg0.91Fe0.09)2SiO4 ringwoodite
134
Thermal equation of state of (Mg0.9Fe0.1)2SiO4 olivine
135
Thermal equation of state of akimotoite MgSiO3 and effects of the akimotoite–garnet transformation on seismic structure near the 660 km discontinuity
136
Thermal equation of state of CaFe2O4-type MgAl2O4
137
Thermal equation of state of iron and Fe0.91Si0.09
138
Thermal equation of state of magnesiowüstite (Mg0.6Fe0.4)O
139
Thermal equation of state of magnesite to 32 GPa and 2073 K
140
Thermal equation of state of majorite with MORB composition
141
Thermal equation of state of natural chromium spinel up to 26.8 GPa and 628 K
142
Thermal equation of state of superhydrous phase B to 27 GPa and 1373 K
143
Thermal equation of state, and melting and thermoelastic properties of bcc tantalum from molecular dynamics Original Research Article
144
Thermal equation-of-state of osmium: a synchrotron X-ray diffraction study Original Research Article
145
Thermal equations of state of dioctahedral micas on the join muscovite–paragonite
146
Thermal equilibration and expansion in nucleus-nucleus collisions at the AGS
147
Thermal equilibration in an expanding parton plasma Original Research Article
148
Thermal equilibration of brane-worlds
149
Thermal equilibration of soot charge distributions by coagulation
150
Thermal equilibrium in Europaʹs ice shell
151
Thermal equilibrium polarization: a near-surface effect in dipolar-based molecular crystals
152
Thermal Equilibrium States of Europaʹs Ice Shell: Implications for Internal Ocean Thickness and Surface Heat Flow
153
Thermal equilibrium states of the quantum hydrodynamic model for semiconductors in one dimension Original Research Article
154
Thermal Equivalent Short-Time Currents in Three-Phase Balanced Short Circuits
155
Thermal error of a hydrostatic spindle
156
Thermal error optimization modeling and real-time compensation on a CNC turning center
157
Thermal escape of carriers out of CdTe/ZnMgTe nanostructures
158
Thermal escape process of photogenerated carriers from GaAs single-quantum-well contained in GaAs/AlAs superlattices
159
Thermal etching of SiC
160
Thermal etching of α-Zr single-crystal surfaces
161
Thermal evaluation for applying TEFC induction motors on short-time and intermittent duty cycles
162
Thermal evaluation of a chair with fans as an individually controlled system
163
THERMAL EVALUATION OF CAVITY RECEIVER USING WATER/PG AS THE SOLAR WORKING FLUID
164
Thermal evaluation of nanofluids in heat exchangers
165
Thermal evaluation of several configurations of insulation and structural materials for some metal stud walls
166
Thermal Evaluation of TEFC Induction Motors Operating on Frequency-Controlled Variable-Speed Drives
167
Thermal evaluation of TiN/CNx multilayer films
168
Thermal evaluation of uranium silicide miniplates irradiated at high heat flux
169
Thermal evaluation of vertical greenery systems for building walls
170
Thermal evaporation and condensation synthesis of metallic Zn layered polyhedral microparticles
171
Thermal evaporation of rare-earth chlorides: application to vapor phase deposition of rare earth-doped fluoride glass waveguides
172
Thermal event records in SE China coastal areas: Constraints from Monazite Ages of Beach Sands from two sides of the Taiwan Strait
173
Thermal events occurring during the combustion of biomass residue
174
Thermal evolution and catalytic activity of Pd/Mg/Al mixed oxides obtained from a hydrotalcite-type precursor
175
Thermal evolution and crystal structure of a polymeric complex: Pb3(3,5-dicarboxylatopyrazole)2(NO3)2$4H2O
176
Thermal evolution and crystal structures of the 3,5-pyrazole dicarboxylic acid (hydrated form and anhydrous): Ligations with nickel II and barium II
177
Thermal evolution and crystallization kinetics of potassium-based geopolymer
178
Thermal evolution and differentiation of planetesimals and planetary embryos
179
Thermal evolution and geometry of the descending lithosphere beneath the SE-Carpathians: An insight from the past
180
Thermal evolution and grain boundary phase transformations in severely deformed nanograined Al–Zn alloys Original Research Article
181
Thermal evolution and mechanical properties of hard Ti–Cr–B–N and Ti–Al–Si–B–N coatings
182
Thermal evolution and structural study of 2:1 mullite from monophasic gels
183
Thermal evolution behavior of carbides and γ′ precipitates in FGH96 superalloy powder
184
Thermal evolution in air and argon of nanocrystalline MoS2 synthesized under hydrothermal conditions
185
Thermal evolution model for the H chondrite asteroid-instantaneous formation versus protracted accretion
186
Thermal evolution of a sheared continental margin: Insights from the Ballenas transform in Baja California, Mexico
187
Thermal evolution of a TiO2–V2O5 interface Original Research Article
188
Thermal evolution of ball milled nanocrystalline iron
189
Thermal evolution of cobalt nanocrystals embedded in silica
190
Thermal evolution of coronal active regions observed with the Yohkoh Soft X-ray Telescope Original Research Article
191
Thermal evolution of cratonic roots
192
Thermal evolution of defects produced by implantation of H, D and He in Silicon
193
Thermal evolution of diffusive transport of atmospheric halocarbons through artificial sea–ice
194
Thermal evolution of early solar system planetesimals and the possibility of sustained dynamos
195
Thermal evolution of Earth with xenon degassing: A self-consistent approach
196
Thermal evolution of hole dynamics in the large-dimensional t - J model
197
Thermal evolution of Kuiper belt objects, with implications for cryovolcanism
198
Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution
199
Thermal evolution of n- and iso-alkanes in oils. Part 1: Pyrolysis model for a mixture of 78 alkanes (C1–C32) including 13,206 free radical reactions
200
Thermal evolution of Pluto and implications for surface tectonics and a subsurface ocean
201
Thermal evolution of sol–gel-obtained phosphosilicate solids (SiPO)
202
Thermal Evolution of the Crystallographic and Magnetic Structure in LuVO3: A Neutron Diffraction Study
203
Thermal evolution of the Earth as recorded by komatiites
204
Thermal evolution of the Earth: Secular changes and fluctuations of plate characteristics
205
Thermal evolution of the Kuh-e-Asmari and Sim anticlines in the Zagros fold-and-thrust belt: Implications for hydrocarbon generation
206
Thermal evolution of the Lesser Himalaya, central Nepal: Insights from K-white micas compositional variation
207
Thermal evolution of the mantle underneath the Mid-German crystalline rise: Evidence from mantle xenoliths from the Rhön area (Central Germany)
208
Thermal evolution of the mechanical properties of calcareous earthenware
209
Thermal evolution of the oceanic lithosphere: an alternative view
210
Thermal evolution of the Phlegraean magmatic system
211
Thermal evolution of V(III)-containing layered double hydroxides
212
Thermal evolution of vacancy defects induced in sintered UO2 disks by helium implantation
213
Thermal evolution of ZnO-Bi2O3-Sb2O3 system in the region of interest for varistors
214
Thermal excitation of CO–Pt on the (2 × 1) Pt {1 1 0} surface: a theoretical simulation of a variable-temperature STM contrast
215
Thermal excitation of heavy nuclei with 5–15 GeV/c antiproton, proton and pion beams
216
Thermal exfoliation of fluorinated graphite
217
Thermal expansion along the NaAlSi2O6–NaFe3+Si2O6 and NaAlSi2O6–CaFe2+Si2O6 solid solutions
218
Thermal expansion and cation disorder in Bi2InNbO7
219
Thermal expansion and cation partitioning of MnFe2O4 (Jacobsite) from 1.6 to 1276 K studied by using neutron powder diffraction
220
Thermal expansion and characteristic points of –Na2O–SiO2 glass with added oxides
221
Thermal expansion and cooling rate dependence of transition temperature in ZrTiO4 single crystal
222
Thermal expansion and crystal structure of FeSi between 4 and 1173 K determined by time-of-flight neutron powder diffraction
223
Thermal expansion and deformation behaviour of aluminium-matrix composites in laser forming
224
Thermal expansion and dimensional stability of Al–Si matrix composite reinforced with high content SiC
225
Thermal expansion and electrochemical properties of Ni-doped GdBaCo2O5+δ double-perovskite type oxides
226
Thermal expansion and equation for state of KCN of different isotopic composition
227
Thermal expansion and glass transition temperature of the rare-earth doped oxynitride glasses
228
Thermal expansion and heat capacity of porosity-free nanocrystalline materials
229
Thermal expansion and heat capacity of porosity-free nanocrystalline materials
230
Thermal expansion and kinetic coefficients of crystals Original Research Article
231
Thermal expansion and magnetostriction in an anomalous Gd intermetallic compound
232
Thermal expansion and magnetostriction of GdAg2, and relations to the magnetoelastic paradox
233
Thermal expansion and mechanical properties of pure magnesium containing zirconium tungsten phosphate particles with negative thermal expansion
234
Thermal Expansion and Phase Formation of ZrW2O8 Aerogels
235
Thermal expansion and phase transitions in åkermanite and gehlenite
236
Thermal expansion and recrystallization of amorphous Al and Ti: A molecular dynamics study
237
Thermal expansion and solubility limits of plutonium-doped lanthanum zirconates
238
Thermal expansion and stability of cerium-doped Lu2SiO5
239
Thermal expansion and structural transformations of stuffed derivatives of quartz along the LiAlSiO4–SiO2 join: a variable-temperature powder synchrotron XRD study
240
Thermal expansion and structure of orthorhombic CaMnO3 Original Research Article
241
Thermal expansion and thermal conductivity characteristics of Cu–Al2O3 nanocomposites
242
Thermal expansion and thermal conductivity of glass-fibre reinforced nylon at low temperature Original Research Article
243
Thermal expansion and thermal conductivity of SmxZr1−xO2−x/2 (0.1 ≤ x ≤ 0.5) ceramics
244
Thermal expansion and thermal mismatch stress relaxation behaviors of SiC whisker reinforced aluminum composite
245
Thermal expansion and transition temperature of glasses in the systems BeO–Al2O3–B2O3 and MgO–Al2O3–B2O3
246
Thermal expansion anisotropy and site occupation of the pseudo-binary molybdenum vanadium silicide Mo5Si3-V5Si3
247
Thermal expansion anisotropy and site occupation of the pseudo-binary molybdenum vanadium silicide Mo5Si3–V5Si3 Original Research Article
248
Thermal expansion anisotropy in a Ti–6Al–4V/SiC composite
249
Thermal expansion anisotropy in a Ti–6Al–4V/SiC composite
250
Thermal expansion anisotropy in extruded SiC particle reinforced 2080 aluminum alloy matrix composites
251
Thermal expansion anisotropy in hot-pressed SiC-whisker-reinforced alumina composites
252
Thermal expansion anisotropy in hot-pressed SiC-whisker-reinforced alumina composites
253
Thermal expansion anisotropy of ternary titanium silicides based on Ti5Si3 Original Research Article
254
Thermal expansion anomaly and spontaneous magnetostriction of Gd2Fe17 compound
255
Thermal expansion behavior and chemical compatibility of BaxSr1−xCo1−yFeyO3−δ with 8YSZ and 20GDC
256
Thermal expansion behavior and high-temperature transport properties of Sr3YCo4 − xFexO10.5 + y, x = 0.0, 1.0, 2.0 and 3.0
257
Thermal expansion behavior and microstructure in bulk nanocrystalline selenium by thermomechanical analysis
258
Thermal expansion behavior and microstructure in bulk nanocrystalline selenium by thermomechanical analysis
259
Thermal expansion behavior and performance of VLP diffusion-bonded joints of SiCp/A356 composites
260
Thermal expansion behavior and polarization properties of lead-free ferroelectric potassium lithium tantalate niobate single crystals
261
Thermal expansion behavior and thermal mismatch stress of aluminum matrix composite reinforced by β-eucryptite particle and aluminum borate whisker
262
Thermal expansion behavior in fabricated cellular structures
263
Thermal expansion behavior in fabricated cellular structures
264
Thermal expansion behavior of a model ceramic–metal composite
265
Thermal expansion behavior of aluminum matrix composite reinforced by SnO2-coated Al18B4O33 whisker
266
Thermal Expansion Behavior of Amorphous Fe-Si-B Alloys Original Research Article
267
Thermal expansion behavior of composites based on axisymmetric ellipsoidal particles
268
Thermal expansion behavior of composites based on non-axisymmetric ellipsoidal particles
269
Thermal expansion behavior of Cu/Cu2O cermets with different Cu structures
270
Thermal expansion behavior of hydrate paramylon in the low-temperature region
271
Thermal expansion behavior of intermetallic compounds in the Mo–Si–B system
272
Thermal expansion behavior of La-doped (Ba0.5Sr0.5Co0.8Fe0.2)O3−δ cathode material
273
Thermal expansion behavior of MgO/Cu composite with lower MgO volume fraction
274
Thermal expansion behavior of Ni–Al2O3 composites with particulate and interpenetrating phase structures: An analysis using finite element method
275
Thermal expansion behavior of nylon 6 nanocomposites
276
Thermal Expansion Behavior of Precursor-Derived Amorphous Si-C-N and Si-B-C-N Ceramics
277
Thermal expansion behaviors of unidirectional carbon/carbon composites from 800 to 2500 °C
278
Thermal expansion behaviors of yttrium tungstates in the WO3–Y2O3 system
279
Thermal expansion behaviour in the oxygen deficient perovskites Sr2BSbO5.5 (B=Ca, Sr, Ba). Competing effects of water and oxygen ordering
280
Thermal expansion behaviour of aluminium/SiC composites with bimodal particle distributions Original Research Article
281
Thermal expansion behaviour of Mg–Saffil fibre composites
282
Thermal expansion behaviour of Mg–Saffil fibre composites
283
Thermal expansion behaviour of Mg–Saffil fibre composites
284
Thermal expansion behaviour of sodium zirconium phosphate structure type phosphates containing tin
285
Thermal expansion behaviour of Sr- and Mg-doped LaGaO3 solid electrolyte
286
Thermal expansion behaviour of ultra-high modulus carbon fibre reinforced magnesium composite during thermal cycling
287
Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism
288
Thermal expansion characteristics of light-cured dental resins and resin composites
289
Thermal expansion characteristics of quartzite particles up to 1600 °C
290
Thermal expansion coefficient analyses of electroless nickel with varying phosphorous concentrations
291
Thermal expansion coefficient and algebraic models to correct values of specific mass as a function of temperature for corn biodiesel
292
Thermal expansion coefficient and specific heat capacity from sound velocity measurements in tomato paste from 0.1 up to 350 MPa and as a function of temperature Original Research Article
293
Thermal expansion coefficient of alumina films developed by oxidation of a FeCrAl alloy determined by a deflection technique
294
Thermal expansion coefficient of dental composites measured with strain gauges
295
Thermal expansion coefficient of steels used in LWR vessels
296
Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents
297
Thermal expansion in 3d-metal Prussian Blue Analogs—A survey study
298
Thermal expansion in Cr:LiSrGaF6
299
Thermal expansion in single crystals of ϰ-(BEDT-TTF)2Cu(NCS)2 in magnetic fields up to 6 tesla
300
Thermal expansion in solid solution Er2−xSmxW3O12
301
Thermal expansion in the Burns-phase of barium titanate stannate
302
Thermal expansion in YbGaGe
303
Thermal expansion investigation of iron rich glass-ceramic
304
Thermal expansion matching and oxidation resistance of Fe–Ni–Cr interconnect alloys
305
Thermal expansion matching of Gd1−xSrxCoO3−δ composite cathodes to Ce0.8Gd0.2O1.95 IT-SOFC electrolytes
306
Thermal expansion of (Ca1−xPux)TiO3
307
Thermal expansion of a composite of single-walled carbon nanotubes and nanocrystalline aluminum
308
Thermal expansion of a novel hybrid SiC foam–SiC particles–Al composites
309
Thermal expansion of amorphous Zr65AI7.5Cu17.5Ni10 in the vicinity of the glass transition
310
Thermal expansion of an E-glass/vinyl ester composite from 4 to 293 K
311
Thermal expansion of Ba2ZnSi2O7, BaZnSiO4 and the solid solution series BaZn2−xMgxSi2O7 (0≤x≤2) studied by high-temperature X-ray diffraction and dilatometry
312
Thermal expansion of Ca1−xSrxZr4(PO4)6 ceramics
313
Thermal expansion of CaAl4O7-based refractory compositions containing MgO and CaO additions
314
Thermal expansion of CaIrO3 determined by X-ray powder diffraction
315
Thermal expansion of cementite and thermoelastic stresses in white cast iron
316
Thermal expansion of cementite and thermoelastic stresses in white cast iron
317
Thermal expansion of Chromium (Cr) to melting temperature
318
Thermal expansion of Chromium (Cr) to melting temperature
319
Thermal expansion of Cr2xFe2−2xMo3O12, Al2xFe2−2xMo3O12 and Al2xCr2−2xMo3O12 solid solutions
320
Thermal expansion of EB-PVD yttria stabilized zirconia
321
Thermal expansion of forsterite at high pressures determined by in situ X-ray diffraction: The adiabatic geotherm in the upper mantle
322
Thermal expansion of francisite, [Cu3BiO2](SeO3)2Cl, and its interpretation based on oxocentered copper-bismuth tetrahedra
323
Thermal expansion of Gd-doped ceria and reduced ceria
324
Thermal expansion of gehlenite, Ca2Al[AlSiO7], and the related aluminates Ln CaAl[Al2O7] with Ln = Tb, Sm
325
Thermal expansion of gehlenite, Ca2Al[AlSiO7], and the related aluminates Ln CaAl[Al2O7] with Ln =Tb, Sm
326
Thermal expansion of glass–ceramics in the system BaO/Al2O3/B2O3
327
Thermal expansion of hydrated six-coordinate silicon in thaumasite, Ca3Si(OH)6(CO3)(SO4)•12H2O
328
Thermal expansion of hydroxyapatite between − 100 °C and 50 °C
329
Thermal expansion of kyanite at ambient pressure: An X-ray powder diffraction study up to 1000 °C
330
Thermal expansion of La1−xSrxCrO3−δ
331
Thermal expansion of LaBa2Cu2CoO7+δ
332
Thermal expansion of lanthanum silicate oxyapatite (La9.33+2x(SiO4)6O2+3x), lanthanum oxyorthosilicate (La2SiO5) and lanthanum sorosilicate (La2Si2O7)
333
Thermal expansion of MCrAlY alloys
334
Thermal expansion of metal–ceramic composites: a three-dimensional analysis
335
Thermal expansion of metal–ceramic composites: a three-dimensional analysis
336
Thermal expansion of Mg(OH) 2 brucite under high pressure and pressure dependence of entropy
337
Thermal expansion of nanocrystalline boron carbide
338
Thermal Expansion of Periclase (MgO) and Tungsten (W) to Melting Temperatures
339
Thermal expansion of pipe-in-pipe systems
340
Thermal expansion of polycrystals with grain boundary sliding
341
Thermal expansion of polyurethane foam at low temperature
342
Thermal expansion of pre-deformed, short fibre reinforced Mg-based composites
343
Thermal expansion of self-consolidating normal and lightweight aggregate concrete at elevated temperature
344
Thermal expansion of silicon at temperatures up to 1100 °C
345
Thermal Expansion of Simulated Spent PWR Fuel and Simulated DUPIC Fuel
346
Thermal expansion of simulated thoria–urania fuel by high temperature XRD
347
Thermal expansion of slag and fly ash from coal gasification in IGCC power plant
348
Thermal expansion of slate wastes
349
Thermal expansion of solid solutions in apatite binary systems
350
Thermal expansion of Sr- and Mg-doped LaGaO3
351
Thermal Expansion of Synthetic Aragonite Condensed Review of Elastic Properties
352
Thermal expansion of synthetic fused silica as a function of OH content and fictive temperature
353
Thermal expansion of TATB-based explosives from 300 to 566 K
354
Thermal expansion of the LiF(0 0 1) surface
355
Thermal expansion of the magnetorefrigerant Gd5(Si,Ge)4
356
Thermal expansion of the Ti5Si3 and Ti6Si2B phases investigated by high-temperature X-ray diffraction
357
Thermal expansion of the V5Si3 and T2 phases of the V–Si–B system investigated by high-temperature X-ray diffraction
358
Thermal expansion of the W5Si3 and T2 phases of the W–Si–B system investigated by high-temperature X-ray diffraction
359
Thermal expansion of thin C60 films
360
Thermal expansion of ThO2-2, 4 and 6 wt.% UO2 by HT-XRD
361
Thermal expansion of Tribomet MCrAlY coatings
362
Thermal expansion of TRU nitride solid solutions as fuel materials for transmutation of minor actinides
363
Thermal expansion of type A carbonate apatite
364
Thermal expansion of unidirectional and cross-ply fibrous monoliths
365
Thermal expansion of UO2 and simulated DUPIC fuel
366
Thermal expansion of vacuum plasma sprayed coatings
367
Thermal expansion of wadsleyite, ringwoodite, hydrous wadsleyite and hydrous ringwoodite
368
Thermal expansion of zirconia–zirconium titanate materials obtained by slip casting of mixtures of Y-TZP–TiO2
369
Thermal expansion of ZnSiO3 high-pressure phases
370
Thermal expansion of β-eucryptite in oxide-based ceramic composites
371
Thermal expansion properties of Ln2−xCrxMo3O12 (Ln = Er and Y)
372
Thermal expansion properties of stannosilicate molecular sieve with MFI type structure
373
Thermal expansion studies in lead iron niobate — Lead zinc niobate and related systems
374
Thermal expansion studies in the lead iron niobiate — Lead titanate system
375
Thermal expansion studies of Gd2Mo3O12 and Gd2W3O12
376
Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles
377
Thermal expansion studies on Inconel-600® by high temperature X-ray diffraction
378
Thermal expansion studies on UMoO5, UMoO6, Na2U(MoO4)3 and Na4U(MoO4)4
379
Thermal expansion study of spinel-sialon
380
Thermal expansion, strength and oxidation resistance of Mo/Mo5SiB2 in-situ composites at elevated temperatures
381
Thermal expansion/contraction of boron nitride nanotubes in axial, radial and circumferential directions
382
Thermal expansivities in fibrous composites incorporating hybrid interphase regions
383
Thermal expansivity and elastic properties of the lithospheric mantle: results from mineral physics of composites
384
Thermal expansivity of polystyrene determined by multi-frequency dilatometry
385
Thermal expansivity of two-dimensional ice
386
Thermal expansivity under adiabatic condition
387
Thermal experimental results on the prototype for high power neutron converter for low energy proton/deuteron beams
388
Thermal experimental results on the prototype for high power neutron converter for low energy proton/deuteron beams
389
Thermal explosion in multiple phase media Original Research Article
390
Thermal explosion in Ni-Al system: influence of reaction medium microstructure
391
Thermal explosion near bifurcation: stochastic features of ignition
392
Thermal exposure effects on the in vitro degradation and mechanical properties of Mg–Sr and Mg–Ca–Sr biodegradable implant alloys and the role of the microstructure
393
Thermal extraction coupled with gas chromatography–mass spectrometry as a tool for analysing dioxin surrogates and precursors in fly ash
394
Thermal extraction–two-dimensional gas chromatography–mass spectrometry with heart-cutting for nitrogen heterocyclics in biomass burning aerosols
395
Thermal failure of rubber bushing of a Positive Displacement Motor: A study based on thermo-mechanical coupling
396
Thermal failure of the LM117 regulator under harsh space thermal environments
397
Thermal failure under conditions of restrained deformation
398
Thermal fatigue analysis on cracked plenum barrier plate of open-cycle gas turbine frame
399
Thermal fatigue and corrosion fatigue in heat recovery area wall side tubes
400
Thermal fatigue and failure of electronic power device substrates
401
Thermal fatigue and hypothermal atomic oxygen exposure behavior of carbon nanotube wire Original Research Article
402
Thermal fatigue and thermal shock in bedrock: An attempt to unravel the geomorphic processes and products
403
Thermal Fatigue Behavior and Cracking Characteristics of High Si-Mo Nodular Cast Iron for Exhaust Manifolds Original Research Article
404
Thermal fatigue behavior of 3Cr2W8V die steel with biomimetic non-smooth surface
405
Thermal fatigue behavior of an iron-based laser sintered material
406
Thermal fatigue behavior of direct metal deposited H13 tool steel coating on copper alloy substrate
407
Thermal fatigue behavior of gray cast iron with striated biomimetic non-smooth surface
408
Thermal fatigue behavior of medium carbon steel with striated non-smooth surface
409
Thermal fatigue behavior of squeeze cast, discontinuous alumina-silicate fiber-reinforced aluminum alloy (A356) composite
410
Thermal fatigue behavior of squeeze cast, discontinuous alumina-silicate fiber-reinforced aluminum alloy (A356) composite
411
Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying
412
Thermal fatigue behavior of thin-walled cylindrical carbon steel specimens in simulated BWR environment Original Research Article
413
Thermal fatigue behaviors of Sn–4Ag/Cu solder joints at low strain amplitude
414
Thermal fatigue behaviour of a 2014/Al2O3-SiO2 (Saffil® fibers) composite processed by squeeze casting
415
Thermal fatigue behaviour of artificially defected first wall components
416
Thermal fatigue behaviour of different candidate structural materials: a comparative study
417
Thermal fatigue characteristics of gray cast iron with non-smooth surface treated by laser alloying of Cr powder
418
Thermal fatigue characteristics of plasma duplex treated nodular cast irons
419
Thermal fatigue characterization of CFC divertor modules using a one step brazing process
420
Thermal fatigue crack networks parameters and stability: an experimental study
421
Thermal fatigue crack networks: an computational study
422
Thermal fatigue crack nucleation in ferritic–martensitic steels before and after neutron irradiation
423
Thermal fatigue crack propagation behaviour of F82H ferritic steel
424
Thermal fatigue crack propagation in massive cylinders during their cyclic heating
425
Thermal fatigue cracking of surface engineered hot work tool steels
426
Thermal fatigue cracks of fire fighting vehicles gray iron brake discs
427
Thermal fatigue cycling of Be/Cu joining mock-ups
428
Thermal fatigue damage evaluation of a PWR NPP steam generator injection nozzle model subjected to thermal stratification phenomenon
429
Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements
430
Thermal fatigue damage of Cu–Cr–Zr alloys
431
Thermal fatigue damage of the divertor plate
432
Thermal fatigue equipment to test joints of materials for high heat flux components
433
Thermal fatigue evaluation of cylinders and plates subjected to fluid temperature fluctuations
434
Thermal fatigue experiment of screw cooling tube under one-sided heating condition
435
Thermal fatigue failure and design modification of a steam exhaust silencer
436
Thermal fatigue failure induced by delamination in thermal barrier coating
437
Thermal fatigue failure of brass die-casting dies
438
Thermal fatigue failure of fuel spray bars of a jet engine afterburner
439
Thermal Fatigue Life of Thermal Barrier Coatings
440
Thermal fatigue of cast irons for automotive application
441
Thermal fatigue of DEMO first wall due to pulsed operation
442
Thermal fatigue of Fe–Ni–Co–Ti shape-memory-alloys
443
Thermal fatigue of Fe–Ni–Co–Ti shape-memory-alloys
444
Thermal fatigue of HIPed W/Cr–bronze divertor small scale mock-ups
445
Thermal fatigue of HIPed W/Cr–bronze divertor small scale mock-ups
446
Thermal fatigue of HIPed W/Cr–bronze divertor small scale mock-ups
447
Thermal fatigue of materials for die-casting tooling
448
Thermal fatigue of particle reinforced metal–matrix composite induced by laser heating and mechanical load
449
Thermal fatigue of single-crystalline superalloy CMSX-4®: a comparison of epitaxial laser-deposited material with the base single crystal
450
Thermal fatigue of single-crystalline superalloy CMSX-4®: a comparison of epitaxial laser-deposited material with the base single crystal
451
Thermal fatigue on pistons induced by shaped high power laser. Part I: Experimental study of transient temperature field and temperature oscillation
452
Thermal fatigue on pistons induced by shaped high power laser. Part II: Design of spatial intensity distribution via numerical simulation
453
Thermal fatigue performance of Sn–Ag–Cu chip-scale package with underfill
454
Thermal fatigue properties of differently constructed functionally graded materials aimed for refurbishing of pressure-die-casting dies
455
Thermal Fatigue Resistance of Discontinuously Reinforced Cast Aluminum-Matrix Composites
456
Thermal fatigue resistance of gas and plasma nitrided 41CrAlMo7 steel
457
Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying
458
Thermal fatigue resistance of plasma duplex-treated tool steel
459
Thermal fatigue resistance of plasma sprayed yttria-stabilised zirconia onto borided hot work tool steel, bonded with a NiCrAlY coating: Experiments and modelling
460
THERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
461
Thermal fatigue strength of type 304 stainless steel in simulated BWR environment Original Research Article
462
Thermal fatigue striping damage assessment from simple screening criterion to spectrum loading approach
463
Thermal fatigue testing of an ITER primary wall small scale mock up
464
Thermal fatigue testing of chromium martensitic hot-work tool steel after different austenitizing treatments
465
Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as potential tooling materials for thixoforming of steels
466
Thermal fatigue testing of Stellite 6-coated hot work tool steel
467
Thermal fatigue tests on CVD-W/Cu divertor mock-ups
468
Thermal fatigue tests on disruption-damaged first-wall components
469
Thermal fatigue tests with actively cooled divertor mock-ups for ITER
470
Thermal features of spallation window targets
471
Thermal feed-back as the way to reach higher and lower temperature potential in low energy processes
472
Thermal fermionic dispersion relations in a magnetic field Original Research Article
473
Thermal field around a partially debonded spherical particle
474
Thermal field in SOFC fed by hydrogen: Inlet gases temperature effect
475
Thermal field under the effect of the chemical reaction of a direct internal reforming solid oxide fuel cell DIR-SOFC
476
Thermal Field-Flow Fractionation and Gas Chromatography-Mass Spectrometry in Determination of Decomposition Products of Expandable Polystyrene after Reactions in Pressurized Hot Water and Supercritical Water
477
Thermal field-flow fractionation and multiangle light scattering of polyvinyl acetate with broad polydispersity and ultrahigh molecular weight microgel components
478
Thermal fields in laser–multi-layer structures interaction
479
Thermal flow of fluid with magnetic particles in the presence of magnetic field
480
Thermal fluctuation and collisional damping effects in the GDR observables in hot rotating 176W nuclei
481
Thermal fluctuation and upper critical field of MgB2 superconductor
482
Thermal fluctuations and black-hole entropy
483
Thermal fluctuations and their ordering in turbulent convection
484
Thermal fluctuations biased for directional motion in molecular motors
485
Thermal fluctuations effect on the charge density wave dynamics in quasi-one dimensional conductors
486
Thermal fluctuations in pinned elastic systems: field theory of rare events and droplets
487
Thermal fluid dynamic modelling of a water droplet evaporating in air
488
Thermal fluid dynamics analysis of gas–liquid flow on a distillation sieve tray
489
Thermal fluid multiphysics optimization of spherical tokamak centerpost
490
Thermal fluid/solidification analysis of automobile part by horizontal squeeze casting process and experimental evaluation
491
Thermal fluids along the East Anatolian Fault Zone (EAFZ): Geochemical features and relationships with the tectonic setting
492
Thermal fluorescence quenching properties of dissolved organic matter
493
Thermal fluorination effects on carbon nanotubes for preparation of a high-performance gas sensor Original Research Article
494
Thermal flutter analysis of large-scale space structures based on finite element method
495
Thermal fluxes due to plasma-wall interactions: Experimental measurements and numerical analyses
496
Thermal fluxes from the human body
497
Thermal flywheel effects on the time varying conduction heat transfer through structural walls
498
Thermal food processing optimization: Algorithms and software Original Research Article
499
Thermal force effects on slowly rotating, spherical artificial satellites—I. Solar heating
500
Thermal force effects on slowly rotating, spherical artificial satellites—II. Earth infrared heating
501
Thermal force perturbations of the LAGEOS orbit: the albedo radiation part
502
Thermal forcing for a global ocean circulation model using a three-year climatology of ECMWF analyses
503
Thermal formation mechanism and size control of spherical hematite nanoparticles
504
Thermal formation of PBDD/F from tetrabromobisphenol A––a comparison of polymer linked TBBP A with its additive incorporation in thermoplastics
505
Thermal Forming of Glass Microsheets for X-ray Telescope Mirror Segments
506
Thermal fractionation and effect of comonomer distribution on the crystal structure of ethylene–propylene copolymers
507
Thermal fractionation of polymers
508
Thermal fracture analysis of nonhomogeneous piezoelectric materials using an interaction energy integral method
509
Thermal fracture analysis of orthotropic functionally graded materials using an equivalent domain integral approach
510
Thermal fracture behavior of metal/ceramic functionally graded materials
511
Thermal fracture characteristics induced by laser beam
512
THERMAL FRACTURE IN A BIOMATERIAL DURING RAPID FREEZING
513
Thermal fracture interference: a two-dimensional boundary element approach
514
Thermal fracture model for a functionally graded plate with a crack normal to the surfaces and arbitrary thermomechanical properties
515
Thermal fracture of ceramic thermal barrier coatings under high heat flux with time-dependent behavior.: Part 1. Experimental results
516
Thermal fracture of ceramic thermal barrier coatings under high heat flux with time-dependent behavior.: Part 1. Experimental results
517
THERMAL FRACTURE OF CERAMICS WITH TEMPERATURE-DEPENDENT PROPERTIES
518
Thermal fracture of functionally graded plate with parallel surface cracks
519
Thermal fracture of interfaces in precracked thermal barrier coatings
520
Thermal fracture of interfaces in precracked thermal barrier coatings
521
Thermal fracture of zirconia–mullite composite thermal barrier coatings under thermal shock: A numerical study
522
Thermal fracture of zirconia–mullite composite thermal barrier coatings under thermal shock: An experimental study
523
Thermal fracture resistance of a functionally graded coating with periodic edge cracks
524
Thermal fragmentation and deactivation of combustion-generated soot particles
525
Thermal fragmentation and rearrangement of 2-(arylidenehydrazino)-4-(5H)-thiazolone derivatives: synthesis of 1,2,4-triazoles
526
Thermal fragmentation and rearrangement of N-arylbenzamidoxime and O-phenylsulfonyloxime derivatives
527
Thermal fragmentation and rearrangement of N-arylbenzamidoxime and O-phenylsulfonyloxime derivatives
528
Thermal fragmentation and rearrangement of some N-phenylbenzamide oxime dervatives II. Synthesis of benzimidazoles
529
Thermal fragmentation and rearrangement of some N-phenylbenzamide oxime dervatives II. Synthesis of benzimidazoles
530
Thermal frequency response studies of a hollow cylinder subject to loads of different amplitude and shape Original Research Article
531
Thermal frequency–response characteristic of a solid slab
532
Thermal friction and Brownian motion of interstitial defects in irradiated materials
533
Thermal front variability along the North Atlantic Current observed using microwave and infrared satellite data
534
Thermal gap conductance at low contact pressures (<1 MPa): Effect of gold plating and plating thickness
535
Thermal gasification behavior of plastics with flame retardant
536
Thermal gasification of biomass technology developments: End of task report for 1992 to 1994
537
Thermal gasification or direct combustion? Comparison of advanced cogeneration systems in the sugarcane industry
538
Thermal gas-phase reaction of perfluorobuta-1,3-diene with NO2
539
Thermal gelation characteristics of breast and thigh muscles of spent hen and broiler and their surimi
540
Thermal gelation of aqueous hydroxypropylmethylcellulose solutions with SDS and hydrophobic drug particles
541
Thermal gelation properties and quality characteristics of duck surimi-like material (duckrimi) as affected by the selected washing processes
542
Thermal gelation properties of two different composition sardine (Sardina pilchardus) muscles with addition of non-muscle proteins and hydrocolloids
543
Thermal generalized stress intensity factors in 2-D domains Original Research Article
544
Thermal generating unit commitment using an extended mean field annealing neural network
545
Thermal generation of pentacene from soluble precursors through expulsion of carbon dioxide
546
Thermal genesis course and characterization of lanthanum oxide
547
Thermal genesis course and characterization of praseodymium oxide from praseodymium nitrate hydrate
548
Thermal genesis, characterization, and electrical conductivity measurements of terbium oxide catalyst obtained from terbium acetate
549
Thermal gluo-magnetic vacuum of SU(N) gauge theory
550
Thermal glycosylation and degradation reactions occurring at the reducing ends of cellulose during low-temperature pyrolysis Original Research Article
551
Thermal glycosylations: Reactions of β-cellobiosyl fluoride heptaacetate with tigogenin and its trimethylsilyl ether
552
Thermal gradient mass transfer of type 316L stainless steel and alloy 718 in flowing mercury
553
Thermal gradients and residual stresses in veneered Y-TZP frameworks
554
Thermal gradients as a tool for estimating groundwater advective rates in a coastal estuary: White Oak River, North Carolina, USA
555
Thermal gradients in round TMF specimens
556
Thermal graft copolymerization of 4-vinyl pyridine on polyimide to improve adhesion to copper
557
Thermal graft copolymerization-induced adhesion improvement of a FR-4®/PETG® laminate
558
Thermal graft copolymerization-induced adhesion improvement of a FR-4®/PETG® laminate
559
Thermal grain boundary grooving with anisotropic surface free energies Original Research Article
560
Thermal grating effects in infrared degenerate four-wave mixing fro trace gas detection
561
Thermal gravity analysis for the study of stability of graphene oxide–glycine nanocomposites
562
Thermal green functions at zero energy Original Research Article
563
Thermal Greenʹs Functions for a Heat Source in a Piezoelectric Solid with a Parabolic Boundary
564
Thermal grooving at the interface between alumina and monazite Original Research Article
565
Thermal Growth of a Vapor Bubble Moving in a Superheated Liquid
566
Thermal habitat and life history of two congeneric species of darkling beetles (Coleoptera: Tenebrionidae) on Tenerife (Canary Islands)
567
Thermal habitat constraints on zooplankton species associated with Atlantic cod (Gadus morhua) on the US Northeast Continental Shelf
568
THERMAL HARDENING FOR SEED VIGOUR AND SALT TOLERANCE IN CABBAGE
569
Thermal hazard analysis of cyclohexanone peroxide and its solutions
570
Thermal healing of the sub-surface damage layer in sapphire
571
Thermal heat performance enhancement by interaction between the radiation and convection in solar air heaters
572
Thermal heat processing effects on antinutrients, protein and starch digestibility of food legumes
573
Thermal Heat Transfer Enhancement Analysis of Magnetic Ternary Hybrid Nanofluid in a Hexagonal Cavity with Square Obstacle
574
Thermal heating of controlled environment greenhouse: a transient analysis
575
Thermal helium desorption behavior in advanced ferritic steels Original Research Article
576
Thermal helium desorption spectrometry of helium-implanted iron
577
Thermal Hetero [3 + 2] Cycloaddition of Dipolar Trimethylenemethane to N-Sulfonyl and N-Acyl Imines. Synthesis of (gamma)-Amino Acid Derivatives
578
Thermal heterogeneity in stable human coronary atherosclerotic plaques is underestimated in vivo: the “cooling effect” of blood flow
579
Thermal history analysis of friction stir processed and submerged friction stir processed aluminum
580
Thermal history and dielectric behavior in the incommensurate phase of TlGaSe2
581
Thermal history and origin of the Tanzanian Craton from Pb isotope thermochronology of feldspars from lower crustal xenoliths
582
Thermal history and source rock characterization of a Paleozoic section in the Awbari Trough, Murzuq Basin, SW Libya
583
Thermal history and tensile strength determination from fracture surface analysis
584
Thermal history effects of Cu–Al–Ni shape memory alloys powder particles compared with single crystals behaviour
585
Thermal history effects on crystallisation and melting of poly(3-hydroxybutyrate)
586
Thermal history effects on the ionic conductivity of PEO-salt electrolytes
587
Thermal history influences diapause development in the solitary bee Megachile rotundata
588
Thermal history modelling: HeFTy vs. QTQt
589
Thermal history of Acapulco and ALHA81261 acapulcoites constrained by Fe2+Mg ordering in orthopyroxene
590
Thermal history of carbon-fiber polymer-matrix composite, evaluated by electrical resistance measurement
591
Thermal history of diamond from Arkhangelskaya and Karpinsky-I kimberlite pipes
592
Thermal history of Hawaiian pāhoehoe lava crusts at the glass transition: implications for flow rheology and emplacement
593
Thermal history of low metamorphic grade Paleoproterozoic sedimentary rocks of the Penokean orogen, Lake Superior region: Evidence for a widespread 1786 Ma overprint based on xenotime geochronology
594
Thermal history of the Earth and its petrological expression
595
Thermal history of the Rio Muni (West Africa)–NE Brazil margins during continental breakup
596
Thermal history of the unsaturated zone at Yucca Mountain, Nevada, USA
597
Thermal history of the Vestfold Hills (East Antarctica) between Lambert rifting and Gondwana break-up, evidence from apatite fission track data
598
Thermal history simulation of Czochralski silicon crystals and its application to the study of defects formation during crystal growth
599
Thermal history, partial preservation and sampling bias recorded by Stardust cometary grains during their capture
600
THERMAL HISTORY: A new software to interpret diffusive zoning profiles in garnet
601
Thermal hole shifts in the optical spectra of a dye-doped amorphous polymer
602
Thermal hydraulic analysis and control of the HELOKA water cooling system
603
Thermal hydraulic analysis for grid supported pressurized water reactor cores Original Research Article
604
Thermal hydraulic analysis for hot gas mixing structure of HTR-PM
605
Thermal hydraulic analysis of a pebble-bed modular high temperature gas-cooled reactor with ATTICA3D and THERMIX codes
606
Thermal hydraulic analysis of the AHWR—The Indian thorium fuelled innovative nuclear reactor
607
Thermal hydraulic analysis of the IPR-R1 TRIGA research reactor using a RELAP5 model Original Research Article
608
Thermal hydraulic behavior in the deteriorated turbulent heat transfer regime for a gas-cooled reactor Original Research Article
609
Thermal hydraulic behaviors during loss of RHR system at mid-loop operation of Chinese 300 MWe PWR NPP Original Research Article
610
Thermal hydraulic behaviors during loss of shutdown cooling system at HTS opened under LLDS
611
Thermal hydraulic calculation of the HTR-10 for the initial and equilibrium core Original Research Article
612
Thermal hydraulic challenges of Gas Cooled Fast Reactors with passive safety features Original Research Article
613
Thermal hydraulic characteristics during ingress of coolant and loss of vacuum events in fusion reactors
614
Thermal hydraulic design and decay heat removal of a solid target for a spallation neutron source
615
Thermal hydraulic design of a hydride-fueled inverted PWR core Original Research Article
616
Thermal hydraulic design of a liquid salt-cooled flexible conversion ratio fast reactor Original Research Article
617
Thermal hydraulic feasibility analysis of the IBED PHTS for ITER
618
Thermal hydraulic instrumentation system of the HTR-10 Original Research Article
619
Thermal hydraulic investigations of an extended station blackout event in FBTR
620
Thermal hydraulic model validation for HOR mixed core fuel management Original Research Article
621
Thermal hydraulic performance analysis of a printed circuit heat exchanger using a helium–water test loop and numerical simulations
622
Thermal hydraulic performance analysis of the printed circuit heat exchanger using a helium test facility and CFD simulations Original Research Article
623
Thermal hydraulic performance assessment of dual-cooled annular nuclear fuel for OPR-1000
624
Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchanger
625
Thermal hydraulic performance testing of printed circuit heat exchangers in a high-temperature helium test facility
626
THERMAL HYDRAULIC PHENOMENA IN A WATER POOL DUE TO AIR BUBBLE OSCILLATION
627
Thermal hydraulic study of the neutron production target at the Los Alamos Neutron Scattering Center
628
Thermal hydraulic study on a high-temperature gas–gas heat exchanger with helically coiled tube bundles Original Research Article
629
Thermal hydraulic test with 6 MPa nitrogen gas loop for developing the Korean He cooled test blanket
630
Thermal hydraulic transient analysis of the HTR-10 Original Research Article
631
Thermal hydraulics and mass transfer of the coolant-out-of-tube blanket model
632
Thermal hydraulics of PWRS with respect to boron dilution phenomena. Experimental results from the test facilities PKL and UPTF Original Research Article
633
Thermal hydraulics of rod bundles: The effect of eccentricity
634
Thermal hydraulics of the spallation target module of an accelerator driven sub-critical system: A numerical study
635
Thermal hydraulics of water cooled divertors
636
Thermal hydrocracking of Cold Lake vacuum bottoms asphaltenes and their subcomponents
637
Thermal hydrodehalogenation of 2,4-dibromophenol by polymeric materials
638
Thermal hydrodehalogenation of 2,4-dibromophenol by polymeric materials
639
Thermal hydrodynamic fluctuations of polymer globules
640
Thermal Hydrodynamical Analysis of a Countercurrent Gas Centrifuge
641
Thermal Hydrogen Reduction for Synthesis of Gold Nanoparticles in the Nanochannels of Mesoporous Silica Composite
642
Thermal hydrolysis (TDH) as a pretreatment method for the digestion of organic waste
643
Thermal hydrolysis integration in the anaerobic digestion process of different solid wastes: Energy and economic feasibility study
644
Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects
645
Thermal hydrotherapy improves quality of life and hemodynamic function in patients with chronic heart failure
646
Thermal hysteresis caused by non-equilibrium antifreeze activity of poly(vinyl alcohol)
647
Thermal hysteresis loop of the spin-state in nanoparticles of transition metal complexes: Monte Carlo simulations on an Ising-like model
648
Thermal identification of goethite in soils and sediments by diffuse reflectance spectroscopy
649
Thermal ignition analysis of a monodisperse spray with radiation
650
Thermal illuminators for far-infrared and submillimeter astronomical instruments
651
Thermal Image and Leakage Current Diagnostic as a Tool for Testing and Condition Monitoring of ZnO Surge Arrester
652
Thermal Image‐Based Temperament Classification by Genetic Algorithm and Adaboost Classifier
653
Thermal imaging and analysis of short-lived Vulcanian explosions at Volcلn de Colima, Mexico
654
Thermal imaging and Thermoelastic Stress Analysis of impact damage of composite materials
655
Thermal imaging camera with linear Pb1−xSnxSe-on-Si infrared sensor array and combined JFET/CMOS read-out electronics
656
Thermal imaging camera with linear Pb1−xSnxSe-on-Si infrared sensor array and combined JFET/CMOS read-out electronics
657
Thermal imaging display
658
Thermal imaging in Paget’s disease of bone
659
Thermal imaging of a vein of the forearm: Analysis and thermal modelling
660
Thermal imaging of alluvial fans: A new technique for remote classification of sedimentary features
661
Thermal imaging of microwave fields inside the surfatron and the microwave plasma torch
662
Thermal imaging of sedimentary features on alluvial fans
663
Thermal Imaging tudy Comparing Phacoemulification With the overeign With Whitetar ytem to the Legacy With AdvanTec and NeooniX ytem
664
Thermal imidization of poly(amic acid) precursors on glycidyl methacrylate (GMA) graft-polymerized aluminium and copper surfaces
665
Thermal imidization of poly(pyromellitic dianhydride-4,4′-oxydianiline) precursors on fluoropolymers modified by surface graft-copolymerization with glycidyl methacrylate
666
Thermal impact of the products pipeline on the crude oil pipeline laid in one ditch – The effect of pipeline interval
667
Thermal impedance spectroscopy for Li-ion batteries using heat-pulse response analysis
668
Thermal impedances of thin plates
669
Thermal imprint of rift-related processes in orogens as recorded in the Pyrenees
670
Thermal imprint techniques for preparation of superhydrophobic polymer coatings
671
Thermal in vivo skin electroporation pore development and charged macromolecule transdermal delivery: A numerical study of the influence of chemically enhanced lower lipid phase transition temperatures
672
Thermal Inactivation and Aggregation of Lysozyme in the Presence of Nano- TiO2 and Nano-SiO2 in Neutral pH
673
Thermal inactivation and growth potential of Listeria innocua in rehydrated salt-cured cod prepared for ready-to-eat products
674
Thermal inactivation characteristics of acid and alkaline phosphatase in fish and shellfish
675
Thermal inactivation kinetic modeling of human norovirus surrogates in blue mussel (Mytilus edulis) homogenate
676
Thermal inactivation kinetics of hepatitis A virus in spinach
677
Thermal inactivation kinetics of peroxidase in mint leaves Original Research Article
678
Thermal inactivation kinetics of Rabdosia serra (Maxim.) Hara leaf peroxidase and polyphenol oxidase and comparative evaluation of drying methods on leaf phenolic profile and bioactivities
679
Thermal Inactivation Kinetics of Salmonella and Listeria in Ground Chicken Breast Meat and Liquid Medium
680
Thermal inactivation kinetics of vegetable peroxidases Original Research Article
681
Thermal inactivation of airborne viable Bacillus subtilis spores by short-term exposure in axially heated air flow
682
Thermal inactivation of Alicyclobacillus acidoterrestris spores under different temperature, soluble solids and pH conditions for the design of fruit processes
683
Thermal inactivation of Bacillus cereus and Clostridium perfringens vegetative cells and spores in pork luncheon roll
684
Thermal inactivation of Bacillus cereus spores affected by the solutes used to control water activity of the heating medium
685
Thermal inactivation of Bacillus cereus spores formed at different temperatures
686
Thermal inactivation of Botrytis cinerea conidia in synthetic medium and strawberry puree
687
Thermal inactivation of compost suppressiveness implicates possible biological factors in disease management
688
Thermal inactivation of Escherichia coli O157:H7 and Salmonella on catfish and tilapia Original Research Article
689
Thermal inactivation of exogenous pectin methylesterase in apple and cloudberry juices Original Research Article
690
Thermal inactivation of lactoperoxidase in goat, sheep and bovine milk – A comparative kinetic and thermodynamic study Original Research Article
691
Thermal inactivation of lipoxygenase and hydroperoxytrienoic acid lyase in tomatoes
692
Thermal inactivation of Listeria monocytogenes from alheiras, traditional Portuguese sausage during cooking
693
Thermal inactivation of Listeria monocytogenes in ground beef under isothermal and dynamic temperature conditions Original Research Article
694
Thermal inactivation of Pediococcus sp. in simulated apple cider during high-temperature short-time pasteurization
695
Thermal inactivation of poliovirus type 1 in water, milk and yoghurt
696
Thermal Inactivation of Salmonella spp. and Listeria innocua in the Chicken Breast Patties Processed in a Pilot-Scale Air-Convection Oven
697
Thermal Inactivation of Salmonella spp. in Chicken Broth, Beef, Pork, Turkey, and Chicken: Determination of D- and Z-values
698
Thermal Inactivation of Salmonella spp., Salmonella typhimurium DT104, and Escherichia coli O 157:H7 in Ground Beef
699
Thermal inactivation of Salmonella Typhimurium in chicken shawirma (gyro)
700
Thermal inactivation of tepary bean (Phaseolus acutifolius), soybean and lima bean protease inhibitors: effect of acidic and basic pH
701
Thermal inactivation of the frozen thawed traditional meat starter culture, Pediococcus pentosaceus, in a meat model system
702
Thermal inactivation of the reductase domain of cytochrome P450 BM3
703
Thermal inactivation of the wine spoilage yeasts Dekkera/Brettanomyces
704
Thermal inactivation of two yeast strains heated in a strawberry product: Experimental data and kinetic model
705
Thermal inactivation of water-borne pathogenic and indicator bacteria at sub-boiling temperatures
706
Thermal inactivation of Yersinia enterocolitica in pork slaughter plant scald tank water
707
Thermal inactivation parameters of spores from different phylogenetic groups of Bacillus cereus
708
Thermal inactivation profiles of Mycobacterium avium subsp. paratuberculosis in lamb skeletal muscle homogenate fluid
709
Thermal inactivation reaction rates for ricin are influenced by pH and carbohydrates
710
Thermal inactivation, denaturation and aggregation of mitochondrial aspartate aminotransferase Original Research Article
711
Thermal indices of upwelling effects on inner-shelf habitats
712
Thermal indoor climate building performance characterized by human comfort response
713
Thermal induced conformational changes involved in the aggregation pathways of beta-lactoglobulin Original Research Article
714
Thermal induced graft polymerization using peroxide onto polypropylene fiber
715
Thermal induced mobility of self-assembled platelets of polyethylene-block-poly(ethylene oxide) in liquid precursors of unsaturated polyester thermoset
716
Thermal induced stress and associated cracking in cement-based composite at elevated temperatures––Part I: Thermal cracking around single inclusion
717
Thermal induced stress and associated cracking in cement-based composite at elevated temperatures––Part II: thermal cracking around multiple inclusions
718
Thermal induced structural rearrangement of cardo-copolybenzoxazole membranes for enhanced gas transport properties
719
Thermal induced transition in the bonding nature of C60 molecules adsorbed on a Si(111)–(7×7) surface
720
Thermal inefficiency model for determination of the bed-to-gas heat transfer coefficients with effectiveness factor in a fluidised bed
721
Thermal inertia and bolometric Bond albedo values for Mimas, Enceladus, Tethys, Dione, Rhea and Iapetus as derived from Cassini/CIRS measurements
722
Thermal inertia and surface roughness of Comet 9P/Tempel 1
723
Thermal inertia of main belt asteroids smaller than 100 km from IRAS data
724
Thermal inertia of near-Earth asteroids and implications for the magnitude of the Yarkovsky effect
725
Thermal influence of cutting tool coatings
726
Thermal influence on defensive behaviours of the Eastern garter snake,Thamnophis sirtalis
727
Thermal influence on torque transfer of wet clutches in limited slip differential applications
728
Thermal Infrared (3–14 μm) bidirectional reflectance measurements of sands and soils
729
Thermal infrared (8–13 μm) spectra of 29 asteroids: the Cornell Mid-Infrared Asteroid Spectroscopy (MIDAS) Survey
730
Thermal infrared and optical observations of four near-Earth asteroids
731
Thermal Infrared Exposure of Cryogenic Indirect Drive ICF Targets
732
Thermal infrared image analysis of a quiescent cone on Piton de la Fournaise volcano: Evidence of convective air flow within an unconsolidated soil
733
Thermal infrared mapping of White Island volcano, New Zealand
734
Thermal infrared observations and thermophysical characterization of OSIRIS-REx target asteroid (101955) Bennu
735
Thermal infrared radiometric calibration of the entire Landsat 4, 5, and 7 archive (1982–2010)
736
Thermal infrared remote sensing for urban climate and environmental studies: Methods, applications, and trends
737
Thermal infrared remote sensing of volcanic emissions using the moderate resolution imaging spectroradiometer
738
Thermal infrared spectra of experimentally shocked andesine anorthosite
739
Thermal infrared spectroscopy on feldspars — Successes, limitations and their implications for remote sensing
740
Thermal infrared spectroscopy to investigate the composition of mercury – The MERTIS instrument on BepiColombo Original Research Article
741
Thermal initiation of consolidated nanocomposite thermites
742
Thermal injection current in 3C-SiC pn structures
743
Thermal injection current in 3C-SiC pn structures
744
Thermal injuries due to paint thinner
745
Thermal injuries in autogenous tissue breast reconstruction
746
Thermal Injury Caued by Chandelier Fiber Probe
747
Thermal Injury in Newborns and Infants within the First 6 Months of Life
748
Thermal injury induces expression of CD14 in human skin
749
Thermal ink jet technology
750
Thermal inkjet microdeposition of PEDOT:PSS on ITO-coated glass and characterization of the obtained film
751
Thermal inkjet printing of thin-film electrolytes and buffering layers for solid oxide fuel cells with improved performance
752
Thermal instabilities in a horizontal cylindrical duct: a physical approach
753
Thermal instability in a magnetically levitated doubly overhung rotor
754
Thermal instability in a plane channel with internal heating and horizontal Poiseuille throughflow
755
Thermal instability in a porous medium layer saturated by a nanofluid
756
Thermal instability in freshwater lakes under ice: Effect of salt gradients or solar radiation?
757
Thermal Instability of a Finite-Larmor-Radius Hall Plasma Under Rotation and Variable Gravitational Field in Porous Medium
758
Thermal Instability of a Walters (Model B) Elastico-Viscous Fluid in the Presence of Variable Gravity Field and Rotation in Porous Medium
759
Thermal Instability of Functionally Graded Shallow Spherical Shell
760
Thermal instability of gold nanorods in micellar solution of water/glycerol mixtures
761
Thermal instability of low voltage power-MOSFETs
762
Thermal instability of molybdenum and silicon tips
763
Thermal instability of molybdenum and silicon tips
764
Thermal instability of nanofluids in natural convection
765
Thermal instability of viscoelastic fluids in horizontal porous layers as initial value problem
766
Thermal instability of viscoelastic fluids in porous media
767
Thermal insulating foamy geopolymers from perlite
768
Thermal insulation behavior of a multi-layer orthotropic cylinder
769
Thermal insulation capability of PEG-containing polyurethane foams
770
Thermal insulation enhancement in concretes by adding waste PET and rubber pieces
771
Thermal insulation of cooled spaces in high rise residential buildings in Hong Kong
772
Thermal insulation of the intertidal zone by the ice foot
773
THERMAL INSULATION PROPERTIES OF BHREATHNABLE MEMBRANS INSIDE OF PROTECTIVE CLOTHING
774
Thermal insulation requirements and new cardboard packaging for chilled seafood exports Original Research Article
775
Thermal Insulation Systems for Bioremediation in Cold Regions
776
Thermal insulators made with rice husk ashes: Production and correlation between properties and microstructure
777
Thermal integration of a cylindrically symmetric methanol fuel processor for portable fuel cell power
778
Thermal integration of a metal hydride storage unit and a PEM fuel cell stack
779
Thermal integration of multiple effect evaporator in sugar plant
780
Thermal integration of trigeneration systems
781
Thermal Intensity Factors for a Parallel Crack in a Functionally Graded Piezoelectric Strip
782
Thermal Interaction Between Molten Metal Jet and Sodium Pool: Effect of Principal Factors Governing Fragmentation of the Jet
783
Thermal interaction between some oxides and zircon as a material for diesel engines filter
784
Thermal interaction effect on nucleation site distribution in subcooled boiling
785
Thermal interaction in crusted melt jets with large-scale structures
786
Thermal interaction in crusted melt jets with large-scale structures
787
Thermal interaction in crusted melt jets with large-scale structures Original Research Article
788
Thermal interaction of plasma with Gas Puffing
789
Thermal interactions of the Huygens probe with the Titan environment: Constraint on near-surface wind
790
Thermal interface gel
791
Thermal intramolecular cycloaddition of 4-alkenylfulvene; highly regio- and diastereoselective formation of [4+2] adduct
792
Thermal Intro Row Weed Control Optimized Machine with Image Processing
793
Thermal investigation and infrared evolved gas analysis of light lanthanide(III) complexes with pyridine-3,5-dicarboxylic acid
794
Thermal investigation and infrared evolved gas analysis of light lanthanide(III) complexes with pyridine-3,5-dicarboxylic acid
795
Thermal investigation and infrared evolved gas analysis of solid trivalent lanthanide and yttrium α-hydroxyisobutyrates in N2 and CO2 atmospheres
796
Thermal investigation and infrared evolved gas analysis of solid trivalent lanthanide and yttrium α-hydroxyisobutyrates in N2 and CO2 atmospheres
797
Thermal investigation of a high brightness LED array package assembly for various placement algorithms
798
Thermal investigation of Human Serum Albumin upon Interaction with Ytterbium (III)
799
Thermal investigation of PCM-based high temperature thermal energy storage in packed bed
800
Thermal investigation of Seyitomer oil shale
801
Thermal Investigation of Single Slope Solar Still by Using Energy Storage Material
802
Thermal investigation of some mixed-ligand copper(II) chelates containing 1,2-diamines and β-ketoenols
803
Thermal investigation of two FePO materials prepared in the presence of 1,2-diaminoethane
804
Thermal investigation of uncased and cased tobacco
805
Thermal investigations of a nest of the stingless bee Tetragonisca angustula Illiger in Colombia
806
Thermal investigations of amber and copal
807
Thermal investigations of an experimental active magnetic regenerative refrigerator operating near room temperature
808
Thermal investigations of CoAPO materials prepared by using piperidine as a structure-directing agent
809
Thermal investigations of direct iron ore reduction with coal
810
Thermal investigations of some bird nests
811
Thermal investigations of transitional metal oxide cathodes in Li-ion cells
812
Thermal investigations on LED vapor chamber-based plates
813
Thermal ion emission from crystalline SrCl2 at the temperatures of phase transition to the superionic state
814
Thermal ionisation of ground and multiply excited states in InAs quantum dots embedded into InGaAs/GaAs MQW
815
Thermal ionization in hydrogen plasma simulated using Feynman path integrals
816
Thermal Ionization Ion Mobility Spectrometry of Alkali Salts
817
Thermal IR satellite data application for earthquake research in Japan and China
818
Thermal iron Kα line emission from the X-ray binary
819
Thermal irreversibility study on the electrocyclic reaction of diaryl maleic anhydrides by density functional calculations
820
Thermal isocreep curves obtained during multi-axial creep tests on recrystallized Zircaloy-4 and M5™ alloy
821
Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials
822
Thermal isomerisation of β-N-oxalyl-L-α, β-diaminopropionic acid, the neurotoxin in Lathyrus sativus, during cooking
823
Thermal isomerization of 1,2-diadamantoyltetrakis(trimethylsilyl)disilane via a 2,3-disilabutadiene intermediate
824
Thermal isomerization of a symmetrical carbocyanine molecule: charge transfer aspects
825
Thermal isomerization of cis-[Fe(cyclam)Cl2]Cl·H2O complex in the solid state
826
Thermal isomerization of dewarbenzene derivatives
827
Thermal isomerization of trifluoromethyl trifluorovinyl ether to pentafluoropropionyl fluoride
828
Thermal isomerizations of cis,anti,cis-tricyclo[6.4.0.02,7]dodec-3-ene to trans- and cis,endo-tricyclo[6.2.2.02,7]dodec-9-ene: diradical conformations and stereochemical outcomes in [1,3] carbon shifts
829
Thermal isostasy and deformation of possible paleoshorelines on Mars
830
Thermal issues in machine tools
831
Thermal kaon production in relativistic heavy-ion collisions Original Research Article
832
Thermal kinetic analysis of InN by TG–MS combined with PulseTA
833
Thermal kinetic parameters and evolved gas analysis (TG–FTIR–MS) for thiourea–formaldehyde based polymer metal complexes
834
Thermal kinetic parameters and evolved gas analysis (TG–FTIR–MS) for thiourea–formaldehyde based polymer metal complexes
835
Thermal kinetic TG-analysis of metal oxalate complexes
836
Thermal kinetic TG-analysis of the mixed-ligand copper(II) and nickel(II) complexes of N-(1-phenyl-3-methyl-4-benzylidene-5-pyrazolone) p-nitrobezoylhydrazide and pyridine
837
Thermal Kinetics of Color Change, Rheology, and Storage Characteristics of Garlic Puree/Paste
838
Thermal Kinetics of Colour Degradation and Storage Characteristics of Onion Paste
839
Thermal kinetics of protective oxide layer formation in the dry sliding of metallic tribo-specimens
840
Thermal kinetics of pungency loss in relation to the quality of pickled garlic
841
Thermal lag analysis on a simulated TGA-DSC device
842
Thermal lag and decrement factor of a coconut-ferrocement roofing system
843
Thermal lagging in living biological tissue based on nonequilibrium heat transfer between tissue, arterial and venous bloods
844
Thermal lagging in multi-carrier systems
845
Thermal laser micro-adjustment using picosecond pulse durations
846
Thermal lattice expansion behavior of Yb-doped BaCeO3
847
Thermal lattice fluctuations in (TaSe4)2l
848
Thermal lattice-BGK model based on large-eddy simulation of turbulent natural convection due to internal heat generation
849
Thermal lattice-Boltzmann method for non-ideal gases with potential energy Original Research Article
850
Thermal lens and non-linear optical absorption study of a-SiH films
851
Thermal lens and Z-scan measurements: Thermal and optical properties of laser glasses – A review
852
Thermal lens determination of LD end-pumped solid-state laser with stable resonator by slit scanning method
853
Thermal lens investigation in amorphous SiN
854
Thermal lens investigation of the temperature dependence of the refractive index of aqueous electrolyte solutions
855
Thermal lens investigation of the temperature dependence of the refractive index of organo–aqueous solutions Original Research Article
856
Thermal lens measurements of fluorescence quantum efficiency in Nd3+-doped fluoride glasses
857
Thermal lens probing of distant dependent fluorescence quenching of Rhodamine 6G by silver nanoparticles
858
Thermal lens spectrometric determination of hexavalent chromium
859
Thermal lens study of PbO–Bi2O3–Ga2O3–BaO glasses doped with Yb3+
860
Thermal lensing and absorbance spectra of a fluorescent dye solution
861
Thermal lensing of diode side-pumped solid-state lasers
862
Thermal lensing study on the vibrational relaxation of highly excited chlorofluoroethane
863
Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking
864
Thermal life evaluation of high temperature insulation systems and hybrid insulation systems in mineral oil
865
Thermal limitation of carp (Cyprinus carpio L.) larvae survival in ponds of the temperate climate
866
Thermal limitation of the mean power rating of coaxial transmission lines for ICRH
867
Thermal link for cartridge-type cryostat Original Research Article
868
Thermal load deviation model for superheater and reheater of a utility boiler
869
Thermal load distribution near the tips of the ALT-II limiter roof on TEXTOR-94
870
Thermal load distribution on the ALT-II limiter of TEXTOR-94 during disruptions
871
Thermal load distribution on the ALTII limiter of TEXTOR-94 during RI mode operation and during disruptions
872
Thermal load of tuned piston
873
Thermal load testing of erosion-monitoring beryllium marker tile for the ITER-Like Wall Project at JET
874
Thermal Loading and Material Property Characterization of a Functionally Graded Plate With a Hole Using an Inverse Problem Methodology
875
Thermal Loading as a Causal Factor in Exceeding the 0.1 PPM Laboratory Fume Hood Control Level
876
Thermal loading in multi-layered and/or functionally graded materials: Residual stress field, delamination, fatigue and related size effects
877
Thermal loading induced near-infrared broadband upconversion emission of Sm3+-doped β-NaYbF4 nano-phosphors
878
Thermal loading of smectite-rich rocks: Natural processes vs. laboratory experiments
879
Thermal loading studies using the Yucca Mountain unsaturated zone model
880
Thermal Loads and Surface Quality Evaluation in Machining of Hardened Die Steel under Dry and Cryogenic Machining
881
Thermal localization as a potential mechanism to rift cratons
882
Thermal loss of life and load-carrying capacity of marine induction motors
883
Thermal low spin–high spin equilibrium of Fe(II) in thiospinels CuFe0.5(Sn(1−x)Tix)1.5S4 (0≤x≤1)
884
Thermal luminescence spectra of lysine and phenylalanine in O2 measured with a Fourier-transform chemiluminescence spectrometer
885
Thermal magnetic investigation of the decomposition of NixMn1−xC2O4·2H2O
886
Thermal magnetic investigation of the decomposition of NixMn1−xC2O4·2H2O
887
Thermal magnetic properties of Fe films on Cu3Au investigated by magneto optical Kerr effect
888
Thermal management and desorption modeling of a cryo-adsorbent hydrogen storage system
889
Thermal Management for Semiconductor Devices with Conductive Polymers
890
Thermal Management in Catalytic Microreactors
891
Thermal management issues in a PEMFC stack – A brief review of current status
892
Thermal management of a multiple mini-channel heat sink by the integration of a thermal responsive shape memory material
893
Thermal management of a PEMFC stack by 3D nodal modeling
894
Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and fans combined
895
Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control
896
Thermal management of BioMEMS: temperature control for ceramic-based PCR and DNA detection devices
897
Thermal management of electronic components with thermal adaptation composite material
898
Thermal management of high power electronics with phase change cooling
899
Thermal management of high temperature polymer electrolyte membrane fuel cell stacks in the power range of 1–10 kWe
900
Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation
901
Thermal management of microelectronics with electrostatic fluid accelerators
902
Thermal management of power electronics modules packaged by a stacked-plate technique
903
Thermal management of power electronics modules packaged by a stacked-plate technique
904
Thermal management oriented steady state analysis and optimization of a kW scale solid oxide fuel cell stand-alone system for maximum system efficiency
905
Thermal management strategy for a proton exchange membrane fuel cell system with a large active cell area
906
Thermal management using the bi-disperse porous medium approach
907
Thermal manipulation of carbon nanotube fiber by mechanical stretching
908
Thermal mapping and trends of Mars analog materials in sample acquisition operations using experimentation and models
909
Thermal mapping of a scanning thermal microscopy tip
910
Thermal mapping of a scanning thermal microscopy tip
911
Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface
912
Thermal Marangoni flows and macroscopic domain movement in monolayer surface potential experiments
913
Thermal markers arising from changes in the protein component of milk
914
Thermal mass activation by hollow core slab coupled with night ventilation to reduce summer cooling loads
915
Thermal mass and night ventilation as passive cooling design strategy
916
Thermal mass shift of nucleons
917
Thermal maturation, potential source rocks and hydrocarbon generation in Mesozoic rocks, Lougheed Island area, Central Canadian Arctic archipelago
918
Thermal maturity evaluation by sonic log and seismic velocity analysis in parts of Upper Assam Basin, India
919
Thermal maturity history and petroleum generation modelling for the Upper Jurassic Madbi source rocks in the Marib-Shabowah Basin, western Yemen
920
Thermal maturity in the Central European Basin system (Schleswig-Holstein area): results of 1D basin modelling and new maturity maps
921
Thermal maturity in the Shimanto accretionary prism, southwest Japan, with the thermal change of the subducting slab: fluid inclusion and vitrinite reflectance study
922
Thermal maturity in the Shimanto accretionary prism, southwest Japan, with the thermal change of the subducting slab: fluid inclusion and vitrinite reflectance study
923
Thermal maturity of northern Appalachian Basin Devonian shales: Insights from sterane and terpane biomarkers
924
Thermal maturity of type II kerogen from the New Albany Shale assessed by 13C CP/MAS NMR
925
Thermal Maturity, Organic Petrography, Bulk and Compositional Kinetic of Hydrocarbon Generation in Cretaceous-Paleogene Source Rocks from Western Dezful Embayment, SW Iran
926
THERMAL MEASUREMENT ASSOCIATED WITH MATERIAL FAILURE USING THERMOCHROMIC COATINGS
927
Thermal measurement induced disturbance in the Bose-Hubbard Hamiltonian
928
Thermal measurements of curdlan in aqueous suspension during gelation
929
Thermal measurements of dark and bright surface features on Vesta as derived from Dawn/VIR
930
Thermal mechanical analysis of a solid breeding blanket
931
Thermal mechanical analysis of the Enhanced Heat Flux First Wall panel
932
Thermal mechanical anisotropic constitutive model and numerical simulations for shocked β-HMX single crystals
933
Thermal mechanical behavior and microstructure characteristic of microalloyed CrMo steel under cross deformation
934
Thermal Mechanical Stretching to Imprint Pores Morphology of Nitrocellulose Membrane for Immuno- sensing Application
935
Thermal mechanisms in laser ablation of GaAs
936
Thermal melting of solid materials induced by ultrafast laser pulse irradiation as explosively homogeneous nucleation
937
Thermal memory effects modeling and compensation in RF power amplifiers and predistortion linearizers
938
Thermal metamorphism in the lesser Himalaya of Nepal determined from Raman spectroscopy of carbonaceous material
939
Thermal methods for evaluating polymorphic transitions in nifedipine
940
Thermal methods of analysis, principles, applications and problems: Peter J. Haines, Blackie, London, 1995 (ISBN 0-7514-0050-5). 286 pp. Price £ 26.00.
941
Thermal microstress measurements in Al2O3/SiC nanocomposites by Cr3+ fluorescence microscopy
942
Thermal microstructural stability of AZ31 magnesium after severe plastic deformation
943
Thermal mismatch induced disorder of beta-eucryptite and its effect on thermal expansion of beta-eucryptite/Al composites
944
Thermal mismatch stress development in Cu–ZrW2O8 composite investigated by synchrotron X-ray diffraction
945
Thermal mismatch stress of a cylindrical inclusion in a cubic crystal
946
Thermal mixing in a water tank during heating process
947
Thermal mixing of the cross flow over tube bundles
948
Thermal model design and analysis of the high-power LED automotive headlight cooling device
949
Thermal model for curing implantable silicone in the moulding process applied to tracheal stents
950
Thermal model for nanosecond laser sputtering at high fluences
951
Thermal model of a dish/Stirling systems
952
Thermal Model of High-Speed Spindle Units
953
Thermal model of human body fitted with individual characteristics of body temperature regulation
954
Thermal model of Mercury’s surface and subsurface: Impact of subsurface physical heterogeneities on the surface temperature Original Research Article
955
Thermal model of the MUPUS penetrator
956
Thermal model of water and CO activity of Comet C/1995 O1 (Hale-Bopp)
957
Thermal model to investigate the temperature in bone grinding for skull base neurosurgery
958
Thermal modeling and analysis of a quasi-poloidal stellarator modular coil
959
Thermal modeling and design considerations of lithium-ion batteries
960
Thermal modeling and design for microchannel cold plate with high temperature uniformity subjected to multiple heat sources
961
Thermal modeling and experimentation to determine maximum power capability of SCRʹs and thyristors
962
Thermal modeling and organic geochemical appraisal of petroleum source rocks within the Aghajari Oilfield, SW Iran
963
Thermal modeling and parametric studies of a greenhouse fish pond in the Central Himalayan Region
964
Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container
965
THERMAL MODELING AND PERFORMANCE ANALYSIS OF INTERIM DRY STORAGE AND GEOLOGIC DISPOSAL FACILITIES FOR SPENT NUCLEAR FUEL
966
Thermal modeling and temperature control of a PEM fuel cell system for forklift applications
967
Thermal modeling based on solar fraction and experimental study of the annual and seasonal performance of a single slope passive solar still: The effect of water depths Original Research Article
968
Thermal modeling during continuous ultrasonic welding
969
Thermal modeling for greenhouse heating by using thermal curtain and an earth–air heat exchanger
970
Thermal Modeling for Predication of Automobile Cabin Air Temperature
971
Thermal modeling for the motor in semi-hermetic screw refrigeration compressors under part-load conditions
972
Thermal modeling for thermophotovoltaic systems adopting the radiation network method
973
Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater
974
Thermal modeling of a controlled environment greenhouse cum solar distillation for composite and warm humid climates of India Original Research Article
975
Thermal modeling of a greenhouse integrated to an aquifer coupled cavity flow heat exchanger system
976
Thermal modeling of a greenhouse with an integrated earth to air heat exchanger: an experimental validation
977
Thermal modeling of a natural convection greenhouse drying system for jaggery: An experimental validation
978
Thermal modeling of a packed bed thermal energy storage system during charging
979
Thermal modeling of a small anode supported solid oxide fuel cell
980
Thermal modeling of a solid oxide fuel cell and micro gas turbine hybrid power system based on modified LS-SVM
981
Thermal modeling of activated carbon based adsorptive natural gas storage system Original Research Article
982
Thermal modeling of Carboniferous to Triassic sediments of the Karawanken Range (Southern Alps) as a tool for paleogeographic reconstructions in the Alpine-Dinaridic-Pannonian realm
983
Thermal modeling of chemical vapor deposition on the particle surface subjected to nanosecond laser heating
984
Thermal modeling of controlled atmosphere brazing process using virtual reality technology
985
Thermal modeling of cylindrical lithium ion battery during discharge cycle
986
Thermal modeling of gas engine driven air to water heat pump systems in heating mode using genetic algorithm and Artificial Neural Network methods
987
Thermal modeling of LmNi4.91Sn0.15 based solid state hydrogen storage device with embedded cooling tubes
988
Thermal Modeling of Lundell Alternators
989
Thermal Modeling of Mini-Channel and Laminated TypesEvaporator in Mobile Air Conditioning System
990
Thermal modeling of passive and active solar stills for different depths of water by using the concept of solar fraction
991
Thermal modeling of power transformers using evolving fuzzy systems
992
Thermal modeling of power transformers using evolving fuzzy systems
993
Thermal modeling of radiation and convection sections of primary reformer of ammonia plant
994
Thermal modeling of railroad with installed snow melting system
995
Thermal modeling of roadway embankments over permafrost
996
Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications
997
Thermal modeling of selective area laser deposition of titanium nitride on a finite slab with stationary and moving laser beams
998
Thermal Modeling of Snake Infrared Reception: Evidence for Limited Detection Range
999
Thermal modeling of solar stills: an experimental validation
1000
Thermal Modeling of Steady State Contact Resistance Between Two Dissimilar Materials
